usi PROMOUNT PLUS 2700 Specifications

usi PROMOUNT PLUS 2700 Specifications
Order Line 800-883-0294
Wahl Bros.
Suspensions
Wear Resistant
Grass/Ice Drag
Suspension
Rubber
Track
Suspension
One of our newest suspensions
is an awesome showpiece that
is designed for the grass. It features aluminum wear resistant
3 1/4” idlers and 8” rear idlers. This makes it our lightest
wheeled suspension. The torsion type adjustable front arm
springs allow fluid movement along with dual limiter bolts to
adjust direction of the machine. Rear suspension travel is 3”.
Slides can be added for winter use. Unit comes standard with
an oil shock, but a Fox gas or air shock can be added at an
exchange price. Please supply us with driver weight and type
of chassis. Also available with lightweight rubber wheels.
Wear Resistant
These original lightweight suspensions fit any stock or race
116”, 121”, 128”, 136” or 144” rubber track. They are also
available for the narrow Arctic Firecat Chassis. Using the
same technology as our cleated track suspensions, you have
adjustments to control ski pressure and weight transfer as
desired. The dual torsion type adjustable front arm spring
allows for smooth front arm movement, making it the quickest
suspension available for rubber tracks. Rail centers are 9”.
These suspensions are used on ice and snow applications.
The slides can be removed and wheels can be added to offer
separate purposes like grass or asphalt racing. The suspension comes complete with three plastic rear idlers, cross
shafts, mounting brackets, standard slides and a front wheel
kit. Any option desired can be installed before shipping.
Some are listed with the exchange price. Please supply us
with rider weight and type of machine.
Suspensions
02-165A…..Rubber Track
02-160A…..Rubber Track
02-820A…..Rubber Track
02-821A…..Rubber Track
02-161A…..Rubber Track
02-809A…..Rubber Track
Suspension,
Suspension,
Suspension,
Suspension,
Suspension,
Suspension,
02-803A.....Grass
02-804A.....Grass
02-805A.....Grass
02-806A.....Grass
02-808A.....Grass
Drag
Drag
Drag
Drag
Drag
Suspension,
Suspension,
Suspension,
Suspension,
Suspension,
Wear
Wear
Wear
Wear
Wear
Resistant,
Resistant,
Resistant,
Resistant,
Resistant,
Drag
Drag
Drag
Drag
Suspension,
Suspension,
Suspension,
Suspension,
Lightweight
Lightweight
Lightweight
Lightweight
121” ..............$1795.00
128” ..............$1925.00
128” FIRECAT .$1925.00
136” ..............$2050.00
144” ..............$2095.00
Rubber
02-794A.....Grass
02-795A.....Grass
02-796A.....Grass
02-797A.....Grass
Rubber,
Rubber,
Rubber,
Rubber,
121”........$1275.00
128”........$1295.00
136”........$1325.00
144”........$1350.00
Options
Fox ZERO PRO Shock Kit (exchange)
02-164E...Includes shock, spring, keeper and spring adjuster............$185.00
Fox Float Shock Kit (exchange)
02-195E...MXR Fox Float assembly, Exchange ..................................$185.00
4th Rear Idler Kit, Wear Resistant Aluminum (exchange)
02-219E…Includes one 8” Wear Resistant Idler Wheel and three spacers,
(Wear Resistant Suspension) ..............................................$132.95
4th Rear Rubber Idler Kit (exchange)
02-166E....Includes one 8” Rubber idler wheel and three spacers,
(Lightweight Rubber Suspension) ........................................$35.00
Longer Front Arm upgrade, (exchange)
02-189E…Long Front Arm - Rubber Track, (4” Longer)........................$65.00
116”, 27lbs ............................$795.00
121”, 29lbs............................$805.00
128”, 30lbs............................$865.00
128”, FIRECAT, 30lbs ...........$865.00
136”, 31lbs............................$865.00
144”, 33lbs............................$945.00
Options
Fox ZERO PRO Shock Kit (exchange)
02-164E....Includes shock, spring, keeper and spring adjuster ..........$185.00
Fox Float Shock Kit (exchange)
02-195E....MXR Fox Float assembly, Exchange..................................$185.00
Rear Idler Kit, Aluminum (exchange)
02-169E....Includes three 8” Aluminum idler wheels with aluminum
inserts & spacers. ..............................................................$185.00
Rear Idler Kit, Wear Resistant Aluminum (exchange)
02-215E....Includes three 8” Wear Resistant Idlers w/aluminum
inserts ................................................................................$295.00
4th Rear Rubber Idler Kit (exchange)
02-166E....Includes one 8” Rubber idler wheel and three spacers. ......$35.00
4th Rear Idler Kit, Aluminum (exchange)
02-171E....Includes four 8” Aluminum idler wheels with aluminum
inserts & spacers. ..............................................................$325.00
4th Rear Idler Kit, Wear Resistant Aluminum (exchange)
02-217E....Includes four 8” Wear Resistant Idlers w/aluminum
inserts. ................................................................................$375.00
Longer Front Arm upgrade, (exchange)
02-189E....Long Front Arm - Rubber Track, (4” Longer)........................$65.00
Long Travel Rear Scissor, 128”, Firecat, (exchange)
02-167E....Exchanges the Short travel for the long. ..............................$95.00
Long Travel Rear Scissor, 116”, 121”,128”, 136” & 144” (exchange)
02-168E....Exchanges the Short travel for the long. ..............................$95.00
Wear Resistant & Rubber
Track Suspension
Components
1997-Present Wahl Suspension Models
Front Arm
02-231…..Spring Eyebolt, 5/16” x 5” ......................................................$2.00
02-233…..Spring Roller ..........................................................................$4.95
02-236…..Front Arm Spring, RH............................................................$14.00
02-237…..Front Arm Spring, LH ............................................................$14.00
02-184…..Moly Limiter Tee, 1997-Present ............................................$24.00
02-186…..Limiter Eyebolt, 5 5/8” ............................................................$3.00
02-185…..Limiter Eyebolt, 6 5/8” ............................................................$3.50
02-187…..Limiter Eyebolt Spacer, Aluminum ..........................................$1.25
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4" ....................................$10.75
02-229…..Front Arm w/Torsion Springs ..............................................$115.00
02-242…..Front Arm w/Torsion Springs, FIRECAT ..............................$115.00
02-197…..Long Front Arm Assembly ..................................................$145.00
1
SUSPENSIONS & COMPONENTS
Suspension & Components
SUSPENSION & COMPONENTS
Suspension & Components
Order Line 800-883-0294
08 Grass/Ice Drag Suspension
Components
Wear Resistant Rubber
Track Suspension
Components Cont.
Replacement components for the
newest Wahl grass suspensions.
121”, 128”, 136” and 144”.
Rear Scissor
02-230A...Rear Scissor w/Idlers, '97-present, 1 3/4” Travel ..............$195.00
02-225A...Rear Scissor w/Idlers, Rubber Track, Firecat ....................$195.00
02-102A...Long Travel Rear Scissor w/Idlers, Rubber Track..............$225.00
02-101A...Long Travel Rear Scissor w/Idlers, Rubber Track, Firecat $225.00
02-239A...Rear Scissor Idler with Bearing, Rubber, 3 1/4" ..................$31.95
02-235A...Rear Scissor Idler with Bearing, Plastic, 3 1/4"....................$31.95
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4"....................................$10.75
Shocks
02-240…..Standard Shock, 1997-Present Rubber ............................$105.00
02-194…..Standard Spring Adjuster, 1.390” ID ....................................$12.00
02-192…..Fox Spring Keeper, 1 1/2” ID ................................................$8.00
02-200…..Standard Spring Keeper, 1 7/8” ID ......................................$14.00
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4”....................................$10.75
02-256…..Fox Shock Cross Shaft, 3/4” x 8 3/4" ..................................$11.75
02-246A...Standard Shock Assy, w/Keeper & Adjuster ......................$130.00
11-348A…Fox Float Shock, 12.5" Length, ea. ..................................$348.00
02-248A...Fox Shock, 1997-Present Rubber, (Shock Only) ..............$215.00
02-252A…Fox Shock Assy, w/Shaft, Spacers, Keeper & Adjuster ....$255.00
Rear Axle
02-254…..Aluminum Rear Axle, 13 3/4” ..............................................$34.00
02-208…..Tensioner Block, Rear Axle ....................................................$4.25
02-210…..Tensioner Bolt, 3/8”-16T x 4” ................................................$1.25
02-209A…Tensioner Block w/Adjuster Bolt & Fasteners........................$6.25
Rails
02-263…..Rubber Track Suspension Rail, 116” ................................$135.00
02-260…..Rubber Track Suspension Rail, 121” ................................$135.00
02-253…..Rubber Track Suspension Rail, 128” ................................$145.00
02-261…..Rubber Track Suspension Rail, 136” ................................$145.00
02-734…..Rubber Track Suspension Rail, 144” ................................$145.00
Front Arm Components
02-854…..Front Arm, '08 Grass..........................................................$145.00
02-856…..Front Arm Mounting Insert ....................................................$9.00
02-750…..Moly Limiter Tee ..................................................................$24.00
02-238…..Limiter Tee Cross Shaft, Aluminum......................................$10.75
02-185…..Limiter Eyebolt, 3/8” x 6 5/8”..................................................$3.50
02-187…..Limiter Eyebolt Spacer, Aluminum ........................................$1.25
Rear Arm Components
02-867A...Rear Scissor, '08 Grass ..............$170.00
02-875…..Aluminum Shaft, Rear Scissor,
3/4” x 7 1/2” ..................................$11.75
02-868…..Rear Scissor Limiter Tee................$18.00
02-869…..Limiter Tee Insert..............................$3.25
02-231…..Spring Eyebolt, 5/16” x 5” ......................................................$2.00
02-870…..Slider Block, Rear Spring, Plastic ..........................................$5.50
02-871…..Aluminum Insert, Slider Block................................................$2.25
02-872…..Plastic Inner Wear Tube, Torsion Spring, Rear......................$3.85
02-151…..Nylon Bushing, Lower Pivot Shaft ........................................$2.75
02-265A…Rear Scissor Idler with Bearing, 4 1/2” OD ........................$32.95
05-814…..NTN 1” Bearing with Set Screws (6205 Style) ....................$18.65
Torsion Springs
02-960…..LH Torsion Spring, .375” Wire Diameter ..............................$52.95
02-962…..RH Torsion Spring, .375” Wire Diameter ............................$52.95
02-964…..LH Torsion Spring, .393” Wire Diameter ..............................$52.95
02-966…..RH Torsion Spring, .393” Wire Diameter ............................$52.95
02-968…..LH Torsion Spring, .406” Wire Diameter ..............................$52.95
02-970…..RH Torsion Spring, .406” Wire Diameter ............................$52.95
Rear Axle Components/ Cross Shafts
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4"....................................$10.75
02-256…..Aluminum Cross Shaft, 3/4" x 8 3/4"....................................$11.75
02-329…..Shouldered Wheel Spacer (for 3 1/4” Idler) ..........................$5.00
02-254…..Aluminum Hex Rear Axle, 13 3/4" ......................................$34.00
02-874…..Aluminum Spacer, Rear Axle, 1.350” Long (Outer) ..............$3.50
02-873…..Aluminum Spacer, Rear Axle, 4.085” Long (Center)..............$6.75
02-208…..Tensioner Block, Rear Axle....................................................$4.25
02-210…..Tensioner Bolt, 3/8”-16T x 4” ................................................$1.25
Shocks
11-335…..Fox Shock, Float, MXR, ea. ..............................................$310.00
02-153…..Plastic Insert, Fox Float Shock, 3/4" x 7/8” x 3/4" Long ........$2.75
11-293…..Aluminum Insert, 3/8” ID ........................................................$2.95
Idler Wheels
02-387…..Lightweight Idler Wheel, 8” Rubber ....................................$29.95
02-699A...Wear Resistant Wheel, 8” ..................................................$129.95
02-383…..Lightweight Idler Wheel, 3 1/4”, Rubber ..............................$16.95
02-691A...Wear Resistant Wheel, 3 1/4" ..............................................$42.95
02-291A…Lightweight Idler Wheel w/ Spacer, 3 1/4", Rubber ............$23.00
02-840A…Wear Resistant Wheel w/ Spacer, 3 1/4" ............................$44.95
02-301A…Lightweight Centered Dual Wheel Kit, 3 1/4" Rubber ........$49.95
02-839A…Wear Resistant Centered Dual Wheel Kit, 3 1/4"................$89.95
02-305A....Lightweight Triple Wheel Kit, 3 1/4” Rubber ......................$64.95
02-846A…Wear Resistant Triple Wheel Kit, 3 1/4" ............................$124.95
Rails
02-736…..Grass Drag Suspension Rail, 121”/ 128” ..........................$135.00
02-738…..Grass Drag Suspension Rail, 136”/ 144” ..........................$145.00
'08 Wahl Grass/ Ice Suspension
The latest suspension
that every calls about.
There is no other suspension available that
maintains traction in
the rough as this can.
Featuring a new array of suspension components from the
front arm to the rear scissor, these suspensions sport two
Fox Float Shocks and Dual Rear Torsion Springs. We offer
these with Wear Resistant Billet wheels or standard rubber
wheels. Available in four lengths, 121”, 128”, 136” or 144”,
these suspensions put you in the winners circle. (Wheel
quantities are listed with suspensions.)
Rubber
02-882A…..'08
02-883A…..'08
02-884A…..'08
02-885A…..'08
Grass
Grass
Grass
Grass
Suspension,
Suspension,
Suspension,
Suspension,
121”,
128”,
136”,
144”,
(16
(18
(21
(23
-
3
3
3
3
1/4"
1/4"
1/4"
1/4"
Wheels)
Wheels)
Wheels)
Wheels)
........$1995.00
........$2035.00
........$2125.00
........$2155.00
Suspension,
Suspension,
Suspension,
Suspension,
121”,
128”,
136”,
144”,
(16
(18
(21
(23
-
3
3
3
3
1/4"
1/4"
1/4"
1/4"
Wheels)
Wheels)
Wheels)
Wheels)
........$2345.00
........$2395.00
........$2495.00
........$2550.00
Wear Resistant
02-886A…..'08
02-887A…..'08
02-888A…..'08
02-889A…..'08
Grass
Grass
Grass
Grass
Ice Drag w/o Wheel Kits
02-890A…..'08
02-891A…..'08
02-892A…..'08
02-893A…..'08
Ice
Ice
Ice
Ice
Drag
Drag
Drag
Drag
Suspension,
Suspension,
Suspension,
Suspension,
121”
128”
136”
144”
......................................$1675.00
......................................$1675.00
......................................$1795.00
......................................$1795.00
2
Order Line 800-883-0294
Oval Race
Suspension
Rear Torsion Springs: Available in the softer .375” wire diameter and a
stiffer .406” wire diameter.
02-960…..LH Torsion Spring, .375” Wire Diameter ..............................$52.95
02-962…..RH Torsion Spring, .375” Wire Diameter ............................$52.95
02-964…..LH Torsion Spring, .393” Wire Diameter ..............................$52.95
02-966…..RH Torsion Spring, .393” Wire Diameter ............................$52.95
02-968…..LH Torsion Spring, .406” Wire Diameter ..............................$52.95
02-970…..RH Torsion Spring, .406” Wire Diameter ............................$52.95
Rear Axle and Cross Shafts
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4”....................................$10.75
02-256…..Aluminum Cross Shaft, 3/4” x 8 3/4"....................................$11.75
02-254…..Aluminum Hex Rear Axle, 13 3/4” ......................................$34.00
02-873…..Aluminum Idler Spacer, Center, 4.085” ..................................$6.75
02-874…..Aluminum Idler Spacer, Outer, 1.350”....................................$3.50
02-208…..Tensioner Block Assembly, Rear Axle....................................$4.25
02-210…..Tensioner Bolt, 3/8”-16T x 4” ................................................$1.25
Shocks
02-876A…Fox Shock Assembly, (Includes Inserts)............................$259.95
02-245…..Plastic Insert, Fox Shock, 3/4" x 1” x 3/4" Long ....................$1.50
11-293…..3/8” ID Aluminum Shock Eyelet Insert ..................................$2.95
11-291…..Aluminum Shock Eyelet Insert, 5/16'' ID, ea. ........................$2.95
Replacement Wheels
02-388…..Idler Wheel, 8”......................................................................$28.95
02-378…..Idler Wheel, 5.350” (Limiter tee shaft) ................................$18.95
02-327A...Rear Scissor Idler w/Bearing, 5” ..........................................$32.95
02-371…..Idler Wheel, 2 3/4" ..............................................................$13.95
Rail Components
02-824…..Oval Suspension Rail, 116”................................................$160.00
02-825…..Oval Suspension Rail, 121” ..............................................$160.00
02-826…..Slide Rail Nose Piece, Plastic................................................$6.95
02-004…..UHMW Slide, Standard, ea. ................................................$21.00
02-022…..Super Slippery Slide, ea. ....................................................$48.00
02-042…..Hyperfax, Wahl Suspension, pr. ........................................$189.95
02-001…..Standard UHMW Slide, 1.475” wide (For 13 1/2” tracks) ....$29.95
The same suspension
used in our winning
Champ 440 & Open 600
machines. Suspensions
are available for the 106”, 116” & 121” Rubber Tracks.
Features .393” diameter torsion springs on rear arm with a
Fox Shock. Torsion springs are available in softer or stiffer
compositions. Ride height is adjustable with a limiter bolt on
rear arm. Front arm is of an open design with an adjustable
limiter and one torsion spring. The open design of the suspension arm allows the suspension rails to pass through for
added travel. The three rear idlers are 8” and have additional
track deflection wheels throughout suspension. Extra wide
slides that are for use with the narrower tracks are available
at an exchange price or separately. It has two lube line fittings through rail and add-on side lube fittings are also available separately. Please specify your type of machine and
rider weight when ordering. 106” suspension components are
available upon special request.
02-814A…..Oval Race Suspension, 106”, 31 lbs ............................$1295.00
02-818A…..Oval Race Suspension, 116”, 32 lbs ............................$1295.00
02-819A…..Oval Race Suspension, 121”, 33 lbs ............................$1295.00
Oval Susp. Options
02-169A…..Rear Idler kit, Aluminum (Exchange): includes three 8”
Aluminum Idlers with aluminum inserts. ..........................$185.00
02-215A…..Rear Idler Kit, Wear Resistant Aluminum (Exchange):
Includes three 8” wear resistant aluminum idlers with aluminum
inserts. ............................................................................$295.00
02-226E…..Extra Wide UHMW Slides, pr. (Exchange) ....................$24.95
Lubrication System
Wahl Brothers offers an entire
lube system for use in Oval racing. This lube system includes 6
lube line inserts for restricting
and helping to regulate the flow
of fluid through the line, 4 T fittings, 4 Side lube fittings with
clamps, 2-90 degree fittings with grommet for running the
lines through tunnel, 10 ft. of 3/16” fuel line, 1 dual outlet fuel
pump and one shut off valve. This system is designed to be
used in conjunction with the Wahl Champ suspension that
already has 2 lube line fittings in the rail. Parts can be purchased as a kit or independently. Lube tanks and through the
rail brass lube fittings are sold separately.
Extras
06-763A…Side Lube Fitting with Clamp, ea. ........................................$8.95
06-696…...Brass Lube Fitting, 1/4”-20 Thread, ea. ................................$4.75
06-785A....Lubrication System ............................................................$119.95
Oval Suspension Components
Front Arm
02-860…..Front Arm, Oval, Champ Suspension ................................$145.00
02-861…..Front Arm Mounting Insert, Aluminum ..................................$7.00
02-862…..Moly Limiter Tee ..................................................................$24.00
02-827…..Front Limiter Idler Shaft, Aluminum ....................................$28.00
02-186…..Limiter Eyebolt, (Front & Rear), 3/8” x 5 5/8” ........................$3.00
02-187…..Limiter Eyebolt Spacer, Aluminum ........................................$1.25
02-863…..Limiter Safety Strap, 1 1/8” x 16” ..........................................$5.00
02-236…..Front Arm Torsion Spring, RH ..............................................$14.00
02-237…..Front Arm Torsion Spring, LH ..............................................$14.00
02-864…..Front Arm Spring Slider..........................................................$5.25
02-865…..Plastic Inner Wear Tube, Front Arm Spring ..........................$3.50
02-866…..Spring Tensioner Eyebolt, Front Arm ....................................$7.50
Lube System
06-785A…Lubrication System ............................................................$119.95
Lube System Replacement Parts
02-349…..Aluminum Lube Line Insert, .050'' ID ....................................$2.15
06-764…..Fuel Line T-Fitting, 3/16''........................................................$1.85
06-766…..90 Degree Fitting w/Grommet, 3/16'' & 1/4'' ..........................$4.25
06-740…..Fuel Line, 10 ft., 3/16'' ID ......................................................$9.95
06-710…..Fuel Pump. Dual Round (Flush Mount) ..............................$29.95
06-772…..Fuel Shut Off Valve, 1/4'’......................................................$11.50
06-697…..Brass Lube Fitting, Press-In ..................................................$3.95
06-696.....Brass Lube Fitting, 1/4”-20 ....................................................$4.75
06-763A...Side Lube Fitting w/Clamp ....................................................$8.95
06-956.....Wedge Lube Tank, 3.3 qts. ..................................................$50.00
06-944.....Lube Tank Cap ....................................................................$10.45
Rear Scissor
02-867A…Rear Scissor ......................................................................$170.00
02-868…..Rear Scissor Limiter Tee......................................................$18.00
02-875…..Aluminum Shaft, Rear Scissor, 3/4” x 7 1/2”........................$11.75
02-869…..Limiter Tee Insert, Aluminum..................................................$3.25
02-231…..Spring Eyebolt, 5/16” x 5” ......................................................$2.00
02-870…..Rear Spring Slider Block, Plastic ..........................................$5.50
02-871…..Aluminum Insert, Slider Block................................................$2.25
02-872…..Plastic Inner Wear Tube, Torsion Spring, Rear......................$3.85
02-151…..Plastic Bushing, Rear Scissor................................................$2.75
3
SUSPENSIONS & COMPONENTS
Suspension & Components
SUSPENSION & COMPONENTS
Suspension & Components
Order Line 800-883-0294
Cleated Ice Suspensions
Wahl 2010 Asphalt
Suspension
Building stronger and
easily tunable suspensions has always been a
priority at Wahl Bros. New
designed front and rear
suspension arms are
stronger, lighter and have less flex than the previous designs.
The dual front limiter eye bolts increase your ability to adjust
the straightness of your machine. Rail centers are 7 1/2”.
These frames come standard with an oil shock, two rear
idlers, a front wheel kit and UHMW slides. We can install any
other option you desire. Some are listed with the exchange
price. Wheel kits designed for the grass work great in all minimal lube conditions. Please supply us with rider weight, type
of machine and the intended use for proper spring selection.
Cross shafts and mounting brackets are supplied, please
check the tunnel width of your machine.
02-110A….Cleated Track
02-112A….Cleated Track
02-114A….Cleated Track
02-116A….Cleated Track
02-118A….Cleated Track
Suspension,
Suspension,
Suspension,
Suspension,
Suspension,
102”, 21 lbs
112”, 23 lbs
118”, 24 lbs
121”, 25 lbs
132”, 27 lbs
Our newest suspension for
asphalt drag racing. Featuring
Fox Float Shocks front and rear for infinite adjustability. Dual
front limiter bolts mounted outward make for easy front arm
adjustment. Location of the billet 3 1/4” rollers is easily
accomplished with the fully drilled suspension rails. The aluminum 9” rear idlers along with the open rear suspension
arm design keeps the top of the track flat from drivers to rear
idlers. Adjustable height carrier wheels help accomplish that
allowing for greater top speed and increased ET’s. A serious
suspension for serious racers.
02-894A…..2010 Wahl Asphalt Suspension, 121” ..........................$2895.00
02-895A…..2010 Wahl Asphalt Suspension, 128” ..........................$2895.00
02-896A…..2010 Wahl Asphalt Suspension, 136” ..........................$2895.00
..........................$745.00
..........................$745.00
..........................$745.00
..........................$745.00
..........................$775.00
2010 Asphalt
Suspension
Components
Cleated Suspension Options
02-126E…Fox ZERO PRO Shock Kit (exchange) Includes shock,
spring, keeper and threaded spring adjuster. ..................$185.00
02-128E…3rd Rear Idler Kit (exchange) Includes shaft with
spacers and one 8” idler wheel...........................................$35.00
02-127E....Aluminum Rear Idlers, 2-wheel (exchange) 2-Billet 8”
Aluminum Wheels w/Inserts..............................................$120.00
02-213E....Wear Resistant Rear Idlers, 2-wheel (exchange)
2- Wear Resistant 8” Idlers w/Inserts................................$175.00
02-169E....Aluminum Rear Idlers, 3-wheel (exchange)
3-Billet 8” Aluminum Wheels w/Inserts ............................$185.00
02-215E.....Wear Resistant Rear Idlers, 3-wheel (exchange)
3- Wear Resistant 8” Idlers w/Inserts................................$295.00
02-129E…Long Travel Rear Scissor (exchange) Increases travel
from 1 3/4” to 3”. ................................................................$95.00
Replacement components for the
asphalt race suspensions. 121”,
128” and 136”.
Front Arm Components
01-250….Moly Front Arm....................................................................$155.00
01-251….Shaft, Front Arm Pivot, 3/4” x 11 3/8” ..................................$12.50
01-252….Limiter Bolt w/Tube ..............................................................$22.50
01-253….Pivot Slider, Limiter Bolt........................................................$18.00
01-254....Insert, Rail, Pivot Slider, '10 Asphalt......................................$15.00
01-245….Moly Shock Mount, Front, Float R ........................................$48.00
02-151….Bushing, Plastic, 3/4” ID ea. ..................................................$2.75
Rear Arm Components
02-739.…Shock Shaft, Rear, Splined, ea. ..........................................$155.00
02-742….Aluminum Housing w/Bushing, Rear Shock Shaft, ea. ........$64.95
02-743….Aluminum Rear Arm w/Bushing, Splined, ea. ......................$57.95
02-746….Moly Link, Rear Arm, ea. ......................................................$65.00
02-748….Steel Insert, Moly Rear Link, Shouldered, ea. ......................$19.95
02-759….Insert, Moly Link, ea. ..............................................................$4.00
01-244….Moly Shock Mount, Rear, MXR ............................................$48.00
Shocks
11-335….Fox Shock, Float, MXR, 10 1/4”, ea....................................$310.00
11-333….Mini Fox Float R Shock, 7 7/8”, ea ....................................$254.95
11-291….Aluminum Shock Eyelet Insert, 5/16” ID, ea. ..........................$2.95
11-293….Aluminum Shock Eyelet Insert, 3/8” ID, ea. ............................$2.95
Carrier Wheels
01-246….Carrier Wheel Bracket, RH, Aluminum ................................$16.00
01-247….Carrier Wheel Bracket, LH, Aluminum ..................................$16.00
02-405A..Idler Wheel, 3 1/4” Aluminum, 5/8” ID ..................................$41.50
01-248….Shaft, Carrier Wheel, Shouldered ........................................$18.00
01-249….Spacer, Outer, Carrier Wheel Shaft ........................................$2.50
Add On
Carrier Wheel Kit
02-125A....Carrier Wheel Kit: Two 3 1/4” idler wheels pressed
on rear scissor to deflect guides
on tracks used for oval racing.............................................$63.95
02-121A…Dual Wheel Kit: Includes 7 1/4” shaft, spacers, fasteners
and two 2 ¾” idler wheels. Can be used below front arm
at the bend of the rail. ........................................................$43.00
02-122A…Suspension Wheel Kit: Includes four 5” wheels with
spacers, two 5” wheels with blocks and fasteners
Fits 102” through 121” ......................................................$145.00
02-124A....Suspension Wheel Kit: Includes six 5” wheels with
spacers, two 5” wheels with blocks and fasteners
Fits: 132” ..........................................................................$190.00
Cleated Track Suspension
Components
Replacement Front Arm and Rear Scissor parts for the
1997-current Wahl Bros. Cleated Suspensions.
2010 Asphalt Suspension Components Continued Next page...
02-179A...Front Arm w/Torsion Springs, Cleated................................$115.00
02-182A...Rear Scissor, w/Idlers, 1997-Present, Cleated ..................$195.00
02-239A...Rear Scissor Idler w/Bearing, Rubber..................................$31.95
02-184…..Moly Limiter Tee, '97-Present ..............................................$24.00
02-188…..Aluminum Cross Shaft, 5/8” x 7 1/4"....................................$10.75
4
Order Line 800-883-0294
Front Arm Kit
(Update)
...2010 Asphalt Susp. Comp. Continued
The torsion type adjustable spring
setup for the front arm replaces the
pre-2000 die spring system. Kit
includes front arm with springs, two
spring rollers, and two 5/16” x 4 1/2” eyebolts.
Rollers
02-788A....Asphalt Roller Assy, Five Wheel
(Includes bearings, shaft, spacers) ..................................$194.95
02-789A....Asphalt Roller Assy, Six Wheel
(Includes bearings, shaft, spacers) ..................................$199.95
02-786…..Axle, Aluminum Roller, Shouldered, 11.345” ......................$19.50
02-787…..Aluminum Axle Spacer, Roller................................................$4.50
Rear Axle Components
02-420A…9” Spoked Aluminum Idler Wheel, 6205 Bearing ..............$129.95
01-243…..Aluminum Rear Axle, ea. ....................................................$42.00
01-241…..Aluminum Spacer, Rear Axle, Center, ea. ............................$4.50
01-242…..Aluminum Spacer, Rear Axle, Outer, ea. ..............................$4.00
02-207…..Rear Axle Adjusting Bushing, Alum., ea. ............................$24.95
02-201…..Tensioner Block, Rear Axle, 7/16”-14T, ea. ........................$13.95
02-203…..Tensioner Bolt, 7/16”-14 x 3 5/8”, ea. ..................................$11.60
Rails
02-783…..2010 Asphalt Suspension Rail, 121”..................................$185.00
02-784…..2010 Asphalt Suspension Rail, 128”..................................$185.00
02-785…..2010 Asphalt Suspension Rail, 136” ................................$185.00
02-227A…..Front Arm Kit, Update, Rubber Track Suspension ..........$125.00
Front Arm
Suspension
Adjuster
Now you can easily adjust your
front arm with little effort and
easy to install hardware. Composed of lightweight Aluminum
and Moly-plating, this adjuster allows 1 1/2” of heightening
and lowering adjustment. Comes with 10-32 cap screws that
can be easily placed into your tunnel. Available with a stainless steel adjuster bolt, Wahl Brothers has made one more
way to make your testing easier and more efficient.
Suspension Mounting Components
When sold as a kit these shafts are supplied with the necessary bushings to convert your Wahl Bros. Suspension to any
machine. Kit consists of two aluminum shafts and four nylon
bushings. Special widths are also available.
Adjuster
02-181A... Front Arm Suspension Adjuster, Stainless Steel Bolt, pr...$137.50
Replacement Components
02-1831….Aluminum Adjuster Bracket, Outer, Front Arm, ea. ............$24.95
02-1835….Suspension Adjuster Bolt, Stainless Steel, Front Arm, ea. $28.95
02-1833….Adjuster Bolt Sleeve, Front Arm, ea. ....................................$5.95
02-1834….Steel Adjuster Plate, Inner Front Arm, ea. ............................$9.25
Cross Shaft Kits
02-131A....Cross Shaft Kit, Arctic Firecat, 13 3/4”................................$34.00
02-133A....Cross Shaft Kit, IQ Chassis, 15 1/2" ..................................$34.00
02-130A....Cross Shaft Kit, Old Style Arctic & Yamaha, 15 7/8” ..........$34.00
02-132A....Cross Shaft Kit, Polaris & Ski-Doo DSA Present, 16 1/4” ..................................................................$34.00
02-134A....Cross Shaft Kit, 1997- Present Yamaha, IFS, 16 1/2" ........$34.00
02-136A....Cross Shaft Kit, Newer Arctic's, 16 3/4"..............................$34.00
02-137A....Cross Shaft Kit, 17" ............................................................$34.00
02-138A....Cross Shaft Kit, Yamaha Telescopic Strut, 17 1/4" ............$34.00
02-140A....Cross Shaft Kit, Ski-Doo, PRS, 17 1/2" ..............................$34.00
Cross Shafts
02-141…..Aluminum Cross Shaft, 13 3/4"............................................$12.50
02-145…..Aluminum Cross Shaft, 15 1/2"............................................$12.50
02-143…..Aluminum Cross Shaft, 15 7/8”............................................$12.50
02-142…..Aluminum Cross Shaft, 16 1/4"............................................$12.50
02-144…..Aluminum Cross Shaft, 16 1/2"............................................$12.50
02-146…..Aluminum Cross Shaft, 16 3/4"............................................$12.50
02-147…..Aluminum Cross Shaft, 17"..................................................$12.50
02-148…..Aluminum Cross Shaft, 17 1/4"............................................$12.50
02-149…..Aluminum Cross Shaft, 17 1/2"............................................$12.50
Cross Shaft Bushings
02-150…..Nylon Bushing, For 13 3/4",15 1/2", 15 7/8” &
16 1/4” Shafts........................................................................$2.15
02-151…..Nylon Bushing, For 16 1/2” Shafts ........................................$2.75
02-154…..Nylon Bushing, For 16 3/4” Shafts ........................................$2.75
02-157…..Nylon Bushing, For 17” Shafts ..............................................$2.75
02-156…..Nylon Bushing, For 17 1/4” Shafts ........................................$2.75
02-158…..Nylon Bushing, For 17 1/2” Shafts ........................................$2.75
02-155…..Nylon Bushing, 3/4” ID, 1” OD x 1” Long (non-machined) ....$2.15
Long Travel Front Arm
This front arm is 4” longer than the
original arm found on most of the
Wahl suspensions before 2005. It
requires that your rails have two
different mounting locations for the
front arm. The longer front arm
helps to slow the dampening
process that takes place in the front suspension. Sold with all
parts needed to place in your suspension.
02-178A….. Long Front Arm Assy. Rubber Track ..............................$165.00
Front Arm Springs
Fits earlier cleated and rubber
track suspensions w/o torsion
springs. These springs are
used on the front limiter Tee to
help with front arm tension.
They can be incorporated into almost any Wahl Suspension.
Suspension Mounting Brackets
02-350…..3” Front Arm Spring, 228 lb., Blue ......................................$12.00
02-352…..3 1/2” Front Arm Spring, 224 lb., Blue ................................$12.00
02-354…..3” Front Arm Spring, 258 lb., Red ........................................$12.00
02-356…..3 1/2” Front Arm Spring, 280 lb., Red..................................$12.00
02-358…..3” Front Arm Spring, 490 lb., Gold ......................................$12.00
02-360…..3 1/2” Front Arm Spring, 480 lb., Gold ................................$12.00
Includes two front and two rear
mounting plates along with .. rivets
to fasten. Used to mount Wahl suspensions into your stock tunnel.
02-159A…Suspension Mounting Brackets ..........................................$12.95
5
SUSPENSIONS & COMPONENTS
Suspension & Components
SUSPENSION & COMPONENTS
Suspension & Components
Order Line 800-883-0294
Long Travel Rear Scissor
Suspension Springs
Designed for use on the grass or
snow where more weight transfer may be desired. This increases the travel from 1 3/4” to 3”.
Your standard shock may be
used with this assembly. Rear
Scissor mounting location is 1” higher in the tunnel. Works on
all width tracks.
9” Progressive Suspension Springs
All springs fit the standard oil shock or
the Fox shock on all Wahl Suspension
except for two springs denoted as having a smaller ID. They fit the Progressive Oil shocks and
older Arctic Cat shocks only because the diameter is smaller.
02-279 ....9”
02-281 ....9”
02-282 ....9”
02-283 ....9”
02-284 ....9”
02-285 ....9”
02-286 ....9”
02-287 ....9”
Scissor Assemblies
02-102A....Long Travel Rear Scissor, ‘97-Present Rubber Track ......$225.00
02-101A....Long Travel Rear Scissor, Rubber, Firecat ......................$225.00
Components
01-059…..Long Travel Aluminum Link, ea. (w/Bronze Bushing) ..........$27.25
02-098…..Long Travel Rear Scissor, Rubber (painted part only) ......$115.00
02-109A...2 3/4” Dual Wheel Kit, Long Travel Rear Scissor, Rubber ..$43.00
02-108A...2 3/4” Dual Wheel Kit, Long Travel Rear Scissor, Wear
Resistant ..............................................................................$89.95
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Suspension
Suspension
Suspension
Suspension
Suspension
Suspension
Suspension
Suspension
Spring,
Spring,
Spring,
Spring,
Spring,
Spring,
Spring,
Spring,
70/100 lb, 1 5/8” ID ......$40.00
100/140 lb, 1 5/8” ID ....$40.00
115/155 lb, 1 7/8” ID ....$40.00
130 lb, 1 7/8” ID ..........$40.00
155 lb, 1 7/8” ID ..........$40.00
175 lb, 1 7/8” ID ..........$40.00
195 lb, 1 7/8” ID ..........$40.00
200/350 lb, 1 7/8” ID ....$40.00
Polaris Shock Springs
Narrow Track Rear
Scissor Conversion
These Genuine Polaris Springs, unless
otherwise noted, are available in 4
lengths. ID is 1 7/8”. Can be used for front
suspension springs and rear suspension
springs.
This Long Travel kit moves a carrier wheel kit into the middle of your
rails to help with support on the narrow tracks. An adaptable
arm that bolts right into your current long travel aluminum link
on your Wahl Bros. Rear scissor. This is the upper portion of
the scissor only. For the 13.5” & 14” rubber tracks.
6” Spring
02-900.....85 lb. Black Spring, OEM 7041830-067 ..............................$79.95
02-901.....100 lb. Black Spring, OEM 7041831-067 ............................$81.45
02-902.....120 lb. Black Spring, OEM 7041832-067 ............................$79.95
02-903.....140 lb. Black Spring, OEM 7041833-067 ............................$79.95
02-905.....200 lb. Silver Spring ............................................................$74.50
7” Spring
02-906.....85 lb. Black Spring, OEM 7041362-067 ..............................$69.75
02-907.....100 lb. Black Spring, OEM 7041678-067 ............................$69.75
02-908.....120 lb. Black WORKS Spring, (1.780” ID)............................$60.00
02-909.....150 lb. Black WORKS Spring, (1.780” ID)............................$60.00
02-910.....160 lb. Black Spring, OEM 7041826-067 ............................$59.50
02-911.....180 lb. Black Spring, OEM 7041827-067 ............................$57.95
02-912.....200 lb. Black Spring, OEM 7041828-067 ............................$57.95
02-913.....220 lb. Black Spring, OEM 7041829-067 ............................$51.95
7.50” Spring
02-915.....85 lb. Black Spring, OEM 7041561-067 ..............................$57.95
02-916.....126 lb. Black Spring, OEM 7041364-067 ............................$26.95
02-917.....160 lb. Black Spring, OEM 7041914-067 ............................$28.95
02-918.....170 lb. Black WORKS Spring, (1.780” ID)............................$45.00
02-919.....170 lb. Black Spring, OEM 7042050-067, (Larger ID) ........$26.95
02-920.....190 lb. Black Spring, OEM 7041870-067 ............................$46.50
02-921.....200 lb. Black Spring, OEM 7041797-067 ............................$46.50
02-922.....200/variable lb. Black Spring, OEM 7041253-067 ..............$57.95
02-923.....225 lb. Black Spring, OEM 7041822-067 ............................$34.95
02-924.....250 lb. Black Spring, OEM 7041792-067 ............................$34.95
9” Spring
02-930.....120 lb. Black Spring, OEM 7041701-067 ............................$57.95
02-931.....140 lb. Black Spring, OEM 7041677-067 ............................$29.25
02-932.....160 lb. Black Spring, OEM 7041671-067 ............................$83.95
02-933.....180 lb. Black Spring, OEM 7041672-067 ............................$40.75
02-934.....200 lb. Black Spring, OEM 7041673-067 ............................$52.35
02-935.....220 lb. Black Spring, OEM 7041674-067 ............................$34.95
02-747A....Narrow Track Conversion Scissor, Rubber Wheels..........$160.00
02-749A....Narrow Track Conversion Scissor,
Wear Resistant Wheels ....................................................$205.00
Rear Scissor
Assemblies
The newest technology available
from the suspension department at
Wahl Bros. Racing. This lightweight,
long travel rear scissor is featured on the Wahl Bros. newest suspensions available. The transfer of this scissor can be altered to
conform to your needs. Works with Wahl Bros. newest rails, rail
modification may have to be made for others. There are two styles
available. Both assemblies include the rear scissor, spring sliders,
pivot shaft and carrier wheels. Order the torsion springs separately.
Assemblies
02-859A....Oval & ‘08 Grass Rear Scissor Assembly ........................$325.00
02-858A....’08 Asphalt Rear Scissor Assembly ..................................$325.00
Torsion Springs
02-960…..LH Torsion Spring, .375” Wire Diameter ..............................$52.95
02-962…..RH Torsion Spring, .375” Wire Diameter ............................$52.95
02-964…..LH Torsion Spring, .393” Wire Diameter ..............................$52.95
02-966…..RH Torsion Spring, .393” Wire Diameter ............................$52.95
02-968…..LH Torsion Spring, .406” Wire Diameter ..............................$52.95
02-970…..RH Torsion Spring, .406” Wire Diameter ............................$52.95
6
Order Line 800-883-0294
Genuine Polaris
Torsion Springs
Shock Wrench
Heat treated alloy steel. Fits most shock
applications. This shock wrench is for
smaller shock spring adjusters like the one
found on Wahl suspensions with an oil shock.
These genuine Polaris Torsion
Spring Kits are sold as pairs
and are available with two different angles. The 77 degree spring is stiffer than the 90
degree spring. Wire diameter indicates the stiffness of the
spring. The larger diameter is stiffer.
02-318…..Shock Wrench, Single............................................................$7.75
Shock Spring Tools
These tools are used for removing,
installing or adjusting the spring on a coil
over shock. Quick, simple, and safe to
use.
Square 77 degree
02-946…..77 Degree Torsion Spring Kit, Wire Diameter .405” ..........$119.99
Square 90 degree
02-952…..90 Degree Torsion Spring Kit, Wire Diameter .375” ............$76.99
Round
Sold individually, these Torsion
springs mount within the suspension with the use of
adjustable eyebolts. Used in
Polaris suspensions from 1985-1992 and in Wahl Bros. Oval
and new Grass suspensions.
02-315…..Shock Spring Tool ................................................................$49.95
02-316…..Shock King Spring Tool ........................................................$29.95
Tunnel Protectors
Aluminum
These aluminum tunnel protectors are
1” high, 7/8” wide and 50 1/2” long.
Sold as a pair with rivets.
375”
02-960…..LH Sport Type Torsion Spring, Wire Diameter .375”,
OEM-7041318-067 ..............................................................$52.95
02-962…..RH Sport Type Torsion Spring, Wire Diameter .375”,
OEM-7041319-067 ..............................................................$52.95
.393”
02-964…..LH Sport Type Torsion Spring, Wire Diameter .393”,
OEM-7041119-067................................................................$52.95
02-966…..RH Sport Type Torsion Spring, Wire Diameter .393”,
OEM-7041120-067 ..............................................................$52.95
.406”
02-968…..LH Sport Type Torsion Spring, Wire Diameter .406”,
OEM-7041320-067 ..............................................................$52.95
02-970…..RH Sport Type Torsion Spring, Wire Diameter .406”,
OEM-7041321-067 ..............................................................$52.95
02-070.....Tunnel Protector, Aluminum, pr. ..........................................$42.00
Plastic
Plastic protectors, OEM's for Ski-Doo and Polaris, whatever
your application or need. The three Ski-doo choices listed are
the working heights. The Polaris is OEM rivet pattern and “U”
shaped.
02-071.....Polaris, Plastic Tunnel Protector, 1 1/4”x1” high, 55” long ..$14.95
02-072.....Ski-Doo Tunnel Protector Slide, 1 1/4” high, 50” long..........$10.35
02-073.....Ski-Doo Tunnel Protector, 1” high, 50” long ..........................$8.50
02-074.....Ski-Doo Tunnel Protector, OEM 1/2” high, 50” long ..............$5.95
Rear Close-Off Panels
Coil Over Adapter Kit
Aluminum Rear Close Offs available in
one piece, .063” 6061-T6 or in 3-piece
rivet together models.
This threaded coil over kit can be
used on Fox Shocks w/o a threaded
body and also on oil shocks used in
our Wahl Bros. Suspensions. Length
is 4” and has a 1.560” ID or 1.650”
ID. Both have a 1.840” OD. Comes with adjuster nut and a
nylon tip set screw. The 1.650” ID coil over adapter kit fits the
Polaris OEM shock found on the Formula 500 race
machines. Sold individually
02-466.....Polaris Rear Close Off, PreEdge, 1pc. ................................$60.00
02-459.....Polaris Edge and Ski-Doo REV Rear Close Off,1 pc...........$60.00
02-467.....Ski-Doo Rear Close Off, 1 pc. ..............................................$60.00
02-468.....Polaris Rear Close Off, Fusion & IQ, 1pc.............................$60.00
02-469.....Polaris Rear Close Off, Edge, 3 pc. ....................................$60.00
Tunnel Extension w/Close Off
The same extension used on earlier Wahl Bros. Drag
Chassis. Made of .063” aluminum, they are 16 1/2” Wide, 14”
Long & 9” tall.
Adaptor Kits
02-319A…Coil Over Adapter Kit, Oil Shock, 1.560” ID ........................$39.95
02-320A…Coil Over Adapter Kit, Fox Shock, 1.650” ID ......................$39.95
Components
02-321…..Coil Over Adapter Nut w/Set Screw ....................................$18.95
02-322…..Set Screw, Nylon Tip..............................................................$1.65
02-323…..Threaded Sleeve For Coil Over Kits, 1.560” ID ..................$19.95
02-324…..Snap Ring For 02-319 Coil Over Kits ....................................$1.00
02-325…..Threaded Sleeve for Coil Over Kits, 1.650” ID ....................$19.95
02-461.....Tunnel Extension with Close Off ..........................................$95.00
Snow Flap Material
This 2-ply snow flap material is 18 1/2” wide
and 3/16” thick. Both sides are rubber
backed. Priced per foot.
7
02-465…..Snow Flap Material (per ft) ....................................................$8.75
14-333.. ...6” Nylon coated, Stainless Steel Lanyard, ea. ......................$3.25
14-334.. ...8” Nylon coated, Stainless Steel Lanyard, ea. ......................$3.25
SUSPENSIONS & COMPONENTS
Suspension & Components
SUSPENSION & COMPONENTS
Suspension & Components
Order Line 800-883-0294
UHMW Slides
Super Slippery Slides
UHMW slides match factory quality and specifications.
Sold individually.
These are the original Super Slippery Slides. Composed of a
tough Teflon/UHMW mix, they absolutely cut friction to a
bare minimum. Sold Individually.
Wahl Suspensions
02-001…..Wahl Bros. Wide Slides, 1.475'' Wide x 52'' Long
for 13 1/2” Tracks ................................................................$29.95
02-004…..UHMW Slides, 52 1/2”, for Wahl Susp. '97-Present,
121”, 128”, 136” ....................................................................$21.00
02-005…..UHMW Slides, 64”, for Wahl Suspension, 144'' ..................$22.00
Arctic
02-002…..UHMW Slides, 52 1/2”, Arctic, #10 Profile ..........................$13.00
02-011…..UHMW Slides, 64”, Arctic, #10 Profile ................................$15.50
Polaris
02-006…..UHMW Slides, 54”, Polaris, #15 Profile ..............................$13.50
02-008…..UHMW Slides, 53 ½”, Polaris Storm Wide, #18 Profile ......$14.00
02-009…..UHMW Slides, 57”, Polaris Extra Lite, Edge & RMK, #23 ..$13.50
02-012…..UHMW Slides, 64”, Polaris, All IQ, #24 Profile ....................$16.75
Ski-Doo
02-010…..UHMW Slides, 55 3/8”, Old Ski-Doo Wide, #1 Profile ........$16.25
02-013…..UHMW Slides, 51 1/2”, Ski-Doo, #21 Profile
(7/8” Wide Rail) ....................................................................$13.50
02-015…..UHMW Slides, 41 5/8”, Ski-Doo ‘05-Present,
#26 Profile (1” Wide Rail) ....................................................$13.00
Yamaha
02-014…..UHMW Slides, 54 3/4”, Older Dovetail Style, Yamaha, #12 $13.00
02-016…..UHMW Slides, 54”, Newer T-Slot Style, Yamaha, #16 ........$13.00
02-018…..UHMW Slides, 50”, '97-’04 V-Max 500, 600 & 700,
SX & SRX Yamaha, #20 Profile ..........................................$13.00
02-019…..UHMW Slides, 50”, ‘05-Present, Yamaha, #25 Profile ........$15.50
Wahl Suspensions
02-029…..Super Slippery Slides, Wahl Susp. 1997-Present, 54” ........$48.00
02-022…..Super Slippery Slides, Wahl Susp. 1997-Present, 62 1/2” ..$48.00
Arctic
02-021…..Super Slippery Slides, Arctic, 54”, #10 Profile ....................$42.00
02-020…..Super Slippery Slides, Arctic, 62 1/2”, #10 Profile ..............$42.00
Polaris
02-023…..Super Slippery Slides, Polaris ProX, Fusion, IQ, 121”,
‘02-present, 46” long, #24 Profile ........................................$42.00
02-024…..Super Slippery Slides, Polaris, 54”, #15 Profile ..................$42.00
02-025…..Super Slippery Slides, Polaris Xtra Lite, Edge &
Pre ‘02 RMK, 60 ½”, #23 Profile ..........................................$42.00
02-026…..Super Slippery Slides, Polaris Storm Wide, 54”, #18 ..........$42.00
02-027…..Super Slippery Slides, Polaris ‘02-present RMK, SKS,
Switchback and all IQ, 67” long, #24 Profile ........................$42.00
Ski-Doo
02-028…..Super Slippery Slides, Ski-Doo Wide, 1975-95, 53”, #1......$42.00
02-030…..Super Slippery Slides, New Style, Ski-Doo ‘95 to present,
54”, #21 Profile (7/8” Wide Rail) ..........................................$42.00
02-031…..Super Slippery Slides, Ski-Doo, 49 1/2”, #26 (1” Wide Rail)$42.00
Yamaha
02-036…..Super Slippery Slides, '97-present, V-Max, SX, SRX,
Yamaha, 55”, #20 Profile ......................................................$42.00
HiperFax
This remarkable slide is Teflon like, but has a Graphite strip
dovetailed into it to reduce heat and friction better than anything else on the market. Improved fuel economy and slide
rail life are a sure bet. Sold in pairs, the color is black.
Wahl Suspensions
02-040…..HiperFax, Wahl Suspension ‘97 to present, 56” ..............$189.95
02-042…..HiperFax, Wahl Suspension '97 to present, 66” ................$189.95
Arctic
02-038…..HiperFax, Arctic, 66”, #10 Profile ......................................$179.95
02-039…..HiperFax, Arctic, 56”, #10 Profile ......................................$179.95
Polaris
02-049…..HiperFax, Polaris Edge, Fusion & IQ, 44”, #24 Profile ......$179.95
02-052…..HiperFax, Polaris Xtra Lite, 136”-166”, 2000-present, 69”,
#23 Profile ..........................................................................$179.95
Ski-Doo
02-054…..HiperFax, Ski-Doo '97-present & '96 Mach Z, 136”-159”,
58 1/2", #21 Profile ............................................................$179.95
02-055…..HiperFax, Ski-Doo '97-present, 121”, 43 3/4”, #21............$179.95
02-056…..HiperFax, Ski-Doo '08-present XP Models, 120”, #26 ......$179.95
02-059…..HiperFax, Ski-Doo '08-present XP Models,
137”, 146”, 154”, 163”, #26 ................................................$179.95
Yamaha
02-057…..HiperFax, Yamaha '97-present, 121”, 42 ½”, #20 Profile ..$179.95
02-058…..HiperFax, Yamaha '97-present, 52 1/4”, #20 Profile..........$179.95
8
Wheel Kits & Idler Wheels
Order Line 800-883-0294
Stock Suspension
Wheel Kits
Wear Resistant wheel kits
from Wahl Bros. Racing
offer you the performance
and style that no other wheel kit on the market can. If you
are looking for performance look no further than the Wahl
Bros. 'Wear Resistant' Wheel kits. These wheel kits work on
all stock machines and help reduce wear and friction at high
pressure points. Drilling holes for proper wheel placement is
required.
The stock suspension wheel
kits feature a smaller 2 3/4”
idler wheel, available with one,
two, three or four wheels.
Fasteners are included. Plastic or rubber wheels are available. Plastic for Asphalt and rubber for Grass or Ice. 8 3/4”
shafts will fit Arctic, Wahl and Yamaha applications while the
Polaris and Ski-Doo's will take an 8 5/8” shaft.
2 3/4” Wheel with Spacer
Includes one 2 3/4” idler wheel with spacer and fasteners.
2 3/4” Wheels
02-830A…..2 3/4” Wheel w/Spacer ........................................................$43.95
02-831A…..2 3/4” Single Wheel Kit, Arctic & Yamaha...........................$47.95
02-832A…..2 3/4” Single Wheel Kit, Polaris & Ski-Doo .........................$47.95
02-828A…..2 3/4" Centered Dual Wheel Kit, Arctic & Yamaha .............$87.95
02-829A…..2 3/4" Centered Dual Wheel Kit, Polaris & Ski-Doo ...........$87.95
02-833A…..2 3/4” Dual Wheel Kit, Arctic & Yamaha .............................$87.95
02-834A…..2 3/4” Dual Wheel Kit, Polaris & Ski-Doo ...........................$87.95
02-835A…..2 3/4” Triple Wheel Kit, Arctic & Yamaha ..........................$121.95
02-836A…..2 3/4” Triple Wheel Kit, Polaris & Ski-Doo ........................$121.95
02-837A…..2 3/4” Quad Wheel Kit, Arctic & Yamaha ..........................$165.95
02-838A…..2 3/4” Quad Wheel Kit, Polaris & Ski-Doo ........................$165.95
3 1/4” Wheels
02-840A…..3 1/4” Wheel w/Spacer ........................................................$44.95
02-841A…..3 1/4” Single Wheel Kit, Polaris & Ski-Doo .........................$48.95
02-842A…..3 1/4” Single Wheel Kit, Arctic & Yamaha...........................$48.95
02-849A…..3 1/4" Centered Dual Wheel Kit, Polaris & Ski-Doo ...........$89.95
02-839A…..3 1/4" Centered Dual wheel Kit, Arctic & Yamaha ..............$89.95
02-843A…..3 1/4” Dual Wheel Kit, Polaris & Ski-Doo ...........................$89.95
02-844A…..3 1/4” Dual Wheel Kit, Arctic & Yamaha .............................$89.95
02-845A…..3 1/4” Triple Wheel Kit, Polaris & Ski-Doo ........................$124.95
02-846A…..3 1/4” Triple Wheel Kit, Arctic & Yamaha ..........................$124.95
02-847A…..3 1/4” Quad Wheel Kit, Polaris & Ski-Doo ........................$169.95
02-848A…..3 1/4” Quad Wheel Kit, Arctic & Yamaha ..........................$169.95
02-328A….2 3/4” Wheel with Spacer, Plastic ......................................$21.50
02-703A….2 3/4” Wheel with Spacer, Rubber......................................$21.50
02-329…...Wheel Spacer only, 2 3/4" ....................................................$5.00
Single Wheel Kit
Includes shaft, spacers, fasteners and one 2 3/4” idler wheel.
02-330A..Single
02-704A..Single
02-331A..Single
02-705A..Single
Wheel
Wheel
Wheel
Wheel
Kit, Arctic, Wahl & Yamaha, Plastic ................$31.50
Kit, Arctic, Wahl & Yamaha, Rubber ..............$31.50
Kit, Polaris & Ski-Doo, Plastic ........................$31.50
Kit, Polaris & Ski-Doo, Rubber ......................$31.50
Dual Wheel Kit
Includes shaft, spacers, fasteners and two 2 3/4” idler
wheels.
02-332A..Dual
02-706A..Dual
02-333A..Dual
02-707A..Dual
Wheel
Wheel
Wheel
Wheel
Kit, Arctic, Wahl & Yamaha, Plastic ..................$43.00
Kit, Arctic, Wahl & Yamaha, Rubber ................$43.00
Kit, Polaris & Ski-Doo, Plastic ..........................$43.00
Kit, Polaris & Ski-Doo, Rubber..........................$43.00
Centered Dual Wheel Kit
Includes shaft, spacers, fasteners and two 2 3/4” idler wheels
centered on shaft.
Arctic & Polaris Wheel w/Block
Assemblies
The Arctic Cat kit has a 2 3/4” Wear
Resistant wheel with a precision machined
billet block and is available for the older and
newer Arctic Cat Suspensions. The new
Firecats will use the shorter block on the outside of the suspension while using the longer block on the
inside. Polaris sleds will use the 3 1/4” wheel with the long
block on the inside and outside of the suspension. All block
kits come with mounting hardware.
02-334A..Centered
02-708A..Centered
02-335A..Centered
02-709A..Centered
Dual
Dual
Dual
Dual
Wheel
Wheel
Wheel
Wheel
Kit, Arctic, Wahl & Yamaha, Plastic...$43.00
Kit, Arctic, Wahl & Yamaha, Rubber..$43.00
Kit, Polaris & Ski-Doo, Plastic ..........$43.00
Kit, Polaris & Ski-Doo, Rubber..........$43.00
Triple Wheel Kit
Includes shaft, spacers, fasteners and three 2 3/4” idler
wheels.
02-336A..Triple
02-710A..Triple
02-337A..Triple
02-711A ..Triple
Arctic
02-851A…..2 3/4” Wear Resistant Wheel w/Block, Inner Arctic
(long block) ..........................................................................$58.95
02-850A…..2 3/4” Wear Resistant Wheel w/Block, Outer Arctic
(short block) ........................................................................$58.95
Polaris
02-853A…..3 1/4” Wear Resistant Wheel w/Block, Polaris
(long block) ..........................................................................$59.95
Wheel
Wheel
Wheel
Wheel
Kit, Arctic, Wahl & Yamaha, Plastic ................$57.50
Kit, Arctic, Wahl & Yamaha, Rubber ..............$57.50
Kit, Polaris & Ski-Doo, Plastic ........................$57.50
Kit, Polaris & Ski-Doo, Rubber ........................$57.50
Quad Wheel Kit
Includes shaft, spacers, fasteners and four 2 3/4” idler
wheels.
02-338A.....Quad
02-712A.....Quad
02-339A.....Quad
02-713A.....Quad
Blocks Only
02-259…..Lightweight Aluminum Wheel Block, (Short), 1.380” ..........$22.25
02-258…..Lightweight Aluminum Wheel block, (Long), 1.700” ............$22.25
Wheel
Wheel
Wheel
Wheel
Kit, Arctic, Wahl & Yamaha, Plastic ............$71.00
Kit, Arctic, Wahl & Yamaha, Rubber ............$71.00
Kit, Polaris & Ski-Doo, Plastic ......................$71.00
Kit, Polaris & Ski-Doo, Rubber......................$71.00
Replacement Cross Shafts
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4”, Arctic, Wahl & Yamaha,
(machined)............................................................................$10.75
02-241…..Aluminum Cross Shaft, 5/8” x 8 5/8”, Polaris & Ski-Doo,
(machined)............................................................................$10.75
9
WHEEL KITS & IDLER WHEELS
Wear Resistant
Wheel Kits
WHEEL KITS & IDLER WHEELS
Wheel Kits & Idler Wheels
Order Line 800-883-0294
Anti-Stab Wheel Kits
Asphalt Wheel Kits
Stab wheel kits help to prevent
track spearing by preventing the
track from coming into contact with the tips of the suspension
rails. These wheel kits can replace the stock limiter strap
mount. You need to know if you have a centered or off-centered limiter straps. The two styles include all of the necessary hardware needed to mount the wheel kit to the tips of
your rails, which includes four 2 3/4” rubber wheels, shaft,
spacers and bolts. Highly recommended when removing the
stock plastic rail tips. Remember to use thread lock.
Plastic Wheel kits with 8 3/4" cross
shaft lengths. These kits will work on
the original Wahl asphalt suspensions. They also work on stock Arctic
and Yamaha suspensions that require a wheel bigger than 2
3/4". Face of wheel is .570”
Single Wheel with Spacer
Includes one 3 1/4” Plastic wheel w/spacer and fasteners.
02-270A…..Single Wheel w/Spacer......................................................$21.50
02-271…....Wheel Spacer Only ..............................................................$5.00
02-272A…..Single Wheel Kit, Centered, 8 3/4” Shaft ..........................$33.50
Dual Wheel Kit
Includes 8 3/4” shaft, spacers, fasteners and two 3 1/4” wheels.
02-274A…..Dual Wheel Kit ..................................................................$48.00
Centered Dual Wheel Kit
Includes 8 3/4” shaft, spacers, fasteners and two 3 1/4” wheels centered on
the shaft.
02-275A…..Centered Dual Wheel Kit ..................................................$48.00
Triple Wheel Kit
Includes 8 3/4” shaft, spacers, fasteners and three 3 1/4” wheels.
02-276A...... Triple Wheel Kit................................................................$64.50
Quad Wheel Kit
Includes 8 3/4” shaft, spacers, fasteners and four 3 1/4” wheels.
02-278A…...Quad Wheel Kit ................................................................$81.00
Replacement Shaft
02-238….....Aluminum Cross Shaft, 5/8” x 8 3/4" ................................$10.75
Replacement Wheels
02-373….....Plastic Replacement Wheel, 3 1/4”, ea. ..........................$15.95
Centered Limiter Strap Applications:
02-790A… Arctic Cat & Yamaha Split Stab Wheel Kit, 8 3/4" Shaft ....$94.95
02-792A… Polaris & Ski-Doo Split Stab Wheel Kit, 8 5/8" Shaft..........$94.95
Dual Limiter Strap Applications:
02-791A….Arctic Cat & Yamaha Centered Stab Wheel Kit,
8 3/4" Shaft ........................................................................$94.95
02-793A….Polaris & Ski-Doo Centered Stab Wheel Kit,
8 5/8" Shaft ........................................................................$94.95
Lightweight 3 1/4”
Rubber and Plastic
Wheel kits
These lightweight plastic and rubber wheel kits are only available from Wahl Brothers. Found in the newest Wahl suspensions, if you are looking to add or alter your suspension,
these wheels are less than half the weight of the older version wheels. Genuine PPD, they are available for all models.
Plastic & Rubber Idler Wheels
Manufactured to OEM specifications, these PPD idler wheels
are of the best quality available. The 2 3/4”, 3 1/4” and 4 1/4”
lightweight idlers have a 5/8” I.D., 6202 bearing and all others have the 25mm I.D., 6205 bearing. Wheels from 3 1/4”
thru 5.630” have 5/8” I.D. plastic inserts,
while the 6 3/8” thru 8” wheels have 3/4”
I.D. plastic inserts. Those without inserts
are specified. The 2 3/4” and 3 1/4” solid
plastic wheels are recommended for use
where they do not run over studs and the
wheels with rubber are for studded and cleated tracks.
3 1/4” Lightweight Wheel with Spacer
02-290A…..3 1/4” LW Wheel w/Spacer, Plastic....................................$23.00
02-291A…..3 1/4” LW Wheel w/Spacer, Rubber ..................................$23.00
02-329…....Wheel Spacer Only, 2 3/4” & 3 1/4” Wheels ......................$5.00
Single 3 1/4” Lighweight Wheel Kit
02-292A…..Single 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Plastic ......$35.75
02-293A…..Single 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Rubber ....$35.75
02-294A…..Single 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Plastic ..........$35.75
02-295A…..Single 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Rubber ........$35.75
Dual 3 1/4” Lightweight Wheel Kit
02-296A…..Dual 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Plastic ........$49.95
02-297A…..Dual 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Rubber ......$49.95
02-298A…..Dual 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Plastic ............$49.95
02-299A…..Dual 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Rubber ............$49.95
Centered Dual 3 1/4” Lightweight Wheel Kit
02-300A…..Centered Dual LW Wheel Kit, AC, Wahl & Yamaha, Plastic ..$49.95
02-301A…..Centered Dual LW Wheel Kit, AC, Wahl & Yamaha, Rubber..$49.95
02-302A…..Centered Dual LW Wheel Kit, Polaris & Ski-Doo, Plastic........$49.95
02-303A…..Centered Dual LW Wheel Kit, Polaris & Ski-Doo, Rubber ......$49.95
Triple 3 1/4” Lightweight Wheel Kit
02-304A…..Triple 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Plastic ......$64.95
02-305A…..Triple 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Rubber......$64.95
02-306A…..Triple 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Plastic............$64.95
02-307A…..Triple 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Rubber ..........$64.95
Quad 3 1/4” Lightweight Wheel Kit
02-308A…..Quad 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Plastic ......$79.95
02-309A…..Quad 3 1/4” LW Wheel Kit, AC, Wahl & Yamaha, Rubber......$79.95
02-310A…..Quad 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Plastic............$79.95
02-311A…..Quad 3 1/4” LW Wheel Kit, Polaris & Ski-Doo, Rubber ..........$79.95
Replacement Shafts
02-238…..Aluminum Cross Shaft, 5/8” x 8 3/4”, AC, Wahl & Yamaha
(machined)....................................................................................$10.75
02-241…..Aluminum Cross Shaft, 5/8” x 8 5/8”, Polaris & Ski-Doo
(machined) ..................................................................................$10.75
Replacement Wheels
02-383…..3 1/4" Replacement Lightweight Wheel, Rubber........................$16.95
02-384…..3 1/4" Replacement Lightweight Wheel, Plastic ........................$16.95
Plastic Idlers
02-370…..Idler Wheel, 2 3/4”, Plastic, 5/8” ID......................................$13.95
02-373…..Idler Wheel, 3 1/4”, Plastic, 5/8” ID......................................$15.95
02-384…..Idler Wheel, 3 1/4'', Plastic, 5/8” ID, Lightweight ................$16.95
02-375…..Idler Wheel, 5”, Plastic, 5/8” ID, Lightweight ......................$17.95
02-381A...Idler Wheel, 8.5”, Plastic w/Spokes,
6205 Bearing (w/o inserts) ..................................................$45.00
02-377…..Idler Wheel, 9”, Plastic w/Spokes,
6205 Bearing (w/o inserts) ..................................................$40.00
Rubber Idlers
02-371…..Idler Wheel, 2 3/4”, Rubber, 5/8” ID ....................................$13.95
02-372…..Idler Wheel, 3 1/4”, Rubber, 5/8” ID ....................................$15.95
02-383…..Idler Wheel, 3 1/4", Rubber, 5/8” ID, Lightweight ................$16.95
02-374…..Idler Wheel, 4 1/4", 5/8” ID ..................................................$15.95
02-385…..Idler Wheel, 4 1/2", 5/8” ID ..........$17.95
02-376…..Idler Wheel, 5”, 5/8” ID ................$17.95
02-378…..Idler Wheel, 5.350”, 5/8” ID ..........$18.95
02-379…..Idler Wheel, 5.630”, 5/8” ID ..........$18.95
02-380…..Idler Wheel, 6 3/8”, 3/4" ID ..........$19.95
02-382…..Idler Wheel, 7 1/8”, 3/4” ID ..........$21.95
02-386…..Idler Wheel, 7 5/8”, 3/4” ID ..................................................$28.95
02-387…..Idler Wheel, 8”, 3/4" ID, Lightweight ....................................$29.95
02-388…..Idler Wheel, 8”, 3/4” ID ........................................................$28.95
02-389…..Idler Wheel, 9”, 3/4” ID ........................................................$44.95
10
Wheel Kits & Idler Wheels
Order Line 800-883-0294
Lightweight Idler Wheels
Billet Aluminum Idlers
Performance products that efficiently and
effectively lower weight and rotating mass are
becoming a main stream idea as far as competition is concerned. Wahl Bros. knows this,
and we have devised one more way to help decrease weight
and rotating mass. Sold individually, these lightweight idler
wheels are 1/3 less the weight of the originals. 02-383 & 02384 come standard with 6202 bearing.
Aluminum idlers are complete with
the bearing, snap ring and aluminum
inserts. The 2 3/4” and 3 1/4” idlers
come complete with a 5/8” ID bearing and snap ring. Use billet wheels
for applications where track obstructions are minimal to prolong the life
of the wheels and your track.
