MITSUBISHI
ADVANCED AND EVER ADVANCING
MITSUBISHI ELECTRIC
2000 No.129E
MITSUBISHI
NEW PRODUCT RELEASE
CC-Link
GENERAL-PURPOSE
PROGRAMMABLE LOGIC CONTROLLERS
Analog - Digital Converter Module type AJ65SBT-64AD
Digital - Analog Converter Module type AJ65SBT-62DA
New!
The CC-Link analog-digital converter module and digital-analog converter module,
with the performance and functions of the conventional product (AJ65BT-64AD,
AJ65BT-64DAV/DAI) incorporated in advanced means, is now available in an
inexpensive compact size.
CC-Link master/local module
(Master station)
(QJ61BT11,AJ61BT11,A1SJ61BT11,
AJ61QBT11,A1SJ61QBT11)
AJ65SBT-62DA
(Remote device station)
AJ65SBT-64AD
(Remote device station)
1 station occupied
RX/RY:32 points each
RWr/RWw:4 points each
1 station occupied
RX/RY:32 points each
RWr/RWw:4 points each
Terminal resister
Terminal resister
Object whose
voltage/current
will be detected
Object to which
voltage/current
will be output
[Features]
(1) High accuracy
The AJ65SBT-64AD carries out A/D conversion with a ±0.2% accuracy in respect to the maximum digital
output value at the working ambient temperature 25±5°C.
The AJ65SBT-62DA carries out D/A conversion with a ±0.2% accuracy in respect to the maximum analog
output value at the working ambient temperature 25±5°C.
(2) High resolution of 1/±4000
The resolution can be set to either 1/4000 or 1/±4000 (-10 to +10V range, when user range setting 1 is
selected) can be selected and set with the range changeover.
(3) Range selectable per channel
There are five ranges* for the voltage and three ranges for the current, which can be selected for each
channel. (The range refers to the types of offset and gain settings.)
(4) Smaller than conventional module
The installation area ratio is 60% smaller and the volume ratio is 38% smaller than the conventional
module (AJ65BT-64AD, AJ65BT-64DAV/DAI).
(5) Up to 42 modules connectable
Although the conventional module occupied two stations, this new module occupies only one station, and
up to 42 modules can be connected to one master station.
[AJ65SBT-64AD performance specifications]
Item
Analog input
AJ65SBT-64AD
Voltage
DC -10 to 0 to +10V (input resistance 1M )
Current
DC -20 to 0 to +20mA (input resistance 250 )
Digital output
16-bit signed binary (-4096 to +4095)
Accuracy
Analog input range
Digital output
Ambient
temperature
25±5°C
Ambient
temperature
0 to 55°C
Max.
Resolution
-10 to +10V
I/O characteristics, maximum
resolution, accuracy (accuracy
relative to maximum value of
digital output value)
User range setting 1
(-10 to +10V)
Voltage
-4000 to +4000
2.5mV
0 to 5V
1.25mV
1 to 5V
User range setting 2
(0 to 5V)
0 to 4000
±0.4%
(±16 digit*)
±0.2%
(±8 digit*)
1.0mV
0 to 20mA
Current
5µA
4 to 20mA
0 to 4000
4µA
User range setting 3
(0 to 20mA)
* : digit indicates digital value.
Factory setting is -10 to +10V.
Maximum conversion speed
Absolute maximum input
Analog input points
Number of occupied stations
Connected terminal block
Applicable wire size
Applicable crimping terminal
Module mounting screw
Supported DIN rail
External power supply
24VDC internal current
consumption (A)
Noise immunity
Dielectric withstand voltage
Isolation system
Weight (kg)
Outline dimensions (mm)
1ms/1 channel.
Voltage ±15 V, current ±30mA
4 channels/1module
1 station (RX/RY: each 32 points, RWr/RWw: each 4 points)
7-point, 2-piece terminal block (transmission, power supply)
Direct-coupled, 18-point terminal block (analog input section) (M3 screw)
0.3 to 0.75mm2
RAV1.25-3.5 (conforming to JIS C2805)
M4 screw × 0.7mm × 16mm or more (tightening torque range: 78 to 108N cm)
Can also be mounted to DIN rail
TH35-7.5Fe, TH35-7.5Al (conforming to JIS-C2B12)
DC24V (DC20.4V to DC26.4V)
Inrush current : 8.5A, within 2.3ms
0.090
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
Between power supply/communication system batch and analog input batch: 500VAC, 1 minute
Across communication system terminals and all analog input terminals: Photocoupler isolated
Across power supply system terminals and all analog input terminals: Photocoupler isolated
Across channels: Non-isolated
0.20
118 (W) × 50 (H) × 40 (D)
[AJ65SBT-62DA performance specifications]
Item
Digital input
Analog output
AJ65SBT-62DA
Voltage
16-bit signed binary (-4096 to +4095)
Current
16-bit signed binary (0 to 4095)
Voltage
-10 to +10VDC (external load resistance: 2k
Current
to 1M
0 to 20mADC (external load resistance: 0 to 600
)
)
Accuracy
Digital Input
Value
Analog Output Range
-10 to +10V
-4000 to +4000
I/O characteristics, maximum
resolution, accuracy (accuracy
relative to maximum value of
analog output value)
Voltage
User range setting 1
(-10 to +10V)
Ambient
temperature
0 to 55°C
Ambient
temperature
25±5°C
±0.4%
(±40mV)
±0.2%
(±20mV)
±0.4%
(±20mV)
±0.2%
(±10mV)
0 to 5V
0 to 4000
Max.
Resolution
2.5mV
1.25mV
1 to 5V
User range setting 2
(0 to 5V)
0 to 20mA
Current
0 to 4000
1.0mV
5µA
4 to 20mA
User range setting 3
(0 to 20mA)
±0.4%
(±80µA)
±0.2%
(±40µA)
4µA
Factory setting is -10 to +10V.
Maximum conversion speed
Output short-circuit protection
Absolute maximum output
Number of analog output points
Number of occupied stations
Connected terminal block
Applicable wire size
Applicable crimping terminal
Module mounting screw
Applicable DIN rail
24VDC internal current
consumption (A)
External power supply
Noise immunity
Dielectric withstand voltage
Isolation system
Weight (kg)
Outline dimensions (mm)
1ms/1 channel
Provided
Voltage: ±12V, Current: +21mA
2 channels/1 module
1 station (RX/RY: 32 points each, RWr/RWw: 4 points each)
7-point, 2-piece terminal block (transmission, power supply)
Direct-coupled, 18-point terminal block (analog output section) (M3 screw)
0.3 to 0.75mm2
RAV1.25-3.5 (conforming to JIS C2805)
M4 screw × 0.7mm × 16mm or more (tightening torque range: 78 to 108N cm)
Can also be mounted to DIN rail
TH35-7.5Fe, TH35-7.5Al (conforming to JIS-C2B12)
0.16
DC24V (DC20.4V to DC26.4V)
Inrush current : 8.2A, within 2.1ms
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
500VAC for 1 minute across all power supply and communication system terminals and all analog output
terminals
Across communication system terminals and all analog output terminals: Photocoupler isolated
Across power supply system terminals and all analog output terminals: Photocoupler isolated
Across channels: Non-isolated
0.20
118 (W) × 50 (H) × 40 (D)
[External Dimensions]
The following diagram is for the AJ65SBT-64AD. The dimensions are the same as the AJ65SBT-62DA.
118
109
2-4.5 5.1 installation hole
RUN L RUN L ERR. CH1 2
MITSUBISHI
4
OFFSET GAIN
AJ65SBT-64AD
24G
(FG)
SELECT
STATION NO.
B RATE
40 20 10 8 4 2 1 4 2 1
ON
SET
CH1
CH2
CH3
CH4
TEST V+
I+
V+
I+
COM SLD COM AG
(FG1)
TEST COM SLD COM V+
V+
I+
I+
4
DA DG +24V
DB SLD
3
40
50
PW
(4.5)
16.5
(4.5)
Unit:mm
[Manuals]
Manual name
Analog-Digital Converter Module
type AJ65SBT-64AD User’s Manual(Hardware)
Analog-Digital Converter Module
type AJ65SBT-64AD User’s Manual
Digital-Analog Converter Module
type AJ65SBT-62DA User’s Manual(Hardware)
Digital-Analog Converter Module
type AJ65SBT-62DA User’s Manual
Country/Region
U.S.A
Brazil
Germany
U.K
Italy
Spain
South Africa
Hong Kong
China
Taiwan
Korea
Singapore
Thailand
Indonesia
India
Australia
Manual shipment method
IB/SH No.
Type code
Enclosed with product
IB-0800138
13JT09
Sold separately
SH-080106
13JR18
Enclosed with product
IB-0800139
13JT10
Sold separately
SH-080107
13JR19
Sales office
Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway Vernon Hills, IL 60061
MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda.
Av. Rio Branco, 123-15 ,and S/1507, Rio de Janeiro, RJ CEP 20040-005, Brazil
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8 D-40880 Ratingen, GERMANY
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Herts., AL10 8XB,UK
Mitsubishi Electric Europe B.V. Italian Branch
Centro Dir. Colleoni, Pal. Perseo - Ingr.2
Via Paracelso 12, 20041 Agrate B., Milano, Italy
Mitsubishi Electric Europe B.V. Spanish Branch
Pol. Ind. "Can Magi"- C/.Joan Buscalla, 2-4-A.C.420
08190 Sant Cugat del Valles, Barcelona, Spain
MSA Manufacturing (Pty) Ltd.
P O Box 39733 Bramley 201 8 Johannesburg, South Africa
Ryoden International Ltd.
10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong
Ryoden International Shanghai Ltd.
3F Block5 Building Automation Instrumentation Plaza 103 Cao Bao Rd. Shanghai
200233 China
Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan R.O.C.
STC Techno Seoul Co., Ltd.
1F Dong Seo Game Channel Bldg., 660-11,Deungchon-dong Kangsec-ku,
Seoul, Korea
Mitsubishi Electric Asia Pte, Ltd.
307 ALEXANDRA ROAD #05-01/02,
MITSUBISHI ELECTRIC BUILDING SINGAPORE 159943
F. A. Tech Co.,Ltd.
1138/33-34 Rama 3 Road, Yannawa, Bangkok 10120, Thailand
P.T. Autoteknindo SUMBER MAKMUR
Kompleks Agung Sedayu Propertindo (Harco Mangga Dua)
Blok H No.4 JI Mangga Dua Raya Jakarta Pusat 10730-Indonesia.
Messung Systems Put,Ltd.
Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI,PUNE-411026
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia
Tel/Fax
Tel : 1-847-478-2100
Fax : 1-847-478-0328
Tel : 55-21-221-8343
Fax : 55-21-221-9388
Tel : 49-2102-486-0
Fax : 49-2102-486-717
Tel : 44-1707-276100
Fax : 44-1707-278695
Tel : 39-039-6053301
Fax : 39-039-6053206
Tel : 34-935-653135
Fax : 34-935-891579
Tel
Fax
Tel
Fax
Tel
Fax
: 27-11-444-8080
: 27-11-444-8304
: 852-2887-8870
: 852-2887-7984
: 86-21-6475-3228
: 86-21-6484-6996
Tel
Fax
Tel
Fax
: 886-2-2299-2499
: 886-2-2299-2509
: 82-2-3668-6567
: 82-2-3664-8335
Tel : 65-473-2480
Fax : 65-476-7439
Tel
Fax
Tel
Fax
: 66-2-295-2861
: 66-2-295-2865
: 62-21-336292
: 62-21-330378
Tel
Fax
Tel
Fax
: 91-20-7128927
: 91-20-7128108
: 61-2-9684-7777
: 61-2-9684-7245
HEAD OFFICE:MITSUBISHI DENKI BLDG MARUNOUCHI TOKYO 100-8310 TELEX:J24532 CABLE MELCO TOKYO
2000 (MEE)
Specifications subject to change without notice.
Printed in Japan on recycled paper.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement