Yamaha HTR-5066 Owner's manual

AV Receiver
Owner’s Manual
Read the supplied booklet “Safety Brochure” before using the unit.
English
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
FEATURES
5
9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 30
10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 31
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PLAYBACK
35
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PREPARATIONS
11
Selecting the input source and favorite settings with one touch
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
5.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Enjoying pure high fidelity sound (direct playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
7.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 42
Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Connecting Zone B speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 51
6 Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
En
2
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 54
Controlling external devices with the remote control . . . . . . . . . . . . . 85
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Registering the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Registering the remote control codes for playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Playing back iTunes/iPod music via a network (AirPlay) . . . . . . . . . . . 59
Resetting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . . 88
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Playing back music in multiple rooms (HTR-5066 only) . . . . . . . . . . . . 61
APPENDIX
89
Preparing Zone B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Configuring playback settings for different playback sources
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CONFIGURATIONS
68
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 68
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Configuring the system settings (ADVANCED SETUP menu) . . . . . . . . 83
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Changing the FM/AM tuning frequency setting (TU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
En
3
Accessories
Operating range of the remote control
Check that the following accessories are supplied with the product.
• Point the remote control at the remote control sensor on the unit and remain within the operating range
shown below.
 Remote control
 Batteries (AAA, R03, UM-4) (x2)
Within 6 m (20 ft)
30°
30°
Insert the batteries the right
way round.
 AM antenna
 FM antenna
*One of the above is supplied depending on the region of
purchase.
 YPAO microphone
 CD-ROM (Owner’s Manual)
• The illustrations of the main unit and remote control used in this manual are of the HTR-5066 (U.S.A.
model), unless otherwise specified.
• Some features are not available in certain regions.
• Due to product improvements, specifications and appearance are subject to change without notice.
• This manual explains operations using the supplied remote control.
 Easy Setup Guide
 Safety Brochure
• This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”
and “iPad”, unless otherwise specified.
•
indicates precautions for use of the unit and its feature limitations.
•
indicates supplementary explanations for better use.
Accessories
En
4
FEATURES
What you can do with the unit
Wide variety of supported content
• iPod/iPhone/iPad
. p.47
• USB
. p.51
• Media server (PC/NAS)
. p.54
• Internet radio
. p.57
• AirPlay
. p.59
Supports 2- to 5.1-channel (to 7.1-channel*)
speaker system. Allows you to enjoy your favorite
acoustic spaces in various styles.
• Automatically optimizing the speaker . p.31
settings to suit your room (YPAO)
• Reproducing stereo or multichannel
sounds with the sound fields like
actual movie theaters and concert
halls (CINEMA DSP)
*
*
. p.38
• Enjoying compressed music with
. p.42
enhanced sound (Compressed Music
Enhancer)
• Playing back music in multiple rooms . p.61
(Zone B)*
Network contents
* HTR-5066 only
Speakers
Audio
iPod/iPhone/iPad
Audio
HDMI Control
USB device
3D and 4K signals supported
Audio
HDMI Control
Audio/Video
BD/DVD player
Audio/Video
TV
AV receiver (the unit)
Control
Audio/Video
(via HDMI or MHL)
Smartphone/Tablet
Change the input source
and favorite settings with
one touch (SCENE)
. p.36
Sequential operation of a TV,
AV receiver, and BD/DVD
player (HDMI Control)
TV remote control
. p.100
FEATURES ➤ What you can do with the unit
En
5
Full of useful functions!
Useful tips
❑ Connecting various devices (p.23)
❑ Creating 3-dimensional sound fields (p.38)
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
game consoles, camcorders, and other devices.
The Virtual Presence Speaker (VPS) function allows you
to create a 3-dimensional sound field in your own room
(CINEMA DSP 3D).
The combination of video/audio input jacks does not
match an external device...
Use “Audio In” in the “Option” menu to change the
combination of video/audio input jacks so that it matches
the output jack(s) of your external device (p.25).
Video and audio are not synchronized...
Use “Lipsync” in the “Setup” menu to adjust the delay
between video and audio output (p.76).
BD/DVD
player
I want to hear audio from the TV speakers...
Use “Audio Output” in the “Setup” menu to select the
output destination of signals input into the unit (p.74).
Your TV speakers may be selected as an output
destination.
Set-top box
Game
console
Camcorder
I want to use the supplied remote control to operate
external devices…
TV
Register the remote control codes of the external
devices (such as a TV and BD/DVD players) (p.85).
❑ Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.18)
When using an ARC -compatible TV, you only need one
HDMI cable to enable video output to the TV, audio input
from the TV, and the transmission of HDMI Control signals.
HDMI Control
TV audio
Video from
external device
❑ Easy operation and wireless music
playback from iPhone or Android device
By using the application for smartphone/tablet “AV
CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit our
website for details.
❑ Listening to FM/AM radio (p.43)
The unit is equipped with a built-in FM/AM tuner. You
can register up to 40 favorite radio stations as presets.
❑ Enjoying pure high fidelity sound (p.41)
When the direct playback mode is enabled, the unit
plays back the selected source with the least circuitry,
which lets you to enjoy Hi-Fi sound quality.
❑ Easy operation with a TV screen
I want to change the on-screen menu language...
Use “Language” in the “Setup” menu to select a
language from English, Japanese, French, German,
Spanish, Russian, Italian and Chinese (p.30).
I want to update the firmware...
Use “Network Update” (p.88) in the “Setup” menu or
“UPDATE” (p.84) in the “ADVANCED SETUP” menu to
update the unit’s firmware.
Many other settings are available that let you to
customize the unit. For details, see the following pages.
You can operate the iPod or USB storage device, view
information, or easily configure the settings using the
on-screen menu.
• SCENE settings (p.36)
❑ Low power consumption
• Various function settings (p.69)
The ECO mode (power saving function) reduces the
unit’s power consumption and helps to create an
eco-friendly home theater system (p.78).
• System settings (p.83)
• Sound/video settings and signal information for each
source (p.64)
FEATURES ➤ What you can do with the unit
En
6
Part names and functions
Front panel
1
2
3
4
5 6
7
8
9
:
A
YPAO MIC
DIRECT
INFO
MEMORY
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TV
TONE CONTROL
NET
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
B
1 z (power) key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Control is enabled (p.74)
• Standby Through is enabled (p.74)
• Network Standby is enabled (p.81)
• An iPod is being charged (p.47)
3 YPAO MIC jack
For connecting the supplied YPAO microphone (p.31).
4 Remote control sensor
Receives remote control signals (p.4).
5 INFO key
Selects the information displayed on the front display (p.63).
6 MEMORY key
Registers FM/AM radio stations as preset stations (p.44).
VIDEO AUX
VIDEO
AUDIO
C
D E F
G
H
5V
2.1A
I
7 PRESET keys
Select a preset FM/AM radio station (p.45).
8 FM and AM keys
Switch between FM and AM (p.43).
9 TUNING keys
Select the radio frequency (p.43).
0 Front display
Displays information (p.8).
A DIRECT key
Enables/disables the direct playback mode (p.41).
B PHONES jack
For connecting headphones.
C INPUT keys
Select an input source.
D TONE CONTROL key
J
E SCENE keys
Select the registered input source and sound program with
one touch. Also, turns on the unit when it is in standby mode
(p.36).
F PROGRAM keys
Select a sound program or a surround decoder (p.37).
G STRAIGHT key
Enables/disables the straight decode mode (p.40).
H VIDEO AUX jacks
For connecting devices, such as camcorders and game
consoles (p.26).
I USB jack
For connecting a USB storage device (p.51) or an iPod
(p.47).
J VOLUME knob
Adjusts the volume.
Adjusts the high-frequency range and low-frequency range
of output sounds (p.65).
FEATURES ➤
Part names and functions
En
7
Front display (indicators)
1
2
3
4
5
ENHANCER ADAPTIVE DRC
STEREO
3 TUNED
OUT
6
7
8
SLEEP
SP A
SP B
9
VOL.
MUTE
SW
C
L
R
SL
SR
SBL SB SBR
:
1 HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2 CINEMA DSP
Lights up when CINEMA DSP (p.38) is working.
CINEMA DSP n
Lights up when CINEMA DSP 3D (p.40) is working.
3 ENHANCER
Lights up when Compressed Music Enhancer (p.42) is
working.
4 ADAPTIVE DRC
Lights up when Adaptive DRC (p.65) is working.
5 STEREO
Lights up when the unit is receiving a stereo FM radio signal.
A
6 ZONE indicators (HTR-5066 only)
“SP A” lights up when the Zone A speaker output is enabled
and “SP B” lights up when the Zone B speaker output is
enabled (p.62).
7 SLEEP
Lights up when the sleep timer is on.
8 MUTE
Blinks when audio is muted.
9 Volume indicator
Indicates the current volume.
0 Cursor indicators
Indicate the remote control cursor keys currently operational.
>
B
B Speaker indicators
Indicate speaker terminals from which signals are output.
L Subwoofer
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
H Surround back speaker (L)*
J Surround back speaker (R)*
K Surround back speaker*
* HTR-5066 only
A Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.63).
TUNED
Lights up when the unit is receiving an FM/AM radio station
signal.
FEATURES ➤
Part names and functions
En
8
Rear panel
1
3
2
4
5
6
7
(HTR-5066 U.S.A. model)
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
MHL 5V 1A
(BD/DVD)
NETWORK
(NET)
ARC
DC OUT
5V 0.5A
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
PR
PR
PB
PB
SPEAKERS
FRONT
CENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SINGLE
Y
COMPONENT
VIDEO
Y
VIDEO
MONITOR OUT
1
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
8
AV
OUT
AUDIO
2
SUBWOOFER
PRE OUT
9 : A B
1 HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.18). When using ARC, TV audio signal
can also be input through the HDMI OUT jack.
2 HDMI 1–4 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.23).
3 HDMI 5/MHL jack
For connecting to an HDMI- or MHL-compatible playback
device and inputting video/audio signals (p.23).
4 ANTENNA jacks
For connecting to FM and AM antennas (p.27).
5 NETWORK jack
For connecting to a network (p.28).
6 DC OUT jack
For supplying power to a Yamaha AV accessory. For details
on connections, refer to the instruction manual of the AV
accessory.
C
7 Power cable
For connecting to an AC wall outlet (p.29).
8 AV 1–6 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.23).
9 AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.29).
0 AUDIO jacks
D
* The area around the video/audio output jacks is
marked in white on the actual product to
prevent improper connections.
B MONITOR OUT jacks
COMPONENT VIDEO jacks:
For connecting to a TV that supports component video and
outputting video signals (p.22).
VIDEO jack:
For connecting to a TV that supports composite video and
outputting video signals (p.22).
C SPEAKERS terminals
For connecting to speakers (p.15).
For connecting to an audio playback device and inputting
audio signals (p.26).
A SUBWOOFER PRE OUT 1–2 jacks (HTR-5066)
SUBWOOFER PRE OUT jack (HTR-4066)
For connecting to a subwoofer (with built-in amplifier) (p.15).
• The SURROUND BACK/BI AMP/ZONE B jacks are available on
HTR-5066 only.
D VOLTAGE SELECTOR
(General model only)
Selects the switch position according to your local voltage
(p.29).
• (HTR-5066 only)
You can connect 2 subwoofers (with built-in amplifier) to the
unit.
FEATURES ➤
Part names and functions
En
9
Remote control
1 Remote control signal transmitter
1
Transmits infrared signals.
CODE SET
2
SOURCE RECEIVER
E
Turns on/off an external device.
SOURCE/RECEIVER key
HDMI
1
2
3
Changes the device (the unit or external device) that is
operated with the remote control (p.86). You can operate the
unit when this key lights up in orange, and an external device
when this key lights up in green.
4
MHL
3
2 SOURCE z key
1
2
3
5
AV
4
5
6
A
V-AUX
USB
NET
B
F
RECEIVER z key
Turns on/off (standby) the unit.
ZONE
3 Input selection keys
AUDIO
TUNER
4
FM
AM
5
INFO
MEMORY
MOVIE
MUSIC
6
7
8
9
:
PRESET
SUR. DECODE STRAIGHT
ENHANCER
SCENE
BD
DVD
TV
NET
RADIO
G
OPTION
SETUP
4 Radio keys
VOLUME
ENTER
RETURN
POP-UP
MENU
MUTE
I
Operate the FM/AM radio (p.43).
FM
Switches to FM radio.
AM
Switches to AM radio.
MEMORY
Registers FM/AM radio stations as presets.
PRESET
Select a preset station.
TUNING
Select the radio frequency.
5 INFO key
2
3
5
6
7
9
0
10
INPUT
TV VOL
4
8
ENT
Selects the information displayed on the front display (p.63).
6 Sound mode keys
Select a sound mode (p.37).
7 SLEEP key
TV
D
H
DISPLAY
MODE
1
C
DIRECT
SLEEP
TOP
MENU
A
B
TUNING
Select an input source for playback.
HDMI 1–4
HDMI 1–4 jacks
HDMI 5/MHL HDMI 5/MHL jack
AV 1–6
AV 1–6 jacks
V-AUX
VIDEO AUX jack (on the front panel)
USB
USB jack (on the front panel)
NET
NETWORK jack (press repeatedly to select a
desired network source)
AUDIO
AUDIO jacks
TV CH
MUTE
Switches the unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min,
off).
8 SCENE keys
(HTR-5066)
9 SETUP key
Displays the setup menu (p.68).
0 Menu operation keys
Cursor keys Select a menu or a parameter.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
A MODE key
Switches between “Stereo” and “Mono” for FM radio
reception (p.43).
Switches the iPod operation modes (p.49).
B External device operation keys
Let you play back and select menus and perform other
operations for external devices (p.86).
C Numeric keys
Let you enter numerical values, such as radio frequencies.
D TV operation keys
Let you select TV input and volume, and perform other TV
operations (p.85).
E CODE SET button
Registers remote control codes of external devices on the
remote control (p.85).
F ZONE keys (HTR-5066 only)
Enable/disable the audio output to Zone A or Zone B (p.62).
★/★★ keys (HTR-4066 only)
Change the external device to be controlled without
switching the input source (p.86).
G OPTION key
Displays the option menu (p.64).
H VOLUME keys
Adjust the volume.
I MUTE key
Mutes the audio output.
• To operate external devices with the remote control, register a
remote control code for each device before using (p.85).
Select the registered input source and sound program with
one touch. Also, turns on the unit when it is in standby mode
(p.36).
FEATURES ➤
Part names and functions
En
10
PREPARATIONS
General setup procedure
1 Placing speakers (p.12)
Select the speaker layout for the number of speakers that you are using and place them in your room.
2 Connecting speakers (p.15)
Connect the speakers to the unit.
3 Connecting a TV (p.18)
Connect a TV to the unit.
4 Connecting playback devices (p.23)
Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
5 Connecting the FM/AM antennas (p.27)
Connect the supplied FM/AM antennas to the unit.
6 Connecting to a network (p.28)
Connect the unit to a network.
7 Connecting recording devices (p.29)
Connect recording devices to the unit.
8 Connecting the power cable (p.29)
After all the connections are complete, plug in the power cable.
9
Selecting an on-screen menu language
(p.30)
Select the desired on-screen menu language (default: English).
10
Optimizing the speaker settings
automatically (YPAO) (p.31)
Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
PREPARATIONS
➤ General setup procedure
En
11
1 Speaker placement 2 3 4 5 6 7 8 9 10
1 Placing speakers
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
Caution
• (U.S.A. model only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6  MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.14).
• (Except for U.S.A. model)
Use speakers with an impedance of at least 6 .
Speaker system (the number of channels)
Speaker type
Front (L)
Abbr.
Function
1
Front (R)
2
Center
3
Surround (L)
4
Surround (R)
5
Produce front right/left channel sounds (stereo sounds).
Produces center channel sounds (such as movie dialogue and vocals).
Produce surround right/left channel sounds.
Surround back (L)*
6
Surround back (R)*
7
Surround back*
8
Produces sounds mixed from surround back left/right channel sounds.
9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
You can connect 2 subwoofers (with built-in amplifier) to the unit.*
Subwoofer
Produce surround back left/right channel sounds.
7.1*
6.1*
5.1
4.1
3.1
2.1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
* HTR-5066 only
• HTR-5066 supports 2- to 7.1-channel system, and HTR-4066 supports 2- to 5.1-channel speaker system.
• (HTR-5066 only)
Two subwoofers connected to the unit output the same sounds.
PREPARATIONS
➤ Placing speakers
En
12
1 Speaker placement 2 3 4 5 6 7 8 9 10
7.1-channel system (HTR-5066 only)
1
9
5.1-channel system
1
2
3
9
4
9
5
10° to 30°
3
4
5
10° to 30°
10° to 30°
6
2
10° to 30°
7
30 cm (1 ft) or more
6.1-channel system (HTR-5066 only)
1
9
4.1-channel system
1
2
3
9
4
5
10° to 30°
2
10° to 30°
4
5
10° to 30°
10° to 30°
8
PREPARATIONS
➤ Placing speakers
En
13
1 Speaker placement 2 3 4 5 6 7 8 9 10
■ Setting the speaker impedance
3.1-channel system
(U.S.A. model only)
1
9
2
3
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6  MIN”. In this case, you can also
use 4-ohm speakers as the front speakers.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press z (power).
z (power)
STRAIGHT
3
2.1-channel system
SPIMP.8MIN
1
9
Check that “SP IMP.” is displayed on the front display.
2
4
5
Press STRAIGHT to select “6  MIN”.
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
PREPARATIONS
➤ Placing speakers
En
14
1 2 Speaker connections 3 4 5 6 7 8 9 10
2 Connecting speakers
Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 5.1and 7.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 5.1-channel system.
5.1-channel system
7.1-channel system
(HTR-5066 only)
The unit (rear)
The unit (rear)
SPEAKERS
PB
FRONT
Caution
CENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SPEAKERS
PB
FRONT
CENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SINGLE
Y
• Remove the unit’s power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit’s metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front
display when the unit is turned on.
SINGLE
Y
OR OUT
OR OUT
1
1
2
SUBWOOFER
PRE OUT
2
SUBWOOFER
PRE OUT
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
+
–
+
–
1
2
1
2
Audio pin cable (x1: for connecting a subwoofer)
9
4
3
9
5
9
4
5
6
• (HTR-5066 only)
You can connect 2 subwoofers (with built-in amplifier) to the unit.
The 2 subwoofers output the same sound.
3
7
• When using only one surround back speaker, connect it to the
SINGLE jack (L side).
PREPARATIONS ➤ Connecting speakers
En
15
1 2 Speaker connections 3 4 5 6 7 8 9 10
■ Connecting speaker cables
Speaker cables have two wires. One is for connecting
the negative (-) terminal of the unit and the speaker, and
the other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminal.
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable and twist the bare wires of
the cable firmly together.
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
Connecting front speakers that
support bi-amp connections
(HTR-5066 only)
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND BACK/BI-AMP/ZONE B jacks.
To enable the bi-amp function, set “Power Amp Assign”
(p.71) in the “Setup” menu to “BI-AMP” after connecting
the power cable to an AC wall outlet.
The unit (rear)
SPEAKERS
FRONT
CENTER
SURROUND
b
SINGLE
c
FR
ON
T
d
• Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. If you are not
making bi-amp connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
• Surround back speakers cannot be used during bi-amp
connections.
Connecting Zone B speakers
(HTR-5066 only)
SURROUND BACK/BI AMP
/ZONE B
d Tighten the terminal.
+ (red)
Caution
The Zone A/B function allows you to playback an input
source in the room where the unit is installed (Zone A)
and in another room (Zone B). To connect the Zone B
speakers, see “Playing back music in multiple rooms
(HTR-5066 only)” (p.61).
a
- (black)
Using a banana plug
(U.S.A., China, Australia and General models only)
1
a Tighten the speaker terminal.
2
b Insert a banana plug into the end of the terminal.
3
Banana plug
a
9
FR
ON
T
4
b
5
■ Connecting the subwoofer
(with built-in amplifier)
Use an audio pin cable to connect the subwoofer.
Y
OR OU
MONIT
Audio pin cable
T
1
AV6
• The FRONT jacks and SURROUND BACK/BI-AMP/ZONE B jacks
output the same signals.
AV
OUT
AUDIO
2
SUBW
PRE OOFER
OUT
PREPARATIONS ➤ Connecting speakers
En
16
Input/output jacks and cables
■ Video/audio jacks
■ Video jacks
■ Audio jacks
❑ HDMI jacks
❑ COMPONENT VIDEO jacks
❑ OPTICAL jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Transmit video signals separated into three
components: luminance (Y), chrominance blue (PB),
and chrominance red (PR). Use a component video
cable with three plugs.
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
HDMI cable
Digital optical cable
Component video cable
OPTICAL
( TV )
AV 4
❑ COAXIAL jacks
• Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
• The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K video transmission (through output)
features.
❑ VIDEO jacks
• Use high speed HDMI cables to enjoy 3D or 4K videos.
Transmit analog video signals. Use a video pin cable.
❑ HDMI/MHL jack
Transmit digital video and digital sound. Use an MHL
cable.
HDMI 5
MHL 5V 1A
Video pin cable
❑ AUDIO jacks
(Stereo L/R jacks)
Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).
MHL cable
• The HDMI 5/MHL jack of the unit supports both HDMI and MHL
connections. Use a cable that matches the jack on your
MHL-compatible mobile device. When connecting an
HDMI-compatible playback device to the jack, use an HDMI cable.
For details on an MHL connection, see “MHL connection” (p.23).
Stereo pin cable
(Stereo mini jack)
Transmits analog stereo audio signals. Use a stereo
mini-plug cable.
Stereo mini-plug cable
PREPARATIONS ➤
Input/output jacks and cables
En
17
1 2 3 TV connection 4 5 6 7 8 9 10
3 Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
The connection method varies depending on the functions and video input jacks
available on your TV.
Refer to the instruction manual of the TV and choose a connection method.
Does your TV support
Audio Return Channel (ARC)?
Yes
■ Connection Method 1 (p.18)
About Audio Return Channel (ARC)
Yes
■ Connection Method 2 (p.20)
■ Connection Method 1 (HDMI Control/ARC-compatible TV)
Connect the TV to the unit with an HDMI cable.
No
Does your TV have an
HDMI input jack?
HDMI Control allows you to operate external devices via HDMI. If you connect a TV
that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control. You can also control playback
devices (such as an HDMI Control-compatible BD/DVD player) connected to the
unit with an HDMI cable. For details, see “HDMI Control” (p.100).
ARC allows audio signals to travel both ways under HDMI Control. If you connect a
TV that supports HDMI Control and ARC to the unit with a single HDMI cable, you
can output video/audio to the TV or input TV audio to the unit.
No
Does your TV support
HDMI Control?
About HDMI Control
Yes
■ Connection Method 3 (p.21)
• The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.74) in the “Setup” menu.
• Use an HDMI cable that supports ARC.
No
The unit (rear)
HDMI OUT jack
■ Connection Method 4 (p.22)
HDMI input
(ARC-compatible)
HDMI OUT
HDMI 1
HDMI OUT
HDMI 2
HDMI
HDM
(BD/DVD)
ARC
ARC
HDMI
ARC
When connecting a video device with an analog video output
ANTEN
AM
• If you will connect any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, you also
need to connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks (p.22).
• If you will connect any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX (VIDEO) of the
unit, you also need to connect the TV to the MONITOR OUT (VIDEO) jack (p.22).
When using a set-top box to watch TV
HDMI
(RADIO
PR
PB
Y
COMPONENT
VIDEO
VIDEO
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
TV
• Connect the set-top box to the unit in the same way as playback devices (p.23). If you will receive TV
broadcasts only from the set-top box, you do not need to make an audio cable connection between the
TV and the unit or configure the ARC setting.
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
PREPARATIONS ➤ Connecting a TV
En
18
1 2 3 TV connection 4 5 6 7 8 9 10
❑ Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.
3
Configure the settings for HDMI Control.
For details on settings and operating your TV, refer to the instruction manual for the TV.
a Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD player).
1
After connecting external devices (such as a TV and playback devices)
and the power cable to the unit, turn on the unit, TV, and playback devices.
b Turn off the TV’s main power and then turn off the unit and playback devices.
2
Configure the settings of the unit.
c Turn on the unit and playback devices and then turn on the TV’s main power.
d Switch the TV input to display video from the unit.
a Check that ARC is enabled on the TV.
b Switch the TV input to display video from the unit.
c Press SETUP.
VOLUME
ENTER
RETURN
DISPLAY
TOP
On the unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
OPTION
SETUP
e Check the following.
SETUP
Cursor keys
ENTER
POP UP
d Use the cursor keys to select “HDMI” and press ENTER.
f Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
If you cannot hear the TV’s audio, check that “ARC” (p.75) in the “Setup” menu is set to
“On”.
Setup
Speaker
Configuration
HDMI
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
Sound
ECO
Function
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
Network
Language
• If the audio is interrupted while using ARC, set “ARC” (p.75) in the “Setup” menu to “Off” and use a digital
optical cable to input TV audio to the unit (p.20).
e Press ENTER again.
f Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to
select “On” as shown below.
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks,
use “TV Audio Input” (p.74) in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function (p.36), you also need to change the input assignment for SCENE(TV).
Configuration
HDMI Control
On
Audio Output
Auto
Standby Through
Auto
TV Audio Input
AV4
Standby Sync
Auto
ARC
On
SCENE
Back: RETURN
g Press SETUP.
PREPARATIONS ➤ Connecting a TV
En
19
1 2 3 TV connection 4 5 6 7 8 9 10
■ Connection Method 2 (HDMI Control-compatible TV)
❑ Necessary settings
Connect the TV to the unit with an HDMI cable and a digital optical cable.
To use HDMI Control, you need to configure the following settings.
For details on settings and operating your TV, refer to the instruction manual for the TV.
• The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.74) in the “Setup” menu.
The unit (rear)
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit, TV, and
playback devices.
2
Configure the settings of the unit.
HDMI OUT jack
HDMI input
HDMI OUT
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI
(BD/DVD)
ARC
ARC
HDMI
a Switch the TV input to display video from the unit.
HDMI
ANTENNA
AM
(RADIO) FM
b Press SETUP.
PR
PB
Y
COMPONENT
VIDEO
OPTION
SETUP
VIDEO
OPTICAL
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
OPTICAL
( TV )
AV 5
AV 6
O
O
VOLUME
ENTER
A
(TV)
O
AV 4
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
RETURN
DISPLAY
TOP
SETUP
Cursor keys
ENTER
POP UP
c Use the cursor keys to select “HDMI” and press ENTER.
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
Setup
Speaker
Configuration
HDMI
Sound
ECO
Function
Network
Language
d Press ENTER again.
e Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to
select “On” as shown below.
Configuration
HDMI Control
On
Audio Output
Auto
Standby Through
Auto
TV Audio Input
AV4
Standby Sync
Auto
ARC
On
SCENE
Back: RETURN
f Press SETUP.
PREPARATIONS ➤ Connecting a TV
En
20
1 2 3 TV connection 4 5 6 7 8 9 10
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (such as a HDMI
Control-compatible BD/DVD player).
■ Connection Method 3 (TV with HDMI input jacks)
Connect the TV to the unit with an HDMI cable and a digital optical cable.
The unit (rear)
HDMI OUT jack
HDMI input
b Turn off the TV’s main power and then turn off the unit and playback devices.
c Turn on the unit and playback devices and then turn on the TV.
HDMI OUT
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI
(BD/DVD)
ARC
ARC
HDMI
d Switch the TV input to display video from the unit.
HDMI
ANTENNA
AM
(RADIO) FM
PR
e Check the following.
On the unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
PB
Y
COMPONENT
VIDEO
VIDEO
OPTICAL
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
OPTICAL
( TV )
AV 5
AV 6
O
O
A
(TV)
O
AV 4
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
If you switch the input source of the unit to “AV 4” using the AV 4 or SCENE(TV) keys,
the TV audio will be played back on the unit.
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the
SCENE function (p.36), you also need to change the input assignment for SCENE(TV).
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks or
if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV Audio Input”
(p.74) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.36),
you also need to change the input assignment for SCENE(TV).
PREPARATIONS ➤ Connecting a TV
En
21
1 2 3 TV connection 4 5 6 7 8 9 10
■ Connection Method 4 (TV without HDMI input jacks)
❑ VIDEO (composite video) connection (with a video pin cable)
When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the
unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks.
The unit (rear)
When connecting any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX
(VIDEO) jack of the unit, connect the TV to the MONITOR OUT (VIDEO) jack.
• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
• Operations with TV screen are available only when your TV is connected to the unit via HDMI.
HDMI 1
HDMI OUT
If you select “AV 4” as the input source by pressing AV 4 or SCENE(TV), the TV audio
will be played back on the unit.
MONITOR OUT
(VIDEO) jack
HDMI 2
HDMI 3
HDMI 4
Video input
(composite video)
HDMI 5
MHL 5V
(BD/DVD)
VIDEO
ARC
V
V
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
MONITOR OUT
PR
PR
PB
PB
Y
COMPONENT
VIDEO
Y
VIDEO
MONITOR OUT
1
OPTICAL
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
OPTICAL
AUDIO
2
SUBWOOFER
PRE OUT
O
O
(TV)
AV 4
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the
SCENE function (p.36), you also need to change the input assignment for SCENE(TV).
AV 4 (OPTICAL) jack
TV
Audio output
(digital optical)
❑ COMPONENT VIDEO connection (with a component video cable)
Video input
(component video)
MONITOR OUT
(COMPONENT VIDEO) jacks
COMPONENT
VIDEO
PR
COMPONENT
VIDEO
The unit (rear)
PR
HDMI 1
UT
HDMI 2
HDMI 3
HDMI 4
HDMI
MHL 5V
(BD/DVD)
5
1A
PR
PR
PB
PB
Y
Y
PB
PB
Y
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
Y
MONITOR OUT
PR
PB
Y
VIDEO
MONITOR OUT
1
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
OPTICAL
AUDIO
2
SUBWOOFER
PRE OUT
O
O
(TV)
AV 4
AV 4 (OPTICAL) jack
TV
Audio output
(digital optical)
PREPARATIONS ➤ Connecting a TV
En
22
1 2 3 4 Playback device connections 5 6 7 8 9 10
4 Connecting playback devices
The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod or a USB storage device, see the following pages.
– Connecting an iPod (p.47)
– Connecting a USB storage device (p.51)
Connecting video devices (such as BD/DVD players)
❑ MHL connection
Connect an MHL-compatible mobile device (such as smartphones) to the unit with an
MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the
mobile device. The HDMI 5 jack of the unit enables you to input videos and audio
directly from the mobile device to the unit.
HDMI 5/MHL jack
The unit (rear)
HDMI 5
MHL 5V 1A
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
MHL 5V 1A
(BD/DVD)
ARC
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
PR
PR
PB
PB
MHL
Y
COMPONENT
VIDEO
MHL output
Y
VIDEO
MONITOR OUT
1
• If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device (p.25).
MHL
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
Connect a video device to the unit with an HDMI cable.
If you select the input source by pressing HDMI 5, the video/audio played back on the
mobile device will be output from the unit.
HDMI 1–5 jacks
HDMI 1
HDMI 2
HDMI 3
HDMI 4
(BD/DVD)
HDMI 5
MHL 5V 1A
The unit (rear)
• To watch videos input to the HDMI 5/MHL jack, you need to connect your TV to the HDMI OUT jack of the
unit (p.18 to 21).
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI
MHL 5V
(BD/DVD)
• You need to prepare an MHL cable that match the jack on your mobile device.
5
1A
HDMI output
HDMI
ARC
ANTENNA
AM
(RADIO) FM
HDMI
COMPONENT
VIDEO
PR
PR
PB
PB
Y
COMPONENT
VIDEO
• You can operate the mobile device using the menu operation keys, external device operation keys and
numeric keys on the remote control. However, some features may not be compatible, depending on the
mobile device or its application. In this case, operate the mobile device itself.
HDMI
Y
VIDEO
MONITOR OUT
1
OPTICAL
AV 1
COAXIAL
AV 2
AUDIO
2
SUBWOOFER
PRE OUT
Mobile device
■ HDMI connection
HDMI OUT
AV 6
AV
OUT
COAXIAL
OPTICAL
( TV )
AV 3
AV 4
AV 5
AV 6
AV
OUT
AUDIO
• If “Standby Through” (p.74) in the “Setup” menu is set to “On”, you can output mobile device videos/audio
to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby
mode.
2
SUBWOOFER
PRE OUT
Video device
• The unit supplies power to the mobile device in the following conditions.
– The unit is turned on.
If you select the input source by pressing HDMI 1–5, the video/audio played back on
the video device will be output from the unit.
– The unit is in standby mode while “Standby Through” (p.74) in the “Setup” menu is set to “On”.
• To watch videos input to the HDMI 1–5 jacks, you need to connect your TV to the HDMI OUT jack of the
unit (p.18 to 21).
PREPARATIONS ➤ Connecting playback devices
En
23
1 2 3 4 Playback device connections 5 6 7 8 9 10
■ Component video connection
■ Composite video connection
Connect a video device to the unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on
the audio output jacks available on your video device.
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit)
depending on the audio output jacks available on your video device.
Output jacks on video device
Output jacks on video device
Input jacks on the unit
Video
Input jacks on the unit
Audio
Video
Digital optical
AV 1 (COMPONENT VIDEO + OPTICAL)
Digital coaxial
AV 2 (COMPONENT VIDEO + COAXIAL)
Audio
Digital coaxial
AV 3 (VIDEO + COAXIAL)
Digital optical
AV 4 (VIDEO + OPTICAL)
Analog stereo
AV 5–6 (VIDEO + AUDIO)
Component video
Composite video
Video output
(component video)
AV 1–2
(COMPONENT VIDEO)
jacks
Video output
(composite video)
COMPONENT
VIDEO
The unit (rear)
AV 3–6 (VIDEO) jack
PR
VIDEO
PR
HDMI 1
HDMI OUT
HDMI 2
(BD/DVD)
PB
ARC
PR
PR
PB
PB
Y
Y
V
PB
HDMI 1
HDMI OUT
VIDEO
Y
COMPONENT
VIDEO
ANTENNA
AM
(RADIO) FM
PR
Y
COMPONENT
VIDEO
PR
HDMI 3
V
Y
AM
PB
HDMI 2
(BD/DVD)
ARC
PB
Video device
Y
COMPONENT
VIDEO
VIDEO
O
VIDEO
C
O
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
OPTICAL
AV 5
AV 1
Video device
COAXIAL
AV 2
C
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
COAXIAL
AV
OUT
O
C
O
OPTICAL
COAXIAL
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
C
COAXIAL
OPTICAL
OPTICAL
L
Audio output
(digital optical or digital coaxial)
If you select the input source by pressing AV 1–2, the video/audio played back on the
video device will be output from the unit.
• To watch videos input to the AV 1–2 (COMPONENT VIDEO) jacks, you need to connect your TV to the
MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.22).
The unit (rear)
L
L
L
R
R
R
R
Audio output
Any of AV 3 (COAXIAL) jack,
(either digital optical,
AV 4 (OPTICAL) jack,
digital coaxial, or analog stereo)
AV 5–6 (AUDIO) jacks
If you select the input source by pressing AV 3–6, the video/audio played back on the
video device will be output from the unit.
• To watch videos input to the AV 3–6 (VIDEO) jacks, you need to connect your TV to the MONITOR OUT
(VIDEO) jack of the unit (p.22).
PREPARATIONS ➤ Connecting playback devices
En
24
1 2 3 4 Playback device connections 5 6 7 8 9 10
■ Changing the combination of video/audio input jacks
If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Output jacks on video device
Video
Video
Digital optical
Component video
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
2
Press AV 2 to select “AV 2” (video input jack to be used) as the input
source.
Input jacks on the unit
Audio
HDMI
1
Audio
HDMI
AV 1 (OPTICAL)
AV 4 (OPTICAL)
HDMI 1–5
Digital coaxial
HDMI 1–5
AV 2–3 (COAXIAL)
Analog stereo
HDMI 1–5
AV 5–6 (AUDIO)
AUDIO
Analog stereo
AV 1–2
(COMPONENT
VIDEO)
AV 5–6 (AUDIO)
AUDIO
1
2
3
1
2
3
5
6
A
NET
RADIO
For example, if you have connected a video device to AV 2 (COMPONENT VIDEO) and
AV 5 (AUDIO) jacks of the unit, change the combination setting as follows.
5
BD
DVD
TV
PR
PR
HDMI 1
HDMI OUT
HDMI 2
PB
HDMI 3
(BD/DVD)
PR
Y
ARC
3
4
OPTION
VOLUME
ENTER
RETURN
DISPLAY
Cursor keys
ENTER
POP UP
Press OPTION.
Use the cursor keys (q/w) to select “Audio In” and press ENTER.
VOL.
AudioIn
COMPONENT
VIDEO
The unit (rear)
OPTION
SETUP
Video output
(component video)
AV 2 (COMPONENT VIDEO) jacks
AV 2
AV
4
TOP
❑ Necessary setting
4
MHL
5
PB
Use the cursor keys (e/r) to select “AV 5” (audio input jack to be
used).
PB
ANTENNA
AM
Y
(RADIO) FM
VOL.
Y
PR
AudioAV5
PB
Y
COMPONENT
VIDEO
L
VIDEO
AUDIO
L
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
L
L
R
OPTICAL
AV
OUT
R
R
R
AV 5
AV 5 (AUDIO) jacks
Audio output
(analog stereo)
Video device
6
Press OPTION.
This completes the necessary settings.
If you select “AV 2” as the input source by pressing AV 2, the video/audio played back
on the video device will be output from the unit.
PREPARATIONS ➤ Connecting playback devices
En
25
1 2 3 4 Playback device connections 5 6 7 8 9 10
Connecting audio devices (such as CD players)
Connecting to the jacks on the front panel
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as
camcorders and portable audio players to the unit.
Audio output jacks on audio device
Audio output jacks on the unit
Digital optical
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial
AV 2–3 (COAXIAL)
Analog stereo
AV 5–6 (AUDIO)
AUDIO
Before making a connection, stop playback on the device and turn down the volume on
the unit.
SCENE
BD
DVD
INPUT
TONE CONTROL
TV
NET
PROGRAM
RADIO
STRAIGHT
VIDEO AUX
AUDIO
The unit (front)
VIDEO
5V
2.1A
V
The unit (rear)
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
(BD/DVD)
ARC
O
O
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
PR
PR
PB
PB
Y
COMPONENT
VIDEO
OPTICAL
C
C
Portable audio player
COAXIAL
Y
VIDEO
OPTICAL
COAXIAL
MONITOR O
L
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
AUDIO
SUB
PR
L
L
L
R
R
R
AV 1–6 jacks
AUDIO jacks
Audio device
R
Audio output
(either digital optical,
digital coaxial, or analog stereo)
If you select the input source by pressing AV 1–6 or AUDIO, the audio played back on
the audio device will be output from the unit.
Camcorder
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• To watch videos input to the VIDEO AUX (VIDEO) jack, you need to connect your TV to the MONITOR OUT
(VIDEO) jack of the unit (p.22).
• You need to prepare the video/audio cables that match the output jacks on your device.
• For details on how to connect an iPod or a USB storage device, see “Connecting an iPod” (p.47) or
“Connecting a USB storage device” (p.51).
• When “USB” is selected as the input source, video signals input to the VIDEO AUX (VIDEO) jack are output
from the MONITOR OUT (VIDEO) jack.
PREPARATIONS ➤ Connecting playback devices
En
26
1 2 3 4 5 FM/AM antenna connections 6 7 8 9 10
5 Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
AM antenna
The unit (rear)
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI
MHL 5V
(BD/DVD)
5
1A
NETWORK
(NET)
ARC
DC OUT
5V 0.5A
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
PR
PR
PB
PB
Y
COMPONENT
VIDEO
Y
SPEAKERS
FRONT
VIDEO
CENTER
SURROUND
SURROUND BA
/ZONE
MONITOR OUT
1
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
AUDIO
2
SUBWOOFER
PRE OUT
Assembling and connecting the AM antenna
Hold down
Insert
Release
• Unwind only the length of cable needed from the AM antenna unit.
• The wires of the AM antenna have no polarity.
PREPARATIONS ➤ Connecting the FM/AM antennas
En
27
1 2 3 4 5 6 Network connections 7 8 9 10
6 Connecting to a network
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
Network Attached Storage
(NAS)
Internet
• To use the service via the Internet, broadband connection is strongly recommended.
WAN
PC
LAN
Modem
Router
Network cable
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI
MHL 5V
(BD/DVD)
5
1A
NETWORK
(NET)
ARC
DC OUT
5V 0.5A
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
PR
PR
PB
PB
FRONT
Y
COMPONENT
VIDEO
Y
VIDEO
MONITOR OUT
1
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
AUDIO
2
SUBWOOFER
PRE OUT
The unit (rear)
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.80).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Information” (p.80) in the “Setup” menu.
PREPARATIONS ➤ Connecting to a network
En
28
1 2 3 4 5 6 7 Recording device connections 8 Power cable connection 9 10
7 Connecting recording devices
You can connect video/audio recording devices to the AV OUT jacks. These jacks
output analog video/audio signals selected as the input.
8 Connecting the power cable
Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
• To copy video/audio from a video device, connect the video device to the AV 5–6 jacks or VIDEO AUX
(VIDEO/AUDIO) jacks of the unit.
• To copy audio from an audio device, connect the audio device to the AV 5–6 jacks, AUDIO jacks, or VIDEO
AUX (AUDIO) jacks of the unit.
• Be sure to use the AV OUT jacks only for connecting recording devices.
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
VOLTAGE SELECTOR
Video/audio input
AV OUT jacks
The unit (rear)
V
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI
MHL 5V
(BD/DVD)
V
1A
220V240V
L
R
ANTENNA
(RADIO) FM
COMPONENT
VIDEO
R
PR
AV
OUT
PB
110V 120V
L
5
L
AM
VOLTAGE
SELECTOR
VIDEO
The unit (rear)
R
SPEAKERS
Video recording
device
ENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SINGLE
AUDIO
Y
VIDEO
MONITOR OUT
1
COAXIAL
COAXIAL
OPTICAL
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
AUDIO
2
SUBWOOFER
PRE OUT
After all the connections are complete, plug in the power cable.
The unit (rear)
To an AC wall outlet
NETWORK
(NET)
DC OUT
5V 0.5A
SPEAKERS
FRONT
CENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SINGLE
PREPARATIONS
➤ Connecting recording devices
En
29
1 2 3 4 5 6 7 8 9 Language setting 10
9 Selecting an on-screen menu language
CODE SET
SOURCE RECEIVER
RECEIVER z
Select the desired on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese.
HDMI
1
2
3
4
MHL
1
2
3
5
A
AV
4
5
6
V-AUX
USB
NET
1
2
B
ZONE
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
Press RECEIVER z to turn on the unit.
6
To exit from the menu, press SETUP.
• The information on the front display is provided in English only.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SLEEP
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI. If not, carry out operations while viewing the front display.
SCENE
BD
DVD
TV
NET
RADIO
SETUP
OPTION
SETUP
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
Cursor keys
ENTER
3
4
MUTE
Press SETUP.
Use the cursor keys to select “Language” and press
ENTER.
MODE
1
2
3
4
5
6
7
8
9
0
10
Setup
Speaker
English
HDMI
日本語
Français
Deutsch
Español
Русский
Italiano
Sound
ENT
ECO
TV
Function
INPUT
TV VOL
TV CH
Network
MUTE
Language
5
中文
Use the cursor keys to select the desired language.
Setup
Speaker
English
HDMI
日本語
Français
Deutsch
Español
Русский
Sound
ECO
Function
Network
Language
Italiano
中文
PREPARATIONS ➤ Selecting an on-screen menu language
En
30
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
10 Optimizing the speaker settings automatically (YPAO)
CODE SET
SOURCE RECEIVER
RECEIVER z
HDMI
1
2
3
4
MHL
1
2
3
5
A
AV
4
5
6
V-AUX
USB
NET
B
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
4
Place the YPAO microphone at your listening
position (same height as your ears) and connect it
to the YPAO MIC jack on the front panel.
The unit (front)
ZONE
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
– Use YPAO after connecting a TV and speakers to the unit.
– During the measuring process, test tones are output at high volume. Ensure that
the test tones do not frighten small children. Also, refrain from using this function
at night when it may be a nuisance to others.
1
RADIO
– During the measuring process, you cannot adjust the volume.
OPTION
SETUP
• Please note the following when using YPAO.
2
– During the measuring process, keep the room as quiet as possible.
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
MODE
1
2
3
5
6
7
9
0
10
– Do not connect headphones.
1
2
Press RECEIVER z to turn on the unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
YPAO microphone
Listening
5
position
4
8
ENT
Ear height
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI. If not, carry out operations while viewing the front display.
TV
MUTE
3
4
INPUT
TV VOL
9
TV CH
3
Turn on the subwoofer and set the volume to half. If
the crossover frequency is adjustable, set it to
maximum.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
9
Place the YPAO microphone at
your listening position (same height
as your ears). We recommend the
use of a tripod as a microphone
stand. You can use the tripod
screws to stabilize the microphone.
The following screen appears on the TV.
MAX
Auto Setup
Start
Exit
• (HTR-5066 only)
If you are using bi-amp connection or Zone B speakers, set “Power Amp
Assign” (p.71) in the “Setup” menu to the appropriate setting before starting
YPAO.
PREPARATIONS ➤
Press SETUP key
to Start
Power Amp Assign
Basic
“Power Amp Assign”
setting (p.71)
(HTR-5066 only)
Optimizing the speaker settings automatically (YPAO)
En
31
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
CODE SET
SOURCE RECEIVER
• To cancel the operation, disconnect the YPAO microphone, or use the
cursor keys to select “Exit” and press ENTER, before starting the
measurement.
SOURCE/RECEIVER
HDMI
1
2
3
4
1
2
3
5
• A speaker with a problem is indicated by blinking of the speaker indicators in
the front display.
• If multiple warnings are given (when operating with the front display), use
the cursor keys (q/w) to check the other warning messages.
MHL
AV
4
5
6
A
V-AUX
USB
NET
B
• Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
ZONE
6
• Move to the corner of the room or leave the room.
AUDIO
To save the measurement results, use the cursor
keys (e/r) to select “SAVE” and press ENTER.
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
5
TUNING
SUR. DECODE STRAIGHT
ENHANCER
SCENE
TV
NET
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
MODE
1
2
3
5
6
7
9
0
10
4
Cursor keys
ENTER
RETURN
MUTE
TV CH
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
• To stop the measurement temporarily, press RETURN and follow the
procedure in “Error messages” (p.33).
• If cursor keys do not work, the remote control may be set to the external
device operation mode. In this case, press SOURCE/RECEIVER to set the
remote control to the unit operation mode (the key lights up in orange) and
then use the cursor keys.
The adjusted speaker settings are applied.
The following screen appears on the TV when the
measurement finishes.
• To finish the measurement without saving the result, select “CANCEL”.
8
7
Disconnect the YPAO microphone from the unit.
ENT
Auto Setup
TV
SAVE
-3.0 / +10.0 dB
INPUT
TV VOL
Exit
SETUP
VOLUME
ENTER
RETURN
Measurement
Finished
Start
RADIO
OPTION
SETUP
Auto Setup
The measurement will start in 10 seconds. Press ENTER to
start the measurement immediately.
DIRECT
SLEEP
BD
DVD
To start the measurement, use the cursor keys to
select “Start” and press SETUP.
Start
Exit
This completes optimization of the speaker settings.
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK:ENTER
1
Caution
2
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
3
4
1 The number of speakers (front side/rear
side/subwoofer)
2 Speaker distance (nearest/farthest)
3 Adjustment range of speaker output level
4 Warning message (if available)
• If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.33) or “Warning messages” (p.34).
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
32
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
Auto Setup
Start
ERROR
E-5:Noisy
Error
message
Exit
PROCEED
5%
TV screen
Error message
Cause
Remedy
E-1:No Front SP
(E-1:NO FRNT SP)
Front speakers are not detected.
E-2:No Sur. SP
(E-2:NO SUR SP)
One of the surround speakers cannot be
detected.
E-4:SBR  SBL
(E-4:SBR -> SBL)
A surround back speaker is connected to
the R side only.
When using only one surround back speaker, you need to
connect it to the SINGLE jack (L side). Exit YPAO, turn off the
unit, and then reconnect the speaker.
E-5:Noisy
(E-5:NOISY)
The noise is too loud.
Keep the room quiet and retry YPAO. If you select
“PROCEED”, YPAO takes the measurement again and
ignores any noise detected.
E-6:Check Sur.
(E-6:CHECK SUR)
Surround back speakers are connected,
but no surround speakers are connected.
Surround speakers need to be connected in order to use
surround back speakers. Exit YPAO, turn off the unit, and
then reconnect the speakers.
E-7:No MIC
(E-7:NO MIC)
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO.
E-8:No Signal
(E-8:NO SIGNAL)
The YPAO microphone cannot detect test
tones.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO. If this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or service center.
E-9:User Cancel
(E-9:CANCEL)
The measurement has been canceled.
Retry or exit YPAO as necessary.
E-10:Internal Err.
(E-10:INTERNAL)
An internal error has occurred.
Exit YPAO, and turn off and on the unit. If this error occurs
repeatedly, contact the nearest authorized Yamaha dealer or
service center.
Exit YPAO, turn off the unit, and then check the speaker
connections.
VOL.
E-5:NOISY
L
SL
SW
C
R
SR
Front display
■ Procedure to handle errors
1
2
Check the content of error message and
press ENTER.
Use the cursor keys (e/r) to select the
desired operation.
To exit the YPAO measurement:
a Select “EXIT” and press ENTER.
b Use the cursor keys (q/w) to select “Exit” and press
ENTER.
• Texts in parentheses denote indicators on the front display.
c Disconnect the YPAO microphone from the unit.
To retry the YPAO measurement from
beginning:
Select “RETRY” and press ENTER.
To proceed with the current YPAO
measurement (for E-5 and E-9 only):
Select “PROCEED” and press ENTER.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
33
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
Auto Setup
Warning message
Cause
W-1:Out of Phase
(W-1:PHASE)
Check the cable connections (+/-) of the problem speaker. If
the speaker is connected incorrectly, exit YPAO, turn off the
A speaker cable may be connected with the unit, and then reconnect the speaker cable.
reverse polarity (+/-).
Depending on the type of speakers or room environment, this
message may appear even if the speakers are connected
correctly. In this case, you can ignore the message.
W-2:Over Distance
(W-2:DISTANCE)
A speaker is placed more than 24 m (80 ft)
from the listening position.
Exit YPAO, turn off the unit, and place the problem speaker
within 24 m (80 ft) of the listening position.
There are significant volume differences
between the speakers.
Check the usage environment and cable connections (+/-) of
each speaker, and the volume of the subwoofer. If there is
any problem, exit YPAO, turn off the unit, and then reconnect
speaker cable or correct the speaker positions. We
recommend using the same speakers or speakers with
specifications that are as similar as possible.
Measurement
Finished
Start
Result
Exit
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK:ENTER
Warning
message
W-1:Out of Phase
Remedy
TV screen
Problem speaker (blinks)
W-3:Level Error
(W-3:LEVEL)
VOL.
W-1:PHASE
L
SL
SW
C
R
SR
Front display
• Texts in parentheses denote indicators on the front display.
■ Procedure to handle warnings
1
Check the content of warning message
and press ENTER.
2
Use the cursor keys (e/r) to select the
desired operation.
To save the measurement results:
Select “SAVE” and press ENTER.
To discard the measurement result:
Select “CANCEL” and press ENTER.
3
Disconnect the YPAO microphone from the
unit.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
34
PLAYBACK
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
4
5
A
MHL
Input selection keys
Basic playback procedure
AV
4
5
6
V-AUX
USB
NET
B
ZONE
1
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
OPTION
SETUP
Refer to the instruction manual for the external device.
VOLUME
ENTER
RETURN
VOLUME
For details on the following operations, see the
corresponding pages.
MUTE
• Listening to FM/AM radio (p.43)
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
MODE
• Playing back iPod music (p.47)
1
2
3
4
5
6
7
8
9
0
10
• Playing back music stored on a USB storage device
(p.51)
• Playing back music stored on media servers (PCs/NAS)
(p.54)
ENT
TV
INPUT
TV VOL
TV CH
• Listening to Internet radio (p.57)
MUTE
• Playing back iTunes/iPod music via a network (AirPlay)
(p.59)
4
Press VOLUME to adjust the volume.
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the “Option” menu or TONE
CONTROL on the front panel (p.65).
PLAYBACK ➤ Basic playback procedure
En
35
Selecting the input source and favorite settings with one touch (SCENE)
CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
HDMI
1
2
3
4
MHL
1
2
3
5
Input selection keys
AV
4
5
6
A
V-AUX
USB
NET
B
The SCENE function allows you to select the assigned input source,
sound program, Compressed Music Enhancer on/off, and target
zones (HTR-5066 only) with just one touch.
1
ZONE
AUDIO
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
1
The input source and settings registered to the
corresponding scene are selected. The unit turns on
automatically when it is in standby mode.
TUNER
FM
Press SCENE.
Configuring scene assignments
TUNING
• Select an input source (p.35)
• Select a sound program (p.37)
• Enable/disable Compressed Music Enhancer (p.42)
SUR. DECODE STRAIGHT
ENHANCER
By default, the following settings are registered for each scene.
DIRECT
• (HTR-5066 only)
Enable/disable the audio output to Zone A/B (p.62)
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
SCENE
OPTION
SETUP
Input
Sound
program
Compressed Target zone
Music
(HTR-5066
Enhancer
only)
VOLUME
ENTER
RETURN
SCENE
DISPLAY
TOP
MENU
POP-UP
MENU
BD/DVD
HDMI 1
MOVIE
(Sci-Fi)
Off
MUTE
SCENE
link
playback
Zone A:
enabled
Zone B:
disabled
On
On
2
2
3
4
5
6
7
8
9
0
SETComplete
10
TV
AV 4
STRAIGHT
On
Zone A:
enabled
Zone B:
disabled
NET
NET
RADIO
MUSIC
(7ch/5ch
Stereo*)
On
Zone A:
enabled
Zone B:
disabled
Off
RADIO
MUSIC
TUNER (7ch/5ch
Stereo*)
On
Zone A:
enabled
Zone B:
disabled
Off
ENT
TV
INPUT
TV VOL
TV CH
MUTE
Hold down the desired SCENE key until “SET
Complete” appears on the front display.
VOL.
MODE
1
Perform the following operations to prepare the
settings you want to assign to a scene.
3
L
SL
SW
C
R
SR
If you want to control the corresponding playback
device after selecting the scene, hold down the
corresponding SCENE key and input selection key
together for more than 3 seconds.
Once the setting is completed successfully, SOURCE/RECEIVER
blinks twice.
• If you have not registered the remote control code of the playback device yet, see
“Registering the remote control codes for playback devices” (p.86) to register it.
* HTR-5066: 7ch Stereo, HTR-4066: 5ch Stereo
• The SCENE link playback function allows you to automatically turn on the TV or
start playback of an external device connected to the unit via HDMI, in conjunction
with a scene selection. To enable SCENE link playback, set “SCENE” (p.75) in the
“Setup” menu to “On”.
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE)
En
36
Selecting the sound mode
CODE SET
SOURCE RECEIVER
The unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with
your favorite sound mode (such as sound field effect or stereo
playback).
HDMI
1
2
3
4
MHL
1
2
3
5
4
5
6
A
V-AUX
USB
NET
AV
B
❑ Selecting a sound program suitable for movies
ZONE
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
OPTION
SETUP
• Press MOVIE repeatedly.
MOVIE
MUSIC
SUR.DECODE
STRAIGHT
DIRECT
ENHANCER
This mode lets you enjoy sound field effects optimized for viewing
video sources, such as movies, TV programs, and games (p.38).
• You can also switch the sound programs and surround decoder by pressing
PROGRAM on the front panel.
• The sound mode can be applied separately to each input source.
• When you play back audio signals with a sampling rate of higher than 96 kHz or
playing back DTS Express, the straight decode mode (p.40) is automatically
selected.
• You can check which speakers are currently outputting sound by looking at the
speaker indicators on the unit’s front panel (p.8).
❑ Selecting a sound program suitable for music or
stereo playback
• Press MUSIC repeatedly.
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
This mode lets you enjoy sound field effects optimized for listening
music sources or stereo playback (p.39).
MUTE
❑ Selecting a surround decoder
MODE
• Press SUR.DECODE repeatedly.
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
MUTE
TV CH
This mode lets you enjoy unprocessed multichannel playback from
2-channel sources (p.41).
ENT
❑ Switching to the straight decode mode
• Press STRAIGHT.
This mode lets you enjoy unprocessed sounds in original channels
(p.40).
❑ Switching to the direct playback mode
• Press DIRECT.
This mode lets you enjoy pure high fidelity sound by reducing the
electrical noise from other circuitry (p.41).
❑ Enabling Compressed Music Enhancer
• Press ENHANCER.
This mode lets you enjoy compressed music with additional depth
and breadth (p.42).
PLAYBACK ➤ Selecting the sound mode
En
37
Enjoying sound field effects (CINEMA DSP)
The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP
technology (CINEMA DSP). It allows you to easily create sound fields like actual movie
theaters or concert halls in your room.
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
Mono Movie
This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
pleasant space with depth, by adding breadth and the appropriate
reverberation to the original audio.
Sports
This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
voices are positioned clearly at the center, while the atmosphere inside the
stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
Sound program category
“CINEMA DSP” lights up
VOL.
Sci-Fi
L
SL
SW
C
R
SR
Sound program
• When you play back DTS-HD sources, the DTS decoder is automatically selected.
• You can adjust the sound field effect level in “DSP Level” (p.65) in the “Option” menu.
■ Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
such as Dolby Digital and DTS. Its design is based on the concept of the
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range, providing
everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
powerful space expanded widely to the left and right. The restrained depth
creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
PLAYBACK ➤ Selecting the sound mode
En
38
■ Sound programs suitable for music/stereo playback
(MUSIC)
The following sound programs are optimized for listening to music sources.
You can also select stereo playback.
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The listener’s
virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts, as
if you were there yourself. Immerse yourself in the hot concert atmosphere
thanks to the vividness of the singers and solos on stage, a presence
sound field that emphasizes the beat of rhythm instruments, and a surround
sound field that reproduces the space of a big live hall.
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA DSP).
7ch Stereo
5ch Stereo
(HTR-5066: 7ch Stereo, HTR-4066: 5ch Stereo)
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
PLAYBACK ➤ Selecting the sound mode
En
39
CODE SET
SOURCE RECEIVER
■ Enjoying stereoscopic sound fields
(CINEMA DSP 3D)
Enjoying unprocessed playback
CINEMA DSP 3D creates a natural stereoscopic sound field in your
room.
■ Playing back in original channels
(straight decode)
HDMI
1
2
3
4
2
3
5
You can play back input sources without any sound field effect
processing.
MHL
1
AV
4
5
6
A
V-AUX
USB
NET
B
CINEMA DSP 3D functions when both of the following conditions
are met.
ZONE
AUDIO
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
SUR. DECODE STRAIGHT
STRAIGHT
ENHANCER
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
• “CINEMA DSP 3D Mode” (p.75) in the “Setup” menu is set to
“On”.
1
VOL.
VOLUME
ENTER
RETURN
TOP
MENU
POP-UP
MENU
1
2
3
4
5
6
7
8
9
0
10
TV
TV VOL
MUTE
TV CH
L
SL
SW
C
VOL.
R
SR
MUTE
MODE
INPUT
3
Hall in Vienna
DISPLAY
ENT
Press STRAIGHT.
Each time you press the key, the straight decode mode is
enabled or disabled.
“CINEMA DSP n” lights up
OPTION
SETUP
• One of the sound programs (except 2ch Stereo and 7ch/5ch
Stereo) is selected (p.38).
When the straight decode mode is enabled, the unit produces
stereo sound from the front speakers for 2-channel sources such as
CDs, and produces unprocessed multichannel sounds for
multichannel sources.
■ Enjoying sound field effects without
surround speakers (Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and
7ch/5ch Stereo) when no surround speakers are connected, the
unit automatically creates the surround sound field using the
front-side speakers.
STRAIGHT
L
SL
SW
C
R
SR
• (HTR-5066 only)
To enable 6.1/7.1-channel playback from 5.1-channel sources when surround
back speakers are used, set “Extended Surround” (p.65) in the “Option” menu to a
setting other than “Off”.
PLAYBACK ➤ Selecting the sound mode
En
40
■ Playing back 2-channel sources in
multichannel (surround decoder)
CODE SET
SOURCE RECEIVER
The surround decoder enables unprocessed multichannel
playback from 2-channel sources. When a multichannel source is
input, it works the same way as the straight decode mode.
HDMI
1
2
3
1
2
3
4
5
A
MHL
AV
4
5
6
V-AUX
USB
NET
For details on each decoder see “Glossary” (p.97).
B
1
ZONE
AUDIO
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
Press SUR.DECODE to select a surround decoder.
Each time you press the key, the surround decoder
changes.
TUNING
SUR. DECODE STRAIGHT
SUR.DECODE
ENHANCER
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
ProLogic
bPro Logic
bPLIIx Movie*
bPLIIx Music*
2
3
4
5
6
7
8
9
0
10
ENT
Press DIRECT.
Each time you press the key, the direct playback mode is
enabled or disabled.
VOL.
bPLII Music
1
1
VOL.
bPLII Movie
MODE
When the direct playback mode is enabled, the unit plays back the
selected source with the least circuitry in order to reduce the
electrical noise from other circuitry (such as the front display). It
allows you to enjoy Hi-Fi sound quality.
DIRECT
L
SL
SW
C
R
SR
OPTION
SETUP
Enjoying pure high fidelity sound
(direct playback)
bPLII Game
DIRECT
L
SL
SW
C
R
SR
Uses the Dolby Pro Logic decoder suitable for all
sources.
Use the Dolby Pro Logic II decoder (or Dolby Pro
Logic IIx decoder) suitable for movies.
Use the Dolby Pro Logic II decoder (or Dolby Pro
Logic IIx decoder) suitable for music.
• When the direct playback mode is enabled, the following functions are not
available.
– Selecting sound programs
– Adjusting the tone control
– Operating the on-screen and “Option” menus
– Viewing information on the front display (when not in operation)
bPLIIx Game*
Use the Dolby Pro Logic II decoder (or Dolby Pro
Logic IIx decoder) suitable for games.
Neo: 6 Cinema
Uses the DTS Neo: 6 decoder suitable for movies.
Neo: 6 Music
Uses the DTS Neo: 6 decoder suitable for music.
TV
INPUT
TV VOL
MUTE
TV CH
* HTR-5066 only
(HTR-5066 only)
• You cannot select the Dolby Pro Logic IIx decoders when headphones are
connected or when “Surround Back” in the “Setup” menu is set to “None”.
• You can adjust the surround decoder parameters in “DSP Parameter” (p.75)
in the “Setup” menu.
PLAYBACK ➤ Selecting the sound mode
En
41
Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
4
5
A
MHL
AV
4
5
6
V-AUX
USB
NET
Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.
B
ZONE
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
ENHANCER
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
1
Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
OPTION
SETUP
“ENHANCER” lights up
VOLUME
ENTER
ENHANCER
RETURN
VOL.
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
Enhancer On
L
SL
SW
C
R
SR
MODE
1
2
3
4
5
6
7
8
9
0
10
ENT
• Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling rate is over 48 kHz
– High-definition streaming audio
TV
INPUT
TV VOL
TV CH
MUTE
• You can also use “Enhancer” (p.66) in the “Option” menu to enable/disable
Compressed Music Enhancer.
Enjoying surround sound with headphones
(SILENT CINEMA)
You can enjoy surround or sound field effects, like a multichannel
speaker system, with stereo headphones by connecting the
headphones to the PHONES jack and selecting a sound program
or a surround decoder.
PLAYBACK ➤ Selecting the sound mode
En
42
Listening to FM/AM radio
CODE SET
SOURCE RECEIVER
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
HDMI
1
2
3
4
MHL
1
2
3
5
AV
4
5
6
A
V-AUX
USB
NET
B
ZONE
FM
AM
AUDIO
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
TUNING
• The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in U.K. and Europe models.
ENHANCER
Setting the frequency steps
DIRECT
TV
NET
RADIO
OPTION
SETUP
VOLUME
ENTER
RETURN
DISPLAY
Press FM or AM to select a band.
VOL.
FM87.50MHz
2
SW
C
R
L
SL
SR
SBL
SBR
Use the following keys to set a frequency.
(Asia and General models only)
TUNING: Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
At the factory, the frequency step setting is set to 50 kHz for FM and
9 kHz for AM. Depending on your country or region, set the
frequency steps to 100 kHz for FM and 10 kHz for AM.
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
SCENE
BD
DVD
1
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
SUR. DECODE STRAIGHT
SLEEP
Selecting a frequency for reception
VOL.
TOP
MENU
POP-UP
MENU
MUTE
MODE
MODE
1
2
3
4
5
6
7
8
9
0
10
1
2
Numeric keys
STEREO
TUNED
Set the unit to standby mode.
When holding down STRAIGHT on the front panel,
press z (power).
L
SL
SW
C
R
SR
“TUNED” lights up when a signal is received from a radio
station.
“STEREO” also lights up when a stereo signal is received.
z (power)
ENT
FM98.50MHz
TV
INPUT
TV VOL
TV CH
MUTE
• “Wrong Station!” appears when you enter a frequency that is out of
reception range.
PROGRAM
3
STRAIGHT
Press PROGRAM repeatedly to select “TU”.
• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception by pressing MODE. When the signal reception for an FM
radio station is unstable, switching to monaural may improve it.
• You can watch videos input from external devices while listening to radio by
selecting the video input jack in “Video Out” (p.67) in the “Option” menu.
TUFM50/AM9
4
5
Press STRAIGHT to select “FM100/AM10”.
Press z (power) to set the unit to standby mode
and turn it on again.
PLAYBACK ➤ Listening to FM/AM radio
En
43
Registering favorite radio stations (presets)
CODE SET
• To specify the preset number from which to start the registration, press
PRESET or cursor keys (q/w) to select a preset number within 5 seconds
after step 4 (while “READY” is displayed) and then press ENTER (or just
wait for 5 seconds).
SOURCE RECEIVER
You can register up to 40 radio stations as presets. Once you have
registered stations, you can easily tune into them by selecting their
preset numbers.
HDMI
1
2
3
4
2
3
5
A
MHL
1
• To cancel the Auto Preset process, press RETURN.
AV
4
5
6
V-AUX
USB
NET
B
ZONE
FM
AM
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
MEMORY
PRESET
■ Registering radio stations automatically
(Auto Preset)
• To register AM radio stations, follow “Registering a radio station manually”.
SCENE
TV
NET
RADIO
OPTION
SETUP
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
2
3
5
6
7
9
0
10
Cursor keys
ENTER
RETURN
• (U.K. and Europe models only)
Only Radio Data System broadcasting stations are stored automatically by the
Auto Preset function.
1
Press FM or AM to select “TUNER” as the input
source.
2
3
Press OPTION.
MUTE
MODE
1
4
8
Use the cursor keys to select “Auto Preset”.
ENT
VOL.
TV
INPUT
TV VOL
AutoPreset
DIRECT
SLEEP
RETURN
VOL.
Automatically register FM radio stations with strong signals (up to
40 stations).
SUR. DECODE STRAIGHT
ENHANCER
BD
DVD
When the Auto Preset process finishes, “FINISH” appears and the
“Option” menu closes automatically.
AutoPreset
TV CH
MUTE
■ Registering a radio station manually
Select a radio station manually and register it to a preset number.
1
Follow “Selecting a frequency for reception” (p.43)
to tune into the desired radio station.
2
Hold down MEMORY for more than 2 seconds.
The first time that you do register a station, the selected
radio station will be registered to the preset number “01”.
Thereafter, each radio station you select will be registered
to the next empty (unused) preset number after the most
recently registered number.
VOL.
STEREO
TUNED
4
To start the Auto Preset process, press ENTER.
The registration will start in 5 seconds. Press ENTER again
to start the registration immediately.
“SEARCH” appears during Auto Preset
VOL.
01:FM98.50MHz
SW
C
R
SR
Preset number
• To select a preset number for registering, press MEMORY once after tuning
into the desired radio station, press PRESET to select a preset number, and
then press MEMORY again.
01:FM87.50MHz
Preset number from which to start the registration
L
SL
VOL.
STEREO
TUNED
02:Empty
L
SL
SW
C
R
SR
“Empty” (not in use) or the frequency currently registered
PLAYBACK ➤ Listening to FM/AM radio
En
44
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
4
5
A
MHL
■ Selecting a preset station
■ Clearing preset stations
Tune into a registered radio station by selecting its preset number.
Clear radio stations registered to the preset numbers.
1
Press FM or AM to select “TUNER” as the input
source.
1
Press FM or AM to select “TUNER” as the input
source.
2
Press PRESET repeatedly to select the desired radio
station.
2
3
Press OPTION.
AV
4
5
6
V-AUX
USB
NET
B
ZONE
FM
AM
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
PRESET
ENHANCER
PRESET
DIRECT
NET
RADIO
OPTION
SETUP
L
SL
SW
C
ClearPreset
R
SR
OPTION
VOLUME
ENTER
VOL.
VOL.
STEREO
TUNED
01:FM98.50MHz
SCENE
TV
RETURN
Use the cursor keys to select “Clear Preset” and
press ENTER.
SUR. DECODE STRAIGHT
SLEEP
BD
DVD
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
DISPLAY
Cursor keys
ENTER
• “No Presets” appears when no radio stations are registered.
4
Use the cursor keys (q/w) to select a preset station
to be cleared and press ENTER.
• “Wrong Num.” appears when an invalid number is entered.
TOP
MENU
POP-UP
MENU
• “Empty” appears when a preset number not in use is entered.
MUTE
VOL.
STEREO
TUNED
01:FM98.50MHz
MODE
1
2
3
4
5
6
7
8
9
0
10
L
SL
SW
C
R
SR
Preset station to be cleared
Numeric keys
If the preset station is cleared, “Cleared” appears and then
the next in-use preset number is displayed.
ENT
TV
INPUT
TV VOL
TV CH
VOL.
MUTE
01:Cleared
L
SL
SW
C
R
SR
5
Repeat step 4 until all desired preset stations are
cleared.
6
To exit from the menu, press OPTION.
PLAYBACK ➤ Listening to FM/AM radio
En
45
Radio Data System tuning
CODE SET
• “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not
displayed if the radio station does not provide the Radio Data System
service.
SOURCE RECEIVER
(U.K. and Europe models only)
HDMI
1
2
3
1
2
3
5
Radio Data System is a data transmission system used by FM
stations in many countries. The unit can receive various types of
Radio Data System data, such as “Program Service”, “Program
Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio
Data System broadcasting station.
4
MHL
AV
4
5
6
A
V-AUX
USB
NET
B
ZONE
AUDIO
TUNER
FM
AM
PRESET
TUNING
INFO
INFO
MEMORY
MOVIE
MUSIC
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
1
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
OPTION
SETUP
DISPLAY
TOP
MENU
POP-UP
MENU
Tune into the desired Radio Data System
broadcasting station.
OPTION
VOLUME
ENTER
RETURN
■ Displaying the Radio Data System
information
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
Cursor keys
ENTER
RETURN
• We recommend using “Auto Preset” to tune into the Radio Data System
broadcasting stations (p.44).
2
Press INFO.
INFO
1
When “TUNER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Traffic Program”
(TrafficProgram) and press ENTER.
The traffic information station search will start in 5 seconds.
Press ENTER again to start the search immediately.
• To search upward/downward from the current frequency, press the cursor
keys (q/w) while “READY” is displayed.
VOL.
STEREO
TUNED
ProgramType
L
SL
SW
C
R
SR
ENT
• To cancel the search, press RETURN.
• Texts in parentheses denote indicators on the front display.
TV
MUTE
When “TUNER” is selected as the input source, the unit
automatically receives traffic information. To enable this function,
follow the procedure below to set the traffic information station.
Each time you press the key, the displayed item changes.
Item name
INPUT
TV VOL
■ Receiving traffic information
automatically
TV CH
About 3 seconds later, the corresponding information for
the displayed item appears.
9850
VOL.
CLASSICS
SW
C
FINISH
VOL.
STEREO
TUNED
TPFM101.30MHz
STEREO
TUNED
L
SL
The following screen appears for about 3 seconds when the
search finishes.
L
SL
SW
C
R
SR
R
SR
Traffic information station (frequency)
Information
Program Service Program service name
Program Type
Current program type
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
• “TP Not Found” appears for about 3 seconds when no traffic information
stations are found.
PLAYBACK ➤ Listening to FM/AM radio
En
46
Playing back iPod music
You can play back iPod music on the unit using a USB cable
supplied with the iPod.
Connecting an iPod
Connect your iPod to the unit with the USB cable supplied with the
iPod.
• An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
• To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)
is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect
your TV and the unit with a video pin cable (p.22). To select a video, operate the
iPod itself in the simple play mode (p.49).
1
Connect the USB cable to the iPod.
2
Connect the USB cable to the USB jack.
Supported iPod (as of December 2012)
• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod nano (2nd, 3rd, 4th, 5th and 6th generation)
• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
• iPad (3rd generation), iPad 2, iPad
The unit (front)
RADIO
VIDEO AUX
STRAIGHT
AUDIO
USB
VIDEO
5V
2.1A
VOL.
Connected
L
SL
SW
C
R
SR
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours.
If “Network Standby” (p.81) in the “Setup” menu is set to “On”, it continues to
change without limit.
• Disconnect the iPod from the USB jack when it is not in use.
PLAYBACK ➤ Playing back iPod music
En
47
Playback of iPod content
CODE SET
SOURCE RECEIVER
Follow the procedure below to operate the iPod contents and start
playback.
HDMI
1
2
3
4
• To return to the previous screen, press RETURN.
• To switch between the browse and playback screens during playback, press
DISPLAY.
MHL
1
2
3
5
4
5
6
A
V-AUX
USB
NET
You can control the iPod with the menu displayed on the TV screen.
AV
B
USB
• Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display, or directly
operate the iPod itself in the simple play mode (p.49).
ZONE
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
1
DIRECT
SLEEP
TV
NET
4
iPod
Music
Press USB to select “USB” as the input source.
2
RADIO
Playlists
Artists
Albums
Songs
Genres
Composers
5
OPTION
SETUP
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
3
iPod
Top
Cursor keys
ENTER
RETURN
Music
Videos
1/6
[DISPLAY] to Now Playing
1 List name
DISPLAY
2 Contents list
MODE
Displays the list of iPod content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
1/2
1
1
The browse screen is displayed on the TV.
SCENE
BD
DVD
■ Browse screen
• “_” (underscore) will be displayed for characters not supported by the unit.
SUR. DECODE STRAIGHT
ENHANCER
• To operate the iPod manually to select content or control playback, switch to the
simple play mode (p.49).
2
3
5
6
7
9
0
10
4
3 Item number/total
8
4 Status indicators
ENT
TV
INPUT
TV VOL
• If playback is ongoing on your iPod, the playback screen is displayed.
TV CH
MUTE
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
Display the current repeat/shuffle settings (p.50) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Icon
Function
Moves 10 pages backward.
Moves to the previous page of the list.
iPod
Now Playing
Moves to the next page of the list.
Artist Name
Album Name
Song Title
2:30
[DISPLAY] to List Browse
Moves 10 pages forward.
5:10
Moves to the playback screen.
PLAYBACK ➤ Playing back iPod music
En
48
■ Playback screen
CODE SET
SOURCE RECEIVER
1
HDMI
1
2
3
2
3
4
1
iPod
Now Playing
MHL
1
■ Operating the iPod itself or remote control
(simple play)
5
4
5
6
A
V-AUX
USB
NET
B
Album Name
2
Song Title
2:30
ZONE
Press MODE to switch to the simple play mode.
The TV menu screen turns off and iPod operations are
enabled.
Artist Name
AV
5:10
To display the TV menu screen, press MODE again.
AUDIO
TUNER
[DISPLAY] to List Browse
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER
1 Status indicators
DIRECT
Display the current repeat/shuffle settings (p.50) and playback status
(such as play/pause).
SLEEP
SCENE
BD
DVD
TV
NET
2 Playback information
VOLUME
ENTER
RETURN
DISPLAY
D
TOP
MENU
POP-UP
MENU
Cursor keys
ENTER
RETURN
2
3
5
6
7
9
0
10
TV VOL
MUTE
Function
4
Cursor keys
Select an item.
ENTER
Confirms the selection.
Use the following remote control keys to control playback.
RETURN
Returns to the previous screen.
a
Function
External device
operation keys
a
Resumes playback from pause.
MODE
s
Stops playback.
d
Stops playback temporarily.
8
ENT
f
TV
INPUT
Operational remote control
keys
Displays the artist name, album name, song title, and elapsed time/song
length.
External device
operation keys
MUTE
MODE
1
Operate your iPod itself or the remote control to
start playback.
RADIO
OPTION
SETUP
2
TV CH
g
Skips forward/backward.
External device
operation keys
d
Starts playback or stops playback
temporarily.
s
Stops playback.
f
g
h
j
Skips forward/backward.
Searches forward/backward (while holding
down).
h
j
Searches forward/backward (by holding down).
PLAYBACK ➤ Playing back iPod music
En
49
■ Repeat/shuffle settings
CODE SET
You can configure the repeat/shuffle settings of your iPod.
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
4
5
A
MHL
• During simple play, configure the repeat/shuffle settings directly on your iPod or
press MODE to display the TV menu screen and then follow the procedure below.
AV
4
5
6
V-AUX
USB
NET
B
ZONE
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
TUNING
SUR. DECODE STRAIGHT
ENHANCER
1
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
OPTION
SETUP
• To return to the previous screen during menu operations, press RETURN.
OPTION
• Texts in parentheses denote indicators on the front display.
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
Cursor keys
ENTER
RETURN
3
Use the cursor keys (e/r) to select a setting.
MUTE
Item
Setting
Function
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears in the TV screen.
All (All)
Plays back all songs repeatedly. “v”
appears in the TV screen.
Off (Off)
Turns off the shuffle function.
Songs (Songs)
Plays back songs in random order. “x”
appears in the TV screen.
Albums
(Albums)
Plays back albums in random order. “x”
appears in the TV screen.
MODE
MODE
1
2
3
4
5
6
7
8
9
0
10
Repeat
(Repeat)
ENT
TV
INPUT
TV VOL
TV CH
MUTE
Shuffle
(Shuffle)
4
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back iPod music
En
50
Playing back music stored on a USB storage device
CODE SET
SOURCE RECEIVER
You can play back music files stored on a USB storage device on
the unit. Refer to the instruction manuals for the USB storage
device for more information.
HDMI
1
2
3
4
MHL
1
2
3
5
4
5
6
A
V-AUX
USB
NET
AV
B
USB
• If the USB storage device contains many files, it may take time to load the them. In
this case, “Loading...” appears in the front display.
The unit supports USB mass storage class devices (FAT16 or
FAT32 format).
ZONE
• Disconnect the USB storage device from the USB jack when it is not in use.
AUDIO
TUNER
FM
• Stop playback of the USB storage device before disconnect it from the USB jack.
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
• The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC
files, and 48 kHz for other files.
RADIO
• Some features may not be compatible, depending on the model or manufacturer
of the USB storage device.
SLEEP
SCENE
BD
DVD
TV
NET
• The unit supports WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC
files (1- or 2-channel audio only).
OPTION
SETUP
• Digital Rights Management (DRM) contents cannot be played back.
DISPLAY
TOP
MENU
POP-UP
MENU
1
2
3
4
5
6
7
8
You can control the USB memory device with the menu displayed
on the TV screen.
1
Connect the USB storage device to the USB jack.
• Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
The unit (front)
• “_” (underscore) will be displayed for characters not supported by the unit.
1
RADIO
9
10
0
ENT
TV
VIDEO AUX
STRAIGHT
TV VOL
Follow the procedure below to operate the USB storage device
contents and start playback.
MUTE
MODE
INPUT
Playback of USB storage device contents
Connecting a USB storage device
VOLUME
ENTER
RETURN
• You cannot connect the PC to the USB jack of the unit.
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
TV CH
MUTE
AUDIO
VIDEO
5V
2.1A
USB
Top
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
1/12
USB storage device
USB
Connected
• If playback is ongoing on your USB storage device, the playback screen is
displayed.
VOL.
L
SL
SW
C
R
SR
PLAYBACK ➤ Playing back music stored on a USB storage device
En
51
2
CODE SET
SOURCE RECEIVER
■ Browse screen
Use the cursor keys to select an item and press
ENTER.
1
HDMI
1
2
3
2
3
5
If a song is selected, playback starts and the playback
screen is displayed.
4
MHL
1
AV
4
5
6
A
V-AUX
USB
NET
B
2
USB
Now Playing
ZONE
AUDIO
TUNER
FM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
3
Artist Name
AM
4
USB
Top
5
1/12
[DISPLAY] to Now Playing
Album Name
Song Title
SUR. DECODE STRAIGHT
ENHANCER
2:30
1 List name
[DISPLAY] to List Browse
2 Contents list
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
Displays the list of USB storage device contents. Use the cursor keys to
select an item and press ENTER to confirm the selection.
RADIO
OPTION
SETUP
3 Item number/total
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
• To switch between the browse and playback screens during playback, press
DISPLAY.
4 Status indicators
Display the current repeat/shuffle settings (p.53) and playback status
(such as play/pause).
5 Operation menu
2
3
5
6
7
9
0
10
TV
TV VOL
4
8
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Icon
Function
ENT
Moves 10 pages backward.
INPUT
MUTE
DISPLAY
• To return to the previous screen, press RETURN.
• Files not supported by the unit cannot be selected.
MODE
1
Cursor keys
ENTER
RETURN
TV CH
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
52
■ Playback screen
CODE SET
■ Repeat/shuffle settings
You can configure the repeat/shuffle settings for playback of USB
storage device contents.
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
USB
Now Playing
4
MHL
1
5
Artist Name
AV
4
5
6
V-AUX
USB
NET
A
Album Name
Song Title
B
AUDIO
TUNER
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
SUR. DECODE STRAIGHT
ENHANCER
1 Status indicators
TV
NET
RADIO
OPTION
SETUP
OPTION
VOLUME
ENTER
DISPLAY
D
TOP
MENU
POP-UP
MENU
Cursor keys
ENTER
RETURN
MUTE
MODE
External device
operation keys
1
2
3
4
5
6
7
8
9
0
10
ENT
2 Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
External device
operation keys
MUTE
TV CH
• Texts in parentheses denote indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
Item
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
Repeat
(Repeat)
f
TV
INPUT
• To return to the previous screen during menu operations, press RETURN.
Display the current repeat/shuffle settings (p.53) and playback status
(such as play/pause).
DIRECT
SCENE
TV VOL
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
TUNING
SLEEP
RETURN
2
[DISPLAY] to List Browse
FM
BD
DVD
When “USB” is selected as the input source, press
OPTION.
2
2:30
ZONE
1
g
Skips forward/backward.
Shuffle
(Shuffle)
4
Setting
Function
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly. “v” appears on the
TV screen.
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order. “x” appears on
the TV screen.
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
53
Playing back music stored on media servers (PCs/NAS)
CODE SET
SOURCE RECEIVER
2
3
4
MHL
1
2
3
5
A
Playback of PC music contents
You can play back music files stored on your PC or
DLNA-compatible NAS on the unit.
HDMI
1
Follow the procedure below to operate the PC music contents and
start playback.
AV
4
5
6
V-AUX
USB
NET
ZONE
• To use this function, the unit and your PC must be connected to the same router
(p.28). You can check whether the network parameters (such as the IP address)
are properly assigned to the unit in “Information” (p.80) in the “Setup” menu.
TUNING
• The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC
and FLAC files.
B
NET
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
• The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC
files, and 48 kHz for other files.
• Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
• To play back FLAC files, you need to install server software that supports sharing
of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
• “_” (underscore) will be displayed for characters not supported by the unit.
1
OPTION
SETUP
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
ENT
Cursor keys
ENTER
You can control the PC/NAS with the menu displayed on the TV
screen.
Media sharing setup
Press NET repeatedly to select “SERVER” as the
input source.
The browse screen is displayed on the TV.
To play back music files stored on your PC or DLNA-compatible
NAS, first you need to configure the media sharing setting on each
music server.
SERVER
Top
DESKTOP
NAS A
NAS B
NOTE
■ For a PC with Windows Media Player
installed
TV
INPUT
TV VOL
MUTE
TV CH
1
Check that Windows Media Player 11 or later is
installed on your PC.
2
In the media sharing settings, enable media sharing
and allow media to be shared with the device.
■ For a PC or a NAS with other DLNA server
software installed
1/4
• If playback of a music file selected from the unit is ongoing on your PC, the
playback screen is displayed.
2
Use the cursor keys to select a music server and
press ENTER.
Refer to the instruction manual for the device or software and
configure the media sharing settings.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
54
3
CODE SET
SOURCE RECEIVER
Use the cursor keys to select an item and press
ENTER.
■ Browse screen
1
HDMI
1
2
3
2
3
5
If a song is selected, playback starts and the playback
screen is displayed.
4
MHL
1
AV
4
5
6
A
V-AUX
USB
NET
B
2
SERVER
Now Playing
ZONE
AUDIO
TUNER
FM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
3
Artist Name
AM
4
SERVER
NAS A
5
1/14
[DISPLAY] to Now Playing
Album Name
Song Title
SUR. DECODE STRAIGHT
ENHANCER
2:30
1 List name
[DISPLAY] to List Browse
2 Contents list
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
Displays the list of PC content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
RADIO
OPTION
SETUP
3 Item number/total
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
2
3
5
6
7
9
0
10
• To switch between the browse and playback screens during playback, press
DISPLAY.
• Files not supported by the unit cannot be selected.
4 Status indicators
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
TV VOL
4
8
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Icon
Function
ENT
Moves 10 pages backward.
TV
INPUT
MUTE
DISPLAY
• To return to the previous screen, press RETURN.
5 Operation menu
MODE
1
Cursor keys
ENTER
RETURN
TV CH
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
55
■ Playback screen
CODE SET
■ Repeat/shuffle settings
You can configure the repeat/shuffle settings for the playback of PC
music content.
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
SERVER
Now Playing
4
MHL
1
5
Artist Name
AV
4
5
6
V-AUX
USB
NET
A
Album Name
Song Title
B
AUDIO
TUNER
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
SUR. DECODE STRAIGHT
ENHANCER
1 Status indicators
TV
NET
RADIO
OPTION
SETUP
OPTION
VOLUME
ENTER
DISPLAY
D
TOP
MENU
POP-UP
MENU
Cursor keys
ENTER
RETURN
MUTE
2 Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
External device
operation keys
External device
operation keys
2
3
4
5
6
7
8
9
0
10
3
Use the cursor keys (e/r) to select a setting.
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
Repeat
(Repeat)
ENT
f
TV
TV CH
g
Setting
Function
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly. “v” appears on the
TV screen.
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order. “x” appears on
the TV screen.
Function
a
INPUT
MUTE
• Text in parentheses denotes indicators on the front display.
Item
MODE
1
• To return to the previous screen during menu operations, press RETURN.
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
DIRECT
SCENE
TV VOL
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
TUNING
SLEEP
RETURN
2
[DISPLAY] to List Browse
FM
BD
DVD
When “SERVER” is selected as the input source,
press OPTION.
2
2:30
ZONE
1
Skips forward/backward.
Shuffle
(Shuffle)
• You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.81).
4
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
56
Listening to Internet radio
CODE SET
SOURCE RECEIVER
You can listen to Internet radio stations from all over the world.
HDMI
1
2
3
4
You can control the Internet radio with the menu displayed on the
TV screen.
MHL
1
2
3
5
A
AV
4
5
6
V-AUX
USB
NET
B
1
Press NET repeatedly to select “NET RADIO” as the
input source.
The browse screen is displayed on the TV.
NET
ZONE
• Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
AUDIO
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
SUR. DECODE STRAIGHT
ENHANCER
• The unit uses the vTuner Internet radio station database service.
SCENE
TV
NET
RADIO
• This service may be discontinued without notice.
OPTION
SETUP
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
Bookmarks
Locations
Genres
New Stations
Popular Stations
Podcasts
Help
• You may not be able to receive some Internet radio stations.
DIRECT
SLEEP
BD
DVD
NET RADIO
Top
• To use this function, the unit must be connected to the Internet (p.28). You can
check whether the network parameters (such as the IP address) are properly
assigned to the unit in “Information” (p.80) in the “Setup” menu.
MUTE
Cursor keys
ENTER
RETURN
DISPLAY
1/7
2
Use the cursor keys to select an item and press
ENTER.
If an Internet radio station is selected, playback starts and
the playback screen is displayed.
MODE
1
2
3
5
6
7
9
0
10
4
8
ENT
NET RADIO
Now Playing
TV
INPUT
TV VOL
MUTE
TV CH
Station Name
Album Name
Song Title
2:30
[DISPLAY] to List Browse
• To return to the previous screen, press RETURN.
• To switch between the browse and playback screens during playback, press
DISPLAY.
• You can register your favorite Internet radio stations to the “Bookmarks” folder by
selecting “NET RADIO” as the input source on the unit and then accessing the
following website with the web browser on your PC. To use this feature, you need
the vTuner ID of the unit and your e-mail address to create your personal account.
You can check the vTunerID (MAC address of the unit) in “Information” (p.80) in
the “Setup” menu.
http://yradio.vtuner.com/
PLAYBACK ➤
Listening to Internet radio
En
57
■ Browse screen
CODE SET
■ Playback screen
SOURCE RECEIVER
1
HDMI
1
2
3
1
2
3
5
AV
4
5
6
A
V-AUX
USB
NET
B
2
ZONE
4
NET RADIO
Top
4
MHL
1
NET RADIO
Now Playing
Bookmarks
Locations
Genres
New Stations
Popular Stations
Podcasts
Help
5
Station Name
2
Album Name
Song Title
2:30
AUDIO
TUNER
FM
3
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
TUNING
SUR. DECODE STRAIGHT
ENHANCER
SCENE
TV
NET
1 List name
1 Playback indicator
2 Contents list
2 Playback information
Displays the list of Internet radio content. Use the cursor keys to select an
item and press ENTER to confirm the selection.
RADIO
OPTION
SETUP
[DISPLAY] to List Browse
DIRECT
SLEEP
BD
DVD
1/7
[DISPLAY] to Now Playing
Displays the station name, album name, song title, and elapsed time.
3 Item number/total
VOLUME
ENTER
RETURN
DISPLAY
D
TOP
MENU
POP-UP
MENU
Cursor keys
ENTER
MUTE
External device
operation keys
2
3
4
5
6
7
8
9
0
10
TV
MUTE
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Icon
Function
Moves 10 pages backward.
ENT
Moves to the previous page of the list.
INPUT
TV VOL
• Some information may not be available depending on the station.
5 Operation menu
MODE
1
• Use the external device operation key (s) to stop playback.
4 Playback indicator
TV CH
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
PLAYBACK ➤
Listening to Internet radio
En
58
Playing back iTunes/iPod music via a network (AirPlay)
The AirPlay function allows you to play back iTunes/iPod music on
the unit via network.
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music
contents on the unit.
iTunes
PC
1
Router
The unit
Starts playback
on iTunes
or iPod
Turn on the unit, and start iTunes on the PC or
display the playback screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon
(
) appears.
iTunes (example)
iPod (example)
Playback starts
iPod
• To use this function, the unit and your PC or iPod must be connected to the same
router (p.28). You can check whether the network parameters (such as the IP
address) are properly assigned to the unit in “Information” (p.80) in the “Setup”
menu.
Supported iTunes/iPod (as of December 2012)
• If the icon does not appear, check whether the unit and PC/iPod are
connected to the router properly.
2
• iTunes 10.2.2 or later (Windows/Mac)
On the iTunes/iPod, click (tap) the AirPlay icon and
select the unit (network name of the unit) as the
audio output device.
• iPod touch, iPhone or iPad with iOS 4.3.3 or later
iTunes (example)
iPod (example)
Network name of the unit
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and
starts playback.
The playback screen is displayed on the TV.
• The playback screen is available only when your TV is connected to the unit via HDMI.
PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay)
En
59
Use the following remote control keys to control playback.
CODE SET
• You can turn on the unit automatically when starting playback on iTunes or iPod by
setting “Network Standby” (p.81) in the “Setup” menu to “On”.
SOURCE RECEIVER
HDMI
1
2
3
4
2
3
5
• You can edit the network name (the unit’s name on the network) displayed on
iTunes/iPod in “Network Name” (p.81) in the “Setup” menu.
MHL
1
• If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
AV
4
5
6
A
V-AUX
USB
NET
B
• You can adjust the unit’s volume from the iTunes/iPod during playback. To disable
volume controls from iTunes/iPod, set “Volume Interlock” (p.67) in the “Option”
menu to “Off”.
ZONE
AUDIO
TUNER
FM
AM
PRESET
MEMORY
MOVIE
MUSIC
ENHANCER
• When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
DIRECT
SCENE
TV
NET
RADIO
OPTION
SETUP
s
Stops playback.
d
Stops playback temporarily.
f
Skips forward/backward.
• To control iTunes playback with the remote control of the unit, you need to
configure the iTunes preferences to enable iTunes control from remote speakers in
advance.
iTunes (example of English version)
■ Playback screen
VOLUME
ENTER
DISPLAY
D
TOP
MENU
POP-UP
MENU
MUTE
1
AirPlay
Now Playing
MODE
External device
operation keys
1
2
3
4
5
6
7
8
Artist Name
Album Name
2
Song Title
2:30
9
Resumes playback from pause.
SUR. DECODE STRAIGHT
SLEEP
RETURN
a
g
TUNING
Function
Caution
INFO
BD
DVD
External device
operation keys
10
0
5:30
ENT
TV
INPUT
TV VOL
TV CH
MUTE
1 Playback indicator
Check this box
2 Playback information
Displays the artist name, album name, song title, and elapsed time/song
length.
PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay)
En
60
Playing back music in multiple rooms (HTR-5066 only)
The Zone A/B function allows you to play back an input source in
the room where the unit is installed (Zone A) and in another room
(Zone B).
For example, you can turn on Zone A (turn off Zone B) when you
are in the living room, and turn on Zone B (turn off Zone A) when
you are in the study room. Also, you can turn on both zones when
you want to enjoy the same input source in those rooms
simultaneously.
Preparing Zone B
Connect the device that will be used in Zone B to the unit.
Caution
• Remove the unit’s power cable from the AC wall outlet before connecting
speakers.
• Ensure that the core wires of the speaker cable do not touch one another or
come into contact with the unit’s metal parts. Doing so may damage the unit
or the speakers. If the speaker cables short circuit, “Check SP Wires” will
appear on the front display when the unit is turned on.
Connect the speakers placed in Zone B to the unit with speaker
cables.
To utilize the SURROUND BACK/BI AMP/ZONE B jacks for Zone B
speakers, set “Power Amp Assign” (p.71) in the “Setup” menu to
“Zone B” after connecting the power cable to an AC wall outlet.
Study room (Zone B)
The unit (rear)
SPEAKERS
PB
FRONT
CENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SINGLE
Y
OR OUT
1
Living room (Zone A)
2
SUBWOOFER
PRE OUT
• Multichannel sources are mixed down to 2 channels and output to the zone B.
• The same input source is applied to both Zone A and Zone B.
• By default, the volume for Zone B changes in conjunction with the volume for Zone
A. If there is volume difference between Zone A/B, you can correct it in “ZoneB
Trim” in the “Option” menu (p.62). Also, you can adjust the volume for Zone B
separately (p.62).
1
1
9
2
2
3
• You can automatically enable/disable the audio output to Zone A/B in conjunction
with a scene selection (p.36)
4
5
Zone B
Zone A
PLAYBACK ➤ Playing back music in multiple rooms (HTR-5066 only)
En
61
■ Basic playback procedure
CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
2
3
Press ZONE A or ZONE B to enable/disable audio
output to Zone A or Zone B.
ZONE A
ZONE B
“SP A” lights up in the front display when the Zone A output
is enabled and “SP B” lights up when the Zone B output is
enabled.
4
MHL
1
2
3
5
4
5
6
A
V-AUX
USB
NET
1
Input selection keys
HDMI
1
AV
B
ZONE
3
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
0.0 dB
AUDIO
TUNER
FM
“SP A” and/or “SP B” light up
AM
PRESET
MEMORY
MUSIC
SP A
SP B
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SCENE (BD/DVD)
SCENE (TV)
RADIO
OPTION
SLEEP
SCENE
BD
DVD
TV
NET
OPTION
SETUP
VOLUME
ENTER
RETURN
VOLUME
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
TV CH
ENT
HDMI1
L
SL
SW
C
• This setting is not effective when “ZoneB Volume” (p.77) in the “Setup” menu is set
to “Async.”.
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
4
Press VOLUME to adjust the volume.
■ Correcting volume difference between
Zone A and Zone B
If you are bothered by volume difference between Zone A/B, follow
the procedure below to adjust the volume for Zone B.
1
2
To exit from the menu, press OPTION.
R
SR
2
MUTE
Cursor keys
ENTER
RETURN
MODE
MUTE
4
TUNING
VOL.
INFO
MOVIE
Use the cursor keys (q/w) to select “ZoneB Trim”
(ZB.Trim) and the cursor keys (e/r) to adjust the
setting.
Press OPTION.
Use the cursor keys to select “Volume Trim”
(Volume Trim) and press ENTER.
You can separately adjust the volume for Zone B using the remote
control when “ZoneB Volume” (p.77) in the “Setup” menu is set to
“Async.”.
1
To set the remote control to the Zone B operation
mode, while holding down the cursor key (r), hold
down SCENE (TV) for more than 3 seconds.
SOURCE/RECEIVER blinks twice.
2
Press VOLUME to adjust the volume for Zone B.
• To mute the audio output to Zone B, press MUTE.
3
• To return to the previous screen during menu operations, press RETURN.
• Text in parentheses denotes indicators on the front display.
■ Adjusting the volume for Zone B
separately
To set the remote control to the Zone A operation
mode, while holding down the cursor key (r), hold
down SCENE (BD/DVD) for more than 3 seconds.
SOURCE/RECEIVER blinks twice.
PLAYBACK ➤ Playing back music in multiple rooms (HTR-5066 only)
En
62
Viewing the current status
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
1
2
3
4
5
A
Switching information on the front display
MHL
AV
4
5
6
V-AUX
USB
NET
1
B
ZONE
AUDIO
TUNER
Press INFO.
Each time you press the key, the displayed item changes.
VOL.
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
AudioDecoder
INFO
SUR. DECODE STRAIGHT
ENHANCER
L
SL
SW
C
R
SR
Item name
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
OPTION
SETUP
About 3 seconds later, the corresponding information for
the displayed item appears.
VOL.
VOLUME
ENTER
RETURN
ProLogic
DISPLAY
TOP
MENU
POP-UP
MENU
L
SL
SW
C
R
SR
Information
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
MUTE
TV CH
ENT
• Available items vary depending on the selected input source. The displayed
item can also be applied separately to each input source group.
Input source group
Item
HDMI 1–5
AV 1–6
AUDIO
V-AUX
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name*)
USB
SERVER
AirPlay
NET RADIO
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
* During simple playback of iPod:
Input (input source name), DSP Program (sound mode
name), Audio Decoder (decoder name)
Song (song title), Album (album name), Station
(station name), DSP Program (sound mode name),
Audio Decoder (decoder name*)
Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name*)
TUNER
* (U.K. and Europe models only)
Radio Data System data is also available when the unit is
tuned into a Radio Data System broadcasting station (p.46).
* The name of the audio decoder currently activated is displayed. If no audio
decoder is activated, “Decoder Off” appears.
PLAYBACK ➤ Viewing the current status
En
63
Configuring playback settings for different playback sources (Option menu)
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Option menu items
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
OPTION
VOL.
ToneControl
L
SL
SW
C
R
SR
• Depending on the region of purchase, some menu items for audio streaming services are also available.
For details, refer to each manual on the supplied CD-ROM.
Item
Function
Tone Control (Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
65
DSP Level
(DSP Level)
Adjusts the sound field effect level.
65
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
65
(HTR-5066 only)
Selects how to play back 5.1- to 7.1-channel sources
when surround back speakers are used.
65
Front display
Option
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info
Audio In
2
TV screen
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer.
66
Use the cursor keys to select an item and press ENTER.
Input Trim
(In.Trim)
Corrects volume differences between input sources.
66
• To return to the previous screen during menu operations, press RETURN.
3
4
DSP/Surround
(DSP/Surround) Extended
Surround
(EXTD)
Page
Use the cursor keys (e/r) to select a setting.
Volume Trim
(Volume Trim)
Subwoofer Trim
Fine-adjusts the subwoofer volume.
(SW.Trim)
66
(HTR-5066 only)
Corrects volume differences between Zone A/B.
62
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
66
Signal Info (Signal Info)
Displays information about the video/audio signal.
66
Audio In (Audio In)
Combines the video jack of the selected input source
with an audio jack of others.
67
Video Out (Video Out)
Selects a video to be output with radio sounds.
67
Auto Preset (Auto Preset)
Automatically registers FM radio stations with strong
signals as presets.
44
Clear Preset (Clear Preset)
Clear radio stations registered to preset numbers.
45
ZoneB Trim
(ZB.Trim)
To exit from the menu, press OPTION.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
64
(U.K. and Europe models only)
Traffic Program (TrafficProgram) Automatically searches for a traffic information
station.
Page
46
Repeat (Repeat)
Configures the repeat setting for the iPod (p.50),
USB storage device (p.53), or media server (p.56).
—
Shuffle (Shuffle)
Configures the shuffle setting for the iPod (p.50),
USB storage device (p.53), or media server (p.56).
—
Volume Interlock (Interlock)
Enables/disables volume controls from iTunes/iPod
via AirPlay.
67
■ Tone Control (Tone Control)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Default
Bypass (Bypass)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.
Settings
On (On)
Automatically adjusts the dynamic range.
Off (Off) (default)
The dynamic range is not automatically adjusted.
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
Volume: low
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
❑ Adaptive DRC (A.DRC)
On
Off
Input level
Volume: high
Output level
Function
Output level
Item
On
Off
Input level
❑ Extended Surround (EXTD)
(HTR-5066 only)
• If you set an extreme value, sounds may not match those from other channels.
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Settings
Adjusting with the front panel controls
a Press TONE CONTROL to select “Treble” or “Bass”.
b Press PROGRAM to make an adjustment.
■ DSP/Surround (DSP/Surround)
Auto (Auto)
(default)
Automatically selects the most suitable decoder if signals that contain
surround back channel signals are input, and reproduces the signals
in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
bPLIIx Movie
(bPLIIxMo)
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
back speakers are connected.
bPLIIx Music
(bPLIIxMu)
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
EX/ES (EX/ES)
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Off (Off)
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
Configures the sound field program and surround settings.
❑ DSP Level (DSP Level)
Adjusts the sound field effect level.
Setting range
-6 dB to +3 dB (1 dB increments)
Default
0 dB
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
65
■ Lipsync (Lipsync)
• Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing
back those sources.
Enables/disables the adjustment configured in “Lipsync” (p.76) in the “Setup” menu.
❑ Enhancer (Enhancer)
• This setting is applied separately to each input source.
Settings
Enables/disables Compressed Music Enhancer (p.42).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.42).
Settings
Off (Off)
Disables Compressed Music Enhancer.
On (On)
Enables Compressed Music Enhancer.
Off (Off)
Disables the “Lipsync” adjustment.
On (On)
Enables the “Lipsync” adjustment.
Default
AirPlay: Off (Off)
Others: On (On)
■ Signal Info (Signal Info)
Displays information about the video/audio signal.
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
Choices
■ Volume Trim (Volume Trim)
Format (FORMAT)
Audio format of the input signal
Channel (CHAN)
The number of source channels in the input signal
(front/surround/LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels,
and LFE.
Fine-adjusts volume difference between input sources or subwoofer volume.
❑ Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Sampling (SAMPL)
The number of samples per second of the input digital signal
Bitrate (B RATE)
The amount of data per second of the input bitstream signal
Input (V IN)
Type and resolution of input signal
Output (V OUT)
Type and resolution of output signal
• This setting is applied separately to each input source.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
• To switch the information on the front display, press the cursor keys (q/w) repeatedly.
Default
0.0 dB
❑ Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
66
■ Audio In (Audio In)
■ Volume Interlock (Interlock)
Combines the video jack of the selected input source (HDMI 1–5 or AV 1–2) with an
audio jack of others. For example, use this function in the following cases.
Enables/disables volume controls from iTunes/iPod via AirPlay.
• Connecting a playback device that supports HDMI video output, but not HDMI audio
output
• Connecting a playback device that has component video jacks and analog stereo
jacks (such as game consoles)
Input sources
HDMI 1–5, AV 1–2
Settings
Off (Off)
Disables volume controls from iTunes/iPod.
Limited (Ltd)
(default)
Enables volume controls from iTunes/iPod within the limited range (-80
dB to 0 dB and mute).
Full (Full)
Enables volume controls from iTunes/iPod in the full range (-80 dB to
+16.5 dB and mute).
■ Setup procedure
(To input audio through a digital optical jack)
Select “AV 1” or “AV 4” and connect the device to the unit’s corresponding audio jacks
with a digital optical cable.
(To input audio through a digital coaxial jack)
Select “AV 2” or “AV 3” and connect the device to the unit’s corresponding audio jacks
with a digital coaxial cable.
(To input audio through analog audio jacks)
Select “AV 5”, “AV 6”, or “AUDIO”, and connect the device to the unit’s corresponding
audio jacks with a stereo pin cable.
■ Video Out (Video Out)
Selects a video to be output with radio sounds.
Settings
Off (Off) (default)
Does not output video.
HDMI 1–5, AV 1–6,
V-AUX
Outputs video input through the corresponding video input jacks.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
67
CONFIGURATIONS
Configuring various functions (Setup menu)
You can configure the unit’s various function with the menu displayed on the TV screen.
• Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry
out operations while viewing the front display.
1
2
Press SETUP.
Use the cursor keys to select a menu and press ENTER.
Setup
Speaker
Configuration
HDMI
Distance
Sound
Level
ECO
Equalizer
Function
Test Tone
Network
Language
3
Use the cursor keys to select an item and press ENTER.
Setup
Speaker
Configuration
HDMI
Distance
Sound
Level
ECO
Equalizer
Function
Test Tone
Network
Language
• To return to the previous screen during menu operations, press RETURN.
4
5
Use the cursor keys (e/r) to select a setting and press ENTER.
To exit from the menu, press SETUP.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
68
Setup menu items
Menu
Item
Configuration
Function
Power Amp Assign
(HTR-5066 only)
Selects a speaker system.
Subwoofer
Selects whether or not a subwoofer is connected.
71
Front
Selects the size of the front speakers.
71
Center
Selects whether or not a center speaker is connected and its size.
71
Surround
Selects whether or not surround speakers are connected and their size.
72
Surround Back
(HTR-5066 only)
Selects whether or not surround back speakers are connected and their size.
72
Crossover
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.
72
Subwoofer Phase
Sets the phase of the subwoofer.
72
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
72
Speaker
HDMI
Page
71
Distance
Sets the distance between each speaker and listening position.
73
Level
Adjusts the volume of each speaker.
73
Equalizer
Adjusts the tone with an equalizer.
73
Test Tone
Enables/disables the test tone output.
73
HDMI Control
Enables/disables HDMI Control.
74
Audio Output
Selects a device to output audio.
74
Standby Through
Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
74
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input.
74
Standby Sync
Selects whether to use HDMI control to link the standby behavior of the TV and the unit.
75
ARC
Enables/disables ARC.
75
SCENE
Enables/disables SCENE link playback.
75
Configuration
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
69
Menu
Item
Page
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D.
75
Panorama
Enables/disables the broadening effect of the front sound field.
75
Center Width
Adjusts the broadening effect of the center sound field.
76
Dimension
Adjusts the difference in level between the front and surround sound fields.
76
Center Image
Adjusts the center orientation level (broadening effect) of the front sound field.
76
Select
Selects the method to adjust the delay between video and audio output.
76
Adjustment
Adjusts the delay between video and audio output manually.
76
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
77
Max Volume
Sets the maximum volume to prevent excessive loudness.
77
Initial Volume
Sets the initial volume for when this receiver is turned on.
77
ZoneB Volume
(HTR-5066 only)
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.
77
Auto Power Standby
Sets the amount of time for the auto-standby function.
77
ECO Mode
Enables/disables the eco mode (power saving mode).
78
Input Rename
Changes the input source name displayed on the front display.
78
Dimmer
Adjusts the brightness of the front display.
79
Prevents accidental changes to the settings.
79
Selects how to supply power through the DC OUT jack.
79
Information
Displays the network information on the unit.
80
IP Address
Configures the network parameters (such as IP address).
80
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
81
DMC Control
Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
81
DSP Parameter
Sound
Function
Lipsync
Volume
ECO
Function
Memory Guard
DC OUT
Network
Language
Power Mode
Network Standby
Selects whether to enable/disable the function that turns on the unit from other network devices.
81
Network Name
Edits the network name (the unit’s name on the network) displayed on other network devices.
81
Network Update
Updates the firmware via the network.
82
Select an on-screen menu language.
82
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
70
❑ Subwoofer
Speaker
Selects whether or not a subwoofer is connected.
Configures the speaker settings manually.
Settings
Setup
Speaker
Configuration
HDMI
Distance
Sound
Level
ECO
Equalizer
Function
Test Tone
Use (default)
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
Network
Language
❑ Front
Selects the size of the front speakers.
■ Configuration
Settings
Configures the output characteristics of the speakers.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
Small (default)
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
❑ Power Amp Assign
(HTR-5066 only)
Selects a speaker system.
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the Zone B speakers or bi-amp connection.
❑ Center
Selects whether or not a center speaker is connected and its size.
Settings
Basic (default)
Select this option when you use a normal speaker system (not using
Zone B speakers or a bi-amp connection).
BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.16).
Zone B
Select this option when you use Zone B speakers (p.61) in addition to
the speaker system in the main zone (Zone A).
Settings
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
71
❑ Surround
❑ Crossover
Selects whether or not surround speakers are connected and their sizes.
Sets the lower limit of the low-frequency components that can be output from a speaker
whose size is set to “Small”. A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers.
Settings
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
❑ Surround Back
Settings
40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
❑ Subwoofer Phase
Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the
subwoofer phase.
Settings
(HTR-5066 only)
Selects whether or not surround back speakers are connected and their sizes.
Settings
Small x1
Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Crossover”).
Small x2 (default)
Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Crossover”).
Large x1
Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back
channel frequency components.
Large x2
Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back
channel frequency components.
None
Select this option when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
Normal (default)
Does not reverse the subwoofer phase.
Reverse
Reverses the subwoofer phase.
❑ Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel
low-frequency components.
• This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.
• “Surround Back” is automatically set to “None” when “Power Amp Assign” is set to “BI-AMP” or “Zone B”, or
when “Surround” is set to “None”.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
72
■ Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
• “PEQ” is available only when the YPAO has been performed (p.31).
■ Manual equalizer adjustment
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L (HTR-5066 only),
Surround Back R (HTR-5066 only), Subwoofer
1
2
Set “EQ Select” to “GEQ”.
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
3
Use the cursor keys (q/w) to select the desired band (frequency) and the cursor
keys (e/r) to adjust the gain.
Default
Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Others: 2.40 m (8.0 ft)
Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select
the desired speaker channel.
Setting range
-6.0 dB to +6.0 dB
Equalizer
■ Level
EQ Select
GEQ Edit
Channel
63Hz
160Hz
400Hz
1kHz
2.5kHz
6.3kHz
16kHz
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L (HTR-5066 only),
Surround Back R (HTR-5066 only), Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
Front L, Front R, Subwoofer: 0.0 dB
Others: -1.0 dB
GEQ
Front L
Back:RETURN
4
To exit from the menu, press SETUP.
■ Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
■ Equalizer
Adjusts the tone with an equalizer.
Settings
❑ EQ Select
Off (default)
Does not output test tones.
Selects the type of equalizer to be used.
On
Outputs test tones automatically when you adjust the speaker balance
or equalizer.
Settings
PEQ
Applies the parametric equalizer values obtained by the YPAO
measurement (p.31).
GEQ (default)
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
Off
Does not use the equalizer.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
73
HDMI
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Configures the HDMI settings.
Setup
Speaker
Settings
Off (default)
Disables the audio output from the TV.
On
Enables the audio output from the TV.
Configuration
HDMI
❑ Standby Through
Sound
ECO
Function
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On”, you can use the input selection
keys (HDMI 1–5) to select an HDMI input even when the unit is in standby mode (the
standby indicator on the unit blinks).
Network
Language
Settings
■ Configuration
❑ HDMI Control
Off (default)
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
Enables/disables HDMI Control (p.100).
Settings
Off (default)
Disables HDMI Control.
• This setting is available only when “HDMI Control” is set to “Off”.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.
❑ TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
• To use HDMI control, you need to perform the HDMI Control link setup (p.100) after connecting HDMI
Control-compatible devices.
Settings
AV 1–6, AUDIO
❑ Audio Output
Default
AV 4
Selects a device to output audio.
• This setting is available only when “HDMI Control” is set to “Off”.
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting
an external device because the input will be used for TV audio input.
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
Off
Disables the audio output from the speakers.
On (default)
Enables the audio output from the speakers.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
74
❑ Standby Sync
Sound
Select whether to use HDMI control to link the standby behavior of the TV and the unit
when “HDMI Control” is set to “On”.
Configures the audio output settings.
Settings
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Auto (default)
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
Setup
Speaker
DSP Parameter
HDMI
Lipsync
Sound
Volume
ECO
Function
Network
Language
❑ ARC
Enables/disables ARC (p.18) when “HDMI Control” is set to “On”.
Settings
Off
Disables ARC.
On (default)
Enables ARC.
■ DSP Parameter
Configures the surround decoder settings.
❑ CINEMA DSP 3D Mode
• You do not need to change this setting normally. In case noises are produced from the speakers connected
to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to
“Off” and use the TV’s speakers.
Enables/disables CINEMA DSP 3D (p.40). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch/5ch
Stereo).
Settings
❑ SCENE
Enables/disable SCENE link playback when “HDMI Control” is set to “On”.
Off
Disables CINEMA DSP 3D.
When SCENE link playback is enabled, HDMI Control-compatible devices connected
to the unit via HDMI automatically works as follows, with a scene selection.
On (default)
Enables CINEMA DSP 3D.
• TV: turning on and displaying video from the playback device
• Playback device: starting playback
Choices (SCENE keys)
BD/DVD, TV, NET, RADIO
Settings
❑ Panorama
Enables/disables the broadening effect of the front sound field. When this function is
enabled, you can wrap front right/left channel sounds around the field and generate a
spacious sound field in combination with the surround sound field. This setting is
effective when “bPLII Music” or “bPLIIx Music” (HTR-5066 only) is selected.
Settings
Off
Disables SCENE link playback for the selected SCENE key.
On
Enables SCENE link playback for the selected SCENE key.
Off (default)
Disables the broadening effect of the front sound field.
On
Enables the broadening effect of the front sound field.
Default
BD/DVD, TV: On
NET, RADIO: Off
• SCENE link playback may not work properly due to the compatibility between devices. We recommend
using TV and playback devices from the same manufacturer so that HDMI Control works more effectively.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
75
❑ Center Width
■ Lipsync
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective
when “bPLII Music” or “bPLIIx Music” (HTR-5066 only) is selected.
Adjusts the delay between video and audio output.
Setting range
0 to 7
Default
3
❑ Dimension
Adjusts the difference in level between the front and surround sound fields. Higher to
strengthen the front sound field and lower to strengthen the surround sound field. This
setting is effective when “bPLII Music” or “bPLIIx Music” (HTR-5066 only) is
selected.
Setting range
-3 to +3
• You can enable/disable the Lipsync function by input sources in “Lipsync” (p.66) in the “Option” menu.
❑ Select
Selects the method to adjust the delay between video and audio output.
Setting range
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Auto (default)
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
Default
0
❑ Center Image
• “Select” is automatically set to “Manual” depending on the TV connected to the unit.
Adjusts the center orientation level (broadening effect) of the front sound field. Higher
to strengthen the center orientation level (less broadening effect) and lower to weaken
(more broadening effect). This setting is effective when “Neo:6 Music” is selected.
❑ Adjustment
Setting range
0.0 to 1.0
Default
0.3
Adjusts the delay between video and audio output manually when “Select” is set to
“Manual”. You can fine-adjust the audio output timing when “Select” is set to “Auto”.
Setting range
0 ms to 250 ms (1 ms increments)
Default
0 ms
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
76
■ Volume
Configures the volume settings.
• If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As necessary,
adjust the volume using the remote control (p.62).
❑ Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
ECO
Configures the power supply settings.
Settings
Maximum (default)
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Min/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
Setup
Speaker
Auto Power Standby
HDMI
ECO Mode
Sound
ECO
Function
Network
Language
❑ Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
■ Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit for
the specified time, the unit will automatically go into standby mode.
Default
+16.5 dB
Settings
❑ Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off (default)
Sets the level to the volume level of the unit when it last entered
standby mode.
Mute
Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
Sets the level to the specified volume level.
(0.5 dB increments)
❑ ZoneB Volume
Off
Does not set the unit to standby mode automatically.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for
the specified time. For example, when “2 hours” is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.
Default
U.K. and Europe models: 8 hours
Other models: Off
• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the
front display.
(HTR-5066 only)
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.
Settings
Sync. (default)
Adjusts the volume for Zone B in conjunction with the volume for
Zone A.
Async.
Does not adjust the volume for Zone B in conjunction with the volume
for Zone A. Adjust the volume for Zone B separately (p.62).
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
77
■ ECO Mode
Function
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Configures the functions that make the unit easier to use.
Settings
Setup
Off (default)
Disables the eco mode.
On
Enables the eco mode.
Speaker
Input Rename
HDMI
Dimmer
Sound
Memory Guard
ECO
DC OUT
Function
Network
Language
• Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the
unit is restarted.
• When “ECO Mode” is set to “On”, the front panel display may become dark.
• If you want to play audio at high volume, set “ECO Mode” to “Off”.
■ Input Rename
Changes the input source name displayed on the front display.
Input sources
HDMI 1–5, AV 1–6, AUDIO, USB, V-AUX
■ Procedure
1
Use the cursor keys (q/w) to select an input source to be renamed and press
ENTER.
• To select a name from the presets, use the cursor keys (q/w) to select an input source and the
cursor keys (e/r) to select a preset name.
2
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
Input Rename
HDMI1
B l u - r a y
OK:ENTER
CANCEL:RETURN
3
To confirm the new name, press ENTER.
• To cancel the entry, press RETURN.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
78
4
5
To change another input source name, repeat steps 1 to 3.
■ DC OUT
To exit from the menu, press SETUP.
Configures the DC OUT jack setting.
❑ Power Mode
■ Dimmer
Selects how to supply power to the Yamaha AV accessory connected to the DC OUT
jack.
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Settings
Default
0
Continuous (default)
Supplies power through the DC OUT jack continuously regardless of
the power state (on/standby) of the unit.
Power Sync.
Supplies power through the DC OUT jack only when the unit is turned
on.
• The front display may become dark when “ECO Mode” (p.78) is set to “On”.
■ Memory Guard
Prevents accidental changes to the settings.
Settings
Off (default)
Does not protect the settings.
On
Protects the settings until “Off” is selected.
• When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
o
Memory Guard
Memory Guard
Icon
On
Back:RETURN
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
79
■ IP Address
Network
Configures the network settings.
Configures the network parameters (such as IP address).
❑ DHCP
Select whether to use a DHCP server.
Setup
Speaker
Information
HDMI
IP Address
Sound
MAC Address Filter
ECO
DMC Control
Function
Network Standby
Network
Network Name
Language
Network Update
Settings
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On (default)
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
■ Manual network settings
■ Information
Displays the network information on the unit.
Status
The connection status of the NETWORK jack
MAC Address
MAC address
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
vTuner ID
The ID of the Internet radio (vTuner)
1
2
Set “DHCP” to “Off”.
Use the cursor keys (q/w) to select a parameter type.
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
4
To exit from the menu, press SETUP.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
80
■ MAC Address Filter
■ Network Standby
Sets the MAC address filter to limit access to the unit from other network devices.
Selects whether the unit can be turned on from other network devices (network
standby).
❑ Filter
Settings
Enables/disables the MAC address filter.
Off (default)
Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Settings
Off (default)
Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
❑ MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted
access to the unit when “Filter” is set to “On”.
3
Edits the network name (the unit’s name on the network) displayed on other network
devices.
■ Procedure
1
2
■ Procedure
1
2
■ Network Name
Use the cursor keys (q/w) to select an MAC address number (1 to 10).
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
Press ENTER to enter the name edit screen.
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
Network Name
To exit from the menu, press SETUP.
Y a m a h a
x x x x x x
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Settings
Disable
Does not allow DMCs to control playback.
Enable (default)
Allows DMCs to control playback.
Back:RETURN
3
4
To confirm the new name, press ENTER.
To exit from the menu, press SETUP.
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
81
■ Network Update
Updates the firmware via the network.
Language
Select an on-screen menu language.
❑ Perform Update
Starts the process to update the unit’s firmware. For details, see “Updating the unit’s
firmware” (p.88).
Setup
Speaker
English
HDMI
日本語
Français
Deutsch
Español
Русский
Italiano
❑ Firmware Version
Sound
Displays the version of the firmware installed on the unit.
Network
ECO
Function
Language
中文
❑ System ID
Displays the system ID number.
Settings
English (default)
English
日本語
Japanese
Français
French
Deutsch
German
Español
Spanish
Russian
Italiano
Italian
Chinese
• Japanese and Chinese characters used in content information (such as song titles) cannot be displayed.
• The information on the front display is provided in English only.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
82
Changing the speaker impedance setting (SP IMP.)
Configuring the system settings
(ADVANCED SETUP menu)
(U.S.A. model only)
Configure the system settings of the unit while viewing the front display.
1
2
SPIMP.8MIN
Set the unit to standby mode.
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
While holding down STRAIGHT on the front panel, press z (power).
Settings
z (power)
PROGRAM
3
4
5
STRAIGHT
6  MIN
Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
8  MIN (default)
Select this option when you connect 8-ohm or higher speakers to the
unit.
Selecting the remote control ID (REMOTE ID)
Press PROGRAM to select an item.
Press STRAIGHT to select a setting.
REMOTEIDID1
Press z (power) to set the unit to standby mode and turn it on again.
The new settings take effect.
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
ADVANCED SETUP menu items
Item
Function
Page
SP IMP.
(U.S.A. model only)
Changes the speaker impedance setting.
83
REMOTE ID
Selects the unit’s remote control ID.
83
TU
(Asia and General models only)
Changes the FM/AM tuning frequency setting.
84
TV FORMAT
Switches the video signal type of HDMI output.
84
■ Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD)
for more than 3 seconds.
To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for
more than 3 seconds.
• The registered remote control codes (p.85) are not cleared even if you change the remote control ID.
INIT
Restores the default settings.
84
UPDATE
Updates the firmware.
84
VERSION
Checks the version of firmware currently installed on the unit.
84
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
83
Changing the FM/AM tuning frequency setting (TU)
Updating the firmware (UPDATE)
(Asia and General models only)
TUFM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz
steps and AM by 10-kHz steps.
FM50/AM9 (default)
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
TVFORMATNTSC
UPDATEUSB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
• If the unit detects newer firmware over the network, the envelope icon (p) will appear in the “Network
Update” screen. In this case, you can also update the unit’s firmware by following the procedure in
“Updating the unit’s firmware” (p.88).
Checking the firmware version (VERSION)
Default
U.S.A., Korea and General models: NTSC
Other models: PAL
Restoring the default settings (INIT)
INITCANCEL
VERSIONxx.xx
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in “Network Update” (p.82) in the “Setup” menu.
• It may take a while until the firmware version is displayed.
Restores the default settings for the unit.
Choices
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
84
CODE SET
SOURCE RECEIVER
CODE SET
You can use the unit’s remote control to operate external devices
(such as BD/DVD players) if you have registered the remote control
code of the external device.
HDMI
1
2
3
4
MHL
1
2
3
5
AV
4
5
6
A
V-AUX
USB
NET
B
ZONE
TUNER
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
NET
• If the unit’s remote control is without batteries for more than 2 minutes, the
registered codes may be cleared. If this happens, insert new batteries and register
the codes again.
If it blinks six times, registration has failed. Repeat from Step 2.
■ TV operations
RADIO
• Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
function may not work depending on the specification of the external device.)
OPTION
SETUP
VOLUME
ENTER
RETURN
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is successfully registered,
SOURCE/RECEIVER blinks twice.
SCENE
TV
Press TV z.
• Ensure that the remote control ID of the external device is set to “ID1”. If any other
ID is selected, the remote control operations may not work properly.
SLEEP
BD
DVD
3
4
• You cannot control an external device that does not have a remote control sensor.
AUDIO
FM
Controlling external devices with the remote control
SOURCE/RECEIVER
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
Registering the remote control code for a TV
MODE
1
2
3
4
5
6
7
8
9
0
10
You can use the unit’s remote control to operate a TV if you have
registered its remote control code.
Numeric keys
TV operation keys
INPUT
Switches the video inputs of the TV.
MUTE
Mutes the audio output of the TV.
TV VOL
Adjust the volume of the TV.
TV CH
Switch the channels of the TV
TV z
Turns on/off the TV.
ENT
TV
INPUT
TV VOL
MUTE
TV CH
TV operation keys
TV z
• You can also register your TV’s remote control code to the unit’s input selection
keys (p.86). This would allow you to use the cursor keys or numeric keys to
operate the TV (this function may not be available on some TV models).
1
Use “Remote Control Code Search” in the CD-ROM
to find your TV’s remote control code.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
85
CODE SET
SOURCE RECEIVER
SOURCE z
CODE SET
SOURCE/RECEIVER
Registering the remote control codes for
playback devices
HDMI
1
2
3
1
2
3
4
5
A
MHL
Input selection keys
AV
4
5
6
V-AUX
USB
NET
B
ZONE
AUDIO
You can use the unit’s remote control to operate playback devices if
you have registered their remote control codes. You can also use
the input selection keys to change the playback devices that are
controlled by the remote control, because their remote control
codes are assigned to the input selection keys.
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
• (HTR-4066 only)
If you assign the remote control code for an external device to the star (★ or ★★)
key, you can operate the device with the remote control without switching the input
source after pressing the star key.
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
SLEEP
■ Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
• By pressing SOURCE/RECEIVER, you can switch the devices (the unit or
external device) that are operated by the menu operation keys, DISPLAY and
numeric keys. You can operate the unit when SOURCE/RECEIVER lights up in
orange, and an external device when SOURCE/RECEIVER lights up in green.
For example, if you register the remote control code of your BD/DVD player on
HDMI 1, you can operate the unit when SOURCE/RECEIVER lights up in orange,
and the BD/DVD player when SOURCE/RECEIVER lights up in green.
SOURCE z
Turns on/off the playback device.
SCENE
BD
DVD
TV
NET
RADIO
1
OPTION
SETUP
VOLUME
ENTER
RETURN
Menu operation keys
Use “Remote Control Code Search” in the CD-ROM
to find the remote control code for your playback
device.
POP-UP
MENU
1
2
3
4
External device
operation keys
DISPLAY
5
6
7
8
Numeric keys
9
0
10
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
ENT
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
External device
operation keys
SOURCE/RECEIVER blinks twice.
TV
TV operation keys
TV VOL
ENTER
Confirms a selected item.
RETURN
MUTE
MODE
INPUT
Select an item.
DISPLAY
DISPLAY
D
TOP
MENU
Menu operation
keys
Cursor keys
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
TV CH
MUTE
3
4
Returns to the previous screen.
Switches information on the display.
TOP MENU
Displays the top menu.
POP-UP
MENU
Displays the pop-up menu.
s
Stops playback.
d
Stops playback temporarily.
a
Starts playback of the selected
song/video.
h
j
Searches forward/backward (by
holding down).
f
Press the input selection key.
For example, press HDMI 1 to set the remote control code
for the playback device connected to the HDMI 1 jack.
g
Skips forward/backward.
Numeric keys
Enter numerical values.
TV operation keys
Control the TV (p.85).
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is registered successfully,
SOURCE/RECEIVER blinks twice.
• These keys work only if the corresponding function is available on your playback
device and if the device can be operated with an infrared remote control.
If it blinks six times, registration has failed. Repeat from Step 2.
• For details on how to register a remote control code to a SCENE key, refer to
“Configuring scene assignments” (p.36).
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
86
CODE SET
SOURCE RECEIVER
CODE SET
SOURCE/RECEIVER
HDMI
1
2
3
4
2
3
5
MHL
1
Input selection keys
4
5
6
A
USB
NET
B
You can reset a remote control code registered to each input
selection key.
1
AV
V-AUX
Resetting remote control codes
ZONE
SOURCE/RECEIVER blinks twice.
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
TUNING
SUR. DECODE STRAIGHT
ENHANCER
DIRECT
2
3
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
OPTION
SETUP
VOLUME
ENTER
RETURN
POP-UP
MENU
Press the input selection key.
Use the numeric keys to enter “5098”.
Once the remote control code is reset successfully,
SOURCE/RECEIVER blinks twice.
DISPLAY
TOP
MENU
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
MUTE
If it blinks six times, resetting has failed. Repeat from Step 1.
MODE
To reset the remote control to factory default settings
1
2
3
4
5
6
7
8
9
0
10
ENT
a Press CODE SET using a pointed object such as the tip of a ballpoint pen.
Numeric keys
b Press SOURCE/RECEIVER.
c Use the numeric keys to enter “9981”.
TV
INPUT
TV VOL
TV CH
MUTE
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
87
Updating the unit’s firmware via the network
CODE SET
SOURCE RECEIVER
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
HDMI
1
2
3
4
MHL
1
2
3
5
4
5
6
A
V-AUX
USB
NET
AV
B
ZONE
• To cancel the operation without updating the firmware, press SETUP.
4
Note
AUDIO
Use the cursor keys to select “Perform Update” and
press ENTER.
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
SUR. DECODE STRAIGHT
ENHANCER
• If the unit is connected to the wireless network via a wireless network adapter,
network update may not be possible depending on the condition of the
wireless connection. In this case, update the firmware using the USB memory
device (p.84).
DIRECT
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
SETUP
OPTION
SETUP
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
TV
ENT
• To perform the following procedure, your TV must be connected to the unit via
HDMI. If not, perform the update from the “ADVANCED SETUP” menu (p.84).
TV VOL
5
If “UPDATE SUCCESS PLEASE POWER OFF!”
appears on the front display, press z (power) on the
front panel.
The firmware update is complete.
Cursor keys
ENTER
• You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.84).
1
2
Press SETUP.
3
Use the cursor keys to select “Network Update” and
press ENTER.
INPUT
MUTE
The on-screen display turns off and the firmware update
starts.
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
TUNING
Use the cursor keys to select “Network” and press
ENTER.
TV CH
If new firmware is available, the envelope icon (p) appears
in the “Network Update” screen.
Network Update
p
Icon
Perform Update
Firmware Version
System ID
x.xx
xxxxxxxx
Update:ENTER
Back:RETURN
CONFIGURATIONS ➤
Updating the unit’s firmware via the network
En
88
APPENDIX
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
If you have changed speakers or have a new speaker system, use YPAO to optimize
the speaker settings again (p.31). If you want to adjust the speaker settings manually,
use “Speaker” in the “Setup” menu (p.71).
Since we have small children, we want to set limitations on the
volume control...
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum
volume level for the unit in advance (p.77).
I am occasionally startled by a sudden loud sound when turning
on the unit...
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
volume to be applied when the receiver is turned on (p.77).
We are bothered by volume differences when switching
between input sources…
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
I want to display a device name or a manufacture name on the
front display when selecting an input source...
By default, input source names (such as “HDMI 1” and “AV 1”) are displayed on the
front display when an input source is selected. If you want to rename them as you like,
use “Input Rename” (p.78) in the “Setup” menu. You can also select a name from the
presets (such as “Blu-ray” and “DVD”).
I want to prevent accidental changes to the settings...
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.79).
The unit’s remote control is simultaneously controlling another
Yamaha product as well as the unit...
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.83).
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.66).
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode…
I made HDMI connections but HDMI Control does not work at
all...
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.74) in the “Setup” menu
to “On”. You can also switch the input source using the remote control of the unit when
this function is enabled.
To use HDMI Control, you need to perform the HDMI Control link setup (p.100). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
APPENDIX
➤ Frequently asked questions
En
89
Troubleshooting
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets
securely.
b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
c The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Problem
Cause
Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. If the unit is in this condition, the standby indicator
on the unit blinks when you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 10 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
The power turns off (standby mode) immediately.
The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.16).
The sleep timer worked.
Turn on the unit and start playback again.
The auto-standby function kicked in because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off” (p.77).
The unit enters standby mode automatically.
The unit is not reacting.
The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers (p.83).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.16).
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 10 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
APPENDIX ➤ Troubleshooting
En
90
Problem
The unit cannot be controlled using the remote
control.
Cause
The unit is out of the operating range.
Use the remote control within the operating range (p.4).
The batteries are weak.
Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The remote control is set to control external devices.
Press SOURCE/RECEIVER to set the remote control to control the unit (the key
lights up in orange).
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.83).
The remote control is set to the Zone B operation mode.
Set the remote control to the Zone A operation mode (p.62).
The remote control is set to control the unit.
Press SOURCE/RECEIVER to set the remote control to control external devices
(the key lights up in green).
The corresponding remote control code is not set properly.
Set the remote control code again (p.85). Even if the remote control code is
registered properly, some products may not respond to the remote control.
A remote control code for another playback device is assigned to
HDMI 5.
Reset the remote control code registered to HDMI 5 (p.87).
The mobile device or its application is not externally controllable.
Directly operate the mobile device itself.
External devices cannot be controlled using the
remote control.
The MHL-compatible mobile device cannot be
controlled using the remote control.
Remedy
APPENDIX ➤ Troubleshooting
En
91
Audio
Problem
No sound.
The volume cannot be increased.
No sound is coming from a specific speaker.
(HTR-5066 only)
No sound is coming from the surround back
speaker.
No sound is coming from the subwoofer.
Cause
Remedy
Another input source is selected.
Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Signal Info” in the “Option” menu (p.66).
(HTR-5066 only)
Audio output to Zone A (or Zone B) is disabled.
Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B).
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
The maximum volume is set.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.77).
A device connected to the output jacks of the unit is not turned on.
(This may happen due to the nature of AV receivers.)
Turn on all devices connected to the output jacks of the unit.
The playback source does not contain a signal for the channel.
To check it, use “Signal Info” in the “Option” menu (p.66).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.73).
Audio output of the speaker is disabled.
Perform YPAO (p.31) or use “Configuration” in the “Setup” menu to change the
speaker settings (p.71).
The volume of the speaker is set too low.
Perform YPAO (p.31) or use “Level” in the “Setup” menu to adjust the speaker
volume (p.73).
(HTR-5066 only)
Audio output to Zone A (or Zone B) is disabled.
Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
The extended surround is disabled.
Use “Extended Surround” in the “Option” menu to select a decoder to be used
(p.65).
“Power Amp Assign” is set to “BI-AMP” or “Zone B”.
When “Power Amp Assign” in the “Setup” menu is set to “BI-AMP” or “Zone B”,
you cannot use the surround back speakers. To use the surround back speakers,
set “Power Amp Assign” to “Basic” (p.71).
The playback source does not contain LFE or low-frequency
signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer (p.72).
Subwoofer output is disabled.
Perform YPAO (p.31) or set “Subwoofer” in the “Setup” menu to “Use” (p.71).
The volume of the subwoofer is too low.
Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
APPENDIX ➤ Troubleshooting
En
92
Problem
No sound from the playback device (connected to
the unit with HDMI).
No sound from the TV (when HDMI Control is
used).
Only the front speakers work on multichannel
audio.
Cause
Remedy
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.74).
The number of devices connected to the HDMI OUT jack exceeds
the limit.
Disconnect some of the HDMI devices.
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.20).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.74).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.75). Also, enable ARC on the TV.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Signal Info” in the “Option” menu (p.66). If necessary, change
the digital audio output setting on the playback device.
The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
Noise/hum is heard.
The volume of the unit is too high.
Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.78).
A device connected to the unit’s output jacks is not turned on.
Turn on all devices connected to the unit’s output jacks.
The sound is distorted.
APPENDIX ➤ Troubleshooting
En
93
Video
Problem
No video.
No video from the playback device (connected to
the unit with HDMI).
Cause
Remedy
Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about
video signals supported by the TV, refer to the instruction manuals for the TV.
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Signal
Info” in the “Option” menu (p.66). For information about video signals supported
by the unit, see “HDMI signal compatibility” (p.102).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.18 to 21).
Another input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
Cause
Remedy
There is multi-path interference.
Adjust the FM antenna height or orientation, or place it in a different location.
The menu of the unit is not displayed on the TV.
FM/AM radio
Problem
Press MODE to select monaural FM radio reception (p.43).
FM radio reception is weak or noisy.
AM radio reception is weak or noisy.
Your area is too far from the FM station transmitter.
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.43).
Your area is too far from the FM station transmitter.
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Radio stations cannot be selected automatically.
The AM radio signal is weak.
Select the station manually (p.43).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
AM radio stations cannot be registered as
presets.
Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.44).
APPENDIX ➤ Troubleshooting
En
94
USB and network
Problem
Cause
Remedy
The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again.
The unit does not detect the USB device.
The file system of the USB device is not FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be
viewed.
The data in the USB device is protected by the encryption.
Use a USB device without an encryption function.
The network feature does not function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit (p.80). If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network (p.80).
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.54).
Some security software installed on your PC is blocking the access
of the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p.81).
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see “Playing back music
stored on media servers (PCs/NAS)” (p.54).
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting
silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your smartphone/tablet to allow it to access to the
unit (p.81).
The unit and smartphone/tablet are not in the same network.
Check the network connections and your router settings, and then connect the
unit and smartphone/tablet to the same network.
It may not be possible depending on the condition of the network.
Update the firmware via the network again or use a USB memory device (p.84).
The unit does not detect the PC.
The files in the PC cannot be viewed or played
back.
The Internet radio cannot be played.
The application for smartphone/tablet “AV
Controller” does not detect the unit.
Firmware update via the network is failed.
APPENDIX ➤ Troubleshooting
En
95
Error indications on the front display
Message
Cause
Remedy
Access denied
Access to the PC is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared
(p.54).
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot access the iPod.
Turn off the iPod and turn it on again.
The connected iPod is not supported by the unit.
Use an iPod supported by the unit (p.47).
Access error
Make sure your router and modem are turned on.
There is a problem with the signal path from the network to the unit.
Check the connection between the unit and your router (or hub) (p.28).
Check SP Wires
The speaker cables short circuit.
Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Internal Error
An internal error has occurred.
Contact the nearest authorized Yamaha dealer or service center.
MHL Overloaded
An overcurrent is flowing through the MHL-compatible mobile
device.
Turn off the unit and check the connection between the unit and mobile device.
No content
There are no playable files in the selected folder.
Select a folder that contains files supported by the unit.
The unit cannot detect the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
No device
The unit cannot detect the iPod.
Turn off the iPod and then turn it on again.
Please wait
The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.83).
The unit cannot play back the songs stored on the iPod for some
reason.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reason.
Check if the format of files you are trying to play is supported by the unit. For information about the
formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.54). If
the unit supports the file format, but still cannot play back any files, the network may be overloaded with
heavy traffic.
Firmware update is failed.
Update the firmware again.
Unable to play
Version error
APPENDIX ➤
Error indications on the front display
En
96
Glossary
Audio information
■ Audio decoding format
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
Dolby Digital EX
Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby
Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs).
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby Pro Logic IIx
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher
compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is
developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports
7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the
existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on
BD (Blu-ray discs).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home
theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
DTS Neo:6
DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music
mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete
full-bandwidth matrix channels of surround sound.
DSD (Direct Stream Digital)
Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three
modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for
game sources (for 2-channel sources only).
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super
Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest
frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology
offers better audio quality than that used for CDs.
Dolby TrueHD
FLAC
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a
high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio
formats in compression rate but provides higher audio quality.
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This
format remains fully compatible with the existing multichannel audio systems that support DTS Digital
Surround. This technology is used for music DVDs, etc.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This
decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a
surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a
discrete surround back channel is recorded.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this
compression method achieves a high compression rate. Reportedly, it is capable of compressing data
quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming
services on Internet because it allows a high compression rate of data while maintaining better audio quality
than MP3.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This
technology is the basis of all other audio format. This technology is used as a lossless audio format called
Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs).
APPENDIX ➤ Glossary
En
97
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal
is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
• Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.
When the sampling frequency is higher, the range of frequencies that can be played back are wider.
• Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound level into a
numeric value. When the number of quantized bits is higher, the expression of the sound level is more
accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by
converting audio signals. By default, the PCM method (no compression) is used, but you can also use other
compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic
technologies, this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/20 maintaining a certain level of audio quality.
■ Others
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
HDMI and video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because
each of these signals is independent.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are combined
and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate
on-screen color banding for smooth tonal transitions and subtle gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video
signal transmission. This interface transmits both digital audio and digital video signals using a single cable
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a
secure audio/video interface. For further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/”.
MHL
MHL (Mobile High-definition Link) is the interface standard for high-speed digital video signal transmission
that is developed for mobile devices. This interface transmits both digital audio and digital video signals
from mobile devices (such as smartphones) using a single cable with any loss. As with HDMI, MHL
complies with HDCP (High-bandwidth Digital Content Protection).
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
APPENDIX ➤ Glossary
En
98
Yamaha technologies
CINEMA DSP (Digital Sound Field Processor)
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is
best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions
(such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are
differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP,
Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own
home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA
DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the
accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression music
formats (such as MP3). As a result, this technology provides improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for
headphones have been set for each sound program, so that accurate representations of all the sound
programs can be enjoyed on headphones.
Virtual CINEMA DSP
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with
front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic
sound field in a listening room.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without
front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D
sound field in your room.
APPENDIX ➤ Glossary
En
99
Video signal flow
Information on HDMI
Video signals input from a video device to the unit are output to a TV as shown below.
Video device
The unit
TV
HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
For details on connections, see “Connecting a TV” (p.18) and “Connecting video
devices (such as BD/DVD players)” (p.23).
Operations available from the TV’s remote control
HDMI in
HDMI
• Standby synchronization
HDMI out
HDMI
HDMI
HDMI
• Volume control including mute
• Switching to input audio from the TV when the TV input is switched to its built-in tuner
• Switching to input video/audio from the selected playback device
• Switching between audio output devices (the unit or TV speaker)
(Example)
HDMI Control
HDMI Control
COMPONENT VIDEO
in
COMPONENT
VIDEO
COMPONENT
VIDEO
COMPONENT VIDEO
out
COMPONENT
VIDEO
COMPONENT
VIDEO
PR
PR
PR
PR
PB
PB
PB
PB
Y
Y
Y
Y
Playback device
also turns off
The unit turns off
(standby)
Turn off the TV
Operations available from the unit’s remote control
• Starting playback on the playback device and turning on the TV with a scene
selection (p.36)
VIDEO
VIDEO in
VIDEO out
VIDEO
VIDEO
• Switching the TV input to display the “Setup” menu (when SETUP is pressed)
VIDEO
• Controlling the playback device (playback and menu operations) without registering
remote control codes (p.86)
APPENDIX
➤ Information on HDMI
En
100
(Example)
7
HDMI Control
HDMI Control
Turns on and displays
video from the playback
device
Playback starts
Press SCENE (BD/DVD)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
Check that the unit is properly synchronized with the TV by turning
off the TV or adjusting the TV volume with the TV remote control.
• If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in
Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
• This setup is required every time you add a new HDMI Control-compatible device to your system.
1
2
Turn on the unit, TV, and playback devices.
Enable HDMI Control on the unit, TV, and playback devices (such as
HDMI Control-compatible BD/DVD players).
To enable HDMI Control on the unit, set “HDMI Control” (p.74) in the “Setup”
menu to “On” and configure the related items (“TV Audio Input”, “Standby
Sync”, “ARC”, and “SCENE”).
3
Turn off the main power of the TV and then turn off the unit and
playback devices.
4
5
6
Turn on the unit and playback devices and then turn on the TV.
Switch the TV input to display the video from the unit.
Check the followings.
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
On the TV: The video from the playback device is displayed.
APPENDIX
➤ Information on HDMI
En
101
HDMI signal compatibility
Audio signals
Audio signal type
Audio signal format
Compatible media (example)
2ch Linear PCM
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio
Multichannel Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
DSD
2 to 5.1ch, 2.8224 MHz, 1 bit
SACD
Bitstream
Dolby Digital, DTS
DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
BD (Blu-ray disc), HD DVD
High Resolution Audio, DTS
Express
Video signals
The unit is compatible with the video signals of the following resolutions:
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 576i/50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 480p/60 Hz
• 4K/30 Hz, 25 Hz, 24 Hz
• 576p/50 Hz
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
APPENDIX
➤ Information on HDMI
En
102
Reference diagram (rear panel)
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
MHL 5V 1A
(BD/DVD)
NETWORK
(NET)
ARC
DC OUT
5V 0.5A
ANTENNA
AM
(RADIO) FM
COMPONENT
VIDEO
PR
PR
PB
PB
SPEAKERS
FRONT
CENTER
SURROUND
SURROUND BACK/BI AMP
/ZONE B
SINGLE
Y
COMPONENT
VIDEO
Y
VIDEO
MONITOR OUT
1
OPTICAL
COAXIAL
COAXIAL
OPTICAL
AV 1
AV 2
AV 3
AV 4
( TV )
AV 5
AV 6
AV
OUT
AUDIO
2
SUBWOOFER
PRE OUT
(HTR-5066 U.S.A. model)
• The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
APPENDIX
➤ Reference diagram (rear panel)
En
103
Trademarks
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Pro
Logic, Surround EX and the double-D symbol are trademarks of
Dolby Laboratories.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
(For HTR-4066)
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
Android is a trademark of Google Inc.
This receiver supports network connections.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
(For HTR-5066)
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a trademark of
DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
MHL and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and/or other countries.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that
an electronic accessory has been designed to connect specifically
to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
APPENDIX
➤ Trademarks
En
104
Specifications
Input jacks
• Analog Audio
Audio x 4 (AV 5–6, AUDIO, V-AUX [Mini Jack])
• Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
Optical x 2 (AV 1, AV 4)
• Video
MONITOR OUT
- Composite x 1
MHL
AV OUT
• Video Format (Repeater Mode)
- Composite x 1
• HDMI Output
HDMI OUT x 1
Composite x 5 (AV 3–6, V-AUX)
Component x 2 (AV 1–2)
• HDMI Input
HDMI x 5 (HDMI 1–5*)
* HDMI 5: MHL input compatible
• Other jacks
USB x 1 (USB2.0)
NETWORK x 1 (100Base-TX/10Base-T)
Output jacks
• Link Function: CEC supported
- Component x 1
Coaxial x 2 (AV 2–3)
• Video
• Content Protection: HDCP compatible
- VGA
- 480i/60 Hz
- 576i/50 Hz
- 480p/60 Hz
Other jacks
- 576p/50 Hz
• YPAO MIC x 1
- 720p/60 Hz, 50 Hz
• DC OUT x 1
- 1080i/60 Hz, 50 Hz
- 1080p/30 Hz, 25 Hz, 24 Hz
HDMI
• HDMI features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC
(Audio Return Channel), 3D, 4K
• Audio Format
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• Current Supply Capacity: 1.0 A
• Video Format (Repeater Mode)
- VGA
TUNER
• Analog Audio
- 480i/60 Hz
• Analog Tuner
[HTR-5066]
- 576i/50 Hz
[U.K. and Europe models]
- Speaker Out x 7 (FRONT L/R, CENTER, SURROUND L/R,
- 480p/60 Hz
FM/AM with Radio Data System x 1 (TUNER)
SURROUND BACK L/R*)
- 576p/50 Hz
[Other models]
* Note: assignment is possible. [SURROUND BACK,
- 720p/60 Hz, 50 Hz
FM/AM x 1 (TUNER)
BI-AMP (FRONT L/R), ZONE B]
- 1080i/60 Hz, 50 Hz
- Subwoofer Out x 2 (SUBWOOFER 1–2, mono)
- 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
- AV OUT x 1
- 4K/30 Hz, 25 Hz, 24 Hz
- Headphone x 1
[HTR-4066]
- Speaker Out x 5 (FRONT L/R, CENTER, SURROUND L/R)
- Subwoofer Out x 1
- AV OUT x 1
- Headphone x 1
• Audio Format
- Dolby TrueHD
- Dolby Digital Plus
- Dolby Digital
USB
• Capable of iPod, Mass Storage Class USB Memory
• Current Supply Capacity: 2.1 A
Network
• PC Client Function
- DTS-HD Master Audio
• Compatible with DLNA ver. 1.5
- DTS-HD High Resolution Audio
• AirPlay supported
- DTS Express
• Internet Radio
- DTS
- DSD 6-ch
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
APPENDIX ➤ Specifications
En
105
Compatible Decoding Formats
• Decoding Format
- Dolby TrueHD, Dolby Digital Plus
- Dolby Digital EX [HTR-5066]
- Dolby Digital
- DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS Express
- DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
- DTS Digital Surround
• Post Decoding Format
[HTR-5066]
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby
Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie, Dolby
Pro Logic IIx Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
[HTR-4066]
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby
Pro Logic II Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
Audio Section
• Rated Output Power (2-channel driven)
[U.S.A. model] (20 Hz to 20 kHz, 0.09% THD, 8 )
[Other models] (20 Hz to 20 kHz, 0.09% THD, 6 )
Front L/R .................................................................80 W+80 W
[U.S.A. model] (1 kHz, 0.9% THD, 8)
Front L/R .................................................................95 W+95 W
Center ............................................................................... 95 W
Surround L/R...........................................................95 W+95 W
Surround Back L/R [HTR-5066]............................. 95 W+95 W
• Rated Output Power (1-channel driven)
[U.S.A. model] (1 kHz, 0.9% THD, 8 )
[Other models] (1 kHz, 0.9% THD, 6 )
• Frequency Response
AV 5 etc. to Front (10 Hz to 100 kHz).......................... +0/-3 dB
• Signal to Noise Ratio (IHF-A Network)
Front L/R .....................................................................115 W/ch
AV 5 etc. (Input Shorted 250 mV, Speaker Out)
Center ........................................................................115 W/ch
......................................................................... 100 dB or more
Surround L/R ..............................................................115 W/ch
Surround Back L/R [HTR-5066] .................................115 W/ch
• Maximum Effective Output Power (JEITA, 1 kHz, 10% THD, 6 )
[China, Korea, Asia and General models]
Front L/R .....................................................................135 W/ch
Center.........................................................................135 W/ch
Surround L/R ..............................................................135 W/ch
Surround Back L/R [HTR-5066] .................................135 W/ch
• Dynamic Power (IHF)
[U.S.A. model]
HTR-4066:
Front L/R (8/6/4/2 )................................110/130/160/180 W
HTR-5066:
Front L/R (8/6/4/2 )................................120/140/170/190 W
[Other models]
HTR-4066:
Front L/R (6/4/2 )..........................................110/130/160 W
HTR-5066:
Front L/R (6/4/2 )..........................................120/140/170 W
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out) ..................................... 150 µV or less
• Channel Separation
AV 5 etc. (Input 5.1 k Shorted, 1 kHz/10 kHz)
.................................................................60 dB/45 dB or more
• Volume Control
Range..............................................MUTE, -80 dB to +16.5 dB
Step.................................................................................0.5 dB
• Tone Control Characteristics
Bass Boost/Cut .............................±6 dB/0.5 dB Step at 50 Hz
Bass Turnover ................................................................350 Hz
Treble Boost/Cut.......................... ±6 dB/0.5 dB Step at 20 kHz
Treble Turnover ............................................................. 3.5 kHz
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround).................................12 dB/oct.
H.P.F. (Surround Back [HTR-5066]) ..........................12 dB/oct.
L.P.F. (Subwoofer) .....................................................24 dB/oct.
• Dynamic Headroom [U.S.A. model]
8 .................................................................................. 0.2 dB
• Damping Factor
Front L/R, 20 Hz to 20 kHz, 8 ............................. 120 or more
• Input Sensitivity / Input Impedance
AV 5 etc. (1 kHz, 100 W/8 ).............................. 200 mV/47 k
• Maximum Input Signal
AV 5 etc. (1 kHz, 0.5% THD, Effect On) ............................2.3 V
• Output Level / Output Impedance
AV OUT.............................................................. 200 mV/1.2 k
SUBWOOFER........................................................... 1 V/1.2 k
• Headphone Jack Rated Output / Impedance
AV 5 etc. (1 kHz, 50 mV, 8 ) ............................. 100 mV/470 
APPENDIX ➤ Specifications
En
106
Video Section
General
• Video Signal Type
• Power Supply
[U.S.A., Korea and General models]............................... NTSC
[U.S.A. model].................................................AC 120 V, 60 Hz
[Other models].................................................................... PAL
[General model] .............AC110 to 120/220 to 240 V, 50/60 Hz
• Video Signal Level
[China model]..................................................AC 220 V, 50 Hz
Composite ............................................................. 1 Vp-p/75 
[Korea model] .................................................AC 220 V, 60 Hz
Component
[Australia model] .............................................AC 240 V, 50 Hz
Y.......................................................................... 1 Vp-p/75 
[U.K. and Europe models] ..............................AC 230 V, 50 Hz
Pb/Pr ................................................................ 0.7 Vp-p/75 
[Asia model] ....................................AC 220 to 240 V, 50/60 Hz
• Video Maximum Input Level .......................... 1.5 Vp-p or more
• Video Signal to Noise Ratio ................................50 dB or more
• Monitor Out Frequency Response
Component ............................................ 5 Hz to 60 MHz, -3 dB
FM Section
• Tuning Range
[U.S.A. model] ............................................. 87.5 to 107.9 MHz
[Asia and General models]
• Power Consumption
[U.S.A. model].................................................... 270 W/320 VA
[Other models] ................................................................280 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off .............. 0.1 W or less
HDMI Control On, Standby Through On (No Signals)
.......................................................................... 1.0 W (Typical)
Network Standby On ......................................... 2.0 W (Typical)
• Dimensions (W x H x D)
.......................................87.5/87.50 MHz to 108.0/108.00 MHz
..................... 435 x 161 x 315 mm (17-1/8” x 6-3/8” x 12-3/8”)
[Other models].................................87.50 MHz to 108.00 MHz
* Including legs and protrusions
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono................................................................. 3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
• Weight
[HTR-5066]......................................................8.2 kg (18.1 lbs)
[HTR-4066]......................................................8.1 kg (17.9 lbs)
Mono................................................................................ 71 dB
Stereo .............................................................................. 69 dB
* Specifications are subject to change without notice.
• Harmonic Distortion (IHF, 1 kHz)
Mono................................................................................. 0.3%
Stereo ............................................................................... 0.5%
• Antenna Input ................................................75  unbalanced
AM section
• Tuning Range
[U.S.A. model] ................................................ 530 to 1710 kHz
[Asia and General models]...... 530/531 kHz to 1710/1611 kHz
[Other models]......................................... 531 kHz to 1611 kHz
APPENDIX ➤ Specifications
En
107
Index
Symbols
Audio Output (HDMI, Setup menu) 74
Audio Return Channel (ARC) 18
Auto Power Standby (ECO, Setup menu) 77
Auto Preset (FM radio, Option menu) 44
Automatic speaker setting optimization 31
Automatic station preset (FM radio) 44
AutoPowerStdby (ECO, Setup menu) 77
AV OUT jack 9
★/★★ keys 10
Envelope icon (p) 88
Lock icon (o) 79
Numerics
2.1-channel system 14
2ch Stereo (sound program) 39
3.1-channel system 14
4.1-channel system 13
4K signal (video signal resolution)
5.1-channel system 13, 15
5ch Stereo (sound program) 39
6.1-channel system 13
7.1-channel system 13, 15
7ch Stereo (sound program) 39
B
102
A
A.DRC (DSP/Surround, Option menu) 65
Access denied (error indication) 96
Access error (error indication) 96
Action Game (sound program) 38
Adaptive DRC (DSP/Surround, Option menu) 65
Adjustment (Lipsync, Setup menu) 76
ADVANCED SETUP menu 83
Adventure (sound program) 38
AirPlay 59
AM antenna connection 27
AM radio listening 43
Amp (Audio Output, Setup menu) 74
ARC (Audio Return Channel) 18
ARC (HDMI, Setup menu) 75
Audio Decoder (front display information) 63
Audio device connection 26
Audio file format (PC/NAS) 54
Audio file format (USB storage device) 51
Audio In (Option menu) 67
AUDIO jack 17
B RATE (Signal Info, Option menu) 66
Banana plug 16
Basic playback operation 35
Bass (Tone Control, Option menu) 65
BI-AMP (Power Amp Assign, Setup menu)
Bi-amp speaker connection 16
Bitrate (Signal Info, Option menu) 66
Bitstream 102
Component video connection (video device) 24
COMPONENT VIDEO jack 17
Composite video connection (video device) 24
Compressed Music Enhancer 42
Configuration (HDMI, Setup menu) 74
Configuration (Speaker, Setup menu) 71
Crossover (Speaker, Setup menu) 72
Crossover frequency setting 72
Crossover frequency setting (subwoofer) 31
D
71
C
CAT-5 cable 28
Cellar Club (sound program) 39
Center (Speaker, Setup menu) 71
Center Image (DSP Parameter, Setup menu) 76
Center Width (DSP Parameter, Setup menu) 76
Chamber (sound program) 39
CHAN (Signal Info, Option menu) 66
Channel (Signal Info, Option menu) 66
Check SP Wires (error indication) 96
Check Sur. (YPAO error message) 33
CINEMA DSP 38
CINEMA DSP 3D 40
CINEMA DSP 3D Mode
(DSP Parameter, Setup menu) 75
Clear Preset (FM/AM radio, Option menu) 45
Clock Time (Radio Data System) 46
COAXIAL jack 17
Component video cable 17
DC OUT (Function, Setup menu) 79
DC OUT jack 9
Decoder Off (front display information) 63
Default Gateway (Information, Setup menu) 80
Default Gateway (IP Address, Setup menu) 80
DHCP (IP Address, Setup menu) 80
Digital coaxial cable 17
Digital Media Controller (DMC) 81
Digital optical cable 17
Dimension (DSP Parameter, Setup menu) 76
Dimmer (Function, Setup menu) 79
DIRECT (sound mode) 41
Direct playback 41
Direct Stream Digital (DSD) 97
Distance (Speaker, Setup menu) 73
DLNA 54
DMC (Digital Media Controller) 81
DMC Control (Network, Setup menu) 81
DNS Server (Information, Setup menu) 80
DNS Server (IP Address, Setup menu) 80
Dolby Digital EX (Extended Surround) 65
Dolby Pro Logic (surround decoder) 41
Dolby Pro Logic II Game (surround decoder) 41
Dolby Pro Logic II Movie (surround decoder) 41
Dolby Pro Logic II Music (surround decoder) 41
Dolby Pro Logic IIx Game (surround decoder) 41
Dolby Pro Logic IIx Movie (Extended Surround) 65
APPENDIX
➤ Index
En
108
Dolby Pro Logic IIx Movie (surround decoder) 41
Dolby Pro Logic IIx Music (Extended Surround) 65
Dolby Pro Logic IIx Music (surround decoder) 41
Drama (sound program) 38
DSD (Direct Stream Digital) 97
DSP Level (DSP/Surround, Option menu) 65
DSP Parameter (Sound, Setup menu) 75
DSP Program (front display information) 63
DSP/Surround (Option menu) 65
DTS Neo:6 Cinema (surround decoder) 41
DTS Neo:6 Music (surround decoder) 41
DTS-ES (Extended Surround) 65
Dynamic Range (Volume, Setup menu) 77
Frequency (FM/AM radio) 43
Frequency step setting 43, 84
Front (Speaker, Setup menu) 71
Front display (part names and functions) 8
Front display brightness 79
Front display information 63
Front panel (part names and functions) 7
Front panel jack connection 26
Function (Setup menu) 78
E
Hall in Munich (sound program) 39
Hall in Vienna (sound program) 39
HDMI (Setup menu) 74
HDMI cable 17
HDMI connection (video device) 23
HDMI Control (HDMI, Setup menu) 74
HDMI jack 17
HDMI OUT (TV) (Audio Output, Setup menu)
HDMI signal compatibility 102
Headphones 42
High definition audio 102
High speed HDMI cable 17
ECO (Setup menu) 77
ECO Mode (Setup menu) 78
Enhancer (DSP/Surround, Option menu) 66
ENHANCER (sound mode) 42
EQ Select (Equalizer, Setup menu) 73
Equalizer (Speaker, Setup menu) 73
Error indication (front display) 96
EX/ES (Extended Surround, Option menu) 65
EXTD (DSP/Surround, Option menu) 65
Extended Surround (DSP/Surround, Option menu) 65
External device control (remote control) 85
External device operation key (remote control) 10
Extra Bass (Speaker, Setup menu) 72
F
Filter (MAC Address Filter, Setup menu) 81
Firmware update 84
Firmware update (network) 84, 88
Firmware update (USB) 84
Firmware Version (Network Update, Setup menu)
Firmware version check 84
FM antenna connection 27
FM radio listening 43
FM/AM radio tuning 43
FORMAT (Signal Info, Option menu) 66
Format (Signal Info, Option menu) 66
82
Interlock (Option menu) 67
Internal Err. (YPAO error message) 33
Internal Error (error indication) 96
Internet radio listening 57
IP Address (Information, Setup menu) 80
IP Address (Network, Setup menu) 80
iPod charge 47
iPod connection 47
iPod content playback 48
iPod content playback (AirPlay) 59
iTunes content playback (AirPlay) 59
G
GEQ (Equalizer, Setup menu)
73
L
H
I
In.Trim (Volume Trim, Option menu) 66
Indicator (part names and functions) 8
INFO key 7, 10
Information (Network, Setup menu) 80
Information display (front display) 8
Information switching (front display) 63
INIT (ADVANCED SETUP menu) 84
Initial Volume (Volume, Setup menu) 77
Input (front display information) 63
Input (Signal Info, Option menu) 66
Input Rename (Function, Setup menu) 78
Input selection key (remote control) 10
Input Trim (Volume Trim, Option menu) 66
74
Language (Setup menu) 82
Level (Speaker, Setup menu) 73
Level Error (YPAO warning message)
LFE (Low Frequency Effects) 98
Lipsync 98
Lipsync (Option menu) 66
Lipsync (Sound, Setup menu) 76
Low Frequency Effects (LFE) 98
34
M
MAC Address (Information, Setup menu) 80
MAC Address (MAC Address Filter, Setup menu)
MAC Address Filter (Network, Setup menu) 81
Manual station preset (FM/AM radio) 44
Max Volume (Volume, Setup menu) 77
Media sharing setup 54
Memory Guard (Function, Setup menu) 79
Menu language selection 30
Menu operation key (remote control) 10
MHL cable 17
MHL connection 23
MHL jack 17
MHL Overloaded (error indication) 96
MHL-compatible mobile device 23
MODE key 10
Monaural reception (FM radio) 43
Mono Movie (sound program) 38
MOVIE (sound program category) 38
APPENDIX
➤ Index
81
En
109
PEQ (Equalizer, Setup menu) 73
Perform Update (Network Update, Setup menu) 82
PHONES jack 7
Playback device connection 23
Playback device operation (remote control) 86
Please wait (error indication) 96
Power Amp Assign (Speaker, Setup menu) 71
Power cable connection 29
Power management 77
Power Mode (DC OUT, Setup menu) 79
Preset station selection (FM/AM radio) 45
Program Service (Radio Data System) 46
Program Type (Radio Data System) 46
Multiple room playback 61
MUSIC (sound program category) 39
Music Video (sound program) 39
MUTE key 10
Muting 35
N
NAS (Network Attached Storage) 28
NAS connection 28
NAS content playback 54
Network (Setup menu) 80
Network Attached Storage (NAS) 28
Network cable 28
Network connection 28
Network information 80
Network Name (Network, Setup menu) 81
Network Standby (Network, Setup menu) 81
Network Update (Network, Setup menu) 82
No content (error indication) 96
No device (error indication) 96
No Front SP (YPAO error message) 33
No MIC (YPAO error message) 33
No Signal (YPAO error message) 33
No Sur. SP (YPAO error message) 33
Noisy (YPAO error message) 33
NTSC (TV FORMAT, ADVANCED SETUP menu)
Numeric key (remote control) 10
R
84
O
OPTICAL jack 17
OPTION key 10
Option menu 64
Out of Phase (YPAO warning message) 34
Output (Signal Info, Option menu) 66
Over Distance (YPAO warning message) 34
P
PAL (TV FORMAT, ADVANCED SETUP menu)
Panorama (DSP Parameter, Setup menu) 75
PC connection 28
PC content playback 54
84
Radio Data System (FM radio) 46
Radio Data System information 46
Radio Data System tuning 46
Radio Text (Radio Data System) 46
Rear panel (part names and functions) 9
Recording device connection 29
RemID Mismatch (error indication) 96
Remote control (part names and functions) 10
Remote control code registration
(playback device) 86
Remote control code registration (TV) 85
Remote Control Code Search 85, 86
Remote control ID setting 83
Remote control ID setting (remote control) 83
Remote control sensor 7
Remote control signal transmitter (remote control)
REMOTE ID (ADVANCED SETUP menu) 83
Rename (input name) 78
Rename (network name) 81
Repeat (iPod, Option menu) 50
Repeat (PC/NAS, Option menu) 56
Repeat (USB storage device, Option menu) 53
Reset (remote control) 87
Roleplaying Game (sound program) 38
Router connection 28
10
S
SAMPL (Signal Info, Option menu) 66
Sampling (Signal Info, Option menu) 66
SBR  SBL (YPAO error message) 33
SCENE (HDMI, Setup menu) 75
Scene configuration 36
SCENE function 36
SCENE link playback 36
Sci-Fi (sound program) 38
Select (Lipsync, Setup menu) 76
SETUP key 10
Setup menu 68
Shuffle (iPod, Option menu) 50
Shuffle (PC/NAS. Option menu) 56
Shuffle (USB storage device, Option menu)
Signal Info (Option menu) 66
Signal information 66
SILENT CINEMA 42
Simple play (iPod) 49
SLEEP key 10
Sleep timer 10
Sound (Setup menu) 75
Sound field effect 38
Sound mode selection 37
Sound program 38
SP IMP. (ADVANCED SETUP menu) 83
Speaker (Setup menu) 71
Speaker cable connection 16
Speaker connection 15
Speaker impedance 12
Speaker impedance setting 14, 83
Speaker indicator (front display) 8
Speaker placement 12
Spectacle (sound program) 38
Sports (sound program) 38
Standard (sound program) 38
Standby indicator (front panel) 7
Standby Sync (HDMI, Setup menu) 75
Standby Through (HDMI, Setup menu) 74
APPENDIX
53
➤ Index
En
110
Station preset (FM/AM radio) 44
Status (Information, Setup menu) 80
Stereo mini jack 17
Stereo mini-plug cable 17
Stereo pin cable (RCA cable) 17
Stereo reception (FM radio) 43
STP network cable 28
STRAIGHT (sound mode) 40
Straight decode 40
Subnet Mask (Information, Setup menu) 80
Subnet Mask (IP Address, Setup menu) 80
Subwoofer (Speaker, Setup menu) 71
Subwoofer connection 16
Subwoofer Phase (Speaker, Setup menu) 72
Subwoofer Trim (Volume Trim, Option menu) 66
SUR.DECODE (sound mode) 41
Surround (Speaker, Setup menu) 72
Surround Back (Speaker, Setup menu) 72
Surround decoder 41
SW.Trim (Volume Trim, Option menu) 66
System ID (Network Update, Setup menu) 82
T
Test Tone (Speaker, Setup menu) 73
The Bottom Line (sound program) 39
The Roxy Theatre (sound program) 39
Tone Control (Option menu) 65
TONE CONTROL key 7
TP (Traffic Program) 46
Traffic information (Radio Data System) 46
Traffic Program (FM radio, Option menu) 46
Treble (Tone Control, Option menu) 65
TU (ADVANCED SETUP menu) 84
TV Audio Input (HDMI, Setup menu) 74
TV connection 18
TV connection (ARC-compatible TV) 18
TV connection (HDMI Control-compatible TV) 20
TV connection (TV with HDMI input jacks) 21
TV connection (TV without HDMI input jacks) 22
TV FORMAT (ADVANCED SETUP menu) 84
TV operation (remote control) 85
TV operation key (remote control) 10
YPAO MIC jack 7
YPAO microphone 31
YPAO warning message
U
34
Z
Unable to play (error indication) 96
UPDATE (ADVANCED SETUP menu) 84
USB jack 7
USB mass storage class device 51
USB storage device connection 51
USB storage device content playback 51
User Cancel (YPAO error message) 33
ZB.Trim (Volume Trim, Option menu) 62
Zone B 61
Zone B (Power Amp Assign, Setup menu) 71
Zone B operation 62
Zone B preparation 61
Zone B speaker connection 61
Zone B Volume (Volume, Setup menu) 77
Zone B volume adjustment 62
ZONE indicator (front display) 8
ZONE key 10
ZoneB Trim (Volume Trim, Option menu) 62
V
V IN (Signal Info, Option menu) 66
V OUT (Signal Info, Option menu) 66
VERSION (ADVANCED SETUP menu) 84
Version error (error indication) 96
VIDEO AUX jack 7
Video device connection 23
VIDEO jack 17
Video Out (Option menu) 67
Video pin cable 17
Video signal flow 100
Video signal type setting 84
Video/audio input jack combination 25
Virtual CINEMA DSP 40
Virtual Presence Speaker (VPS) 6
Voltage selection 29
VOLTAGE SELECTOR 9
Volume (Sound, Setup menu) 77
Volume Interlock (Option menu) 67
Volume Trim (Option menu) 66
VPS (Virtual Presence Speaker) 6
vTuner ID (Information, Setup menu) 80
Y
Yamaha Parametric room
Acoustic Optimizer (YPAO) 31
YPAO
(Yamaha Parametric room Acoustic Optimizer
YPAO error message 33
31
APPENDIX
➤ Index
En
111
© 2013 Yamaha Corporation YF214B0/EN