- Computers & electronics
- Telecom & navigation
- Telephones
- Amplicomms
- PowerTel 701 Expandable Handset
- User Guide
Amplicom PowerTel 700 User guide
Add to my manuals18 Pages
Amplicomms PowerTel 700 is a cordless phone designed for individuals who are hard of hearing, offering features like adjustable volume, ringer, and boost for enhanced sound clarity. It includes a large display with easy-to-read text, a talking caller ID that announces the caller's name or number, and a built-in answering machine for convenient message management.
advertisement
▼
Scroll to page 2
of 18
7 PowerTel 701 Extender User Guide SERIES C ONTENTS Important Safety Instructions ...........................................4 Cordless Handset and Charger Base Cordless Phone Handset Display Icons .......................................6 ..............................7 Getting Started/Setup .................................................................8 Adding a Handset .......................................................................10 Help and Support ........................................................................12 Troubleshooting Guide ..............................................................12 Technical Details .........................................................................14 Default Settings ...........................................................................15 Maintenance and Warranty .......................................................16 Important: for any topics not covered in this user guide, please refer to the user guide of the base unit for which you will be pairing the PowerTel 701. 2 Instructions available in other languages at www.amplicomusa.com. FCC COMPLIANCE FCC Compliance The FCC requires that you will be advised of certain requirements involving the use of this telephone. 1. This equipment complies with Part 68 of the FCC rules. A label on the base unit of this equipment contains, among other information, the ACTA Registration Number (US:AAAEQ##TXXXX) and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. terminal equipment. 3. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 4. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called. determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area. NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm 5. If your telephone causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in 6. Your telephone company may make changes to its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If they do, you will be given advance notice so as to give you an opportunity to maintain uninterrupted service. 7. If you experience trouble with the telephone, please contact the Amplicom Service Center at 1-866-AMPLICOM (267-5426) for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem have been corrected or you are sure that the equipment is not malfunctioning. 8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using Some cordless phones operate at frequencies that may cause interference to nearby TVs and VCRs; to minimize or prevent such interference, the base of the cordless phone should not be placed near or on top of a TV or VCR; and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. 9.This product is equipped with a cordless handset, it is hearing aid compatible. 10. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. for Handset unit it has been tested and meets the FCC RF exposure Guidelines, For base unit it should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 3 Safety Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1..Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2..Do not use the telephone to report a gas leak in the vicinity of the leak. 3. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Save these instructions for future use. SAVE THESE INSTRUCTIONS Avoid using a Telephone(other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning. Intended use This phone is suitable for use on a public telephone network. Any other use is considered unintended use. Unauthorized modification or reconstruction is not permitted. Do not open the device and attempt any repair work yourself. Phone location Locate the base, corded phone, and wrist-shaker base: • • 4 On a dry, flat and stable surface Where the power cable will not be a trip hazard S A FETY • • • Where it is not obstructed by furniture At least three feet from other electrical appliances Away from smoke, dust, vibration, chemicals, moisture, heat or direct sunlight. Power failure – What to do Power failure can affect your phone and equipment. Only the corded phone will work if there is a power failure. Medical equipment Do not use the phone near emergency or intensive care medical equipment, or during an electrical storm. If you have a pacemaker check with a medical expert before using this product. Hearing aid compatibility This phone works with most popular hearing aids. However, given the wide range of hearing aids available, the phone may not function fully with every hearing aid. interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. Caution: The phone will produce high volume when Boost is switched on. 1-866-AMPLICOM (267-5426) 5 handset and CharGer Base PowerTel 701 Cordless Handset and Charger Base 1 M 13 s 2 25 rTel 7 Ser we ie Po M M 11 3 12 22 14 23 4 5 6 15 REDIAL MENU INT FLASH TONE CID 7 8 9 10 1 Incoming call 14 Up/Redial 2 Memory 1 15 Headset socket 3 Boost 4 Display 5 Enter Menu/Mute/ Delete 16 6 Internal call 17 7 External call/ 18 Handsfree 19 20 LOCK 8 /Ringer on/off 9 Pause (long press 0) 10 Microphone 21 11 Memory 3 12 Volume up/down 13 Memory 2 24 6 (Headset not included) 16 Phone book/Save/ OK 17 Recall 18 End call 19 Down/Calls list/ Equalizer 20 Keypad 21 #/Keylock 22 Red Light Boost Indicator 23 Select Profile (P) 24 Charging 25 Transfer call Warning: This Handset has been specially designed for individuals who are hard of hearing and has a normal volume which is louder than a standard phone. Use of the Boost feature can cause hearing damage to individuals who are not experiencing hearing loss. Service Center H ANDSET D ISPLAY I CONS Cordless Phone Handset Display Icons The following icons can appear in the LCD display: Phone book mode Play messages fast forward More information to view up Boost receiver volume is on More information to view down Battery status Mute handset microphone Ringer off New calls Keylock is on Answering machine is on Handsfree mode Answering machine is off Call in progress When steady— handset is in range Internal call in progress (if additional handsets are range installed) 1-866-AMPLICOM (267-5426) 7 Getting started Getting Started — Included Equipment PowerTel 701 Extender - Amplified Cordless Accessory Handset • 1 cordless Handset • 1 Rechargable Battery Pack & 3 AAA 3.6V NiMH • 1 charger base for cordless Handset( with Power Adapter Plug Attached) Set up 1. Connect cordless phone charger base Plug the power adapter from the charger base into a wall socket. 8 Service Center GettinG started Set Up - continued 1. Install the battery pack Insert the rechargeable battery pack into the handset as shown. Dispose of battery pack properly. Do not allow battery pack to come into contact with fire or water. 2.Charge the handset Place the handset on its base to charge for a minimum of 16 hours before use. Important: make sure any handset is fully charged before registering. 1-866-AMPLICOM (267-5426) 9 G ETTING STARTED Registration key guide PAGE PAGE PowerTel 700 PowerTel 720 PAGE Press and hold registration key PAGE for at least 10 seconds PowerTel 760 10 Service Center addinG a handset PowerTel 701 Cordless handset and charger base Adding a Handset – Cordless Phone Only register a handset if it has become de-registered from the base or if it was purchased separately. At the handset: 1. Press and hold MENU for approx 10 seconds until the display shows Press and hold Page key. At the base: 2. Press and hold PAGE for at least 10 seconds until the display shows Register. De-register a handset De-register a handset if too many are currently registered on the phone system. 1. Open the menu by pressing MENU, then scroll using REDIAL or TONE CID until Handset is highlighted and press B or OK. 2. Scroll using Then scroll REDIAL REDIAL or TONE CID until Registration is highlighted and press B. REDIAL to highlight De-register and press B. INT FLASH 3. Enter the PIN code (default PIN 0000) and press B. 4. Enter the handset’s internal number (e.g. 1) and press B to confirm. 1-866-AMPLICOM (267-5426) 11 help and support Help and Support Some issues may simply be resolved by disconnecting the power to the unit. In such instances the power to the main base station should be switched off and battery pack in the handset should also be removed for about 20 minutes. After 20 minutes, replace the battery pack and reconnect everything to determine if this has resolved the issue. Troubleshooting Guide I can’t make phone calls 1. Make sure the phone cable is connected properly. Make sure you are using the phone cable that came with your phone. 2. Make sure the base is plugged in, switched on and working. 3. If you’re using the cordless handset, make sure you are not located too far from the base (the phone should work up to 325 yards outdoors and up to 53 yards indoors). 4. Test the phone line and socket by using another phone. I keep losing my connection on the cordless handset 1. Make sure you aren’t too far from the base (in ideal conditions, it should work up to 325 yards outdoors and up to 53 yards indoors). 2. The base may not be in an ideal location – see Safety Information. 12 Service Center Help and support My handset keeps switching off 1. It may need recharging. So it can charge fully, place your handset on its charger base for at least 16 hours with the charger base plugged in and working. 2. Replace the rechargeable battery pack. Any replacement battery packs should be the same type as those provided. The phone system isn’t responding You may need to reset to default settings. Caller’s identification (Call Line ID) isn’t working 1. Check you have this service on your phone line. Please call your network provider. 2. The caller may have withheld their phone number. My handset or base doesn’t ring Check that the ringer is on. I’ve got a buzzing noise on my radio, TV, or computer We suggest you use your cordless handset at least 3 feet away from electrical equipment and mobile phones. There is interference in the earpiece and/or the internet connection is very slow when using the phone You must plug the phone into the wall socket via an ADSL filter if you have broadband internet on your phone line. 1-866-AMPLICOM (267-5426) 13 General information Energy efficient power adapter The included power adapter meets the eco-design requirements of the European Union (Directive 2005/32/EG). Disposal The symbol on this product indicates that electrical and electronic apparatus and battery pack must be disposed of separately from domestic waste at suitable collection points provided by the public waste authorities. Technical Details DECT¹ GAP² Input: 100-240V ~50/60Hz 0.15A Output: 6VDC 800mA Range Outdoors Approx 325 yards/300m Indoors Approx 53 yards/50m Standby Up to 100hrs Maximum Talk Time Up to 10hrs Rechargeable battery pack AAA 3.6V 750mAh NiMH in handset unit. Dialling mode Tone (DTMF) Pulse Optimum ambient temperature 32˚F to 113˚F (0˚C to 45˚C) Optimum relative humidity 20% to 80% Recall 300, 600 ms ¹ DECT: Digital Enhanced Cordless Telecommunication ² GAP: Generic Access Profile = standard for the operation of handsets and base stations from different manufacturers. Standard Power supply (base station) 14 Service Center General information Default Settings Cordless handset Language Handset name Handset ringing melody (external) Handset ringing melody (internal) Handset ringing volume Base ringing melody Base ringing volume Keypad beep Auto talk Contrast Backlight time Boost memory Recall time Dialing mode PIN code Telephone answering machine Language Answer mode PIN code for remote access Answer delay Time format 1-866-AMPLICOM (267-5426) English PowerTel 7 9 5 8 5 On On 3 10s Off 600ms Tone 0000 English Answer and record 000 3 12 hour 15 General information Maintenance and Warranty Maintenance • • Please clean your equipment’s surfaces with a soft, lint-free cloth. Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life. The terms of the warranty do not apply where the cause of the equipment malfunction is the fault of the telephone network operator or any interposed private branch extension system. The terms of the warranty do not apply to the rechargeable battery pack or power packs used in the products. The period of warranty is 24 months from the date of purchase. All deficiencies resulting from material of production faults which occur during the period of warranty will be eliminated free of charge. Rights to claims under the terms of warranty are annulled following intervention by the purchaser or third parties. Damage caused as a result of improper handling or operation, incorrect positioning or storing, improper connection or installation, Acts of God or other external influence are not covered by the terms of warranty. In the case of complaints, we reserve the right to repair or replace defect parts or provide a replacement device. Replacement parts or devices become 16 General information our property. Rights to compensation in the case of damage are excluded where there is no evidence of intent or gross negligence by the manufacturer. If your equipment shows signs of defect during the period of warranty, please return to the sales outlet in which you purchased the AMPLICOM equipment together with the purchase receipt. All rights to claims under the terms of warranty in accordance with this agreement must be asserted exclusively with regard to your sales outlet. Two years after the purchase of our products, claims under the terms of warranty can no longer be asserted. Declaration of conformity The ETL Listed Mark is an alternative to the CSA and UL marks. ETL Testing Laboratories owned by Intertek Testing Services (ITS) is recognized by OSHA as a Nationally Recognized Testing Laboratory (NRTL). ITS tests products according to nearly 200 safety and performance standards. The ETL Listed Mark is accepted throughout the United States when denoting compliance with nationally recognized standards such as ANSI, IEC, UL, and CSA. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued conformance. 17 This page intentionally left blank.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
How do I connect the cordless phone charger base?
Plug the power adapter from the charger base into a wall socket.
How do I install the battery pack?
Insert the rechargeable battery pack into the handset as shown.
How long should I charge the handset?
Charge the handset on its base for a minimum of 16 hours before use.
How do I register a handset?
Press and hold MENU for approx 10 seconds until the display shows Press and hold Page key. Then, press and hold PAGE for at least 10 seconds until the display shows Register.
How do I de-register a handset?
De-register a handset if too many are currently registered. Press and hold MENU for approx 10 seconds until the display shows Press and hold Page key. Then, press and hold PAGE for at least 10 seconds until the display shows De-register.