Yamaha RX-V775 User manual

UAB
1 Preparation
AV Receiver
Accessories
Check that the following accessories are supplied with the product.
 Remote control
 Batteries
(AAA, R03, UM-4) (x2)
Insert the batteries the right way round.
Easy Setup Guide
 AM antenna
English
 YPAO microphone
*The supplied FM antenna
varies depending on the
region of purchase.
 CD-ROM
(Owner’s Manual)
This document explains how to set up a 5.1- or 7.1-channel system and
play back surround sound from a BD/DVD on the unit.
 FM antenna
 Safety Brochure
 Easy Setup Guide
• The illustrations of the main unit and remote control used in this guide are of the RX-V775 (U.S.A.
model), unless otherwise specified.
To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/
Cables required for connections
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])
2 Placing speakers
Set up the speakers in the room using the following diagram as a reference.
For information on other speaker systems, refer to “Owner’s Manual”.
5.1-channel system
7.1-channel system
1
9
1
2
2
3
4
5
10° to 30°
9
3
10° to 30°
6
7
30 cm (1 ft) or more
1 Front speaker (L)
4
5
10° to 30°
10° to 30°
2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
7 Surround back speaker (R)
9 Subwoofer
2
En
3 Connecting speakers/subwoofer
• Under its default settings, the unit is configured for 8-ohm
speakers. When connecting 6-ohm speakers, set the unit’s
speaker impedance to “6  MIN”. For details, see “Setting the
speaker impedance” in “Owner’s Manual”.
1
Connect the front speakers (1/2)
to the FRONT (//\) terminals.
• Use a subwoofer equipped with built-in amplifier.
• The illustrations of the unit (rear) used in this section are of the
RX-V775.
Connect the center speaker (3) to the
CENTER terminal.
EXTRA SP
ZONE2/F.PRESENCE
• Before connecting the speakers, remove the unit’s power cable
from the AC wall outlet and turn off the subwoofer.
• Ensure that the core wires of the speaker cable do not touch
each other or come into contact with the unit’s metal areas. This
may damage the unit or the speakers. If the speaker cables
short circuit, “Check SP Wires” will appear on the front display
when the unit is turned on.
2
EXTRA SP
ZONE2/F.PRESENCE
The unit (rear)
The unit (rear)
SPEAKERS
FRONT
CENTER
SPEAKERS
SURROUND
FRONT
SURROUND BACK/BI-AMP
CENTER
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
SINGLE
1
SINGLE
1
2
2
SUBWOOFER
SUBWOOFER
■ Connecting speaker cables
Speaker cables have two wires. One is for connecting the
negative (–) terminals of the unit and the speaker, and the
other is for the positive (+) terminals. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminals.
a Remove approximately 10
mm (3/8”) of insulation
from the ends of the
speaker cable and twist
the bare wires of the cable
firmly together.
+ (red)
b
c
FR
ON
9
T
d
1
2
1
3
9
2
3
a
4
– (black)
5
4
5
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.
Using a banana plug
(U.S.A., Canada, China,
Australia and General
models only)
a Tighten the speaker
terminal.
Banana plug
a
FR
ON
T
b
b Insert a banana plug into the end of the terminal.
En
3
3
Connect the surround speakers
(4/5) to the SURROUND (//\)
terminals.
4
Connect the subwoofer (9) to the
SUBWOOFER PRE OUT (1) jack.
• Use a subwoofer equipped with built-in amplifier.
EXTRA SP
ZONE2/F.PRESENCE
EXTRA SP
ZONE2/F.PRESENCE
The unit (rear)
SPEAKERS
CENTER
Connect the surround back speakers
(6/7) to the SURROUND BACK (//\)
terminals.
EXTRA SP
ZONE2/F.PRESENCE
The unit (rear)
FRONT
For 7.1-channel system
The unit (rear)
SPEAKERS
SURROUND
FRONT
SURROUND BACK/BI-AMP
CENTER
CENTER
SPEAKERS
SURROUND
FRONT
SURROUND BACK/BI-AMP
CENTER
SINGLE
1
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
SINGLE
1
SINGLE
1
2
2
2
SUBWOOFER
SUBWOOFER
SUBWOOFER
Audio pin cable
1
9
4
2
1
3
9
5
4
2
1
3
9
5
En
3
4
5
6
4
2
7
4 Connecting external devices
Before connecting the power cable (General model only)
Make sure you set the switch position of
VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110-120/220-240 V, 50/60 Hz.
TV
Audio out
(optical)
HDMI in
HDMI out
HDMI
HDMI
BD/DVD player
OPTICAL
HDMI
O
a
HDMI
b Connect a TV to the unit with the other HDMI cable.
HDMI
HDMI 1
HDMI OUT
1
HDMI 1 jack
(BD/DVD)
c Connect a TV to the unit with a digital optical cable.
This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).
VOLTAGE SELECTOR
(General model only)
VOLTAGE SELECTOR
HDMI
OUT
jack
Connect external devices to the unit.
a Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to this unit.
HDMI
b
c
1
220V240V
2
ARC
d Connect the power cable to an AC wall outlet.
110V120V
O
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
HDMI 2
HDMI 3
HDMI 4
HDMI 5
(BD/DVD)
IN
1
OPTICAL
d
EXTRA SP
ZONE2/F.PRESENCE
AM
VIDEO
FM
(TV)
AV4
COMPONENT
VIDEO
COAXIAL
(RADIO)
PR
ANTENNA
AV3
Y
PR
PB
SPEAKERS
PB
AV 4 (OPTICAL) jack
AV2
VIDEO
VIDEO
• For information on how to connect radio antennas or other
external devices, see “PREPARATIONS” in “Owner’s Manual”.
To an AC wall
outlet
REMOTE
OPTICAL
(TV)
AV4
2
ARC
OUT
FRONT
OPTICAL
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
2
Turn on the unit, the TV and the BD/DVD
player.
3
Use the TV remote control to change the
TV input to video from the unit.
Y
AV 1
MONITOR OUT
COMPONENT VIDEO
SINGLE
SINGLE
1
2
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
FRONT
ZONE OUT
SURROUND
SUR. BACK
PRE OUT
SUBWOOFER
The unit (rear)
The connections are complete. Proceed to the next
page to optimize the speaker settings.
MAIN ZONE
PURE DIRECT
Turn on the unit
ZONE 2
ZONE CONTROL
INFO
MEMORY
PRESET
FM
AM
TUNING
INPUT
VOLUME
SCENE
BD
DVD
PHONES
YPAO MIC
TONE CONTROL
TV
NET
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
VIDEO AUX
HDMI/
MHL 5V 1A
VIDEO
5V
• By connecting a TV to the unit with an HDMI cable, you can
configure the unit’s settings with the menu displayed on the TV. In
addition, you can select the on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese. For details, refer to “Owner’s Manual”. In this guide,
illustrations of English menu screens are used as examples.
2.1A
The unit (front)
En
5
5 Optimizing the speaker settings automatically (YPAO)
1
The following screen appears on the TV.
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the
distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your room.
• During the measuring process, test tones are output at high volume. Ensure that the test
tones do not frighten small children. Also, refrain from using this function at night when it
may be a nuisance to others.
Connect the YPAO microphone to the
YPAO MIC jack on the front panel.
RECEIVER
SOURCE
RECEIVER
HDMI
1
2
3
4
• During the measuring process, you cannot adjust the volume.
5
V-AUX
• During the measuring process, keep the room as quiet as possible.
AV
• Do not connect headphones.
1
2
3
5
6
1
4
TUNER
USB
NET
AUDIO
• Do not stand between the speakers and the YPAO microphone during the measurement
process (about 3 minutes).
• Move to the corner of the room or leave the room.
MAIN
PARTY
ZONE 2
2
HDMI OUT
• To cancel the operation, disconnect the YPAO microphone
before starting the measurement.
SCENE
BD
DVD
Preparing for YPAO
Turn on the subwoofer and set
the volume to half. If the
cross-over frequency is
adjustable, set it to maximum.
TV
NET
PROGRAM
The unit (front)
MUTE
RADIO
YPAO MIC
TOP MENU
POP-UP/MENU
ON
SCREEN
Cursor keys
ENTER
RETURN
CROSSOVER/
HIGH CUT
RETURN
To start the measurement, use the cursor
keys to select “Measure” and press
ENTER.
The measurement will start in 10 seconds.
OPTION
ENTER
VOLUME
2
VOLUME
The following screen appears on the TV when
the measurement finishes.
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MIN
MAX
MIN
MAX
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
YPAO microphone
1
2
3
5
6
7
9
0
4
8
MEMORY
10
ENT
TV
INPUT
TV VOL
Ear height
Place the YPAO microphone at your
listening position (same height as your
ears). We recommend the use of a
tripod as a microphone stand. You can
use the tripod screws to fix the
microphone in place.
6
En
MUTE
TV CH
CODE SET
• If the cursor keys do not work, press RECEIVER and then use
the cursor keys.
• If any error message (such as E-1) or warning message (such
as W-2) appears, see “Error messages” or “Warning
messages” in “Owner’s Manual”.
• If the warning message “W-1:Out of Phase” appears, see
“If “W-1:Out of Phase” appears” (next page).
3
4
Use the cursor keys to select
“Save/Cancel” and press ENTER.
Use the cursor keys to select “SAVE” and
press ENTER.
If “W-1:Out of Phase” appears
Follow the procedure below to check the speaker
connections.
a Use the cursor keys to select “Result” and press ENTER.
b Use the cursor keys to select “Wiring”.
c Check the cable connections (+/–) of the speaker that
was identified as being “Reverse” in the warning
message.
If the speaker is connected correctly:
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
In this case, you can ignore the message.
5
Disconnect the YPAO microphone from the
unit.
This completes optimization of the speaker settings.
Press RETURN and proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.
• The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment).
En
7
6 Playing back a BD/DVD
Now let’s play back a BD/DVD.
We recommend playing back multichannel audio
(5.1-channel or more) to feel surround sound produced
by the unit.
Many more features!
1
VOL.
HDMI1
RECEIVER
SOURCE
Press HDMI 1 to select “HDMI 1” as the
input source.
L
SL
SW
C
R
SR
HDMI
1
2
3
4
5
HDMI 1
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
3
2
TV
NET
PROGRAM
MUTE
Press STRAIGHT repeatedly to select
“STRAIGHT”.
VOLUME
STRAIGHT
VOLUME
4
L
SL
SW
C
R
SR
Press VOLUME to adjust the volume.
VOL.
TOP MENU
Volume -30.0dB
POP-UP/MENU
ON
SCREEN
OPTION
L
SL
SW
C
R
SR
This completes the basic setup procedure.
ENTER
RETURN
If surround sound is not working
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
9
0
7
Sound is only being output from the front speakers
during multichannel audio playback
4
Check the digital audio output setting on the BD/DVD
player.
8
It may be set to 2-channel output (such as PCM).
ENHANCER PURE DIRECT
3
STRAIGHT
MEMORY
10
ENT
TV
No sound is coming from a specific speaker
INPUT
TV VOL
MUTE
TV CH
CODE SET
Connecting other playback
devices
Connect audio devices (such as CD player),
game consoles, camcorders, and many others.
Selecting the sound mode
VOL.
RADIO
Please refer to “Owner’s Manual” on the supplied
CD-ROM to help you get the most out of the unit.
Start playback on the BD/DVD player.
HDMI OUT
SCENE
BD
DVD
The unit has various other functions.
See “Troubleshooting” in “Owner’s Manual”.
Select the desired sound program (CINEMA
DSP) or surround decoder suitable for movies,
music, games, sports programs, and other uses.
Playing back from iPod
By using a USB cable supplied with iPod, you
can enjoy iPod music on the unit.
■ Listening to FM/AM radio
■ Playing back music stored on
a USB storage device
■ Playing back the network
contents
■ Selecting the input source and
favorite settings at once
For more information, see “What you can do
with the unit”.
© 2013 Yamaha Corporation Printed in Malaysia ZF59300