Delfield N6-1313-36 General Manual

Project ___________________________________
Item _____________________________________
by Delfield
Quantity _ ________________________________
N6/N10/N14
CSI Section 11400
Approved _ _______________________________
Date _____________________________________
Free-Standing Self-Contained Milk Or Beverage Dispensers
Models
• N6-1313-34
6 crate capacity, 34” height
• N10-1313-36
10 crate capacity, 36” height
• N6-1313-36
6 crate capacity, 36” height
• N14-1313-34
14 crate capacity, 34” height
• N10-1313-34
10 crate capacity, 34” height
• N14-1313-36
14 crate capacity, 36” height
Standard Features
Options &
Accessories
•
•
•
•
•
•
N10-1313-36
•
(shown with optional casters)
•
•
•
•
•
Cabinet top and corners to be 16-gauge
stainless steel
1” IPS drain
Units insulated with foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane
Units to have sliding stainless steel lids with
recessed handle
Self-leveling mechanisms shall be
adjustable by adding and removing
stainless steel extension springs located
inside the elevator housing
Dispenser platform carrier shall be 18gauge stainless steel and removable for
cleaning
6” adjustable stainless steel legs
Refrigeration system shall be HFC-134A
refrigerant
Expansion valve and pressure control
9’ cord and plug
One year parts and 90 day labor standard
warranty
•
•
•
•
4.00” (10cm) diameter swivel casters
(two locking) with corner bumpers
(adds 1.75” [4cm] to overall length
and depth and reduces overall
height by 1.00” [3cm])
Wrap-around bumpers (adds 1.75”
[4cm] to overall length and depth)
Lid locking device
Special voltages
Dial or digital style thermometer
Specifications
Exterior sides shall be 22-gauge stainless steel. Top and corner
gauge stainless steel.
supports shall be 16-gauge stainless steel, welded, ground and
Refrigeration system
polished into one integral unit.
shall
use
HFC-134a
refrigerant.
Refrigerant flow shall be con­trolled by an expansion valve.
Interior liner shall be water-tight and constructed of 22-gauge
Cabinet shall maintain 36°F to 40°F (2°C to 4°C) tem­per­a­ture
stainless steel with a 1.00” (3cm) I.P.S. drain. Unit shall be
with lids closed for storage. Refrigeration system shall be
insulated with high-density, foamed-in-place environmentally
controlled by a pressure control, located near the con­densing
friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion
unit.
Potential), Non GWP (Global Warming Potential) poly­ure­thane
insulation with a non-conductive top break­er strip. Refrigerated
Electrical connections shall be 120 volt, 60 cycle, single phase.
compartment is equipped with drain plumbed to a drain valve
Unit shall have a 9’ (2.7m) long electrical cord and NEMA 5-15P
located at the bottom of the counter. Each opening shall have
plug. Exterior has an ON/OFF switch.
a stainless steel sliding lid recessed handles. Three stainless
steel louvers shall be installed in the end and sides of the
Legs: Unit shall be mounted on 6.00” (15cm) high adjustable
cabinet to allow proper air flow to the condensing unit.
stainless steel legs.
Each self-leveling mechanism shall be field adjustable by
NOTE: This equipment is intended for storage and /or display
adding or removing stainless steel extension springs in the
of pre-packaged or bottled products only.
elevator housing inside the unit. The elevators shall be
connected by removable platform carriers constructed of 18-
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
N6/N10/N14 Free-Standing Self-Contained Milk Or Beverage Dispensers
Shelleymatic®
Shelleymatic®
by Delfield
10.50"
27cm
19.75"
50cm
16.00"
41cm
16.00"
41cm
D
32.00"
81cm
36.00"
91cm
54.50"
138cm
D=Drain
Free-Standing Self-Contained Milk Or Beverage Dispensers
16.00"
41cm
D
32.00"
81cm
D
Drain Valve
43.88”
111cm
34.75”
88cm
Elevation View
Model N6-1313-34
& N6-1313-36
D=Drain
Plan View
Model N14-1313-34
& N14-1313-36
Drain Valve
Drain Valve
25.5”
65cm
32.00"
81cm
73.00"
185cm
D=Drain
Plan View
Model N10-1313-34
& N10-1313-36
Plan View
Model N6-1313-34
& N6-1313-36
N6/N10/N14
29.12"
74cm
Elevation View
Model N10-1313-34
& N10-1313-36
Elevation View
Model N14-1313-34
& N14-1313-36
34.00”
86cm
or
36.00”
91cm
Drain valve with
garden hose hookup.
6.12”
16cm
End View
All Models
Specifications
Model
Unit Height
Crate
Capacity
H.P.
Amps
V/Hz/Ph
Nema Plug
BTU Load
BTU
Capacity
Ship Weight
N6-1313-34
34” (86cm)
6
1/4
5.0
120/60/1
5-15P
250
1170
382 lbs/ 173 kg
N6-1313-36
36” (91cm)
6
1/4
5.0
120/60/1
5-15P
250
1170
402 lbs/ 182 kg
N10-1313-34
34” (86cm)
10
1/4
5.0
120/60/1
5-15P
350
1320
545 lbs/ 247 kg
N10-1313-36
36” (91cm)
10
1/4
5.0
120/60/1
5-15P
350
1320
565 lbs/ 256 kg
N14-1313-34
34” (86cm)
14
1/4
5.0
120/60/1
5-15P
460
1420
650 lbs/ 295 kg
N14-1313-36
36” (91cm)
14
1/4
5.0
120/60/1
5-15P
460
1420
670 lbs/ 304 kg
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSN6_10_14
02/09