- No category
advertisement
3M
™
Scotch-Weld
™
Hot Melt Bonding Systems
4
2
3
1
Assembly
& packaging
Reference guide
Speed and versatility for applications success
3
Applications Success with 3M
™
Scotch-Weld
™
Hot Melt Adhesives
Do 3M ™ Scotch-Weld ™ Hot Melt Adhesives offer the best options for success with your assembly and/or closure application?
Answers to the following questions can help you decide.
Would you like to improve your production speed and ease?
3M ™ Scotch-Weld ™ Hot Melt Adhesives liquefy when heated and quickly fill gaps and wet the bonding surface. Applied to only one surface, they cool, harden, and reach bond strength in seconds. You can move assemblies immediately and eliminate clamps, fixturing, and drying time and energy. Each adhesive is engineered for efficient application with an easy-to-use 3M portable applicator. Minimal operator training.
Would you like to improve appearance?
Unlike mechanical fasteners and sealing tapes, hot melt adhesive is virtually invisible between the mating surfaces.
What surfaces do you want to combine?
As you can see on pages 4 and 5, you can combine a wide variety of materials ranging from wood to corrugated cardboard, and even heat-sensitive foam.
How much strength do you need?
Select from a wide range of non-structural shear and peel strengths as shown on page 7. Structural strength has been defined as a minimum of 1,000 psi in overlap shear to permanently bond load-bearing components. Hot melt non-structural applications range from case sealing to bonding wood stiffeners to drawer bottoms, and securing components on a PC board.
What is the temperature in the end use environment?
Hot melts are 100% solids thermoplastic resins that can re-melt after bonding if exposed to high enough temperature.
As you can see on page 7, there are many options for selecting melt point and heat resistance for your specific application.
Do you need to reposition parts or delay assembly after adhesive application?
Open time or bonding range is the maximum time between applying adhesive and joining the surfaces. The more quickly you join surfaces, the better the wetting action and bond. With
3M ™ Scotch-Weld ™ Hot Melt Adhesives you have wide latitude in bonding range selection as shown on page 7.
5
6
Application Success:
7
Electronics and Electrical
• Easily secure wires to resist strain and breakage
• Rigidize components on printed circuit boards to add stability during assembly, shipping and end use
• Quick setting for potting even at great depth
• Terminate coils
• Cable strain relief
• Bundle wires for convenient handling
8
Go to adhesives
3748VO: Light yellow, non-corrosive to copper, self extinguishing
3779: Amber, high heat resistance, high strength
Alternatives
3748: Off-white, non-corrosive to copper
3764: Clear, bonds HSE/LSE plastics
3797: Off-white, good for potting
Application Success: Application Success:
2
9
14
15
10
11
12
16
Adhesive
13
Point-of-Purchase,
Displays, Trade Exhibits
• Bond foam spacers into 3-dimensional corrugated cardboard POP display
• Attach samples of wood flooring, laminates, foams, fabric, or other materials and small products to display board
• Attach decorations to baskets
• Assemble dried floral arrangements
• Bond polystyrene foam and other materials used in counter top displays, jewelry cases, and exhibitor booths
Manual and Corrugated
Carton Sealing
17
• Bond and seal any size and configuration of corrugated carton quickly and invisibly including RSCs, FOLs, and
5-panel folded
• Securely bond lightly waxed surfaces that may be difficult for tape to seal
• Attach inserts including heat-sensitive foam
• Self-contained portable applicator saves the cost of bulk equipment for recouperage, manual random size case sealing, and many contract packaging situations
Go to adhesives
3762LM: Light amber, fast-setting, low melt for heat sensitive surfaces
3792LM: Clear, multi-purpose low melt for heat sensitive surfaces
Alternatives
3748: Off-white, bonds polyolefins
3755LM: Clear, delayed tack, applied as ribbon for paper, corrugated
3764: Clear, bonds HSE/LSE plastics
Go to adhesives
3762: Economical, tan, fast-setting with “hot tack”
3762LM: Light amber, low melt version of 3762
Alternatives
3738: Tan with high delivery rate, longer open time than 3762
3750: Tan, low viscosity for high flow
3764: Clear, stays flexible at low temp
Application Success: Application Success:
22
18
23
24
19
20
21
Furniture and
Woodworking
• Wood to wood assembly of non-structural components in home and office furniture and cabinetry
• “Third-hand” holding components while structural wood adhesive cures
• Bond fabric to wood for welting and gimping
• Secure drawer bottoms, guides, and stiffeners
• Attach upholstery to wood and plastic
• Assemble decorative crown moldings
Go to adhesives
3792: Clear, multi-purpose for wood, fabric, and upholstery
3792LM: Low melt version of 3792 for heat sensitive surfaces
Alternatives
3738: Tan, high delivery rate
3747: Tan, bonds variety of wood, plastics, and lightweight metal
3789: Brown, impact resistant
Product
Assembly
25
• Bond metal or plastic nameplates to trophies
• Assemble or repair foundry sand cores
• Attach removable credit cards or samples to mailers
• Quick easy assembly of many materials in luggage and carrying cases
• Assemble many materials used in novelties, toys, games, and costumes
• Attach speaker fabric or protective metal grille
Go to adhesives
3764: Clear, bonds HSE/LSE plastics, flexible at low temp
3792LM: Clear, multi-purpose low melt for heat sensitive surfaces
Alternatives
3748: Off-white, resists thermal shock, bonds polyolefins
3796: Tan, hi-performance on thin metal
3798LM: Clear removable “gummy glue”
3
Substrate Combinations for Applications Success
Substrate
Wood
Thin Metal
Glass or ceramic
Vinyl
Wood Thin Metal Glass or ceramic
Vinyl
3747 3776LM 3747 3776LM 3747 3792LM 3789
3789 3762LM 3796
3738 3792LM
3750LM
3764
3796
3779
3796
3747 3776LM 3747 3776LM 3796
3796 3796
3747 3792LM 3796
3764
3796
3789
3779
3796
Leather
N/R
N/R
N/R
N/R
Leather
3789
3779
3796
3796
3796
N/R
N/R
N/R
3789
3779
3796
3789
3779
3796
N/R
N/R
Polyolefin*
Polyolefin*
3731 3792LM
3748
3764
6111 1
3796 N/R
3764 3792LM
3748
3796 N/R
3796 N/R
3731 3792LM
3748
3764
6111 1
Plastic**
Paper
4
Uncoated cardboard/ chipboard
Coated cardboard/ chipboard
Fabric
Rigid foam***
Flexible
foam
Low melt adhesives * E.g., polyethylene
** E.g., ABS, PVC, acrylic
*** Beadboard/styrene
1
2
6111 is a family of products that includes 6111, 6111HT, and 6116.
Removable
3 Must be sprayed on rigid foam to prevent cavitation.
Plastic** Paper Uncoated cardboard/ chipboard
Coated cardboard/ chipboard
Fabric Rigid foam*** Flexible foam
3764 3792LM 3762 3762LM 3762 3762LM 3764 3792LM 3738 3776LM 6111 1, 3
3747 3776LM 3792 3755LM 3792 3792LM 3792 3776LM 3747 3792LM
3748 6111 1 3792LM 3738 3755LM 3747 6111 1
3750LM 3750
3792LM 3738 3792LM
3762LM 3764
3755LM 3747
3750LM 6111 1
3747 3776LM 3747 3776LM 3747 3776LM 3747 3776LM 3747 3776LM N/R
3796 3796 3796 3796 3796
3764 3792LM 3747 3792LM 3747 3792LM 3764 3792LM 3747 3792LM N/R
3747 3764 3764 3747 3764
3792 3796 3796 3796
3789
3796
3779
N/R 3789
3779
3796
N/R 3789
3779
3796
N/R 3789
3779
3796
N/R 3789
3779
3796
N/R N/R
3776LM 3747 3776LM
N/R
3796
3792LM 3747 3792LM
3764
3796
3789
3779
3796
N/R
3789
3779
3796
N/R 3789
3779
3796
N/R 3789
3779
3796
N/R 3789
3779
3796
N/R 3789
3779
3796
N/R N/R N/R 3789
3779
3796
N/R
3731 3792LM 3731 3792LM 3764 3792LM 3731 3792LM 3731 3792LM 6111 1, 3
3764 3764 3748 3764 3764
3748
6111 1
3748
6111 1
6111 1 3748
6111 1
3748
6111 1
3792LM 3731 3792LM
3748
3764
6111 1
3731 3792LM 3764 3792LM 3764 3792LM 3764 3792LM 3764 3792LM 6111 1, 3
3764 3776LM 3747 3776LM 3747 3776LM 3747 3776 3792 3776LM
3747
3748
3748 3748
6111 1
3748 3747
3792LM 3764 3792LM
3776LM 3747 3776LM
3748
3762 3762LM 3762 3762LM 3764 3792LM 3792 3792LM 6111 1, 3
3793
6111 1
3798LM 2 3792 3792LM 3747 3776LM 3738 3755LM
3755LM 3738 3755LM 3792 3764 3762LM
3792LM
3750LM
3750 3750LM 3750LM
3755LM 3762 3755LM
3792LM 3792 3762LM
3762LM 6111 1 3792LM
3750LM 3750LM
3762 3762LM 3764 3792LM 3762 3792LM 6111 1, 3
3792 3792LM 3747 3776LM 3792 3762LM
3738 3755LM 3792
3750 3750LM
3738
6111 1
3755LM
3750LM
3762LM 3762 3762LM
3792LM 3750 3792LM
3776LM 3738 3755LM
3750LM 3792 3750LM
3731 3792LM 3764 3792LM 6111 1, 3
3764 3776LM 3792 3776LM
3792
3747
3747
3792LM 3764 3792LM
3776LM 3792 3776LM
3747
3738 3776LM 6111 1, 3
3747 3792LM
6111 1
3762LM 3738 3776LM
3792LM 3747 3792LM
3755LM 6111 1
3750LM
6111 1, 3 3792LM 6111 1
3762LM
3755LM
3750LM
3792LM
3762LM
3755LM
3750LM
3738 3792LM
3764
3747
6111 1
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
5
Product
Information
6
3762
Tan
3764*
Clear
3779*
Amber
3789*
Brown Brown
3792*
Clear
3796
Lt. Tan
3797
Off-white
3731*
Tan
3738*
Tan
3747
Tan
3748*
Off-white
3748 VO
Light Yellow
3750
Tan
3750
Clear
Product
(Color)
3750LM
Tan
3755LM
Clear
3762LM*
Lt. Amber
3776LM
Tan
3792LM*
Clear
3798LM*
Lt. yellow
FDA UL Features
Listed 1 Listing Application Ideas
N N/A
Y
Y
N/A
Y
Y
N
Y
Y
Y
N
N
N
Y
Y
Y
Y
Y
N
N/A
N/A
N/A
V2
N/A
N/A
V2
N/A
V2
VO
N/A
N
V2
V2
VO
V2
V2
N/A
• Excellent “hot tack”, fast setting for corrugated, beadboard, repack, recoup
• Economical, general purpose • Use with AE II LT applicator only
• “Delayed-tack” applied in thin-glue-line ribbon for paper, corrugated, chipboard, displays, exhibits
• Use with low melt applicator only
• Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood
• Economical, general purpose • Use with low melt applicator only
• Bonds variety of plastics, woods and light-gauge metals
• Use with low melt applicator only
• Clear, multi-purpose for wood, coated paper, polyolefins and other heat-sensitive materials
• P.O.P. displays • Use with low melt applicator only
• Removable "gummy glue" for many substrates
• Removes easily without residual tack • Use with low melt applicator only
• High heat resistance
• Bonds plastics including polyethylene, polypropylene
• High delivery rate and long bonding range • General purpose for foundry sand cores, wood bonding, corrugated, selected plastics and chipboard
• General purpose for wide variety of plastics, wood and lightweight metals
• Good thermal shock resistance • Non-corrosive to copper for many electronic applications
• Bonds polyolefins
• Self-extinguishing version of 3748
• Meets UL 1410 requirements
• Low viscosity for high flow rate, increased production
• Good hot tack, quick grab for packaging and woodworking
• Low viscosity for high flow rate, increased production
• Good hot tack, quick grab for packaging and woodworking
• Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood
• Economical, general purpose
• Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene
• Flexible at low temperatures
• High heat resistance • High strength
• Good fuel and oil resistance • Electronics
• High performance for plastics • Impact resistant
• Bonds vinyl and wood • Good fuel and oil resistance
• Clear, multi-purpose for wood, corrugated, fabric,furniture, upholstery, novelties, and other lightweight materials
• High performance for plastics and light-gauge metals
Y V2 • High ball and ring • Low viscosity
• Good for electrical potting
3794 Hi Tack PSA
Lt. Tan
6111
Tan
6111
Green
6111HT
Tan
6111HT
Blue
6116
Off-White
Y
N
N
N
N
N
N/A
N/A
N/A
N/A
N/A
N/A
• Sprayable high tack PSA for bonding plastic, paper, metals, die-cut labels
• Sprayable 100% solventless adhesive for most foams, fabrics, plastics, particle board, and thin metal
• Same as 6111 tan but green in color.
• Similar to 6111 but has higher heat resistance.
• Similar to 6111 but has higher heat resistance and blue in color.
• Similar to 6111 but lower than normal viscosity and mainly used on fabrics.
* Also available in bulk. (1) Made from components listed as indirect food additives under FDA regulations for adhesives (21 CFR 175.105).
(2) Brookfield Thermosel Viscometer in Centipoise.
(3) ASTM E-28-99 (4) Temperature at which adhesive fails (5) On canvas (6) On Douglas Fir (7) 1/8" semicircular bead, Douglas Fir to Douglas Fir.
Sizes
1/2" x 12"AE
5⁄8" x 2"TC
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 2"TC
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
1/2" x 12"AE
1/2" x 12"AE
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
5⁄8" x 8"Q
1" x 3"PG
1" x 3"PG
5⁄8" x 2"TC
1" x 3"PG
5⁄8" x 2"TC
5⁄8" x 2"TC
1/2" x 12"
1/2" x 12"
5⁄8" x 2"TC
1/2" x 12"
5⁄8" x 2"TC
1⁄2" x 12"AE
5⁄8" x 2"TC
1⁄2" x 12"AE
5⁄8" x 2"TC
5⁄8" x 2"TC
5⁄8" x 2"TC
1⁄2" x 12"AE
5⁄8" x 2"TC
1⁄2" x 12"AE
5⁄8" x 2"TC
5⁄8" x 2"TC
1⁄2" x 12"AE
EC Temp
Control
Modules
N/A
N/A
1
1
1
N/A
5
4
4
4
4
N/A
N/A
3
4
5
5
4
N/A
N/A
Viscosity cps 2
4000
@250°F
13,000
@250°F
4000
@250°F
8250
@250°F
10,500
@250°F
9500
@250°F
12,000
@375°F
2875
@375°F
4100
@375°F
5000
@375°F
5500
@375°F
1900
@375°F
4800
@375°F
1870
@375°F
6000
@375°F
7000
@375°F
5200
@375°F
5000
@375°F
23,000
@375°F
2650
@375°F
Delivery
Time (sec) for 1'' x 3''
Cartridge
45
N/A
45
47
57
N/A
N/A
35
45
65
65
30-40
35-45
30
55
75
70
45
120
55
Ball & Ring
Melt Point
(°F/°C)
200/95
157/70
205/96
184/84
178/81
191/88
315/157
186/86
220/104
292/144
305/152
200/93
178/81
201/94
190/88
325/163
270/132
179/81
240/116
304/151
3
Heat
Resistance 4
(°F/°C)
128/54
120/49
130/54
140/60
140/60
120/49
265/130
130/54
145/63
175/79
175/79
125/52
135/57
130/54
140/60
300/149
220/104
140/60
200/93
170/77
Peel
Strength
PIW
6
13
6
9
13
N/A
22
13
20
18
15
6
12
7
14
18
16
13
29
10
5
Shear Open
Strength
PSI
72°F (22°C) 72°F (22°C) (sec)
475
500
480
600
350
N/A
490
375
430
250
275
500
250
545
390
700
570
250
550
350
6
Time
1/8'' Bead
25
120
25
40
40
30
30
50
45
45
30
N/A
N/A
35
40
25
50
50
40
30
7
2 lb. bricks
.75"x.75" chips
.75"x.75" chips
.75"x.75" chips
.75"x.75" chips
.75"x.75" chips
N/A
N/A
N/A
N/A
N/A
N/A
15,000
@325°F
3,000-5,000
@375°F
3,000-5,000
@375°F
2,500-4,500
@375°F
2,500-4,500
@375°F
1,300
@375°F
N/A
N/A
N/A
N/A
N/A
N/A
224/107
284/140
284/140
224/107
224/107
199/93
120/49
145/63
145/63
175/79
175/79
160/69
16
34
34
26
26
20
N/A
N/A
N/A
N/A
N/A
N/A
N/A = Not available
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
> 60
1 surface 60
2 surface 360
1 surface 60
2 surface 360
1 surface 180
2 surface 480
1 surface 180
2 surface 480
1 surface 120
2 surface 300
7
8
Selecting a 3M
™
Scotch-Weld
™
Hot-Melt Applicator to fit your needs
C
A
B
3M
™
Scotch-Weld
™
Hot Melt Applicator LT.
Medium volume using low melt adhesive.
UPC# 021200-82245
26
3M ™ Scotch-Weld with Quadrack ™
™ Hot Melt Applicator LT
Converter. Medium volume using low melt adhesive.
UPC# 021200-89447
27
D
3M ™ Scotch-Weld ™ Pneumatic Hot Melt
Applicator PG II LT with Speedloader. High volume using low melt adhesive.
UPC# 021200-89395
28
F
E
3M ™ Scotch-Weld ™ Hot Melt Applicator AE II LT.
Low volume using low melt adhesive.
UPC# 051115-25567
29
3M ™ Scotch-Weld ™ Hot Melt Applicator TC.
Medium volume.
UPC# 021200-82244
30
G
H
3M ™ Scotch-Weld with Quadrack ™
™ Hot Melt Applicator TC
Converter. Medium volume.
UPC# 021200-89445
31
I
3M ™ Scotch-Weld ™ Pneumatic Hot Melt
Applicator PG II with Speedloader.
High volume.
UPC# 021200-22033
32
3M ™ Scotch-Weld
Low volume.
™ Hot Melt Applicator AE II.
UPC# 021200-96594
33
3M ™ Scotch-Weld
Hot Melt Applicator
™
EC. Medium volume; variable temperature control.
UPC# 021200-89519
34
35
Lightweight, easy-to-use units... 3M’s innovative melt-on-demand or progressive feed technology.
3M ™ Scotch-Weld ™
Hot Melt Applicators
Weight
(1)
Output
lb/hr
(2)
Temperature
(3)
Power
(120V)
Adhesive
dia. x length, inches
5/8 x 2 TC
Features Warranty
(Months)
A
LT 10.0 oz.
2.6
265°F (129°C) 150W For use with low melt adhesives
12
B
C
LT with Quadrack
Converter
13.8 oz.
Pneumatic PG II LT 4.3 lbs.
with Speedloader
2.6
6.0
265°F (129°C)
265°F (129°C)
150W
500W
5/8 x 8 Q
1 x 3 PG Pneumatic high output for low melt adhesives
12
D
AE II LT 20.0 oz.
4.0
265°F (129°C) 100W 1/2 x 12 AE All electric operation for low melt adhesives
6
E
TC 10.0 oz.
3.5
385°F (196°C) 150W 5/8 x 2 TC Easy to use with standard melt adhesives
12
F
G
H
H
TC with Quadrack
Converter
Pneumatic PG II with Speedloader
AE II
EC
13.8 oz.
4.3 lbs.
20.0 oz.
24.0 oz.
3.5
7.5
4.0
5.5
385°F (196°C)
385°F (196°C)
400°F (204°C)
260°F-450°F
(127°-232°C)
150W
500W
100W
350W
5/8 x 8 Q
1 x 3 PG
1/2 x 12 AE
5/8 x 8 Q
Pneumatic high output for standard melt adhesives
All electric operation for standard melt adhesives
Temperature modules to operate with standard and low melt adhesives
(1) Weight shown is for applicator only — does not include adhesive capacity. (2) Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow.
(3) Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
12
6
12
12
36
Accessories to improve your productivity
9726
9727
9764
9777
9782
9916 9913 9917
Tip No. Description
9726 "T" Tip (shown with valve and adapter) for all 3M ™ Applicators
9764 3/4" Slotted Spreader (3755LM adhesive only)
9777 1/4" Slotted Spreader (3755LM adhesive only)
9782 1/2" Slotted Spreader (3755LM adhesive only)
9727 "L" Tip (shown with adapter and valve) for all 3M ™ Applicators
9916 3 Hole Spreader
9913 2 Hole Spreader (1/4" hole span)
9917 3 Hole 1" Spreader for 3M ™ Applicator II only
9929 High Viscosity Valve (TC, EC, PG-II)
9946 .072" Brass Extension for 3M ™ Applicators PG II and PG II LT only
9785 .070" Tapered Aluminum Extension for all 3M ™ Applicators
9725 Mini Extension Tip .072" Opening for all 3M ™ Applicators
9922 .063" Fluted Tip
9940 .125" Fluted Tip
9921 .090" Fluted Tip
Increase loading capacity and ease of operation with Quadrack
Converter and Palm Trigger.
37
9929
9946 9785
9725 9922 9940 9921
38
A general purpose tip (.090) is supplied with each 3M ™ Scotch-Weld ™ Applicator. To increase productivity, optional tips can provide multiple beads, flat ribbons, guided beads for carton sealing, and extended reach.
39
Foot Pedal
40
Heavy-Duty Benchstands
provide added convenience.
41
Foot pedal, magazine feeder, and benchmount accessories can provide high capacity, hands-free operation for
3M ™ Scotch-Weld ™
3M ™ Scotch-Weld ™
PG II and
PG II LT.
Magazine Feeder
42
Bench nozzle assembly
Benchmount
43
9
Ordering
Information
10
3M
™
Scotch-Weld
™
Hot Melt Adhesives
Product
3750LM
3755LM
3762LM
3762LM
3762LM
3762LM
3762LMB
3762LMB*
3776LM*
3776LM
3776LM
3792LM
3792LM
3792LM
3792LM
3792LMB
3792LMB
3798LM
3798LMB*
3764B
3764B
3779
3779
3779
3779B*
3789
3789
3789*
3792
3792
3750
3750
3762
3762
3762
3762
3764
3764
3764
3764
3731
3731*
3731
3738
3738
3738
3738
3738B
3738B*
3747
3747
3747
3747
3748
3748
3748
3748B
3748
3748VO*
3748VO*
3748VO
*Non-stocked items
Color
Tan
Clear
Lt. Amber
Lt. Amber
Lt. Amber
Lt. Amber
Lt. Amber
Lt. Amber
Tan
Tan
Tan
Clear
Clear
Clear
Clear
Clear
Clear
Lt. yellow
Lt. yellow
Clear
Clear
Amber
Amber
Amber
Amber
Brown
Brown
Brown
Clear
Clear
Tan
Clear
Tan
Tan
Tan
Tan
Clear
Clear
Clear
Clear
Tan
Tan
Tan
Tan
Tan
Tan
Off-White
Tan
Tan
Tan
Tan
Tan
Tan
Off-White
Off-White
Off-White
Off-White
Black
Lt. Yellow
Lt. Yellow
Lt. Yellow
Size
1/2"x12" AE
5/8" x 2" TC
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
5/8" x 8" Q
Pellets
Pellets
1" x 3" PG
1/2" x 12" AE
5/8" x 8" Q
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
5/8" x 8" Q
Pellets
Pellets
5/8" x 2" TC
Chips
1/2" x 12" AE
1/2" x 12" AE
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
5/8" x 8" Q
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
5/8" x 8" Q
Pellets
Pellets
1" x 3" PG
5/8" x 2" TC
5/8" x 8" Q
Pellets
1" x 3" PG
5/8" x 8" Q
Pellets
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
1" x 3" PG
Chips
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
5/8" x 8" Q
Pellets
Pellets
1" x 3" PG
1/2" x 12" AE
5/8" x 2" TC
5/8" x 8" Q
1" x 3" PG
5/8" x 2" TC
5/8" x 8" Q
Chips
5/8" x 8" Q
1" x 3" PG
5/8" x 2" TC
5/8" x 8" Q
Container Size
22 lbs
11 lbs
11 lbs
22 lbs
11 lbs
11 lbs
11 lbs
22 lbs
950 lbs
11 lbs
11 lbs
11 lbs
22 lbs
11 lbs
11 lbs
11 lbs
22 lbs
950 lbs
11 lbs
22 lbs
950 lbs
22 lbs
11 lbs
11 lbs
22 lbs
22 lbs
11 lbs
22 lbs
22 lbs
11 lbs
11 lbs
11 lbs
22 lbs
11 lbs
11 lbs
11 lbs
22 lbs
11 lbs
11 lbs
11 lbs
11 lbs
11 lbs
22 lbs
11 lbs
11 lbs
22 lbs
11 lbs
22 lbs
11 lbs
11 lbs
11 lbs
22 lbs
22 lbs
22 lbs
11 lbs
11 lbs
11 lbs
22 lbs
950 lbs
22 lbs
11 lbs
UPC
051115-31933
021200-83535
021200-49128
051115-25579
021200-49134
021200-49125
021200-49130
021200-49133
021200-89501
021200-25583
021200-89499
021200-83491
021200-25580
021200-82456
021200-82454
021200-43778
021200-49098
021200-41604
021200-43825
021200-96269
021200-97353
021200-82614
021200-82596
021200-82615
021200-65261
021200-82598
021200-82597
021200-82599
021200-76054
021200-87850
021200-41526
021200-82602
021200-82603
021200-85799
021200-89307
021200-82371
021200-82369
021200-89308
021200-82606
021200-82583
021200-45271
021200-49139
021200-49140
021200-82609
021200-82594
021200-82610
021200-65262
021200-89305
021200-49094
021200-82221
021200-82220
021200-82560
021200-82561
021200-82585
021200-82584
021200-76374
021200-43752
021200-45242
021200-85797
021200-85816
021200-85795
SN
62-3758-9531-5
62-3755-9830-7
62-3720-9330-2
62-3720-9531-5
62-3720-9830-1
62-3720-9132-2
62-3720-9335-1
62-3720-9339-3
62-3733-9330-5
62-3733-9531-8
62-3733-9132-5
62-3760-9330-8
62-3760-9531-1
62-3760-9830-7
62-3760-9132-8
62-3760-9335-7
62-3760-9339-9
62-3798-9830-7
62-3798-9335-7
62-3750-9531-2
62-3757-9531-7
62-3762-9330-4
62-3762-9531-7
62-3762-9830-3
62-3762-9132-4
62-3764-9330-0
62-3764-9531-3
62-3764-9830-9
62-3764-9132-0
62-3764-9335-9
62-3764-9337-5
62-3779 9330-8
62-3779-9830-7
62-3779-9132-8
62-3779-9335-7
62-3789-9330-7
62-3789-9132-7
62-3789-9335-6
62-3792-9330-1
62-3792-9531-4
62-3731-9132-9
62-3731-9330-9
62-3731-9335-8
62-3738-9330-4
62-3738-9531-7
62-3738-9830-3
62-3738-9132-4
62-3738-9335-3
62-3738-9339-5
62-3747-9330-5
62-3747-9531-8
62-3747-9830-4
62-3747-9132-5
62-3748-9330-3
62-3748-9830-2
62-3748-9132-3
62-3748-9335-2
62-3724-9132-4
62-3768-9330-1
62-3768-9830-0
62-3768-9132-1
3M
™
Scotch-Weld
™
Hot Melt Adhesives (continued)
Product
3792
3792
3792B*
3792B
3794
3796
3796
3797
3797
6111B
6111B
6111HTB
6111HTB
6111HTB
6111HTB*
6116
*Non-stocked items
Color
Clear
Clear
Clear
Clear
Clear
Lt. Tan
Lt. Tan
Off-White
Off-White
Green
Tan
Tan
Tan
Blue
Blue
Off-White
Size
Chips
Chips
Chips
Chips
Chips
Chips
Chips
5/8" x 2" TC
5/8" x 8" Q
Pellets
Pellets
2 lb Loaf
1" x 3" PG
5/8" x 2" TC
1" x 3" PG
5/8" x 2" TC
Container Size
11 lbs
11 lbs
22 lbs
950 lbs
34 lbs
22 lbs
11 lbs
22 lbs
11 lbs
22 lbs
22 lbs
22 lbs
850 lbs
22 lbs
850 lbs
22 lbs
UPC
021200-82589
021200-65263
021200-87960
021200-49097
021200-43830
021200-25352
021200-25353
021200-82592
021200-82593
021200-96590
021200-96589
021200-43779
021200-56567
021200-49935
021200-56568
021200-49924
SN
62-3792-9830-0
62-3792-9132-1
62-3792-9335-0
62-3792-9339-2
62-3794-6630-3
62-3761-9330-6
62-3731-9830-5
62-3797-9330-0
62-3797-9830-9
62-6112-9335-8
62-6111-9335-0
62-6113-9335-6
62-6113-9339-8
62-6115-9335-1
62-6115-9339-3
62-6116-9335-9
3M
™
Scotch-Weld
™
Hot Melt Applicators
Product UPC SN
LT
LT with Quadrack Converter and
Palm Trigger
Pneumatic PG II LT with Speedloader and Cartridge Feed
Pneumatic PG II LT with Speedloader and Magazine Feed
AE II LT
TC
TC with Quadrack Converter and
Palm Trigger
021200-82245
021200-89447
021200-89395
62-9281-9930-6
62-9281-9950-4
62-9783-9630-7
021200-89396 62-9783-9830-3
051115-25567 62-9799-9930-7
021200-82244
021200-89445
62-9990-9935-1
62-9990-9950-0
Pneumatic PG II with Speedloader and
Cartridge Feed includes bench stand and tips 9921 and 9946 021200-22033 62-9938-9630-7
Pneumatic PG II Refurbished with
Speedloader and Cartridge Feed*
Pneumatic PG II with Speedloader and
Magazine Feed includes bench stand and tips 9921 and 9946
Pneumatic PG II Refurbished with
Speedloader and Magazine Feed
021200-64787
021200-22034
62-9949-9931-6
62-9938-9830-3
021200-64788 62-9949-9932-4
AEII 021200-96594 62-9796-9930-3
EC 021200-89519 62-9680-9930-9
*Non-stocked items
3M
™
Scotch-Weld
™
Hot Melt Accessories
Product Description UPC SN
9727
9916
9913
9917
9729
9726
9764
9777
9782
9946
9785
9725
9922
9940
9921
Heavy Duty Bench
Stand for use with
PG II & PG II LT
Heavy Duty bench
Stand for use with
EC, TC, & LT
Bench Mount
Bench Nozzle
Assembly
Foot Pedal Assembly
TC & LT Palm Trigger
TC Quadrack
Converter
"T" Tip Assembly 021200-64542 62-9726-9930-0
3/4" Slotted Spreader for use w/3755LM adhesive 021200-83526 62-9764-9930-1
1/4" Slotted Spreader for use w/3755LM adhesive 021200-83732 62-9777-9930-3
1/2" Slotted Spreader for use w/3755LM adhesive 021200-83529 62-9782-9930-3
"L" Tip with Adapter 021200-64543 62-9727-9930-8
3 Hole Spreader
2 Hole Spreader
3 hole 1" Spreader
High Viscosity Valve
(TC, EC, PG II)
021200-21836
021200-21830
021200-21837
62-9916-9930-7
62-9913-9930-4
62-9917-9930-5
021200-64840 62-9729-9930-4
.072" Brass Extension
(PG II, PG II LT) 021200-22040 62-9946-6980-2
.070" Tapered Aluminum
Extension (all applicators) 021200-82554 62-9785-9930-6
.072" Mini Extension Tip 021200-21786 62-9725-9930-2
.063" Fluted Tip
.125" Fluted Tip
.090" Fluted Tip
021200-21841 62-9922-0066-7
021200-22036 62-9940-6920-1
021200-21840 62-9921-0066-9
–
–
–
–
–
–
021200-22039
021200-82418
021200-82277
021200-21713
021200-82278
021200-82701
021200-83536
62-9945-9930-6
62-9945-9935-5
62-9276-9930-6
62-9233-2781-1
62-9277-9930-4
62-9761-9930-7
62-9275-9935-7
44
45
11
Other 3M
™
Adhesive Technologies for improved design, productivity, and performance
3M ™ Scotch-Weld ™
Structural Adhesives for the permanent bonding power of epoxies, urethanes, acrylics, and cyanoacrylates.
3M ™ Scotch-Grip ™ Rubber and
Plastic Adhesives for handy tubes of bonding power.
46
3M ™ Scotch-Weld ™ Polyurethane
Reactive (PUR) Adhesive Systems
for structural adhesive benefits with hot melt speed.
3M ™
for a fistful of bonding power
49
Industrial Aerosol Adhesives
with a wide variety of materials.
47
3M ™ Scotch-Weld ™
Cylinder Spray
Adhesives for bulk productivity with aerosol convenience and portability.
50
3M ™ Fastbond ™
Water-based
Adhesives for productivity, performance, profitability, and compliance.
48
51
Limited Product Warranty: 3M warrants all 3M
™
Scotch-Weld
™
Hot Melt Applicators for 6 months from the date of manufacture, that the 3M product will be free of defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty does not cover damage resulting from the use or inability to use the 3M product due to misuse, workmanship in application, or application or storage not in accordance with 3M recommended procedures. Important Notice: User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a
3M product in a particular application. The materials to be bonded with the product, the surface preparation of these materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Limitation of Remedies and Liability: If the 3M product is proved to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY, AT 3M’S OPTION,
SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential,regardless of the legal theory asserted, including negligence, warranty, or strict liability.
Industrial Adhesives and Tapes Division
900 Bush Avenue, Building 21-1W-10
St. Paul, MN 55144-1000 www.3M.com/adhesives
3M, Fastbond, Scotch-Grip, and Scotch-Weld are trademarks of 3M Company.
Printed in U.S.A.
© 3M 2008
78-6900-2947-1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project