3 1/4'' Idler Wheel, Rubber, 5/8” ID ................$16.95
3 1/4'' Idler Wheel, Plastic, 5/8” ID ..................$16.95
5” Idler Wheel, Plastic, 5/8” ID..........................$17.95
8” Idler Wheel, Rubber, 3/4” ID ........................$29.95
02-404A…..Idler Wheel, 2 3/4" Aluminum, 5/8'' ID ..............................$38.00
02-405A…..Idler Wheel, 3 1/4'' Aluminum, 5/8'' ID ..............................$41.50
02-408A…..Idler Wheel, 5'' Aluminum, 3/4'' ID ....................................$51.95
02-409A…..Idler Wheel, 5.125'' Aluminum with .800'' ID Inserts..........$61.95
02-411A…..Idler Wheel, 5.360'', Aluminum with 5/8'' Inserts................$59.95
02-415A…..Idler Wheel, 6.375'', Aluminum, 20mm ID ........................$55.95
02-416A…..Idler Wheel, 6.400'', Aluminum, 5/8'' ID ............................$76.95
Wahl Bros. Wear Resistant
Aluminum Wheels
Want billet wheels that shine? How
about billet wheels that can take the
abuse that boondocking can inflict?
Wahl Brothers billet, Wear Resistant
wheels are the only billet wheels on
the market that can take what racers and aggressive trail riders alike inflict. These 'Wear Resistant Aluminum Wheels'
have rubber molded onto the aluminum wheel that protects
the billet from studs and ice. A hefty durometer rubber combined with an adhesive so strong, the rubber will wear before
the adhesive lets loose. This allows these wheels to be run
on the studs at high mph without any wheel damage or performance hindrance. All wheels come with bearing, circlip
and billet inserts where applicable. Sold Individually.
Spoked Aluminum Idlers
02-417A….Spoked Idler Wheel, 8'',
3/4” Inserts ......................................$89.95
02-420A….Spoked Idler Wheel, 9'',
3/4” Inserts ....................................$129.95
'Sure Stick' Rear Idler
Wheels
Want to make one heck of a foot
print on the Asphalt track? These
latest Billet idler wheels cover 7.5”
of your track. They are standard
equipment on the 2008 Wahl asphalt suspension and can
easily be adapted to work on the '02 Asphalt suspension with
black rails. Sold individually or in kit form, you will need two
outside grooved wheels and one center wheel. Complete with
bearings.
02-690A….Idler Wheel, 2.750” Aluminum, 5/8” ID, Rubber ................$41.95
02-691A….Idler Wheel, 3.250” Aluminum, 5/8” ID, Rubber ................$42.95
02-693A.....Idler Wheel, 5.360” Aluminum, 5/8” Insert, Rubber,
(Polaris/Arctic) ....................................................................$89.95
02-694A.....Idler Wheel, 5.600” Aluminum, 5/8” ID Insert, Rubber,
(Polaris/Arctic) ....................................................................$89.95
02-692A.....Idler Wheel, 5.600” Aluminum, 20mm ID, Rubber
(Firecat, Ski-Doo)................................................................$79.95
02-695A.....Idler Wheel, 6.400” Aluminum, 20 mm ID, Rubber,
(Polaris Rear) ....................................................................$85.95
02-696A.....Idler Wheel, 6.400” Aluminum, 5/8” ID Insert, Rubber,
(Arctic/Ski-Doo Rear)..........................................................$91.95
02-700A.....Idler Wheel, 6.400” Aluminum, 3/4” ID Inserts, Rubber, ea.$91.95
02-698A.....Idler Wheel, 7.125” Aluminum, 3/4” ID, Rubber,
(Arctic & Ski-Doo REV) ..................................................$124.95
02-697A.....Idler Wheel, 7.125” Aluminum, 20mm ID,Rubber,
Ski-Doo ............................................................................$124.95
02-699A.....Idler Wheel, 8” Aluminum, 3/4” ID, Rubber ......................$129.95
02-689A.....Idler Wheel, 8” Aluminum, 20mm ID, Rubber ..................$129.95
Sure Stick Rear Idler Kit
02-449A…Aluminum Rear 8'' Asphalt Wheel Kit (contains one
center & two grooved outer idler wheels)..........................$495.00
Sure Stick Rear Idlers
02-457A…Grooved 8" Billet Idler Wheel, Asphalt, ea. ......................$169.95
02-458A…Center 8" Billet Idler Wheel, Asphalt, ea. ..........................$169.95
Replacement Components
02-392…..NTN 25mm ID Bearing, OEM 6205, ea. ................................$8.65
02-400…..Bearing Circlip, 6205, ea. ......................................................$1.20
Polaris Wheel Kits
NTN Idler Wheel Bearings
Genuine Polaris wheel kits decrease
friction and hyfax wear. Wheel kit 02342 fits all early ITS suspensions and
can be installed in any location. Kit
includes two idlers, two blocks, spacers
and fasteners.
NTN has engineered integral features into every snowmobile
bearing to produce unequaled performance and longevity.
The Formula bearing by NTN has optimum fill, special low
temperature grease. These are the best bearings for the
cold, abusive climate of snowmobiles.
02-390…..NTN
02-391…..NTN
02-395…..NTN
02-397…..NTN
02-392…..NTN
02-394…..NTN
02-403…..NTN
5/8” ID Bearing, OEM 6202 ..........................................$7.85
20mm ID Bearing, OEM 6004 ......................................$9.35
20mm ID Bearing, OEM 6204 ......................................$8.25
20mm ID Bearing, 52mm OD, OEM 6304LLU ............$11.55
25mm ID Bearing, OEM 6205 ......................................$8.65
1” ID Bearing, OEM 6205/1, Larger ID ........................$9.35
25mm ID Bearing, OEM 6205 (Import) ........................$5.45
02-342…..Polaris Wheel Kit, Earlier Polaris ........................................$49.00
02-341…..Polaris Wheel Kit, Edge, M10, Xtra Lite, Red......................$59.95
11
WHEEL KITS & IDLER WHEELS
02-383…..Lightweight
02-384…..Lightweight
02-375…..Lightweight
02-387…..Lightweight
WHEEL KITS, IDLERS/TRACKS
Wheel Kits & Idler Wheels/Racing Tracks & Clips
Order Line 800-883-0294
Idler Wheel Inserts &
Circlips
Track Carrier
Wheel Kit
Replacement insert sets and circlips. Insert sets include an inner
and an outer insert and are available in plastic and aluminum. Bearing Circlips are sold individually.
This Wheel Kit bolts into
tunnel in order to eliminate unwanted track slap. Kit mounts
between the suspension and track allowing the wheel kit to
pick up on the track and deflect it away from the suspension.
Be sure that you mount it high enough to keep suspension
from bottoming out into it. Kit includes shaft with spacers, two
2 3/4” idlers and fasteners. Kits are available in six lengths.
Custom lengths available upon request.
Plastic Inserts
02-396.....Plastic Insert Set, 5/8” ID........................................................$1.95
02-398.....Plastic Insert Set, 3/4” ID........................................................$1.95
Aluminum Inserts
11-516.....Aluminum Insert Set, 5/8” ID ................................................$13.50
11-518.....Aluminum Insert Set, 3/4” ID ................................................$13.50
11-519.....Aluminum Idler Insert Set .800” (20mm) ..............................$13.50
Bearing Circlips
02-399.....Bearing Circlip, 6202, ea. ........................................................$.95
02-400.....Bearing Circlip, 6205, ea. ......................................................$1.20
02-401.....Bearing Circlip, 6004, ea. ........................................................$.95
02-402.....Bearing Circlip, 6204, ea. ......................................................$1.20
02-361A.....Track Carrier Kit, Arctic Firecat, 13 3/4" ............................$47.00
02-363A.....Track Carrier Kit, Polaris, Ski-Doo DSA,
ZX & REV 16 1/4” ..............................................................$47.00
02-364A.....Track Carrier Kit, 1997-Present Yamaha, 16 1/2”..............$47.00
02-365A.....Track Carrier Kit, Newer Arctic's, 16 3/4" ..........................$47.00
02-366A.....Track Carrier Kit, Yamaha Telescopic Strut, 17 1/4" ..........$47.00
02-367A.....Track Carrier Kit, Ski-Doo, PRS, 17 1/2" ..........................$47.00
02-368A.....Track Carrier Kit, Custom Length ......................................$55.00
Narrow Axle Conversion
This kit includes a shorter rear axle and
all the spacers to accommodate the 13
1/2”, 14” & 15” tracks on a Wahl Rubber
Track Suspension. Available for three or four rear idlers.
Aluminum Bearing Cover
Aluminum bearing covers to shield the bearing seals and add
to the appearance of your machine. Available for 6202 and
6004 bearings. Hole size is 5/16” but can be drilled for larger
fasteners. Sold as a pair.
02-254A....Narrow Axle Kit, 3 Wheel ....................................................$45.00
02-255A....Narrow Axle Kit, 4 Wheel ....................................................$45.00
Polaris Rear Axle
Adjuster Bushings
02-441A...Aluminum Bearing Cover, 1.150'' OD, .313'' ID, pr.
(for 6202 bearing) ................................................................$9.95
02-445A...Aluminum Bearing Cover, 1.30'' OD, .313'' ID, pr.
(for 6004 bearing) ................................................................$9.95
Machined billet aluminum adjuster
bushings that replace the plastic ones
that come as original hardware.
Racing Tracks
& Clips
02-211…..Polaris Rear Axle Adjuster Bushing, Aluminum, ea. ............$24.95
Arctic Rear Axle Adjuster Bushings
CNC machined from billet aluminum, these adjuster bushings are
available for your pre-'96 Arctic's
and the '97 & newer models that
have the original one piece rail. Sold
as a set.
Camoplast Open
Window Drag Racing
Tracks
11-500…..Rear Axle Adjuster Bushing, Pre-1996 Arctic ......................$34.00
11-502…..Rear Axle Adjuster Bushing, 1997 & Newer ETT Arctic's ....$34.00
The Predator racing track is the
strongest and fastest out there.
They are available in 13.5”, 14” & the standard 15” widths.
Lengths are 121”, 128”, and 136” & 144”. Track pitch is 2.52”.
All windows are open with clips that have no guide. Can be
used for Ice or Grass drag racing.
5.350” Rubber Susp.
Wheel Kits
For the older style Wahl rubber
track suspensions that used a
5.350” OD wheel. These wheel kits
can be incorporated into stock suspensions as well.
Single Wheel with Spacer
02-264A...5.350” Wheel w/ Spacer & Fastener ....................................$22.00
02-271…..Wheel Spacer only ................................................................$5.00
Single Wheel with Block
02-266A...5.350” Wheel w/Block & Fastener........................................$29.00
Dual Wheel Kit
02-269A...5.350” Dual Wheel Kit w/Spacers & Fasteners....................$49.50
Replacement Wheel
02-378…..5.350” Rubber Idler Wheel ..................................................$18.95
121” Camoplast Drag Racing Tracks (1 1/2” Clip)
02-600…..15” x 121” x .525” Lug Height, OEM 9811R, 33 lbs. ........$595.00
02-616…..15” x 121” x .725” Lug Height, OEM 9843R, 36 lbs. ........$525.00
128” Camoplast Drag Racing Tracks (1” Clip)
02-603…..13.5” x 128” x .525” Lug Height, OEM 9902R, 31 lbs. ......$730.00
136” Camoplast Drag Racing Tracks (1” Clip)
02-601…..15” x 136” x .525” Lug Height, OEM 9862R, 38 lbs. ........$685.00
02-684…..13.5” x 136” x .525” Lug Height, OEM 9937R, 34 lbs. ......$835.00
144” Camoplast Drag Racing Tracks (1” Clip)
02-682…..13.5" x 144” x .525 lug Lug Height, OEM 9084R 36 lbs. ..$885.00
12
Racing Tracks & Clips
Order Line 800-883-0294
Camoplast Grass Tracks
Anti-Wear Pads
The only track designed specifically for
grass drag racing. Having no clips or
windows, they must be used with
wheeled suspensions only. This is the
lightest 2.52” Pitch track available.
Anti-wear pads by SLP reduce drag and
wear on the track and hyfax. Designed
for use on tracks that do not have windows or wear clips on each cross bar.
Each pack contains forty pads, washers and nuts.
.525” Low Lug Track, 15” Wide
02-598.....Camoplast Grass Track, 121”, OEM 9810R, 30 lbs...........$535.00
02-665…..Track Anti-Wear Pads, 40 pcs. ............................................$34.00
Camoplast Speed Run Track
.525” Low Lug Track, 13 1/2” Wide
02-683.....Camoplast Grass Track, 136”, OEM 9929R, 32 lbs...........$810.00
02-681.....Camoplast Grass Track, 144”, OEM 9976R, 33.5 lbs. ......$845.00
Approved for high speeds, this 121” track
is a .250” thick belt with a smooth outer
surface. The track pitch is 2.52”.
Available in 12” or 15” widths. Stainless
steel wear plates are needed for your
slides to ride on and help maintain the
track integrity at high speeds. They are
installed using .875” push through studs. We recommend
using 192 plates. You should put one plate on the inside and
one on the outside of the track which will allow you to run 4
studs per bar. The 15” track weighs only 17 lbs.
Camoplast Oval Racing Tracks
From the hole-shot to the back stretch,
Camoplast has built a winning track for
you. Available in two lengths, 116” and
121” with a lug height of .725”, there is
a track to fit your needs. Tracks are
2.52” pitch.
02-670...Camoplast Speed Run Track, 15” x 121”, 2.52” Pitch..........$745.00
02-641...Camoplast Speed Run Track, 12'' x 121'', 2.52'' Pitch ........$835.00
02-672...Stainless Steel Wear Plate ......................................................$2.65
Camoplast Track Clips
Camoplast track clips directly replace the
original clips on you're Camoplast track or
other aftermarket track. Sold individually.
10 5/8” Asphalt Track
This is the newest asphalt track from
Camoplast. Designed for durability and
less rotating mass, this track looks to
be the best ticket for asphalt racers.
Suspension adjustments will have to
be made on standard suspensions to accommodate the narrow
width. Available in three lengths, Wahl Bros. has you covered.
1” Wide
02-650…..Track
02-655…..Track
02-651…..Track
02-653…..Track
02-657…..Track
02-659…..Track
1 1/2” Wide
02-652…..Track
02-654…..Track
02-656…..Track
02-605…..Asphalt Racing Track, 121", 9895R, 33 lbs. ......................$705.00
02-607…..Asphalt Racing Track, 128", 9896R, 35 lbs. ......................$720.00
02-609…..Asphalt Racing Track, 136", 9897R, 37 lbs. ......................$740.00
Asphalt Drag Track
Clip, 1 1/2” Wide, .725” Guide ....................................$2.40
Clip, 1 1/2” Wide, .937” Guide ....................................$2.40
Clip, 1 1/2” Wide, w/o Guide ......................................$1.45
Camoplast Track Tool
This is the asphalt track from
Camoplast that started it all. Track
width is 15” and pitch is 2.52”, accepting standard OEM drive wheels.
Available in a two-piece construction that allows
use without track or suspension removal. The bolt
type tool is machined from hardened steel. It will fit
the 1” clips and the 1 1/2” clips with the supplied
inserts. Used to install track clips.
02-612…..121” Camoplast Asphalt Track, OEM 9802R, 50 lbs. ........$675.00
Bolt Type
02-662…..Track Clip Tool, Bolt Type ....................................................$92.95
106” Rubber Track
A 15” x 106” rubber track offered only by Soucy. The same
track used by many of the Pro Champ racers. Lug height is
.625”. Track clips are not installed, order separately.
02-596..…Soucy Track, 15'' x 106'' ..................................................$1000.00
Track Clips
02-652.....Track Clip, .725'' Guide, 1 1/2'' Wide......................................$2.40
02-654.....Track Clip, .937'' Guide, 1 1/2'' Wide......................................$2.40
Clip, 1” Wide, w/o Guide, Ribbed ................................$1.05
Clip, 1” Wide, w/o Guide, Smooth ..............................$1.05
Clip, 1” Wide, .725” Guide ..........................................$1.75
Clip, 1” Wide, .937” Guide ..........................................$2.25
Clip, 1” Wide, .937” Guide, Ribbed ..............................$1.75
Clip w/Holes, 1'' Wide, .625'' Guide (lightweight) ........$1.15
Replacement Parts
02-663…..Track Clip Tool Insert, 1” ......................................................$21.95
02-666…..Track Clip Tool Insert, 1 1/2”................................................$30.50
02-667…..Guide Bolt, Track Clip Tool ....................................................$4.50
13
RACING TRACKS& CLIPS
116” Tracks
02-674…..Camoplast 13.5'' x 116'' x .725'' Alternating Lug Track,
OEM 9982R, 28 lbs. ..........................................................$810.00
02-673…..Camoplast 15'' x 116'' x .725'' Alternating Lug Track,
OEM 9995R, 31 lbs. ..........................................................$720.00
121” Tracks
02-677…..Camoplast Track, 14'' x 121'' x .725'',
OEM 9927R, 34 lbs. ..........................................................$785.00
02-621…..Camoplast Track, 15” x 121” x .725”,
OEM 9997R, 37 lbs. ..........................................................$735.00
Racing Tracks & Clips/Drive Sprockets
Order Line 800-883-0294
Drive Sprockets
Cleated Tracks,
3.29” Pitch
2.52” No-Slip Drive
SprocketsTM
Wahl Bros. Racing has been a source for
high performance track systems since
1981. They are Kevlar reinforced, allowing lightweight and maximum strength.
Rail center is 7 1/2". A four stud per cleat
pattern is left open for convenient studding. Rivet holes are
1/4”. Track width is 15”. This is a Convolute drive system,
meaning they are driven off of the cleats resulting in free
wheeling, ultra fast acceleration. Guides ordered separately.
Patented No Slip Drive Sprockets from
Wahl Bros. Racing. Designed specifically to prevent ratcheting and for less rotating mass, the No-Slip
Sprockets drive off of four track lugs and track windows at once with
one pair. Eliminate those extra involutes with these drive wheels. If
rail tips need to be shortened for clearance, an anti-stab wheel kit is
recommended to prevent spearing. Not intented for closed window
tracks.Sold individually.
Tracks
02-440A…102” Cleated Track, 43-7496, 31 Cleats, 21 lbs................$725.00
02-442A…112” Cleated Track, 43-6906, 34 Cleats, 23 lbs ................$725.00
02-444A…118” Cleated Track, 43-6907, 36 Cleats, 25 lbs ................$725.00
02-446A…121” Cleated Track, 43-6908, 37 Cleats, 26 lbs................$725.00
02-448A…132” Cleated Track, 43-9580, 40 Cleats, 28 lbs................$775.00
7T Sprockets (Approx. Diameter 5.50”)
02-555…..No Slip 2.52” Pitch Drive Sprocket, 7T, 1” Hex....................$76.95
02-557…..No Slip 2.52” Pitch Drive Sprocket, 7T, 1 1/16”-1 1/8” Hex $76.95
02-559…..No Slip 2.52” Pitch Drive Sprocket, 7T, 1 1/4” Hex..............$76.95
8T Sprockets (Approx. Diameter 6.25”)
02-575…..No Slip 2.52” Pitch Drive Sprocket, 8T, 1” Hex....................$76.95
02-576…..No Slip 2.52” Pitch Drive Sprocket, 8T, 1 1/16”-1 1/8” Hex $76.95
02-577…..No Slip 2.52” Pitch Drive Sprocket, 8T, 1 1/4” Hex ............$76.95
9T Sprockets (Approx. Diameter 7.05”)
02-578…..No Slip 2.52” Pitch Drive Sprocket, 9T, 1” Hex....................$81.95
02-579…..No Slip 2.52” Pitch Drive Sprocket, 9T, 1 1/16”-1 1/8” Hex $81.95
02-580.....No Slip 2.52” Pitch Drive Sprocket, 9T, 1 1/16”-1 1/8” Hex,
Yamaha RX-1 (machined) ....................................................$81.95
02-574…..No Slip 2.52” Pitch Drive Sprocket, 9T, 1 1/8”-30mm Hex,
09 Yamaha Apex, Vecture, Venture, 121” & 136”................$81.95
02-581…..No Slip 2.52” Pitch Drive Sprocket, 9T, 1 1/4” Hex ............$81.95
10T Sprockets (Approx. Diameter 7.85”)
02-582…..No Slip 2.52” Pitch Drive Sprocket, 10T, 1” Hex..................$91.95
02-583…..No Slip 2.52” Pitch Drive Sprocket, 10T, 1 1/16”-1 1/8” Hex $91.95
02-585…..No Slip 2.52” Pitch Drive Sprocket, 10T, 1 1/4” Hex............$91.95
TRACKS, CLIPS/DRIVE SPROCKETS
Replacement Cleats
02-450…..Sno Pro Cleat, Staggered Hole Pattern,
(Used on Wahl Tracks), .050” Thick ......................................$4.95
02-452…..Arctic “Z” Cleat, Straight Hole Pattern, .050” Thick ..............$4.95
Rivets
02-454…..1/4” Solid Aluminum Track Rivet, 50 pc ................................$9.00
02-455…..1/4” Solid Aluminum Track Rivet, 100 pc ............................$18.00
Guides (For Oval racing applications.)
02-456…..Large Butterfly Style Track Guide, ea. ................................$18.00
Tools
02-460A...Track Rivet Tool with Bit ..............$95.00
02-462…..Tool Bit Only, ea. ..........................$28.00
2.86” No-Slip Drive SprocketsTM
The latest pitch from the OEM's. Be sure to use Anti-Stab
wheel kits with these sprockets if rail tip modifications are
needed. Sold individually.
STUD LENGTH CHART
.525” Track Lug Height
.700” Stud w/Woody’s Stud Plate
Oval
1.060” Stud w/Woody’s Stud Plate
Drag
.800” Hooker Stud w/Flat Plate
Drag
.900” Hooker Stud w/Angled Plate
Drag
7 Tooth (Approx. Diameter 6.25”)
02-567…..No-Slip 2.86'' Pitch Drive Sprocket ,7T, 1'' Hex ..................$81.95
02-568…..No-Slip 2.86” Pitch Drive Sprocket, 7T, 1 1/16”-1 1/8” Hex $81.95
02-569…..No-Slip 2.86” Pitch Drive Sprocket, 7T, 1 1/4” Hex..............$81.95
8 Tooth (Approx. Diameter 7.125”)
02-592…..No-Slip 2.86'' Pitch Drive Sprocket ,8T, 1'' Hex ..................$91.95
02-593…..No-Slip 2.86” Pitch Drive Sprocket, 8T, 1 1/16”-1 1/8” Hex $91.95
02-595…..No-Slip 2.86” Pitch Drive Sprocket, 8T, 1 1/4” Hex..............$91.95
.820” Stud w/Flat Wahl Stud Plate
Oval
3.0” No-Slip Drive SprocketsTM
.575” Hooker Stud w/Flat Plate
Oval
.625” Track Lug Height
The same patented No-Slip technology developed by Wahl
Bros has been transformed to run the latest 3.0 pitch track
option. If you want to harness your power to the track, eliminate ratcheting, then you need to put these on your sled. Be
sure to use Anti-Stab wheel kits with these sprockets if rail tip
modifications are needed.
.725” Track Lug Height
.820” Stud w/Woody’s Stud Plate
Oval
.920” Stud w/Flat Wahl Stud Plate
Oval
.675” Hooker Stud w/Flat Plate
Oval
7 Tooth (Approx. Diameter 6.55”)
02-586.....No-Slip 3.0” Pitch Drive Sprocket,
02-587.....No-Slip 3.0” Pitch Drive Sprocket,
02-588.....No-Slip 3.0” Pitch Drive Sprocket,
8 Tooth (Approx. Diameter 7.50”)
02-589.....No-Slip 3.0” Pitch Drive Sprocket,
02-590.....No-Slip 3.0” Pitch Drive Sprocket,
02-591.....No-Slip 3.0” Pitch Drive Sprocket,
Oval = 3/8” Above Track Lug
Drag = 3/4” Above Track Lug
14
7T, 1” Hex ......................$81.95
7T, 1 1/16”-1 1/8” Hex....$81.95
7T, 1 1/4” Hex ................$81.95
8T, 1” Hex ......................$91.95
8T, 1 1/16”-1 1/8” Hex....$91.95
8T, 1 1/4” Hex ................$91.95
Drive Sprockets
Order Line 800-883-0294
Polaris Splined No-Slip
Drive SprocketsTM
3.0” Pitch Polaris Splined
Sprocket
New are No-Slip Drive Sprockets for the
splined drive shafts found on many of the
2006 to present Polaris machines. Available
for three different track pitches. Sold individually.
An 8 tooth, 3.0” pitch, full involute drive
sprocket for the Polaris Splined shaft that is
found on most 2006 to present Polaris sleds,
as well as the '05 900's. Genuine PPD drive sprockets.
Diameter is 7 1/2”. Sold individually.
02-553…..No-Slip 2.52'' Pitch Splined Drive Sprocket, 9T ..................$91.95
02-551…..No-Slip 2.86'' Pitch Splined Drive Sprocket, 8T ..................$91.95
02-548…..No-Slip 3.0'' Pitch Splined Drive Sprocket, 8T ....................$91.95
02-594…..8 Tooth Splined Involute Drive Wheel, 3.00'' Pitch, ea. ......$69.95
Ski-Doo Splined No-Slip Drive
SprocketsTM
Anti Ratchet Sprockets
These sprockets press onto the drive
axle between the original drivers. They
are available for use with standard 9T
wheels and the smaller 8T wheels. They
are especially helpful with long tracks,
long travel suspensions and high H.P.
machines. They drive off the track clips eliminating ratcheting. In some cases rail tips must be shortened to avoid contact with the external portion of the driver. Sold individually.
Another new sprocket from Wahl Bros. This is a No-Slip Drive
Sprocket for the Ski-Doo splined drive shafts found on most 2008 to
present machines. An assembly sleeve is necessary when pressing
sprockets on to prevent sprocket damage. Sold individually.
02-547…..No-Slip 3.0'' Pitch Splined Drive Sprocket ,8T ....................$91.95
02-546.....Alum. Assembly Sleeve, Ski-Doo ........................................$15.95
Involute Drive Sprockets
8 Tooth (Approx. Diameter 9 7/16”)
02-554…...Anti Ratchet Sprocket, 8T,
02-556…...Anti Ratchet Sprocket, 8T,
02-558…...Anti Ratchet Sprocket, 8T,
9 Tooth (Approx. Diameter 6 3/4”)
02-549…...Anti Ratchet Sprocket, 9T,
02-550…...Anti Ratchet Sprocket, 9T,
02-552…...Anti Ratchet Sprocket, 9T,
UHMW drive sprockets for hex shafts,
manufactured by PPD. These 2.52” pitch
sprockets fit most stock rubber tracks and
the rubber tracks we offer.
8 Tooth (Approx. Diameter 6.20”)
02-508…..8T, Full, 1 1/16” to 1 1/8”......................................................$24.95
02-510…..8T, Half, 1 1/16” to 1 1/8” ....................................................$24.95
9 Tooth (Approx. Diameter 7.07”)
02-516…..9T, Full, 1” ..........................................................................$24.95
02-518…..9T, Half , 1” ........................................................................$24.95
02-517…..9T, Full, 1 1/16” to 1 1/8”......................................................$24.95
02-519…..9T, Half, 1 1/16” to 1 1/8” ....................................................$24.95
02-520…..9T, Full, 1 1/4” ....................................................................$24.95
02-522…..9T, Half, 1 1/4” ....................................................................$24.95
10 Tooth (Approx. Diameter 7.75”)
02-524…..10T, Full, 1” ..........................................................................$35.00
02-526…..10T, Half, 1”..........................................................................$45.00
02-525…..10T, Full, 1 1/16” to 1 1/8”....................................................$35.00
02-527…..10T, Half, 1 1/16” to 1 1/8” ..................................................$45.00
02-528…..10T, Full, 1 1/4” ....................................................................$35.00
02-530…..10T, Half, 1 1/4” ..................................................................$45.00
1” Hex ......................................$50.00
1 1/16” Hex to 1 1/8” Hex ........$50.00
1 1/4” ......................................$50.00
1” Hex ......................................$50.00
1 1/16” to 1 1/8” Hex ................$50.00
1 1/4” Hex ................................$50.00
Aluminum Drive Wheels
Precision machined, billet aluminum
involute drive wheels resist wheel flex
and distortion. Order hex hubs separately to match your drive shaft. The drivers
and hex hubs are sold individually.
Fasteners included with hex hubs.
Wide Band
10 Tooth Driver
10 tooth drivers for use in applications
where you will be using only two drive
sprockets. Great for Asphalt and grass
drags where closed windows are in use. Sold in one broach
size only, they will work on 1 1/16” shafts and 1 1/8” shafts. ..
Hex Hubs
02-538…..Aluminum Drive Wheel Hex Hub, 1 1/16”, ea. ....................$45.00
02-539…..Aluminum Drive Wheel Hex Hub, 1 1/8”, ea. ......................$45.00
02-540…..Aluminum Drive Wheel Hex Hub, 1 1/4”, ea. ......................$45.00
02-542…..1 1/16” Dual Aluminum Hex Hub, ea. ................................$185.00
02-543…..1 1/8” Dual Aluminum Hex Hub, ea. ..................................$185.00
02-544…..1 1/4” Dual Aluminum Hex Hub, ea. ..................................$185.00
02-523…..Drive Sprocket, 10 tooth, 1 1/16”-1 1/8” Hex ......................$40.00
Drive Sprocket Hex Sizes
1”
Polaris, Pre-Edge & Gen II
1 1/16” Arctic Cat, Polaris Edge & later, post ‘95 Yamaha
1 1/8” Wahl Titanium & ZX platform & later Ski-Doo’s
1 1/4” PRS & Previous Ski-Doo, Arctic King Cat
NOTE: For tighter sprocket fit, 1” wheels may be
pressed on 1 1/16” Shaft
15
DRIVE SPROCKETS
9 Tooth (Approx. Diameter 7.0”)
02-531…..Aluminum 9T Involute Drive Wheel, Full, ea. ....................$155.00
02-532…..Aluminum 9T Involute Drive Wheel, Half, ea. ..................$155.00
10 Tooth (Approx. Diameter 7 13/16”)
02-533…..Aluminum 10T Involute Drive Wheel, Full, ea. ..................$155.00
02-534…..Aluminum 10T Involute Drive Wheel, Half, ea. ................$155.00
11 and 12 Tooth (Approx. Diameter 8 5/8”)
02-541…..Aluminum 11T Involute Drive Wheel, Full, ea. ..................$185.00
02-545…..Aluminum 12T Involute Drive Wheel, Full, ea. ..................$230.00
Drive Sprockets/Drive System Components
Cleated Track Drive
Sprockets
Aluminum Hex Locking Hubs
Aluminum Hex Hubs lock the plastic
drive wheels on your hex shaft, preventing drive wheel and track damage
caused by the drive wheel spinning on
the shaft. The hubs also prevent side
to side movement on shaft. Drive wheel must be machined
flush on one side for installation. Sold as a pair and include
fasteners.
These UHMW drivers fit the Wahl
Bros. cleated tracks and other cleat
driven 3.29 Pitch cleated tracks. Be
sure to check hex diameter before
ordering. The 7 tooth drivers (manufactured by PPD) can be
purchased as a set or individually while the 6 tooth drivers
are sold individually only. You must use a Center Idler Wheel
to help support the cleat.
02-560A....Hex Hub Set, 1” ..................................................................$85.00
02-562A…Hex Hub Set, 1 1/16” ..........................................................$85.00
02-564A…Hex Hub Set, 1 1/8” ............................................................$85.00
02-566A…Hex Hub Set, 1 1/4” ............................................................$85.00
6 Tooth Drivers, 6.25” OD
02-483…..Convolute Drive Wheel, 6T, 1" to 1 1/16" Hex, ea.............$130.00
02-485…..Convolute Drive Wheel, 6T, 1 1/8" Hex, ea. ......................$130.00
6 Tooth Center Idlers
02-486…..5.930'' Diameter Center Idler, 1'' Hex, ea. ..........................$25.00
02-487…..5.930'' Diameter Center Idler, 1 1/16'' to 1 1/8'' Hex, ea. ....$25.00
7 Tooth Drive Sets, 7.33” OD
02-470A...Convolute Drive Wheel Set, 1” Hex ....................................$98.00
02-471A...Convolute Drive Wheel Set, 1 1/16” to 1 1/8” Hex ..............$98.00
02-472A...Convolute Drive Wheel Set, 1 1/4” Hex ..............................$98.00
Replacement Center Idlers for 7 Tooth
02-474…..6.86” Diameter Center Idler Wheel, 1” Hex, ea. ..................$20.00
02-476…..6.86” Diameter Center Idler Wheel,
1 1/16” to 1 1/8” Hex, ea. ....................................................$20.00
02-478…..6.86” Diameter Center Idler Wheel, 1 1/4” Hex, ea. ............$20.00
Replacement 7 Tooth Drive Wheels
02-480…..Convolute Drive Wheel, 1” Hex, ea. ....................................$39.00
02-481…..Convolute Drive Wheel, 1 1/16” to 1 1/8” Hex, ea...............$39.00
02-482…..Convolute Drive Wheel, 1 1/4” Hex, ea. ..............................$39.00
Drive System
Components
Titanium Drive &
Jackshafts
Titanium drive and jackshafts
are known for their strength
and lightweight abilities.
Titanium is half the weight of
steel, which makes for quicker
RPM's and higher speeds. Increased diameter reduces flexibility. Each titanium shaft weighs approximately 3 1/2 pounds.
Special built shafts are available upon request. All drive
shafts are 1 1/8” Hex.
DRIVE SPROCKETS/DRIVE SYSTEM
Anti-Stab Wheel Kits
Stab wheel kits help to prevent
track spearing by preventing the
track from coming into contact with the tips of the suspension
rails. These wheel kits can replace the stock limiter strap
mount. You need to know if you have a centered or off-centered limiter strap. The two styles include all of the necessary
hardware needed to mount the wheel kit to the tips of your
rails, which includes four 2 3/4” rubber wheels, shaft, spacers
and bolts. Highly recommended when removing the stock
plastic rail tips. Remember to use thread lock.
Centered Limiter Strap Applications:
02-790A… Arctic Cat & Yamaha Split Stab Wheel Kit, 8 3/4" Shaft ....$94.95
02-792A… Polaris & Ski-Doo Split Stab Wheel Kit, 8 5/8" Shaft..........$94.95
Dual Limiter Strap Applications:
02-791A….Arctic Cat & Yamaha Centered Stab Wheel Kit,
8 3/4" Shaft ........................................................................$94.95
02-793A….Polaris & Ski-Doo Centered Stab Wheel Kit,
8 5/8" Shaft ........................................................................$94.95
Drive Axle Collars
Use these split hex collars to keep your
drive wheels from moving on your drive
shaft by attaching them on both sides
of the drive wheel. The collars can be
installed without removing the wheels.
Kit includes two collars and fasteners.
02-570A…..Drive Axle
02-571A…..Drive Axle
02-572A…..Drive Axle
02-573A…..Drive Axle
Collars,
Collars,
Collars,
Collars,
Order Line 800-883-0294
1” ........................................................$49.50
1 1/16” ................................................$49.50
1 1/8” ..................................................$49.50
1 1/4" ..................................................$49.50
16
Drive Shafts
Wahl Drive Shaft
05-172…..Wahl Dragster Drive Shaft, 1”-15 Spline............................$650.00
05-176…..Wahl '05-present Drag Chassis Drive Shaft, 1"-15 Spline ..$650.00
Polaris Drive Shaft
05-132…..Polaris Drive Shaft, 1”-15 Spline,
Pre Edge (seal in chain case)....................................................$650.00
05-133…..Polaris Drive Shaft, Edge, 1”-15 Spline ............................$650.00
Arctic Drive Shaft
05-144…..Arctic Drive Shaft, 1”-15 Spline..........................................$650.00
05-145…..Arctic Firecat Drive Shaft, 1”-15 Spline..............................$650.00
Ski-Doo Drive Shaft
05-106…..Ski-Doo DSA Drive Shaft, 27mm-17 Spline ......................$650.00
05-107…..Ski-Doo MXZ 600, 700, 800 Drive Shaft, 27mm-17 Spline $650.00
05-109…..Ski-Doo CK3 Drive Shaft, 27mm-17 Spline ......................$650.00
05-110…..Ski-Doo Drive Shaft, All REV, 27mm-17 Spline ................$650.00
Yamaha Drive Shaft
05-158…..Yamaha Drive Shaft, SX, XT, SRX, 1”-15 Spline ..............$650.00
05-160…..Yamaha Drive Shaft, RX-1, 1”-15 Spline ..........................$650.00
Jackshafts
Wahl Dragster Jackshaft
05-170…..Wahl Jackshaft, 1”-15 Spline ............................................$650.00
05-174…..Wahl '05-present Drag Chassis Jackshaft, 1''-15 Spline ..$650.00
Polaris Jackshaft
05-122…..Polaris Jackshaft, Splined Brake, 7/8”-13 Spline ..............$650.00
05-124…..Polaris Jackshaft, Pre Fusion, Splined Brake, 1”-15 Spline $650.00
05-120…..Polaris Jackshaft, Keyed Brake, 7/8”-13 Spline ................$650.00
Arctic Jackshaft
05-140…..Arctic Jackshaft, ZR, 26”, 7/8”-13 Spline ..........................$650.00
05-142…..Arctic Jackshaft, ZRT & T-Cat, 27”, 7/8”-13 Spline ............$650.00
05-141…..Arctic Firecat Jackshaft, 22”, 7/8”-13 Spline ......................$650.00
Titanium Shafts Continued on Next Page...
Drive System Components
Order Line 800-883-0294
Lightweight Polaris Jackshaft
(Continued)
Ski-Doo Jackshaft
05-101…..Ski-Doo CK3 and MXZ 600, 700, 800 Jackshaft,
ZX Platform........................................................................$650.00
05-102…..Ski-Doo DSA Jackshaft, 25mm clutch, 25mm-15 ..............$650.00
05-104…..Ski-Doo DSA, CK 3 and ZX Platform Jackshaft, 1” Clutch....$650.00
Yamaha Jackshaft
05-156…..Yamaha Jackshaft, SX,XT,SRX, 1”-15 Spline....................$650.00
05-157…..Yamaha Jackshaft, SX, XT, SRX, 1”-15 Spline, 1” Clutch ....$650.00
05-152…..Yamaha Jackshaft, Exciter, 1”-15 Spline, 1” Clutch ..........$650.00
Gain quicker RPM's that result in higher speeds with our Polaris
engineered Jackshaft. This Lightweight Jackshaft reduces rotating mass by 1 pound 9 ounces. Available for twin cylinder models only. Works on Edge, IQ and Pre Edge models.
05-049…..Polaris Lightweight Jackshaft, 25” , Splined Brake,
1”-15 ..................................................................................$348.95
TEAM Ski-Doo XP Hollow Jackshaft
Steel Drive & Jackshafts
Quickly convert your QRS clutch and jackshaft assembly for
use of Ski-Doo Formula, HPV 27, HPV Roller and Team
Industries driven clutch. Fits Ski-Doo REV XP, Summit XP and
GSX XP. Kit comes complete with jackshaft and new bearing.
The steel shafts from Wahl Brothers are a mixture of OEM
replacements and aftermarket productions. The OEM's are
denoted. All aftermarket shafts are stronger than OEM and
derived from Micro-loy steel with 1 1/8” hex.
05-050…..TEAM Ski-Doo XP Hollow Jackshaft ................................$399.00
Drive Shafts
Polaris Drive Shafts
05-042…..Polaris OEM Drive Shaft, (Does not fit Gen II or Edge)
1”-15 ..................................................................................$174.55
05-038…..Polaris OEM Drive Shaft, Edge 1”-15 with 2 Drivers,
Bearing & Flange ..............................................................$221.00
05-045…..Polaris Steel Shaft, Fusion Replacement w/Spacer ..........$245.00
05-131…..Polaris Steel Shaft, 1 1/8” Hex, Edge ................................$245.00
Arctic Drive Shafts
05-020…..Arctic OEM Drive Shaft, Old Style 19 1/2”, 1”-15 ..............$118.95
05-022…..Arctic OEM Drive Shaft, ZR, T-Cat Style 20”, 1”-15 ..........$102.95
Wahl Drive Shafts
05-177…..Steel Drive Shaft, Wahl '05-present Drag Chassis,
1''-15 Spline ......................................................................$245.00
Jackshafts
Polaris Jackshafts
05-046.....Polaris OEM Jackshaft, Splined Brake, 25”, 7/8”-13 ..........$151.25
05-048.....Polaris OEM Jackshaft, Splined Brake, 25 5/8”, 1”-15 ......$151.25
05-049.....Polaris Jackshaft, Splined Brake, 25”, 1”-15, (lightweight) $348.95
Arctic Jackshafts
05-024…..Arctic OEM Jackshaft, 1” Brake Hub, 25 7/8”, 7/8”-13 ........$92.95
05-026…..Arctic OEM Jackshaft, ZR 26”, 7/8”-13 ..............................$101.25
05-028…..Arctic OEM Jackshaft, ZRT & T-Cat 27”, 7/8”-13 ................$98.95
Wahl Jackshaft
05-175…..Steel Jackshaft, Wahl '05-present Drag Chassis,
1''-15 Spline ......................................................................$245.00
Fusion Replacement
Drive Assembly
Wahl Bros. offers a 1 1/8” drive shaft
that will replace the Polaris splined
tubular shaft with a hex shaft allowing
the use of any No-Slip Drive Sprocket. Included spacer provides the sealing surface. Requires a 1” ID locking bearing.
Utilizes stock mounting flange.
Shafts
05-045…..Polaris Steel Shaft, Fusion Replacement w/Spacer ..........$245.00
Bearings
05-819.....NTN 1” ID Spherical Bearing with Set Screws ....................$19.65
05-823.....NTN 1” ID Spherical Bearing with Lock Collar ....................$18.65
05-809.....Seal Master 1” ID Spherical Bearing with Collet
Style Lock ............................................................................$91.95
Bearings
Race proven bearings by the top manufacturers in the bearing world. The Formula bearing
by NTN has optimum fill, special low temperature grease and is manufactured to tolerances tighter than industry standards. Along
with their exclusive low-drag double lip seal, this bearing is superior
to most. Bearings are listed by ID.
Custom Drive & Jackshafts
At Wahl Bros. Racing we take pride in our ability to assist our
customers with their special needs. We offer the service of
custom making Titanium and Steel driveshafts and jackshafts.
If we do not have a diagram of the requested shaft, a sample
or drawing will be required. All inquiries are welcome.
Drive Shafts
05-015.....Custom Steel Drive Shaft ..................................................$245.00
05-018.....Custom Titanium Driveshaft ..............................................$650.00
Jackshafts
05-016.....Custom Steel Jackshaft ......................................................$245.00
05-019.....Custom Titanium Jackshaft ................................................$650.00
A steel jackshaft that allows the use of any 1” ID converter
such as Arctic or original Polaris. Requires a locking type
bearing.
05-047.....Polaris IQ Steel Jackshaft
(for 1'' ID clutches with 1/4'' Key) ......................................$245.00
Bearings
05-819…..Spherical Bearing w/Set Screws, 1” ID, NTN AS205-100 ..$19.65
05-823…..NTN Spherical Bearing w/Lock Collar, 1'' ID, AEL205-100..$18.65
05-809…..Seal Master 1" ID Bearing with Collet Style Lock, Polaris ..$91.95
17
DRIVE SYSTEM COMPONENTS
Polaris IQ Jackshaft Conversion
5/8” ID
02-390….NTN 5/8'' ID Bearing, OEM 6202............................................$7.85
20mm ID (.788”)
02-391…..NTN 20mm ID Bearing, OEM 6004 ......................................$9.35
02-395…..NTN 20mm ID Bearing, OEM 6204 ......................................$8.25
02-397…..NTN 20mm ID Bearing, 52mm OD, OEM 6304LLU ............$11.55
7/8” ID
05-820…..Spherical Bearing w/Lock Collar, 7/8” ID, FAFNIR ..............$12.00
05-821…..NTN Spherical Bearing w/Lock Collar, 7/8” ID, AEL205-014 ..$18.65
05-817…..NTN Spherical Bearing w/Set Screws, 7/8'' ID, AS205/7 ....$18.65
1”
02-394…..NTN 1” ID Bearing, OEM 6205-25.4......................................$9.35
05-814…..NTN 1'' ID Bearing w/Set Screws, OEM ASS-205-100 ......$18.65
05-815…..NTN 1'' ID Bearing w/Lock Collar, OEM AELS-205-100......$18.65
05-818…..Spherical Bearing w/Set Screws, 1” ID, OEM Polaris ........$47.65
05-819…..NTN Spherical Bearing w/Set Screws, 1” ID, AS205-100 ..$19.65
05-823…..NTN Spherical Bearing w/Lock Collar, 1'' ID, AEL205-100 ..$18.65
05-811…..NTN 1'' ID Spherical Bearing w/o Collar,CS205 100 ..........$13.25
05-809…..Seal Master 1" ID Bearing with Collet Style Lock, Polaris ..$91.95
25mm (.984”)
02-392…..NTN 25mm ID Bearing, OEM 6205 ......................................$8.65
05-812…..Koyo 25 mm ID Spherical Bearing w/o Collars, CS205LLU ..$17.95
30mm (1.81”)
05-813…..NTN Bearing, 30mm ID x 55mm OD x 13mm Wide, 6006..$10.45
05-816…..NTN 30mm ID Bearing, Ski-Doo Chaincase, 6206 ............$10.45
Drive System Components/Chains & Gears
Bearing Holders and
Accessories
7/8”-13 Spline Upper Gears
Continued...
Our aluminum bearing holder for the
52mm OD, 6205 bearing has the
same bolt pattern as the flangettes and many other OEM's.
The Oil Seal sleeve is the same spacer used on Polaris
25mm OD shafts for chain case sealing and the 25mm ID
o-ring is for the sleeve to assist in sealing.
13 Wide (5/8”)
05-323…..7/8”-13
05-324…..7/8”-13
05-326…..7/8”-13
05-328…..7/8”-13
05-330…..7/8”-13
05-332…..7/8”-13
05-334…..7/8”-13
05-336…..7/8”-13
05-338…..7/8”-13
05-340…..7/8”-13
05-342…..7/8”-13
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
16
17
18
19
20
21
22
23
24
25
26
tooth......................................$23.95
tooth......................................$24.95
tooth......................................$25.95
tooth......................................$26.95
tooth......................................$27.95
tooth......................................$28.95
tooth......................................$29.95
tooth......................................$30.95
tooth......................................$31.95
tooth......................................$32.95
tooth......................................$33.95
15 Wide (3/4”)
05-419…..7/8”-13
05-420…..7/8”-13
05-422…..7/8”-13
05-424…..7/8”-13
05-426…..7/8”-13
05-428…..7/8”-13
05-430…..7/8”-13
05-431…..7/8”-13
05-427…..7/8”-13
05-429…..7/8”-13
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
17
18
19
20
21
22
23
24
25
26
tooth......................................$29.95
tooth......................................$30.95
tooth......................................$31.95
tooth......................................$32.95
tooth......................................$33.95
tooth......................................$34.95
tooth......................................$35.95
tooth......................................$36.95
tooth......................................$37.95
tooth......................................$38.95
Bearing Holders
05-832…..Aluminum Bearing Holder, Triangle ....................................$35.50
05-833…..Aluminum Bearing Holder, Champ Style, Round ................$33.50
05-826…..Flangette, for 2” Spherical Bearing, Triangle, Steel ..............$2.25
Holder Components
02-400…..Bearing Circlip, 6205..............................................................$1.20
05-824…..O-Ring Seal, for 2” OD Spherical Bearing ............................$1.65
05-828…..Carriage Bolt, 5/16” x 3/4" ......................................................$.55
05-830…..Ribbed Bolt, 5/16” x 5/8” ..........................................................$.95
Drive Shaft Oil Seal/Sleeve
05-825…..Polaris Chaincase Seal, 52mm OD, OEM 3610030..............$8.15
05-827…..Oil Seal Sleeve, 25mm ID, ea. ............................................$17.45
05-829…..Oil Seal Sleeve O-Ring, ea. ..................................................$1.15
Billet Chaincase
The same chaincase used on the
Wahl Bros. Drag Chassis. Will
accept up to 26 tooth upper gear
and 45 tooth lower gear. Center
distance is 7.8125” and is 2” deep.
Chaincase is held in place with the aluminum bearing holders. Order cover and components separately.
1”-15 Spline Steel Upper Gear
These steel silent gears are several times stronger than
OEM's. They can be used on any shaft that is 1”-15 spline,
but are most common in the 1996-present Polaris and all
Yamaha's up until the RX-1.
05-836....Billet Chaincase, 7.8125” Centers ......................................$395.00
05-837…Billet Chaincase Cover ........................................................$140.00
05-838...Oil Fill Plug, Chaincase ............................................................$4.35
06-782...Chaincase Vent, 1/8” ................................................................$2.45
05-833…Billet Aluminum Bearing Holder ............................................$33.50
05-800...Tensioner Block, Plastic..........................................................$19.75
02-210...Tensioner Bolt, 3/8”-16 x 4” ......................................................$1.25
Chains & Gears
7/8”-13 Spline Upper
Gears
These steel upper gears fit the jackshaft of all current Arctic Cats except
the Diamond Drive models, and all Pre
'96 Polaris sleds. Heat treated steel,
these gears are several times stronger than stock. These gears are
used with 11, 13 & 15 wide silent chain.
DRIVE SYSTEM COMP./GEARS
Order Line 800-883-0294
11 Wide (1/2”)
05-300…..7/8”-13
05-302…..7/8”-13
05-304…..7/8”-13
05-306…..7/8”-13
05-308…..7/8”-13
05-310…..7/8”-13
05-312…..7/8”-13
05-314…..7/8”-13
05-316…..7/8”-13
05-318…..7/8”-13
05-320…..7/8”-13
05-322…..7/8”-13
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear (Polaris), 15 tooth ......................$38.75
Gear, 16 tooth......................................$22.95
Gear, 17 tooth......................................$23.95
Gear, 18 tooth......................................$24.95
Gear, 19 tooth......................................$25.95
Gear, 20 tooth......................................$26.95
Gear, 21 tooth......................................$27.95
Gear, 22 tooth......................................$28.95
Gear, 23 tooth......................................$29.95
Gear, 24 tooth......................................$30.95
Gear, 25 tooth......................................$31.95
Gear, 26 tooth......................................$32.95
18
11 Wide (1/2”)
05-343…..1”-15
05-344…..1”-15
05-346…..1”-15
05-348…..1”-15
05-350…..1”-15
05-352…..1”-15
05-354…..1”-15
05-356…..1”-15
05-358…..1”-15
05-357…..1”-15
05-353…..1”-15
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
16
17
18
19
20
21
22
23
24
25
26
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
........................................$22.95
........................................$23.95
........................................$24.95
........................................$25.95
........................................$26.95
........................................$27.95
........................................$28.95
........................................$29.95
........................................$30.95
........................................$31.95
........................................$32.95
13 Wide (5/8”)
05-359…..1”-15
05-360…..1”-15
05-362…..1”-15
05-364…..1”-15
05-366…..1”-15
05-368…..1”-15
05-370…..1”-15
05-372…..1”-15
05-371…..1”-15
05-373…..1”-15
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
17
18
19
20
21
22
23
24
25
26
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
........................................$24.95
........................................$25.95
........................................$26.95
........................................$27.95
........................................$28.95
........................................$29.95
........................................$30.95
........................................$31.95
........................................$32.95
........................................$33.95
15 Wide (3/4”)
05-433…..1”-15
05-432…..1”-15
05-434…..1”-15
05-436…..1”-15
05-438…..1”-15
05-440…..1”-15
05-442…..1”-15
05-444…..1”-15
05-446…..1”-15
05-447…..1”-15
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
17
18
19
20
21
22
23
24
25
26
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
........................................$29.95
........................................$30.95
........................................$31.95
........................................$32.95
........................................$33.95
........................................$34.95
........................................$35.95
........................................$36.95
........................................$37.95
........................................$38.95
Chains & Gears
Order Line 800-883-0294
13 Wide (5/8”)
05-520…..1”-15
05-524…..1”-15
05-526…..1”-15
05-528…..1”-15
05-530…..1”-15
05-532…..1”-15
05-534…..1”-15
05-536…..1”-15
05-538…..1”-15
05-539…..1”-15
05-535…..1”-15
05-537…..1”-15
05-541…..1”-15
15 Wide (3/4”)
05-583…..1”-15
05-580…..1”-15
05-581…..1”-15
05-585…..1”-15
05-582…..1”-15
05-584…..1”-15
05-586…..1”-15
05-588…..1”-15
05-590…..1”-15
05-591…..1”-15
05-587…..1”-15
05-589…..1”-15
Machined hardened steel gears for all Ski-Doo sleds.
Standard REV XP is 13 Wide. Available in 11, 13 and 15
wide, these gears are several times stronger than stock.
11 Wide (1/2”)
05-377…..25-15
05-374…..25-15
05-376…..25-15
05-378…..25-15
05-380…..25-15
05-382…..25-15
05-384…..25-15
05-386…..25-15
05-388…..25-15
05-390…..25-15
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
17
18
19
20
21
22
23
24
25
26
tooth........................................$23.95
tooth........................................$24.95
tooth........................................$25.95
tooth........................................$26.95
tooth........................................$27.95
tooth........................................$28.95
tooth........................................$29.95
tooth........................................$30.95
tooth........................................$31.95
tooth........................................$32.95
13 Wide (5/8”)
05-387…..25-15
05-391…..25-15
05-392…..25-15
05-394…..25-15
05-396…..25-15
05-398…..25-15
05-400…..25-15
05-402…..25-15
05-404…..25-15
05-406…..25-15
05-408…..25-15
05-410…..25-15
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
17
18
19
20
21
22
23
24
25
26
27
28
tooth........................................$24.95
tooth........................................$25.95
tooth........................................$26.95
tooth........................................$27.95
tooth........................................$28.95
tooth........................................$29.95
tooth........................................$30.95
tooth........................................$31.95
tooth........................................$32.95
tooth........................................$33.95
tooth........................................$34.95
tooth........................................$35.95
15 Wide (3/4”)
05-449…..25-15
05-450…..25-15
05-452…..25-15
05-454…..25-15
05-456…..25-15
05-458…..25-15
05-460…..25-15
05-462…..25-15
05-464…..25-15
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
18
19
20
21
22
23
24
25
26
tooth........................................$30.95
tooth........................................$31.95
tooth........................................$32.95
tooth........................................$33.95
tooth........................................$34.95
tooth........................................$35.95
tooth........................................$36.95
tooth........................................$37.95
tooth........................................$38.95
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
33
34
35
36
37
38
39
40
41
42
43
44
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
33
35
36
37
38
39
40
41
42
43
44
45
46
tooth........................................$43.95
tooth........................................$45.95
tooth........................................$46.95
tooth........................................$47.95
tooth........................................$48.95
tooth........................................$49.95
tooth........................................$50.95
tooth........................................$51.95
tooth........................................$52.95
tooth........................................$53.95
tooth........................................$54.95
tooth........................................$55.95
tooth........................................$56.95
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
33
35
36
37
38
39
40
41
42
43
44
45
tooth........................................$56.95
tooth........................................$58.95
tooth........................................$59.95
tooth........................................$60.95
tooth........................................$61.95
tooth........................................$62.95
tooth........................................$63.95
tooth........................................$64.95
tooth........................................$65.95
tooth........................................$66.95
tooth........................................$67.95
tooth........................................$68.95
Heat treated steel gears for Ski-Doo snowmobiles. Available
in 13 wide and 15 wide.
13 Wide (5/8”)
05-706…..27mm-17,
05-708…..27mm-17,
05-710…..27mm-17,
05-712…..27mm-17,
05-714…..27mm-17,
05-716…..27mm-17,
05-718…..27mm-17,
05-715…..27mm-17,
05-717…..27mm-17,
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
38
39
40
41
42
43
44
45
46
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
................................$48.95
................................$49.95
................................$50.95
................................$51.95
................................$52.95
................................$53.95
................................$54.95
................................$55.95
................................$56.95
15 Wide (3/4”)
05-719…..27mm-17, Steel Lower Gear, 38 tooth ................................$59.95
05-720…..27mm-17, Steel Lower Gear, 39 tooth ................................$60.95
05-722…..27mm-17, Steel Lower Gear, 40 tooth ................................$61.95
Machined steel lower gears for Polaris, Arctic and Yamaha
sleds. Stronger than stock, these gears are available in 11,
13 and 15 wide. They are 1”-15 spline.
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
27mm-17 Spline Steel Lower Gears
1”-15 Spline Lower Steel Gears
11 Wide (1/2”)
05-500…..1”-15
05-502…..1”-15
05-504…..1”-15
05-506…..1”-15
05-508…..1”-15
05-510…..1”-15
05-512…..1”-15
05-514…..1”-15
05-516…..1”-15
05-518…..1”-15
05-519…..1”-15
05-517…..1”-15
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Ski-Doo XP Gears
Heat treated steel gears for Ski-Doo ‘08-Present REV XP
snowmobiles. 50mm-32 Spline. Some sizes available in
Aluminum as indicated.
tooth........................................$41.95
tooth........................................$42.95
tooth........................................$43.95
tooth........................................$44.95
tooth........................................$45.95
tooth........................................$46.95
tooth........................................$47.95
tooth........................................$48.95
tooth........................................$49.95
tooth........................................$50.95
tooth........................................$51.95
tooth........................................$52.95
05-687…..Ski-Doo
05-683…..Ski-Doo
05-688…..Ski-Doo
05-684…..Ski-Doo
05-685…..Ski-Doo
05-689…..Ski-Doo
05-690…..Ski-Doo
05-691…..Ski-Doo
05-692…..Ski-Doo
05-686…..Ski-Doo
05-693…..Ski-Doo
05-698…..Ski-Doo
05-694…..Ski-Doo
05-699…..Ski-Doo
05-695…..Ski-Doo
05-696…..Ski-Doo
05-700…..Ski-Doo
05-697…..Ski-Doo
19
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
XP Gear,
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
50mm-32
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
36
37
38
39
40
41
42
43
44
45
46
46
47
47
48
49
49
51
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth ......................$79.95
tooth, Aluminum ....$96.50
tooth ......................$79.95
tooth, Aluminum ....$96.50
tooth ......................$79.95
tooth ......................$79.95
tooth, Aluminum ....$96.50
tooth ......................$89.95
CHAINS & GEARS
25mm 15 Spline Upper Steel Gears
CHAINS & GEARS
Chains & Gears
Order Line 800-883-0294
Ski-Doo Aluminum Lower Gears
Polaris HYVO Steel Gears
These lightweight aluminum gears are 1/3 the weight of steel
gears and significantly reduce rotating mass. The gears are
strong enough to withhold a season of abuse in most racing
circumstances. Try to use a gear ratio that allows for a tight
chain. To help prolong the life of the gear, we recommend
one ounce of Energy Release along with your chain lube.
Upper & Lower
Machined from steel, these hardened HYVO gears fit 1998
and newer Polaris models with 3/4” wide HYVO chain. They
will not interchange with standard silent chain or sprockets.
Can be used with any 1”-15 Spline shaft. .670” Wide.
Upper
05-750…..HYVO
05-751…..HYVO
05-752…..HYVO
05-754…..HYVO
05-756…..HYVO
05-758…..HYVO
05-760…..HYVO
05-762…..HYVO
05-764…..HYVO
05-766…..HYVO
05-768…..HYVO
Lower
05-769…..HYVO
05-770…..HYVO
05-772…..HYVO
05-774…..HYVO
05-776…..HYVO
05-778…..HYVO
05-780…..HYVO
05-782…..HYVO
05-784…..HYVO
05-786…..HYVO
05-787…..HYVO
05-788…..HYVO
05-789…..HYVO
13 Wide Aluminum Ski-Doo Gears (5/8”)
05-599…..13 Wide, 27mm-17 Spline, 38 Tooth....................................$63.95
05-601…..13 Wide, 27mm-17 Spline, 39 Tooth....................................$64.95
05-592…..13 Wide, 27mm-17 Spline, 40 Tooth....................................$65.95
05-593…..13 Wide, 27mm-17 Spline, 41 Tooth....................................$66.95
05-594…..13 Wide, 27mm-17 Spline, 42 Tooth....................................$67.95
05-595…..13 Wide, 27mm-17 Spline, 43 Tooth....................................$68.95
05-596…..13 Wide, 27mm-17 Spline, 44 Tooth....................................$69.95
05-603…..13 Wide, 27mm-17 Spline, 45 Tooth....................................$70.95
05-597…..13 Wide, 27mm-17 Spline, 46 Tooth....................................$71.95
05-598…..13 Wide, 27mm-17 Spline, 47 Tooth....................................$72.95
1”-15 Silent Aluminum Bottom Gears
Lightweight aluminum gears are 1/3 the weight of steel
gears. This significantly reduces rotating mass freeing up that
extra horse power and torque to produce quicker ET's. These
gears will work on the lower shaft of most Arctic, Polaris and
Yamaha. To help prolong the life of the gear, we recommend
one ounce of Energy Release along with your chain lube.
11 Wide (1/2”)
05-540…..1”-15
05-544…..1”-15
05-548…..1”-15
05-550…..1”-15
05-552…..1”-15
05-554…..1”-15
05-556…..1”-15
05-558…..1”-15
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
33
35
37
38
39
40
41
42
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
......................$57.95
......................$59.95
......................$61.95
......................$62.95
......................$63.95
......................$64.95
......................$65.95
......................$66.95
13 Wide (5/8”)
05-560…..1”-15
05-564…..1”-15
05-568…..1”-15
05-570…..1”-15
05-572…..1”-15
05-574…..1”-15
05-576…..1”-15
05-578…..1”-15
05-579…..1”-15
05-575…..1”-15
05-577…..1”-15
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Silent Aluminum
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
33
35
37
38
39
40
41
42
43
44
45
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
tooth
......................$58.95
......................$60.95
......................$62.95
......................$63.95
......................$64.95
......................$65.95
......................$66.95
......................$67.95
......................$68.95
......................$69.95
......................$70.95
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
16T
17T
18T
19T
20T
21T
22T
23T
24T
25T
26T
................................$34.95
................................$25.95
................................$26.95
................................$27.95
................................$28.95
................................$29.95
................................$30.95
................................$31.95
................................$32.95
................................$33.95
................................$34.95
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Lower
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
1”-15
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
Spline,
33T
35T
36T
37T
38T
39T
40T
41T
42T
43T
44T
45T
46T
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
................................$52.95
Yamaha HYVO Steel Gears
Upper and lower 3/4” wide HYVO Steel gears for the RX-1,
SX, SRX & Viper are composed of heat-treated, case hardened steel. The lower gears will all interchange between
models. The RX-1, Apex & Attak upper gears will not interchange with any other models and have a 16 spline.
RX-1 Upper Gears, 27mm-16 Spline
05-849…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 18 tooth ..........$30.95
05-850…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 19 tooth ..........$31.95
05-851…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 20 tooth ..........$32.95
05-852…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 21 tooth ..........$33.95
05-853…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 22 tooth ..........$34.95
05-854…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 23 tooth ..........$35.95
05-855…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 24 tooth ..........$36.95
05-856…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 25 tooth ..........$37.95
05-857…..RX-1 HYVO Upper Gear, 27mm-16 Spline, 26 tooth ..........$38.95
Yamaha Upper Gears, 1”-15 Spline
05-860…..Yamaha HYVO Upper Gear, 1”-15 Spline, 18 tooth ............$27.95
05-861…..Yamaha HYVO Upper Gear, 1”-15 Spline, 19 tooth ............$28.95
05-862…..Yamaha HYVO Upper Gear, 1”-15 Spline, 20 tooth ............$29.95
05-863…..Yamaha HYVO Upper Gear, 1”-15 Spline, 21 tooth ............$30.95
05-864…..Yamaha HYVO Upper Gear, 1”-15 Spline, 22 tooth ............$31.95
05-865…..Yamaha HYVO Upper Gear, 1”-15 Spline, 23 tooth ............$32.95
05-866…..Yamaha HYVO Upper Gear, 1”-15 Spline, 24 tooth ............$33.95
05-867…..Yamaha HYVO Upper Gear, 1”-15 Spline, 25 tooth ............$34.95
Yamaha Lower Gears, 1”-15 Spline
05-870…..Yamaha HYVO Lower Gear, 1”-15 Spline, 33 tooth ............$54.95
05-871…..Yamaha HYVO Lower Gear, 1”-15 Spline, 35 tooth ............$54.95
05-869…..Yamaha HYVO Lower Gear, 1”-15 Spline, 36 tooth ............$54.95
05-872…..Yamaha HYVO Lower Gear, 1”-15 Spline, 37 tooth ............$54.95
05-873…..Yamaha HYVO Lower Gear, 1”-15 Spline, 38 tooth ............$54.95
05-874…..Yamaha HYVO Lower Gear, 1”-15 Spline, 39 tooth ............$54.95
05-875…..Yamaha HYVO Lower Gear, 1”-15 Spline, 40 tooth ............$54.95
05-876…..Yamaha HYVO Lower Gear, 1”-15 Spline, 41 tooth ............$54.95
05-877…..Yamaha HYVO Lower Gear, 1”-15 Spline, 42 tooth ............$54.95
05-878…..Yamaha HYVO Lower Gear, 1”-15 Spline, 43 tooth ............$54.95
FORMULA TO CALCULATE MPH:
RPM ÷ GR x SC ÷ 12 x 60 ÷ 5280 = MPH @ 1:1 clutch ratio
GR = gear ratio (divide top sprocket into bottom sprocket)
SC = sprocket circumference (number of teeth x track pitch)
7T ........................2.52” Pitch ................................17.64
8T ........................2.52” Pitch ................................20.16
9T ........................2.52” Pitch (most OEM) ...........22.68
10T ......................2.52” Pitch ................................25.20
7T .......................2.86” Pitch ................................20.02
8T ........................2.86” Pitch ................................22.88
7T ........................3.0” Pitch ..................................21.00
8T ........................3.0” Pitch ..................................24.00
7T Convolute ......3.29 Pitch .................................23.03
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
Upper
SC
SC
SC
SC
SC
SC
SC
SC
SC
20
Chains & Gears
Order Line 800-883-0294
Link Belt Chains
These 3/4” wide HYVO steel gears convert all Ski-Doo models from ‘93-’07 for use with HYVO Chain. This includes all of
the Summit 1000's and Mach Z 1000's. These gears will not
interchange with any gear that does not use the HYVO
Chain.
Genuine Link Belt Silent Chain is the
best available. Most manufacturers
use and recommend these Link Belt
Chains. All in stock lengths are shown.
Inquire about lengths not listed.
11W Chain
05-600…..11 Link Narrow Chain, 62P ..................................................$39.00
05-602…..11 Link Narrow Chain, 64P ..................................................$39.00
05-604…..11 Link Narrow Chain, 66P ..................................................$39.00
05-606…..11 Link Narrow Chain, 68P ..................................................$39.00
05-608…..11 Link Narrow Chain, 70P ..................................................$42.00
05-610…..11 Link Narrow Chain, 72P ..................................................$42.00
05-612…..11 Link Narrow Chain, 74P ..................................................$42.00
05-615…..11 Link Narrow Chain, 76P ..................................................$46.00
05-616…..11 Link Narrow Chain, 78P ..................................................$46.00
05-617…..11 Link Narrow Chain, 80P ..................................................$46.00
05-618…..11 Link Narrow Chain, 82P ..................................................$49.00
05-619…..11 Link Narrow Chain, 84P ..................................................$49.00
05-620…..11 Link Narrow Chain, 86P ..................................................$49.00
05-621…..11 Link Narrow Chain, 88P ..................................................$49.00
05-614…..11 Link Narrow Chain, 90P ..................................................$49.00
13W Chain
05-630…..13 Link Wide Chain, 62P ....................................................$46.00
05-632…..13 Link Wide Chain, 64P ....................................................$46.00
05-634…..13 Link Wide Chain, 66P ....................................................$46.00
05-636…..13 Link Wide Chain, 68P ....................................................$46.00
05-638…..13 Link Wide Chain, 70P ....................................................$46.00
05-640…..13 Link Wide Chain, 72P ....................................................$49.00
05-642…..13 Link Wide Chain, 74P ....................................................$49.00
05-643…..13 Link Wide Chain, 76P ....................................................$51.00
05-645…..13 Link Wide Chain, 78P ....................................................$51.00
05-646…..13 Link Wide Chain, 80P ....................................................$51.00
05-647…..13 Link Wide Chain, 82P ....................................................$53.00
05-648…..13 Link Wide Chain, 84P ....................................................$53.00
05-649…..13 Link Wide Chain, 86P ....................................................$53.00
05-650…..13 Link Wide Chain, 88P ....................................................$55.00
05-644…..13 Link Wide Chain, 90P ....................................................$55.00
05-626…..13 Link Wide Chain, 100P ..................................................$60.00
05-627…..13 Link Wide Chain, 102P ..................................................$60.00
05-628…..13 Link Wide Chain, 104P ..................................................$62.00
05-629…..13 Link Wide Chain, 106P ..................................................$62.00
05-631…..13 Link Wide Chain, 108P ..................................................$62.00
15W Chain
05-660…..15 Link Extra Wide Chain, 64P............................................$61.00
05-662…..15 Link Extra Wide Chain, 66P............................................$63.00
05-664…..15 Link Extra Wide Chain, 68P............................................$65.00
05-666…..15 Link Extra Wide Chain, 70P............................................$67.00
05-668…..15 Link Extra Wide Chain, 72P............................................$69.00
05-670…..15 Link Extra Wide Chain, 74P............................................$71.00
05-669…..15 Link Extra Wide Chain, 76P............................................$73.00
05-672…..15 Link Extra Wide Chain, 78P............................................$75.00
05-673…..15 Link Extra Wide Chain, 80P............................................$77.00
05-674…..15 Link Extra Wide Chain, 82P............................................$79.00
05-675…..15 Link Extra Wide Chain, 84P............................................$81.00
05-676…..15 Link Extra Wide Chain, 86P............................................$83.00
05-677…..15 Link Extra Wide Chain, 88P............................................$85.00
05-671…..15 Link Extra Wide Chain, 90P............................................$87.00
05-678…..15 Link Extra Wide Chain, 102P........................................$102.00
05-679…..15 Link Extra Wide Chain, 104P........................................$104.00
05-680…..15 Link Extra Wide Chain, 106P........................................$106.00
Ski-Doo HYVO Upper Gear
05-910…..Ski-Doo HYVO Steel Gear, 18 tooth....................................$34.95
05-911…..Ski-Doo HYVO Steel Gear, 19 tooth ....................................$34.95
05-912…..Ski-Doo HYVO Steel Gear, 20 tooth....................................$34.95
05-913…..Ski-Doo HYVO Steel Gear, 21 tooth....................................$34.95
05-914…..Ski-Doo HYVO Steel Gear, 22 tooth....................................$34.95
05-915…..Ski-Doo HYVO Steel Gear, 23 tooth....................................$34.95
05-916…..Ski-Doo HYVO Steel Gear, 24 tooth....................................$34.95
05-917…..Ski-Doo HYVO Steel Gear, 25 tooth....................................$34.95
05-918…..Ski-Doo HYVO Steel Gear, 26 tooth....................................$34.95
Ski-Doo HYVO Bottom Gear
05-925…..Ski-Doo HYVO Steel Gear, 38 tooth....................................$59.95
05-926…..Ski-Doo HYVO Steel Gear, 39 tooth....................................$59.95
05-927…..Ski-Doo HYVO Steel Gear, 40 tooth....................................$59.95
05-928…..Ski-Doo HYVO Steel Gear, 41 tooth....................................$59.95
05-929…..Ski-Doo HYVO Steel Gear, 42 tooth....................................$59.95
05-930…..Ski-Doo HYVO Steel Gear, 43 tooth....................................$59.95
05-932…..Ski-Doo HYVO Steel Gear, 45 tooth....................................$59.95
05-934…..Ski-Doo HYVO Steel Gear, 47 tooth....................................$59.95
HYVO Aluminum Gears
Aluminum HYVO gears reduce rotating mass by 1/3 of the
steel HYVO gears. They fit ‘98 and newer Polaris. You can
also machine the hub to fit into all Yamaha's. These gears
will be used in conjunction with 3/4” wide HYVO chain. Gears
will last longer if you keep a tight chain pitch and use Energy
Release in your chaincase. ER is an additive to your chaincase oil.
05-738…..HYVO Aluminum
05-739…..HYVO Aluminum
05-740…..HYVO Aluminum
05-741…..HYVO Aluminum
05-742…..HYVO Aluminum
05-743…..HYVO Aluminum
05-744…..HYVO Aluminum
05-745…..HYVO Aluminum
05-746…..HYVO Aluminum
05-747…..HYVO Aluminum
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
35T,
36T,
37T,
38T,
39T,
40T,
41T,
42T,
43T,
44T,
1”-15 Spline............................$60.95
1”-15 Spline............................$61.95
1”-15 Spline............................$62.95
1”-15 Spline............................$63.95
1”-15 Spline............................$64.95
1”-15 Spline............................$65.95
1”-15 Spline............................$66.95
1”-15 Spline............................$67.95
1”-15 Spline............................$68.95
1"-15 Spline............................$69.95
7/8” Wide Steel HYVO Gears
7/8” Wide HYVO gears are built solely for use on the
Jackshaft. Use the narrower 3/4”-Wide HYVO on the bottom.
.780” Wide
05-880…
05-882…
05-884…
05-886…
05-887…
05-888…
05-890…
05-892…
05-893…
05-894…
…18 Tooth,
…19 Tooth,
…20 Tooth,
…21 Tooth,
…22 Tooth,
…23 Tooth,
…24 Tooth,
…25 Tooth,
…26 Tooth,
…27 Tooth,
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
Wide
Wide
Wide
Wide
Wide
Wide
Wide
Wide
Wide
Wide
1"-15
1"-15
1"-15
1"-15
1"-15
1"-15
1"-15
1"-15
1"-15
1"-15
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
HYVO Top
HYVO Top
HYVO Top
HYVO Top
HYVO Top
HYVO Top
HYVO Top
HYVO Top
HYVO Top
HYVO Top
Gear
Gear
Gear
Gear
Gear
Gear
Gear
Gear
Gear
Gear
..........$66.45
..........$66.45
..........$66.45
..........$66.45
..........$66.45
..........$77.50
..........$77.50
..........$77.50
..........$83.95
..........$83.95
FORMULA TO CALCULATE CHAIN:
CD X 2
TS + BS
.375
+
2
=
Pitch
CD = Center Distance (Drive Shaft to Jackshaft Centers)
TS = Top Sprocket
BS = Bottom Sprocket
Round number up to even number for proper pitch
21
CHAINS & GEARS
Ski-Doo HYVO Conversion Gears
CHAINS & GEARS/TRACTION
Chains & Gears/Traction & Control
Order Line 800-883-0294
3/4” Wide HYVO Chain
Chain Tensioners
Genuine Borg Warner HYVO Chain.
For use with any 3/4" wide HYVO
Gear. Comes standard in Polaris
snowmobiles. Can be implemented
into almost any application with the right gears.
These chain tensioner assemblies
are like the ones used on our Wahl
Bros. Drag Chassis. Supplied with a
tensioner block or roller assembly,
the adjuster bolt and aluminum
bracket. Fastens to side of machine using 1/4” bolts. For
open chaincase applications, but components can be implemented into a closed application.
05-790…..HYVO
05-791…..HYVO
05-792…..HYVO
05-793…..HYVO
05-794…..HYVO
05-795…..HYVO
05-796…..HYVO
05-803…..HYVO
05-801…..HYVO
05-797…..HYVO
05-798…..HYVO
05-799…..HYVO
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
Chain,
66P ................................................................$79.95
68P ................................................................$79.95
70P ................................................................$84.95
72P ................................................................$84.95
74P ................................................................$84.95
76P ................................................................$84.95
78P ................................................................$89.95
82P ................................................................$89.95
86P ................................................................$89.95
90P ................................................................$89.95
92P ..............................................................$105.95
94P ..............................................................$105.95
Tensioner Assemblies
05-808A…Tensioner Assembly, Roller ................................................$79.95
05-810A…Tensioner Assembly, Plastic Block ......................................$49.95
Replacement Parts
05-800…..Tensioner Block, Plastic ......................................................$19.75
05-802…..Tensioner Roller Steel Bracket ............................................$17.50
05-804…..Tensioner Roller, w/Torrington Needle Bearing, 1 1/8” OD..$27.95
05-806…..Tensioner Pivot Shaft, 1/4” Hole ..........................................$13.95
Traction & Control
7/8” Wide HYVO Chain
7/8” wide Borg Warner HYVO chain is the same chain used
in the Polaris IQ racer. The strength and integrity of this chain
is unlike anything that has been available to racers in the
past. At Wahl Brothers, we feel that this chain is the ticket for
racers that are building the high hp sleds. Available in 5
lengths, we can custom build as well. 15 plates wide.
05-899…..70P,
05-900…..72P,
05-902…..74P,
05-904…..76P,
05-906…..78P,
Drag Eliminator Studs
This is a highly aggressive heat treated alloy steel
with a sharp 30 degree point. Its body is extremely
tapered for the penetration required for drag racing
on the hardest ice. The threads are only .270” long
so the stud will not interfere with suspension
wheels on thin belted tracks. They work great on
cleated tracks.
7/8” Wide HYVO Chain..............................................$143.95
7/8" Wide HYVO Chain..............................................$143.95
7/8" Wide HYVO Chain..............................................$143.95
7/8” Wide HYVO Chain..............................................$143.95
7/8" Wide HYVO Chain..............................................$143.95
Link Belt
1/4”-20 Thread, 48 pc.
04-440…..Drag Eliminator, DEL-7000, 48 pc., .700”............................$48.95
04-442…..Drag Eliminator, DEL-8750, 48 pc. .875” ............................$48.95
04-444…..Drag Eliminator, DEL-1000, 48 pc., 1.00”............................$48.95
Hyvo
Anti-Friction Metal
Conditioner
Competition Eliminator Studs
A thin profile, heat treated alloy steel stud for all types
of ice racing. It's a lightweight ice pick with a 30
degree point. The thread length is .370” for use on
rubber tracks.
The first true anti-friction metal conditioner, ER treats the metal not the
lubricant. ER forms smooth surfaces
at heat and friction points, dramatically reducing friction and
wear between moving metal parts. Apply directly to gears,
chains, bearings, and crankcases or directly to your transmission or motor oil. Great additive for your chaincase!
1/4”-20 Thread
04-599…..GEL-6000, 1/4"-20 Steel Stud, 48 pc, .600” ........................$59.95
04-381…..GEL-7000, 1/4"-20 Steel Stud, 48 pc, .700” ........................$48.95
04-385…..GEL-7500, 1/4"-20 Steel Stud, 48 pc, .750” ........................$48.95
04-387…..GEL-8200, 1/4"-20 Steel Stud, 48 pc, .820” ........................$48.95
04-388…..GEL-8750, 1/4"-20 Steel Stud, 48 pc, .875” ........................$48.95
04-392…..GEL-9200, 1/4”-20 Steel Stud, 48 pc, .920” ........................$48.95
04-398…..GEL-1060, 1/4”-20 Steel Stud, 48 pc, 1.060” ......................$48.95
04-471…..GELX-1060, 1/4”-20 Steel Stud, 48 pc, 1.060”, Snap-Off....$70.95
7mm Thread
04-390…..GEL-8757, 7mm Steel Stud, 48 pc, .875” ............................$48.95
04-395…..GEL-1067, 7mm Steel Stud, 48 pc, 1.060” ..........................$48.95
04-400…..GEL-1200, 7mm Steel Stud, 48 pc, 1.200” ..........................$48.95
09-420…..Energy Release, 5 oz ............................................................$9.99
09-422…..Energy Release, 16 oz ........................................................$24.99
09-424…..Energy Release, gal. ........................................................$169.00
22
Traction & Control
Order Line 800-883-0294
Super Pick Carbide Studs
Standard T-Nuts
The Super Pick stud has a sharp 40 degree carbide
point and a tapered, thin profile body for deep penetration. This is a race competition stud.
The original T-nut is available with a 3/4”
head or 1” head. Barrel length of the 04-664
is .187” while all others are .230” long. The
Extreme Service T-nut is heat treated which
does not strip out easily.
1/4”-20 Thread
04-200…..Super
04-202…..Super
04-204…..Super
04-206…..Super
Pick,
Pick,
Pick,
Pick,
GSR-7000,
GSR-7500,
GSR-8750,
GSR-9200,
48
48
48
48
pc,
pc,
pc,
pc,
.700”
.750”
.875”
.920”
..................$78.85
..................$78.85
..................$78.85
..................$78.85
Wide Body Chisel Tooth
With a 37% increase in flat surface grabbing area
over standard chisels, this stud has proven itself in
the field to be a must for winning drag races. The
hardened, flat steel blade penetrates and grabs in
soft or loose track conditions. The length is 1.060”,
making them legal for use on .525” tracks. T-nut
style, the thread is 7mm.
Dished Head T-Nuts
The newest T-nut from Woody’s utilizes
thicker metal to resist stripping and allows
tighter thread tolerance.
04-666…..3/4” T-Nut, ATD-7500, 1/4” thread, 48 pc. ..........................$29.95
04-667…..15/16” T-Nut, ATD-9380, 1/4”-20 Thread, 48 pc. ................$29.95
04-670…..15/16” T-Nut, ATD-9387, 7mm Thread, 48 pc. ....................$29.95
04-493…..Wide Body Chisel, CWB-1060, 48 pc., 1.060” ..................$77.95
Steel Chisel Tooth Studs
Stud Bolts
The race proven T-nut chisel tooth stud is the
secret to winning grass and ice. Its flat blade penetrates and grabs the surface material for maximum
traction. This is the most aggressive single point
stud available and it works like a scooper stud but
with much greater penetration.
1/4”-20 Thread
04-484…..Chisel Tooth,
04-486…..Chisel Tooth,
04-488…..Chisel Tooth,
04-490…..Chisel Tooth,
CLT-7000,
CLT-7500,
CLT-8750,
CLT-1000,
7MM Thread
04-491…..Chisel Tooth,
04-475…..Chisel Tooth,
04-492…..Chisel Tooth,
04-476…..Chisel Tooth,
CLT-1060, 48 pc, 1.060” ................................$66.95
CLTX-1060, 48 pc, 1.060”, Snap-Off ............$93.95
CLT-1200, 48 pc, 1.200” ................................$66.95
CLTX-1200, 48 pc, 1.200”, Snap-Off ............$93.95
48
48
48
48
pc,
pc,
pc,
pc,
Stud bolts are used to fasten stud
plates in cleated tracks.The 10-32
fasteners have a 5/8” head.
04-678…..Stud Bolts, 1/4”-20 x 3/8”, 100 pc. ......................................$10.50
04-680…..Stud Bolts, 1/4”-20 x 1/2”, 100 pc. ......................................$10.50
04-681…..Stud Bolts, 10-32 x 5/8”, Includes Nuts, 100 pc. ................$10.95
.700” ..................................$66.95
.750” ..................................$66.95
.875” ..................................$66.95
1.00” ..................................$66.95
Header Bolts
Header bolts have 3/16” hex in bottom to hold bolts while
tightening. Parts are 5/8” long and come with 1/4”-20 thread
only. Sold in packs of 48 and include lock washer nuts. Used
primarily for cleated track applications.
04-083…..Header Bolts, HDB-P-6, 48 pc.............................................$24.95
Dished 7/8” T-Nuts
Hooker Studs
The cup shaped 7/8” diameter T-nut helps
trap the track rubber for more stud support.
This T-nut has a standard 7mm thread
barrel.
Steel Hooker Eliminator
A short threaded stud for use in hooker plates.
This stud is used on hard ice. Its 30 degree
taper is for deep penetration. HCL-8000 is a
chisel tooth stud.
04-663... ..Hardened 7/8” Dished T-Nut, ATDH-3875, 7mm, 48 pc. ....$27.95
1/4"-20 Thread
04-550 ....Steel Hooker
04-552 ....Steel Hooker
04-554 ....Steel Hooker
04-556 ....Steel Hooker
04-558 ....Steel Hooker
04-560 ....Steel Hooker
04-562 ....Steel Hooker
04-564 ....Steel Hooker
23
Eliminator,
Eliminator,
Eliminator,
Eliminator,
Eliminator,
Eliminator,
Eliminator,
Eliminator,
HST-4400, 48 pc., .440”................$49.95
HST-5000, 48 pc., .500”................$49.95
HST-5751, 48 pc., .575”................$49.95
HST-5761, 48 pc., .675”................$49.95
HEP-7500, 48 pc., .750” ..............$49.95
HEP-8000, 48 pc., .800” ..............$49.95
HEP-9000, 48 pc., .900” ..............$49.95
Chisel HCL-8000, 48 pc., .800” ....$68.95
TRACTION & CONTROL
Standard T-Nuts
04-664…..3/4” T-Nut, Short, ATB-3825, 1/4” thread, 48 pc. ..................$8.95
04-660…..3/4” T-Nut, ATR-3750, 1/4”-20 Thread, 48 pc. ......................$8.95
04-668…..1” T-Nut, ATL-3810, 1/4”-20 Thread, 48 pc. ........................$15.95
04-672…..1” T-Nut, ATL-3820, 7 mm Thread, 48 pc. ..........................$15.95
Extreme Service T-Nuts
04-661…..3/4” Hardened T-Nut, ATRH-3750, 1/4”-20 Thread, 48 pc...$13.95
04-669…..1” Hardened T-Nut, ATLH-3810, 1/4”-20 Thread, 48 pc. ....$20.95
04-673…..1” Hardened T-Nut, ATLH-3820, 7mm Thread, 48 pc. ........$20.95
TRACTION & CONTROL
Traction & Control
Order Line 800-883-0294
Hooker Plates
Eliminator Steel Traction Masters
Available in the angle style or the original
flat. Welded onto track clips, they are used
for mounting studs under the slide rails for
tremendous traction. 1/4”-20 thread. The
angle hooker plate can be installed at various angles up to 15 degrees.
A unique 30 degree point penetrates
the hardest ice. This narrow profiled
push-through stud is designed for all
competition requirements.
Flat Style
04-582A.....Hooker Plate, 48 pc, 1 Hole ..............................................$37.50
04-583A.....Hooker Plate, 48 pc, 2 Hole ..............................................$39.95
04-584A.....Hooker Plate, 48 pc, 3 Hole ..............................................$54.95
Angled Style
04-579A.....Angled Hooker Plate, 48 pc, 1 hole ..................................$44.95
04-580A.....Angled Hooker Plate, 48 pc, 2 hole ..................................$49.95
1/4”-28 Thread
04-504…..Eliminator Traction Master, GEP-7000, 48 pc, .700” ..........$81.95
04-506…..Eliminator Traction Master, GEP-7500, 48 pc, .750” ..........$81.95
04-508…..Eliminator Traction Master, GEP-8750, 48 pc, .875” ..........$81.95
04-510…..Eliminator Traction Master, GEP-9200, 48 pc, .920” ..........$81.95
04-512…..Eliminator Traction Master, GEP-1000, 48 pc, 1.00” ..........$81.95
04-514…..Eliminator Traction Master, GEP-1060, 48 pc, 1.060” ........$81.95
7 MM Thread
04-520…..Drag Eliminator Traction Master, GEP-1207, 48 pc, 1.200” $81.95
Hooker Washers
Steel Traction Master Studs
Specifically designed high strength
star washer is required for mounting
hooker studs. They can also be used
for securing regular studs.
This push-through stud is very popular
because it offers no T-nut installation. Its 60
degree point is aggressive on hard packed
snow, plus it is more economical than carbide
studs. The 7 mm thread body and 7/8” diameter support head are heat treated. Lock nuts
included.
04-590…..Hooker Washer, HSW-4800, 48 pc., 1/4" ID, .025” Thick......$4.95
04-592…..Hooker Washer, HSW-4900, 48 pc., 7mm ID, .032” Thick ....$5.35
Shim Washers
04-500…..Traction Master, GSP-8750, 48 pc, .875” ..........................$51.95
04-502…..Traction Master, GSP-1000, 48 pc, 1.00” ............................$51.95
Use these shim washers to fine tune
desired stud height. For 1/4” studs, use
aluminum shims. For 7mm studs, use
the steel. 48 shims per package.
Thickness is .063”
Steel Chisel Tooth
Traction Masters
If you want easy installation and awesome results, then these are the chisels you want. The hook-up on grass
and ice is phenomenal. The smaller 1/4"-28 chisel was
designed for use on cleated tracks, but can be used in rubber
track applications. 04-4721 & 04-4722 have a 15/16” Head.
04-620…..Shim Washer, ASW-4000, 7mm, Steel, 48 pc. ......................$3.99
04-650…..Shim Washer, ASW-3950, 1/4", Aluminum, 1/4”, 48 pc. ........$3.95
Pro-Racer Studs
Wahl Bros. Pro-Racer studs are the most
aggressive cornering stud for cleated tracks.
Machined from tool steel and heat treated
through so it can be re-sharpened. Directional
design gives tremendous control in the corners under all
track conditions.
1/4"-28
04-481
Chisel Tooth Traction Master, CEP-1060, 48 pc., 1.060”
7mm......................................................................................$86.95
04-485 Chisel Tooth Traction Master, CAP-7500, 48 pc., .750” ......$86.95
04-479 Chisel Tooth Traction Master, CAP-9200, 48 pc., .920” ......$86.95
04-480 Chisel Tooth Traction Master, CAP-1000, 48 pc., 1.00” ......$86.95
04-483 Chisel Tooth Traction Master, CAP-1060, 48 pc., 1.060” ....$86.95
04-482 Chisel Tooth Traction Master, CAP-1200, 48 pc., 1.200” ....$86.95
5/16”-24 (Below include Big Nuts)
04-472 Chisel Tooth Traction Master, CAP-1325-S,
48 pc., 1.325”........................................................................$81.95
04-4721 Chisel Tooth Traction Master, CAP-1630-S,
48 pc., 1.630”......................................................................$110.95
04-4722 Chisel Tooth Traction Master, CAP-1860-S,
48 pc., 1.860”......................................................................$110.95
04-074…..Pro-Racer Studs, 3-point, 12 pc...........................................$93.50
Lock Nuts
Nyloc lock nuts are great for ensuring that those push
through studs or smaller chassis bolts stay put. Sold
in three different sizes, they come 48 to a pack.
04-686…..Lock Nuts, NYL-5000, 7mm, 48 pc. ......................................$8.95
04-690…..Lock Nuts, NYL-5010, 1/4''-28, 48 pc. ..................................$8.95
04-694…..Lock Nuts, NYL-5020, 5/16''-24, 48 pc. ................................$8.95
Big Nut
Aluminum Nuts
Use Woody’s newest traction accessory, the Big
Nut, for maximum support on the longest of
studs. The short Big Nut is 1/2” long while the
longer Big Nut is 3/4” long. Big Nuts are aluminum with 5/16” thread.
For use on track or trail. For 1/4”, 7mm and
5/16” push through studs. Half the weight of
steel nuts. Heat treated aluminum, very
durable. Sold in quantities of 50.
04-134.....Woody’s
04-136.....Woody’s
04-137.....Woody’s
04-138.....Woody’s
04-797…..Aluminum Nuts, 1/4"-28 Thread, 50 pc. ..............................$16.45
04-798…..Aluminum Nuts, 5/16”-24 Thread, 50 pc. ............................$16.45
04-799…..Aluminum Nuts, 7mm Thread, 50 pc. ..................................$16.45
24
Big
Big
Big
Big
Nut,
Nut,
Nut,
Nut,
short, ALN2-4500, 24 pc. ........................$11.95
short, ALN2-4500-B, 96 pc. ....................$43.95
long, ALN2-7000, 24 pc. ..........................$11.95
long, ALN2-7000-B, 96 pc. ......................$43.95
Traction & Control
Order Line 800-883-0294
5/16” Mega-Bite,
Multi-Directional
Roetin Thrusters
The Thruster features a flat face which is also
angled rearward at 4 degrees for more aggressive thrust. 5/16” lock nuts are included.
Available in 96 packs. Legal length for ISR racing with a .525” lug height track.
A unique multi-directional stud with four flat surfaces on the 5/16” shank for additional contact
surface that provides enhanced deceleration
and acceleration. This hardened stud has a
15/16” head and a 60º carbide tip. Sold with
lock nuts or Big Nuts depending on length.
04-087.....1.180” Thrusters, 5/16” Thread, 96 pc. ..............................$199.00
Grand Master Stud
Woody’s Grand Master with a larger 1.200”
head provides a larger anchor to distribute
pressure over a wider area on the single ply
track. Available in two stud lengths, 1.075” with
standard nuts and the 1.325” with Big Nuts.
04-164.....Grand
04-165.....Grand
04-166.....Grand
04-167.....Grand
04-168.....Grand
04-169.....Grand
1.075”,
1.075”,
1.075”,
1.325”,
1.325”,
1.325”,
12
48
84
12
48
84
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
............$28.95
..........$114.95
..........$195.95
............$32.95
..........$129.95
..........$219.95
Woody’s Grand Digger single support
plates are designed for the 1.200” head
of the Grand Master Studs.
Sharp 60 degree carbide point for superb
trail traction on hard pack snow and ice.
Long lasting durability. All are 5/16” shank
and come with a larger 1” head for use on
rubber tracks. Sold with lock nuts.
Master,
Master,
Master,
Master,
Master,
Master,
Master,
Master,
GMP-1075-12,
GMP-1075-48,
GMP-1075-84,
GMP-1325-12,
GMP-1325-48,
GMP-1325-84,
Grand Digger Square
Support Plate
Gold Digger Carbide
Traction Master
04-300…..Traction
04-302…..Traction
04-306…..Traction
04-308…..Traction
04-320…..Traction
04-322…..Traction
04-321…..Traction
04-323…..Traction
Master Stud,
Master Stud,
Master Stud,
Master Stud,
Master Stud,
Master Stud,
04-6501...Grand Digger Square Single Plate, ASG-3775-12, 12 pcs. ..$8.95
04-6502...Grand Digger Square Single Plate, ASG-3775-48, 48 pcs. $32.95
04-6503...Grand Digger Square Single Plate, ASG-3775-84, 84 pcs. $54.95
Grand Digger Round
Support Plate
GDP6-1075, 24 pc, 1.075” ........................$50.95
GDP6-1075-B, 96 pc, .1.075” ................$201.95
GDP6-1175, 24 pc, .1.175” ......................$50.95
GDP6-1175-B, 96 pc, .1.175”..................$201.95
GDP6-1325, 24 pc., 1.325'’ ......................$57.95
GDP6-1325-B, 96 pc., 1.325'' ................$228.95
GDP6-1450, 24 pc, 1.450” ........................$57.95
GDP6-1450-B, 96 pc, 1.450” ..................$228.95
Woody’s Grand Digger single support
plates are designed for the 1.200” head of the Grand Master
Studs.
04-6505...Grand Digger Round Single Plate, ARG-3775-12, 12 pcs. ....$8.95
04-6506...Grand Digger Round Single Plate, ARG-3775-48, 48 pcs. ..$32.95
04-6507...Grand Digger Round Single Plate, ARG-3775-84, 84 pcs. ..$54.95
Trigger Lake Racer Stud
The Trigger™ has a long and narrow profile for
unmatchable penetration on lake ice. The 1.630"
stud has a 5/16" shank with Woody's sharp 60°
carbide tip. The overall installed height is 1.88".
Woody's Big Nuts are included in the packages
of 48 pieces
Grand Digger Double
Support Plate
Woody’s Double Grand Digger support plates are designed for the
1.200” head of the Grand Master Studs. The addition of a
dual configuration provides additional studding options in the
middle belt. For Single Ply Tracks
04-495…..Trigger Stud, TRIG-1630-S, 1.630”, 48pcs. ......................$127.95
04-6508...Grand Digger Double Plate, ADG-3775, 12 pcs...................$18.95
04-6509...Grand Digger Double Plate, ADG-3775-48, 48 pcs. ............$73.95
25
TRACTION & CONTROL
Studs with Lock Nuts
04-140.....Mega-Bite, MEG-1005, 24 pc, 1.00” ....................................$43.95
04-141.....Mega-Bite, MEG-1005-B, 96 pc, 1.00” ..............................$170.95
04-142.....Mega-Bite, MEG-1075, 24 pc, 1.075” ................................$43.95
04-143.....Mega-Bite, MEG-1075-B, 96 pc, 1.075” ............................$170.95
04-144.....Mega-Bite, MEG-1175, 24 pc, 1.175” ..................................$43.95
04-145.....Mega-Bite, MEG-1175-B, 96 pc, 1.175” ............................$170.95
Studs with Short Big Nuts
04-150.....Mega-Bite, MEG-1325-S, 24 pc., 1.325” ..............................$50.95
04-151.....Mega-Bite, MEG-1325-BS, 96 pc., 1.325” ........................$197.95
04-152.....Mega-Bite, MEG-1450-S, 24 pc., 1.450” ..............................$50.95
04-153.....Mega-Bite, MEG-1450-BS, 96 pc., 1.450”..........................$197.95
Studs with Long Big Nuts
04-155.....Mega-Bite, MEG-1575-L, 24 pc, 1.575” ..............................$50.95
04-157.....Mega-Bite, MEG-1575-BL, 96 pc., 1.575” ..........................$197.95
04-160.....Mega-Bite, MEG-1740-L, 24 pc., 1.740” ..............................$50.95
04-161.....Mega-Bite, MEG-1740-BL, 96 pc., 1.740” ..........................$197.95
Traction & Control
Order Line 800-883-0294
Square Aluminum
Support Plates
Angled Aluminum
Double Digger
Support Plates
TRACTION & CONTROL
Aluminum plates give excellent support
with less weight. 7mm aluminum plates
are .125” thick and the 5/16” aluminum
plates are .145” thick. Strong, dependable and great for
knocking off some extra track weight!
The Woody's exclusive 7° angle design and the double digger plates offer the best stud rigidity and penetration.
Available in aluminum 5/16” and 7mm. Do the “Double Dig.”
04-6430…..Double
04-6431…..Double
04-6432…..Double
04-6433…..Double
7mm Plates
04-630…..Square Aluminum Plate, ASW-3725, 24 pc., Aluminum ......$12.95
04-632…..Square Aluminum Plate, ASW-3725-B, 96 pc., Aluminum ..$46.95
04-633…..Square Aluminum Plate, ASW-3725-C, 144 pc., Aluminum $66.95
5/16” Plates
04-636.....Square Aluminum Plate, ASW2-3775, 24 pc., Aluminum ....$14.95
04-638.....Square Aluminum Plate, ASW2-3775-B, 96 pc., Aluminum $54.95
Plate,
Plate,
Plate,
Plate,
7mm, 12 pc.
7mm, 48 pc.
5/16”, 12 pc.
5/16”, 48 pc.
..........$18.95
..........$70.95
..........$18.95
..........$70.95
These flat stud plates work great on the 13
1/2” tracks where there isn’t room for a normal double stud plate on the outside belt.
Increase the stud length .100” as compared
to a Woody’s Support Plate. Sold individually.
04-736…..Flat Aluminum
04-737…..Flat Aluminum
04-738…..Flat Aluminum
04-739…..Flat Aluminum
04-740…..Flat Aluminum
04-741…..Flat Aluminum
Double Digger Plates feature a dual stud configuration that
will offer more stud rigidity with less weight than two single
aluminum plates. They are for use with 5/16” and 7mm studs.
The mounting holes are spaced the same as Bender Plates.
Digger
Digger
Digger
Digger
Support
Support
Support
Support
Flat Aluminum Stud Plates
Double Digger
Aluminum Support
Plates
04-716…..Double
04-717…..Double
04-718…..Double
04-719…..Double
Digger Angled
Digger Angled
Digger Angled
Digger Angled
Stud
Stud
Stud
Stud
Stud
Stud
Plate,
Plate,
Plate,
Plate,
Plate,
Plate,
Single ............................................$.95
Dual, 1 1/2” wide ........................$1.35
Dual, 1 5/8” wide ........................$1.35
Dual, 1 3/4” wide ........................$1.35
Dual, 1 7/8” wide ........................$1.35
Dual, 2” wide ..............................$1.35
Bender Stud Mates
Plates, ADD-3725, 12 pc., 7mm ..................$13.95
Plates, ADD-3725-B, 48 pc., 7mm ..............$53.95
Plates, ADD-3775, 12 pc., 5/16” ..................$13.95
Plates, ADD-3775-B, 48 pc., 5/16” ..............$53.95
Its 45 degree angle lies flush against the
track and the track lug holding the stud
rigid for maximum traction. Available in
one hole or two hole.
Triangle Digger Support
Plates
04-642…..Aluminum
04-644…..Aluminum
04-646…..Aluminum
04-648…..Aluminum
For the trail rider looking for added performance. When studding a track using these support plates, the unique shape generates less rotating resistance. Available in 7mm and 5/16” aluminum.
Stud
Stud
Stud
Stud
Mate,
Mate,
Mate,
Mate,
7mm, AWL-2700, 1-hole, 12 pc........$12.95
7mm, AWL-2700-B, 1-hole, 48 pc. ..$47.95
7mm, AWL-3750, 2-hole, 12 pc. ......$15.95
7mm, AWL-3750-B, 2-hole, 48 pc. ..$58.95
Round Support Plates
Round dome shaped plates in aluminum.
Available in 7mm only.
04-629…..Triangle Digger Aluminum Support Plate, 7mm, 48 pc. ......$34.95
04-631…..Triangle Digger Aluminum Support Plate, 5/16”, 48 pc. ....$34.95
04-634…..Round Aluminum Plate, AWA-3700, 24 pc. ........................$12.95
04-635…..Round Aluminum Plate, AWA-3700-B, 96 pc.......................$46.95
Angled Support Plates
Woody's Traction Accessories
Placed at a 7 degree angle for effortless
penetration and support. This new line of
Woody's aluminum angled support plates is
designed for grass drag and ice racing alike.
Available in both 7mm and 5/16”.
T-Nut Tool
The T-Nut Tool attaches to your ratchet or impact
wrench allowing the t-nut to be easily pulled into
the track before installation.
24 pack
04-645......5/16” Angled Support Plates, 24 pc., ANG-3775 ................$17.95
04-6451....7mm Angled Support Plates, 24 pc. ANG-3725 ................$16.95
96 pack
04-647......5/16" Angled Support Plates, 96 pc. ANG-3775-B ..............$68.95
04-6471....7mm Angled Support Plates, 96 pc. ANG-3725-B ..............$63.95
144 pack
04-649......5/16” Angled Support Plates, 144 pc. ANG-3775-C ..........$100.95
04-6491....7mm Angled Support Plates, 144 pc. ANG-3725-C ............$94.95
04-702…..Woody's T-Nut Tool, 1/4”-20, ATT-4290 ..............................$14.95
04-703…..Woody's T-Nut Tool, 7mm, ATT-4280 ..................................$14.95
Spec Gauge
Race Legal installation of studs and carbide
runners in oval, drag and snocross racing
need precise measurements. The Spec Gauge
conforms to ISR regulations. No Racer should
be without one.
04-704…..Woody's Spec Gauge, ASG-4100-1 ....................................$14.95
26
Traction & Control
Order Line 800-883-0294
Woody’s Executive
Series Runners
Track Saver Tool
This tool is invaluable for removing or
installing dished T-nuts. Three pins fit the Tnut slots (or holes) and hold it firmly. The tool
snaps onto any 3/8" drive ratchet. Will work
on 3/4” T-Nuts with modification.
Here is a beefy 1/2” thick runner
with lots of turning carbide.
Super-aggressive trail riders are known to use this runner. 8”
of 60 degree carbide translates into extreme turning power.
Woody's recommends that you have 144 to 192 studs in your
track when using these runners.
04-705…..Woody's Track Saver Tool, 7/8” Dished T-Nut, ATT-3875....$22.95
Executive Arctic
04-854.....Executive, WAT-9750, Arctic Composite Ski ........................$90.95
04-856.....Executive, WAT-9975, Arctic, ‘02 - Present ZR, F & M
Series, Jaguar & Crossfire ..................................................$90.95
Executive Polaris
04-874…..Executive, WPI-1225, Polaris, All Indys/XC Composite
‘97-’06, all IQ Chassis except dual runner ..........................$90.95
04-710…..Woody's Track Marker, TRAK-MARK ....................................$7.95
Ultra Series
Stud Hole Drill
The hollow drill for 1/4", 7mm or 5/16”
studs cores a precise opening for installing studs. Use the
1/4” bit for the 1/4” & 7mm applications and the 7mm bit for
5/16” studs.
This premium performance carbide
runner is designed for only the most
aggressive trail and cross country racers who demand superb cornering
control. The 5/8” bar with 10” of turning carbide and a 60degree cutting edge provides maximum control. You must be
studded properly to use this runner.
04-711…..Woody's Track Cutter, 1/4”, DRIL-1/4” ................................$10.95
04-712…..Woody's Track Cutter, 7mm, DRIL-7mm ............................$10.95
Stud Cutters
04-886.....UAT-9975, Arctic Cat, ‘02 Present ZR, F & M Series,
Jaguar, Crossfire ................................................................$114.95
04-887.....UYV-6580, Yamaha, ’01-Present, Vmax, SX Venom &
Viper, Phazer, Rx1, Nytro, Apex & Attack ..........................$114.95
With this stud cutter there is no need to
remove your studs. You can sharpen
them right on the machine using a drill
and this tool. It can accurately cut 30 or
45 degree points. Its four chip-resistant, precision inserts can
be rotated eight times for long lasting durability. Replacement
inserts are available.
Competition Carbides
Competition carbides are designed
for serious oval racing. When used
with heavily studded tracks, this carbide runner keeps the front end from “pushing” during high
speed cornering. These top-of-the-line Woody's carbide runners have been race proven for serious competition. Wahl
Bros. use the 04-928 and the 04-956 Twin Track Ski-Doo carbide on their Champ skis. Sold as pairs, all have 60 degree
carbides.
Stud Cutters
04-961.....Stud Cutter, 30 Degree ........................................................$67.50
04-962.....Stud Cutter, 45 Degree ........................................................$67.50
Replacement Inserts
04-964A...Replacement Inserts, 30, 45 & 60 Degree ..........................$21.75
6” Carbides
04-924…..Competition
10” Carbides
04-928…..Competition
04-931…..Competition
04-927…..Competition
14” Carbides
04-956…..Competition
Custom Studding
Templates
Available in three different widths,
Wahl Bros. offers blank 2.52” Pitch
studding templates that will allow
you to configure your own template that you can save and
keep for future use. We offer them for 13.5”, 14” and 15”
wide tracks. Made of 14 gauge steel, these templates will last
longer than the sled. Designed to allow you to first mark out
your desired stud pattern, you can then drill holes through the
template that allow you to mark the track easily and quickly.
Come in 6-bar patterns.
Carbide (F-500), CSD-5066-1, 6”, Oval ........$127.50
Carbide, CSD-5060, 10”, Oval ......................$139.95
Carbide, USI-1060, Flatline 10”, Four Bolt ....$139.95
Carbide for Northstar Ski, 10”........................$139.95
Carbide, CSD-5050, 14”, Oval ......................$157.95
Wahl Kicker Bars
A lightweight aluminum bar that mounts
under the slide rail of your cleated track
suspension. The studs are offset in bar
which allows for eight lines of traction. Equivalent to a 1”
stud. Includes bar with studs and mounting bolts.
Kicker Bars
04-570A….Kicker Bar w/Studs and Fastening Bolts, ea. ......................$4.50
04-572.…..Aluminum Kicker Bar Only, ea. ............................................$2.95
Components
04-666…..Dished T-Nut, ATD-7500, 1/4”-20, 3/4” Head, 48 pc. ........$29.95
04-664…..Short Barreled T-Nut, ATB-3825, Short, 1/4''-20, 48 pc. ......$8.95
04-558…..30 Degree Stud, HEP-7500, 1/4”-20 thread, .750”, 48 pc. ..$49.95
01-099…..1/4" - 20 x 5/8" FHCS, Mounting Bolt ....................................$.20
Templates
04-687…..Blank Stud Template, 13 1/2" Wide ....................................$16.95
04-688…..Blank Stud Template, 14” Wide............................................$16.95
04-689…..Blank Stud Template, 15” Wide............................................$16.95
Track Cutters
04-711…..Woody's Track Cutter, 1/4" ..................................................$10.95
04-712…..Woody's Track Cutter, 7mm ................................................$10.95
27
TRACTION & CONTROL
Track Marker
An excellent tool for marking stud patterns on your track. Easily draws on
rubber.
Traction & Control
Order Line 800-883-0294
Carbide Grinder Stand
Backing Plates
TRACTION & CONTROL
This is the same machine we use to sharpen our skags. It is fully adjustable to match
any angle that you may want your runners
to be. Welding is required as legs are not
attached for shipping. We recommend a 3/4
H.P. grinder with a 7” x 1” green wheel. A silicon carbide grinding wheel, also known as
a green wheel, is necessary for sharpening carbide.
04-634…..Round Aluminum Plate, AWA-3700, 24 pcs.........................$12.95
04-635…..Round Aluminum Plate, AWA-3700-B, 96 pcs. ....................$46.95
Carbides
Available for Kitty Cats and
120’s. All are 60 degree carbides
and are available in 4”, 5” and 6”
depending on model. Additional
holes in ski may be required.
Oval runners may be adapted to other brand skis. Sold as
pairs.
Stand
04-997…..Carbide Grinder Stand, only ..............................................$225.00
Components
04-998…..Green Wheel, 6” x 1” ..........................................................$32.00
04-999…..Green Wheel, 7” x 1” ..........................................................$34.00
04-994…..Replacement Plastic Jig Bushings, pr. ................................$16.00
Sno-Cross
Grinding Wheel Dresser
04-581…..Carbide Runner, SXP-1200, 4” Polaris ................................$70.95
04-589…..Carbide Runner, SXA-1200, 4” Arctic ..................................$70.95
04-591…..Carbide Runner, SXS-1200, 4” Ski-Doo ..............................$70.95
A simple tool for removing the glaze and
keeping your grinding wheel true. Really
speeds up grinding carbides.
Oval
04-581…..Carbide
04-595…..Carbide
04-587…..Carbide
04-597…..Carbide
04-598…..Carbide
04-996…..Grinding Wheel Dresser ......................................................$21.00
Mini 120's and Kitty Cat's
Competition accessories designed for the Mini 120's and Kitty
Cats. Children start their racing careers almost as soon as
they can walk. Start them with the best traction products
available.
The 10” carbide runner designed for USI's Flatliner racing ski
can be shortened to any length desired. Sold in pairs.
04-931…..Carbide Runner, USI-1060, 10”-60 Degree ......................$139.95
04-930…..Carbide Runner, USI-1070, 3”-120 Degree ........................$45.00
Push through & t-nut style studs for
your mini racer. Woody’s recommends
using round backers. Oval studs are 30 degree steel with
Sno-X studs being 60 degree carbide.
Sno-X
04-276…..Traction Master, GDP6-8750, 24 pc., .875”, Push-Thru ......$50.95
Oval Push-Thru
04-508…..Eliminator Traction Master, GEP-8750, 48 pc., .875” ..........$81.95
04-506…..Eliminator Traction Master, GEP-7500, 48 pc., .750” ..........$81.95
04-504…..Eliminator Traction Master, GEP-7000, 48 pc., .700” ..........$81.95
T-Nut Style Studs
The 04-594 stud package includes 24 studs, backers
and t-nuts. All are 30 degree.
Steel
Steel
Steel
Steel
Stud,
Stud,
Stud,
Stud,
SXP-1200, 4” Polaris ................................$70.95
CAT-3000, 5” Arctic ..................................$84.95
CAT-4000-1, 6” Arctic ..............................$84.95
MIN-6000, 5” Ski-Doo ..............................$84.95
MIN-5000, 4”& 6” Ski-Doo ........................$84.95
USI Carbides
Studs
04-599.....Eliminator
04-381.....Eliminator
04-385.....Eliminator
04-594.....Eliminator
Runner,
Runner,
Runner,
Runner,
Runner,
GEL-6000, 48 pcs., .600”......$59.95
GEL-7000, 48 pcs., .700”......$48.95
GEL-7500, 48 pcs., .750”......$48.95
DEL-8000, 24 pcs., .800”......$45.95
T-Nuts
Available in the standard version and also
heat treated. The threaded barrel on the
short t-nut is .187” while the others are
.230” long.
04-664…..3/4” T-Nut, Short, ATB-3825, 48pcs. ......................................$8.95
04-666…..3/4” Dished T-Nut, ATD-7500, 48pcs. ..................................$29.95
04-660…..3/4” T-Nut, ATR-3750, 48 pcs. ..............................................$8.95
04-661…..3/4” T-Nut, Hardened, ATRH-3750, 48pcs. ..........................$13.95
04-667…..15/16” Dished T-Nut, ATD-9380, 48 pcs. ............................$29.95
28
Skis & Steering
Order Line 800-883-0294
Skis & Steering
North Star Vintage
Racing Skis
IFS Drag Skis
These leaf spring skis are stronger
for oval racing and rigid enough to
withstand the necessary carbide. The 28” skis are fully assembled
with a 20” spring while the 38” skis come without the spring.
Saddles and other components sold separately. Not drilled for carbides.
Extruded IFS aluminum drag
skis are standard equipment
on the Wahl Bros. Drag
chassis. Each ski weighs 2
lbs. Total length is 24”, ski spindle width is 3” and is easily
compatible with most sleds. Skis are complete but do not
include wear bars and are sold individually.
Skis
03-015…..North Star Racing Skis, 28” w/20” Springs, pr. ..................$335.00
03-016…..North Star Racing Skis, 38”, w/o Springs, pr. ....................$250.00
Components
03-017A…Leaf Spring, 20” Centers, ea. (3” hole centers) ..................$42.50
03-024A…Leaf Spring, 16” Centers, ea. (3” hole centers) ..................$37.50
03-026…..Helper Leaf, 10 1/2” Long ....................................................$19.25
03-027…..Saddle, 2'' Wide with 2 1/2'' Hole Centers, ea. (1/4''Thick). $20.00
03-028…..Saddle, 2” Wide with 3” Hole Centers, ea. (1/8” Thick) ......$16.00
03-029..…Saddle, 2” Wide with 3” Hole Centers, ea. (1/4” Thick) ......$20.00
04-928…..Woody's 10” Oval Racing Carbides, CSD-5060, pr. ..........$139.95
04-956…..Woody's 14” Oval Racing Carbides, CSD-5050, pr. ..........$157.95
04-927…..Woody's 10” North Star Carbides, pr. ................................$139.95
03-019…..Plastic Ski Hoop, North Star Ski, ea. ..................................$18.00
Skis
03-014A…Extruded IFS Aluminum Drag Ski, ea. ..............................$135.00
Replacement Components
03-086......Plastic Ski Hoop, ea. ..........................................................$16.00
03-074…..Ski Hoop Spacer, Aluminum, ea. ..........................................$3.50
Wear Bars
03-038…..Steel Wear Bar, pr. ..............................................................$17.95
03-040…..Steel Wear Bar, 2” Carbide, pr. ............................................$35.00
PowerMadd Mini-Ski
Champ Extruded Skis
These extruded aluminum skis support the carbide much better than a
plastic bottomed ski thus reducing ski
chatter. The original Champ skis have
a 1/2" flat groove bottom, are 17”
long and are 3 1/4" wide. Spindle
width is 2”. The wide style skis also have the 1/2" flat groove, are
17” long, but are 3 1/2" wide and allow for 3” Spindles. Carbides
that fit best are Woody's 10” CSD-5060 (04-928) or the 14” CSD5050 (04-956). Ski comes complete with hoop attached and stainless steel clips are included. Sold individually.
Skis
03-070A.....Champ Ski assy, ea. ........................................................$135.00
03-069A.....Champ Ski assy, Wide, ea. ..............................................$135.00
Components
03-071.....Champ Extruded Ski, Extrusion only....................................$95.00
03-067.....Wide Champ Extruded Ski, Extrusion only ..........................$95.00
03-082.....Stainless Steel U-clips, ea. ....................................................$3.95
03-086.....Plastic Ski Hoop, ea. ............................................................$16.00
03-073.....Aluminum Ski-Hoop Spacer, ea. (2” ski) ................................$3.00
03-074.....Aluminum Ski Hoop Spacer, ea. (3” ski) ................................$3.50
03-414…..Silver Plastic Mini-PowerMadd Ski, pr. ..............................$169.95
03-415…..Green Plastic Mini-PowerMadd Ski, pr. ............................$169.95
03-418…..Black Plastic Mini-PowerMadd Ski, pr. ..............................$169.95
03-419…..Blue Plastic Mini-PowerMadd Ski, pr. ................................$169.95
Ski Components
03-424.....PowerMadd Loop Blackout Kit, ea. ......................................$14.95
03-426.....Replacement Ski Hoop, ea...................................................$12.95
Mini-Ski Saddle Kit
03-420…..Saddle Kit, Drag Version for ProStock
& Open Mod............................................$39.95
03-421…..Saddle Kit, Arctic Z120 ..........................$39.95
03-422…..Saddle Kit, Polaris XCR 120 ..................$39.95
03-423…..Saddle Kit, Ski-Doo Mini-Z ....................$39.95
Replacement Wear Bars
03-425…..Steel Wear Bar, pr. ..............................................................$29.95
03-427... ..Carbide Wear Bar, 5”, 60 Degree Carbide, pr.....................$54.95
03-428... ..Carbide Wear Bar, 3”, 120 Degree Carbide, pr...................$34.95
Leaf Spring Drag Skis
These are the Wahl Bros. manufactured aluminum skis found on
some of the fastest snowmobiles in
the world. Each ski assembly
weighs 4 pounds complete. Total
length is 24” and the width is
4”.Sold individually.
Ski-Boots
The 5” & 6 1/4” boots come
with nylon straps to hold them
in place when lifting your
machine or pulling it backwards. The 4” boots do not have straps, use ISC Race tape.
Boots protect carbides, floors and trailer beds. Made of
heavy Polyethylene. Sold in pairs
03-180…..Ski Boots, 6 1/4”, pr. ............................................................$54.95
03-184…..Ski Boots, 5”, pr ..................................................................$54.95
03-186…..Ski Boots, 4” wide x 24” Long, pr.........................................$46.95
29
Skis
03-008A…Leaf Spring Aluminum Ski, each........................................$115.00
03-010A…Leaf Spring Aluminum Ski, with Helper Leaf, each ..........$140.00
Ski Components
03-020…..Aluminum Ski Blank, 24”......................................................$22.50
03-024A...Leaf Spring ..........................................................................$37.50
03-026…..Helper Leaf ..........................................................................$19.25
03-028…..Saddle, 2” wide w/3” hole centers (1/8” Thick) ....................$16.00
03-029…..Saddle, 2” wide w/3” hole centers (1/4” Thick) ....................$20.00
03-030…..Front Leaf Spring Bracket ....................................................$12.00
03-032…..Rear Leaf Spring Bracket ....................................................$12.00
03-034…..Brass Spring Slider ................................................................$5.95
03-036…..Plastic Ski Hoop, each ........................................................$14.00
Wear Bars
03-038…..Steel Wear Bar, pr. ..............................................................$17.95
03-040…..Steel Wear Bar, 2” Carbide, pr. ............................................$35.00
SKIS & STEERING
These skis are the ultimate for
Pro Stock and Open-Mod
Drag racing. The high quality
compression molded ski
reduces weight while increasing strength and durability.
Great for Grass Drag racing, these skis are also an excellent
performance upgrade for all Mini Sleds. Some sleds may
require fabrication in order to attach to the spindles. Come
with Steel Wear Bar. Order Saddle Kits separately.
Skis & Steering
Order Line 800-883-0294
Wahl Bros. Asphalt Skis
Fox Zero Pro Shocks
Wahl Bros. has designed tough,
lightweight aluminum skis for asphalt
racing. Available with two or four
wheels and in Aluminum or Black
Powder Coat, these asphalt skis feature the newest wheel innovation available. Billet aluminum
wheels with a high grade polyurethane molded on make for a
wheel that can handle speed and friction like no other wheel
available. The asphalt skis with two wheels weigh 4 lbs. 2 oz.
each, while skis with four wheels weigh 5 lbs 4 oz. each. NHRA
& ISR approved. Sold in pairs.
The new lighter aluminum shock bodies are threaded to allow easy spring
tension adjustment. Available lengths
are 10”, 12” & 14”. Shock length can
be adjusted by adding or deleting
spacers inside or by changing eyelet length. Includes 3/8” ID
spacers and spring retainers. Shocks are sold as pairs.
Shocks
11-294A…10” Fox Shock w/o Spring, pr. ..........................................$549.95
11-296A....12” Fox Shock w/o Spring, pr. ..........................................$549.95
11-295A….14” Fox Shock w/o Spring, pr. ..........................................$549.95
Shock Shaft Spacers
11-297…..Shock Shaft Spacer, 1/2” ID, .250” Long ..............................$3.00
11-298…..Shock Shaft Spacer, 1/2” ID, .500” Long ..............................$3.25
11-299…..Shock Shaft Spacer, 1/2” ID, 1.00” Long ..............................$3.50
Shock Eyelets/ Components
11-286…..Aluminum Shock Eyelet, 1.14”, ea. ......$23.95
11-287…..Aluminum Shock Eyelet, 1.39”, ea. ......$23.95
11-288…..Aluminum Shock Eyelet, 1.64”, ea. ......$24.95
11-290…..Snap Ring, Shock Eyelet, ea.....................$.60
11-289…..Spherical Bearing, 1” OD, 1/2” ID, .390” Wide, ea.................$8.25
11-291…..Aluminum Shock Eyelet Insert, 5/16” ID, ea. ........................$2.95
11-293…..Aluminum Shock Eyelet Insert, 3/8” ID, ea. ..........................$2.95
Spring Retainer
11-303…..Fox Shock Spring Retainer, ea. ..........................................$14.00
03-238A…..Two Wheel Aluminum Asphalt Ski, Aluminum Wheels, pr. $460.00
03-239A…..Four Wheel Aluminum Asphalt Ski, Aluminum Wheels, pr. $660.00
03-240A…..Powder Coated Asphalt Ski, Two Wheel Aluminum, pr. ..$495.00
03-244A…..Powder Coated Asphalt Ski, Four Wheel Aluminum, pr. $695.00
Replacement Components
03-206…..Asphalt Ski Hoop, Aluminum ..............................................$38.00
03-205…..Asphalt Ski Hoop, Black Powder Coat ................................$45.00
03-208A...1-Wheel Axle with Spacer & Fasteners................................$16.00
03-209A...2-Wheel Axle with Spacers & Fasteners ..............................$18.00
03-218…..Asphalt Ski Center Brace ......................................................$9.00
03-207A...Ski Hoop Grommets with Fasteners, pr. (for one hoop) ........$6.15
03-232A…Aluminum Asphalt Ski Wheel, 4” 5/16”, 20mm ID ..............$59.95
02-395...…Replacement Bearing ..........................................................$8.25
SKIS & STEERING
Fox MXR Float Shocks
Fox Float R Shocks
Wahl Brothers Racing has teamed up
with Fox shocks to bring you the lightest, most adjustable shock in the snowmobile market place. The FLOAT MXR
shock is an ultra light shock that weighs
only 1.1 lbs. at 10.25”. The new Float Shock has many new features, including AVA, a technology that incorporates new levels of
fine-tuning adjustment. AVA increases or decreases the volume of
the positive air in the spring chamber. This allows the rider to alter
the shape of the spring curve. AVA allows as much as 200 lbs. of
adjustment in spring rate. Instead of using an external spring, the
internal air chamber can be adjusted with an included air pump.
Available in two standard lengths, you can add shaft extensions to
get you to your desired length. The 10.25” can be taken to 15” and
the 9.5” shock can be lengthened out to 13.5”. Shocks come with all
necessary hardware. Purchase extensions separately.
This incredibly light, best performing oil
dampened air shock that the market has
to offer keeps getting better and is finding its way into the snowmobile market via the racing scene.
Available in two lengths, the 6 1/2” weighs only .44 lbs., and
the 7 7/8” weighs only .55 lbs. The Fox R shock has
adjustable rebound. The 6 1/2” shock has 1 1/2” of travel and
the 7 7/8” shock has 2” of travel. These shocks are designed
to be used in mini sled applications or in application where
shorter lengths are desired. Sold individually.
11-329…..Mini Fox Float R Shock, 6 1/2" Length, 1 ½” travel, ea.....$254.95
11-333…..Mini Fox Float R Shock, 7 7/8" Length, 2” travel, ea. ........$254.95
Shocks
11-337A...Fox Shock, Float, MXR, 9.5", pr.........................................$620.00
11-343A...Fox Shock, Float, MXR, 10.25'', pr.....................................$620.00
11-335…..Fox Shock, Float, MXR, 10.25'', ea. ..................................$310.00
11-348A...Fox Shock, Float, MXR, w/Extension,
(Wahl Drag Susp.) 12.50'', each ........................................$348.00
11-338…..Aluminum Schrader Valve with O’Ring ................................$14.50
11-351…..Air Filler Extension, 90 Degree ............................................$19.95
Pump
11-341…..Fox High Pressure Pump with Bleed ..................................$30.00
Pro Stock Shocks
Now available in five different lengths.
All are adjustable 1/4” shorter and
longer. Weight is less than 3 pounds
per pair. Composed of a heavy duty
internal spring and moly tubing, these shocks are very
durable and a favorite amongst drag racers.
Fox Float Shock Accessories
11-430A…..Pro
11-432A…..Pro
11-434A…..Pro
11-436A…..Pro
11-437A…..Pro
Extensions & Holding Tool
11-345…..Fox Float Shock Extension, .750'', ea. ................................$12.50
11-346…..Fox Float Shock Extension, 1.00'', ea. ................................$13.65
11-347…..Fox Float Shock Extension, 2.00'', ea. ................................$14.35
11-349…..Fox Float Shock Extension, 2.25'', ea. ................................$15.25
11-339…..Body Clamp, 1.060'' ID, MXR Fox Float Shock ..................$29.95
11-338…..Aluminum Schrader Valve w/o’ring, OEM Replacement......$14.50
11-351…..90° Extension for Schrader Valve ........................................$19.95
Fox 'T' Extension
Allows you to convert your float shock to be used in the Wahl Bros. Rear
suspension.
11-328…..T-Extension, Fox Float, 3.315" Long....................................$32.50
30
Stock
Stock
Stock
Stock
Stock
Shocks,
Shocks,
Shocks,
Shocks,
Shocks,
11”, pr.
12”, pr.
13”, pr.
14”, pr.
15”, pr.
..............................................$144.95
..............................................$144.95
..............................................$144.95
..............................................$144.95
..............................................$144.95
Skis & Steering
Order Line 800-883-0294
Hand Taps
High Strength
High Speed Steel hand taps are for
use by hand or in a turning lathe for
quick threading. Taps are available in
RH or LH thread. They feature
straight flutes and a bright finish.
High Strength 4130 heat-treated
steel alloy body and race with hard
chrome plated heat treated steel
alloy ball. They are Teflon lined for
self lubricating. Supplied with jam nuts.
Right Hand Taps
03-387.....RH Tap, 1/4”-28 NF, Plug ......................................................$5.95
03-388.....RH Tap, 5/16”-24 NF, Plug ....................................................$7.60
03-389.....RH Tap, 3/8”-24 NF, Plug ......................................................$9.75
03-390.....RH Tap, 7/16”-20 NF, Plug ..................................................$15.45
03-391.....RH Tap, 1/2”-20 NF, Plug ....................................................$15.75
Left Hand Taps
03-393.....LH Tap, 1/4”-28 NF, Plug ........................................................$8.45
03-394.....LH Tap, 5/16”-24 NF, Plug ....................................................$10.55
03-395.....LH Tap, 3/8”-24 NF, Plug ......................................................$15.65
03-396.....LH Tap, 7/16”-20 NF, Plug ....................................................$20.35
03-397.....LH Tap, 1/2”-20 NF, Plug ......................................................$22.00
Male Ends
03-352…..Aurora
03-354…..Aurora
03-356…..Aurora
03-358…..Aurora
03-360…..Aurora
03-362…..Aurora
03-364…..Aurora
03-366…..Aurora
03-368…..Aurora
03-370…..Aurora
03-372…..Aurora
03-374…..Aurora
03-376…..Aurora
03-378…..Aurora
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Female Ends
03-380…..Aurora
03-382…..Aurora
03-384…..Aurora
03-386…..Aurora
Rod
Rod
Rod
Rod
End,
End,
End,
End,
Female,
Female,
Female,
Female,
Aurora Rod Ends
Male Ends
03-300…..Aurora
03-302…..Aurora
03-304…..Aurora
03-306…..Aurora
03-308…..Aurora
03-310…..Aurora
03-312…..Aurora
03-314…..Aurora
03-316…..Aurora
03-318…..Aurora
03-320…..Aurora
03-322…..Aurora
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
End,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Female Ends
03-324…..Aurora
03-326…..Aurora
03-328…..Aurora
03-330…..Aurora
03-332…..Aurora
03-334…..Aurora
Rod
Rod
Rod
Rod
Rod
Rod
End,
End,
End,
End,
End,
End,
Female,
Female,
Female,
Female,
Female,
Female,
Jam Nuts
01-200…..Jam Nut, 1/4”-28 Thread, RH ..................................................$.15
01-201…..Jam Nut, 1/4”-28 Thread, LH ..................................................$.25
01-202…..Jam Nut, 5/16”-24 Thread, RH ................................................$.20
01-203…..Jam Nut, 5/16”-24 Thread, LH ................................................$.30
01-204…..Jam Nut, 3/8”-24 Thread, RH ..................................................$.25
01-205…..Jam Nut, 3/8”-24 Thread, LH ..................................................$.65
01-206…..Jam Nut, 7/16”-20 Thread, RH ................................................$.25
01-207…..Jam Nut, 7/16”-20 Thread, LH ................................................$.65
01-208…..Jam Nut, 1/2”-20 Thread, RH ..................................................$.30
01-209…..Jam Nut, 1/2”-20 Thread, LH ..................................................$.80
01-210…..Jam Nut, 5/8”-18 Thread, RH ..................................................$.45
01-211…..Jam Nut, 5/8”-18 Thread, LH ..................................................$.95
1/4”, 1/4”-28 RH, CM-4 ....................$6.05
1/4”, 1/4” 28 LH, CB-4......................$6.25
5/16”, 5/16”-24 RH, CM-5 ................$6.65
5/16”, 5/16”-24 LH, CB-5 ................$6.85
3/8”, 3/8”-24 RH, CM-6 ....................$7.55
3/8”, 3/8”-24 LH, CB-6 ....................$7.80
3/8”-24 RH w/Stud, CM-6S ..............$9.65
3/8”-24 LH w/Stud, CB-6S ..............$9.90
7/16”, 7/16”-20 RH, CM-7 ................$8.95
7/16”, 7/16”-20 LH, CB-7 ................$9.00
1/2”, 1/2”-20 RH, CM-8 ..................$11.75
1/2”, 1/2” -20 LH, CB-8 ..................$11.95
Stainless Steel Shim Washers
These 3/8” ID x 5/8” OD stainless steel washers work great
for adjusting bump steer. Available in two thicknesses. Sold
individually
5/16”, 5/16”-24 RH, CW-5............$5.90
5/16”, 5/16”-24 LH, CG-5 ............$6.15
3/8”, 3/8”-24 RH, CW-6................$7.05
3/8”, 3/8”-24 LH CG-6..................$7.15
7/16”, 7/16”-20 RH, CW-7............$8.80
7/16”, 7/16”-20 LH, CG-7 ............$9.00
01-033…..Washer .390 ID x .630 OD x .030 thick ..................................$.20
01-034…..Washer .390 ID x .630 OD x .060 thick ..................................$.20
Aircraft Quality
4130 steel, Teflon lined, gold cadium plated aircraft style rod ends for
tie and radius rods with solid
shanks. The body of these ends is
not heat treated. The Teflon lining keeps the joints tight and
eliminates free play. Supplied with jam nuts.
03-336…..Aurora
03-338…..Aurora
03-340…..Aurora
03-342…..Aurora
03-344…..Aurora
03-346…..Aurora
03-348…..Aurora
03-350…..Aurora
Rod
Rod
Rod
Rod
Rod
Rod
Rod
Rod
End,
End,
End,
End,
End,
End,
End,
End,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
Male,
5/16”, 5/16” RH, AW-5T ............$23.70
5/16”, 5/16” LH, AG-5T ..............$24.15
3/8”, 3/8” RH, AW-6T ................$27.65
3/8”, 3/8” LH, AG-6T ..................$27.35
3/8”, 3/8”-24 RH, MM-6TY ............$15.25
3/8”, 3/8”-24 LH, MB-6TY ..............$15.50
3/8”, 7/16”-20 RH, XM-6 ................$16.15
3/8”, 7/16”-20 LH, XB-6..................$16.40
7/16”, 7/16”-20 RH, MM-7TY ........$17.85
7/16”, 7/16”-20 LH, MB-7TY ..........$18.10
1/2”, 1/2”-20 RH, MM-8TY ............$21.25
1/2”, 1/2”-20 LH, MB-8TY ..............$21.55
31
SKIS & STEERING
Economy Zinc Plate
The Economy ends have a
Carbon steel body that is protected with a coating for corrosion resistance. The balls are
heat treated and oil impregnated. Aurora bearings feature all
steel races with full swage construction around precision
ground steel balls. All ends are supplied with jam nuts.
5/16”, 5/16”-24 RH, AM-5T ............$23.55
5/16”, 5/16”-24 LH, AB-5T..............$23.90
3/8”, 3/8”-24 RH, AM-6T ................$26.65
3/8”, 3/8”-24 LH AB-6T ..................$27.15
3/8”, 3/8”-24 RH, w/Stud, AM-6ST $30.05
3/8”, 3/8”-24 LH, w/Stud, AB-6ST ..$30.25
3/8”, 7/16”-20 RH, XAM-6T............$32.20
3/8”, 7/16”-20 LH, XAB-6T ............$32.40
7/16”, 7/16”-20 RH, AM-7T ............$32.00
7/16”, 7/16”-20 LH, AB-7T..............$32.20
1/2”, 1/2”-20 RH, AM-8T ................$37.75
1/2”, 1/2”-20 LH, AB-8T..................$37.95
5/8”, 5/8”-18 RH, AM-10T ..............$49.00
5/8”, 5/8”-18 LH, AB-10T................$49.30
SKIS & STEERING
Skis & Steering
Order Line 800-883-0294
Aluminum Rod Ends
Torsion Bars
Anodized 7075-T6 aircraft aluminum
rod ends are approximately 1/3 the
weight of steel rod ends. Ultimate
static load of a 5/16” end is 3200
lbs., 3/8” end is 4500 lbs., 7/16” end
is 4800 lbs., and the 1/2" rod end is 7700 lbs. They have a
hardened, chrome plated, precision ground steel ball and a
self lubricating Teflon/Kevlar injection molded race. All are
supplied with aluminum jam nuts except the 5/16” LH, which
has a steel jam nut. Aluminum jam nuts are also available.
Sold individually.
Adjustable torsion bar assemblies for Polaris chassis.
Available with a 3/4” solid
aluminum bar and with a 7/8”
x .065” or a 7/8” x .083”
Chrome-Moly steel torsion bar. All kits have a 1” OD outer
housing. Kits contain torsion bar w/housing, chassis mounts,
arms w/rod ends and fasteners. Splined ends listed below
use the fine 48-spline arms. These are the same as the original Polaris. The torsion bars with housing will interchange
with the standard Polaris aluminum torsion bar kit.
Torsion Bar Kit
12-521…..Polaris Torsion Bar Kit, Aluminum, OEM 2872395 ............$339.95
12-523…..Polaris Torsion Bar Kit, Moly, 7/8” x .065”..........................$335.00
12-524…..Polaris Torsion Bar Kit, Moly, 7/8” x .083”..........................$335.00
Torsion Bars
12-520A…Moly Torsion Bar w/Housing, 7/8” x .065” x 32 3/4" ............$84.95
12-522A…Moly Torsion Bar w/Housing, 7/8” x .083” x 32 3/4" ............$84.95
12-518A…Moly Torsion Bar w/Housing, 7/8” x .083” x Custom ..........$94.95
Splined Ends
12-525…..Torsion Bar Splined End, 3/4” OD........................................$22.50
12-526…..Torsion Bar Splined End, 1” OD ..........................................$24.35
Torsion Arms
11-120…..Torsion Bar Arm, 3 5/8” Centers ..........................................$49.95
12-527…..Torsion Bar Arm, 10 Degree Twist, RH, 3 3/4” Centers ......$93.95
12-528…..Torsion Bar Arm, 10 Degree Twist, LH, 3 3/4” Centers ......$93.95
12-530…..Torsion Bar Arm, 4 7/8” Centers ..........................................$51.95
Male Ends
03-250…..Aluminum Rod End, Male, 5/16”-24 RH ..............................$12.75
03-251…..Aluminum Rod End, Male, 5/16”-24 LH ..............................$12.75
03-254…..Aluminum Rod End, Male, 3/8”-24 RH ................................$17.50
03-255…..Aluminum Rod End, Male, 3/8”-24 LH ................................$17.50
03-258…..Aluminum Rod End, Male, 7/16”-20 RH ..............................$20.25
03-259…..Aluminum Rod End, Male, 7/16”-20 LH ..............................$20.25
03-260…..Aluminum Rod End, Male, 1/2"-20 RH ................................$25.50
03-261…..Aluminum Rod End, Male, 1/2"-20 LH ................................$25.50
Female Ends
03-266…..Aluminum Rod End, Female, 5/16”-24 RH ..........................$12.75
03-267…..Aluminum Rod End, Female, 5/16”-24 LH ..........................$12.75
03-268…..Aluminum Rod End, Female, 3/8”-24 RH ............................$17.50
03-269…..Aluminum Rod End, Female, 3/8”-24 LH ............................$17.50
Aluminum Jam Nuts
03-280…..Aluminum Jam Nut, 5/16”-24 RH ..........................................$1.25
03-282…..Aluminum Jam Nut, 3/8”-24 RH ............................................$1.50
03-283…..Aluminum Jam Nut, 3/8”-24 LH ............................................$1.50
03-284…..Aluminum Jam Nut, 7/16”-20 RH ..........................................$1.65
03-285…..Aluminum Jam Nut, 7/16”-20 LH ..........................................$1.65
03-286…..Aluminum Jam Nut,1/2”-20 RH..............................................$1.75
03-287…..Aluminum Jam Nut,1/2”-20 LH ..............................................$1.75
Spindles
Spindles are OEM Polaris. Sold individually. The hardened 2
1/8” wide spindle fits the Wahl Extruded IFS skis.
Pre-Edge
11-130…..Spindle, Hard, fits original Indy, OEM 6230075, 48 Spline $149.50
11-132…..Spindle, 1” Taller at Base, fit '97-'99 and some ‘00-’01,
48 Spline ............................................................................$128.00
Edge
11-133…..Spindle, OEM 6230206, ‘00 & newer, Hardened 23 Spline $87.25
11-131…..Spindle, OEM 6230248, ‘00 & newer, Standard 23 Spline ..$87.25
11-136…..Spindle, Hardened, 23 Spline, 2 1/8” wide ..........................$97.50
Spindle Inserts
11-138…..Bushing, Spindle Insert, Steel, 5/8” x 3” (stock) ....................$6.95
11-139…..Bushing, Spindle Insert, Steel, 5/8” x 2 1/8” ..........................$8.00
Aluminum Steering
Arm
Lightweight aluminum steering arms available in both fine and coarse spline. Sold
individually.
Edge
11-121.....Aluminum Steering Arm, 3 1/2” Centers, Edge, ea (coarse) $51.95
Pre Edge
11-120…..Aluminum Steering Arm, 3 5/8” Centers, Original Indy's,
ea. (Fine) ..............................................................................$49.95
12-530…..Aluminum Arm, 4 7/8” Centers, ea. (Fine) ..........................$51.95
Twist (Fine)
12-527…..Aluminum Arm, 3 3/4" Centers, RH 10 Degree Twist ..........$93.95
12-528…..Aluminum Arm, 3 3/4" Centers, LH 10 Degree Twist ..........$93.95
Spindle Bushing Set
Includes 2 washers, 2 top and 2 lower bushings.
11-134A.....Polaris, Original Indy ..........................................................$12.75
11-137A.....Polaris, Pro-X & Pro XR ....................................................$35.95
Handlebars
Lightweight 4130 chrome moly
handlebars. Powder-coated Black.
Aluminum Support Block
Two-piece aluminum steering post support
block is machined from aluminum with
grease-able Delrin bushing. This support
block attaches your steering hoop to the
post and keeps it tight.
Drag
11-240…..Handlebar,
11-242…..Handlebar,
OEM
11-244…..Handlebar,
Oval
11-246…..Handlebar,
11-247…..Handlebar,
11-245…..Handlebar,
11-230 ....Aluminum Support Block, 7/8” ID ........................................$49.95
11-231 ....Aluminum Support Block, 1'' ID, ea. ....................................$49.95
11-232 ....Steering Post Support Block Bushing, 1'' ID, ea. ................$12.00
32
11-247
11-245
11-240
24” Drag ........$25.00
29” Standard ..$25.00
2” Rise ..............................................................$40.00
Oval, 2” Forward, Leftside ................................$45.00
Oval, 2'' Rise, 2” Forward, Left Side..................$45.00
Oval, Straight, Left Side ....................................$45.00
Skis & Steering/Fuel Systems
Order Line 800-883-0294
Handlebar Accessories
Articulating
Handlebar Risers
Grips, clamps and tape available for
various needs.
This universal, billet aluminum handle bar riser kit will work on almost
every snowmobile made today. Two
perfectly matched CNC machined billet riser arms accompanied by bar clamps and a Chrome-moly adapter bar make for
tight fit on your handle bar. This kit raises your bars to a
more comfortable position by allowing you to move it in anyway that is desired. Available in 2”, 3” & 4” sets. Throttle
extension may be needed for the 3” & 4” in most cases.
Handlebar Clamps
11-260…..Aluminum Handlebar Clamp, Dual 3” Wide ........................$11.60
11-262…..Aluminum Handlebar Clamp, Single 3/4” Wide....................$10.50
Handlebar Mount
11-140…..Steering Post Handle Bar Mount, 4-Bolt Pattern,
Weld-on, 1”ID..........................................................................$7.50
Grips
11-264…..Handlebar Grip, Polaris, ea ..................................................$11.60
11-265…..Handlebar Grip, Arctic, ea ......................................................$6.30
11-263…..Ultra Handle Bar Grips, 8 ½” Long, pr. ................................$19.95
11-268…..SLP Cushion Grips, PVC Vinyl Closed Cell Foam, pr. ..........$8.95
Tape and Plug
11-267…..Rubber Handlebar Tape, 3/4” x 22' Roll ................................$5.25
11-269......Aluminum Handlebar Plug ..................................................$14.95
Risers
11-236.....Articulating Handlebar Riser Kit, 2” ......................................$89.95
11-235.....Articulating Handlebar Riser Kit, 3” ......................................$94.95
11-234.....Articulating Handlebar Riser Kit, 4” ......................................$99.95
Plastic Ultra Hooks
Throttle Extension Kit
06-807.....PowerMadd Throttle Extension Kit, (up to 10”) ....................$29.95
Features a molded nylon plastic material that won't rob heat from hand warmers. Fits all standard OEM handlebars.
Available in short (45 degree) and long
(90 degree) hooks.
Hook,
Hook,
Hook,
Hook,
Short, Green ..........................................$24.95
Short, Black ..........................................$24.95
Short, Yellow ..........................................$24.95
Short, Red..............................................$24.95
Long 90 degree
13-188.....Plastic
13-190.....Plastic
13-192.....Plastic
13-193.....Plastic
13-194.....Plastic
Hook,
Hook,
Hook,
Hook,
Hook,
Long, Black ............................................$24.95
Long, Purple ..........................................$24.95
Long, Red ..............................................$24.95
Long, Green ..........................................$24.95
Long, Yellow ..........................................$24.95
Ultra
Ultra
Ultra
Ultra
Ultra
This 4130 Moly steering hoop weighs
approximately half of stock. 16 3/4” ID
SKIS & STEERING/FUEL SYSTEMS
Short 45 degree
13-180.....Plastic Ultra
13-182.....Plastic Ultra
13-183.....Plastic Ultra
13-186.....Plastic Ultra
Steering Hoop
11-220…..Moly Steering Hoop ................$49.95
Fuel Systems
VM Carburetors
The tune ability of the VM Round-Slide Mikuni
carburetor is hard to beat. All come standard with
a cable type choke except for the VM 18, which
has a lever type choke. Pre-jetting is available to
your specs for an additional $25.00 per carb.
VM40 carbs are no longer available through
Mikuni. VM48 carbs are special order.
SLP Control Hook
Control Hooks attach to the
end of the handle bar and are
designed to provide more
comfort and control. These hooks provide proper distance
between the end of the hook and the throttle or the brake to
make the turn down functional while using the controls. The
8” cushion grip can be slid easily over the hook to provide a
superior gripping surface. Kit contains one hook w/anchor
and a cushion grip.
Part #
Slide
Price
1.5
3
72.95
30
1.5
3
89.95
6DH3
30
1.5
2.5
109.95
159,
Q-5
6DH4
35
1.5
2.5
166.75
360
166,
Q-0
6DH3
40
1.5
2.5
134.95
540
244,
AA-5
7DH2
35
1.5
1.5
174.00
Main Jet
Needle
Jet
06-101 VM18
80
145,
0-6
4F18
30
13-175…..SLP Control Hook, Kit ..........................................................$23.95
06-103 VM20
80
145,
0-6
4F18
Wahl Bros. Billet Handlebar Riser
06-102 VM34
330
159,
Q-0
06-104 VM36
310
06-108 VM38
06-116 VM44
The highest quality riser available will fit any
7/8” handlebar. Comes with Anti-Vibration
Silicon Gel filled cross tube to fit clamp on
style steering posts. Thickness of risers is
3/4”, so check that on T-style post applications that the riser is not too wide to fit handlebars.
11-239.....Billet Aluminum Handlebar Riser, 5” ..................................$119.95
33
Size
Jet
Pilot Jet Needle &
Needle
Seat
Fuel Systems
Order Line 800-883-0294
Jet Washers & Extenders
TMX Racing Carbs
06-600.....Main Jet Extender ................................$8.05
06-630.....Jet Washer, Small ................................$1.85
06-632.....Jet Washer, Flat with 4 Holes ..............$9.95
06-634.....Jet Washer, Cupped ..........................$14.95
These Mikuni carbs feature a radial flat slide
design that provides improved throttle
response, along with a wider and stronger
overall powerband. With increased sensitivity
to tuning, very minimal changes are able to
produce noticeable results. Uses standard VM
type mounting flanges and most of the same
tuning components. TMX 38 has a fixed needle
jet equal to an R-1. Comes standard with a cable type choke.
TMX 40.2 carbs are available by special order.
Float Bowls & Plugs
06-616.....Float Bowl, VM30-34 ..........................$36.95
06-618.....Float Bowl, VM36-39.5 ......................$41.05
06-620.....Float Bowl, VM40-48 ..........................$48.50
06-622.....Float Bowl Plug, VM30-34 ....................$7.65
06-623.....Float Bowl Plug, O-Ring Style, VM30-39.5 ............................$7.65
06-624.....Float Bowl Plug, Brass, VM36..............................................$12.15
06-626.....Float Bowl Plug, Brass, VM38-39.5......................................$12.15
06-628.....Bowl Plug, VM40-48 ..............................................................$4.95
06-636.....Screw, Float Bowl, VM30-34 & VM38-48 ..............................$1.15
06-638.....Screw, Float Bowl, VM36 ......................................................$1.15
06-140.....TMX Racing Carburetors, TMX 38 ....................................$192.95
TMX Repair Parts
Floats
TMX repair components. Sold individually.
06-612.....Float, VM30-34 ....................................$9.05
06-614.....Float, VM36-48 ..................................$10.95
06-611.....VM Float Arm ........................................$6.85
06-613.....VM Float Arm Pin ................................$2.30
06-650….O'Ring, Top Cover..................................$2.95
06-654.....Float Bowl............................................$32.35
06-656.....Screw, Top Cover ..................................................................$1.00
06-658.....Screw, Float Bowl..................................................................$1.00
06-641.....Drain Plug..............................................................................$9.25
06-662.....O'Ring, Drain Cover ..............................................................$1.75
06-664.....Gasket, Float Bowl ................................................................$4.30
06-659.....Spring, Throttle Valve, TMX ..................................................$5.50
06-652.....Plastic Retaining Ring, (for Jet Needle) ................................$2.15
Carb Covers
06-655.....Carb
06-653.....Carb
06-651.....Carb
06-647.....Carb
06-648.....Carb
06-649.....Carb
Cover
Cover
Cover
Cover
Cover
Cover
w/Gasket, 30-34mm ..........$9.05
w/Gasket, 36-39.5mm ....$22.25
w/Gasket, 40-48mm ......$22.25
Gasket, 30-34mm ............$2.50
Gasket, 36-39.5mm ........$3.20
Gasket, 40-48mm ............$6.85
Mikuni TM-38 Parts
Replacement parts for the TM-38 Carbs found on the XCR
800 and other Polaris machines. Main Jets and Pilot Jets are
the same as VM round slide carbs. All parts sold individually.
Spring Plates & Clips
06-606.....Plate, Spring Seat, VM30-34..........................$3.80
06-608.....Plate, Spring Seat, VM36-39.5 ......................$3.80
06-610.....Plate, Spring Seat, VM40-48..........................$4.15
06-602.....Clip, Needle Positioning, VM30-39.5......................................$1.45
06-604.....Clip, Needle Positioning, VM40-48 & TMX ............................$1.45
Carb Slides
06-665......TM-38 Carb Slide, 1.5 ..............................$57.95
06-666......TM-38 Carb Slide, 2.0 ..............................$75.60
06-667......TM-38 Carb Slide, 2.5 ..............................$75.60
06-668......TM-38 Carb Slide, 3.0 ..............................$75.60
06-669......TM-38 Carb Slide, 3.5 ..............................$75.60
Jet Needles
06-589......TM Jet Needle, 9FH04-57 ........................$20.95
06-590......TM Jet Needle, 9EH01-57 ........................$17.45
06-591......TM Jet Needle, 9DH06-54 ........................$20.95
06-592......TM Jet Needle, 9DH01-54 ........................$17.45
06-593......TM Jet Needle, 9CJB01-50 ......................$14.99
Starter Jets
06-680......Starter Jet, 130............................................$4.35
06-681......Starter Jet, 135............................................$4.35
06-682......Starter Jet, 140............................................$4.35
06-683......Starter Jet, 145............................................$4.35
06-684......Starter Jet, 150............................................$4.35
06-685......Starter Jet, 155............................................$4.35
06-686......Starter Jet, 160............................................$4.35
Pilot Air Jets
06-687......Pilot Air Jet, 0.5 ..........................................$5.50
06-688......Pilot Air Jet, 0.6 ..........................................$5.50
06-689......Pilot Air Jet, 0.7 ..........................................$5.50
06-690......Pilot Air Jet, 0.8 ..........................................$5.50
06-691......Pilot Air Jet, 0.9 ..........................................$5.50
06-692......Pilot Air Jet, 1.0 ..........................................$5.50
06-693......Pilot Air Jet, 1.1 ..........................................$5.50
06-694......Pilot Air Jet, 1.2 ..........................................$5.50
06-695......Pilot Air Jet, 1.3 ..........................................$5.50
Springs
FUEL SYSTEMS
06-660…..Spring, Throttle Valve, VM32-39.5 ........................................$4.50
06-661.....Spring, Throttle Valve, VM40-48 ..........................................$10.25
Adjusting Screws
06-598.....VM Idle Adjusting Screw ................................$4.90
06-599.....VM Idle Adjusting Screw Spring ....................$1.95
06-594.....VM Air Screw..................................................$6.05
06-595.....VM Air Screw Spring ......................................$1.95
Gaskets & O-Rings
06-640.....Washer, Brass Bowl Plug, VM30-34 ..............$1.15
06-662.....O'Ring, Bowl Plug, VM30-39.5 ......................$1.75
06-643.....Washer, Bowl Plug, VM40-48 ........................$1.45
06-644.....Washer, Needle & Seat, VM30-48 ................$1.10
06-645.....Gasket, Float Bowl, VM30-34 ........................$5.15
06-646.....Gasket, Float Bowl, VM36-48 ........................$5.15
TM24 Mikuni Carburetor
This carburetor is an excellent choice for many
different applications. The Mikuni flat slide
carbs offer better atomization of fuel, and use
jets that are readily available.
Mikuni TM-38 Parts Continued on Next Page...
06-105…..Mikuni Carburetor, TM24, ea. ................$141.75
34
Fuel Systems
Order Line 800-883-0294
Keihin Pilot Jets
TM-38 Repair Parts
06-713.....Gasket, Top Cap ....................................$14.95
06-714.....Screw, Top Cap........................................$1.75
06-715.....Gasket, Float Bowl ................................$10.45
06-716.....Screw, Float Bowl ......................................$.85
06-717.....Drain Plug ..............................................$39.95
06-718.....O'Ring, Drain Plug ..................................$1.55
06-719.....Gasket, Carb Body ................................$19.75
06-720.....Washer, Main Jet ....................................................................$1.75
06-721.....Clip, Jet Needle ......................................................................$4.65
06-722.....Washer, Jet Needle ................................................................$4.05
06-723.....Retaining Plate, Jet Needle ....................................................$4.65
06-724.....Screw, Jet Needle Retaining Plate ........................................$1.75
06-725.....Needle & Seat/Float Assembly ............................................$47.85
For Polaris Keihin carbs, 600 and 700 XC's. Series “21”.
Chokes
Part #
Size
Price
Part #
Size
Price
06-527
35
6.95
06-534
52
6.95
06-528
38
6.95
06-535
55
6.95
06-529
40
6.95
06-536
58
6.95
06-530
42
6.95
06-537
60
6.95
06-531
45
6.95
06-538
62
6.95
06-539
65
6.95
06-532
48
6.95
06-533
50
6.95
Jet Needles
06-840….Choke, Cable Style ................................$9.95
06-842.....Choke, Lever Style................................$14.95
06-844.....Choke, Button Style ..............................$17.95
06-825.....Dual Choke Cable, 33” ........................$52.35
06-826.....Triple Choke Cable ..............................$52.35
06-540.....Keihin
06-541.....Keihin
06-542.....Keihin
06-543.....Keihin
06-544.....Keihin
06-545.....Keihin
06-546.....Keihin
Carb Mounting Flanges
All flanges have 75mm mounting hole
centers. All flanges include clamp.
Jet
Jet
Jet
Jet
Jet
Jet
Jet
Needles,
Needles,
Needles,
Needles,
Needles,
Needles,
Needles,
1370G ..................................................$10.45
1370J....................................................$10.45
1368G ..................................................$10.45
1369G ..................................................$10.45
1371J....................................................$10.45
1372J....................................................$10.45
1371G ..................................................$10.45
Carb Slides
06-550.....Keihin
06-551.....Keihin
06-552.....Keihin
06-553.....Keihin
06-150.....Carb Mounting Flange, VM32-205, 30-34mm ......................$18.75
06-152.....Carb Mounting Flange, VM38-200, 36-39.5mm ..................$22.00
06-154.....Carb Mounting Flange, VM40-200, 40-48mm ......................$25.50
06-156.....Carb Mounting Flange Clamp, Worm Gear Style,
.312” wide(fits all flanges) ......................................................$1.75
06-157A...Carb Mounting Flange, VM40-48mm, Soft Rubber
w/Alum. Base Plate & O’Ring Seal ......................................$54.95
06-158.....O’Ring, Replacement (for 06-157A) ......................................$6.75
Carb
Carb
Carb
Carb
Slide,
Slide,
Slide,
Slide,
5.0
5.5
6.0
6.5
..............................$69.95
..............................$69.95
..............................$69.95
..............................$69.95
Keihin Repair Parts
06-487.....Spring Seat, Plastic ................................................................$9.25
06-488.....Clip, Needle Jet ......................................................................$4.95
06-489.....Needle Valve ........................................................................$28.95
06-490.....Gasket, Float Bowl ................................................................$6.95
06-491.....Gasket, Drain Plug ................................................................$1.45
06-492.....Drain Plug ............................................................................$13.95
Genuine Keihin Jets
Main Jets
Long hex head jets for Polaris Keihin
carbs.
Size
Price
Part #
Size
Price
06-425
140
6.95
06-440
178
6.95
Fit all VM, TM and TMX carburetors. Sold individually.
06-426
142
6.95
06-441
180
6.95
Part #
Size
Price
Part #
Size
Price
06-427
145
6.95
06-442
182
6.95
06-400
10
2.95
06-460
45
2.95
06-428
148
6.95
06-443
185
6.95
06-402
12.5
2.95
06-462
50
2.95
06-429
150
6.95
06-444
188
6.95
06-404
15
2.95
06-464
55
2.95
17.5
2.95
06-466
60
2.95
06-430
152
6.95
06-445
190
6.95
06-406
06-431
155
6.95
06-446
192
6.95
06-408
20
2.95
06-468
65
2.95
22.5
2.95
06-470
70
2.95
06-432
158
6.95
06-447
195
6.95
06-410
06-433
160
6.95
06-448
198
6.95
06-412
25
2.95
06-472
75
2.95
06-414
27.5
2.95
06-474
80
2.95
06-416
30
2.95
06-476
85
2.95
06-418
32.5
2.95
06-478
90
2.95
06-420
35
2.95
06-480
95
2.95
06-422
37.5
2.95
06-482
100
2.95
06-424
40
2.95
06-486
110
2.95
06-434
162
6.95
06-449
200
6.95
06-435
165
6.95
06-450
205
6.95
06-436
168
6.95
06-451
210
6.95
06-437
170
6.95
06-452
215
6.95
06-438
172
6.95
06-453
220
6.95
06-439
175
6.95
06-455
230
6.95
35
FUEL SYSTEMS
Part #
Genuine Mikuni
Pilot Jets
FUEL SYSTEMS
Fuel Systems
Order Line 800-883-0294
Genuine Mikuni Main Jets
Main Jet Carriers
Hex Main Jets
Fit all VM, TM and TMX carburetors. Sold individually. Sizes are 50 to 195 in increments of 5,
200 to 500 in increments of 10 and 540 to 700
in increments of 20.
Main Jet Carrier Kits
06-858.....Main Jet Carrier with Wrench,
Holds 45 Jets ................................$35.95
06-860.....Main Jet Carrier with Wrench,
Holds 126 Jets ..............................$47.95
Main Jet Carriers
06-852.....Main Jet Carrier, Mikuni, Rubber, Holds 25 Jets ....................$6.75
06-853.....Main Jet Carrier, Keihin, Rubber ............................................$7.95
Jet Wrenches
06-850.....Main Jet Wrench, Hex ..........................................$4.50
06-851.....Main Jet Wrench, Round Slotted..........................$4.75
Part #
Size
Price
Part #
Size
Price
06-200
50
2.95
06-244
250
2.95
06-201
55
2.95
06-245
260
2.95
06-202
60
2.95
06-246
270
2.95
06-203
65
2.95
06-247
280
2.95
06-204
70
2.95
06-248
290
2.95
06-205
75
2.95
06-249
300
2.95
06-206
80
2.95
06-250
310
2.95
06-207
85
2.95
06-251
320
2.95
06-208
90
2.95
06-252
330
2.95
06-209
95
2.95
06-253
340
2.95
06-210
100
2.95
06-254
350
2.95
06-211
105
2.95
06-255
360
2.95
06-212
110
2.95
06-256
370
2.95
06-213
115
2.95
06-257
380
2.95
06-214
120
2.95
06-258
390
2.95
06-215
125
2.95
06-259
400
2.95
06-216
130
2.95
06-260
410
2.95
06-217
135
2.95
06-261
420
2.95
06-218
140
2.95
06-262
430
2.95
06-219
145
2.95
06-263
440
2.95
06-220
150
2.95
06-264
450
2.95
06-221
155
2.95
06-265
460
2.95
06-222
160
2.95
06-266
470
2.95
06-223
165
2.95
06-267
480
2.95
06-224
170
2.95
06-268
490
2.95
06-225
175
2.95
06-269
500
2.95
06-226
180
2.95
06-281
540
2.95
06-227
185
2.95
06-338
560
2.95
06-228
190
2.95
06-282
580
2.95
06-229
195
2.95
06-283
600
2.95
06-230
200
2.95
06-284
620
2.95
06-240
210
2.95
06-285
640
2.95
06-241
220
2.95
06-286
660
2.95
06-242
230
2.95
06-287
680
2.95
06-243
240
2.95
06-288
700
2.95
Needle & Seat Assemblies
Available with Steel or Viton tips. Steel needles
are uncoated, while the Viton have a tough,
durable poly coating that helps prevent fuel
from seeping through.
VM18 Carbs
06-582.....Needle & Seat Assembly, 1.5 Steel, VM15/172 ..................$19.95
06-584.....Needle & Seat Assembly, 1.8 Steel, VM15/172 ..................$19.95
06-586.....Needle & Seat Assembly, 2.0 Steel, VM15/172 ..................$19.95
VM30-48 Carbs/ Steel
06-560.....Needle & Seat Assembly, 1.5 Steel ............$17.95
06-562.....Needle & Seat Assembly, 1.8 Steel ............$17.95
06-564.....Needle & Seat Assembly, 2.0 Steel ............$17.95
06-566.....Needle & Seat Assembly, 2.5 Steel ............$17.95
06-567.....Needle & Seat Assembly, 3.3 Steel ............$17.95
VM30-48 Carbs/ Viton
06-570.....Needle & Seat Assembly, 1.5 Viton......................................$19.95
06-572.....Needle & Seat Assembly, 1.8 Viton......................................$19.95
06-574.....Needle & Seat Assembly, 2.0 Viton......................................$19.95
06-576.....Needle & Seat Assembly, 2.5 Viton......................................$19.95
TM & TMX Carbs
06-580.....Needle & Seat Assembly, 1.8 TMX ..........$19.95
06-587.....Needle & Seat Assembly, 1.5 TM24 ........$19.95
06-725.....Needle & Seat Float Assembly,
1.5 TM-38 ................................................$47.85
Needle Jets
Brass needle jets are for VM carburetors with the
exception of the 389 series, which is for flat slide
carbs. The 480 series is the same as the 166 series
except it has a large well (Bigger hole). All are listed
from lean to rich. Sold individually.
Large Hex Main Jets
Fit all VM, TM and TMX carbs. Sold individually, these main jets
come in increments of 20, starting at 720 and ending at 1100.
Part #
06-289
06-300
06-302
06-304
06-306
06-308
06-310
06-312
06-314
06-316
Size
720
740
760
780
800
820
840
860
880
900
Price
2.95
7.45
7.45
7.45
7.45
7.45
7.45
7.45
7.45
7.45
Part #
06-318
06-320
06-322
06-324
06-326
06-328
06-330
06-332
06-334
06-336
Size
920
940
960
980
1000
1020
1040
1060
1080
1100
Price
7.45
7.45
7.45
7.45
7.45
7.45
7.45
7.45
7.45
7.45
36
224 Series / VM40-48mm
06-079…...224 Series Needle
06-080…...224 Series Needle
06-081…...224 Series Needle
06-082…...224 Series Needle
06-083…...224 Series Needle
06-084…...224 Series Needle
06-085.…..224 Series Needle
06-086.…..224 Series Needle
06-087.…..224 Series Needle
06-088.…..224 Series Needle
06-089.…..224 Series Needle
06-090.…..224 Series Needle
06-091.…..224 Series Needle
06-092.…..224 Series Needle
06-093.…..224 Series Needle
06-094.…..224 Series Needle
06-095.…..224 Series Needle
06-096.…..224 Series Needle
06-097.…..224 Series Needle
06-098.…..224 Series Needle
06-099.…..224 Series Needle
06-100.…..224 Series Needle
Jet, Z-0 ................................................$17.95
Jet, Z-2 ................................................$17.95
Jet, Z-4 ................................................$17.95
Jet, Z-5 ................................................$17.95
Jet, Z-6 ................................................$17.95
Jet, Z-8 ................................................$17.95
Jet, AA-0 ..............................................$17.95
Jet, AA-1 ..............................................$17.95
Jet, AA-2 ..............................................$17.95
Jet, AA-3 ..............................................$17.95
Jet, AA-4 ..............................................$17.95
Jet, AA-5 ..............................................$17.95
Jet, AA-6 ..............................................$17.95
Jet, AA-8 ..............................................$17.95
Jet, BB-0 ..............................................$17.95
Jet, BB-5 ..............................................$17.95
Jet, CC-0 ..............................................$17.95
Jet, CC-5 ..............................................$17.95
Jet, DD-0 ..............................................$26.85
Jet, DD-5 ..............................................$26.85
Jet, EE-0 ..............................................$26.85
Jet, EE-5 ..............................................$26.85
Fuel Systems
Order Line 800-883-0294
Needle Jets Continued...
$12.95 159 Series
166 Series
480 Series 247 Series 389 Series
each VM30-VM36 VM38-VM39-5 VM38-VM39.5 Many OEM’s TM32-TM38
0-4
06-035
0-5
06-036
0-6
06-001
06-015
0-7
0-8
06-002
06-016
06-351
06-039
06-061
06-352
06-062
06-353
06-063
06-354
06-355
06-040
06-003
06-017
P-1
P-2
06-060
06-038
0-9
P-0
06-037
06-041
06-042
06-004
06-018
P-3
06-043
(Carb Slides Continued)
VM40-46 Aluminum (LH Idle)
06-179…..VM40-46 Carb Slide, 1.5, Aluminum....................................$49.95
06-180…..VM40-46 Carb Slide, 2.0, Aluminum....................................$49.95
06-181…..VM40-46 Carb Slide, 2.5, Aluminum....................................$49.95
06-182…..VM40-46 Carb Slide, 3.0, Aluminum....................................$49.95
TMX35-40.2 Aluminum
06-185…..TMX35-40.2 Carb Slide, 2.5 ................................................$34.00
06-186…..TMX35-40.2 Carb Slide, 3.0 ................................................$34.00
06-187…..TMX35-40.2 Carb Slide, 3.5 ................................................$34.00
06-188…..TMX35-40.2 Carb Slide, 4.0 ................................................$34.00
06-189…..TMX35-40.2 Carb Slide, 4.5 ................................................$34.00
Needle Shim Kit
06-044
Mikuni jet needles control fuel metering from 1/4 to 3/4 throttle and have five e-clip positions in .040” increments. Using
the .010”, .020” and .030” precision cut shims allow calibration in up to 20 different needle positions. Available in twin
carb or triple carb kits.
P-4
06-005
06-019
06-045
06-064
P-5
06-006
06-020
06-046
06-065
P-6
06-007
06-021
06-047
06-066
06-356
P-8
06-008
06-022
06-049
06-067
06-357
Q-0
06-0081
06-023
06-051
06-068
06-358
Q-2
06-0082
06-024
06-053
06-069
06-359
Q-4
06-0083
06-025
06-055
06-070
06-360
Q-5
06-0084
06-026
06-056
06-071
Jet Needles
Q-6
06-0085
06-027
06-057
06-072
06-361
The Jet Needle controls the fuel mixture
in the mid-range (1/4-3/4) throttle position. 6 Series is for 30-39.5mm carbs
and the 7 Series is for 40-48mm carbs.
TMX carbs use the 6EJ Series. Needles with one letter are
single taper and needles with two letters are double taper.
Needles are listed lean to rich.
P-7
06-048
Q-3
06-808…..Needle Shim Kit, Twin............................................................$9.95
06-809…..Needle Shim Kit, Triple ........................................................$12.95
06-054
Q-7
06-058
Q-8
06-0086
06-028
06-073
06-362
R-0
06-009
06-029
06-059
06-074
06-363
R-2
06-010
06-030
06-075
06-364
R-4
06-011
06-031
06-076
06-365
R-5
06-012
06-032
R-6
06-013
06-033
06-077
06-366
R-8
06-014
06-034
06-078
06-367
Carb Slides
Brass slides are chrome plated and aluminum
slides are anodized. Brass Slides resist throttle
freeze up in cold weather conditions. Slides are
listed rich to lean.
VM30-34 Brass (LH Idle)
06-160…..VM30-34 Carb Slide, 1.5, Brass ..........................................$31.25
06-161…..VM30-34 Carb Slide, 2.0, Brass ..........................................$31.25
06-162…..VM30-34 Carb Slide, 2.5, Brass ..........................................$31.25
06-163…..VM30-34 Carb Slide, 3.0, Brass ..........................................$31.25
06-164…..VM30-34 Carb Slide, 3.5, Brass ..........................................$31.25
VM36 Brass (LH Idle)
06-165…..VM36 Carb Slide, 1.5, Brass ..............................................$43.95
06-166…..VM36 Carb Slide, 2.0, Brass ..............................................$43.95
06-167…..VM36 Carb Slide, 2.5, Brass ..............................................$43.95
06-168…..VM36 Carb Slide, 3.0, Brass ..............................................$43.95
06-169…..VM36 Carb Slide, 3.5, Brass ..............................................$43.95
VM38-39.5 Brass (RH Idle)
06-170…..VM38-39.5 Carb Slide, 1.5, Brass ......................................$39.95
06-171…..VM38-39.5 Carb Slide, 2.0, Brass ......................................$39.95
06-172…..VM38-39.5 Carb Slide, 2.5, Brass ......................................$39.95
06-173…..VM38-39.5 Carb Slide, 3.0, Brass ......................................$39.95
06-174…..VM38-39.5 Carb Slide, 3.5, Brass
VM40-46 Brass(LH Idle)
06-175…..VM40-46 Carb Slide, 1.5, Brass ..........................................$42.50
06-176…..VM40-46 Carb Slide, 2.0, Brass ..........................................$42.50
06-177…..VM40-46 Carb Slide, 2.5, Brass ..........................................$42.50
06-178…..VM40-46 Carb Slide, 3.0, Brass ..........................................$42.50
Carb Slides Continued...
37
FUEL SYSTEMS
30-39.5mm Carbs
06-370…..Jet Needle, 6F9......................................................................$5.40
06-371…..Jet Needle, 6DH2 ..................................................................$5.40
06-372…..Jet Needle, 6DH3 ..................................................................$5.40
06-373…..Jet Needle, 6DH4 ..................................................................$5.40
06-374…..Jet Needle, 6DH7 ..................................................................$5.40
06-375…..Jet Needle, 6DH8 ..................................................................$5.40
06-376…..Jet Needle, 6DJ30 ................................................................$5.40
40-48mm Carbs
06-377…..Jet Needle, 7F7......................................................................$7.10
06-378…..Jet Needle, 7F6......................................................................$7.10
06-379…..Jet Needle, 7DH2 ..................................................................$7.10
06-380…..Jet Needle, 7DH3 ..................................................................$7.10
06-381…..Jet Needle, 7DH4 ..................................................................$7.10
06-382…..Jet Needle, 7DH5 ..................................................................$7.10
06-383…..Jet Needle, 7DJ2 ..................................................................$7.10
TMX Carbs
06-384…..Jet Needle, 6EJ12-58 ............................................................$5.40
06-385…..Jet Needle, 6EJ12-57 ............................................................$5.40
06-386…..Jet Needle, 6EJ12-56 ............................................................$5.40
06-387…..Jet Needle, 6EJ12-55 ............................................................$5.40
06-388…..Jet Needle, 6EJ12-54 ............................................................$5.40
Needle Positioning Clips
06-602…..Clip, Needle Positioning, VM30-39.5 ....................................$1.45
06-604…..Clip, Needle Positioning, VM40-48 and TMX ........................$1.45
Fuel Systems
Order Line 800-883-0294
UFO
Air Density Gauge
Ultimate Flow Optimizer. A simple, trouble free, aerodynamic piece that fits
Mikuni carburetors from 30mm to 44mm.
The UFO makes a normal round slide
carburetor out-perform the more expensive flat slide carburetor by eliminating turbulence and increasing air flow and
velocity, creating a highly atomized fuel charge. Normal gains
are 3/4 HP to 1 HP per 100cc of engine displacement.
As air density changes with weather conditions,
you should re-jet your carbs to maintain optimum
horsepower and throttle response. Air density is
measured as a percentage. When it changes up
or down, the difference from your baseline is the percentage
you change your main jet. A Rad Wheel jetting
guide will help you calculate the jet required
without the use of math. The air density gauge
comes complete with padded carrying case.
Jetting guides are sold separately. Air Density
Gauges cannot be shipped by air.
30-34mm Carbs
06-960…..UFO, 30 to 34mm Carbs, Single ........................................$30.00
06-961…..UFO, 30 to 34mm Carbs, Twin ............................................$59.95
06-962…..UFO, 30 to 34mm Carbs, Triple ..........................................$89.95
Polaris & Ski-Doo 36mm Carbs
06-964…..UFO, Polaris & Ski-Doo, 36mm Carbs, Single ....................$30.00
06-965…..UFO, Polaris & Ski-Doo, 36mm Carbs, Twin ......................$59.95
06-966…..UFO, Polaris & Ski-Doo, 36mm Carbs, Triple ....................$89.95
Arctic 36mm & All 38mm Carbs
06-970…..UFO, 36mm Arctic Cat, All 38mm Carbs, Single ................$30.00
06-971…..UFO, 36mm Arctic Cat, All 38mm Carbs, Twin....................$59.95
06-972…..UFO, 36mm Arctic Cat, All 38mm Carbs, Triple ..................$89.95
40-44mm Carbs
06-976…..UFO, 40 to 44mm Carbs, Single ........................................$30.00
06-977…..UFO, 40 to 44mm Carbs, Twin ............................................$59.95
06-978…..UFO, 40 to 44mm Carbs, Triple ..........................................$89.95
Gauge
06-864…..Air Density Gauge..............................................................$144.95
Jetting Guides
06-865.....Jetting Guide, Mikuni Hex, 50-240 ......................................$16.95
06-866.....Jetting Guide, Mikuni Hex, 140-720 ....................................$16.95
06-867.....Jetting Guide, Keihin Hex, 90-220........................................$16.95
06-868.....Jetting Guide, Mikuni Round, 100-210 ................................$16.95
06-869.....Jetting Guide, Thousandths Jet, .055-.130 Diameter ..........$16.95
VFORCE 3
The best advancement in reed technology
comes to you from Moto-Tassinari. Their
new Snap-together cage uses symmetrical
reed petals, eliminating the need for different “Inner” and “Outer” replacement petals.
The new reed tip shape accelerates air mixture, ensuring increased airflow for increased power. The
new design has completely eliminated the need for screws.
Aluminum Manifold kits are available for 44mm applications.
Replacement boots for these kits are also sold separately.
Dial-A-Jet
FUEL SYSTEMS
Now you can operate your snowmobile in a broad altitude and/or temperature range without having to rejet. DialA-Jet fits any style carburetor and
works on stock or modified engines, improving performance
and fuel economy. Each Dial-A-Jet has five settings. The
Dually Kit is recommended for carburetors 38mm and up,
especially on high horsepower machines. Comes complete
with a Pro Mount Kit and easy to follow instructions. Dually
update kits come with components needed to update a
regular Pro Mount Kit to Dually specifications.
Arctic Cat
06-984 ....VForce III Reed Valves, V3110-682A-2..............................$246.95
06-848 ....VForce III Replacement Petals, 3P682M (two petal) ..........$59.95
06-496 ....VForce III Replacement Gasket, G3110 ................................$3.99
Single
06-128…..Single Dually Dial-A-Jet Update ..........................................$67.50
Dual
06-129…..Twin Dial-A-Jet ..................................................................$119.95
06-130…..Twin Dually Dial-A-Jet........................................................$199.95
06-131…..Twin Dually Dial-A-Jet Update ..........................................$119.95
Triple
06-132…..Triple Dial-A-Jet ................................................................$159.95
06-133…..Triple Dually Dial-A-Jet ......................................................$289.95
06-134…..Triple Dually Dial-A-Jet Update..........................................$159.95
Mounting Bracket
06-138…..Limited Space Mounting Bracket, 36 through 39.5mm..........$9.95
06-139…..Limited Space Mounting Bracket, 40 through 44mm ............$9.95
Fits:
‘98-’02
All
06-983 ......VForce III Reed Valves, V3110-682A-3 ............................$330.95
06-848 ......VForce III Replacement Petals, 3P682M (two petal)..........$59.95
06-496 ......VForce III Replacement Gasket, G3110 ..............................$3.99
Fits:
Triples
All
06-985 ......VForce III Reed Valves, V3112-873B-2 ............................$246.95
06-995 ......VForce III Replacement Petals, 3P883A (three petal)........$59.95
06-495 ......VForce III Replacement Gasket, G3112 ..............................$3.99
Fits:
Remote Mount Kit
With this kit, you can mount your Dial-A-Jet bodies on the
air box above the carburetors. This allows the air box to fit
normally.
F5/F6/F7, ZR/ZL 800/900
F600 LXR/SnoPro
F800 LXR/SnoPro/TS LE
M500/M600/M700/M800
Crossfire 500/600/800/SnoPro
All
All
All
All
All
06-967 ......VForce III Reed Valves, V3112-904-2 ..............................$246.95
06-969 ......VForce III Replacement Petals, 3P904A (four petal)..........$59.95
06-495 ......VForce III Replacement Gasket, G3112 ..............................$3.99
06-125…..Remote Mount Kit ..................................................................$9.95
Fits:
Pocket Tuner
Yamaha
06-993 ......VForce
06-848 ......VForce
06-499 ......VForce
06-999 ......VForce
A handy pocket-sized calculator that
can be used to determine required
jetting changes in Mikuni carburetors
due in major part to ambient temperature, altitude or both.
06-862…..Pocket Tuner..........................................................................$6.00
Sno Pro 440
ZL/ZR 500/600
Fits:
38
Crossfire 1000/SnoPro
M1000/F1000/Crossfire 1000
F1000 LXR/SnoPro
III
III
III
III
All
2007
All
Reed Valves, V3141-682A-3..............................$330.9
Replacement Petals, 3P682M (two petal)..........$59.95
Replacement Gasket, G3141 ..............................$3.99
Spacer Kit, SK141-3 ..........................................$64.95
Two-Stroke Triples
Continued on Next Page...
All
Fuel Systems
Ski-Doo
06-988 ......VForce
06-996 ......VForce
06-497 ......VForce
06-997 ......VForce
Fits:
III
III
III
III
Order Line 800-883-0294
K & N Filters &
Prechargers
Reed Valves, V3120-794A-3............................$330.95
Replacement Petals, 3P794A (four petal)..........$59.95
Replacement Gasket, G3120 ..............................$3.99
Spacer Kit, SK120-3 ..........................................$64.95
Formula III 600
Formula III 600/700/800
Mach 1 700, Mach Z 800
Mach Z 780
Grand Touring 700
These K & N air filters are the toughest available. They can be stretched
up to 1/8” to fit in-between sizes.
Mikuni VM Carbs: 34mm = 2 1/4”, 36 & 38mm = 2 7/16”, 40,
44, 46 & 48mm = 2 3/4”. Prechargers are listed directly under
for proper application.
1995 (requires spacer kit)
All
‘97-’04
‘94-’96 (requires spacer kit)
‘97-’00
06-989 ......VForce III Reed Valves, V3120-794A-2............................$246.95
06-996 ......VForce III Replacement Petals, 3P794A (four petal)..........$59.95
06-497 ......VForce III Replacement Gasket, G3120 ..............................$3.99
Fits:
500 SS
MXZ 440/500/600
06-990 ......VForce III Reed Valves, V3123-883B-2............................$304.95
06-995 ......VForce III Replacement Petals, 3P883A (three petal)........$59.95
06-503 ......VForce III Replacement Gasket, G3122 ..............................$3.99
Fits:
ZX Chassis (Carb), 600HO/800
‘01-’07
06-991 ......VForce III Reed Valves, V3124-873B-2............................$304.95
06-995 ......VForce III Replacement Petals, 3P883A (three petal)........$59.95
06-503 ......VForce III Replacement Gasket, G3122 ..............................$3.99
Fits:
REV Chassis (carb)
600HO/800/800HO/800R
‘03-’08
‘03-’08
06-974 ......VForce III Reed Valves, V3126-883B-2............................$304.95
06-995 ......VForce III Replacement Petals, 3P883A (three petal)........$59.95
06-503 ......VForce III Replacement Gasket, G3122 ..............................$3.99
Fits:
REV Chassis (SDI), 600 HO
‘03-’08
06-992 ......VForce III Reed Valves, V31276-873B-2..........................$304.95
06-995 ......VForce III Replacement Petals, 3P883A (three petal)........$59.95
06-503 ......VForce III Replacement Gasket, G3122 ..............................$3.99
Fits:
600 E-TEC
2009
Polaris
06-986 ......VForce III Reed Valves, V3130-794A-2............................$246.95
06-996 ......VForce III Replacement Petals, 3P794A (four petal)..........$59.95
06-498 ......VForce III Replacement Gasket, G3130 ..............................$3.99
Fits
Domestic Twins 440/500/600/700/800
All(except below)
06-987 ......VForce III Reed Valves, V3130-794A-3............................$330.95
06-996 ......VForce III Replacement Petals, SP794A (four petal) ........$59.95
06-498 ......VForce III Replacement Gasket, G3130 ..............................$3.99
Fits:
Triples
All
06-998 ......VForce III Reed Valves, V3132-873A-2............................$246.95
06-847 ......VForce III Replacement Petals, 3P883B (three petal)........$59.95..
06-500 ......VForce III Replacement Gasket, G3132 ..............................$3.99
Fits:
600 (carb)
‘08-’09
06-968 ......VForce III Reed Valves, V3132-873F-2 ............................$246.95
06-847 ......VForce III Replacement Petals, 3P883B (three petal)........$59.95
06-500 ......VForce III Replacement Gasket, G3132 ..............................$3.99
Fits:
600/700/800 Clean Fire Injection (CFI)
‘07-’09
06-975 ......VForce III Reed Valves, V3132-873D-2............................$246.95
06-847 ......VForce III Replacement Petals, 3P883B (three petal)........$59.95
06-500 ......VForce III Replacement Gasket, G3132 ..............................$3.99
Fits:
700/900 Fusion
K & N Servicing
‘05-’06
Replacement Petals
Through evolving technology, Moto Tassinari has made changes in the number of petals in the reed cages. Earlier versions are listed below. Order one
set per reed cage.
06-994 ......VForce Reed Petals, AC/Yam, 3P683A (three petal) ........$59.95
K & N cleaner & oil is designed to recharge
any K & N air filter. It will restore air flow efficiency so that your K & N filter performs just
like new. Sold individually or in kit form.
Fits: All Arctic Triples, ‘98-’02 Arctic SnoPro 440, All Arctic
ZL/ZR500/600, All Yamaha Twins & Triples
06-910.....K & N Filter Oil, 12 oz. Aerosol Can ......................................$9.25
06-912.....K & N Filter Cleaner, 32 oz ................................................$12.95
06-969 ......VForce Reed Petals, AC/Ski-Doo, 3P904A (four petal)......$59.95
Fits: Arctic F5/F6/F7, Arctic ZR/ZL 800/900, Ski-Doo 700/800 Twin &
600HO/SDI
Delta II Replacement Petals
06-493 ......Delta II Replacement Petals, 2P1171, Arctic & Yamaha ....$59.95
06-494 ......Delta II Replacement Petals, 2P1272, Polaris & Ski-Doo ..$59.95
Recharger Service Kit
Includes 6.5 oz. aerosol can Air Filter Oil and 12 oz. of Air Filter Cleaner.
06-914…..K & N Recharger Kit ............................................................$14.30
39
FUEL SYSTEMS
2 1/4” ID Straight
06-900…..K & N, 2 1/4” ID, 3 1/4” OD, 4” Long, RU-0600 ..................$41.95
06-920…..K & N Precharger, 3 1/2” OD, 4” Long, RU-0500PK ..........$21.15
06-901…..K & N (20 degree), 2 1/4” ID, 3 1/2” OD, 5” Long, RU-1710$42.95
06-921…..K & N Precharger, 3 1/2” OD, 6” Long, RU-0520PK ..........$21.15
2 7/16” ID Straight
06-902…..K & N, 2 7/16” ID, 3 1/2” OD, 4” Long, RU-0800 ................$44.95
06-920…..K & N Precharger, 3 1/2” OD, 4” Long, RU-0500PK ..........$21.15
06-903…..K & N, 2 7/16” ID, 3 1/2” OD, 6” Long, RU-0820 ................$48.25
06-921…..K & N Precharger, 3 1/2” OD, 6” Long, RU-0520PK ..........$21.15
06-907…..K & N (20 degree), 2 7/16” ID, 3 3/4” OD, 6” Long,
RU-1770 ..............................................................................$49.95
06-926…..K & N Precharger, 4 1/2” OD, 6” Long, SN-1470PK ..........$21.95
06-909…..K & N (20 degree), 2 7/16” ID, 3 3/4” OD, 4” Long,
RU-1750 ..............................................................................$44.95
06-922…..K & N Precharger, 4 1/2” OD, 4” Long, 22-8012PK ............$21.95
2 3/4” ID Straight
06-904…..K & N, 2 3/4” ID, 4 1/2” OD, 4” Long, RU-0900 ..................$43.95
06-922…..K & N Precharger, 4 1/2” OD, 4” Long, 22-8012PK ............$21.95
06-906…..K & N (10 degree), 2 3/4” ID, 4” OD, 5” Long, RU-1460 ....$48.25
06-924…..K & N Precharger, 4 1/2” OD, 6” Long, RU-1460PK ..........$21.95
06-908…..K & N (10 degree), 2 3/4” ID, 4” OD, 6” Long, RU-1470 ....$42.95
06-911…..K & N (20 degree), 2 3/4” ID, 4” OD, 6” Long, RU-3190 ....$43.95
06-926…..K & N Precharger, 4 1/2” OD, 6” Long, SN-1470PK ..........$21.95
2 7/16” ID Tapered
All have 3 3/4” Base and 3” End Cap.
06-890…..K & N Tapered (20 degree), 2 7/16” ID, 4” Long,
SN-2530................................................................................$53.75
06-927…..K & N Precharger, Tapered, 3 3/4” x 3”, 4” Long,
SN-2530PK ..........................................................................$21.15
06-892…..K & N Tapered (20 degree), 2 7/16” ID, 6” Long,
SN-2510................................................................................$53.75
06-928…..K & N Precharger, Tapered, 3 3/4” x 3”, 6” Long,
SN-2510PK ..........................................................................$21.15
2 3/4” ID Tapered
All have 4” Base and 3” End Cap.
06-895......K & N Filter (10 degree), 2-3/4” ID, 5” Long, SN-2590 ......$49.95
06-896…..K & N Tapered (10 degree), 2 3/4” ID, 6” Long, SN-2600 ..$49.95
06-899…..K & N Tapered (20 degree), 2 3/4” ID, 6” Long, SN-2620 ..$49.95
06-929…..K & N Precharger, Tapered, 4” x 3”, 6” Long, SN-2600PK..$21.15
3 1/2” ID Tapered
All have 4 5/8” Base and 3 1/2” End Cap.
06-898…..K & N Tapered, 3 1/2” ID, 4 1/2” Long, RU-2790 ................$54.95
06-893…..K & N Tapered, 3 1/2" ID, 4 5/8" OD x 7" Long, RU-3130 ..$54.95
All Through 2007
‘99-’03
Fuel Systems
Order Line 800-883-0294
UNI Filters
Billet Throttle
Assemblies
The UNI Filter is made of polyurethane
”open pore” foam, which allows maximum
engine breathing and excellent air filtering.
Total length is 4”.
Available in one-piece or two-piece
configurations. The one-piece
model will pull up to 48mm while the two-piece model will pull
up to 54mm. Constructed of 6061T6 aluminum, they will outlast your machine.
Filters
06-880…..Uni Filter (34mm), 2 1/4” ID ................................................$14.95
06-882…..Uni Filter (36 & 38mm), 2 1/2”ID ........................................$14.95
06-884…..Uni Filter (40, 44, 46 & 48mm), 2 3/4” ID ............................$17.25
Cleaners/Oil
06-886......Uni Filter Oil, 5.5 oz. Aerosol Can ........................................$7.95
06-888......Uni Filter Cleaner, 16 oz. Aerosol Can ..................................$9.95
06-889......Bel-Ray Foam Filter Oil, 1 Liter bottle ................................$12.65
Assembly
06-802A.....One-Piece Billet Throttle Assembly....................................$46.95
06-799A.....Two-Piece Billet Throttle Assembly ....................................$82.95
Replacement Components
06-806…..Plastic Throttle Lever ..........................................................$10.50
01-087…..Pin, Throttle Lever..................................................................$4.75
01-086…..E-Style Retaining Clip ..............................................................$.15
UNI Snow Pod Filter
A filter specifically designed for snow
applications. Very coarse foam provides
extremely high air flow with minimum filtration. Not for summer use.
Wahl Bros. Hi-Lex
Throttle Cables
06-885.....UNI Snow Pod Filter, 2 1/4'' ID, 3 1/2” OD, 4'' Long ............$17.95
06-887.....UNI Snow Pod Filter, 2 1/2'' ID, 3 1/2” OD, 4'' Long ............$17.95
06-881.....UNI Snow Pod Filter, 2 3/4'' ID, 4 1/2” OD, 6'' Long,
15 Degree ............................................................................$21.95
06-883.....UNI Snow Pod Filter, 3'' ID, 4 1/2” OD, 6'' Long,
15 Degree ............................................................................$21.95
High quality Hi-Lex cables available
for twin, triple and four cylinder
applications with oil injection and non oil injection systems.
Available in several different lengths, choose the one that
best suits your needs. These cables have a 90 degree plastic
elbow that can be snapped on or removed for approaching
the carburetor as needed. The measurements shown are
from the ferrule end to the end of the 90 degree elbow on the
longest cable. Each cable will extend two inches when not
using the 90 degree fitting.
Prefilter Foam
The single foam filter measures 12” x 24” x 3/8” thick. It
allows you the option of trimming for fitting specific needs in
your application or have us cut 1/2” foam for you by the
square foot. This foam can be cleaned and reused many
times and is good for 'over-the-air box' openings.
Dual Throttle Cables
06-823…..TMX Throttle Cable, Dual, 38mm, 33” ................................$54.95
06-822…..Throttle Cable, Dual, 34-38mm, 35” (Champ) ....................$54.95
06-820…..Throttle Cable, Dual, 34-38mm, 40” ....................................$54.95
06-824…..Throttle Cable, Dual, 40-54mm, 27 1/2” ..............................$54.95
06-915…..Throttle Cable, Dual, 40mm-54mm, 39 1/2" ........................$54.95
06-919…..Throttle Cable, Dual w/Oil Injection, 40mm-54mm, 39" ......$62.95
Triple Throttle Cables
06-918…..Triple Throttle Cable, 34mm-38mm, 31 1/2"........................$59.95
06-916…..Triple Throttle Cable, 40mm-54mm, 40 1/2"........................$59.95
06-917…..Triple Throttle Cable, 40mm-54mm, 31 1/2" ......................$59.95
4-Cylinder Throttle Cables
06-827…..Throttle Cable, 4-Cylinder, 40-54mm, 30'' Long ..................$69.95
06-829…..Throttle Cable, 4-Cylinder, 40-54mm, 38'' Long ..................$69.95
Cable Adjuster and Retaining Clip
06-830…..Cable Adjuster, VM & TMX ....................................................$2.25
06-805......Cable Retaining Clip ..............................................................$.95
06-879.....UNI Prefilter Foam, 12 “x 24” x 3/8” ....................................$13.95
06-873.....Air Box Filter Foam, 1/2'' Thick, sq. ft.....................................$5.75
Prefilter Sheet
FUEL SYSTEMS
Water-repellent/breathable pre-filter material that can be
trimmed for custom applications. Use to prolong filter life.
06-871.....Pre-Filter Sheet, 18” x 18”, black, ea. ..................................$19.95
K & N Prechargers
Extend the service period of your filter
by pre-filtering snow or dust from it.
Designed to be run dry and cleaned
with K & N filter cleaner.
Wahl Bros. Single
Throttle Cable
Genuine single pull, Hi-Lex cable from
Wahl Brothers is durable and will pull
40-44mm carbs. Use the adaptor to go to
a 38mm or smaller carburetor. Body length
of Cable is 27 1/2”, while the total length is
just over 31”.
Straight Precharger
06-920.....K & N Precharger (fits 3 1/2” OD, 4” Long), RU-0500PK ....$21.15
06-921.....K & N Precharger (fits 3 1/2” OD, 6” Long), RU-0520PK ....$21.15
06-922.....K & N Precharger (fits 4 1/2” OD, 4” Long), 22-8012PK......$21.95
06-924.....K & N Precharger (fits 4 1/2” OD, 5” Long), RU-1460PK ....$21.95
06-926.....K & N Precharger (fits 4 1/2” OD, 6” Long), SN-1470PK ....$21.95
Taper Precharger
06-927…..K & N Precharger (fits 3 3/4” x 3” x 4” Long), SN-2530PK..$21.15
06-928…..K & N Precharger (fits 3 3/4” x 3” x 6” Long), SN-2510PK..$21.15
06-929…..K & N Precharger (fits 4” x 3” x 6” Long), SN-2600PK........$21.15
06-821…..Single Throttle Cable, 40-44mm, 27 ½” ..............................$54.95
06-830…..Cable Adjuster, VM & TMX ....................................................$2.25
40
Fuel Systems
Order Line 800-883-0294
Aluminum Bodied
Throttle Cables
Running Board Fuel
Tanks
Aluminum bodied throttle cables to fit
your needs. They come with a billet body that can be opened
for cleaning or cable alteration.
06-945
These Champ racing tanks easily rest
on your running board, helping to make
06-959
maneuvering on the fast track more
comfortable. Both style tanks hold 9 quarts/8.52 liters of your
desired octane.
TMX Cables
06-816…..38mm TMX Twin Cable, 33-35” ..........................................$59.95
06-817…..38mm TMX Triple Cable, 33-35”..........................................$69.95
VM Cables
06-815…..38mm Twin Cable, 33-35”....................................................$59.95
06-818…..44mm Twin Cable, 33-35”....................................................$59.95
06-819…..44mm Triple Cable, 33-35” ..................................................$69.95
Cable Adjuster
06-830…..Cable Adjuster, VM & TMX ....................................................$2.25
Tanks
06-959…..Running Board Fuel Tank,
Pre-'05 Champ, 18 1/2” Long x 6 1/2” tall
(Elongated Style) ..................................................................$90.00
06-945…..Running Board Fuel Tank,
Wahl Champ - '05-Present, 12 1/2” tall
(Upright Style) ....................................................................$115.00
Accessories
06-939…..Aluminum Mounting Bracket, Upright Style Champ ............$25.00
06-944…..Cap, Large ..........................................................................$10.45
PowerMadd Throttle
Extension Kit
Tank Assemblies & Components
Finally a well engineered system
that extends your throttle cable
when installing handle bar risers.
The inline adjuster allows fine tuning of cable tension and
slack. Absolutely no modification required; this universal cable
can easily be used with any and all brands. Offers up to 10” of
extension.
The Wahl Bros. Single and Dual tank
assemblies work great for dual purposes or if you need an extra bit of
fuel to make one or more consecutive
runs. Can be used for fuel or lube.
Each small tank holds 1.5 qt/1.42 ltrs.
The inner tank assembly is designed to mount
inside an original fuel tank or shroud. The
assemblies include tank, cap, bracket and fuel
fitting.
06-807.....PowerMadd Throttle Extension Kit ......................................$29.95
Choke Cables
OEM dual and triple choke cables. Includes Lever & Nut.
06-825…..Dual Choke Cable................................................................$52.35
06-826…..Triple Choke Cable ..............................................................$52.35
06-841…..Kit, Choke Lever Repair, Dual ............................................$12.75
Universal
Fuel Tanks
06-950
06-952
Plastic see-through tanks
available in 5 qt., 7 qt., 9 qt., and 10 qt. The 7 qt.,
9 qt. and 10 qt. are tapered for use in oval applications. Caps and brackets sold separately.
06-958
06-953
Tanks
06-950…..5 qt/4.73 ltr Fuel Tank, 12” x 8” x 4 1/4” ..............................$45.00
06-952…..7 qt/6.62 ltr Fuel Tank, 14” x 8 1/4” x 4 1/2” ........................$50.00
06-958…..9 qt/8.52 ltr Fuel Tank, 15 3/4'' x 9 1/2'' x 4 3/8’' ................$80.00
06-953…..10 qt/9.46 ltr Fuel Tank, 15'' x 9'' x 5 3/4'' ............................$75.00
Mounting Bracket
06-951…..Aluminum Mounting Bracket, 5 qt. ......................................$15.00
06-949…..Aluminum Mounting Bracket, 7 qt. ......................................$20.00
06-941…..Aluminum Mounting Bracket, 9 qt........................................$18.00
06-948…..Aluminum Mounting Bracket, 10 qt......................................$20.00
Cap
06-944…..Cap, Large ..........................................................................$10.45
Lube Tank
Plastic see-through tank designed
to fit under your running board.
Total length is 22” and will hold 3.3
qts/3.12 ltrs.
Tank
06-956…..Wedge Lube Tank ................................................................$50.00
Components
06-944…..Cap, Large ..........................................................................$10.45
06-766…..90 Degree Fuel Tank Fitting w/Grommet, 3/16'' & 1/4”..........$4.25
Wahl Bros. Drag Tank
The latest drag tank from Wahl Bros.
Installation is easy by just riveting the aluminum bracket to the top of your tunnel. Order
all components separately.
Fuel Caps
06-942…..Fuel Tank, 2.5 qt/2.37 ltr, 7 3/4” x 8 ½”x 4” ........................$45.00
06-943…..Aluminum Mounting Bracket, 2.5 qt.....................................$15.00
06-936…..Fuel Cap, Small ....................................................................$6.50
06-783A...90 Degree Fuel Tank Fitting w/Grommet, 3/16” & 1/4” ..........$4.25
06-767A...90 Degree Fuel Tank Fitting w/Grommet, 3/8” ....................$10.95
06-936....Cap, Small ..............................................................................$6.50
06-944....Cap, Large ............................................................................$10.45
06-935....Cap, Large, Non-vented ........................................................$10.45
41
FUEL SYSTEMS
Tank Assemblies
06-930A...Dual Tank Assembly ............................................................$96.95
06-932A...Single Tank Assembly ........................................................$49.95
06-954A...Inner Fuel Tank Assembly ....................................................$49.95
Replacement Parts
06-931…..Dual Plate ............................................................................$15.00
06-933…..Single Plate..........................................................................$14.00
06-938…..Clamp, Dual Tank ..................................................................$8.50
06-940…..Clamp, Single Tank ................................................................$3.50
06-934…..Fuel Tank, 1.5qt/1.42 ltrs, 4 3/4” wide x 6” long x 4” tall......$25.50
06-936…..Cap, Small ............................................................................$6.50
06-783A...90 Degree Fuel Tank Fitting, plastic ....................................$4.25
06-947…..Aluminum Bracket, Inner Fuel Tank ....................................$15.00
06-770…..Replacement Grommet, 3/16” & 1/4” ....................................$1.25
Fuel Systems
Order Line 800-883-0294
Lube Kit
Impulse Fitting
Kit includes one dual pump, one shutoff valve,10’ fuel line, two through the
tunnel 90° fittings, two brass fittings
for through rail, four side lube fittings
with inserts and four t-fittings.
A brass, 1” long, fitting for 3/16” or 1/4” fuel
line. Can be used as an impulse fitting in
the engine, fuel pump, or as a lube line fitting in the suspension.
06-697.....Brass Impulse Fitting, Press In, ea. ......................................$3.95
06-696.....Brass Impulse Fitting, 1/4”-20 Thread, ea. ............................$4.75
Kit
06-785A…Lube Kit..............................................................................$119.95
Replacement Components
06-763A…Side Lube Fitting w/Clamp ....................................................$8.95
06-764…..Fuel Line T-Fitting, 3/16” & 1/4'' ............................................$1.85
06-766…..90 Degree Fuel Tank Fitting w/Grommet, 3/16'' & 1/4'' ........$4.25
06-740…..Fuel Line, 10 ft., 3/16'' ID ......................................................$9.95
06-710…..Fuel Pump, Dual Round (Flush Mount) ..............................$29.95
06-772…..Fuel Shut Off Valve, 1/4'’......................................................$11.50
02-349…..Aluminum Lube Line Insert, .050” ID ....................................$2.15
06-697…..Brass Lube Fitting ..................................................................$3.95
Fuel Filters
In-line Filters
06-776…..Fuel Filter, 3/16” to 1/4”, small ..............................................$2.30
06-778…..Fuel Filter, 3/16” to 1/4”, large ..............................................$2.30
In-tank Filters
06-774…..In Tank Fuel Filter w/Screen, 3/16” to 1/4” ............................$3.25
06-784…..Brass Fuel Pickup w/Strainer, 3/16” to 1/4” ..........................$4.25
06-775…..In Tank Fuel Filter w/Screen, 3/8” ..........................................$9.95
Aluminum Fuel Cap
Weldment
Fuel Line/ Lube Line
The highest quality clear line available.
Not affected by cold temperatures. ID's
are listed.
This aluminum tank cap weldment makes building custom aluminum tanks much easier.
1/8”
06-730.....Fuel
06-732.....Fuel
3/16”
06-740.....Fuel
06-742.....Fuel
06-743.....Fuel
1/4”
06-750.....Fuel
06-752.....Fuel
06-754.....Fuel
5/16”
06-753.....Fuel
3/8”
06-756.....Fuel
06-757.....Fuel
Large
06-957…..Aluminum Fuel Tank Cap Weldment, Large ........................$27.50
06-944…..Cap, Large ..........................................................................$10.45
Small
06-875…..Aluminum Fuel Tank Cap Weldment, Small ........................$27.50
06-936…..Cap, Small ............................................................................$6.50
Fuel Fittings
Fuel tank and lube tank fittings and grommets.
FUEL SYSTEMS
T-Fittings
06-760…..Fuel Line T-Fitting, 1/8” ..........................................................$1.00
06-762…..Fuel Line T-Fitting, 1/4” to 1/8” (fuel line to primer) ..............$1.25
06-764…..Fuel Line T-Fitting, 1/4” (also fits 3/16”) ................................$1.85
Line, 10 ft., 1/8” ID........................................................$10.50
Line, 25 ft., 1/8” ID........................................................$24.95
Line, 10 ft., 3/16” ID........................................................$9.95
Line, 25 ft., 3/16” ID......................................................$24.75
Line, 100 ft., 3/16” ID....................................................$96.95
Line, 10 ft., 1/4” ID........................................................$13.25
Line, 25 ft., 1/4” ID........................................................$32.95
Line, 100 ft., 1/4” ID ....................................................$119.95
Line, 5 ft., 5/16” ID........................................................$13.95
Line, 8 ft., 3/8” ID..........................................................$26.95
Line, 32 ft., 3/8” ID......................................................$107.50
Fuel Line Quick-Disconnect
Fuel line quick couplers available in 1/4” and 5/16”.
Withstand temperatures -40°F to 180°F. Sold as a set. Made
in the USA.
90 Degree
06-766…..90° Metal Fuel Tank Fitting w/Grommet, 3/16” & 1/4" ..........$4.25
06-787A...90° Plastic Fuel Tank Fitting w/Grommet, 3/16” & 1/4"..........$4.75
06-768…..90° Dual Fuel Tank Fitting, 3/16” & 1/4” ..............................$4.50
06-788…..90° Fuel Tank Fitting w/Grommet, 5/16" ................................$4.95
06-767A...90° Fuel Tank Fitting w/Grommet, 3/8” Plastic,
w/o In Tank Hose Connection Fitting ..................................$10.95
06-783A...90° Fuel Tank Fitting w/Grommet,
3/16 & 1/4”, w/o In Tank Hose Connection Fitting, Drag ......$4.25
06-793….Fuel Line Quick Coupler, 1/4”, ea. ........................................$18.95
06-794….Fuel Line Quick Coupler, 5/16”, ea. ......................................$18.95
Fyre Jacket
The fire retardant heat sleeve works great
near brake components, exhaust systems
and high wear points. 3/8” ID fits over
spark plug wires, cables 1/8”, 3/16” & 1/4”
fuel line. The 5/8” ID fits over the 3/8” ID
hose or two 1/4” lines.
Straight
06-769A...Straight Fuel Tank Fitting
w/ Grommet, 3/8”, plastic ....................................................$10.95
08-199….Fyre Jacket, 3/8” ID x 30” ....................................................$17.95
08-201….Fyre Jacket, 5/8” ID x 30” ..............................................$19.95
Impulse Line
Made by Goodyear, this black rubber line will withstand 50
PSI and over 250 degree's Fahrenheit. Sold by the foot.
Grommets
06-770…..Grommet Only, for 3/16”, 1/4” & 5/16” Fitting ........................$1.25
06-771…..Grommet Only, for 3/8” Fitting ..............................................$6.35
06-728….Black 1/4" Impulse Line, ft ......................................................$1.60
42
Fuel Systems
Order Line 800-883-0294
Fuel Shut Off Valves
Power Jet Kit
The plastic valves fit 1/4” fuel
line and can be used either as a
dash-mount or in-line. Nut is
included.
Power Jet Kits are used in two-stroke
engine applications to improve mid-range
throttle response and add additional fuel to
wide open throttle conditions. Kit may be
installed easily on Mikuni TM and VM series
carburetors.
Plastic
06-777.....Fuel Shut Off Valve, 1/4”, Plastic In-Line, 90 degree ..........$14.95
06-779.....Fuel Shut Off Valve, 1/4”, Plastic In-Line, Straight ..............$14.95
06-789.....Fuel Shut Off Valve, 5/16”, Plastic In-Line, 90 degree ........$10.95
06-146.....Power Jet Kit ........................................................................$21.95
Metal
06-772.....Fuel Shut Off Valve, 1/4”, Metal, 90 degree ........................$11.50
06-791.....Fuel Shut Off Valve, 5/16”, Metal, Straight ..........................$11.95
06-773.....Fuel Shut Off Valve, 3/8”, Metal, 90 degree ........................$29.95
Reed Spacer Torque
Kits
Fuel Pumps
These CNC machined aluminum
spacers are designed to pull the
reed cage out of the intake tract,
allowing more time for the transfers to be filled. They help
increase the torque curve in the lower part of the RPM range,
increase overall performance and offer quicker throttle
response. Gains of up to 3 hp can be seen in twin engines
from low to mid range. Kits are complete with longer bolts
and washers, spacers, all gaskets and instructions.
Genuine Mikuni Fuel pumps and Rebuild
kits.
Single
06-700…..Fuel Pump, Single Round, 35 Ltr/Hr ..................................$65.50
06-701…..Fuel Pump, 5/16” Single Round, (High Output) 65 Ltr/Hr ..$68.95
06-702…..Fuel Pump, Single Rectangular, 14 Ltr/Hr ..........................$22.95
Dual
06-710…..Fuel Pump, Dual Round (Flush Mount), 35 Ltr/Hr ..............$29.95
06-704…..Fuel Pump, Dual Round, 35 Ltr/Hr ......................................$29.95
06-706…..Fuel Pump, Dual Round (High Output), 65 Ltr/Hr ..............$52.95
Triple
06-708…..Fuel Pump, Triple Round, 35 Ltr/Hr ....................................$29.95
06-709…..Fuel Pump, Triple Square, 3/8” Inlet (High Output),
65 Ltr/Hr................................................................................$90.95
Arctic Cat
06-833…..Arctic Cat Reed Spacer Torque Kit, Small Twins- 440,
500, & 600's, (Laydowns not included) ................................$69.99
06-834…..Arctic Cat Reed Spacer Torque Kit, Big Twins- 800/900 &
F Series- F5, F6 & F7..........................................................$69.99
Polaris
06-836…..Polaris Reed Spacer Torque Kit, Domestic Twins (Pre HO) $69.99
06-837…..Polaris Reed Spacer Torque Kit, Triples ..............................$89.99
Ski-Doo
06-838…..Ski-Doo Reed Spacer Torque Kit, 600HO, 700 & 800 twins,
(can replace stock spacer 800 HO)......................................$69.99
Rebuild Kits
06-712…..Fuel Pump Rebuild Kit, Rectangular Pump..........$9.20
06-698…..Fuel Pump Rebuild Kit, Round ..........................$14.45
06-699…..Fuel Pump Rebuild Kit, Round High Output ......$20.50
Primer Pump Kit
Includes Primer, 4 ft. of 1/8” fuel line,
one 1/8” x 1/4” “T” fitting, two 1/8” “T” fittings and three Carb Inlet fittings.
SLP Boost Bottle
06-780A...Primer Pump Kit ..................................................................$24.95
Replacement Components
06-781.....Primer Pump Only ................................................................$14.95
06-782.....Carb Inlet Fitting ....................................................................$2.45
06-760.....Fuel Line T-Fitting, 1/8” ..........................................................$1.00
06-762.....Fuel Line T-Fitting, 1/4” to 1/8” ..............................................$1.25
06-980…..SLP Boost Bottle '99-'02 500/600 Small Block VES Twins $35.95
TPI Valves
Polaris Air Box Fittings
The TPI Valve is designed to increase
airflow into your air box and carburetors. This is one of the fastest and easiest ways to increase performance.
Totally adjustable, the TPI allows you to determine exactly
how much to increase your airflow. Available in two designs;
the Knobby (use one for every 200cc) and the Low-Boy (use
one for every 300cc). Arctic, Ski-Doo and Polaris air boxes
easily allow for both valves, while the Yamaha air boxes
accept the Knobby valves only. Re-jetting may be required.
TPI Air Box Fittings are made from billet aluminum
and brass. The new fittings replace the original,
cheap plastic fittings that are always breaking. The
new fittings also have an equalizer line to connect
the fittings. This equalizes the pressure to each carburetor for a smoother running machine.
06-145…..Polaris Air Box Twin Kit........................................................$19.95
06-147…..Polaris Air Box Triple Kit ......................................................$29.95
06-831…..Knobby TPI Valve, Black, Single per 200cc ........................$19.95
06-832…..Low-Boy TPI Valve, Black, Single per 300cc ......................$19.95
43
FUEL SYSTEMS
The SLP Boost Bottle helps correct
reed valve pressure imbalance to
improve low to midrange drivability,
throttle response, fuel economy and horsepower. A must for
stock or modified twins. Plastic construction.
Clutching
Order Line 800-883-0294
Clutching
Polaris Drive Service Parts
Spacers
07-712…..Spacer, OEM 5210752, .020”, 1.350” ID x 1.750” OD ..........$1.00
07-713…..Spacer, OEM 5242981, .025”, 1.350” ID x 1.750” OD ..........$2.35
07-714…..Spacer, OEM 5210753, .032”, 1.350” ID x 1.750” OD ..........$1.45
07-716…..Spacer, OEM 5210754, .050”, 1.350” ID x 1.750” OD ..........$1.95
07-736…..Engagement Spacers, OEM 5430790, .080” (plastic), ea. ....$4.65
07-738…..Engagement Spacers, OEM 5430788, .170” (plastic), ea. ....$4.95
Cover Plate
07-720…..DU Bushing, Cover, 1989-97, OEM 3576510........................$6.65
07-721…..Garmax Bushing, Cover, 1998 on, OEM 3576516,
1/2” long................................................................................$12.75
07-719…..Garmax Bushing, Cover, Heavy Duty Clutch, 7/8” Length ..$19.75
07-724…..Retaining Ring Cover Bushing, OEM 7710417 ....................$1.25
Moveable Sheave
07-730…..Sleeve Bearing, OEM 3576502, (moveable sheave) ..........$16.60
07-732…..Retaining Insert Moveable Bushing, OEM 5010188 ............$5.25
07-734A…Weight Pin Kit (Includes 3 pins & nuts), OEM 2200219......$18.50
07-726A…Weight Pin Nut, OEM 7541906, 3 pc. ..................................$1.75
07-728A....Weight Pin Bolt, OEM 7515105, 3 pc. ................................$17.25
Polaris Primary Drive
Clutches
All genuine Polaris P-85 Clutches have
the open-face design to allow for better
cooling of the sheaves and longer belt
life. It has always been a goal for manufacturers to build a
clutch as good as this one. All clutches come standard with
machined sheaves and captivated towers. Clutches noted
“Heel Clicker” are machined to accept Heel Clicker weights.
Weights and springs are sold separately.
Old Style Polaris
07-695.....Polaris Drive Clutch, Old Style Long Fuji Taper ................$439.95
07-700.....Polaris Drive Clutch, Cast Spider, Narrow Roller ..............$418.95
Newer Polaris (1:10 Taper)
07-707….Polaris Heel Clicker Drive Clutch, Semi Forged Spider,
3/4” puller............................................................................$348.95
32mm Polaris (1:10 Taper)
07-699.....Polaris Drive Clutch, 2007 600 Cleanfire & 2008-Present
600 & 700 ..........................................................................$446.95
Ski-Doo Taper
07-704.....Polaris Heel Clicker Drive Clutch, Semi Forged Spider,
1:7.5 Ski-Doo ......................................................................$435.95
Ring Gear Style (1:10 Taper)
07-698.....Polaris Drive Clutch, Cast Spider ......................................$441.95
07-697.....Polaris Ring Gear Bolts, 6 pc. ................................................$8.50
07-696.....Polaris Ring Gear ................................................................$64.95
Spider
07-710......Jam Nut, OEM 5020425, ea. ..............................................$13.95
07-750......Roller Pin, OEM 5020422......................................................$2.05
07-756A....Roller & Bushing Assembly (narrow), OEM 1321457,
3 pc, .360” ..........................................................................$49.95
07-758A....Roller & Bushing Assembly (wide), OEM 1321622, 3 pc. ..$77.95
07-752A....Guide Button, OEM 5430445, 6 pc.....................................$26.95
07-754A....Multi-lube Washer, OEM 5430945, 6 pc. ..............................$3.25
07-760......Button Shim Kit, OEM 2200387 ............................................$8.45
Replacement Weight Bushings/ Tool
07-590.....Replacement Bushings, 3 pc. ..........................$20.60
07-592.....Clutch Weight Bushing Tool ................................$6.95
Max Clips for Polaris
Clutches
Polaris Heavy Duty Clutch
This Polaris engineered drive clutch is
designed to meet the need of today's high
horsepower engines. The heavy duty drive
clutch offers a semi-solid forged spider,
which is 20 percent stronger than cast. A
wider, more durable bushing and a spring retainer help to
improve spring life.
The “Max” clip is specifically designed to
fit behind the heel of the clutch ramp in the newer style
Polaris Drive Clutch. ('93 and newer) It allows the use of racing style weights without changing shims in the spider thus
allowing smoother engagement. Sold as a set of three.
07-706.....Max Clip for Polaris Clutches, (set of 3) ..............................$15.25
07-705…..Polaris Heavy Duty Drive Clutch........................................$465.50
Arctic Primary Drive
Clutch
Clutch Rebuild Kit
Includes 6 Buttons, 12 Button Shims, 3
Rollers, 3 Roller Pins, 9 Multilube
Washers and 3 Weight Pins. Wide
roller is .540” wide while narrow roller is .360” wide.
07-780…..Clutch Rebuild Kit, Narrow, OEM 2200386 ........................$97.95
07-781…..Clutch Rebuild Kit, Wide, OEM 2201169 ..........................$109.95
07-782…..Clutch Rebuild Kit, Heavy Duty Drive Clutch, '04 & '05 XC800
(1 1/8'' Pin & .182'' Button) ................................................$138.95
Available in the standard diameter and
also a large 8 3/8” OD Bearcat version.
The nine towers make for an extremely
strong clutch by eliminating sheave distortion and tower flex. Great for Drag Racing applications. The
six tower is an efficient lightweight clutch great for Race
applications. Clutches do not include spring or weights.
Roller Kit
Bearcat 30mm, 1:10 Taper (Large 8 3/8” OD)
07-596.....Arctic Bearcat Primary Clutch ............................................$495.00
Replacement roller kit for Polaris narrow and wide roller clutches. Kit
includes 3 Pins, 3 Rollers, 6 Buttons
and 6 Washers.
30mm, 1:10 Taper (Standard 8” OD)
07-594…..Arctic Primary Clutch, 9-Tower ..........................................$430.00
07-595.....Arctic Primary Clutch, 6-Post, 30mm (Race assembly) ....$415.00
CLUTCHING
............................................................................................
33mm, 1:10 Taper (ZR900)
07-597.....Arctic Primary Clutch, 6-Post, 33mm ................................$495.00
07-768A.....Roller Kit, Narrow .360” ....................................................$82.45
07-769A.....Roller Kit, Wide .540” ........................................................$98.95
44
Clutching
Order Line 800-883-0294
Quick Change
Racing Clutch
108 4-PRO Clutch
Comet's super clutch. Utilizing four
clutch weights rather than three greatly enhances tune ability. Arms can be
used in sets of two allowing you to
zero in on the amount of weight
desired. Along with captivated towers,
the shouldered cover bolts virtually
eliminate tower spreading. To calculate weight needed, add
14% to the weight used in a 3 ramp clutch, multiply by 3 then
divide by 4 to find recommended weight. Supplied with
weight pins, mounting bolt and washer.
Without arms and spring.
Available in Comet 102C, 108EXP and
Polaris P-85. Features a turning dial on
the outside of the clutch, which raises and
lowers engagement. The spider is splined
to allow easy removal for changing shims to maintain belt to
sheave clearance. For use with 1 1/4” to 1 7/16” drive belts.
Includes weight pins and spacer shims. A longer clutch bolt
may be necessary.
Comet Q/C
07-001…..Comet 102 Q/C, 30mm 1:10 Taper....................................$495.00
07-002…..Comet 102 Q/C, 33mm 1:7.5 Taper, Ski-Doo ....................$495.00
07-003…..Comet 108 Q/C, 30mm 1:10 Taper....................................$495.00
07-004…..Comet 108 Q/C, 33mm 1:7.5 Taper, Ski-Doo ....................$495.00
Polaris Q/C
07-005…..Polaris Heel Clicker Q/C, 30mm 1:10 Taper......................$545.00
07-011…..Polaris Heel Clicker Q/C, 33mm 1:7.5 Ski-Doo Taper ......$575.00
Pullers
07-290…..Comet 102 Q/C Clutch Puller, 3/4” Thread..........................$34.95
07-291…..Comet 108 Q/C Clutch Puller, 5/8” Thread..........................$34.95
07-038…..Polaris Q/C Clutch Puller (for Arctic/Ski-Doo Engine) ........$34.95
07-039…..Polaris Q/C Clutch Puller (for Polaris Engine) ....................$34.95
Components
07-006…..Spacer Shims, 5pcs. ............................................................$20.65
07-008…..Adjusting Nut........................................................................$17.50
07-007…..Threaded Sleeve, Adjusting Nut, 2 13/16” Long..................$20.00
07-009…..Threaded Sleeve, Adjusting Nut, 3 1/8” Long, Std. ............$20.00
07-0092....Guide Washer, ½” bolt (for .750” ID threaded sleeve) ..........$8.00
07-0094....Guide Washer, 14mm bolt (for .750” ID threaded sleeve) ..$8.00
07-040…..108 4-PRO, 30mm 1:10, OEM 217600 ............................$415.95
07-042…..108 4-PRO (early Ski-Doo's), 30mm 1:10,
OEM 217604 ......................................................................$415.95
07-044…..108 4-PRO (new Yamaha), 30mm 1:10,
OEM 217605 ......................................................................$415.95
07-046…..108 4-PRO (new Ski-Doo's), 33mm 1:7.5,
OEM 217607 ......................................................................$415.95
Comet Clutch Bushing Kits
Cover Bushing, 102C
Fits: Cover Plate 102C
07-120…..Includes one bushing and two special
retaining rings. (Covers with staked in bushings
require complete cover) OEM 211286 ........$27.95
102-C Clutch
Moveable Bushing, 102C
Fits: Pre '86, 102C Moveable Sheave
07-122…..Includes bushing with snap ring.
1 5/8” ID x 2 1/16” OD x 3/4” Long. OEM 204280 ..............$40.80
102-C Clutch, 30mm 1:10 tapered bore;
accepts 1 1/4” belts and is adjustable for
wider belts. Will accommodate Comet,
Polaris and Arctic weights and springs.
Supplied with weight pins, mounting bolt
and washers. Comes without arms and spring.
Moveable Bushing, 102C, 108 EXP & 4-Pro
07-124.....Moveable Bushing, 102/108C and Pre ‘97
108EXP, 1 5/8” ID x 1 7/8” OD x 3/4” Long
(fiber), OEM 213265 ............................................................$24.95
07-125.....Moveable Bushing w/ Snap Ring,
108EXP and 4-Pro (split bushing), OEM 217459A ..............$33.25
07-010…..102-C Clutch, OEM 212600 ..............................................$305.00
Cover Bushing 108 EXP/ 108 4-Pro
07-121.....Bushing, Cover Plate,108 EXP/
108 4-Pro........................................................$16.50
108 EXP Clutch
Bushing Insert Kit, Cam Arm:
07-128…..Includes three bushings. 253” ID x .315”
OD x .45” Long. OEM 208342 ..................................$20.85
A higher performance clutch suited for today's high-powered
machines. It accepts 1 3/8” belts but can be adjusted to other
widths. A new moveable sheave bushing with higher heat
and wear resistance extends clutch performance. Supplied
with weight pins, mounting bolts and washers. Comes without
arms and spring.
Cover Plates
& Bolts
07-022.....108 EXP (Polaris long shaft), 30mm 1:10,
OEM 217502 ......................................................................$309.95
07-024.....108 EXP (new Ski-Doo taper), 33mm 1:7.5,
OEM 217507 ......................................................................$309.95
07-028.....108 EXP Clutch, 30mm 1:10, OEM 217504 ......................$309.95
Comet replacement cover
plates and cover plate bolt kits.
45
CLUTCHING
Cover Plates
07-180.....Cover Plate with Bushing, OEM 207120, 102C ..................$49.35
07-184.....Cover Plate with Bushing, OEM 215300, 108 EXP ............$38.90
07-186.....Cover Plate with Bushing, OEM 217174, 108 4-PRO..........$55.70
Bolt kits
07-188.....Cover Bolts (6 bolts & lock washers), 102C,
OEM 207296 ..........................................................................$5.60
07-189.....Cover Bolts (8 bolts), 108 EXP & 108 4-PRO,
OEM 217099 ........................................................................$21.95
Clutching
Order Line 800-883-0294
Fixed Sheave with Stem
Comet Pivot Bolts
& Lock Nuts
Comes with mounting bolt and washer.
102/108C
102C
07-200…..Fixed Sheave w/ Stem, 102C
(for Clutch 212600), OEM 216733, 30mm ........................$124.95
108 EXP
07-204.....Fixed Sheave w/ Stem, 108 EXP (for Clutch
#217503/219503A), OEM 217097/219337C, 30mm ..........$133.80
07-206.....Fixed Sheave w/ Stem, 108 EXP (for Clutch #217504A),
OEM 217108 ......................................................................$117.80
07-208.....Fixed Sheave w/ Stem, 108 EXP (for Clutch #217505),
OEM 217110 ......................................................................$112.20
07-210.....Fixed Sheave w/ Stem, 108 EXP (for Clutch
#217507/219507A),OEM 217114/219342C, 1:7.5 Ski-Doo$133.80
Pivot Bolt Kit
07-160…..Includes three 4” x 2 1/4” Bolts w/ Lock Nuts and six Cam
Arm Thrust Washers. OEM 207869, Fits: 102/108C ..........$16.95.
Pivot Bolt Lock Nut Kit
07-166…..Includes three 1/4” Lock Nuts. OEM 207953,
Fits: 102/108C ......................................................................$5.95.
108 EXP
Pivot Bolt Kit
07-162…..Includes three 5/16” x 2 5/8” Bolts with Lock Nuts and
six Cam Arm Thrust Washers. OEM 215311,
Fits: '94 108 EXP. ................................................................$29.95
Pivot Bolt Kit
07-164…..Includes three 1/4” x 2 5/8” Bolts with Lock Nuts and six
Cam Arm Thrust Washers. OEM 216349,
Fits: 108 EXP. ......................................................................$27.50
Pivot Bolt Lock Nut Kit
07-168…..Includes three 1/4” Nyloc Lock Nuts. OEM 212670,
Fits: '94 108 EXP. ..................................................................$3.45
07-170…..Includes three 3/16” Lock Nuts. OEM 209675,
Fits: 108 EXP. ........................................................................$4.90
108 4-Pro
07-212.....Fixed Sheave w/ Stem, 108 4-Pro (for Clutch
#217600/219600A), OEM 217164/219322C, 30mm ........$157.90
07-214.....Fixed Sheave w/ Stem, 108 4-Pro (for Clutch #217604A),
OEM 217180 ......................................................................$157.90
07-216.....Fixed Sheave w/ Stem, 108 4-Pro (for Clutch #217605A),
OEM 217182 ......................................................................$157.90
108 4-PRO
Comet Moveable Sheaves
Pivot Bolt Kit
07-172…..Includes four 1/4” x 2 3/8” Shouldered Bolts with Lock
Nuts & Plastic Cam Arm Thrust Washers.
OEM 217178, Fits: 108 4-PRO. ..........................................$28.95
Shims
07-250....Spring Shim (3pcs.), OEM 203849..........................................$9.60
07-252....Belt Spacer Shim (1pc.), 102C, OEM 207398 ........................$6.80
07-256....Belt Spacer Shim (2pcs.), 108C & 108 EXP, OEM 214393 ....$9.60
07-258....Spider Spacer (2pcs.), 102C, OEM 203150 ............................$9.40
07-260....Spider Spacer (2pcs.), 108C & 108 EXP, OEM 216350........$15.60
Includes Bushing and Cover Bolts.
07-190…..Moveable Sheave, 102C, OEM 208805 ............................$124.95
07-196…..Moveable Sheave, 108 EXP, OEM 216354 ......................$132.00
07-198…..Moveable Sheave, 108 4-PRO, OEM 217167 ..................$128.25
Spider Assemblies
Mounting Bolts
Replacement Comet Spider assemblies include
the Roller Kit with buttons.
Machine Hardened steel bolts. OEM
numbers included where applicable.
The flanged bolts are denoted separately from the standard head profile.
07-150....Spider Assembly, OEM 214917, 102C ..................................$96.85
07-154....Spider Assembly, OEM 215315, 108 EXP ..........................$179.50
07-156....Spider Assembly, OEM 217170, 108 4-PRO ......................$166.20
Flanged - 7/16”-20
07-220.....Mounting Bolt, 7/16”-20 x 5 1/2”, Flanged, OEM 217119 ....$31.30
07-222.....Mounting Bolt, 7/16”-20 x 6 1/2", Flanged, OEM 217160 ..$35.10
Flanged 1/2"-20
07-228.....Mounting Bolt, 1/2”-20 x 6 1/2”, Flanged, OEM 217117 ......$29.40
07-230.....Mounting Bolt, 1/2”-20 x 6 3/4", Flanged, OEM 217158 ......$29.40
Standard 7/16”-20
07-224.....Mounting Bolt, 7/16”-20 x 6 1/4", OEM 216018 ..................$28.45
Standard 1/2"-20
07-226.....Mounting Bolt, 1/2”-20 x 6 1/2", OEM 207654 ....................$14.20
07-232.....Mounting Bolt, 1/2”-20 x 7”, OEM 208794............................$12.95
07-234.....Mounting Bolt, 1/2”-20 x 7 1/4", OEM 215784 ....................$25.60
07-231.....Mounting Bolt, 1/2''-20 x 7 1/2'', Grade 8 ZP, ea. ................$12.95
Standard 14mm-1.5
07-236.....Mounting Bolt, (6.3”), 14mm-1.5 x 160mm, OEM 216083 ..$31.60
07-235.....Mounting Bolt, 14mm-1.5 x 6 1/2” ........................................$19.95
07-233.....Mounting Bolt, 14mm-1.5 x 6 3/4" ........................................$19.95
07-237.....Mounting Bolt, 14mm-1.5 x 7'’ ..............................................$19.95
07-239.....Mounting Bolt, 14mm-1.5 x 7 1/2" ........................................$19.95
07-219.....Mounting Bolt, 14mm-1.5 x 8 1/2'', Polaris '99 - Current
Domestic, OEM 7517501 ....................................................$23.25
Roller Kits
Spider Roller Kit 102C/108C
CLUTCHING
Without Shouldered Roller
07-100…..Includes 3 rollers, 3 roller pins,
6 buttons & 6 thrust washers.
OEM 207756.Fits: 88 & Older,102C/108C. ..........................$55.95
With Shouldered Roller
07-102…..Includes 3 rollers, 3 roller pins, 6 buttons & 6 thrust washers.
OEM 214920.Fits: 89 & Newer, 102C/108C. ......................$66.95
Spider Roller Kit, 108 EXP
07-104.....Includes 3 rollers, 3 roller pins, 6 buttons & 6 thrust washers.
OEM 215271. Fits: 108 EXP. ............................................$107.30
07-106.....Rollers w/ Bushing Insert, 108 EXP (3 pc.), OEM 215295 ..$59.95
Spider Roller Kit, 108 4-PRO
07-108…..Includes 4 rollers, 4 roller pins, 8 buttons & 8 thrust washers.
OEM 217186. Fits: 108 4-PRO. ..........................................$88.95
Guide Buttons
07-140…..Guide Button (Contoured 102/108C),
OEM 205432, 6pcs..............................................................$16.95
07-142…..Guide Button (Flat 108 EXP), OEM 215111, 6 pcs ............$30.35
46
Clutching
Order Line 800-883-0294
Guide Washers for
Mounting Bolts
Polaris Weights
OEM weights from Polaris offered in
either bushed or non-bushed styles. Full
weights have a more consistent profile
that causes the tip of the weight to be heavier making the
weight more aggressive and thus pull harder through its
cycle. Mod weights have a lighter tip which allows them to
pull harder on the start while maintaining peak RPM. Sold
individually. Non-Bushed weights do not have a pivot bolt
bushing.
Flanged and non-flanged mounting bolt
washers.
Non Flanged
07-240.....102/108C & 108 EXP 7/16”, OEM 211255 ............................$8.10
07-242.....102/108C & 108 EXP 1/2”, OEM 202996 ..........................$12.10
07-243.....108 EXP & 108 4-Pro 14mm, OEM 218116 ........................$10.80
07-249.....'99 to Present Polaris Domestic 14mm, OEM 5132441 ........$8.50
Flanged
07-244.....108 EXP & 108 4-PRO 7/16”, OEM 217118 ........................$15.90
07-246.....108 EXP & 108 4-PRO 1/2”, OEM 217116 ..........................$14.70
07-248.....108 EXP & 108 4-PRO 14mm, OEM 217122 ................$18.30
Belt Clearance Quick
Adjuster
This simple device enables you to adjust
your belt to sheave clearance by simply
loosening a locking screw and turning an aluminum dial. A
longer clutch bolt may be required in some cases. In some
108 EXP and 108 4-Pro Comet applications, the thread
should be measured to insure a proper fit. This screws into
existing puller threads.
07-013.....Belt
07-015.....Belt
07-014.....Belt
07-016.....Belt
07-017.....Belt
Clearance Adj.,
Clearance Adj.,
Clearance Adj.,
Clearance Adj.,
Clearance Adj.,
3/4” Thread,
3/4” Thread,
3/4” Thread,
3/4” Thread,
3/4” Thread,
Comet, 14mm Bolt ..........$59.95
Polaris, 14mm Bolt..........$59.95
Comet, ½” Bolt ................$59.95
Polaris, 1/2” Bolt..............$59.95
Comet 4-Pro, 1/2” Bolt ....$59.95
Polaris 11-Series Weights
Because of their unique profile, these
weights pull much harder on the start
and through the midrange. All weights
are machined from solid steel except the
07-436 which is a molded part like standard Polaris weights.
We recommend using a weight that is one to two grams
heavier than your existing weights. They are sold individually
and are bushed.
Weights, Z/Full, 29g, OEM 5630151........................$19.75
Weights, T-1/Full, 32.5g, OEM 5630148..................$14.95
Weights, L-1/Full, 34g, OEM 5630145 ....................$18.95
Weights, R-1/Full, 36g, OEM 5630147 ....................$18.95
Weights, Q-1/Full, 38g, OEM 5630146....................$18.95
Weights, K-1/Full, 40g, OEM 5630144 ....................$18.95
Weights, P/Full, 43g, OEM 5630089 ......................$18.95
Weights, J-1/Full, 44g, OEM 5630065 ....................$18.95
Weights, M/Mod, 46g, OEM 5630301......................$19.75
Weights, M/Full, 47g, OEM 5630068 ......................$19.75
Weights, 02/Full/Notched, 48.5g, OEM 5630225 ....$11.65
Weights, H/Full, 50.5g, OEM 5630064 ....................$19.75
Weights, 06/Mod, 51g, OEM 5630243 ....................$19.75
Bushed
07-560…..Polaris
07-561…..Polaris
07-562…..Polaris
07-563…..Polaris
07-559…..Polaris
07-564…..Polaris
07-565…..Polaris
07-566…..Polaris
07-567…..Polaris
07-568…..Polaris
07-569…..Polaris
07-570…..Polaris
07-572…..Polaris
07-573…..Polaris
07-571…..Polaris
07-574…..Polaris
07-575…..Polaris
07-576…..Polaris
07-577…..Polaris
07-578…..Polaris
07-580…..Polaris
07-581…..Polaris
07-582…..Polaris
07-583…..Polaris
07-584…..Polaris
07-585…..Polaris
07-586…..Polaris
07-587…..Polaris
07-588…..Polaris
07-589…..Polaris
07-591…..Polaris
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
10MR/Mod, 42.5g, OEM 1321530 ............$20.60
S43H/Full, 43.5g, OEM 1321849..............$20.60
10MW/Mod, 45g, OEM 1321527 ..............$20.60
S45H, Full, 45.5g, OEM1321850..............$20.60
S47H/Full, 47.5, OEM 1321851................$20.60
10MB/Mod, 47.5g, OEM 1321529 ............$20.60
S49H, Full, 49g, OEM 1321730................$31.95
10M/10M5/Mod, 49.5g, OEM 1321528 ....$20.60
S51H, Full, 51g, OEM 1321731................$20.60
10/Mod, 51.5g, OEM 1321526..................$20.60
S53H, Full, 53g, OEM 1321759................$20.60
10AL/Mod, 53g, OEM 1321531 ................$20.60
10-A/Mod, 53.5g, OEM 1321589 ..............$19.75
10-54/Mod, 54g, OEM 1321685 ..............$20.60
S55H, Full, 55g, OEM 1322004................$20.60
10-56/Mod, 56g, OEM 1321684 ..............$20.60
S57H, Full, 57g, OEM 1322005................$18.95
10-58/Mod, 58g, OEM 1321588 ..............$20.60
S59H, Full, 59g, OEM 1322013 ..............$20.60
10-60/Mod, 60g, OEM 1321587 ..............$20.60
10-62/Mod, 62.5g, OEM 1321586 ............$20.60
10-62M/Mod, 62g, OEM 1321614 ............$19.75
10-64, 63.5g, OEM 1321585 ....................$20.60
10-64M/Mod, 63.5g, OEM 1321615 ........$19.75
10-66/Mod, 66.5g, OEM 1321584 ............$20.60
10-68, 68 g, OEM 1322427 ......................$20.60
10-70, 70 g, OEM 1322414 ......................$20.60
10-72, 72 g, OEM 1322428 ......................$20.60
10-74, 74 g, OEM 1322429 ......................$20.60
10-76, 76 g, OEM 1322585 ......................$19.75
10-78, 78 g, OEM 1322586 ......................$19.75
Replacement Weight
Bushings
Replacement bushings and the punch tool to
remove and insert properly.
Ramp Grinding Block
Grind your weights on a Ramp Grinding Block. Holds three of any
Comet, Polaris, Arctic or other weight at once so that they may be
ground evenly.
07-590.....Replacement Bushings, 3pc.................................................$20.60
07-592.....Clutch Weight Bushing Tool....................................................$6.95
07-286…..Ramp Grinding Block ..........................................................$23.95
47
CLUTCHING
07-430…..11-Series, 38 g. Polaris Weight, ea., OEM 1322594 ..........$31.95
07-431…..11-Series, 40 g. Polaris Weight, ea., OEM 1322593 ..........$31.95
07-432…..11-Series, 42 g. Polaris Weight, ea., OEM 1322592 ..........$31.95
07-433…..11-Series, 44 g. Polaris Weight, ea., OEM 1322591 ..........$31.95
07-434…..11-Series, 46 g. Polaris Weight, ea., OEM 1322596 ..........$20.65
07-435…..11-Series, 48 g. Polaris Weight, ea., OEM 1322590 ..........$20.65
07-445…..11-Series, 50 g. Polaris Weight, ea., OEM 1322613
(machined)............................................................................$31.95
07-436…..11-Series, 50 g. Polaris Weight, ea., OEM 1322589
(molded)................................................................................$31.95
07-437…..11-Series, 52 g. Polaris Weight, ea., OEM 1322595 ..........$31.95
07-438…..11-Series, 64 g. Polaris Weight, ea., OEM 1322604 ..........$31.95
07-439…..11-Series, 66 g. Polaris Weight, ea., OEM 1322559 ..........$31.95
07-440…..11-Series, 68 g. Polaris Weight, ea., OEM 1322558 ..........$31.95
07-441…..11-Series, 70 g. Polaris Weight, ea., OEM 1322523 ..........$31.95
07-442…..11-Series, 72 g. Polaris Weight, ea., OEM 1322524 ..........$31.95
07-443…..11-Series, 74 g. Polaris Weight, ea., OEM 1322525 ..........$31.95
07-444…..11-Series, 76 g. Polaris Weight, ea., OEM 1322526 ..........$31.95
Non-Bushed
07-502…..Polaris
07-504…..Polaris
07-506…..Polaris
07-508…..Polaris
07-510…..Polaris
07-512…..Polaris
07-514…..Polaris
07-518…..Polaris
07-522…..Polaris
07-526…..Polaris
07-530…..Polaris
07-536…..Polaris
07-538…..Polaris
Clutching
Order Line 800-883-0294
Comet Weights
Lightning Clutch
Weights
Sold individually, these weights come with bushings.
30 grams & up
07-451…..Comet Weights, A-37 Full, 37.0g, OEM 217285 ................$17.50
07-452…..Comet Weights, A-39 Full, 39.0g, OEM 217288..................$17.50
07-453…..Comet Weights, A-27 Notched, 39.7g, OEM 216091 ..........$20.10
40 grams & up
07-454…..Comet Weights, A-14 Mod, 40.3g, OEM 214172 ................$17.50
07-455…..Comet Weights, AB-1 Mod/Notched, 40.5g,
OEM 208455 ........................................................................$18.95
07-457…..Comet Weights, A-10 Mod, 41.3g, OEM 213371 ................$18.20
07-458…..Comet Weights, A-7 Mod, 42.5g, OEM 212822 ..................$17.50
07-460…..Comet Weights, AA-2 Mod, 43.0g, OEM 208395 ................$14.60
07-461…..Comet Weights, A-6 Mod, 43.6g, OEM 212821 ..................$17.20
07-462…..Comet Weights, A-8 Full, 44.0g, OEM 212820....................$17.50
07-464…..Comet Weights, AA-1 Mod, 44.0g, OEM 208394 ................$16.05
07-465…..Comet Weights, A-3 Full, 45.0g, OEM 208268....................$12.90
07-466…..Comet Weights, A-9 Full, 45.3g, OEM 213370....................$18.20
07-468…..Comet Weights, A-12 Mod, 46.1g, OEM 213864 ................$18.20
07-469…..Comet Weights, A-19 Mod, 46.2g, OEM 215407 ................$15.60
07-470…..Comet Weights, A-5 Full, 46.5g, OEM 212639....................$17.50
07-471…..Comet Weights, A-17 Mod, 46.5g, OEM 215149 ................$15.60
07-472…..Comet Weights, A-28 Mod/Notched, 46.5g,
OEM 216381 ......................................................................$18.70
07-473…..Comet Weights, A-22 Mod/Notched, 46.9g,
OEM 215867 ........................................................................$17.50
07-474…..Comet Weights, A-1 Full, 47.3g, OEM 209940....................$18.20
07-475…..Comet Weights, A-4 Full, 47.5g, OEM 212135....................$20.10
07-476…..Comet Weights, AB-2 Full, 47.7g, OEM 208457 ................$12.90
07-477…..Comet Weights, A-2 Full, 48.0g, OEM 208221....................$12.90
07-478…..Comet Weights, A-1 Full, 49.0g, OEM 207689 ..................$15.60
07-479…..Comet Weights, A-11 Full, 49.0g, OEM 213400 ..................$16.50
07-480…..Comet Weights, A-20 Full, 49.2g, OEM 215575..................$15.60
07-481…..Comet Weights, A-52 Notched, 49.5g, OEM 216087 ..........$17.50
The custom-built shift weights for
Polaris and Comet clutches are back again. These weights
are tunable by drilling out the four 1/16” pre-drilled holes for
your desired RPM, or shift rate. Weights are fully machined
from alloy steel, bushed and hardened for better performance
and durability. Has an aggressive shift profile and heavy tail
for the best performance. (Sold as a set of three.)
07-402... ..Lightning
07-403... ..Lightning
07-404... ..Lightning
07-405... ..Lightning
07-4051... Lightning
07-406... ..Lightning
07-4061... Lightning
07-407... ..Lightning
07-4071... Lightning
07-408... ..Lightning
07-409... ..Lightning
07-410... ..Lightning
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
Weights,
40 gram ................................................$89.95
45 gram ................................................$89.95
50 gram ................................................$89.95
55 gram ................................................$89.95
57.5 gram..............................................$89.95
60 gram ................................................$89.95
62.5 gram..............................................$89.95
65 gram ................................................$89.95
67.5 gram..............................................$89.95
70 gram ................................................$89.95
72 gram ................................................$89.95
75 gram ................................................$89.95
Arctic Weights
OEM non-pinned Arctic weights. Sold
individually.
07-939…..Arctic
07-940…..Arctic
07-941…..Arctic
07-942…..Arctic
07-943…..Arctic
07-944…..Arctic
07-945…..Arctic
07-946…..Arctic
07-947…..Arctic
07-948…..Arctic
07-949…..Arctic
07-950…..Arctic
07-951…..Arctic
07-952…..Arctic
07-953…..Arctic
07-954…..Arctic
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Cat
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
Weight,
48.5 gram OEM 0746-524 ....................$17.65
50 gram, OEM 0746-587 ......................$21.25
50.5 gram, OEM 0746-642 ....................$17.65
53 gram, OEM 0746-539 ......................$17.65
54.5 gram, OEM 0746-588 ....................$21.25
55.5 gram, OEM 0746-559 ....................$21.25
56.5 gram, OEM 0746-655 ....................$21.25
58 gram, OEM 0746-635 ......................$17.65
60 gram, OEM 0746-617 ......................$21.25
62 gram, OEM 0746-615 ......................$17.65
63.5 gram, OEM 0746-653 ....................$21.25
64 gram, OEM 0746-614 ......................$17.65
66 gram, OEM 0746-616 ......................$17.65
68 gram, OEM 0746-633 ......................$21.25
70.5 gram, OEM 0746-634 ....................$17.65
71.5 gram, OEM 0746-640 ....................$17.65
50 grams & up
07-483…..Comet
07-485…..Comet
07-486…..Comet
07-487…..Comet
07-488…..Comet
07-489…..Comet
07-490…..Comet
07-491…..Comet
Thunder Shift Kit
Designed specifically to harness the
horsepower of today's big engines,
their unique heavy heel design and
weight profile provides greater shift force and improved acceleration. Adjustable by adding rivet weights (up to 6 grams per
weight). To order, add 4 grams to the amount of weight you
are currently using to choose the correct SLP MTX Weight.
The Thunder Shift Kit is a set of
weights that has three carefully placed
threaded holes in the arms which
allow you to add or subtract weight to
the arm at each of these holes in 0.3 gram increments. One
set of weights will give you unlimited combinations to arrive
at exact tuning. You can create weights from 39 to 65 grams.
Each set of weights is perfectly matched to the tenth of a
gram. Includes all necessary fasteners, which are made from
machined billet stock with aircraft type locking patches on
every fastener.
Weight Sets
07-380.....MTX 62 gram clutch weights, set of (3) ..............................$99.95
07-381.....MTX 65 gram clutch weights, set of (3) ..............................$99.95
07-382.....MTX 68 gram clutch weights, set of (3) ..............................$99.95
07-383.....MTX 71 gram clutch weights, set of (3) ..............................$99.95
07-384.....MTX 74 gram clutch weights, set of (3) ..............................$99.95
Replacement Tuning Rivets
07-386.....1 gram Aluminum Rivet, ea. ..................................................$1.66
07-387.....2 gram Steel Rivet, ea. ..........................................................$1.66
07-388.....3 gram Steel Rivet, ea. ..........................................................$1.66
Bushed
07-400…..Thunder Shift Kit, Bushed ....................................................$99.99
07-401…..Thunder Shift Kit, Bushed, Quad ......................................$129.99
07-379…..Thunder Shift Kit, Bushed, Yamaha ..................................$149.99
TRA Clutches
07-392…..Thunder Shift Kit, Ski-Doo, Light Roller Pins ......................$59.99
07-394…..Thunder Shift Kit, Ski-Doo, Steel Roller Pins ......................$59.99
Accessories
07-590…..Cam Arm Bushing Kit, set of 3 ............................................$20.60
07-397…..Heavy Metal Washers, 3.4g, set of 3 ..................................$26.99
SLP MTX Clutch
Weights
CLUTCHING
Weights, A-16 Mod, 50.0g, OEM 214898 ................$17.30
Weights, AC-1 Full, 52.3g, OEM 215242 ................$22.10
Weights, A-52 Full, 52.5g, OEM 214897..................$15.60
Weights, A-18 Full, 52.7g, OEM 215400..................$15.60
Weights, A-23 Notched, 53.5g, OEM 216061 ..........$17.50
Weights, A-54 Full, 54.3g, OEM 214651..................$15.60
Weights, AC-3 Mod/Notched, 54.3g, OEM 215922 $15.60
Weights, AC Full, 57.5g, OEM 215218 ....................$15.60
48
Clutching
Order Line 800-883-0294
Thunder Shift Arms
Heavy Hitters
The all new Thunder Shift Arms for
the Ski-Doo TRA clutch are machined
from aircraft grade billet aluminum.
The Thunder Shift Arms are five
times stronger than stock shift arms and are available in the
standard weight arm or the lightweight, which is 7 grams per
arm lighter than the standard. No grinding, drilling or tapping
and you still have the full use of the adjustments. Race legal.
The Heavy Hitters have undergone extensive field and dyno
testing to ensure excellent performance. An easy bolt on application that fits Comet 108 EXP's, Arctic Cat, Polaris and
Yamaha. Each set of weights come perfectly balanced with a
complete set of tuning components and a tuning manual.
Heavy Hitters are available in four base weight ranges. You
can add approximately 13 grams to each weight with the
supplied fasteners.
07-417…..Thunder Shift Arm Kit, Lightweight Set ..............................$289.99
07-418…..Thunder Shift Arm Kit, Standard Set..................................$289.99
Thunder Shift Rollers
Base Weight Kits
07-391.....Heavy Hitters, 50g base weight..........................................$229.99
07-393.....Heavy Hitters, 55g base weight..........................................$229.99
07-395.....Heavy Hitters, 60g base weight..........................................$229.99
07-398.....Heavy Hitters, 65g base weight..........................................$229.99
Yamaha
07-389.....Heavy Hitters, Yamaha Viper ............................................$249.99
07-378.....Heavy Hitters, Yamaha, RX-1/Warrior ................................$269.99
4-Pro/4-Weight clutches
07-385.....Heavy Hitters, Quad Cam, 50g base weight ......................$309.99
Accessories
07-397…..Heavy Metal Washers, 3.4g (Set of 3) ................................$26.99
Another great tuning product for the TRA clutch. These
rollers can be used with your stock arms or with the Thunder
Shift Arms. Thunder Shift Rollers are available in 1mm oversize or 2mm oversize.
07-419…..Thunder Shift Rollers, 1mm Oversize, (set of 3) ................$69.99
07-420…..Thunder Shift Rollers, 2mm Oversize, (set of 3) ................$69.99
Heel Clicker Clutch Kit
The Heel Clicker Clutch Kit is the
finest clutch kit available. This kit utilizes the “Dual Quadrant Flyweight”
technology. The Heel Clicker is also
the smoothest shifting system available. It simply applies all the power
your engine is making to the ground. To order your kit, first
weigh your existing clutch weight to find the Heel Clicker
nearest to that size. You will add an aluminum rivet and
washers to achieve that weight. The weight is adjusted externally by adding or removing setscrews in the heel. Springs
included with the kit are for use with your stock cover. Using
simple shop tools, the initial installation time for the clutch kit
is not even 30 minutes. Kit includes Heel Clicker clutch
weights, all applicable adjustment hardware, two clutch
springs and instructions.
Team Primary Springs
Team primary springs are manufactured of only the
best material to ensure proper rates. These
springs will work in Polaris, Arctic, Comet, Micro
Belmont and other drive clutches. They will not
work with Ski-Doo TRA's. $24.95 each.
Polaris/Arctic 3-weights
07-740…..Heel Clicker Clutch Kit, 3 Weights, 50g ............................$204.95
07-741…..Heel Clicker Clutch Kit, 3 Weights, 55g ............................$204.95
07-774…..Heel Clicker Clutch Kit, 3 Weights, 65g ............................$204.95
Polaris/Arctic 4-weights
07-744…..Heel Clicker Clutch Kit, 4 Weights, 45g ............................$249.95
07-745…..Heel Clicker Clutch Kit, 4 Weights, 50g ............................$249.95
Yamaha
07-778......Heel Clicker Clutch Kit, 3 Weights, 40g ............................$219.95
Threaded Insert Kit
07-751......Heel Clicker Threaded Insert Kit ........................................$12.95
Dalton’s Quick Adjust Cam Arms
QAP-1,
QAP-2,
QAP-3,
QAP-4,
Length
Force lbs.
Color
08-027
.207”
3.25”
100-275
Black
07-354
.207”
3.62”
130-290
Purple
08-025
.225”
3.52”
120-310
White
08-022
.207”
3.75”
150-310
Blue
08-023
.207”
4.29”
165-310
Orange
08-024
.218”
3.52”
140-320
Red
07-964
.207”
4.55”
180-320
Pink
07-961
.212”
4.00”
165-327
Almond
08-026
.207”
3.65”
140-330
Green
07-356
.218”
3.35”
120-340
Bright Yellow
07-357
.218”
3.63”
150-340
Bright Green
07-962
.218”
3.84”
165-344
Silver
07-963
.212”
4.19”
180-345
Gold
High engagment springs available from HPE and
Erlandson Performance. $19.95 each.
58-65.5g ............................$205.00
62-69.5g ............................$205.00
66-73.5g ............................$205.00
70-77.5g ............................$205.00
49
PN#
Wire Diameter
Length
Force lbs.
Color
07-376
.207”
4.08”
170-300
Orange/Black
07-377
.207”
4.50”
185-320
Maroon
07-371
.218”
4.30”
190-335
Gold
CLUTCHING
Weights,
Weights,
Weights,
Weights,
Wire Diameter
High Engagement Drive
Spring
Dalton’s patented Quick Adjust Cam
Arms are now available. This method
of adjustment allows you to add or
subrtract mass from the main body of
the flyweight without even removing
the weights from the drive clutch. Like
having many sets of flyweights in one kit. Sold as a set of 3.
07-412.....Quick Adjust
07-413.....Quick Adjust
07-414.....Quick Adjust
07-415.....Quick Adjust
PN#
Clutching
Order Line 800-883-0294
Polaris Drive Springs
SLP Drive Clutch Springs
Genuine Polaris Drive Springs work in almost all primary clutch applications except for Ski-Doo TRA's.
The tensions listed are at compression heights of
2 1/2” and 1 1/4".
For Arctic, Polaris, Comet and Micro Belmont
clutches manufactured, these springs are from the
highest quality Chrome-Silicon wire making them
very durable against sag and breakage. These
drive springs allow you to achieve your desired
engagement and the proper peak RPM.
$22.95 each.
PN#
Wire Diam.
Length
Force lbs.
Color
Price
07-370
.196”
3.37”
70-200
Orange
31.95
07-374
.200”
3.06”
70-210
Brown
31.95
07-372
.192”
3.59”
100-220
Red/White
32.95
PN#
Wire Diam.
Length
Force lbs.
Color
07-362
.218”
3.05”
75-240
Silver/Gold
31.95
07-050
.207”
3.55”
120-300
Black/Silver
07-368
.192”
4.00”
120-245
Red
31.95
07-054
.207”
3.82”
140-300
Blue/Silver
07-366
.207”
3.25”
100-275
Gold
31.95
07-057
.207”
4.24”
160-300
Green/Silver
07-373
.207”
4.00”
150-290
Almond/Gold
23.25
07-059
.207”
4.46”
170-300
Orange/Silver
07-358
.207”
3.55”
120-300
Blue
31.95
07-051
.207”
3.45”
120-310
Black/Yellow
07-355
.225”
3.52”
120-310
DarkBlue/White
31.95
07-055
.207”
3.73”
140-310
Blue/Yellow
07-350
.218”
3.75”
150-310
Almond/Blue
31.95
07-058
.207”
4.22”
160-310
Green/Yellow
07-349
.207”
4.29”
165-310
Almond/Red
31.95
07-052
.218”
3.37”
120-320
Black/Red
07-351
.200”
3.75”
165-310
Almond/Black
31.95
07-056
.218”
3.63”
140-320
Blue/Red
07-353
.218”
3.52”
140-320
Black/White
31.95
07-053
.218”
3.30”
120-340
Black/Pink
07-352
.218”
3.65”
140-330
Almond
31.95
07-060
.218”
3.48”
140-340
Blue/Pink
07-348
.218”
3.38”
120-340
Black/Green
31.95
07-061
.218”
3.75”
160-340
Green/Pink
Thunder Shift Drive Springs
Team Industry Drive Springs
For Ski-Doo
Premium drive springs from Thunder Products.
Team steel primary springs for the Ski-Doo TRA
clutches. Measured at 74mm and 42mm.
$24.95 each.
PN#
Make
Wire Diam.
Length
07-493
AC/Pol
.215”
3.88”
145-300 Red/White
22.95
07-494
AC/Pol
.220”
4.23”
165-310 Yellow/Pink
22.95
PN#
Wire Diam.
Length
Force lbs.
Color
7.50”
Yellow/White
23.95
08-028
.218”
4.80”
160-290
Yellow/Green
08-030
.207”
6.50”
200-290
Yellow/Red
08-031
.218”
5.80”
230-350
Yellow/Black
08-032
.234”
5.09”
230-380
Yellow/Orange
08-033
.225”
5.80”
250-380
Yellow/Silver
07-955
.225
4.10”
185-410
Yellow/Lime Gr.
07-956
.225
4.80”
240-340
Yellow/Lt. Blue
07-957
.225
5.00”
270-460
Yellow/Blk. Gr.
07-495
Ski Doo
.220”
Force lbs.
230-330
Color
Price
Comet Drive Springs
CLUTCHING
These are genuine Comet Springs. The tensions are checked when compressed to heights
of 2 3/8” and 1 1/8”.
Force lbs. Wire Diam.
PN#
Color
OEM
Length
Price
07-300
White
202467
80-160
.177
3.47”
22.80
07-302
Yellow
202551
100-185
.177
4.06”
16.60
07-304
Blue
07-306
Silver
202552
120-185
.177
4.87”
20.30
204818
85-190
.192
3.47”
18.90
07-308
Silver/Green
209935
100-195
.187
3.64”
18.70
07-310
Silver/Black
209696
85-205
.192
3.36”
14.60
07-314
Purple
207888
105-225
.192
3.47”
15.60
07-318
Red
207877
90-255
.207
3.25”
15.60
07-320
Purple
207758
135-255
.192
4.12”
15.60
07-322
Yellow/Red
208238
95-275
.207
2.91”
22.90
07-324
Silver/Orange
209936
100-285
.207
3.07”
15.60
07-326
Gold
208175
130-295
.207
3.50”
22.90
07-328
Yellow/Green
208228
135-300
.207
3.41”
15.60
Clutch Spring Tester
This tester is a must have for anyone doing
clutch tuning and performance work.
Composed of billet aluminum and has a
400 lb capacity in 5 lb graduation with 2%
accuracy. Designed to be used in a drill
press, vice or arbor press.
07-267.....Clutch Spring Tester, 400 lb. Capacity................................$139.95
50
Clutching
Order Line 800-883-0294
Polaris Driven Clutch
Polaris Helixes
Polaris Driven Clutches have features that
allow for adjustment of proper belt deflection. Order spring and helix separately. The
sheaves are factory machined. Have 1”
bore and 1/4” key.
Machined by Micro Belmont, most helixes
are billet and the ones labeled 'Cast' are
OEM Polaris.
Straight
07-870.....Straight
07-871.....Straight
07-872.....Straight
07-869.....Straight
07-873.....Straight
07-875.....Straight
07-876.....Straight
07-877.....Straight
07-880.....Straight
07-881.....Straight
07-882.....Straight
07-883.....Straight
07-884.....Straight
07-801.....Basic Driven Clutch ............................................................$289.95
Polaris Driven
Service Parts
Replacement components for Polaris
Secondary clutches.
Bushings & Snap Ring
07-810.....Large DU Driven Bushing, OEM 3569803 ..........................$17.45
07-812.....Large Fiber Driven Bushing, OEM 3569802 ........................$17.45
07-846.....Retaining Ring, OEM 7714804 ..............................................$5.50
Billet, 30
Billet, 32
Cast, 34
Billet, 34
Cast, 36
Cast, 38
Cast, 40
Billet, 42
Billet, 48
Billet, 50
Billet, 52
Billet, 54
Cast, 58
....................................................$74.95
....................................................$74.95
....................................................$89.95
....................................................$74.95
....................................................$89.95
....................................................$74.95
....................................................$74.95
....................................................$74.95
....................................................$74.95
....................................................$74.95
....................................................$74.95
....................................................$74.95
....................................................$74.95
Progressive
07-866.....Progressive Helixes, Billet, 44/30
07-890.....Progressive Helixes, Billet, 38/32
07-891.....Progressive Helixes, Billet, 50/32
07-887.....Progressive Helixes, Billet, 48/32
07-894.....Progressive Helixes, Billet, 42/34
07-893.....Progressive Helixes, Billet, 40/34
07-886.....Progressive Helixes, Billet, 45/34
07-896.....Progressive Helixes, Billet, 46/34
07-897.....Progressive Helixes, Billet, 48/34
07-888.....Progressive Helixes, Billet, 50/34
07-898.....Progressive Helixes, Billet, 40/36
07-899.....Progressive Helixes, Billet, 42/36
07-900.....Progressive Helixes, Billet, 44/36
07-903.....Progressive Helixes, Billet, 50/36
07-904.....Progressive Helixes, Billet, 42/38
07-905.....Progressive Helixes, Billet, 44/38
07-906.....Progressive Helixes, Billet, 46/38
07-907.....Progressive Helixes, Billet, 48/38
07-868.....Progressive Helixes, Billet, 44/39
07-908.....Progressive Helixes, Billet, 44/40
07-909.....Progressive Helixes, Billet, 46/40
07-911.....Progressive Helixes, Billet, 50/40
07-912.....Progressive Helixes, Billet, 46/42
07-913.....Progressive Helixes, Billet, 48/42
07-916.....Progressive Helixes, Billet, 48/44
07-917.....Progressive Helixes, Billet, 50/44
07-918.....Progressive Helixes, Billet, 52/44
07-919.....Progressive Helixes, Billet, 54/44
Ramp Buttons
07-814.....Ramp Button, OEM 5430466, 3pc. ........................................$6.75
07-816.....Friction Fighter Ramp Button, 3pc. ........................................$9.00
07-818.....Heavy Duty Ramp Button, 3pc. ............................................$23.00
Keys
07-848.....Key, Helix OEM 7721103........................................................$1.75
07-847.....Key, 1/4” square, 2 3/4” Long ................................................$2.90
07-849.....Key, 1/4” x 3/16” x 3” Long ....................................................$2.50
Windage Covers
Available in the vented design. This lowers converter temperature considerably.
07-840.....Cover Screw, OEM 7512048, 10 pc.......................................$8.95
07-843.....Driven Cap, Vented, OEM5243157 ......................................$11.60
07-845.....Flat Driven Plate, Vented, OEM 5243158 ..............................$8.10
Shim Washers
All belt deflection shim washers are 1 1/2” ID x 2 1/8” OD.
07-850…..Washer, .005”, ea.....................................................................$.95
07-852.....Washer, .010”, ea. ....................................................................$.95
07-854.....Washer, .015”, ea. ..................................................................$1.05
07-856.....Washer, .020”, ea. ..................................................................$1.15
07-858.....Washer, .025”, ea. ..................................................................$1.35
07-860.....Washer, .030”, ea. ..................................................................$1.35
07-862.....Washer, .060”, ea. ..................................................................$1.65
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
........................................$74.95
Genuine Polaris Helixes
Ramp Grinding Block
Polaris race engineered helixes are machined
with progressive shift angles for precision up
shift and a quick back shaft. All are machined
.060” deeper in the snap ring pocket to ensure
full shift out with 1 7/16” belts.
Grind your weights on a Ramp Grinding Block.
Holds three of any Comet, Polaris, Arctic or other
weight at once so that they may be ground evenly.
Clutch Alignment
Washers
A perfect fit for all Driven clutches where alignment is a must.
All have 1” ID and 1 1/4” OD.
51
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
Helix,
40-32, R1........................................................$91.70
42-32, R2........................................................$91.70
45-32, R3........................................................$91.70
50-32, R4........................................................$91.70
40-34, R5........................................................$91.70
42-34, R6........................................................$91.70
45-34, R7........................................................$91.70
50-34, R8........................................................$91.70
50-34, R32......................................................$91.70
52-34, R49......................................................$91.70
40-36 Combo..................................................$91.70
42-36, R10......................................................$91.70
45-36, R11 ......................................................$91.70
50-36, R12......................................................$91.70
CLUTCHING
07-616.....Polaris
07-617.....Polaris
07-618.....Polaris
07-619.....Polaris
07-620.....Polaris
07-621.....Polaris
07-622.....Polaris
07-623.....Polaris
07-627.....Polaris
07-614.....Polaris
07-615.....Polaris
07-625.....Polaris
07-626.....Polaris
07-628.....Polaris
07-286…..Ramp Grinding Block ..........................................................$23.95
07-863.....Alignment Washer, .025”, ea. ................................................$1.75
07-864.....Alignment Washer, .060”, ea. ................................................$1.00
07-865.....Alignment Washer, .115”, ea. ................................................$1.00
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Helixes,
Clutching
Order Line 800-883-0294
Arctic Bearcat
Driven Clutch
Arctic Helix Spacers
These spacers work great when dialing in
Arctic secondary helixes. On progressive cut
helixes, this adjusts the location of the ramp
against the roller or button altering the degree.
The oversized driven at 11 3/8” OD
allows you to start out in a lower gear
ratio without gearing your machine down, which in turn
affects top speed. Requires a 1 7/16” belt width. When used
with the Bearcat primary the belt length is approximately 2”
longer than the standard. Comes standard with roller cover,
45 degree helix and blue spring.
07-965.....Arctic
07-966.....Arctic
07-967.....Arctic
07-9681...Arctic
07-9691...Arctic
Spacer,
Spacer,
Spacer,
Spacer,
Spacer,
.020” Thick,
.040” Thick,
.060” Thick,
.090” Thick,
.125” Thick,
ea. ......................................$4.95
ea. ......................................$4.95
ea. ......................................$4.95
ea. ......................................$4.95
ea. ......................................$4.95
Arctic Button Kit/
Components
07-598…..Arctic Cat Bearcat Roller Driven Clutch ............................$306.85
Arctic Reverse Cam
Driven Clutch
This kit allows you to convert your roller
style clutch to a button style.
Kit
07-603A...Arctic Button Cover Kit, includes (1) 07-602, 07-604,
07-605 & (3) 07-606 ............................................................$84.95
Components
07-602.....Bushing for Cover & Moveable Sheave, OEM 0648-009 ......$9.95
07-604.....Cover Plate, (Button Style), OEM 0748-006 ......................$27.50
07-605.....Lencco Clutch Cover Adapter Kit ........................................$38.95
07-606.....Ramp Button, OEM 0148-177, ea. ........................................$3.09
The Arctic driven clutch is known for
excellent performance and being
maintenance free. Washers between
the sheaves adjust belt deflection. Nylon rollers allow use of
any aluminum helix. Has 1” bore and 1/4” key. Clutches come
with Helix and Spring.
Belt Deflection
Quick Adjuster
Button Style
07-601…..Arctic Reverse Cam Driven Clutch, 53°, Yellow Spring ....$359.95
Roller Style
07-600…..Arctic Reverse Cam Driven Clutch,
55/53°, Red/White Spring ..................................................$379.95
Designed for use with the Arctic Reverse Cam
secondary, these adjusters quickly change the
belt deflection by loosening one Allen head
bolt and turning the adjuster in or out. (07-019 Pictured)
07-018.....Belt Deflection Quick Adj., Arctic Cat ..................................$29.95
07-019.....Belt Deflection Quick Adj., 2007-10 Arctic Diamond Drive ..$64.95
Replacement Components
07-604.....Button Style Cover Plate, OEM 0748-006............................$27.50
07-606.....Ramp Button, OEM 0148-177, ea. (Need 3)..........................$3.09
07-607.....Nylon Roller, OEM 0648-082, ea. (Need 3) ..........................$4.60
07-609.....Nylon Roller Thrust Washer, OEM 0648-082, ea. (Need 6) ....$.30
07-611.....Cam Roller Pin, OEM 0648-097, ea. (Need 3) ......................$1.25
07-602.....Moveable Sheave & Cover Bushing, OEM 0648-009 ..........$9.95
07-608.....Moveable Sheave Cover ......................................................$10.95
07-610.....Stationary Sheave Cover ....................................................$11.50
07-612A...Screw, 12 pc...........................................................................$2.95
Arctic Reverse Cam Helixes
Straight & Progressive
Arctic Cat's reverse cam helixes, all are billet aluminum.
Shim Washers
Shim washers are needed when adjusting belt deflection.
07-850.....Washer, .005”, 1 1/2” ID x 2 1/8” OD ......................................$.95
07-852.....Washer, .010”, 1 1/2” ID x 2 1/8” OD ......................................$.95
07-854.....Washer, .015”, 1 1/2” ID x 2 1/8” OD ....................................$1.05
07-856.....Washer, .020”, 1 1/2” ID x 2 1/8” OD ....................................$1.15
07-858.....Washer, .025”, 1 1/2” ID x 2 1/8” OD ....................................$1.35
07-860.....Washer, .030”, 1 1/2” ID x 2 1/8” OD ....................................$1.35
07-862.....Washer, .060”, 1 1/2” ID x 2 1/8” OD ....................................$1.65
CLUTCHING
Helix
Helix
Helix
Helix
Helix
Clutch Alignment Washers
A perfect fit for all Driven clutches where alignment is a must. All have a 1”
ID and a 1 1/4" OD. Sold individually. ............................................................
07-863.....Alignment Washer, .025”, ea. ................................................$1.75
07-864.....Alignment Washer, .060”, ea. ................................................$1.00
07-865.....Alignment Washer, .115”, ea. ................................................$1.00
52
Straight
07-970…..Arctic Straight Helix, Billet, 51..............................................$49.95
07-971…..Arctic Straight Helix, Billet, 53..............................................$49.95
07-972…..Arctic Straight Helix, Billet, 55..............................................$49.95
07-973…..Arctic Straight Helix, Billet, 57..............................................$49.95
Progressive
07-974.....Arctic Progressive Helix, Billet, 50/44 ..................................$49.95
07-975.....Arctic Progressive Helix, Billet, 52/44 ..................................$49.95
07-976.....Arctic Progressive Helix, Billet, 54/44 ..................................$49.95
07-977.....Arctic Progressive Helix, Billet, 52/46 ..................................$49.95
07-978.....Arctic Progressive Helix, Billet, 54/46 ..................................$49.95
07-979.....Arctic Progressive Helix, Billet, 56/46 ..................................$49.95
07-980.....Arctic Progressive Helix, Billet, 54/48 ..................................$49.95
07-981.....Arctic Progressive Helix, Billet, 56/48 ..................................$49.95
07-982.....Arctic Progressive Helix, Billet, 58/48 ..................................$49.95
07-984.....Arctic Progressive Helix, Billet, 54/50 ..................................$49.95
07-986.....Arctic Progressive Helix, Billet, 56/50 ..................................$49.95
07-988.....Arctic Progressive Helix, Billet, 58/50 ..................................$49.95
07-989.....Arctic Progressive Helix, Billet, 60/50 ..................................$49.95
07-990.....Arctic Progressive Helix, Billet, 58/52 ..................................$49.95
07-991.....Arctic Progressive Helix, Billet, 60/52 ..................................$49.95
07-992.....Arctic Progressive Helix, Billet, 62/52 ..................................$49.95
07-994.....Arctic Progressive Helix, Billet, 62/54 ..................................$49.95
07-995.....Arctic Progressive Helix, Billet, 64/54 ..................................$49.95
07-996.....Arctic Progressive Helix, Billet, 62/56 ..................................$49.95
07-997.....Arctic Progressive Helix, Billet, 66/56 ..................................$49.95
07-998.....Arctic Progressive Helix, Billet, 64/58 ..................................$49.95
07-999.....Arctic Progressive Helix, Billet, 66/58 ..................................$49.95
Clutching
Order Line 800-883-0294
Team Rapid
Reaction Clutches
Team Clutch Accessories
Replacement Parts
08-093.....Roller, Clutch, TSS-98 & TSS-04, ea. ....$14.99
08-094.....T-27 Torx Helix Screw, 1/4”-28 x .625” ....$1.99
08-095.....Belt Deflection Screw with Nut ..............................................$3.95
07-638.....TSS-98 Windage Covers, Aluminum, with fasteners ..........$30.95
08-096.....Delrin Washer, Spring, 3 pc..................................................$10.00
07-637.....Spring Shim (under snap ring)................................................$2.00
Available in two different types, the
standard TSS-98 and the TSS-04. The
TSS-04 is the lightweight version. It
weighs approximately 1 lb less than the TSS-98. Helixes cannot be interchanged. The Team Rapid Reaction clutch is
stock on many of today's newer machines. If you're looking
for a clutch that out-performs all others, then you should try
one of these. Smooth and consistent upshift and backshift
provides greater efficiency, performance and durability. These
clutches are easily tunable with cam angles and springs. 10
3/4” OD clutch is sold without spring and helix.
Tools
08-090.....Spring Change Tool..............................$79.00
08-091.....Belt Removal Tool ..................................$4.95
Clutch Alignment Bars
TSS-98
07-254.....Clutch Alignment Tool, Ski-Doo ............................................$49.95
07-257.....Clutch Alignment Tool, Arctic Cat & Yamaha........................$49.95
TSS-98 Standard Clutches
07-632….TSS-98 TEAM Clutch, 1” shaft, 1/4” key ............................$295.00
TSS-04 Lightweight Clutches
07-820....TSS-04 TEAM Clutch, 1” shaft, 1/4” key ............................$249.00
07-822....TSS-04 TEAM Clutch, Ski-Doo (splined) ............................$249.00
07-823....TSS-04 TEAM Clutch, Pre 2000 Ski- Doo,
25mm shaft, keyed ............................................................$249.00
07-824....TSS-04 TEAM LW Rapid Reaction Clutch, Arctic Cat ........$249.00
07-825....TSS-04 TEAM LW Rapid Reaction Clutch, Yamaha ..........$249.00
TSS-04 & Tied
07-261.....Clutch Alignment Tool, Polaris ..............................................$49.95
07-259.....Clutch Alignment Tool, Ski-Doo ............................................$49.95
07-255.....Clutch Alignment Tool, Arctic Cat & Yamaha........................$49.95
Tool Kits
Kit includes belt-removal tool, T-27 Torx wrench, 1/8” Allen wrench, spacers
and instructions.
08-110…..Tool Kit, Polaris ....................................................................$29.99
08-111…..Tool Kit, Arctic Cat ................................................................$29.99
08-112…..Tool Kit, Yamaha ..................................................................$29.99
08-113…..Tool Kit, Ski-Doo ..................................................................$29.99
Team Tied Clutch
TEAM Industries introduces the most
advanced driven clutch in the snowmobile industry. The TEAM Tied
Driven Clutch is an improvement
from the TSS-04, in that the moveable sheave opens axially to the stationary sheave without
rotational movement. This translates to no scrubbing motion
on the belt face producing less heat and friction. Additionally,
all torque is transmitted through the helix, making clutch tuning much more precise. Does not include helix or spring.
The Team Twin Trax 8 bolt helix has
been developed to produce a quick
upshift and improved backshift with
excellent throttle response. The dual
angle option helix offers fine-tuning for
changing conditions. Available in a variety of multi-angles and straight angles.
These helixes will work in the standard TSS-98 clutches only.
These are the early version from Team and found on many
OEM sleds. S = Straight, F = Full Progressive, .46 = .46”
Progressive & ER has Reverse.
Full Progressive
08-046…..Twin Trax
Progressive
08-054…..Twin Trax
08-057…..Twin Trax
08-063…..Twin Trax
08-066…..Twin Trax
08-080…..Twin Trax
Helix, 56/44 F - 56/46 F ......................................$99.00
Helix,
Helix,
Helix,
Helix,
Helix,
54/34
54/38
58/42
68/40
70/44
.46
.46
.46
.46
.46
-
54/36
54/40
58/44
68/44
70/42
.46
.46
.46
.46
.46
................................$99.00
ER ..........................$99.00
ER ..........................$99.00
ER ..........................$99.00
ER ..........................$99.00
Straight
08-074…..Twin Trax Helix, 40 S & 44 S ..............................................$99.00
08-089…..Twin Trax Helix, 42 S & 44 S ER ........................................$99.00
CLUTCHING
07-813....TEAM Tied Secondary Clutch, 1” shaft, 1/4” key ................$299.00
07-815....TEAM Tied Secondary Clutch, Splined, Polaris ..................$299.00
07-817....TEAM Tied Secondary Clutch, Splined, Yamaha ................$299.00
07-819....TEAM Tied Secondary Clutch, Splined, Ski-Doo ................$299.00
TEAM Tied Helixes
07-8131..TEAM Tied Helix, 71-57.46, 71-55.46...$109.00
07-8133..TEAM Tied Helix, 70-59.46, 70-57.46...$109.00
07-8137..TEAM Tied Helix, 73-59.46, 73-57.46...$109.00
07-8139..TEAM Tied Helix, 75-59.46, 75-57.46...$109.00
07-8140..TEAM Tied Helix, 77-59.46, 77-57.46...$109.00
07-8142..TEAM Tied Helix, 77-59.56, 77-57.56...$109.00
07-8143..TEAM Tied Helix, 76-61.46, 73-61.36...$109.00
07-8144..TEAM Tied Helix, 66-62.33, 66-60.33 ................................$109.00
07-8145..TEAM Tied Helix, 73-63.46, 73-61.46 ................................$109.00
07-8146..TEAM Tied Helix, 76-63.46, 76-61.46 ................................$109.00
07-8147..TEAM Tied Helix, 78-63.46, 78-61.46 ................................$109.00
07-8148..TEAM Tied Helix, 80-63.46, 80-61.46 ................................$109.00
07-8149..TEAM Tied Helix, 80-64.46, 81-61.46 ................................$109.00
07-8150..TEAM Tied Helix, 73-65.46, 73-63.46 ................................$109.00
07-8151..TEAM Tied Helix, 78-65.46, 78-63.46 ................................$109.00
07-8152..TEAM Tied Helix, 73-66.36, 73-64.36 ................................$109.00
07-8156..TEAM Tied Helix, 66-62F, 64-60F ......................................$109.00
07-8157..TEAM Tied Helix, 70-65F, 68-63F ......................................$109.00
07-8160..TEAM Tied Helix, 63 Straight, 61 Straight ..........................$109.00
07-8161..TEAM Tied Helix, 67 Straight, 63 Straight ...........................$109.00
07-8164..TEAM Tied Helix, 70-63.46, 63 Straight ..............................$109.00
07-8165..TEAM Tied Helix, 78-64.46/64-59F, 78-62.46/62-57F ........$109.00
07-8166..TEAM Tied Helix, 80-65-61.46/.25/.25,
78-63-61.46/.25/.25 ............................................................$109.00
TSS-98 Team Helixes
53
Clutching
Order Line 800-883-0294
TSS-04 Team Helixes
SLP High Performance Driven Springs
The TSS-04 helixes only require 4 bolts
to be mounted to the lightweight clutch.
They cannot be used in the TSS-98
clutches. .46 Progressives and Straight
helixes are listed.
A winning combination of driven springs from
SLP. Listed from soft to stiff. Rates are
expressed in load at 2.5” and 1.375”. The
measurement is in pounds.
.46 Progressive
08-276…..Team LW
08-252…..Team LW
08-264…..Team LW
08-250…..Team LW
08-258…..Team LW
08-268…..Team LW
08-272…..Team LW
Helix
Helix
Helix
Helix
Helix
Helix
Helix
-
58/44
66/40
66/44
70/40
70/44
70/46
70/48
.46
.46
.46
.46
.46
.46
.46
x
x
x
x
x
x
x
58/42
66/38
66/40
70/38
70/40
72/48
72/44
.46
.46
.46
.46
.46
.46
.46
-
420517LW
420404LW
420538LW
420402LW
420523LW
420552LW
420574LW
..........$99.00
..........$99.00
..........$99.00
..........$99.00
..........$99.00
..........$99.00
..........$99.00
Color
Wire Diam.
Length
Coil
Force lbs.
Price
07-066
Black/Gold
.187”
3.50”
6
22-44
21.95
07-065
Black
.180”
5.00”
5
40-60
21.95
07-067
Black/Blue
.192”
3.56”
5
30-65
21.95
07-068
Black/Gray
.209”
3.25”
5
36-80
21.95
07-070 Black/Orange
.192”
4.50”
5
56-90
21.95
07-069 Yellow/Purple
.209”
3.72”
5
40-95
21.95
Team Secondary Springs
Arctic Driven Springs
Team Secondary springs for the TSS-98, TSS-04 and Tied
clutches. Force lbs is measured at 2.2” and 1.1”.
All springs are OEM Arctic. Length does not
include tangs.
PN#
Wire Diam.
Length
Coil
OEM
Color
Price
07-679
.220”
4.50”
4
0748-025
Green
23.95
07-682
.215”
3.50”
4
0648-114 Red/White
23.95
07-680
.205”
3.50”
5
0148-227
23.95
Yellow
PN#
Color
Wire Diam.
Length
Coil
Force lbs.
Price
08-034
Red/Yellow
.207”
5.00”
4
100-150
24.95
08-036
Red/Gray
.200”
6.30”
4
125-175
24.95
07-834
Green/Black
.200”
5.70”
5.5
135-198
24.95
08-035
Red/White
.218”
4.00”
4.5
100-200
24.95
Blue/Black
.218”
4.63”
4.5
120-200
24.95
07-684
.192”
3.75”
5
0648-012
Blue
25.95
07-686
.185”
3.75”
5
0648-010
White
29.85
08-021
07-688
.185”
3.75”
5
0648-060
Blue
27.25
08-037
Red/Blue
.218”
5.25”
4
140-200
24.95
07-835
Black/Yellow
.200”
5.95”
5.5
145-208
31.95
08-038
Red/Green
.218”
4.13”
4
120-220
24.95
08-020
Black/Green
.218”
4.87”
4.5
140-220
24.95
08-041
Black/Red
.218”
5.60”
4
155-222
24.95
08-039
Red/Black
.218”
4.75”
4
140-240
24.95
08-017
Black/Purple
.230”
5.06”
4.5
160-240
24.95
08-040
Red/Pink
.235”
4.00”
4
140-260
24.95
08-018
Black/Blue
.230”
5.50”
4.5
180-260
24.95
08-007
Black/Silver
.235”
4.25”
4
160-280
24.95
07-690
.162”
3.87”
4
0148-176
Black
21.95
Thunder Shift Driven Springs
Manufactured by Thunder Products. Length does not
include tangs.
PN#
Wire Diam.
Length
Coil
07-498
.220”
4.50”
4
Force lbs. Description
Price
Arctic Cat
Purple/White
28.00
85-145
07-499
.180”
4.50”
5
50-60
Polaris Blue
12.99
07-500
.210”
4.20”
5
75-115
Ski-Doo
Yellow
22.95
07-501
.250”
4.00”
4
200-315 Ski-Doo RER
Black
08-015 Black/Orange
22.95
Polaris Driven Springs
Force lbs. Description
.235”
4.87”
4
180-280
24.95
08-009
Black/Gold
.245”
4.00”
4
160-300
24.95
08-016
Black/Lm.Gr
.245”
4.50”
4
180-300
24.95
Arctic Cat Drive Belts
Genuine Polaris secondary springs. Compression at
2 1/2” & 1 3/8”. Springs are listed from soft to stiff.
Length does not include tangs.
CLUTCHING
PN#
PN#
Wire Diam.
Length
Coil
07-826
.172”
3.62”
5
21-45
Red
23.75
07-832
.177”
3.87”
5
23-48
Black
31.95
07-827
.187”
3.50”
6
24-49
Gold
31.95
07-828
.187”
3.50”
5
25-54
Silver
31.95
07-829
.192”
3.62”
5
29-64
Blue
31.95
07-831
.183”
4.25”
5
42-75
Silver/Blue
31.95
07-833
.192”
4.56”
5
56-90
Blue/Orange
31.95
07-830
.209”
3.37”
5
45-92
Gray
31.95
Genuine Arctic Cat belts. If the belt you need is not
seen here, ask for availability and we'll do our
best to help you find it. Some belts may have
substitutes for extended life use.
Price
54
1 3/8” Wide Belts
07-341…..Arctic Drive Belt, 1 3/8” x 43 5/8”, OEM 0227-103 ............$34.95
07-342…..Arctic Drive Belt, 1 3/8” x 43 5/8”, High Performance,
OEM 0627-006 ....................................................................$49.95
07-343…..Arctic Drive Belt, 1 3/8” x 47 3/4”, High Performance,
Hard Compound, OEM 0627-010 ........................................$54.95
07-344…..Arctic Drive Belt, 1 3/8” x 47 3/4”, High Performance,
OEM 0627-012 ....................................................................$49.95
1 13/32” Wide Belts
07-346…..Arctic Drive Belt, 1 13/32” x 47 3/4”, High Performance,
Hard Compound, OEM 0627-020 ........................................$54.95
07-347…..Arctic Drive Belt, 1 13/32” x 47 3/4”, High Performance,
OEM 0627-021 ....................................................................$52.95
1 7/16” Wide Belts
07-345…..Arctic Drive Belt, 1 7/16” x 49”, OEM 0627-014 ..................$54.95
Clutching
Order Line 800-883-0294
Ultimax XS Belts
Wahl Drive Belts
Available in a medium compound and also a
hard CVT compound.
Today's high horsepower machines outperform
many of the belts available today. The new
Ultimax XS is the belt that racers have been
waiting for. Revolutionary new compound and
Aramax cord allow the XS to run cooler, longer
and faster. Because of the thickness of the XS belt it may look like it is
riding high in the secondary. The circumference of these belts measures longer than conventional belts because of the deep top cog.
1 3/8” Wide Belts
07-652.....Old SD, 43-5302, 1 3/8” x 44 1/8”, 10 1/2” CD ....................$62.95
07-654.....Wahl, 43-0400, 1 3/8” x 45 1/2”, 11 3/8” CD ........................$62.95
07-655.....Wahl CVT, 1 3/8” x 45 1/2”, 11 3/8” CD................................$73.95
07-659.....Polaris, 138-4716 CVT, 1 3/8” x 47 1/4”, 12” CD ................$73.95
07-658.....Polaris, 43-5244, 1 3/8” x 47 1/4”, 12” CD ..........................$62.95
07-653.....Ski-Doo CK3, 46-1154, 1 3/8” x 51 7/8”, 14.22” CD ............$77.95
1 7/16” Wide Belts
07-665.....Ski-Doo, 144-4450, 1 7/16” x 44 1/2" ..................................$73.95
07-666.....Ski-Doo CVT, 1 7/16" x 44 1/2”Top Cog ..............................$73.95
07-668.....144-4475, 1 7/16" x 44 3/4"..................................................$73.95
07-670.....1-8970 CVT, 1 7/16" x 44 3/4", Top Cog ..............................$73.95
07-663.....Polaris, 1-0031, 1 7/16'' x 44 7/8'', 10.625'' CD....................$77.95
07-662.....Polaris, 1-9553, 1 7/16'' x 46 5/8'', 11.50'' CD ......................$77.95
07-672.....1-8618 CVT, 1 7/16" x 47 1/4", 12” CD ................................$73.95
07-674.....1-8551, 1 7/16" x 51 3/4"......................................................$73.95
07-657.....Ski-Doo CK3, (46-5523), 1 7/16'' x 51 7/8'', 14.22'' CD ......$77.95
07-675.....144-5300/1-8550, 1 7/16" x 53 1/8" ....................................$73.95
Wide Belts
07-661.....Polaris, 1-9675, 1 1/2'' x 48 5/8'', 12.5'' CD..........................$73.95
07-676.....194-4414/1-9381), 1 15/16" x 44 3/16” ................................$73.95
Arctic
07-094…..XS810 - Ultimax XS Belt, 1 7/16” x 44 11/16”, Replaces
Arctic Cat 0627-034 and Ultimax3 146-4440U3
(fits 1 7/16” x 44 3/16”) ........................................................$99.95
07-097…..XS817 UltimaxXS Belt, Arctic Cat, 1 15/32" x 46 1/8",
Replaces 0627-046, fits F8, M8, Crossfire 1000,
F 1000, M1000 ....................................................................$99.95
07-086…..XS802 - Ultimax XS Belt, 1 3/8” x 48 1/4”, Replaces
Arctic 0627-020, 0627-021, and Ultimax 140-4748
(fits 1 3/8" x 47 3/4") ............................................................$99.95
07-092…..XS814 - Ultimax XS Belt,1 7/16” x 49 1/2”, Replaces
Bearcat 0627-014 (fits 1 7/16” x 49”) ..................................$99.95
Polaris
07-095…..XS813 - Ultimax XS Belt, 1 7/16” x 46 1/2”, Polaris FST/FS,
2006 to present, Replaces 3211099
(fits 1 7/16" x 45 5/8") ..........................................................$99.95
07-093…..XS809 - Ultimax XS Belt, 1 7/16” x 47 1/8”, Replaces
Polaris 3211080 and Ultimax3 144-4640U3
(fits 1 7/16" x 46 5/8") ..........................................................$99.95
07-096…..XS816 UltimaxXS Belt, Polaris, 1 7/16'' x 48 3/32'',
Replaces 3211075 and Ultimax 3 144-4740U3 (1 7/16'' x 47 1/4'')
12'' Centers ..........................................................................$99.95
Ski-Doo
07-087…..XS803 - Ultimax XS Belt, 1 13/32” x 44 1/8”, Replaces
Ski-Doo 417-300-197 and Ultimax 140-4352
(fits 1 13/32” x 43 3/4”) ........................................................$99.95
07-090…..XS806 - Ultimax XS Belt, 1 7/16” x 44 1/8”, Replaces Ski-Doo
417-300-127 and Ultimax3 144-4353U3
(fits 1 7/16” x 43 3/4”) ..........................................................$99.95
07-088…..XS804 - Ultimax XS Belt, (1000 w/ SDI) 1 7/16” x 44 7/8”,
Replaces Ski-Doo 417-300-189 and Ultimax 3
147-4416U3 (fits 1 7/16” x 43 7/8") ....................................$99.95
07-091…..XS807 - Ultimax XS Belt, Ski-Doo CK3, 1 7/16” x 51 3/4”,
Replaces Ultimax3 140-5157U3 (fits 1 7/16" x 51 5/8") ......$99.95
Yamaha
07-089…..XS805 - Ultimax XS Belt, (All RX-1 and Apex),
1 3/8” x 45 1/8”, Replaces Yamaha 8DN-17641- 00 and
Ultimax3 138-4432U3 , (fits 1 3/8” x 44 1/2”) ......................$99.95
Ultimax Pro
Ultimax 3 belts have evolved into Ultimax Pro.
The new Pro belt features a thicker cross section
for greater crosswise rigidity providing less slippage and quicker acceleration.
1 3/8” Wide Belts
07-6471...138-4332U4, 1 27/64” x 43 7/8", Ski-Doo DSA
(fits 1 3/8” x 43 1/2”) ............................................................$71.95
07-6491...138-4400U4, 1 7/16” x 44 13/16”, Old Ski-Doo
(fits 1 3/8” x 44”) ..................................................................$71.95
07-6481...138-4432U4, 1 27/64” x 45 1/4”, Pre ‘06 Yamaha
(fits 1 3/8” x 44 3/8”) ............................................................$71.95
07-6511...138-4716U4, 1 7/16” x 48 1/16", Polaris
(fits 1 3/8” x 47 1/4) ..............................................................$71.95
07-6451...138-4748U4, 1 13/32” x 48 1/4", Arctic
(fits 1 3/8” x 47 3/4") ............................................................$71.95
07-6391...138-5232U4, 1 7/16'' x 53 5/16'', VMAX
(fits 1 3/8'' x 52 3/4'') ............................................................$71.95
1 13/32” Wide Belts
07-6361...140-4352U4, 1 33/64” x 44 7/16”, REV
(fits 1 13/32” x 43 13/16”) ....................................................$71.95
07-6431...140-5157U4, 1 29/64” x 52 11/16”, CK3
(fits 1 13/32” x 51 7/8”) ........................................................$71.95
1 7/16” Wide Belts
07-6421...144-4353U4, 1 15/32” x 44 5/8”, REV
(fits 1 7/16” x 43 13/16”) ......................................................$71.95
07-6441...144-4640U4, 1 31/64" x 47 1/8", Replaces Polaris 080,
078, 122 & 115 (fits 1 7/16" x 46 5/8") ................................$71.95
07-6461...144-4740U4, 1 31/64"x 48 1/8", Replaces Polaris
074 & 075 (fits 1 7/16"x 47 5/8") ..........................................$71.95
07-6401...144-4900U4, 1 31/64” x 49 5/8”, Arctic Bearcat
(fits 1 7/16” x 49”) ................................................................$71.95
Polaris Drive Belts
Genuine Polaris drive belts manufactured
by Dayco.
10.625” Center Distance
07-329.....Drive Belt (3211104) 1 7/16" x 44 7/8" Double Cog ............$80.45
07-327.....Drive Belt (3211114) 1.46” x 45.20” Double Cog................$198.44
“Dummy” Clutch Tool
11 1/2” Center Distance
07-330.....Drive Belt (3211078), 1 7/16” x 46 5/8” Double Cog ............$80.45
07-331.....Drive Belt (3211080), 1 7/16” x 46 5/8” Double Cog, CVT ..$80.45
07-332.....Drive Belt, 1.46'' x 46 3/4'',Double Cog, OEM 3211115 ....$178.49
Precision machined from steel, this tool allows you to
remove and replace the drive clutch cover quickly and easily. Easily change weights and springs. It can be used with
the clutch on or off the engine. All kits come complete with
tool and instructions.
12 1/2" Center Distance
07-339.....Drive Belt (3211073), 1 7/16” x 48 3/8” Double Cog ..........$80.45
07-340.....Drive Belt (3211065), 1 7/16” x 48 3/8” Double Cog, CVT ..$80.45
55
07-030…..Dummy Clutch Tool, Polaris Clutches with 3/4" Puller
(Not '97-'99 14mm) ..............................................................$54.95
07-031…..Dummy Clutch Tool, Micro Reactor, '97 and newer Comet
108's and 4 Pro's with 5/8” Puller ........................................$54.95
07-032…..Dummy Clutch Tool, Arctic Cat 6 & 9 Tower with 9/16”
Puller (Not 4-Arm Clutches) ................................................$54.95
07-033…..Dummy Clutch Tool, Arctic Cat,14mm, F, M & CF
1000 '07 - '09 and all 2010 ..................................................$54.95
07-034…..Dummy Clutch Tool, Yamaha with 14mm Puller..................$54.95
07-035…..Dummy Clutch Tool, Ski-Doo T.R.A. II's (Not 583 Motor) ....$62.95
07-036…..Dummy Clutch Tool, Ski-Doo T.R.A. III's and V clutches ....$62.95
CLUTCHING
12” Center Distance
07-333.....Drive Belt (3211042), 1 3/8” x 47 1/4”, 12” CD, Standard,
32 degree ............................................................................$72.95
07-334.....Drive Belt (3211070), 1 3/8” x 47 1/4”, 12” CD, Standard,
28 degree ............................................................................$72.95
07-335.....Drive Belt (3211067), 1 3/8” x 47 1/4” Double Cog ..............$59.50
07-336.....Drive Belt (3211066), 1 3/8” x 47 1/4” Double Cog, CVT ....$80.45
07-337.....Drive Belt (3211074), 1 7/16” x 47 5/8” Double Cog ..........$80.45
07-338.....Drive Belt (3211075), 1 7/16” x 47 5/8” Double Cog, CVT ..$80.45
Clutching
Order Line 800-883-0294
Clutch Spider
Removal Tool
Gram Scale
Weigh your clutch weights with a digital gram scale by Nexus. It has a 250
gram weight capacity with 1/10 gram
accuracy. Features LCD digital read
out with full calibration and a 4” x 4”
stainless steel platform. Comes with A/C adapter, calibration
weight and with or without a carry case.
Designed to easily remove clutch
spiders. Removes jam nut on
Polaris clutches by simply turning
spanner wrench over. Order socket for Arctic clutches separately. The clutch holder bolts easily to a bench or can be
held in a vise. Clutch Tool includes spanner wrench, clutch
holder and handle.
07-284…..Gram Scale with Case ......................................................$214.95
07-285…..Gram Scale Only (case not included)................................$183.95
Clutch Tool Kits
07-273…..Clutch Tool, 3 Tower ..........................................................$139.95
07-274…..Clutch Tool, for 108 4-PRO................................................$139.95
Spanner Wrenches
07-275A...Spanner Wrench ..................................................................$55.00
07-276A...Spanner Wrench, for 108 4-PRO ........................................$55.00
07-2760…Spanner Wrench Threaded Inserts, 4 pc. ..............................$3.95
Clutch Holding Fixture & Sockets
07-277.....Clutch Holding Fixture, Aluminum ........................................$66.95
07-278.....Socket, 1 1/2” Arctic Cat, Comet ........................................$16.95
07-279.....Socket, 1 7/16” New Arctic Cat ..........................................$16.95
Ramp Grinding Block
Grind your weights on a Ramp Grinding
Block. Holds three of any Comet, Polaris,
Arctic or other weight at once so that they
may be ground evenly.
07-286…..Ramp Grinding Block ..........................................................$23.95
Clutch Press Tools
Clutch Pullers
Starting Line Products makes a tool for
servicing drive and driven clutches.
These tools will compress the spring
for easy cam arm changes or cover
removal on drive clutches. For service
on a driven clutch, these tools will
compress the helix and hold it in place
for snap ring removal and installation. Replacement finger
buttons are available as well as finger adaptors for use on
TEAM Rapid Reaction clutches.
A puller manufactured by Micro
Belmont Engineering that is long
enough to extend outside your belly
pan. In some 108 EXP and 108
4-PRO Comet puller applications the
thread should be measured to ensure proper puller fit.
07-287…..Clutch Puller, Arctic 1996-Present 9 Tower ........................$34.95
07-307…..Clutch Puller, Arctic, '07-'09 1000's, all 1100's and
all 2010 Models ....................................................................$34.95
07-288…..Clutch Puller, Yamaha, Polaris & Comet with 9/16” Thread $34.95
07-289…..Clutch Puller, Arctic Comet 1990-95 ....................................$34.95
07-305…..Clutch Puller, Arctic '07 Jaguar Z1 ......................................$34.95
07-290…..Clutch Puller, 102C, 108C, 108 EXP SD 1:7.5, Most
Polaris, OEM 3/4” Thread ....................................................$34.95
07-291…..Clutch Puller, Ski-Doo, Comet, old 1:10 Taper 108 EXP,
new 1:7.5 Taper 108 4-PRO 5/8” Thread ............................$34.95
07-292…..Clutch Puller, Polaris '97-’99 600 & 700cc Twins with
14mm bolt ............................................................................$34.95
07-298…..Clutch Puller, Polaris '99-’03 700 & 800XCR Fuji, 440
Edge, 2000-Present Domestic Twins ..................................$34.95
07-299…..Clutch Puller, Polaris, 440 & 550 Fuji Fan ..........................$34.95
07-294…..Clutch Puller, Ski-Doo TRA 1998-Present ..........................$34.95
07-293…..Clutch Puller, Yamaha..........................................................$34.95
Clutch Tools
07-280…..SLP Clutch Press, Polaris/Comet/AC/Yamaha
and Ski-Doo Driven except RER ..........................................$87.95
Components
07-303…..Replacement Finger Buttons, ea. ............................................$.95
07-268…..Clutch Press Finger Adapters for TEAM Clutches, pr. ........$15.95
SLP Clutch Tools
The Pin and Roller Tool simplifies removing the pin and roller from a Polaris
spider. It self-aligns, removes and aligns new parts including shims and pins.
The SLP Button Tool removes buttons quickly and without damage on a
Polaris clutch. You can easily change clutch weights without removing the
outer cover or clutch from the crankshaft by using the SLP Clutch Sheave
Tool.
Clutch
Compression Tool
07-281…..SLP Pin & Roller Tool ..........................................................$25.95
07-282…..SLP Button Removal Tool ....................................................$16.50
07-283…..SLP Clutch Sheave Clamp ....................................................$7.75
CLUTCHING
This unique tool compresses the
drive clutch and holds it open with a
special clamp to allow clutch weight removal in minutes without removing the clutch bolt or any cover bolts.
07-080.....Clutch Compression Tool, Arctic Comet,
102C/ 108C/ 108 EXP ..........................................................$22.75
07-081.....Clutch Compression Tool, Arctic 9 Tower-'96 and Newer ....$24.95
07-082.....Clutch Compression Tool, Yamaha YPZ ..............................$22.75
07-084.....Clutch Compression Tool, Polaris ........................................$22.75
07-281
56
07-282
07-283
Clutching / Braking
Order Line 800-883-0294
SLP Spring
Compression Tool
Clutch Guard Material
Clutch guard material available in two
widths. 6” wide, and 8 1/2” wide. Both
are a 2-ply belt rating with rubber backing on one side and are .135” thick.
NSSR and NHRA approved. Use this on
the inside or outside of the shroud or
clutch cover for protection. Priced per foot.
For Ski-Doo RER Clutch
Change helix or spring easily and safely
with this tool that is designed to be used
in a vise or mounted to a bench.
07-269…..Ski-Doo RER Clutch Compression Tool ..............................$69.95
TRA Clutch
Holding Wrench
07-789.....Clutch Guard Material, 6”, per ft. ............................................$3.75
07-790.....Clutch Guard Material, 8 1/2”, per ft.......................................$4.25
Belt & Clutch Cleaner
CNC Punched and Plasma cut, this
holding tool allows you to hold your
TRA clutch during installation &
removal. This tool makes it so much easier!
A high performance belt, clutch and pulley
cleaner that safely removes belt impurities
while leaving no film, oils or residue. This is the
only manufacturer recommended cleaner on
the market today. Comes in 4 oz. Bottles. Will
not cause premature belt failure.
07-251…..TRA Clutch Holding Wrench ..............................................$29.95
TRA Button
Retaining Tool
09-402.....Belt and Clutch Cleaner, 4 oz. Bottle ....................................$7.95
Braking
This tool is a must for all Ski-Doo owners. It holds clutch buttons in place during clutch maintenance, assembly & disassembly. Sold in sets of three.
Lever-Activated
Master Cylinder
08-097…..TRA Primary Clutch Button Retaining tool, 3 pc..................$19.99
Clutch
Alignment Bars
The MCP lever activated master cylinder
was originally designed for go-kart racing
applications, but has found its way into many others. This
unit is available in lever up style, but can be converted to a
lever down configuration. Use with automotive type brake
fluid. External dimensions are 2 1/2” long, 2 5/8” tall & 1 1/8”
wide. The hole spacing is 1 5/16”. Piston diameter is 7/8”.
Clutch alignment bars for various
makes and models of sleds.
Polaris
07-261…..Clutch Alignment Tool, Polaris TSS-04 ................................$49.95
07-297…..Polaris Clutch Alignment Bar, P-85 & Button Secondary ....$19.95
Arctic Cat
07-255…..Clutch Alignment Tool, Arctic Cat TSS-04............................$49.95
07-257…..Clutch Alignment Tool, Arctic Cat TSS-98............................$49.95
07-295…..Clutch Alignment Bar, for Reverse Cam Arctic Clutch ........$24.95
Ski-Doo
07-254…..Clutch Alignment Tool, Ski-Doo REV & RT TSS-98 ............$49.95
07-259…..Clutch Alignment Tool, Ski-Doo REV & RT TSS-04 ............$49.95
Yamaha
07-255…..Clutch Alignment Tool, Yamaha 97-Present TSS-04 ..........$49.95
07-257…..Clutch Alignment Tool, Yamaha 1997-Present TSS-98 ......$49.95
08-168…..MCP Master Cylinder, Lever-Up ..........................................$62.50
Master Cylinders
Both have split mounting brackets
to fit any 7/8” handlebar. The
Polaris/Wilwood master cylinder
features a larger reservoir.
Reservoir Repair Kit includes reservoir, cover w/gasket,
screws & o-ring. The 08-210 Connector can be used in the
Arctic Wilwood Master Cylinders to convert to 1/8” NPT.
These Wilwood master cylinders have 5/8” plungers.
Tension Adjustment Scale
Polaris
08-105…..Polaris/Wilwood Master Cylinder ......................................$165.95
Arctic
08-102…..Arctic/Wilwood Master Cylinder ........................................$136.45
Parts/Accessories
08-107…..Polaris/Wilwood Reservoir Repair Kit ..................................$45.85
08-210…..Connector, 1/8” NPT ..............................................................$8.95
07-012.....Tension Adjustment Scale ....................................................$31.95
57
CLUTCHING/BRAKING
An easy way to measure and set
tensions on your snowmobile. This
new scale has a range of 0 to 25
lbs. It is very accurate and has a
very pronounced marker to help measure more precisely. It
can be used in several areas on a snowmobile that call for
specific tension. For example, it is great for checking secondary belt tension and track tension. This tool is a must for anyone performance minded.
BRAKING
Braking
Order Line 800-883-0294
Ultra Brake Levers
Billet Wilwood
Dual Caliper
Extended brake levers for better
reach and increased leverage.
Dipped in soft PVC rubber for
excellent gripping. Constructed
of billet aluminum, they can be reformed for desired fit.
This black anodized billet two-piston
caliper is rigid and lightweight.
Weighing only 1.4 lbs., it has internal
fluid passage from one side to the other with a 1/8” NPT inlet
for your brake hose connection. Piston size is 1 3/4” and
mounting holes are on 3 3/4” centers. Using one each of the
listed fittings, the 38” Wahl Champ hose connects directly to
the Arctic/Wilwood Master Cylinder and this caliper. Order
pads separately.
Polaris Standard Brake Levers
08-114…..Polaris Ultra Brake Lever, Black ..........................................$39.95
Arctic & Polaris Wilwood Brake Levers
08-120.....Wilwood Ultra Brake Lever, Black ........................................$39.95
Ski-Doo Brembo Brake Levers
08-130.....Ski-Doo Ultra Brake Lever, 1996 to Present, Black ............$39.95
Caliper
08-197.....Billet Dual Caliper, Wilwood................................................$114.95
Brake Pads
08-233.....Wilwood Brake Pad, pr. ........................................................$34.95
Fittings
08-193…..Brass Plug w/Screwdriver Slot, 1/8” NPT ..............................$1.65
08-194…..Connector, 1/8” x 1/8” NPT ....................................................$3.65
08-189…..Elbow, 1/8” NPT ....................................................................$3.65
Repair
08-238......Billet Wilwood Caliper Piston & Seal Kit..............................$79.95
08-166......Body O'Ring, Billet Dual Caliper, Wilwood, ea. ....................$2.25
08-164......Stainless Steel Piston, Billet Dual Caliper, Wilwood, ea. ....$16.25
08-165......Square O'Ring, Piston, Billet Dual Caliper, Wilwood, ea.......$3.45
Hose
08-221......Stainless Steel Hose, Wahl Champ, 38”..............................$52.95
Yamaha Hydraulic Brake Levers
08-126.....Yamaha Ultra Brake Lever, Hydraulic Systems, Black ........$39.95
08-128.....Yamaha Ultra Brake Lever, Hydraulic Systems, Blue ..........$39.95
Polaris/Hayes Brake Levers
Gen II & Edge Chassis
08-146......Polaris/Hayes Levers,
08-140......Polaris/Hayes Levers,
08-142......Polaris/Hayes Levers,
08-144......Polaris/Hayes Levers,
08-145......Polaris/Hayes Levers,
Gen
Gen
Gen
Gen
Gen
II
II
II
II
II
&
&
&
&
&
Edge
Edge
Edge
Edge
Edge
Chassis, Black ........$39.95
Chassis, Purple ......$39.95
Chassis, Red ..........$39.95
Chassis, Blue ..........$39.95
Chassis, Yellow ......$39.95
Billet MCP Dual Caliper
Billet Spot Caliper
Replacing the Enginetics Dual Brake system is this dual caliper system from MCP.
It is flush mounting, which allows you to
bolt directly to the side of the tunnel for
applications where the disk is outside on
the drive shaft. It can also be mounted to any flat surface.
Caliper is 3 5/8” long, 2 1/4” tall and 3 1/8” deep. Piston
diameter is 1 3/8” and mounting holes are on 2 1/4” centers.
Brake pad to brake disc clearance is adjustable. Comes complete with pads.
We found a great replacement caliper
for the 175 and 150 series Hurst
Airheart brake calipers. This caliper will
even use the same brake pads as the
175. This all Billet caliper is lightweight,
but heavy duty with stopping power. The
supplied aluminum spacer allows the
caliper to fit over your brake disc. Hose inlet is 1/8” NPT. The
mounting holes are on 2 5/16” centers. Brake pads are sold
separately.
08-190.....Billet MCP Dual Caliper, Black ..........................................$156.50
08-244.....MCP and Enginetics Brake Pad, Hard, ea. ..........................$22.00
Caliper
08-171A...Billet Spot Caliper, 1.75” Piston Diameter, w/ Billet spacer$120.95
Pads
08-173…..Brake Pad-Cold Stopper, fits Airheart and Wilwood, pr. ......$18.95
Components
08-167…..Spacer, Wilwood Billet Spot Caliper (1/4'' thick) ....................$4.95
08-189…..Elbow, 1/8” NPT ....................................................................$3.65
Wilwood Brake Pad
These PolyMatrix disc brake pads are
the most aggressive we have found.
They are the same pads used on our
Prostock & Champ 440 machines.
They work well with cool or hot brake
discs. Will fit right into the Arctic Wilwood caliper as well as
the billet dual caliper. Sold as a set.
Arctic/Wilwood Caliper
Genuine Arctic Cat Wilwood dual caliper
brake. Piston diameter is 1 3/4” with 3
3/4” centers on mounting holes.
Complete with pads.
08-233…..Wilwood Brake Pad, pr. ......................................................$34.95
Caliper
08-196....Arctic Cat/Wilwood Dual Caliper ........................................$179.95
Replacement Pads
08-233....Genuine Wilwood Brake Pad, pr. ..........................................$34.95
08-416....SLP Arctic Cat Carbon/Kevlar Brake Pad, pr. ......................$66.95
08-420....BRAKING Brake Pad, pr. ......................................................$36.95
58
Braking
Order Line 800-883-0294
Brake Hubs
These are the same calipers used on
Polaris machines through 1992.
08-304…..Arctic Steel Hub, 1” Bore, 1/4" Key, fits 08-302 ..................$36.90
08-305…..Arctic Aluminum Hub, 7/8” Bore, 1/4" Key ..........................$34.95
08-314…..Brake Hub, 1'' with 1/4'' Key, fits 08-403..............................$45.00
08-320…..Polaris Aluminum Hub, 1” Bore, 1/4” Key ............................$42.00
08-322…..Polaris Aluminum Hub, Splined............................................$42.00
Key
08-309…..Hardened 1/4" Woodruff Key ................................................$3.35
08-152.....Kelsey Hayes Caliper, Piston Side Only ..............................$65.00
08-227.....Kelsey Hayes Brake Pad, ea. ..............................................$22.95
Kelsey Hayes
Driveshaft Calipers
Wave Brake Discs and
Wahl Bros. Hubs
This allows a lower brake to be
installed without extending your driveshaft. The 08-160 caliper mounts flush
to the outside of the tunnel with a hole
to allow the piston to pass through the tunnel and bulkhead.
Can be used on machines with four drive wheels. The 08-162
caliper mounts inside the tunnel. It comes supplied with pads,
an aluminum backing plate and fasteners. Mounting holes
are on 2 5/16” centers.
SLP Ultra-Lite Wave Brake Discs and
Wahl Bros. Hubs. The recessed hubs work
great for driveshaft brakes, allowing the disc to be closer to
the tunnel side. All have 1/4” Key
08-405A
08-323A
08-327A
08-328A
Ultra-Lite 7 15/16'' Wave Brake Disc & Hub, 1'' Bore ........$189.95
Ultra-Lite 8 5/8'' Wave Brake Disc & Hub, 1'' Bore ..........$189.95
Ultra-Lite 7 15/16'' Wave Disc & Aluminum Hub, 1'' Bore $174.95
Ultra-Lite 8 5/8'' Wave Brake Disc & Recessed Hub,
1'' Bore................................................................................$194.95
08-325A Ultra-Lite 8 5/8'' Wave Brake Disc & Recessed Hub,
1 1/8'' Bore (Wahl Champ & Drag) ....................................$194.95
Wave Discs
08-412 Replacement Lightweight Wave Disc, 8” OD,
Polaris Bolt Pattern ............................................................$119.95
08-401 Replacement Lightweight Wave Disc, 8 5/8” OD,
Polaris Bolt Pattern ............................................................$119.95
Hubs
08-316 Wave Brake Hub, 1'' with 1/4'' Key, Polaris Bolt Pattern ......$63.75
08-320 Polaris Aluminum Hub, 1” Bore, 1/4” Key ............................$42.00
08-321 Wahl Steel Brake Hub, 1'' ID with 1/4'' Key ..........................$67.50
08-319 Wahl Steel Brake Hub, 1 1/8'' ID with 1/4'' Key, (Champ) ....$67.50
Key
08-309…...Hardened 1/4" Woodruff Key ................................................$3.35
08-160A...Kelsey Hayes Drive Shaft Caliper Assy, Outer ..................$145.00
08-162A...Kelsey Hayes Drive Shaft Caliper Assy, Inner ..................$145.00
08-154.....Kelsey Hayes Caliper, Flush Mount, Piston Side (outer) ....$85.00
08-152.....Kelsey Hayes Caliper, Piston Side Only, (inner) ..................$65.00
08-227.....Kelsey Hayes Brake Pad, Side Load, ea. ............................$22.95
Kelsey Hayes
Dual Caliper
Dual caliper setups are the same as
what is used on the Wahl Bros.
Dragsters. The outer calipers are flush
mounting to allow the piston to pass through the side of the
bulkhead and tunnel. Piston size is 1 5/8”. Mounting holes
are on 2 5/16” centers.
SLP Ultra-Lite
Wave Brake Disc Assy
TM
08-156A...Kelsey Hayes Dual Caliper, w/Pads, Fittings & Fasteners $205.00
08-152.....Kelsey Hayes Caliper, Piston Side Only, (inner) ..................$65.00
08-154.....Kelsey Hayes Caliper, Flush Mount, Piston Side (outer) ....$85.00
08-227.....Kelsey Hayes Brake Pad, ea. ..............................................$22.95
The new Wave design allows the lightest
possible weight, as well as maximum
cooling and more braking power than the
conventional. Rotating mass is a big
deal. For example, one pound of rotating mass is equal to 7
lbs. of stationary mass. Brake pads are listed below the disc
assembly. All are stock replacements.
Brake Discs and Hubs
Steel discs and hubs for trail or race use.
Ski-Doo
08-407... ..Ultra-Lite Wave Disc and Hub, (Save 1lb. 8oz)8 1/2” OD $189.95
08-413…..SLP Carbon/Kevlar Brake Pads, pr. ....................................$66.95
Polaris
08-408... ..Ultra-Lite Wave Disc and Hub, Splined, (Save 1lb. 10oz)
7 15/16” OD ........................................................................$199.95
Arctic Cat
08-409... ..Ultra-Lite Wave Disc and Hub, (Save 1lb. 8oz)
8 11/16” OD ........................................................................$189.95
08-416…..SLP Carbon/Kevlar Brake Pad, Wilwood Caliper, pr. ..........$66.95
Yamaha
08-411... ..Ultra-Lite Wave Disc and Hub, (Save 2lb.) 8 11/16” OD ..$189.95
08-418…..SLP Brake Pad, VMax & VMax 4 through '96, pr. ..............$66.95
08-417…..SLP Brake Pad, ‘97-’04 & ‘02-’06 Viper, pr. ........................$66.95
08-312…..Polaris Disc w/Hub, Splined, 8” OD ....................................$75.60
08-313…..Polaris Disc w/Hub, .230” thick, Vented, Splined, 8” OD ....$92.95
08-298…..Steel Disc w/Hub, 6” x .187”, 1” Bore, 1/4" Key ..................$54.95
08-308A…Wahl Dragster Steel Disc with Hub, 8 1/4" OD..................$114.95
08-315A…Stainless Steel Disc with Hub, 8'' OD, 1'' Bore, 1/4” Key ..$114.95
Brake Discs
08-302….Arctic Steel Disc, for early Wahl Dragsters &
Most Arctic's thru-'91, 8 1/4" OD ..........................................$59.25
08-403….Stainless Steel Brake Disc, 8'', 2.465'' ID,
4 hole pattern on 2 15/16” centers ......................................$69.95
59
BRAKING
Kelsey Hayes Caliper
BRAKING
Braking
Order Line 800-883-0294
SLP High Performance
Carbon/Kevlar Brake Pads
SLP High Performance
Brake Lines
Recommended for use on the SLP UltraLite Wave Brake Rotor, these brake pads are made from a
Carbon/Kevlar GG-rated compound developed especially for
snowmobiles. The special composition is a fade free material
that is excellent for wet or dry conditions. Excellent for trail
and race conditions.
These SLP brake lines are manufactured from the highest quality materials for no compromise in performance. Teflon core, braided stainless
steel cover with a PVC outer sheath. Lines are lightweight
and flexible with a burst strength of 12,000#. Less hand effort
required with up to 70% less expansion for better braking
power to the caliper. Specified hoses are longer than stock to
allow for taller bar positions.
08-413…..Ski-Doo SLP Brake Pad, Hydraulic Disc Brakes ................$66.95
08-416.….Arctic Cat SLP Brake Pad, Wilwood Caliper ......................$66.95
08-417.….Yamaha SLP Brake Pad, Yamaha '97-’04 and ‘02-’06 Viper$66.95
08-418…..Yamaha SLP Brake Pad, Vmax & V-Max 4 through '96 ......$66.95
Arctic Cat
08-211.....Arctic Cat Brake Line, 34”, '94-'05 ........................................$56.00
08-212.....Arctic Cat Brake Line, 40”, ‘94-’05 ......................................$65.00
Ski-Doo
08-214.....Ski-Doo Brake Line, 31”, F2000, S2000, CK3 & ZX Chassis$69.50
08-207.....Ski-Doo Brake Line, 40” REV ..............................................$65.00
Polaris
08-215.....Polaris Brake Line, 34”, All except ProX & IQ ......................$50.25
08-216.....Polaris Brake Line, 38”, All except ProX & IQ ......................$54.50
08-209.....Polaris Brake Line, 36”, ProX ..............................................$56.00
Yamaha - '97 to Present
08-217.....Yamaha Brake Line, 31”, ‘97-’04, SX, Viper, V-Max ............$59.95
08-218.....Yamaha Brake Line, 36”, ‘97-’04, SX, Viper, V-Max ..........$64.95
08-219.....Yamaha Brake Line, 40”, RX-1 (longer) ..............................$64.95
BRAKING Brake Pads
BRAKING Brake Pads are made of a
unique organic base material, including a combination of kevlar and carbon
fiber. This long lasting compound keeps temperatures down
and is gentle on disks.
08-420…..Arctic Brake Pads, Wilwood Caliper, BRAKING, pr. ............$36.95
OEM Brake Pads
All brake pads are of OEM quality or better; not the soft aftermarket type. Sold individually or by the pair.
08-228
Brake Lines & Fittings
08-230
08-420
Stainless Steel hoses come in 26”, 36”
and 38” lengths. Other lengths can be
made upon request. When ordering
Nylon hose, order ends separately and
specify the length of hose desired. All
ends are 1/8” male pipe thread except the 38” hose. The 38”
Wahl Champ hose connects directly to the Arctic/Wilwood
Master cylinder and has 1/8” NPT on caliper end.
08-233
08-173
Arctic
08-228.....Arctic Pad, 1 5/8” OD with Flat, OEM 0109-471, ea. ..........$10.30
08-230.....Arctic Pad, 15/16” x 1 7/16” Rect., OEM 0115-643, ea. ........$7.65
Arctic/Wilwood
08-420.....Arctic/Wilwood Pad, BRAKING, pr. ......................................$36.95
08-173.....Wilwood Brake Pad, Billet Spot Caliper & 175 Airheart, pr. $18.95
08-233…..Wilwood Brake Pad, Billet Caliper, pr. ................................$34.95
Stainless Steel
08-200…..Stainless Steel Hose, 26” ....................................................$34.95
08-202…..Stainless Steel Hose, 36” ....................................................$39.95
08-221…..Stainless Steel Hose, Wahl Champ, 38” ..............................$52.95
08-203…..Custom Length Stainless Steel Hose
(Price per inch, includes ends) ..............................................$1.25
Nylon
08-204…..Nylon Hose (Price per foot) ..................................................$1.50
08-206…..Straight Fitting (for Nylon hose) ............................................$4.95
08-208…..90 degree Fitting (for Nylon hose) ........................................$5.25
08-188.....T-Fitting (for 1/4'' nylon hose) ..............................................$12.60
Connector
08-210…..Adapts 3/8”-24 thread in large Kelsey Hayes
Caliper to 1/8” pipe ................................................................$8.95
08-245
08-236
08-246
Polaris
08-236.....Polaris Top Load, Lightweight, OEM 2201429, pr. ..............$87.35
08-246.....Polaris Top Load, Heavy Duty, OEM 2201430, pr. ..............$87.35
08-245.....Polaris/Hayes Brake Pad, '02-'04 Pro X 440 &
All ‘04-’05 Polaris, pr.............................................................$87.35
08-227.....KH Pad, Polaris Side Load & Wahl, OEM 1930569, ea.......$22.95
08-224
08-227
08-244
Kelsey Hayes
08-224.....KH Pad, Piston Side, 1 5/8” OD, OEM 0109-434, ea. ........$12.95
08-226.....KH Pad, Carrier Side, 1 5/8” OD, OEM 0109-433, ea. ..........$9.95
08-227.....KH Pad, Polaris Side Load & Wahl, OEM 1930569, ea.......$22.95
MCP/Enginetics
08-244.....MCP and Enginetics Brake Pad, Hard, ea. ..........................$22.00
60
Oil, Lube & Cleaners
Order Line 800-883-0294
Oil, Lube &
Cleaners
Klotz
TC-W3 Techniplate
Klotz TC-W3 Techniplate has greater film
strength than standard lubricants.
Approved by the NMMA and engine
manufacturers, it is a carbon-free and smokeless environmentally
safe formula. Available in quarts (10 per case) or gallons (4 per
case).
Red Line
Snowmobile Oil
09-110.....Klotz TC-W3 Techniplate, Quart, KL-215..............................$11.95
09-112.....Klotz TC-W3 Techniplate, Gallon, KL-216 ............................$45.75
09-113.....Klotz TC-W3 Techniplate, Gallon, KL-216, Case................$183.00
R-50 Synthetic Lubricant
R-50 offers the protection of BeNol oil with the clean burn of
synthetics. Available in 16oz. and quart bottles (10 per case)
or gallon bottles (4 per case). Sold individually.
09-120.....Klotz R-50 Synthetic Lubricant, 16 oz., KL-102 ....................$7.70
09-122.....Klotz R-50 Synthetic Lubricant, Quart, KL-104 ....................$13.35
09-124.....Klotz R-50 Synthetic Lubricant, Gallon, KL-105 ..................$50.90
SnowX 4 Techniplate 5W/40
Klotz Snow X 4 Synthetic lubricant is designed
for use in today's 4-stroke snowmobiles.
Exceeds warranty requirements of all leading
manufacturers. Snow X 4 is specially formulated for cold starting flow, thermal stability and
reduced friction, providing less drag… More
Power.
09-350.....Red Line Snowmobile Oil, Gallon ........................................$45.95
09-352.....Red Line Snowmobile Oil, Case ........................................$183.75
Red Line Two-Stroke
Racing Oil
09-132…..Klotz SnowX 4 Techniplate, Quart, KL-805..........................$11.95
Red Line Oil provides the best high-temperature protection from ring sticking and
scuffing and produces up to 5% more
power. It has shown up to 75% less wear
than premium castor-based lubricants, and is exceptionally
clean. A high performance synthetic designed to provide
maximum power. Can be used as pre-mix or as an injection
oil in milder conditions. This oil is used by Four Time World
Champions, Wahl Bros. Racing. Sold individually or by the
case.
16 oz.
09-359.....Red
09-361.....Red
Gallons
09-360.....Red
09-362.....Red
Two-Cycle Alcohol Premix
Contains the same lubricating properties as the
Red Line Two-Stroke Racing Oil, but does not
contain the detergents needed for gasoline
engine cleanliness. This is also an excellent
product for model engines that use alcohol/nitro
fuels. This oil provides excellent cleanliness and wear protection. Read label before using. Sold in qts.
Line Racing Oil, 16 oz ....................................................$9.45
Line Racing Oil, 16 oz., Case (12)..............................$113.75
09-365…..Two Cycle Alcohol Premix, qt. ............................................$15.95
Line Racing Oil, Gallon ................................................$66.95
Line Racing Oil, Gallon, Case (4) ..............................$267.50
Energy Release Metal
Conditioner
PJ1 Goldfire Premix Oil
The first true anti-friction metal conditioner, ER treats the metal not the
lubricant. ER forms smooth surfaces
at heat and friction points, dramatically reducing friction and wear between moving metal parts.
Apply directly to gears, chains, bearings, and crankcases or
directly to your transmission or motor oil. Great additive for
your chain case!
This premium petroleum/synthetic blend is clean
burning with no carbon buildup, and stops plug
fouling. Available in .5 Liter bottles (6 per case).
09-300…..PJ 1 Oil, .5 Liter, ea. ..............................................................$9.95
09-302…..PJ 1 Oil, .5 Liter Case (6) ....................................................$58.95
09-420…..Energy Release, 5 oz ............................................................$9.99
09-422…..Energy Release, 16 oz ........................................................$24.99
09-424…..Energy Release, gal. ........................................................$169.00
61
OIL, LUBE & CLEANERS
A high performance all-synthetic formula
used as injection or premix oil. The slipperiness of Red Line Oil not only eliminates
build up on exhaust valves, but can produce up to 3% more power and can provide significantly longer bearing life. With
lower ash deposit control it provides less smoke, cleaner
spark plugs and cleaner pistons. Combined with anti-scuff
additives it prevents ring sticking and scuffing under extreme
temperatures. Recommended for stock to moderately modified snowmobiles. Compatible with petroleum based and synthetic oil. Sold by the gallon or case (4 gallons per case).
OIL, LUBE & CLEANERS
Oil, Lube & Cleaners
Order Line 800-883-0294
Octane Booster
BeNol
One ounce per gallon of gas increases octane
level 2.5 points. Eliminates detonation and preignition. Available in 16 ounce cans (10 per case).
Sold individually.
Klotz “Bean” racing castor oil is degummed and
extra fortified to blend with methanol alcohol and
gasoline. Available in 12 ounce bottles (10 per
case). Sold individually.
09-140…..Klotz Octane Booster, 16 oz., KL-602 ................................$10.75
09-130…..Klotz BeNol, 12 oz., BC-175 ..................................................$7.75
Nitro Racing Additive
Chaincase Lube
A custom blended nitro additive developed for gas
or alcohol. Dyno tests show a power increase of
up to 15%. Contains ”Koolinal” to reduce heat and
pre-ignition. Available in 16 ounce cans (10 per
case). Sold individually.
Klotz chain lube contains graphite providing super lubrication,
also includes extra tackiness agent. The Polaris synthetic
chaincase lube provides excellent wear protection while
being very fluid.
09-150…..Klotz Nitro Racing Additive, 16 oz., KL-600 ........................$12.55
PJ1 and Maxima
Chain Lube
09-160….Klotz Chain Lube, 12 oz., KL-500 ..........................................$9.25
09-161.....Polaris Premium Synthetic Chaincase Lube, 1 qt. ..............$12.95
Red Line Assembly Lube
Red Line Assembly Lube provides threetimes greater film-strength than conventional black Molybdenum Disulfide greases and will not clog oil filters. This product
clings to all surfaces and is an excellent
rust inhibitor, allowing the storage of parts for years. A thin
film of protection is all that is required on mating parts. Great
for the many frequently removed parts on your sled.
Specially formulated not to fly off. These
thin-bodied lubricants quickly cover the
chain links, and then thicken to provide
an exceptionally strong film, which lubricates and protects
critical chain wear points.
PJ 1
09-310…..PJ1 Chain Lube, 8 oz. ..........................................................$6.90
09-314…..PJ1 Chain Lube, 18 oz.........................................................$11.95
Maxima
09-315…..Maxima Chain Guard, 20 oz. ................................................$8.95
09-374…..Assembly Lube, 1/2 oz. ........................................................$2.95
09-375…..Assembly Lube, 4 oz. ............................................................$7.95
09-376…..Assembly Lube, 16 oz. ........................................................$24.95
Energy Release
Cleaning & Lubricating
Products
Red Line CV-2 Grease
Red Line synthetic CV-2 Grease possesses a very
high melting point and has superior antiwear under
extreme loads. CV-2 contains an organic moly and
is for wheel bearings, CV joints and any high-temperature, high-speed uses.
Quality products from Energy
Release. The Engine Degreaser is safe to use on painted
surface and plastics. ER Clear Grease in a spray can is nonwater soluble with ER providing excellent protection against
moisture, extreme temperatures and galling. The ER AllPurpose Penetrating Lube provides the residual metal conditioning benefits of Energy Release concentrate. Applying this
lube inside your track greatly reduces friction.
09-377…..Red Line CV-2 Grease with Moly, 14oz. Tube ....................$11.95
Amsoil Interceptor & Dominator
Synthetic 2-Cycle Oil
Interceptor is engineered especially
for power sports applications and
engines equipped with exhaust
power valves. Controls exhaust valve sticking and provides
outstanding overall lubrication properties. Dominator Oil is
the premiere racing two-cycle oil for high horsepower modified racing or trail motors. Contains higher viscosity oils for
best overall protection and additives for higher operating temperatures. Injector use or 50:1 premix.
09-430…..Clear Gear & Chain Grease, 16 oz. ......................................$6.25
09-432…..ER Citrus Degreaser, 18 oz. ..................................................$3.95
09-433…..ER Penetrating Lube, 16 oz...................................................$5.95
Energy Release Grease
Energy Release offers premium grease
in lithium & synthetic formulas. Both offer
the added protection that ER offers. The
G-100 lithium grease has a temperature
range up to 400 F and the G-200 synthetic ranges to 550 F.
Recommended for any racing application.
Interceptor Synthetic Oil
09-439…..Interceptor Synthetic 2-Cycle Oil, Qt. ....................................$9.95
09-440…..Interceptor Synthetic 2-Cycle Oil, Qt., Case (12) ..............$118.20
09-441…..Interceptor Synthetic 2-Cycle Oil, Gal. ................................$39.00
09-442…..Interceptor Synthetic 2-Cycle Oil, Gal, Case (4)................$154.40
Dominator Synthetic Oil
09-443…..Dominator Synthetic 2-Cycle Oil, Qt. ..................................$10.15
09-444…..Dominator Synthetic 2-Cycle Oil, Qt., Case (12) ..............$120.60
Cartridges
09-426.....G-100
09-427.....G-200
Tubs
09-428.....G-100
09-429.....G-200
62
Lithium Grease cartridge, 14.5 oz. ..............................$7.99
Synthetic Grease Cartridge, 14.5 oz. ..........................$7.99
Lithium Grease Tub, 16 oz. ........................................$8.45
Synthetic Grease Tub, 16 oz.......................................$8.45
Oil, Lube & Cleaners/Cooling
Order Line 800-883-0294
Uplon Fuel Lube
Heavy Duty Plastic
Siphon Pump
Provides upper cylinder & fuel pump lubrication.
Protects the induction & fuel delivery system from
the dry, abrasive properties of methanol alcohol.
Reduces power robbing friction. (10 per case.)
Quick action polyethylene pump
that pumps to higher levels and
siphons to lower levels. Air-vent
controls siphoning action. Fits 2” bung openings in 15, 30
and 55 gallon drums. Easily empties or fills gasoline, antifreeze and light oils.
09-162.....Uplon, Fuel Lube, Quart, KL-107..........................................$11.90
Fitch Fuel Catalyst ..............................
MuddOff
MuddOff is a specially formulated release
agent designed for the serious racer. A PreRace treatment prevents mud, dirt and oil from
sticking to your machine. Just hose it off- no
scrubbing needed making cleanup fast and
easy. MuddOff also contains a highly advanced rust inhibitor.
09-400…..Fitch Fuel Catalyst, 2 per pack ............................................$46.25
Red Line “Water Wetter”
09-436…..MuddOff, 22 oz. Spray Bottle ................................................$5.99
09-438…..MuddOff, 1 qt. Concentrate....................................................$9.99
“Water Wetter” doubles the wetting ability of
water greatly improving heat transfer. This
means lower coolant temperatures and
improved performances. Prevents foaming and
also contains rust and corrosion inhibitor. The
12-ounce container treats 4 gallons of coolant.
Case quantity is 12.
Cooling
Aluminum Radiator
09-370.....Red Line Water Wetter, 12 oz., ea. ........................................$9.95
09-369.....Red Line Water Wetter, 12 oz., Case, 12 pc. ....................$119.40
Available for oval and drag racing. The Oval radiator is 20”
long, 7” high x 2 3/4” thick. Outlets are 1” and 1 1/4” mounting tabs are on each end. The drag radiator is 16” wide x 3”
high x 2 3/4” thick and has 1” outlets on each end.
Wilwood Brake Fluid
Wilwood Hi-Temp 570 racing brake fluid is an
extremely high performance formula that combines low viscosity and low compressibility for
firm, quick brake response.
Radiators
10-011.....Aluminum Radiator, Drag, 16” x 3” ....................................$225.00
10-020.....Aluminum Radiator, Oval, 20” x 7” ....................................$285.00
Mounts
10-028.....Rubber Mount, 1/4”-20 Thread, 1” OD, 1/2” thick, ea. ..........$2.65
10-029.....Rubber Mount, 1/4”-20 Thread, 1” OD, 3/4” thick, ea. ..........$2.65
09-202…..Wilwood Brake Fluid, 12oz. ..................................................$5.95
Maxima ShockFluid
For all gas charged shocks, this fluid contains
anti-foam, anti-wear and oxidation stable additives to reduce fluid contamination. Premium
seal conditioners prevent leakage and shaft
friction. Sold individually in 1 Liter bottles (12 per case).
Vintage Aluminum
Radiator
09-210…..Maxima Shock Fluid, Light, 3 wt. ........................................$12.35
09-211…..Maxima Shock Fluid, 5 wt. ..................................................$12.35
Replacement radiators sized for the
Arctic Z, Polaris RXL and the Ski-Doo Sno Pro machines.
Also works in many other applications. The double core
aluminum radiator is 2 3/4” thick.
Mixing Cup
Made from durable, translucent
polypropylene plastic. Measuring
cups ensure perfect ratio every time.
Calibrated in cc’s and ounces.
10-021.....Aluminum Radiator, 5 1/2”x 16”, 3/4” outlets
(Arctic Z and Polaris RXL) ................................................$255.00
10-022.....Aluminum Radiator, 6” x 17 1/2”,1” Outlets
(’78-’82 Ski-Doo) ................................................................$265.00
09-170…..Ratio Rite w/Lid, 18oz., 16:1 to 70:1......................................$8.75
09-171…..Maxima Quick 2 Mix, 20oz., 24:1 to 100:1 ............................$4.50
09-172…..Accu-Mix Measuring Bottle, 32 oz., 24:1 to 100:1 ................$5.25
63
OIL, LUBE & CLEANERS/COOLING
09-090.....Heavy Duty Plastic Siphon Pump, ea. ................................$21.85
Easy to use “Drop-in” unit improves fuel economy and increases power, while reducing
emissions. The use of a Fitch results in cleaner
engine oil, reduced carbon build up in the
engine, easier starting, reduced maintenance,
and prolonged engine life. Works great in all 2stroke applications. Sold in packs of two.
Cooling
Order Line 800-883-0294
Heat Exchanger Material
Compact Heat Gauge,
1/4” NPT
The same aluminum heat exchanger material used on Wahl Bros. oval racing
machines.
Stainless steel gauge installs directly into
a surge tank or our In-Line Heat Gauge Adaptor. Features a
2” dial that reads 0-200 degrees Fahrenheit. 2 1/2” probe
length. 1/4” NPT male connection. Works great with the InLine Heat Gauge Adaptor. Enabling you to connect the heat
gauge into your 1” ID coolant hose. Do not Solid Mount.
10-009.....Heat Exchanger Material, 5/8'' x 6 11/16'', ft. ......................$15.60
Aluminum Surge Tank
The aluminum surge tank has 1” outlets and a
small filler neck. Tank size is 2 1/2” OD and 5”
tall. Caps are available in 13 lb. And 22 lb.
versions. Sold separately.
10-460…..Compact Heat Gauge, 1/4” NPT..........................................$49.95
10-470…..In-Line Heat Gauge Adaptor, 1/4” NPT................................$24.00
Drain Thing
Allows easy draining of your engine coolant.
Install in a lower hose to drain engine. A small
hose can be put on petcock to route fluids.
10-248…..Aluminum Surge Tank, 1” Outlets ........................................$89.95
10-252…..Filler Neck Cap, Small, 13 lb. ............................................$11.95
10-251…..Filler Neck Cap, Small, 22 lb. ..............................................$18.95
Filler Neck and Cap
10-253.....Drain Thing, 3/4" ..................................................................$32.95
10-247.....Drain Thing, 1''......................................................................$32.95
This filler neck can be attached by bolting
to the molded ear, or just left afloat with the
hose. Has 1” outlets and a 1/4” overflow
nipple. Sold separately.
Quick Couplers
For use in cooling systems, these disconnects are the lightest you’ll find.
Available in 1/2” and 3/4”. Sold as one
set.
COOLING
10-250…..Filler Neck ............................................................................$14.95
10-252…..Filler Neck Cap, Small, 13 lb. ..............................................$11.95
10-251…..Filler Neck Cap, Small, 22 lb. ..............................................$18.95
Brass Filler Neck
Quick Couplers
10-302A...Plastic Quick Coupler, 1/2” ID Hose ....................................$29.95
10-304A...Plastic Quick Coupler, 3/4” ID Hose ....................................$29.95
Reducer and O-Rings
10-306.....Aluminum Hose Reducer, 1” to 3/4” ......................................$9.95
10-310.....Replacement O-Ring, Quick Coupler ....................................$1.00
Brass filler necks allow you to build your
own surge tanks or make needed repairs.
Can be soldered on or crimped on.
10-254…..Brass Filler Neck, Small ........................................................$9.95
10-255…..Brass Filler Neck, Large ........................................................$9.95
10-252…..Filler Neck Cap, Small, 13 lb. ..............................................$11.95
10-249…..Filler Neck Cap, Large, 13 lb ..............................................$10.50
Nylon Hose
Connectors
Aluminum Filler Neck
These black nylon fittings have a single barb for a tight seal. Temperature range is to -60 degrees
Fahrenheit. Available in a straight connector, reducer or a 90
degree fitting in 3/4" or 1”.
Weld on billet aluminum filler necks are
available in standard size or small.
Straight
10-311.....Nylon Hose Connector, 3/4" ..................................................$3.95
10-312.....Nylon Hose Connector, 1” ......................................................$3.95
Reducer
10-313.....Nylon Reducer, 1” to 3/4" ......................................................$3.95
90 Degree
10-314.....Nylon Elbow Connector, 3/4"..................................................$3.95
10-315.....Nylon Elbow Connector, 1” ....................................................$3.95
10-256A...Billet Aluminum Filler Neck, Small ......................................$24.95
10-257A...Billet Aluminum Filler Neck, Standard ..................................$24.95
10-252…..Filler Neck Cap, Small, 13 lb. ..............................................$11.95
10-251…..Filler Neck Cap, Small, 22 lb. ..............................................$18.95
10-249…..Filler Neck Cap, Large ........................................................$10.50
10-258.....Brass Hose Fitting, 1/4'' Barb x 1/8'' NPT, Male ....................$1.95
VDO Mechanical Temp Gauge
Red Line “Water Wetter”
Gauge diameter is 2 1/16” and reads from
120 to 260 degrees, a 48” capillary tube
and an array of adaptors and mounts are
included. The 3/8”-18 NPT adaptor is
included, but is also sold separately.
“Water Wetter” doubles the wetting ability of
water greatly improving heat transfer. This
means lower coolant temperatures and improved
performances. Prevents foaming and also contains rust and corrosion inhibitor. The 12 ounce
container treats 4 gallons of coolant.
10-400…..VDO Mechanical Heat Gauge ............................................$69.95
10-402…..Heat Gauge Adaptor, 3/8”-18 NPT ......................................$14.00
10-401…..In-Line Heat Gauge Adaptor, 1/2” NPT................................$26.00
09-370.....Red Line Water Wetter, 12 oz., ea. ........................................$9.95
09-369.....Red Line Water Wetter, 12 oz., Case, 12 ..........................$119.40
64
Cooling/Chassis Components
Order Line 800-883-0294
Hose Clamps
Cherry Rivets
A narrow 5/16” wide stainless steel clamp
with stainless steel screw.
These rivets have approximately double
the shear and tensile strength of a standard steel pop rivet. For chassis work,
these are the best choice. Once set, part of the splined steel
mandrel stays inside the rivet for added strength. Also known
as Cherry or Q-rivets. Package quantities are 25 and 100.
Three different lengths are available.
10-321.....Stainless
10-322.....Stainless
10-323.....Stainless
10-324.....Stainless
Steel
Steel
Steel
Steel
Clamp,
Clamp,
Clamp,
Clamp,
1/2” to 7/8”, ea. ....................................$.90
9/16” to 1 1/16”, ea. ..........................$1.10
11/16” to 1 1/4”, ea. ..........................$1.10
15/16” to 1 1/2”, ea. ..........................$1.25
Chassis
Components
High Strength Blind Rivet, 3/16”, (.1875” OD)
14-446... ..H.S Rivet, .062” - .125” Grip Range, .325”
14-447... ..H.S Rivet, .062” - .125” Grip Range, .325”
14-448... ..H.S Rivet, .126” - .250” Grip Range, .450”
14-449... ..H.S Rivet, .126” - .250” Grip Range, .450”
14-450... ..H.S Rivet, .251” - .375” Grip Range, .575”
14-451... ..H.S Rivet, .251” - .375” Grip Range, .575”
POP Rivets
Champ Footrests
long,
long,
long,
long,
long,
long,
25 pc.........$8.00
100 pc.....$28.00
25 pc.........$8.00
100 pc.....$28.00
25 pc.........$8.00
100 pc.....$28.00
Standard Steel Blind rivets have a steel
rivet and mandrel, while the aluminum
rivet has an aluminum mandrel. Available
in a standard diameter domed head and also a large flange
diameter. The 1/8” large flange rivet has a .390” OD and the
3/16” rivet has a .650” OD. Package quantities are 25 and
100 pc.
A must for any Oval racer, these foot
rests allow you to comfortably round
the extremely fast corners of the oval
circuits. Used and designed by Wahl
Bros. Race Team.
Steel Pop Rivet, 1/8”, (.125”)
14-340... ..Steel Rivet, .032” - .062”
14-341... ..Steel Rivet, .032” - .062”
14-342... ..Steel Rivet, .063” - .125”
14-343... ..Steel Rivet, .063” - .125”
14-344... ..Steel Rivet, .126” - .187”
14-345... ..Steel Rivet, .126” - .187”
Steel Pop Rivet, 5/32”, (.156”)
14-380... ..Steel Rivet, .063” - .125”
14-381... ..Steel Rivet, .063” - .125”
14-382... ..Steel Rivet, .126” - .187”
14-383... ..Steel Rivet, .126” - .187”
14-384... ..Steel Rivet, .188” - .250”
14-385... ..Steel Rivet, .188” - .250”
Steel Pop Rivet, 3/16”, (.1875”)
14-400... ..Steel Rivet, .063” - .125”
14-401... ..Steel Rivet, .063” - .125”
14-402... ..Steel Rivet, .126” - .250”
14-403... ..Steel Rivet, .126” - .250”
14-404... ..Steel Rivet, .251” - .375”
14-405... ..Steel Rivet, .251” - .375”
Foot Pegs
Place at the rear of your running boards
to provide toe traction for an easier, better hole shot. Sold as a pair.
13-250…..Foot Pegs, pr. ....................................................................$24.00
Rear Close-Off Panels
Aluminum Rear Close Offs available in
one piece, .063” 6061-T6 or in 3-piece
rivet together models.
02-468.....Polaris IQ Close Off, 1 pc.....................................................$60.00
02-466.....Polaris Rear Close Off, Pre Edge, 1 pc. ..............................$60.00
02-459.....Polaris Edge & Ski-Doo REV Rear Close Off, 1 pc. ............$60.00
02-467.....Ski-Doo Rear Close Off, 16 3/8” Wide, 1 pc. ......................$60.00
02-469.....Polaris Rear Close Off, Edge, 3 pc. ....................................$60.00
Aluminum Rivets
Tunnel Extension with
Close Off
The same extension used on Wahl
Bros. Drag Chassis. Made of .063” aluminum, they are 16 1/2” Wide, 14” Long & 9” tall.
02-461.....Tunnel Extension w/ Close Off ............................................$95.00
Snow Flap Material
This 2-ply snow flap material is 18 1/2”
wide and 3/16” thick. Both sides are rubber
backed. Priced per foot.
02-465…..Snow Flap Material (per ft) ....................................................$8.75
14-333.. ...Stainless Steel Lanyard, 6” Nylon coated, ea. ......................$3.25
14-334.. ...Stainless Steel Lanyard, 8” Nylon coated, ea. ......................$3.25
65
Grip
Grip
Grip
Grip
Grip
Grip
Range,
Range,
Range,
Range,
Range,
Range,
.212”
.212”
.250”
.250”
.313”
.313”
long,
long,
long,
long,
long,
long,
25 pc.......$1.50
100 pc.....$5.00
25 pc.......$1.50
100 pc.....$5.00
25 pc.......$1.50
100 pc.....$5.00
Grip
Grip
Grip
Grip
Grip
Grip
Range,
Range,
Range,
Range,
Range,
Range,
.275”
.275”
.338”
.338”
.400”
.400”
long,
long,
long,
long,
long,
long,
25 pc.......$2.00
100 pc.....$7.00
25 pc.......$2.00
100 pc.....$7.00
25 pc.......$2.00
100 pc.....$7.00
Grip
Grip
Grip
Grip
Grip
Grip
Range,
Range,
Range,
Range,
Range,
Range,
.300”
.300”
.425”
.425”
.550”
.550”
long,
long,
long,
long,
long,
long,
25 pc.......$3.00
100 pc...$10.50
25 pc.......$3.00
100 pc...$10.50
25 pc.......$3.00
100 pc...$10.50
Aluminum Pop Rivet, 1/8” (.125”)
14-350... ..Alum. Rivet, .032” - .062” Grip Range, .212” long, 25 pc. ....$2.00
14-351... ..Alum. Rivet, .032” - .062” Grip Range, .212” long, 100 pc. ..$7.00
14-352... ..Alum. Rivet, .063” - .125” Grip Range, .250” long, 25 pc. ....$2.00
14-353... ..Alum. Rivet, .063” - .125” Grip Range, .250” long, 100 pc. ..$7.00
14-354... ..Alum. Rivet, .126” - .187” Grip Range, .313” long, 25 pc. ....$2.00
14-355... ..Alum. Rivet, .126” - .187” Grip Range, .313” long, 100 pc. ..$7.00
Aluminum Pop Rivet, 5/32” (.156”)
14-390... ..Alum. Rivet, .063” - .125” Grip Range, .275” long, 25 pc. ....$2.25
14-391... ..Alum. Rivet, .063” - .125” Grip Range, .275” long, 100 pc. ..$8.00
14-392... ..Alum. Rivet, .126” - .187” Grip Range, .338” long, 25 pc. ....$2.25
14-393... ..Alum. Rivet, .126” - .187” Grip Range, .338” long, 100 pc. ..$8.00
14-394... ..Alum. Rivet, .188” - .250” Grip Range, .400” long, 25 pc. ....$2.25
14-395... ..Alum. Rivet, .188” - .250” Grip Range, .400” long, 100 pc. ..$8.00
Aluminum Pop Rivet, 3/16” (.1875”)
14-410... ..Alum. Rivet, .063” - .125” Grip Range, .300” long, 25 pc. ....$3.00
14-411... ..Alum. Rivet, .063” - .125” Grip Range, .300” long, 100 pc. $10.50
14-412... ..Alum. Rivet, .126” - .250” Grip Range, .425” long, 25 pc. ....$3.00
14-413... ..Alum. Rivet, .126” - .250” Grip Range, .425” long, 100 pc. $10.50
14-414... ..Alum. Rivet, .251” - .375” Grip Range, .550” long, 25 pc. ....$3.00
14-415... ..Alum. Rivet, .251” - .375” Grip Range, .550” long, 100 pc. $10.50
COOLING/CHASSIS COMPONENTS
Steel Rivets
13-259.....Champ Footrest, RH, ‘06-Present Wahl Champ, 17” Long....$135.00
13-260.....Champ Footrest, RH, 12” Long (original) ..........................$135.00
13-270.....Triangle Footrest, LH ............................................................$16.00
Chassis Components
Order Line 800-883-0294
Large Flange Steel Rivet
Steel Pop Rivet, Large Flange, 1/8”, (.125”)
14-360... ..Flange Rivet, .063” - .125” Grip Range,
14-361... ..Flange Rivet, .063” - .125” Grip Range,
14-362... ..Flange Rivet, .126” - .187” Grip Range,
14-363... ..Flange Rivet, .126” - .187” Grip Range,
14-364... ..Flange Rivet, .188” - .250” Grip Range,
14-365... ..Flange Rivet, .188” - .250” Grip Range,
Steel Pop Rivet, Large Flange, 3/16”, (.1875”)
14-420... ..Flange Rivet, .126” - .250” Grip Range,
14-421... ..Flange Rivet, .126” - .250” Grip Range,
14-422... ..Flange Rivet, .251” - .375” Grip Range,
14-423... ..Flange Rivet, .251” - .375” Grip Range,
14-424... ..Flange Rivet, .376” - .500” Grip Range,
14-425... ..Flange Rivet, .376” - .500” Grip Range,
14-426... ..Flange Rivet, .501” - .625” Grip Range,
14-427... ..Flange Rivet, .501” - .625” Grip Range,
14-428... ..Flange Rivet, .626” - .750” Grip Range,
14-429... ..Flange Rivet, .626” - .750” Grip Range,
.250”
.250”
.313”
.313”
.375”
.375”
long,
long,
long,
long,
long,
long,
25 pc.......$2.50
100 pc.....$8.50
25 pc.......$2.50
100 pc.....$8.50
25 pc.......$2.50
100 pc.....$8.50
.450”
.450”
.575”
.575”
.700”
.700”
.825”
.825”
.950”
.950”
long,
long,
long,
long,
long,
long,
long,
long,
long,
long,
25 pc.......$4.25
100 pc...$15.00
25 pc.......$4.25
100 pc...$15.00
25 pc.......$4.25
100 pc...$15.00
25 pc.......$6.00
100 pc...$22.00
25 pc.......$6.00
100 pc...$22.00
long,
long,
long,
long,
25 pc.......$2.50
100 pc.....$8.00
25 pc.......$2.50
100 pc.....$8.50
long,
long,
long,
long,
long,
long,
long,
long,
long,
long,
25 pc.......$4.50
100 pc...$16.00
25 pc.......$4.50
100 pc...$16.00
25 pc.......$4.50
100 pc...$16.00
25 pc.......$5.00
100 pc...$16.75
25 pc.......$5.00
100 pc ..$16.75
Large Flange Aluminum Rivet
Aluminum Pop Rivet, Large Flange, 1/8”, (.125”)
14-370... ..Flange Rivet, .063” - .125” Grip Range, .250”
14-371... ..Flange Rivet, .063” - .125” Grip Range, .250”
14-374... ..Flange Rivet, .188” - .250” Grip Range, .375”
14-375... ..Flange Rivet, .188” - .250” Grip Range, .375”
Aluminum Pop Rivet, Large Flange, 3/16”, (.1875”)
14-430... ..Flange Rivet, .126” - .250” Grip Range, .450”
14-431... ..Flange Rivet, .126” - .250” Grip Range, .450”
14-432... ..Flange Rivet, .251” - .375” Grip Range, .575”
14-433... ..Flange Rivet, .251” - .375” Grip Range, .575”
14-434... ..Flange Rivet, .376” - .500” Grip Range, .700”
14-435... ..Flange Rivet, .376” - .500” Grip Range, .700”
14-436... ..Flange Rivet, .501” - .625” Grip Range, .825”
14-437... ..Flange Rivet, .501” - .625” Grip Range, .825”
14-438... ..Flange Rivet, .626” - .750” Grip Range, .950”
14-439... ..Flange Rivet, .626” - .750” Grip Range, .950”
Closed End Rivet, 5/32” (.156” OD)
14-470... Closed Rivet, .063” - .125” Grip
14-471... Closed Rivet, .063” - .125” Grip
14-472... Closed Rivet, .126” - .187” Grip
14-473... Closed Rivet, .126” - .187” Grip
14-474... Closed Rivet, .251” - .312” Grip
14-475... Closed Rivet, .251” - .312” Grip
Closed End Rivet, 3/16”, (.1875” OD)
14-480... Closed Rivet, .063” - .125” Grip
14-481... Closed Rivet, .063” - .125” Grip
14-482... Closed Rivet, .126” - .250” Grip
14-483... Closed Rivet, .126” - .250” Grip
14-484... Closed Rivet, .313” - .375” Grip
14-485... Closed Rivet, .313” - .375” Grip
CHASSIS COMPONENTS
Washer,
Washer,
Washer,
Washer,
long,
long,
long,
long,
long,
long,
25 pc. ......$3.75
100 pc. ..$13.50
25 pc. ......$3.75
100 pc. ..$14.50
25 pc. ......$4.50
100 pc. ..$17.00
Range,
Range,
Range,
Range,
Range,
Range,
.330”
.330”
.455”
.455”
.580”
.580”
long,
long,
long,
long,
long,
long,
25 pc. ......$5.50
100 pc. ..$20.00
25 pc ........$5.50
100 pc. ..$20.00
25 pc. ......$5.50
100 pc. ..$20.00
Available in 90 ft. and 180 ft., this
heavy duty duct tape is 2” wide and
is excellent for covering up air vents
or holding that hood together for just one more race!
Available in a variety of colors.
2” x 180'
11-520.....Red, 2” x 180’ ........................................................................$9.95
11-521.....Blue, 2” x 180' ........................................................................$9.95
11-522.....Black, 2” x 180’ ......................................................................$9.95
11-523.....Silver, 2” x 180’ ......................................................................$9.95
2” x 90'
11-524.....Red, 2” x 90' ..........................................................................$7.50
11-525.....Blue, 2” x 90’ ..........................................................................$7.50
11-526.....Black, 2” x 90' ........................................................................$7.50
11-527.....Silver, 2” x 90' ........................................................................$7.50
11-528.....Yellow, 2” x 90' ........................................................................$7.50
11-529.....White, 2” x 90' ........................................................................$7.50
11-530.....Orange, 2” x 90' ......................................................................$7.50
11-531.....Purple, 2” x 90’........................................................................$7.50
Non-Skid Tape
A quick and easy way to prevent slipping
and falling in and around the race trailer.
Works great on any surface that is clean
and dry. Available in rolls that are 2” x 10 ft. and 4” x 10 ft.
Washers to reinforce the backside
of your rivet to ensure a tight fit in applications where material may be thinner.
Rivet
Rivet
Rivet
Rivet
.315”
.315”
.377”
.377”
.502”
.502”
ISC Racers Duct Tape
Aluminum Rivet
Washers
14-336…..Aluminum
14-337…..Aluminum
14-338…..Aluminum
14-339…..Aluminum
Range,
Range,
Range,
Range,
Range,
Range,
1/8” ID x 3/8” OD, 100 pc. ............$2.60
5/32” ID x 3/8” OD, 100 pc. ..........$3.95
3/16” ID x 1/2” OD, 100 pc. ..........$5.20
1/4” ID x 1/2" OD, 100 pc. ............$5.85
11-533.....Non-Skid Tape, 2” x 10’ Roll ................................................$12.35
11-535.....Non-Skid Tape, 4” x 10’ Roll ................................................$23.50
Aluminum Heat Foil Tape
Closed End Blind Rivet
This dead soft aluminum foil tape has a
high performance acrylic adhesive system. 3.25 mil thickness with a removable
paper liner. Temperature ranges from -35
F to 300 F. Extremely conformable to
irregular surfaces. Perfect for snowmobile hoods and plastic
belly pan protection with aftermarket pipe installation.
This rivet has a special solid end that
is capable of sealing vapors and liquids. Once set, part of the mandrel
stays in the rivet for added strength.
This is an aluminum rivet with a steel mandrel. Strength is
approximately the same as a standard steel pop rivet.
Closed End Rivet, 1/8” (.125” OD)
14-460... Closed Rivet, .032” - .062”
14-461... Closed Rivet, .032” - .062”
14-462... Closed Rivet, .063” - .125”
14-463... Closed Rivet, .063” - .125”
14-464... Closed Rivet, .126” - .187”
14-465... Closed Rivet, .126” - .187”
Grip
Grip
Grip
Grip
Grip
Grip
Range,
Range,
Range,
Range,
Range,
Range,
.237”
.237”
.301”
.301”
.362”
.362”
long,
long,
long,
long,
long,
long,
11-570.....Aluminum Heat Foil Tape, 3" x 25'........................................$12.95
11-572.....Aluminum Heat Foil Tape, 3" x 150'......................................$39.95
25 pc. ......$3.00
100 pc. ..$10.50
25 pc. ......$3.00
100 pc. ..$10.50
25 pc. ......$3.00
100 pc. ..$10.50
(Continued)
66
Chassis Components
Order Line 800-883-0294
Hand Taps
Aluminum Steering Arm
High Speed Steel hand taps are for
use by hand or in a turning lathe for
quick threading. Taps are available
in RH or LH thread. They feature
straight flutes and a bright finish.
Lightweight aluminum steering arms
available in both fine and coarse spline.
Sold individually.
Edge
11-121.....Aluminum Steering Arm, 3 1/2” Centers, Edge, ea.
(Coarse)................................................................................$51.95
Pre Edge
11-120…..Aluminum Steering Arm, 3 5/8” Centers,
Original Indy's, ea. (Fine) ....................................................$49.95
12-530…..Aluminum Arm, 4 7/8” Centers, ea. (Fine) Twist..................$51.95
12-527…..Aluminum Arm, 3 3/4" Centers, RH 10 Degree Twist,
(Fine) ....................................................................................$93.95
12-528…..Aluminum Arm, 3 3/4" Centers, LH 10 Degree Twist,
(Fine) ....................................................................................$93.95
Right Hand Taps
03-387.....RH Tap, 1/4”-28 NF, Plug ......................................................$5.95
03-388.....RH Tap, 5/16”-24 NF, Plug ....................................................$7.60
03-389.....RH Tap, 3/8”-24 NF, Plug ......................................................$9.75
03-390.....RH Tap, 7/16”-20 NF, Plug ..................................................$15.45
03-391.....RH Tap, 1/2”-20 NF, Plug ....................................................$15.75
Left Hand Taps
03-393.....LH Tap, 1/4”-28 NF, Plug ........................................................$8.45
03-394.....LH Tap, 5/16”-24 NF, Plug ....................................................$10.55
03-395.....LH Tap, 3/8”-24 NF, Plug ......................................................$15.65
03-396.....LH Tap, 7/16”-20 NF, Plug ....................................................$20.35
03-397.....LH Tap, 1/2”-20 NF, Plug ......................................................$22.00
Torsion Bars
Adjustable torsion bar/sway bar
assemblies for Polaris chassis.
Available with a 3/4” solid aluminum bar and with a 7/8” x .065”
or a 7/8” x .083” Chrome-Moly steel torsion bar. All kits have a
1” OD outer housing. Kits contain torsion bar w/housing, chassis mounts, arms w/rod ends and fasteners. Splined ends listed below use the fine 48-spline arms. These are the same as
the original Polaris. The torsion bars with housing will interchange with the standard Polaris aluminum torsion bar kit.
Spindles
Spindles are OEM Polaris. Sold individually. The hardened 2 1/8” wide spindle
fits the Wahl Extruded IFS skis.
Pre-Edge
11-128.....Spindle, Standard, Original Indy, OEM6230073, 48 Spline....$108.95
11-130…. Spindle, Hard, fits Original Indy, OEM 6230075, 48 Spline....$149.50
11-132…. Spindle, 1” Taller at Base, fit '97-'99 and
some 00'-01, 48 Spline ............................................................$128.00
Edge
11-133…..Spindle, OEM 6230206, 2000 & newer,
Hardened 23 Spline............................$87.25
11-131…..Spindle, OEM 6230248, 2000 & newer,
Standard 23 Spline ............................$87.25
11-136…..Spindle, Hardened, 23 Spline,
2 1/8” wide..........................................$97.50
Spindle Inserts
11-138…..Bushing, Spindle Insert, Steel, 5/8” x 3” (stock)....................$6.95
11-139…..Bushing, Spindle Insert, Steel, 5/8” x 2 1/8” ..........................$8.00
Spindle Bushing Set
Includes two washers, two 3/4” top
and two 7/8” lower bushings.
11-134A.....Polaris, Original Indy ..........................................................$12.75
11-137A.....Polaris, Pro-X & Pro XR ....................................................$35.95
Bronze Bushings
Aluminum Collar
These oil impregnated oilite bronze bushings have many
uses. Including suspension arms, steering posts, spindles
and A-frames.
Sleeve Bushings
01-058.....Bronze Sleeve Bushing, 5/8” ID, 3/4” OD, 1” Long ................$1.55
01-057.....Bronze Sleeve Bushing, 5/8” ID, 3/4” OD, 1 1/4” Long ........$1.65
01-036.....Bronze Sleeve Bushing, 3/4” ID, 7/8” OD, 1” Long ................$2.25
01-037.....Bronze Sleeve Bushing, 7/8” ID, 1” OD, 1” Long ..................$1.75
01-038.....Bronze Sleeve Bushing, 1” ID, 1 1/8” OD, 1” Long................$1.95
01-039.....Bronze Sleeve Bushing, 1 1/8” ID, 1 1/4” OD, 1” Long ........$2.25
Flange Bushings
01-140.....Bronze Flange Bushing, 5/8” ID, 3/4” OD, 1/2” Long ............$1.75
01-141.....Bronze Flange Bushing, 5/8” ID, 3/4” OD, 1 1/8” Long ........$2.95
01-056.....Bronze Flange Bushing, 3/4'' ID, 7/8'' OD, 1/2'' Long ............$3.00
01-067.....Bronze Flange Bushing, 3/4” ID, 7/8” OD, 1” Long ................$1.75
01-076.....Arctic Vintage Spindle Bushing, OEM, 3/4” ID, .942” OD,
1 1/8” Long ............................................................................$2.95
01-065.....Bronze Flange Bushing, 3/4” ID, 1” OD, 1” Long ..................$2.80
01-066.....Bronze Flange Bushing, 7/8” ID, 1” OD, 1” Long ..................$3.75
01-069.....Bronze Flange Bushing, 7/8” ID, 1 1/8” OD, 1” Long ............$3.95
01-068.....Bronze Flange Bushing, 1” ID, 1 1/8” OD, 1” Long................$5.70
Aluminum clamp-on collars useful in locating
torsion bars, steering posts, etc.
02-221.....Aluminum Clamp-On Collar, 7/8'' ..........................................$6.95
02-234.....Aluminum Clamp-On Collar, 1'' ..............................................$6.95
02-223.....Aluminum Clamp-On Collar, 1 1/8'' ......................................$11.50
Steering Hoop
This 4130 Moly steering hoop weighs approximately half of stock. 16 3/4” ID
11-220…..Moly Steering Hoop..............................................................$49.95
Aluminum Support Block
11-230….Aluminum Support Block, Steering Post, 7/8” ID, ea. ..........$49.95
11-231.....Aluminum Support Block, Steering Post, 1'' ID, ea...............$49.95
11-232.....Steering Post Support Block Bushing, 1'' ID, ea. ................$12.00
67
CHASSIS COMPONENTS
Torsion Bar Kit
12-521…..Polaris Torsion Bar Kit, Aluminum, OEM 2872395 ............$339.95
12-523…..Polaris Torsion Bar Kit, Moly, 7/8” x .065”..........................$335.00
12-524…..Polaris Torsion Bar Kit, Moly, 7/8” x .083”..........................$335.00
Torsion Bars
12-520A…Moly Torsion Bar w/Housing, 7/8” x .065” x 32 3/4" ............$84.95
12-522A…Moly Torsion Bar w/Housing, 7/8” x .083” x 32 3/4" ............$84.95
12-518A....Custom Length Torsion Bar, 7/8" x .083" with Housing ......$94.95
Splined Ends
12-525…..Torsion Bar Splined End, 3/4” OD........................................$22.50
12-526…..Torsion Bar Splined End, 1” OD ..........................................$24.35
Torsion Arms
11-120…..Torsion Bar Arm, 3 5/8” Centers ..........................................$49.95
12-527…..Torsion Bar Arm, 10 Degree Twist, RH, 3 3/4” Centers ......$93.95
12-528…..Torsion Bar Arm, 10 Degree Twist, LH, 3 3/4” Centers ......$93.95
12-530…..Torsion Bar Arm, 4 7/8” Centers ..........................................$51.95
Mounting Bracket
12-519.....Aluminum Mounting Bracket, Torsion Bar ............................$19.50
Chassis Components
Order Line 800-883-0294
Handlebars
Lightweight 7/8” x .049”, 4130
chrome moly handlebars.
Powder-coated Black.
Drag
11-240…..Handlebar,
11-242…..Handlebar,
OEM
11-244…..Handlebar,
Oval
11-246…..Handlebar,
11-247…..Handlebar,
11-245…..Handlebar,
“SuperStock” MotorMounts
11-247
These mounts limit the amount of engine movement, keeping
clutches in alignment. The mounts are available in hard 90
durometer for Polaris, Arctic and Ski-Doo DSA. VMax 500
and 600 require 3 mounts and stiffening ring for left front, VMax 4 requires
4 mounts.
11-245
11-240
24” Drag ............................................................$25.00
29” Standard ......................................................$25.00
Polaris
12-100…..Polaris Front Motor Mount, 90 Durometer,
Original Indy (split)................................................................$18.95
12-102…..Polaris Rear Motor Mount, 90 Durometer, Original Indy ‘97-’02
600, 700, 800 and ‘99-’03 XCR 800 (.890” Thick) ..............$18.95
12-103…..Polaris Front Motor Mount, ‘97-’02 600, 700, 800 and
‘99-’03 XCR 800 (.530” Thick)..............................................$18.95
12-106…..Polaris Front Motor Mount, '03-'05 600, 700 & 800, ea.
(.725'' thick) ..........................................................................$18.95
12-108.....Polaris Rear Motor Mount, ‘03-’05 600, 700, 800
not Pro X (.800” Thick) ........................................................$18.95
2” Rise ..............................................................$40.00
Oval, 2” Forward, Leftside ................................$45.00
Oval, 2'' Rise, 2” Forward, Left Side..................$45.00
Oval, Straight, Left Side ....................................$45.00
Handlebar Accessories
Grips, clamps and tape available for
various needs.
Handlebar Clamps
11-260…..Aluminum Handlebar Clamp, Dual 3” Wide ........................$11.60
11-262…..Aluminum Handlebar Clamp, Single 3/4” Wide....................$10.50
Handlebar Mount
11-140…..Steering Post Mount, 4-Bolt Pattern, Weld-on, 1” ID ............$7.50
Grips
11-264…..Handlebar Grip, Polaris, ea ..................................................$11.60
11-265…..Handlebar Grip, Arctic, ea ......................................................$6.30
11-263…..Ultra Handle Bar Grips, 8 1/2” Long, pr. ..............................$19.95
11-268…..SLP Cushion Grips, PVC Vinyl Closed Cell Foam, pr. ..........$8.95
Tape and Plug
11-267…..Rubber Handlebar Tape, 3/4” x 22' Roll ................................$5.25
11-269......Aluminum Handlebar Plug ..................................................$14.95
Arctic
12-110…..Arctic Front Motor Mount, T-Cat,
600 & 800 ZRT, 1/2”-20 Thread............................................$22.95
12-111.....Arctic Front Motor Mount, ZR 600, 700, 800 & 900,
3/8”-16 Thread ......................................................................$25.95
Ski-Doo
12-120…..Ski-Doo Motor Mount, Pre Rev (.850” Thick) ......................$19.95
Yamaha
12-132…..Yamaha Motor Mount Stiffening Ring (Left Front) ................$4.25
12-136…..Yamaha Motor Mount, Front SX, SXR & SRX ('97-On),
Square, 90 Durometer. ........................................................$22.80
12-138…..Yamaha Motor Mount, Rear SX, SXR & SRX ('97-On)
& all VMAX, Round, 90 Durometer (.875” Thick) ................$19.95
Arctic Vintage Motor Mount
The same motor mount found on the early
Arctic Z’s and the 1980 Arctic Sno Pro. Fastens
to chassis with two 1/4” bolts and a 3/8” mount
bolt into the motor plate.
Big Twin
Monster Mount
CHASSIS COMPONENTS
12-115.....Motor Mount, Arctic Z and 1980 Arctic Sno Pro ..................$33.50
WMS Torque Arms
A black anodized aluminum motor mount plate for the Arctic
ZR 800 & 900. Especially helpful with big bore kits, eliminating engine movement for greater clutching efficiency. Kit
includes aluminum motor mount plate, three non-seperable
rubber mounts and fasteners.
The only Torque Arm you want! With a
new design, Rubber dampening torque
arms decrease vibration but still limit
engine movement increasing belt life
and acceleration.
12-112.....Monster Mount, Arctic ZR 800 & 900 ................................$155.00
Engine Push Arms
Polaris
11-274.....Torque Arm, '97-'01 600, 700 & 800 XC, SKS, RMK Twins $75.95
11-276.....Torque Arm, 99-02 XCR 700/800 Triple,
Ultra, XCR600 Special & Storm............................................$75.95
11-278.....Torque Arm, 01-02 XC 440/500/600 Edge ..........................$67.95
11-280.....Torque Arm, 01-02 XC 700/800 Edge ..................................$67.95
11-282.....Torque Arm, '02-'05 All Big Block Polaris, 700/800 XC,
RMK, Switchback ................................................................$79.95
11-284.....Torque Arm, '02-'05 All Small Block Polaris 600, XC, RMK..$79.95
11-270.....Torque Arm, 2005-06 Polaris 700/900 IQ ............................$94.95
Ski-Doo
11-273.....Torque Arm, All 3-Series Motors, 600, 700 & 800 Reed
Valve Twins ..........................................................................$75.95
11-275.....Torque Arm, All REV Chassis ..............................................$83.95
The high torque of Polaris’ twin
engines create unwanted engine
movement. SLP’s push arms help eliminate this problem by
pushing from the right side shock tower toward the front of
the recoil. When used in conjunction with a Torque Arm,
engine movement is nearly eliminated.
68
11-277…..Engine Push Arm, '97-’02 Gen II, Big Block Twin ................$47.95
11-279…..Engine Push Arm, '00-'05 Edge Chassis ............................$47.95
11-281…..Engine Push Arm, '02-'04 Pro X Chassis (Except 600) ......$47.95
11-283…..Engine Push Arm, '06-'07 600 HO Carb Model ..................$47.95
11-272…..Engine Push Arm, '07-'08 600 & 700 HO CFI,
800 Dragon ................................................................$47.95
Chassis Components
Order Line 800-883-0294
Big Twin Torque Link Kit
Torque Stop
Designed to be used on big twin 800 &
900 Arctic Cats, this new torque link
eliminates engine movement when
used in conjunction with the rear engine
mount limiter. The Torque link Features a rubber bonded
bushing for vibration, a heim joint for precise alignment and
stainless steel brackets. Comes with two rear motor mounts.
Installs easily without chassis modifications.
A 1 1/8” OD rubber stop with a 3/8” x 2
1/2” coarse thread attached. Can be used
to push on the front or rear of the engine.
11-271.....Torque Stop, Engine, 3/8”-16 Thread ....................................$8.15
Fyre Jacket
This fire retardant heat sleeve works great
near brake components, exhaust systems
and high wear points. 3/8” ID fits over
spark plug wires, cables 1/8”, 3/16” & 1/4”
fuel line. The 5/8” ID fits over the 3/8” ID
hose or two 1/4” lines.
11-285.....Big Twin Torque Link, Arctic Cat Twins, set ........................$135.00
Starter Pull Rope
& Handle
08-199…..Fyre Jacket, 3/8” ID x 30” ....................................................$17.95
08-201…..Fyre Jacket, 5/8” ID x 30” ....................................................$19.95
Polaris pull rope and handle along with
an aluminum pull rope bracket to fit 7/8” tube.
Exhaust Wrap
11-226.....Rope, Starter, 1/4'' x 6 1/2 ft ..................................................$9.95
11-227.....Handle, Recoil, Black..............................................................$6.70
11-228.....Pull Rope Bracket, Aluminum (for 7/8'' tube)........................$26.00
Exhaust wrap not only works great for
keeping heat in the pipe, but also acts as a
heat shield by protecting wires, cables,
hoses and components that may be affected by high temps produced. Can be held in
place by using stainless steel wire. The
color is black and it is sold in rolls of 50 feet.
Steel Silencers
These silencers meet the new ISR
rule requirements for drag racing,
having at least 15 holes per square
inch and a hole size of at least 1/16”.
Available in four sizes with all having a 3” length. Clamp-on
or weld-on.
11-350…..Exhaust Wrap, 2” x 50’ ........................................................$39.95
11-353…..Stainless Steel Wire, .032" diameter, 1 lb.
(approx. 600 ft.) ....................................................................$25.95
Exhaust Springs
3” Silencers
11-365…..Steel Silencer, 1” ID, 2 1/4” OD............................................$45.95
11-366…..Steel Silencer, 1 1/8” ID, 2 1/4” OD ....................................$45.95
11-367…..Steel Silencer, 1 1/4” ID, 2 1/4” OD ....................................$45.95
11-368…..Steel Silencer, 1 3/8” ID, 2 1/4” OD ....................................$45.95
Repacking Kit
11-370…..Repacking Kit, 9” x 15” ........................................................$16.95
Quality OEM exhaust springs for maximum
durability. Available in two lengths.
11-380…..Exhaust Spring, 1 3/4" length ................................................$1.95
11-381…..Exhaust Spring, 2 1/2” length ................................................$1.95
Cable Ties
Rebuildable aluminum silencers effectively reduce sound levels to pass
most tech inspections. The end cap is
removable with three Allen head
screws for a quick rebuild of the fiber packing. Shorten your
stinger 6” when mounting to maintain correct flow and tuning
length. Weld-on or clamp-on.
7” Silencers
11-360…..7” Silencer,
11-361…..7” Silencer,
9” Silencers
11-362…..9” Silencer,
11-363…..9” Silencer,
11-364…..9” Silencer,
Top quality ties that look great on your
machine. Composed of very durable,
high tensile strength nylon.
Manufactured by Tube Ties, they come
in a reusable plastic tube. Made in the
USA.
4” Cable Tie
11-540.....Cable Tie,
11-541.....Cable Tie,
11-542.....Cable Tie,
11-543.....Cable Tie,
11-544.....Cable Tie,
8” Cable Tie
11-550.....Cable Tie,
11-551.....Cable Tie,
11-552.....Cable Tie,
11-553.....Cable Tie,
11-554.....Cable Tie,
11.5” Cable Tie
11-561.....Cable Tie,
11-562.....Cable Tie,
11-563.....Cable Tie,
11-564.....Cable Tie,
1” ID, 2 1/4" OD ................................................$48.95
1 1/8” ID, 2 1/4" OD ..........................................$48.95
1 1/4" ID, 3” OD ................................................$52.95
1 3/8” ID, 3” OD ................................................$52.95
1 1/2" ID, 3” OD ................................................$52.95
Repacking Kit
Enough long strand, high density insulation to do two 2 1/4"
Silencers.
11-370…..Repacking Kit, 9”x15” ..........................................................$16.95
69
4”, Red, 100 pc. ....................................................$4.95
4”, White, 100 pc. ..................................................$4.95
4”, Yellow, 100 pc. ................................................$4.95
4”, Blue, 100 pc. ....................................................$4.95
4”, Green, 100 pc. ................................................$4.95
8”, Red, 50 pc. ......................................................$4.95
8”, White, 50 pc. ....................................................$4.95
8”, Yellow, 50 pc. ..................................................$4.95
8”, Blue, 50 pc. ......................................................$4.95
8”, Green, 50 pc. ..................................................$4.95
11.5”, White, 35 pc. ..............................................$4.95
11.5”, Yellow, 35 pc. ..............................................$4.95
11.5”, Blue, 35 pc. ................................................$4.95
11.5”, Green, 35pc.................................................$4.95
CHASSIS COMPONENTS
Aluminum Silencers
Chassis Components
Order Line 800-883-0294
Safety Wire Pliers and
Lock Wire Kit
Formula 500
Engine Components
Get three tools in one with this spring
loaded, automatic return, safety wire
plier. You get a cutter, wire twister, and
a heavy-duty pair of pliers. Type 304 Stainless Steel lock wire
is very versatile and can be used to secure a variety of fasteners, controls or exhaust wrap. Use it to prevent a loose or lost
component from causing a disaster. Kit includes a 25 ft. spool
of .032” diameter stainless steel wire. Wire can also be purchased separately. Safety wire should not be re-used.
Pistons
17-810…..Piston, 500cc, Std., ea. (1.5 mm ring thickness) ................$77.95
17-824…..Piston, 500cc, Std., ea. (1.2 mm ring thickness) ................$77.95
17-825…..Piston, 500cc, .010'' over, ea. (1.2 mm ring thickness) ......$77.95
17-826…..Piston, 500cc, .020'' over, ea. (1.2 mm ring thickness) ......$77.95
17-808…..Piston Pin, 2.480” (1.5mm ring) ..........................................$17.80
17-832…..Piston Pin, 2.320” (1.2mm ring) ..........................................$17.40
17-818…..Bearing, Piston Pin ..............................................................$18.95
17-809…..Piston Pin Clip........................................................................$1.05
Piston Rings
17-813…..Piston Ring, 500cc, Std., ea. (1.5 mm thick) ......................$29.85
17-827…..Piston Ring, 500cc, Std., ea. (1.2 mm thick) ......................$29.35
17-828…..Piston Ring, 500cc, .010'' over, ea. (1.2 mm thick) ............$39.95
17-829…..Piston Ring, 500cc, .020'' over, ea. (1.2 mm thick) ............$34.65
Gaskets & Seals
17-816…..Gasket, Head ......................................................................$29.65
17-817…..Gasket, Base ......................................................................$28.95
17-819…..Gasket, Exhaust ..................................................................$13.95
17-806…..Seal, Crank Case ................................................................$15.70
Water Pump
17-807…..Gasket, Water Pump................................................................$.95
17-804…..O'Ring, Water Pump ..............................................................$2.90
17-805…..Belt, Water Pump ................................................................$27.25
11-352…..Safety Lock Wire & Pliers Kit ..............................................$34.95
11-353…..Safety Lock Wire, .032” Diameter, 1 lb. (approx. 600 ft.) ....$25.95
Tunnel Protectors
Aluminum
These aluminum tunnel protectors are
1” high, 7/8” wide and 50 1/2” long.
Sold as a pair.
02-070.....Tunnel Protector, Aluminum, pr. ......................................$42.00
Front Suspension
Plastic
Plastic protectors, OEM's for Ski-Doo and Polaris, whatever
your application or need. The three Ski-doo choices listed are
the working heights. The Polaris is OEM rivet pattern.
Trailing Arms & Bushings
17-802….Trailing Arm, LH ..................................................................$174.95
17-803….Trailing Arm, RH..................................................................$174.95
11-134A...Spindle Bushing Set, Polaris, Original Indy..........................$12.75
11-124A...Spindle Bushing Set, Bronze, Polaris Indy
(must be reamed after installation) ......................................$13.95
Spindles
11-128…..Spindle, Standard, Original Indy, OEM 6230073,
48 Spline ............................................................................$108.95
11-130…..Spindle, Hard (fits early Indy's) OEM 6230075, ea. ..........$149.50
11-138…..Bushing, Spindle Insert, Steel, 5/8'' x 3'' (Stock), ea. ............$6.95
11-139…..Bushing, Spindle Insert, Steel, 5/8'' x 2 3/16'', ea. ................$8.00
11-120…..Aluminum Steering Arm, Original Indy, 3 5/8'', ea.
(48 spline)............................................................................$49.95
Shocks
17-822…..Ski Shock, Formula 500 ......................................................$27.70
02-320A...Coil Over Adapter Kit, Fox Shock, 1.650" ID ......................$39.95
17-830…..Aluminum Spring Retainer, 1 7/8'' ID, ea. ............................$14.00
02-071.....Polaris Plastic Tunnel Protector, 1 1/4”x1” High, 55” Long ..$14.95
02-072.....Ski-Doo Tunnel Protector Slide, 1” High and 50” Long ........$10.35
02-073.....Ski-Doo Tunnel Protector, 3/4” High and 55 1/2” Long ..........$8.50
02-074.....Ski-Doo Tunnel Protector, OEM 1/2” High and 50” Long ......$5.95
CHASSIS COMPONENTS
Wahl Drag Seats
These lightweight seats are 16”
wide and 24” long. They come
standard on all of the Wahl
Brothers Drag Chassis. Self adhesive Velcro is supplied to attach the seat to the chassis.
Seats are all black with your choice of red, green, blue or
black trim. They weigh approximately 3 pounds.
14-500…..Seat,
14-502…..Seat,
14-504…..Seat,
14-506…..Seat,
Rear Suspension
Shocks
17-821…..Front Arm Shock, Rear Suspension, Formula 500 ..............$49.95
17-823…..Rear Arm Shock, Rear Suspension, Formula 500 ..............$24.95
Slides
02-006…..Standard UHMW Slide, 54'', Polaris Original, ea.................$13.50
02-008…..Standard UHMW Slide, 53 1/2'', Polaris Storm
(1.475'' Wide), ea. ..............................................................$14.00
Idlers
02-380…..Idler Wheel, 6 3/8'', ea. ........................................................$19.95
02-700A...6.400" Wear Resistant Wheel, 3/4" ID inserts, ea. ..............$91.95 .
17-831….Carrier Wheel, Rear Suspension Arm ..................................$27.70 .
Black Trim ................................................................$199.95
Red Trim ..................................................................$199.95
Blue Trim ..................................................................$199.95
Green Trim................................................................$199.95
Velcro
Available with or without adhesive backing in 1” and 2”
widths. Color is black. Priced per foot. (Loop is soft fuzzy
side.)
Self Adhesive
14-520…..Velcro,
14-522…..Velcro,
14-521…..Velcro,
14-523…..Velcro,
Non Adhesive
14-526…..Velcro,
14-527…..Velcro,
1”,
1”,
2”,
2”,
Self Adhesive,
Self Adhesive,
Self Adhesive,
Self Adhesive,
Chaincase
17-801…..Tensioner, Chaincase ..........................................................$52.25
17-820…..Gasket, Chaincase ................................................................$6.95
02-392…..NTN 25mm ID Bearing, OEM 6205, ea. ................................$8.65
05-825…..Polaris Chaincase Seal, 52mm OD, OEM 3610030..............$8.15 .
Hook, ft ........................................$1.50
Loop, ft..........................................$1.50
Hook, ft ........................................$2.50
Loop, ft..........................................$2.50
Brakes
08-152….Kelsey Hayes Caliper, Piston Side Only ..............................$65.00
08-227....KH Pad, Polaris Side Load & Wahl, ea. ................................$22.95
1”, Plain Back, Loop, ft ..............................................$1.00
2”, Plain Back, Loop, ft ..............................................$1.50
70
Shocks
Order Line 800-883-0294
Shocks
Fox Zero Pro Shocks
The new lighter aluminum shock bodies are threaded to allow easy spring
tension adjustment. Available lengths
are 10”, 12” & 14”. Shock length can
be adjusted by adding or deleting
spacers inside or by changing eyelet length. Includes 3/8” ID
spacers and spring retainers. Shocks are sold as pairs.
Fox MXR Float Shocks
Wahl Brothers Racing has teamed up
with Fox shocks to bring you the lightest,
most adjustable shock in the snowmobile market place. The FLOAT MXR
shock is an ultra light shock that weighs only 1.1 lbs. at
10.25”. The new Float Shock has many new features, including AVA, a technology that incorporates new levels of finetuning adjustment. AVA increases or decreases the volume of
the positive air in the spring chamber. This allows the rider to
alter the shape of the spring curve. AVA allows as much as
200 lbs. of adjustment in spring rate. Instead of using an
external spring, the internal air chamber can be adjusted with
an included air pump.
Available in two standard lengths, you can add shaft
extensions to get you to your desired length. The 10.25” can
be taken to 15” and the 9.5” shock can be lengthened out to
13.5”. Shocks come with all necessary hardware. Purchase
extensions separately.
Shocks
11-294A....10” Fox Shock w/o Spring, pr. ..........................................$549.95
11-296A....12” Fox Shock w/o Spring, pr. ..........................................$549.95
11-295A....14” Fox Shock w/o Spring, pr. ..........................................$549.95
Shock Shaft Spacers
11-297…..Shock Shaft Spacer, 1/2” ID, .250” Long ..............................$3.00
11-298…..Shock Shaft Spacer, 1/2” ID, .500” Long ..............................$3.25
11-299…..Shock Shaft Spacer, 1/2” ID, 1.00” Long ..............................$3.50
Shock Eyelets/ Components
11-286…..Aluminum Shock Eyelet, 1.14”, ea.......................................$23.95
11-287…..Aluminum Shock Eyelet, 1.39”, ea.......................................$23.95
11-288…..Aluminum Shock Eyelet, 1.64”, ea.......................................$24.95
11-290…..Snap Ring, Shock Eyelet, ea. ..................................................$.60
11-289…..Spherical Bearing, 1” OD, 1/2” ID, .390” Wide, ea.................$8.25
11-291…..Aluminum Shock Eyelet Insert, 5/16” ID, ea. ........................$2.95
11-293…..Aluminum Shock Eyelet Insert, 3/8” ID, ea. ..........................$2.95
Spring Retainer
11-303…..Fox Shock Spring Retainer, ea. ..........................................$14.00
Shocks
11-337A...Fox Shock, Float, MXR, 9.5", pr.........................................$620.00
11-343A...Fox Shock, Float, MXR, 10.25'', pr.....................................$620.00
11-335…..Fox Shock, Float, MXR, 10.25'', ea. ..................................$310.00
11-348A...Fox Shock, Float, MXR, w/Extension, (Wahl Drag Susp.)
12.50'', ea. ..........................................................................$348.00
11-338…..Aluminum Schrader Valve with O’Ring ................................$14.50
11-351…..Air Filler Extension, 90 Degree ............................................$19.95
Pump
11-341…..Fox High Pressure Pump with Bleed ..................................$30.00
Fox Shock Service,
Rebuild Kits & Tools
Service Kit
11-306…..Shock Service Kit (3 O-Rings & 2
Seals)......................................................................................................$8.25
Rebuild Kit
11-308…..Rebuild Kit (6 O-Rings, 2 Seals & Piston Seals) ................$20.75
Rebuild Tools
11-330…..Body Holding Tool, 1 625” (steel shock) ..............................$29.95
11-331…..Body Holding Tool, 1.680” (Zero Pro shock) ........................$29.95
11-332…..Shaft Holding Tool, 1/2”........................................................$22.50
11-397…..Shaft Holding Tool, 5/8”........................................................$22.50
11-336…..Pik Set, 2 pc. ........................................................................$10.95
Fox Float Shock Accessories
Extensions & Holding Tool
11-345…..Fox Float Shock Extension, .750'', ea. ................................$12.50
11-346…..Fox Float Shock Extension, 1.00'', ea. ................................$13.65
11-347…..Fox Float Shock Extension, 2.00'', ea. ................................$14.35
11-349…..Fox Float Shock Extension, 2.25'', ea. ................................$15.25
11-339…..Body Clamp, 1.060'' ID, MXR Fox Float Shock ..................$29.95
11-338…..Aluminum Schrader Valve w/o’ring, OEM Replacement......$14.50
11-351…..90° Extension for Schrader Valve ........................................$19.95
Nitrogen Kit
Great tool to have if you use Fox
shocks. Nitrogen is highly recommended for use with Fox Float
shocks. Kit includes regulator to
hook up to your nitrogen tank and inflation needle with valves
and gauge.
Fox 'T' Extension
Allows you to convert your float shock to be used in the Wahl
Bros. Rear suspension.
11-328…..T-Extension, Fox Float, 3.315" Long....................................$32.50
Fox Float R Shocks
11-320…..Nitrogen Charge Kit............................................................$299.95
11-324…..Replacement Needle............................................................$74.50
This incredibly light, best performing
oil dampened air shock that the market has to offer keeps getting better
and is finding its way into the snowmobile market via the racing scene. Available in two lengths, the 6 1/2” weighs only
.44 lbs., and the 7 7/8” weighs only .55 lbs. The Fox R shock
has adjustable rebound. The 6 1/2” shock has 1.5” of travel
and the 7 7/8” shock has 2” of travel. These shocks are
designed to be used in mini sled applications or in application
where shorter lengths are desired. Sold individually.
Shock Oil
11-340.....Fox Shock Oil, qt...................................................................$11.35
11-342.....Fox Shock Oil, gal.................................................................$39.95
11-329…..Mini Fox Float R Shock, 6 1/2" Length, 1.5” travel, ea. ....$254.95
11-333…..Mini Fox Float R Shock, 7 7/8" Length, 2” travel, ea. ........$254.95
71
SHOCKS
Genuine Fox Shock oil designed for snowmobile use. Same as OEM shocks are
furnished with.
Shocks
Order Line 800-883-0294
RydeFX Shock Tools
Polaris Shock Springs
Tools for rebuilding or revalving RydeFX 9000 series shock
absorbers.
These Genuine Polaris Springs, unless otherwise noted, are available in 4 lengths.
ID is 1 7/8”. Can be used for front suspension
springs and rear suspension springs.
Fill Needle w/Gauge
In a plastic case the fill needle w/gauge includes
five replacement needles. Also works for Fox
Shocks.
6” Spring
02-900.....85 lb. Black Spring, OEM 7041830-067 ..............................$79.95
02-901.....100 lb. Black Spring, OEM 7041831-067 ............................$81.45
02-902.....120 lb. Black Spring, OEM 7041832-067 ............................$79.95
02-903.....140 lb. Black Spring, OEM 7041833-067 ............................$79.95
02-905.....200 lb. Silver Spring ............................................................$74.50
11-391.....RydeFX Fill Needle w/Gauge ............................................$169.95
11-392.....Gas Fill Needles, 20 pc. ......................................................$32.95
7” Spring
02-906.....85 lb. Black Spring, OEM 7041362-067 ..............................$69.75
02-907.....100 lb. Black Spring, OEM 7041678-067 ............................$69.75
02-908.....120 lb. Black WORKS Spring, (1.780” ID)............................$60.00
02-909.....150 lb. Black WORKS Spring, (1.780” ID)............................$60.00
02-910.....160 lb. Black Spring, OEM 7041826-067 ............................$59.50
02-911.....180 lb. Black Spring, OEM 7041827-067 ............................$57.95
02-912.....200 lb. Black Spring, OEM 7041828-067 ............................$57.95
02-913.....220 lb. Black Spring, OEM 7041829-067 ............................$51.95
Clamps
11-395.....Body Clamp, 1 3/4” ID ..........................................................$29.95
11-396.....Reservoir Clamp, 2 1/8” ID ..................................................$29.95
11-397.....Shaft Holding Tool, 5/8” ID....................................................$22.50
Cylinder Head Wrench
Available in a lever type spanner
wrench or in a socket type.
7.50” Spring
02-915.....85 lb. Black Spring, OEM 7041561-067 ..............................$57.95
02-916.....126 lb. Black Spring, OEM 7041364-067 ............................$26.95
02-917.....160 lb. Black Spring, OEM 7041914-067 ............................$28.95
02-918.....170 lb. Black WORKS Spring, (1.780” ID)............................$45.00
02-919.....170 lb. Black Spring, OEM 7042050-067, (Larger ID) ........$26.95
02-920.....190 lb. Black Spring, OEM 7041870-067 ............................$46.50
02-921.....200 lb. Black Spring, OEM 7041797-067 ............................$46.50
02-922.....200/variable lb. Black Spring, OEM 7041253-067 ..............$57.95
02-923.....225 lb. Black Spring, OEM 7041822-067 ............................$34.95
02-924.....250 lb. Black Spring, OEM 7041792-067 ............................$34.95
11-393.....Cylinder Head Wrench..........................................................$19.95
11-394.....Cylinder Head Socket ..........................................................$42.95
Wear Band Tool
A wear band tool is used to size the solid
Teflon wearband in order to properly fit piston
and IFP.
9” Spring
02-930.....120
02-931.....140
02-932.....160
02-933.....180
02-934.....200
02-935.....220
11-399.....Wear Band Tool ....................................................................$32.95
Rebuild Kit and Shock Oil
RydeFX Slide semi-synthetic shock oil is formulated to provide superior wear protection. It has
high resistance to fluid or viscosity breakdown.
The shock rebuild kit contains all necessary
seals and wearbands to rebuild one shock
absorber.
SHOCKS
11”, pr.
12”, pr.
13”, pr.
14”, pr.
15”, pr.
OEM
OEM
OEM
OEM
OEM
OEM
7041701-067
7041677-067
7041671-067
7041672-067
7041673-067
7041674-067
............................$57.95
............................$29.25
............................$83.95
............................$40.75
............................$52.35
............................$34.95
02-279…..9” Progressive Suspension Spring, 70/100 lb,
(1.600” ID) ............................................................................$40.00
02-281…..9” Progressive Suspension Spring, 100/140 lb,
(1.570” ID) ............................................................................$40.00
02-282…..9” Progressive Suspension Spring, 115/155 lb,
1 7/8” ID................................................................................$40.00
02-283…..9” Progressive Suspension Spring, 130 lb, 1 7/8” ID ..........$40.00
02-284…..9” Progressive Suspension Spring, 155 lb, 1 7/8” ID ..........$40.00
02-285…..9” Progressive Suspension Spring, 175 lb, 1 7/8” ID ..........$40.00
02-286…..9” Progressive Suspension Spring, 195 lb, 1 7/8” ID ..........$40.00
02-287…..9” Progressive Suspension Spring, 200/350 lb,
1 7/8” ID................................................................................$40.00
Now available in five different lengths.
All are adjustable 1/4” shorter and
longer. Weight is less than 3 pounds
per pair. Composed of a heavy duty
internal spring and moly tubing, these shocks are very
durable and a favorite amongst drag racers.
Shocks,
Shocks,
Shocks,
Shocks,
Shocks,
Spring,
Spring,
Spring,
Spring,
Spring,
Spring,
9” Progressive Suspension Springs
All springs fit the standard oil shock or the
Fox shock on all Wahl Suspension except
for three springs denoted as having a smaller ID. They fit the Progressive Oil shocks and older Arctic
Cat shocks.
Pro Stock Shocks
Stock
Stock
Stock
Stock
Stock
Black
Black
Black
Black
Black
Black
Springs
11-400.....RydeFX Rebuild Kit ..............................................................$11.95
11-401.....RydeFX Slide Shock Oil, qt. ..................................................$9.95
11-430A…..Pro
11-432A…..Pro
11-434A…..Pro
11-436A…..Pro
11-437A…..Pro
lb.
lb.
lb.
lb.
lb.
lb.
..............................................$144.95
..............................................$144.95
..............................................$144.95
..............................................$144.95
..............................................$144.95
72
Shocks/Electrical
Order Line 800-883-0294
Coil Over Adapter Kit
NGK Iridium IX Spark Plugs
This threaded coil over kit can be used on
Fox Shocks w/o a threaded body and also
on oil shocks used in our Wahl Bros.
Suspensions. Length is 4” and has a
1.560” ID or 1.650” ID. Both have a 1.840”
OD. Comes with adjuster nut and a nylon tip set screw. The
1.650” ID coil over adapter kit fits the Polaris OEM shock
found on the Formula 500 race machines. Sold individually.
The ultimate in the evolution of spark plug
technology and performance, the iridium electrode is 25% smaller than a platinum or nickel
electrode allowing a reduced voltage requirement. The ultra small diameter center electrode extends the
ignition system life. These plugs supersede the EV's. Sold
individually.
09-490.....NGK
09-492.....NGK
09-493.....NGK
09-494.....NGK
Adaptor Kits
02-319A…..Coil Over Adapter Kit, Oil Shock, 1.560” ID ......................$39.95
02-320A…..Coil Over Adapter Kit, Fox Shock, 1.650” ID ....................$39.95
Components
02-321…..Coil Over Adapter Nut w/Set Screw ....................................$18.95
02-322…..Set Screws, Nylon Tip............................................................$1.65
02-323…..Coil Sleeve For Coil Over Kits ............................................$19.95
02-324…..Snap Ring For 02-319 Coil Over Kits ....................................$1.00
Spark
Spark
Spark
Spark
Plug,
Plug,
Plug,
Plug,
BR8EIX ......................................................$9.95
BR9EIX ......................................................$9.95
BPR9EIX ..................................................$10.35
BR10EIX ....................................................$9.95
NGK Spark Plugs
Superior constructed plugs for serious
power, these versatile plugs offer a wide
operating range. Features include highaluminua ceramics for improved heat
dissipation and electrical insulation, a deep-seated copper
core for a wider heat range and nickel alloy tip for longer life.
Shock Wrenches
Heat treated alloy steel. Fits most
shock applications. The single shock
wrench is for smaller shock spring
adjusters like the billet one found on Wahl suspensions with
an oil shock. The Dual wrench will work with the fox shock
adjusters and the smaller ones found on older equipment.
Resistor Plugs
09-500…..NGK Spark Plug, BR8ES ......................................................$2.60
09-509…..NGK Spark Plug, (solid cap), BR8ES ....................................$2.60
09-502…..NGK Spark Plug, BR9ES ......................................................$2.60
09-507…..NGK Spark Plug, (solid cap), BR9ES ....................................$2.60
09-504…..NGK Spark Plug, BR10ES ....................................................$2.60
09-501…..NGK Spark Plug, B8ES ........................................................$2.60
09-503…..NGK Spark Plug, B9ES ........................................................$2.60
09-505…..NGK Spark Plug, B10ES ......................................................$2.60
Gold Palladium “V” Resistor Plugs
09-506…..NGK Spark Plug, BR8EV ......................................................$6.25
“G” & “GV” Racing Plugs
09-512…..NGK Spark Plug, BR8EG ......................................................$5.95
09-514…..NGK Spark Plug, BR9EG ......................................................$5.95
09-518…..NGK Spark Plug, B8EGV ......................................................$6.95
09-520…..NGK Spark Plug, B9EGV ......................................................$6.95
09-516…..NGK Spark Plug, BR10EG ....................................................$5.95
09-522…..NGK Spark Plug, B10EGV ....................................................$7.95
09-524…..NGK Spark Plug, B105EGV ..................................................$6.95
09-525…..NGK Spark Plug, B8EV ........................................................$5.95
02-317…..Shock Wrench, Dual ............................................................$15.95
02-318…..Shock Wrench, Single............................................................$7.75
Shock Spring Tools
These tools are used for removing,
installing and adjusting the spring on
the rear shock of a snowmobile that
has the coil over. Quick, simple, and
safe to use.
02-315…..Shock Spring Tool ................................................................$49.95
02-316…..Shock King Spring Tool ........................................................$29.95
Spark Plug Indexing
Washers
Progressive Oil Shock
Available in three different lengths, these
hydraulic dampened shock absorbers are
a great value.
Shim spark plugs with washers to
align the electrodes toward intake ports as well as adjusting
the plug to piston clearance.
11-448....12 1/2” Progressive Oil Shock, pr. ......................................$149.95
11-450....13” Progressive Oil Shock, pr. ............................................$149.95
11-452....14 1/4” Progressive Oil Shock, pr. ......................................$149.95
09-570…..Spark Plug Washers, 8 pc. set for Twins ..............................$4.95
09-572…..Spark Plug Washers, 12 pc. set for Triples............................$5.95
Electrical
Spark Plug Caps
Champion Spark Plugs
The original spark plug on most Polaris models.
Resistor
09-600…..NGK Spark Plug Cap, Plastic Resistor Type, ea. ..................$3.15
09-602…..NGK Spark Plug Cap, Rubber Resistor Type, ea. ................$6.95
Non-Resistor
09-603…..NGK Spark Plug Cap, Rubber Non-Resistor Type, ea. ........$5.95
09-530.....Champion Spark Plug, RN2C ................................................$3.45
09-532.....Champion Spark Plug, RN3C ................................................$3.45
09-535.....Champion Spark Plug, RN57YCC ..........................................$3.30
73
SHOCKS/ELECTRICAL
NGK spark plug resistor covers used
with resistor spark plugs are the best
combination against radio frequency
interference. Protect your ignition from cutting out in wet conditions. Used with 7mm diameter plug wires.
ELECTRICAL
Electrical
Order Line 800-883-0294
NGK Racing Wires
Illuminated Magnifier
With an outer insulator of rugged high performance silicon, and an inner core of solid copper
wire strands, these racing wires from NGK will
help you get to the winners circle. Cap is a rubber resister type. Red wire and cap. A water
resistant cable splicer is offered to attach wires to a sealed
coil wire system.
The lighted 6X magnifying lense works
great for reading spark plugs and jets. At
1 1/2” x 4 3/4” it is small enough to fit in
your pocket. Includes two AAA batteries.
Made in USA.
09-578.....NGK Racing Wire, 20”, ea. ..................................................$21.95
09-579.....NGK Wire Connector, ea. ......................................................$6.95
KOSO EGT Gauges
Hot Wires
Available in single or dual gauges,
the new KOSO gauges display in
Fahrenheit or Celsius. With a presettable high temperature warning, the blue
backlight will change to red and flashes
until the temperature is lower than your
setting. Also records the highest temperature reached. Temperature range is 250°F-2100°F. The single gauge is 1 5/8” x 4” and the dual gauge is 2 3/8” x 4 7/8”.
Can be installed with battery or without. Kit includes wiring
harness, clamp-on EGT sensor and mounting bracket.
16-378…..Illuminated Magnifier, 6X......................................................$19.95
16-379…..Replacement Bulb, ea. ..........................................................$1.65
Hot Wires are the most technologically
advanced ignition wires available. Hot
Wires are engineered with a special built
in capacitor, allowing accumulated energy from the ignition coil to be discharged
at once, causing a spark up to 300 times more powerful. The
result of this power is faster, more complete combustion,
quicker acceleration, higher top speed and most importantly,
HORSEPOWER. Great for high compression engines. Sold
individually.
Gauges
16-180…..KOSO Single EGT Gauge, Fast Acting Sensor ................$229.95
16-181…..KOSO Dual EGT Gauge, Fast Acting Sensor ..................$359.95
Probes
16-182…..EGT Sensor, Single (60-80mm clamp), ea. ........................$99.95
16-184…..EGT Sensor, Dual (40-60mm clamps), ea...........................$99.95
16-183…..Clamp, EGT Sensor, Single 60 80mm ................................$10.95
16-185…..Clamp, EGT Sensor, Dual 40-60mm ..................................$10.95
09-580…..Hot Wire, 23” Long ..............................................................$46.95
Nology Silver Plugs
TM
Nology Silver spark plugs are especially
designed for high-performance engines.
Silver is the best electrical and thermal
conductor of any metal, which makes it
the ultimate material for a spark plug's
center electrode. The large diameter silver center electrode increases spark carrying ability and spark power. Because of the Silver the spark
plug has a broad heat range coverage. For racing or dependability and efficiency for everyday use, Nology Silver spark
plugs deliver the most powerful spark. A great idea to use
with your Hotwires for enhanced performance.
Racepak Avenger I
The Avenger I is a six-minute recording
tachometer with two EGT inputs
designed especially for snowmobiles.
This unit can be dash mounted into a 2
1/16” circular hole or onto the handlebar clamp with the optional bracket.
Face of unit is 2 7/16” square, while the back lit .800” high
display is programmable for engine RPM or EGT temp. This
system also features maximum recall of each channel and
has a user settable alarm light. The recording feature is activated by a remote thumb switch. Features one tach input and
two EGT inputs. No battery needed. Order components separately.
09-585….. Nology Silver Spark Plug, L4YS, Converts 6-7 series NGK
Non Resistor ......................................................................$10.45
09-586….. Nology Silver Spark Plug, L0S, Converts 8-10 series
NGK, Non-Resistor ............................................................$10.45
Bend-A-Light
The 11” Mini Pro Bend-A-Light has a 6”
flexshaft length while the 16” Pro BendA-Light has a 9 1/2” flex shaft length.
This 1/4” OD high intensity flexible light
bends and holds position. Works great
for checking piston wash and other
hard to see places. The 16” light
includes two AA batteries and the 11” Mini Pro includes three
AAA batteries. Replacement bulbs available.
Instrument
16-190…..Racepak Avenger I ............................................................$329.00
Probes
16-195…..Avenger I Stinger Probe, Weld-in/Clamp-on, 76” ................$64.95
16-197…..Avenger I Bullet Probe, Weld-in/Clamp-on, 76” ..................$69.95
Options
16-192…..Remote Thumb Switch, Avenger I ......................................$35.00
16-194…..Mounting Adapter Plate, Avenger I ......................................$37.25
Probe Fittings
16-226…..Weld In Fitting, ea. ................................................................$6.95
16-228…..Plug, Weld In Fitting, ea.........................................................$3.95
16-229…..Replacement Ferrule/Cap Kit
(Includes one each, cap, ferrule and weldment) ..................$12.40
16-375….. Pro Bend-A-Light, 16” ........................................................$27.95
16-376….. Mini Pro Bend-A-Light, 11”..................................................$21.95
16-377….. Replacement Bend-A-Light Bulb ..........................................$7.95
74
Electrical
Order Line 800-883-0294
Brower Timing
System
The Digitron 52SN Kit offers the user a
water temp reading recording Tach with
two EGT sensors. Sensors are stinger
probes for clamp on or weld in use. With
dual instrument display, there are 35
minutes of playback memory and the instrument automatically stores the maximum readings for end recall. Backlighting
for night use and programmable warning lights make this 3”
high x 3.5” wide instrument an efficient system. Supplied with
two Stinger probes, water temp sensor, wiring harness and
mounting bracket.
Brower Timers introduces the new
Test Center Timing System. The
TC-System can all fit into a single lumbar pack making it the perfect
tool for personal tuning and timing race events. The TC-System is
designed to capture and organize testing data so at the end of the
day each racer will have a profile with all of the day’s test results.
Features wireless timing up to 1100ft., accuracy to the 1/1000th of a
second, MPH/KPH mode allows racers to measure speed and time,
add up to 9 splits and store 199 number identified racers in the
memory. With the TC-Timer USB all timer data can be downloaded
to a computer with the TC-Results Center software and organized
into racer profiles. Set includes Timer, Start/Finish Photo Gates, 4 or
6 Tripods, Storage Bag.
16-325.....Digitron DT-52S , RPM, EGT, EGT & Water Temp ............$450.00
Probes
16-354…..Digatron Stinger Exhaust Probe, Weld-In/Clamp-On ..........$64.95
Probe Fittings
16-226…..Weld In Fitting, ea. ................................................................$6.95
16-228…..Plug, Weld In Fitting, ea.........................................................$3.95
16-229…..Replacement Ferrule/Cap Kit
(Includes one each, cap, ferrule and weldment) ..................$12.40
Timing Sets
16-370…..Brower TC Timer Set w/2 Photo Gate Sets ....................$1250.00
16-371…..Brower TC Timer Set w/3 Photo Gate Sets ....................$1645.00
16-368…..Brower TC Timer USB Set w/2 Photo Gate Sets ............$1450.00
16-371…..Brower TC Timer USB Set w/3 Photo Gate Sets ............$1845.00
Extras
16-373…..Single PhotoGate Set w/Tripods ......................................$410.00
Digitron 54SN
TX-1 Recording Tachometer
The Digitron 54SN features a highly
visible four display face. It has an
RPM input, three EGT probes and a
water temp sensor. The supplied
Stinger probes are for clamp on or
weld in use. Maximum recall readings are standard. It measures 5” wide and 3.5” high and offers over 2 hours of playback memory. Programmable warning lights and night use
backlighting are some of its other excellent features. Includes
sensors, AC wiring harness and mounting bracket.
Designed especially for Sleds and ATV’s,
this rugged built Tachometer is ready for
this seasons aggressive runs. The TX-1
Records and Re-Plays the run for clearer,
precise information. The Re-play offers
selectable playback speed, Pause and
rewind features, Cool Blue backlighting. A/C
& DC operation make the TX-1 the perfect Tach.
With a TX-1 Recording Tach you can:
* Monitor and Record Engine RPM.
* Recall Maximum RPM.
* Scroll through the recorded run on the digital screen.
* Record Run for a full 1, 5 or 10 minutes. Step through the stored run in
real time or 1/3 time increments.
* Control the gauge from a single, easy-to-reach push button to
activate recording.
* Record feature can be setup for a RPM threshold, to start recording at a
designated RPM, so no recording time is lost.
* Settable shift/warning LED light available.
* Pause run at any point or rewind & fast forward to examine run.
* Examine run down to 1/hundredth of second.
* Use in full daylight or complete darkness, at temperatures from above
130° F to below -20° F.
* Shown w/ optional alarm light.
* Battery not required
SPECIFICS:
Power~8-16v AC or DC Voltage
Range~Operation Temperatures 130 degrees F to -20F
Accurate~Digital stepper motor design proven in racing conditions
Versatile~Only tach available to connect directly to distributor-less ignitions
WITHOUT requiring any special tach adapter modules. This makes the
installation much simpler than other instruments currently on the market.
VOLTAGE REGULATOR REQUIRED (Item #16-152)
16-327.....Digitron 54S 3 Cylinder, RPM, EGT, EGT, EGT, &
Water Temp ........................................................................$550.00
Wiring Harness
A DC wiring harness is needed on some new snowmobiles
and most with EFI.
16-331.....DC Wiring Harness ..............................................................$37.50
Probes
16-354…..Digatron Stinger Exhaust Probe, Weld-In/Clamp-On ..........$64.95
Probe Fittings
16-226…..Weld In Fitting, ea. ................................................................$6.95
16-228…..Plug, Weld In Fitting, ea.........................................................$3.95
16-229…..Replacement Ferrule/Cap Kit
(Includes one each, cap, ferrule and weldment) ..................$12.40
Sensor Location Manual
An exhaust gas sensor location manual from EGT, full of tuning tips and recommendations for installing sensors.
Information is provided by the OEM’s and aftermarket engine
builders.
Tachometers
16-137…..TX-1 Recording Tachometer, 4 1/2”, Pedestal Mount........$329.95
16-138…..TX-1 Recording Tachometer, 4”, In-Dash ..........................$329.95
Extras
16-152…..Voltage Regulator, ea...........................................................$33.25
16-131…..Tach Bracket (for 1'' steering post) ......................................$24.00
16-139…..Shift/Alarm Light, TX-1 ........................................................$29.95
16-140…..Remote Switch Replacement, TX-1 ....................................$29.95
16-141…..Mounting Strap Replacement Kit, TX-1 Pedestal Mount ....$36.95
16-360.....EGT Sensor Location Manual ..............................................$15.95
Note: Recommended exhaust probe
location is 6” from piston.
75
ELECTRICAL
Digatron 52SN
ACCESSORIES
ELECTRICAL/HOODS &
Electrical/Hoods & Accessories
Order Line 800-883-0294
Batteries and Chargers
Tether Switches
Use the Gel Cell Battery to power any 12volt component. Wiring connectors are
available separately.
There are two types of safety tether switches available. Many Arctic Cat models have
normally closed ignition (NCI). Other brands
are normally open (NOI). Arctic Kitty Cat
uses NOI tether. Includes cap and cord. All are OEM parts.
16-271…..12 Volt Battery Pack, 1'' x 3 3/4'' x 2 3/8'' Tall......................$34.00
16-270…..12 Volt Battery Pack, 1 3/4” x 4” x 2” Tall ............................$26.50
16-273…..Molded Flat Connector, 2 Circuit, 12” Long
(male & female) ......................................................................$1.95
16-272…..12 Volt Battery Pack Charger ..............................................$36.95
16-274…..Replacement Avenger II & III Nicad Battery, ea. ..................$4.25
16-110…..NOI Tether Switch ................................................................$34.95
16-100…..NCI Tether Switch, Arctic ....................................................$34.95
16-102…..Replacement Tether Cord ....................................................$16.95
Taillight/Brake Light
Voltage Regulator
A plastic red lens taillight assembly is a
must for oval and enduro competitions.
It is not only required, but offers much
needed safety for drivers. Comes with a general pigtail for
quick hook-up. Can be mounted to the sled with optional
bracket. ISR approved.
A voltage regulator is needed to control
the amount of current your tach or taillight is receiving. Yellow wire connects
into power feed and brown is grounded.
16-152…..Voltage Regulator ................................................................$33.25
16-125…..Taillight Assembly ................................................................$33.25
16-126…..Aluminum Taillight Bracket ..................................................$12.00
5.0 OHM Resistor
LED Taillight
Tame that tach down with this billet
housed 5.0 OHM resistor. If your tach is
intermittent you may need one of these to
draw excess voltage off. Power passes through one end
while the other is grounded to the chassis. Sold individually.
A self contained LED taillight assembly.
This unit is complete with an aluminum
mounting bracket. It also has a convenient on/off switch for easy use and a pair of 9V batteries for
extended life. Instructions supplied for brake light hookup if
needed. ISR legal.
16-153…..Resistor, Aluminum Housed, 5.0 OHM ..................................$9.95
Rectifier
16-124…..LED Taillight Assembly with Battery ....................................$79.95
Hoods &
Accessories
AC to DC voltage convertor. For use with Auto Meter
tachometers to eliminate the battery.
16-150…..Rectifier ..................................................................................$9.50
Connectors
Fasteners
Available in three styles, these connectors
allow you to remove your engine, tach or
taillight for repairs or replacement. Sold
individually.
Hood and other chassis fastening devices to
help make things go together a little easier.
Dzus Fastener
14-300…..Dzus Fastener, Self Ejecting..................................................$3.25
14-302…..Dzus Fastener, S Spring (1” Hole Centers) ..........................$2.45
14-298…..Dzus Weldment with 'S' Spring (For chassis welding) ..........$3.25
Rubber Straps & Cups
14-310.....Rubber Strap, Arctic ....................................$6.95
14-312.....Plastic Cup, Arctic .......................................$1.99
14-314.....Rubber Strap, Polaris..................................$8.20
14-316.....Plastic Cup, Polaris.....................................$1.75
14-318.....Rubber Strap, 4”
(Use Arctic or Polaris cup) ..........................$6.95
Wellnuts
14-330.....Rubber Wellnut, 10-32 (Original Arctic Windshield) ..............$1.15
14-332.....Screw, 10-32 x 1” (Original Arctic Windshield) ........................$.40
14-331.....Rubber Wellnut, 1/4”-20 ........................................................$1.55
Lanyards & Clips
14-333.....Stainless Steel Lanyard, 6”, Nylon Coated ............................$3.25
14-334.....Stainless Steel Lanyard, 8”, Nylon Coated ............................$3.25
14-335.....Hairpin Clip, Zink Plated ..........................................................$.35
16-275…..Molded Round Connector, 1 Circuit, 12'' Long ......................$1.50
16-273…..Molded Flat Connector, 2 Circuit, 12'' Long ..........................$1.95
16-276…..Molded Flat Connector, 3 Circuit, 12'' Long ..........................$2.75
Aluminum Tach Bracket
This bracket attaches to any 1” diameter steering post allowing easy mounting of any VDO, Auto Meter or EGT
tachometer.
16-131…..Tach Bracket (for 1'' steering post) ......................................$24.00
Kill Switches
Will clamp onto any 7/8” handle bar.
OEM switches.
Tie Down Kit
Includes two Polaris rubber straps, plastic hooks
and fasteners.
16-120…..Kill Switch, Push Button ......................................................$37.95
16-122…..Kill Switch, Lever Style ........................................................$33.50
16-121…..Kill Switch, Slide Style..........................................................$34.90
76
14-317.....Tie Down Kit, Hood ..............................................................$15.75
Hoods & Accessories
Order Line 800-883-0294
Fiberglass Hoods
14-130
14-250
14-212, 14-214
14-218
14-158
14-260
14-268
14-204
14-282
Plastic Vent
This plastic vent is 4 1/2” tall x 15”
long. It can be shortened to suit
application. Black.
16-127…..Plastic Vent ............................................................................$8.15
ISC Racers Duct Tape (See Page 66)
77
HOOD & ACCESSORIES
14-110
14-262
14-283
14-205
14-160
Wahl Drag Chassis
14-204…..Wahl Drag Hood, Nose Cone w/Bubble Windshield..........$365.00
14-205…..Wahl/Ross Drag Hood w/Bubble Windshield (wide nose) $365.00
14-282…..Scorpion Fiberglass Windshield ..........................................$95.00
14-283…..Bubble Windshield, Fiberglass ..........................................$150.00
14-219
Vintage Arctic Hoods
14-260…..1973 Arctic Cat EXT Hood ................................................$300.00
14-261…..1973 Arctic Cat EXT Belly Pan ..........................................$260.00
14-262…..1973-74 Arctic Cat El Tigre Hood ......................................$300.00
14-263…..1973-74 Arctic Cat El Tigre Belly Pan................................$260.00
14-266…..1976 Arctic Cat Sno-Pro Hood ..........................................$350.00
14-267…..1977 Arctic Cat Sno-Pro Hood ..........................................$350.00
14-268…..1977 Arctic Cat Z Hood......................................................$350.00
14-269…..1974 Sno-Pro Hood ..........................................................$350.00
14-270…..1971 Arctic Cat King Kat Belly Pan ..................................$300.00
14-271…..1971 Arctic Cat King Kat Hood ..........................................$300.00
14-216, 14-217
Ski-Doo Hoods
14-158…..Ski-Doo Hood, 1994-On F Chassis ..................................$250.00
14-160…..Ski-Doo Windshield, 1994-On F Chassis ............................$85.00
14-141, 14-142
Champ Hoods
14-141…..Polaris Champ Hood, '93-'95 Wahl (narrow style) ............$285.00
14-142…..Polaris Champ Hood (original) ..........................................$285.00
14-212…..Ski-Doo Champ Hood ........................................................$275.00
14-214…..Polaris & Ski-Doo Champ Windshield ................................$90.00
14-215…..Polaris Champ Windshield (for narrow hood)......................$90.00
14-216…..Wahl Tailpiece, 16'' x 26'' Long ............................................$80.00
14-217…..Wahl Tailpiece, 16'' X 22'' Long ..........................................$80.00
14-218…..Wahl Champ Hood, 2006-Present ....................................$325.00
14-219…..Wahl Champ Windshield, 2006-Present ............................$125.00
14-196
Vintage Polaris Hoods
14-196…..1978 RXL Hood ................................................................$300.00
14-250…..1973 Starfire Hood ............................................................$350.00
14-254…..1973 Starfire Belly Pan ......................................................$350.00
14-120
Polaris Hoods
14-100…..Polaris Hood, Original Indy Style ......................................$250.00
14-110…..Polaris Hood, Aggressive Style ..........................................$250.00
14-120…..Polaris Gen II Hood ..........................................................$250.00
14-130…..Polaris Hood, 1999 to Present Edge ................................$250.00
14-100
All hoods are made of fiberglass and have a gel coat finish.
Lights and vents are not cut out, some finishing is required.
Most hoods weigh between 6 and 12 pounds, depending on
type. Because of the large size, most hoods must be shipped
by truck. Greyhound delivery is available in some cases at a
cheaper rate. Freight delivery is normally around $150.00. If
you are in the Speedee delivery zone, expect shipping to be
$60-$80.
Tools
Order Line 800-883-0294
Tools
Bend-A-Light
The 11” Mini Pro Bend-A-Light has a
6” flexshaft length while the 16” Pro
Bend-A-Light has a 9 ½” flex shaft
length. This 1/4” OD high intensity
flexible light bends and holds position. Works great for checking piston
wash and other hard to see places.
The 16” light includes two AA batteries and the 1” Mini Pro
includes three AAA batteries. Replacement bulbs available.
Exhaust Spring Pullers
Available in two different styles. You can
push or pull heavy exhaust springs.
16-552.....Push-Pull Spring Tool, 10” ....................................................$22.95
16-553.....Push-Pull Spring Tool, 15 5/8” ..............................................$22.95
Spark Plug Wrench
16-375….. Pro Bend-A-Light, 16” ........................................................$27.95
16-376….. Mini Pro Bend-A-Light, 11”..................................................$21.95
16-377….. Replacement Bend-A-Light Bulb ..........................................$7.95
A plug wrench for tight situations and
a good fit in your pocket or in your
sled.
Air Density Gauge
16-555.....Spark Plug Wrench ................................................................$6.25
As air density changes with weather
conditions, you should re-jet your carbs
to maintain optimum horsepower and
throttle response. Air density is measured as a percentage. When it changes up or
down, the difference from your baseline is the
percentage you change your main jet. A Rad
Wheel jetting guide will help you calculate the jet required
without the use of math. The air density gauge comes complete with padded carrying case. Jetting guides are sold separately. Air Density Gauges cannot be shipped by air.
Piston Pin Puller
Removes wrist pins from all sizes of
pistons without damage to piston or
connecting rod.
16-542.....Piston Pin Puller ..................................................................$29.95
TOOLS
Flywheel Puller
Pulls tough flywheels with ease. Both are top
quality pullers including 10.9 grade bolts in
6mm and 8mm. Maximum duty puller fits
Polaris snowmobiles, water craft, and ATV's.
Gauge
06-864…..Air Density Gauge..............................................................$144.95
Jetting Guides
06-865.....Jetting Guide, Mikuni Hex, 50-240 ......................................$16.95
06-866.....Jetting Guide, Mikuni Hex, 140-720 ....................................$16.95
06-867.....Jetting Guide, Keihin Hex, 90-220........................................$16.95
06-868.....Jetting Guide, Mikuni Round, 100-210 ................................$16.95
06-869.....Jetting Guide, Thousandths Jet, .055-.130 Diameter ..........$16.95
16-543.....Heavy Duty Flywheel Puller ................................................$49.95
16-544.....Maximum Duty Flywheel Puller ..........................................$109.95
Degree Wheel
A degree wheel may be mounted on the flywheel or PTO end stud to check timing or
degree marks. Use in conjunction with a dial
indicator for accurate timing or port degree
measurements.
Clutch Spring Tester
This tester is a must have for anyone
doing clutch tuning and performance
work. Composed of billet aluminum and
has a 400 lb capacity in 5 lb graduation
with 2% accuracy. Designed to be used
in a drill press, vice or arbor press.
16-540.....Degree wheel ......................................................................$13.45
Master Timing Gauge Set
The master timing set contains all the necessary accessories for timing any two cycle
engine with straight or angled plugs. It
includes adapters for 14mm and 18mm
spark plugs, head-off clamp, plunger extensions, roller contact tip, 2 1/4” OD dial indicator and extenders for timing engines with large fins. Timing
can be accomplished with the head on or off. Simple to use.
Made in the USA.
07-267.....Clutch Spring Tester, 400 lb. Capacity................................$139.95
Gram Scale
Weigh your clutch weights with a digital gram scale by Nexus. It has a 250
gram weight capacity with 1/10 gram
accuracy. Features LCD digital read
out with full calibration and a 4” x 4”
stainless steel platform. Comes with
A/C adapter, calibration weight and
with or without a carry case.
Master Timing Gauge
16-530…..Master Timing and Dial Indicator Set ................................$249.95
Options
16-532…..Dial Indicator w/ Spark Plug Adaptors, 14mm & 18mm ....$129.95
16-533…..Head-Off Timing Kit w/o Dial Indicator ................................$59.95
07-284…..Gram Scale with Case ......................................................$214.95
07-285…..Gram Scale Only (case not included)................................$183.95
78
Tools
Order Line 800-883-0294
Ramp Grinding Block
SLP Clutch Tools
Grind your weights on a Ramp Grinding Block.
Holds three of any Comet, Polaris, Arctic or other
weight at once so that they may be ground
evenly.
The Pin and Roller Tool simplifies removing the pin and roller
from a Polaris spider. It self-aligns, removes and aligns new
parts including shims and pins. The SLP Button Tool
removes buttons quickly and without damage on a Polaris
clutch. You can easily change clutch weights without removing the outer cover or clutch from the crankshaft by using the
SLP Clutch Sheave Tool.
07-286…..Ramp Grinding Block ..........................................................$23.95
Tension Adjustment Scale
An easy way to measure and set tensions on your snowmobile. This new scale has a range of 0 to
25 lbs. It is very accurate and has a very
pronounced marker to help measure
more precisely. It can be used in several
areas on a snowmobile that call for specific tension. For
example, it is great for checking secondary belt tension and
track tension. This tool is a must for anyone performance
minded.
07-281…..SLP Pin & Roller Tool ..........................................................$25.95
07-282…..SLP Button Removal Tool ....................................................$16.50
07-283…..SLP Clutch Sheave Clamp ....................................................$7.75
07-281
07-282
07-283
07-012.....Tension Adjustment Scale ....................................................$31.95
Safety Wire Pliers and Lock Wire Kit
Camoplast Track Tools
Get three tools in one with this spring loaded, automatic return,
safety wire plier. You get a cutter, wire twister, and a heavy-duty pair
of pliers. Type 304 Stainless Steel lock wire is very versatile and can
be used to secure a variety of fasteners,
controls or exhaust wrap. Use it to prevent
a loose or lost component from causing a
disaster. Kit includes a 25 ft. spool of .032”
diameter stainless steel wire. Wire can
also be purchased separately. Safety wire
should not be re-used.
Available in a two-piece construction that allows use
without track or suspension removal. The bolt type
tool is machined from hardened steel. It will fit the
1” clips and the 1 1/2” clips with the supplied inserts.
Replacement Parts
02-663…..Track Clip Tool Insert, 1” ......................................................$21.95
02-666…..Track Clip Tool Insert, 1 1/2”................................................$30.50
02-667…..Guide Bolt, Track Clip Tool ....................................................$4.50
11-352…..Safety Lock Wire & Pliers Kit ..............................................$34.95
11-353…..Safety Lock Wire, .032” Diameter, 1 lb. ..............................$25.95
Hand Taps
Power-Lift Snowmobile
Stand
High Speed Steel hand taps are for use
by hand or in a turning lathe for quick
threading. Taps are available in RH or
LH thread. They feature straight flutes
and a bright finish.
The trac-rack snowmobile lift, otherwise
known as a 'Jack Stand', is designed to
lift your sled up in the rear, but can also
lift the front of your snowmobile. It's easy;
one hand operation will lift a maximum of
30” with a 7” stroke. Lift can be adjusted
to various heights. Makes cleaning and
working on your suspension easy.
Available as just a lift or with a .063” aluminum shield for
added protection when warming up your snowmobile. The
shield can be added to any existing trac-rack.
Recommended by all manufacturers and is ISR legal.
Right Hand Taps
03-387.....RH Tap, 1/4”-28 NF, Plug ......................................................$5.95
03-388.....RH Tap, 5/16”-24 NF, Plug ....................................................$7.60
03-389.....RH Tap, 3/8”-24 NF, Plug ......................................................$9.75
03-390.....RH Tap, 7/16”-20 NF, Plug ..................................................$15.45
03-391.....RH Tap, 1/2”-20 NF, Plug ....................................................$15.75
Left Hand Taps
03-393.....LH Tap, 1/4”-28 NF, Plug ........................................................$8.45
03-394.....LH Tap, 5/16”-24 NF, Plug ....................................................$10.55
03-395.....LH Tap, 3/8”-24 NF, Plug ......................................................$15.65
03-396.....LH Tap, 7/16”-20 NF, Plug ....................................................$20.35
03-397.....LH Tap, 1/2”-20 NF, Plug ......................................................$22.00
Jack-Stand Kit
14-090A…..Power-Lift Snowmobile Stand w/Shield ..........................$134.95
Stand Components
14-091…..Power-Lift Stand, Stand only ..............................................$113.95
14-092…..Power-Lift Shield Kit, Shield only ........................................$42.50
Illuminated Magnifier
The lighted 6X magnifying lense works
great for reading spark plugs and jets. At 1
½”x 4 3/4” it is small enough to fit in your
pocket. Includes two AAA batteries. Made
in USA.
16-378…..Illuminated Magnifier, 6X......................................................$19.95
16-379…..Replacement Bulb, ea. ..........................................................$1.65
79
TOOLS
Bolt Type
02-662…..Track Clip Tool, Bolt Type ....................................................$92.95
Tools/Mini Sled Components
Order Line 800-883-0294
Heavy Duty Plastic
Siphon Pump
Draggin Skin Clutch
Max-Torque's Draggin Skin Clutch weighs only
1.25 lbs. Engagement is easily adjusted from
2200 RPM to 4500 RPM. Clutch kit includes: one
complete clutch with an 11 tooth sprocket, black
shoes and brown springs, one set each of red,
blue and green springs as well as a set of 10 g
weights and snap ring. This clutch is for the 2 cycle Kitty Cats.
Quick action polyethylene pump that
pumps to higher levels and siphons to
lower levels. Air-vent controls siphoning action. Fits 2” bung
openings in 15, 30 and 55 gallon drums. Easily empties or
fills gasoline, anti-freeze and light oils.
5/8” Bore - #35 Chain
15-150…..Draggin Skin Clutch, 5/8” Bore ..........................................$149.95
Sprockets
15-160…..11T Sprocket w/Bushing & Drum ........................................$21.95
15-162…..12T Sprocket w/Bushing & Drum ........................................$21.95
15-164…..13T Sprocket w/Bushing & Drum ........................................$21.95
15-166…..14T Sprocket w/Bushing & Drum ........................................$21.95
15-168…..15T Sprocket w/Bushing & Drum ........................................$21.95
Replacement Parts
15-208…..5/8” Hub, Sleeve & Back Plate ............................................$23.95
15-210…..Fiber Washer, 5/8” ..................................................................$.30
15-212…..Sleeve Snap Ring, 5/8”, #75....................................................$.40
15-214…..Snap Ring, 11T ........................................................................$.55
15-216…..Snap Ring, 12T ........................................................................$.60
09-090.....Heavy Duty Plastic Siphon Pump, ea. ................................$21.85
Rebuild Kits & Tools
TOOLS/MINI SLED COMPONENTS
Service Kit
11-306…..Shock Service Kit (3 O-Rings & 2 Seals) ..............................$8.25
Rebuild Kit
11-308…..Rebuild Kit (6 O-Rings, 2 Seals & Piston Seals) ................$20.75
Rebuild Tools
11-330…..Body Holding Tool, 1 625” (steel shock) ..............................$29.95
11-331…..Body Holding Tool, 1.680” (Zero Pro shock) ........................$29.95
11-332…..Shaft Holding Tool, 1/2”........................................................$22.50
11-397…..Shaft Holding Tool, 5/8”........................................................$22.50
11-336…..Pik Set, 2 pc. ........................................................................$10.95
Draggin Skin Clutch
Max-Torque's Draggin Skin Clutch
weighs only 1.25 lbs. Engagement is
easily adjusted from 2200 RPM to 4500
RPM's. Clutch kit includes: one complete
clutch with a 10 tooth sprocket, black shoes and brown springs, one
set each of white, yellow, green and purple springs as well as a set
of 7 gram weights and snap ring. This clutch is for the 4 cycle 120
XCR, Z 120 and Mini Z sleds with a #40/41/420 chain.
Nitrogen Kit
Great tool to have if you use Fox
shocks. Nitrogen is highly recommended for use with Fox Float
shocks. Kit includes regulator to
hook up to your nitrogen tank and
inflation needle with valves and gauge.
3/4” Bore - #40 Chain
15-500…..Draggin Skin Clutch, 3/4" Bore, #40/41/420 chain ............$149.95
Sprockets
15-510…..10T Sprocket w/Drum, 3/4”, #40 ..........................................$22.50
15-614…..11T Sprocket w/Drum, 3/4”, #40 ..........................................$28.95
15-615…..12T Sprocket w/Drum, 3/4”, #40 ..........................................$28.95
15-616…..13T Sprocket w/Drum, 3/4”, #40 ..........................................$28.95
15-617…..14T Sprocket w/Drum, 3/4”, #40 ..........................................$28.95
Drums
15-624…..Drum, 10T, #40 ......................................................................$6.95
15-625…..Drum, 11T, 12T, 13T & 14T, #40 ............................................$8.95
Replacement Parts
15-512…..Sleeve Snap Ring, 3/4", #87....................................................$.50
15-514…..10T Snap Ring, #131 ..............................................................$.55
15-626…..Snap Ring for 11, 12, 13 & 14T #40 Sprockets ......................$.60
15-516…..3/4” Hub, Sleeve & Back Plate ............................................$23.95
15-518…..Fiber Washer, 3/4” ..................................................................$.30
11-320…..Nitrogen Charge Kit............................................................$299.95
11-324…..Replacement Needle............................................................$74.50
Mini Sled
Components
Draggin Skin Clutch
Draggin Skin Clutch
Components
Max-Torque's Draggin Skin clutch
weighs only 1.25 lbs. Engagement is
easily adjusted from 2200 RPM's to
4500 RPM's. Clutch kit includes: one
complete clutch with a 13, 14 and 15 tooth sprocket, black
shoes and brown springs, one set each of red, blue and
green springs. This clutch is for 4 cycle 120 XCR, Z 120 and
Mini Z sleds with a #35 chain.
3/4” Bore - #35 Chain
15-550…..Draggin Skin Clutch Kit, 3/4" Bore, #35 Chain ..................$149.95
Sprockets
15-570…..12T Sprocket w/Bushing & Drum, 3/4” ................................$22.95
15-572…..13T Sprocket w/Bushing & Drum, 3/4” ................................$22.95
15-574…..14T Sprocket w/Bushing & Drum, 3/4” ................................$29.95
15-576…..15T Sprocket w/Bushing & Drum, 3/4” ................................$29.95
Replacement Components
15-512…..Sleeve Snap Ring, 3/4", #87....................................................$.50
15-516…..3/4” Hub, Sleeve and Back Plate ........................................$23.95
15-518…..Fiber Washer, 3/4” ..................................................................$.30
15-568…..Drum for 11T #35 Sprocket, Non-Machined ..........................$9.95
80
Springs
15-170…..Spring, 2200 Engagement, Black, 9 pcs. ..............................$7.50
15-172…..Spring, 2400 Engagement, Red, 9 pcs. ................................$7.50
15-174…..Spring, 2800 Engagement, Brown, 9 pcs. ............................$7.50
15-176…..Spring, 3100 Engagement, Blue, 9 pcs. ................................$7.50
15-178…..Spring, 3400 Engagement, Green, 9 pcs. ............................$7.50
15-180…..Spring, 3900 Engagement, Purple, 9 pcs. ............................$7.50
15-182…..Spring, 4100 Engagement, Yellow, 9 pcs. ............................$7.50
15-184…..Spring, 4500 Engagement, White, 9 pcs. ..............................$7.50
Weights/ Shoes
15-204…..10 g weights, 9 pc. ................................................................$6.75
15-205…..7 g weights, 9 pc. ..................................................................$6.75
15-206…..Red Shoes, 3 pc. ................................................................$49.95
15-207…..Matted Shoes, 3 pc. (standard) ..........................................$49.95
Parts
15-200…..3/16” x 1/2” Key ......................................................................$.35
15-202…..Spring Ring ............................................................................$7.65
15-203…..Spring Ring Snap Ring ............................................................$.75
Mini Sled Components
Order Line 800-883-0294
SS Clutch, 3/4” Bore
Performance Clutch Kits
The “SS” Series (six shoes) is the standard
clutch on the XCR 120 and Z 120. It comes
with wedge shoes, a green racing spring and
10T sprocket. With the wedge shoes it will
start at 1900 RPM and will lock up at 2300-2400 RPM. Fits
chain #40, #41 and #420.
This Comet clutch allows for quicker RPM's
by reducing clutch diameter from 4” to 3 1/2”.
Come standard with 11T gear and red
springs. Gearing 11T on the top and 36T on
the bottom increases speed to approximately 15 mph. The
brake strap is required with this clutch conversion. Fits Mini
Z, XCR 120 & Z 120.
15-600…..SS Clutch Kit, 3/4" Bore, 10T ..............................................$41.95
Kit
15-300.....Performance Clutch Kit, 3/4” Bore, 11T................................$69.99
Components
15-308.....Springs, 2 pc., Blue (Medium) ..............................................$6.99
15-310.....Springs, 2 pc., Black (Heavy) ................................................$9.99
15-320.....Brake Strap ..........................................................................$19.95
SS Clutch, 5/8” Bore
The “SS” Series clutch with a 5/8” bore. Fits all Kitty Cat
applications. Comes standard with 10T, #35 sprocket and silver spring.
Comet 20 Series 3/4"
Top Width Belts
15-601…..SS Clutch Kit, 5/8'' Bore, 10T ..............................................$52.95
Sprockets
15-603…..5/8'' Sprocket w/Bushing & Drum, 11T, #35 ........................$27.95
15-604…..5/8'' Sprocket w/Bushing & Drum, 12T, #35 ........................$27.95
15-605…..5/8'' Sprocket w/Bushing & Drum, 13T, #35 ........................$27.95
Comet belts for Mini-Sled applications.
Belts are of the Kevlar type, have a width
of 3/4", are tapered 13 degrees on each
side and are .375” thick. We offer them in three different
lengths. Center distance listed is for a 6” driven.
TT Clutch
A high performance (track tuned) clutch that can perform under
severe operating conditions. The major difference in this clutch versus the “SS” style is the adjustability of the shoes and the higher
engagement. By varying the number of shoes
installed, the engagement force at a given RPM
can be changed. Engagement on this clutch will
be above 3000 RPM's. Kit comes standard with
4-shoes, a green spring and a 10T sprocket.
When altering shoe configurations, it is important
to space the shoes evenly for proper clutch balance. Fits chain #40, #41 and #420.
15-800…..Comet 20 Series Belt, 203578A, 27.360” OC, 7” Center ....$22.95
15-802…..Comet 20 Series Belt, 203579A, 28.330” OC,
7 3/16” Center ......................................................................$22.95
15-804…..Comet 20 Series Belt, 203580A, 29.280” OC,
7 5/8” Center ........................................................................$22.95
Sportech Performance Gearing
15-610…...TT Clutch Kit, 3/4" Bore, 10T..............................................$48.95
SS & TT Clutch Components
Sprockets
15-510…..10T Sprocket w/Drum, 3/4”, #40..........$22.50
15-614…..11T Sprocket w/Drum, 3/4”, #40 ..........$28.95
15-615…..12T Sprocket w/Drum, 3/4”, #40..........$28.95
15-616…..13T Sprocket w/Drum, 3/4”, #40..........$28.95
15-617…..14T Sprocket w/Drum, 3/4”, #40..........$28.95
15-620…..Sprocket & Bushing, 10T ....................$13.95
Drums
15-624…..Drum, 10T, #40 (non-machined) ............................................$6.95
15-625…..Drum, 11T, 12T, 13T & 14T, #40 ............................................$8.95
Shoes
15-660.....SS Style Shoe, ea. ................................................................$2.95
15-662.....TT Style Shoe, ea. ..................................................................$2.95
15-664.....Wedge Style Shoe, ea. ..........................................................$2.95
Springs
15-642.....Blue Spring, .054”, 1800 Engagement* ..................................$6.50
15-644.....Silver Spring, .059”, 2000 Engagement* ................................$6.50
15-646.....Green Racing Spring, 2400 Engagement* ............................$7.25
15-647.....Black Racing Spring, 2800 Engagement* ..............................$8.75
Snap Rings
15-514.....Snap Ring, 10T, #131 ..............................................................$.55
15-626.....Snap Ring, 11T, 12T, 13T & 14T, #156 ....................................$.60
15-640.....Snap Ring, Shoe Retainer Plate ..............................................$.45
Parts
15-622.....Bushing, 3/4” ..........................................................................$2.95
15-518.....Fiber Washer, 3/4” ....................................................................$.30
15-630.....Shoe Retainer Plate ..............................................................$5.95
15-666.....Drive Plate, SS ......................................................................$6.15
15-668.....Drive Plate, TT........................................................................$9.25
15-670.....Hub & Sleeve..........................................................................$8.95
*Engagement shown is SS Clutch engagement.
Gearing Hubs
15-339.....Gearing Hub, XCR 120 ........................................................$46.95
15-340.....Gearing Hub, Mini Z/Rev......................................................$46.95
15-341.....Gearing Hub, Z-120..............................................................$46.95
Sprockets
15-342.....Sprocket, 28T ......................................................................$41.95
15-343.....Sprocket, 30T ......................................................................$41.95
15-346.....Sprocket, 32T ......................................................................$41.95
15-348.....Sprocket, 34T ......................................................................$41.95
15-350.....Sprocket, 36T ......................................................................$41.95
15-351.....Sprocket, 38T ......................................................................$41.95
15-354.....Sprocket, 39T ......................................................................$41.95
15-353.....Sprocket, 42T ......................................................................$41.95
Accessories
15-356…..Quick Change Footwell Kit, (self tapping fasteners)..............$5.99
Sportech
Performance Chain
Able to withstand the abuse of a mini sled, this
chain is less expensive than the D.I.D. Includes
one master link.
15-715…..Performance 420 Chain, 42”................................................$19.95
81
MINI SLED COMPONENTS
True pitch gears that will provide
clean, non-binding performance. CNC
machined from billet aluminum, they
are available in a wide range of sizes
to accommodate a variety of riders,
riding styles and riding/track conditions. Attached with four
bolts, the sprocket can be changed without removing the hub
from the driveshaft. Available for #40 chain. Order components separately.
Mini Sled Components
Order Line 800-883-0294
#35 EK Chain
Bulldozer Hood
This Quality #35 EK Chain is available in
the Silver Pro race quality chain, having
reduced friction as compared to stock. #35 chain is standard
in 5/8” bore Kitty Cats and is sold with one master link. A
deluxe Chain Tool is available to easily adjust #35 chain to
desired length. The highest tensile #35 chain available.
Though the Bulldozer hood may not be a pretty picture, it is beautiful when the bottom is
trimmed to fit stock belly pan or left longer for
running without a belly pan. Windshield sold
separately.
15-252…..Hood, 120 Bulldozer Chassis ............$165.00
15-251…..Windshield, 120 Bulldozer Chassis ....$125.00
Silver Pro Chain
15-704…..#35 Silver Pro Chain, 106 Links (40”) ................................$32.95
15-706…..#35 Silver Pro Master Link ....................................................$2.65
Tool
15-708…..#35 Deluxe Chain Tool ........................................................$29.95
Mini-Mod Hood
A lightweight fiberglass hood designed for
your mod Kitty Cat.
#420 D.I.D. Chain
15-250…..Kitty Cat Hood ....................................$165.00
The #420 D.I.D. Chain features solid
rollers, shot peened components, a special alloy steel material and is 44% stronger than the #40
chain that is stock in the new 120cc series sleds. Master
Links are also sold separately.
Sportech Mini-Tach
The ultimate mini-sled tuning device! You can
accurately record up to 10,000 RPM and monitor your total run time. An excellent way to
find the edge against your competition.
15-710…..#420 D.I.D. Chain, 104 Links ..............................................$32.75
15-712…..#420 Master Links..................................................................$1.95
Heavy Duty Chain Tool
15-390.....Mini-Tach, 4-Stroke ..............................$57.95
This heavily constructed chain tool is
accompanied by a heat treated, hardened
steel tip for tool longevity. This tool also
features a knurled handle for better grip
when using. Will break all chains from 420-530. An excellent
addition to your tool box.
Mini Tank Assembly
Available in 1.5 qt. And 2.5 qt. sizes to
fit your needs. The 1.5 qt. tank comes
as a complete assembly with tank, cap,
clamp and aluminum bracket. Order all
components separately for 2.5 qt. Tank.
15-717…..Heavy Duty Chain Breaker, 420-530 Chain ........................$34.95
Mini Track & Drivers
Tank Assembly
06-932A...Single Tank Assembly, 1.5 qt. ............................................$49.95
Options
06-942…..Fuel Tank, 2.5 qt., 7 3/4” wide x 8 1/2” long x 4” tall ..........$45.00
06-943…..Aluminum Mounting Bracket, 2.5 qt.....................................$15.00
06-934…..Fuel Tank, 1.5 qt., 4 3/4” wide x 6” long x 4” tall (Kitty Cat) $25.50
06-933…..Aluminum Mounting Bracket, 1.5 qt.....................................$14.00
06-940…..Clamp, Single Tank ................................................................$3.50
06-936…..Cap, Small ............................................................................$6.50
Genuine stock OEM replacement track and drivers for the
Polaris 120cc machine.
MINI SLED COMPONENTS
15-060.....Polaris Track, XC-120 ........................................................$201.95
15-062.....Polaris Drive Sprocket, XC 120, ea. ....................................$15.50
Mini Anti Ratchet Drivers
One tooth larger than stock, they are
designed to drive off the track clips instead of
the lugs, which reduces track damage when
using high HP engines. They also reduce
track rolling resistance which equals more
speed using less power (not legal for stock class racing).
Shaft not included.
Mini 120's and Kitty Cat's
Competition accessories designed for the Mini 120's and
Kitty Cats. Children start their racing careers almost as soon
as they can walk. Start them with the best traction products
available.
Studs
15-085.....Anti-Ratchet Drive Wheel, 5-tooth, Polaris, pr. ....................$63.95
15-086.....Anti-Ratchet Drive Wheel, 6-tooth, Arctic Cat, pr. ................$63.95
Push through & t-nut style studs for your
mini racer. Woody’s recommends using
round backers. Oval studs are 30 degree
steel with Sno-X studs being 60 degree
carbide.
Titanium Drive Shaft &
Drive Wheels
This stock dimension titanium drive shaft
weighs half of stock with much greater
strength. Drive wheels are OEM Arctic Cat and come separate from the shaft.
Sno-X
04-276…..Traction Master, GDP6-8750, 24 pc., .875”, Push-Thru ......$50.95
Oval Push-Thru
04-508…..Eliminator Traction Master, GEP-8750, 48 pc., .875” ..........$81.95
04-506…..Eliminator Traction Master, GEP-7500, 48 pc., .750” ..........$81.95
04-504…..Eliminator Traction Master, GEP-7000, 48 pc., .700” ..........$81.95
15-100….Titanium Drive Shaft, Kitty Cat ............................................$115.00
15-102.....Drive Wheel, Kitty Cat ..........................................................$15.65
82
Mini Sled Components
Order Line 800-883-0294
T-Nut Style Studs
PowerMadd Mini-Ski
The 04-594 stud package includes 24 studs, backers
and t-nuts. All are 30 degree.
These skis are the ultimate for Pro
Stock and Open-Mod Drag racing.
The high quality compression
molded ski reduces weight while
increasing strength and durability. Great for Grass Drag racing, these skis are also an excellent performance upgrade for
all Mini Sleds. Some sleds may require fabrication in order to
attach to the spindles. Come with Steel Wear Bar. Order
Saddle Kits separately.
04-599.....Eliminator
04-381.....Eliminator
04-385.....Eliminator
04-594.....Eliminator
Steel
Steel
Steel
Steel
Stud,
Stud,
Stud,
Stud,
GEL-6000, 48 pcs., .600” ....$59.95
GEL-7000, 48 pcs., .700” ....$48.95
GEL-7500, 48 pcs., .750” ....$48.95
DEL-8000, 24 pcs., .800” ....$45.95
T-Nuts
Available in the standard version and also heat treated. The
threaded barrel on the short t-nut is .187” while the others are
.230” long
Skis
03-414…..Silver Plastic Mini-PowerMadd Ski, pr. ..............................$169.95
03-415…..Green Plastic Mini-PowerMadd Ski, pr. ............................$169.95
03-418…..Black Plastic Mini-PowerMadd Ski, pr. ..............................$169.95
03-419…..Blue Plastic Mini-PowerMadd Ski, pr. ................................$169.95
Ski Components
03-424.....PowerMadd Loop Blackout Kit, ea. ......................................$14.95
03-426.....Replacement Ski Hoop, ea...................................................$12.95
04-664…..3/4” T-Nut, Short, ATB-3825, 48pcs. ....................................$8.95
04-666…..3/4” Dished T-Nut, Short, ATD-7500, 48pcs. ......................$29.95
04-660…..3/4” T-Nut, ATR-3750, 48 pcs. ..............................................$8.95
04-661…..3/4” T-Nut, Hardened, ATRH-3750, 48pcs. ..........................$13.95
04-667…..15/16” Dished T-Nut, Short, ATD-9380, 48 pcs. ..................$29.95
Backing Plates
04-634…..Round Aluminum Plate, AWA-3700, 24 pcs.........................$12.95
04-635…..Round Aluminum Plate, AWA-3700-B, 96 pcs. ....................$46.95
Mini-Ski Saddle Kit
03-421…..Saddle Kit, Arctic Z120 ........................................................$39.95
03-422…..Saddle Kit, Polaris XCR 120................................................$39.95
03-423…..Saddle Kit, Ski-Doo Mini-Z ..................................................$39.95
Replacement Wear Bars
03-425.....Steel Wear Bar, pr. ..............................................................$29.95
03-427.....Carbide Wear Bar, 5”, 60 Degree Carbide, pr. ....................$54.95
03-428.....Carbide Wear Bar, 3”, 120 Degree Carbide, pr. ..................$34.95
Carbides
Available for Kitty Cats and 120’s.
All are 60 degree carbides and
are available in 4”, 5” and 6”
depending on model. Additional
holes in ski may be required. Oval
runners may be adapted to other brand skis. Sold as pairs.
Sno-Cross
TM24 Mikuni Carburetor
04-581…..Carbide Runner, SXP-1200, 4” Polaris ................................$70.95
04-589…..Carbide Runner, SXA-1200, 4” Arctic ..................................$70.95
04-591…..Carbide Runner, SXS-1200, 4” Ski-Doo ..............................$70.95
This carburetor is an excellent choice for many
different applications. The Mikuni flat slide carbs
offer better atomization of fuel, and use jets that
are readily available.
Oval
Runner,
Runner,
Runner,
Runner,
Runner,
SXP-1200, 4” Polaris ................................$70.95
CAT-3000, 5” Arctic ..................................$84.95
CAT-4000-1, 6” Arctic ..............................$84.95
MIN-6000, 5” Ski-Doo ..............................$84.95
MIN-5000, 4”& 6” Ski-Doo ........................$84.95
06-105…..Mikuni Carburetor, TM24, ea. ............................................$141.75
Governor By-Pass Kit
USI Carbides
A simple kit that eliminates the effect of the governor while
keeping intact.
The 10” carbide runner designed for USI's Flatliner racing ski
can be shortened to any length desired. Sold in pairs.
04-931…..Carbide Runner, USI-1060, 10”-60 Degree ......................$139.95
04-930…..Carbide Runner, USI-1070, 3”-120 Degree ........................$45.00
15-363…..Governor By-Pass Kit, Polaris ..............................................$6.95
15-364…..Governor By-Pass Kit, Arctic ................................................$6.95
15-365…..Governor By-Pass Kit, Ski-Doo ............................................$6.95
Mini Champ Ski
Fox Float R Shocks
Extruded aluminum IFS Skis in 12”
and a 20” stock length. Ski spindle
width is 2 1/4” but can be adapted to
Kitty Cat or Mini 120's. The ski comes complete with hoop.
Sold individually.
This incredibly light, best performing oil
dampened air shock that the market
has to offer keeps getting better and is
finding its way into the snowmobile
market via the racing scene. Available
in two lengths, the 6.5” weighs only .44 lbs., and the 7.875”
weighs only .55 lbs. The Fox R shock has adjustable
rebound. The 6.5” shock has 1.5” of travel and the 7.875”
shock has 2” of travel. These shocks are designed to be
used in mini sled applications or in application where shorter
lengths are desired. Sold individually.
Skis
15-120A...Extruded Ski, Assy, 12”, ea. ..............................................$125.00
15-121A...Extruded Ski, Assy, 20”, ea. ..............................................$125.00
Components
15-122.....Mini-Ski Hoop, 12” ski ..........................................................$16.95
15-123.....Mini-Ski Hoop, 20” ski ..........................................................$16.95
11-329…..Mini Fox Float R Shock, 6.5" Length, 1.5” travel, ea. ........$254.95
11-333…..Mini Fox Float R Shock, 7.875" Length, 2” travel, ea. ......$254.95
83
MINI SLED COMPONENTS
04-581…..Carbide
04-595…..Carbide
04-587…..Carbide
04-597…..Carbide
04-598…..Carbide
MINI SLED COMPONENTS/APPAREL
Mini Sled Components/Apparel
Order Line 800-883-0294
Fox MXR Float Shocks
B-Wear Protective Gear
Wahl Brothers Racing has teamed up
with Fox shocks to bring you the lightest, most adjustable shock in the snowmobile market place. The FLOAT MXR
shock is an ultra light shock that weighs only 1.1 lbs. at
10.25”. The new Float Shock has many new features, including AVA, a technology that incorporates new levels of finetuning adjustment. AVA increases or decreases the volume of
the positive air in the spring chamber. This allows the rider to
alter the shape of the spring curve. AVA allows as much as
200 lbs. of adjustment in spring rate. Instead of using an
external spring, the internal air chamber can be adjusted with
an included air pump.
Available in two standard lengths, you can add shaft
extensions to get you to your desired length. The 10.25” can
be taken to 15” and the 9.5” shock can be lengthened out to
13.5”. Shocks come with all necessary hardware. Purchase
extensions separately.
Protective vests are just as important as
your helmet is. These specially designed
protective vests protect the upper arm,
ribs, abdomen, shoulder and collarbone,
spinal column and kidneys. Composed
of a high density, well ventilated foam,
the vests are extremely comfortable to wear. It doesn't matter
if you ride competitively or just for fun, protect yourself with BWear. Durable, adjustable and washable. Measure around
your chest for proper fit.
Shocks
11-337A…Fox Shock, Float, MXR, 9.5", pr. ......................................$620.00
11-343A…Fox Shock, Float, MXR, 10.25'', pr. ..................................$620.00
Pump
11-341…..Fox High Pressure Pump with Bleed ..................................$30.00
With a high-impact plastic shell and EVA
foam lining, these elbow guards are highly recommended. Dual elastic straps hold
them in place. Sold in pairs.
Apparel
17-190…..Comp Elbow Guards, Youth ................................................$21.95
17-191…..Comp Elbow Guards, Adult..................................................$23.95
Super Seer Face Shield
The Leatt-Brace is an injection
produced glass reinforced nylon
or carbon fiber and Kevlar neck
brace system designed by medical professionals to help prevent
extreme head movement while
participating in motor sport activities. The Sport model is constructed of GRN (glass reinforced
nylon) on the lower section and Carbon Fiber on the upper
section making it slightly lighter (780g) in weight compared to
the Club model (850g) which is construction of GRN in both
the upper and lower sections. Both offer equal protective
properties. Size small is recommended for boys age 4-16 and
ladies, medium size is recommended for all other.
17-178…..B-Wear
17-180…..B-Wear
17-182…..B-Wear
17-184…..B-Wear
17-186…..B-Wear
17-188…..B-Wear
Protective
Protective
Protective
Protective
Protective
Protective
Gear,
Gear,
Gear,
Gear,
Gear,
Gear,
Junior, 18”-30”............................$195.00
Small, 30”-36” ............................$249.00
Medium, 36”-40” ........................$249.00
Large, 40”-44” ............................$249.00
X-Large, 44”-48” ........................$249.00
XX-Large, 48”-52” ......................$269.00
Elbow Guards
Leatt MOTO GPX & Club
The shield most used by oval and cross
country racers. Super Seers double
lens shield works like a storm window
by keeping dead air space between the
inner and outer lenses. This helps eliminate fogging and freezing. Available in a standard 5 1/2”
length or a long 7” length. Snaps are also available for your
helmet.
Standard Vari Shield
17-002... ..Super Seer Shield, Standard, Clear ....................................$33.95
17-003... ..Super Seer Shield, Standard, Smoke ................................$35.95
17-004... ..Super Seer Shield, Standard, Gradient ..............................$35.95
Long Vari Shield
17-006... ..Super Seer Shield, Long, Clear ..........................................$35.95
17-007... ..Super Seer Shield, Long, Smoke........................................$37.95
17-008... ..Super Seer Shield, Long, Gradient ....................................$37.95
17-175.....MOTO
17-177.....MOTO
17-171.....MOTO
17-173.....MOTO
Snaps
Stainless Steel 9/16” Diameter stud can be
riveted to your helmet for shield fastening or
for riveting seat fasteners to your tunnel.
17-010... ..Stainless Steel Snap, Male, ea. ..............................................$.30
17-011A....Stainless Steel Snap with Rivets, Male, 3pcs. ......................$1.50
14-462... ..Closed End Aluminum Rivet, 1/8”, .300” long, 25pcs............$3.00
84
GPX
GPX
GPX
GPX
Club Leatt Brace, Small ................................$395.00
Club Leatt Brace, Medium ............................$395.00
Sport Leatt Brace, Small ................................$440.00
Sport Leatt Brace, Medium ............................$595.00
Apparel/Miscellaneous
Order Line 800-883-0294
Leatt ADVenture
Wahl Zip-Front
Hooded Sweatshirts
The Leatt® ADVenture is an injection
molded glass reinforced nylon neck
brace system. The design of the
Leatt® ADVenture prevents the helmet/head from projecting over the
brace and therefore prevents a fulcrum action, which has been documented in literature pertaining to the use of collar devices.
The Leatt® ADVenture works with most types of body armor
and chest protectors. Over long distances, the Leatt®
ADVenture will also offer some relief from neck fatigue. The
Leatt® ADVenture is compatible with all motorcycle helmet
types and our design allows riders an adequate range of
movement. Size small is recommended for boys age 4-16
and ladies, medium size is recommended for all other.
A Wahl Brothers 12 oz. Zip-Front
Hooded Sweatshirt to help you keep
the cold out and the heat in. Get one
for yourself or your favorite race fan. They sport a screenprinted front pocket logo and an enlarged version on the
back.
Black Zip-Up Sweatshirts
17-755…..Black Zip-Up Hooded
17-756…..Black Zip-Up Hooded
17-757…..Black Zip-Up Hooded
17-758…..Black Zip-Up Hooded
17-759…..Black Zip-Up Hooded
Sweatshirt,
Sweatshirt,
Sweatshirt,
Sweatshirt,
Sweatshirt,
Small..............................$40.00
Medium ..........................$40.00
Large..............................$40.00
XL ..................................$40.00
2XL ............................$40.00
17-196....Leatt Adventure Brace, Small..............................................$285.00
17-198....Leatt Adventure Brace, Medium ..........................................$285.00 .
Wahl Hooded Sweatshirts
Wahl Racing Caps
A Wahl Brothers 12 oz. Hooded Sweatshirt to help you keep
the cold out and the heat in. Get one for yourself or your
favorite race fan. They sport a screenprinted front center logo
and an enlarged version on the back.
These baseball style caps are high quality with an embroidered logo.
17-543…..Red/Black Logowear Cap ....................................................$20.00
17-546......Black Logowear Cap ..........................................................$20.00
Wahl Stocking Hats
60% cotton, 40% acrylic hats with embroidered logo. One
size fits most.
Black Hooded Sweatshirts
17-741…..Black Hooded Sweatshirt,
17-742…..Black Hooded Sweatshirt,
17-743…..Black Hooded Sweatshirt,
17-744…..Black Hooded Sweatshirt,
17-745…..Black Hooded Sweatshirt,
Small..........................................$40.00
Medium ......................................$40.00
Large ........................................$40.00
XL ..............................................$40.00
2XL ............................................$40.00
Grey Hooded Sweatshirts
17-748…..Grey Hooded Sweatshirt,
17-749…..Grey Hooded Sweatshirt,
17-750…..Grey Hooded Sweatshirt,
17-751…..Grey Hooded Sweatshirt,
17-752…..Grey Hooded Sweatshirt,
Small ..........................................$40.00
Medium ......................................$40.00
Large ..........................................$40.00
XL ..............................................$40.00
2XL ............................................$40.00
For more Logo Wear Items visit www.wahlracing.com
17-540…..Red/Black Logowear Beanie................................................$15.00
17-541…..Red/Black Logowear Hat with Cuff ......................................$15.00
17-542…..Black Logowear Hat with Cuff ........................................$15.00
Miscellaneous
The International Snowmobile Racing Yearbook covers all the
current rules and rule changes for all snowmobile racing venues. This book is the latest information available anywhere
on snowmobile racing.
17-500…..ISR Racing Yearbook ............................................................$7.95
85
APPAREL/MISCELLANEOUS
ISR Racing Yearbook
Wahl Bros. Drag Chassis
The Wahl Bros. Drag Chassis is custom built to suit your application. Featuring an
Independent Front Suspension with Fox MXR Float Shock absorbers or in a vintage leaf
spring version. This is a great machine for Ice, Snow or Grass! In addition your chassis will
also include:
Titanium Shafts
9 or 10 Tooth Drive Sprockets
Billet Oil Bath Chaincase
Dual Hydraulic Drive Shaft Brakes
Nose Cone Hood
Motorplate
Fuel Tank
Seat
86
Terms and Conditions
Ordering
Hours
Orders may be placed by phone, fax, e-mail, mail or on our
website. Be sure to double check all information before submitting your order. Fax line is open 24 hours a day.
Winter office hours (October-February) are 8:30 a.m. to 5:30
p.m. CST Monday through Friday. Summer hours (MarchSeptember) are 8:30 a.m. to 5:00 p.m. CST Monday through
Friday.
Payment
Back-Ordered Parts
Wahl Bros. Racing accepts Visa, MasterCard, Discover and
American Express credit cards as method of payment.
Orders may be shipped C.O.D. but you must have an established credit history in order to do so. Any C.O.D. order over
$500.00 must be paid by certified check or money order upon
delivery. Oversized orders that ship via common carrier truck
must be prepaid prior to shipping. All international orders
must be prepaid by credit card or certified check/money order
prior to shipping.
Items not in stock at time of shipment will be placed on backorder status. Back-ordered items will be shipped as they
become available. Customer bears sole responsibility to cancel backorders if they wish to do so. Customers are responsible for all freight and handling charges.
International Customers
All Canadian and overseas shipments must be paid by credit
card or prepaid with certified check or money order before
shipment. All purchases are to be paid in U.S. Funds only.
Shipping
All orders will be shipped SpeeDee (where available), FedEx
or UPS unless otherwise requested. The carrier assumes
responsibility for all items in transit. Title of merchandise
passes to the customer upon delivery to the carrier. All losses
or damages are to be reported immediately to the carrier by
the customer upon delivery. Shortages or incorrect items
received must be reported within 3 days of receipt.
Pricing
All prices listed are in U.S. Funds and are subject to change
without notice due to increases in material costs, production
costs, and special tooling changes. We make every effort to
hold our prices and ensure competitive pricing. Minnesota
residents add 6.875% sales tax to order total. Minnesota
sales tax will be added to all orders that are shipped in-state
or picked up at our facility.
Warranty
Wahl Bros. Racing offers no express, implied, or statutory
warranty on items manufactured or services performed.
Purchased items manufactured by companies other than
Wahl Bros. Racing may carry their own warranty.
Dealers
Only registered dealers with approved applications on file
with Wahl Bros. Racing at the time of the order will receive
dealer pricing. Dealers must have a Sales Tax Exempt
Certificate on file with Wahl Bros. Racing. Dealer status will
be reviewed annually. Wahl Bros. Racing reserves the right
to revoke dealer status at its sole discretion.
Returns
You may return new, unused parts within 30 days for
exchange or in-store credit. You must call for an RGA (return
goods authorization) number prior to returning anything. Any
items returned after 30 days are subject to a 15% restocking
fee. Returns will not be accepted after 60 days. Returned
items must be in new, unused condition. An original invoice
copy must accompany all returns. Refused COD’s are subject to collection.
Contact Info
Wahl Bros. Racing, Inc.
16860 State Hwy 11
Greenbush, MN 56726
Phone (218)782-2295
Fax (218)782-2297
E-Mail: [email protected]
Web Site: www.wahlracing.com
87
Index
A
Air Density Gauge . . . . . . . .38, 78
Apparel . . . . . . . . . . . . . . . . .84, 85
Asphalt Skis . . . . . . . . . . . . . . . .30
Axle Bushing . . . . . . . . . . . . . . .12
Axle Conversion . . . . . . . . . . . . .12
Axle Bearings . . . . . . . . . . . . . . .17
Air Box Fittings . . . . . . . . . . . . . .43
E
Elbow Guards . . . . . . . . . . . . . . .84
Electrical Parts . . . . . . . . . . . . . .76
Energy Release . . . . . . . . . .61, 62
Engine Push Arm . . . . . . . . .68, 69
Exhaust Springs . . . . . . . . . . . . .69
Exhaust Spring Tools . . . . . . . . .78
Exhaust Wrap . . . . . . . . . . . . . . .69
B
Battery, 12V DC Gel Cell . . . . . .76
B-Wear Protective Gear . . . . . .84
Bearings . . . . . . . . . . . . . . . .11, 17
Bearing, Holder . . . . . . . . . . . . .18
Belt Adjuster . . . . . . . . . . . . . . . .47
Belts . . . . . . . . . . . . . . . . . . .54, 55
Bend-A-Light . . . . . . . . . . . . . . .78
Boost Bottle . . . . . . . . . . . . . . . .43
Brake Calipers . . . . . . . . . . .58, 59
Brake Disc . . . . . . . . . . . . . . . . .59
Brake Fluid . . . . . . . . . . . . . . . . .63
Brake Hub . . . . . . . . . . . . . . . . .59
Brake Line . . . . . . . . . . . . . . . . .60
Brake Lever . . . . . . . . . . . . . . . .58
Brake Master Cylinder . . . . . . . .57
Brake Pads . . . . . . . . . . . . . .58, 60
Bushing, Clutch . . . . . . . . . .45, 47
Bushings, Bronze . . . . . . . . . . . .67
F
Fiberglass Hoods . . . . . . . . . . . .77
Filler Neck . . . . . . . . . . . . . . . . .42
Filter, Fuel . . . . . . . . . . . . . . . . . .42
Filter, K & N . . . . . . . . . . . . . . . .39
Filter, UNI . . . . . . . . . . . . . . . . . .40
Filter, Pre-Filter Foam . . . . . . . .40
Fitch Fuel Catalyst . . . . . . . . . . .63
Fittings, Gas Tank . . . . . . . . . . . .42
Flange, Carburetor . . . . . . . . . . .35
Foot Rest . . . . . . . . . . . . . . . . . .65
Formula 500 Components . . . . .70
Fox Shocks . . . . . . . . . . . . .30, 71
Fox Shock Service Tools . . .71, 80
Front Arm Susp. Adjuster . . . . . . .5
Fuel Cap . . . . . . . . . . . . . . . .41, 42
Fuel Fittings . . . . . . . . . . . . . . . .42
Fuel Line . . . . . . . . . . . . . . . . . . .42
Fuel Pump . . . . . . . . . . . . . . . . .43
Fuel Shut-Off Valves . . . . . . . . .43
Fuel Tanks . . . . . . . . . . . . . . . . .41
Fuel Pump Primer Kits . . . . . . . .43
Fuel Pump Repair Kits . . . . . . . .43
Fyre Jacket . . . . . . . . . . . . . .42, 69
C
Cable Zip Ties . . . . . . . . . . . . . .69
Camoplast Tracks . . . . . . . .12, 13
Camoplast Track Clips . . . . . . . .13
Carbide Grinder Stand . . . . . . . .28
Carbide Runners . . . . . . . . .27, 28
Carburetors . . . . . . . . . . . . .33, 34
Carb Flange . . . . . . . . . . . . . . . .35
Carb Parts . . . . . . . . . . . . . . .34-38
Carb Slides . . . . . . . . . . . . . .37, 38
Caps, Fuel . . . . . . . . . . . . . .41, 42
Caps, Sparkplugs . . . . . . . . . . . .73
Chain Case . . . . . . . . . . . . . . . . .18
Chain Lube . . . . . . . . . . . . . . . . .62
Chains . . . . . . . . . . . . . . . . .21, 22
Chain Tensioner . . . . . . . . . . . . .22
Choke Cable . . . . . . . . . . . . . . . .41
Chokes . . . . . . . . . . . . . . . . . . . .35
Cleaning Products . . . . . . . .62, 63
Cleated Suspensions . . . . . . . . . .4
Cleated Tracks . . . . . . . . . . . . . .14
Clips, Track . . . . . . . . . . . . . . . . .13
Clothing . . . . . . . . . . . . . . . . . . .85
Clutch, Drive . . . . . . . . . . . . .44, 45
Clutch, Drive Service Parts . .44-46
Clutch, Drive Springs . . . . . .49, 50
Clutch, Drive Bolts/Washers .46, 47
Clutch, Driven . . . . . . . . . . . .51-53
Clutch Rollers . . . . . . . . . . . .44, 46
Clutch Springs . . . . . . . . . . .49, 50
Clutch Spring Tester . . . . . . .50, 78
Clutch Tools . . . . . . . . . .53, 55-57
Clutch Weights . . . . . . . . . . .47, 48
Coil Over Adapter Kit . . . . . . .7, 73
Comet Clutches . . . . . . . . . .45, 46
Connectors . . . . . . . . . . . . . . . . .76
Cross Shafts . . . . . . . . . . . . . . . . .5
D
Degree Wheel . . . . . . . . . . . . . .78
Delrin Washers . . . . . . . . . . . . . .53
Dial-A-Jet . . . . . . . . . . . . . . . . . .38
Digitron Gauges . . . . . . . . . . . . .75
Disc, Brake . . . . . . . . . . . . . . . . .59
Drain Thing . . . . . . . . . . . . . . . . .64
Drive Belts . . . . . . . . . . . . . .54, 55
Drive Axle Collar/Locking Hub . .16
Drive Shafts . . . . . . . . . . . . . . . .17
Drive Sprockets/No-Slips . . .14, 15
Drive Sprockets, Involute . . . . . .15
Drive Wheels Aluminum . . . . . . .15
Driven Clutch . . . . . . . . . . . . .51-53
Duct Tape . . . . . . . . . . . . . . . . . .66
Dummy ClutchTool . . . . . . . . . . .55
M
Main Jets . . . . . . . . . . . . . . .35, 36
Master Cylinder . . . . . . . . . . . . .57
Max Clip for Polaris Clutch . . . . .44
Max-Torque . . . . . . . . . . . . .80, 81
Mini 120 Parts . . . . . . . . . . . . . .80
Mini 120 Stud/Carbides .28, 82, 83
Mixing Cups . . . . . . . . . . . . . . . .63
Motor Mounts . . . . . . . . . . . . . . .68
N
Needle Jet . . . . . . . . . . . . . . . . .36
Needle & Seat . . . . . . . . . . . . . .36
NGK Spark Plugs . . . . . . . . . . . .73
No-Slip Drive Sprockets . . . .14, 15
Nuts, Jam . . . . . . . . . . . . . . . . . .31
O
Oil . . . . . . . . . . . . . . . . . . . . . . . .61
Octane Booster . . . . . . . . . . . . .62
P
Pilot Jets . . . . . . . . . . . . . . . . . . .35
Pocket Tuner . . . . . . . . . . . . . . .38
Polaris F-500 Brakes. . . . . . . . . .70
Polaris F-500 Chain Case. . . . . .70
Polaris F-500 Engine Comp.. . . .70
Polaris F-500 Front Susp. . . . . .70
Polaris F-500 Rear Susp. . . . . . .70
Power Jet Kit . . . . . . . . . . . . . . .43
Power-Lift Snowmobile Stand . .79
Pre-Filter . . . . . . . . . . . . . . . . . . .40
Primer Kit . . . . . . . . . . . . . . . . . .43
Pullers, Clutch . . . . . . . . . . . . . .56
Pull Rope . . . . . . . . . . . . . . . . . .69
Pumps, Fuel . . . . . . . . . . . . . . . .69
G
Gauge, Digitron . . . . . . . . . . . . .75
Gauge, EGT . . . . . . . . . . . . . . . .74
Gauge, Race Pak . . . . . . . . . . . .74
Gauge, Water Temp . . . . . . . . . .64
Gears . . . . . . . . . . . . . . . . . .18-21
Grease . . . . . . . . . . . . . . . . . . . .62
Green Wheel . . . . . . . . . . . . . . .28
Grinding Block, Ramp . . . . .51, 79
Q
Quick Couplers . . . . . . . . . . .42, 64
R
RacePak Gauges . . . . . . . . . . . .74
Racers Tape . . . . . . . . . . . . . . . .66
Radiator . . . . . . . . . . . . . . . . . . .63
Ratio Rite . . . . . . . . . . . . . . . . . .63
Rear Close Off . . . . . . . . . . . .7, 65
Red Line Assembly Lube . . . . . .62
Red Line Oil . . . . . . . . . . . . . . . .61
Red Line Water Wetter . . . . . . . .63
Reed Spacer Kit . . . . . . . . . . . . .43
Rectifier . . . . . . . . . . . . . . . . . . .76
Rivets . . . . . . . . . . . . . . . . . .65, 66
Rod Ends . . . . . . . . . . . . . . .31, 32
Rollers, Clutch . . . . . . . . . . . . . .46
H
Hand Taps . . . . . . . . . . .31, 67, 79
Handlebars . . . . . . . . . . . . . .32, 68
Handlebar Grips . . . . . . . . . .33, 68
Handlebar Hooks . . . . . . . . . . . .33
Handlebar Riser Kit . . . . . . . . . .33
Handlebar Tape . . . . . . . . . .33, 68
Heavy Hitter Weights . . . . . . . . .49
Heel Clicker . . . . . . . . . . . . . . . .49
Helixes . . . . . . . . . . . . . .51, 52, 54
Hex Hubs . . . . . . . . . . . . . . . . . .16
Hoods . . . . . . . . . . . . . . . . . . . . .77
Hooker Plates . . . . . . . . . . . .24, 27
Hose Clamps . . . . . . . . . . . . . . .65
Hyfax . . . . . . . . . . . . . . . . . . . . . .8
HYVO Chain & Gears . . . . . . . .20
S
Safety Wire . . . . . . . . . . . . . .70, 79
Scale, Gram . . . . . . . . . . . . . . . .78
Scale, Tension . . . . . . . . . . . . . .79
Seats . . . . . . . . . . . . . . . . . . . . .70
Shield . . . . . . . . . . . . . . . . . . . . .84
Shims, Clutch . . . . . . . . . . . . . . .46
Shocks . . . . . . . . . . . . . .30, 71, 72
Shock Oil . . . . . . . . . . . .63, 71, 72
Shock Springs . . . . . . . . . . . . . .72
Shock Tools . . . . . . . . . . .7, 71, 72
Silencers . . . . . . . . . . . . . . . . . . .69
Siphon Pump . . . . . . . . . . . . . . .80
Ski Boots . . . . . . . . . . . . . . . . . .29
Skis . . . . . . . . . . . . . . . . . . . . . . .29
Slides, HiperFax . . . . . . . . . . . . . .8
Slides, UHMW . . . . . . . . . . . . . . .8
Slides, Super Slippery . . . . . . . . .8
Snow Flap . . . . . . . . . . . . . . .7, 65
Spark Plugs . . . . . . . . . . . . . . . .73
Spark Plug Wires . . . . . . . . . . . .74
Spindles . . . . . . . . . . . . . . . . . . .32
Spring, Front Arm . . . . . . . . . . . . .5
Spring, Leaf . . . . . . . . . . . . . . . .29
Spring, Suspension . . . . . .6, 7, 72
Spring Tester . . . . . . . . . . . .50, 78
Spring, Torsion . . . . . . . . . . . . . . .2
Sprockets, Anti-Ratchet . . . .14, 15
Sprockets, Drive . . . . . . . . . . . . .15
SLP Push Arm . . . . . . . . . . . . . .68
I
Idler Wheels . . . . . . . . . . . . . . . .11
Inserts, Idler Wheels . . . . . . . . .12
Impulse Line/Fittings . . . . . . . . .42
J
Jackshafts . . . . . . . . . . . . . . . . . .16
Jackstand . . . . . . . . . . . . . . . . . .79
Jet Needles . . . . . . . . . . . . .36, 37
K
K & N Filters . . . . . . . . . . . . . . . .39
K & N Filter Servicing . . . . . . . . .39
K & N Precharger . . . . . . . . . . . .40
Klotz . . . . . . . . . . . . . . . . . . . . . .61
Kill Switches . . . . . . . . . . . . . . . .76
L
Lanyard Cable . . . . . . . . . . . . . .76
Leatt Braces . . . . . . . . . . . . .84, 85
Light, Taillight/Brake . . . . . . . . . .76
Lube Kit . . . . . . . . . . . . . . . . . . .41
Lube System . . . . . . . . . . . . . . . .3
Lubricants . . . . . . . . . . . . . . . . . .22
88
SLP Boost Bottles . . . . . . . . . . .43
SLP Clutch Components . . . . . .50
SLP Clutch Tools . . . . . .56, 57, 79
Steering Arm . . . . . . . . . . . . .32, 68
Steering Hoop . . . . . . . . . . .33, 68
Steering Post . . . . . . . . . . . . . . .68
Steering Post Support Block 32, 68
Stud Bolts . . . . . . . . . . . . . . . . . .23
Stud Cutter . . . . . . . . . . . . . . . . .27
Stud Hooker Plate/Washers .24, 27
Stud, Lock Nuts . . . . . . . . . . . . .24
Stud, Support Plates . . . . . .25, 26
Stud, T-Nuts . . . . . . . . . . . . . . . .23
Stud Tools . . . . . . . . . . . . . . .26, 27
Stud, Picks/Chisels . . . . . . . .22, 23
Studs, Push Through . . . . . .24, 25
Super Seer Shield . . . . . . . . . . .84
Suspension, Asphalt . . . . . . . . . . .4
Suspension, Cleated Ice . . . . . . .4
Suspension, Grass/Ice . . . . . . . . .2
Suspension, Lube System . . . . . .3
Suspension, Oval Race . . . . . . . .3
Suspension, Rubber Track . . . . . .1
T
Taillight . . . . . . . . . . . . . . . . . . . .76
Tachometers . . . . . . . . . . . . . . . .75
Tanks . . . . . . . . . . . . . . . . . . . . .41
Tape, Handlebar . . . . . . . . . . . . .33
Tape, Duct . . . . . . . . . . . . . . . . .66
Tape, Non/Skid . . . . . . . . . . . . . .66
Tape, Heat Foil . . . . . . . . . . . . . .66
TEAM Clutch . . . . . . . . . . . . . . .53
Temp Gauge . . . . . . . . . . . . . . . .64
Tether Switch . . . . . . . . . . . . . . .76
Throttle Block . . . . . . . . . . . . . . .40
Throttle Cables . . . . . . . . . . .40, 41
Throttle Levers . . . . . . . . . . . . . .40
Thunder Shift Kit . . . . . . . . . . . .49
Timing System . . . . . . . . . . . . . .75
Tools . . . . . . . . . . . . . . .13, 14, 78
Torque Arms . . . . . . . . . . . . .68, 69
Torque Link . . . . . . . . . . . . . . . . . .7
TPI Valve . . . . . . . . . . . . . . . . . .43
Torsion, Bar/Arm . . . . . . . . .32, 67
T-Nuts . . . . . . . . . . . . . . . . . . . . .23
Tracks . . . . . . . . . . . . . . . . . .12, 13
Track Clips . . . . . . . . . . . . . . . . .13
Track Tools . . . . . . . . . . . . . .13, 79
Traction Products . . . . . . . . .22-28
Tunnel Extension . . . . . . . . . . . .65
Tunnel Protectors . . . . . . . . . .7, 70
U
UFO . . . . . . . . . . . . . . . . . . . . . .38
Ultra Hooks & Levers . . . . . . . . .33
UNI Filters . . . . . . . . . . . . . . . . .40
V
V-Force Reeds . . . . . . . . . . . . . .38
Velcro . . . . . . . . . . . . . . . . . . . . .70
Vent . . . . . . . . . . . . . . . . . . . . . .77
Voltage Regulator . . . . . . . . . . . .76
W
Washers, Delrin . . . . . . . . . . . . .53
Wheel Kit, Asphalt . . . . . . . . . . .11
Wheel Kit, Anti-Stab . . . . . . . . . .11
Wheel Kit, Lightweight . . . . . . . .10
Wheel Kit, Plastic/Rubber . . . . .10
Wheel Kit, Stock . . . . . . . . . . . . .11
Wheel Kit, Sure Stick . . . . . . . . .11
Wheel Kit, Lightweight . . . . . . . .11
Wheel Kit, Wear Resistant . . . . . .9
Wheels, Billet Aluminum . . . . . . .11
Wheels, Lightweight . . . . . . . . . .11
Wheels, Wear Resistant . . . . . . .11
Windshields . . . . . . . . . . . . . . . .77
Wires, Racing/Hot . . . . . . . . . . .74
Y
Yearbook, ISR . . . . . . . . . . . . . .84
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement