1 - iP SecuritySales
ELK Products, Inc
PO Box 100
Hildebran, NC 28637
Phone: (800) 797-9355
Fax: (828) 397-4415
www.elkproducts.com
Physical Address:
3266 US Hwy 70 West
Connellys Springs, NC 28612
SALES
(800) 797-9355
[email protected]
CUSTOMER SERVICE
(800) 797-9355
[email protected]
Sales & Customer Service Hours:
8:00am - 5:00pm EST Mon. - Fri.
TECHNICAL SUPPORT
(800) 797-9355
[email protected]
Tech Support Hours:
8:00am - 6:45pm EST Mon. - Thurs.
8:00am - 5:00pm EST Friday
Our Mission
To provide cost-effective and innovative security and automation
solutions to the professional trade with unsurpassed product quality
and technical support.
What We Do
With one of the best warranties in the industry, Elk is known as a
premium alarm and automation manufacturer with a complete product
line including controls, speakers, sirens, power supplies, timers, relays,
PLCs, recordable voice units and a great battery tester. We challenge
our customers to come up with a problem that can’t be solved by one
of our products.
We call our M1 controls a “Cross Platform Control®” because they
provide more than security, more than automation. They actually allow
you to interface with more than 35 manufacturer’s products for total
control of home or business. Users can have a system as individual
as their needs. Our common sense approach provides economical
solutions for energy & task management, entertainment, security,
video surveillance, lighting, and remote control from one central brain
– M1. The ability to coordinate all the equipment under one authority
simplifies the usage and strengthens the reliability of the entire system.
Utilizing the energy management features of M1 can provide a pay
back of the system and the customer’s security monitoring as well.
Our M1 Gold version has a soothing voice for system alerts onsite and
over the phone, a menu for telephone remote control, and system
guidance. M1EZ8, while without voice capability, is a lower cost
version of the M1Gold with the same powerful Whenever/And/Then
rules programming engine, expandability, 32-bit processor with flash
memory and 2400 baud 2-way modem. Both versions allow you to
stay in touch and in control over the internet or intranet. M1’s English
Text Programming completely eliminates the learning curve for
installers, too.
Increase your market potential, stand out from the competition,
and provide safety, savings, and convenience to your customers.
Table of Contents
Security & Automation Controls
M1Gold & M1EZ8 Controls ...........................................................................................2-6
M1Gold & M1EZ8 Accessories, Expansion Modules..................................................7-17
Automation Accessories.................................................................................... 17-18
Structured Wiring................................................................................................. 18-19
ElkGuard® Security Systems & Accessories............................................... 20-21
Surge Suppressors.....................................................................................................21
Siren, Voice, & Recordable Drivers......................................................................22
Sirens/Speakers
Echo™ Paintable Speakers/Sirens.................................................................................23
Interior Speakers/Sirens.................................................................................................23
Stainless Steel Enclosed.................................................................................................24
Strobe Lights....................................................................................................................24
Multi-purpose Speakers/Sirens......................................................................................25
Power
Batteries...........................................................................................................................26
Battery Life Tester™.........................................................................................................26
Power Supplies........................................................................................................... 26-27
Transformers....................................................................................................................28
Power Distribution Units..................................................................................................28
Relays & Timers..........................................................................................................29
Programmable Controls...........................................................................................30
Communication Accessories. .......................................................................... 30-31
Universal Accessories. .............................................................................................31
Index by Part Number......................................................................................... 31-32
www.elkproducts.com
1-800-797-9355
1
Simplify life with an affordable, personalized system
Security & Safety
M1 Control Systems provide comprehensive, sophisticated
security solutions to keep what matters most safe & secure.
- Provides detection and reporting for:
• Intrusion
• Water Leaks
• Fire & Carbon Monoxide
• Hi/Low Temperatures
• Medical Emergencies
• and more...
- Enhance security with video surveillance
- Lighting Control for added safety & security
• Light an exterior pathway from inside the car or by arming your
system
• Light an interior pathway or stairway based on motion
Energy Management
M1 Control Systems help protect the environment and
reduce utility bills, without sacrificing comfort. Our
energy management solutions provide convenient control
and scheduling capabilities for :
• Lighting
• Climate Control
• Shades/Blinds
• Electric Water Heaters
• Other Electrical Devices
Home & Business Control
When you consider the size and complexity of today’s
homes and businesses, keeping up with everything can
be overwhelming. M1 Control Systems allow control of
the entire home or business from a single, easy to use,
sophisticated control system.
In addition to security and energy management, also control:
• Sprinklers
• Garages/Doors/Gates
• Water Shut Off
• Pool/Spa pumps
• Audio Systems
• and more...
2
Experience the M1 Control System
User Interfaces
With today’s hectic lifestyle, your clients need a system
that provides simple control of their home or business.
M1 systems offer a variety of options to control home or
business, on site or off site, including:
•
•
•
•
Simple Arming Stations
State-of-the-Art Touchscreens
LCD Keypads
Keychain Remotes
• Phones
• PCs/PDAs
• Internet
Stay in Constant Contact with the System
M1 can provide on site alerts via voice announcements
and keypad alerts. M1 systems also provide notification of
important events via phone, email or text message.
On site and off site notifications include:
• Security & Safety Alerts
•
• Critical Temperatures
• Water Leaks
• Visitors/Deliveries
• Child Arriving Home from School
Reminders for:
▪ Replacing Air & Water Filters
▪ Replacing Smoke/Carbon Monoxide
Detector batteries
▪ Important Dates
Lighting
With M1, lighting control goes beyond energy savings to
provide added beautification and convenience.
• Easily activate lighting scenes that set multiple lights to varying
levels for just the right amount of light for any activity.
• Low energy lights can be activated based on your schedule
allowing you to move from room to room without turning lights on
and off.
• Selected lights can automatically turn on when it is dark outside
and back off when it is light outside.
3
M1 GOLD
Security & Automation Control
M1 Gold is commonly referred to as a Cross Platform® control due to the fact
that it can be networked with other industry standard systems. A 500+ word
vocabulary pleasantly announces system status, configurable in any sequence,
to alleviate user intimidation. The built-in voice dialer can call up to 8 phone
numbers and alert owners of status changes; such as, critical temperature
levels, water leaks, children arriving home from school, etc. Built-in telephone
remote control allows you to control temperature settings, water heater, garage
door, lighting, and sprinklers plus arming/disarming system and more; by
simply picking up the phone – any phone.Optional Ethernet port allows for
programming,monitoring, and control over LAN or Internet without the need for
a dedicated “24/7” server. Integrators and Installers will value the flash memory
firmware, RS-232 serial port, Ethernet connectivity option, and PC programming
in English text.The LCD keypads have programmable task keys, a navigation key
to access system status and automation tasks, plus large character display.
S E C U R IT Y • L IG H T I N G • ENERGY & TASK MANAGEMENT
E N T E R TA I N M E N T • V I D E O SURVEILLANCE • REMOTE CONTROL
M1 Gold Control board only (in clam shell case)
ELK-M1GCB
ELK-M1GOLD
Main M1 Gold circuit board in the clam shell protective case - “the brick”.
• For use in structured wiring enclosures, trim-outs on pre-wired jobs, or as a
spare or replacement board.
• Can be mounted directly to almost any surface.
• Plug-in terminal blocks are not included, order separately as ELK-M1BLOCKS.
• Size: 8.375”W x 10” H x 2” D
M1 Gold Control Board in SWB14 Metal Enclosure
M1 Gold Control Kit
with Enclosure (No Keypad)
Available Options for M1 Control Family:
4
• Ethernet Port
• Temperature Sensors
• Door Entry Control
• Serial Port Expanders
• Input/Output Expanders
• Two-Way Listen-In Kit
• Wireless Interface
• Audio/Video Interface
This “Ready to Install” value
package includes:
ELK-M1GSYS3
• M1 Gold Control Board
• ELK-SWB14 Enclosure
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable
Interior Speaker
• ELK-RJSET Telco Jack & Cord
M1 GOLD FEATURES:
• Flash Memory - Allows field updates to firmware
• 16 On-board Input Zones, expandable to 208, analog supported
• Wireless Capability, up to 144 zones with ELK Wireless Receiver
• 13 On-Board Outputs: 1 voice driver/siren, 1 siren driver/voltage,
1 form C relay, and 10 low current (50 mA)
• Two Way Listen-in capability:
- For Central Station alarm verification
- User activated through telephone remote control
• Voice announcement of alarms, zone descriptions, status, etc.
- 500+Word / Phrase Vocabulary
- Link up to 6 Words / Phrases per announcement
- 10 custom recordable Words / Phrases
• Built-in Telephone Remote makes any phone a keypad
• Integrated Voice Dialer uses vocabulary or custom word / phrases
• Phone Number Capacity: 8
• On-Board Serial Port, expandable to 8 Serial Ports
• Plug-in Terminals make service and pre-wires a snap!
• Installer Telephone (buttset) Test feature
• Master Power Switch and Low Battery Disconnect
• Multiple Auxiliary Power Terminals
• Built-in Volt and Current Meter
• Time/Date stamped 512 Event History Log
ELK-M1GSYS4
ELK-M1GK
• Menu driven keypad programming - No Manual Required!
• Supports 4 wire (any zone) and 2 wire (zone 16) smoke detectors
• Includes Fire Alarm Verification Routine
• Can be partitioned into 8 separate areas and accounts
• 199 User Codes (4 or 6 digit) with assignable authorities
• Arm levels: Away, Stay, Stay Instant, Nite, Nite Instant,Vacation
• Hardware “Watchdog” and Nonvolatile EEPROM Memory
• Telephone Line Fault with alarm output
• True Modem for fast reliable upload/download
• Digital Dialer: SIA, Contact ID, 4 + 2, and Pager (8 phone numbers)
• ElkRP PC Programming Software includes conflict resolution
• Powerful “Whenever/And/Then” RULES Programming
• Rules utilize easy to understand text based references
• Control Lighting using on-board 2-way Power Line Carrier (PLC) or RS-232
Serial Port for On,Off, Pre-set Dim, All On, All Off, and Scenes/Commands
• Astronomical Clock for Sunset/Sunrise calculation and activation
• Transmit and Receive Custom Serial ASCII strings
• Read Temperature Sensors and communicate with up to 16 Thermostats
• Turn on Tasks, Lights, and Outputs via Keypad,Touchscreen, and PC browser
• Interfaces with a broad range of other systems
• Heavy duty - 2.5 Amp power supply w/ 1 Amp continuous
• Dynamic Battery Test, Zone Voltage Display, and Voltmeter
• PTC (fuseless) resettable overload protection
M1 Gold Control Kit
with Enclosure
M1 Gold Control Kit
with Enclosure
This “Ready to Install” value
package includes:
This “Ready to Install” value
package includes:
• M1 Gold Control Board
• ELK-M1KP LCD Keypad
• ELK-SWB14 Enclosure
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable
Interior Speaker
• ELK-RJSET Telco Jack & Cord
• M1 Gold Control Board
• ELK-M1KP2 LCD Keypad
• ELK-SWB14 Enclosure
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable
Interior Speaker
• ELK-RJSET Telco Jack & Cord
ELK-M1GSYS4S
M1 Gold Control Kit
without Enclosure
M1 Gold Control Kit
without Enclosure
This “Ready to Install” value
package includes:
This “Ready to Install” value
package includes:
• M1 Gold Control Board
• ELK-M1KP LCD Keypad
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable
Interior Speaker
• ELK-RJSET Telco Jack & Cord
• M1 Gold Control Board
• ELK-M1KP2 LCD Keypad
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable
Interior Speaker
• ELK-RJSET Telco Jack & Cord
ELK-M1GKS
28” structured wiring box may be ordered separately.
Part # ELK-SWB28
5
M1EZ8
Economical Security & Automation Control
M1EZ8 offers an economical solution for installations not requiring the
voice and telephone remote control capability of the M1 Gold. Built on the
same software architecture as M1 Gold, the possibilities for expansion,
networking with other systems, and option for programming and control
over the internet make M1EZ8 an exceptional value. The chart below
outlines the key differences between the M1 Gold and M1EZ8.
Key Differences Between M1 Gold and M1EZ8
M1 Gold
M1EZ8
Voice Capability
• Voice Announcements
• Built-in Telephone Remote Control
• Integrated Voice Dialer
No Voice Capability
16 On-board Input Zones, expandable to 208
8 On-board Input Zones, expandable to 200
13 On-board Outputs, expandable to 205
• 1 voice driver/siren
• 1 siren driver/voltage
• 1 formCrelay
• 10 low current voltage (50 mA)
12 On-board Outputs, expandable to 204
• 1 siren driver/voltage
• 1 form C relay
• 10 low current voltage (10 mA)
On-Board Serial Port
Serial Port available with addition of
ELK-M1EZ8MSI Main Serial Port Interface
Plug-In Terminals
Non-removable screw terminals
4 Power Terminals - 3 Auxiliary, 1 Switched Smoke
2 Power Terminals, 1 Auxiliary, 1 Switched Smoke
Master Power Switch and Low Battery Disconnect
Master Power Switch and Low Battery Disconnect switch
available with addition of ELK-965
Zone Voltage Display and Volt/Current Meter
Zone Voltage Display and Voltmeter
Two Way Listen-In Capability:
• For Central Station Alarm Verification
• User activated through telephone remote control
Two Way Listen-In Capability:
• For Central Station Alarm Verification Only
M1EZ8 Control board only
ELK-M1EZ8CB
ELK-M1EZ8
• For use in structured wiring enclosures, trim-outs on pre-wired jobs, or as a
spare or replacement board
• Can be mounted directly to almost any surface.
• Mounting Hardware Included
• Size: 6.5”W x 6.75” H x 1.5” D
M1EZ8 Control Board with 12” x 12” Metal Enclosure
M1EZ8 Control Kits With Enclosure
ELK-M1EZ8KB Pictured
These “ready to install” value packages include the M1EZ8
Control, UB12 metal enclosure, either a M1KP LCD Keypad
(ELK-M1EZ8KB) or the smaller M1KP2 LCD Keypad
(ELK-M1EZ8KBS), ELK-1250 5Ah battery, ELK-RJSET, SP35
speaker, plus Lifetime warranted ELK-TRG1640 transformer.
M1EZ8 Control Kits Without Enclosure
ELK-M1EZ8KS Pictured
6
These “ready to install” value packagesz include the M1EZ8
Control, either a M1KP LCD Keypad (ELK-M1EZ8K) or the
smaller M1KP2 LCD Keypad (ELK-M1EZ8KS), ELK-1250 5Ah
battery, ELK-RJSET, SP35 speaker, plus Lifetime warranted
ELK-TRG1640 transformer.
ELK-M1EZ8KB ELK-M1EZ8KBS
ELK-M1EZ8K
ELK-M1EZ8KS
M1 User Interfaces
7” LCD Color Touchscreen / Monitor
The ELK-TS071 is an in-wall mount 7” LCD color touchscreen designed to operate with the M1Gold and M1EZ8 controls.
It features a super bright TFT display, powerful microprocessor, and includes Elk’s Remote Management Software (RMS)
The easy to use graphical interface is designed to simplify the operation of both security and automation. Its low profile
design satisfies the most discriminating taste.
This touchscreen connects to an M1Gold or M1EZ8 control over a local network via its on-board Ethernet port (ELKM1XEP required to connect the M1Gold or M1EZ8 control to network). When connected to a LAN that has high speed
internet service, the TS071 is fully capable of internet browsing. Internet Explorer is pre-installed as part of the Windows
CE operating system.
The RMS software allows control of many aspects of the system including security, lighting, climate, outputs, distributed
audio etc. The software also permits viewing of video imagery from certain brands of IP access cameras and DVRs*, with
no additional equipment to purchase! RMS also allows access to up-to-date weather and traffic information and provides
"Links" for easy access to frequently visited websites.
• Low Profile, Streamlined Bezel Design
• Dimmable Backlight
• 1 Ethernet 10/100 Port
• 2 USB “Host” Accessory Ports
• Built-in Speaker and Microphone
• Ships complete with RMS Remote Management Software
• Screen Type: Full TFT, Color, Super Bright Display
• Screen Size: 7” Diagonal
• Resolution: 800 x 480 Wide VGA
• Processor: 312 MHz ARM processor
• Memory: 64 MB DRAM, 128 MB NAND Flash
• Operating System: Windows CE
• Overall size: 8.875”W x 6.3” H x .3” D
*For an updated list of supported video cameras, DVRs, and Audio components please visit www.elkproducts.com
ELK-TS071
Touchscreen with Power Supply
• Includes 12VDC, 1.5 Amp Plug-in Power Supply (ELK-P1216)
ELK-TS071P
Touchscreen with POE (Power Over Ethernet) Components
• Includes Power Injector and Power Splitter (ELK-POE12K)
IMPORTANT NOTE: The ELK-TS071 cannot be used directly with a POE switch or hub. To power via POE over network cabling, order the ELK-TS071P
which includes a PoE injector and splitter, or purchase the POE injector and splitter separately (ELK-POE12K).
The TS071 is the successor to the older TS07 touchscreen and utilizes a smaller rough opening, [7.5” x 5.38”] vs. [8” x 6.31”].
7
LCD Keypad
The ELK-M1KP is an addressable LCD Keypad for M1 Controls. It features a 32 character, backlit
display with adjustable intensity and extra large character fonts, improving readability. Six (6) function
(“F”) keys can be programmed to contact emergency services or perform tasks; such as, controlling
lights, watering the lawn, closing or opening the garage door, etc. The ELK navigation keys easily guide
you through the full list of automation tasks, programming, systems diagnostics, and more. An optional
plug-in proximity reader is available allowing prox card or fob arming, disarming, door strike control, etc.
The fold down door features magnetic closure and can be completely removed, if desired.
ELK-M1KP
• Backlit, Large Character LCD Display,
16 x 2 lines
• Six (6) programmable function keys
• Unique Menu Navigation/Direction keys
• Adjustable volume for tones/chime
• Accepts Plug-in Proximity Reader (ELK-M1PR)
or “External” 26 bit Wiegand Prox Reader
• Built-in Temperature Sensor
• Input for 1 Supervised Zone
• One Programmable “Switched Positive”
Voltage Output
• Exit, Stay, Chime, and Bypass Keys
• Programmable display of time,
date, & temperature
• Displays system diagnostics and settings
ELK-M1KPB
• Input Connection: 6 Pin Plug-In "Flying Lead"
Connector (Included)
• Operating Voltage: 13.8 Volts DC
•Current Draw: 40-50mA Idle (low backlight,
sound silent) 160mA fully active
• Color: Glacier White
• Size: 6.875" x 5.25" x 1.375"
Connect any 26-bit Wiegand External Proximity
Reader to the ELK-M1KP or ELK-M1KPB using
the ELK-W035A wiring harness (not included).
Two Models Available:
ELK-M1KP
Green LCD Display
ELK-M1KPB
Blue LCD Display
Arming Station
Small, economical, arm/disarm station for M1 Controls fits into single gang box and utilizes a standard
decorator style faceplate (not included). Displays basic system status with 3 LEDs: Green “Ready”,
Yellow “Trouble”, and Red “Armed”. The 12 button keypad is backlit with blue LEDs and has quick
arm keys for “Exit” and “Stay”. The M1KPAS also provides access to six (6) programmable function
operations by pressing the “F” (Function) key followed by one of the keys (1 thru 6).
ELK-M1KPAS
• Blue Backlit Keys
• Instant Activation of 6 Tasks
• Built-in Piezo Sounder
• Quick Arm Exit & Stay Keys
• LED Status Indication
• Connection: 4 Pin Plug-in
“Flying Lead” Connector (Incl.)
• Color: White
• Operating Voltage: 13.8VDC
• Size: 1.81” x 2.75” x 1.13”
Keypad Feature Comparison
ELK-M1KPB
ELK-M1KPAS
6.87”W x 5.25”H x 1.32”D
6.87”W x 5.25”H x 1.32”D
1.81”W x 2.75”H x 1”D
Door Cover
Yes
Yes
No
Zone Input
Yes (1)
Yes (1)
No
Programmable Output
Yes (1)
Yes (1)
No
Yes- Internal & External
Yes- Internal & External
No
Yes
Yes
No
Physical Dimensions
Optional 26-Bit Wiegand
Proximity Reader
Internal Temp Sensor
8
ELK-M1KP
Function “F” Keys
6
6
6- Press “F” Key, then 1-6
LCD Backlighting
Green
Blue
N/A
Key Backlighting
Amber
Amber
Blue
Mounting Options
Surface Mount Only
Surface Mount Only
Mounts in Std. Electrical Box
Low Profile LCD Keypad
The ELK-M1KP2 is a low profile, addressable LCD Keypad for M1 Controls. It features a 32 character
blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK
menu navigation keys. It may also be recessed, “flush” mounted, using a separately purchased back
box kit (ELK-M1BBK2).The M1KP2 is compatible with “external” 26 bit Wiegand proximity readers,
allowing cards or fobs to be used for arming, disarming, or limited door strike control, etc.
ELK-M1KP2
• Blue/white Backlighted Hi-Contrast LCD Display
• Four (4) Programmable Function Keys
• Unique Menu Navigation/Direction Keys
• Tones/Chime
• Accepts “External” 26 bitWiegand Prox Reader
• Input for 1 Supervised Zone
• One Programmable “Switched Positive”
Voltage Output
• Exit, Stay, Chime, and Bypass Keys
• Programmable display of time & date
• Displays system diagnostics and settings
• Surface mounts to a standard 1 or 2 gang
electrical box
• Optional recessed, “flush” mount, kit available
(ELK-M1BBK2)
• Connection: 6 Pin Plug-in "Flying Lead"
Connector (Incl.)
• Color: White
• Operating Voltage: 13.8VDC
• Current Draw: 40-50 mA Idle (low back light
level, sounder silent) 160 mA Fully Active (max.
back light & sounder active)
• Size: 4.658" x 5.5" x .95" (.375" D with
recess mount)
• Optional ELK-M1BBK2 Recess Back Box Size:
4.312” x 5.375” x 1”
Connect any 26-bit Wiegand External Proximity
Reader to the ELK-M1KP2 using the
ELK-W039A wiring harness (not included).
LCD Keypad
The ELK-M1KP3 is an addressable, surface mount LCD Keypad for M1 Controls. It features a 32
character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with
the ELK menu navigation keys. The M1KP3 is compatible with “external” 26 bit Wiegand proximity
readers, allowing cards or fobs to be used for arming, disarming, or limited door strike control, etc. It
features a hinged door over the keys.
ELK-M1KP3
• Blue/white Backlighted Hi-Contrast LCD Display
• Four (4) Programmable Function Keys
• Unique Menu Navigation/Direction Keys
• Tones/Chime
• Accepts “External” 26 bitWiegand Prox Reader
• Input for 1 Supervised Zone
• One Programmable “Switched Positive”
Voltage Output
• Exit, Stay, Chime, and Bypass Keys
• Programmable display of time & date
• Displays system diagnostics and settings
• Surface mount only without electrical box
• Connection: 6 Pin Plug-in "Flying Lead"
Connector (Included)
• Color: White
• Operating Voltage: 13.8VDC
• Current Draw: 40-50 mA Idle (low back light
level, sounder silent) 160 mA Fully Active (max.
back light & sounder active)
• Size: 3.97" x 5.425" x 1.19"
Connect any 26-bit Wiegand External Proximity
Reader to the ELK-M1KP3 using the
ELK-W039A wiring harness (not included).
Keypad Feature Comparison
M1KP2
M1KP3
4.65”W x 5.5”H x 1.32”D
3.97”W x 5.43”H x 1.19”D
Door Cover
No
Yes
Zone Input
Yes (1)
Yes (1)
Programmable Output
Yes (1)
Yes (1)
Yes- External Only
Yes- External Only
No
No
Physical Dimensions
Optional 26-Bit Wiegand
Proximity Reader
Internal Temp Sensor
Function “F” Keys
4
4
LCD Backlighting
Blue
Blue
Key Backlighting
Blue
Blue
Mounting Options
Surface or Flush Mount*
Surface Mount Only
*requires M1BBK2
9
ELK-RM
Remote Management Software (RMS)
Consumer Software Designed for PCs and Elk Touchscreens*
RMS provides a powerful graphic interface to the M1Gold and
M1EZ8 controls. This redesigned software allows control of many
aspects of the system including security, lighting, climate, tasks,
outputs, audio** and more. RMS also provides access to video
imagery from certain brands of IP accessible cameras and DVRs,
weather information, and links to frequently visited websites.
The software connects to an M1Gold or M1EZ8 control through
the main serial port or over a local network (network
connectivity requires the ELK-M1XEP Ethernet Interface).
Software setup is a snap with the convenient synchronize feature,
which automatically populates each page based on system
programming. RMS can be customized to the installation by
hiding unused categories.
System Requirements:
• Supported Operating Systems (PC): Windows 98SE, ME, 2000 (Service Pack 3) , XP Home & Pro (Service Pack 2), or Server 2003
• Computing Device running Microsoft .NET 2.0 Framework
** RMS included on ELK Touchscreens
• Total Disk Space Requirements: 285 MB
** Distributed Audio partners currently include: Russound, Nuvo, and Proficient.
(280 MB for .NET 2.0 and 5 MB for ElkRM)
Additional hardware and firmware revisions may be required. For complete
details including a listing of compatible partner product model numbers,
• Memory Requirements: Minimum 64 MB RAM
including IP cameras, DVRs, etc. please visit www.elkproducts.com
• Screen Resolution: 800 x 480
When Ordering ELK-RM Please Note:
RMS PC Edition requires a product key license to obtain full functionality with a control. A product key license may be purchased through your Authorized
Elk Reseller. The serial number from the control must be provided to the reseller when ordering. Until a product key has been purchased and entered
into RMS, it will run in DEMO mode, allowing only limited functionality. If you wish to receive the license key via email without having a CD shipped to
you, please order Part# ELK-RMNCD
Graphic Designer Software for ElkRMS
ELK-RMDESIGNER
Due to these licensing requirements, ELK
has chosen to sell this product directly to
the professional installers and not through
distribution. Visit www.elkproducts.com for
more details.
RM Designer Software allows complete customization of the ElkRM Graphic User Inteface Software for
ELK-M1 Security & Automation Controls. Create totally unique custom pages, including backgrounds,
colors, buttons, text, information boxes, etc.
•Provides simple to complex graphic user
•Build designs directly to USB Flash drives or
interface customization
other removable storage for easy transfer to
•Create graphic interfaces of any size
ELK touchscreens
or resolution
•Built-in setup utility for audio, video, and links
•Easy to use background and button
•Easily share designs with Import feature
creation tools
•Supported Operating Systems: Win 2000, XP,
•Synchronization feature allows RMDesigner to
Vista, Server 2003
display item descriptions programmed into the
•Requires .NET 2.0 Framework
M1 Control
•Requires 20MB or more hard drive space
•Save setup & graphic changes to individual
•Requires minimum 1GHz Processor
project folders for future use
•Requires minimum 1GB RAM
Note: ElkRM skin with custom logo on Main (Home) page is availalble - ELK-CFD256. Call for details.
10
Integration & E x p a n s i o n a t a G l a n c e
Lighting Control
Lighting Controller
ELK-M1XSP
Serial Expander
Thermostat Control
Up to 16 Thermostats
ELK-M1XSP
Serial Expander
Wireless Expansion
Keychain Remotes
Compatible transmitters can be purchased through you local distributor. See
wireless receiver specifications for information on compatible transmitters
Door/Window Contacts
Motion Detectors
Glass Break
Detectors
Smoke Detectors
ELK-M1XRF(2G or 2H)
Wireless Receiver
Output Expansion
Shades/Blinds
Garage Doors
Gates
Sprinkler Systems
ELK-M1XOVR
Output Expander
Network & Internet
Connectivity
ELK-TS071
7” Touchscreen
Door Contact
Door Strike
or Mag Lock
ELK-M1KAM
Access Module
Internet
ELK-106055
Prox Reader
ELK-M1XEP
Ethernet Interface
ELK-M1DBH
Data Bus Hub
Door Entry
Control
For more details on integration and
expansion, including manuals and
hookup diagrams, please visit
www.elkproducts.com
11
M1 & EZ8 Accessories
M1 Ethernet Port Interface
Allows M1 Controls to be connected to the Internet or LAN (network) for programming, monitoring,
remote control, email notifications, etc. Requires permanent broadband connection; CableModem,
DSL,T1, etc.
ELK-M1XEP
• Includes Web Server with embedded Java
Applet "M1 Virtual Keypad"
• Secure connection with password protection
and HTTPS encryption
• Event notification via Email (SMTP)
• Supports automatic Dynamic DNS Updates with
providers using the DynDNS protocol
• Supports Network Time Protocol for
synchronizing the M1Gold/M1EZ8 clock with an
Internet time server
• LED indicators for Power, Link, and Data
• Flash Memory for firmware updating
• Operating Voltage: 12VDC Regulated
• Current Draw:Approximately 300mA
• Housing Size: 4.25" x 6.375" x 2.125"
• Board Size: 2.25" x 3.95"
• Includes ELK-P1216 Switching Power
Supply and Serial Cable
Virtual Keypad Screens
Main Serial Port for EZ8
The main serial interface for ELK-M1EZ8, required for interfacing M1EZ8 with a
PC for upload/download. Also required when adding the M1XEP Ethernet port.
Baud rate programmable up to 115,200 baud.
ELK-M1EZ8MSI
• Powerline lighting pass-through
connector for PSC05 (or
equivalent) interface
• Housing Size: 4.375" x 3" x 1.25"
• Board Size: 3.375" x 2.25"
M1 Data Bus Hub
For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or
CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly.
ELK-M1DBH
• Designed for multiple home run cables
• Internally connect Data A & B lines from
previous device into next device out
• Multiple Hubs may be connected for expansion
• EOL Bus Termination done on-board with
included RJ-45 Terminator Plug
• Input Connectors: Elevator Screw Terminals
• Output Connections: RJ-45, 8-Pin Jacks
• Mounting Plate Size: 6.5" x 3" x .5"
• Circuit Board Size: 5" x 2.5" x .75”
• Easily snaps into Elk enclosure
M1 Data Bus Hub for Retrofit
Active RS-485 data bus hub for retrofitting older panels with multiple homerun, 4 conductor keypad/
data wires with M1 Controls. The end of each cable is EOL terminated to insure proper operation
and supervision.
ELK-M1DBHR
12
• Splits main data bus into 4 managed
RS-485 branches.
• Each branch can have 2 parallel home run
cables for total of 8 home runs
•Works with standard 4 conductor home
run wiring
• Inputs: Elevator Screw Terminals (4 position)
• Output: Elevator Screw Terminals (4 position)
• Includes ELK-SWG for easy mounting
in ELK enclosure
• Circuit Board Size: 4.9" x 2.75" x .5”
M1 Wireless Receiver for GE Crystal Transmitters
Wireless (RF) Receiver and Input Expander for use with M1 Controls.
ELK-M1XRF2G
• Adds up to 144 individual wireless zones
(sensors/points)
•Compatible with GE Crystal Transmitters
• Operates from 4 wire data bus
• Multiple receivers (up to 11) may be connected
to a single M1 or M1EZ8 Control for redundancy
or greater coverage
• Flash Memory for firmware updating
• Sensitivity: >105 dbm
• Operating Temperature: 0 to +120 degrees F
• Operating Voltage: 12 Volts D.C.
• Current Draw: 70mA
• Indoor Range: 300 to 500 ft. line of sight (Up to
1000 ft. with ground plane antennas)
• Housing Dimensions: 6.5” x 4.5” x 1”
• Antenna Length: 9.25”
M1 Wireless Receiver for Ademco 5800 Series Transmitters
Wireless (RF) Receiver and Input Expander for use with M1 Controls.
ELK-M1XRF2H
•Adds up to 144 individual wireless zones
(sensors/points)
•Compatible with Ademco 5800 Series
one way transmitters
• Operates from the 4 wire M1 RS485 Data Bus
• Multiple receivers (up to 11) may be
connected to a single M1 or M1EZ8 Control for
redundancy or greater coverage
• Flash Memory for firmware updating
• Sensitivity: >105 dbm
• Operating Temperature: 0 to +120 degrees F
• Operating Voltage: 12 Volts D.C.
• Current Draw: 70mA
• Indoor Range: 300 to 500 ft. line of sight (Up to
1000 ft. with ground plane antennas)
• Housing Dimensions: 6.5” x 4.5” x 1”
•Antenna Length: 8.6”
M1 16 Zone Input Expander
Adds 16 hardwired zones (with or without EOL resistor supervised) to the M1 Controls. Up to 12 may be
added, increasing the M1Gold to 208 and the M1EZ8 to 200 total zones (inputs)
ELK-M1XIN
• Operates from 4-wire data bus.
• Dip Switch address settings
• Flash Memory for firmware updating
• Plug-in terminal strips
• Status and diagnostic LED
• Operating Power Range: 9 to 14VDC
• Current Draw: 65mA
• Size: 6" x 3.25" x .75"
• Includes ELK-SWG for easy mounting in
ELK enclosure
M1 16 Output Expander, 8 Voltage & 8 Relays
Adds 16 outputs (8 voltage, 8 relays) to M1 Controls. Voltages can be used to trigger low current
devices (50 mA max. each). Operates from 4-wire data bus. Up to 12 output expanders may be used
for a total of 205 outputs. Option: convert 8 voltage outputs to relays using M1RB Relay Board.
ELK-M1XOVR
• Operates on the 4 wire Data Bus
• Up to 12 Output Expanders may be added
• DIP Switch address settings
• Flash Memory for Firmware Updating
• Includes 12 conductor "Flying Lead"
Wire Harness
• Status LED with Diagnostic Display
• Relays: SPDT rated for 7A @ 28VDC,
10A @ 125 VAC.
• Voltage Outputs: 12VDC @ 50mA each
• Operating Power Range: 9 to 14VDC
• Current Draw 65mA Nom., 330 mA Max
• Size: 6" x 3.25" x .75"
• Includes ELK-SWG for easy mounting in
ELK enclosure
M1 Relay Board, Plug-in
Used to convert the M1 Controls voltage outputs into SPDT relays.
ELK-M1RB
• Provides 8 Relay Outputs
• Plugs directly into M1 Controls or
ELK-M1XOVR
• Includes ELK-SWG for easy mounting
in ELK enclosure
• Relay Contact Ratings: 7A @ 28VDC,
10A @ 125VAC
•Wire harness length: 24”
• Current draw: 0mA idle, 250mA max
• Size: 6” x 3.25” x. 75”
13
M1 Door Access Module
A single door access interface module for use with M1 Controls. It installs in place of an M1 Keypad and
operates from the RS-485 4-Wire Keypad Data Bus.
ELK-M1KAM
ELK-MA110
• Input for a standard 26 bit Wiegand Reader
• Input for a Dallas iButton Reader
• (3)12VDC Outputs for Door Held Open Alarm(50mA), Ready To Arm, and System Armed
indications (10mA)
• (2)Supervised Inputs for RTE (Request To Exit)
Button/Device and Door Status Sensor
• Four selectable Time settings for
"Request to Exit" and "Door Held Open"
iButton™ Reader Probe &
Plate Only
• Heavy Duty Form “C” Relay Contacts for
Switching Door Strike Power
• Connections: Plug-In Screw Terminals,
16 Position
• Operating Voltage: 13.8VDC
• Current Draw: Less than 30 mA with minimum
activity, 44 mA fully active
• Housing Dimensions: 4.25" x 6.375" x 2.125"
• Circuit Board Dimensions: 3.95" x 2.875" x .95"
• Hardware Watchdog Circuit
ELK-MA101
Applications include:
• High security access control
• Simple on/off switching
• Password authentication
iButton™ Touchkeys
Electronic key with unique 48-bit
serial number
• 10 pieces
• Required with ELK-MA110
Keypad Plug-in Proximity Reader
Plugs into the connector inside the ELK-M1KP keypad.* Allows a proximity
card or fob to be used to quickly arm, disarm, operate a door strike, etc.
• Reader format: 26 bit Wiegand
• Read Distance: ~3/8"
• 5 pin plug-in connector
ELK-M1PR
• Operating voltage: 5VDC from keypad
• Current Draw: ~20mA
*Will not fit other keypads- see ELK-106055
Requires M1PRC cards or M1PRF fobs
Exterior Proximity Reader
ELK-106055
Allows a proximity card or fob to be used with M1 Controls to quickly arm, disarm,
operate a door strike, etc.
• Connects to any M1KP Keypad
•Weatherproof - suitable for
with ELK-W035A - use ELK-W039A
outdoor installation
for M1KP2 & M1KP3 Keypads
• Size: 3 1/8” H x 1 7/8”Wx 1”D
• Can be used on any system that is
• Color: Black
• Operating Voltage: 12VDC
26 bit Wiegand compatible
• Current draw: 50mA
Requires M1PRC cards or M1PRF fobs
M1 Proximity
“Clam Shell” Cards
ELK-M1PRC
For use with the add-on proximity
readers: ELK-M1PR for the
ELK-M1KP keypad or ELK-106055
exterior reader.
• Comes in packs of (10) ten
• Credit Card Size
• Color: Off white
• Size: 3.375” x 2.125” x .0625”
M1 Proximity Key Fobs
For use with the add-on proximity
readers: ELK-M1PR for the
ELK-M1KP keypad or ELK-106055
exterior reader.
ELK-M1PRF
• Comes in packs of (10) ten
• Attaches to key chain
• Color: Black
• Size: 2.125” x 1.3125” x .25”
NESS Square D/Clipsal C-Bus Interface for M1 Controls
Designed and built by Ness Products, this interface is intended for connecting an
ELK-M1 control to a Clipsal C-Bus Lighting and Control Network.
ELK-101236
14
• Controls up to 255 individual C-Bus
lights or outputs.
• True 2 way communications on the
C-Bus network
• Operating Voltage: 12 Volts D.C.
• Current Draw: Max 60 mA
(Stand by 30 mA)
• Board Size: 4.33” x 4.53” x .9”
M1 Serial Port (RS-232) Expander, Thermostat/Lighting Interface
Additional serial port(s) for M1 Controls to interface other manufacturer’s
equipment utilizing RS-232 ASCII commands.
ELK-M1XSP
• Adapts HVAC Communicating
Thermostats to M1 Controls
• Allows M1 Controls to interface with
a variety of lighting products
• Adjustable baud rate 300 to 38,400
• Up to 7 M1XSP Expanders may be
added to M1 controls
• Operating Voltage: 12 Volts DC
• Current Draw: 31mA
• Housing Size: 4.375" x 3" x 1.125"
• Circuit Board Size: 3.5" x 2.75"
Some Partner Manufacturers; such as AMX, Control 4, and Crestron,
interface through the main serial port. Visit www.elkproducts.com for
more details and a complete list of partner manufacturers.
Z-Wave Lighting Interface
A Radio Transceiver interface designed to allow M1 Controls to interface with
Z-Wave enabled devices.
ELK-M1XZW
• Flash Memory Firmware Updating
• Connects to the M1 Data Bus
• Programmimg and Status LEDs
• Range: Up to 100 feet (Line of site) to
the closest Z-Wave enabled product
• Signal (Frequency) 908.42 MHz
• Housing Size: 4.25" x 6.375" x 2.125"
• Board Size: 2.25" x 3.95"
• Current Draw: 60mA
• Operating Voltage: 12 Volts DC
Ethernet to RS-232 Serial Bridge
The ELK-IP232 may be used to connect any standard serial communications device to an Ethernet
network. It is able to both initiate and accept network connections. Once a network connection is made,
the remote networked device is virtually connected to the serial device on the other side of the Bridge.
Both the network device and the serial device can send and receive messages to and from each other.
ELK-IP232
• Supports both UDP and TCP protocols
• Up to 12 simultaneous TCP-IP connections
• Up to twelve (12) "Rules" may be programmed
to make outgoing connections.
• Selectable baud rate from 300 to 115200 baud
• 802.3 compliant 10/100 Mbit interface
• Software and Hardware Handshaking
• Operating Voltage: 12 Volts D.C.
• Current Draw: Approx. 135 mA
• Dimensions: 3.85” L x 1.7”W x 0.93” D
• RS232, DB9M 9-pin serial port connection
• RJ45 8-pin Network Jack
• LED Indicators for Power, Link, and Data
• Includes: Serial Cable and 12V Supply
M1Gold Two Way Listen-in Kit
Complete kit for two way communication with M1Gold control
ELK-M1TWK
• Includes two-way interface,
ELK-M1TWI, plus a two way
speaker/microphone, ELK-M1TWS.
• Color: Interface-Black,
Speaker- White
• Speaker Size: 4.25" X 4.25" X 2.13"
• Interface Size: 4.5" x 3" x 1.2"
M1EZ8 Two Way Listen-In Kit
Complete kit for two way communication with M1EZ8 control
ELK-M1EZ8TWK
• Includes two-way interface,
ELKM1EZ8TWI, plus a two way
speaker/microphone, ELK-M1TWS
• Color: Interface-Black,
Speaker- White
• Speaker Size: 4.25" X 4.25" X 2.13"
• Interface Size: 4.5" x 3" x 1.2"
M1 Two Way Flush Mount Speaker/Microphone
Flush Mount 12 Watt Speaker and Microphone combination for use with the M1
Controls two way listen-in interfaces
ELK-M1TWSF
• Fits single gang electrical boxes
• Requires 4 conductor cable.
• Up to 12 may be connected.
• Color: White
• Size: 4.81" x 3.13" x 1.69"
M1 Two Way Speaker/Microphone
Microphone and 20 Watt Speaker combination for use with the M1 Controls
two way listen-in interfaces
ELK-M1TWS
• Requires 4 conductor cable.
• Up to 12 may be connected.
• Color: White
• Size: 4.25" x 4.25" x 2.13"
15
M1 Two Way Microphone
Microphone only for use with the M1 Controls two way listen-in interfaces.
• Operating Voltage: Powered from
M1TWI or M1EZ8TWI
• Current Draw: 5mA each
• Circuit Board Dimensions: 1.5" x 1"
• Simple two wire connection
• High Sensitivity
• Up to 12 may be connected
ELK-M1TWM
M1 Gold Two Way Listen-In Interface
This can be used by Central Station to verify an alarm, or by a user from the M1Gold telephone remote
control to check on elderly parents, children, etc.
ELK-M1TWI
• Adds up to three (3) zones of two way listen-in
to M1G Control.
• Up to 12 microphones may be connected
• May be removed from included housing and
mounted on optional glides in Elk structured
wiring enclosures
• Module powered by M1 Gold
• Compatible with: ELK-M1TWM, ELK-M1TWS,
ELK-M1TWSF
• Includes 8 conductor interface cable
• Housing: 6.5”W x 4.3”H x 2.0”D
• Board Size: 4.5”W x 3.0”H x 1.2”D
M1EZ8 Two Way Listen-in Interface
This can be used by Central Station to verify alarm from the M1EZ8. Some jurisdictions now require
verification before dispatch.
ELK-M1EZ8TWI
• Adds up to three (3) zones of two way listen-in
to EZ8 Control
• Up to 12 microphones may be connected
• May be removed from included housing and
mounted on optional glides in Elk structured
wiring enclosures
• Module powered by M1 EZ8
• Compatible with: ELK-M1TWM, ELK-M1TWS,
ELK-M1TWSF
• Includes 8 conductor interface cable
• Housing Size: 6.5"W x 4.3" H x 2" D
• Board size: 3.375" x 2.25" H x .8"D
Audio Amplifier Module with Two Way Listen-In Capability
Provides 3 zones of amplified speaker outputs with adjustable volume, along with 3 zones of
microphone inputs. The M1TWA can be used to add two way listen-in to M1 Controls or to just add
amplified speakers at keypads and other locations in a building.
ELK-M1TWA
• 3 Amplified Speaker Zones
• Adjustable Speaker Volume Control by Zone
• Selectable Mute by Zone
• 3 Microphone Input Zones (up to 4 mics
per zone)
• Selectable Mic Listen by Zone or Select ALL
• Interfaces to ELK-M1 or ELK-M1EZ8 Controls
• Compatible with: ELK-M1TWM, ELK-M1TWS,
ELK-M1TWSF
• Output Impedance Range: ~4 to 32 Ohms per
speaker output
• Amplifier Rating: 1/2Watt per Speaker Output
• Operating Voltage: 9 to 14 Volts D.C.
• Current Draw: 15mA nominal, 1000mA max
• Microphone Current Draw. 5mA each
• Housing Dimensions: 4.25" x 6.375" x 2.125"
• Circuit Board Dimensions: 2.25" x 3.95"
M1 Zone Temperature Sensors
Brings temperature information to M1 Controls for processing. Monitor high or low temperatures with
this add-on remote sensor. Applications: wine cellars, server rooms, commercial coolers/freezers,
second homes, agricultural uses, etc.
• Connects to any on-board zone on the
M1 controls.
• Temperature may be accessed from keypad,
touchscreen, telephone remote control, PC,
or rules.
• Interface may be placed up to 1000' from
M1 Control
• Temperature Range: -50 to +140F
• Operating Voltage: 12 Volts DC
• Current Draw: 10mA
• Housing Dimensions: 2.375" x 1.25" x 1"
ELK-M1ZTS
ELK-M1ZTSR
• Interface with Short Probe
• Suitable for Indoor/Outdoor use in a
covered environment
16
• Interface with Stainless Remote Probe
• Suitable for Indoor/Outdoor use
• Probe Length: 7’
M1 Accessory Wiring Harness
This 5-pin cable is required for connecting GE Wireless Receivers (GE model
NX548E) to the M1 Controls. It can also be used to connect ELK-106055
proximity reader or any manufacturer’s 26 bit Wiegand reader to an M1KP keypad.
ELK-W035A
• Color Coded
• Pre-stripped wire ends
• Keyed connector
• 18 Gauge Wire
•Wire length: 18"
M1KP2 & M1KP3 Proximity Reader Wiring Harness
This two pin cable is used to connect a 26 bit Wiegand reader (such as the
ELK-106055) to the ELK-M1KP2 or M1KP3 Keypad
ELK-W039A
• Color Coded
• Pre-stripped wire ends
• Keyed connector
• 22 Gauge Wire
• Wire Length: 12”
Serial Ribbon Cable
This serial ribbon cable is used to connect the M1 Controls main serial port to
the M1XEP.
• Compact design means cable will not
interfere with the enclosure door
• DB9F to DB9M
• Approx. 17" long
ELK-W040A
4-Pin Ribbon Cable
Used for connecting expanders and arming stations to the M1 Control for
testing purposes.
ELK-W018B
• Great for bench testing
• Not recommended for
permanent installation
• Approx. 18” long
• 4 pin keyed connector
Serial Cable to convert USB to RS-232
This special cable is required for the ELK-RP software to connect with the M1
Controls when the computer does not provide a conventional RS-232 9 pin port.
• Male USB to Male DB-9
• Speed: USB 2.0
• Cable Length: 6'
• Includes CD with Device Drivers
ELK-USB232
Utility Box for Power Supplies, etc
Multi-purpose box works well for power supplies and other peripherals.
• Can be used to house
"special projects"
• Hinged cover with camlock
• Color: White
• Size: 12" x 12" x 3.5"
• Included in some M1EZ8 Control kits
ELK-UB12
Automation Accessories
Doorbell & Telephone Ring Detector
Detects doorbell and/or telephone ring to trigger automation events.
ELK-930
• Snap apart board includes: (2) doorbell sensors
and (1) phone sensor
• Double Sided Foam Mounting Tape Included
• Packaged in Reusable Poly Storage Box
• Lifetime Limited Warranty
• Max Doorbell Input: 24 Volts AC Nominal
• Doorbell Detection Current: 900mA minimum
• Max Output: 40mA @ 12 Volts DC
• Size 3.4" x 2.75" x .625"
17
Water Shutoff Valve
The ELK-WSV is a Professional Grade, electrically operated, water shutoff valve for both residential and
commercial use. Used in conjunction with an automation controller, leak detection devices, or a simple
manual pushbutton, the WSV can easily and conveniently shut off the main water supply to the building.
Safe for drinking water.
ELK-WSV
• Rapid Action - Opening or Closing
• Provides Remote Shut off of Main Water Supply
• Stainless Steel Ball Valve is Safe for
Drinking Water
• Integrates to Security or Automation Controller
(e.g. M1 Gold or M1EZ8)
• Can be Integrated with a Simple "Easy" Button
• Can be Integrated with a Wireless Receiver
and Wireless Pushbutton
• Valve Direction/Water Flow Indication
• Simple 12VDC, Four (4) Conductor Hookup
• Overall Dimensions: 9" x 5.75" x 4"
Actuator:
• Operates from 12 Volts DC
• Min Req. Power Supply: 12VDC, 1 Amp
• Current Draw: ~500mA nominal, 1 Amp peak
• Actuating Speed: < 4 seconds
• Torque: 1.25 in. lbs.
• Connections: 18 gauge, 4 conductor cord
Valve:
• Full Port, 2-way Ball Valve
• Stainless Steel Grade 316
• 1" NPT threaded pipe connections
Heavy Duty Relay/Contactor
Designed for remotely controlling high current devices. The energizing coil of the 9200 is 110 VAC,
however its relay contacts are capable of switching 220 VAC at up to 60 Amps of current. The relay coil
is prewired with a three (3) prong plug-in cord. This plug is compatible with virtually any appliance style
automation module (purchased separately) including: UPB, Insteon,ZWave, Zigbee, X10, etc. A simple
remote command can be sent to activate the lower current automation module, which in turn then
activates the higher current contacts of the 9200 relay. This permits the safe and easy On/Off
switching of up to 60 Amps of electrical current.
ELK-9200
• Pre-Wired Terminal Lugs for easy Installation
• 110 VAC Plug Cord for Energizing Relay Coil
• Heavy Duty "Lockable" Metal Enclosure
• 60 Amp Long Life Double Pole Relay Contacts
• Relay Suitable for a 110 VAC or 220 VAC Load
• Ideal for Water Heaters, Motors, Gates,
Pumps, etc.
• Operating Coil Voltage: 110 VAC
• Coil Current Draw: < 35 mA
• Relay "Contactor" Current Capacity:
60 Amps AC maximum
• Metal Enclosure Size: 12" x 12" x 3.375"
• Color: White
* Not suitable for wet locations.
Structured Wiring
28” Structured Wiring Box
Multi-purpose cabinet for structured wiring, controls, & peripherals
• Versatile mounting for structured
wiring modules from multiple
manufacturer’s; such as, Leviton,
OnQ, OpenHouse, and others
• Flush Mount, Heavy Duty, locking
cover with camlock.
• 2" Electrical box knockout in bottom
• Color: Appliance White
• Knockout Sizes: 1/2", 3/4",
and 1 1/4"
• Size: 14.25" W x 28" H x 4.5" D
ELK-SWFD28
ELK-SWB28
• Replacement Door for ELK-SWB28
• Includes Camlock
• Door Size: 15.63” x 29.88” x .63”
14" Structured Wiring Box
Multi-purpose surface mount cabinet for structured wiring, controls, & peripherals
ELK-SWB14
18
• Versatile mounting for multiple
manufacturer’s structured wiring
modules; such as, Leviton, OnQ,
OpenHouse, and others
• Heavy Duty, Tab Hinged Door
with Camlock
• 2" electrical box knockout in bottom
• Color: Appliance White
• Knockout Sizes: 1/2", 3/4",
and 1 1/4"
• Size: 14.25" Square x 3.5"D
Flush Mount Door for ELK-SWB14
Turn the SWB14 into a flush mount enclosure! Can be adjusted for varying wall
finish thickness and this locking, removable, hinged door extends beyond the box
edges approx. 5/8”, easily concealing uneven cutouts of the wallboard edges.
ELK-SWFD14
• Ideal for hollow frame walls with
studs on 16” centers
• Size: 15.5”W x 15.8” H x .5” D
Circuit Board Glides
For mounting ELK-M1 expansion boards or other manufacturer’s boards into the
Elk structured wiring enclosures
• Vertical Mounting
• Includes mounting screws
• Color: Gray
• Size: 2 7/8” D
ELK-SWG
Nylon Standoffs for Circuit Boards
For attaching ELK-M1 expansion boards or other manufacturer’s boards onto the
ELK-SWP or ELK-SWP3 plates
• Color: White
• 1/4” spacing, fits .156” hole
• Package of 10 standoffs
ELK-SWNS1
Grommet Donuts
Pack of 2 grommet donuts for use in structured wire enclosures
ELK-SWD1
• For use in 1.75” wire holes
• Protects wires from nicks and
scrapes
• Outside Hole Diameter: 1.75”
• Inside Hole Diameter: 1.25”
• Color: Black
Battery Shelf
Mounts into the Elk structured wiring enclosures or onto the SWR rails
• Holds up to an 8Ah battery
• Bare aluminum finish
• Size: 6.25”W x 4.75” H x 3.25” D
ELK-SWS
4.75” Multi-purpose Plate
Convenient, multi-purpose plate adapts peripherals, expansion boards, devices,
etc. to fit Elk structured wiring enclosures
• Mounts into Elk structured wiring
enclosures or on SWR rails
• Size: 6.25”W x 4.75” H x .5” D
ELK-SWP
3” Multi-purpose Adapter Plate
Convenient, multi-purpose plate adapts peripherals, expansion boards, devices,
etc. to fit Elk structured wiring enclosures
• Mounts into Elk structured wiring
enclosures or on SWR rails
• Size: 6.5”W x 3” H x .5” D
ELK-SWP3
Mounting Rails
A package of 2 universal rails to mount adapter plates and modules; such
as, Telephone, CATV, or Network modules. Accommodates modules from
Leviton,OnQ,OpenHouse, and others.
ELK-SWR
• Can be mounted to plywood or
other manufacturer’s structured
wiring boxes.
• Size: 1.125"W x 12.5" H x .375" D
• Not required in Elk structured
wiring enclosures.
19
ElkGuard© Units & Accessories
ElkGuard® Self-Contained Wireless Security System with GSM Communicator
• Construction Sites
• Homes without Land Lines
• Apartments/Dorms
• Marinas/Boats
ELK-106058
• Mobile Structures
• Small Business
• Temporary Alarm System
• Unoccupied Real Estate
On-board Motion Sensor: Senses motion up to 45 ft.
Remotes Included:
2) ELK-106068 4 Button Remotes
Accessories:
Up to 23 wireless devices sensors or keychain remotes
Communications:
Built in GSM “cellular”
communicator
Display:
6 character LED display
Voice Announcements: Reports alarms and events
On-board Siren:
124dB
Standby Battery:
Rechargeable 12Volt 3.3Ah
External Output:
For optional strobes or
external siren
Dimensions:
20.5” H x 4.5”W x 3.3” D
Weight:
5.75 lbs. complete with battery
• Operates for up to 3 months without
AC power
• Mobile all-in-one design
• Wireless GSM communication*
• Easy setup in minutes
• Control your system remotely
• On-board blaring siren
Also Available:
ELK-106057
NON-GSM ElkGuard® Unit
• For Local Alarm Only
• No reporting capabilities,
cannot be upgraded
* GSM Monitoring & Reporting service plans available through Alarm.com. Please visit www.alarm.com for details.
RKP Radio Keypad
ELK-106066
• Transmits: Arm, Disarm, and Panic
• Valid LED and Low Battery LED
• On-board beeper for feedback
• Replaceable 9V Lithium Battery (5 year life expectancy)
• Dimensions: 5.31” H x 3.54”W x 1.06” D (with door closed)
4 Button Remote (Keyfob)
ELK-106068
• Transmits: Arm, Disarm, and Panic
• Rugged,Waterproof Housing
• Sealed 3V Lithium Battery (10 year life expectancy)
• Dimensions: 2.2” H x 1.25”W x .5” D
Universal Door & Window Switch
ELK-106065
• Transmits: Alarm,Tamper, and Low Battery
• Built-in Reed Switch
• Ext. Switch Input includes processor for vibration sensor (not included)
• Replaceable 9V Lithium Battery (5 year life expectancy)
• Dimensions: 3” H x 1.8”W x 1” D
Mini Door & Window Switch
ELK-106064
• Transmits: Alarm,Tamper, and Low Battery
• Built-in Reed Switch
• Replaceable 3V Lithium Battery (5 year life expectancy)
• Dimensions: 3.4” H x 1.3”W x .9” D
Motion Detector (PIR)
ELK-106062
20
• Transmits: Alarm,Tamper, and Low Battery
• Max Coverage: 48’ x 48’ @ 90 degrees
• Selectable Pulse Count
• Pet Immune Available - (ELK-106051)
• Replaceable 9V Lithium Battery (5 year life expectancy)
• Dimensions: 5” H x 2.7”W x 2.2” D
Slimline Motion Detector (PIR)
ELK-106063
• Transmits: Alarm,Tamper, and Low Battery
• Max Coverage: 38’ x 38’ @ 90 degrees
• Selectable Pulse Count
• Replaceable 9V Lithium Battery (5 year life expectancy)
• Dimensions: 3.9” H x 3.1”W x 1.9” D
Emergency Pendant with Necklace/Bracelet
ELK-106050
• Transmits: Panic
• Sealed 3V Lithium Battery (10 year life expectancy)
• Dimensions: 2.25” H x 1.6”W x .75” D
Emergency Button
ELK-106054
• Transmits: Panic
• Replaceable 3V Lithium Battery (5 year life expectancy)
• Dimensions: 2.4” H x 1.4”W x .9” D
Doorbell Button
ELK-106056
• Transmits: Doorbell (Chime)
• Replaceable 3V Lithium Battery (5 year life expectancy)
• Dimensions: 2.4” H x 1.5”W x .7” D
Surge Suppressors
Solid State Surge Suppressors for control systems or systems connected to phone
lines. All units feature a super fast response time of less than 1 nanosecond.
• Solid State clamping Line-to-Line & Line-to-Ground
• Self restores after surges within ratings
• RJ31/38X 8-Pin Modular Jack
• Color: Black
• Size: 4.4" x 3" x 1.1"
• Lifetime Limited Warranty
ELK-950
ELK-950
ELK-951
ELK-955
• Protects 1 Incoming Phone Line and AC
Input from Transformer
• Telephone Breakover: 300 Volts
• Max AC Input Voltage: 24 VAC
• AC Breakover: 50 Volts
• Peak Pulse Current: 100 Amps
• Convenient Test Points For Lineman's
Test Set
• Protects 1 Incoming Phone Line
• Telephone Breakover: 300 Volts
• Peak Pulse Current: 100 Amps
• Convenient Test Points for Lineman's
Test Set
• Protects 2 Incoming Phone Lines
• Telephone Breakover: 300 Volts
• Peak Pulse Current: 100 Amps
• Convenient Test Points For Lineman's
Test Set
Single Telephone Line & Low Voltage
Surge Suppressor
Single Telephone Line Only
Surge Suppressor
Dual Telephone Line Only
Surge Suppressor
In-Line Telephone Surge Protector
The ELK-952 provides exceptional protection against damage from lightning, voltage spikes, and surge
damage coming into a phone line. It installs between the RJ31X Phone Jack and the Security Control.
The ELK-952 features multi-stage protection and is 5 times faster than MOVs
ELK-952
• 5 Stage Surge Protection
• Very Economical
• Easy to Install
• Works with Any Security Control
• Response Time: < 1 Nanosecond
• Max. Signal Voltage: 250V (peak)
• Breakdown Voltage: 280V (nominal)
• Max ‘Peak’ Pulse Current: 100 Amps
21
Siren, Voice, & Recordable Drivers
High Performance Siren Driver
Great for residential or commercial alarm installations, the ELK-100 draws less current than many siren
drivers. It offers 2 volume levels simultaneously, allowing exterior sound to be louder than interior.
ELK-100
• Two Volume Levels
• 3 sound options: Steady, Yelp, and Slow Sweep
• MilliMiser™ Lowers Current Draw
• ComboTrigger™ for Controls with Single
Alarm Outputs
• Pre-Wired for easy installation
• Lifetime Limited Warranty
• Output: 120 db @ 1 meter, 13.8VDC OR
109 dB onMilliMiser™ setting
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Operating Voltage: 6 to 14 Volts DC
• Current Draw: 1.2 Amps @ 13.8VDC,
(700 mA on MilliMiser™setting)
• Size: 2.75" x 3.6" D
Voice Siren Driver with Temporal Code
To eliminate confusion, this unit combines pre-recorded voice messages with attention grabbing siren
sounds. MilliMiser™, ComboTrigger™,VolumeStep™, and bilingual voice messages allow you to meet
any customer’s needs.
ELK-110
• Bilingual Voice - English Or Spanish
• VolumeStep™ - Graduated Volume
• Temporal Coded Fire Signal
• MilliMiser™ - Lowers Current Draw
• ComboTrigger™ for Controls with Single
Alarm Outputs
• Pre-Wired For Easy Installation
• Lifetime Limited Warranty
• Output: 120 db @ 1 meter, 13.8VDC OR
109 dB on MilliMiser™ setting
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Two Input Channels, Burglar & Fire
• Operating Voltage: 10 to 14 Volts DC
• Current draw: 1.25 Amps @ 13.8VDC,
(800 mA on MilliMiser™ setting)
• Size: 2.75” x 4.0”
Recordable Voice and Siren Driver with Temporal Code
This unique driver can be utilized as 4 voice recordable channels or 2 siren channels and 2 voice
channels. Recording is easy using on-board microphone or .wav file download from a PC using ELK-129.
ELK-120
• Up to 4 messages, or 2 voice + 2 siren
• On-board microphone
• 24W Audio Amplifier with volume control
• One shot & repeat modes of playback
• Line level and speaker outputs
• Momentary/maintained “+” triggering
• Connector for PC sound card interface, Elk-129
• Lifetime Limited Warranty
• Sounds: Classic Yelp Siren,Temporal Coded
Horn, and Steady Industrial Horn
• Maximum record time: 8 minutes
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Output: 120 db @ 1 meter, 13.8VDC
• Operating Voltage: 11 to 14 Volts DC
• Current Draw: 200 mA Nom., 2 A Max.
• Size: 3” x 5” x 1.25”
Recordable Voice Annunciator
Applications are endless with this versatile unit. It allows up to 8 custom announcements which can
be related to security, access control, museum narratives, amusement sounds/messages, on-hold
messages for phone systems, equipment warnings, etc.
ELK-124
• Up to 8 messages
• On-board microphone
• 24W Audio Amplifier with volume control
• One shot & repeat modes of playback
• Line level and speaker outputs
• Momentary/maintained "+" or "-" triggering
• Connector for PC sound card interface, Elk-129
• Lifetime Limited Warranty
• Maximum record time: 8 minutes
• Speaker Load: 8 Ohm Nom., 4 Ohm Min.
• Output: 120 db @ 1 meter, 13.8VDC
• Operating Voltage: 11 to 14 Volts DC
• Current Draw: 200 mA Nom., 2 A Max.
• Enclosure Size: 4.375” x 6.5” x 2”
PC Sound Card Interface
This interface allows you to download Audio .Wav files from your computer to ELK’s recordable modules.
ELK-129
22
• Software requires MS Windows 95 or higher
• PC requirements: Stereo speaker output jack or
Sound Card and speakers
• Input Power Required for programming
ELK-120 or ELK-124: 12 VAC, 20VA Transformer
(not included)
• Program ELK’s recordable modules from PC
• Audio Jacks: Computer in and speaker out
• Includes: 6 Ft. audio cable, ribbon interface
cable, and CDROM with software
• Lifetime Limited Warranty
Echo™ Paintable Speakers/Sirens
The versatile Echo™ Series speakers and sirens are designed to be heard but not seen! Sound "echoes" off
mounting surface from back plate edge. The unique contemporary design has a smooth, paintable, “no grill”
surface that easily blends with any decor.
• May be painted or wallpapered to please the most discerning decorator
• Mounts to any flat surface or single gang electrical box
• Interior use only
• Color: White
• Mounting Hardware Included
• Lifetime Limited Warranty
ELK-70
ELK-71
• Interior Speaker
• Great for Voice and Sounds
• Impedance: 8 Ohms
• Rating: 20Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Size: 4.375" H x 6.375"W x 1.875" D
• Interior Alarm Siren with Yelp and Steady Tones
• Operating Voltage: 6 - 14 Volts DC
• Sound Level: 100 db @ 1 Meter, 13.8VDC
• Current Draw: 480mA @ 13.8VDC
• Size: 4.375” H x 6.375"W x 1.875” D
Echo™ Speaker
Echo™ Siren
ELK-73
ELK-74
• Small, Interior Speaker
• Great for Voice and Sounds
• Impedance: 8 Ohms
• Rating: 20 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Size: 4.56" H x 4.3"W x 1.875" D
• Small, Interior Alarm Siren with Yelp and
Steady Tones
• Operating Voltage: 6 - 14 Volts DC
• Sound Level: 100 db @ 1 meter, 13.8VDC
• Current draw: 480mA @ 13.8VDC
• Size: 4.56" H x 4.3"W x 1.875” D
Compact Echo™ Speaker
Compact Echo™ Siren
Interior Speakers/Sirens
Flush Mount Speaker
Flush mount speaker features compact, low profile design. Wall plate size
allows unit to be unnoticed at outlet height. 32 ohm impedance allows multiple
speakers to be wired in parallel while maintaining an overall load rating that is
acceptable for most control panels.
• Ideal for alarm or voice applications
• Fits single gang electrical boxes
• Lifetime Limited Warranty
• Impedance: 32 Ohms
• Rating: 12Watts
• Size: 4.81” x 3.13” x 1.44”
ELK-SP12F
ELK-SP35
20 Watt Interior Speaker
• Compact
• Easy To Mount
• Interior use only
• Color: White
• Hardware Included
• Lifetime Limited Warranty
• Multi-purpose Interior Speaker
• Great for voice or sounds
• Impedance: 8 Ohms
• Rating: 20 Watts Nominal
• Frequency Response: 250 to 8000 Hz
• Size: 4.25” H x 4.25”W x 2.13” D
ELK-SS36
Two Tone Interior Siren
• Self-Contained, Interior Alarm Siren
• Two Input Channels - Steady & Yelp
• Output: 105 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 - 14 Volts DC
• Current draw: 470mA @ 13.8VDC
• Size: 4.25” H x 4.25”W x 2.13” D
23
Stainless Steel Enclosed
Rugged quality, multi-purpose speakers and sirens with tamper resistant “no rust” enclosure are perfect for
all type jobs. With their compact design and stainless steel construction, these speakers and sirens naturally
reflect the mounting surface, blending easily into the surroundings. Great for harsh environments.
• Rust free, Guaranteed
• Compact, yet super loud
• Heavy duty magnet and mylar cone
• Matching strobe (ELK-SL1) in 4 colors
• Exterior or interior use
• Tamper resistant
• Size: 5”W x 5” H x 4” D
• 304 Stainless Steel with stainless hardware
• Lifetime Limited Warranty
ELK-1RT
ELK-150RT
• Clear Voice & Sound Reproduction
• High Fidelity voice coil
• Impedance: 8 Ohms
• Rating: 30Watts Nominal / 50Watts Peak
• Frequency Response: 500 to 7000 Hz
• Heavy duty magnet
•Works well with any control to produce
separate sounds (ComboTrigger™) for fire
and burglar from a single pulsing output
• Output: 118 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 to 14 Volts DC
• Current Draw: 1.2 Amps @ 13.8VDC
Speaker & Stainless Steel Enclosure
Siren & Stainless Steel Enclosure
Shown with SL1C Strobe
Strobes
Strobe for Stainless Speaker/Siren
A weather resistant, indoor/outdoor strobe light. Adds visual indication for alarms, warnings, hearing
impaired applications, etc. Attaches easily to ELK’s stainless steel units (ELK-1RT & ELK-150RT) or to
wall using ELK-WK1. Features simple 12VDC two wire hookup, low current draw, and compatibility with
most control panels.
• Interior or exterior use
• Durable Polycarbonate Construction
• Can work with pulsing alarm outputs
• Colors: Clear, Red, Blue, or Amber
• Fits ELK Stainless Speaker/Sirens
• Operating Voltage: 12 Volts DC
• May be wall mounted (see ELK-WK1)
• Current draw: 210mA
• Easy to Install, simple 2 Wire Hookup
• Flash Rate:Approx. 1 Flash per second
• Lifetime Limited Warranty
• Size: 4.875" x 3.875" x 1.125"
ELK-SL1A
Amber Strobe
ELK-SL1B
Blue Strobe
Wall mount kit for ELK-SL1 strobe light
ELK-WK1
24
ELK-SL1C
Clear Strobe
Aesthetically pleasing cover allows mounting of ELK-SL1 directly to wall surfaces.
• Attractive cover
• Color: White
• Indoor/Outdoor
• Mounting Hardware Included
• Durable ABS Plastic
• Size: 5.125" x 2.625" x 1.375"
• Easy to Install
• Lifetime Limited Warranty
ELK-SL1R
Red Strobe
Multi-purpose Speakers/Sirens
ELK-44
ELK-45
• Ideal for Alarm Systems or Paging
• Loud - Rivals Sound of Larger Speakers
• Heavy duty magnet and mylar cone
• High Fidelity Voice Coil
• Impedance: 8 Ohms
• Rating: 30 Watts Nominal / 50 Watts Peak
• Frequency Response: 500 to 7000 Hz
• ComboTrigger™ Produces two distinct
tones from single pulsing alarm outputs
• Output: 118 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 to 14 Volts DC
• Current Draw: 1.2 Amps @ 13.8VDC
30 Watt Speaker
• Rugged, Compact
• Easy To Mount
• Interior or Exterior use
• Color: Black
• Size: 4" H x 4"W x 3.5" D
• Lifetime Limited Warranty
Loud, Self Contained Siren
Compact, Single Tone Siren
Self-contained, exterior alarm siren. Small size makes it ideal for tight spaces.
ELK-M120
• Self-Contained,Yelping Siren Sound
• Low Current Draw
• Easy To Mount
• Interior or Exterior use
• Lifetime Limited Warranty
ELK-SP15
ELK-SS15
• Multi-purpose, horn speaker
• Impedance: 8 Ohms
• Rating: 15 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Self-contained, exterior alarm siren
• Two Tones - Yelp & Steady
• Output: 110 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 - 14 Volts DC
• Current Draw: 500mA @ 13.8VDC
15 Watt Speaker
• Easy To Mount
• Interior or Exterior use
• Color: White
• Size: 5.25" x 6"
• Lifetime Limited Warranty
Two Tone Siren
ELK-SP30
ELK-SS30
• Multi-purpose horn speaker
• Great for voice or sounds
• Ideal for Alarm Systems or Paging
• High Fidelity Voice Coil
• Impedance: 8 Ohms
• Rating: 30 Watts Nominal
• Frequency Response: 500 to 7000 Hz
• Self-contained, exterior alarm siren
• Two Tones,Yelp & Steady
• Output: 120 db @ 1 meter, 13.8VDC
• Operating Voltage: 6 - 14 Volts DC
• Current draw: 1.1A @ 13.8VDC
30 Watt Speaker
• Easy To Mount
• Interior or Exterior use
• Color: White
• Size: 6" x 8" x 9.5"
• Lifetime Limited Warranty
• Output: 107 db @ 1 meter, 13.8VDC
• Color: White
• Operating Voltage: 6 - 14 Volts DC
• Current draw: 388mA @ 13.8VDC
• Size: 3.25" x 4"
Two Tone Siren
40 Watt Speaker
Heavy duty, horn speaker for use when maximum volume and clarity are a must.
Great for voice or sounds!
ELK-SP40
• Ideal for Alarm Systems or Paging
• Tamper Loop
• Interior or exterior use
• High Fidelity Voice Coil
• Lifetime Limited Warranty
• Impedance: 8 Ohms
• Rating: 40 Watts Nominal
• Frequency Response: 250 to 8000 Hz
• Color: White
• Size: 11" x 6.5" x 8.5" deep
25
Power
RECHARGEABLE BATTERIES
Premium Quality, Sealed Lead Acid Batteries with 2-Year Warranty
• Rechargeable
• All virgin materials for long life
• More lead for greater Ah capacity
• Size comparable to other manufacturers lower Ah sizes
• UL recognized component
• 2 year Warranty
ELK-0613
ELK-0650
ELK-0675
ELK-06120
ELK-1208J2
ELK-1213
ELK-1233
ELK-1250
ELK-1280
ELK-12120
ELK-12180
ELK-12260
6 Volt, 1.3 Ah
• 3.82” L x .94”W x 2.01” H
• .187” F-1 Faston Tab
6 Volt, 5 Ah
• 2.76” L x 1.85”W x 3.94” H
• .187” F-1 Faston Tab
12 Volt, 0.8 Ah
• 3.78” L x .98”W x 2.51” H
• J2 Terminals
12 Volt, 1.3 Ah
• 3.82” L x 1.77”W x 2.24” H
• .187” F-1 Faston Tab
12 Volt, 8 Ah
• 5.94” L x 2.56” W x 3.98” H
• .187” F-1 Faston Tab
12 Volt, 12 Ah
• 5.94” L x 3.9”W x 3.94” H
• .187” F-1 Faston Tab
6 Volt, 7.5 Ah
• 5.90” L x 1.34”W 3.90” H
• .187” F-1 Faston Tab
12V, 3.3 Ah
• 5.27” L x 2.64”W x 2.6” H
• .187” F-1 Faston Tab
12 Volt, 18 Ah
• 7.12” L x 3”W x 6.57” H
• B1-M5 bolt & nut
6 Volt, 12 Ah
• 5.9” L x 1.97”W x 3.9” H
• .187” F-1 Faston Tab
12 Volt, 5 Ah
• 3.5” L x 2.75”W x 4.17” H
• .187” F-1 Faston Tab
12 Volt, 26 Ah
• 6.53” L x 6.89”W x 4.96” H
• B1-M5 bolt & nut
Battery LifeTester™
A compact, easy to use service tool for testing 12 Volt rechargeable batteries. The BLT measures
internal conductivity (Mhos), which is the best indicator of a battery’s health and life expectancy. The
BLT operates as follows: For each battery brand and size installed, start by measuring and recording
a baseline Mhos reading. Then, during any service call or inspection simply measure and record
the current (most recent) Mhos reading. Always compare the current Mhos reading with the original
reading. When the current Mhos reading has reached at or around 71% of the original baseline then it
is time to consider replacing the battery.
• Compact, low cost, and easy to use
• Size 4.4" W x 3" H x 1.15" D
• Coated clips to connect to battery
• 3 digit display
• Does not discharge or damage the battery
• Lifetime Limited Warranty
• Includes self-adhesive test data labels for
recording battery readings
Self-adhesive Test Data
• Includes hard shell, protective carrying case
Labels, 100 Pack
• Powered by the battery under test and
ELK-BLTLABELS
automatically warns when the battery voltage is
too low for testing.
6, 12, or 24VDC Power Supply Board
ELK-P624
26
Trouble-free, general-purpose power supply/charger ideal for alarm, access control, and CCTV
applications. Features auto-resetting “fuseless” overload protection which eliminates costly service
calls to replace blown fuses.
• Auto-Resetting "fuseless" overload protection
• Output Current:
• Selectable 6, 12, or 24VDC Output
• 1.2 Amps @ 6V
• Visual AC & DC Power Indicators
• 1 Amp @ 12V
• Built-in Surge Suppression
• .8 Amps @ 24V
• Battery Charging Circuit
• Input Transformer Requirements:
• 6V operation: 12 VAC Transformer
• Size: 3”W x 3” H x 1” D
• Lifetime Limited Warranty
• 12V operation: 16.5 VAC (TRG1640)
• 24V operation: 24 VAC (TRG2440)
CANNED POWER SUPPLIES
Multi-purpose power supplies with metal enclosure for security, CCTV,
access control, cellular backup, etc.
• Auto Resetting (PTC) Overload Protection
• Visual AC & DC Power Indicators
• AC & DC Surge Suppression
• Built-In Battery Charging Circuit
• Color: White
• Size: 12”W x 12” H x 3.5” D
• Lifetime Limited Warranty
ELK-P112K
ELK-P112
12VDC Power Supply & Battery Charger in Can
• Regulated Output Voltage: 13.8 Volts DC
• Continuous Current Rating: 1 Amp*
• Includes ELK-TRG1640 Transformer
• Battery Recharging Capacity: 1.2Ah to 10 Ah
ELK-P112K
12VDC Power Supply & Battery Charger in
can with battery
• ELK-P112 KIT (with 12V, 5Ah battery)
ELK-P124
24VDC Power Supply & Battery Charger in can
• Regulated Output Voltage: 24 Volts D.C.
• Continuous Current Rating: 800 Milliamps
• Includes ELK-TRG2440 Transformer
• Battery Recharging Capacity: 1.2Ah to 10 Ah
ELK-P124K
24VDC Power Supply & Battery Charger in
can with batteries
• ELK-P124 KIT (with two 12V, 5Ah batteries)
ELK-P412
4 Amp, 12VDC Power Supply & Battery Charger in Can
• Regulated Output Voltage: 13.8 Volts D.C.
• Continuous Current Rating: 4 Amps
• Three (3) PTC Protected Power Outputs
• Master Power On/Off Switch
• Visual Power Indicators
• Switching Power Supply, no transformer needed
• Built-In Battery Charging Circuit
• AC Input Voltage Range: 120 VAC @ 47-63Hz
• Built-in Low Battery Cutoff: ≈ 10 Volts
• Battery Recharging Capacity: 1.2Ah to 10 Ah
Cell Power Pack for Uplink 2500 Cellular Transceiver
The ELK-P983 is ideal for mounting and powering the Uplink 2500 Cellular Alarm Transceiver. It
consists of a 12” x 12” metal enclosure and a 12 Volt DC power supply/battery charger. It is capable of
supplying 1 Amp of continuous current and 2.5 Amps peak for brief high current demands of
the radio during transmission. The design of the enclosure allows quick and easy field mounting of the
transceiver and antenna.
ELK-P983
• Special knockout for antenna
• Heavy Duty Metal Enclosure with camlock
• Ample room in enclosure for up to two (2) 7 or
8Ah Rechargeable Batteries (not supplied)
• Enclosure Color: White
• Supplies 12 Volts D.C. Power for Transceiver
• Current: 2.5A Peak, 1A Continuous
• Requires a 16.5 VAC, 45 VA Transformer
(not supplied)
•Enclosure Dimensions: 12” x 12” x 3.5”
Plug-in Switching DC Power Supply
All purpose 12 Volt DC Plug-In Switching Power Supply ideal for alarm, access control, and CCTV
applications. It plugs into a 120 Volt AC outlet and supplies 1.5 Amps of regulated 12VDC.
ELK-P1216
• Computer Grade Switching Power Supply
• Regulated 12VDC Output
• Six foot cord
• 2.1mm x 5.5mm x 9mm Power Plug
(center positive)
• UL Listed
• Lifetime Limited Warranty
• DC Output Voltage: 12 Volts DC
• Current Rating: 1.5 Amps
• AC Input Voltage: 100 -120 @ 47~63Hz
• Color: Black
• Size: 3"H x 2"W x 1.75"D
27
AUTO-RESETTING TRANSFORMERS
Auto-resetting, lifetime warranted transformers with grounding prong and grounding
screw terminal. Step down transformer for low voltage systems, such as Access
Control, Security, & CCTV.
• Wire Strain Relief
• Auto-Resetting (PTC) Fused Secondary
• Green Power On LED
• Grounding Prong & Terminal
• Electrical outlet mounting tab
• UL Listed
• Color: White
• Size: 4.14” H x 2.74”W x 2.2” D
• Lifetime Limited Warranty
ELK-TRG1640
16.5 VAC, 45 VA Auto Resetting Transformer
• Input Voltage: 120 VAC, 60Hz, .43W
• Output Voltage: 16.5 Volts AC
• Output Power: 45 VA
ELK-TRG2440
24VAC, 40 VA Auto Resetting Transformer
• Input Voltage: 120 VAC, 60Hz, .43W
• Output Voltage: 24 Volts AC
• Output Power: 40 VA
POWER DISTRIBUTION UNITS
These convenient modules distribute power from a single AC or DC source to up to 9
outputs for centrally powering cameras, PIR's, photobeams, etc.
• Terminal blocks & 2.1mm DC power jack for power connection
• Auto-resetting PTCs help prevent a shorted output from disabling the other outputs
• Master Power On/Off Switch
• Visual LED Power Indicators on each Output
• Convenient Test Points for measuring Total Current Draw
• Outputs may be paralleled to increase max current draw from each output
• Requires a 6 to 30 volt AC or DC power source (not included)
• Color: White
• Size: 6.5” x 4.3” x 2”
• Lifetime Limited Warranty
ELK-PD9
ELK-PD9HC
ELK-PD9AC24
ELK-PD9DC12
• Max current draw: 250mA from each output
• Max combined current draw: Not to exceed
input Power Source or 2.3A
AC Camera Kit
• Conveniently powers up to (9) 24VAC cameras
• Max combined current draw: 1.7A
• Input/Output Voltage: 24 Volts AC
• Kit includes:
• (1) Power Distribution Module (ELK-PD9)
• (1) 24 Volt AC Transformer (ELK-TRG2440)
• Max current draw: 400mA from each output
• Max Combined Current Draw: Not to exceed
input power source or 3.6A
DC Camera Kit
• Conveniently powers up to (9) 12VDC cameras
• Maximum combined current draw: 1.5A
• Input/Output Voltage: 12 Volts DC
• Kit includes:
• (1) Power Distribution Module (ELK-PD9)
• (1) 12VDC Plug-in Power Supply (ELK-P1216)
Low Battery Cutoff & Master Power Switch
Total power control for any 12V control panel or power supply. Disconnects battery if voltage falls below
10VDC as a result of extended AC power outage. Convenient On/Off switch for manual disconnect.
ELK-965
28
• Automatic Low Battery Cutoff Protects Battery
From Deep Discharge
• Installer Friendly - Small Compact Size
• Includes AC Wires & Battery Leads
• Lifetime Limited Warranty
•Works with most 12 Volt DC Control Panels
or power supplies
• AC Power Leads: 18 AWG, 18" Length
• Maximum Transformer Size: 18 VAC
• Battery Leads: 18 AWG, 18" Length
• Low Battery Cutoff Voltage: ~10VDC
SAVE with 20
Piece Bulk Packs
Master Power Switch
Only, 20 Piece Bulk Pack
ELK-965-B20
ELK-964-B20
Relays & Timers
Compact Relay, 12 Volt
Quality, heavy duty relay module with SPDT (Form “C”) Dry Contacts. It is ideal for general purpose
switching of devices or high current loads.
ELK-912
• Positive Or Negative Activation
• Low Current Draw
• Elevator Style Screw Terminals
• Size: 1.1” X 1.55 “ each
• Includes Double Sided Foam Mounting Tape
• Packaged in Reusable Poly Storage Box
• Lifetime Limited Warranty
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Operating Voltage: 12 Volts DC
• Current draw: 30mA (relay on)
SAVE with “Snap
Apart” 12 packs
ELK-912-12
Relay, 12/24 Volt
ELK-912B
Quality, heavy duty relay module with SPDT Form “C” contacts. It is ideal for general purpose switching
of devices or high current loads.
• High Quality Large Cross Head Screw Terminals
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Positive Or Negative Activation
• Operating Voltage: 12 or 24 Volts DC
• Low Current Draw
• Current draw: 35mA, triggered (relay on)
• Voltage Input and Status LED
• Size: 2” X 1.5 “ each
SAVE with “Snap
• Includes Double Sided Foam Mounting Tape
Apart” 6 packs
• Packaged in Reusable Poly Storage Box
ELK-912B-6
• Lifetime Limited Warranty
Sensitive Relay, 12/24 Volt
Sensitive trigger, heavy duty relay module with DPDT (Form “C”) dry contacts.
ELK-924
• Trigger Current: 1.2mA @ 5-24VDC
• Positive (+) Or Negative (-) Trigger Input
• 12 or 24 VDC Selectable Operation
• Voltage Input LED
• Mounts in Standard 2.75" Snap Track
• Elevator Style Screw Terminals
• Size: 1.5” X 2.75” each
• Incl. Double Sided Foam Mounting Tape
• Packaged in Reusable Poly Storage Box
• Limited Lifetime Warranty
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Trigger Voltage: 5 - 24VDC, Pos or Neg
• Operating Voltage: 12 or 24 Volts DC
• Current draw: 60mA (both relays on)
SAVE with “Snap
Apart” 4 packs
ELK-924-4
Alarm Output Director
ELK-941
Allows single output control to activate 2 separate relays to provide steady voltage to 2 devices.
Intelligently determines whether the source is pulsing or steady. Can be triggered by a positive or
negative source. Possible uses include triggering long-range radio or cellular dialers, fire bells, strobes
and siren drivers.
• Ideal For Two (2) Channel Long Range Radio,
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Pulsing Input: .1 - 4sec. (.125-6hz)
Cellular Transmitters, or strobes
• Meets ANSI S3.41 Audible Emergency
• Trigger Voltage: 9 - 14VDC, Pos or Neg
Evacuation Signals 3-Pulse Pattern
• Trigger Current: 15mA
• Elevator Style Screw Terminals
• Operating Voltage: 12 Volts DC
• Limited Lifetime Warranty
• Current draw: 96mA (both relays on)
• Size: 4.4" x 3"x 1.15"
Delay Timer
Economical and flexible time delay relay for all purpose use. It features positive or negative trigger logic
with triggers as low as 4.5 V, making it compatible with 5 V logic outputs.
ELK-960
• Adjustable Time Delay
• Operating Modes: One-Shot or Repeat
• Low Current Input Trigger (<1mA)
• Configurable to be normally on or normally off
• Size: 3” x 2.2” x 1” (Fits Standard Snap Track)
• Lifetime Limited Warranty
• Relay Contacts: 7A @ 28VDC, or 10A @ 125 VAC
• Time Settings: 1-60 Seconds or 1-60 Minutes
• Trigger Voltage: 4.5 - 24VDC, Pos or Neg
• Operating Voltage: 12 to 24 Volts DC
• Current Draw: 40 mA DC with relay on
29
Programmable Controls
Magic Module™ Two Input Programmable Controller
ELK-MM220
Low cost, programmable controller can be a dual time delay relay, process controller, single zone
security control, etc. Programmed using the ELK-MB485 and ELK-MM443.
• 4096 program bytes using SIMPLE
• 2 Digital Inputs
programming language
• 2 Relay Outputs
• Shipped pre-programmed as a single zone
• 4 counters: 0 to 255 increments
alarm control
• 4 timers: 1/10 second to over 255 hours
• Non-volatile EEProm memory
• Operating Voltage: 12Volts DC
• Surface Mount Black Enclosure
• Current Draw: 10mA Nom., 70mA Max.
• Lifetime Limited Warranty
• Size: 4.5”W x 4.375” H x 2” D
Magic Module™ Four Input Programmable Controller
ELK-MM443
Powerful, networkable, programmable controller can be an automation controller, quad time delay relay,
door access control, security control, etc. Control lighting, security, access, or almost any electrical
device via powerline carrier (X10) or the 4 relays.
• Connection for powerline carrier (X10) interface
• 4 Inputs: Digital or Analog sensing
• 4 Relay Outputs
• 16,384 program bytes using SIMPLE
programming language
• 4 counters: 0 to 255 increments
• Network with other Magic Modules and
• 4 timers: 1/10 second to over 255 hours
accessories or PC over RS-485 Bus.
• RS-485 Data bus length: 4000 feet max.
• Non-volatile EEProm memory
• Operating Voltage: 9.5-15 Volts DC
• Surface Mount White Enclosure
• Current Draw: 10 mA. Nom., 130mA Max.
• Lifetime Limited Warranty
• Size: 6.5"W x 4.375"H x 2"D
RS-232 to RS-485 Data Converter
ELK-MB485
The ELK-MB485 is used to communicate between a personal computer and the ELK Magic Module
(ELK-MM443).The ELKMB485 converts the computer's RS-232 Serial Data to RS-485 Data which is
used by the ELK Magic Module™ series of products. This allows programs to be downloaded into the
Magic Modules. Input and Output status can be displayed and controlled from the computer.
• Converts RS-232 to RS-485 Data
• Data Interconnect Cable (4 Pin) included
• Visual Power Indicator LED
• Computer Serial Cable (9 Pin) included
• 9 Pin Serial D-Connector
• Enclosure Size: 4.5" x 3" x 1.2"
• Terminals for 4-Wire Data Bus
• Lifetime Limited Warranty
• Surface Mount ABS Enclosure with Snap-On Cover
Communication Accessories
10 Watt Audio Amplifier
ELK-800
30
This compact amplifier is ideal for telephone paging, PA, custom voice or alarm annunciation.
• No need for 25V or 70V Line Transformers
• Speaker Load: 8 Ohm Nom., 2 Ohm Min.
• Can drive multiple 8 Ohm speakers
• Color: Black
• Requires only 22-24 gauge telco wire
• Operating Voltage: 12 to 24 Volts AC or DC
• Built-in Volume Control
• Current draw: 50 mA Nom., 800 mA Max.
• Short circuit protection
• Size: 4.5” x 3” x 1.2”
• Output: 10 Watts
• Lifetime LimitedWarranty
• Input Impedance: 1000 Ohms Nominal
RJ31X Telco Jack & Cord
ELK-RJSET
For use with Alarm System Communicators, Line Fault devices, or other
equipment as a means of connecting to the incoming telephone line.
• USOC RJ31X 8 pin modular jack
• Built-in pass through shorting bars
• Gold plated connector pins
• Includes self adhesive foam mounting pad
• 2 foot, 8 conductor cord with modular plug on one end and spade
terminals on the other
• FCC approved - UL listed as a Communication Circuit Accessory
• Lifetime Limited Warranty
Universal Accessories
“B” Connectors
For solid, dependable splicing of 18 to 30
gauge wires.
• Easy to Squeeze Soft Brass Crimp
• Built-in Test Point
• Insulation Piercing Internal Teeth
• Durable Protective Outer Covering
• 2 Handy Zip Lock Bags of 250 pcs each
• 500 pcs per box
• Packaged in Reusable Poly Storage Box
• UL listed
ELK-900-2
ELK-902-2
Yellow Unfilled “B” Connectors
White Gel Filled “B” Connectors
•Yellow color indicates unfilled
•Non-hardening Gel Moisture Barrier
forms corrosion resistant splice
• White color indicates gel filled
• No Markings on Jacket
WARNING ALARM SYSTEM Decals for alarm installations
Alarm Decals
• Attractive Red, Blue and White
• UV-Resistant Vinyl Material
• Self Adhesive Peel And Stick Backing
• Fade-Resistant Ink
• Secondary Protective Clear Vinyl Laminate
• Size: 3.2” x 6.4” Triangle Shape
• ELK-998: Package of 100 Decals
• ELK-998-05: Retail Package of 5 Decals
ELK-998
100 Decals
ELK-998-05
5 Decals
Double Sided Foam Mounting Tape
ELK-999
• Permanent Rubber Adhesive
• 130 Individual Pieces
• Packaged in Reusable Poly Storage Box
• Individual Piece Size: 1/2" x 1- 1/2" x 1/4" Thick
Project Box
General purpose, paintable box for housing wire splices, relay modules, etc.
• Mounts to a single gang electrical box
• Mounting hardware included
• Removable wire entry tabs work with panduit surface raceway conduit
• Color: White
• Size: 6.5"W x 4.3" H x 2" D
ELK-PB1
31
Product Index by Part Number
32
ELK-0613
Battery; Lead Acid 6V-1.3Ah
26
ELK-101236
NESS Clipsal C-Bus Interface
ELK-0650
Battery; Lead Acid 6V-5.0Ah
26
ELK-106050
Emrgcy Pendant w/necklace & bracelet
21
ELK-0675
Battery; Lead Acid 6V-7.5Ah
26
ELK-106051
Motion Detector; Pet Immune
20
ELK-06120
Battery; Lead Acid 6V-12.0Ah
26
ELK-106054
Emergency Button
21
ELK-1RT
Speaker; 30W/50W, Stainless Housing
24
ELK-106055
UltraProx Wiegand Reader
14
ELK-44
Speaker; 30W/50W
25
ELK-106056
Doorbell Button
21
ELK-45
Siren; Self-Contained, Heavy Duty
25
ELK-106057
ElkGuard Wireless Control; NO GSM
20
ELK-70
Speaker; Interior 20 Watt (Echo™)
23
ELK-106058
ElkGuard Wireless Control w/GSM 20
ELK-71
Siren; Interior Self-Contained (Echo™)
23
ELK-106062
Motion Detector
20
ELK-73
Speaker; Compact Interior 20 Watt (Echo™)
23
ELK-106063
Slimline Motion Detector
21
ELK-74
Siren; Compact Interior (Echo™)
23
ELK-106064
Mini Door & Window Switch
20
ELK-100
Siren Driver; High Performance
22
ELK-106065
Universal Door & Window Switch
20
ELK-110
Voice Siren Driver
22
ELK-106066
RKP Radio Keypad
20
ELK-120
Recordable Voice/Siren Driver; 4 Channel
22
ELK-106068
4 Button Remote (Keyfob)
20
ELK-124
Recordable Voice Driver; 8 Channel
22
ELK-BLT
Battery LifeTester™
26
ELK-129
PC Sound Interface for Recordables
22
ELK-BLTLABELS
Test Data Labels for BLT
26
ELK-150RT
Siren; Heavy Duty, Stainless Housing
24
ELK-CFD256
RMS Skin w/Custom Logo on USB Flash Drive
10
ELK-800
Audio Amplifier, 10 Watt
30
ELK-IP232
Ethernet to RS-232 Serial Bridge
15
ELK-900-2
“B” Connectors, Plain
31
ELK-M120
Compact, Single Tone Siren
25
ELK-902-2
“B” Connectors, Gel Filled
31
ELK-M1DBH
M1 Data Bus Hub (Cat5/Cat6 wiring)
12
ELK-912
Relay; SPDT; 12V
29
ELK-M1DBHR
M1 Data Bus Hub (4 conductor wiring)
12
ELK-912-12
12 Pack Relays; SPDT; 12V
29
ELK-M1EZ8
EZ8 Control in 12” Can w/Lock and hdwr
6
ELK-912B
Relay; SPDT; 12/24V
29
ELK-M1EZ8CB
EZ8 Control Board Only
6
ELK-912B-6
6 Pack Relays; SPDT; 12/24V
29
ELK-M1EZ8K
EZ8 Kit; No Enclosure; M1KP Keypad
6
ELK-924
Sensitive Relay; DPDT; 12/24V
29
ELK-M1EZ8KB
EZ8 Kit; 12” Enclosure; M1KP Keypad
6
ELK-924-4
4 Pack Sensitive Relays; DPDT; 12/24V
29
ELK-M1EZ8KBS
EZ8 Kit; 12” Enclosure; M1KP2 Keypad
6
ELK-930
Doorbell/Telephone Ring Detector
17
ELK-M1EZ8KS
EZ8 Kit; No Enclosure; M1KP2 Keypad
6
ELK-941
Alarm Output Director
29
ELK-M1EZ8MSI
EZ8 Main Serial Interface
12
ELK-950
AC & Telephone Surge Suppressor
21
ELK-M1EZ8TWI
EZ8 Two Way Listen-In Interface
16
ELK-951
Telephone Surge Suppressor
21
ELK-M1EZ8TWK
EZ8 Two way Listen-In Kit
15
ELK-952
In-line Telephone Surge Suppressor
21
ELK-M1GCB
M1G Control Board Only
4
ELK-955
Dual Telephone Surge Suppressor
21
ELK-M1GK
M1G Kit; No Enclosure; M1KP Keypad
5
ELK-960
Delay Timer; 12/24V; 1 sec to 60 min
29
ELK-M1GKS
M1G Kit; No Enclosure; M1KP2 Keypad
5
ELK-964-B20
Master Power Switch (20 Pack)
28
ELK-M1GOLD
M1G Control in 14” Can w/Lock and hdwr
4
ELK-965
Low Battery Cutoff & Master Power Switch
28
ELK-M1GSYS3
M1G Kit; 14” Enclosure; No Keypad
4
ELK-965-B20
Low Batt Cutoff & Mst Power Switch (20 pk)
28
ELK-M1GSYS4
M1G Kit; 14” Enclosure; M1KP Keypad
5
ELK-998
Alarm Decals; Qty. 100
31
ELK-M1GSYS4S
M1G Kit; 14” Enclosure; M1KP2 Keypad
5
ELK-998-05
Alarm Decals; Qty. 5
31
ELK-M1KAM
Single Door Access Module
ELK-999
Double Sided Tape; Qty. 130 pcs
31
ELK-M1KP
LCD Keypad with Door; Green Display
8
ELK-9200
Heavy Duty Relay/Contactor; 60A
18
ELK-M1KP2
Low Profile LCD Keypad
9
ELK-1208J2
Battery; Lead Acid 12V-0.8Ah
26
ELK-M1KP3
Compact LCD Keypad with Door
9
ELK-1213
Battery; Lead Acid 12V-1.3Ah
26
ELK-M1KPAS
LED Arming Station
8
ELK-1233
Battery; Lead Acid 12V-3.3Ah
26
ELK-M1KPB
LCD Keypad with Door; Blue Display
8
ELK-1250
Battery; Lead Acid 12V-5.0Ah
26
ELK-M1PR
Keypad Plug-in Proximity Reader
14
ELK-1280
Battery; Lead Acid 12V-8.0Ah
26
ELK-M1PRC
Proximity Cards
14
ELK-12120
Battery; Lead Acid 12V-12.0Ah
26
ELK-M1PRF
Proximity Fobs
14
ELK-12180
Battery; Lead Acid 12V-18.0Ah
26
ELK-M1RB
M1 Relay Board
13
ELK-12260
Battery; Lead Acid 12V-26.0Ah
26
ELK-M1TWA
Two Way Listen-In Module; Amplified
16
14
14
Product Index by Part Number (cont.)
ELK-M1TWI
M1G Two Way Listen-In Interface
16
ELK-SL1A
Strobe Light; Amber
24
ELK-M1TWK
M1G Two Way Listen-In Kit
15
ELK-SL1B
Strobe Light; Blue
24
ELK-M1TWM
Two Way Listen-In Microphone
16
ELK-SL1C
Strobe Light; Clear
24
ELK-M1TWS
Two Way Listen-In Speaker/Mic; Surface
15
ELK-SL1R
Strobe Light; Red
24
ELK-M1TWSF
Two Way Listen-In Speaker/Mic; Flush
15
ELK-SP12F
12 Watt Speaker; Flush Mount; Interior
23
ELK-M1XEP
Ethernet Interface
12
ELK-SP15
15 Watt Speaker; Interior/Exterior
25
ELK-M1XIN
16 Zone Input Expander
13
ELK-SP30
30 Watt Speaker; Interior/Exterior
25
ELK-M1XOVR
16 Output Expander; 8 Voltage/8 Relay
13
ELK-SP35
20 Watt Speaker; Interior
23
ELK-M1XRF2G
Wireless Receiver for GE
13
ELK-SP40
40 Watt Speaker; Interior/Exterior
25
ELK-M1XRF2H
Wireless Receiver for Honeywell
13
ELK-SS15
Two Tone Siren; 15 Watt; Interior/Exterior
25
ELK-M1XSP
Serial Expander; Lighting & Tstat Interface
15
ELK-SS30
Two Tone Siren; 30 Watt; Interior/Exterior
25
ELK-M1XZW
Z-Wave Lighting Interface
15
ELK-SS36
Two Tone Siren; 20 Watt; Interior
23
ELK-M1ZTS
Zone Temperature Sensor
16
ELK-SWB14
14” Structured Wiring Box
18
ELK-M1ZTSR
Zone Temperature Sensor; 7’ Probe
16
ELK-SWB28
28” Structured Wiring Box
18
ELK-MA101
iButton™ Touchkeys; 10 pack
14
ELK-SWD1
Grommet Donut for SWB14/SWB28
19
ELK-MA110
iButton™ Reader Probe & Plate
14
ELK-SWFD14
Flush Mount Door for SWB14
19
ELK-MB485
RS-232 to RS-485 Data Converter
30
ELK-SWFD28
Replacement Door for SWB28
18
ELK-MM220
Programmable Controller; 2 In/2 Out
30
ELK-SWG
Circuit Board Glides
19
ELK-MM443
Programmable Controller; 4 In/4 Out
30
ELK-SWNS1
Nylon Standoffs for Circuit Boards
19
ELK-P112
Power Supply in Can; 12VDC; 1A
27
ELK-SWP
4.75” Adapter Plate
19
ELK-P112K
P112 w/ 12V, 5Ah Battery
27
ELK-SWP3
3” Adapter Plate
19
ELK-P124
Power Supply in Can; 24VDC; 0.8A
27
ELK-SWR
Universal Mounting Rails
19
ELK-P124K
P124 w/ Two 12V, 5Ah Batteries
27
ELK-SWS
Battery Shelf 19
ELK-P1216
Power Supply; 12VDC; 1.5A
27
ELK-TRG1640
AC Transformer; 16VAC 45 VA
28
ELK-P412
Power Supply in Can; 12VDC, 4 A
27
ELK-TRG2440
AC Transformer; 24VAC, 40 VA
28
ELK-P624
Power Supply Board; 6, 12, or 24 VDC
26
ELK-TS071
Touchscreen w/ Power Supply
7
ELK-P983
Cell Power Pack for Uplink Cell Transmitters
27
ELK-TS071P
Touchscreen w/ POE Components
ELK-PB1
Project Box; 4.375” x 6.5” x 2”
31
ELK-UB12
Utility Box; 12” x 12” x 3.5”
17
ELK-PD9
Power Distribution; 9 Outputs, 250mA ea.
28
ELK-USB232
Cable to Convert USB to RS-232
17
ELK-PD9AC24
AC Power Distribution Kit
28
ELK-W018B
4 Pin Ribbon Cable
17
ELK-PD9DC12
DC Power Distribution Kit
28
ELK-W035A
Accessory Wire Harness for M1G/EZ8
17
ELK-PD9HC
Power Distribution; 9 Devices, 400 mA ea.
28
ELK-W039A
Prox Reader Harness for M1KP2/M1KP3
17
ELK-RJSET
RJ31X Block & Cord
31
ELK-W040A
Serial Ribbon Cable
17
ELK-RM
Consumer Software for M1G/EZ8
10
ELK-WK1
Wall Mount Kit for SL1 Strobes
24
10
ELK-WSV
Water Shutoff Valve; 1”NPT, 12VDC
18
ELK-RMDESIGNER Graphic Designer Software for ELK-RM
7
Want Training?
Training is available to professional installers and
distributors. Training sessions are held at our corporate
office, at off site locations, and via webinars.
Training schedules available at www.elkproducts.com
For more information or to request training in your
area, contact Elk by phone at (800)797-9355 or by
email at [email protected]
33
Manufactures
Controls • Sirens • Speakers • Batteries
Power Supplies • Relays • Surge Suppressors
Timers • Accessories • Test Tools
Elk Products, Inc.
P.O. Box 100
Hildebran, NC 28637
Toll Free: 800-797-9355
Local: 828-397-4200
Fax: 828-397-4415
www.elkproducts.com
[email protected]
0910
© Copyright 2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement