Manual 19460849
 Transmitter
LED
Problem
Cause
Remedy
Green: flashes
The sound is
There is a device
Move YID-W10 away from
Red: flashes for
a short time
iPod does not
Work.
interrupted. (microwave oven, cordless | the device.
Red: Off phone, Wi-Fi, etc.)
outputting signals in 2.4
GHz frequency band nearby.
The signal from the Change the position of the
transmitter is blocked by transmitter to avoid the
your body, metallic objects, | object blocking the signal.
or wall, etc.
The position of the Move the transmitter closer
transmitter is too far from to the receiver.
the receiver.
Green: flashes No sound. Communication error of Reconnect your iPod/iPhone
or lights up your iPod/iPhone, and the to the transmitter firmly.
transmitter. If this status occurs
Red: flashes frequently, disconnect your
iPod/iPhone from the
transmitter, restart it, and
then reconnect firmly.
Green: flashes Controlling Your iPod is recognized as | Use an iPod supported by
or lights up volume on your | an unsupported model. YID-W10.
If your iPod is the supported
model, reconnect it to the
transmitter firmly.
If this status occurs
frequently, disconnect your
iPod from the transmitter,
restart it, and then reconnect
firmly.
Green: flashes
twice
Red: Off
No sound.
Communication error of
your iPod/iPhone, and the
transmitter.
Reconnect your iPod/iPhone
to the transmitter firmly.
If this status occurs
frequently, disconnect your
iPod/iPhone from the
transmitter, restart it, and
then reconnect firmly.
6 En
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement