REFERENCE MANUAL

REFERENCE MANUAL
SMARTPHONE BLUETOOTH BARCODE SCANNER
REFERENCE MANUAL
[ SP-2100-2D ]
UNIONNET
[email protected] UnionNet Co., Ltd
(Version 1.32)
1
IMPORTANT NOTICES
PRECAUTIONS
Precautions for Use
- Read precautions carefully before using.
Before installation
1. Please let this be away from the direct ray of light, heating system like a heater.
2. It can be interrupted with magnetics.
3. Please do not install this around water.
4. It can cause (a)trouble(s) if It drops.
When Controlling,
1. Please do not sprinkle water on it directly and do not clean with benzene,
thinner, or alcohol, etc..
2. Please do not touch and look up the beam directly
3. Please do not break it up, fix it up, and reorganize it.
4. Please do not use it as a toy of children.
5. Please do not spill coffee or drink on it.
6. Please contact our Service Center directly when it needs to be fixed.
7. Please charge the battery with the Rated Voltage
8. Please use only the Genuine USB cable included, in case of use of PC USB
cable for computer, it can be damaged.
2
CONTENTS
BASIC FUNCTION
1. Precautions …………………………………………………………………………………………………………
2
2. Contents ………………………………………………………………………………………………………………
3
3. Composition …………………………………………………………………………………………………………
4
4. Exterior View ………………………………………………………………………………………………………
5
5. Battery Charging……………………………………………………………………………………………………
6
How TO USE
6. Turn On / Off & Auto Pairing…………………………………………………………………………………
6
7. Barcode Scan & Firmware ready mode & Scanner reset setting ………………………………..
7
INSTALLATION (WINDOWS)
8. How to install SP-2100 driver to Windows XP / Vista / Windows ...................................... 8 - 9
APPLICATION & SYSTEM MENU
9. Available application for SP-2100 testing ………………………………………………………………
10
10. Battery Charging & Reading Barcodes ……………………………………………………………
11-12
11. SP-2100 System Menu …………………………………………………………………………………
13-16
12. ANDROID UniReaderSPP………………………………………………………………………………
17-18
13. iOS(iPhone / iPad / iPod touch) Uni-Linker……………………………………………………………
19
14. Symbology ………………………………………………………………………………………………………
20
DATA TRANSMISSION TO MOBILES
15-1. Windows mobile………………………………………………………………………………………… 21 -27
15-2. Android (SPP Profile) …………………………………………………………………………………
28 -31
15-3. Android (HID profile) …………………………………………………………………………………
32 -34
15-4. iOS (HID profile) ………………………………………………………………………………………
35 -37
15-5. iOS (MFI profile) ………………………………………………………………………………………
38 -40
SETTINGS
16. Settings of Barcode Scanner …………………………………………………………………………
41 - 63
INFORMATION
17. Contact(A/S center) ………………………………………………………………………………………
3
End
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
COMPOSITION (SP-2100)
Barcode Scanner
USB Cable USB
Adaptor
USB Cigar Jack for CAR (OPTION)
4
Lanyard
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
EXTERIOR VIEW
⑦
⑤
③
②
⑧
④
①
⑥
89mm(L) * 43mm(W) * 19mm(H)
①
②
MAIN BUTTON: POWER & scan the Barcode
Down Scroll Button : Checking the barcode data
③
④
⑤
Up Scroll Button : Checking the barcode data & enter to System Menu
LCD Window : Checking the Scanner status & Barcode data in real time
LED : Green / Red LEDs & Checking the scanned Barcode success or not
⑥
⑦
Mini USB charging port & reset button
Dust Cover for scanner engine
⑧
Buzzer
5
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BATTERY CHARGING & TURN ON/OFF & AUTO Reconnect / Disconnect
Battery Charging:
Users can easily use a Cigar Jack or USB cable with
adaptor to charge the SP-2100.
Turn On: Put No.1 button about 3 seconds.
①
Turn Off: It will automatically turn off according to
the Power Auto-Off settings.
①
Turn Off (shortcut key): Press the Scan button for
about 7 seconds then it will turn off directly.
Auto-Reconnect:
Pls. press the “down button” only one time when
the scanner’s pairing is disconnected from the
①
device. Then after about 1 - 2 sec., SP-2100 will be
completely reconnected to the latest device.
Disconnect:
Pressing the “down button” about 3 sec. when BT is
connected to the device
6
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCAN & FIRMWARE READY MODE & SCANNER RESET SETTING
How to scan the Barcodes:
The Barcode data will be indicated with a beep
sound on the OLED Screen, when users press the
Scan Button into the distance of about 10 - 30cm.
Firmware Ready Mode:
To upgrade its firmware, users first need to go to a
“firmware upgrade mode” by pressing the scan
button + up button simultaneously, then the LED
will be flashing and it means ready.
Scanner Rest:
If user needs to reset the scanner, pls. press the
reset button which is located at bottom left of the
scanner.
7
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
INSTALLATION with Windows XP / Vista / Windows 7
Windows XP / Vista / Windows 7
WARNING: DO NOT CONNECT SP-2100 SCANNER TO USB PORT PRIOR TO
INSTALLATION
1. Insert SP-2100 Installation CD into your computer’s CD drive.
2. Go to Driver Folder in the CD.
3. Click SP-2100 Driver and then try to install the driver at your computer.
* You can download the driver at our homepage as follows *
http://www.unionnet.co.kr/eng/products/list_new.asp?ref=15&title=Bluetooth Barcode Scanner
NOTES
• If you have any problems, please refer to the Manual Installation section.
SP-2100 DRIVER SETUP
Below are the screen images you will see during the installation of SP-2100 Driver.
①
Try to connect the SP-2100 to the PC using the USB cable
& turn-on the SP-2100 scanner for driver installation ready.
② After a few minutes, the [Driver Software Installation] program is automatically run and
select <The Driver folder, you can find it into the CD > SP-2100 Driver, if your PC ask for
a suitable driver, and select the <Next> button.
8
③ If you see the following message on your PC, then it means that the program is
successfully installed.
④ User can verify installed COM Port in Device Manager as below.
Notes: After installation, if you see either “SP-2100 BARCODE SCANNER (COM5)”
or “AT91 USB to Serial Converter (COM5)”, it means that the installation is successfully
done.
9
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
AVAILABLE APPLICATIONS FOR SP-2100 TESTING
Android
Download and install “UniReaderSPP” and “UniLinker” from the Android Market.
UniReaderSPP
UniLinker
iPad/iPhone/iPod touch
Download and install “Uni-Linker” from the Apple App Store.
10
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BATTERY CHARGING & READING BARCODES
Charge SP-2100 Battery
Prior to using the KDC, you must charge its battery fully. To charge the battery, follow these
directions.
1. Connect the SP-2100 cable to the mini USB connector on the SP-2100
2. Connect the SP-2100 cable to USB connector on your computer.
3. Your SP-2100 battery will begin charging. Then you can directly see the battery charging on the
LCD window and if you need to check exactly how much battery is charging now, you can
check the actual battery fuel by entering to the System Menu  Battery.
Approximate Time to Charge for SP-2100 Battery
SP-2100-1D
SP-2100-2D
REMARKS
2 Hours and Half
2 Hours and Half
Capacity : 1,450mAh
How many barcodes can a fully charged SP-2100 scan?
Standard
Bespoke
(ex: USA / EU / Asia countries)
(ex: Japan)
Scan Byte
250Byte
500Byte
Scan & Store
About 30,000
About 15,000
Language
The SP-2100 can scan more than 30,000 barcodes when fully charged. And the capacity of stored
data by SP-2100 can be different depends on each countries scan Byte like above chart.
11
Reading Barcodes
Reading a barcode is quite easy and simple. Point the SP-2100 at a barcode and press the scan
button. Be sure to point the scan engine at the barcode, not at your face, and make sure to
position the light beam on the barcode. If the barcode is scanned successfully, you will hear one
beep and the LEDs will illuminate in green. The scanned barcode data will be displayed along with
the scan time and battery level.
Failed reading… If you have problems scanning a barcode, try the following suggestions while
pointing the SP-2100 at the barcode and depressing the scan button.

Modify the angle of the SP-2100 in relation to the barcode, making the angle bigger or
smaller as needed.

Modify the distance between the barcode and the SP-2100, moving closer or further away
as needed.

Check option settings defined in the SP-2100 menu section and change options as needed.

Check that the barcode’s width does not exceed the light beam’s width and vice versa.
SP-2100 LCD DISPLAY CONDITIONS
Antena
BT Profile
Volume
Battery Level
Condition
Scan ready
Data Save
Condition
SP-2100 SAVED DATA DISPLAY
DISPLAY
Standard
Bespoke
(ex: USA / EU / Asia countries)
(ex: Japan)
TYPES
(stored data)
The SP-2100 can display the stored data on LCD window with a different way according to each
client requests and its display types. (Standard / Bespoke)
12
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SP-2100 SYSTEM MENU
Top Menu
Sub Menu
Options
SP-21001D
SP-21002D
Default
Set
Information
S/N, M/D, H/W, F/W,
BOOTLOADER,
MEMORY
Checking the present
Version
N/A
N/A
N/A
Power Auto Off
1min – 10min
Enable
Enable
5min
LCD Auto Off
1sec – 60sec
Enable
Enable
10sec.
Backlight
10% - 100%
Enable
Enable
60%
RealTime Clock
y/m/d/D
Enable
Enable
N/A
Pre/Suffix Set
Setup Pre/Suffix
Enable
Enable
NUL
(NOT)
Language
Kor/Eng
Kor/Eng
Kor/Eng
Eng.
N/A
N/A
Settings
Buzzer
Bluetooth
3
:
2
:
1
: Off
(High : Middle : Low : Off)
3
(High Beep)
Vibrator
Enable/Disable
Enable
Enable
Disable
Default Config.
Yes/No
Yes
Yes
No
Information
Checking the present BT
info.
N/A
N/A
N/A
BT Profiles
HID
SPP
(Automatically change
by MUX)
MFi (only for iOS)
N/A
N/A
MUX
HID Batch
Enable
N/A
N/A
N/A
MFI Mode
Enable / Disable
Enable
Enable
Enable
Auto Reconnect
Enable/Disable
Enable
Enable
Disable
Disconnect
Enable
N/A
N/A
N/A
HID Date Add
Enable/Disable
Enable
Enable
Disable
Trans Language
English
French
Danish
Swedish
Enable
Enable
English
13
HID Select
Normal / Special
Normal /
Special
Normal /
Special
Normal
HID Char Delay
Time:
Not Delay ,10,20,50,100,
200,500(msec)
Enable
Enable
Not Delay
HID String Int.
Time:
Not Interval,
100,200,500(msec)
1,2,5(sec)
Enable
Enable
200msec
Information
Checking the present
Scan engine info.
N/A
N/A
N/A
Engine Setup
SE-380[1D]
EM-1300[1D]
EM-3000V2[2D]
N/A
N/A
N/A
Continue Mode
Auto / Manual
Auto /
Manual
Auto /
Manual
Manual
Duplicate Data
Enable/Disable
Enable
Enable
Disable
Data Save
SR (Save&Real send)
SN (Save&Not send)
PR (Pass&Real send)
Enable
Enable
SR
Memory Info.
Checking the present
memory info.
N/A
N/A
N/A
Delete Memory
Yes/No
Yes
Yes
No
Battery
Power view
Checking the present
battery fuel and info.
N/A
N/A
N/A
Service
Service info.
Checking the supplier’s
contact info.
N/A
N/A
N/A
Scan Engine
Memory
[SP-2100 MENU OPTIONS]
HID Batch
User can synchronize stored barcode data over HID using SP-2100 HID Batch option. SP-2100
starts to transmit all stored barcode data upon executing HID Batch option.
MFI Mode (Serial mode at ios device)
User can set the BT profile to MFI when the SP-2100 needs to connect to iOS devices like serial
mode. User can choose either enable or disable according to the user’s device and working
condition.
(Notes #1.)
In case of using with Android HID or SPP or iOS HID : Needs to set the MFI Mode to “Disable”
14
(Notes #2.)
In case of using with iOS MFi(serial mode): Needs to set the MFI Mode to “Enable”
Auto Reconnect (Shortcut key: pressing down button only 1 time)
User can set the SP-2100’s “Auto Reconnect” condition between Enable and Disable.
� Enable: permits to reconnect to the latest device automatically, when SP-2100 turn-on or
disconnected.
� Disable: Do not permit to reconnect to the latest device automatically.
Disconnect (Shortcut key: pressing down button about 3 sec.)
User can disconnect the SP-2100’s connection to the device forcibly.
HID Trans Language
User can select “international keyboard” – English, French, Danish, and Swedish
HID Select (Not mandatory)
User may select “HID Select” options according to the each country’s keyboard condition.
� Normal: Standard keyboard such as English, Korean, European languages…
� Special: Japanese, Chinese and others..
HID String Internal and Inter-Character Delay
Certain application can't process HID input fast enough and lose some characters during
transmission. Users would increase initial and inter-character delay to prevent data lose during
HID transmission
� HID Inter-character Delay
* Define the inter-character delay between [Not Delay ,10,20,50,100,200,500(msec)] in HID mode
� HID String Delay
* Define the initial delay between [Not Interval, 100,200,500(msec)1,2,5(sec)]in HID mode
15
Disconnect/Reconnect/HID Toggle
Users can disconnect or reconnect the SP-2100 Bluetooth connection and active toggle soft
keyboard using side down buttons as follows.
DEVICE O/S
Android
IOS
PROFILE
KEY
(Common)
RECONNECT
HID
DOWN
KEY
Pressing one time
SPP
DOWN
KEY
Pressing one time
MFi
N/A
N/A
N/A
N/A
HID
DOWN
KEY
Pressing one time
Pressing about 3 sec.
when BT is connected to
the device
Pressing only
one time
when BT is
connected
SPP
N/A
N/A
N/A
N/A
MFi
DOWN
KEY
Pressing one time
Pressing about 3 sec.
when BT is connected to
the device
Pressing only
one time
when BT is
connected
HID
DOWN
KEY
Pressing one time
SPP
DOWN
KEY
Pressing one time
PC
16
DISCONNECT
Pressing about 3 sec.
when BT is connected to
the device
Pressing about 3 sec.
when BT is connected to
the device
Pressing about 3 sec.
when BT is connected to
the device
Pressing about 3 sec.
when BT is connected to
the device
Toggling
N/A
N/A
N/A
N/A
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
ANDROID UniReaderSPP
Android - UniReaderSPP
The UniReaderSPP provides limited functionality to Android users.

UniReaderSPP only supports Android devices with 2.1+ OS version
SP-2100 and Android Pairing
1. Pairing & Connection
Pls. refer to the reference manual pages from p. 27 to p.33
Launch SP-2100 UniReaderSpp
1. Try to pair SP-2100 to your android device.
2. Download and install “UnireaderSPP” from the Android Market.
(Search with “UnireaderSPP”
on Android Market)
3. Check the SP-2100’s BT profile and try to set the scanner’s MFI Mode to “Disable” in the
Bluetooth Menu, then user can see the “MUX” on the screen with a “Normal Antenna” mark.
4. Try to open the “UniReaderSPP” application on your device.
5. Find your SP-2100 serial no. in the paired device at UnireaderSpp. App.
6. Click on “your serial no. paired”
7. If SPP profile connection is successfully done, users can hear a short beep sound with green
LED illumination and the BT profile of your SP-2100 will automatically be changed to SPP on the
screen.
8. You can scan the available barcodes then the scanned barcode will be displayed on the list of
UniReaderSPP app.
(Application icon)
(Application image)
UniReaderSPP
17
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
ANDROID Uni-Linker
Android – UniLinker
The Android UniLinker provides limited functionality to Android users.

UniLinker only supports Android devices with 2.1+ OS version
SP-2100 and Android Pairing
1. Pairing & Connection
Pls. refer to the reference manual pages from p. 27 to p.33
Launch SP-2100 with UniLinker
1. Try to pair SP-2100 to your android device.
2. Download and install “UniLinker” from the Android Market.
(Search with “UniLinker” on
Android Market)
3. Check the SP-2100’s BT profile and try to set the scanner’s MFI Mode to “Disable” in the
Bluetooth Menu, then user can see the “MUX” on the screen with a “Normal Antenna” mark.
4. Try to open the “UniLinker” application on your device and click the menu button on the device.
5. Click the “Search Devices” and then find your SP-2100 serial no. in the paired device at
UniLinker App.
6. Click on “your serial no. paired”
7. If SPP profile connection is successfully done, users can hear a short beep sound with green
LED illumination and the BT profile of your SP-2100 will automatically be changed to SPP on the
screen.
8. You can scan the available barcodes then the scanned barcode will be displayed on the list of
UniLinker app.
(Application icon)
(Application image)
UniLinker for Android
18
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
iOS(iPhone / iPad / iPod touch) Uni-Linker
iPhone, iPad, iPod touch – Uni-Linker
The Uni-Linker provides limited functionality to iOS users.

Uni-Linker only supports iOS devices with iOS 4.0 and above(iPhone, iPad, iPod)
version
SP-2100 and iOS Pairing
1. Pairing & Connection : Pls. refer to the reference manual pages from p. 34 to p.39
Launch SP-2100 with Uni-Linker
1. Check the SP-2100’s BT profile and try to set the scanner’s MFI Mode to “Enable” in the
Bluetooth Menu then user can see the “MUX” on the screen with an ” i Antenna” mark.
2. Download and install “Uni-Linker” from the App Store. (Search with “UniLinker” on App Store)
3. Try to pair SP-2100 to your iOS device first.
4. Once pairing is done successfully, users can hear a short beep sound with green LED
illumination.
5. you can either click on “Uni-Linker” app. or wait for the application execution which will be
executing automatically.
6. You can scan the available barcodes then the scanned barcodes will be displayed on the list of
Uni-Linker app.
(Application icon)
(Application images)
Uni-Linker for iOS
19
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SYMBOLOGY
The SP-2100 supports most major 1D, 2D barcode symbologies as follows.
SP-2100-1D
SP-2100-2D
1D Barcodes
Code128, EAN-13, EAN-8, Code39,
UPC-A, UPS-E, Codabar,
Interleaved2 of 5, ISBN, Code 93,
UCC/EAN-128, GS1 Datarbar, etc.
Code128
EAN-13
EAN-8
Code39
UPC-A
UPS-E
Codabar
ISBN
Code 93
GS1 Datarbar
UCC/EAN-128
Interleaved2 of 5
and etc.
2D Barcodes
AztecCode, AztecRunes, CodablockF,
Code16K,Code49, DataMatrix, MaxiCode,
MicroPDF, PDF417, QRCode,
and HanXin Code
[Listing of Symbologies Supported by SP-2100]
20
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Scanner Settings -> Bluetooth Settings -> Executes
the paring.
Starts with Windows Mobile Main
Page
->
Selects the set-up.
Pls. activate the Bluetooth setting at the connection
Tap.
21
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Pls. select the new Installation addition Tap.
Detected
an
installation
SP3BXXXXXXX(SP-2100).
22
named
the
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Pls.
select
“SP3BXXXXXXX(SP-2100)”
and
down “Next”.
There will be a message to fill out the code.
23
press
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Pls. fill out your code.
Indicates a connection message when you filled out
the code.
24
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Pls. activate a new transmission port by selecting
the COM port Tap.
Pls.
select
down “Next”.
25
“SP3BXXXXXXX(SP-2100)”
and
press
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Indicates the Port Setting Menu on the Screen.
COM port should be selected to COM6.
26
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Windows Mobile
Installation of port of SP3BXXXXXXX (SP-2100) to
be completed.
After executing the barcode program and read the
Barcode, then the data will be transmitted from the
Scanner to user’s Mobile.
27
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (SPP PROFILE)
Firstly, user needs to change the scanner’s BT
profile from “MFI” to “MUX” by following the
system setting.
System Menu  Bluetooth MFI ModeDisable
Pls. select the setting menu on the Mobile Screen.
Pls. select the wireless & Network into the setting
menu.
28
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (SPP PROFILE)
Pls. select the Bluetooth settings at the wireless and
Network.
Pls. search the serial no. of your scanner by clicking
the Scan devices.
29
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (SPP PROFILE)
Detected a model named SP3BXXXXXXX(SP-2100)
When you select the searched model, paring
message will be indicated on the Screen.
30
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (SPP PROFILE)
If the connection is successful with your mobile, a
request message of Bluetooth paring request will
be indicated on the Screen, pls. select “Accept”.
If the paring is done, the following message will be
indicated
on
the
Screen
“
Paired
but
not
connected”.
Then pls. read the Barcode after executing the
Barcode Program.
31
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (HID PROFILE)
Firstly, user needs to change the scanner’s BT
profile from “MFI” to “MUX” by following the
system setting.
System Menu  Bluetooth MFI ModeDisable
Pls. select the wireless & Network into the setting
menu.
Pls. select the Bluetooth settings at the wireless and
Network.
32
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (HID PROFILE)
Pls. search the serial no. of your scanner by clicking
the Scan devices and click the serial no. of your
scanner so that it starts for pairing.
Once pairing is done, you can see the following
message that “Connected to HID device”, it means
HID pairing is completely done, now is ready for
scan.
33
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to Android (HID PROFILE)
Pls. open the “Memo application” on the device
and then try to scan by reading the available
barcodes
you
need
then
the
data
transferred to the memo app. like this pic.
34
will
be
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to iPhone (HID PROFILE)
Firstly, user needs to change the scanner’s BT
profile from “MFI” to “MUX” by following the
system setting.
System Menu  Bluetooth MFI ModeDisable
Pls. enter to Settings Menu and select “General” on
the device.
Pls. enter to “Bluetooth” by clicking the Menu.
35
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to iPhone (HID PROFILE)
Turn on Bluetooth and look for your scanner’s serial
no. on the device’s screen after that finally click
your serial number.
If your connection is done successfully with your
device, the following message “Connected” will be
shown on the screen with a beep sound, it means
that the scanner’s pairing is completely done.
36
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to iPhone (HID PROFILE)
Pls. go to the Home menu and open “Notes”
application.
And press the scan button by reading the available
barcodes then the barcode input will bring up on
the “Note”
37
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to iPhone (MFI PROFILE)
Firstly, user needs to set the scanner’s BT profile to
“MFI” by following the system setting.
System Menu  Bluetooth MFI ModeEnable
(Notes:
MFI is a default BT profile at first)
Pls. enter to Settings Menu and select “General” on
the device.
Pls. enter to “Bluetooth” by clicking the Menu.
38
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to iPhone (MFI PROFILE)
Turn on Bluetooth and look for your scanner’s serial
no. on the device’s screen after that finally click
your serial number.
If your connection is done successfully with your
device, the following message “Connected” will be
shown on the screen with a beep sound, it means
that the scanner’s pairing is completely done.
39
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
SENDING THE DATA BY MOBILE
/ Sending to iPhone (MFI PROFILE)
Pls. go to the Home menu and open “Uni-Linker”
application.
With a short beep sound, users can see the
following message “UniReader is connected...”
Then users can start to read the barcodes on the
scanning test page and send the scanned data on
it.
SP-2100
setting
condition
can
be
completely
controlled by Uni-Linker.
Move to setting menu at Uni-Linker app. then user
can easily change the setting options of SP-2100 to
user’s hopeful condition for satisfaction.

Other menus at Uni-Linker:
Information / Firmware / Contact info
40
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS / Scanner Main Menu
INDEX MENU
SCAN ENGINE
SCANNER INFO.
SCANNER SETTINGS
MEMORY
BATTERY INFO.
BLUETOOTH SETTINGS
SERVICE
•
Can enter to the setting menu, if user presses down the up button about 3 seconds.
•
Can select the menu button, if user presses down the up and down button which is
located on the left of scanner.
•
Can enter to the selected menu, if user presses down the Scan button which is located on
center of scanner.
41
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS / Scanner info.
•
User can check the present scanner info.
through this scanner info. menu.
SCANNER
SCANNER INFO.
MAIN MENU
S/N
M/D
H/W
BOOTLOADER
•
S/N : Shows the particular serial number of the product.
•
M/D : Shows the manufactured date of the product.
•
H/W : Shows the present Version of product hardware.
•
F/W : Shows the Scanner Program Version
•
BOOTLOADER : Shows the BOOTLOADER Version of the Scanner
•
Memory : Shows the memory info.

Can exit to the Scanner Menu when press down the button of Scan
42
F/W
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
/ Scanner settings
•
User can set up the Scanner when user
presses down the button of SCAN at the
page of main menu scanner info.
SCANNER
SCANNER SETTINGS
MAIN NENU
Exit Sub Menu
Time Setting
Power Off Setting
LCD Time Setting
Language Selection
Backlight
Default Config.
•
Exit Sub Menu : Exit to the Scanner menu
•
Power Auto Off : It will automatically turn off if user doesn’t use the Scanner during the
particular setting time.
•
LCD Auto Off: LCD window will automatically turn off if user doesn’t use the Scanner.
•
Backlight : Adjust the brightness of LCD Window
•
Real Time Clock : Setting for present time, date, month, year
•
Pre/Suffix Set : Setting for scan condition of pre/suffix
•
Language : Select the Scanner Menu Language (Kor / Eng)
•
Buzzer : Setting for buzzer use or not.
•
Vibrator : Setting for vibrator use or not
•
Default Config. : Initialize all settings of the Scanner
43
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
SCANNER SETTING
POWER OFF SETTING
MAX. TIME
SETTING COMPLETION
MIN. TIME
•
/ Power Off Setting
Can set-up the power setting by pressing down the Scan Button at the Scanner Setting
Menu Power Off.
•
Power Auto-Off Time setting can be adjustable from 1 min. up to 10 minutes.
•
Can select the menu button, if user presses down the up and down button which is
located on left of Scanner.
•
Can exit to the Scanner Menu by pressing down the button of Scan after time setting.
44
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
SCANNER SETTING
MIN. TIME
•
/ LCD Auto off settings
MAX. TIME
LCD TIME SETTING
SETTING COMPLETION
Can set-up the LCD time setting by pressing down the Scan Button at the Scanner
Menu of LCD time setting.
•
LCD Auto Off setting can be adjustable from 2 sec. up to 60 seconds.
•
Can select the Time setting, if user presses down the up and down button which
is located on left of Scanner.
•
Can exit to the Scanner Menu by pressing down the button of Scan after setting.
45
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
Brightness 100%
•
/ Backlight settings
SCANNER SETTING
Brightness 80%
Backlight
Brightness 0%
Setting Completion
Can set-up the LCD Lightness setting by pressing down the Scan Button at the
Scanner Menu of LCD brightness setting.
•
LCD brightness setting can be adjustable from 0% up to 100%
•
Can select the brightness setting, if user presses down the up and down button
which is located on left of scanner.
•
Can exit to the Scanner Menu by pressing down the button of Scan after LCD
brightness setting.
•
If the LCD window lightness is brighter, battery will be discharged easily.
46
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
•
/ Real Time Clock settings
SCANNER SETTING
Year
Month
Min.
Sec.
Real TIME SETTING
Date
Exit Menu
Hour
Setting Completion
Can set-up the TIME setting by pressing down the Scan Button at the Scanner
Menu of Time Setting.
•
Can successively change the Year,Month,Date,Hour,Min.,Sec. setting by pressing
down the up and down button which is located on left of Scanner.
•
The Scanner time setting will be done, after a Sec. Setting finally.
•
※ Pls. note that if the real time setting is incorrect, the stored data after
reading the barcode may not be correct.
47
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
/ Pre/Suffix Set
ASCII Input Shortcut
To configure the user definable parameters of SP-2100 via programming menu, SP-2100 will ask
you to scan your desired ASCII value in HEX form. You have to refer to the “HEX/ASCII Table” for
details.
(Users can set this prefix/Suffix option on “UniLinker” application in the setting menu)
Example:
If you want the scanned data output leading with a Dollar Sign, you have to set the “Preamble” to
“$”. The configuration procedure is listed below for reference.
* Refer to the Hex/ASCII Table, you will find the HEX value of “$” is 24.
* Select the option code – 2 listed on the fold out back cover. (Change with up/down button)
* Select the option code – 4 listed on the fold out back cover. (Change with up/down button)
* Press the SCAN button when you finish the setting.
48
HEX/ASCII Reference Table
H
0
1
2
3
4
5
6
7
0
NUL
DLE
SPACE
0
@
P
`
p
1
SOH
DC1
!
1
A
Q
a
q
2
STX
DC2
"
2
B
R
b
r
3
ETX
DC3
#
3
C
S
c
s
4
EOT
DC4
$
4
D
T
d
t
5
ENQ
NAK
%
5
E
U
e
u
6
ACK
SYN
&
6
F
V
f
v
7
BEL
ETB
'
7
G
W
g
w
8
BS
CAN
(
8
H
X
h
x
9
HT
EM
)
9
I
Y
i
y
A
LF
SUB
*
:
J
Z
j
z
B
VT
ESC
+
;
K
[
k
{
C
FF
FS
,
<
L
\
l
|
D
CR
GS
-
=
M
]
m
}
E
SO
RS
.
>
N
^
n
~
F
SI
US
/
?
O
_
o
DEL
L
Example: ASCII “A” HEX “41” ; ASCII “a” ”61”
High Byte of HEX Value
Low Byte of HEX Value
49
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
KOREAN
•
/ Language setting
SCANNER SETTING
ENGLISH
LANGUAGE SELECTION
Setting Completion
Can set-up the Language setting by pressing down the Scan Button at the
Scanner Menu of Language Setting.
•
Language can be selected into Korean or English
•
Can select the Language Setting, if user presses down the up and down button
which is located on left of Scanner.
•
Can exit to the Scanner Menu by pressing down the button of Scan after
Language setting.
50
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
Default Config / NO
•
/
Default Config setting
SCANNER SETTING
Default Config / YES
Default Config
Setting Completion
Can initialize all setting conditions by pressing down the Scan Button at the
Scanner Menu of default config.
•
Can be adjustable the Setting by pressing down the up and down button which
is located on left of Scanner.
•
Caution: Not only system settings but also barcode data can be deleted.
51
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
DISCONNECT
•
/ Bluetooth Settings
BLUETOOTH SETTINGS
HID Add Date
Can set-up the Bluetooth setting by pressing down the Scan Button at the
Scanner Menu of Bluetooth Setting.
•
Can be adjustable the Bluetooth Setting by pressing down the up and down
button which is located on left of Scanner.
•
Information : Check for BT version and Profile
•
HID Batch : Sends the stored barcode data to the device in HID
•
MFI Mode : Enable or Disable the MFI profile for ios device
•
Auto Reconnect : Setting for auto reconnect use or not.
•
Disconnect : Forcibly disconnect the reader’s BT from the device
•
Hid Date Add : Enable to send the barcode data along with real date info.
•
Trans Language : Setting for Trans language (En/Fr/Da/Sw)
•
HID Select : Setting for HID Select according to the each country’s keyboard
condition (Normal / Special)
•
HID Char Delay : Setting for Character delay in HID
•
HID String Delay : Setting for String delay in HID
52
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
/ Trans Language
•
Can select total 4 of Trans languages by selecting one on the menu.
•
SP-2100 supports the following Trans languages such as English / Swedish /
Danish / French.
※ Pls. note that in order to use this function, users need to set-up SP-2100’s trans
Language option to the same as your device’s keyboard language.
BARCODE SCANNER SETTINGS
/ HID Char Delay & String Delay
Certain application can't process HID input fast enough and lose some characters during
transmission.
Users would increase initial and inter-character delay to prevent data lose during HID transmission
� HID Character Delay
o Define the Char delay from 10msec to 500msec before data transmission in HID mode
� HID String Delay
o Define the String delay from 100msec to 5sec in HID mode
BARCODE SCANNER SETTINGS
/ HID Char Delay & String Delay
User can synchronize stored barcode data over HID using HID Batch option. SP-2100 starts to
transmit all stored barcode data upon executing HID Batch option.
53
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
1. Information
Information
/ Scan Engine
SCAN ENGINE
2. Engine Setup
3. Continue Mode
Engine Setup
Continue Mode
4. Duplicate Data
Duplicate Data
•
Scan Engine Info. : Can confirm the Device Engine information
•
Scan Engine Setup : Can setup the engine by reading setting barcodes at this mode
•
Continue Mode : Can setup your engine’s reading condition either Auto or Manual by
entering at this menu
•
Duplicate Data setting: Do not scan the Barcode data which is duplicated.

Can be adjustable the setting options by pressing down the up/down button which is
located on left of Scanner.
54
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
/ Scan Engine Info.
SCAN ENGINE
SCAN ENGINE INFO.
SCAN ENGINE INFO.
•
Can set-up the Scan Engine Info. by pressing down the Scan Button at the Scanner Menu
Screen of Scan Engine Info.
•
Scan Engine Info. : Can check the scanner’s engine info. which is built-in to the Scanner.
•
Can exit to the Menu when user presses down the Scan Button.
55
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
•
/ Scan Engine setting
SCAN ENGINE
SCAN ENGINE SETTING
Can set-up the Scan Engine Setting by pressing down the Scan Button at the
Scanner Engine Menu Screen of Scan Engine Setting.
•
This is a Barcode Engine Set-up Menu only.
•
Pls. refer to the Barcode Engine Set-up Menu attached.
•
It will automatically exit when a user doesn’t use the SP-2100 for about 5 min
after setting.
56
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS / Auto & Manual engine setting
SCANNER MAIN MENU
MANUAL Setting
•
SCAN ENGINE
AUTO Setting
SCAN ENGINE INFO.
Setting Completion
Can set-up the Auto/Manual Setting by pressing down the Scan Button at the
Scanner Engine Menu Screen of Auto/Manual Setting.
•
Auto Setting: Barcode can be automatically read without pressing down the Scan
Button of the Scanner.
•
Manual Setting: Barcode gets started to read the barcode when user press down the
Scan Button of the Scanner.

Note: If it is set-up with Auto Mode, battery will be discharged easily.
57
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
MANUAL
•
/ Duplication check setting
SCAN ENGINE
AUTO
SCAN ENGINE INFO.
Setting Completion
Can set-up the Duplication Check Setting by pressing down the Scan Button at
the Scanner Engine Menu Screen of Duplication Check Setting.
•
Scan Engine Setting : When the equipment reads the same barcode in two times,
only one barcode data will be delivered and stored.
58
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
Exit Sub Menu
•
/ Memory
MEMORY
Memory Info.
Memory Delete
Data Save
Can check the Memory Info. by pressing down the Scan Button at the Scanner Engine
Menu Screen of Memory.
•
There are Memory delete function and Memory use information in the Memory.
•
If you go to the “Data Save” menu then you can choose total three of available options.
SR : means “ Save & Real send “
SN : means “ Save & Not send “
PR : means “ Pass & Real send “
•
If users choose the Menu Exit then you can move to the Main Menu
59
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
/ Memory use info.
MEMORY
MEMORY INFO.
SCAN EXIT
•
Can check the Memory use Info. by pressing down the Scan Button at the Scanner
Engine Menu Screen of Memory Use Info.
•
User is a possible Memory capacity.
•
System is a stored Memory included the setting info. in the equipment.
•
Can exit to the Menu when press down the Scan Button
60
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
RESET CANCEL
•
/ Memory delete
MEMORY
MEMORY INFO.
DELETE
DELETING
DELETE COMPLETION
Can delete the Memory data by pressing down the Scan Button at the Memory delete
Screen of Memory menu.
•
If user select “No”, the Memory Delete will be cancelled.
•
If user select “Yes”, all stored data can be deleted but except the Configuration settings.
•
Can exit to the Menu when a user press downs the Scan Button.
61
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
/ Battery info
BATTERY
Battery Info.
•
Can check the Battery Charging Status by pressing the Scan Button at the Battery info.
Menu.
•
Voltage : Charging Voltage
•
Capacity : Pls. charge the battery in case of battery residual lower than 30 %.
62
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
BARCODE SCANNER SETTINGS
SCANNER MAIN MENU
/ Service
A/S CENTER
INFO. OF A/S CENTER
•
Can check the A/S Center Info. by pressing down the Scan Button at the Service.
•
In case of product defects, pls. call to our A/S Center directly so that we can rapidly &
kindly solve the issue.
63
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement