Bosch | IXO Professional | Technical data | Bosch IXO Professional Technical data

OBJ_DOKU-14181-006.fm Page 1 Tuesday, October 25, 2011 2:19 PM
WEU
WEU
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
IXO
www.bosch-pt.com
2 609 005 792 (2011.10) O / 187 WEU
de
en
fr
es
pt
it
nl
da
sv
no
fi
el
tr
Originalbetriebsanleitung
Original instructions
Notice originale
Manual original
Manual original
Istruzioni originali
Oorspronkelijke gebruiksaanwijzing
Original brugsanvisning
Bruksanvisning i original
Original driftsinstruks
Alkuperäiset ohjeet
Ðñùôüôõðï ïäçãéþí ÷ñÞóçò
Orijinal işletme talimat
OBJ_BUCH-826-006.book Page 3 Tuesday, October 25, 2011 2:37 PM
|3
4
2
3
5
6
11
1
7
IXO
10
A
9
8
5
12
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 4 Tuesday, October 25, 2011 2:37 PM
4|
B
2
1
1
C
3
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 5 Tuesday, October 25, 2011 2:37 PM
|5
D
13
14
15
16
17
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 6 Tuesday, October 25, 2011 2:37 PM
6|
E
18
F
3
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 21 Tuesday, October 25, 2011 2:37 PM
English | 21
f Integrierte Akkus dürfen nur zur Entsorgung entnommen werden.
Durch das Öffnen der Gehäuseschale kann das Elektrowerkzeug zerstört werden.
Um den Akku aus dem Elektrowerkzeug zu entnehmen, betätigen Sie den
Ein-/Ausschalter 8 solange, bis der Akku vollständig entladen ist. Drehen
Sie die Schrauben am Gehäuse heraus und nehmen Sie die Gehäuseschale ab. Trennen Sie die Anschlüsse am Akku und nehmen Sie den Akku heraus.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
f Keep work area clean and well lit. Cluttered or dark areas invite accidents.
f Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
f Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
f Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 22 Tuesday, October 25, 2011 2:37 PM
22 | English
f Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
f Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
f Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges and moving parts. Damaged or entangled cords increase the
risk of electric shock.
f When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
f Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
f Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
f Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on invites
accidents.
f Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
f Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 23 Tuesday, October 25, 2011 2:37 PM
English | 23
f Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
f If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
f Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the
rate for which it was designed.
f Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
f Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
f Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
f Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
f Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
f Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 24 Tuesday, October 25, 2011 2:37 PM
24 | English
Battery tool use and care
f Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
f Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
f When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
f Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Service
f Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
Safety Warnings for Screwdrivers
f Hold power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
f Hold the machine with a firm grip. High reaction torque can briefly
occur while driving in and loosening screws.
f Always wait until the machine has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over
the power tool.
f Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direction switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
Protect the power tool against heat, e. g., against continuous intense sunlight, fire, water, and moisture. Danger of
explosion.
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 25 Tuesday, October 25, 2011 2:37 PM
English | 25
f In case of damage and improper use of the battery, vapours may be
emitted. Provide for fresh air and seek medical help in case of
complaints. The vapours can irritate the respiratory system.
Safety Warnings for Battery Chargers
Keep the battery charger away from rain or moisture. Penetration of water in the battery charger increases the risk of an
electric shock.
f Only charge Bosch lithium ion batteries or batteries installed in
Bosch products with the voltages listed in the technical data. Otherwise there is danger of fire and explosion.
f Keep the battery charger clean. Contamination can lead to danger of
an electric shock.
f Before each use, check the battery charger, cable and plug. If damage is detected, do not use the battery charger. Never open the
battery charger yourself. Have repairs performed only by a qualified technician and only using original spare parts. Damaged battery chargers, cables and plugs increase the risk of an electric shock.
f Do not operate the battery charger on easily inflammable surfaces
(e. g., paper, textiles, etc.) or surroundings. The heating of the battery charger during the charging process can pose a fire hazard.
f Supervise children. This will ensure that children do not play with the
charger.
f Children or persons that owing to their physical, sensory or mental
limitations or to their lack of experience or knowledge, are not capable of securely operating the charger, may only use this charger
under supervision or after having been instructed by a responsible
person. Otherwise, there is danger of operating errors and injuries.
Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service
agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard
and should never be inserted into a mains socket elsewhere.
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 26 Tuesday, October 25, 2011 2:37 PM
26 | English
Product Description and Specifications
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws.
Product Features
The numbering of the product features refers to the illustration of the machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Rubber cap
4 Indicator for right rotation
5 Battery charge-control indicator
6 Indicator for left rotation
7 Suspension hook
8 On/Off switch
9 Rotational direction switch
10 “PowerLight”
11 Handle (insulated gripping surface)
12 Battery charger
13 Eccentric driver head*
14 Angle driver head*
15 Torque attachment*
16 Torque presetting ring*
17 Torque-setting mark*
18 Release ring*
*Accessories shown or described are not part of the standard delivery scope of
the product. A complete overview of accessories can be found in our accessories program.
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 27 Tuesday, October 25, 2011 2:37 PM
English | 27
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
Max. torque for hard/soft screwdriving application according to
ISO 5393
Max. screw dia.
Weight according to
EPTA-Procedure 01/2003
Battery
Capacity
Number of battery cells
Battery Charger
Article number
Charging time
Protection class
V=
min-1
IXO
3 603 J81 0..
3.6
215
Nm
mm
4.5/3
5
kg
0.3
Li-Ion
1.3
1
Ah
2 607 225 809 (EU)
2 607 225 811 (UK/SMA)
2 607 225 813 (AU)
min
330
/II
Please observe the article number on the type plate of your machine. The trade names
of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product is less than
70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K determined
according to EN 60745:
Screwdriving without impact: ah <2.5 m/s2, K=1.5 m/s2.
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 28 Tuesday, October 25, 2011 2:37 PM
28 | English
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product described under “Technical Data” is in conformity with the following standards or
standardization documents: EN 60745 (battery powered products) and
EN 60335 (battery chargers) according to the provisions of the directives
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
11
Dr. Egbert Schneider
Dr. Eckerhard Strötgen
Senior Vice President
Engineering Director
Engineering
PT/ESI
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
06.09.2011
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 29 Tuesday, October 25, 2011 2:37 PM
English | 29
Assembly
f Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direction switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
Battery Charging (see figure A)
f Do not use other battery chargers. The supplied battery charger is
designed for the Lithium-Ion battery in your machine.
f Observe the mains voltage! The voltage of the power supply must
correspond with the data given on the nameplate of the battery charger. Battery chargers marked with 230 V can also be operated with
220 V.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time.
The Lithium-Ion battery can be charged at any time without reducing its
service life. Interrupting the charging procedure does not damage the battery.
The Lithium-Ion battery is protected against deep discharging. When the
battery is discharged, the machine is automatically switched off by a protective circuit: The inserted tool no longer moves and a slight whistling
noise can be heard.
WARNING Do not continue to press the On/Off switch after
the machine has been automatically switched
off. The battery can be damaged.
When the battery charge-control indicator 5 lights up red while the
On/Off switch 8 is depressed half way, then the battery has less than
30% of its capacity and should be charged.
The charging procedure starts as soon as the main plug of the battery
charger is inserted into the socket and the cordless screwdriver is afterwards placed on the battery charger 12.
The battery charge-control indicator 5 indicates the charging progress.
The indicator lights up green during the charging process. When the battery charge-control indicator 5 is no longer lit, the battery is fully charged.
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 30 Tuesday, October 25, 2011 2:37 PM
30 | English
During the charging procedure, the handle of the machine warms up. This
is normal.
Disconnect the battery charger from the mains supply when not using it
for longer periods.
The power tool cannot be used during the charge procedure; it is not defective when inoperative during the charging procedure.
f Protect the battery charger against moisture!
Observe the notes for disposal.
Changing the Tool (see figure B)
f Do not use double-sided screwdriver blades that are longer than
25 mm.
Insert the screwdriver bit 1 directly into the tool holder 2.
Eccentric Driver Head/Angle Driver Head/Torque Attachment (see figures C – F)
The eccentric driver head 13 enables screwdriving close to edges.
The angle driver head 14 enables screwdriving at hard to reach locations.
With the torque presetting ring 16 on the torque attachment 15, the requested torque can be preset in 10 steps. With the correct setting, the
tool bit is stopped as soon as the screw is driven flush into the material or
when the set torque is reached.
Assembly (see figures C–D)
For assembly of the attachments, pull the rubber cap 3 off toward the
front. Afterwards the attachments can be mounted. The attachments can
be mounted offset by 45°.
Dismounting (see figures E–F)
To dismount the attachments, turn the release ring 18 in rotation direction n and pull the attachment off toward the front. Afterwards, mount
the rubber cap 3 again.
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 31 Tuesday, October 25, 2011 2:37 PM
English | 31
Operation
Starting Operation
Reversing the Rotational Direction
The rotational direction switch 9 is used to reverse the rotational direction
of the machine. However, this is not possible with the On/Off switch 8 actuated.
Right rotation: For driving in screws, push the rotational direction switch
9 left to the stop.
The indicator for right rotation 4 lights up when the On/Off
switch 8 is actuated and the motor is running.
Left Rotation: For loosening or unscrewing screws, push the rotational
direction switch 9 right to the stop.
The indicator for left rotation 6 lights up when the On/Off switch
8 is actuated and the motor is running.
Switching On and Off
To start the machine, press the On/Off switch 8 and keep it pressed.
The power light 10 lights up when the On/Off switch 8 is slightly or completely pressed, and allows the work area to be illuminated when lighting
conditions are insufficient.
To switch off the machine, release the On/Off switch 8.
Fully automatic spindle locking (Auto-lock)
The drill spindle is locked when the On/Off switch 8 is not pressed.
This enables screws to be screwed in, even when the battery is empty and
allows for the machine to be used as a screwdriver.
f When the drilling spindle is locked, do not press the On/Off switch
8 for more than 15 seconds. Otherwise the power tool can be damaged.
Working Advice
f Apply the power tool to the screw only when it is switched off. Rotating tool inserts can slip off.
Up to 13 screwdriver bits can be stored on the side of the battery charger
12. The fixture that holds the screwdriver bits can be removed.
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 32 Tuesday, October 25, 2011 2:37 PM
32 | English
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direction switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
f For safe and proper working, always keep the machine and ventilation slots clean.
When the battery is no longer operative, please refer to an authorised after-sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety hazard.
If the machine should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Our customer service representatives can answer your questions concerning possible applications and adjustment of products and accessories.
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 33 Tuesday, October 25, 2011 2:37 PM
English | 33
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Bosch Power Tools
2 609 005 792 | (25.10.11)
OBJ_BUCH-826-006.book Page 34 Tuesday, October 25, 2011 2:37 PM
34 | English
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements. The user can transport the batteries by road
without further requirements.
When being transported by third parties (e.g.: air transport or forwarding
agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert
for hazardous material is required.
Disposal
The machine, rechargeable batteries, accessories and packaging
should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into
household waste!
2 609 005 792 | (25.10.11)
Bosch Power Tools
OBJ_BUCH-826-006.book Page 35 Tuesday, October 25, 2011 2:37 PM
English | 35
Only for EC countries:
According to the European Guideline 2002/96/EC,
power tools that are no longer usable, and according to
the European Guideline 2006/66/EC, defective or
used battery packs/batteries, must be collected separately and disposed of in an environmentally correct
manner.
Batteries no longer suitable for use can be directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Battery packs/batteries:
Li-ion:
Please observe the instructions in section “Transport”, page 34.
f Integrated batteries may only be removed for disposal. Opening
the housing shell can damage or destroy the power tool.
When removing the battery from the machine, actuate the On/Off switch
8 until the battery is completely discharged. Unscrew the screw in the
casing and take off the casing shell. Disconnect the connections on the
battery and remove the battery.
Subject to change without notice.
Bosch Power Tools
2 609 005 792 | (25.10.11)
Download PDF

advertising