Rose electronics KVM Rack Drawer Specifications

Rose electronics KVM Rack Drawer Specifications
Rackview - KVM Rack Drawer
INSTALLATION AND
OPERATIONS MANUAL
Standard 17” and 19”LCD
KVM Rack Drawer
1280 x 1024
3
Rose Electronics 10707 Stancliff Road
Houston, Texas 77099
Phone (281) 9337673
WWW.ROSE.COM
.
Rose Electronics 10707 Stancliff Road
Houston, Texas 77099
Phone (281) 9337673
WWW.ROSE.COM
LIMITED WARRANTY
Rose Electronics warrants the Rackview Product to be in good working order for one year from the date of
purchase from Rose Electronics. Should this product fail to be in good working order at any time during this oneyear warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below. Repair
parts and replacement units will be either reconditioned or new. All replaced parts become the property of Rose
Electronics. This limited warranty does not include service to repair damage to the Unit resulting from accident,
disaster, abuse, or unauthorized modification of the Unit, including static discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose
Electronics or an authorized repair center providing a proof of purchase date.
If this Unit is delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to
prepay shipping charges to the warranty service location, and to use the original shipping container or its
equivalent. You must call for a return authorization number first. Under no circumstances will a unit be accepted
without a return authorization number. Contact an authorized repair center or Rose Electronics for further
information.
ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A
PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, W HETHER EXPRESS
OR IMPLIED, W ILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED W ARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD W ORKING ORDER AS W ARRANTED ABOVE,
YOUR SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT W ILL
ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES
INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE
ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU. THIS W ARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS W HICH MAY VARY
FROM STATE TO STATE.
IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft Windows
are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this manual are acknowledged
to be the property of the trademark owner.
.
Copyright © Rose Electronics 2013. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including
photocopying and recording, without the prior written permission of Rose Electronics.
Rose Electronics Part # MAN-RV1-CAKVT-17/19
Printed In the United States of America – Revision 1.0
Page 1
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Table of Contents
Safety Instructions
Page 3
Pre-Installation and Package Contents
Page 4
Rackview Layout Diagram and Dimensions
Page 5-6
Installation
Page 7-8
Connection to a Server/KVM Switch
Page 9
OSD (On-Screen Display Control Panel) Operation
Page 10
Specifications
Page 11
Technical Support
Page 12
Page 2
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
•
•
•
•
•
•
•
•
•
•
•
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally
falling and causing damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap
between it and the power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the
voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the
cord should be higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to
prevent it being damaged by transient overvoltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled
on to the power supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified
service personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Page 3
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Pre-Installation and Package Contents
Before Installation:
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
Unpacking:
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact your supplier immediately.
Package Contents:
1x Rackview Unit
1x Mounting Bracket set
1x Combo Cable for Video/Keyboard/Mouse (VGA/USB)
1x Power Cord
1x User Manual
1x set of screws and washers for assembly
Product Operation:
a) Power On Procedure
•
•
•
Power on the Rackview (see power switch on back panel)
Power on the KVM Switch or other connected product
Power on the CPU
b) Video Input Select Button (see OSD Section, Page 10)
The Rackview remembers the last valid video input selection, so if the CPU input has changed, the user
needs to re-select the video input.
•
•
•
Page 4
Locate the “Video Input Select” button on the OSD display control panel
Push the Video Input Select button to toggle between VGA and DVI Input
Select the appropriate Video Input format (VGA or DVI)
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Rackview Layout Diagram and Dimensions
6
3
Model
RV1-CAKVT17/DVI
RV1-CAKVT19/DVI
Product Dimension
(W x D x H) approx
Packing Dimension
(W x D x H) approx
441.6 x 530 x 44 mm
17.4 x 20.9 x 1.73 inch
590 x 823 x 140 mm
23.2 x 32.4 x 5.5 inch
12 kg
26 lb
16.5 kg
36 lb
590 x 823 x 140 mm
23.2 x 32.4 x 5.5 inch
13 kg
29 lb
17.5 kg
39 lb
441.6 x 570 x 44 mm
17.4 x 22.4 x 1.73 inch
Net
Weight
Gross
Weight
The package weight can vary with accessories included
Page 5
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Rackview Dimensions
Unit: mm
1mm = 0.03937 inch
Page 6
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Installation of Rackview 17” and 19”
STEP 1
Insert the Left and Right rear-mounting slides
into the Rackview Console Drawer
STEP 2
Measure the depth of the front and rear rack rails
Align each rear-mounting slide to a suitable
length (depth)
STEP 3
Complete the Installation
Fix the Rackview Console Drawer into the Rack
Screws, cage nuts and cup washers are provided
Page 7
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Installation – How to Unlock and Operate the Rackview 17” and 19”
STEP 1
Hold the handle and slide out the Rackview
drawer
STEP 2
Flip up the LCD to a suitable viewing angle
STEP 3
Operate the Rackview Console Drawer
Page 8
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Connection to PS/2 or USB Server
(sample connections)
Rackview LCD console drawer
KVM cable. VGA + PS2
On/Off
Power
Rackview LCD console drawer
On/Off
Power
PS/2 server
KVM cable. VGA + USB
USB server
Connection to an external KVM switch
(sample connections)
Rackview LCD console drawer
On/Off
Power
KVM cable. VGA + PS2
PS/2 KVM switch
Rackview LCD console drawer
On/Off
Power
KVM cable. VGA + USB
USB KVM switch with DVI/VGA
Adapter
Note: Cabling options include either a VGA/USB, a VGA/PS2, or a DVI USB cable.
Note: Please check cable details with your dealer.
Caution : The Rackview LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers
and KVM switch are powered-on may cause irreversible damage to the servers, KVM and LCD console
drawer. Before attempting to connect anything to the Rackview LCD console drawer, we suggest turning off
the power to all devices. Apply power to connected devices only after the Rackview LCD console drawer
has been powered-on. Rose Electronics is not responsible for any product damage or warranty claims caused in this
way.
Page 9
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
On-Screen Display Operation ( OSD )
Page 10
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Rackview - LCD / Keyboard / Mouse Specification
Item
Description
LCD Manufacturer
Display Size
17" TFT color LCD
Max. Resolution
19” TFT color LCD
1280 x 1024
Brightness (cd/m²)
1280 x 1024
250
250
Color Support
16.7 M
16.7M
Contrast Ratio (typ.)
1000:1
1000:1
160˚ x 160˚
Viewing Angle (H/V)
Dot Pitch (mm)
160˚ x 160˚ (80/80/80/80)
0.264
Display Area (mm)
0.294
337.92 (H) x 270*33 V
Response Time (ms)
376.32 (H) x 301.05 (V)
5
LCD Panel MTBF (hrs)
5
50,000
50,000
VGA Signal Input
Analog,
DVI Signal
DVI-D, TMDS Single-Link
Sync. Type (VGA)
Separate H/V, Composite, SOG
Resolution
Up to 1280*1024, 60/75Hz
Plug and Play DDC (DVI and VGA)
VESA EDID 1.3
DB-15 connector for VGA / keyboard / mouse (Combo
interface)
PS2 5ft Cable: (1*HD15M to HD15M + 2*PS2)
USB 5ft Cable: (1*HD15M to HD15M + USB)
DVI: (DVI-D)
Console Port
Audio Option
3.5mm with L/R Speakers. Impedance 30KΩ / 750mV. Speaker Power – 2*2W
Power Input
Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
Screen ON = 25W or less, Power Saving Mode = 4W or less
Compatibility
Multi-platform - Mix PCs, SUNs, IBMs, HPs and DELLs.
Regulation Approval
cUL, FCC, CE
Environmental
Operation
0˚ to
-5˚ to 60
Storage
Relative Humidity
Operating: 20~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random vibration
Product Codes
RV1-CAKVT17/DVI
RV1-CAKVT19/DVI
Rackview 17” KVM Rack Drawer
Rackview 19” KVM Rack Drawer
Interface Cables: (only 1 cable is included – select with order)
/K1: CAB-CMBVMUAC005
/K2: CAB-CMBVM66C005
/K3: CAB-CMBDVUAC005
Page 11
HD15 to HD15 + (1)USB-A. (VGA +USB)
HD15 to HD15 + (2)PS2.
(VGA +PS2)
DVI-D + HD15(M) to DVI-I + (1)USB-A (DVI + USB)
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Technical Support
If you are experiencing problems, or need assistance in setting up, configuring or operating your product,
consult the appropriate sections of this manual. If, however, you require additional information or assistance,
please contact the Rose Electronics Technical Support Department at:
Phone: (281) 933-7673
E-Mail: [email protected]
Web: www.rose.com
Technical Support hours are from: 8:00 am to 6:00 pm CST (USA), Monday through Friday.
Please report any malfunctions in the operation of this Unit or any discrepancies in this manual to the Rose
Electronics Technical Support Department.
WWW.ROSE.COM
[email protected]
(800) 333 9343
Rose USA (281) 933 7673 Rose Europe +49 (0) 2454 969442 Rose Asia +65 6324 2322 Rose Australia +61 (0) 421 247083
Rose Electronics 10707 Stancliff Road Houston, Texas 77099
© Copyright 2013 Rose Electronics. All rights reserved. Specifications subject to change without notice
Page 12
KVM Rack Drawer 17” and 19”
WWW.ROSE.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement