Bissell 5200 Flip-It Vacuum User`s guide
Add to my manuals
12 Pages
The Bissell 5200 Flip-It is a versatile floor cleaner that can be used for both dry vacuuming and wet cleaning on hard floor surfaces. The Flip-It features a flippable design that allows for easy transitions between dry and wet modes. It has a built-in heater (on select models) that warms up the water and solution, enhancing cleaning performance.
advertisement
USER'S GUIDE
5200 Flip-_t&
7340 Flip-!t Select Series
ConsumerServices
ProductView
Operation
_0
Troubleshooting
Warranty ug603-6704 5200 306.indd
1 3/1/06 11:28:49 AM
for buyinga BISSELLFlip-It
We're glad you purchased a BISSELL Flip-It or Flip-It Select.
Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your Flip-It is well made, and we back it with a limited one-year warranty.
We also stand behind it with a knowledgeable, dedicated Consumer
Services department, so, should you ever have a problem, you'll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876.
Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your Flip-It.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2 www.bissell.com
ug603-6704 5200 306.Jndd
2
800.237.7691
3/1/06 11:28:52 AM
Thanks for buyinga BISSELLFlip-It (5200), or Flip-It Select (7340)
For information aoou_repairs or replacement parts, or questions about your warranty, call:
BISSELLConsumer Services
1-800-237-7691
Monday - Friday
Saturday
Or write:
8 a.m.
9 a.m.
10 p.m. EST
8 p.m. EST
POBox3606
GrandRapidsMI 49501
Or visitthe BISSELLwebsite - www,bissell,com
WhencontactingBISSELL,havemodelnumberof unit available.
Pleaserecordyour ModelNumber:
Pleaserecordyour PurchaseDate:
NOTE:Pleasekeep youroriginalsalesreceipt.It providesproofof dateof purchasein the event
of a warrantyclaim.See "About YourWarranty"onpage12 for details. www.bissell.com
ug603-6704 5200 306.indd
3
800.237.7691
ii
3/1/06 11:28:52 AM
IRTANTSAFETYINSTRUCTIONS
Whenusingan electricalappliance, basic precautions shouldbe observed,includingthe following:
• Do not use withoutfilter in olace.
• Close attention is necessarywnen used by or near children
/k WARNING: tile
of fire,electricshock,or injury:
• Useindoors only.
• Do not leave FLIP-IT® when it is plugged in.
• Do not service FLIP-IT
• Do not use with damaged cord or plug.
• Do not use FLIP-IT damaged,left outdoorsor droppedintowater, haveit repairedat anAuthorizedServiceCenter.
• Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run applianceover cord, or exposecord to heatedsurfaces.
• Do not carry the appliance while in use.
• Do not handle FLIP-IT® plug or appliance with wet hands.
• Do not putany objectinto applianceopenings,use with blockedopening,or restrictair flow.
• Do not expose hair,loose clothing, fingers or body parts to openingsor moving parts.
• Do not pick up hot or burning objects.
• Do notpickupflammableor combustiblematerials
Californiato cause birth defects or other reproductiveharm.
Wash hands after handling.
SAVETHESE
INSTRUCTIONS.
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Grounded
Outlets presenceofexplosiveliquidsor vapor.
• Do notuseapplianceinan enclosedspacefilledwith vaporsgivenoffbyoil basepaint,paintthinner,some explosiveor toxicvapors.
• Do not pick uptoxic material(chlorinebleach, ammonia,drain cleaner,gasoline,etc.).
• Do not allow to be used as a toy.
• Do not use for any purpose other than described in this User's Guide.
• Connect to a properly grounded outlet only
See GroundingInstructions.
• Unplugfrom outlet when not in useand beforeconductingmaintenanceor troubleshooting.
• Do not unplug by pulling on cord.
• Useonlymanufacturer's attachments.
• Useonly cleaningproductsformulatedbyBISSELLfor use in this applianceto preventinternalcomponent damage.SeeCleaningFluidSectionof the manual.
• Keep openingsfree of dust, lint, hair, etc.
• Keepapplianceon a levelsurface.
• Turnoff all controlsbeforeunplugging.
• Unplugbygraspingthe plug, notthe cord.
Beextracarefulwhencleaningstairs.
www,bissell,com connectionof the equipment-grounding conductorcan resultin a risk of
electricalshock.Check with a qualified
electricianor serviceperson if you aren't
sure if the outletis properly grounded.
DONOTMODIFYTHEPLUG.If it will not fit
the outlet,havea proper outletinstalled
by a qualified electrician.Thisappliance
is designedfor useon a nominal120-volt circuit,and hasa groundingattachment plug that lookslike the plug in the drawingabove.Makecertainthatthe
applianceis connectedto an outlet havingthesame configurationas the
plug.No plugadaptershouldbe usedwith this appliance.
Thismodelisfor householduseonly.
800.237.7691
ug603-6704 5200 306.indd
4 3/1/06 11:28:52 AM
Spray
Tric
Handle
Cord
Clip
Q
CordWrap
Power
Switch
Tank
Built-in
Heater
(On Select Models
Heater
Indicator
Light
(OnSelect
Models)
Filter
Tank
WetVacuum
SuctionPath
GentleClean
TM
Brush& Pad
Wet Clean
TM
Nozzle
NOTE:Model 7340 shown with Heater
DryVacuum
SuctionPath
Z CAUTION:oo
solutionbydepressingthe triggeronthe forwardstrokeonly and releasethe triggeron the rearwardstroke.Overwetting
the floorsurfacemay causedelaminationof certainlaminated flooringmaterials.
Accessories:
Keepplentyof genuine
Formulason hand soyou can cleanwheneverit fits yourschedule.Always
usegenuineBISSELLdeep
cleaningformulas.Non-
BISSELLcleaningsolutions may harmthe machineand voidthe warranty.
Brush Card www.bissell,com
PadCard
GentleClean
Pads(2 pack) ug603-6704 5200 306.indd
5
Replacement 32 oz, 32 oz,
Pack(Gentle HardFloor WoodFloor
Pads& 1 Solutions
PleatedFilteO
800.237.7691
iii/
TM
3/1/06 11:28:53 AM
Features of Your BISSELL Flip-It
Includedwith the purchaseof yourFlip It arethe followingSpecializedCleaningAccessories...
The Rip-Itwas designedto givethe userthe abilityto easilychangebetweenthe Gentle
Brushesand Pads.
,
The GentleClean
TM
Brush is recommendedfor use on Hard Floor surfacessuch as tile, vinyl, or surfacesthat have grout or crevices where dirt
WARNING:
Do Not plug in your cleaner until you have
completely assembledit per
the following instructions
and are familiar with all instructionsand operating procedures.
and grime collect.
.
The GentleClean
TM
Padis intendedfor use on more delicate surfacessuch as sealed hardwood,laminates or vinyl.
3.
The PleatedFilter,located in the lid of the Dirty
Tankshould be cleanedperiodically.
WARNING:
Toreducethe dskoffire, useonlyBISSELLHard andWoodFloorCleaning
Solutionsin yourFlip-It.Use
ofcleaningformulaswhich
containlemonor pineoilmay damagethisapplianceand voidthewarranty.Chemical
spotcleanersor solvent
basedsoil removersshould
notbe used.Theseproducts may reactwith the plastic materials usedin yourFlip-It
causingcrackingor pitting.
Dry Vacuumand
Cleaning
Built-In Heater
(On 7340 Flip-It Select Models only).
To use the Flip-it select's Built-In Heater,push the power switch down.The HeatIndicator Light will come on. Within25-30 seconds,the flow of water and solution will be 25°F warmer.
-Wet Cleaningusing
Built-In Heater
It Together
Assembling your new BISSELLFlip-It is a simple
2 Step Process:
NOTE:Remove clean tank from unit first.
1.
2.
Insertthe Handle into the top of the unit, making sure the Spray Trigger is on the WetVacuumside.
Make sure the screw opening in the handle is alignedwith the hole in the housingof the unit.
Insertscrew; gently screw in until tight with the body of the unit.
6
www.bissell.com
800.237.7691
ug603-6704 5200 306.indd
6 3/1/06 11:29:00 AM
How
To UseYourFlip-It HardFloorCleaner
1.
Removethe CleanTank from the machine ,,,"""_t_'_
2.
Unscrew the black cap on the bottom of the :-'_ solution tank and remove the insert.
,
Fillingthe CleanTank:
Fill with BISSELLFormulato the formula fill line and fill with water to the WaterLine. Replacethe
Cap & InsertAssembly. Placethe full tank back into the unit.
Insertin The GentleClean
TM
Brushor Pad
Thefirst time youuseyourunit,the Gentle
Clean
TM
Padwill bein the unit.Basedon
yourflooringtypeand personal preference,you may want to change to the GentleClean
TM
Brush.Tochange
pad or brush,pullout sideways.
FloorCleaningSolutions on handsoyou can cleanwhen it fits yourschedule.Alwaysuse
Z WARNING:
ToReducethe Risk of Fireand
ElectricShockdue to internal componentdamage,useonly
BISSELLcleaningfluids intended for usewiththehardfloordeaner. www.bissell,com ug603-6704 5200 306.indd
7
32 oz.
800.237.7691
3/1/06 11:29:01 AM
Withthe DrySideof the unitfacingforward,turn the uniton and begincleaning.
Youwill seedry dirt,crumbsand debrisbeing collectedin the DirtyTank. Youdo nothaveto emptythe drydebrisbeforewet cleaning.
Fli in FromDr to Wet Cleanin
Tochangefromdryvacuumingto wet cleaning simplyflip the unitaround!
The GentleClean
TM
Brushor Padand Squeegee will automaticallybeloweredto effectivelyclean and Dryall yourHardFloorSurfaces.
Wet Cleanin /Vacuumin
TobeginWet Cleaning,simplypull the Spray
Brushor Pad.
8
OnFlip-itSelectModelsfor heated cleaningpressthe switchdownto turn onthe Built-InHeater.
Wet Cleaning
Off
Dry Vacuum and
Built-In Heater
Tomaximizethe areato becleaned,it is recommendedthatthe SprayTriggerissqueezed
onthe forward strokeand releasedon the reversestroke.
Thiswill dispensewater and formulagoing forwardand on the pull back,the squeegee will leave the floor essentiallydry and ready to walk on.
www,bissell,com
CAUTION:
Donot overwet the floor.Apply solutionbydepressingthe triggeron the forwardstroke onlyand releasethe trigger on the rearwardstroke.Over
wettingthe floorsurfacemay causedelaminationof certain laminatedflooringmaterials.
800,237.7691
ug603-6704 5200 306.Jndd
8 3/1/06 11:29:03 AM
_rty Tank Is Full
WhileWetCleaning,youwill seedirtywater
collectedin the DirtyTank.Whenthe Tankis full, thewhite Floatin the DirtyTankwill riseto the top,makinga noticeablesoundto letyou know it istime to emptythe DirtyTank.Suctionwill
stopwhentank isfull of water.
You're Finished
Em t in The Dirt Tank
Removethe DirtyTankLid.Thendumpthe dirty waterand debrisintothe sink,toilet,laundrytub
or outside.Rinsethe tank outwithwarm water and replaceit in the unit.
Checkin The Filter
Whilethe DirtyTankis outofthe unit,removethe
PleatedFilterfromthe topof the tank. Remove
dirt and debrisfromthe pleatsbygentlytapping the filteroverthe wastebasketor outside.
ThePleatedFiltercanalsoberinsedunderwater toclean.
NOTE:If the PleatedFilteris rinsedwith I
I
J
_ lo_reARN!k_KG_
placingit back in the unit.
Cleanin The GentleClean
TM
Brushor Pad'
J fire,electricshockor
I
injuryunplugfromoutlet beforeservicin_l.
I I
GentleCleanTMBrush
Removethe Brushfromthe unit and rinseunder warm water.
GentleCleanTMpad
Removethe GentleClean
TM
PadPlatefrom the unit.Peelthe padfromthe PadPlateand tossin the wash!
Removin Wet Clean Nozzle
RemovetheWet CleanNozzlebypullingtab on rightand left sideof nozzle.Rinseany dirtand grimeoft the nozzleunderwarm tap water.
To replacethe Wet CleanNozzle, insertthe 4
tabs alongthe bottomof the NozzleWindow
and gentlysnap the Wet CleaningNozzle back into place.
www.bissell.com
ug603-6704 5200 306.indd
9
800.237.7691
9
3/1/06 11:29:04 AM
iring The Flip-It
ingwater and formulain the unit.Be sureto removewet GentleClean
TM
Pad beforestoring.
iubleshooting
/k
Water& Formulaare drainingout fromthe cleantank.
PossibleCauses Remedies injuryunplugfromoutletI
I beforeservicin_l.
I
1. CleanTankBlackCap&Valvearenot on tight 1. RemoveBlackCap&Value andattachtightly
2. RemoveBlackCap& Valve and makesureit is screwedon straightandtightly
No suction
PossibleCauses
1. Filtermaybe dirty or clogged
2. Wet vacuumnozzlemay not be on properly
3. Tankis full
4. Filteris wet
5. Somethingis caughtandcloggingthe air path
Remedies
1.
Removefilter from the Dirty
Tankandclean
2. MakesureWetVacuumNozzleis on tight andsnappedinto place
3. EmptyTank
4. Makesurefilter is completelydry beforeplacingbackinto the unit.
5. Unplugunit,RemoveWetClean
Nozzleand inserta bluntobject intothe air pathto removeany potentialclog.
Water is not flowing
Remedies
1. RemoveTankandreinsertinto the unit
1. CleanTankis not insertedproperly
10 www.bissell.com
800.237.7691
ug603-6704 5200 306.indd
10 3/1/06 11:29:04 AM
_placement parts - BISSELL Flip-It 5200 & Flip-It Select 7340
Item
1
Part No.
203-6705
Part Name
Filter
6
7
8
9
10
4
5
2
3
15
16
17
18
11
12
13
14
19
20
203-6706
203-6858
203-6707
203-6859
203-6708
203-6860
203-6725
203-6856
203-6711
203-6854
203-6800
203-6714
203-6855
203-6700
203-6701
203-6702
3270
0482
0484
DirtyTankLidAssembly-AcierBlue
DirtyTankLidAssembly-VulcanicSatin
DirtyTank -Acier Blue
DirtyTank -VulcanicSatin
WetVacuumNozzle-Acier Blue
WetVacuumNozzle-VulcanicSatin
CleanTankwi1_Cap-AcierBlue
CleanTankwi1_Cap-VulcanicSatin
Handlewith Screw -Acier
Handlewith Screw -VulcanicSatin
CapandInsertAssembly
CordWrap- Acier
GentleClean
TM
BrushCard
GentleClean
TM
PadCard
GentleClean
TM
Pad(2 pack)
WoodFloorSolutions
HardFloorSolutions
Pads& 1PleatedRlter)
*Not all parts are included with every model.
www.bissell,com ug603-6704 5200 306.indd
11
800.237.7691
11
3/1/06 11:29:05 AM
- BISSELL Flip-It
This warranty gives you specific legal rights, and you may also have otner rtcqts wntcn may vary from state to state. If you need additional instruction regarding this warranty or nave auesttons regardingwhat tt may cover, pleasecontact BISSELLConsumer Servicesby E-mail,telephone, or regular mattas described below.
LimitedOne YearWarranty
Subject to the *EXCEPTIONSAND EXCLUSIONSidentified below, upon receipt of the 3roduct BISSELL
Homecare, Inc. will repair or replace (with new or remanufacturedcomponents or products), at BISSELL's option, free of charge from the date of purchase by the original purchaser,for one year any defective or malfunctioning part.
See information below on "If your BISSELLproduct should require service".
Thiswarrantyappliesto productusedfor personal,and notcommercialor rentalservice.Thiswarrantydoesnotapplyto
fansor routinemaintenancecomponentssuchasfilters,belts,or brushes.Damageor malfunctioncausedbynegligence,
NOTE:Please keep your original sales receipt. It provides proof of date of purchase in the event
of a warranty claim. See "About Your Warranty" on page 12 for details.
If yourBISSELLproductshouldrequireservice:
Contact BISSELLConsumer Services to locate a BISSELLAuthorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELLConsumer Services.
Website or E-mail: www.bissell.com
Usethe "Customer Services" tab.
Or Call:
BISSELLConsumer Services
1-800-237-7691
Monday - Friday8 a.rn. - 10 p.m. ET
Saturday 9 a.rn. - 8 p.m. ET
Or write:
BISSELLHornecare Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN:Consumer Services
Some states do not allow the exclusionor limitation of incidentalor consequentialdamages, so the above limitation or exclusionmay not apply to you.
Somestatesdo not allow limitationson how long an impliedwarrantylasts, 6othe abovelimitationmay notapplyto you.
12
www.bissell.com
@2006 BISSELLHomecare, Inc
Grand Rapids,Michigan
AII rights reserved.Printedin China
Part Number 603-6764
Rev 02/06
Visit our website at: www.bissell.com
800.237.7691
ug603-6704 5200 306.indd
12 3/1/06 11:29:06 AM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement