User manual | Cisco SPA112 2 Port Phone Adapter

Add to my manuals
5 Pages

advertisement

User manual | Cisco SPA112 2 Port Phone Adapter | Manualzz
Data Sheet
Cisco SPA112 2 Port Phone Adapter
Affordable and Feature-Rich Voice over IP (VoIP)
Highlights
Eliminate compromise on voice quality or features for phone and fax capabilities associated with Internet voice
®
over IP (VoIP) service. Cisco VoIP solutions provide the quality, peace of mind, and investment protection at an
affordable price.
Product Overview
The Cisco SPA112 2 Port Adapter enables high-quality VoIP service with a comprehensive feature set through a
broadband Internet connection. Easy to install and use, it works over an IP network to connect analog phones and
fax machines to a VoIP service provider and provides support for additional LAN connections.
The Cisco SPA112 includes two standard telephone ports to connect existing analog phones or fax machines to a
VoIP service provider. Each phone line can be configured independently. With the Cisco SPA112, users can
protect and extend their investment in their existing analog telephones, conference speakerphones, and fax
machines as well as control their migration to IP voice with an extremely affordable, reliable solution.
Compact in design and compatible with international voice and data standards, the Cisco SPA112 can be used
with residential, home-office, and small business VoIP service offerings, including full-featured hosted or open
source IP PBX environments. This easy-to-use solution delivers advanced features to better connect employees
and serve customers, all on a highly secure Cisco network.
The Cisco SPA112 2 Port Adapter (Figures 1 and 2):
●
Enables high-quality VoIP service with a comprehensive feature set through a broadband Internet connection
●
Provides high-quality, clear-sounding voice, using advanced voice quality-of-service (QoS) capabilities and
the industry-leading voice Session Initiation Protocol (SIP) stack
●
Supports reliable faxing with simultaneous voice and data use
●
Includes two standard telephone ports, each with an independent phone number, for use with fax machines
or analog phone devices
●
Is compatible with all industry voice and data standards and common telephone features such as caller ID,
call waiting, and voicemail
●
Includes a simple-to-use web-based configuration utility for easy deployment
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 5
Figure 1.
Cisco SPA112 2 Port Adapter
Figure 2.
Ports on Cisco SPA112 ATA 2 Port Adapter
Features and Benefits
The Cisco SPA112 provides an easy-to-use VoIP solution that offers:
●
Toll-quality voice and carrier-class feature support: The Cisco SPA112 delivers clear, high-quality voice
communication under a variety of network conditions. Excellent voice quality in challenging, changeable IP
network environments is made possible through the advanced implementation of standard voice coding
algorithms. The Cisco SPA112 is interoperable with common telephony equipment such as fax, voicemail,
private branch exchanges (PBXs) and key telephone systems (KTSs), and interactive voice response
systems.
●
Large-scale deployment and management: The Cisco SPA112 enables service providers to provide
customized services to their subscribers. It can be remotely provisioned and supports dynamic, in-service
software upgrades. A highly secure profile upload saves providers the time and expense of managing and
preconfiguring or reconfiguring customer premises equipment (CPE) for deployment.
●
Outstanding security: The Cisco SPA112 supports highly secure, encryption-based methods for
communication, provisioning, and servicing.
●
Compact size: Designed for small spaces, the Cisco SPA112 can be installed as a desktop unit or
mounted on a wall.
●
Comprehensive feature set: The standards-based Cisco SPA112 is compatible with Internet VoIP
provider features such as caller ID, call waiting, voicemail, call forwarding, distinctive ring, and much more
to provide a complete, affordable, and highly reliable solution for high-quality VoIP.
●
Easy installation and changes: The web-based configuration utility enables quick deployment and
easy changes.
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
●
Investment protection: Businesses that are growing rapidly can use the solution with other Cisco Unified
Communications solutions, providing industry-leading investment protection.
●
Peace of mind: Cisco solutions deliver the solid reliability you expect from Cisco. All solution components
have been rigorously tested to help ensure easy setup, interoperability, and performance.
Table 1 lists the specifications for the Cisco SPA112 2 Port Adapter.
Table 1.
Product Specifications
Specifications*
Description
*Note: Many specifications are programmable within a defined range or list of options. Please see the Cisco SPA100 Series Administration Guide
for details. The configuration profile is uploaded to the Cisco SPA112 at the time of provisioning.
Data networking
MAC address (IEEE 802.3)
IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883)
Address Resolution Protocol (ARP)
Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782)
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
Internet Control Message Protocol (ICMP) (RFC 792)
TCP (RFC 793)
User Datagram Protocol (UDP) (RFC 768)
Real Time Protocol (RTP) (RFC 1889) (RFC 1890)
Real Time Control Protocol (RTCP) (RFC 1889)
VLAN tagging (IEEE 802.1p)
Simple Network Time Protocol (SNTP) (RFC 2030)
SIP channels support for both UDP and TCP transport
Voice gateway
SIPv2 (RFC 3261, 3262, 3263, and 3264)
SIP proxy redundancy: Dynamic through use of DNS SRV A records
Reregistration with primary SIP proxy server
SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN])
Highly secure (encrypted) calling using Secure RTP (SRTP)
Codec name assignment
G.711 (A-law and µ-law)
G.726 (32 kbps)
G.729 A
Dynamic payload
Adjustable audio frames per packet
Dual-tone multifrequency (DTMF): In-band and out-of-band (RFC 2833) (SIP information)
Voice features
Independent configurable dial plans with interdigit timers and IP dialing (1 per port)
Call progress tone generation
Jitter buffer: Adaptive
Frame loss concealment
Full-duplex audio
Echo cancellation (G.165 and G.168)
Voice activity detection (VAD)
Silence suppression
Comfort noise generation (CNG)
Attenuation and gain adjustments
Flash hook timer
Message waiting indicator (MWI) tones
Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK)
Polarity control
Hook flash event signaling
Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards
Institute (ETSI)
Streaming audio server: Up to 10 sessions
Music on hold
Call waiting, call waiting and caller ID
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 5
Specifications*
Description
Caller ID with name and number
Caller ID blocking
Selective and anonymous call rejection
Call forwarding: No answer, busy, and all
Do not disturb
Call transfer, call return, and call back on busy
Three-way conference calling with local mixing
Per-call authentication and associated routing
Call blocking with toll restriction
Distinctive ringing: Calling and called number
Off-hook warning tone
Advanced inbound and outbound call routing
Hotline and warmline calling
Long silence (configurable time setting) silence threshold
Disconnect tone (for example, reorder tone)
Configurable ring frequency
Ring validation time setting
Tip and ring voltage adjustment setting
Ring indication delay setting
Fax capability
Fax tone detection pass-through
Fax pass-through using G.711
Real-time fax over IP using T.38 fax relay (T.38 support is dependent on fax machine and network and transport
resilience)
Security
Password-protected system reset to factory default
Password-protected administrator and user access authority
Provisioning, configuration, and authentication
HTTPS with factory-installed client certificate
HTTP digest: Encrypted authentication using MD5 (RFC 1321)
Up to 256-bit Advanced Encryption Standard (AES) encryption
SIP Transport Layer Security (TLS)
Provisioning, administration,
and maintenance
Web browser administration and configuration using integral web server
Telephone keypad configuration with interactive voice prompts
Automated provisioning and upgrade using HTTPS, HTTP, and Trivial File Transfer Protocol (TFTP)
TR-069
Asynchronous notification of upgrade availability using Notify
Nonintrusive, in-service upgrades
Report generation and event logging
Statistics in Bye message
Debug server records and syslog: Per-line configurable web browser
Ping and traceroute diagnostics
Configuration management: Backup and restore
Support for Bonjour
Physical interfaces
1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS phone ports for analog circuit telephone device (tip and ring)
Reset button
Subscriber line interface
circuit (SLIC)
Ring voltage: 40–90 Vpk configurable
Ring frequency: 20–25 Hz
Ring waveform: trapezoidal
Maximum ringer load: 5 ringer equivalence numbers (RENs)
On-hook voltage (tip and ring): –46 to –56V
Off-hook current: 18–25 mA
Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm
150 nF complex impedance
Frequency response: 300–3400 Hz
Return loss (600 ohm, 300–3400 Hz): up to 20 dB
Insertion loss (1 Vrms at 1 kHz): 3–4 dB
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 5
Specifications*
Description
Total harmonic distortion (THD) (350 mV peak at 300 Hz): up to 3%
Idle channel noise: 72 dB (typical)
Longitudinal balance: 55 dB (typical)
Off-hook threshold (line seizure): Rdc < 1000 ohm
On-hook threshold (line release): Rdc >10000 ohm
Rdc DC supervisory range: Rdc > 450 ohm
Regulatory compliance
FCC (Part 15 Class B), CE, ICES-003, A-Tick certification, Restriction of Hazardous Substances (RoHS), and
UL
Power supply
DC input voltage: 5V DC at 2.0A maximum
Power consumption: 5W
Switching type (100–240V) automatic
Power adapter: 100–240V and 50–60 Hz (26–34 VA) AC input, with 1.8m cord
Indicator lights and LEDs
Phone 1, phone 2, Internet, and power
Documentation
Quick Start Guide
Administration Guide (available online)
Provisioning Guide (available online)
Environmental
Dimensions (W x H x D)
3.98 x 3.98 x 1.10 in. (101 x 101 x 28 mm)
Unit weight
5.40 oz (153 g)
Operating temperature
32 to 113ºF (0 to 45ºC)
Storage temperature
–77 to 158ºF (–25 to 70ºC)
Operating humidity
10 to 90% noncondensing
Storage humidity
10 to 90% noncondensing
Package Contents
Cisco SPA112 2 Port Phone Adapter
5V/2A power adapter
6-ft (1.83m) Ethernet cable
Quick Start Guide
CD with documentation, including license and warranty
Product Warranty
1-year limited hardware warranty with return-to-factory replacement and 90-day limited software warranty
Cisco Small Business Support Service for the Cisco SPA112 2 Port Adapter
The Cisco Small Business Support Service provides “peace of mind” coverage at an affordable price and helps
you get the most value from your Cisco Small Business solution. This device-level, subscription-based service
includes software upgrades and updates, extended access to the Cisco Small Business Support Center, and nextbusiness-day hardware replacement as necessary. It also provides community-based support to enable small
businesses to share knowledge and collaborate using online forums and wikis to help boost business efficiency,
identify and reduce risks, and serve customers better.
For More Information
For more information about Cisco Small Business solutions, visit www.cisco.com/go/smallbusiness. For more
information about the Cisco SPA 100 Series, visit www.cisco.com/go/gateways or contact your local Cisco account
representative.
Printed in USA
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-691106-00
10/11
Page 5 of 5

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement