DeWalt DW567-220 Instruction manual

DeWalt DW567-220 Instruction manual
ELECTRIC POWER TOOLS
24 Volt 3-Tool Combo Pack
24 Volt 3-Tool Combo Pack
3960CRK
3960CFK
• Includes: 1/2" drill/driver, 6 1/2" circular saw, reciprocating
saw with dual stroke, 2 platinum batteries, 1-hour charger,
side-handle, 2 recip blades, bit, carbide blade, rip fence,
and case
•
•
•
•
•
•
•
1/2" drill/driver with 2-speed gear shift – 0-400/0-1,300 RPM
6 1/2" circular saw with 3,600 RPM
Pivoting head flashlight
2 platinum batteries
1-hour charger
Carbide tipped blade
Case
Order No.
5026.00001
Mfg. No.
3960CFK
Description
24 volt 3-tool combo pack
Order No.
5026.00010
Mfg. No.
3960CRK
Description
24 volt 3-tool combo pack
24 Volt Reciprocating Saw Kit
1645K
24 Volt 2-Tool Combo Pack
3960RK
50
• 1/2" drill/driver, model 3960 – 500" lb of torque, keyless
chuck, and 2-speed gear shift, 0-400/0-1,300 RPM
• Reciprocating saw with dual stroke, model 1645 – tool-less
blade change system, dual stroke provides 2 cutting lengths,
1-1/4" and 3/4", push button foot adjustment, 0-2,300 SPM
• Includes: 2 platinum batteries, 1-hour charger, 2 recip
blades, bit, side-handle and case
Order No.
5026.00004
Mfg. No.
3960RK
Description
24 volt 2-tool combo pack
•
•
•
•
Dual Stroke features 2 cutting lengths 1-1/4", 3/4"
0-2,300 SPM
Blade holder allows up or down cutting
Push button foot adjustment
Order No.
5026.00013
Mfg. No.
1645K
Description
24 volt reciprocating saw kit
24 Volt 6-1/2" Circular Saw Kit
1660K
24 Volt 2-Tool Combo Pack
1660RK
• Electric blade brake for repetitive cuts
• 50° bevel adjustment with 45° positive stop
• Spindle lock for easier blade changes
Order No.
5026.00016
• Includes: 6 1/2" circular saw and reciprocating saw with
Dual Stroke™, 2 platinum batteries, 1-hour charger, 2
recip blades, carbide blade, rip fence, case
698
Order No.
5026.00007
Mfg. No.
1660RK
Description
24 volt 2-tool combo pack
Mfg. No.
1660K
Description
24 volt 6-1/2" circular saw kit
ELECTRIC POWER TOOLS
24 Volt 3/4" Rotary
Hammer
12 Volt Cordless
Drill/Driver Kit
11225VSRH
• No load RPM: 0-1,200; no load
BPM 0-4,400
• Battery level gauge
• Includes: 3.0 A-h battery, 26 minute charger, case
3315K 3/8" Keyless Chuck
• Variable speed reversing
• Includes: two 1.7 A-h
batteries, 1-hour charger
and case
Order No.
5026.00019
Mfg. No.
3315K
No Load RPM
0–400/0–1,200
Weight (lb)
3.7
14.4 Volt Cordless
Drill/Driver Kit
No Load RPM
0–400/0–1,200
No Load RPM
0–1,200
No Load BPM
0–4,400
11225VSR
• Variable speed reversing
• Includes: two (1.7 A-h)
batteries, 1-hour charger
and case
Mfg. No.
3615K
Mfg. No.
11225VSRH
24 Volt 3/4" Rotary
Hammer
3615K 3/8" Keyless Chuck
Order No.
5026.00022
Order No.
5026.00034
Weight (lb)
4.3
14.4 Volt Drill/Driver Kit
3650K 1/2" Keyless Chuck
• Battery gauge; displays
remaining charge level
• Drill or hammer modes; forward reversing switch
• Compact weight: 7.7 lb
• Includes 1.7 A-h battery, 15 minute charger, case
Order No.
5026.00035
Mfg. No.
11225VSR
No Load RPM
0–1,200
No Load BPM
0–4,400
• Exclusive 1/2" keyless
single sleeve chuck
• Includes: two 2.0 A-h
batteries, 1-hour charger
and case
Order No.
5026.00025
Mfg. No.
3650K
No Load RPM
0–500/0–1,500
14.4 Volt Drill/Driver Kit
3655K 1/2" Keyed Chuck
• Variable speed reversing
• Includes: two 2.0 A-h
batteries, 1-hour charger
and case
Order No.
5026.00028
Mfg. No.
3655K
No Load RPM
0–500/0–1,500
50
18 Volt Drill/Driver Kit
Adjustable Clutch,
Heavy-Duty 1/2" Chuck
• High-performance motor with fan cooling
delivers maximum power and durability
• 5 steel-planet transmission and copper-plated switch provide job site durability
• DW995K-2 includes DW9116 charger, 2 DW9096 XR+™
PACK batteries, screwdriver bit, kit box.
Order No.
Mfg. No.
5029.00001 DW995K-2
Volts
18
RPM
0-450/0-1,450
Max. torque (in/lb)
355
24 Volt Drill/Driver Kit
18 Volt Hammerdrill,
Drill & Driver Kit
3960K-CC 1/2" Chuck
Adjustable Clutch,
Heavy-Duty 1/2" Chuck
•
•
•
•
Powerful motor delivers over 500" lb of torque
2-speed gear shift – 0-400/0-1,300 RPM
24 volt platinum batteries provide 30% longer run time
Kit includes: 2 batteries, 1-hour charger, side handle, 3
standard bits and case
Order No.
5026.00031
Mfg. No.
3960K-CC
Description
24 volt 1/2" drill/driver kit
• 3 tools-in-1: Hammerdrilling, drilling and
screwdriving
• High-performance motor with fan cooling
for maximum power and durability
• 5 steel-planet transmission and copper-plated switch provide job site durability
• Includes: DW9116 charger, 2 DW9096 XR+™ PACK batteries, screwdriver bit, kit box
Order No.
Mfg. No.
5029.00004 DW997K-2
Volts
18
RPM
0-650/0-1,850
BPM
0-7,150/0-20,350
699
ELECTRIC POWER TOOLS
14.4 V Drill/Driver Kit
24V SDS Rotary
Hammer Kit
Adjustable Clutch
Heavy-Duty 1/2" Chuck
• DEWALT-built high-performance motor with
fan cooling delivers maximum power and
durability
• 5 steel-planet transmission and copperplated switch provide job site durability
• Includes: DW9107 charger, 2 DW9091 XR PACK® batteries, screwdriver bit, kit box
Order No.
Mfg. No.
5029.00007 DW990K-2
Volts
14.4
RPM
0-450/0-1,450
Max. torque (in/lb)
336
Heavy-Duty 7/8" Chuck
• Variable speed, reversing
Factory-set clutch reduces sudden, high-torque reactions
if bit jams
• Electro-pneumatic hammer mechanism for fast penetration and low vibration
• 360° side handle
• Includes: DW0245 charger, DW0240 XR PACK® battery,
side handle, kit box
Order No.
Mfg. No.
5029.00022 DW004K
Volts
24
RPM
0-1,150
(BPM)
0-5,800
12V Drill/Driver Kit
Adjustable Clutch
Heavy-Duty 3/8" Chuck
50
• DEWALT-built high-performance motor with fan cooling
delivers maximum power and
durability
• 5 steel-planet transmission
and copper-plated switch
provide job site durability
• DW972K-2 includes DW9107 charger, 2 DW9071 XR
PACK® batteries, screwdriver bit, kit box
• DW972KQ-2 includes DW9117 quick charger, 2 DW9071
XR PACK® batteries, screwdriver bit, kit box
Order No.
Mfg. No.
Volts
5029.00010 DW972K-2 12
5029.00013 DW972KQ-2 12
RPM
0-450/0-1,450
0-450/0-1,450
• Compact and lightweight: 3.6 lbs.
• Multi-position adjustable clutch for
screwdriving accuracy
• Includes: DW9118 charger, 2
DW9062 compact batteries,
screwdriver bit, kit box
RPM
0-300/0-1,100
Max. torque (in/lb)
200
24V Drill, Hammerdrill Kit
Heavy-Duty 1/2" Chuck
• Drill and hammerdrill in one tool
• All metal chuck with carbide
tipped jaws prevents bit slippage
• 360˚ side handle
• Includes: DW0245 charger,
DW0240 XR PACK® battery, side
handle, kit box
700
Order No.
Mfg. No.
5029.00019 DW006K
Volts
24
RPM
0-450/0-2,000
• Easily converts 24V cordless
tools to corded, minimizing user
downtime
• Same power as a battery for
consistent performance
Order No.
5029.00025
Mfg. No.
DW0247
Volts
24
Cord Length (ft)
9
Work Site
Radio/Charger
Adjustable Clutch
Heavy-Duty 3/8" Chuck
Volts
9.6
Heavy-Duty 24V
Max. torque (in/lb)
310
310
9.6V Drill/Driver Kit
Order No.
Mfg. No.
5029.00016 DW926K-2
AC/DC Converter
• Powered by 9.6 – 18V DEWALT
NiCd batteries
• AM/FM radio with auxiliary port
• High impact roll cage
• Flexible antenna
• Weather resistant
• Battery sold separately
Charger
• Charges 9.6V – 18V DEWALT NiCd batteries
• 1-Hour DEWALT battery charger
• Patented 3-stage charging system
• Weather sealed charger door
• Does not accept DW9051, DW9050, DW9045, DW9046
batteries.
Order No.
5029.00027
BPM
0-7,650/0-34,000
Mfg. No.
DW911
Description
Radio/Charger for 9.6V-18V NiCd Battery
ELECTRIC POWER TOOLS
DW9098
DW9094
DW9072
DW9062
Compact Battery Packs:
DW9091
DW9071
DW9061
XR PACK® High Capacity Battery
Packs
• 20% smaller and 15% lighter than standard batteries
• Up to 1,200 recharges
• 25% More run-time than compact batteries
• Up to 1,200 recharges
XR PACK® Extended
Run-Time Battery Packs:
XR+™ High Capacity Battery
Packs
24 Volt Battery
18 Volt Battery
• High capacity XR PACK® batteries
• Durable side rail interface
• Powers DEWALT’s entire line of 24
Volt tools
• High capacity 2.4 Amp Hour battery –
40% more run-time than XR PACK®
batteries
• New Cobalt Technology = extended run-time.
• For use with all DEWALT 18V cordless tools
DW9096
50
DW0245
DW9116
DW9116-220
DW9117
DW9109
DW9118
DW9107
DW9106
DEWALT’s Battery and Charger Systems
BATTERY PACKS
Volts
Order No. Mfg. No.
(VDC)
5029.00030 DW0240
24
5029.00033 DW9096 XR+™ PACK 18
5029.00036 DW9095 XR2 PACK 18
5029.00039 DW9098 Compact
18
5029.00042 DW9091 XR PACK®
14.4
5029.00045 DW9094 Compact
14.4
5029.00048 DW9051 Univolt
13.2
5029.00051 DW9071 XR PACK®
12
5029.00054 DW9072 Compact
12
5029.00057 DW9050 Univolt
12
5029.00060 DW9061 XR PACK®
9.6
5029.00063 DW9062 Compact
9.6
5029.00066 DW9048 Univolt
9.6
5029.00069 DW9057 Compact
7.2
5029.00072 DW9046 Univolt
7.2
CHARGERS
DW9106 DW9188 DW9115 DW9107 DW9108 DW9180-220 DW9116 DW9116-220 DW9109
DW9117 DW911 DW0245
7.2V-14.4V 7.2V-14.4V 9.6V-14.4V 7.2V-14.4V 7.2V-18V 7.2V-18V (220)
Vehicle
7.2V-18V
Charger
15Min
X
X
X
X
X
X
X
X
X
X
X
7.2V-18V 7.2V-18V (220V)
7.2V-18V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
The 'X' indicates that the marked battery pack is compatible with that specific charger
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
24V
701
ELECTRIC POWER TOOLS
3/8" 14.4V Cordless Driver-Drill Kit
2-Speed, Variable Speed, Reversible
• 2 speed gear selection plus variable
speed in each range
• 12 stage torque setting for diverse
drilling and driving applications
• Keyless chuck for fast bit installation
• Electric brake; overload protector
• Powerful 14.4V (2 Ah) battery
• Externally accessible brushes
• 2-speed gear selection (0 - 400
RPM or 0 - 1,300 RPM)
• 18 torque settings in both high
and low speed
• Keyless chuck with patented
Hand-tite® feature for easy bit
installation
• Conveniently located forward /reverse switch
Order No.
5029.00075
Mfg. No.
6095D
Order No.
5029.00090
5029.00078
6095DW
5029.00081
6095DWE
3/8" 9.6V Cordless Driver-Drill
2-Speed, Variable Speed, Reversible
Includes:
Keyless chuck (192016-0)
Phillips bit (784202-3)
Keyless chuck (192016-0)
Phillips bit (784202-3)
Battery (632007-4)
Charger (CACDC9700)
Battery (632007-4) 2 ea.
Charger (CACDC9700)
Keyless chuck (192016-0)
Phillips bit (784202-3)
Plastic tool case (824393-9)
3/8" 9.6V Cordless Driver-Drill Kit
2-Speed, Variable Speed, Reversible
50
•
•
•
•
Powerful 9.6V (2Ah) battery
Compact and well balanced
Externally accessible brushes
2-speed gear selection (0 - 400
RPM or 0 - 1,200 RPM)
• 18 torque settings in both high and
low speed
• Keyless chuck with patented Handtite® feature for easy installation
• Conveniently located forward /reverse switch
Order No.
5029.00084
Mfg. No.
6203DWAE
Includes:
2 Ea. Battery 9122 (192596-6)
Phillips/slotted bit
Keyless chuck
Charger (DC1410)
Carrying case (824476-5)
Mfg. No.
6233DWAE
Includes:
2 Ea. Battery 1422 (192600-1)
Phillips/slotted bit
Keyless chuck
Charger (DC1410)
Carrying case (824476-5)
1/2" 12V Cordless Driver-Drill Kit
2-Speed, Variable Speed, Reversible
• Powerful 12V (2 AMP) battery
• Externally accessible brushes
• 2-speed gear selection (0 - 450
RPM or 0 - 1,400 RPM)
• 18 torque settings in both high
and low speed
• Keyless chuck with patented
Hand-tite® feature for easy bit
installation
• Conveniently located forward
/reverse switch
• 1/2" chuck for handling larger bits
Order No.
5029.00093
Mfg. No.
6313DWAE
Includes:
2 Ea. Battery 1222 (192598-2)
Phillips/slotted bit
Keyless chuck
Charger (DC1410)
Carrying case (824476-5)
1/2" 12V Cordless Hammer Drill Kit
2-Speed, Variable Speed, Reversible
• Powerful 12V (2 Ah) battery
• Externally accessible brushes
• 2-speed gear selection (0 - 450
RPM or 0 - 1,400 RPM)
• 18 torque settings in both high and
low speed
• Keyless chuck with patented Handtite® feature for easy bit installation
• Conveniently located forward /reverse switch
• Compact, sleek and rugged for professional use
• Up to 1,150 RPM and
12,700 BPM
• Electronic control and planetary gearing for constant
speed and maximum torque
• Variable 2-speed gear
selection with 10 torque
settings
• Keyless chuck and electric brake for operator
convenience
• Easily converts to a regular drill
Order No.
5029.00087
Order No.
5029.00096
3/8" 12V Cordless Driver-Drill Kit
2-Speed, Variable Speed, Reversible
702
Mfg. No.
6213DWAE
Includes:
2 Ea. Battery 1222 (192598-2)
Phillips/slotted bit
Keyless chuck
Charger (DC1410)
Carrying case (824476-5)
Mfg. No.
8412DWH
Includes:
Battery 1201 (192296-8)
Keyless chuck (192284-5)
Battery cover (414938-7)
Plastic tool case (824435-A)
Charger DC1201 (113126C303)
ELECTRIC POWER TOOLS
Cordless Power Tool Batteries
9.6V Battery 9000
• 9.6V rechargeable nickel cadmium battery
• For all 9.6V tools using removable battery except T-Style
BST 12 Plus
02 252
BST 15.6 Plus
02 276
SBT 15.6 Plus
02 293
BST 18 Plus
02 400
9.6V Battery 9002
• 9.6V rechargeable (2.0 Ah) super highcapacity nickel cadmium battery for all 9.6V
tools using removable battery except T-Style
9.6V Battery 9122
• 9.6V (2.0 Ah) super high capacity nickel cadmium battery for 9.6V T-Style cordless tools
12V Battery 1201
• 12V (1.7 Ah) high capacity nickel cadmium
battery for all 12V T-Style tools
12V Battery 1222
• 12V (2.0 Ah) super high capacity nickel cadmium battery for 12V T-Style cordless tools
1/2" Cordless Drills
14.4V Battery 1422
•
•
•
•
•
•
•
•
•
•
•
•
•
BST Plus & SBT Plus Series
• 14.4V (2.0 Ah) super high capacity nickel cadmium battery for 14.4V T-Style cordless tools
Order No.
5029.00100
5029.00103
5029.00106
5029.00109
5029.00112
5029.00115
Mfg. No.
632007-4
192533-0
192596-6
192296-8
192600-1
192598-2
Description
9000 9.6V battery
9002 9.6V battery
9122 9.6V battery
1201 12V battery
1222 9.6V battery
1422 14.4V battery
Cordless Tool Battery Chargers
Fast Charger
• For use with
removable battery
Order No.
5029.00118
Mfg. No.
CACDC9700
5029.00121
CACDC1290
CACDC9700
CACDC1290
Description
115VAC to 7.2/9.6VDC
For all 7.2V and 9.6V tools (DC9700)
115VAC to 9.6/12VDC
For all 9.6V and 12V tools (DC1290)
High Capacity
Quad-Voltage Charger
2-speed gearbox
3-stage metal planetary gearing
Electric brake
Reversing facility
Variospeed electronic speed control
On-tool storage for screwdriver bits
Spindle lock for single handed tightening of chuck
Impulse feature
20 + drill adjustable torque control
No-load speed 0-450/0-1600 RPM
1/2" x 20 UNF spindle thread
9-3/4" length (10" on BST 18 Plus)
Includes keyless chuck, 2 batteries, C 60 charger and
carrying case
Order No.
5029.00133
Mfg. No.
02 252
Length
(in)
9-3/4
5029.00136
02 276
9-3/4
5029.00139
02 293
9-3/4
5029.00142
02 40010
18V
50
Description
12V Drill/driver with C 60
charger and 2 batteries
15.6V Drill/driver with C 60
charger and 2 batteries
15.6V Hammer drill/driver with
C 60 charger and 2 batteries
Drill/driver with C 60
charger and 2 batteries
• For use with removable battery
Order No.
5029.00124
Mfg. No.
CACDC1410
Description
115VAC to 7.2/9.6/12/14.4VDC
For all 7.2V, 9.6V,12V and 14.4V
tools (DC1410)
Automotive Charger
• For use with removable battery
Order No.
5029.00127
5029.00130
Mfg. No.
CACDC9112
CAADC1412
Description
12VDC to 9.6VDC For all 9.6V tools
12VDC to 7.2VDC, 9.6VDC, 12VDC
and 14.4VDC. For all 7.2V, 9.6V, 12V
and 14.4V tools (DC1412)
Cordless Tool Accessories
C60
31 762
Order No.
5029.00145
5029.00148
5029.00151
5029.00154
5029.00157
5029.00160
5029.00163
Mfg. No.
31 762
31 391
31 772
31 746
31 729
31 749
31 759
Description
C60 Fast Charger for 7.2V to 18V batteries
For connecting to 12V/24V DC vehicle socket
ICS 10 Trickle Charger for 4.8V to18V batteries
Battery, 9,6V
Battery, 12V
Battery, 15.6V
Battery, 18V
703
ELECTRIC POWER TOOLS
14.4 Volt Cordless
Drill/Driver Kit
14.4V 1/2" Driver
Drill
Model 9876 3/8” Keyless Chuck
Model 9878 1/2” Keyless Chuck
Electric Brake, Keyless Chuck
•
•
•
•
•
•
•
• 20 position clutch including solid lock-up
• 2-speed gear box (0-475 and 0-1,450
RPM)
• Includes two high-capacity battery
packs, advanced diagnostic charger,
carrying case, double-ended bit tip,
and operating manual
Order No.
5029.00166
5029.00169
Mfg. No.
9876
9878
Power
14.4V
14.4V
Amp
2
2
Torque
360
360
Chuck
3/8
1/2
High performance motor
Spindle lock for manual rotation
Ultra high capacity 2.0 Ah battery
22-stage adjustable slip-clutch
No-load speed 0-350/1200 rpm
Electronic power control for higher torque at lower rpm's
Includes: 2 batteries EB14B, Phillips bit no. 2 955654,
charger UC14YF, plastic carrying case 315134
Order No.
5029.00184
Mfg. No.
DS14DV
Wood
Screw (DXL)
#16 x 2-1/2"
Machine
Screw (in)
1/4
Maximum
Torque
304 in-lb
12 Volt Cordless
Drill/Driver Kit
Model 9866 3/8” Keyless Chuck
• 12 volt, 2 amp/hr battery
• 3/8" keyless chuck with 330 in/lb/ maximum torque
• 20 position clutch including solid lock-up
• 2-speed (0-400 and 0-1,200 RPM)
• Includes two high-capacity battery packs,
advanced diagnostic charger, carrying case, doubleended bit tip, and operating manual
50
Model 9866F Drill/Driver Kit with Flashlight
• Same as 9866 includes
flashlight with high intensity
Xenon bulb
• Includes two high-capacity battery packs, flashlight, advanced
diagnostic charger, carrying
case, double-ended bit tip, and
operating manual
Order No.
5029.00172
5029.00175
5029.00178
Mfg. No.
9866
9866F
869F
Power
12V
12V
Flashlight
Amp
2
2
Torque
330
330
Chuck
3/8
3/8
• High performance motor with cooling fan
• Electronic feedback power control for higher torque at lower rpm's
• Spindle lock for manual screw driving
• 22-stage adjustable slip-clutch
• Ultra capacity 2.0 Ah battery for extended
operation
• No-load speed: 0-350/1200 rpm
• Includes: 2 batteries EB12B, Phillips bit no. 2 983006,
charger UC12YD, plastic carrying case 313853
Mfg. No.
DS13DV2
Wood
Screw (DXL)
#14 x 2"
Machine
Screw (in)
1/4
Maximum
Torque
200 in-lb
Speed (rpm) Torque
High
Low (in-lb)
0-1250 0-450 350
Length No
(in)
Load (bpm)
10.5
0-19000
18V Power-Plus
1/2" T-Handle
Driver/Drill (Kit)
Includes all-metal Grip-Lok™ keyless
chuck, 18 volt, two 2.4 amp/hr
Power-Plus battery packs, charger
and impact-resistant carrying case.
Order No.
5029.00190
Electric Brake, Keyless Chuck
Order No.
5029.00181
• T-handle design provides
optimum balance and comfort
• Soft grip handle pad reduces
pressure points and provides a
non-slip surface
• 20-position torque adjustment
• 0-19,000 bpm
• Includes: all-metal chuck, two 2.4 amp-hr battery backs,
charger and impact-resistant carrying case
Order No.
Mfg. No.
5029.00187 0514-24
12V 1/2" Driver Drill
704
14.4V Power-Plus
1/2" Hammer Drill (Kit)
Mfg. No.
0522-24
Speed (rpm)
High
Low
0-1500 0-450
Torque
(in-lb)
400
Length
(in)
10.25
Length
(in)
10.5
No
Load (bpm)
0-20,800
18V Power-Plus
1/2" T-Handle
Hammer-Drill (Kit)
Includes 1/2" all-metal Grip-Lok™
chuck, two 2.4 amp/hr battery
packs, charger and impactresistant carrying case.
Speed (rpm) Torque
Order No.
Mfg. No. High Low
(in-lb)
5029.00193 0524-24 0-1600 0-500 400
ELECTRIC POWER TOOLS
High Torque
Heavy-Duty
3/8" Drill/Driver
3/8" Drill Kit
1005VSRK
•
•
•
•
1032VSR
Variable speed reversing
Ergonomic contoured grip
No load RPM: 0-2,500
5.5 amp
Order No.
5026.00037
Mfg. No.
1005VSRK
• Heavy-duty chuck with ground
and hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
Description
3/8" VSR Drill and Case
High Torque
Heavy-Duty
3/8" Drill/Driver
Mfg. No.
11225VSR
Amps
6.5
RPM
0–1100
Order No.
5026.00054
Mfg. No.
1132VSR
No Load RPM
0-1,100
1013VSR
• 1/2" heavy-duty chuck with
ground and hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
• One-handed 3/8" keyless chuck
for the fastest bit changes
• Soft-grip trigger and handle
• Variable speed reversing
Mfg. No.
1012VSR
Amps
6.5
RPM
0-1100
Order No.
5026.00057
Mfg. No.
1013VSR
1030VSR
Amps
6.5
RPM
0-850
Amps
6.5
RPM
0-850
Amps
8.0
RPM
0-850
1014VSR
• 7.5 amp motor
• 0-2100 RPM for high speed
• Heavy-duty chuck with ground and
hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
• One-handed 1/2" keyless chuck
for the fastest bit changes
• Soft-grip trigger and handle
• Variable speed reversing
Order No.
5026.00060
Description
Heavy-duty 3/8" drill/driver
Mfg. No.
1014VSR
High Torque Heavy-Duty
3/8" Drill/Driver
High Speed
Heavy-Duty
1/2" Drill/Driver
1031VSR
1033VSR
• For high speed applications
• Heavy-duty chuck with ground and
hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
• For high speed applications
• Heavy-duty chuck with ground
and hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
Mfg. No.
1031VSR
50
High Speed
Heavy-Duty
1/2" Drill/Driver
High Speed Heavy-Duty
3/8" Drill/Driver
Order No.
5026.00049
Amps
3.8
High Speed
Heavy-Duty
1/2" Drill/Driver
1012VSR
Mfg. No.
1030VSR
RPM
0-1100
1132VSR
High Torque
Heavy-Duty
3/8" Drill/Driver
Order No.
5026.00046
Amps
7.5
• Low profile for hard to
reach areas
• Easy access paddle-type
switch
• Variable speed reversing
• Heavy-duty chuck with ground
and hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
Order No.
5026.00043
Mfg. No.
1032VSR
3/8" Right Angle Drill
1011VSR
Order No.
5026.00040
Order No.
5026.00051
Amps
7.5
RPM
0-2100
Order No.
5026.00063
Mfg. No.
1033VSR
705
ELECTRIC POWER TOOLS
Heavy Duty Self-Tapping
Fastener Driver
High Torque
Heavy-Duty
1/2" Drill/Driver
1422VSRQ
• Variable speed reversing
• Deluxe quiet clutch
• 1/4" hex drive
1034VSR
• Heavy-duty chuck with ground
and hardened jaws
• Soft-grip trigger and handle
• Variable speed reversing
Order No.
5026.00066
Order No.
5026.00084
Mfg. No.
1034VSR
Amps
8.0
RPM
0-550
Mfg. No.
1422VSRQ
Amps
4.8
No Load RPM
0-2,500
Super-Duty Self-Tapping
Fastener Driver
1423VSR
• Variable speed reversing
• Drives 5/16" Teks®-brand
type fasteners
• 1/4" hex drive
• Ergonomic contoured grip
High Speed
Heavy-Duty
1/2" Drill/Driver
1035VSR
Order No.
5026.00087
• For high speed applications
• One-handed 1/2" keyless chuck
for the fastest bit changes
• Soft-grip trigger and handle
• Variable speed reversing
Order No.
5026.00069
Amps
5.5
No Load RPM
0-2,000
1/2" Hammer Drill
Mfg. No.
1035VSR
Amps
8.0
RPM
0-850
50
Drywall Drivers
1404VSR, 1405VSR
• Variable speed reversing
• Ergonomic contoured grip
• Snap-off nosepiece; easy
screw removal
• Built-in belt clip
Order No.
5026.00072
5026.00075
Mfg. No.
1423VSR
1194AVSR
• Drill mode selector switch shifts
between rotation only or hammer
and rotation
• 8.0 amp
• 2 speed gear box matches
speed and torque to the job
• Includes 360º auxiliary handle
and depth gauge
1194AVSR
1194AVSRK 1/2" Hammer Drill Kit
Mfg. No.
1404VSR
1405VSR
Amps
4.8
4.8
RPM
0-4,000
0-2,500
Order No.
5026.00090
5026.00093
Mfg. No.
1194AVSR
1194AVSRK
No Load RPM
No Load BPM
0–1,000/0-2,600
16,000–41,600
1/2" Hammer Drill with Case
Rotary Hammer Drills
11234VSR, 11224VSR,
11228VSR
Heavy-Duty Deluxe
Drywall Drivers
• No load RPM: 0-1,100; no load
BPM: 0-5,000; 4.4 amp
• Two operational modes: rotation
only or hammer and rotation
• Includes 360˚ auxiliary handle,
depth gauge and case
• Reversing for fastening applications
1420VSR, 1421VSR
• Variable speed reversing
• Ergonomic contoured grip
• Snap-off nosepiece; easy
screw removal
• Quiet clutch eliminates
ratcheting noise; prolongs clutch life
706
Order No.
5026.00078
5026.00081
Mfg. No.
1420VSR
1421VSR
Amps
4.8
4.8
No Load RPM
0-4,000
0-2,500
Order No.
5026.00096
5026.00099
5026.00102
Mfg. No.
11234VSR
11224VSR
11228VSR
Description
3/4" rotary hammer drill, Pistol grip
7/8" rotary hammer drill, D handle
7/8" rotary hammer drill, Pistol grip
ELECTRIC POWER TOOLS
2" Rotary Hammer
11245EVS
1-1/8"
Rotary Hammer
• 2 modes of operation: hammer
and rotation, and hammer only
• Electronic feedback circuitry
maintains maximum performance
level at all times
11236VS
• 7.2 amp
• Padded, shock absorbing handles
Order No.
5026.00105
Mfg. No.
11236VS
No Load RPM
0–650
No Load BPM
0–3,900
• SDS-max™ drive system
• Vario-lock for 12-way chisel
positioning
• Front handle rotates 360° and
pivots front-to-back
• Electronic feedback circuitry
• Electronic feedback circuitry;
soft start, constant speed
• 7.8 amp
• Vario-lock rotates and locks
chisel into 36 positions
• Three operational modes:
hammer only, drill only, or drill
and hammer
Order No.
5026.00123
No Load RPM
300–700
No Load BPM
1,650–3,900
Mfg. No.
11313EVS
Amps
8.8
No Load BPM
1,300–2,600
Demolition Hammer
11316EVS
1-1/2"
Rotary Hammer
• Motor with hammer
mechanism – hits 10% harder
• Slide on/off switch and
push-to-strike design reduces
user fatigue
• Electronic feedback circuitry
maintains maximum performance levels at all times
11227E
• SDS-max™ drive system
• 8.8 amp
• Stop rotation selector; hammering
with or without rotation
• Electronic feedback circuitry;
constant impact and rotation
Order No.
5026.00111
Amps
14.0
11313EVS
11222EVS
Mfg. No.
11222EVS
Mfg. No.
11245EVS
Demolition Hammer
1-1/8" Rotary Hammer
Order No.
5026.00108
Order No.
5026.00120
Mfg. No.
11227E
Order No.
5026.00126
No Load RPM
360
Mfg. No.
11316EVS
50
Amps
14.0
No Load BPM
3,200
Demolition Hammer
1-1/2"
Rotary Hammer
11312E
• Electronic feedback circuitry
maintains maximum
performance levels
• Electro-pneumatic impact system
• Includes 360° auxiliary handle,
and plastic case
11230EVS
• SDS-max™ drive system
• 8.8 amp
• Stop rotation selector; hammering
with or without rotation
• Electronic feedback circuitry;
constant impact and rotation
Order No.
5026.00114
Mfg. No.
11230EVS
Order No.
5026.00129
No Load RPM
180–360
Mfg. No.
11312E
Amps
8.8
No Load BPM
2,600
Amps
8.8
No Load BPM
1,300–2,600
No Load BPM
1,600–3,200
Demolition Hammer
11314EVS
1-3/4"
Rotary Hammer
• 3/4" hex 21/32" round shank
• Electronic feedback circuitry
maintains maximum
performance levels
• Front handle rotates 360° and
pivots front-to-back
11235EVS
• SDS-max drive system
• 11.7 amp
• Electronic feedback circuitry
Order No.
5026.00117
Mfg. No.
11235EVS
No Load RPM
120-250
No Load BPM
1,000–2,400, 1,200–2,800
Order No.
5026.00132
Mfg. No.
11314EVS
707
ELECTRIC POWER TOOLS
3/8" Hammer Drill
Variable Speed, Reversible
3/8" Drill
Variable Speed, Reversible
• Variable speed;l 0-1,200 RPM
• 3.5 Amp motor
• Double reduction gear design
for extra torque
• Lock-on button switch for continuous operation
• Comes with a 3/8" industrial quality drill chuck
Order No.
5029.00200
Mfg. No.
6511LVR
Includes:
Drill chuck (763048-0A)
Chuck Key (763403-6A)
3/8" Drill
Variable Speed, Reversible
• Two tools in one; quick
disengagement from drilling
with or without hammering
• Variable speed for increased
drilling control
• 4.0 Amp motor delivers more
output power for increased performance
• Larger carbon brushes for 30% longer brush life and
reduced maintenance
• All ball bearing construction for long tool life
• Compact and lightweight (3.5 lbs)
• Adjustable depth guide and side handle mount on either
side of the tool
Order No.
5029.00217
Mfg. No.
NHP1030
• Variable speed drill to match
power to your material
• 3.5 Amp motor
• Double reduction gear design
for extra torque
• Lock-on button
• Comes with a 3/8" keyless chuck
Order No.
5029.00203
Mfg. No.
6511X
Includes:
Keyless Drill chuck (192282-9)
1/2" Drill
50
Variable Speed, Reversible
•
•
•
•
•
•
Heavy-duty 5.2 Amp motor
Heavy-duty drill chuck
Compact, lightweight (4.4 lbs)
Convenient belt clip
Side handle for greater control
Double insulated
Order No.
5029.00206
Mfg. No.
6303
Includes:
Drill chuck (763078-1)
Chuck key (763420-6)
Side handle (152491-2)
Includes:
Side handle (152491-2)
Chuck key (763415-9)
Drill chuck (763067-6)
Depth gauge (321220-6)
Stopper holder (164549-5)
Knob (251851-6)
Tool case (823046-7)
1/2" Hammer Drill
Variable Speed, Reversible
• High power-to-weight ratio
• 5.0 Amp motor
• “Rotation only” or “rotation
with hammering” with the
touch of a button
• Large trigger switch for easy operation
• Recessed lock-on button
• Idling mechanism prevents hammering while idling
• Reversing switch is conveniently located
• Keyless chuck for easy bit installation
Order No.
5029.00211
Mfg. No.
HP1501K
Includes:
Keyless chuck (763116-9)
Side handle assembly (152489-9)
Depth gauge (415486-9)
Plastic tool case (824474-9)
1/2" Drill
Reversible
3/4" Hammer Drill
• Rocker switch for easy one
handed reversing
• 6.3 Amp motor
• D-handle rotates 360° for
multi-position operation
• 550 rpm with double gear
reduction for added torque
• Ball and needle bearing
construction for long tool life and smooth operation
• Heavy-duty industrial 1/2" drill chuck for positive bit
retention and accurate drilling
• Handy chuck key retained in handle to prevent loss
2-Speed, Variable Speed,
Reversible
Order No.
5029.00209
708
Mfg. No.
6013BR
Includes:
Top handle (152492-0)
Drill chuck (763047-2A)
Chuck key (763411-7A)
• All ball and needle bearings
for long life
• 2-Speed gear change for
ideal speed and power
• Variable speed switch for easy starting of holes
• Depth setting rod for “drop-in” type anchors
• 6.0 Amp motor for continuous use
• Adjustable side handle for greater control
• Double insulated
Order No.
5029.00214
Mfg. No.
HP2010N
Includes:
Drill chuck (763047-2)
Chuck key (763411-7)
Tool case (182617-2)
Side handle assembly (122428-3)
ELECTRIC POWER TOOLS
VSR Drills
Heavy Duty Drill
Heavy-Duty 3/8" Chuck
Heavy-Duty 1/2" Chuck
• Helical-cut steel, heat-treated gears
for increased durability and long gear life
• Jacob® single-sleeve keyless chuck
with spindle lock provides greater
holding power
• DW226: Metal gear housing for increased durability
• Two-finger, rubber trigger for increased comfort
• AC/DC, forward/reverse rocker switch
• 5/8" spindle for increased durability in
high torque applications
• 2-position rear spade handle and
3-position side handle for greater control
• DW130 available in 220V
Order No.
5029.00220
5029.00223
Mfg. No. Amps RPM
DW226 7.0
0-1,200
DW222 6.7
0-1,500
Chuck
(in)
3/8
3/8
Spindle
Lock
yes
yes
Gear
Reduction
double
double
VSR Drills
Heavy-Duty 3/8" Chuck
• All ball-bearing construction provides
greater durability
• Contoured textured handle for better grip
• Built-in two-way level for drilling accurately vertical
and horizontal holes
• DW106/DW106K: Heavy-duty Jacob ® keyless
chuck provides greater bit retention
• DW106K includes kit box
• DW100 available in 220V; includes keyed chuck
Order No.
5029.00226
5029.00229
5029.00232
Mfg. No.
DW106
DW106K
DW100
Amps
5.4
5.4
5.4
RPM
0-2,500
0-2,500
0-2,500
Chuck (in)
3/8
3/8
3/8
Gear Reduction
single
single
single
VSR Drills
Heavy-Duty 1/2" Chuck
• Helical-cut steel, heat-treated gears
for increased durability and long
gear life
• Metal gear housing for increased
durability
• Two-finger, rubber trigger for
increased comfort
• 360˚ side handle for greater control
Order No.
5029.00235
Mfg. No.
DW235G
Chuck Spindle
Amps RPM (in)
Lock
7.8
0-850 1/2
n/a
Order No.
5029.00241
Mfg. No. Amps RPM
DW130 7.0
0-450
Chuck (in)
1/2
Heavy Duty 1/2" VSR Hammerdrill
• High power motor for greater
durability
• Dual mode: Hammerdrill/drill
for wood, steel or masonry
applications
• Lightweight design for less
user fatigue
• Two-finger, rubber trigger for increased comfort
• DW505K includes side handle, depth rod, kit box
Max
Order No. Mfg. No. Amps Watts Out RPM
5029.00244 DW505K 7.2
650
0-1,100/
0-2,700
Blows/Min. Chuck
(BPM)
(in)
0-19,000/ 1/2
0-46,000
Heavy Duty 1/2" Hammerdrill
• Dual mode: Hammerdrill/drill for
wood, steel or masonry applications
• Built-in clutch to prevent gear
damage in lock-up situation
• Rubber grip and two-finger, rubber trigger for increased comfort
• DW515K includes side handle,
depth rod, kit box
Max
Order No. Mfg. No. Amps Watts Out RPM
5029.00247 DW515K 8.2
750
0-1,050/
0-2,400
Gear
Reduction
double
Gear Reduction
triple
Blows/Min. Chuck
(BPM)
(in)
0-18,000/ 1/2
0-41,000
Heavy-Duty 1"
SDS Rotary
Hammer Kit
VSR Drills
with Chiseling Feature
Heavy-Duty 1/2" Chuck
• Hammer mechanism optimized for broad range of bit
sizes
• Gearbox engineered for long life by keeping grease in
and dust out
• D-handle grip configuration for optimal control overhead
• Includes: Side handle, depth rod, and kit box
• DW567 also available in 220V
• Helical-cut steel, heat-treated
gears for increased durability
and long gear life
• Metal gear housing for
increased durability
• Two-finger, rubber trigger for increased comfort
• 360˚ side handle for greater control
Order No.
5029.00238
Mfg. No.
DW246
Amps
7.8
Chuck Spindle
RPM (in)
Lock
0-600 1/2
yes
Gear
Reduction
triple
50
Max
Order No. Mfg. No. Amps Watts
5029.00250 DW567K 6.9
740
RPM
0-1,150/
0-5,800
Load speed Capacity
RPM
(in)
0-820
1/2" steel
1" concrete
709
ELECTRIC POWER TOOLS
1-1/8" SDS Rotary
Hammer Kit
3/8" Close Quarter Drill
• Accepts SDS bits from 5/32" to 1-1/8"
• Dual housing construction with rubber
mounts reduces vibration
• Multiple dust seals prevents dust from entering tool for
extended hammer mechanism life
• Variable speed allows for precise hole placement
Order No.
Mfg. No.
5029.00253 DW568K
Amps
8.3
Max
Watts Out
900
Capacity
RPM
(in)
0-730/ 1-1/8
0-4,100
0-1300 rpm
• Unique 55 degree angled chuck
• All ball and roller bearings; helical cut
heat-treated gears
• Lightweight with comfortable grip
• Efficient paddle switch
• Chuck key and rubber key holder
• 3.5 Amp motor
Gear
Spindle
Order No.
Mfg. No. Volts Train
Thread
5029.00274 0375-6 120 Double 3/8–24
Repl.
Chuck No.
48-66-3240
Length
(in)
10
SDS Max Drive Rotary Hammer Kit
Heavy-Duty 1-3/4"
• Large motor and higher
impact energy improve performance for chipping and large
(1-1/4"+) hole drilling applications
• Standard core bit: 4"
• Thin wall core bit: 6"
• Includes: Side handle, depth rod and kit box
Max
Impact Energy
Capacity
Order No. Mfg. No. Amps Watts Out ft/lb
RPM
(in)
5029.00256 DW545K 10.6 1,160
.7-6.2
105-275 1-3/4
50
Heavy-Duty VSR
Drywall Screwdriver
• Metal gear housing for increased durability
• Adjust nosepiece for consistent fastener depth
• Rubber-grip and two-finger, rubber trigger for
increased comfort
• Fasten drywall and wire lath to 20-25 gauge metal studs
and wood studs; fastens 20-25 gauge studs to track
• DW274 also available in 220V
• DW272W includes 50' twist lock plug
Order No.
5029.00259
5029.00262
Mfg. No.
DW274
DW272/
Amps RPM
Clutch
6.3
0-4,000 Quiet
6.3
0-4,000 Standard
Max. fastener size
#8
#8
Heavy-Duty VSR
Versa-Clutch®
Screwdriver
• Versa-Clutch® system “dials” the proper
torque to drive fasteners without stripping or
breaking; override capability
• Rubber-grip and two-finger, rubber trigger for
increased comfort
• Applications: All-steel framing using
#6-14 diameter self-drilling fasteners
• DW268 also available in 220V
710
Order No.
5029.00265
5029.00268
5029.00271
Mfg. No.
DW268
DW267
DW269
Amps
6.5
6.5
6.5
RPM
0-2,500
0-2,000
0-1,000
Max. fastener size
#14
#14
#14
3/8" Magnum ® Hole Shooter
Grip-Lok™ All-Metal Two-Sleeve Keyless Chuck
• Double insulated
• Powerful 5.5 amp motor
• Aluminum gear case and
diaphragm
• Removable brush cartridge system
• Powerful Milwaukee built motors
• Trigger speed control reversing switches
• High, strength, impact-resistant handles
• 3/8" two-sleeve with 3/8-24 thread
• 120V (AC only)
Order No.
5029.00277
Mfg. No. Volts
0233-21 120
Gear Replacement
Amps Train Chuck No.
5.5
Single 48-66-1530
Length
(in)
10
1/2" Magnum ® Hole
Shooters
•
•
•
•
•
•
•
•
•
•
•
•
•
0-850 rpm
Trigger speed control reversing
All ball and roller bearings
Helical cut, heat-treated gears for heavy-duty
industrial/ construction applications
Powerful 5.5 amp motor
Removable brush cartridge system
Aluminum gear case and diaphragm
Heavy-duty industrial chucks
High strength, impact-resistant handles
3-wire Quik-Lok® cord sets
Rubber flex key holder and side handle
1/2" two-sleeve with 1/2-10 thread
Double gear train
Order No.
Mfg. No. Volts
5029.00280 0234-6 5.5
Gear Replacement
Amps Train Chuck No.
0-850 48-66-1360
Length
(in)
10-1/2
ELECTRIC POWER TOOLS
SDS-Plus
15/16" Rotary Hammer
1/2" Hammer Drill Kit
Keyed Chuck
•
•
•
•
•
•
•
•
•
•
•
Trigger speed control
All ball and roller bearings
Removeable side handle
For percussion carbide-bit drilling in concrete
and masonry or drilling without hammering in
wood or metal
Reversing
Cushion grip handle
7.5 amps
13" in length
120 Volts (AC only)
RPM: Low 0-1,350; High 0-3,200
Blows per minute: low 0-22,000; High 0-52000
Order No.
5029.00283
Mfg. No.
5378-20
5029.00286
5378-2
RPM
Blows / min
Low 0-1,350
Low 0-22,000
High 0-3,200
High 0-52,000
With impact resistant use case
• Powerful 6.2 amp motor
• Industrial chuck designed for heavy-duty
use and maintenance-free
operation
• 3-position side handle and
removeable 2-position rear Dhandle for greater control and balance
• Auto-stop carbon brushes protect armature and extend tool life
• Includes: drill chuck 950275, chuck key
930515, side handle 981828
Mfg. No.
D13
No-Load
Speed (rpm)
550
• New more powerful 5.7 amp motor
• Modes: hammer/drill, hammer only, drill only
• Variable lock mechanism for easy adjustment of working
angle of chisels
• No-load speed: 0-1350 rpm
• Includes: depth gauge 303709, plastic carrying case
307786, side handle 303659
Order No.
5029.00294
Capacity
Steel (in)
1/2
Mfg. No.
DH24PC
•
•
•
•
•
bpm
0-4400
Mfg. No.
DH24PB
Amps
5.7
Impact
Energy
1.5 ft-lb
Core Bit (in)
2
bpm
0-4400
50
Spline Shank
Capacity
Wood (in)
1-5/8
Variable Speed
• Exclusive 2-speed
synchromesh transmission allows speed shift
without stopping operation
• Easy to select lever method for
easy selection of impact drilling or
drilling only modes
• Includes: side handle 316279, stopper 303709, plastic
carrying case 310904
Amps
6.8
Core
Bit (in)
2
1-9/16" Rotary
Hammer
3/4" Reversible Hammer Drill
Mfg. No.
DV20VBP3
Impact
Energy
1.5 ft-lb
5.7 amp motor
Lightweight: 5.1 lb
No-load speed: 0-1050 rpm
Modes:hammer/drill and drill only
Includes: depth gauge 303709, plastic carrying case
307786, side handle 303659
• One-touch lever action for quick change
over from ‘rotation + hammer’ to ‘hammer
only’
• Comfortable cushion-grip handles reduce vibration
• Auto-stop carbon brushes protect armature
• No-load speed: (DH40FA) 400 rpm, (DH40FB) 180-360
rpm
• Includes: plastic carrying case 313097, stopper 971786,
hex wrench 4 mm 944458, hex wrench 5 mm 944459,
grease 981840, dust cover 993245
Order No.
5029.00300
5029.00303
Order No.
5029.00291
Amps
5.7
Rotary Hammer
2 Mode
Order No.
5029.00297
1/2" Reversible Drill
Order No.
5029.00289
3 Modes
Reversible Variable Speed
Overall Length (in)
13-3/8
Mfg. No.
DH40FA
DH40FB
Amps
8.7
8.7
Impact
Energy
5.9 ft-lb
1.9-5.9 ft-lb
bpm
2800
1400-2800
Max Shank
• Sealed grease
system
• One-touch mode selection lever
• No-load speed: (DH40MA) 360 rpm,
(DH40MB) 180-360 rpm
• Includes: plastic carrying case 313097, stopper 971786, hex wrench 4 mm 944458, hex wrench 5 mm
944459, grease 981840, dust cover 993245
Order No.
5029.00306
5029.00309
Mfg. No.
DH40MA
DH40MB
Amps
8.7
8.7
Impact
Energy (ft-lb)
5.9
1.5-5.9
bpm
2800
1400-2800
711
ELECTRIC POWER TOOLS
Rotary Hammer Combination
KHE Series
SBE 750 Impact
Hammer Drills
•
•
•
•
•
•
•
•
•
Aluminum die-cast gear housing
2-speed gear-box
Variospeed electronic speed control
Reversing facility
Metabo safety clutch
1/4" hexagonal recess spindle with clamping bushing
Marathon motor with axial/radial fan
1/2" geared chuck
Standard equipment includes side handle, depth gauge,
chuck key and carrying case
Order No.
5029.00311
Mfg. No.
00 760
Capacity
(in)
3/4
No-Load
Speed (RPM)
0-1000/0-3000
Weight
(lb)
10
Length
(in)
13-1/2
50
Speed
(RPM)
0-2800
5029.00317 00 532
0-1100
5029.00320 00 703
0-900/
0-2200
Blow
Energy (j)
0-2.3
0-3.5
Capacity
(in)
1
1-1/4
Speed
(RPM)
0-1000
0-800
Weight
(lb)
5.9
7.7
Length
(in)
14-1/4
15
BE 560
00 557
5/8" Magnetic
Drilling Units
BE 700/2S
00 703
*Not available on BE 560
Order No.
Mfg. No.
5029.00314 00 557
Rotation stop
Reversing
Aluminum die-cast gear housing
KHE 32
VTC electronic variospeed control
00 232
Signal for wear of carbon brushes
Suitable for light chiselling work
Percussion stop for drilling only operations
Auto-stop carbon brushes
Winding protection grid
Constamatic electronic speed stabilizer
Marathon motor
Axial/radial fan
Keyless chuck quick-change system
Carrying case
Standard equipment includes side handle and depth gauge
Mfg.
Order No.
No.
5029.00326 00 237
5029.00329 00 232
BE Series Straight Drills
• Aluminum die-cast gear
housing*
• Variospeed control
• Reversing facility
• Geared chuck
• Metabo safety clutch*
• Auto-stop carbon brushes
• Winding protection grid
• Includes: chuck key and
carrying case
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wt. Length
(lb) (in)
Description
3.5 10
Capacity 3/8"; thumb-wheel
for preselecting speed
4.2 11-1/4 Capacity 1/2"; clamping
bushing and side handle
5.1 11-1/2 Capacity 1/2"; high torque;
clamping bushing and
side handle
When your production requires the
versatility of a magnetic unit and a
full-featured, powerful hand-held drill
you can’t beat this combination.
Mounting and removing the drill is
simple and fast.
• Speed under load: 0-430/760
• Reversing
Order No.
5029.00332
Mfg. No.
A-716
Motor
120V AC
Drill (in)
5/8
Hole Saw (in)
3
Rotary Hammer
BHE 24
•
•
•
•
•
•
•
•
•
•
•
•
•
•
712
Reversing facility
Metabo safety clutch
Signal for wear of carbon brushes
Suitable for light chiselling work
Percussion stop for drilling only operations
Aluminum die-cast gear housing
VTC electronic variospeed control
Auto-stop carbon brushes
Winding protection grid
Constamatic electronic speed stabilizer
Marathon motor
Axial/radial fan
Keyless chuck quick-change system
Includes side handle, depth gauge and carrying case
Mfg.
Order No.
No.
5029.00323 00 236
Blow
Energy (j)
0-2.3
Capacity Speed
(in)
(RPM)
1
0-1000
Weight
(lb)
5.3
1-1/4" Magnetic
Drilling Units
Weighing only 21 lb, this small but
powerful unit provides one-hand
portability and is ideal for working
in confined spaces. The single
speed is optimized for the range of
smaller diameter annular cutters
delivering fast drilling times and
long cutter life.
• Maximum drill point pressure:
300 lb
• Speed under load: 450
• Amps: 7.5
Length
(in)
12
Order No.
5029.00335
Mfg. No.
A-731
Motor
120V AC
Drill (in)
1/2
Annular Cutter (in)
1-1/4
ELECTRIC POWER TOOLS
1/2" Square Drive
Impact Wrench
1/2" Impact Wrench
• AC/DC forward/reverse rocker switch
• Delivers full power; 240 ft/lb of torque
in forward and reverse
• Ball-bearing construction
• DW290: detent pin
• DW290 also available in 220V
Impacts/Min. Torque
Order No. Mfg. No. Amps RPM (bpm)
(ft/lb)
5029.00338 DW290 7.5
2,100 2,700
240
Tool length
(in)
10-7/8
Order No.
5029.00350
3/4" Impact Wrench
• AC/DC forward/reverse rocker
switch
• Delivers full power; 300 ft/lb of
torque in forward and reverse
• Ball-bearing construction
Impacts/Min. Torque
Order No. Mfg. No. Amps RPM (bpm)
(ft/lb)
5029.00341 DW296 7.5
2,100 2,700
300
Tool length
(in)
10-7/8
Reversible
• 4.6 amp motor for superior
Shown
performance
with
• Lightweight (6 lbs) for less
optional
socket
operator fatigue
• Well balanced and easy handling in confined areas
• All ball bearing construction
• Precision machined gears for long life and usage
• Convenient rocker switch for easy reversing
• Externally accessible brushes for easy maintenance
• Double insulated
Mfg. No.
6905B
Mfg. No.
WH16
Amps
5
Impact
Rate (ipm)
2000
Description
1/2" Impact Wrench Tool Only
Order No.
5029.00353
Mfg. No.
WH22
Amps
10
Impact
Rate (ipm)
1800
50
• Runs on 120V AC/DC outlet or 2,500
watt portable alternator
• 15 amp
• 66.5 lbs.
Order No.
5026.00356
Mfg. No.
11304
Amps
15.0
1-3/16" Hex Shank
Description
3/4" Impact Wrench, tool case and
Side handle (122464-9)
Bolt
Cap (in)
9/16-15/16
11304
Demolition Hammer
• 9.0 amp motor for heavyduty applications
• Rocker type reversing
switch for easy one handed
forward-reverse operation
• Precision gearing and bearing construction for smooth
and efficient power transmission
• Adjustable (360°) side handle
• Externally accessible brushes for easy maintenance
• Double insulated
Max.
Torque
434
Breaker Hammer
Reversible
Mfg. No.
6906
Bolt
Cap (in)
15/32-5/8
• Side handle for better control
during high torque applications
• Anti-vibration and heat-proof motor
• Industrial pin and ring socket retainer
keeps sockets straight and tight
• Maintenance-free long-life hammer system
• No-load speed: 1600 rpm
• Includes: hex wrench 944458, hex socket 874523, metal
case 314174, side handle 985280
3/4" Sq. Drive
Impact Wrench
Order No.
5029.00347
Max.
Torque
217 ft-lb
3/4" Square Drive
Impact Wrench
1/2" Square Drive
Impact Wrench
Order No.
5029.00344
• Powerful 5 amp motor with 217
ft-lb of tightening torque
• Anti-vibration and heat-proof motor
• Industrial pin detent socket retainer keeps
sockets straight and tight
• Exclusive long-life hammer system provides extended maintenance free operation
• No-load speed: 1700 rpm
• Includes: hex wrench 944458
No Load BPM
1,340
• Powerful 11.4 amp
motor
• Automatic oiling system with unique ‘air-pressure oil control’ enables extended use without oiling
• Idle hammering prevention increases tool life and minimizes maintenance
• Includes: oil feeder 931848, bull point 16", hex wrench
872422, wrench 971109, side handle 956852, metal case
1479, Service kit 957153
Order No.
Mfg. No.
5029.00359 H65SC
Amps
11.4
Impact
(ft-lb)
20.7
bpm
1400
Shank Type (in)
1-3/16 hex,
7/8 round
713
ELECTRIC POWER TOOLS
Orbital Action
Jigsaw Kit
Jig Saw
Orbital, Variable Speed
• 3 orbital settings plus straight
cutting
• Adjustable cast aluminum base;
0-45° bevel right and left
• Speed dial for setting maximum speed
• Full 1" stroke length;accepts universal 1/4" shank blades
• Non-marring protective base insert
• Anti-splintering insert
Order No.
5029.00362
Mfg. No.
4304
Includes:
2 Ea. Blade (792538-6,A-02294, B-01323)
Hex wrench (783201-2)
Anti-splintering insert (415524-7)
Plastic base insert (415537-8)
Metal base insert (344136-8)
Plastic tool case (182807-7)
1581AVSK
• Variable speed control
• Includes case
• Top handle style
Order No.
5026.00371
Mfg. No.
1581AVSK
Amps
5.0
No Load RPM
500-3,100
Orbital Action
Jigsaw Kit
1584AVSK
• Variable speed control
• Includes assorted
accessories and
carrying case
• Barrel style grip with rotating handle
Jig Saw
Orbital, Variable Speed
50
• 3 orbital settings plus straight
cutting
• Adjustable cast aluminum
base;0-45° bevel right and left
• Speed dial for setting speed
• Full 1" stroke length;accepts universal 1/4" shank blades
• Non-marring protective base insert
• Anti-splintering insert
Order No.
5029.00365
Mfg. No.
4305
Includes:
2 Ea. Blade (792538-6,A-02294, B-01323)
Hex wrench (783201-2)
Anti-splintering insert (415524-7)
Plastic base insert (415537-8)
Metal base insert (344136-8)
Plastic tool case (182807-7)
Order No.
5026.00374
Mfg. No.
1584AVSK
Amps
5.0
No Load SPM
500-3,100
Amps
5.0
No Load SPM
500-3,100
Orbital Action Jigsaw
1587AVS
• Variable speed control
• Clic quick blade changes; no
tools needed
• Die cast aluminum footplate
• Top handle style
Order No.
5026.00377
Mfg. No.
1587AVS
Orbital Action Jigsaw Kit
1587AVSK
• Variable speed control
• Includes assorted accessories
and carrying case
STE 105 Plus Jig Saw
Variable Speed, Orbital Stroke
• Aluminum die-cast gear housing
• 5-stage orbital saw-blade movement for fast cutting
• Variable speed controlled by adjusting dial; electronic
speed stabilizer
• Grooved needle-bearing roller-guide
• Suitable for bevel cuts (15˚, 30˚ and 45˚)
• Clear front cap and rear outlet for vacuum collection
• Sawdust is blown from line of cut for better visibility
• Auto-stop carbon brushes
• Quick blade clamping system
• No-load speed of 1000-3000 SPM
• Includes: hexagonal wrench, jig saw blade, anti-splintering insert and carrying case
714
Order No.
5029.00368
Mfg. No.
10 500
Max. Material
Thickness (in)
4-1/8
Weight
(lb)
5.5
Length
(in)
10-1/4
Order No.
5026.00380
Mfg. No.
1587AVSK
Amps
5.0
No Load SPM
500-3,100
2-9/16" Orbital Jig Saw
Dial-in Variable Speed
• Powerful 5.2 amp motor with autostop carbon brushes
• 3-position orbital action selector
• Compact D handle design
• Plunger support mechanism
• Storage compartments in base for blades and wrench
• Includes: 3 blades, splinter guard 306363, hex bar
wrench 943277, chip cover 305772, plastic case 305781
Order No.
5029.00383
Mfg. No.
CJ65V2K
Amps
5.2
No Load SPM
700-3200
Stroke Length (in)
1
ELECTRIC POWER TOOLS
Heavy-Duty Top
Handle Jig Saw
3.2 Amp Jigsaw
• Tool free blade change that
accepts universal and t-shank
blades
• Unique counter-balance
mechanism and rubber grip provide smooth operation
• Adjustable shoe slides forward, backwards and bevels
45˚ in both directions without tools
• Includes: 3 Assorted cobalt steel blades and kit box
• Keyless Blade clamp
Adjustable dust blower
4 position orbital action
Order No.
Mfg. No.
5029.00386 DW321K
Amps
5.8
Strokes/
Min.
0-3,100
Stroke
length (in) Capacity(in)
1
4-1/3
Heavy-Duty Jig Saw
• Variable speed trigger allows
the user to match the blade
speed with the application
• DW318K includes kit box
• DW318 also available in 220V
• 4 position orbital action
Order No.
Mfg. No.
5029.00389 DW318K
Amps
4.5
Strokes/
Min.
0-3,100
Stroke
length (in) Capacity(in)
1
2-3/8
• Variable speed control
• Powerful 3.2 amp motor
• 3 Orbital settings allows for precise blade control
• Accepts either Universal shank
blades or Bosch type blades
• Each jigsaw is equipped with a built-in dust collection
hook-up and comes with a versatile wrench and blade.
• 0-3,000 strokes per minute
Order No.
Mfg. No.
5029.00407 FJ65
Stroke
Length (in)
3/4
Max. Cutting
Depth (in)
2-3/8
Weight
(lb)
3.4
4.8 Amp Jigsaw
• Heavy-duty version of the FJ65
variable speed control jigsaw
• 4.8 amp. motor is designed to handle the most difficult projects
• 4 orbital settings allow for precise
blade control
• Accepts either Universal shank
blades or Bosch type blades
• Each jigsaw is equipped with a built-in dust collection
hook-up and comes with a versatile wrench and blade.
• 0-3,000 strokes per minute
Order No.
Mfg. No.
5029.00410 FJ85
Stroke
Length (in)
1
Max. Cutting
Depth (in)
2-3/8
Weight
(lb)
5.4
50
7-1/4" Circular Saw Kits
™
Quik Change Jig Saw Kit
• Quik-Change™ blade clamp
lets – no tools required
• Unique guide system keeps
blade running straight and true
• Four-position selection lever
for choice of reciprocating blade
stroke or three degrees of orbit
• Tilting base can be adjusted
with built-in wrench – base
includes detents for accurate
9543
15°, 30°, and 45°
• Dust blower for clearing line of cut; may be turned off for
metal cutting with coolants
• Includes saw #543, blade #12701, non-marring base insert
for delicate surfaces #39195, anti-splinter base insert #39196,
heavy-duty carrying case #886778, and operating manual
Order No.
5029.00392
ACCESSORIES:
5029.00395
5029.00398
5029.00401
5029.00404
Mfg. No.
9543
Description
Volt
120V
39187
39195
39196
53530
Dust collection kit, 1" OD
Plastic sub base, non-marring
Base insert eliminates chipping
Edge guide
Amps
6
Strokes
500-3,100
• Dust nozzle directs dust and
chips away from operator
• Adjustable stops at 90°, 45° with
max stops at 93° and 48°
• Sturdy, light weight magnesium
base with edges 1-1/2" and 5"
from blade for edge guiding
• 100% ball and needle bearings
• Mitre lip on lower guard for no
hang-up cuts
• Spindle lock with wrench storage
in handle
• 5/8" arbor
• Includes: 18T carbide-tipped
Riptide® blade #12801, blade
wrench #48309, dust nozzle
#39333, heavy-duty carrying
case and operating manual
Order No.
5029.00413
5029.00416
Mfg. No.
743K
843K
Volt
AC/DC Amps RPM
120V 15
5,800
120V 15
5,800
5029.00419
5029.00422
347K
447K
120V
120V
15
15
5,800
5,800
743K
347K
Description
Blade left circular saw kit
Blade left saw kit with
electric blade
Blade right circular saw kit
Blade right saw kit
with electric blade
715
ELECTRIC POWER TOOLS
7-1/4" Circular Saw
• Heavy-duty motor
• Well balanced design
• Shaft lock for easy blade
replacement
• Heavy gauge aluminum wrap-around base ensures
stable support
• Ball and needle bearing construction
• Includes special “thin rim” carbide blade
Order No.
5029.00425
Mfg. No.
5007NB
5029.00428
5007NBA
Includes:
Carbide tipped blade (721249-6A)
Wrench (782016-4)
Rip fence (164095-8)
AC/DC
Carbide tipped blade (721249-6A)
Wrench (782016-4)
Rip fence (164095-8)
Electric brake
8-1/4" Circular Saw
50
• Heavy-duty 13 Amp motor for
continuous use
• Heavy gauge aluminum base
ensures stable support
• Well balanced with handle
design for better control from
above or behind the saw
• Shaft lock for easy blade replacement
• Ball and needle bearing construction for smooth running
and long tool life
• Double insulated
Order No.
5029.00431
Mfg. No.
5008NB
5029.00434
5008NBA
Includes:
Carbide tipped blade (721336-1A)
Wrench (782016-4)
Rip fence (164095-8)
Carbide tipped blade (721336-1A)
Wrench (782016-4)
Rip fence (164095-8)
Electric brake
•
•
•
•
•
•
•
Wide, clear sight line
Convenient bevel scale
One-touch spindle lock
Ball and roller bearings
15 amp motor, 3.25 max hp
120V AC-DC
Exclusive adjustable main handle; cushion front grip/rear
handle
• Includes carbide blade, blade wrench and impact-resistant carrying case
Order No.
5029.00437
Mfg. No.
6390-21
Arbor
(in)
5/8
1655
• 50° bevel and 45° detent
• Strong, light weight aluminum
footplate
• Remote lower guard lift lever
Order No.
5026.00200
Mfg. No.
1655
Amps
15
No Load RPM
5,500
Amps
15
No Load RPM
5,500
Amps
13
No Load RPM
5,500
Amps
13
No Load RPM
5,500
8-1/4" Circular Saw
1656
• 60° bevel; 45° detent
• Remote lower guard lift lever
• Extra-wide, light weight alloy
steel footplate
Order No.
5026.0203
Mfg. No.
1656
7-1/4" Circular Saw
1657
• 50° bevel and 45° detent
• No load RPM: 5,500; 13 amp
• Strong, light weight aluminum
footplate
• Remote lower guard lift lever
Order No.
5026.00206
Mfg. No.
1657
7-1/4" Circular Saw
1658
• AC/DC
• Spindle lock; fast blade
changes
• Includes carbide blade
Tilt-Lok™ 7-1/4"
Circular Saw (Kit)
716
7-1/4" Circular Saw
Cut Depth
@ 90˚ (in)
2-7/16
Cut Depth Cut Depth
@ 50˚ (in) @ 45˚ (in)
1-11/16
1-13/16
Order No.
5026.00209
Mfg. No.
1658
Finecut Power Handsaw
1640VS
• Precision cut-offs and
flush cuts
• Electronic variable
speed control
• Includes flush-cut and
general-purpose blades
Order No.
5026.00212
Mfg. No.
1640VS
Amps
3.5
No Load SPM
2,000-2,800
ELECTRIC POWER TOOLS
Heavy-Duty 7-1/4"
Circular Saw
Compound Mitre Saw
Heavy-Duty 12"
With Electric Break
• Rear pivot depth of cut adjustment allows your hand to
remain behind the tool at minimum depth of cut
• Powerful 15 Amp / 2,075 watts motor made for long life
and difficult applications
• Heavy-gauge, high-strength aluminum alloy shoe
• DW364K incl.20-tooth carbide blade, wrench and case
• DW364 includes 20-tooth carbide blade and wrench
Order No.
Mfg. No.
5029.00440 DW364K
5029.00443 DW364
Amps
15.0
15.0
RPM
5,800
5,800
Spindle
lock
yes
yes
Electric
break
yes
yes
Bevel
Capacity
50˚
50˚
• One piece arm design eliminates blade runout
• Bevels 0-45˚ to the left with
the ability to bevel to 48˚
• Fence slides out of the way to handle bevel cuts
• 0-48˚ mitre (left and right) for versatility cutting angles
• Extra-tall sliding fence accommodates 5-1/4" moldings
• Stainless-steel mitre scale with nine positive stops
• Lightweight (40.0 lb) with built-in carry handle
• Electric break
• Includes: 32-tooth SERIES 20™ carbide blade (DW3123)
and blade wrench
Order No.
5029.00493
Heavy-Duty 7-1/4"
Circular Saw
• Durable, low-friction aluminum
alloy shoe
• 100% ball and roller bearings
for durability
• Shoe provides a 1-1/2" edge distance that matches
dimensional lumber thickness
• DW362K incl. 20-tooth carbide blade, wrench and case
• DW362 includes 20-tooth carbide blade and wrench
Amps
15.0
15.0
RPM
5,800
5,800
Spindle
lock
yes
yes
Electric
break
yes
yes
Bevel
Capacity
50˚
50˚
• Powerful 13 amp motor for
varied material applications
• Equipped with spindle lock
for easy blade changes
• Durable nickel-plated base
for extended service life and
scratch-free work
• Optional dust collection adapter available
• 1680 max watts out
• No-load speed: 5500 rpm
• Includes: wrench 957683, wing bolt 302697, lock spring
947859, carbide tipped saw blade, 18 tooth 302410
Mfg. No.
C7SB
RPM
4,000
Blade (in)
12
Heavy-Duty 12"
Double-Bevel Sliding
• Electric break
• Crosscut capacity of 12" at
90˚ and an extra-high fence to
accommodate molding up to
5-1/4" standing vertically
• Fence slides out of the way to
handle bevel cuts
• Mitre 50˚ to the left and 60˚ to the right
• Bevels 45˚ left and right, with the ability to bevel to 48˚
• Stainless-steel mitre scale has 11 positive stops and a
cam-action mitre locking system
• Dual vertical rails use linear ball bearings and bronze
guides for superior accuracy and smooth sliding action
• Includes: 60-tooth SERIES 20™ carbide blade (DW3126)
for superior cuts
Order No.
5029.00496
7-1/4" Circular Saw
Order No.
5029.00451
Amps
15.0
Compound Mitre Saw
With Electric Break
Order No.
Mfg. No.
5029.00446 DW362K
5029.00449 DW362
Mfg. No.
DW705
Amps
13
Brake
No
Mfg. No.
DW708
Amps
13.0
RPM
4,000
50
Blade (in)
12
14" Multi-Cutter™ Saw
• 70 tooth blade provides virtually burr-free
cuts that help eliminate preparation grinding reducing the average cost-per-cut
• Maintains constant cutting depth
throughout the life of the blade
• 45˚ tool-free pivoting fence
allows for fast and accurate
angle cuts
• Ergonomically designed for increased visibility
• Positive Drive System™ arbor fitment
• Includes Quick Lock vise vertical clamping system
• Includes: 14" carbide blade, wrench and vertical clamp
Order No.
Mfg. No.
5029.00511 DW872
Amps
15.0
HP
5.3
RPM
1,300
Spindle
Lock
yes
717
ELECTRIC POWER TOOLS
10" Compound Mitre Saw
8-1/4" Compound Mitre Saw
• Large 11" diameter table
has positive ball detents at
0°, 15°, 22-1/2°, 30° and
45° right and left
• Bevel scale has stops at 0°
and 45° for quick setting of
common compound angles
• Articulating blade guard
• Built-in arbor lock for easy,
36-040C
single wrench blade changes
• Equipped with an electric
brake that automatically stops blade in seconds
• Motor powers through crosscuts up to 2-1/8" x 5-1/8"
thick
Order No.
5029.00463
Mfg. No.
36-040C
Description
9 amp, 115 V
RPM
5200
10" Power Mitre Saw
Power, Capacity, Portability
50
• Mitre indexing control with positive
stops at 0°, 22-1/2° and 45° right
and left
• Easy-to-read scale for in-between
angles is accurate to 1/2°
• Extra-wide one-piece fence for
maximum support of wide materials
• See-through blade guard
36-070C
• Electric blade brake automatically
stops blade
• Pre-drilled base holes for easy bench mounting
Order No.
5029.00466
Mfg. No.
36-070C
Description
13 amp, 115 V
RPM
5200
10" Compound Power
Mitre Saw
Order No.
5029.00469
Mfg. No.
36-075C
Order No.
5029.00472
Description
13 amp, 115 V
RPM
5200
Mfg. No.
36-220C
36-220C
Description
15 amp, 115 V
RPM
4900
Sidekick® 10" Sliding
Compound Mitre Saw
• Cuts 1-1/2" at 90° and 2" at
45° bevel
• Built-in arbor lock for easy
blade changes
• Electric brake automatically
stops blade in seconds
• Stand features built-in left
and right table extensions
that total 59° in length, stock
stops and wrench storage
Order No.
5029.00475
Mfg. No.
36-250C
36-250C
Description
15 amp, 120 V
RPM
5000
10" Mitre Saw
Sliding Dual Compound
– Twin Rail
• Soft start reduces noise and
recoil during start-up
• 7 positive stops on bevel
gauge left and right
• Electronic speed control
maintains rpm while cutting
• Linear ball bearing slide system for accuracy
• Includes: vise assembly 315276, slide fence 310881, dust
bag 998845, wrench 940543, carbide tipped saw blade
40 tooth 310878
Order No.
5029.00499
• Electric blade brake automatically
stops blade
• Lubricated-for-life ball bearings
assure trouble-free performance
• Easy-to-read bevel scale with
adjustable positive stops for
quick tilt settings
• Convenient mitre indexing
mechanism for quick, easy
36-075C
mitre settings
• Large one-piece fence for maximum support of
extra-wide materials
718
• Double insulated construction
• Lock-out button to prevent
accidental starts
• Electric brake automatically
stops blade in seconds
• Built-in arbor lock for easy
single wrench blade changes
• Replaceable cut-through
table insert
Mfg. No. Blade Dia. (in) No Load Speed (rpm) Amps
C10FS 10
3800
12
ELECTRIC POWER TOOLS
10" Slide Compound
Mitre Saw
14" Abrasive Cut-Off Saw
• 10 mitre detent positions
• 25" aluminum base with extra
tall fence
• Includes quick action clamp,
60 tooth carbide blade, dust
bag
Order No.
5026.00215
Mfg. No.
3915
Amps
13
No Load RPM
4,700
Handles your toughest metal-cutting jobs.
• Fold-down cutting head with locking
chain and carrying handle
• Switch can be padlocked
• Extra-long 12-foot cord
• Heavy-duty helical gear drive plus
ball and needle bearing
• Heavy-duty steel base with foot
20-140C
pads to reduce vibration
• Arbor lock for single wrench abrasive wheel changes
Order No.
5029.00478
12" Compound
Mitre Saw
Mfg. No.
20-140C
Description
15 amp, AC/DC, 115 V
RPM
3900
3912
• 9 mitre detent positions
• Includes quick action clamp,
40 tooth carbide blade, dust
bag
Order No.
5026.00218
Mfg. No.
3912
Heavy-Duty 14" Chop Saw
Amps
15
No Load RPM
4,300
10" Mitre Saw
With Electric Brake
• Safety cover opens/closes
automatically as handle is
raised and lowered
• Electric brake stops blade
after switch is released
• Positive stops at 0°, 15°, 22.5°, 30°, 45°
• Dustbag provides clean cutting
• Fence plate deflects chips from blade case
• Shaft lock for easier blade changes
Order No.
5029.00487
Mfg. No.
LS1020
• 45˚ tool-free pivoting fence allows for fast
and accurate angle cuts
• Ergonomically designed horizontal handle
for greater comfort
• Extra wide steel base for increased
stability, for pre-drilled holes
that allow for easy bolt down to
work bench
• Includes Quick Lock vise
• Adjustable spark guard
• On-board wheel change wrench
• Includes: 14" Abrasive wheel and wrench
Order No.
Mfg. No.
5029.00514 DW872
Amps
15.0
HP
5.3
RPM
3,800
50
Spindle
Lock
yes
Includes:
Socket wrench (782212-4); Combination
saw blade (792317-2); dustbag (122351-2)
10" Slide Compound Saw
With Electric Brake
•
•
•
•
•
Shaft lock for easy blade changes
Lightweight only 34.8lbs.
Large switch lever
Mitres up to 45° left and 57° right
Turn base stops at 13 settings; 15°,
22.5°, 30°, 31.6°, 35.3°, 45° right or
left and 0°
• Ultra smooth moving; two precision linear ball bearings
• Narrow opening of guide fence for better cutting
• Eccentric rod system attaches to the sturdy steel pole
beneath the turn base solidly stabilizing the motor head
for the straightest cut
Order No.
5029.00490
Mfg. No.
LS1011
Includes:
Socket wrench (782212-4); Cross cut blade
(792317-2); Dustbag (122351-2);
Vise (122468-1); Triangle (762001-3)
14" Cut-off Saw
• 15 amp. ball bearing induction motor
• Spark deflector for safe operation
• Steel base with foot pads minimizes
vibration for sturdy operation
• Quick release vise allows cuts up to a 45° angle
• Sturdy metal guard with retractable lower guard
• Large molded handle with lock-on button
• Cutting capacity at 90°:
Round diameter: 5-1/4"
Square diameter: 4-1/4 x 4-1/4"
Rectangular:
2-3/4 x 7-1/16"
Order No.
Mfg. No.
5029.00454 8340
Voltage
110V, 1 phase, 60 Hz
Arbor
Dia. (in)
1
Speed
(rpm)
3,900
719
ELECTRIC POWER TOOLS
Abrasive Cut-off Machines
12" Portable Cut-Off Saw
1364, 1365
•
•
•
•
High power-to-weight ratio
No load RPM: 5,000; 15.0 amp
Two-position wraparound side handle
Large footplate improves stability
Order No.
5026.00221
5026.00224
Mfg. No.
1364
1365
Description
12" abrasive cutoff machine
14" abrasive cutoff machine
• 13.0 Amp motor
• AC/DC switch
• Easy chopping action in pipe, tubing,
conduit, angle iron and channels
• Sparkguard catches wheel sparks for
safer operation
• Fold-down design with chain hook-up
for compact portability
• Vise swivels up to 45°
Order No.
5029.00502
Mfg. No.
2412N
14" Stationary
Abrasive Cut-off Machines
Includes:
Abrasive wheel (A-01345)
Socket wrench (782210-8)
Quick release vise (134548-1)
Adapter ring (257060-5)
3814
• Powerful 4 HP motor
• 100% ball and roller bearings
Order No.
5026.00227
14" Portable Cut-Off Saw
Mfg. No.
3814
Amps
15
No Load RPM
3,900
Cut-off Saw
50
14" Cut-Off Machine
With Quick Release - AC/DC
• Powerful 15 amp motor for greater
cutting efficiency
• Lightweight (37 lb) and portable for
any work site
• Quick release vise for fast and easy material change
• Durable steel base for extra cutting stability
• No-load speed: 3700 rpm
• Includes: wrench 951211, 14" cut-off wheel 725207
Order No.
5029.00460
Mfg. No.
CC14QV
Amps
15
Arbor (in)
1
Max. Depth
of Cut (in)
4-1/2
Heavy Duty Cut-off Saws
• Wheel diameter:
16" (222104) and 20" (222106)
• Pipe capacity:
4-3/4" (222104) and 8"
(222106)
• Motor pulley arbor: 1-1/8" I.D.
• Vise height:
2-3/4" (222104) and 4" (222106)
720
Order No.
Mfg. No. RPM Base (in)
Cap. (in) Rec. Motor
5029.00481 222104 2,735 13-5/8 x 24-3/4 6 dia.
5 Hp
5029.00484 333106 2,175 18-3/8 x 31-1/4 6-1/2 dia. 7-1/2 Hp*
*10 Hp maximum without changing motor mount.
• 15.0 Amp motor
• AC/DC switch
• Easy chopping action in pipe, tubing,
conduit, angle iron and channels
• Sparkguard catches wheel sparks for
safer operation
• Fold-down design with chain hook-up
for compact portability
• Vise swivels up to 45°
Order No.
5029.00505
Mfg. No.
2414
Includes:
Abrasive wheel (A-01351)
Socket wrench (782210-8)
Quick release vise (134548-1)
Adapter ring (257060-5)
14" Abrasive Cut-off Machine
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rugged construction
Arm locks down for easy portability
Quick release locking vise
1" arbor
Pivoting wheel guard
Easily accessible brushes
Heavy-duty cast iron base
5" pipe cutting capacity
All ball bearing construction for
longer life
Spindle lock for convenient changing of abrasive wheels
Wheel rotation directs particles away from the operator
Heavy-duty pivot arm spring for smooth, accurate cutting
Use with abrasive cut-off wheels (14" x 3/32" x 1")
For cutting drywall track, angle iron, conduit, pipe, channels, tubing, rebar and more
Order No.
5029.00508
Mfg. No.
6176-6
Amps
15
RPM
3900
Volts
(AC-DC)
120
Opening
(in)
9
ELECTRIC POWER TOOLS
Sawzall® Kit
18V Power-Plus Sawzall® Combo Kit
• Includes Quik-Lok blade clamp and impact-resistant carrying case
• No starting hole need for plunge cuts into floor or walls
• Ideal for plumbers, heating and air conditioning contractors, electricians, builders, steel fabricators, maintenance
workers and remodelers
• Cuts wood, nail-embedded wood, steel, cast iron, aluminum, brass, drywall, composition materials, hard rubber, cement, brick, plaster, fibreglass
• Adjustable pivot shoe; easy access to blade clamp screw,
direct access to pivot shoe adjusting screws
• Cord positioned for easier plunge cutting
• All ball and roller bearings
• 6.5 amps
™
Order No.
5029.00517
Mfg. No.
6509-21
Amps
6.5
Length of
Stroke (in)
3/4
With 1/2" Hammer Drill
in a Heavy-Duty
Contractor Bag
Standard Equipment:
6515-20 Sawzall®, 0524-20
Hammer drill, Power-Plus
universal one-hour charger,
two 18 volt 2.4 amp PowerPlus batteries, 2-blade pack
and 45-55-3500 heavy-duty contractor bag.
Order No.
5029.00527
Mfg. No.
6515-28
Description
18V Power-Plus Sawzall® Combo Kit
Strokes/
Minute
0-2600
Heavy-Duty 11 Amp Orbital Super
Sawzall® Kit
Heavy-Duty
Reciprocating Saw Kit
• Includes steel QuikLok™ blade clamp, 2blade pack, 10" 2-wire
Quik-Lok™ cord and steel carrying case
• Orbital action gear protection system
• Counter balance mechanism
• Trigger speed control; dial speed selector switch
• All ball and roller bearings
• Pivot shoe for maximum support against work surface;
shoe release lever; rubber boot
• Heavy-duty tool steel wobble plate mechanism
• Reversible blade mounting
•
•
•
•
Order No.
5029.00521
Mfg. No.
6521-21
Blade Stroke (in)
1-1/4
Amps
11
Super Sawzall® Kit
• Includes steel Quik-Lok™
blade clamp, 2-blade pack,
8" 3-wire Quik-Lok™ cord and
steel carrying case
• All ball and roller bearings
• Anti-vibration system exclusive to Super Sawzalls®
• Counter balance mechanism; gear protection system
• Powerful Milwaukee built 10 amp motor
• Trigger speed control; dial speed selector switch
• Adjustable shoe release lever; pivot shoe for maximum
support against work surface
• Heavy-duty tool steel wobble plate mechanism
• Rubber boot for superior gripping and operator comfort
• Blade clamp return spring
Order No.
5029.00524
Mfg. No.
6537-22
Amps
10
Strokes/
Minute
0-3200
Length of
Stroke (in)
1-1/4
Lever-action keyless blade clamp
Counter balance minimizes vibration
Push-button adjustable shoe
Variable speed dial and trigger allows cutting through all
materials
• Includes: Metal and wood cutting blades, and kit box
• DW309 also available in 220V
Order No.
Mfg. No.
5029.00530 DW309K
Amps
10.0
Strokes/min
0-2,900
50
Stroke
Keyless
length (in) clamp
1-1/4
yes
Heavy-Duty
Reciprocating Saw Kit
• DW308 has short stroke length for cutting 4" pipe
with a 6" blade
• Lever-action Keyless blade clamp
• Push-button adjustable shoe
• 2 speeds with variable speed trigger
• Includes: metal and wood cutting blades, and kit box
Order No.
Mfg. No.
5029.00534 DW308K
5029.00537 DW307K
Amps
9.0
9.0
Stroke
Strokes/min
length (in)
0-2,000/0-2,800 3/4
0-2,000/0-2,800 1-1/4
Keyless
clamp
yes
yes
Heavy-Duty
Reciprocating Saw Kit
• Variable speed
• Compact and lightweight
• Includes: Assorted blades, wrench holder, allen wrench,
and kit box
Order No.
5029.00540
Mfg. No.
DW303K
Amps
6.5
Strokes/min
0-2,400
Stroke length (in)
1-1/8
721
ELECTRIC POWER TOOLS
9737 Quik-Change™ Tiger Saw® Kit
Reciprocating Saw
Variable-Speed Dual Action
Electronic Variable Speed
• 10.0 amp, AC only
• New Quik-Change blade clamp for
keyless blade changes in
seconds
• Electronic variable speed
switch 0-2,600 SPM
• 1-1/8" stroke
• Switch for orbit (wood) and recip (metal)
• Pivoting front shoe
• Standard equipment: variable speed Tiger Saw® #737, 6T
bi-metal blade #12455, steel carrying case #53657, and
operating manual
• Powerful 11 amp motor with patented ‘swing’ blade
action tackles any application
• Keyless, one-hand blade clamp for quick blade changes
and blade reversal
• 1-3/4" keyless adjustable pivot shoe
• Unique ‘swing’ action cuts twice as fast as conventional
orbital action
• Oversized variable speed trigger and dial in max speed
selector
• Includes: 3 assorted blades, plastic carrying case 312831
Order No.
Mfg. No.
5029.00576 CR13VA
Amps
11
Speed (rpm)
0-2800
Stroke Length (in)
1-1/4
9735 Variable-Speed Tiger Saw® Kit
•
•
•
•
•
•
•
10.0 amp, AC only
Variable speed switch 0-2600 SPM
Efficient reciprocating cutting action
100% ball bearings
Pivoting from shoe
1-1/8" stroke
Universal blade clamp with efficient 7° rake angle
• Standard equipment: variable speed Tiger Saw® #738, 6T
blade #12400, Allen wrench #48248, heavy-duty plastic
carrying case #53670, and operating manual
50
Order No.
Mfg. No.
5029.00543 9737
5029.00546 9735
ACCESSORIES:
5029.00549 737
5029.00552 738
5029.00555 12400-5
5029.00558 12455-5
5029.00561 12490-5
5029.00564 48248
5029.00567 53657
5029.00570 53670
Volt
120V
120V
Amps
11.5
10
Strokes (SPM)
0-2600
0-2600
Quick change Tiger Saw, variable speed
Tiger Saw, variable speed
HCS blade for wood, 6 TPI, 5/pkg
Bi-metal blade for wood, 6 TPI, 5/pkg
Bi-metal blade for metal, 18 TPI, 5/pkg
Allen wrench for #738
Steel carrying case for #9737
Heavy duty plastic carrying case for #9738
Variable Speed
• 2 variable speeds for precise
cutting in a wide variety of materials
• Powerful motor for continuous operation
• Long 1-3/16" stroke for faster cutting
• All ball and needle bearings for longer life
• Accepts standard 1/2" shank blades
• Adjustable slide-out shoe for longer blade life
• Blade can be inverted for near flush cutting
• Lightweight for operator comfort
•Double insulated
722
Mfg. No.
JR3000V
1634VSK
• Clic™ quick blade
changes; no
hardware needed
• Clic™ adjustable
shoe; fast, easy
adjustments
• Linear counter balance for smooth cutting
• Orbital cutting action; fast, powerful cuts
Order No.
5026.00230
Mfg. No.
1634VSK
Amps
10.5
No Load SPM
0-1,900/0-2,700
Deep Cut Portable Electric Band Saws
Recipro Saw
Order No.
5029.00573
Reciprocating Saw Kit
Includes:
Blade (1 wood, 2 metal)
Hex wrench (783202-0)
Plastic tool case (824412-1)
• Includes steel carrying case
• Powerful motor with long life
brushes and high output fans
• Optimum speed range
• All ball and roller bearing construction
• High torque worm gear and
chain drive mechanism
• Excellent balance
• Open line of sight
• Blade tightening lever
• Uses standard 44-7/8" x 1/2" x .020" band saw blades
• 120V (AC only)
Order No.
5029.00579
Mfg. No.
6232-6
No Load
(sfpm)
0–350
Capacity
(in)
4-3/4 x 4-3/4
Amps
6.0
ELECTRIC POWER TOOLS
Variable Speed
Belt Sanders
1/2 Sheet
Finishing Sander
1275DVS, 1276DVS
• For production sanding
• No load SFPM:
1,150-1,550; 10.5 amp
• Lightweight magnesium
housing
1293D
• Fast, uniform finishing
• Through-the-pad
dust extraction
Order No.
5026.00233
Mfg. No.
1293D
Amps
3.2
OPM
11,000
5" Random Orbit
Sander/Polisher
3725DVS
Mfg. No.
3725DVS
Mfg. No.
1275DVS
1276DVS
Description
3" x 24" belt sander
4" x 24" belt sander
3" x 21" Belt
Sander
• Electronic feedback circuitry
• Pad dampening system
protects surfaces
Order No.
5026.00235
Order No.
5026.00244
5026.00247
1274DVS
Amps
3.3
No Load OPM
4,500-12,000
6" Random Orbit
Sander/Polisher
• Electronic variable
speed
• Detachable front handle
Order No.
5026.00250
Mfg. No.
1274DVS
Amps
6.6
No Load SFPM
550-1,100
3727DVS
• Electronic feedback circuitry
• Pad dampening system
protects surfaces
Order No.
5026.00238
Mfg. No.
3727DVS
3-1/4" Planer
3365
Amps
3.3
No Load OPM
4,500-12,000
5" Random
Orbit Sander
Order No.
5026.00253
3107DVS
• Pad dampening system;
consistent finishing
• Uses hook-and-loop
accessories
Order No.
5026.00241
• No load speed 18,000
RPM; 5.0 amp motor
• Convenient chip eject
directs shavings left or right
Mfg. No.
3107DVS
50
Mfg. No.
3365
Amps
5.0
Line-Mate II ™ Drum Sander
Amps
3.3
No Load OPM
4,500-13,000
Delivers all the power,
smoothness and endurance
required for all industrial
finishing applications.
• 7" disc diametre
• 5/8"-11 spindle thread
Order No.
5029.00585
SXE 450 Duo Sander
Mfg. No.
6268 LINE-MATE II
RPM
1,200-3,700
Dual Random Orbit Sander
Line Finishing Kit
• Aluminum die-cast orbit
plate
• Integral dust collection
• Auto-stop brushes
• Double insulated
• Variospeed electronic speed control
• Standard equipment includes assorted sanding paper,
front handle, paper dust bag, medium hard hook and loop
backing pad, hexagonal wrench and carrying case
Includes 1 Line-Mate II with
standard equipment plus 1
carrying case, 1 pneumatic drum,
6 cloth drum belts (2 each grit 60,
80, 120), 2 Blendex drum belts
(coarse, medium), 1 two-in-one
drum (4-1/4" x 4") and 1 Blendex
drum (4-1/4" x 4" medium).
• 7" disc diametre
• 5/8"-11 spindle thread
Order No.
5029.00582
Mfg. No.
00 458
Size
(in)
6 round
No Load RPM
18,000
Orbits Per
Minute
4000-10000
Weight
(lb)
5.5
Length
(in)
10-1/4
Order No.
5029.00588
Mfg. No.
6268 KIT
RPM
1,200-3,700
Motor
120V AC only
Motor
120V AC only
Amps
10
Amps
10
723
ELECTRIC POWER TOOLS
Speed-Bloc™ Quarter-Sheet
Finishing Sander
Profile Sander Kit
• Allows for sanding of corners, details and profiles
• Pad sands at 6,000
strokes-per-minute
• Includes dust wand for use with vacuum
• Standard pad accepts holed hook and loop paper
• Thumb-controlled on-off switch
9444
Model 9444
• Standard equipment: standard hook and loop sanding pad
#14444, single profile mounting plate #14445, offset profile
mounting plate #14446, complete set of 17 different sanding
profiles, one sheet of each of 80, 120, 220, grit hook and
loop paper, assorted profile sanding sheets, s#1449 dust
wand, #44444 carrying case, and operating manual
• Motor amps: 1.2
• Comfortable, easy-grip outer housing
• Solid metal frame for precision seating
and alignment of bearings, motor, and fan
• Rubber posts isolate hands from vibration
• 100% ball bearings
• 14,000 orbits-per-minute pad speed, with
aggressive 5/64" orbit
• Accepts both adhesive-backed and standard sandpaper
• Standard equipment: 120 grit abrasive sheet, clamp tool
#846372, and operating manual
Order No.
5029.00678
Mfg. No.
330
Power
120V
Speed (OPM)
14,000
Pad Size (in)
4-1/8 x 4-1/2
Model 9444VS
• Standard equipment: standard hook and loop sanding pad
#14444, single profile mounting plate #14445, offset profile
mounting plate #14446, complete set of 17 different sanding
profiles one sheet of each of 80, 120, 220, grit hook and
loop paper, assorted profile sanding sheets, #14449 dust
wand, #44444 carrying case, and operating manual
50
Order No.
5029.00600
5029.00603
PROFILES:
5029.00606
5029.00609
5029.00612
5029.00615
5029.00618
5029.00621
5029.00624
5029.00627
5029.00630
5029.00633
5029.00636
5029.00639
5029.00642
5029.00645
5029.00648
5029.00651
5029.00654
5029.00657
5029.00660
5029.00663
5029.00666
5029.00669
5029.00672
Mfg. No.
9444
9444VS
Power
120V
120V
Amps
1.8
1.8
Speed (SPM)
6000
2100 - 6000
14451
14460
14470
14452
14461
14471
14453
14462
14472
14454
14463
14473
14454
14464
14474
14456
14465
14470
14471
14472
14473
14473
14474
1/8" radius convex pad
1/8" radius concave pad
0 degree angle pad
3/16" radius convex pad
3/16" radius concave pad
30 degree angle pad
1/4" radius convex pad
1/4" radius concave pad
45 degree angle pad
3/8" radius convex pad
3/8" radius concave pad
60 degree angle pad
3/8" radius convex pad
1/2" radius concave pad
90 degree angle pad
5/8" radius convex pad
5/8" radius concave pad
0 degree angle pad
30 degree angle pad
45 degree angle pad
60 degree angle pad
60 degree angle pad
90 degree angle pad
724
Mfg. No.
505
Power
120V
Speed (OPM)
10,000
Comfortable, palm-grip design
Powerful 2.0 amp motor
100% ball bearings
Unique dust collection canister – sander may be attached
to vacuum
• 14,000 orbits-per-minute; 1/16" orbit
• Standard pad accepts stick-on or regular abrasives – contour
and hook and loop pads available
• Standard equipment: 120G abrasive sheet, paper punch
#878533, carrying case, and operating manual
Mfg. No.
340K
Power
120V
Speed (OPM)
14,000
Pad Size (in)
4-1/8 x 4-1/2
Random Orbit Sanders
• 2.4 amps, AC only
• For 5" hook and loop abrasives
(5 hole)
• 3/32" orbit
• Sandtrap dust collection canister
• Random, swirl-free
sanding action
333VS
• Pad control feature prevents
pad spin-up when tool is lifted off work
• 100% ball bearings
• Standard equipment: 150G disc and operating manual
2.3 amps, AC/DC
1/8" orbit; 10,000 OPM
100% ball bearings
Smooth, low vibration
Sands flush and into corners
Standard equipment: 120G abrasive sheet and operating
manual
Order No.
5029.00675
•
•
•
•
Order No.
5029.00681
Half-Sheet Finishing
Sander
•
•
•
•
•
•
1/4 Sheet Palm-Grip
Finishing Sander Kit
Pad Size (in)
4-1/8 x 9-3/8
Order No.
5029.00684
5029.00687
5029.00690
5029.00693
Mfg. No.
333
333VS
15005
15006
Power
Speed (OPM) Abrasive Type
120V
12,000
5" hook and loop
120V
5,000-12,000 5" hook and loop
5" hook and loop sponge pad, 2/pkg
5" lambs wool polishing pad, 1/pkg
ELECTRIC POWER TOOLS
1/4 Sheet Finishing
Sander with Dustbag
•
•
•
•
•
•
•
Palm grip design for comfort
Ball bearing construction
Powerful 1.6A motor
14,000 OPM for super smooth sanding
Quick changing hook-and-loop system abrasive paper
Dustbag for a cleaner work area and extended paper life
Flush sanding on three sides
Order No.
5029.00700
Mfg. No.
BO4551
Includes:
Abrasive paper #60 Grit (742529-7);
#100 Grit (742530-2); #150 Grit (742531-0)
Dustbag (166027-1)
3" x 24" Belt Sander
•
•
•
•
•
•
•
All ball and needle bearings for long life
Extended base to allow flush sanding
Replaceable ceramic wear plate
Highly efficient dust collector
Double insulated
16 foot power cord
Easy lever control to
change belts
• Low profile for balance and less gouging
• Powerful motor for fast stock removal
Order No.
5029.00703
Mfg. No.
9924DB
Heavy-Duty 1/4
Sheet Palm Grip
Sander
• Counter-balanced low-vibration
design reduce user fatigue
• Dust-sealed switch for increased durability
• Sealed 100% ball-bearings provides longer life
• DW411K includes dust bag, sandpaper punch and kit box
Order No.
Mfg. No.
5029.00721 DW411K
Amps
2.0
OPM
13,500
Dust sealed switch
yes
Heavy-Duty 5"
Random Orbit
Sander
• Maintains controllable pad
speed and minimizes gouging dust start up
• Dual-plane counter-balanced fan reduce user fatigue
• Sealed 100% ball-bearing construction provides longer life
• DW422 includes dust bag with built-in vacuum adapter
• DW421K same as DW422 plus kit box
• Use with 5" 8 hole PSA discs or hook and loop discs
Order No.
Mfg. No.
5029.00724 DW421K
5029.00727 DW422
Includes:
Abrasive belt #80 Grit (742365-1A);
Dustbag (122296-4)
Amps OPM
2.0
12,000
2.0
12,000
Dust sealed switch
yes 5”, 8-hole PSA™
yes 5”, 8-hole Hook & Loop™
Heavy Duty 3" x 21" Belt Sander
7336 6" RandomOrbit Sander
Variable-Speed
•
•
•
•
•
7336
3.7 Amps, AC only
Electronic variable-speed dial 2,500-6,000 OPM
Random, swirl-free sanding action
Spiral/bevel gears; 100% ball bearings
Standard equipment: 80G disc, 100G disc, 120G disc,
150G disc, wrench #48779, and operating manual
Order No.
5029.00706
5029.00709
5029.00712
Mfg. No.
7336
18005
18007
Power
Speed (OPM)
120V
2500-6000
6" hook and loop sponge pad, 2/pkg
6" lambs wool polishing pad, 1/pkg
3" x 21" Belt Sander
•
•
•
•
•
•
50
• Compact, lightweight design
permits use in tight spaces or
vertical surfaces
• Self-tensioning belt system prevents misalignment of belts
• Front-mounted dust bag allows
full visibility of the work surface
• Electronic feedback for constant load speed (DW431
only)
• Large, flat steel platen provides a better finish
• Includes: Dust bag and 1 medium grit belt
Order No.
5029.00730
5029.00733
Mfg. No.
DW430
DW431
Amps
5.2
5.2
SFPM
1,100
475-1,000
Belt Size (in)
3 x 21
3 x 21
351
8 Amp motor
Dust bag swivels 360˚
Fingertip belt-tracking know
Quick-release belt-change lever
Designed for flush sanding
Model 352VS Standard equipment: 100G ceramic aluminum oxide belt #71 102 10 05, dust bag assembly
#39334 and operating manual
Order No.
5029.00715
5029.00718
Mfg. No.
351
352VS
Power
120V
120V
Belt Speed
(SPFM)
1,300
850-1,300
Belt Size
(in)
3 x 21
3 x 21
725
ELECTRIC POWER TOOLS
14 Gauge
Unishear® Shear
18 Gauge Nibbler
1506
1529B
• Lightweight, balanced,
low vibration
• Visible blade for precise cuts
• Double-edged upper blade
• Cuts multiple types of
corrugated steel
• Downward ejection of chips
• 3-position head
• Small gear head; cuts in
tight areas
Order No.
5026.00256
Mfg. No.
1529B
Order No.
5026.00271
Amps
3.2
No Load SPM
2,500
Bosch Corrugated Nibbler
1507 Heavy Duty
• Two-handed control
• Visible blade for precise cuts
• Balanced with low vibration
Order No.
5026.00259
Mfg. No.
1534
Order No.
5026.00274
Amps
5.0
No Load SPM
1,700
14 Gauge Nibbler
1530
• Cuts flat stock, trapezoidal or
full square stock
• Burr-free edges
• Small gear head; cuts in
tight areas
Order No.
5026.00262
Mfg. No.
1530
No Load SPM
2,400
Bosch 10 Gauge Nibbler
• Cuts high-alloy steel and
stainless steel sheets
• Adjustable head and easily
resharpened punch
• Reversible side handle
• Downward ejection of chips
Mfg. No.
1533A
Amps
5.0
No Load SPM
1,000
16 Gauge
Unishear® Shear
Mfg. No.
1500B
No Load SPM
1,770
1508 Heavy Duty
• Balanced with low vibration
• 13 1/2" long; 15 pounds
• Ideal for structural fabrication, storage
tanks and roll stock manufacturing
• 2-position auxiliary handle
Mfg. No.
1508
Amps
9.2
No Load SPM
1,250
16 Gauge Shear
Order No.
5029.00736
Mfg. No.
JS1600
Includes:
Hex wrench (783201-2),
Shear blade set (191383-0)
•
•
•
•
5.0 amp motor
Top mounted thumb switch
Built-in thickness gauge
Cuts flat and corrugated sheet
metal with the same die
• Quick adjust 4-way swivel head for multi-directional cuts
• External brush caps for inspection of carbon brushes
• Lightweight, balanced,
low vibration
• No load SPM: 2,500; 3.2 amp
• Blades rotate 4 x 90°;
extends blade life
• Steel deflector
Order No.
5026.00268
Amps
8.6
16 Gauge Nibbler
1500B
726
Mfg. No.
1507
• 2.8 amp motor for use in
16-gauge mild steel and
18-gauge stainless steel
• Built-in thickness gauge
• Lever switch for comfort and easy use
• Easy replaceable blades with a total of 8 cutting edges
• Lightweight for easy one handed operation
• All ball and needle bearings for long life
• Double insulated
1533A
Order No.
5026.00265
No Load SPM
2,400
8 Gauge Unishear ® Shear
Order No.
5026.00277
Amps
4.6
Amps
4.6
10 Gauge Unishear ®
Shear
1534
• Small gear head; cuts through
tight corners
• Cuts through 16 gauge steel
• Ejects chips downward; away
from workpiece and operator
• 3-position head
50
Mfg. No.
1506
Amps
3.2
No Load SPM
2,500
Order No.
5029.00740
Mfg. No.
JN1601
Includes:
Punch (A-15067), Hex wrench (783208-8)
Wrench (781013-7), Die (A-15051)
ELECTRIC POWER TOOLS
5" Disc Grinder
AC/DC
4-1/2" Disc Grinder
AC/DC, 6.9 Amps
• Powerful 6.9 amp motor
for varied applications
• 1180 max watts out
• Reverse airflow design for
cooler extended operation
• Helical cut gears for maximum transfer of power
• Includes: resinoid wheel (A36) 701045, side handle
994322, wrench 938332Z, wheel guard 938314
Order No.
5029.00743
Mfg. No.
612SA
Speed
(rpm)
10,000
Amps
6.9
Spindle
Thread (in)
5/8-11
4-1/2" Disc Grinder
AC/DC, 8.2 Amps
• Powerful 8.2 amp
motor for heavy duty
grinding and cutting
• Tool-less adjustable wheel guard
• Quiet Cool™ air flow design generates less noise and runs
cooler
• 1550 max watts out
• Includes: wheel guard 311745, resinoid wheel (A36)
701045, side handle 994322, wrench 938332Z
Order No.
5029.00746
Mfg. No.
G12SE
Speed
(rpm)
10,000
Amps
8.2
Spindle
Thread (in)
5/8-11
5" Disc Grinder
• Powerful 11 amp motor,
2,000 max watts out
• Low-profile head permits
access in tight areas
• Dust seal prevents dust from entering the ball bearing on
the commutator side
• Compact and lightweight for greater mobility
• Includes: wrench 937913Z, resinoid wheel 701050, side
handle 956633, wheel guard 315089
Order No.
5029.00749
Mfg. No.
G13SC2
Speed
(rpm)
10,000
Amps
11
Spindle
Thread (in)
5/8-11
• Quiet cool air flow
design generates less
noise and runs cooler
• Convenient tool-less
wheel guard for quick adjustments without tool
• 15 degree forward-angle side handle
• Includes: resinoid wheel 701050, side handle 994332,
wrench 938332Z, wheel guard 311742
Order No.
5029.00757
Mfg. No.
G13SE
Speed
(rpm)
10,000
Amps
8.2
Spindle
Thread (in)
5/8-11
1" Die Grinder
• High output 4.7 amp,
610 W motor
• Large slide switch for easy one-hand operation
• For finishing dies, press work, die casting and molding
• Small size allows internal grinding of tools and parts
• Includes: collet chuck 985136, 2 wrenches 936638 and
936553
Order No.
5029.00760
Mfg. No.
GP2
Amps
4.7
Speed (rpm)
10,000
Collet (in)
1/4
4-1/2" Magnum®
Sander/Grinders
•
•
•
•
•
•
•
Double insulated
Spiral bevel gears
All ball and roller bearing construction
3-position side handle; adjustable wheel guard
Cast aluminum gear housing with recessed spindle lock
Paddle switch with integrated lock-off button
Optimum speed range for resin bonded abrasives, wire
brushes, resin fibre discs and abrasive flap discs
• Standard equipment: Side handle, spanner wrench,
grinding disc, guard and flange set
Order No.
5029.00763
Mfg. No.
6148-6
RPM
10,000
(AC-DC)
120V
50
Amps
8.5
7" & 9" Disc Grinder
AC/DC, 15 Amp
• 2900 max watts out
• Powerful 15 amp motor
for heavy duty grinding
• Dust-proof switch housing
• Low-noise cooling fan reduces noise
• 3-position handle provides ultimate comfort and control
• Includes: wrench 937913Z, side handle 937981, hex bar
wrench 872422, wheel guard 937960Z, resinoid wheel
701070
Order No.
5029.00752
5029.00755
Mfg. No.
G18SE2
G23SC2
Amps
15
15
Size
(in)
7
9
Speed
(rpm)
6,000
6,000
Spindle
Thread (in)
5/8-11
5/8-11
4 1/2" Angle
Grinder
•
•
•
•
•
•
•
Switch with lock on feature
Spindle lock
Toolless guard adjustment; 2-position side handle
Metabo safety clutch; Auto-stop carbon brushes
Aluminum die-cast gear housing
7/8" arbor size; 5/8-11 spindle thread
Includes: side handle, wheel guard, flange nuts, face
spanner and carrying case
Order No.
5029.00766
Mfg. No.
06 204
Wheel
Dia. (in)
4-1/2
Speed
(rpm)
10000
Weight
(lb)
4.8
Length
(in)
11
727
ELECTRIC POWER TOOLS
9" Right Angle Grinder
1754G
4-1/2" Angle Grinder
• 4.5 H.P.
• Rotating handle
• 5/8"-11 spindle
1347A, 1347AK
• No load RPM: 11,000; 6.0 amp
• Spindle lock; quick wheel changes
• 5/8"-11 spindle
Order No.
5026.00300
5026.00303
Mfg. No.
1347A
1347AK
Order No.
5026.00321
Amps
No Load RPM
6.0
11,000
4-1/2" angle grinder kit
1375A
• Spindle lock; quick wheel changes
• 5/8"-11 spindle
Mfg. No.
1375A
Amps
6.0
No Load RPM
11,000
Amps
7.0
No Load RPM
11,000
5" Angle Grinder
Amps
8.5
RPM
2,800–11,000
Amps
15.0
No Load RPM
6,000
Max. power 4.5 H.P.
Rotating handle
5/8"-11 spindle
7" & 9" guards are available; guards NOT included
Order No.
5026.00333
Mfg. No.
1754
Amps
15.0
RPM
6,000
Order No.
5026.00336
Mfg. No.
1210
Amps
4.6
No Load RPM
27,000
Amps
4.6
No Load RPM
27,000
Die Grinder
1215
•
•
•
•
Heavy-duty; precision grinding
3.2 pounds
4" spindle length
Ball-and-needle bearings;
less vibration
• 1/8" – 1/4" collet
1752G
• 3.0 H.P.
• Protected motor
• 5/8"-11 spindle
Mfg. No.
1752G
RPM
6,000
5,000
1210
9" Right
Angle Grinder
Order No.
5026.00318
Amps
15.0
15.0
• Light weight and compact
• 1/8" - 1/4" collet
• Abrasion resistant motor
• Spiral bevel gears for smooth
power transmission
728
Mfg. No.
1752
1757
Utility Grinder
1752G7
Mfg. No.
1752G7
Order No.
5026.00227
5026.00230
•
•
•
•
7" Right Angle
Grinder
Order No.
5026.00315
3.0 H.P.
15.0 amps
Abrasion resistant motor for long service life
5/8"-11 spindle for popular accessories
7" & 9" guards are available; guards NOT included
1754
• 1.8 H.P.
• Variable speed, electronic;
maintains speed and torque
• Clic quick guard changes; no
tools needed
• 5/8"-11 spindle
Mfg. No.
1703AEVS
RPM
6,000
Angle Sander
1703AEVS
Order No.
5026.00312
Mfg. No.
1754G7
Angle Grinder
•
•
•
•
•
• 1.4 H.P.
• AC/DC switch
• 5/8"-11 spindle
50
Amps
15.0
9" Right Angle Grinder
1752, 1757
1700A
Mfg. No.
1700A
RPM
6,000
1754G7
Order No.
5026.00324
4-1/2" Angle Grinder
Order No.
5026.00309
Amps
15.0
• 4.5 H.P.
• Rotating handle
• 5/8"-11 spindle
4-1/2" Angle Grinder
Order No.
5026.00306
Mfg. No.
1754G
Amps
15.0
RPM
6,000
Order No.
5026.00339
Mfg. No.
1215
ELECTRIC POWER TOOLS
6" BIG 6-Grinder ™
4-1/2" MiniGrinder™
Combines speed with power
to remove more material
faster and with less effort.
Used daily in production and
maintenance jobs to blend and finish welds, cut off bolts,
fine finish sheet metal, remove rust and scale, etc.
• Spindle thread: 5/8"-11
Extensive use of electronics
doubles grinding output
compared to a standard
sander/grinder twice its
weight. Constamatic electronics drive the grinding spindle at the selected speed even
under load. Adjustable speeds from 6,000 to 9,000 rpm.
Well suited for grinding, cutting, blending and finishing.
• Spindle thread: 5/8"-11
Order No.
5029.00800
Order No.
5029.00812
Mfg. No.
6161
RPM
10,000
Motor
120V AC
Amps
7.0
Same great performance
and reliability as the famous
Mini-Grinder but wrapped up in a
new body with full grip rear handle and
integrated paddle switch without lock-on for
maximum operator comfort and safety. Comfortable to
operate right or left handed.
• Spindle thread: 5/8"-11
Mfg. No.
6162 MINI-S
Motor
120V AC
Amps
7.0
Amps
12.0
These full-size industrial angle
grinders now deliver even more
power and speed to get
heavy-duty grinding and
finishing jobs done faster and
with less effort. Spindle lock for
fast and easy changing of tooling.
Ideal for beveling, taking down
heavy welds, edge cleaning, finishing of large surfaces, etc.
• Spindle thread: 5/8"-11
Order No.
5029.00815
5029.00818
Mfg. No.
6170
6190
RPM
8,500
6,600
Motor
120V AC
120V AC
Watts
2,000
2,000
50
Dialspeed™ Grinder 6141
4-1/2" Mini-Plus
Grinder™
Most versatile small angle
grinder with 6 adjustable spindle
speeds from 3,000 to 10,000 rpm.
Pos. 1 for polishing; Pos. 2 for fine finishing with Deco discs; Pos. 3 for finishing
with non-woven surface conditioning material; Pos. 4 for
working with flap discs; Pos. 6 for rough grinding, cutting
and brushing.
• Spindle thread: 5/8"-11
Order No.
5029.00806
Motor
120V AC
Maxi-Grinder™ – 7" & 9"
S-4-1/2" MiniGrinder™
Order No.
5029.00803
Mfg. No.
6260
Mfg. No.
6255 MINI-PLUS
Motor
120V AC only
Amps
7.5
A new concept in fitting and
finishing work with mounted
points, carbide burrs, flap wheels,
wire brushes, cut-off/grinding
wheels, etc. Elongated spindle
housing assures a secure grip
when working in tight corners
and hard to reach places
Order No.
5029.00821
Mfg.
No.
6141
Collet
Dia. (in)
1/4
RPM
16,000-27,000
Motor
120V AC
HP
3/4
Motor
120V AC
HP
3/4
Straight Grinder 6145
5" Super 5-Grinder ™
The perfect intermediate size
grinder. It has the extra power
and the right speed to take
care of those tough jobs where
the Mini-Grinder™ is too small
or where the weight of a full-size
grinder would slow down the
operator. Excellent for weld grinding, breaking of edges, cleaning
up of shapes and profiles, cutting off angle iron, etc.
• Spindle thread: 5/8"-11
Order No.
5029.00809
Mfg. No.
6150
RPM
10,000
Motor
120V AC
Amps
8.5
A specialized tool for finishing, brushing and polishing
work with mounted flap
wheels and wire brushes. Offset spindle allows to work
parallel to flat work pieces, producing a uniform straight line
finish. Excellent to clean up
and finish shaped objects and
to reach into confined spaces.
Order No.
5029.00854
Mfg.
No.
6145
Collet
Dia. (in)
1/4
RPM
3,000-6,000
729
ELECTRIC POWER TOOLS
Disc Grinder
4-1/2" Angle Grinder
6.4 Amp, Paddle Switch
• 2-position removable side
handle for greater control
• Sliding switch
• Includes: Depressed center wheel, wrench, backing
flange, clamp nut and guard
•
•
•
•
•
Small circumference barrel grip
Spindle lock
Powerful 6.4 amp motor, double insulated
Motor and bearings sealed from contamination
Spiral gears for efficient power transmission
Order No.
5029.00857
5029.00860
Mfg. No. Includes:
9527PB 4-1/2" Depressed centre wheel (741451-5),
Lock nut wrench (782412-6), Side handle
(152490-4), Lock nut (224509-0), Inner
Flange (224332-3), Wheel guard (165053-7)
9528PB 5" Grinding wheel (794046-3), Lock nut
wrench (782412-6), Side handle (152490-4),
Lock nut (224509-0), Inner Flange (224332-3),
Wheel cover (165055-3)
5" Disc Grinder
AC/DC, 9.0 Amp
•
•
•
•
•
•
•
50
Ball bearing construction
AC/DC lock-on switch
5/8-11 UNC spindle
Removable side handle can be installed on either side
Powerful 9 amp motor; lightweight for high productivity
Shaft lock for easy accessory changes
Double insulated
Order No.
5029.00863
Mfg. No.
9005B
Includes:
Grinding wheel (794046-3), Wheel guard
(164554-2), Side handle (152492-0), Inner
flange (224178-7), Lock nut (224509-0),
Lock nut wrench (782412-6)
7" Disc Grinder
Order No.
Mfg. No.
5029.00872 DW400
Amps
5.0
RPM
10,000
Order No.
5029.00866
Mfg. No.
9607NB
Includes:
Depressed centre wheel (741413-3),
Side handle (152492-0), Wheel guar d
(191235-5), Inner flange (224111-9),
Lock nut wrench (782412-6)
7"/9" Sander-Grinder
AC/DC, 15 Amp
• All ball and needle
bearing construction
• Extra heavy-duty
• 6,000 rpm
• Removable side handle
• Accepts 7" or 9" wheel with correct guards
• AC/DC switch for using alternative power source
• Spindle 5/8-11; spindle lock for easy wheel changes
• Use as a 9" grinder with optional accessory kit
730
Order No.
5029.00869
Mfg. No.
GA7910
Includes:
7" / 9" Sander Grinder, Side handle (152492-0)
Spindle
Thread (in)
5/8-11
4-1/2" Angle Grinder
• Metal gear case
• Convenient paddle switch
with lock-on button
• 3-position removable side handle for greater control
• Includes: Depressed center wheel, wrench, backing
flange, clamp nut and guard
• DW402 also available in 220V
Order No.
Mfg. No.
5029.00875 DW402
Amps
7.5
RPM
10,000
Spindle
Lock
yes
Spindle
Thread (in)
5/8-11
5" Angle Grinder
High Power
• Metal gear case dissipates
heat for longer life
• Sealed switch and ball & roller bearings
• Sliding switch is convenient for extended use application
• Keyless adjustable guard
• Includes: Side handle, depressed center wheel, wrench,
backing flange, clamp nut and guard
AC/DC, 15 Amp
• AC/DC switch
• 3-point tool rest on top
• Shaft lock for easy
wheel changes
• Heavy-duty 15.0 amp Makita motor; double insulated
• Side handle can be used on either side
Spindle
Lock
yes
Order No.
Mfg. No.
5029.00878 DW821
Amps
7.8
RPM
11,000
Spindle
Lock
yes
Spindle
Thread (in)
5/8-11
Heavy-Duty
7" Angle Grinder
• 3-position side handle for
greater comfort and control
• External brush doors for easy servicing
• Includes: Depressed center wheel, wrench, backing
flange, clamp nut and guard
Order No.
Mfg. No.
5029.00881 DW474
Amps
15.0
RPM
6,000
Spindle
Lock
yes
Spindle
Thread (in)
5/8-11
Heavy-Duty
2" Die Grinder
• 120V AC/DC capacity works off welding machines and
generators for increased productivity and versatility
• External brush doors for easy servicing
• Precision 1/4" collet for maximum gripping strength
• Includes: 2 wrenches, 1/4" collet and 1/8" reducing sleeve
Max. wheel
Order No.
Mfg. No. Amps RPM diameter (in) Collect Size (in)
5029.00884 DW888 5.0
19,000 2.0
1/8, 1/4
ELECTRIC POWER TOOLS
Speedmatic® 3-1/4 HP Router
Five-Speed
2 HP
Electronic Router
1617EVS
• Precision centering design
• Linear height
adjustment system
Order No.
5026.00342
Mfg. No.
1617EVS
Amps
12
No Load RPM
8,000-25,000
• 15 amps AC
• Electronic five-speed with soft
start 10,000, 13,000, 16,000,
19,000, 21,000 rpm
• Maintains constant speed under load
• 1/2" collet with auto-release collet
system
• 100% sealed ball bearings
• Precision machined aluminum motor housing and base
• Standard equipment: motor #75182, base #75361, 1/2" collet
#42950, 2 collet wrenches #42596, and operating manual
Order No.
5029.00890
2 HP Electronic Variable
Speed Plunge Router
Mfg. No.
7518
Voltage
120V
1613EVS
2 HP Plunge Router
• Microfine bit depth adjustment is
made from any plunge position
• Electronic feedback circuitry; soft
start and constant RPM
• Six-position variable speed control
•
•
•
•
Order No.
5026.00345
Mfg. No.
1613EVS
Amps
11
No Load RPM
12,000-22,000
Power
3-1/4HP
RPM
5 speeds
12 amp AC motor
Includes 1/4" and 1/2" collets
Electronic brake
Micro height adjuster ideal for under
table and free hand applications
• Unique depth stop allows depth
adjustments without removing your
hands from the handles
• Dust collection with unique dust cup for edge routing
• Standard equipment: wrench, dust cup, and operating manual
Order No.
5029.00893
Mfg. No.
7529
Voltage
120V
Power
2HP
RPM
10,000-23,000
1-1/2 HP Plunge Router
1-3/4 HP Router
1617
• Precision centering system
• Linear height adjustment
Order No.
5026.00348
Mfg. No.
1617
Amps
11
No Load RPM
25,000
• 10 amp AC motor
• 1/4" and 1/2" collets with autorelease collet system
• 2-1/2" plunge range
• Depth rod and 6-position step
turret
• Precision machined aluminum
motor housing and base
• Standard equipment: motor #6902, base #6931, 1/4" collet
#42999, 1/2" collet #42950, 2 collet wrenches #42596,
and operating manual
Order No.
5029.00896
Speedmatic® 3-1/4 HP
Plunge Router
Mfg. No.
693
Voltage
120V
Power
1-1/2HP
RPM
23,000
Five-Speed
1-1/2 HP Router
• 15 amps AC
• Electronic five-speed with soft start
10,000, 13,000, 16,000, 19,000,
21,000 rpm
• 100% sealed ball bearings
• 1/2" collet with auto-release system
• Unique design puts bottom bearing closer to work for minimum bit run-out and vibration
• Depth rod and 6-position step turret
• Precision machined aluminum motor housing and base
• Standard equipment: 1/2" collet #42950, 2 collet wrenches
#42596, and operating manual
• 10 amp AC motor
• 1/4" and 1/2" collets with autorelease collet system
• Precision machined aluminum
motor housing and base
• 100% sealed ball bearings
• Micrometer depth-of-cut adjustment
• Standard equipment: motor #6902,
base #1001, 1/4 collet #42999, 1/2" collet #42950, 2 collet wrenches #42596 and operating manual
Order No.
5029.00887
Mfg. No.
7539
Voltage
120V
Power
3-1/4HP
RPM
5 speeds
Order No.
Mfg. No.
Voltage
5029.00899
690
120V
5029.00902
9690*
120V
*Includes #690 with HD carrying case
Power
1-1/2HP
1-1/2HP
50
RPM
23,000
23,000
731
ELECTRIC POWER TOOLS
Heavy-Duty 2 HP VS Plunge Router
3-1/4 HP Plunge Router
• Electronic variable speed motor
runs at 8,000–24,000 rpm
• Constant speed under load
ensures a quality finish
• Rack and pinion depth adjuster,
with micro-fine adjusting allows
quick, accurate set ups
• Built-in dust extraction attached to
a vacuum removes 95% dust
• On/off switch built-into handle for
maximum user control
• Includes: 1/4" and 1/2" collets, temperature guide bushing
adapter and wrench
Can serve as a handheld router when
mounted under a table, the router can
take the place of a more expensive
spindle shaper.
• 15 amps
• 120 volts; 1800 Watts
Order No.
Mfg. No.
5029.00905 DW621
Amps
9.0/10.0
HP
2
RPM
8,000-24,000
Spindle
Lock
yes
Heavy-Duty 1-1/2 HP
Router
50
Amps
9.0
HP
1.5
Base
Dia. (in)
6-9/16
This edge guide fits the Freud
FT2000E router as well as many other
popular routers.
Order No.
Mfg. No.
5029.00917 FT2010
Description
Micro-adjustment feature makes set-up a snap
RPM
25,000
Description
Allows you to use 1/4" bits in your router
FT1100 Template Guide
Adapter Plate
FT1200 Template Guide Lock
Nut
Spindle
Lock
n/a
Template guides are great for cutting
complex designs with the router
where many identical pieces are
needed. Select a template guide slightly larger than the bit
you will be using, and then size your template accordingly.
Order No.
5029.00923
5029.00926
5029.00929
5029.00932
5029.00935
5029.00938
5029.00941
Exclusive accessory pack standard
Includes: straight guide – 956797, bar holder 956792, feed
screw 956793, 3 wing bolts 949394, 11/16" template guide
956790, wrench 956923, straight bit 313765 1/4", chuck
sleeve 956927Z, template guide adapter 956756, 2 lock
springs 947859
Capacity
(in)
1/2 collet
Plunge
Cap. (in)
2-3/4
Edge Guide for Router
Order No.
Mfg. No.
5029.00920 FT2030
3-1/4HP 1/2" Plunge Router
Order No.
Mfg. No. Amps
5029.00911 M12V
15
Collet
Dia. (in)
1/2
This collet fits Freud’s FT2000E router.
• Powerful 15 amp motor
• Multi-slide scale and scale index
system for accurate plunge depth
adjustment
• Variable electronic speed with soft
start switch to prevent torque kickback
• 3-position adjustable handles for
operator comfort and control
• Electronic speed control maintains
speed throughout
732
Range
(rpm)
8,000-22,000
1/4" Collet
• Rack and pinion depth adjustment
for quick, accurate setup
• All-metal housing, metal fan and
100% ball bearings provide superior durability
• Accept standard temperature
guide busting with no special adapters
• Includes: 1/4" and 1/2" collets
Order No.
Mfg. No.
5029.00908 DW610
Order No.
Mfg. No.
5029.00914 FT2000E
Speed
(rpm)
8,000-20,000
Mfg. No.
FT1301
FT1302
FT1303
FT1304
FT1305
FT1306
FT1307
Outside
Dia. (in)
5/16
3/8
7/16
1/2
5/8
51/64
3/4
Inside
Dia. (in)
1/4
9/32
11/32
13/32
17/32
5/8
21/32
Guide
(in)
5/32
5/16
5/32
5/16
9/16
9/16
9/16
ELECTRIC POWER TOOLS
Laminate Trimmer
•
•
•
•
•
•
•
•
Portable Thickness
Planer
5.6 Amps, AC/DC
30,000 RPM
1/4" collet
Spindle lock
Precision cast aluminum base
Micro-set depth-of-cut adjustment knob
100% ball bearing construction
Standard equipment: motor #7301,
standard trimmer base #7309, collet
wrench #44745, and operating manual
Order No.
5029.00944
Mfg. No.
7310
Power
120V
Heavy-Duty 12-1/2"
Collet
1/4
RPM
30,000
Heavy-Duty 7/8 HP
Laminate Trimmer
Fixed Base
• Precision-machined, cast aluminum
fixed base for increased accuracy
• Adjustable ball-bearing and plate guide
follower allow use with straight or template work
• Tool-free base change, height and
edge guide adjustment
• Includes: 1/4" collet
Order No.
Mfg. No. Amps HP RPM
Spindle Lock
5029.00947 DW670 5.6
7/8 30,000 yes
Deluxe Plate
Joiner Kit
•
•
•
•
•
•
•
•
•
•
•
•
7.5 amps, 120V
Lock-on trigger
Height scale accurate at any angle
Fence tilts from 0° to 135° with positive adjustable stop at
90°
Precise micro height-adjustment knob
Includes both 2" and 4" diameter blades for standard and
face-frame biscuits
Includes plate for centering stock to the 2" blade
Seven-position rotating depth stop for FF, #0, #10, #20,
Simplex, Duplex, and Max (#6) biscuits
Bale handle attached to fence, not motor, for greater stability and added control during cuts
1" O.D. dust port accepts standard bag or can be connected to a vacuum for a clean work environment
Includes plate joiner #5557, 2" blade #5559, 4" blade
#5558, centering plate #888776, spanner wrench
#886041, dust bag #883175, chip deflector #886490,
and operating manual
Biscuit sizes: FF, #0, #10, #20, simplex, duplex, and #6
Order No.
5029.00950
5029.00953
5029.00956
Mfg. No.
5557
5558
5559
Voltage
RPM
120V
10000
4" blade, 6 tooth, carbide tipped
2" blade, 4 tooth, carbide tipped
• Only thickness planer with a four-column head lock that secures the cutterhead against four steel posts,
greatly reducing the movement that causes snipe
• Extra-long infeed and outfeed table provide 33" of material support
• Powerful 15.0 Amp motor
• 10,000 RPM cutterhead speed provides 64 cuts per inch
• turret depth stop allows the user to return to the most frequently used thickness (1/4", 1/2", 3/4") quickly and easily
• Knives are made of M2 laminated high speed tool steel
• Knives can be resharpened multiple times
• Thickness scale, material removal gauge and graduated
depth crank make accurate planing easy
• Magnetic knife setting gauges and wrenches store
onboard for fast, easy and accurate knife changes
Order No.
5029.00959
Mfg. No.
DW733
Amps
15.0
RPM
10,000
Depth Cap. (in)
6
HE 2000 Hot Air Gun
50
Electronic 3-speed variable temperature hot-air gun.
• Three air-flow rates
• Electronic control for progressive
temperature variation
Order No.
5029.00962
Mfg. No.
02 005
Air Flow
(CFPM)
8.8/9.5/17.7
Air
Temp. (˚C)
50 – 600
Heat Guns
•
•
•
•
•
•
Double insulated
Efficient soft air velocity
Cool air inlet design
Unique impact-resistant heating element
3-position rocker switch: off, high and low
Support stand enables heat gun to be stationary for workbench or assembly work
• For use by plumbers, painters, floor covering installers,
technicians, boat builders, food processing, industry
mechanics, contractors, body shops, photographers,
schools, laboratories
• Dual temperature: 570°F and 1000°F; rotate rear housing
to select temperature ranges, 140°F to 1040°F
• 120V (AC only)
Order No.
5029.00965
Mfg. No.
8975-6
Air Volume
Cu. Ft. Min.
14.8
Amps
11.6
733
ELECTRIC POWER TOOLS
T50® Heavy Duty Staple Gun
Professional
Loads (85) Arrow #T50® staples only of
.050 wire.Ceiltile®. Monel® and stainless
steel rustproof staples available.
Electric Nail Guns
T5O® PBN Staple and Nail Gun
ProShot® 1 ET125™
Loads (85) Arrow #T50® staples or
loads (85) 5/8" Arrow BN1810 nails.
Uses 1-1/4" 18 gauge brad nails.
14 amps of power.
Order No.
5029.01000
7099.04200
Mfg. No.
ET125
Description
ProShot Electric Nail Gun
1-1/4" - 18 G Brad Nails
Narrow Crown
Electric Staple Gun
ProShot® ET150™
Shoots 3 sizes of staples, 3/8",1/2",
9/16". Solid state circuitry and a
7/8" extended nose. Use 1 mm, 3core extension cable.
Order No.
5029.01003
7099.04203
7099.04206
7099.04209
50
Mfg. No.
ET150
1506
1508
1509
Product Description
Electric narrow crown staple gun
3/8” staple
1/2” staple
9/16” staple
Electric Brad Gun
Shoots 3 different size brads:
5/8", 3/4" and 1".
• 10 amps of power.
Mfg. No.
ET100
Description
Heavy Duty Nail Master Brad Gun
5/8" Brads
3/4" Brads
1" Brads
Heavy Duty
Electro-matic®
Nail and Staple Gun
Drives BN1810 5/8" nails and
shoots 6 sizes of T50 ® staples, 1/4",
5/16", 3/8", 1/2", 9/16" and 17/32"
Ceiltile®, Monel® and stainless steel
rustproof staples available.
Order No.
5029.01007
Mfg. No.
ETF50PBN
Uses 4 rivet sizes: 3/32", 1/8",
5/32" and 3/16". 4 nose
pieces with wrench.
Order No.
5039.00001
Mfg. No.
RH200
Description
Length
HD Staple Gun
Staple & Nail Gun
Staples
1/4"
Staples
5/16"
Staples
3/8"
Staples
1/2"
Staples
9/16"
Nails
5/8"
T50PBN
Hammer Tacker
Heavy Duty
Loads 2 full strips (170) Arrow
T50 staples of .050 wire in 3
sizes: 5/16", 3/8" and 1/2".
Order No.
Mfg. No. Description
5039.01015 T59
Hammer Tacker - Use with T50 Staples
Model T18™ loads (85) T18 staples
with 3/16" crown-divergent point of
.050 wire.
Order No.
5039.01018
7099.04239
7099.04242
Mfg. No.
T18
T18
T18
Description
Wire Tacker
Staples
Staples
Length
T18
3/8"
7/16"
Model T25™ loads (85) T25 staples
with 1/4" crown-divergent point of
.050 wire.
Order No.
Mfg. No.
5039.01021 T25
7099.04245 T25
7099.04248 T25
7099.04251 T25
7099.04254 T25
Description
Wire Tacker
Staples
Staples
Staples
Staples
Length
T25
9/32"
3/8"
7/16"
9/16"
Description
Electro-matic Nail and Staple Gun
RH200™ Rivet Tool
734
Mfg. No.
T50
T50PBN
T50
T50
T50
T50
T50
BN1810
Wire Tackers
ET100™ Heavy Duty Nail Master
Order No.
5029.01006
7099.04212
7099.04215
7099.04218
Order No.
5039.01009
5039.01012
7099.04221
7099.04224
7099.04227
7099.04230
7099.04233
7099.04236
T50
Description
Professional Rivet Tool
Model T59™ Uses UL listed 5911 insulated staples. Holds two strips of 15
insulated staples: 1/4 x 1/4",
1/4 x 5/16" and 5/16 x 5/16"
Order No.
Mfg. No.
5039.01024 T59
7099.04257 T59
7099.04260 T59
7099.04263 T59
Description
Wire Tacker
Staples
Staples
Staples
Size
1/4x1/4"
1/4x5/16"
5/16x5/16"
T59
ELECTRIC POWER TOOLS
Framing Nailer
Full Round Head Coil
Wire Collation
2" to 3-1/4" x .099/.113/.120/.131
• Built-in toenail push lever
• Depth-drive adjustment for
siding applications
• Open nose for ease of clearing jams
• Plastic shield to deflect wire collation
• Single trip trigger mechanism-part no. 876762
Order No.
5029.01027
Operating Air
Pressure (psi)
70-120
Mfg. No.
NV83A
Single-Stage
Dust Collectors
Includes motor and blower, dust collection bags, support drum, 4" diameter
dust intake ports, intake port cap, base,
four swivel caster assemblies, cord and
50-851
plug, and instruction manual.
Nail Capacity
200-300
Air Inlet (in)
3/8
Roofing Nailer
Coil Wire Collation
7/8" to 1-3/4" x .120
• Steel body wear protectors
• Depth of drive adjustment for precision nailing
• Carbide tipped push lever to
reduce wear
• Rubber safety valve covering resists dirt, tar, etc.
• Single trip trigger mechanism – part no. 878226
Order No.
Mfg. No.
5029.01030 NV45AB
Operating Air
Pressure (psi)
70-120
Nail Capacity
120
Order No.
Mfg. No.
HP
Voltage
5029.01042
50-850
1-1/2
115V single phase
5029.01045
50-851
2
230V single phase
5029.01048
50-852
3
200V three phase
5029.01051
50-853
3
230V single phase
ACCESSORIES FOR MODEL 50-850
5029.01054
50-830
Dust bag, 1 micron, 2/pkg
ACCESSORIES FOR MODEL 50-851
5029.01057
50-832
Top dust bag, 1 micron
5029.01060
50-833
Bottom dust bag, 1 micron
5029.01063
50-834
3M short top bag, 1 micron, 2/pkg
ACCESSORIES FOR MODEL 50-852 & 50-853
5029.01066
50-836
Top dust bag, 1 micron
5029.01069
50-837
Bottom dust Bag, 1 micron
Air Inlet (in)
3/8
50
Cutting/Shaping Wheel
For cutting and shaping on soft and hard
woods, fibreglass, plastics and laminates.
• Do not use on metal
• Do not run in excess of 30,000 rpm
• Mandrel included
Industrial Wet / Dry Vacuum
•
•
•
•
Automatic float shut-off prevents overflow
Double filtration system
Durable stainless steel tank
Includes 8’ x 1-1/2’’ crushproof hose,
interlocking extension tubes, 16’’
floor brush attachment, 16’’
squeegee attachment and
heavy-duty caster
wheels for portability
• Tank Size: 10 gal
• Wet Capacity: 7-1/2 gal
• Air Flow: 83 ft 3 min
Fibreglass Reinforced
Cut-Off Wheels
For slicing and cutting metal, wood and
plastic. Cut easily through slot bolts,
screws, sheet metal, thin wood and plastics.
• Cut only along edge of cut-off wheels
• Do not attempt to sand or cut curved holes
• Diameter: 1-1/4"
• Thickness: .045"
Motor
(amp)
8
Filter
Bag
426
Cut-Off Wheels
Filter
Order No.
Mfg. No.
5026.01033 KC-2010B
ACCESSORIES
5026.01036 KM-015
5026.01039 KM-016
542
Voltage
110V, 1 phase, 60 Hz
Bag
Weight
(lb)
55
• Same as above except for
Thickness: .0625"
540
Order No.
1099.90001
1099.90004
1099.90007
Mfg. No.
542
426
540
Description
Cutting Shaping Wheel
Fiberglass Reinforced Cut-Off Wheels
Cut-Off Wheels
735
ELECTRIC POWER TOOLS
Variable Speed Grinder
High Speed
Rotary Tool Kit
Includes:
• Wrench
• 25 assorted accessories
• Customized storage case
Order No.
5029.01072
Mfg. No.
3981
Description
Rotary Tool Kit
Provides control and precision cutting
action. Ideal for special do-it-yourself projects using various speed
ranges for added versatility.
• 5,000-30,000 rpm
• Volts: 120
• Amps: 1.15 AC
Includes:
• Quick change nut
• Wrench
• 5 assorted accessories
Order No.
5029.01084
Mfg. No.
395
Description
Variable Speed Grinder
MultiPro Rotary
Grinder Kit
Variable Speed
Includes everything necessary to grind, sharpen, drill,
polish, sand and more.
• Wrench
• Storage case
• 72 assorted accessories
Order No.
5029.01075
50
Mfg. No.
3962
Description
Variable Speed MultiPro Grinder Kit
MultiPro Super Rotary
Grinder Kit
Single Speed MultiPro
Rotary Grinder
Ideal for sanding, carving and
drilling.
Includes:
• Wrench
• Quick change collet nut
• 5 assorted accessories
Order No.
5029.01087
Mfg. No.
275
Description
Single Speed Multipro Grinder Kit
Variable Speed
Includes flex-shaft for precision, hands-free operation. Cut, grind, carve,
rout, sharpen, drill, polish,
sand and much more.
Includes:
• Wrench
• Flex-shaft attachment
• 72 assorted accessories
• New customized storage case with accessory tray
Order No.
5029.01078
Mfg. No.
3956
Description
Variable Speed Super Grinder Kit
Multi Purpose Cutting Kit
Includes:
• Cutting guide
• 2 drywall cutting bits for cutting drywall for electrical boxes and air vents
• 1 multipurpose cutting bit for making
cuts in ceiling, tile, wood plastic,
fibreglass, drywall, laminate and vinyl
siding
• Cutting depth: 19 mm
Order No.
5029.01090
Mfg. No.
565
Description
Multi-purpose Cutting Kit
MultiPro Rotary
Grinder Kit
Two Speed
Ideal for multiple applications
on a variety of materials.
Includes:
• Wrench
• Quick change collet nut
• 30 assorted accessories
• Deluxe storage, carrying
case
736
Order No.
5029.01081
Mfg. No.
2850
Description
2 Speed Multipro Grinder Kit
Tile Cutting Kits
Includes:
• Cutting guide
• 1 tile cutting bit for shaping
ceramic wall tile around
fixtures or plumbing pipes
• Not for use on ceramic floor tile
• Cutting depth: 19 mm
Order No.
5029.01093
Mfg. No.
566
Description
Tile Cutting Kit
ELECTRIC POWER TOOLS
High Speed Cutter Set
H.D. Flex-Shaft Rotary Tool
Includes:
• Wrench and lock pin
• Lubricant
• 39" neoprene covered
flexshaft with spring
strain reliefs
• 1" handpiece
(model 236)
• Foot speed control
(model 221) for 0-full rpm
control
• Speed: 22,000 rpm
• 1/5 hp
• Collet capacity: 1/4"
Order No.
5029.01096
Mfg. No.
7360
• Do not run accessories
in excess of 30,000 rpm
• Cutter size from left to right:
5/16", 1/4", 5/16", 3/16",
1/8", 7/32"
Order No.
1099.90020
Mfg. No.
326
Description
High Speed Cutter Set
Router Bit Set
• Do not run accessories in
excess of 30,000 rpm
Order No.
1099.90023
Mfg. No.
602
Description
Router Bit Set
Description
Flex Shaft Rotary Tool Kit
Drill Bit Set
Flex-shaft Attachment
Ideal for hard to reach places.
• Easily attaches to corded rotary tool
• Cable is 36" long with a slim
1/2" diameter handpiece
Order No.
5029.01099
Mfg. No.
225
Description
Flex Shaft Attachment, 36"
• Do not run accessories in
excess of 30,000 rpm
• Drill size from left to right:
1/32", 3/64", 1/16",
5/64", 3/32", 7/64", 1/8"
Order No.
1099.90026
Mfg. No.
628
Description
Drill Bit Set
50
Structured Tooth
Carbide Cutter Set
Engraver
Includes:
• Carbide point (No. 9924) for
normal applications
• Diamond point (No. 9929) for
continuous use
Order No.
5029.01100
Mfg. No.
290
Description
Engraver, Carbide and Diamond Points
• Do not run accessories in excess of
30,000 rpm
• Cutter size: 1/4", 5/16", 5/16"
Order No.
1099.90029
Mfg. No.
9923
Description
Carbide Cutter Set
Tungsten Carbide
Cutter Set
• Do not run accessories in
excess of 30,000 rpm
Versatip Multi-purpose Tool
Includes:
• 6 different design tips
• Versatile tool stand
• 1,050˚F maximum tip
temperature
• Includes soldering tip
(470); general purpose
tip (471); grading tip (472); script tip (473);
fine cutting (474) and hot knife tip (499)
Order No.
5029.01003
Mfg. No.
1550
Description
Versatip Multi-purpose Tool
Order No.
1099.90032
Mfg. No.
9923
Description
Tungsten Carbide Cutter Set
Diamond Wheel
Point Set
• Do not run accessories in
excess of 30,000 rpm
Order No.
1099.90035
Mfg. No.
9927
Description
Diamond Wheel Point Set
737
ELECTRIC POWER TOOLS
Multipro Cordless Kit
Router Attachment
Transforms your corded rotary tool into a
precision router for edging, grooving and
freehand routing.
• Routes accurate circles
• Reversible edge guide gives precise
straight-line cuts
• Convenient bit storage in handle
Order No.
5029.01103
Mfg. No.
330
Description
Router Guide Attachment
• 2-speed
• 12 oz weight with battery
• Speed: 7500-15,000 rpm
• Motor: 7.2 v
• Collet capacity: 1/32"-1/8"
Includes:
• Quick change collet nut
• Customized storage case
• 3 hour charger
• 25 assorted accessories
Order No.
5029.01115
Mfg. No.
7700
Description
Multipro Cordless Kit
Multipro Chuck
Shaper/Router Table
Converts your corded rotary tool
into a bench mounted wood
shaper.
• Adjustable fence and large worktable
• Slot, groove, sand and trim edges
• Worktable size: 8" x 6"
Order No.
5029.01106
50
Mfg. No.
231
Description
Shaper/Router Table
Chainsaw Sharpening Attachment Kit
Easily sharpens the dullest of chains.
Includes:
• Sharpening attachment
• 3 sharpening stones
(No.’s 453, 454 and 455)
• For use with rotary tool No.’s
275, 285, 395, 398 and 595
• Gauge
• 2 spacers
• Instruction manual
Order No.
5029.01109
Mfg. No.
1453
Description
Chainsaw Sharpening Kit
Quickly and easily change accessories on
your rotary tools without changing collets.
• Use only with corded Multipro rotary tool
model No.’s 395; 285; 275; and 595
• Shank diameter: 1/32"-1/8"
Order No.
5029.01118
Mfg. No.
4486
Description
Multipro Chuck
Contour Sander Kit
Includes:
• Detail sanding pad
• 3 sheets of detailed sandpaper
• 10 sanding contours and
3 sanding tubes
• Dust collection attachment
Order No.
5029.01121
Mfg. No.
6000
Description
Contour Sander Kit
Right Angle Attachment
•
•
•
•
For “hard-to-reach” places
Compact, durable design
Shaft lock easy
Ball bearings and spiral bevel gears
provide smooth and cool operation
• Quick connect – no wrench required
Order No.
5029.01124
Mfg. No.
575
Description
Right Angle Attachment
Grout Removal Attachment
Drill Press Attachment
Convert your corded rotary tool
into a drill press.
• Easily modifies to a tool holder
for added versatility
• Includes rack and pinion feed
lever, large base and many
other features of larger units
738
Order No.
5029.01112
Mfg. No.
212
Description
Drill Press Attachment
Features and Benefits:
• Multiple slide depth adjustment
• Guides 180˚ apart to keep bit centered
between tiles
• Excellent cutting visibility
• 30 degree angle for controlled cutting
• Easy screw on mounting
• Includes 1 grout removal carbide bit 1/16" carbide bit
• Also available, 1/8" carbide bit
Order No.
5029.01127
Mfg. No.
568
Description
Grout Removal Guide Attachment
ELECTRIC POWER TOOLS
Hand Grinders
Series 10 Deluxe Kit
Extremely accurate and provides
exceptional ease of control with
less operator fatigue. Capable of
rotary filing, deburring, cleaning
and polishing. Two grease lubricated ball bearings. Precision
ground chucks provide for fast changeover, minimize run-out.
Back mounted on/off switch.
Our Membership
In IDI,
Is Win-Win-Win
Includes:
• Heavy-duty carrying case
• 10-351 hand grinder
• 8 assorted mounted
wheels
Order No.
5029.01130
Mfg. No.
10-355
• Dressing stone
• Two wrenches
• 1/8" reducing collet
Customers, suppliers and distributor
members alike reap the benefits of
this unique organization
Description
Hand Grinder Kit
Benefits to customers:
Series 35
Hand Grinder
• Complete inventories throughout Canada
1/4 HP
• Technical service expertise
Custom-manufactured motor provides ample power to handle
grinding applications using rotary files. Back-mounted
on/off switch prevents accidental tripping. Die-cast
aluminum housing.Two piece collet for quick tool change.
Includes: chuck wrench, spindle lock pin and 8 ft cord with
3-prong plug.
• 35,000 rpm speed
• 1/4" collet type chuck with 1/8" reducing sleeve
• 7/16-32 threaded spindle
• 1" diameter grinding wheel capacity
• Net weight of 3 lb 8 oz – shipping weight 5 lb
• Major 2-3/4" and 1-1/4" at chuck end are diameters
• 115V, AC/DC power source
• Access to over 500,000 different SKUs
Order No.
5029.01133
Mfg. No.
10-171
Description
Series 35 Hand Grinder, 1/4 HP
Series 9 Hand
Grinders
• Top quality distributor network
• Flexibility to meet customer needs
• Strong national capabilities coupled with local
expertise and flexibility
50
• Over 160 locations coast-to-coast
• Over 1,800 worldwide suppliers
• Central warehouse facility to reduce delivery
times and provide competitive prices
• Core competencies in Power Transmission,
Bearings and Industrial Supplies
• Commitment to integrated supply
For heavy-duty grinding
operations. Higher torque
manufactured 1/4 hp fan
cooled motor idles at
15,500 rpm.Threaded spindle allows for use of 1/4" shank
mounted wheels in collet chuck or 3/8" bore standard
wheels. With 1/4" collet chuck, chuck wrench, 2-1/2" wheel
guard, two wheel collars, one general purpose wheel and 8
ft cord with 3-prong plug.
• 1/4" collet type chuck
• 1-1/4" standard, 2" high speed and 3" reinforced wheel
• Net weight of 7 lb 10 oz – shipping weight 9-1/2 lb
• Major 3-3/8" diameter
• 115V, AC/DC power source
Mfg. No.
9-011
9-111
• Sales specialists on call
Benefits to suppliers:
1/4 HP
Order No.
5029.01136
5029.01139
• 24-hour-a-day, seven-day-a-week service
Handle
Spade
Straight
Length (in)
15-5/8
16-3/4
• Member purchase support and loyalty
• National contract opportunities
• Network of key distributors
• Preservation of brand identity
It truly is a
win-win-win situation.
739
ELECTRIC POWER TOOLS
Flexible Shaft Machines
For Precise or Intricate Hand Grinding, Deburring, Drilling,
Polishing, Buffing, or Sanding on Metals, Plastics, and
Other Materials
Flexible Shaft Machines with
Handpiece and Foot Control
Drill Press Stand
• Converts your flexible shaft power tool
into a drill press
• Adjustable table for large workpieces
• For use with Nos. 30® and 44T hand
pieces and shaft machines
• Base is 3-3/4 in. x 3-1/2 in.
• Stroke Length is 1-1/4 in.
SERIES CC®
• 1/10 HP universal ball bearing
• Electronic foot control in plastic housing
• No. 30® Jacobs chuck-style ball bearing
handpiece
Model # CC-FCT-30
Order No.
5029.01300
SERIES MM
• CC motor in heavy cast iron base.
• Built-in solid state electronic dial
control
• Same motor, handpiece, and shaft
and sheath as CC-FCT-30
50
Model # MM-30
SERIES S
• 1/8 HP universal, ball bearing
• 25% more power than SERIES CC
• Electronic foot control FCT-1
• No. 30® Jacobs chuck-style ball bearing handpiece
Model # S-FCT-40
Model # DP30
Height Table Post
Throat
Mfg. No. (in)
(sq.) Dia. (in) (in)
DP30
14-1/4 3-5/16 3/4
2
Shipping
Wt. (lb)
9
Maintenance Supplies
Order No.
5029.01303
5029.01306
5029.01309
5029.01312
5029.01315
5029.01318
5029.01321
5029.01324
Mfg. No.
93
77
119P
2019P
2019P
10823
10802A
10006
Description
Inner Sheath
Outer Sheath
Motor Brushes - Pair
Motor Brushes - Pair
Motor Brushes - Pair
Inner Sheath
Outer Sheath
Flexible Sheath Grease - 1 oz.
For Series
CC, MM, S Motors
CC, MM, S Motors
CC, MM, Motors
S Motors
H Motors
H Motors
H Motors
All Motors
MC2 Micro Chuck
• Used for 60-80 wire gauge drills in drill press or handpiece (Can be used in Nos. 8 and 44T handpieces)
Order No.
5060.00001
Mfg. No.
DP30
Shank (in)
1/8
Collet Sets for Handpieces
SERIES H
• Constant level of oil in a pump bearing
housing, gear box, or other wet sump
applications
• Heavy-duty 1/4 HP universal,
ball bearing
• Electronic foot control in metal housing
• No. 44HT tapered handpiece
#440
#600
Model # H-SCH-44HT
Order No.
5060.00004
740
Order No.
5029.01327
5029.01330
5029.01333
5029.01336
Mfg. No.
CC-FCT-30
MM-30
S-FCT-40
H-SCH-44HT
Style
Hang-up
Bench mounted
Hang-up
Hang-up
rpm
18,000
18,000
18,000
20,000
5060.00007
Mfg. No. Description
440
Set of 7 Collets for Handpieces Nos. 44T & 44HT
Includes: 1/16 in., 3/32 in., 3 mm, 1/8 in. 5/32 in,
6 mm and 1/4 in.
600
Set of 4 Collets for No. 8 Handpiece
Includes: 1/32 in., 1/16 in., 3/32 in., and 1/8 in.
Metric 3mm also available as an extra
ELECTRIC POWER TOOLS
Interchangeable Handpieces
Complete Kits with Motor, Control,
Handpiece and Accessories
Foredom’s premier industrial kit for jobs requiring a heavy
duty motor with higher torque.
Model # 2590
Includes:
• SCT Control
• HK25 Accessory Kit
• Flexible Shaft Grease and
Spare Motor Brushes
No. 28 Newest tapered grip handpiece is ideal for fine,
detailed work. Comes with 3/32" and 1/8" collets, pin and
wrench. Maintenance-free prelubricated ball bearings.
No. 30® Foredom’s most popular handpiece with geared
3-jaw Jacobs® chuck. Capacity up to 5/32". Prelubricated
ball bearings require no maintenance. Complete with chuck
key.
Foredom’s two industrial kits for all types of finishing
operations
No.44T Tapered grip handpiece with collet-type chuck
adaptable to larger shank accessories. Complete with
3/32", 1/8" and 1/4" collets, pin & wrench. Prelubricated
ball bearings require no maintenance. For maximum utility
purchase with Collet Set 400.
44T
30 ®
Series H Handpieces
Models #2272 and #2275 Include:
• FCT Control
• No. 20 Accessory Kit
• Flexible Shaft Grease
Order No.
5029.01339
5029.01342
5029.01345
Mfg. No.
2590
2272
2275
hp Motor
H-1/4
S-1/8
S-1/8
No. 25H Comes with 1/8" and 1/4" collets.
Handpiece
44HT
30®
44T
Speed Controls
SCH-1
Foot
Controls
50
Model # 2275
Model # 2272
Manual
Control
No. 30H Geared 3-jaw chuck accommodates accessory
shank sizes up to 5/32".
Permanently lubricated shielded ball bearings.
Complete with chuck key.
For use only with Series H machines.
FCT-1
EM-1
CFL-15
Order No.
5029.01348
5029.01351
5029.01354
5029.01357
5029.01360
5029.01363
5029.01366
5029.01369
5029.01372
Mfg. No.
FCT-1
FCH-1
FCH-2
SCT-1
SCH-1
SCH-2
CFL-15
EM-1
EMH-1
Description
Electronic – heavy-duty plastic housing
Electronic – plastic housing extra wide design
Electronic – same as FCH-1 with 220/240 V
Electronic – metal housing
Electronic – cast iron housing
Electronic – same as SCH-1 with 220/240 V
Carbon pile – metal housing
Electronic – plastic housing
Electronic – same as EM-1 with 220/240 V
No. 44HT Collet-type handpiece similar to No. 30H.
Complete with 1/8" and 1/4" collets, pin & wrench.
For maximum utility purchase with Collet Set 400.
For use only with Series H machines.
Order No.
5029.01375
5029.01378
5029.01381
5029.01384
5029.01387
5029.01390
Mfg. No.
28
30®
44T
25H
30H
44HT
Dia. (in)
1/2 (grip)
1
1
1-1/32
1
1
Length (in)
5-3/8
5-3/16
5-3/8
6-1/8
5-3/4
6-1/4
Weight (oz)
4-1/4
6
7
10
8
9-1/2
All Electric Items are C.S.A. approved.
741
ELECTRIC POWER TOOLS
Accessories For
Nos. 141, 161 Geared Threaders
Allows power drives and threading machines to thread up
to 4" and 6" pipe.
Power Threader/Model 700
All-spur reduction gear
head, spring loaded
adapter pawl – hardened
steel spindle gear. Use the
No. 775 support arm for
easy operation. When
threading 1" or larger
material.
• Heavy-duty hand-held power drive
• Features reversible universal 1/2 HP
• 1/8"–2" pipe threading capacity
• Designed for Ridgid No. 12R die
heads – other Ridgid
die heads (OOR, OORB, 11R) using
adapters, threading 2-1/2" through 6"
with 141/161 geared threaders
• UL listed and CSA approved
• Double-throw reversible switch
• Cast aluminum body
MODEL 700
50
A telescoping (41" to 50") drive shaft for operation of Nos.
141 and 161 geared threaders with threading machines.
Optional Carrying Case
42950
Order No.
5029.01400
5029.01403
Mfg. No.
41935
41940
Order No.
ACCESSORIES
5099.00001
5099.00004
5099.00007
5099.00010
5099.00013
5099.00016
5099.00019
Mfg. No.
Model
Description
42600
42605
42610
42615
42620
42625
42950
770
771
772
773
774
775
B-171-X
Adapter for OO-R and OO-RB
Adapter for O-R
Adapter for 11-R
Adapter for 111-R
Square drive adapter
Support arm for No. 700
Metal carrying case
Maximum
Geared Thread
Capacity (in)
6
6
Power
Ratings
115V 25-60Hz
230V 25-60Hz
Nos. 141/161
Geared Threaders
• 141 threads 2-1/2", 3", 3-1/2", 4"
pipe with one set of dies
• 161 threads 4", 4-1/2", 5", 6" pipe
with one set of dies
• Jaw clutch prevents jamming
• Simple adjustment for tapered or
straight threads
• Cam-type workholder sets instantly
• Fully enclosed gearing
• Right-hand only
D1440 Ratchet Handle
For use with Nos. 141, 161
geared threaders.
Pipe Size
Cap. (in) Description
2-1/2–4 NPT with 1 set
high-speed dies
5099.00025
36630
161
4–6
NPT with 1 set
high-speed dies
5099.00028
96725
—
—
Metal carrying case for
141 geared threaders
5099.00031
41620
—
—
Gearhead motor grease
*Note: threaders are shipped and priced without ratchet and handle
5099.00034
39380
D-1440
Ratchet handle
742
Mfg. No.
36620
Model
141
No. 844 Drive Bar
No. 840A Universal Drive Shaft
Rod
Threading
Cap. (in)
1/4–1
1/4–1
Order No.
5099.00022
No. 758 Loop
No. 346 Support Arms
Order No.
5099.00037
5099.00040
5099.00043
5099.00046
5099.00049
Mfg. No.
40005
19366
42415
42405
61122
Model
346
758
768
844
840A
Description
Support arms (300)
Loop (300)
Drive link assembly (535)
Drive bar (300, 535)
Universal drive shaft
Pipe Dies for 141 Geared
Pipe Threaders – NPT
Order No.
5099.00052
5099.00055
5099.00058
Mfg. No.
38120
70640
38130
Alloy
RH HS
RH HS for SS
RH HS for PVC
Size (in)
2-1/2 thru 4–8 TPI
2-1/2 thru 4–8 TPI
2-1/2 thru 4–8 TPI
NPSM—use NPT dies and rotate threader guide post 180°
BSPP—use BSPT dies and rotate threader guide post 180°
Pipe Dies for 161 Geared
Pipe Threaders – NPT
Order No.
5099.00061
5099.00064
Mfg. No.
38155
70655
Alloy
RH HS
RH HS for SS
Size (in)
4 thru 6–8 TPI
4 thru 6–8 TPI
NPSM—use NPT dies and rotate threader guide post 180°
BSPP—use BSPT dies and rotate threader guide post 180°
Model 300 Power Drive
Includes a 1/2 HP universal
reversible, single-phase, 2560 Hz, 115V motor (230V
available), a heavy-duty
For/Off/Rev integral
safety foot switch, and
a Ridgid speed chuck
with replaceable rockeraction jaws. Threading capacity is 1/8"–2" for pipe with 141
and 161 geared threaders, 1/4"–2" for rod. Spindle speed
is 38 RPM (57 RPM available). Cam-action rear centering
device turns with chuck.
Model 300 Power Drive Complete Includes:
•
•
•
•
•
•
300 power drive
1206 stand
311 carriage with lever
341 reamer
360 cutter
811A universal die head
Order No.
5029.01406
5029.01409
Mfg. No.
15682
41855
• Set 1/2"–3/4" universal
alloy dies; set 1"–2" universal alloy dies
• 318 oiler
• 1 gallon Nu-Clear thread
cutting oil
Model
300 complete
300 only
Description
115V, 25-60 Hz (NPT)
115V, 25-60 Hz
ELECTRIC POWER TOOLS
Model 300 Compact
Threading Machine
Complete Model 300
Convert your 300 power drive
into a low-cost threading
machine. With these low-cost
accessories and have the
speed and convenience of a
threading machine.
• Die heads and dies for use
with 300 power drive with 311
carriage
• No. 360 cutter – 1/8"–2" pipe
capacity, 1/4"–7/8" rod capacity with F-3 wheel, 5/16"–1"
with E-1032 cutter wheel
• No. 341 reamer – positive-locking 5-flute cone, right hand
1/8"–2" (special E863 RH/LH combination reamer cone available)
• No. 311 carriage with lever
• No. 1206 stand
• No. 1452 clip-on tool tray
• No. 418 oiler
• No. 819 nipple chuck
• No. 32 transporter
• No. 304 retrofit kit – converts 300 power drive to automatic
oiling using gear head assembly with oil pump, oil pan
assembly, oil spout, support bar, necessary connectors
and 1 gal. of Nu-Clear thread cutting oil
Order No.
5029.01412
5029.01415
5029.01418
Mfg. No.
42360
83540
42575
Model
1206
1206
32
5029.01421
5029.01424
5029.01427
68815
42385
42365
311
312
341
5029.01430
5029.01433
5029.01436
5029.01439
5029.01442
5029.01445
42370
42380
97345
97350
97365
46660
360
1452
304
304
—
E-863
Description
Stand for 300 power drive
Stand for 300 power drive export
Transporter (for power drives and
tri-stand vises)
Carriage with No. 312 lever
Carriage feed lever
Reamer for No. 311 carriage
with lever
Cutter for No. 311 carriage
Clip-on tool tray
Retrofit kit (38 RPM)
Retrofit kit (57 RPM)
Jaw inserts for coated pipe
LH/RH reamer cone
Same popular features as
the Model 300. A hammertype chuck comes with
replaceable rocker-action
jaw inserts. The oiling system is through-the-head,
with integral oil reservoir –
self-priming, constant-flow,
gerotor pump. The cutter is a Model 360, roll-type cutoff,
self-centering, full-floating and the reamer is a Model 344,
1/8"–2", five flute cone, right hand only.
• No. 811A quick-opening die head
• No. 344 reamer
• No. 360 cutter with E-1032 cutter wheel
• 1/2"–3/4" alloy universal die set
• 1"–2" alloy universal die set
• 1 gal. Nu-Clear threading cutting oil
Order No.
MACHINES
5029.01500
5029.01503
Mfg. No.
Model
Description
66947
67182
300
300
Compact threading machine
Compact kit (includes Model 250
folding wheel stand)
DIE HEADS
5029.01506
5029.01509
5029.01512
97075
97065
97045
815A
811A
531
5029.01515
97050
532
1/8"–2" NPT, self-opening, RH
1/8"–2" NPT, quick-opening, RH
1/4"–1" bolt, quick-opening,
RH/LH
1-1/4"–2" bolt, quick-opening,
RH/LH
STANDS
5029.01518
67657
ACCESSORIES
5029.01521
67662
5029.01524
51005
250
Folding wheel stand
—
916 groover adapter bracket
(for 300 power drive
version of 916)
Nipple chuck, 1/2"–2" NPT
819
50
Oilers
• Hand-operated, easy pumping 2-finger
trigger
• No. 418 is portable, large pan catches
oil/chip run-off
• Oil is double-filtered and recirculated
through reservoir
• Chip pan 14-1/2" diameter, 8-1/2" deep,
hose length 54"
Order No.
2049.00001
Mfg. No.
72337
2049.00004
72342
2049.00007
2049.00010
72332
72327
418
Model Description
418
Hand operated oiler complete, includes
1 gal. thread cutting oil, bucket with
removable chip tray and 54" hose
402
Hand operated oiler with attachment for
1 gal. and 5 gal. containers and 54" hose
#4
Hand operated oiler only
#4
Hand operated oiler with 54" hose
and hose fittings
743
ELECTRIC POWER TOOLS
Model 1215
Threading Machine
Model 535 Threading Machine
Standard equipment
includes threading
machine with foot switch,
universal quick opening
die head, reamer, cutter,
set 1/2"–3/4" universal
alloy dies, set 1"–2" universal alloy dies, 1 gallon Nu-Clear oil, 4 hex wrenches, 1
spare cutter wheel, 1 tube lubricating grease.
• Automatic through die head oiling
• Speed chuck with rocker-action jaws centers and grips
workpiece instantly
• Can be used with geared threaders
• Suited to a wide variety of quick and self-opening die heads
• Length gauge for quick, accurate cut-off
• Integral foot switch for safe operation
• Self priming oil pump
Technical Specifications
50
• Pipe capacity: 1/8"–2", 2-1/2"–4", 4"–6" with 141 and 161
geared threaders
• Bolt capacity: 1/4"–2"
• 1/2 HP, single-phase, 115V, 25-60 Hz, reversible
universal motor – 230V 25-60Hz model available
• For/Off/Rev integral safety foot switch
• Ridgid speed chuck with replaceable rocker-action jaw
inserts (3)
• Cam-action, turns with chuck rear centering device
• Self-centering, full-floating cutters
• Two model cutters available (standard – No. 820 wheel-type
with 1/8"–2" pipe capacity and 1/4"–1" bolt capacity,
optional – No. 821 blade-type with 1/2"–2" pipe capacity)
• 5-flute cone, RH, 1/8"–2" reamer – RH/LH combination
reamer available
• Adjustable self-priming gerotor oil pump
Order No.
Mfg. No. Model
Cutter
RPM
Volt
1/2"–2" NPT STANDARD MACHINES
5029.01600
41910
535
820
36
115V
5029.01603
41915*
535
820
36
115V
*Machine only – includes standard equipment less all die heads and dies
54 RPM model also available.
Note: Available stands see 1224 machine stands.
Model 535 Machine Accessories
Order No.
Mfg. No. Model
Description
MACHINE ACCESSORIES
5029.01427
42365
341
Reamer
5099.00100
42390
820
Wheel-type cutter
5099.00103
42395
821
Blade-type cutter
5029.01442
97365
—
Jaw inserts for coated pipe
5099.001
58007
—
Machine stand adapter bracket*
*58007 adapter kit required to attach pre-1996 Model 535 to stands
5099.00106
42415
768
Drive link assembly
5099.00109
42405
844
Drive bar
5099.00112
51005
819
Nipple chuck complete 1/2"–2"
5099.00115
41620
—
Gearhead motor grease
744
Standard equipment
includes No. 811A quick
opening die head, one set
1/2"–3/4" universal alloy
NPT dies, one set 1"–11/2" universal alloy NPT
dies, No. 344 five fluted
reamer 1/4"–1-1/2", No.
732 cutter with cutter
wheel and one gallon Nu-Clear oil. Accessories include
Model 1203 mounting stand, Model 531 1/4"–1" bolt die
head and Model 1219 nipple chuck 1/2"–1-1/2".
• Pipe capacity: 1/4"–1-1/2"
• Bolt capacity: 5/16"–1"
• 1/2 HP universal motor; On/off heavy-duty switch and
integral foot switch motor control
• 44 RPM right hand operation spindle speed
• Hammer type with replaceable rocker action jaw inserts
front chuck
• Cam action rear centering device
• Model 732 cutter
• Model 344, 1/4–1-1/2" reamer
• Through die head adjustable oiling
• Self-priming constant flow, gerotor type pump
Order No.
5029.01606
5029.01609
5029.01612
5029.01615
5029.01512
Mfg. No.
61142
61187
62457
62462
97045
Model
1215
1203
1219
1219
531
Description
1/2"–1-1/2" NPT, 115V, 60Hz
Tripod stand
Nipple chuck, NPT
Nipple chuck, BSPT
Bolt die head 1/4"–1"
Power Threader Model 1224
Pipe capacity of 1/4"–4", 4"–6"
with 161 geared threader, bolt
capacity is 1/4"–2". Threads
1/4"–2" pipe at 36 RPM and 21/2"–4" at 12 RPM. The 1224
threads a wide range of pipe
including black, galvanized and
plastic-coated pipe, together
with stainless steel, IMC and
heavy-wall conduit, as well as
rod up to 30 Rockwell C.
Standard Equipment:
• Model 1224 threading
machine with foot switch
• No. 714 (914) 2-1/2"–4"
receding self-opening die
head
• No. 711 (911) 1/4"–2" selfopening die head
• 1/2"–3/4" alloy die set
• 1"–2" alloy die set
Order No.
5099.00118
5099.00121
5099.00124
Mfg. No.
26092
26097
31442
Model
1224
1224
1224
• 2-1/2"–4" 1224 high speed
die set
• 1 gallon Nu-Clear oil
• 3 hex keys
• 1 spare F-229 cutter wheel
• 3/4" combination wrench
• Tool box
• No. 744 reamer
• No. 764 cutter
Description
1/2"–4" NPT 120V 60 Hz
1/2"–4" NPT 240V 60 Hz
1/2"–4" NPT 220V 50 Hz
ELECTRIC POWER TOOLS
Stands For 535 & 1224 Machines
Pipe Dies
Three stands are available to satisfy every
operational requirement.
Pipe dies for use in universal die heads
Nos. 504A, 711, 713, 811A, 815Aand 842.
100
Order No.
5099.00127
5099.00130
5099.00133
150
Mfg. No.
68212
68217
68222
Model
100
150
200
200
Description
Universal leg and tray stand
Universal wheel and tray stand
Universal wheel and cabinet stand
Die Heads For 2" Threading Machines
For use on 500, 500A, 535 800, 801, 802, 1822 machines,
300 and 300-A machines with carriage.
815A Self Opening Die Head
• Self opening (SO) is a trigger foot
automatically retracted die when
thread length is cut.
811A Quick Opening Die Head
• Quick-opening (QO) is a manually
flipped throwout lever to retract dies
when thread length is cut.
532 Bolt Die Head
• Oil through head
• No. 811A die head replaces the
No. 811 and No. 841 die heads
• No. 815A die head replaces the
No. 815 and No. 845 die heads
Order No.
Mfg. No. Model
MACHINE NPT DIE HEADS
5029.01505 97065 811A
5029.01506 97075 815A
5239.01507 23282 842
MACHINE BOLT DIE HEADS
5029.01512 97045 531
5029.01515 97050 532
Dies
Cap. (in)
Description
Universal 1/4–2
Universal 1/4–2
Universal 1/4–2
RH Quick Opening
RH Self Opening
LH Self Opening
500B
500B
RH/LH Quick Opening
RH/LH Quick Opening
1/4–1
1-1/8–2
Order No.
Mfg. No. Taper
ALLOY
1599.00200
47735
NPT
1599.00203
47825
NPSM
1599.00206
47740
NPT
1599.00209
47830
NPSM
1599.00212
47795
NPT
1599.00215
47745
NPT
1599.00218
47835
NPSM
1599.00221
47800
NPT
1599.00224
47750
NPT
1599.00227
47840
NPSM
1599.00230
47805
NPT
HIGH SPEED
1599.00233
47755
NPT
1599.00236
47845
NPSM
1599.00239
39587
NPT
1599.00242
47760
NPT
1599.00245
47850
NPSM
1599.00248
47810
NPT
1599.00251
47765
NPT
1599.00254
47855
NPSM
1599.00257
47815
NPT
1599.00260
47770
NPT
1599.00263
47860
NPSM
1599.00266
47820
NPT
1599.00269
70775
NPSM
HIGH SPEED FOR STAINLESS STEEL
1599.00272
47775
NPT
1599.00275
47780
NPT
1599.00278
47785
NPT
1599.00281
47790
NPT
Alloy
Pipe Size (in)
RH
RH
RH
RH
LH
RH
RH
LH
RH
RH
LH
1/8–27 TPI
1/8–27 TPI
1/4–3/8–18 TPI
1/4–3/8–18 TPI
1/4–3/8–18 TPI
1/2–3/4–14 TPI
1/2–3/4–14 TPI
1/2–3/4–14 TPI
1–2–11-1/2 TPI
1–2–11-1/2 TPI
1–2–11-1/2 TPI
RH
RH
LH
RH
RH
LH
RH
RH
LH
RH
RH
LH
LH
1/8–27 TPI
1/8–27 TPI
1/8–27 TPI
1/4–3/8–18 TPI
1/4–3/8–18 TPI
1/4–3/8–18 TPI
1/2–3/4–14 TPI
1/2–3/4–14 TPI
1/2–3/4–14 TPI
1–2–11-1/2 TPI
1–2–11-1/2 TPI
1–2–11-1/2 TPI
1–2–11-1/2 TPI
RH
RH
RH
RH
1/8–27 TPI
1/4–3/8–18 TPI
1/2–3/4–14 TPI
1–2–11-1/2 TPI
50
Bolt Dies
For Universal Die Heads Nos. 504A, 711, 713, 811A, 815A and 842
UNC – RH – ALLOY
Order No.
Mfg. No.
1599.00010
47985
1599.00013
47990
1599.00016
47995
1599.00019
48000
1599.00022
48005
1599.00025
48010
1599.00028
48015
1599.00031
48020
1599.00034
48025
1599.00037
48030
1599.00040
48035
1599.00043
48040
1599.00046
48045
1599.00049
48050
1599.00051
48055
1599.00054
48060
RH - HIGH SPEED
Order No.
Mfg. No.
1599.00110
48215
1599.00113
48220
1599.00116
48225
1599.00119
48230
1599.00122
48235
1599.00125
48240
1599.00128
48245
1599.00131
48250
1599.00134
48255
1599.00137
48260
1599.00140
48265
1599.00143
48270
1599.00146
48275
1599.00149
48280
1599.00151
48285
1599.00154
48290
Nominal Rod
Dia. (in)
1/4–20 TPI
5/16–18 TPI
3/8–16 TPI
7/16–14 TPI
1/2–13 TPI
9/16–12 TPI
5/8–11 TPI
3/4–10 TPI
7/8–9 TPI
1–8 TPI
1-1/8–7 TPI
1-1/4–7 TPI
1-3/8–6 TPI
1-1/2–6 TPI
1-3/4–5 TPI
2–4-1/2 TPI
UNF – RH – ALLOY
Order No.
Mfg. No.
1599.00300
48065
1599.00303
48070
1599.00306
48075
1599.00309
48080
1599.00312
48085
1599.00315
48090
1599.00318
48095
1599.00321
48100
1599.00324
48105
1599.00327
48110
1599.00330
48145
1599.00333
48115
1599.00336
48120
1599.00339
48125
1599.00342
48130
RH - HIGH SPEED
Order No.
Mfg. No.
1599.00400
48295
1599.00403
48300
1599.00406
48305
1599.00409
48310
1599.00412
48315
1599.00415
48320
1599.00418
48325
1599.00421
48330
1599.00424
48335
1599.00427
48340
1599.00430
48345
1599.00433
48350
1599.00436
48355
1599.00439
48360
1599.00442
48365
Nominal Rod
Dia. (in)
1/4–28 TPI
5/16–24 TPI
3/8–24 TPI
7/16–20 TPI
1/2–20 TPI
9/16–18 TPI
5/8–18 TPI
3/4–16 TPI
7/8–14 TPI
1–14NS TPI
1–12 TPI
1-1/8–12 TPI
1-1/4–12 TPI
1-3/8–12 TPI
1-1/2–12 TPI
745
ELECTRIC POWER TOOLS
Model 258/258XL Pipe Cutter
819 Nipple Chuck Kit
• Holds short or close nipples for
threading
• Holds studs for threading
• For use with 300 power drive,
535 and 1822 (with adapter kit)
and 1224 threading machines
• Standard nipple chuck includes
insert and 5 adapters: 1/2", 3/4", 1", 1-1/4" and 1-1/2"
(nipple chuck body serves as 2" adapter)
Order No.
1599.00500
1599.00503
1599.00506
1599.00509
1599.00512
Mfg. No.
51005
51020
35867
62457
62462
Model
819
D-380-X
839
1219
1219
Description
NPT nipple chuck 1/2"–2"
Nipple chuck wrench
Adapter kit for 1822 machine
NPT nipple chuck for 1215
BSPT nipple chuck for 1215
PIPE FABRICATION
Model 918
Hydraulic Roll Groover
50
Features a powerful 15 ton
hydraulic ram in a compact,
easy to transport unit. The 918
is the ideal groover for job-site
requirements. The 918 adapts
quickly to Ridgid 300 power
drive, 535, 1822 or 1224
threading machines. Designed to provide maximum versatility, the 918 is capable of grooving up to 12" schedule 10
and 8" schedule 40 standard wall pipes.
Standard Equipment: 2"–6" schedule 10/40 roll set, 8"–12"
schedule 10 (8" schedule 40) roll set, tools for roll set
change and a carry case for roll sets.
Capacity:
• 1"–12" schedule 10 steel
• 1"–8" schedule 40 steel
• 2"–6" copper (types K, L,M, DWV)
• 2"–6" schedule 80 PVC
Order No.
5029.01620
Mfg. No.
48297
5029.01623
48292
5029.01626
48392
5029.01629
48397
5029.01632
48402
918 ACCESSORIES
5029.01635
48405
5029.01638
48407
746
5029.01641
48412
5029.01644
5029.01647
48417
59992
5029.01650
5029.01653
5029.01656
5029.01659
49662
50272
76822
76827
Model
918-1
911
912
914
915
Description
918 roll groover with 300 power
drive mount kit
300 power drive mount kit only
1822 carriage mount kit only
1224 carriage mount kit only
535 carriage mount kit only
Roll set for 8" schedule 40, tool box included
Roll set for 1-1/4" to 1-1/2" schedule 10/40
(Tool box includes drive shaft, bolt and tools)
Roll set for 1" schedule 10/40 and 1-1/4" to
1-1/2" (Sch. 10/40, tool box includes drive
shaft, bolt and tools)
Roll set for copper (2"–6")
1"–12" stabilizer for grooving nipples
(For 918 with 300 mounting kit or 918-I)
Tool box
Ridgid hydraulic oil
English diameter tape
Metric diameter tape
Cuts 2-1/2" to 8" schedule 10*/40
steel pipe, galvanized pipe, rigid
conduit, etc. at the job site or in the
shop. Powered by the Ridgid No.
700 power drive, the
258 is a displacement
cutter that provides
square cuts. The
Ridgid 258XL offers
8"–12" diameter pipe
cutting capacity.;
enabling larger diameter pipe to be cut to length. The 258XL also uses the Ridgid
700 power drive to rotate the heavy-duty cutter wheel.
• Ridgid 774 square drive adapter
• 8-1/2" HD cutter wheel assembly
• Hydraulic ram and foot pump
• Two 2-1/2" to 12" ball transfer pipe supports
• 33 RPM on No. 700 (no load)
• Model 258 cutting capacity is 2-1/2" to 8" schedule 10*/40
steel pipe – weight without No. 700 power drive is 105 lb
• Model 258XL cutting capacity is 8"–12" schedule 10*/40
steel pipe – weight without No. 700 power drive is 140 lb
Order No.
Mfg. No. Model
Description
5099.00127
50767
258
2-1/2"–8" pipe cutter
5099.00130
50227
258-XL
8"–12" pipe cutter
Note: 700 power drive not included.
Note: Models 258 and 258XL are not recommended to cut cast iron pipe.
ACCESSORIES
5099.00133
66687
—
8-1/2" HD cutter wheel assembly
(includes HD cutter wheel, hub with pins, cover plate)
5099.00136
50812
E-258
8-1/2" HD cutter wheel only
5099.00139
58222
E258-T
8-1/2" thin wall cutter wheel only
5099.00142
54397
—
Transport cart
5099.00145
60002
258PS
Pipe support 2-1/2"–12"
5099.00148
60007
258PS
Replacement ball transfer head set
5099.00151
61757
—
Pipe roller for beveling
(for Model 258 only)
Model HC-300 Hole Cutting Tool
Designed to cut holes up to 3" diameter into steel pipe. The multiple hole
size allows the use Mechanical T’s®,
Hookers®, Vic-O-Lets™, Weld-O-Let™
and other fittings for branching unpressurized pipelines. Features a 1/2"
capacity chuck to
accommodate all size of
holes up to 3" diameter and
standard hole saw arbors up
to 7/16" hex (1/2" chuck size). An integral motor and gear
reduction optimizes the performance and saw life in the
capacity range. A single feed handle and on/off switch
allows for easy operation. The compact two-piece design
allows the HC-300 to be used in tight quarters and difficultto-reach locations.
Order No.
Mfg. No. Model
Description
5029.01662
76777
HC-300
3" hole cutting tool 115V
5029.01665
83672
R-300
Solid shank arbor
5029.01668
84472
—
HC-450/HC-300 carrying case
Note: HC-300 is not a hot tapping tool.
Use the R-300 arbor when drilling 1-1/4" and larger holes
ELECTRIC POWER TOOLS
Model K-60SP
For 1-1/4" To 4" Drain Lines
Model K-39 Drain Cleaners
3/4" To 2-1/2" Capacity
Excellent for small line cleaning.
Opens clogged lavatory, sink lines,
Slide action chuck
urinals and tub/shower drains. Best
to use 5/16" cables for 3/4" to 1-1/2"
lines and 3/8" cables for 1-1/4" to 21/4" lines.
• 3 styles – slide action chuck, powAutofeed and
erfeed and 3 jaw chuck
slide action chuck
• Autofeed keeps hands off cable
• Variable speed 1/2" ball bearing
power unit rotates cable 0-500
RPMs
• Two piece twist lock canister with
3 jaw chuck
interchangeable inner drum
• Drum capacity – 50 ft of 5/16" or 35 ft of 3/8"
• CSA approved
Order No.
5029.01700
5029.01703
Mfg. No.
68057
68097
5029.01706
5029.01709
68067
68107
Model
Volts
K-39
115V
K-39
230V
Machine with C-1IC, 5/16" x 25 ft inner core
cable with inner drum
K-39-5
115V
K-39-5
230V
Machine with C-1IC – 5/16" x 25 ft inner core
cable with inner drum, C-6 – 3/8" x 35 ft cable
with inner drum, T-250 – five-piece tool set
for 3/8" cable, C-6429 carrying case
Model K-50 Drain Cleaner
For 3/4" to 4" Drain Lines
Capable of running three different
size cables: 5/16", 3/8" and 5/8".
• Pull handle down and cable
spins at 400 RPM – release
handle, cable stops instantly
• Uses sections of 5/8" cable,
cleans up to 100 ft (C-8 best for
1-1/4–3" drains, C-9 best for
2–4" drains)
• Equipped with an A-17 adapter, runs up to 50 ft of 5/16"
(best for 3/4" to 1-1/2" lines) or 35 ft of 3/8" (best for 11/4" to 2" lines) continuous length cable
• 1/6 HP motor – 115V models CSA approved
Order No.
5029.01712
5029.01715
5029.01718
5029.01721
5029.01724
Mfg. No.
58920
76455
58960
76475
58980
Model
K-50
K-50
K-50-4
K-50-4
K-50-6
Volt
115V
230V
115V
230V
115V
5029.01727
76485
K-50-6
230V
5029.01730
59000
K-50-8
115V
5029.01733
76495
K-50-8
230V
5029.01736
52972
K-50-9
115V
Description
Machine only
Machine only
K-50 with A-30 cable kit
K-50 with A-30 cable kit
K-50 with A-17-A adapter,
A-30 cable kit
K-50 with A-17-A adapter,
A-30 cable kit
K-50 with A-17-A adapter,
A-17-B adapter, A-30 cable kit
K-50 with A-17-A adapter,
A-17-B adapter, A-30 cable kit
K-50 with A-40 cable kit
Compact, for institutional,
commercial or residential
cleaning. Ideal for septic
tank and vacuum truck.
• Handle allows for easy
transporting
• Instant-acting cable clutch
• Unit spins both 7/8" (C-10
cleans 2" to 4" lines
through 150 ft) and 5/8" (C-7, C-8, C-9 cleans 1-1/4" to 4"
lines through 125 ft) dia. cable
• Equipped with 1/2 HP motor; CSA approved
• Call for accessories
Order No.
Mfg. No. Model
Volt
5029.01739
66497
K-60SP-SE
115V
5029.01742
66517
K-60SP-SE
220/240V
Machine with A-1 operator’s mit, A-12 pin key and A-60-12 rear guide
hose, plus A-61 tool kit, A-62 cable kit
Model K-750
For 3" To 10" Drain/Sewer Lines
Powerful, self-contained machine ideal for lateral lines. Powerfeed automatically advances,
retrieves cable up to 20 ft per minute.
• Adjusts for either 5/8" (recommended
for 3" to 6" drain lines up to 200 ft) or
3/4" (recommended for 4" to 10" drain
lines up to 200 ft) cable
• Tough, corrosion-resistant cable
drum; holds 100 ft of 3/4" or 125 ft
of 5/8" cable
• Cable spins at 200 RPM
• 1/2 HP induction motor – 115V models CSA approved
• Call for accessories
Order No.
5029.01747
50
Mfg. No. Model
Volts
47047
K-750 with C-24 115V-60Hz
Machine with one pair of gloves, powerfeed,
standard 5/8" tool set and C-24, 100 ft 5/8" cable
Model K-1500B Drain Cleaner
For 2" To 8" Drain / Sewer Lines
The finest all-around sewer and
drain cleaning machine.
• Instant-acting cable clutch •
cable spins constant 710 RPM
• Low-profile ‘B’ frame design
• Equipped to run easy-to-handle
15 ft sections of 1-1/4" cable to
clean 3" to 8" lines to 200 ft
• Easy clutch jaw change-out adapts K-1500 to run 15 ft
sections of 7/8" cable through 2" to 4" lines up to 175 ft
• 3/4 HP motor – 115V models CSA approved
• Call for accessories
Order No.
Mfg. No. Model
Volt
5029.01750
23717
K-1500B
115V-60Hz
5029.01753
27597
K-1500B
230V-50Hz
5029.01756
27637
K-1500B
240V-50Hz
Machine with A-1 mit, A-12 pin key and A-34-12 rear guide hose, plus
seven sections 1-1/4" C-11 cable (total 105 ft), two A-8 cable carriers,
nine-piece 1-1/4" tool set
747
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement