ProMariner 05150 System information
Electrical
Alternators ............................. 203
Smart choice for power™
Battery Boxes ........................ 217
Battery Cable ......................... 231
Battery Chargers ............ 204-208
CRANK UP-TO 120A
GLOBALLY!
Battery Monitors ............. 213-216
Battery Switches............. 196-200
Bus Bar ............................ 186-188
Cable Lugs ............................. 235
Cable Ties....................... 242, 243
Charging Relays ............. 199-201
Circuit Breakers .............. 177-180
60A
40A
Circuit Breaker Panels ... 167-176
80A
DC Sockets & Plugs ....... 218-224
30A
20A
Electrical Panels ............. 167-176
40A
20A
100A
50A
10A
10A
Fuse Blocks .................... 180-182
Fuse Holders .................. 182, 183
60A
24V OUTPUT
Electrical Wire ................. 231-234
120A
12V OUTPUT
Fuse Panels.... 171, 172, 181, 182
Fuses .............................. 184, 185
Heat Shrink...................... 238-240
Inverters .......................... 208-213
Isolators.......................... 201, 202
Meters ...................... 213-216, 245
Battery Chargers
Regulators .............................. 202
Shore Power.................... 221-227
Solar Panels ........................... 208
Switches .......................... 190-195
Terminal Blocks .............. 186-188
Tools ................................ 245-247
Windshield Wipers ......... 248-252
Wire Crimp Connectors . 235-239
The new generation TRUECharge2 models, both 12V and 24V are now equipped
with parallel stacking feature. This enables two chargers* to work together to
combine the output, achieving up to 120A and 60A for large 12V and 24V
battery banks respectively. The new models accept 90-265 Vac, 47-63 Hz for
global operation and are housed in an efficient, compact design.
*Must be either 12V or 24V; does not apply to 12V/10A model. 12V (80A, 100A, 120A)
& 24V (40A, 50A, 60A) achieved through stacking.
© 2011 Xantrex Technology USA Inc. All rights reserved. Xantrex, TRUECharge and Smart choice for power are
trademarks of Schneider Electric Services International sprl, registered in the United States and other countries.
www.xantrex.com
EXPLORE MORE. It’s comforting
to know that our inlets, cordsets,
adapters and accessories will
keep you connected to reliable
shore power, whether you’re in
South Beach or South Africa.
That’s because there is no other
company that provides as many
solutions to keep you connected
as the Global Marine Group of
Actuant Electrical.
marinco.com
MAR_AD_020_0112
Electrical
360 PANEL SYSTEM
167
The 360 Panel System uses modular architecture to mount a broad selection of panel
modules, allowing multiple functions to be combined in a single panel. This design can
accommodate future changes and permits rapid assembly and shipping time. With
options ranging from battery management to source selection, the 360 Panel System
offers unmatched flexibility. For more 360 panel options, contact our Sales Department.
360 DC PUSH BUTTON
BREAKER PANELS
Includes 4205 square format label set
15A circuit breakers installed
All circuit positions are backlit
BSS1450
BSS1452
4.875 W x 4.75 H,
8 breakers
360 120 VOLT
AC SOURCE SELECTOR
Switch 2 sources
50A main CB capacity
2 x 30A double pole circuit breakers
installed
BSS1208
4.875 W x 4.75 H
4.875 W x 7.75 H,
16 breakers
360 120 VOLT AC MAIN
360 DC SWITCH
BREAKER PANELS
10 amp push button circuit breakers installed
Rocker switches to control circuits
BSS1455
BSS1457
4.875 W x 4.75 H,
4 switches & breakers
Flat rocker circuit breakers
All circuit label positions are backlit
ON indicating LEDs in all circuit positions
Includes 4206 square format label set
30A double pole circuit breaker installed
BSS1214
BSS1202
4.875 W x 4.75 ,
2 breakers
4.875 W x 7.75 H,
6 breakers
4.875 W x 7.75 H,
8 switches & breakers
360 120 VOLT AC 4 POSITION
Four 15 amp circuit breakers installed
All circuit label positions are backlit
ON indicating LEDs installed in all positions
BSS1210
4.875 W x 4.75 H
360 DC M-SERIES DUAL
CIRCUIT PLUS MAIN 3
POSITION CLB VERTICAL
Incorporates M-Series Dual Circuit Plus battery
switch
Includes 4218 square format label set
3 breakers
BSS1409
4.875 W x 7.75 H
DC DIGITAL VOLTMETER
Includes full-size 2-3/4 8235 DC Digital
Voltmeter
3 position switch for multiple battery banks
BSS1474
4.875 W x 4.75 H
360 12 VOLT DC PANEL
Includes 4205 square format label set
Flat rocker circuit breakers
All circuit label positions are backlit
ON indicating LEDs in all circuit positions
BSS1216
BSS1200
BSS1225
BSS1224
BSS1223
BSS1217
BSS1222
BSS1201
4.875 W x 4.75 H, 4 breakers
4.875 W x 7.75 H, 8 breakers
9.25 W x 4.75 H, 8 breakers
9.25 W x 7.75 H, 8 breakers
4.875 W x 10.75 H, 12 breakers
9.25 W x 7.75 H, 12 breakers
9.25 W x 7.75 H, 16 breakers
13.625 W x 7.75 H, 16 breakers
360 12 VOLT DC MAIN PANELS
100A Main C-Series Flat Rocker Circuit Breaker 7549
15A Branch A-Series Flat Rocker Circuit Breakers 7403
DC Digital Multimeter 8248
Square Format 30 DC Label Set 4205
BSS1221 Main 19 position, 13.63 W x 7.75 H x 4 D
BSS1226 Main 31 position, 13.63 W x 10.75 H x 4 D
168
Electrical
▼DC CIRCUIT BREAKER PANELS
3 POSITION DC
CIRCUIT BREAKER PANEL
3 Total circuit breaker positions, 3 15A toggle circuit breakers
installed. Fully pre-wired & backlit. Includes 30 common DC
labels.
ON indicating LEDs installed in all circuit positions
Voltage
12/24 Volts DC
Amperage
Panel Main Bus 100A
Dimensions 3-3/4 high x 5-1/4 wide
BSS8025
8 POSITION DC
CIRCUIT BREAKER PANEL
8 Total circuit breaker positions, 5 15A toggle
breakers installed. Fully pre-wired & backlit.
Includes 30 common DC labels.
ON indicating LEDs installed in all circuit positions
Voltage
12/24 Volts DC
Amperage
Panel Main Bus 100A
Dimensions 7-1/2 high x 5-1/4 wide
BSS8023
8 POSITION DC
CIRCUIT BREAKER PANEL
5 POSITION DC
CIRCUIT BREAKER PANELS
8 Total circuit breaker positions, 6 x 15A toggle circuit
breakers installed. Fully pre-wired & backlit. Includes 30
common DC labels.
ON indicating LEDs installed in all circuit positions.
Voltage
12-24 VDC
Amperage
Panel main Bus 100A
Dimensions
10.5 W x 1.5 H
BSS8385
5 Total circuit breaker positions, 5 15A toggle breakers installed.
3 position switch for multiple battery banks
Fully pre-wired & backlit. Includes 30 common DC labels.
ON indicating LEDs installed in all circuit positions
Voltage
12/24 Volts DC
Amperage
Panel Main Bus 100A
Dimensions 7-1/2 high x 5-1/4 wide
BSS8081
BSS8401
Analog 8-16V Voltmeter &0-50A Ammeter with shunt
Digital multimeter displays amperes to 500A, voltage to
60V. with high and low voltage alarms
10 POSITION DC
CIRCUIT BREAKER PANELS
6 POSITION DC
HORIZONTAL CIRCUIT BREAKER PANEL
6 total circuit breaker positions, 6 x 15A toggle breakers installed.
Fully pre-wired & backlit. Includes 30 common DC labels.
ON indicating LEDs installed in all circuit positions
Voltage
12 Volts/24Volts DC
Amperage
Panel Main Bus 100A
Dimensions 3-3/4 high x 10-1/2 wide
BSS8096
10 Total circuit breaker positions, 7 x 15A toggle circuit breakers
installed. 3 position switch for multiple battery banks
Fully pre-wired & backlit. Includes 30 common DC labels.
ON indicating LEDs installed in all circuit positions
Voltage
12/24 Volts DC
Amperage
Panel Main Bus 100A
Dimensions 11-1/4 high x 5-1/4 wide
BSS8082
BSS8402
With analog 8-16V Voltmeter and 0-50A Ammeter with
remote shunt
With digital multimeter displays amperes to 500A,
voltage to 60V. with high and low voltage alarms
Electrical
169
▼DC CIRCUIT BREAKER PANELS
12 POSITION DC
CIRCUIT BREAKER PANEL
12 Total circuit breaker positions, 10 15A toggle circuit
breakers installed. Fully pre-wired & backlit. Includes 30
common DC labels.
ON indicating LEDs installed in all circuit positions.
Voltage
12-24VDC
Amperage
Panel main Bus 100A
Dimensions
14.75 W x 4.5 H
BSS8375
20 POSITION DC MAIN
CIRCUIT BREAKER PANEL
20 Total circuit breaker positions, 14 15A toggle circuit breakers & 1
100 amp C-Series main installed. Fully pre-wired & backlit. Includes
30 common DC labels. Digital multimeter displays amperes to 500A,
voltage to 60V with high and low voltage alarms.
ON indicating LEDs installed in all circuit positions
Voltage
12 -24VDC
Amperage
Panel main Bus 100A
Dimensions 14.75 W X 7.5 H
BSS8379
13 POSITION DC
CIRCUIT BREAKER PANEL
13 Total circuit breaker positions,
10 15A toggle circuit breakers installed.
Fully pre-wired & backlit. Includes 30
common DC labels.
ON indicating LEDs installed
in all circuit positions
Voltage
12-24 VDC
Amperage
Panel main Bus 100A
Dimensions
5.25 W x 11.25 H
BSS8376
24 POSITION DC
CIRCUIT BREAKER PANEL
24 total circuit breaker positions, 15 toggle breakers installed.
Fully pre-wired & backlit. Includes 30 common DC labels.
ON indicating LEDs installed in all circuit positions
Voltage
12 V/24V DC
Amperage
Panel main Bus 100A
Dimensions 7-1/2 H x 15-3/4 W
BSS8264
13 POSITION DC
CIRCUIT BREAKER PANELS
13 Total circuit breaker positions, 10 15A toggle breakers installed.
Voltmeter with 3 position switch for multiple battery banks
Fully pre-wired & backlit. Includes 30 common DC labels.
ON indicating LEDs installed in all circuit positions
Voltage
12 Volts DC
Amperage
Panel Main Bus 100A
Dimensions 7-1/2 high x 10-1/2 wide
BSS8068
BSS8403
Analog 8-16V Voltmeter and 0-50A Ammeter with shunt
Digital multimeter displays amperes to 500A, voltage to
60V. with high and low voltage alarms
35 POSITION DC MAIN
CIRCUIT BREAKER PANEL
35 Total circuit breaker positions, 26 15A toggle circuit breakers & 1
100 amp C-Series main installed. Fully pre-wired & backlit. Includes
30 common DC labels. Digital multimeter displays amperes to 500A,
voltage to 60V with high and low voltage alarms.
ON indicating LEDs installed in all circuit positions
Voltage
12-24 VDC
Amperage
Panel main Bus 100A
Dimensions 14.75 W x 11.25 H
BSS8382
170
Electrical
▼DC CIRCUIT BREAKER/SWITCH PANELS
DC CIRCUIT BREAKER PANELS
Marine Grade powder coated aluminium
Airpax circuit breakers
Stylish Contour Design facia
Green LED backlit labels, label set supplied
Red LED indicates systems on
Panels meet ABYC standards
BEP900
BEP901V
BEP901H
Pos. Breakers
Size HxWxD
4
8
8
115x127x65mm
115x127x65mm
115x127x65mm
1x5A, 2x10A, 1x15A
2x5A, 2x10A, 3x15A, 1x20A
2x5A, 2x10A, 3x15A, 1x20A
CONTURA WATERPROOF
DC CIRCUIT BREAKER PANELS
Designed for flybridge and open cockpit applications.
Panel front is rated IP66 Protected against powerful water jets
Ignition protected safe for powered boats
ON-OFF Contura Switches
ON indicating LEDs embedded in switch
Watertight mounting gasket
Push Button Reset-Only circuit breakers with waterproof boots
Includes set of 60 common DC labels.
NOTE Waterproof panel labels are not backlit
Voltage
12 or 24 Volts DC
Switch Rating
20A
12V 15A
24v DC
Breaker Rating
15A
BSS8274
BSS8374
BSS8272
BSS8372
BSS8273
BSS8373
BSS8271
BSS8371
WEATHERDECK WATER RESISTANT
DC CIRCUIT BREAKER PANELS
Designed for flybridge and open cockpit applications and constructed
from corrosion/UV resistant materials.
Independent label backlighting circuit for remote switching and
dimming
Rated IP67 - Temporary Immersion
Each panel can be mounted in four different orientations
Integrated switch guards prevent accidental switching
Includes 4215 - 30 Square Format Labels
Voltage
12 or 24 Volts DC
Breaker Rating
15A per circuit 12VDC 9A
24VDC
Pos.
Colour
Dimensions
BSS4374
BSS4376
BSS4378
BSS4384
BSS4386
4
6
8
4
6
Grey
Grey
Grey
White
White
4.5
4.5
4.5
4.5
4.5
W x 4.3 H
Wx6H
W x 7.75 H
W x 4.3 H
Wx6H
Colour
Pos. Dimensions
Orientation
White
Black
White
Black
White
Black
White
Black
3
3
4
4
6
6
8
8
Vertical
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Horizontal
3-3/4”W x 4-1/2”H
3-3/4”W x 4-1/2”H
4-1/4”W x 5-1/4”H
4-1/4”W x 5-1/4”H
4-1/2”W x 7-1/2”H
4-1/2”W x 7-1/2”H
4-1/4”W x 9-3/8”H
4-1/4”W x 9-3/8”H
C-SERIES HIGH-LOAD DC
TOGGLE CIRCUIT BREAKER PANELS
150 to 300 Ampere range provides overcurrent protection previously
only available in fuses for Bow Thrusters, Inverters, Windlasses.
Combines switching and circuit protection into a single device.
Trip Free - cannot be held closed after trip
Heavy 1/8 aluminum 5052 alloy
Two-part polyurethane slate gray finish
ON indicating LEDs installed
Dimensions 5-1/4 H x 3-3/4 W
BSS7262
BSS7263
BSS7264
BSS7265
BSS7266
150A DC C-Series 2 pole
175A DC C-Series 2 pole
200A DC C-Series 2 pole
250A DC C-Series 3 pole
300A DC C-Series 3 pole
Electrical
171
▼DC CIRCUIT BREAKER/SWITCH PANELS
6-GANG DC
CIRCUIT BREAKER PANEL
6-GANG DC ALUMINIUM
CIRCUIT BREAKER PANEL
Fire resistant injection molded nylon.
Illuminating switches. Supplied with 2-3A,
2-6A, 1-8A and 1-10A thermal AC/DC circuit
breakers. Additional sizes available.
6-1/2 x 4-1/2
Illuminating switches. Supplied with 2-3A, 2-6A,
1-8A and 1-10A thermal AC/DC circuit breakers.
Additional sizes available.
6-1/2 x 4-1/2
422800
424800
▼DC FUSED SWITCH PANELS
WEATHERDECK
WATER RESISTANT FUSE PANELS
Designed for flybridge and open cockpit applications and
constructed from corrosion/UV resistant materials.
Integrated ATO/ATC fuse based circuit protection
Independent label backlighting circuit for remote switching and
dimming
Rated IP67 - Temporary Immersion
Each panel can be mounted in four different orientations
Integrated switch guards prevent accidental switching
Includes 4215 - 30 Square Format Labels
Voltage
12 Volts DC
Fuse Rating 15A max per circuit
Pos. Colour Dimensions
BSS4302
BSS4304
BSS4306
BSS4308
BSS4312
BSS4314
BSS4316
BSS4318
2
Grey
3-7/8 W x 2-5/8 H
4
Grey
3-7/8 W x 4-5/16 H
6
Grey
3-7/8 W x 6 H
8
Grey
3-7/8 W x 7-11/16 H
2
White
3-7/8 W x 2-5/8 H
4
White
3-7/8 W x 4-5/16 H
6
White
3-7/8 W x 6 H
8
White
3-7/8 W x 7-11/16 H
CONTURA SWITCH
WATERPROOF FUSE PANELS
Designed for flybridge and open cockpit applications.
Will withstand the water exposures normally encountered in above deck
applications salt spray, rain, hose washdowns, momentary immersions
ON-OFF Contura Switches
ON indicating LEDs embedded in switches
Watertight mounting gasket included
Countersunk mounting holes throughout
Heavy 1/8 aluminum material
Includes set of common DC labels
NOTE Waterproof panel labels are not backlit
Voltage
12 or 24 Volts DC
Switch Rating
20A
12V 15A
24v DC
Fuse holder Rating
20A max per circuit
BSS8053
BSS8054
BSS8261
BSS8262
Colour
Pos.
Dimensions
Orientation
Grey
6
7-1/2 H x 5-1/4 W
Vertical
Grey
3
3-3/4 H x 5-1/4 W
Vertical
Grey
8
3-3/4 H x 9-3/8 W
Horizontal
Grey
4
3-3/4 H x 5-1/4 W
Horizontal
SPRAY PROOF FUSE PANEL
SPLASH GARDE
VERTICAL FUSE PANELS
Ideal where panel front is subject to light spray
and water. Not designed for total immersion.
Mounting gasket included.
Panel rating 12 volts, 37 amps total.
Individual circuit 10 amps maximum.
Preprinted labels and fuses are included.
424116
424016
6 circuits, 6-1/2 H x 4-1/2 W
4 circuits, 4-13/16 H x 4-1/2 W
Switches protected by neoprene rubber boots
Green LED Back-lit labels
Red LED’s for systems on
Waterproof to IP56 rating
Removable cover plate over switches conceals
screws & water drain
Switch current rating 20Amps DC
Supplied standard with label set
6.25 H x 4.4 W x 2.5 D
BEPCSP6-F
172
Electrical
▼DC FUSED SWITCH PANELS
ALUMINIUM FUSED SWITCH PANEL
With illuminating small rocker switches. Panel rating 35 amps, individual circuit 7 amps.
422010
422110
422210
422310
422510
Description
Dimensions
4 Circuit panel
4-7/8 H x 4-1/2 W
Orientation
6 Circuit panel
6-1/2 H x 4-1/2 W
Vertical
6 Circuit panel
2-1/2 H x 3-1/4 W
Horizontal
3 Circuit w/ Batt. test meter & Cig. lighter
6-1/2 H x 4-1/2 W
Vertical
3 Circuit w/ Batt. test meter & horn button
6-1/2 H x 4-1/2 W
Vertical
Vertical
NYLON FUSED SWITCH PANEL
Fire resistant injection molded black nylon with illuminating switches
Panel rating 37 amps total
Individual circuit 10 amps maximum
Label assortment included
424010
424110
424210
424310
424510
Description
Dimensions
4 Circuit panel
4-7/8 H x 4-1/2 W
Orientation
Vertical
6 Circuit panel
6-1/2 H x 4-1/2 W
Vertical
6 Circuit panel
2-1/2 H x 3-1/4 W
Horizontal
3 Circuit w/ Batt. test meter & Cig. lighter
6-1/2 H x 4-1/2 W
Vertical
3 Circuit w/ Batt. test meter & horn button
6-1/2 H x 4-1/2 W
Vertical
ALUMINIUM FUSED ROCKER SWITCH PANELS
Rocker Switch Panel includes Illuminating Rocker Switches
rated at 25A 12VDC or rated at 15A 24VDC.
425160
425144
425146
Description
Dimensions
6 Circuit panel 1 switch is DPDT
7-1/2 H x 5-1/4 W
Orientation
Vertical
4 Circuit panel w/power socket & horn button 7-1/2 H x 5-1/4 W
Vertical
4 Circuit panel w/2 x power sockets
Vertical
7-1/2 H x 5-1/4 W
▼AC/DC CIRCUIT BREAKER PANELS
AC/DC 6AC / 15DC POSITION
CIRCUIT BREAKER PANEL
15 Total DC circuit breaker positions, 9 x 15A DC toggle breakers
DC 100A main and 6 Total AC circuit breaker positions, 6 15A
AC toggle breakers & DC main installed 2-30A double pole
AC main breakers installed with lockout slide. Fully pre-wired &
backlit. Includes 30 common AC & DC labels. ON indicating LEDs
installed in all circuit positions & Red reverse polarity indicating LED
Installed meters
0-50A DC ammeter with remote sensing coil
0-150V AC voltmeter
8-16V DC voltmeter with 3 position switch for multiple battery banks
Voltage
12 Volts DC / 120V AC
Amperage
Panel Main Bus 100AAC/100ADC
Dimensions 10 H x 14-3/4 W
BSS8084
AC/DC 12AC / 7DC POSITION
CIRCUIT BREAKER PANEL
MAINS
7 Total DC circuit breaker positions, 4 x 15A DC toggle breakers DC
100A main and 12 Total AC circuit breaker positions, 9 15A AC toggle
breakers & DC main installed 2-30A double pole AC main breakers
installed with lockout slide. Fully pre-wired & backlit. Includes 30 common
AC & DC labels. ON indicating LEDs installed in all circuit positions &
Red reverse polarity indicating LED
Installed meters
0-50A AC ammeter with remote sensing coil
0-150V AC voltmeter
8-16V DC voltmeter with 3 position switch for multiple battery banks
Voltage
12 Volts DC / 120V AC
Amperage
Panel Main Bus 100AAC/100ADC
Dimensions 10 H x 14-3/4 W
BSS8085
Electrical
▼AC/DC CIRCUIT BREAKER PANELS
AC/DC 12AC / 19DC POSITION
CIRCUIT BREAKER PANEL
19 Total DC circuit breaker positions, 13 x 15A DC toggle breakers DC 100A
main and 12 Total AC circuit breaker positions, 6 x 15A AC toggle breakers & DC
main installed 2-30A double pole AC main breakers 3 sources installed with
lockout slide.
Fully pre-wired & backlit. Includes 30 common AC & DC labels. ON indicating
LEDs installed in all circuit positions & Red reverse polarity indicating LED
Installed meters
0-50A DC ammeter with remote sensing coil
0-50A AC ammeter with remote sensing coil
8-16V DC voltmeter with 3 position switch for multiple battery banks
0-150V AC voltmeter
Dimensions
11-1/2 H x 19-1/2 W
BSS8086
▼AC CIRCUIT BREAKER PANELS
4 POSITION AC MAIN
HORIZONTAL CIRCUIT BREAKER PANEL
3 POSITION AC
CIRCUIT BREAKER PANEL
3 Total circuit breaker positions, 3 15A toggle breakers installed.
Fully pre-wired & backlit. Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions 3-3/4 H x 5-1/4 W
4 Total circuit breaker positions, 4 x 15A toggle breakers &
1 x 30A Double-pole AC main installed.
Fully pre-wired & backlit. Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions & Red reverse
polarity indicating LED on AC main
Voltage
120 Volts AC
Amperage
Panel Main Bus 100 A
Dimensions
3-3/4 H x 10-1/2 W
BSS8099
BSS8058
6 POSITION AC
HORIZONTAL CIRCUIT BREAKER PANEL
6 Total circuit breaker positions, 6 15A toggle breakers installed.
Fully pre-wired & backlit. Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions
Voltage
120 Volts AC
Amperage
Panel Main Bus 100 A
Dimensions 3-3/4 high x 10-1/2 wide
BSS8097
3 POSITION AC MAIN
CIRCUIT BREAKER PANEL
3 Total circuit breaker positions, 3 x 15A toggle breakers &
1 x 30A Double-pole AC main installed. Fully pre-wired & backlit.
Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions & Red reverse
polarity indicating LED on AC main
Voltage
12 Volts AC
Amperage
Panel Main Bus 30A
Dimensions
7-1/2 H x 5-1/4 W
BSS8043
BSS8405
With 0-150V AC analog voltmeter
With digital 0-150A / 80-270V multimeter w/ alarms
6 POSITION AC MAIN
CIRCUIT BREAKER PANEL
6 Total circuit breaker positions, 3 x 15A toggle
breakers & 1 x 30A Double-pole AC main
installed. Fully pre-wired & backlit. Includes
30 common AC labels. ON indicating LEDs
installed in all circuit positions & Red reverse
polarity indicating LED on AC main
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions 7-1/2 H x 5-1/4 W
BSS8027
173
174
Electrical
▼AC CIRCUIT BREAKER PANELS
9 POSITION AC
SOURCE SELECTOR
CIRCUIT BREAKER PANEL
6 POSITION AC MAIN
HORIZONTAL CIRCUIT BREAKER PANEL
6 Total circuit breaker positions, 4 x 15A toggle breakers &
1 30A Double-pole AC main installed. Fully pre-wired & backlit.
Includes 30 common AC labels ON indicating LEDs installed in all
circuit positions & Red reverse polarity indicating LED on AC main
Voltage
120 Volts AC
Amperage
Panel Main Bus 100 A
Dimensions
4.5 H x 10.5 W
BSS8412
8 POSITION AC
CIRCUIT BREAKER PANEL
8 Total circuit breaker positions, 5 x 15A toggle breakers installed.
Fully pre-wired & backlit. Includes 30 common AC labels. ON
indicating LEDs installed in all circuit positions
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions 7-1/2 H x 5-1/4 W
BSS8059
9 Total circuit breaker positions, 6 x 15A toggle
breakers
& 2-30A double pole AC main breakers installed
with slide to prevent connecting multiple AC sources
simultaneously. Fully pre-wired & backlit. Includes 30
common AC labels. ON indicating LEDs installed in
all circuit positions & Red reverse polarity indicating
LED on AC source selector.
Voltage
120 Volts AC
Amperage
Maximum panel amperage - 50 A
Dimensions
11-1/4 H x 5-1/2 W
BSS8466
11 POSITION AC MAIN
CIRCUIT BREAKER PANEL
11 Total circuit breaker positions, 8 x 15A toggle breakers &
1 30A Double-pole AC main installed.
Fully pre-wired & backlit. Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions & Red reverse
polarity indicating LED on AC main
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions
7-1/2 H x 10-1/2 W
BSS8076
BSS8407
8 POSITION AC MAIN
CIRCUIT BREAKER PANEL
8 Total circuit breaker positions, 5 x 15A toggle breakers & 1 x 30A
Double pole AC main installed. Fully pre-wired & backlit. Includes
30 common AC labels. ON indicating LEDs installed in all circuit
positions & Red reverse polarity indicating LED on AC main
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions
11-1/4 H x 5-1/4 W
BSS8074
BSS8488
BSS8406
With analog 0-150V AC voltmeter & 0-50A ammeter
With 0-150VAC analog meter
With digital 0-150A / 80-270V multimeter w/alarms
With analog 0-150V AC voltmeter & 0-50A ammeter
With digital 0-150A / 80-270V multimeter
& high and low Volt / Amp alarms
24 POSITION AC
CIRCUIT BREAKER PANEL
24 Total circuit breaker positions, 15 x 15A toggle breakers installed.
Fully pre-wired & backlit. Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions
7-1/2 H x 15-3/4 W
BSS8265
Electrical
175
▼AC CIRCUIT BREAKER PANELS
AC MAIN CIRCUIT BREAKER PANEL
Double-pole AC main toggle circuit breaker with
reverse polarity indicating LED
Safety ground screw on panel back
Backlit label
Trip Free design cannot be held ON during
fault current condition
Dimensions 3-3/4 H x 2-5/8 W
BSS8077
BSS8079
BSS8179
ELCI MAIN 30A DOUBLE POLE PANELS
One 30A AC ELCI Main Residual Current Circuit Breaker,
leakage trip amperate - 30 mA
ELCI provides overcurrent and leakage protection per ABYC
E-11 for whole boat shore power protection
Red Reverse Polarity LED
Includes 8031 AC Panel Basic Large Format Label Set
All circuit label positions are backlit
ON indicating LEDs
Voltage
120 Volts AC
BSS8100
BSS8101
BSS8102
50 Amp 120V
50 Amp/230V
AC SOURCE SELECTOR PANEL
Allows connecting two different AC sources to a circuit and Prevents
connecting both AC sources simultaneously 2 Double-pole AC
main circuit breakers with lockout slide installed. Fully pre-wired &
backlit. 2 Green Power available indicating LED s & reverse polarity
indicating LED.
Voltage
120 Volts AC
Dimensions 3-3/4 H x 5-1/4 W
BSS8032
BSS8061
30 Amp Toggle breaker
50 Amp Toggle breaker
30A main 5.25 x 4.75
30A main
2 x15A & 3 blank 5.25 x 7.5
30A main
2 x15A & analog voltmeter 5.25 x 7.5
1 POSITION AC
MAIN BREAKER PANEL
1 Total circuit breaker position blank & 1 x 30A Double-pole AC main
installed. Fully pre-wired & backlit. Includes 30 common AC labels.
ON indicating LEDs installed in all circuit positions & Red reverse
polarity indicating LED on AC main
Voltage
120 Volts AC
Amperage
Panel Main Bus 100A
Dimensions 3-3/4 H x 5-1/4 W
BSS8029
BSS3029
30 Amp 120V
White toggle breaker
Black toggle breaker
AC SOURCE
SELECTION PANEL
6337 switch installed
Two-part polyurethane slate grey finish
Red reverse polarity LED indicators
Green power available LED indicators
Max.
Max.
of AC
voltage
amps Depth Width sources
BSS8361
BSS8363
BSS8365
BSS8366
BSS8367
BSS8386
BSS8369
120/240V
65
5-1/2
5-1/4
3
120/240V
65
3-5/8
5-1/4
2
120V
65
2-3/8
5-1/4
2
120V
32
2-3/8
5-1/4
3
120V
32
2
5-1/4
2
120V
30
3
5-1/4
2
120V
65
4-1/2
5-1/4
Switches between 2 - 120 Volt AC shore power sources and
1 - 240 Volt AC source to 2 - 120 Volt AC load groups
AC ROTARY SWITCH
Compact solution when circuit protection is provided elsewhere
Allows connecting multiple AC sources to one circuit
Switches hot and neutral lines
600 volts AC max
Max.
of AC
amps Depth Width sources Poles
AC CIRCUIT BREAKER PANELS
MAIN
Ideal for AC Shore Power installations and On Board
Inverter installations. Includes reverse polarity indicator and Label set.
Voltage 110V AC
Breakers ACM2W 2 x 10A, 20A main
ACM6W 2 x 10A, 3 x 15A, 1 x 20A 20A main
BEP900-ACM2W-110V
BEP900-ACM6W-110V
2
6
Main 4-1/2 x 5 x 2-1/2
Main 7-7/8 x 5 x 2-1/2
BSS9009
BSS9010
BSS9011
BSS9019
BSS6337
BSS9077
BSS9093
32
1.91
1.89
2
2
32
2.41
1.89
3
2
65
2.41
2.52
2
2
65
3.65
2.52
2
3
30
2.98
1.89
2
4
65
5.50
2.52
3
3
65
4.50
2.52
4
Switches between 2 - 120 Volt AC shore power sources and
1 - 240 Volt AC source to 2 - 120 Volt AC load groups
176
Electrical
PUSH BUTTON
CIRCUIT BREAKER ADAPTER
Adapts Push Button Reset-Only Thermal Circuit
Breaker to Blue Sea Systems rocker panels and
new battery management panels
BSS4111
CIRCUIT BREAKER
PANEL PLUGS
SMS SURFACE MOUNT SYSTEM
Panel enclosure for ELCI Main circuit breakers and other large
frame devices. Meets ABYC E-11 when used with an ELCI Main
circuit breaker and mounted within 10 feet of the shore power inlet.
Clear cover allows easy view of circuit breaker status
Blank circuit positions accommodate Carling Technologies A
and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for back lighting and ON indication
Enclosure Size 6.0 x 6.0 x 4.0
Exterior Overall Dimensions 7.6 x 7.4 x 4.7
BSS3116
BSS3118
ELCI Main
3 Blank Circuit Positions, 120V 30A
ELCI Main
2 Blank Circuit Positions, 120V 50A
BSS8037
BSS4110
For toggle breakers 6/pk
For rocker breakers 1/pk
CIRCUIT BREAKER
MOUNTING SCREWS
Fits all single- and double-pole
A-, B and C-Series circuit breakers
6-32 x 1/4 Flat Head
BSS8035
6 pack
LED INDICATOR LIGHTS
AC LOCKOUT SLIDE
Allows only one of a pair of double-pole AC circuit
breakers to be activated at a time
Guarantees that AC power from two sources shore
power and genset or inverter will not be mixed
Fits all double-pole A- and B-Series circuit breakers
Uses circuit breaker mounting screw holes. Requires no
special panel modification
Includes mounting screws
BSS4125
BSS4126
BSS4130
BSS4131
AC 2 Position Lockout Slide
AC 3 Position Lockout Slide
Easily installed in any Blue Sea Systems circuit breaker panel
Simple push-in installation mounts in any thickness material
Useful as general indicator and alarm lights
11/64 mounting hole
BSS8033
BSS8034
BSS8066
BSS8134
BSS8171
BSS8172
Amber
12/24 VDC
Green
120 VAC
Red
120 VAC
Red
230 VAC
Red
12/24 VDC
Green
12/24 VDC
AC 2 Position 2 Pole for C Series breakers
AC 2 Position 3 Pole for C Series breakers
LED LIGHTS
TOGGLE GUARD
Protects circuit breakers from being
accidentally switched On or Off
Fits all single-pole A- and B-Series breakers
Can be used on any brand of circuit breaker
panel using standard A- or B-Series circuit
breakers
Uses circuit breaker mounting screw hole
BSS4100
3/16 diameter mounting hole
408110
408111
408112
408121
408122
Voltage
110 AC
110 AC
110 AC
12 DC
12 DC
Colour
Amber
Red
Green
Red
Green
PANEL BACK INSULATING COVERS
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
BSS4026
BSS4027
BSS4028
BSS4031
Cover for 5-1/4 x 3-3/4
Cover for 5-1/4 x 7-1/2
Cover for 10-1/2 x 7-1/2
Cover for 2 column x
10 positon
meter
LABEL BACKLIGHT SYSTEM
Easily installed in Blue Sea Systems circuit breaker panel
Connects to 12 Volt source via two 6 18 AWG wire leads
Voltage
12 Volts DC
Amperage Draw 5 Milliwatts per label
BSS8065
BSS8069
Backlight System 8/5/3 positions
Backlight System 10 position
Electrical
177
A-SERIES
TOGGLE CIRCUIT BREAKERS
PANEL LABELS KITS
Tough, weatherproof Lexan material
LARGE FORMAT
Used on traditional metal panels
& ST glass fuses blocks
BSS8031 AC basic 30 labels
BSS8030 DC basic 30 labels
BSS8039 DC extended 120 labels
The industry standard circuit breaker for Blue Sea Systems electrical
panels. Combines switching and circuit protection into a single device.
“Trip Free” design cannot be held “ON” during fault current condition
Circuit breaker type
Magnetic Hydraulic - trip free
Maximum Voltage
65 VDC / 250 VAC
Rated Switch Cycles
10,000
rated amperage and voltage
Amps
5 amps
10 amps
15 amps
20 amps
25 amps
30 amps
40 amps
SMALL FORMAT
Used on ST blade fuse blocks and most
Contura waterproof panels.
BSS8214
BSS8217
BSS7200
BSS7204
BSS7208
BSS7212
BSS7216
BSS7220
BSS7224
BSS7228
Red
White
BSS7201
BSS7205
BSS7209
BSS7213
BSS7217
BSS7221
BSS7225
BSS7229
BSS7202
BSS7206
BSS7210
BSS7214
BSS7218
BSS7222
BSS7226
BSS7230
Black, DC 60 labels
Gray, DC 60 labels
SQUARE FORMAT
For Weather Deck , battery
management & 360 panels
BSS4215
BSS4218
BSS4216
BSS4217
BSS4208
50 amps
Black
DC
DC
DC
DC
AC
30 labels
30 labels
60 labels
120 labels
120 labels
A-SERIES DOUBLE POLE
TOGGLE CIRCUIT BREAKERS
The industry standard circuit breaker for Blue Sea Systems electrical
panels. Used as AC main circuit breakers to switch both hot & neutral
legs. With neutral circuit on one pole and hot circuit on other pole,
both poles will trip if either pole trips. Combines switching and circuit
protection into a single device
Maximum Amperage
50 Amp
Maximum Voltage
250 VAC / 65V DC
Rated Switch Cycles
10,000
rated amperage and voltage
Black
10 amps
15 amps
20 amps
30 amps
40 amps
50 amps
DOUBLE POLE
RESIDUAL CURRENT CIRCUIT BREAKER
Responds to leakage of electrical current outside of the intended
circuit path.
A device that trips on leakages of nominally 5mA and meets certain
standards is called a Ground Fault Circuit Interrupter GFCI . A
device meeting the same standards but with a trip level of 30mA is
called an Electrical Leakage Circuit Interrupter ELCI . This device
below provides GFCI or ELCI protection.
Trips on short circuit, overload, or leakage to ground
Front panel mount installed in a power distribution panel
Designed for 120V 60-Cycle and 120/240V 60-Cycle applications.
BSS3100
BSS3102100
BSS3103
BSS3104
BSS3106100
GFCI Branch A-Series, 1-pole 15A flat rocker
ELCI Main A-Series, 2-pole 30A flat rocker
ELCI Main C-Series, 2-pole 50A flat rocker
ELCI Main C-Series, 3-pole 50A flat rocker
ELCI Main A-Series, 2-pole 30A white toggle
BSS7232
BSS7234
BSS7236
BSS7237
BSS7239
BSS7241
White
BSS7233
BSS7235
BSS7260
BSS7238
BSS7240
BSS7242
A-SERIES CIRCUIT BREAKER
BLANK PANELS
Slate gray matches standard panel color
1/8 aluminum 5052 alloy
Accepts Blue Sea Systems Large Format Panel label
2-5/8 W x 3-3/4 H
BSS8072
BSS8173
Single Pole
Double Pole
BLANK
CIRCUIT BREAKER PANELS
Control panels for standard toggle breakers.
ANC553002
ANC553008
Gang
Width
Height
2
2-11/16
4-1/4
8
5-3/8
8-1/2
178
Electrical
A-SERIES FLAT ROCKER
CIRCUIT BREAKERS
C-SERIES TOGGLE CIRCUIT BREAKERS
Rocker actuator is flush in the “ON” position, eliminating the risk of
accidental switching. “Trip Free” design cannot be held “ON” during
fault current condition. Prevents accidental switching of 24 hour
circuits. Colour actuator indicates “OFF” position.
Circuit breaker type
Magnetic Hydraulic - trip free
Maximum Voltage
240 Volts AC, 32 Volts DC
Rated Switch Cycles
10,000
rated amperage and voltage
Single pole
Double pole
BSS7400
BSS7401
BSS7402
BSS7403
BSS7404
BSS7405
BSS7406
BSS7407
BSS7408
Amps
5A
BSS7410
BSS7411
BSS7413
BSS7414
BSS7417
Provides overcurrent protection for inverters, bow thrusters, and
windlasses. Combines switching and circuit protection into a single
device. Trip Free cannot be held closed after trip.
Double and triple pole circuit breakers will trip all poles if any one pole
trips
Circuit breaker type
Magnetic Hydraulic - trip free
Rated Switch Cycles
10,000
rated amperage and voltage
DC C-SERIES BREAKERS
Double pole
Triple pole
BSS7267
BSS7268
BSS7269
8A
10A
15A
20A
25A
Amps
150A
175A
200A
BSS7270
BSS7271
250A
300A
AC/DC C-SERIES BREAKERS
Single pole
Amps
30A
40A
BSS7350
BSS7351
BSS7352
BSS7353
BSS7354
BSS7355
BSS7244
BSS7246
BSS7248
BSS7250
50A
5A
10A
15A
20A
25A
30A
50A
60A
80A
100A
AC C-SERIES BREAKERS
Meets ABYC requirements for 120/240 Volt 50A main protection
Double pole used as 120 volt AC main to switch hot to neutral
Triple pole used as 240 volt AC main to switch lines hot and neutral
Double pole
Triple pole
Amps
C-SERIES
FLAT ROCKER CIRCUIT BREAKERS
Rocker actuator is flush in the “ON” position, eliminating the risk of
accidental switching. Color actuator indicates “OFF” position. Provides
overcurrent protection for inverters, bow thrusters, and windlasses.
Combines switching and circuit protection into a single device.
“Trip Free” cannot be held closed after trip.
Ignition protected safe for installation aboard gasoline powered boats.
Rated Switch Cycles
10,000
rated amperage and voltage
Circuit breaker type
Magnetic Hydraulic - Trip Free
Terminal Stud
1/4 tin plated brass
Voltage
Single pole Max 32VDC / 240VAC
Double pole Max 48VDC
Triple pole Max 48VDC
Single pole
BSS7540
BSS7541
BSS7542
BSS7543
BSS7544
BSS7545
BSS7546
BSS7547
BSS7548
BSS7549
Double pole
5A
10A
15A
20A
25A
30A
50A
60A
80A
100A
BSS7475
BSS7551
BSS7476
BSS7365
BSS7251
BSS7254
BSS7256
BSS7258
BSS7287
BSS7288
BSS7289
BSS7290
30A
50A
60A
80A
100A
Triple pole
150A
175A
200A
BSS7477
BSS7554
250A
300A
BLANK C-SERIES
BREAKER MOUNTING PANELS
Designed for C-Series Toggle Circuit Breakers
Heavy 1/8 aluminum 5052 Alloy
Two-part polyurethane slate gray finish
Accepts standard Blue Sea Systems backlight labels
Accepts standard Blue Sea Systems ON indication LEDs
BSS8087 8 position, 5-1/4
BSS8088 3 position, 5-1/4
x 7-1/2
x 3-3/4
Electrical
187 SERIES
DC THERMAL CIRCUIT BREAKERS
179
PUSH BUTTON CIRCUIT BREAKERS
Incorporated into Blue Sea Systems water resistant
circuit breaker panels
Combines switching and circuit protection into a single device
Push to reset operation
Clear, single lever operation
Trip Free design cannot be held ON during fault current condition
Trip Free design cannot be held ON during fault current condition
Ignition protected - safe for installation aboard gasoline powered
Weatherproof
boats
Robust 5/16 M8 terminals provide high torque connections
Vapourproof -Ignition protected
Spade Terminal
Screw Terminal Amps
Self-trimming case eliminates need for mounting panels or trim bezels BSS7050
BSS2129
3A
Round case for easy installation with standard sized hole saw
BSS7052
BSS2130
5A
Voltage Rating
48 Volts DC max
BSS7053
BSS2131
7A
Panel mount
Surface mount
Amps
BSS7054
BSS2132
10A
BSS7035
BSS7135
25A
BSS7055
12A
BSS7036
BSS7136
30A
BSS7056
BSS2133
15A
BSS7037
BSS7137
35A
BSS7057
BSS2134
20A
BSS7038
BSS7138
40A
BSS7058
BSS2135
25A
BSS7039
BSS7139
50A
BSS7059
BSS2136
30A
BSS7040
BSS7140
60A
BSS7061
BSS2137
40A
BSS7041
BSS7141
70A
BSS7042
BSS7043
BSS7044
BSS7045
BSS7046
BSS7047
BSS7048
BSS7049
BSS7142
BSS7143
BSS7144
BSS7145
BSS7146
BSS7147
BSS7148
BSS7149
80A
BSS4135
BSS4136
BSS4137
90A
100A
110A
120A
Boot reset button clear
Boot reset button white
Boot reset button black
135A
PUSH BUTTON
THERMAL AC/DC CIRCUIT BREAKERS
150A
200A
Stamped Brass/Molded Bakelite.
285 SERIES
DC THERMAL CIRCUIT BREAKERS
Provides medium duty circuit protection for 25 to 200 Amp
loads when switching and circuit protection are both required.
Visible reset lever shows open condition
Trip-free cannot be held closed after trip
Drop in replacement for 185-Series Circuit Breakers
External ignition protection
Terminal Stud M6 accepts 1/4 Ring Terminal
Max Voltage 48V DC
Panel mount
Surface mount Amps
BSS7080
BSS7081
BSS7082
BSS7083
BSS7084
BSS7085
BSS7086
BSS7087
BSS7088
BSS7089
BSS7180
BSS7181
BSS7182
BSS7183
BSS7184
BSS7185
BSS7186
BSS7187
BSS7188
BSS7189
25A
40A
60A
Surface mount
70A
80A
100A
120A
150A
Panel mount
BEZEL MOUNT
For 285-Series Panel Mount Breakers 71xx
BSS7198
CIRCUIT BREAKER ADAPTER BEZEL
Allows circuit breaker mounting
in a 2-1/8 round hole
BSS7098
4 amps
6 amps
8 amps
10 amps
15 amps
20 amps
35 amps
Breaker Boot
MEDIUM DUTY PUSH BUTTON
RESET-ONLY CIRCUIT BREAKERS
30A
50A
420804
420806
420808
420810
420815
420820
420835
420839
UL Listed A-0701
Weatherproof
Can be used as Main, Branch, or 24 hour circuit protection
“Trip Free” design cannot be held “ON” during fault current condition
Terminal stud 10-32 Stainless steel
BSS2138
BSS2139
BSS2140
BSS2141
BSS2142
BSS2143
15A
20A
30A
40A
50A
60A
%QNG*GTUGG%Q
%QNG*GTUGG%Q
PLUG-IN
CYCLING CIRCUIT BREAKERS
Heavy duty replacement for ATC & ATO blade fuses.
Rated at 12 VDC.
30409-20BP
30409-30BP
20 amps
30 amps
180
Electrical
RESETTABLE CIRCUIT BREAKER
Resettable inline circuit breaker with manual reset button. Complies
with SAE Standard J553. Splash proof. May be used on 12V or 24V
systems.
420842
420843
420844
420845
20 amps
30 amps
40 amps
50 amps
%QNG*GTUGG%Q
%QNG*GTUGG%Q
CYCLING CIRCUIT BREAKERS WITH
10-32 stud. Rated at 12 VDC.
30055-20BP
30055-30BP
30055-40BP
MAXI
20 amps
30 amps
40 amps
FUSE BLOCK
ANL FUSE BLOCKS
Accepts 5 16 M8 ring terminals
Insulating cover satisfies ABYC/USCG insulation requirements
Cover breakouts allow wire access in any direction
Stainless steel studs provide resistance to corrosion and high torque
for excellent electrical contact.
Ideal for bow thrusters
5503
5005
Max voltage
32 Volts DC
32 Volts DC
Max Amperage
750 Amps
300 Amps
Cable size
Up to 4/0 AWG
Up to 2/0 AWG
Fuse Mounting Blocks Tin-Plated Copper Tin-Plated Copper
Dimensions
7 x 2 x 2-5/16 H 4.5 x 1-1/2 x 1-5/8 H
BSS5503
BSS5005
750 Amps max
300 Amps max
Snap-on terminal cover insulates all conductive parts,
satisfying ABYC/USCG requirements
Accepts wire sizes 18–4 AWG from sides or bottom
Terminal screws compress fuse blades for low
resistance connections
Max voltage
32 VDC
Max Amperage 80 Amps
Wire size
18–4 AWG
Dimensions
2-7/8 x 2
BSS5006
CLASS T FUSE BLOCK
MIDI OR AMI SAFETY FUSE BLOCK
Ignition protected for installation on gasoline/diesel powered boats
Sealed cover protects fuses from the harsh marine environment
Insulating cover satisfies ABYC/USCG insulation requirements
Cover breakouts allow wire access in any direction
Accepts Blue Sea square format standard or custom label
Fuses sold separately
Tin-Plated Copper fuse mounting blocks
Max voltage
Max Amperage
Max Cable size
Stud Size
BSS7720
32 VDC
200 Amps
2/0 AWG
8mm
Insulating cover satisfies ABYC/USCG insulation requirements
Cover breakouts allow wire access in any direction
Insert molded studs ensure secure fuse mounting
Stainless steel studs provide resistance to corrosion and high
torque for excellent electrical contact
Max voltage
160 Volts DC
Max Amperage
400 Amps
Terminal stud size
3/8 -16 M10
Cable size
Up to 4/0 AWG
Fuse Mounting Blocks Tin-Plated Copper
Dimensions
7 x 2 x 2.3 H
BSS5502
MEGA OR AMG SAFETY FUSE BLOCK
Ignition protected for installation aboard gasoline or diesel powered boats
TERMINAL FUSE BLOCK
Sealed cover protects fuses from the harsh marine environment
Isolated studs use M8 hardware & allows stacking of terminals
Insulating cover satisfies ABYC/USCG insulation requirements
Appropriate for DC Main, inverter, windlass, & bow thruster circuits
Cover breakouts allow wire access in any direction
Provides high current protection in tight spaces
Accepts Blue Sea Systems Square Format standard or custom label
Weatherproof
Fuses sold separately
Insulating cap prevents accidental shorts
Tin-Plated Copper fuse mounting blocks
Accepts 5 16 or 3 8 ring terminals
Max voltage
32 VDC
Max
Amperage
300 Amps DC
Max Amperage 300 Amps
Max Voltage
58 Volts DC
Max Cable size 2/0 AWG
Dimensions
1 Terminal 2.4 x 0.79 x 1.75 H
Stud Size
8mm
2 Terminal 3.48 x 0.79 x 1.75 H
BSS7721
BSS5191
BSS2151
1 Terminal stud
2 Terminal stud
Electrical
181
SAFETYHUB 100
FUSE BLOCK
Combines an ignition protected fuse block and integrated connecting
plugs. It consolidates seven circuits from 1A–200A, eliminates loose
wires, and protects fuses from explosive fumes. The SafetyHub100 is
ideal for vessels ranging from ski boats to offshore fishing boats.
3 30A 200A MIDI fuses & 4 1A 20A ATO /ATC fuses
Amperage
240 Amps total max
Voltage
12V DC
BSS7725 SafetyHub100
ST BLADE FUSE BLOCK SYSTEM
SAFETYHUB 150 FUSE BLOCK
The SafetyHub 150 is an ignition protected fuse block with screw
termination. Reduces wiring connections, and consolidates up to ten fused
circuits. It can be used for Main or Branch DC power distribution
Four 30A 200A MIDI /AMI fuses ideal for high-amp circuits including
panel feeds, windlasses, and stereo amplifiers
Six 1A 30A ATO /ATC fuses ideal for low-amp circuits including bilge
pumps, electronics, and lights
Sealed cover protects fuses from the harsh marine environment IP66
rating protected against powerful water jets
Negative bus provides common location for negative collection
Circuit identification label with write-on capability
Fuse puller easily removes ATO /ATC fuses
Cover provides storage space for two spare fuses
Ignition protected fusing meets Coast Guard and ABYC requirements for
installation on gasoline or diesel powered boats
Fuses sold separately
Amperage
350 Amps total max
Voltage
12V, 24V, 32V
Clear insulating cover recesses for small format Blue Sea labels
Cover insulates all conductive parts, meeting ABYC/USCG req.
Tin plated copper buses and fuse clips give 30A rating per circuit
Uses ATO and ATC fuses and plug-in style circuit breakers
20 write-on circuit labels included
Amperage
30A max per circuit / 100A max per block
Voltage
32V DC maximum voltage
Dimensions 5028/5033 3-5/8 H x 3-5/16 W x 1-1/2 D
5025/5030 4-7/8 H x 3-5/16 W x 1-1/2 D
5029/5034 5-1/4 H x 3-5/16 W x 1-1/2 D
5026 6-1/2 H x 3-5/16 W x 1-1/2 D
BSS5025
BSS5030
BSS5028
BSS5033
BSS5026
BSS5029
BSS5034
6 circuit w/ground,
6 circuit w/ground, no cover
6 circuit
6 circuit, no cover
12 circuit w/ground,
12 circuit
12 circuit, no cover
BSS7748
SAFETYHUB 250
FUSE BLOCK WITH BATTERY SWITCH
Combines an ignition protected fuse block with a remote battery switch
and integrated connecting plugs. It consolidates up to seven circuits
from 1A – 200A, eliminates loose wires, protects fuses from explosive
fumes, and provides main battery shutdown from a safe location. The
SafetyHub250 is ideal for vessels ranging from ski boats to offshore
fishing boats.
3 30A 200A MIDI fuses & 4 1A 20A ATO /ATC fuses
Amperage
240 Amps total max
Voltage
12V DC
BSS7727
SafetyHub 250 w/remote battery switch
manual control
ST GLASS FUSE BLOCK SYSTEM
Clear insulating cover with recesses for standard Blue Sea labels
Cover insulates all conductive parts, meets ABYC / USCG req.
Cover stores spare fuses
Beryllium copper contact clips give full 30 Ampere rating per circuit
Uses AGC Fast , MDL Time-Delay & all other 3AG Glass Fuses
Tin-plated copper buses
20 write-on labels included
Material
Reinforced polycarbonate
Dimensions 5 H x 3-1/4 W x 1-1/4 D
Amperage
30A max per circuit 100A max entire block
Voltage
32 Volts DC
BSS5015
BSS5018
Fuse Block AGC 6 circuit with ground
Fuse Block AGC 6 circuit without ground
182
Electrical
ATO/ATC FUSE PANELS
Common negative bus with push-on tabs.
Common positive feed.
ANC607122
ANC607123
MAXI FUSE
INLINE FUSE HOLDER
445299
max 60 amps
6 gang
12 gang
WATERPROOF IN-LINE
FUSE HOLDER
ATO/ATC STYLE FUSE BLOCK
1/4 spade terminals and 8-32 screws. Tin plated
copper contacts. Rated for 30 amps maximum per
circuit, 160 amp total for the block. With ground
bus bar.
G40420
G40430
G40440
6 gang
4 gang
14 gang
ATC FUSE BLOCK
WITH GROUND BLOCK
Multiple gang fuse blocks with tin plated
copper contact and ground tabs. Uses ATC
and ATO fuses. Fuses not included. Rated
30 amps maximum each circuit
12V.
445191
445193
445195
6 position, 3-3/8 x 3-3/4
10 position, 3-3/8 x 5-1/16
For use with ATO or ATC fuses
30A Max fuse. 12 AWG pigtails
BSS5065
WATERPROOF ATO/ATC
IN-LINE FUSE HOLDER
For ATO/ATC fuses. 30A max
ANC607019
IN-LINE FUSE HOLDER
For use with ATO or ATC fuses
30A Max fuse. 12 AWG pigtails
BSS5064
ATO IN-LINE FUSE HOLDER
For ATO fuses. 12 AWG wire, 30A max.
ANC607017
14 position, 3-3/8 x 6-1/4
ATO/ATC
INLINE FUSE HOLDER
Injection moulded fibreglass
reinforced nylon. 30A max.
445199
FUSE HOLDER
Stamped brass / molded bakelite. Multiple
gang fuse blocks with bronze fuse clips and
brass screws. Designed to take most AGC
& SFE type fuses. Rated for 20 amps
12
volts.
420513
3 Gang
420523
3 Gang with bus bar
G40510
4 Gang
420544
4 Gang with ground & bus bar
420516
6 Gang
420526
6 Gang with bus bar
420546
6 Gang with ground & bus bar
G40530
8 Gang
G40610
8 Gang with bus bar
420519
9 Gang
420529
9 Gang with bus bar
ATO/ATC
INLINE FUSE HOLDER
Injection molded PVC. Holds ATO
style fuses. 14 gauge wire. Max 30A
420509 Each
420509-7 Clip-Strip display 10 pcs.
ATO/ATC
IN-LINE FUSE HOLDER
For ATO/ATC fuses.
ANC607022 For 14 AWG wire / 15A max
ANC607023 For 10 AWG wire / 30A max
Electrical
CRIMPABLE
IN-LINE FUSE HOLDER
Accepts 12-18 AWG wire 30A Maximum fuse.
BSS5060
CRIMP-ON FUSE HOLDER
For AGC & MDL fuses .12-18 AWG, 30A max
ANC607012
WATERPROOF
IN-LINE FUSE HOLDER
Accepts 12-18 AWG wire 20A Maximum fuse.
BSS5062
30A WATERPROOF
IN-LINE FUSE HOLDER
WATERTIGHT INLINE FUSE HOLDER
Injection molded PVC. Features snap tight connection for use
in wet or semi-wet locations. Includes fuse.
420552
420553
420554
420555
420557
Wire size Max. amps
16 gauge 10
14 gauge 15
12 gauge 20
10 gauge 30
8 gauge
50
WATERTIGHT INLINE DUAL FUSE HOLDER
Injection molded PVC. Features snap tight connection for use in
wet or semi-wet locations. Includes glass fuse and extra fuse. Fuse
holder has a specially designed case that is molded with a second
fuse pocket.
420562
420563
420564
420565
Wire size
Max. amps
16 gauge
10 amps
14 gauge
15 amps
12 gauge
20 amps
10 gauge
30 amps
Accepts 12-18 AWG wire 30A Maximum fuse.
BSS5061
WATERPROOF
IN-LINE FUSE HOLDERS
For AGC & MDL fuses. 30A max
ANC607013 For 12-18 AWG wire
ANC607014 For 10 AWG wire
HEAVY DUTY
IN-LINE FUSE HOLDER
For use with AGC or MDL glass fuses.
30A Max fuse. Tinned copper 12 AWG pigtails.
BSS5063
WATER RESISTANT IN-LINE
FUSE HOLDER
For use with AGC or MDL glass fuses.
20A Max fuse, 32A Max voltage.
BSS5021 Fuse holder
BSS5022 Replacement cap
FUSE HOLDER WITH SCREW IN CAP
Moulded plastic holder is designed to take most AGC & SFE
type fuses. Mounts in panels up to 5/16 thick.
420503
ANC607010
420502
10 Amp, w/ spade terminal
15 Amp
10 Amp
HEAVY-DUTY
IN-LINE FUSE HOLDER
For AGC & MDL fuses. 12 AWG wire, 30A max
ANC607016
WATERPROOF FUSE HOLDER
Will withstand water exposure normally encountered
in most above deck applications salt spray, rain, hose
washdown or momentary immersion. Max amps 20.
Max volt 250AC/DC. For AGC fuses.
BSS5020
INLINE FUSE HOLDER
Injection molded nylon. Includes 20A fuse.
420500 Each
420500-7 Clip-Strip display 10 pcs.
IN-LINE FUSE HOLDERS
14 gauge wire, 8” long, 20 amp
3031-0BP
183
FUSE HOLDER WITH PUSH IN CAP
Moulded plastic holder is designed to take most AGC &
SFE type fuses. Mounts in panels up to 5/16 thick.
420501
20 Amp
184
Electrical
MIDI COMPACT FUSES
Tin-plated copper for corrosion resistance.
Clear cover offers visible indication of blown fuses
BSS5250
BSS5251
BSS5252
BSS5253
BSS5254
BSS5255
30A
40A
50A
60A
75A
80A
BSS5256
BSS5257
BSS5258
BSS5259
BSS5260
100A
125A
150A
175A
200A
TERMINAL BLOCK FUSES
High interrupt rating, provides DC main circuit protection. Clear
window-visual indication of blown condition. 58VDC max.
BSS5175
BSS5176
BSS5177
BSS5178
BSS5180
BSS5181
BSS5182
BSS5183
MAXI
30A
40A
50A
60A
75A
80A
90A
100A
BSS5184
BSS5185
BSS5186
BSS5187
BSS5188
BSS5189
BSS5190
ANL FUSES
Tin-plated connector blades for corrosion resistance
Visible indication of blown condition
Interrupt Capacity 6000 Amperes DC
Maximum Voltage 32 Volts DC
BSS5164
BSS5165
BSS5122
BSS5123
BSS5124
BSS5125
BSS5126
BSS5127
BSS5128
BSS5129
BSS5130
35 Amp
40 Amp
50 Amp
60 Amp
80 Amp
100 Amp
130 Amp
150 Amp
175 Amp
200 Amp
225 Amp
200A
225A
250A
300A
Most economical fuse for 100 to 250 Ampere circuit protection
Use with SEA fuse block system
Interrupt Capacity 2000 Amperes DC
Maximum Voltage 32 Volts DC
175 Amp
200 Amp
BSS5117
BSS5118
BSS5119
BSS5120
BSS5121
300 Amp
400 Amp
500 Amp
600 Amp
675 Amp
750 Amp
225 Amp
250 Amp
300 Amp
350 Amp
400 Amp
ATO/ATC FUSES
Fast-acting automotive style fuses. 3/4 x 13/16 19x20.6mm
ANC604005
ANC604007
ANC604010
ANC604015
ANC604020
ANC604025
ANC604030
225 Amp
250 Amp
350 Amp
Extremely fast short-circuit response
UL rated for DC applications under UL 198L
Interrupt Capacity 20,000 Amperes DC
Maximum Voltage 160 Volts DC
ANC604003
150 Amp
325 Amp
CLASS T FUSES
2-Pack
125 Amp
300 Amp
175A
FUSES
100 Amp
275 Amp
150A
BSS5138 30 Amp
BSS5139 40 Amp
BSS5140 50 Amp
BSS5141 60 Amp
BSS5142 70 Amp
BSS5143 80 Amp
BSS5101
BSS5102
BSS5103
BSS5104
BSS5105
BSS5106
BSS5107
BSS5108
250 Amp
125A
Widely used throughout the automotive industry
Extremely economical
Tin-plated connector blades for corrosion resistance
Visible indication of blown condition
Interrupt Capacity 1000 Amperes DC
Maximum Voltage 32 Volts DC
MEGA FUSES
BSS5131
BSS5132
BSS5133
BSS5134
BSS5135
BSS5136
BSS5137
BSS5161
BSS5162
BSS5163
ANC601114
5-Pack
445101
445102
445103
445104
445105
445107
445110
445115
445120
445125
445130
445140
2-Pack
BSS5235
BSS5236
BSS5237
BSS5238
BSS5239
Amps
1
2
3
4
5
7
BSS5240
BSS5241
BSS5242
BSS5243
BSS5244
BSS5245
BSS5246
7.5
10
15
20
25
30
40
5-30
445190
Assortment
3-20
Electrical
MDL SLOW-BLOW GLASS TUBE FUSES
AGC GLASS TUBE FUSES
Fast-acting, corrosion resistant fuses.1/4 x 1-1/4 6.4x32mm .
5 fuses per package.
ANC601005
ANC601010
ANC601015
ANC601020
ANC601025
ANC601030
ANC601040
ANC601050
ANC601070
ANC601075
ANC601080
ANC601100
ANC601120
ANC601150
ANC601200
ANC601250
ANC601300
ANC601112
ANC601113
444157
BSS5201
BSS5202
BSS5204
BSS5205
BSS5206
BSS5207
BSS5208
BSS5209
BSS5210
BSS5211
BSS5212
BSS5213
444110
BSS5215
444115
444120
444125
444130
444135
BSS5217
BSS5218
BSS5219
BSS5220
444150
444101
444151
444102
444152
444103
444104
444105
444106
41 mixed kit
444190
Amps
0.25
0.5
1
1.5
2
2.5
3
4
5
6
7
7.5
8
10
12
15
20
25
30
35
5-30
1-30
30 mixed kit
Time-delayed to allow temporary, harmless in-rush currents to pass but
open on sustained overloads and short-circuits..
1/4 X 1-1/4 6.4x32mm . 2 fuses per package.
ANC602030
ANC602050
ANC602062
ANC602075
444303
444308
444310
ANC602100
ANC602150
ANC602200
ANC602250
ANC602300
444335
BSS5226
BSS5227
BSS5228
BSS5229
BSS5230
BSS5231
BSS5232
BSS5233
BSS5234
SFE GLASS TUBE FUSES
Fast-acting, corrosion resistant fuses open quickly to
protect circuits from overloads and short circuits.
Size determined by amperage.
Amps Size
Qty/pkg
444204
444206
444257
444209
444214
4
1/4 x 5/8
5
6
1/4 x 3/4
5
7.5
1/4 x 7/8
5
9
1/4 x 7/8
5
14
1/4 x 1-1/16
5
GMA MINI GLASS TUBE FUSES
Fast-acting, corrosion resistant fuses. 3/16 x 13/16 5x20mm
3 fuses per package.
Amps
ANC605010
ANC605020
ANC605030
ANC605050
ANC605070
ANC605100
BSS5280
BSS5281
BSS5282
BSS5283
BSS5284
BSS5285
ATM FUSES
Fast-acting mini automotive style fuses.
5/16 x 7/16 7.9x11.11mm 2 fuses per package.
1
2
3
5
7
10
185
ANC603905
ANC603910
ANC603915
ANC603920
ANC603930
BSS5270
BSS5271
BSS5272
BSS5273
BSS5274
Amps
5
10
15
20
30
Amps
3
5
6.25
7.5
8
10
15
20
25
30
35
186
Electrical
TERMINAL BLOCKS
Stamped brass / molded bakelite strip.
Available for 10 or 20 amps.
10 Amp
20 Amp
Terminals
426604
426606
426608
426600
426624
426626
426628
426620
4
6
8
10
INDEPENDENT CONNECTORS
Each screw pair is 1 isolated circuit
Jumpers allow creation of common circuits
Closed back completely insulates power from the mounting surface
Made from Nickel-Plated Brass / Phenolic
DUALBUS COMMON BUS BARS
Combines negative and positive buses on one block.
Tin-plated copper bars.
100A AC/DC max continuous, 300V AC / 38V DC max.
BSS2701 5 x 8-32 screw terminal
BSS2702 10 x 8-32 screw terminal
BSS2709 Cover for BSS2701
BSS2710 Cover for BSS2702
COMBINATION BUS BAR
Brass Tin Plated/ABS. 100 Amps.
Fastener 10 RH.
426685
426686
10 x 8-32 terminals,
20 x 8-32 terminals,
15 AMP BLOCKS, 6-32 SCREWS
300V AC/DC Maximum, 20A AC/DC Max.
BSS2402 2 circuit
BSS2404 4 circuit
BSS2406 6 circuit
BSS2408 8 circuit
BSS2410 10 circuit
BSS9218 Jumper 2400 Series, nickel-plated brass, 5/pack
30 AMPERE BLOCKS, 8-32 SCREWS
600V AC/DC Maximum, 30A AC/DC Max.
BSS2502 2 circuit
BSS2504 4 circuit
BSS2506 6 circuit
BSS2508 8 circuit
BSS2510 10 circuit
BSS2512 12 circuit
BSS9217 Jumper 2500 Series, nickel-plated brass, 5/pack
65 AMPERE BLOCKS, 10-32 SCREWS
600V AC/DC Maximum, 65A AC/DC Max.
BSS2602 2 circuit
BSS2604 4 circuit
BSS2606 6 circuit
BSS2608 8 circuit
BSS2610 10 circuit
BSS9216 Jumper 2600 Series, nickel-plated brass, 5/pack
BUS & GROUND BAR
Black molded base with two solid brass bus bar.
G40660 2 Gang
G40680 6 Gang
DUALBUS PLUS
Combines negative and positive buses on one block. Clear snap on
Lexan lid to meet Coast Guard and ABYC insulation requirements
Continuous Amps
150 Amps DC / 130 Amps AC
Voltage Rating
48 VDC maximum / 300 VAC maximum
Bus Material
Tin-Plated Copper
Base Material
Reinforced Polycarbonate
Cover Material
Clear Polycarbonate
BSS2720
BSS2722
BSS2723
1/4 stud
1/4 stud, 5x10-32 screw terminal
5/16 stud, 5x10-32 screw terminal
PIN TERMINAL BLOCKS
Meets ABYC standards has a stainless
steel wire protector to prevent damage
from screw.
ANC553091
ANC553093
ANC553095
4 gang
8 gang
12 gang
BUS BARS
Stamped brass / molded bakelite.
Solid brass 1/4 diameter stud
terminals. Screws 8-32.
Gang Length
426671
426672
10
20
5-3/4
8-7/8
Electrical
BSS2301
BSS2715
SCREW TERMINAL
BUSBARS 100A
Brass tin plated/ABS. 100 Amps. Fastener 10 RH.
426710 5 x 8-32 terminals, 4-3/16 x 7/8
426711 10 x 8-32 terminals, 6-1/4 x 7/8
BSS2302
BSS2303
150A COMMON BUSBARS
The industry standard bus for hot distribution or negative
collection circuits
Continuous Amperage
150A DC max.
Voltage Rating
48V DC Max
Bus Material
Tin-Plated Brass
Base Material
Nylon Reinforced
SCREW TERMINAL
BUSBARS
Brass tin plated/ABS. 48VDC max
426722
426724
426733
BSS2300
BSS2301
BSS2302
BSS2312
BSS2303
BSS2307
BSS2716
BSS2715
10 x 8-32 terminals, 6 x 1-1/4 , 150A
20 x 8-32 terminals, 9-1/2 x 1-1/4 , 150A
12 x 10 terminals, 7-15/16 x 1-1/2 , 250A
10 x 8-32 Screw Terminals with cover
10 x 8-32 Screw Terminals
20 x 8-32 Screw Terminals
20 x 8-32 Screw Terminals with cover
4 x 1/4 Stud Terminals
4 x 1/4 Stud Terminals with cover
Cover for 2302
Cover for 2301 and 2303
BUS BAR STUD TERMINAL
Tin plated brass / ABS.
426718
426728
426738
426768
No. of
Terminal
Size
Amps
4x 10-24
4 3/16 x 7/8
100
10 RH
4x1/4 -20
6 x 1 1/4
150
10 RH
4x5/16 -18
8 x 1 1/2
250
10RH
4x3/8 -16
7 x2
600
1/4 RH
BSS2306
Fastener
BSS2713
BSS2305
MAXIBUS 250A COMMON BUSBARS
Continuous Amps
Voltage Rating
Bus Material
Base Material
BSS2105
BSS2106
BSS2126
BSS2127
BSS2128
BSS2718
BSS2711
250 Amperes DC/250 Amperes AC
48VDC maximum / 300VAC maximum
Tin-Plated Copper
Lexan Polycarbonate
Terminal Studs Terminal screws
2
5/16 -18
12
10-24
4 x 5/16
-
6
5/16 -18
-
4
5/16 -18
-
2
5/16 -18
6
BSS2711
10-24
Cover for 2105 and 2126
Cover for 2106
BSS2304
BSS2716
BSS2315
MINIBUS 100A COMMON BUS
Great for limited space applications in electronics
cabinets and under dashboards
Continuous Amps
100 Amperes AC/DC
Voltage Rating
48VDC max / 300VAC max
Bus Material
Tin-Plated Copper
Base Material
ABS
BSS2304
BSS2305
BSS2306
BSS2713
BSS2314
BSS2315
5 x 8-32 Screw Terminals
4 x 10-24 Stud Terminals
6 x 8-32 Stud Term. 100A DC Grounding Busbar
Cover For MiniBus 2304 and 2305
5 x 8-32 Screw Terminals with cover
4 x 10-24 Stud Terminals with cover
POWERBAR 600A COMMON BUSBARS
Continuous Amps
Voltage Rating
Bus Material
Base Material
BSS2104
BSS2107
BSS2708
600 Amperes DC/545 Amperes AC
48VDC maximum / 300VAC maximum
Tin-Plated CDA110 Copper
GE Lexan Polycarbonate
Four 3/8 studs and four 8-32 screws
8 x 3/8-16 stud terminal and four 8-32 screws
Cover Connector Power Bar
187
188
Electrical
DUAL POWERPOST
CABLE CONNECTORS
2016/2017 are designed for connecting
high amp conductors
2018 is designed for outboard engine installation
when factory cables need to be extended
Includes one black and one red insulator
Max voltage 48VDC
BSS2016
BSS2017
BSS2018
DIRECT CONNECT
Terminate up to four electronic instruments on each set of terminals
Comes complete with quick-connect terminals
Positive molded in red, negative molded in black
All one piece, no screws or parts to lose
Cover snaps tight when closed
2 x 3/8” terminal studs
1 x 5/16”, 1 x 3/8” terminal studs
12VTR
POWERBAR
COMMON BUSBAR
Continuous Rating
Voltage Rating
Bus Material
Terminal size
TERMINAL FEED THROUGH
STUD CONNECTORS
600 Amps
48 Volts DC
Tin-Plated Copper
2 x 3/8” Terminal studs
BSS2019
Perfect for passing high current through hulls, decks and bulkheads.
Large cables passed through holes are subject to chafing even when
protective grommeting is used. The large terminals have a mounting
face that can be gasketed or bedded to provide a water tight
installation.Reinforced thermoplastic. Tin-plated copper alloy studs.
48 Volts DC max.
POWERPOST
HIGH AMERAGE CABLE CONNECTORS
Connects high amperage cables securely.
Continuous Amps
Not rated - Amperage flows between terminals
stacked on post and is determined by wire and terminals used
Voltage Rating
48 Volts DC Maximum
Base Material
Reinforced Thermoplastic
BSS2010
BSS2001
BSS2002
BSS2003
BSS2011
10-32 x 5/8 stud
1/4 x 1-1/16 Stud
5/16 x 7/8 Stud
Size
Amps
Colour
5/16 -18 stud
Small
250A
Black
5/16 -18 stud
Small
250A
Red
3/8 -16 stud
Small
250A
Black
3/8 -16 stud
Small
250A
Red
3/8 -16 stud
Large
400A
Black
3/8 -16 stud
Large
400A
Red
1/2 -13 stud
Large
400A
Black
1/2 -13 stud
Large
400A
Red
3/8 x 7/8 Stud
1/4 x 3/4 Stud
POWERPOST PLUS
CABLE CONNECTOR
CABLECAP STUD INSULATORS
150 Ampere bus allows small wire connections at
high amperage cable connections
Continuous Amps 150 amp DC/AC
Voltage Rating
48 Volts DC Maximum
Bus Material
Tin-Plated Copper
Base Material
Glass-Reinforced Nylon
BSS2101
BSS2102
BSS2103
Insulate stud type connectors on alternators, starters,
windlasses and other high amperage devices. PVC
BSS4008
BSS4009
BSS4010
BSS4011
BSS4012
BSS4013
BSS4014
BSS4015
1/4 stud with 8 8-32 screws
5/16 stud with 8 8-32 screws
3/8 stud with 8 8-32 screws
TERMINAL POST
Nylon/Stainless. Includes cover to meet ABYC/USCG Requirements.
Max Amperage 150A / Max. Voltage 48VDC.
426808
426810
BSS2201
BSS2202
BSS2203
BSS2204
BSS2205
BSS2206
BSS2207
BSS2208
A
B
C
D
E
F
3-3/4” 1-11/16” 1-1/4” 1-5/16” 2-3/16” 5/16-18
3-3/4” 1-11/16” 1-1/4” 1-5/16” 2-3/16” 3/8-16
Cable Size
Colour
Quantity
18-10
Red
3 per pack
18-10
Black
3 per pack
8-4
Red
2 per pack
8-4
Black
2 per pack
2-2/0
Red
1 per pack
2-2/0
Black
1 per pack
3/0-4/0
Red
1 per pack
3/0-4/0
Black
1 per pack
STANDARD CABLECAPS
For batteries with marine adaptor terminals added on
Packaged as a pair, one each black and red
PVC
BSS4005
BSS4006
4, 2, 1 cable sizes
1/0, 2/0 cable sizes
Electrical
Round
ROTATING CABLECAPS
Top rotates 360 to allow cable entry from any angle
For batteries with integral marine wing nut posts
Packaged as a pair, one each black and red
PVC
BSS4001 All cables sizes
AUTOMOTIVE CABLECAPS
BSS4016
BSS4017
4, 2, 1 cable sizes
1/0, 2/0 cable sizes
Made of nylon 6/6 flame resistant, self extinguishing Buna-N form
seal
Resistant to salt water, acids, alkalis, alcohol, oils
Non-corrosive for use in the marine environment
All seals exceed NEMA 4 x or 6 specs
Provides watertight cable entries into panels and junction boxes
UL and CSA listed
Good underwater to 300 feet
AWG range
Thread
Cable type
18-10 AWG
20-1 AWG
1-3/0 AWG
4-1 AWG,
10/2, 12/2, 14/2,
12/3, 14/3,16/3
3/8”NPT
1/2”NPT
3/4”NPT
1/2 NPT
Round
Round
Round
Round / Flat
GROMMETS
BATTERY TERMINAL COVERS
Provide instant abrasion resistance to wires passing through panels
Flexible black vinyl makes installation simple
Size
I.D.
Width Qty/pkg
Injection molded PVC
415100
415105
Flat
LIQUID TIGHT WIRE SEALS
ANC764998
ANC765000
ANC765004
ANC765002
Designed to fit standard automotive posts
Packaged as a pair, one each black and red
PVC
189
ANC760375
ANC760500
ANC750000
1/2 cable entry
5/8 cable entry
3/8”
1/4”
3/32”
1/2”
3/8”
1/16”
1/4 -3/4” Astd. Combo Pack
5
5
45
C
B
ANC260350
ANC260392
A
BATTERY TERMINAL BOOTS
ANC260350
ANC260392
Wing nut style
Wire size Colour
4&2
black/red
Rotating cap
4&2
black/red
WATERTIGHT CABLE OUTLET
Machined brass chrome plated.
A
B
426040
1 1/4
1/4 Cable
426042
1 1/4
5/16 Cable
426051
1 1/2
3/8 Cable
C
5/8
5/8
11/16
CABLECLAMS
Waterproof co-axial installation with no need to remove connectors
Save the expense of removing and replacing connectors
Avoid poor connections from removing factory connectors
Body Material Acetal
Seal Material
UV-Stabilized Buna-N Rubber
Screws
Stainless Steel
BSS1001
BSS1002
BSS1003
.625 opening, 1.7 od
.834 opening, 1.98 od
1.396 opening, 2.49 od
DRY SEAL CONNECTORS
Seals intact under harsh conditions. Resistant to chemical exposure.
One piece, moulded body. Polarized against mismatches.
14 AWG Rated to 400 v AC, 15 Amps.
ANC249003
ANC249007
Cable Colour
Description
14/2
Red/yellow Two conductors
14/2
Red/yellow Two conductors w mounting plate
190
Electrical
B
D
C
A
CUTOUT
SIZE
5 TOGGLE SWITCH PANEL
QUICK CONNEX KITS & CONNECTORS
50 Amp housing, for use to 600 volts continuous AC or DC operation.
Silver plated contacts ensure greater corrosion resistance. Kits include
4 connectors in 6 or 8 AWG and black, red, and yellow heatshrink
tubing to complete any installation. Can be permanently affixed or easily
disconnected for changing needs. Packs include 2 connectors and
black, red, and yellow heatshrink tubing.
ANC248008
Nylon. Toggle switch panel includes 5 switches rated
at 15A 12VDC. Includes 12VDC power socket.
Water resistant.
A
B
C
D
424605
3-3/4
4-1/4
3-3/8
3-3/8
With 4 x 8 AWG connectors
B
D
C
A
CUTOUT
SIZE
6 TOGGLE SWITCH PANEL
Nylon. Toggle switch panel includes 3 switches
rated at 15A 12VDC. Water resistant.
A
B
C
D
424606
3-3/4
4-1/4
3-3/8
3-3/8
CONTOUR GEN 2 SWITCH PANELS
Backlit labels
Red systems ON LED’s
Gaskets and seals ensure watertight operation
Hidden mounting screws
Joiner available for linking multiple panels
BEPCG2-2W-F
BEPCG2-4W-F
BEPCG2-6W-F
2 Switch
Label set supplied
6 Switch
B
BEP900-4WP
BEP900-5WPS
BEP900-6WP
Nylon. Toggle switch panel includes 4 switches rated at
15A 12VDC. Water resistant.
A
B
C
D
3-3/4
6 Switches
CUTOUT
SIZE
4 TOGGLE SWITCH PANEL
424604
2 Switches
5 Switches with power socket
D
C
A
SPRAY PROOF SWITCH PANEL
4 Switch
4-1/4
3-3/8
3-3/8
WEATHER RESISTANT
ROCKER SWITCH
Weather resistant and rated for 25 amps at 12 volts. Supplied
with snap in lenses amber, clear, green and red . Brass blade
terminals. Snap in panel mount. Panel thickness .964 to .187.
Mounting dimensions 1.45 L x .83 W.
58328-100BP
Electrical
191
LARGE
ILLUMINATING
ROCKER SWITCH
Stamped brass/injection molded
nylon polycarbonate.
Rated 15 Amp, 12VDC. 7/8 x 1-7/16 .
Lens
420251
420252
420253
420254
420258
420259
Circuit
Action
Colour
SPST
On/Off
Red
SPST
Mom. On/Off
Red
DPDT
On/Off/On
Red/Yellow
DPDT
Mom. On/Off/Mom. On
Red/Yellow
SPDT
Mom. On/Off/On
Red/Yellow
SPDT
On/Off/On
Red/Yellow
LARGE ROCKER SWITCH
Stamped brass/injection molded nylon
polycarbonate. Rated 15 Amps, 12VDC.
7/8 x 1-7/16 .
420241
420242
420245
420248
420249
Circuit Action
SPST
On/Off
SPST
Mom. On/Off
SPDT
Mom. On/Off/On
SPDT
On/Off/On
SPDT
Mom. On/Off/Mom. On
SMALL ROCKER SWITCH
Stamped brass/injection molded nylon & polycarbonate.
1/2 x 1-1/8 .
420441
420443
420446
Amps Volts Circuit Action
15
12
SPST
On/Off illuminated
15
12
SPDT
On/Off/On non illuminated
15
12
SPST
On/Off illuminated
WATERPROOF CONTURA SWITCHES
Vibration, shock, thermoshock, moisture and salt spray resistant. Specially
manufactured for mounting in Blue Sea Systems water resistant panels.
Ignition Protected - Safe for installation aboard gasoline powered boats. Meets
UL1500 and ISO8846 ignition protection requirements.
7/8 x 1-7/16 , Rated 20A
12VDC
Grey
Black
Circuit Action
Illuminated
BSS8230
BSS8231
BSS8232
BSS8233
BSS8234
BSS8218
BSS8219
BSS8220
BSS8221
BSS8222
BSS8275
BSS8282
BSS8292
BSS8283
BSS8284
BSS8285
BSS8287
BSS8288
BSS8286
BSS8289
BSS8290
SPST
SPST
SPDT
SPDT
SPDT
DPST
DPST
DPDT
DPDT
DPDT
DPDT
OFF-ON
OFF- ON
ON-OFF-ON
ON -OFF-OFF
ON -OFF- ON
OFF-ON
OFF- ON
ON-OFF-ON
ON -OFF-ON
ON -OFF- ON
ON-ON
Yes
No
Yes
Yes
No
Yes
No
Yes
Yes
No
Yes
ILLUMINATING CONTURA SWITCHES
Stamped brass/injection molded nylon & polycarbonate.
Rated 20 Amp, 12VDC.
A 13/16
B 1-7/16
420211
420212
420213
420214
420218
420219
Circuit Action
SPST
On/Off
SPST
Mom. On/Off
SPDT
On/Off/On
SPDT
Mom. On/Off/Mom. On
DPDT
On/Off/On
DPDT
Mom. On/Off/Mom. On
CONTURA SWITCH
Stamped brass/injection molded nylon & polycarbonate.
Rated 20 Amps, 12VDC. A 13/16 B 1-7/16
420201
420202
420203
420204
420208
420209
Circuit Action
SPST
On/Off
SPST
Mom. On/Off
SPDT
On/Off/On
SPDT
Mom. On/Off/Mom. On
DPDT
On/Off/On
DPDT
Mom. On/Off/Mom. On
CONTURA SWITCH
MOUNTING PANELS
Modular design permits easy assembly in groups of
varying sizes. Mounting panels available in 1, 3 and 6 fixed
position models. Designed for mounting in 6 different panel
thicknesses
BSS8267
BSS8266
BSS8268
BSS8259
BSS8260
BSS8278
End mounting panel
Centre mounting panel
1 position mounting panel
3 position mounting panel
6 position mounting panel
Mounting panel plug
ROCKER SWITCH MOUNTING BRACKET
Injection molded nylon. For Standard and Contura switches.
420290
420291
420292
Desc.
A
B
Cover
1-15/16
15/16
Centre
2-5/16
1-1/16
End
2-5/16
1-1/4
C
D
E
1-7/16
7/16
1-1/16
1-7/16
13/16
1-1/16
192
Electrical
WEATHERDECK
TOGGLE SWITCHES
Specially manufactured by Carling Technologies
Nickel-plated brass and phenolic non-corrosive construction
0.25 quick connect terminals.
Rated 15Amps
12VDC / 15Amps
125VAC
BSS4150
BSS4151
BSS4152
BSS4153
BSS4154
BSS4155
BSS4138
Circuit
Action
SPST
Off - On
SPST
Off - On
SPDT
On - Off - On
SPDT
On - Off - On
SPDT
On - Off - On
DPDT
On - Off - On
Black toggle switch waterproof boot
TOGGLE SWITCH
Stamped brass/molded Bakelite.
Water resistant. 12V, 15A
420101
420102
420103
420104
420105
420108
420109
420479
Circuit
Action
A
B
SPST
On/Off
3/8
1/2
SPST
Mom. On/Off
3/8
1/2
DPDT
On/Off/On
3/8
1/2
DPDT
Mom. On/Off/Mom. On
3/8
1/2
SPDT
Mom. On/Off/On
3/8
1/2
SPDT
On/Off/On
3/8
1/2
SPDT
Mom. On/Off/Mom. On
3/8
1/2
Waterproof Cap
%QNG*GTUGG%Q
%QNG*GTUGG%Q
HEAVY DUTY
TOGGLE SWITCHES
25 amps, 1/4” panel thickness
5582BP
55014BP
5520BP
5586BP
55021BP
81255BP
SPST On/Off, 2 screw terminals
SPST On/Off, 2 blade terminals
SPST On/Off, 2 screw terminals
SPDT On/Off, 3 screw terminals
SPDT Mom. On/Off/Mom. On, 3 screw terminals
Waterproof cap black
NYLON TOGGLE SWITCHES
Paddle w/ 1/4” tab, 1 per package.
Description
ANC556010 Single pole single throw
ANC556022 Single pole single throw
ANC556025 Single pole double throw
ANC556028 Single pole double throw
Function
on-off
on -off
on -off-on
on -off- on
%QNG*GTUGG%Q
%QNG*GTUGG%Q
TOGGLE SWITCH
10 amps at 12 VDC
%QNG*GTUGG%Q
%QNG*GTUGG%Q
M484BP
WEATHER RESISTANT
TOGGLE SWITCHES
25 amps at 12 VDC, screw terminals
54100BP
54103BP
54109BP
81264BP
A
B
SPST On/Off
SPDT On/Off
SPST On/Off with illuminated toggles
Weatherproof toggle boot
TOGGLE SWITCH
Stamped brass
420465
420479
Amps A
B
Circuit Action
15
3/8
SPST
3/8
On/Off
Waterproof Cap
ILLUMINATING TOGGLE SWITCH
Stamped brass/molded Bakelite. 12VDC, 15A
LONG TOGGLE SWITCH
Stamped brass/molded Bakelite.
420460
A
B
Circuit
Action
7/16
7/16
SPST
On/Off
420111
420112
420115
420118
420119
Circuit
Action
A
SPST
On/Off
3/8
B
1/2
SPST
Mom. On/Off
3/8
1/2
SPDT
Mom. On/Off/On
3/8
1/2
SPDT
On/Off/On
3/8
1/2
SPDT
Mom. On/Off/Mom. On
3/8
1/2
Electrical
PUSH BUTTON SWITCH WITH CAP
Polypropylene. Fits up to 1-1/8 panel. 5/8 stem
diameter. 15 amps. Mom. On/Off.
420427
LIGHT TIP TOGGLE SWITCH
Stamped brass/molded Bakelite. 12VDC, 15A
420121
420122
420123
420124
420125
420128
420129
Circuit
Action
A
B
SPST
On/Off
3/8
1/2
SPST
Mom. On/Off
3/8
1/2
SPDT
On/Off/On
3/8
1/2
SPDT
Mom. On/Off/Mom. On
3/8
1/2
SPDT
Mom. On/Off/On
3/8
1/2
DPDT
On/Off/On
3/8
1/2
DPDT
Mom. On/Off/Mom. On
3/8
1/2
MOMENTARY
PUSH BUTTON SWITCH
Stamped brass, fits up to 1 panel, 5/8
stem diameter
Amps Cap colour
420420
420421
420422
420424
420425
15
No cap
15
Black
15
Red
cap
Black
cap
Red
PANEL SWITCH
For applications such as starters, bilge pumps, horns, wipers and
engine controls where switching, separate from circuit protection, is
required
All panel switches mount in Blue Sea Systems toggle
type circuit breaker panels
Supplied with mounting adapter for standard 5/8”
circuit breaker mounting hole
Nickel-plated brass and phenolic non-corrosive
construction
Rating 15Amps
12VDC / 15Amps
125VAC
Type
Circuit
Action
BSS8200
push button
SPST
OFF- ON
BSS8204
toggle
SPST
OFF-ON
BSS8205
toggle
SPST
OFF- ON
BSS8206
toggle
SPDT
ON-OFF-ON
BSS8207
toggle
SPDT
ON -OFF-ON
BSS8208
toggle
SPDT
ON -OFF- ON
BSS8209
toggle
SPDT
OFF-ON- ON
BSS8210
toggle
DPST
OFF-ON
BSS8211
toggle
DPDT
ON-OFF-ON
BSS8212
toggle
DPDT
ON -OFF-ON
Progressive Two Circuit Switch
maintains circuit one while
momentarily selecting circuit two.
%QNG*GTUGG%Q
%QNG*GTUGG%Q
HEAVY DUTY
MOMENTARY PUSH BUTTON SWITCHES
Brass stem, 5/8”, fits panels 1” thick. 15Amp rating.
M490BP
M626BP
M612BP
M485BP
With rubber cap
With recessed plunger
Fits panels 3/4” thick
%QNG*GTUGG%Q
%QNG*GTUGG%Q
WEATHERPROOF CAPS
Fit switches with 5/8”-32 thread mounting stem
83280-02 Red cap
83280-03 Black cap
SPLASH GARDE HORN SWITCH
PVC coating protects terminals and switch from water.
Not designed for immersion. 15 amps. 13/16 x 5/8 .
420426
HORN BUTTON
%QNG*GTUGG%Q
%QNG*GTUGG%Q
Nylon/phenolic and chrome plated brass
420415
420416
Amps
Colour
A
B
15
Red
5/16
1/2
15
Black
5/16
1/2
PLASTICIZED
MOMENTARY SWITCH
10 amps. Two 12” long 18 gauge
wire leads, brass stem.
M608BP
%QNG*GTUGG%Q
%QNG*GTUGG%Q
HEAVY-DUTY
PUSH BUTTON SWITCH
HORN BUTTON
Brass chrome plated
420429
A
B
C
D
2-9/16
7/8
2-1/8
1-5/8
35Amp, 12VDC with brown rubber cap.
For panels up to 1/4 , 5/8 Dia. mounting hole.
90030BP
193
194
Electrical
TWO POSITION
ON-OFF PUSH-PULL SWITCH
Stamped brass
420390
A
B
Amps
1
3/8
15
%QNG*GTUGG%Q
%QNG*GTUGG%Q
HEAVY DUTY
TWO CIRCUIT, SPDT,
ON-ON PUSH-PULL SWITCH
10 amps at 12 volts. 1” panel thickness.
M630BP
%QNG*GTUGG%Q
%QNG*GTUGG%Q
SPLASH GARDE
ON-OFF PUSH-PULL SWITCH
PVC coating protects terminals and switch from
water. Not designed for immersion.
15 amps. 7/8 x 3/8 .
HEAVY DUTY
TWO CIRCUIT, SINGLE POLE,
OFF-ON1-ON 2 PUSH-PULL SWITCH
10 amps at 12 volts. 1” panel thickness.
M531BP
420396
%QNG*GTUGG%Q
%QNG*GTUGG%Q
THREE POSITION ONE CIRCUIT
PUSH-PULL SWITCH
HEAVY DUTY
TWO CIRCUIT,
SPST, OFF-ON PUSH-PULL SWITCH
10 amps at 12 volts. 1” panel thickness.
M527BP
Stamped brass
420410
A
B
Amps
1
3/8
15
THREE POSITION TWO CIRCUIT
PUSH-PULL SWITCH
THREE POSITION IGNITION SWITCH
Polypropylene. 13/16 mounting hole
Stamped brass
420400
A
B
Amps
1
3/8
15
420360
420361
420365
420366
Action
Panel
Terminal
Cap
Off-Ignition-Start
1-1/8
Screw-3
No
Off-Ignition-Start
5/8
Screw-3
No
Off-Ignition-Start
1-1/8
Screw-3
Yes
Off-Ignition-Start
5/8
Screw-3
Yes
%QNG*GTUGG%Q
%QNG*GTUGG%Q
HEAVY DUTY PLASTICIZED
PUSH-PULL SWITCH
One circuit, SPST, 10 amps at 12 volts. 5/8”
panel thickness.
M606BP
%QNG*GTUGG%Q
%QNG*GTUGG%Q
HEAVY DUTY SWITCH
One circuit, SPST, 10 amps at 12 VDC.
3/4” panel thickness.
M482BP
THREE POSITION IGNITION SWITCH
MAGNETO STYLE
Polypropylene. Off-Ignition-Start, 6-screw terminals.
Mounting hole 13/16 . Max. panel 1-1/8 . No cap.
420369
%QNG*GTUGG%Q
%QNG*GTUGG%Q
THREE POSITION IGNITION SWITCH
6-36VDC. Three nickel-silver screw terminals. Durable plastic
case and stem with PVC boot for added weather protection.
Mounting stem fits panels up to 7/8 thick with 7/8 Dia. hole.
M850BP
Electrical
THREE POSITION IGNITION SWITCH
MAGNETO STYLE
Polypropylene. Push to choke. Mounting hole 13/16 .
Max panel 5/8 .
420381
420382
420383
Action
Terminal Cap
Off-Ign.-Start-Choke
Screw-6
Off-Ign.-Start-Choke
Boss-6
No
Off-Ign.-Start-Choke
Wire-6
No
FOUR POSITION IGNITION SWITCH
Brass. Acc.-Off-Ignition-Start. 13/16 mounting hole.
1-1/8 max panel. 4-Screw terminal, no cap.
420356
No
KILL SWITCH
UNIVERSAL WITH LANYARD
Stamped brass/injection molded nylon and Delrin.
Dual circuitry allows kill switch to be wired for either ignition kill
or magneto kill depending on the application.
FOUR POSITION IGNITION SWITCH
420498
420499
Switch with lanyard
Lanyard only
Polypropylene. Mounting hole 13/16 . Max. panel 1-1/8 .
420375
420379
Action
Terminal
Cap
Acc.-Off-Ignition-Start
Screw-4
Yes
Acc.-Off-Ignition-Start
Blade-4
No
SAFETY TETHER
KILL SWITCHES
Stamped brass/injection
molded nylon and Delrin.
420486
420487
FOUR POSITION IGNITION SWITCH
MAGNETO STYLE
Polypropylene. Mounting hole 13/16 . Max. panel 5/8 .
Action
Terminal
Cap
420385
420386
Acc.-Off-Ign.-Start-Choke
Screw-7
No
Acc.-Off-Ign.-Start-Choke
Boss-7
No
Magneto, normally open circuit
Ignition, normally closed circuit
UNIVERSAL
KILL SWITCH
Stamped brass/injection molded nylon and
Delrin. Dual circuitry allows kill switch to be wired
for either ignition kill or magneto kill depending
on the application.
420488
420489
Universal kill style
Lanyard only
KILL SWITCH 7 KEY
UNIVERSAL LANYARD
THREE POSITION IGNITION SWITCH
Brass. 13/16 mounting hole.
420350
420355
Action
Panel
Terminal
Cap
Off-Ignition-Start
1-1/8
Screw-3
No
Off-Ignition-Start
1-1/8
Screw-3
Yes
7 Key Lanyard fits Johnson, Evinrude,
Mercury, Yamaha, Honda, Tohatsu,
Suzuki and Nissan kill switches.
420495
KILL SWITCH KEYS
WITH LANYARD
This lanyard has 7 keys to fit all Johnson,
Evinrude, Mercury, Yamaha, Suzuki,
Honda and Nissan/Tohatsu kill switches.
THREE POSITION IGNITION SWITCH
MAGNETO STYLE
Brass. Off-Ignition-Start. 13/16 mounting hole.
1-1/8 max panel. 5-screw terminal, no cap.
420351
%QNG*GTUGG%Q
%QNG*GTUGG%Q
THREE POSITION IGNITION SWITCH
Off, ignition and start. Three brass screw terminals. Brass mounting
stem, 13/16”, 1-7/32” long, fits panels up through 1” thick.
M550BP
KWIBKS-6
KILL SWITCH KEYS
WITH LANYARD
4 keys to fit Sea Doo, Yamaha, Kawasaki,
Honda, Polaris, Tiger Shark and Wet Jet.
Stainless key ring, swivel snap, floating
detachable wrist band, floating vest
lanyard & pea-less whistle.
KWIUL-1
KWIUL-2
KWIUL-3
Purple/Yellow
Red/Black
Blue/Silver
195
196
Electrical
BATTERY SWITCHES
Tin-plated copper studs for maximum conductivity and corrosion resistance
7/8 stud length accepts multiple cable terminals
Blue Sea Systems one-piece terminal stud design never loosens over time
Case design allows surface or rear panel mounting options
Fits most Perko and Guest low amperage battery switch hole patterns
Label with international legends
Tactile indicator conveys knob position by feel
Models with AFD Alternator Field Disconnect AFD protects the diodes
in the alternator in the event of the switch being switched to the OFF position
while the engine is running.
DUAL CIRCUIT
APPLICATIONS
1. Switches both positive and negative lines simultaneously
with one simple ON/OFF switch to meet European and metal
boat requirements for a double pole switch.
2. Switches circuits of different voltages, such as 12 Volt and
24 Volt, simultaneously with one simple ON/OFF switch.
DUAL CIRCUIT PLUS
APPLICATIONS
1. Switches two battery banks simultaneously with one simple
ON/OFF switch while maintaining battery bank isolation,
minimizing the risk of a dead start battery.
2. The COMBINE BATTERIES function offers the ability to
combine two battery banks in the event of a low battery.
E-SERIES BATTERY SWITCHES
Cranking Rating
Continuous Rating
Voltage Rating
Terminal Stud
9001e, 9004e
2000A DC
350A DC
48 VDC Max
3/8
5510e, 5511e
1000A DC
350A DC
32 VDC Max
3/8
BSS9001E
BSS9002E
BSS9003E
BSS9004E
BSS9001E200
BSS5510E
4 Position selector
BSS5511E
Dual Circuit Plus
see top of page for applications
BSS5511E200
4 Position selector with ADF
ON/OFF selector
ON/OFF selector with AFD
4 Position selector Black
Dual Circuit
see top of page for applications
Dual Circuit Plus
Black
see top of page for applications
M-SERIES MINI BATTERY SWITCHES
Isolating cover with three snap-in side pieces protects rear contacts
and allows wire access in any direction.
6005-6007
6010-6011
Cranking Rating
1500A DC
1000A DC
Continuous Duty Rating
300A DC
300A DC
Terminal Stud
3/8
3/8
Cable Size to Meet Ratings
4/0
4/0
Voltage Rating
48 VDC Max.
32VDC Max.
BSS6005
BSS6006
BSS6007
BSS6007200
BSS6011
BSS6011200
BSS7900
BSS6010
BSS6011
Single circuit ON/OFF removable key
Single circuit ON/OFF removable knob
4 position selector
4 position selector Black
Dual circuit ON/OFF
Dual circuit ON/OFF Black
Spare key for 6005
Dual Circuit
see top of page for applications
Dual Circuit Plus
see top of page for applications
HEAVY DUTY BATTERY SWITCHES
Up to 600 Ampere Continuous Rating for large diesel engines.
48 Volts DC max.Cable clearance for 4/0 cables 1.10 .
3000-3001
3002-3003
Continuous rating
600A DC
500A DC
Voltage Rating
48 VDC Max
48 VDC Max
Terminal Stud
1/2
1/2
BSS3000
BSS3001
BSS3002
BSS3003
BSS11003
Single circuit On/Off
Single circuit On/Off, with AFD
4 position Selector
4 position Selector, with AFD
3 position Selector, with AFD
Electrical
197
MINI BATTERY SELECTOR SWITCH
The most compact selector switch available on the market. Removable
side plates and back cover.
Continuous Rating
200 Amps DC
Cranking Rating
1000 Amps DC
Voltage Rating
48 Volts DC
Operation
1 - 2 - Both - Off
Dimensions
2.75 x 2.75 x 3 H
BEP701S
BATTERY SELECTOR SWITCHES
EASYFIT BATTERY SWITCH
Threaded collar allows the switch to be
mounted through various thicknesses of
panel. Removable key. Labelled handle for
clear identification of switch. Removable rear
cover conceals exposed terminals in order to
comply with ABYC.
Continuous Rating
275 Amps DC
Cranking Rating
1250 Amps DC
Voltage Rating
48 Volts DC
Operation
On/Off
Ignition protected
Surface mount
For use with systems under 50 volts
For use with 2 batteries and single, or dual engine systems
two switches required .
5-1/4 Diameter x 2-5/8 Deep
250 amps continuous, 360 amps intermittent rating.
8501-DP
8502-DP
8503-DP
8504-DP
Standard
with Keylock
Standard with alternator field disconnect
with Keylock and alternator field disconnect
BEP700
CONTOUR BATTERY
ON/OFF MASTER SWITCH
Contour lock system, allows it to be a stand
alone unit, or locked together with other switches.
The 701 also features a control knob which can
be removed by switching to an anti-clockwise
45 position. Tin plated copper studs and nuts.
Supplied with a removable rear cover. Can be
either surface or recess mounted by cutting a
2 1/16” 52mm hole.
Continuous Rating
275 Amps DC
Cranking Rating
1250 Amps DC
Voltage rating
48 Volts DC
Dimensions
2.75 x 2.75 x 3 H
BEP701
CONTOUR HEAVY DUTY ON/
OFF BATTERY SWITCH
Switch can be locked using 6mm padlock with
75mm reach.
Continuous Rating
600 Amps DC
Cranking Rating
2500 Amps DC
Voltage Rating
48 Volts DC
Mounting
Recessed or Surface
Dimensions
4 x 4 x 3.5 H
MAIN BATTERY SWITCH
These units are the same basic design and construction as
Perko s 8500 series, except they are offered as main disconnect
switches. For use with systems under 50 volts.
5-1/4 Dia. x 2-5/8 Deep
250 amps continuous, 360 amps intermittent rating.
9601-DP
9602-DP
9603-DP
Standard
w/ Keylock
w/ Alternator Field Disconnect
BEP720
COMPACT BATTERY SELECTOR & MAIN
DISCONNECT SWITCHES
HEAVY DUTY
BATTERY SELECTOR SWITCH
8511-DP
8512-DP
9611-DP
8603-DP
Popular 90 easy to identify position rotation
Conductivity equal to or greater than popular 8500
series switches
Same bolt patterns as 8500 series
350Amp continuous, 450Amp intermittent rating
4 position selector
4 position selector with lock
On/Off selector
Capacity 380 amps continuous, 850 amps intermittent
5 minutes on/5 minutes off
For use with two or more batteries and single or dual engines
Alternator field disconnect to prevent damage to alternator if
accidentally switched to the OFF position while engine is running
1/2 inch diameter brass battery terminals
For use with systems under 50 Volts
5-1/4 H x 5-1/4 W x 3-3/8 D
198
Electrical
HEAVY DUTY
BATTERY DISCONNECT
SWITCH
Capacity 450 amps continuous
For use with systems under 50 volts
1200 Amps intermittent 15 seconds on, 5 minutes off
9703-DP
BATTERY SWITCH
Seawater resistant, water and dust-proof
according to IPX 4 DIN 40050 .
Housing
Black, plastic
Key
Red, plastic
Max. Load
1000 A at 12 V 10 sec.
500 A at 24 V 10 sec.
87181
87185
Spare key
%QNG*GTUGG%Q
%QNG*GTUGG%Q
DUAL BATTERY
SELECTOR AND MASTER
DISCONNECT SWITCHES
310 amps continuous, 500 amps intermittent
M750BP
HEAVY DUTY BATTERY SWITCH
For high loads, water and dust-proof according to IPX 2 DIN 40050 .
Housing
Black, plastic
Mounting key
and plate
Steel
Max. Load
5000 A at 12 V 10 sec.
2500 A at 24 V 10 sec.
001559001
EXTRA HEAVY DUTY
ON / OFF SWITCH
Extra heavy duty version of the 2303A designed for maximum service.
Rating 600 amps continuous, 1000 amps momentary starting with field
disconnect. 5-1/2 square.
2304A
%QNG*GTUGG%Q
%QNG*GTUGG%Q
MASTER DISCONNECT
SWITCHES
175 amps continuous, 800 amps intermittent,
15 seconds on, 5 minutes off
Mounting stem brass, 3/4” Dia.
3/8” copper studs with silver laminated contacts
M284BP
5/16” max panel thickness
BATTERY SWITCH WITH KNOB
Injection molded nylon/machined brass. Off/1/Both/2
positions. 300 amps.
422760
TWIN ENGINES, TWO BATTERY BANKS
BATTERY BANK CLUSTER
BATTERY SWITCH
Machined brass/molded bakelite. Not UL listed.
5 x 1-7/8 , 210 Amps
422750
The 715-S is designed for systems with twin engines and 2 banks
of batteries. The house loads can be switched between port and
starboard battery. The selector switch can also be used to parallel the
batteries when in both positions.
Dimensions
8.2 L x 2.7 W x 3 H
BEP715-S
Electrical
199
DUAL BATTERY MAIN DISTRIBUTION PANELS
Each panel can be mounted in four different configurations
Isolates the Start circuit from the House circuit
Simplifies battery switch operation
Protects electronics from sags and spikes caused by engine cranking
Discharges batteries independently
Addition of an Automatic Charging Relay automates charging both batteries
Allows emergency cross connect between separate engine battery banks
Provides main DC circuit protection in addition to high ampere loads
Provides 24 hour circuit protection
Includes 4218 - set of 30 common DC labels
12-24 Volts DC
House circuit protection 100 amperes DC
8686
8687
8690
8691
Inrush rating
1200A DC
1500A DC
1500A DC
1750A DC
Cranking rating
500A DC
700A DC
600A DC
900A DC
Intermittent rating
300A DC
500A DC
450A DC
600A DC
Continuous rating
200A DC
300A DC
300A DC
350A DC
BSS8686
BSS8687
BSS8690
BSS8691
M-Series, dual circuit plus
M-Series, selector
E-Series, dual circuit plus
E-Series, selector
TRIPLE BATTERY
DISTRIBUTION PANELS
Simplifies battery switch operation
Discharges batteries independently
Designed for twin engine configurations
Isolates the Start circuit from the House circuit
Protects electronics from sags and spikes caused by engine cranking
Allows emergency cross connect between separate battery banks
Includes 4218 - set of 30 common DC labels
Cranking rating
500A DC
Continuous rating
200A DC
House circuit protection
100A DC
BSS8689
BSS8693
Triple-Battery M-Series, Dual Circuit Plus
Triple-Battery E-Series, Dual Circuit Plus
PARALLEL CIRCUIT
MINI BATTERY SWITCH PLUS MAIN PANEL
Ignition protected
Isolates the Start circuit from the House circuit
Protects electronics from sags and spikes caused by engine cranking
Discharges batteries independently
Provides main circuit protection for DC House power system
Cranking rating
700A DC
Continuous rating
300A DC
Voltage
48VDC maximum
House circuit protection
100A DC
Dimensions
5.25 W x 6.50 H
BSS8080
SINGLE CIRCUIT
MINI BATTERY SWITCH PANELS
Enables a failed House or Start battery bank to be isolated from the
electrical system and both House and Start loads to be operated from
the remaining battery bank.
Isolates Start circuit from House circuit
Simplifies battery switch operation
Protects electronics from sags and spikes caused by engine cranking
Discharges batteries independently
Automatic Charging Relay automates charging both batteries
Ignition protected - Safe for installation aboard gasoline powered
boats
Cranking rating
700A DC
Intermittent rating
500A DC
Continuous rating
300A DC
Voltage
48VDC Maximum
BSS8280 Single circuit On/Off, 6.25 W x 7.50 H
BSS8370 Single circuit On/Off, 9.50 W x 3.75 H
ADD A BATTERY DUAL CIRCUIT SYSTEM
System includes
5511e, Dual Circuit Plus Battery Switch
Simplifies switching
Isolates engine and house circuits
Combines batteries for emergency starting
7610, 120 Amp SI Starting Isolation Automatic Charging Relay
Automatically combines batteries during charging
Isolates batteries when discharging and starting engines
BSS7650
200
Electrical
SINGLE ENGINE,
TWO BATTERY BANK CLUSTER
Ensures you will always have a fully charged reserve battery. When
the switch is in position 1 it becomes the sensing battery for the VSR.
Battery 2, which is in isolation, will be charged via the VSR when
the engine is running, ensuring it is always fully charged. When the
switch is in battery 2 position this becomes the sensing battery and
battery 1 is charged via the VSR.
BEP714-100A
HIGH CURRENT
REMOTE OPERATED VSR BATTERY SWITCH
Dual Battery Sensing can be operated through a momentary button
on the dash and will instigate a preset time of 10 minutes. Once this
10 minutes has passed, if the voltage is up high enough for the voltage
sensitive relay to operate, it will stay engaged. If not, it will disengage.
Engine run sensing VSS will engage when the voltage on either start or
house battery reaches 13.7 volts. If the combined battery voltage drops
below 13.0 volts and the engine is not running, after 5 seconds the
contacts will open and stay open until the start or house battery voltage
is greater than 13.7 volts. If the combined battery voltage drops below
12.2 volts and the engine is running, after 5 minutes the contacts will
open and stay open until the start or house battery voltage is greater
than 13.7 volts. If voltage drops below 13 volts and stays above12.2
volts on either start or house battery while engine is running, the VSS
will stay engaged. Ignition protected.
Continuous Rating
275 Amps DC
Intermittent Rating
455 Amps DC
Cranking Rating
1250 Amps DC
Voltage Rating
8-15 Volts DC
Stud size
2 x 3/8
Dimensions
2.7 L x 2.7 W x 4 H
BEP701-MDVS
SINGLE ENGINE VSR BATTERY
DISTRIBUTION CLUSTER SQUARE
Can be used in the following systems
1. Single outboard without auxilliary charge output.
2. Single alternator inboard engine without high performance battery
sensed regulator.
System supplied with 125 Amp Voltage sensitive relay.
BEP716-SQ-100A
ML-SERIES HEAVY-DUTY
REMOTE BATTERY SWITCHES
BATTERY DISTRIBUTION CLUSTER WITH
TWIN VSRS
This system is designed for twin outboard installations using
outboards without auxilliary outputs. It will allow the port engine to
charge the port start battery and the house battery when the port
VSR is engaged refer VSR spec for operation of VSR . It will also
allow the starboard engine to charge the starboard start battery
and the house battery when the starboard VSR is engaged, giving
a combined charge from two outboards into the house battery until
the voltage regulators on both engines control the charge. It will also
allow the house battery to be charged if steaming on one engine.
BEP717-100A
Includes ML-Series Remote Control Contura Switch 2145
Manual control switch provides an added level of safety allowing
control with or without power, and offering Locked Off capability for
servicing
300 Ampere continuous rating for use as a remote battery switch for
inboard gasoline or diesel engines, reducing long cable runs
Magnetic latching draws no current in ON or OFF state, only
draws current when changing state of switch
Silver alloy contacts provides high reliability for switching live loads
Manual switch provides an added level of safety, allowing control with
or without power, and offering lockout capability for servicing
3/8”-16 Tinned copper studs
Waterproof
Cranking Rating
700A DC
Continuous Rating
500A DC
Maximum Voltage Rating
32VDC
BSS7700
BSS7701
BSS7703
BSS2145
ML switch with manual control 12V DC
ML switch 12V DC
ML switch 24V DC
Remote Contura switch
Electrical
201
L-SERIES ELECTRONIC SWITCH
Hermetically sealed / Waterproof / Vapourproof UL 1500
Pulse circuit requires very low current draw when contact is closed
Used as a manual battery paralleling switch
Integrated coil control minimizes heating and amperage draw
Input voltage
9-36V DC
Power consumption
Inrush max, 130 ms 3.80 A
12-36V
holding 0.13 A
12V, 0.07
24V
Contact Form
SPST-NO
Cranking Rating
500A
Continuous Rating
250A
Mechanical Life
1,000,000
BSS9012
%QNG*GTUGG%Q
%QNG*GTUGG%Q
CONTINUOUS DUTY SOLENOIDS
Copper ignition and ground terminals,
plated steel housings,
copper contact terminals, 5/16”-24 thread.
24059-08BP
24200
M200BP
65AContinuous duty
110A Continuous duty
750A make , 100A break Intermittent duty
SI-SERIES
AUTO CHARGING RELAY
Allows temporary isolation of house loads from engine circuit during
engine cranking to protect sensitive electronics. Automatically combines
battery banks during the charging cycle and isolates under discharge.
Continuous rating 120 amps
12/24 Volt auto ranging voltage input
Hermetically sealed contacts/vaporproof
Waterproof rated IP67 - temporary immersion for 30 minutes
Ignition protected - safe for installation aboard gasoline powered boats
Remote LED output indicates relay state away from ACR
BSS7610
VOLTAGE SENSITIVE RELAY
Modern charging systems must be able to safely
charge two or more different types of batteries from
one engine. Now, thanks to BEP’s unique VSR
Voltage Sensitive Relay boat owners can enjoy the
benefits of fully charged engine starting batteries and
deep cycle house batteries with one easy to install
charging system.
For use on 12V charging systems up to 125amps
BEP710-125A
CYRIX-I 12/24V 100AMP
BATTERY COMBINER
A microprocessor controlled heavy duty relay that
automatically connects batteries in parallel when one
of them has reached a preset voltage indicating that
the battery is being charged , and disconnects when
the voltage decreases below float level indicating that
one or more batteries are being discharged . Can be
engaged with a switch to connect batteries in parallel.
No voltage loss.
Voltage
12/24VDC
Max Amps 100A
CYR010100000
ML-SERIES HEAVY-DUTY
AUTOMATIC CHARGING RELAY
Includes ML-Series Remote Control Contura Switch PN 2146
Start Isolation SI -Can be configured for temporary isolation of
House loads from Engine circuit during engine cranking to protect
sensitive electronics
Engine Isolation EI -Can be configured for isolation of two
engines while both are running to protect engine electronics and
maximize alternator output
LED output to remotely indicate
3/8 -16 tin-plated copper studs
Waterproof
Cranking Rating
700A DC
Continuous Rating
500A DC
BSS7620
BSS7621
BSS7622
BSS7623
BSS2146
ML-Relay 12V DC
ML-Relay 24V DC
ML-Relay 12V DC w/ manual override
ML-Relay 24V DC w/ manual override
Remote Contura switch
MARINE BATTERY ISOLATORS
Rated for use with DC devices that range from 10 amps to 130 amps
output, and will operate on 6, 12, 24 and 32 volt negative ground
systems. These solid state devices allow electrical current to flow from
your DC source to the batteries in one direction only. This allows one
or two devices to charge multiple battery banks without the banks being
connected DC devices ie Alternators, Generators, Battery Chargers .
NOTE All isolators impose a .6 volt drop in the circuit. Contact your
marine electrician or Professional Mariner if you feel this may cause a
problem in your system.
1-70-2
1-70-3
2-70-2
2-70-3
1-130-2
1-130-3
2-130-2
2-130-3
1 Alt. / 2Batt.
70 Amp
1Alt. / 3 Batt.
70 Amp
2 Alt. / 2 Batt.
70 Amp
2 Alt. / 3 Batt.
70 Amp
1 Alt. / 2 Batt.
130 Amp
1 Alt. / 3 Batt.
130 Amp
2 Alt. / 2 Batt.
130 Amp
2 Alt. / 3 Batt.
130 Amp
%QNG*GTUGG%Q
%QNG*GTUGG%Q
BATTERY ISOLATORS
Isolate batteries to prevent the battery with the higher charge from
draining into the battery with the lower charge. Allow two batteries to
be charged simultaneously from a single power source. Contains solid
state circuitry embedded in the insulation for efficient heat dissipation.
Wiring instructions included.
48080
48070
48090
48120
48160
42 amp max
70 amp max
90 amp max
140 amp max
200 amp max
202
Electrical
MAX CHARGE REGULATOR
The most advanced regulator available
7-Selectable charging programs
Alternator & battery 2 temp. sensing
Alpha-numeric LED display
Fully potted circuitry
User Adjustable advanced programing
Typically, more than 70 of the energy put into battery banks is
generated while away from the dock. That’s why it’s essential to control
your engine’s alternator with the smartest, most powerful voltage regulator
available. 12-volt and 24-volt Max Charge regulators provide the ultimate
combination of programmability, and built-in charging intelligence to keep
your batteries at their best. Add the benefits of automatic alternator and
battery temperature sensing optional sensors MC-TS-A and MC-TS-B,
are required for even greater safety and control. .
BALMC-614-H
BALMC-624-H
12V with 54” Harness
24V with 54” Harness
MAX CHARGE DUAL REGULATOR
Compatible with dual alternator single engine applications.
BALMC-612-DUAL-H
PRO ISOCHARGE
ProIsoCharge delivers digitally controlled alternator output
distribution while protecting the health of engine start batteries.
Eliminate typical alternator voltage loss of up to .6VDC that is
commonly associated with traditional diode based isolators.
Intelligent zerp volt loss isolation ensures fully charged batteries and
faster charging times. Installed with the ProNautic P Series chargers,
a boat owner can enjoy the full benefit of shore power and on the
water charging.
23121
23122
23124
12V, 120 Amp, 1 Alt / 2 Batt
12V, 180 Amp, 1 Alt / 2 Batt
12V, 120 Amp, 1 Alt / 3 Batt
12V with 54” Harness
ARS-5 REGULATOR
5-Selectable charging programs
Alternator & battery temp. sensing
Alpha-numeric LED display
Fully potted circuitry
While it carries the same smart charging
profiles of the premium Max Charge regulator, the ARS-5 features
programming limited to two simple elements battery type and drive
belt to alternator output ratio. The bright, easy-to-read LED display
monitors basic, or in-depth operational data. Alternator and battery
temperature sensing optional sensors MC-TS-A and MC-TS-B, are
required adds even greater functionality.
BALARS-5-H
12V with 54” Harness
CENTERFIELDER
Most of the time, with the output from two alternators charging
to one battery bank, the weaker alternator is not driven to output
to its maximum potential. Balmar’s Centerfielder monitors both
alternators and regulators on a twin engine application, and
drives both alternators to work together to charge a large single
house battery bank, making it possible to utilize the combined
output from both alternators to double charging efficiency. Must
be used in conjunction with Max Charge MC-612 or MC-624
regulators only.
BALCF-12/24
12/24 Volt
DIGITAL DUO CHARGE
Different battery technologies have different charging needs. Why
would you trust an old-fashioned combiner or isolator . The Digital Duo
Charge DDC eliminates the need for those unsophisticated devices.
Programmable for four common battery types GEL, AGM, standard &
deep cycle flooded , the DDC controls voltage, current and temperature
with optional TS-B to ensure safe and trouble-free charging at the
engine battery. Up to 30-amp output. Use with an optional high amperage
solenoid for larger battery loads. Adjustable for 12V or 24V systems.
BALDDC-12/24
12/24 Volt
TEMPERATURE SENSORS
Required to provide maximum protection for your
alternator and battery when using Balmar’s Max
Charge 612 / 624, ARS-5 Regulators or Digital
Duo Charge.
BALMC-TS-A
BALMC-TS-B
Alternator temp
Battery temp
ECHO CHARGE
Xantrex’ digital echo charge is designed to charge auxiliary or starting
batteries from an inverter/charger or other charging source with limited
voltage drop. The Xantrex echo charge detects when the house
battery bank is being charged and directs a portion of the charge
current to auxiliary or starting batteries. The maximum charger current
offered by echo charge is limited to 15 amps.
15 A maximum charge current
Automatically adjusts for 12 or 24 volt battery banks
both battery banks must be the same DC voltage and battery type
Automatically switches on/off without affecting the
in-house battery bank or over-charging
Utilizes excess current from the primary charging source
Thermal and over-current circuits & reverse polarity protection
Easy three wire installation
82-0123-01
Electrical
The Simple Solution
For Smart Charging While Underway
Packaged to make it easier for you and your customers to choose
the perfect alternator/regulator combination, Balmar’s 12VDC
charging system kits deliver fast, intelligent battery charging for a
wide variety of gas or diesel engines. Balmar pairs its USCG, ISO,
CE and SAE safety compliant 6-Series Smart Ready alternator,
with the intelligent, multi-stage ARS-5 Regulator to ensure optimal
care for starting and deep-cycle flooded, gel, AGM and spiral wound
Optima batteries -- and adds even more charging safety and control
with temperature sensors for the alternator MC-TS-A and battery
MC-TS-B . 60-Series kits also include hardware kits for most
Yanmar installations. The Smart Ready feature provides a internal
backup single stage regulator which is easily activated for additional
reliability.
203
TRANSIENT SPIKE PROTECTOR
The TSP responds to potentially damaging power spikes by
creating a pathway to ground, increasing the chance of protecting
your alternator’s diodes from catastrophic failure. Color-coded
wiring ensures proper installation.
BALTSP-12
BALTSP-24
12VDC
24VDC
UNIVERSAL ADJUSTMENT ARM
Ideal for custom mounting brackets, or in installations where
additional alternator swing is required. Install as is or trim, as needed,
to ensure a perfect fit. Constructed of thick 1/4” steel stock with a
powdercoat finish for added protection. 1/4” x 1” x 10”
BALUAA
6-SERIES ALTERNATORS
Light-duty 6-Series Alternators are engineered to replace most OEM alternators on a wide variety of marine gasoline and diesel engines.
Kits include alternator, ARS-5 regulator, alternator/battery temp. sensors & hardware kit.
60-SERIES KIT
60-SERIES
SADDEL MOUNT 3.15 ID
ALTERNATOR ONLY
BAL60-YP-70-SR
BAL60-YP-100-SR
BAL60-YP-120-SR
BAL60-70-SR-IG
BAL60-100-SR-IG
BAL60-120-SR-IG
621-SERIES KIT
WITH 1 OR 2 FOOT
621-SERIES
ALTERNATOR ONLY
BAL621-VUP-70-SR
BAL621-VUP-100-SR
BAL621-VUP-120-SR
BAL621-70-SR-IG
BAL621-100-SR-IG
BAL621-120-SR-IG
12VDC, 70 amp, single pulley
12VDC, 100 amp, single pulley
12VDC, 120 amp, dual pulley
12VDC, 70 amp, single pulley
12VDC, 100 amp, single pulley
12VDC, 120 amp, dual pulley
LARGE & X-LARGE CASE ALTERNATORS - For commercial and heavy duty diesel applications
94-SERIES ALTERNATORS
Designed for installations where a single 2” foot Delco-style mount is
required. Oversized bearings are used for better cooling. Heavy duty
custom windings deliver maximum low RPM performance. Isolated
ground for installation on steel or aluminium boats. Bi-directional
cooling fan. Meets USCG Title 33 Safety Standards
BAL94-165-12-IG
BAL94-210-12-IG
BAL94-140-24-IG
12VDC 165 amp, dual pulley
12VDC 210 amp, dual pulley
24VDC 165 amp, dual pulley
95-SERIES ALTERNATORS
Great size-to-output ratio for tighter mounting spaces. J-180 saddlestyle 4” mounting. Extra-large bearings and heavy gauge custom
windings deliver maximum low RPM performance. Isolated ground
for installation on steel or aluminium boats. Bi-directional cooling fan.
Meets USCG Title 33 Safety Standards
BAL9504-165-12-IG
BAL9504-210-12-IG
BAL9504-140-24-IG
12VDC 165 amp, dual pulley
12VDC 210 amp, dual pulley
24VDC 165 amp, dual pulley
97-SERIES ALTERNATORS
These extra large case alternators are a brushless design for sustained
duty applications. They have a 4” J-180 saddlestyle mount. Oversized
bearings and high amperage diodes are designed to insure an extended
life. Isolated ground for installation on steel or aluminium boats.
Bi-directional cooling fan. Meets USCG Title 33, CE, SAE 8846 and ISO
J-1171 ignition protection requirements.
BAL9704-160-12-IG
BAL9704-140-24-IG
12VDC 160 amp, dual pulley
24VDC 140 amp, dual pulley
98-SERIES ALTERNATORS
Built to provide performance in a league with an auxiliary gensets, this
alternator can deliver up to 5KW. This extra large case alternator features
a brushless design which eliminates a critical wear point, increases ignition
protection and delivers greater field efficiency. Includes a 4” J-180 saddlestyle mount. Dual cooling fans help insure cooler operation. Isolated
ground for installation on steel or aluminium boats. Meets USCG Title 33,
CE, SAE 8846 and ISO J-1171 ignition protection requirements.
BAL98-12-310-IG
BAL98-24-220-IG
12VDC 310 amp, dual pulley
24VDC 220 amp, dual pulley
204
Electrical
CENTAUR BATTERY CHARGERS
The Centaur model range features auto-ranging input covering 90-265VAC 50/60Hz input meaning they
can be used anywhere in the world. Crucially, and unlike other products that state universal input, the
Centaur range will maintain full output power within the entire specified range.
Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of
an adverse environment heat, humidity and salt air. Circuit boards are protected with an acrylic coating
for maximum corrosion resistance. Temperature sensors ensure that power components will always
operate within specified limits
Fully automatic three stage charging that ensures batteries are fully charged every time. Three isolated
outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current.
All Centaur chargers are cooled by a temperature & current controlled fan. They also include ignition
protection and a total output ammeter.
CCH012020000
CCH012030000
CCH012040000
CCH012050000
CCH012060000
CCH012080000
CCH012100000
CCH024016000
CCH024040000
CCH024060000
CCH024080000
CCH024100000
Volts Amps
Banks Size H x W x D
12
20
3
14” x 8.5” x 4.3”
12
30
3
14” x 8.5” x 4.3”
12
40
3
16.8” x 9.4” x 5.3”
12
50
3
16.8” x 9.4” x 5.3”
12
60
3
16.8” x 9.4” x 5.3”
12
80
3
19.9” x 10” x 5.1”
12
100
3
19.9 x 10.0 x 5.2
24
16
3
14” x 8.5” x 4.3”
24
40
3
19.9 x 10.0 x 5.1
24
60
3
19.9 x 10.0 x 5.2
24
80
3
19.9 x 10.0 x 9.1
24
100
3
19.9 x 10.0 x 9.1
PHOENIX BATTERY CHARGERS
Adaptive 4-stage charge characteristic bulk – absorption – float – storage The Phoenix
charger features a microprocessor controlled adaptive’ battery management system that can
be preset to suit different types of batteries. The adaptive’ feature will automatically optimise
the process relative to the way the battery is being used.
The right amount of charge variable absorption time. When only shallow discharges
occur a yacht connected to shore power for example the absorption time is kept short in
order to prevent overcharging of the battery. After a deep discharge the absorption time is
automatically increased to make sure that the battery is completely recharged.
If, in order to quickly charge a battery, a high charge current in combination with a high
absorption voltage has been chosen, the Phoenix charger will prevent damage due to excessive
gassing by automatically limiting the rate of voltage increase once the gassing voltage has been
reached.
The storage mode kicks in whenever the battery has not been subjected to discharge during
24 hours. In the storage mode float voltage is reduced to 2.2 V/cell 13.2 V for 12 V battery to
minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to
the absorption level to equalize’ the battery. This feature prevents stratification of the electrolyte
and sulphation, a major cause of early battery failure. Every Phoenix charger comes with a
battery temperature sensor.
In order to compensate for voltage loss due to cable resistance, Phoenix chargers are provided
with a voltage sense facility so that the battery always receives the correct charge voltage.
Auto-ranging input covering 90-265VAC 50/60Hz input.
PCH012030001
PCH012050001
Volts Amps
Banks Size H x W x D
12
30
3
13.8 x 7.9 x 4.3
12
50
3
13.8 x 7.9 x 4.3
Electrical
PRONAUTIC PBATTERY CHARGERS
205
ProMariner’s all digital ProNautic P Series delivers the most advanced solution to charging and conditioning your vessels engine and house bank
battery s . The ProNautic P Series features leading edge technology and global energy management features. Designed to be used world wide
automatically, while managing the state and condition of all your on-board batteries. Significantly smarter, faster and best suited to extend the life of
your vessel’s batteries. The Optional Remote Digital Helm Display and Control is also available. A wide assortment of models to include 12 and 24
volt DC systems. Designed to give you more time on the water enjoying what you like most.
Distributed On Demand Technology automatically senses and distributes 100 of available
charging amps to any one bank or combination of all banks
Global AC Input 100-260 VAC 50/60 Hz
Power Factor Corrected Fully automatic wide range AC input
All digital design
12 Selectable Charge Profiles
User selectable equalization mode
Conservation Energy Saver Mode
Charger automatically will go into standby during non use periods
Dual Digital Displays with Power Output Bar Real time status of charging volts,
amps and percent of power out
On Board Self Test Start up Diagnostics
Automatic Battery Health Mode
Quiet and efficient charging, cooling and ventilation
Innovative front exhaust prevents air flow and cooling restriction
Built In Safety with Automatic Temperature Compensation
Ignition protected and current limiting
Industry recognized with the 2010 IBEX Innovation Award
63110 12V, 10 Amp, 2 bank 10.25 x 8.5 x 3.5
63115 12V, 15 Amps, 3 bank 10.25 x 8.5 x 3.5
63120 12V, 20 Amp, 3 bank 10.25 x 8.5 x 3.5
63130 12V, 30 Amp, 3 bank 10.25 x 8.5 x 3.5
63170 24V, 20 Amp, 3 bank 10.25 x 8.5 x 3.5
63140 12V, 40 Amp, 3 bank 10.25 x 8.5 x 3.5
63180 24V, 30 Amp, 3 bank 12.25 x 8.5 x 3.5
63150 12V, 50 Amp, 3 bank 12.25 x 8.5 x 3.5
63160 12V, 60 Amp, 3 bank 12.25 x 8.5 x 3.5
63100 Optional digital display & remote control panel
TRUECHARGE 2 CHARGERS
Leads the industry with a small footprint and ultra-compact design. In addition to meeting global safety and
regulatory standards, TrueCharger2 battery chargers feature low electrical interference and superior, efficient,
power factor corrected multistage charging. They can be mounted virtually anywhere, given their unique
drip-proof design. The easy-to-read onboard display can be augmented with an optional remote panel for the
20/40/60A 12V & all 24V models.
Microprocessor-controlled, multistage charging algorithms
Setting for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage 90-270VAC, 47-63Hz is also compatible
with a generator or other low-quality power sources
Temperature-compensated charging
20A, 40A, 60A & all 24Vmodels feature parallel stacking that enables
delivery of twice the rated output when used with the optional remote
Power factor corrected for efficient charging
Battery-equalization feature
Battery temperature sensor available part 808-0232-01
Protected from reverse polarity, over/under temperature,
DC over voltage, over charging and ignition protected
Two year warranty
Volts
Amps Bank
Dimensions H x W x L
804-1210
804-1220
804-1240
804-1260
12
10
2
2-3/4 x 5-1/2 x 8-7/8
12
20
3
2-3/4 x 6-5/8 x 9-7/8
12
40
3
2-3/4 x 6-5/8 x 9-7/8
12
60
3
2-3/4 x 6-5/8 x 13-3/4
804-2410
804-2420
804-2430
24
10
3
2-3/4 x 6-5/8 x 9-7/8
24
20
3
2-3/4 x 6-5/8 x 9-7/8
24
30
3
2-3/4 x 6-5/8 x 13-3/4
808-0232-01
808-8040-00
808-8040-01
Battery temp. sensor
Optional remote panel for all TrueCharge 2 Gen I chargers, except 804-1210
Optional remote panel for all TrueCharge 2 Gen II chargers, except 804-1210
808-8040-00
206
Electrical
PACIFIC SERIES BATTERY CHARGERS
Applying two decades of electrical product design and manufacturing expertise, Blue Sea
Systems has developed the PACIFIC SERIES Battery Chargers.The PACIFIC SERIES Battery
Chargers, with their advanced multistage charging technology, are engineered to perform in harsh
conditions. Boats operate in challenging environments for any electrical or electronic device. The
three conditions causing the greatest problems for chargers are moisture, heat, and low quality
AC input voltage.To combat moisture, the PACIFIC SERIES Battery Chargers have a drip-proof
design with an integrated venting system protecting them from wipe downs and drips. Instead of
plastic or sheet metal cases, the Pacific Series’ rugged, finned aluminum case dissipates heat
and leads to longer battery charger life. Blue Sea Systems developed Input Power Response
IPR to match the charge output to the quality of the AC voltage input which reduces
component stress. PACIFIC SERIES Battery Chargers use modern MOSFET circuitry instead
of diodes for output power distribution to improve efficiency & reduce heat. PACIFIC SERIES
Battery Chargers vary absorption stage voltage according to the chemistry selected by the
user for each of the three battery banks. This extends battery life and increases performance
by providing each battery bank with the voltage specified for its particular chemistry BSC .
Power factor corrected for efficient charging
Battery Specific Charging BSC charges a mix of flooded, Gel and AGM batteries
Universal Line Voltage 90-265V AC 50/60 Hz for use anywhere in the world
Advanced Multi-Stage Charging Bulk, Absorption, Float stages
Battery Health which repeats the charge cycle weekly during storage or over extended
periods
User selected battery equalizing function
Over and under temperature protection, Surge and short circuit protection
DC over voltage protection & AC reverse polarity protection
Conformal coated circuit boards
Rugged Finned Cast Aluminum Case for maximum heat dissipation
Large Bright Backlit Display shows Charge current, charge voltage, and charge cycle specific to each battery
5 Year Warranty and Blue Sea Systems commitment to customer support
Optional Remote Display
Repeats battery charger onboard display information in convenient location
DC Amps– net of charger input and loads for house battery
Amp-Hour and State of Charge for house battery with purchase of PN 8255 DC shunt 500A DC/50mV
BSS7521
BSS7522
BSS7523
BSS7519
20A 3-bank, 12V, 11.66 x 16.3
40A 3-bank, 12V, 11.66 x 16.3
60A 3-bank, 12V, 11.66 x 18.27
Optional remote display
7519 Remote Display
7519 Shown in
360 Panel System
PROSPORT BATTERY CHARGERS
Heavy Duty Recreational Series
Distributed-On-Demand
technology - automatically senses and distributes 100 of available
charging amps to any one bank or combination of all banks
Automatic multi-stage charging - charges and conditions batteries with a built in safe
maintenance mode for long and short term storage
High visibility LED status center provides at-a-glance status of AC power, charge mode,
battery type, and ready/ maintenance mode
Digital battery type selector user selectable performance charge profiles for
Flooded lead acid / STD AGM, GEL & High performance HP AGM
Extruded aluminium housing - for superior heat transfer and durability
Waterproof and shock resistant - saltwater tested for coastal sport fishing and boating
Dynamic thermal output control - provides appropriate charging amps to your batteries while
maintaining recommended charger temperature
Dual in line DC safety fuses for trolling motor / accessory battery banks, dynamic thermal output
control, over voltage, overload, over temperature, reverse polarity and ignition protection.
Pre-wired for easy installation, 5 AC/DC
2 year warranty
42006
42008
42012
42020
42021
51060
Volts
Amps Banks Cable size
ProSport 6
12
6
1
6
ProSport 8
12/24
8
2
6 /6
ProSport 12
12/24
12
2
6 /6
ProSport 20
12/24
20
2
6 /6
ProSport 20 Plus
12/24/36 20
3
6 /6 /6
Remote Battery Bank Status Monitor, 12V, 1-3 banks
Size L x W x H
5.75 x 7.25 x 2.5
7 x 7.25 x 2.5
8.5 x 7.25 x 2.5
10.75 x 7.25 x 2.5
10.75 x 7.25 x 2.5
51060
Electrical
GENIUS
207
SMART BATTERY CHARGERS
The NOCO Genius automatically diagnoses, recovers, charges & maintains your batteries Now that s smart...wicked smart. Compact
lightweight design, easy to install and fit into tight locations. Safety features include Reverse Polarity, Short-Circuit, Open-Circuit, OverTemperature, Over-Charging, Spark Proof and Ignition Protected.
Advanced 8-Step Charger
90 Energy Efficient
Rapid Charging Technology
Variable Input Compensated
Fully Interactive, MCU Controlled
Safely Charges Wet, Gel, MF & AGM Batteries
Designed for Safety, Protects Against User Errors
Fully Sealed for Harsh Environments
Volts
GEN1
GEN2
GEN3
Amps
/Bank
Total
Amps
Banks Size L x W
x H
12V
10
10
1
6.0 x 5.1 x 2.5
12-24V
10
20
2
7.0 x 6.0 x 2.5
12-36V
10
30
3
11.0 x 7.3 x 2.9
PROMITE BATTERY CHARGER
Fully automatic charging
Charges and conditions batteries with a built in safe maintenance
mode for long and short term storage
Automatic charging for lead or gel batteries
Waterproof and shock resistant, saltwater tested
Built-in protection reverse polarity, ignition & temperature
LED power and charge indicators for At-a-glance power and
charging status
Pre-wired for easy installation
31305
12V, 5 Amp, 1 bank
G1100 6V & 12V 1.1A 7-STEP
MULTI-PURPOSE BATTERY CHARGER
The G1100 is a smart, 7 step, fully automatic switch-mode battery
charger and maintainer. The G1100 is best for small battery applications
from 2.2-40Ah, such as charging your Motorcycle, ATV, Jet Ski or
Snowmobile. In addition to charging, the G1100 can effectively maintain
any 6V or 12V batteries in larger applications, such as cars, RVs, boats
and trucks. Includes battery clamp & eyelet terminal connectors.
G1100
1.1A 1100mA
G7200 12V & 24V 7.2A 12-STEP
MULTI-PURPOSE BATTERY CHARGER
The G7200 is a smart, 12 step, fully automatic switch-mode battery
charger and maintainer. The G7200 restores batteries to their original
capacity, recovers slightly sulfated batteries, charges batteries in
cold climates, rescues drained batteries, and provides maintenance
charging to increase battery life. A powerful battery charger with
specialized charging modes for recovering severely drained batteries
that will not accept a normal charge. Suitable for most 12V and 24V
battery capacities from 14-230Ah, such as motorcycles, ATVs, UTVs,
snowmobiles, jet skis, cars, RVs, boats and trucks.
G7200
G3500 6V & 12V 3.5A 8-STEP
MULTI-PURPOSE BATTERY CHARGER
The G3500 is a smart, 8 step, fully automatic switch-mode battery
charger and maintainer. The G3500 restores batteries to their original
capacity, recovers slightly sulfated batteries, charges batteries in cold
climates, rescues drained batteries and provides maintenance charging
to increase battery life. A versatile battery charger that provides charging
modes for both large and small batteries from 1.2-120Ah, such as cars,
RVs, boats and trucks, as well as for motorcycles, ATVs, jet skis or
snowmobiles.
Includes battery clamp & eyelet terminal connectors.
G3500
3.5A 3500mA
7.2A 7200mA
PROSPORT 1.5
BATTERY MAINTAINER
Fully automatic
Reverse polarity protected
LED Light signifies proper operation
& doesn t drain battery if AC off
Current limiting
Over temperature protection
Field adjustable for gel batteries
Output 1.5 Amps
Precision regulated 13.4 vDC float mode
Application 12V Batteries, 10-250 Amp hrs
10115P
10116P
ProSport 1.5 Portable
ProSport 1.5 Hard wired
208
Electrical
SOLAR-POWERED BATTERY CHARGERS
Noco Solar-Powered Battery Chargers are designed to harness the useful energy
of the sun to provide a maintenance-level charge to a vehicles battery. These
Solar-Powered Battery Chargers use the most advanced solar technology for
optimal performance, even in over-cast conditions.
Operating temperature -40 to 176 F -40 to 80 C
Prolongs battery life
Never over-charges batteries
Built-in diode for reverse current protection
ISC125
ISC175
ISC400
ISC1000
ISCC1
ISCC2
1.8 Watt 125mA 13.2” x 5.8” x 0.47”
2.2 Watt 80mA 13.8” x 8.4” x 0.5”
5.5 Watt /400mA 13.6” x 19.6” x 0.6”
15 Watt / 1Amp 38.2” x 13.5” x 0.8”
Charger controller for 15 Watt panel
4-way connector for connecting up to 4 5/15Watt solar panels
PROSPORT CUP HOLDER INVERTER
Converts 12-volt battery power to 110V AC up to 150 watts.
Extruded aluminum case.
Standard 110V AC receptacle.
Output short and input polarity protection.
Low battery shutdown.
3 feet of cable with plug
79018
TRUPOWER SERIES MODIFIED SINE-WAVE INVERTERS
Rich with features, TruePower offers Bat Saver Mode operation on its 400 to 1000 watt models so your
engine crank battery will stay above 11.5V to start your boat or vehicle. Other high end features include
dual LED bar graph displays and remote port on all models between 600 and 1000 watts. The 1500 watt
model includes a removable deluxe ultra bar graph remote that can be surface or flush mounted.
Advanced electronic modified sine wave technology
GFCI safety protected AC outlets for maximum ground safety protection
Bat Saver Auto Mode automatically reserves battery power for
engine start 400-1000 watt models
Soft start and noise filtered technology for power demanding loads
Anti-Corrosion protection
User friendly operation
LED power & fault indicators
Bult-in safety including GFCI, thermal, reverse polarity,
low battery & short circuit protection, constructed to UL458
Model
Wattage Surge rating Size
05040 TruePower 400
400
800
9.25 x 6 x 3
05060
05080
05100
05150
05121
TruePower 600
TruePower 800
TruePower 1000
TruePower 1500
On/Off Fault Remote
600
800
1000
1500
800-1000
1200
1600
2000
3000
N/A
12 x 8.2 x 3.5
14.4 x 8.2 x 3.5
14.4 x 8.2 x 3.5
17.8 x 10 x 3.5
2.3 x 1.8 x 0.8
PHOENIX COMPACT PURE SINE-WAVE INVERTERS
SinusMax - Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of
applications. The design criteria have been to produce a true sine wave inverter with optimised
efficiency but without compromise in performance.
Extra start-up power
LED diagnosis
Optional Remote on/off switch
Optional Remote control panel 750VA model only
Continuous
Output
Dimensions
Output Watts volts
Peak Power Input voltage
H x W x D mm
PIN012181110
PIN012351110
PIN012751110
180W
120VAC
200W
10.5-15.5
72 x 132 x 200
350W
120VAC
500W
10.5-15.5
72 x 155 x 237
750W
120VAC
1400W
10.5-15.5
72 x 180 x 295
Electrical
209
XS400 PURE SINE-WAVE INVERTER
Quality sine wave output, the Xantrex Sine Wave Inverter XS400 is designed specifically to power
entertainment systems in boats and recreational vehicles. Its clean utility grade output will not
produce noise and distortion on TVs, VCRs, DVDs and stereos.
400 watt inverter with 800 watt surge
Filtered sine wave output
Built-in transfer switch
Dual AC outlets and hardwired AC connections
Battery over-voltage and under-voltage protection
Over temperature shutdown, automatic overload, short circuit & Ground fault protection
3.7 H x 7.4 W x 13.5 D
806-0400
PROWATT SW TRUE SINE-WAVE INVERTERS
With high surge capability, the PROwatt SW Series provides the necessary current to startup
demanding electrical loads. In addition to dual GFCI AC receptacles, the PROwatt SW Series include
an innovative USB connection for providing power to most USB chargeable devices. When equipped
with a remote control, the PROwatt SW Series has the ability to provide automatic ignition lockout
shutting down the inverter’s output when the vehicle’s ignition is not engaged. With True Sine-Wave
output, the PROwatt SW Series can provide power for all types of electrical loads including, variable
speed power tools, advanced electrical appliances, microwaves and much more.
Built-in digital display for DC volts and output power
Built-in USB port
Dual GFCI AC receptacles for safe operation
Heavy duty terminals for trouble-free battery connection
Low voltage shutdown 10.5 Vdc / Low voltage alarm 11.0 Vdc
Over voltage protection 15.5 Vdc
Optional remote
GFCI protection
Digital display shows DC voltage, AC output & error codes
Continuous Peak
Description
Watts
Watts Volts In Volts Out
USB Output
Dimensions
806-1206
806-1210
806-1220
808-9001
ProWatt SW 600 600
ProWatt SW 1000 1000
ProWatt SW 2000 2000
ProWatt SW remote panel
1200
2000
3000
12VDC
12VDC
12VDC
PROSINE TRUE SINE-WAVE INVERTERS
104-127VAC
104-127VAC
104-127VAC
5V / 500mA
5V / 500mA
5V / 500mA
3.5 H x 8.7 W x 12.2 L
3.5 H x 8.7 W x 13.4 L
3.9 H x 11.8 W x 13.7 L
PROsine inverters are ideally suited for power systems that already have a quality multistage battery charger. Offering True Sine Wave AC
output, PROsine inverters are built to operate mid-range inductive loads. Their lightweight and compact design makes installation easy.
PROsine hardwired inverters have an optional integrated 15A transfer relay for seamless transition from shore to inverter power. They include a
removable digital LCD panel to provide operating status and control from a remote location. Removable LCD display - requires optional remote
interface kit.
Ultra-clean true sine wave power
With less than 3 total harmonic distortion, PROsine 1000 and 1800 inverters deliver true sine
wave output that is identical to AC power supplied by your utility. This clean output makes PROsine
inverters ideal for handling sensitive loads and improves AC equipment performance. Expect troublefree
true sine wave electricity for televisions, audio systems, variable speed tools, and more.
Lightweight and low profile
Removable LCD display can be mounted remotely for control and monitoring
Innovative DC connection terminals, designed to accept battery cables in 180 of rotation
LCD displays DC Volts, DC Amps and output power
Optional transfer switch available
Powersave mode draws only 1.5 watts under no load
12V and 24V models available
CSA/NRTL certified to UL and CSA standards
Over voltage and under voltage protection
Over temperature shutdown and automatic overload protection
Short circuit and AC backfeed protection
Continuous
Transfer GFCI
Volt
Watts
Surge
Switch Outlet
806-1000
806-1800
806-1802
806-1850
806-1852
808-1800
12
1000
1500
N/A
yes
12
1800
2900
N/A
yes
12
1800
2900
15Amp
24
1800
2900
N/A
24
1800
2900
15Amp
Optional remote interface kit
yes
210
Electrical
TRUEPOWER COMBI QS
COMBINATION BATTERY CHARGER/QUASI MODIFIED SINE WAVE INVERTER
Designed specifically for the most rugged marine applications. Seamless conversion of DC battery power to filtered low noise AC
household power. AC Switch automatically selects AC or DC power inputs depending on which source is available , ensuring AC household
power is available at all times.TruePower QS includes a digitally controlled, True 3-Stage battery charger that can automatically recharge,
condition and maintain batteries. Whether on the water or on the road, TruePower QS Series is ideal for large AC load applications such as air
conditioners, refrigerators, microwaves, hair dryers, office equipment, power tools and more. Select the right model for you
• 2.8xSurgeRatingwith1.0PowerFactor
7 Selectable 3-Stage Battery Charge Profiles
• InstantACtransferswitchpassesACshore/stationpower.Chargesbatterieswhenshore/stationpowerispresent,orswitchessafelyintoDC
toACinvertermode,makingAChouseholdpoweravailableonthewaterorontheroad.
• Built-indigitalcontroltechnologyprovidessevenuser-selectablechargeprofilesfortoday’svariousbatterychemistries
• Filteredquasi(modified)sinewaveACoutput.Idealforappliances,powertoolsandelectronicsInverterdelivers2.8timessurgecapacityfor
demandingapplications–airconditioners,microwaves,refrigeratorsandmorePuresinewavepassesthroughwhileconnectedtoACshore/
stationpower
• DesignedandconstructedtoFCCClassA,MarineUL1236,UL458
01012
01512
01524
02412
02424
Model
DC
Inverter Watts
Charger
Voltage Contiuous/Peak Output
Auto AC
Transfer
Size
LxWxH
TruePower1000QS
TruePower1500QS
TruePower1500QS
TruePower2500QS
TruePower2500QS
12V
12V
24V
12V
24V
30A
30A
30A
30A
30A
17
17
17
17
17
1000 / 3000
1500 / 4500
1500 / 4500
2500 / 7200
2500 / 7200
40Amps
40Amps
20Amps
50Amps
25Amps
FREEDOM HF
MODIFIED SINE-WAVE INVERTER/CHARGERS
x9
x9
x9
x9
x9
With modified sine wave output, Freedom XMIC are designed to run entertainment
systems and small appliances in smaller boats. They are the smallest, lightest and
least expensive models in the Xantrex line up. Designed for demanding marine and RV
conditions. Temperature-controlled multi stage charging ensures that your batteries are
recharged safely and efficiently. Includes an automatic transfer switch and a detachable
digital remote control panel display that provides precise system information and can
be mounted wherever you require the information.
Removable digital display to provide system status
Automatic three-stage battery charger
Battery type settings Flooded/Gel/AGM/Fixed 13.5 Vdc
Designed to be hard wired using a terminal strip, or by connecting AC through GFIC
receptacles
Built in 30-amp relay to automatically transfer between inverter power and incoming
AC utility power
Protection includes Battery over/under voltage protection, over temperature
shutdown, auto overload protection, short circuit protection and ground-fault
protection
806-1020
806-1840
Model
Volts
Output Charger Dimensions
HF1000
12
1000W
20A
4.92 H x 8.3 W x 15.47 L
HF1800
12
1800W
40A
4.92 H x 8.3 W x 17.44 L
x7
x7
x7
x7
x7
Electrical
211
MULTIPLUS
PURE SINE-WAVE INVERTER / CHARGERS
Multi-functional
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features
adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be
reduced when otherwise an overload would occur. The second level will boost the output of a generator
or shore side supply with power taken from the battery.
Uninterrupted AC power UPS function
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi
is automatically activated and takes over the supply to the connected loads. This happens so fast less
than 20 milliseconds that computers and other electronic equipment will continue to
operate without disruption.
Virtually unlimited power thanks to parallel operation
Up to 6 Multi’s can operate in parallel to achieve higher power output. Three phase or split phase
operation is also possible. Please check our datasheets to see which models have paralleling,
three-phase and split phase capabilities.
Four stage adaptive charger and dual battery charging
The main output provides a powerful charge to the battery system by means of advanced adaptive charge software that fine-tunes the three
stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. In addition to this, the Multi
will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery.
CMP122020100
PMP123021100
PMP243021100
Continuous
VDC Inverter output Peak Inverter input
Charger Amps/Banks
Transfer switch Dimensions H x W x D
12V
2000W / 4000W
9.5-17 VDC
80A / 2 Bank
30Amp
520x255x125mm
12V
3000W / 6000W
9.5-17 VDC
120A / 2 Bank
30Amp
362x258x218mm
24V
3000W / 6000W
19-33 VDC
70A / 2 Bank
30Amp
362x258x218m
PROSINE 2.0
TRUE SINE-WAVE INVERTER / CHARGER
A ProSine inverter/charger satisfies the onboard power requirements of the most discriminating mariner with its
state-of-the-art power factor corrected charging and True Sine Wave AC output. It also incorporates automatic
overload, short circuit and over-temperature protection circuitry. A full function remote control panel and battery
temperature sensor is included with the PROsine inverter/chargers. Offering a revolutionary power to weight ratio,
PROsine technology has become the benchmark for premium integrated power systems.
Power Factor Corrected, integral 100A multistage temperature-compensated charger
Built in 30A transfer switch
Equalization mode conditions batteries for longer life
Series stackable, allows two units to provide 240V of split phase AC output and a 200A charger
Small profile and lightweight for easy installation and mounting
Conforms to ABYC guidelines
CSA/NRTL certified to UL and CSA standards Advanced Control System Panel
Inverter/charger on/off remote control
Performs system diagnostics
LCD remote control panel and temperature sensor included
Displays AC and DC system information including volts and amps
Monitors battery temperature so the charger provides an accurate charge in any climate
805-2020
Description
Continuous
Volt Watts
Surge
Transfer
Switch
Charger
Dim. HxWxD
Prosine 2.0
12
30 amps
17-3/4 x 11-1/4 x 5-3/4
2000
4500
100 amps
212
Electrical
TRUEPOWER COMBI PS
COMBINATION CHARGER / PURE SINE WAVE INVERTER
Pure Sine Wave technology is perfect for mobile or on the water audio/visual systems with plasma or LCD flat screen technology. Fully
automatic true 3-stage marine grade battery charger and inverter. Instant 30A AC transfer switch passes AC shore/station power. Charges
batteries when shore/station power is present, or switches safely into DC to AC inverter mode, making AC household power available on
the water or on the road.
• FullyAutomaticBatteryChargerandInverter,InstantACtransferswitchpassesAC
shore/stationpower.Chargesbatterieswhenshore/stationpowerispresent,or
switchessafelyintoDCtoACinvertermode,makingAChouseholdpoweravailable
onthewaterorontheroad.
7 Selectable 3-Stage Battery Charge Profiles
Efficient, Quiet Conversion from DC Power to AC Power
Integrated, Automatic True 3-Stage Marine Grade Battery Charger Built-in digital
control technology provides seven user-selectable charge profiles for today’s various
battery chemistries.
Inverter delivers 2.8 times surge capacity for demanding applications – air
conditioners, microwaves, refrigerators and more. Pure sine wave passes through
while connected to AC shore/station power.
Built-in Safety Overload, Over Temperature, High and Low Battery Voltage Protection,
Designed and constructed to FCC Class A, Marine UL 1236, UL 458, and CE ABYC–A
31 Marine Compliant
Removable Deluxe Remote with On/Off/Standby power modes and high visability LED
indicators for Charger, Inverter and Fault modes.
02012
02024
Model
DC
Inverter Watts
Charger
Voltage Contiuous/Peak Output
Auto AC
Transfer
Size
LxWxH
TruePower2000PS
TruePower2000PS
12V
24V
30A
30A
17 x 9 x 7
17 x 9 x 7
2000 / 6000
2000 / 6000
70Amps
35Amps
FREEDOM SW TRUE SINE-WAVE INVERTER/CHARGERS
Affordable true sine-wave power solution. The Freedom SW inverter / chargers feature true sine-wave output and multi-stage charging to
meet power needs of today s sensitive and sophisticated electronics. They offer industry standard features at a very competitive price. They
provide sine-wave power to operate commonly used AC-powered electronics such as plasma television sets, microwaves, entertainment
systems, computers, printers, power tools, mini refrigerators and much more. Designed for a variety of mobile applications such as commercial,
emergency and recreational vehicles, marine vessels, construction and military equipment.
True sine-wave output to operate sensitive electronics
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Power factor corrected multi-stage charger for fast, efficient charging
Temperature compensated charging for all climate conditions
Series and parallel stacking for 2X output power and 240VAC applications
Wide operating temperature range -20 to 50 C
Conformal coated circuit boards for humid environments
Meets UL458 standards
Battery over-voltage and under-voltage protection
Over-temperature shutdown
Automatic overload protection
Short-circuit protection
Dual input / Dual output AC interface
Compatible with automatic generator start AGS
Optional full featured control panel
Units include remote On/Off panel & battery temp. sensor
Continuous
Volt
Description Watts Peak
AC connections Transfer Relay Charger Banks Size H x W x L
815-2012
815-3012
12V
SW2000
2000W 4000W
Single
30 amps
100A
1
7.75 x 13.5 x 14.25
12V
SW3000
3000W 6000W
Split phase
2 x 30 amps
150A
1
7.75 x 13.5 x 14.25
31-6262-00
809-0921
809-0915
809-0940
809-0942
808-9003
50 cable for remote panel
System control panel
Automatic generator start
25 network cable for control panel
75 network cable for control panel
GFCI kit
Accessories for 815-2000/3000 are not listed here, please contact our Sales Department for assistance
Electrical
XPOWER POCKET POWERPACK
Combines a 100W inverter with a high capacity, high output
battery pack to create a truly mobile power solution.
3-prong AC outlet
USB power port
Blue LED power indicator
DC cable with vehicle & airplane connector
3.3 Ah NiMh battery pack
LED battery status/charge status
100W output power 5 min 80W output power continuous
6.5 L x 3.75 W x 2 H, 2.4 lbs
852-0081
XPOWER POWERPAK 400 PLUS
Portable Powerpaks integrate a battery and inverter to provide
electricity and backup power anytime, anywhere. With features
like jumper cables, built in light, air compressor, modified Sine
Wave inverter, and rechargeable battery with chargers.
Built in 400 watt inverter
Sealed, non-spillable 20 amp-hour AGM battery
3 digit display allows for easy battery status monitoring
320 watts continuous AC output
400 watts 5 minute AC power output
Charging time From AC outlet - max.
35 hours. From DC outlet - max. 4 hours
Six month warranty
9.5 H x 8.1 W x 15.8 L
852-1900
ORION DC / DC CONVERTERS
Most low-voltage equipment, such as navigation and radio equipment, mobile telephones or car hi-fi systems, are
designed for 12 Volts, Victron Energy supplies DC/DC converters which deliver a stable 12 Volt supply from a 24 Volt
system. These products are also distinguished by high efficiency, together with absolute safety.
ORI241220000
ORI241230000
ORI241260000
ORI122410000
Input voltage
Output voltage Max output
Dimensions H x W x D
20-35VDC
13.8VDC
20A
1.9” x 3.5” x 5.0”
20-35VDC
13.8VDC
30A
1.9” x 3.5” x 5.0”
20-35VDC
13.8VDC
60A
3.5” x 4.0” x 7.0”
1-18VDC
24VDC
10A
1.9” x 3.5” x 5.0”
DCVR - DC CONVERTERS
DC - DC Converters for use on 24V systems to supply HF/SSB radios, high power audio, TV’s etc.
High efficiency 90 switchmode voltage converter
Short circuit protected & reverse polarity protected
Fast shutdown protects equipment and wiring
Does not rely on fuses to protect equipment
LED state indicators
Easily installed - fit anywhere - very small size
BEPDCVR-10A
BEPDCVR-20A
10 amp
20 amp
DC SYSTEMS MONITOR DCSM
DC Systems Monitor DCSM Designed and manufactured by BEP, these state of the art full color monitors
are made to meet the systems monitoring requirements of today’s modern vessel and recreational vehicle.
Monitors
Charge/discharge amps for two banks requires 2 shunts
Capacity remaining in A/h and
Battery condition
Tank fluid level requires sender
Circuit status
Features
8 Generic, user configurable inputs
Programmable high/low audio/visual alarms for volts, amps and tank levels
Backlit keypad and dimmable screen
Can be panel or surface mounted
Specifications
2.8” Colour QVGA LCD
Input voltage 8-32VDC
Dimensions Width 38mm 1.50 x High 40mm 1.57
Backlit keypad
BEP80-600-0021-00
BEP600-DCM-5M
BEP600-DCM-10M
BEPLB-450-50
BEPTS1
DCSM with 1x shunt and cable
5M 16.45 cable
10M 32.9 cable
Shunt, 450A / 50mV for DCSM
Ultrasonic tank level sender
213
214
Electrical
VESSEL SYSTEMS MONITOR
DC Monitoring voltage, amperage, battery state of charge - amp hours
remaining time remaining, charge, battery temperature alarms for all values
AC Monitoring voltage, amperage, watts, frequency alarms for voltage, amperage, and frequency
Tank level Monitoring fuel, water, waste, alarms for high level waste, low level fuel, and water
Bilge Monitoring active, cycle count, volume, duration alarms for cycles, volume, duration
Three intuitive display modes
Flexible case design offers three mounting options
Fully programmable legends and adjustable alarm functions can be customized to fit every boat
Incuded in retail packaging head unit, surface mount bezel, surface mount gasket,
DC Current Shunt 8255, AC Current Transformer 8256, Battery Temperature Sensor 1820,
connectors, and mounting screws
Nominal DC Voltage
12 or 24 Volts
Operating Voltage
8.5–33.0 Volts
Nominal AC Voltage
120 Volts 60 Hz, 240 Volts 60 Hz,
230 Volts 50 Hz
Operating AC Voltage
0–300 Volts
BSS1801
BSS1810
BSS1811
BSS1820
Systems Monitor
Tank Sender, Diesel, Water, or Waste Tank Level
Tank Sender, Gasoline Tank Level
Battery Temperature Sensor
PRECISION BATTERY MONITOR
Theessentialfunctionofabatterymonitoristocalculateampere-hoursconsumedandthestateofchargeofabattery.Ampere-hoursconsumed
arecalculatedbyintegratingthecurrentflowinginoroutofthebattery.AllVictronbatterymonitorsarebasedonapowerfulmicroprocessor,
programmedwiththealgorithmsneededforprecisionmonitoring.
Comescompletewith500Ashunt,10meterRJ12UTPcable,
2meterbatterycablewithfuse&squareandroundmountingbezels.
• Batteryvoltage(V)9-90VDC
• Batterycharge/dischargecurrent(A).
• Ampere-hoursconsumed(Ah).
• Stateofcharge(%).
• Timetogoatthecurrentrateofdischarge.
• Visualandaudiblealarm:over-andundervoltage&batterydischarged.
• Programmablealarmorgeneratorstartrelay.
BAM001004000
BAM001004200
Singlebank
Singlebank+Voltageofsecondbank
LINKPRO BATTERY MONITOR
LINKLITE BATTERY MONITOR
TheLinkLITEbatterymonitorcanmeasurecurrentsupto
1,000Amps.Itselectivelydisplaysvoltage,chargeanddischarge
current,consumedamphoursandremainingbatterycapacity.Itis
equippedwithaninternalprogrammablealarmrelay,toruna
generatorwhenneededortoturnoffdeviceswhenthebattery
voltageexceedsprogrammableboundaries.
• Readyourbatterybanklikeafuelgauge
• Providescriticalinformationaboutthestatusofyourbatterybank
• Displaysvoltage,current,consumedamphoursandremaining
batterycapacity
• Secondarybatterybankvoltagemonitoring
• Autosensingbatteryvoltageinputs
• LargebacklitLCDDisplay
• Quicknutmountingconstruction
• Programmablealarmrelay
• Splashprooffrontpanel
• 500Ampshuntincluded
• CEande-markcertified
Mountsina2"hole,bezelis2-1/2",3-1/8"deep
84-2030-00
854-2021-01
Connection kit 50
TheLinkPROcanmeasurecurrentsupto10,000Amps.Itselectively
displaysvoltage,chargeanddischargecurrent,consumedamphours,
remainingbatterycapacityandthetimeremainingofyourbatterybank.
Itisequippedwithaninternalprogrammablealarmrelay,toruna
generatorwhenneededortoturnoffdeviceswhenthebatteryvoltage
exceedsprogrammableboundaries.
• Secondarybatterybankvoltagemonitoring
• Readyourbatterybanklikeafuelgauge
• Providescriticalinformationaboutthestatusofyourbatterybank
• Displaysvoltage,current,consumedamphoursandremainingbattery
capacity
• Autosensingbatteryvoltageinputs
• LargebacklitLCDDisplay
• Quicknutmountingconstruction
• Programmablealarmrelay
• Splashprooffrontpanel
• 500Ampshuntincluded
• Displaystimeremaining
• Communication/expansionport
• Storeshistoryininternalmemory
• Advancedprogrammablealarmrelay
• Batterytemperaturesensorinput
Mountsina2"hole,bezelis2-1/2",3-1/8"deep
84-2031-00
854-2019-01
854-2021-01
854-2022-01
LinkPro monitor
Data link kit
Connection kit 50
Temperature sense kit 32
Electrical
215
AC VOLTMETER - ANALOG
150 volt dial marked in 5 volt increments only 9353/8244
Simple 2-wire connection to AC hot and neutral
Meter senses and powers from same connection
250 volt dial marked in 5 volt increments only 9354/8245
Accuracy 3 of scale
DC AMMETERS - ANALOG
Simple 2-wire connection from shunt - no other power required
Meter senses and powers from shunt connection
Packaged complete with shunt Except 8005 with internal shunt
Shunt Type
50 Millivolt at meter full scale amperage
Amperage Draw 1 Milliampere
Accuracy
3 of scale range
BSS8038
BSS8041
BSS8005
BSS8022
BSS8016
BSS8017
BSS8018
Description
Shunt
Face Size
Ammeter 0-15A DC
Internal
2
Ammeter
Shunt 0-50A DC
External
2
Ammeter
Shunt 0-25A DC
Internal
2-3/4
Ammeter
Shunt 0-50A DC
External
2-3/4
Ammeter
Shunt 0-75A DC
External
2-3/4
Ammeter
Shunt 0-100A DC
External
2-3/4
Ammeter
Shunt 0-150A DC
External
2-3/4
Face Size
2
Analog 0-250 VAC
2
Analog 0-150 VAC
2-3/4
Analog 0-250 VAC
2-3/4
12VDC
3 position switch for multiple battery banks
Full size 2-3/4 meter
Voltage
12 volts DC
Dimensions 3.75 H x 6.25 W
50 amp dial marked in 2 amp increments
Simple 2-wire connection
Meter senses and powers from coil slipped over
wire to be measured
Includes current transformer
Accuracy 3 of scale
Meter operating amperage 60 milliamperes AC
Description
Face Size
Ammeter 0-50A AC
Ammeter 0-50A AC
2
2-3/4
BSS8015
METER MOUNTING PANELS
Flush mounts Blue Sea Systems Meters
Panel material .125 Aluminium 5052 Alloy
Undercoating Chemical Treatment Mil-C-5541C or equivalent
Panel front coating 2-part Polyurethane Slate Gray
ZERO CENTRE
AC AMMETERS - ANALOG
Meters read both discharge and charge current
Simple 2-wire connection from shunt
Meter senses and powers from shunt connection
Packaged complete with shunt
50 millivolt at meter full scale shunt
1 milliampere Meter operating amperage
Accuracy 3 of scale range
BSS8253
Description
Analog 0-150 VAC
DC VOLTMETER PANEL - ANALOG
AC ANALOG AMMETER
BSS8246
BSS9630
BSS8244
BSS8245
BSS9353
BSS9354
BSS8013
BSS8014
Description
Shunt
Face Size
Ammeter 100-0-100 Amps
External
2-3/4
Single 2-3/4 Meter 3-3/4 H x 5-1/4 W
Double 2-3/4 Meter 7-1/2 H x 5-1/4 W
BATTERY MONITOR
DC VOLTMETER - ANALOG
Displays to .2 Volt
Simple 2-wire connection
8 to 16 Volt DC scale range
Amperage Draw 1 Milliamperes
Input Voltage
8-16 Volts DC
Accuracy
3 of scale range
BSS8028
BSS8243
BSS8003
BSS8240
This panel features an expanded scale, simplified colour band
meter to show accurate battery condition of two separate batteries.
Operation is controlled by a 3-position rocker switch, allowing
independent testing of either battery. Comes complete with
instructions and basic mounting hardware. 3-3/4 H x 5-1/4 W.
423112
Description
Face Size
Voltmeter 8-16 VDC
2
Voltmeter 18-32 VDC
2
Voltmeter 8-16 VDC
2-3/4
Voltmeter 18-32 VDC
2-3/4
BATTERY TEST SWITCH
Stamped anodized aluminium.
422020
2-1/2 H, 3-1/4 W
216
Electrical
BLUE SEA DIGITAL METERS
Allows easy monitoring of key AC and or DC functions.
Large, 9 16 bright LED characters - readable in low light
Three levels of brightness
Splash-proof case
Easy to surface mount in a 2 round hole
Direct replacement for standard size analog meters
Scan mode on multi-function units
Low current drain
Sleep mode on all units for power conservation
Accuracy Greater than 0.5
Height 2.43 Width 2.90 Depth 3.40
DC DIGITAL AMMETER
Displays amperage from -500 to 500 Amps.
Includes 500 amp shunt
Input voltage 7-60 VDC
BSS8236
AC DIGITAL MULTIMETER WITH ALARM
AC DIGITAL AMMETER
Displays amperage from 0 to 150 Amps
Includes current transformer
Input voltage 80-270 Volts AC
BSS8238
Displays amperage from 0 to 150 Amps
Displays voltage from 80 to 270 Volts
Displays power from 0 to 35 Kilowatts
Displays frequency from 40 to 90 Hertz
High and low voltage and high amperage alarms, both audio and
visual
BSS8247
AC DIGITAL VOLTMETER
Displays voltage from 80 to 270 Volts
BSS8237
DC DIGITAL MULTIMETER WITH ALARM
Displays amperage from -500 to 500 Amps
Displays voltage from 0 to 60 Volts in 0.01 Volt increments
High and low voltage, audio and visual alarms
Standard meter operates in negative side of circuit only. Shunt
Shifter required for positive side installation such as alternators
DC DIGITAL VOLTMETER
BSS8248
Displays voltage from 0 to 60 Volts
BSS8235
BSS8251 With alarm
AC DIGITAL FREQUENCY
Displays frequency from 40 to 90 Hertz
Input voltage 80-270 Volts AC
BSS8239
DC DIGITAL VOLTMETER PANEL
Displays voltage from 0 to 60 Volts.
3 position switch for multiple battery banks
3.75 H x 5.25 W, Blue Sea 8235 meter installed
BSS8051
Electrical
BATTERY BOXES
Made of rigid black polypropylene with hold-down strap and
mounting hardware. Impervious to battery acids. Vented.
Battery Inside Dimensions
COMMERCIAL BATTERY BOXES
Rotationally molded from a low density polyethylene plastic.
These rugged boxes maintain their tough impact properties in
climates down to -40 F -40 C . Features a four-corner fastening
system, a captive lid, large cable entry holes and a large electrolyte
reservoir.
Battery Group
Inside Dimensions
HM408
HM484
HM426
4D
20.5”L x 9.5”W x 11.5”H
8D
21.5”L x 11.5”W x 11”H
Dual 6V
14.75”L x 10.75”W x 12”H
9065
9067-1
9082-1
9084-1
24/24M 11-1/8 L x 7-3/4 W x 10-1/8 H
27/27M 13-7/8 L x 7-1/4 W x 10-1/2 H
16
8-1/4 L x 5-1/2 W x 7-7/8 H
30/31
15-7/8 L x 7-1/8 W x 9-3/4 H
VENTED BATTERY BOX
Injection Molded Polypropylene.
For 27 series batteries.
415027
BATTERY HOLD-DOWN TRAY
BATTERY BOXES
Manufactured from injection molded polypropylene plastic that
effectively collects electrolyte, allows ventilation and prevents
accidental contact of battery terminals. Complete with strap & hold
downs.
Battery Group
Inside Dimensions
HM082
U1
11”L x 7.5”W x 8.75”H
HM300BK 24
11”L x 7.87”W x 9.75”H
HM327BK 27
13.37”L x 7.75”W x 10.75”H
HM318BK 24-31
14.5”L x 7.87”W x 9.75”H
Also usable with selected smaller sizes.
Battery Group
9090-5 24 / 24M
9091-5 27 / 27M &Gould 800 & Delco Voyager
BATTERY TRAYS
Non-corrosive hi-strength plastic construction.
Self locking security knobs. Easy to install.
042215 24 series
042216 27 / 30 series
BATTERY TRAY WITH STRAP
Injection molded polypropylene.
Battery Group
415044
415047
24 Series
27 Series
INJECTION MOLDED BATTERY BOXES
Non-corrosive high-strength plastic construction.
Complete with hold-down strap and mounting hardware.
Battery Group
Inside Dimensions
042213
042214
24
11.13 L x 7.75 W x 10.13 H
27, 30, 31
13.44 L x 7.25 W x 10.5 H
BATTERY BOX STRAP
AND BRACKETS
Woven polypropylene / nylon brackets.
415092
415094
38
54
HEAVY DUTY
BATTERY BOX STRAP
BATTERY BOXES
Lightweight, heavy duty corrosion-resistant polypropylene boxes.
includes lift-off lid, durable woven hold-down strap, foot clamps and
stainless steel screws.
Battery Group Inside Dimensions
CAM55362 24
11.33”L x 7.84”W x 9.9”H
CAM55372 27
13.87”L x 7.87”W x 10.9”H
Woven polypropylene
brass chrome plated brackets. 48 .
415082
BATTERY BOX STRAPS
9013-3
9014-3
38 strap with screws & plastic brackets
38 strap only
217
218
Electrical
POWER SOCKET 12V
Ideal for additional power outlets. Both models have
a stainless 304 mounting plate. Chrome steel sockets
should only be used on fresh water boats. Stamped
304 stainless mounting plate.
12 VOLT SOCKET-PLUG SYSTEM
Large contact surfaces for good electrical connection
Twist lock system - plug locks securely into socket
Corrosion-resistant materials for solid contact & low voltage drop
Maximum voltage
15 VDC
Maximum socket amperage 15 Amperes DC
Maximum plug amperage 10 Amperes DC
BSS1010
BSS1011
BSS1014
BSS1015
Plug
Socket
Mounting bracket for socket
Plug and socket set
426013
426053
Chrome steel with molded cap
Stainless steel with molded cap
12 VOLT DC RECEPTACLE
Metal mounting bracket included. Stainless
steel front plate.
F12VR
CIGARETTE LIGHTER / CHART LIGHT
SEALINK DELUXE
12V RECEPTACLES & PLUGS
Watertight sealing cap receptacles /
Moisture proof sealing ring plug
Receptacles supplied with mounting plate for front panel installation,
or locking ring for rear access installation
Receptacles Plugs compatible with standard 12V receptacles / plugs
SeaLink locking system
Plugs have LED power indicator light
Plugs have an Interchangeable fuse
12VRCW
12VRC
12VPG
12VPK
White receptacle
Black receptacle
Plug
Receptacle and plug packaged together
Combination chart light and cigarette lighter with the flick of
a switch. Both models come with a stainless 304 mounting
plate. Chrome steel sockets should only be used on fresh
water boats.
426312
426352
Chrome steel socket & lighter
Stainless steel socket & lighter
DUAL POWER SOCKET - FIXED
Stamped brass/plastic. Allows two separate 12V
devices to be operated at the same time using a
power socket or cigarette lighter. Has internal 5 amp
fuse. LED indicator light.
426130
DELUXE POWER SOCKET 12V
Stamped brass/injection molded nylon and ABS.
Plug includes LED light to indicate when powered.
426115
426116
426118
426117
Socket and cap
Socket, cap and plug
Plug only
Cap only
POWER SOCKET 12V
Maximum Rating 24 volts, 16 amps. Stamped
brass/injection molded nylon & ABS.
426113
426114
426113-7
Socket & cap
Plug only
Strip display 426113 x 10 pc
12 VOLT DC TRIPLE ADAPTER
The triple adapter plugs into your 12 volt power
receptacle and turns your power source into a triple
receptacle. Convenient 90 swivel plug. Powersmart
LED feature gives clear indication when power is
present.
F12PTR
DUAL OUTLET
POWER SOCKET RECEPTACLE
The Dual Outlet Cord allows two separate 12 volt
devices to be operated at the same time using a
power socket or cigarette lighter. 14 long.
426412
Electrical
12 VOLT DC Y ADAPTER
Furrion s Y adapter plugs into 12V power
receptacle and instantly double outlet
source. The powersmart LED feature gives
clear indication when power is present at
the plug.
219
SEALINK RECEPTACLE
WITH ALLIGATOR CLIPS
Accepts SeaLink plug or any
standard 12 Volt plug. 6
12VXC
F12PTWRY
SEALINK
12V DUAL 1 OUTLET CORD
Heavy duty cable with watertight cap, LED
indicator light & built-in 10A
12VAD
POWER SOCKET
WITH BATTERY CLIPS
The Battery Clip Adapter allows the use of 12
volt power accessories on small boats without
a built in power socket. 6 feet long.
426450
12 VOLT DC COILED
6 CORDSET
This 6 coiled extension cord plugs
into your 12 volt receptacle. The
powersmart LED feature gives
clear indication when power is
present at the plug.
F12P6CE
SEALINK
12 VOLT EXTENSION CORD
Heavy duty cable with watertight cap, LED
indicator light & built-in 10A fuse. 6 .
12VXT
12 VOLT DC RECEPTACLE
W/BATTERY CLAMPS
Furrion s 12V battery clamp product provides
power outlet by clamping to your 12V battery
posts.
F12RB
2-WIRE CONNECTPRO
Works with 12, 24, or 36 Volt 2-wire systems
For front mount panel installations
Weather resistant sealing cap
Drain holes in receptacle
Perma-Lock screw terminals will not loosen under extreme hull
vibration
Fits standard 1-1/8” diameter mounting hole
O-ring seal for waterproof connections
Corrosion resistant, plated brass electrical components
Ergonomic contoured grip for easy hook-up and blade alignment
12VBRS2
12VBPS2
12VCPS2
Receptacle
Plug
Plug & Receptacle
2 POLE CONNECTORS
High strength plastic/brass or chrome plated. Plug Rating
24VDC maximum, 12 amps Socket Rating 12VDC, 18 amps.
87136 Plug
80124 Socket, surface mont
220
Electrical
TROLLING MOTOR
RECEPTACLE AND PLUG
Injection molded PVC. 12V, 10 gauge leads.
426183
426184
Receptacle, 3 pin
Plug
POLARIZED
CABLE OUTLET
As a safety feature, polarized pins are sized to be connected
in only one way. Machined brass chrome plated. 12V
426142
426143
426144
2 Pin complete
Deck outlet & cap only
Plug only
3-WIRE CONNECTPRO
Universal 2 or 3-wire for 12, 24, 12/24, 24/36 or 36 volt systems
Watertight sealing cap
Corrosion resistant, plated brass electrical components
Drain holes in receptacle
Standard 1-1/8” diameter mounting hole
Mounting plate for front panel installation,
Perma-Lock screw terminals will not loosen with hull vibration
Accepts 10 and 8 gauge wire
Easily replaces other trolling motor plugs and receptacles
O-ring seal for waterproof connections
Ergonomic contoured grip for easy hook-up and blade alignment
12VBR
12VBP
12VCP
Receptacle
Plug
Receptacle and plug packaged together
POLARIZED
ELECTRICAL CONNECTOR
As a safety feature, polarized pins are sized to be connected in
only one way. Machined brass/chrome plated.
426262
426263
426264
2 Pin
3 Pin
4 Pin
POLARIZED
ELECTRICAL CONNECTORS
As a safety feature, polarized pins are sized to be connected in only
one way. Machined brass/injection molded thermo plastic. 5 amp
426234
4 Pin
TROLLING/CHARGING SYSTEM
The 4-wire Trolling/Charging System eliminates the need for a
charge/run switch. Install the receptacle on the boat, mount the
black trolling motor plug on the trolling motor, and the red charger
plug on the leads of the battery charger. Simply plug in the black
plug to troll, or plug in the red plug to charge.
2018BP-12
2018BP-24
2018BR
12V Charger Plug
12/24V Trolling Motor Plug
Receptacle & Bracket
POLARIZED MOLDED
ELECTRICAL CONNECTOR
As a safety feature, polarized pins are sized to be connected in only
one way. Machined brass/molded bakelite and neoprene.
426162
426163
426164
2 Pin
3 Pin
4 Pin
Electrical
▼
A P
DUPLEX GFCI RECEPTACLES
15AMP/125V
STRAIGHT BLADE
PLUGS & CONNECTORS
F15MLP-SY
F15FMP-SY
15A, 125V, with Ground fault circuit interrupter
GFCI . Includes cover plate & screws.
1591-FIWHT
1591FI
15A Male
15/20A Female
15AMP/125V STRAIGHT BLADE
PLUGS & CONNECTORS
5266CR
5269CR
6017Y
6018Y
15A Male plug
15/20A Female connector
Cover for 5266CR
Cover for 5269CR
15AMP
EXTENSION CORDSETS
DUPLEX
GFCI RECEPTACLES
15A, 125V, with Ground fault circuit interrupter
GFCI Includes cover plate & screws.
HBLGFR5252MW
HBLGFR5252MI
HBLGFR5252MGY
4721CR
4731CR
White
Ivory
Gray
Male plug
Female connector
50 yellow
15 AMP/125V LOCKING
DUPLEX RECEPTACLE
ON-BOARD
CHARGER INLET
For permanently installed chargers.
15A, 125V straight blade inlet
Can be mounted almost anywhere on a boat
Perma-Lock terminals and colour coded wire holes
UV resistant housing and cap
150BBI Black
150BBIW White
4700CR
15 AMP / 125V LOCKING
FLANGED OUTLET
4715CR
▼
20 AMP STRAIGHT BLADE
CONNECTORS AND PLUGS
5366CR
5369CR
6017Y
6018Y
White
Ivory
15 AMP/125V LOCKING
PLUGS & CONNECTORS
Plugs designed with side grips for easy,
user friendly connection
Universal fit with all other brands
Heavy duty industrial quality
FP15EX-SY
SH RE P WER PR DUCTS
Male plug
Female connector
Cover for 5366CR
Cover for 5369CR
A P
Flanged outlet, female
SH RE P WER PR DUCTS
20 AMP LOCKING
CONNECTORS AND PLUGS
205CRPN
205CRCN
102N
103RN
103ELN
Male plug
Female connector
Cover for 205CRPN
Cover for 205CRCN, with threaded ring
Cover for 205CRCN, with easy lock ring
20 AMP LOCKING
CONNECTORS AND PLUGS
F20MLP-SY
F20FMP-SY
Male plug
Female connector
20 AMP LOCKING RECEPTACLE
205CRR
221
222
Electrical
▼
A P
SH RE P WER PR DUCTS
SEALING COLLARS & RINGS FOR
For 30A products
30 AMP/125V
LOCKING CONNECTORS AND PLUGS
F30MLP-SY
F30FMP-SY
Male plug
100EL
100R
110R
Easy Lock Ring not for use with 110R
Threaded Ring
Sealing Collar W/ Threaded Ring
Female connector
WEATHERPROOF COVERS
F30COV-SY
F30COV-SS
F30CVL-SY
F30CVL-SS
Cover F30MLP-SY male, yellow
Cover F30MLP-SY male, titanium
Cover F30FMP-SY female, yellow
Cover F30FMP-SY female, titanium
SEALING COLLARS & RINGS
F30RNG-SS
F30SLC-SS
30Amp replacement ring
30Amp seal collar system
30 AMP/125V
LOCKING RECEPTACLE
Dockside.
HBL305CRR
30 AMP/125V
LOCKING CONNECTORS AND
PLUGS
HBL305CRP
HBL305CRC
Male plug
Female connector
WEATHERPROOF COVERS
HBL102
HBL103R
Cover for HBL305CRPN
30 AMP/125V
LOCKING RECEPTACLES
Dockside.
305CRR
305CRRB
Receptacle, yellow
Receptacle, black
Cover for HBL305CRCN
30A / 125V
LOCKING CONNECTORS AND PLUGS
YELLOW NYLON
305CRPN
305CRPN.VPK
305CRCN
305CRCN.VPK
Male plug
Male plug 305CRPN & 102N cover
Female connector
Female plug 305CRCN & 103RN cover
BLACK NYLON short housing
305BP
305BC
Male plug, black
Female connector, black
WEATHERPROOF COVERS
102N
103RN
103ELN
Cover for 305CRPN
Cover for 305CRCN, with threaded ring
Cover for 305CRCN, with easylock ring
30AMP POWERSMART
CORDSETS WITH LED
LED light indicates power is present at the cable. Plug end has
side grips for easy, user friendly connection. Universal fit with all
other brands. Made to the highest quality standards for long life use
backed by Furrion’s 5 year warranty.
F30C12-SY
F30C12-SS
F30P25-SY
F30P50-SY
F30P50-SS
12 Yellow, with LED
12 Titanium, with LED
25 Yellow, with LED
50 Yellow, with LED
50 Titanium, with LED
Electrical
▼
A P
SH RE P WER PR DUCTS
30AMP INLETS WITH LED
30AMP CORDSETS
Plug end has side grips for easy, user friendly connection.
Universal fit with all other brands. Made to the highest quality
standards for long life use backed by Furrion’s 5 year warranty.
F30C25-SY
F30C25-SS
F30C50-SY
F30C50-SS
25ft Yellow
25ft Titanium
LED light indicating power present
Furrion’s Sleek, modern design
Universal fit for industry standards
Back covers included
Nickel coated brass connections for corrosion resistance
F30INR-PS
F30INS-PS
Round, white with LED
Square, white with LED
50ft Yellow
50ft Titanium
30AMP STAINLESS INLETS
30 AMP SHORE POWER CABLE SETS
Vinyl jacketed shore power cable set. 10AWG wire with molded-on
connectors. Non-metalic threaded sealing ring to make connection
watertight.
HBL61CM03
HBL61CM05
HBL61CM05W
HBL61CM08
HBL61CM08W
Round, Stainless steel
35 Yellow
35 White
50 Yellow
50 White
LED Power indicator light glows
red when there is power present
Contour grip with thumbprint locator
Corrosion resistant nickel plated contacts
Super flexible heavy duty 10/3 Cable
Easy Lock system quickly locks the
cordset to the inlet
Includes threaded ring and easy Lock ring
50 Yellow
50 White
30A SHOREPOWER INLET
UV-resistant, weatherproof non-Metallic
shore Power inlet. Easy-to-Wire
terminations. Transparent interior for easy
inspection. 2-3/8 on centers mounting
holes match existing Mounting patterns.
Includes Mounting screws, gasket,
protective Rear enclosure/strain relief.
HBL303NMBL
F30INS-SS
25 Yellow
POWERCORD PLUS
30 AMP CORDSETS
MAR199119
MAR199120
Furrion’s Sleek, modern design
Universal fit for industry standards
Back covers included
Nickel coated brass connections for corrosion resistance
STANDARD INLET
Marine grade UV stabilized construction
Easy lock system
Watertight cap
4-way right angle rear safety enclosure
Stainless steel trim
301EL-B
305CRMB
Replacement electrical interior
CONTOURED INLET
Marine grade UV stabilized construction
Easy lock system
Cap stays open in the upright position
8-way right angle rear safety enclosure
Stainless steel trim
304EL-B
304EL-BCR
305CRMB
White
Chrome
Replacement electrical interior
STAINLESS STEEL INLET
Solid cast 316 stainless steel
Locking waterproof cap
Easy lock system
Cap stays open in the upright position
4-way right angle rear safety enclosure
303SSEL-B
305CRMB Replacement electrical interior
223
224
Electrical
▼
A P SH RE P WER PR DUCTS
50AMP LOCKING
CONNECTORS AND PLUGS
F50MLP-SS
F50FMP-SS
F52MLP-SS
F52FMP-SS
125V Male plug
125V Female connector
125/250V Male plug
125/250V Female connector
WEATHERPROOF COVERS
F50COV-SY
F50CVL-SY
Cover for Male, yellow
Cover for Female, yellow
50AMP LOCKING
CONNECTORS AND PLUGS
6361CRN
6360CRN
6365CRN
6364CRN
125V Male plug
125V Female connector
125/250V Male plug
125/250V Female connector
WEATHERPROOF COVERS
7715CRN
7715ELN
7717N
Cover for Female, with threaded ring
Cover for Female, with Easy Lock ring
Cover for Male
50AMP LOCKING RECEPTACLE
6370CR
6369CR
50AMP INLETS WITH LED
LED light indicating power present
Furrion’s Sleek, modern design
Universal fit for industry standards
Back covers included
Nickel coated brass connections for corrosion resistance
F50INR-PS
F50INS-PS
F52INR-PS
F52INS-PS
125V, Round, white with LED
125V, Square, white with LED
125/250V, Round, white with LED
125/250V, Square, white with LED
50AMP
STAINLESS INLETS
Furrion’s Sleek, modern design
Universal fit for industry standards
Back covers included
Nickel coated brass connections for corrosion resistance
F50INS-SS
F52INS-SS
125V Round, Stainless steel
125/250V Round, Stainless steel
STANDARD INLET
Marine grade UV stabilized construction
Easy lock system with watertight cap
Rear safety enclosure with strain relief
Marine stainless steel trim
6351EL-B
6353EL-B
125V
125/250V
125V Receptacle, black
125/250V Receptacle, black
50AMP CONTOURED INLET
Marine grade UV stabilized construction
Easy Lock system
Cap stays open in the upright position
Rear safety enclosure
Stainless steel trim
6343EL-B
6344EL-B
125V
125/250V
50AMP STAINLESS STEEL INLET
Solid cast 316 stainless steel
Easy Lock system
Cap stays open in the upright position
Rear safety enclosure with strain relief
Locking waterproof cap
6371EL-B
6373EL-B
125V
125/250V
50AMP SEALING COLLAR
WITH RING
510R
50AMP LOADSMART CORDSETS
Furrion s unique Loadsmart system features a series of green and
red LED indication lights that illuminate and indicate power present
and total current available and more. Plug end has side grips for
easy, user friendly connection. Universal fit with all other brands.
Made to the highest quality standards for long life use backed by
Furrion’s 5 year warranty.
F50150-SY
F50250-SY
125V, 50 Yellow
125/250V, 50 Yellow
50AMP POWERCORD PLUS
CORDSETS
6 gauge 3 conductor flexible cable with
molded ends and an LED light on female
connector. 5 year warranty.
6153SPP 125V, 50 Yellow
6152SPP 125/250V, 50 Yellow
Electrical
MALE PLUG
FEMALE CONNECTOR
Attaches to dockside
▼ SH
RE P WER ADAPTERS
receptacle
or cordset
Attaches to boat inlet
or cordset
G
RIGHT ANGLE CORDSET ADAPTER
G
PLUG 30A or 50A power cord from a straight connection into a right angle connection, provides
ConvertsMALE
your existing
Attaches
toprotrusion
dockside from inlet for more clearance in tight spaces. GripLock handle design for easy hook-up.
minimal
cordset
W
W
receptacle or cordset
1RPC
30 A/125V
1RPC50 50A 125/250V
G
E CONNECTOR
es to boat inlet
r cordset
G
G
MALE PLUG
FEMALE CONNECTORW
to boat inlet
PIGTAIL Attaches
ADAPTERS
Attaches to dockside
receptacle
or cordset
orfrom
cordset
Allow
you
to
connect
one
dockside
receptacle
or other
power source receptacle to one boatside inlet or equipment of dissimilar power
W
W
MALE PLUG
LE CONNECTOR
configuration.
These
adapters
are
fully
molded
and
Wequipped with a sealing collar where indicated and covers for use in wet locations.
W
Attaches to dockside
hes to boat inlet
MALE PLUG
EorCONNECTOR
G
G
receptacle
or cordset
cordset G
G
PIGTAIL SHORE POWER ADAPTERS
Attaches
Dock
Sideto dockside Boat Side
G
es to boat inlet
W
receptacle
or
cordset
or
cordset
MALE
15A
Male PLUG
30A Female
Description
E CONNECTOR
Marinco
Furrion
Hubbell
W
Attaches
to dockside
W
es to boat inletG
G
W
W
MALE
PLUG
FEMALE
CONNECTOR
15A 125V
Straight
receptacle
or cordset
r cordset
G
NEMA
G
Attaches
to dockside
W
Attaches
to boat
inlet 30A 125V blade
W
M to 30A
G
G
L5-30R
Locking
HBL104
FP3015-SY Yellow
receptacle
125V
Locking For cordset
or cordset G
MALE PLUG
GW
E CONNECTORWG
MALE
PLUG
104A
FEMALE
CONNECTOR
HBL61CM22
FP3015-SS
Titanium
Attaches
to dockside
es to boat inlet
G
MALEtoPLUG
W
FEMALE
CONNECTOR
Attaches
dockside
Attaches
to boat
inlet
Description
30A Male
15A
Female
Marinco
Furrion
Hubbell
W receptacle
or cordset
or cordset G GW
Attaches
dockside
Attaches
to boatW inlet G
W to
receptacle
or
cordset
MALE
PLUG
orCONNECTOR
cordset
G
G
G
MALE
PLUGW FEMALEor
W
R
receptacle
cordset
Attaches
to or
dockside
30A 125VLocking
Attaches cordset
to boat inlet
G W W to dockside
W
Attaches
W
W
G
M to 15A
125V
NEMA G
30A 125V
receptacle
or cordset
or
cordset
FP1530-SY Yellow
G
receptacle or cordset
L5-30R
Locking
G
G
E CONNECTOR
W
W
G
G
W
W
G
G
NEMA G
L5-30R X
NEMA G W
W L5-30R
30A 125VW
W GLocking
W
W
30A
G 125V
Locking
G
G
W
W
W
W
W
G Straight
blade
W
W
G
F
W
G
G
30A 125V
G
30A
Female
G
GG
Y
Y
Locking
XG
GX
Description
W
G
W
G
W
30A 125V
Locking
30A 125V
Locking
30A
125V
Locking
W
W
W
W
G
G
G
W
W
W
W
X
X
W
W
Y
G
W
G
W
G
X
W
Description
G
Y
30A 125V
Locking
30A 125V
Locking
50A 125/250V
W
locking MG to 30A
125V locking
F
G
Description
G
G
X
FP5030-SY Yellow
HBL61CM56
Hubbell
Marinco
Furrion
Hubbell
Marinco
Furrion
Hubbell
X
W
W
X
Y
X
117A
Y
W
Marinco
FP5530-SY Yellow
Furrion
Hubbell
FP5550-SY Yellow
Marinco
Furrion
Hubbell
FP3055-SY Yellow
121A
Marinco
Furrion
HBL61CM71
Hubbell
W
50A 125/250V
W
M to 50A
125V locking F
G locking
X
X
HBL61CM55
Furrion
W
G
W
FP3050-SY Yellow
X
Description
50A 125V Female
W
Marinco
50A 125VX locking
M Wto 50A
G125/250V locking
X
G
Y
W WF
118A
W
Y
Hubbell
Y
GG
W
Furrion
X
Description
125VX locking
X
Y M to 50A
W
125/250V
locking
G
W
F
G
G
30A Female
X
W
Y
G
G
G
W
Hubbell
114A
Y
Y
Y
NEMA
XG
Y
L5-30R
XG
NEMA
Y
L5-30R
WW
Y
G
G
W 30A
W
G
Y
W
W
to
50A
125/250V
G
W
G G locking
W
F
W
G G
X
W
W
W
W
G
W
W
Y
Y G
G
G
Y
X
HBL61CM25
W
W
Y
receptacle
cordset
Attaches
toor
dockside
G
50A
125/250V
X
Y
Y
W
receptacle
or
cordset
Straight
blade M
G
Y
G
Y
G
30A 125V
Locking
W
50A 125/250V Male
X
110A
W
50A 125/250VW Female
X Male
50AY 125/250V
GY
G
G
W
W
G
Y
W
X X
Y
G
Hubbell
X
Y
30A 125VW locking
X
Y
125V
W M to 50A
W
Wlocking F
GW G
W
GX
Y
G
50A 125/250V
Female
50A 125V Male
G
Y
X
X
Male
G
W G
W G
G W
30A 125V
Locking
X
W
G
W G
WW
W
NEMA W G
L5-30R
G
G
W
G
W
W
G
G
G
Y
W G
W
W
W
W X
Y
Y 30A
Y
W
W
W G
W
or cordsetX
W
G
G
G
G
G
G
X
or cordset
X Xinlet
Attaches
toY boat
WW W
W
G
G
W
W
XW
Marinco
WG
G
G
W
Furrion
HBL105
W
W
W
W WG
XW
Y
Furrion
FP1520-SY Yellow
W
107A
W
NEMA
GW
30AG125V
X
X
111A
MALE PLUG
Y
FEMALE
CONNECTOR
W Locking
W
L5-30R
NEMA G
30A 125V
G
G
Attaches
toPLUG
dockside
Description
50A125/250V
Male CONNECTOR
125/250V
Female
Attaches
to50A
boat
MALE
FEMALE
Y
X inlet
L5-30R
Locking
X
G
W
G
WG
X
NEMA G
L5-30R
NEMA G
L5-30RG
NEMA
W
L5-30R
W
MALE
PLUG
FP1530-SS Titanium
Attaches
dockside
20A 125Vto
locking
W
M to 15A
125V
receptacle
or
cordset
W
G
WW
G
W
Marinco
Marinco
MALE
PLUG
G
W
G
G
Y
X
G
Y
W
G
G
W W G
G
W
X
G
Attaches
to dockside
W
G
Y
or cordset
W
Y
W
W
W
X
GW
Description
G
G
G
W
W
G
30A
G 125VW receptacle
W
W
Locking
Y
W
NEMA G
L5-30R
W
Attaches
toY boatX inlet
or cordset W W
W
MALE PLUG
NEMA
WMale
MALE
50A125V
Attaches
to PLUG
dockside
G W
L5-30R
MALE
PLUG
Attaches to
receptacle
ordockside
cordset
G
G
G
XG
G
G
W
W
G
G
Y
G
s to boat inlet W
NEMA G
W
cordset
WG
L5-30R
Y
G
GLocking
Y
CONNECTOR
X W WW
W
105AM
106A
W
15A Female
to
G dockside
50A 125V
locking
30A 125V Attaches
receptacle
or cordset
W
W
X
W
G 125V
G
NEMA G
Y
30A 125V
W
M to 30A
receptacle
or
cordset
WW
W W
W
L5-30R
Locking
G
NEMA G W
30A 125V
W
locking WF
G
G
G
G
L5-30R
X
Locking
GY G
W G
G
NEMAY G WX
30A 125V
G
W
Y
X
W
G
G
W
W
G
G
L5-30RW
GLocking G
Description
30A Male
50A125V Female
srto
boatGWinlet
NEMA
cordset
L5-30R W
cordset
X
G
W
W G
W
G
FEMALE CONNECTOR
W
G
G
CONNECTOR W
Es CONNECTOR
to boatGWinlet WW G
G
CONNECTOR
es
to boat inlet
cordset
30A 125V
Locking W
X
Y
G
W
XG
Male
G
G
W G
NEMA G
L5-30R
G
G
G
30A 125V Y20A
W
YLocking
W
blade F
G
Description
20A Male
Y
X Female
to dockside 30A
G
WAttaches
G G
G
MALE PLUG
FEMALE
CONNECTOR
WW
W or cordset
W W
receptacle
WFEMALE
G MALE PLUG
CONNECTOR
G
X
Attaches
to
dockside
Y
Attaches to boat inlet
G
W
locking
W 20A 125V
W W W
G
Attaches
tocordset
dockside
Attaches
to boat
inlet
M to 30AG 125V
or
NEMA
G
30A 125V receptacle
or cordset
W
W
G
Locking
receptacle
orL5-30R
cordset
W
locking F or cordset
W
es to boat inlet WW
G
r cordsetWW G
G
W
GWStraight
G
WG
G
MALE
PLUG
W
Y
Y
G
Y
W
123A
X
Y
W
X
G
W
Y
X
FP5055-SY Yellow
HBL61CM72
225
receptacle or
receptacle
cordset or cordset
or cordset
or cordset
receptacle
or cordset
Electrical
226FEMALE
MALE
FEMALE
MALEPLUG
PLUG
MALEPLUG
PLUG
FEMALECONNECTOR
CONNECTOR
FEMALECONNECTOR
CONNECTOR MALE
W
W
W
MALE
PLUG
MALE
PLUG
GFEMALE CONNECTOR
FEMALE
CONNECTOR
Attaches
toto
Attaches
dockside
totodockside
Attaches
toto
Attaches
boat
inlet
to
inlet
G
G
Gtoboat
G Attaches
Attaches
dockside
dockside
G
Attaches
Attaches
boat
inlet
boat
inlet
Attaches
to
Attaches
dockside
to
dockside
Attaches
to
Attaches
boat
inlet
to
boat
inlet
receptacle
or
receptacle
cordset
ororP
cordset
ororcordset
ororcordset
receptacle
or
receptacle
cordset
▼
SH
RE
WER ADAPTERS
cordset
cordset
receptacle or
receptacle
cordset orcordset
cordset
or cordset or cordset
W
W
W
W
W
W
G
G
G
G
Attaches
todockside
docksidereceptacle
G
G
Let you
split
between
two boatG Ginlets of similar or dissimilar power configurations. Y adapters are fully molded and
G
W one
GG
GG
W
equipped
with
sealing
collar
and
covers
where
indicated for use in wet locations.
receptacle
or
cordset
G
et
G
W G
W
G
W
W
W
WW W
WW
W
W
W Side
W W MALE PLUG
W MALE PLUG
MALE
PLUG CONNECTOR
Dock
SideCONNECTOR
Boat
FEMALE
FEMALE
MALE PLUG
MALE PLUG
FEMALE
CONNECTOR
FEMALE
CONNECTOR
OR
W
G30A 125V G
G30A 125V G
W Locking
W
G
G
▼30A
Male
W
W
W
W
W
GW
G NEMA
G
30A 125V G
WG
W Locking
30A 125V WG
W
G
G
G
W
WX
X
NEMA
G W
W
NEMA G
L5-30R
NEMA G
L5-30R
W
W
W
W
W
W
W
W
NEMA
GG G125V
W 30A
NEMA
30A
125V
WLocking
L5-30R
NEMA
G 125V
30A
L5-30R
Locking
XL5-30RLocking
W
W
X
GY
GY
GX
Y
30A 125V
Y
Locking
G
G
G W
G
W Male
▼50A 125V
W
W
W
Y
▼Marinco
FEMALE CONNECTOR
CONNECTOR
W
FEMALE
W
F3030Y-SY
W
50A
G W125/250V Locking
GW
30A
G 125V
(M)
to 2 xG 30A 125V G
G
GW 30A
125V
W Locking
G
G
30A 125V
Locking
(F)
Locking
G
G
G
R
W X
G Y
Y
W
W
G W
G
G
G
W
W
X
Y
▼50AW 125/250V Female
W
WW
W
W
▼2 x 30A Male
X
W Y
▼Description
Y
FEMALE
CONNECTOR
X PLUG
Y MALE
Y
STRAIGHT
ADAPTERS
X
X
Attaches
inlet
Y
X G
X
Attachestotoboat
dockside
Y
G
TOR
G
20A Female
G15A Male to dockside
Attaches
Attaches
to dockside
W
G
W
receptacle
or
cordset
receptacle
or cordset G
MALE PLUG
G
CTOR
nlet
W
W
FEMALEtoCONNECTOR
Attaches
dockside W
Attaches or
to cordset
boat inlet
receptacle
or cordset
MALE
PLUG
W
GG15A Male
W
W
G
▼Hubbell
F3050Y-SY
X
X
X
Y
▼Marinco
▼Furrion
HBL64CM54
▼Hubbell
162AY
F5050Y-SY
▼Furrion
▼Hubbell
X
Description
G
W
W
FEMALE CONNECTOR
W
G
W
W
W
30A 125V
Locking
20A Male
W
G
GG
30A 125V G
GGG
Attaches to boat inlet
Gor cordset
W
G
G
to dockside Marinco#
W
receptacle
20A 125V Locking MW or cordset
GMALE
W
G
PLUG
to 15-20A
G 125V Sraight
Attaches
Blade Fto dockside
GW
Description
NEMA
G X
WG
X
L5-30R
G
G W
30A 125V
Locking
G
G
W
W Female
30A Male NEMA 15-20A
G
30A 125V
W G
W
L5-30R
Y
Y
G
G
W
GG 125V
30A
Y
Locking
G
W
Y
G
G30A125V
30A
125V G
Locking
GG
Locking
W
W
W
W
GG Y
W
W
GG
WW
W
30A Male
X
G
G
G
G Y
X
Y
X
X
Y
W
W
NEMA G
L5-30R
W XX
WY
W
G
G
W
W
84A
Description
G
W
G
30A 125V Locking M
W
G 125V Sraight
to 15-20A
BladeW F
G
20A
Female
W
WG
W W
WW X
G
Y
G
X
YW
W
W
HBL31CM28
Hubbell#
Marinco#
Furrion#
Hubbell#
X
X
Marinco#
Y
Y
F2030AD-SS
Furrion#
Hubbell#
Locking
G
X
W
Furrion#
Hubbell#
X
X
Y
20A 125VY Locking M
G
Y 125V
30A
Y to 30A 125V Locking F
W
Locking
G
G
W
W
W
G
G
Hubbell#
F2020AD-SS
80A
receptacle or cordset
W
WW
W
Description
Attaches
30A
Female
G
W
Furrion#
F1530AD-SS
MALE 83A
PLUG
W
G
W
Locking
Marinco#
W
W
W
W
15-20A
G 20A Maleto boat
G
Attaches
inletFemale
W
orWcordsetW G
Furrion#
F1520AD-SS
82A
receptacle or cordset
15A
G 125V Straight
G
30A 125V
W 30A
blade M to 30A 125V
G
125V
Locking
Locking Locking F
NEMA
NEMA GG
L5-30R
L5-30R
WW
Marinco#
W
W
15A 125V
Straight
G
MALE
blade GM
to 20APLUG
125V
W
Attaches
to
Locking
F dockside
30A Female
G
W
FEMALE
CONNECTOR
W
G
▼Furrion
▼Marinco
W
W
G
Description
Attaches to docksideW
W
G
receptacle
or cordset
G
G
W
F5052Y-SY
X
▼Marinco
W
W
W
Y Y (M) to 50AY125/250V
Attaches
to dockside
Y
MALE PLUG
R
G
Y
W
X
▼Hubbell
Locking (F)
G in usage to Pigtail adapters.
One-piece
similar
However, they do not have sealing collars and are not recommended for use in
G
G
G cordset
receptacle
or
orW adapters
cordset
XG
X
X
GG W
G WY
MALE
PLUG
Y
or cordset
X
X
wetreceptacle
locations.
Use
onlyYin
Y
G
W an enclosed,
W dryG location.
W
W Y
W
Attaches to dockside W WW
receptacle or cordset
COMPACT one piece SHORE POWER ADAPTERS
Dock
Side PLUG
Boat Side
MALE
nlet
G
Y
W
MALE
PLUG
2 x X30A 125V
LockingX
Y
Y
▼Furrion
152AY
W 125V Locking (M)
W
50A
W
W
to 2 xGG50A 125V
Locking (F)
▼Description
▼Hubbell
154AY
MALE PLUG
PLUG
MALE
G
G G GG
G
HBL64CM56
F3052Y-SY
▼Marinco
W
▼Description
Attaches to
to dockside
dockside
Attaches
receptacle or
or cordset
cordset
receptacle
G
G
▼Furrion
Locking
G
▼Hubbell
153AY
W
W
W
WWW
W
W
W
W
Y
Y Locking (M)X X
50AX125V
X
W
GNEMA G X
Y30A
Gto 2 x X30AY 125V G
Y G 125V
Y 125V
30A
NEMA30A
X
G 125V G
X
G
G
Y Y 125V
Y
NEMA
X NEMA 30A
X
G
GY 125V
30A
Locking
L5-30R
Locking
Locking
Y
Y
Locking (F)
XL5-30R
L5-30R
L5-30RLocking X
G Locking
G
X
G WY
G
GG GW
X
G W Y
G
G W
W
W
X
W
▼50A 125V Male
▼2Wx 50A125V
G Female
G W ▼Description W Y
W
W
W
Attaches to
to boat
boat inlet
inlet
Attaches
or
cordset
or cordset
▼Furrion
▼Marinco
W
X
X G
Y ▼2
W x 30A FemaleW
▼Hubbell
157AY
W
W
W
W
W
W
W 125/250V Locking
W
50A
GG GYG
W XGG Y
WX
GG G W
G G G G Y (M) toW2G xG 50A 125V
W
G Y W
G X
G
G
G (F)
Locking
W
X
▼Furrion
F1530Y-SY
G
▼Description
G
▼Description
X
Y x 50A
▼2
125V Female
W
W
W
W
W
W
W
▼50A 125/250V
Male
W
W
G Wx 30A Female
G WW
W▼2
G
G WW
W W
W
L5-30R Y
G W
G
30A 125V Locking (M)
G
to 2 x 15/20A
125V
Straight blade (F)
W
W
W
W
W
W
W
30A 125V
G
G Locking (M)
G
G
G G
G30A 125V
G 30A
to
2
x
G
G
NEMA
G
125V
30A
125V
G
G
W
W WG G
W
(F)
W
W
L5-30R
Locking W W Locking Locking
G
▼50A 125/250A Male
Y
GG Y
G
G
G
G
WW
▼2
G x 30A Female
G
L5-30R
Locking
G
WGY
GY
GW G
W
W
W G
W
W
G
Locking
G
W
"Y" SHORE POWER ADAPTERS
G
Attaches
toAttaches
dockside
toAttaches
dockside
▼Marinco
▼30A
Male to
▼2
x 15/20A
▼Description
Attaches
boat
boatFemale
inlet
G to
G Attaches
W
docksideto
to dockside
dockside
Attaches
toAttaches
boatinlet
inlet
Gto boat inlet
G Attaches toAttaches
W
W
W
W
G
G
W
W
receptacle
or cordset
receptacle
or
receptacle
cordset
or
cordset
or
or
cordset
W cordset
150AY
receptacle or
receptacle
cordset or cordset
or cordset or cordset
t
W
W
WW
W
MALE PLUG
Y ADAPTERS
G
OR
XG
F3015AD-SS
81A
Description
W
W
W
G
X
30A 125V
M
G Y Locking
X
Y
to 20A 125V Locking F
WG
G
Y
W
W
30A 125V
WW
W Locking
W
Furrion#
W
85AX
G
Marinco#
Y
X
F3020AD-SS
HBL31CM29
Hubbell#
Electrical
227
▼ SH RE P WER ADAPTERS
REVERSE Y ADAPTER
30A TO 15A ADAPTER
WITH GFCI PROTECTION
The reverse “Y” provides 50A 125/250V power when only 30A 125V receptacles
are available. Power isolation circuitry for added safety.
Note Reverse “Y” will NOT work with 50A, 125V, 3-wire inlets. Power is
provided in both circuits to the 4-wire inlet, but the dockside receptacles limit the
current in each circuit to 30A. The two 30A 125V receptacles must be supplied
from a single power source providing from 208V to 250V between them for
proper operation.
Permits use of 15A straight blade plug with
30A 125V locking receptacle and has the
added benefit of GFCI protection ground
fault circuit interrupter
HBL105GF
167RYN2
Environmentally sealed against
humidity, fog and rain.
Cord clamps prevent
strain on terminals.
Sealing grommets
keep moisture out.
UV resistant
high-impact housing.
Safety indicator light.
(When ON, safe operation is indicated).
Fully molded
Hubbell plugs.
30A plugs connect
to 30A shore power.
50A connector
body mates with
boat’s male end
of cordset.
Fully molded Hubbell connector.
INTELLIGENT Y ADAPTER
30A TO 15A ADAPTER
WITH GFCI PROTECTION
Allows you to power domestic 110VAC devices from a 30A
dockside power outlet. It provides a safer hook-up, as well as
a number of safety features, including GFCI protection.
MAR199128
The Hubbell Y-Q 230 shore power adapter powers 50 amp 125/250 volt boat
from 2 30 amp 125 volt receptacles. Y-Q Adapter shuts off the power if an
improper wiring condition exists on the power center or if 1 plug is not fully
engaged. A built-in safety indicator light warns the operator of faulty connections.
Sealed against humidity, fog and rain.
Note The YQ230 Adapter will only work with two 30A receptacles that are on
different circuits.
HBLYQ230
▼ SH RE P WER B
ES C
ERS
ISOLATION TRANSFORMERS
ACESS RIES
Safety and prevention of galvanic corrosion
The isolation transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates
the need for galvanic isolators and polarity alarms. Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or
a GFCI Ground Fault Current Interrupter will trip in case of a short circuit or current leakage to ground. Connecting the ground wire of the
shore-side supply to the metal parts of the boat will result in galvanic corrosion see below . Bringing only the live and neutral wire on board
results in an unsafe situation because GFCI’s will not work nor will a fuse blow in case of a short circuit to a metal part on the boat.
Soft start is a standard feature. It will prevent the shore power fuse from blowing due to the inrush current of the
transformer, which would otherwise occur.
Input and output voltage
Frequency
Rating
Soft start
Transformer type
Input circuit breaker
Dimensions h x w x d , mm
ITR040182040
ITR040362040
2000 Watt
3600 Watt
2000 Watt 1
115 / 230V
50/60Hz
17 / 8,5 A
375x214x110
3600 Watt 1
115 / 230V
50/60Hz
32 / 16 A
Yes
Toroidal low noise, low weight
yes
362 x 258 x 218
228
Electrical
30 AMP POWER OUTLET
STAINLESS STEEL
Female 30A 125V
303SSO
SHORE POWER CLIP
Easy to install and use, the Shore Power
Clip is designed to hold a sturdy 30 amp
marine power cord in its low profile
toe-friendly shape. 4 per bag
DOC91-200-F
SWITCH/OUTLET BOX
Accepts 15A, 20A & 30A receptacles,
telephone outlets and TV coax connectors.
Can be secured against the back of the
wall or the wall facing
3-9/32 Wx 2-3/16 Hx 2-1/2 D
6079
SHORE POWER
CORD CLIPS
For 30A cords. Can be used on tube
or wire rails. 6 per card.
CLIP-01
FS BOX
Black non-metallic with two 3/4
K.O. holes. Will accept all 15A,
20A and 30A receptacles, and
7420CR weatherproof covers.
6080
FD BOX
Yellow fiberglass with two 3/4 K.O.
holes. Will accept all 15A, 20A and
30A receptacles, and 7420CR &
7788CR weatherproof covers.
6083CR
S.S. WEATHERPROOF
COVER WITH LIFT LID
ZIP SLEEVE
Can hold two 30 amp or one 50
amp plus cable TV and telephone
wires. 24 length, with the ability
to join multiple Zipsleeves to
accommodate longer length
cordsets. Velcro straps allow you to
hang Zipsleeve from boat railings
or reverse the Velcro straps to
tightly wrap around your cordsets.
ZIP-01
Fits 4700CR, 5262CRR and 5739CR
duplex receptacles.
SHORE POWER
ORGANIZING BAG
WEATHERPROOF
LIFT COVER PLATE
FORGBG-SS
7879CR
for GFCI duplex receptacles. Durable PVC resists
deterioration & won’t support combustion. Each plate
comes with a tightly sealing, rubberized gasket and a
super-strong lift cover spring.
CWP26CR
Cables entry and exit access holes in
each end of the bag
Ventilation for drying moisture
Heavy duty water resistant material
Reflective edges for easy locating in
dark hard to find places
Gray
FLIP LID COVER
Yellow LEXAN weatherproof cover
with lift lid. Fits 15A, 20A, & 30A
single receptacles.
7420CR
PORTABLE CABLE RAMP
WEATHERPROOF COVER
Yellow LEXAN with lift lid. Fits 50A
receptacles 6369CR and 6370CR.
7788CR
Even with its amazing industrial strength, it is light and packs up into a
small bag for easy storage and portability so you can take it anywhere
for easy setup and long-term use. With its adjustable sizes and the
ability to join several ramps together for a longer protection area,
the ramp provides protection for a wide variety of applications. Light
reflective signs on the surface gives a warning in the night.
Length of ramp 1ft 11 , Material Fibre filled nylon.
FRAMP-SS
Electrical
TELEPHONE
CONNECTORS
FTPCON-SY
Male & Female Yellow
TELEPHONE/TV INLETS
Sleek and has a futuristic look and feel.
On these advanced inlets there is LED
light indicating when line is present.
Universal fit for industry standard.
FPTINR-PS
FPTINS-PS
Round
Square
TELEPHONE
ADAPTER SYSTEM
The telephone adapter system
adapts RJ11 connectors to the
weatherproof telephone adapter
style plugs.
FTPADP-MS
FTPADP-FS
Male
Female
MALE
PHONE ADAPTER
Used to hook-up telephone
to cordset PH6599. No inlet
installation required.
PH6600
TELEPHONE / TV INLET
Watertight. Non-metallic with marine
stainless steel trim. Contains telephone
and cable TV connections.
PH6574TV
TELEPHONE / TV
INLET STAINLESS
316 stainless steel, watertight.
Contains telephone and cable TV
connections. Features Easy Lock
system.
PH6592TV-SS
FEMALE
PHONE ADAPTER
Used to hook-up a locking type
inlet to a modular telephone
connection.
PH6601
ANTI-INTERFERENCE
PHONE CORDSETS
Protects against surges
Reduces interference in voice and fax transmissions
Improves internet speeds by reducing data corruption
Directional arrows on plug indicating correct alignment and side
grips for easy, user friendly connection
Cable comes with water proof storage bag
Universal fit with all other brands
FTPC25-SY
FTPC50-SY
25 yellow
50 yellow
COMBINATION OUTLET
Marina and RV park telephone and cable TV
outlet, black LEXAN . With spring-loaded lift
cover for weatherproof closure when not in
use. Fits FS and FD boxes.
PH6597TV
TELEPHONE INLET
Black LEXAN , glass-filled polycarbonate.
Spring-loaded lift cover for weather-proof
closure when not in use.
Fits FS and FD boxes.
PH6595
TELEPHONE CORDSETS
3 conductor 16SJTO yellow vinyl cord
provides portable telephone connection
for RV and pleasure boats.
PH6599
PHTV6599
50 Phone
50 - Phone & TV
ANTI-INTERFERENCE
TV CORDSET
Inline interference filter
Weatherproof RG59-U connectors
Bonus weatherproof storage bag
FTVC50-SY
50 yellow
TELEPHONE OUTLET
TV CABLE CORDSETS
PH6597
TV99-25
Marina and RV park telephone outlet, black
LEXAN , glass-filled polycarbonate. With springloaded lift cover for weatherproof closure when not
in use. Fits FS and FD boxes.
Standard 75 ohm, RG59-U w/quick,
slip-on connection on both hull inlet
side and dock side. Heavy duty boots
are included on both ends.
25
229
230
Electrical
SAE wire is up to 12 smaller than AWG Boat Cable which means that, in many applications, larger gauge
wire must be used to stay within the voltage drop limits recommended by experts. The wire charts found in
Chapman s Piloting and other publications are all for AWG wire like Ancor, not SAE type wire.
3
VOLTAGE DROP AT 12 VOLTS
Length 5
10 15 20 25
30
40
50
60 70 80 90 100
10’
18 14
10
8 Drop6 at 126 Volts6
6
6
4
4
Conductor
Sizes
AWG12for10
3 Voltage
10 affecting
8
6 or its passengers
4
4 bilge
4 pumps,
2
2
Use 3 15’
voltage drop16
for any12
critical 10
application
the8safety of6the vessel
navigation
etc.
20’lights, electronics,
14 10
10 8
6
6
6
4
4
2
2
2
2
DROP
25’
12 10 8
6
4 3 4 VOLTAGE
4
2
2
2 AT
2 12
1 VOLTS
1
30’
12
10
8
6
6
6
4
4
2
2
2
1
1
Length 5
10 15 20 25
30
40
50
60 70 80 90 100
40’
10
8
6
6
4
4
2
2
1
0
0
2/0
10’
18 14 12 10 10
8
6
6
6
6
6
4
42/0
50’
10
6
6
4
4
2
2
1
0
2/0
3/0
4/0
15’
16 12 10 10 8
8
6
6
4
4
4
2
24/0
60’
10 10
6
6 84
20’
14
10
62
62
61
40
42/0 23/0 23/0 24/0 24/0
70’
8
6
4
2
2
1
0
2/0
25’
12 10 8
6
4
4
4
2
23/0 23/0 24/0 14/0 1
80’
8
6
4
2
2
1
0
2/0
30’
12 10 8
6
6
6
4
4
23/0 24/0 24/0 1
1
90’
8
4
2
2
1
0
2/0
3/0
40’
10 8
6
6
4
4
2
2
14/0 04/0 0
2/0 2/0
100’
6
50’
10
64
62 42
41
20
22/0 13/0 04/0 2/0 3/0 4/0 4/0
110’
6
4
2
2
1
0
4/0 3/0 3/0 4/0 4/0
60’
10 6
6
4
2
2
12/0 03/0 2/0
120’
4/0 3/0 3/0 4/0 4/0
70’
86
64
42 21
20
12/0 03/0 2/0
130’
6
2
2
1
0
2/0
3/0
4/0 3/0 4/0 4/0
80’
8
6
4
2
2
1
0
2/0
140’
6
2
2
1/0
2/0
3/0
4/0
90’
8
4
2
2
1
0
2/0 3/0 4/0 4/0
150’
4/0 3/0 4/0
100’
66
42
21 20
12/0 03/0 2/0
160’
6
2
1
0
2/0
3/0
4/0 3/0 4/0
110’
6
4
2
2
1
0
2/0
170’
6
2
1
2/0
3/0
3/0
4/0 4/0
120’
6
4
2
1
0
2/0 3/0
130’
6
2
2
1
0
2/0 3/0 4/0
140’
6
2
2
1/0 2/0 3/0 4/0
150’
6
2
1
0
2/0 3/0 4/0
160’
6
2
1
0
2/0 3/0 4/0
170’
6
2
1
2/0 3/0 3/0 4/0
Conductor Sizes AWG for 10
Use 10
Voltage Drop at 12 Volts
10
VOLTAGE DROP AT 24 VOLTS
25
16
14
12
10
12
10
25
10
16
8
14
8
12
6
12
6
10
6
10
6
8
86
64
64
64
64
64
42
4
4
4
4
30
40
50
60
70 80 90 100
14
14
12
12
10 10 10 10
12
12
10
10
8
8
8
8
12
10
10
8
8
8
6
6
VOLTAGE
DROP
AT
24
VOLTS
10
10
8
8
6
6
6
6
10
8
8
6
6
6
6
4
30
40
50
60
70 80 90 100
8
8
6
6
6
4
4
4
14
14
12
12
10 10 10 10
8
6
6
4
4
4
2
12
12
10
10
8
8
8
82
6
6
4
12
10
10
84
82 82 62 62
6
6
4
2
10
10
8
8
62 62 62 61
6
4
4
2
10
8
8
6
62 62 61 41
6
4
2
2
8
8
6
6
62 41 41 40
4
4
2
2
8
6
6
4
41 41 20 20
4
2
2
2
6
6
4
4
21 20 20 20
64
62
42
21
21 20 20 12/0
4
2
2
1
6
4
4
2
20 20 12/0 12/0
2
2
1
1
6
4
2
2
20 12/0 12/0 02/0
2
2
1
0
4
4
2
2
10 12/0 02/0 03/0
2
2
1
0
4
2
2
2
12/0 02/0 03/0 03/0
2
2
1
0
3/0
4
2
2
1
12/0 02/0 03/0 2/0
4
2
2
1
0
0
2/0 2/0
2
2
1
1
0
2/0 2/0 2/0
2
2
1
0
0
2/0 2/0 3/0
2
2
1
0
2/0 2/0 3/0 3/0
voltage drop for any non-critical applications windlass, cabin lights etc.
Current (amps)
Length 5
10
15
10’
18
18
18
15’
18
18
16
20’
18
16
14
25’
18
16
14
Current
(amps)
30’
18
14
12
Length 5
10
15
40’
16
14
12
10’
18
18
18
50’
16 18
12 16
10
15’
18
60’
14 16
12 14
10
20’
18
70’
14
10
8
25’
18
16
14
80’
14
10
8
30’
18
14
12
90’
12 14
10 12
8
40’
16
100’
12
10
8
50’
16
12
10
110’
12 12
8
8
60’
14
10
120’
12 10
8
70’
14
86
130’
12
8
80’
14
10
86
140’
10
8
90’
12
10
86
150’
10
8
100’
12
10
86
160’
10
8
110’
12
8
86
170’
10
6
120’
12
8
66
130’
12
8
6
140’
10
8
6
150’
10
8
6
160’
10
8
6
20
16
14
14
12
12
20
10
16
10
14
8
14
8
12
8
12
6
10
6
10
86
86
86
66
64
64
64
6
6
4
4
Electrical
231
BATTERY CABLE
Tinned copper stranding for maximum
protection against corrosion and
electrolysis
Ultra flexible Type 3 stranding resists
fatigue due to vibration and flexing
Heavy duty Premium vinyl insulation
that resists salt water, battery acid, oil,
gasoline & UV radiation, is rated at 600
volts, 105 C
Exceeds all UL 1426, US Coast Guard
Charterboat CFR Title 46 and ABYC
standards
Larger spools available
AW
ANC111002
ANC111010
ANC111302
ANC111305
ANC111310
ANC111502
ANC111510
ANC111902
ANC111910
AW
ANC112002
ANC112005
ANC112010
ANC112305
ANC112310
ANC112502
ANC112505
ANC112510
ANC112902
ANC112910
AW
ANC113002
ANC113005
ANC113010
ANC113502
ANC113505
ANC113510
ANC113905
ANC113910
AW
ANC114002
ANC114005
ANC114010
ANC114502
ANC114505
ANC114510
ANC114902
ANC114905
ANC114910
Colour
Black
Length
25’
Black
100’
Green
25’
Green
50’
Green
100’
Red
25’
Red
100’
Yellow
25’
Yellow
100’
Colour
Black
Length
25’
Black
50’
Black
100’
Green
50’
Green
100’
Red
25’
Red
50’
Red
100’
Yellow
25’
Yellow
100’
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
50’
Yellow
100’
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
25’
Yellow
50’
Yellow
100’
AW
ANC115002
ANC115005
ANC115010
ANC115502
ANC115505
ANC115510
ANC115902
ANC115905
ANC115910
/
AW
ANC116002
ANC116005
ANC116010
ANC116502
ANC116505
ANC116510
ANC116902
ANC116905
ANC116910
/
AW
ANC117002
ANC117005
ANC117010
ANC117502
ANC117505
ANC117510
ANC117902
ANC117905
ANC117910
/
AW
ANC118002
ANC118005
ANC118010
ANC118502
ANC118505
ANC118510
ANC118905
/
AW
ANC119002
ANC119005
ANC119010
ANC119502
ANC119505
ANC119510
ANC119902
ANC119905
ANC119910
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
25’
Yellow
50’
Yellow
100’
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
25’
Yellow
50’
Yellow
100’
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
25’
Yellow
50’
Yellow
100
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
50’
Colour
Black
Length
25’
Black
50’
Black
100’
Red
25’
Red
50’
Red
100’
Yellow
25’
Yellow
50’
Yellow
100’
BATTERY CABLE ASSEMBLIES
Fine stranded for maximum conductivity and flexibility
Flame retardant, UV inhibited, rated to 600V / 105 C
Lugs are tinned copper
Each end has a piece of Ancor’s adhesive lined 3 1
heatshrink tubing placed over the electrical connection
ANC189130
ANC189134
ANC189136
ANC189140
ANC189144
ANC189146
ANC189131
ANC189135
ANC189137
ANC189141
ANC189145
ANC189147
ANC189120
ANC189121
ANC189122
ANC189123
ANC189124
Stud size Length AWG Colour
5/16
18”
4
Black
5/16
32”
4
Black
5/16
48”
4
Black
5/16
18
2
Black
5/16
32
2
Black
5/16
48
2
Black
3/8
18”
4
Red
3/8
32”
4
Red
3/8
48”
4
Red
3/8
18
2
Red
3/8
32
2
Red
3/8
48
2
Red
5/16
18”
4
Yellow
5/16
32
4
Yellow
5/16
48
4
Yellow
5/16
18
2
Yellow
5/16
32
2
Yellow
LARGER ROLLS AVAILABLE
UPON REQUEST
Ancor recommends yellow as DC negative
because black is the standard colour for AC
hot. There have been many cases of people
working on their DC systems who have
inadvertently cut the live AC wire. Because
of the wide spread use of inverters, power
generators and shore power connections,
even today s smallest boats pose a risk of
inadvertently cutting into AC wires when
working on DC systems.
232
Electrical
PRIMARY WIRE
Tinned copper stranding up to 12 more
tinned copper conductors than SAE wire for
maximum protection against corrosion and
electrolysis
Ultra flexible Type 3/Class K stranding
resists fatigue due to vibration and flexing
Premium vinyl insulation that resists salt
water, battery acid, oil, gasoline and ultraviolet radiation, rated at 600 volts and 105 C
Exceeds all UL 1426, US Coast Guard
Charterboat CFR Title 46 and ABYC
standards
AW
ANC180003
ANC100010
ANC180103
ANC100110
ANC180203
ANC100210
ANC180403
ANC100410
ANC180503
ANC100510
ANC180603
ANC100610
ANC180703
ANC100710
ANC180803
ANC100810
ANC180903
ANC100910
ANC181003
ANC101010
AW
ANC101910
ANC182003
ANC102010
ANC182103
ANC102110
ANC182203
ANC102210
ANC182303
ANC102310
ANC182403
ANC102410
ANC102510
ANC182603
ANC102610
ANC182703
ANC102710
ANC182803
ANC102810
ANC182903
ANC102910
ANC183003
ANC103010
Colour
Black
Length
35’
Black
100’
Dark blue
35’
Dark blue
100’
Brown
35’
Brown
100’
Gray
35’
Gray
100’
Orange
35’
Orange
100’
Pink
35’
Pink
100’
Purple
35’
Purple
100’
Red
35’
Red
100’
White
35’
White
100’
Yellow
35’
Yellow
100’
Colour
Light blue
Length
100’
Black
25’
Black
100’
Dark blue
25’
Dark blue
100’
Brown
25’
Brown
100’
Green
25’
Green
100’
Gray
25’
Gray
100’
Orange
100’
Pink
25’
Pink
100’
Purple
25’
Purple
100’
Red
25’
Red
100’
White
25’
White
100’
Yellow
25’
Yellow
100’
AW
ANC103910
ANC184003
ANC104010
ANC104025
ANC104050
ANC184103
ANC104110
ANC184203
ANC104210
ANC184303
ANC104310
ANC184403
ANC104410
ANC184503
ANC104510
ANC184603
ANC104610
ANC184703
ANC104710
ANC184803
ANC104810
ANC104825
ANC104850
ANC184903
ANC104910
ANC185003
ANC105010
AW
ANC186003
ANC106010
ANC186103
ANC106110
ANC106210
ANC106302
ANC106310
ANC186403
ANC106402
ANC106410
ANC186503
ANC106502
ANC106510
ANC186603
ANC106602
ANC106610
ANC106702
ANC106710
ANC186803
ANC106802
ANC106810
ANC186903
ANC106902
ANC106910
ANC107010
Colour
Light blue
Length
100’
Black
18’
Black
100’
Black
250’
Black
500’
Dark blue
18’
Dark blue
100’
Brown
18’
Brown
100’
Green
18’
Green
100’
Gray
18’
Gray
100’
Orange
18’
Orange
100’
Pink
18’
Pink
100’
Purple
18’
Purple
100’
Red
18’
Red
100’
Red
250’
Red
500’
White
18’
White
100’
Yellow
18’
Yellow
100’
Colour
Black
Length
12’
Black
100’
Dark blue
12’
Dark blue
100’
Brown
100’
Green
25’
Green
100’
Gray
12’
Gray
25’
Gray
100’
Orange
12’
Orange
25’
Orange
100’
Pink
12’
Pink
25’
Pink
100’
Purple
25’
Purple
100’
Red
12’
Red
25’
Red
100’
White
12’
White
25’
White
100’
Yellow
100’
AW
ANC188003
ANC108002
ANC108010
ANC188103
ANC108110
ANC188203
ANC108210
ANC188303
ANC108310
ANC188403
ANC108402
ANC108410
ANC108510
ANC188603
ANC108602
ANC188703
ANC108702
ANC188803
ANC108802
ANC108810
ANC188903
ANC108910
ANC189003
ANC109002
ANC109010
Colour
Black
Length
8’
Black
25’
Black
100’
Dark blue
8’
Dark blue
100’
Brown
8’
Brown
100’
Green
8’
Green
100’
Gray
8’
Gray
25’
Gray
100’
Orange
100’
Pink
8’
Pink
25’
Purple
8’
Purple
25’
Red
8’
Red
25’
Red
100’
White
8’
White
100’
Yellow
8’
Yellow
25’
Yellow
100’
ECONOMY
TINNED PRIMARY
SINGLE CONDUCTOR
Extra flexible conductor with soft drawn
tinned copper. Offers a unique flame
retardant polyvinylchloride compound VW1 , and is moisture, abrasion, acid, diesel
fuel and oil resistant. It is extremely flexible
and easy to work with. Available in 12 to 16
gauge and in black & red. CSA certified.
To order indicate gauge and colour
For example to order 12 gauge black 100
T12BKC
Electrical
DUPLEX AND TRIPLEX CABLE
Ultra flexible Type 3/Class K stranding resists fatigue due to vibration and flexing
Outer jacket is made for easy removal and provides the best abrasion resistance available
Inner conductors are correctly colour-coded to ABYC standards
SAFETY
DUPLEX CABLE
Features red and yellow Marine
Grade primary conductors in a
white common jacket
F
STANDARD
DUPLEX CABLE
Features red and black Marine
Grade primary conductors in a white
common jacket.
F
ANC121910
ANC121925
ANC121950
ANC121710
ANC121725
ANC121750
ANC121510
ANC121525
ANC121550
ANC121310
ANC121325
ANC121110
ANC120905
ANC120910
ANC120705
ANC120710
Size
18/2
Length
100’
18/2
250’
18/2
500’
16/2
100’
16/2
250’
16/2
500’
14/2
100’
14/2
250’
14/2
500’
12/2
100’
12/2
250’
10/2
100’
8/2
50’
8/2
100’
6/2
50’
6/2
100’
TRIPLEX CABLE
Features three Marine Grade primary
conductors white, black and green
in a white common jacket
F
ANC131710
ANC131510
ANC131525
ANC131302
ANC131310
ANC131102
ANC131110
ANC130902
ANC130905
ANC130910
ANC130705
R
ANC133710
ANC133510
ANC133310
ROUND INSTRUMENT CABLE
100
Mylar foil shield & drain. 20/3 cable size.
ANC153010
Size
Length
20/3
100
Size
16/3
Length
100’
14/3
100’
14/3
250’
12/3
25’
12/3
100’
10/3
25’
10/3
100’
8/3
25’
8/3
50’
8/3
100’
6/3
50
Size
16/3
Length
100
14/3
100
12/3
100
ANC124902
ANC124910
ANC124702
ANC124710
ANC124725
ANC124750
ANC124502
ANC124510
ANC124525
ANC124550
ANC124302
ANC124310
ANC124102
ANC124110
ANC123905
ANC123910
ANC123705
ANC123710
R
ANC126710
ANC126510
Size
18/2
Length
25’
18/2
100’
16/2
25’
16/2
100’
16/2
250’
16/2
500’
14/2
25’
14/2
100’
14/2
250’
14/2
500’
12/2
25’
12/2
100’
10/2
25’
10/2
100’
8/2
50’
8/2
100’
6/2
50’
6/2
100’
Size
16/2
Length
100’
14/2
100’
ROUND SIGNAL CABLE
ANC158010
Size
Length
20/8
100’
ROUND MAST CABLE
Black, blue, green, brown & red wires
TWISTED PAIRS WITH SHIELD
For all metal boats and around sensitive electronics
Ultra flexible stranding is tinned for corrosion resistance
93 Tinned copper shield for maximum EMI and RFI rejection
Features two conductors, red and black
ANC141402
ANC141410
Size
Length
14/2
25’
14/2
100’
RIBBON CABLE - FLAT
ANC154510
ANC154525
ANC153110
Size
Length
16/4
100’
16/4
250’
16/2
100
ANC155010
Size
Length
14/5
100
FLAT TRAILER CABLE
ANC154010
Size
Length
16/4
100’
BILGE PUMP CABLE
Features gray insulation with black, brown and red
conductors specifically for bilge pumps. Oil resistant.
STOW-A-Water resistant jacket
ANC156610
ANC156410
Size
Length
16/3
100’
14/3
100’
233
234
Electrical
SUPER FLEX AUDIO CABLE
Super flexible, easy to run
Drawn copper, unidirectional lay for ultimate
in sound quality
Tinned copper for corrosion resistance in the
marine environment
ANC142610
ANC142410
Size
Length
16/2
100
14/2
100
LEAD BATTERY TERMINALS
Wing nut style
ANC260100
ANC260200
ANC260325
Neg, 5/16 stud
Pos, 3/8 stud
Pos/Neg
BATTERY TERMINAL
WING NUT STYLE
Die cast lead.
Positive / negative set.
415210
TINNED COPPER
BATTERY TERMINALS
Wing nut style, yellow brass nut,
tin plated terminal
COAXIAL CABLE
Features signal loss ratios of up to 50 less than
other coaxial cables
Consists of a tinned copper centre conductor as well
as tinned copper outer braid for corrosion resistance
and easy soldering
96 braid for best signal strength and least
interference
UV inhibited white jacket for longest life
A
ANC150510
ANC151510
ANC151525
ANC151550
ANC151710
ANC151725
ANC151750
Size
RG 58CU
Length
100
RG 8X
100’
RG 8X
250’
RG 8X
500’
RG 213
100
RG 213
250
RG 213
500
ANC260010
ANC260012
ANC260322
Neg, 5/16 stud
Pos, 3/8 stud
Pos/Neg
TINNED COPPER
BATTERY TERMINALS
Emergency clamp on terminal.
92 copper tin plated.
ANC260005
LARGER ROLLS AVAILABLE
UPON REQUEST
Ancor Recommends
RG 58CU for interconnecting electronic equipment
RG 59U for TVs and some SAT NAVs
RG 8X for VHF runs less than 50 feet
RG213 for VHF runs over 50 feet
Wire size 8-2/0
TZ ZINC BATTERY TERMINALS
The TZ Zinc Terminal Ends were designed as an environmentally
friendly alternative to lead battery terminals and have a 3.6 times
better conductivity. Ultra Plated for maximum resistance to corrosion
and oxidation.
TZ210CS
TZ226CS
TZ220
TZ225
Univeral 1/pk
Pos/Neg pair
Pos. Bulk 25/Box
Neg. Bulk 25/Box
BATTERY CLIPS
ANC260505
Red/black, 2/pk
BATTERY TERMINALS
ANTI-CORROSION RINGS
Fit top or side battery posts
ANC260405
00889NE
00889PE
00898NE
00899PE
00898NPK
00899PPK
Neg. 5/16 stud Brass 1/pk
Pos. 3/8 stud Brass 1/pk
Neg. 5/16 stud Lead 1/pk
Pos. 3/8 stud Lead 1/pk
Neg. 5/16 stud Lead 5/pk
Pos. 3/8 stud Lead 5/pk
Electrical
HEAVY DUTY LUGS
Manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100 tin plated copper resists corrosion from salt & moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry & corrosion free
AW
ANC252233
ANC242233
ANC252234
ANC242234
ANC252235
ANC242235
ANC244235
ANC252236
ANC242236
ANC244236
ANC252237
ANC242237
ANC252231
AW
ANC252243
ANC242243
ANC252244
ANC242244
ANC252245
ANC242245
ANC244245
ANC252246
ANC242246
ANC244246
ANC252247
ANC242257
ANC252241
AW
ANC252253
ANC242253
ANC252254
ANC242254
ANC252255
ANC242255
ANC244255
ANC252256
ANC242256
ANC244256
ANC252257
ANC242257
ANC252251
Size
10
Qty/pkg
2
10
25
1/4
2
1/4
25
5/16
2
5/16
25
5/16
100
3/8
2
3/8
25
3/8
100
1/2
2
1/2
10
5/16 & 3/8
1/1
Size
10
Qty/pkg
2
10
25
1/4
2
1/4
25
5/16
2
5/16
25
5/16
100
3/8
2
3/8
25
3/8
100
1/2
2
1/2
10
5/16 & 3/8
1/1
Size
10
Qty/pkg
2
10
25
1/4
2
1/4
25
5/16
2
5/16
25
5/16
100
3/8
2
3/8
25
3/8
100
1/2
2
1/2
10
5/16 & 3/8
1/1
AW
ANC252264
ANC242264
ANC252265
ANC242265
ANC244265
ANC252266
ANC242266
ANC244266
ANC252267
ANC252261
AW
ANC252274
ANC242274
ANC252275
ANC242275
ANC252276
ANC242276
ANC252277
ANC252271
/
AW
ANC252284
ANC242284
ANC252285
ANC242285
ANC244285
ANC252286
ANC242286
ANC244286
ANC252287
ANC252281
Size
1/4
Qty/pkg
2
1/4
25
5/16
2
5/16
25
5/16
100
3/8
2
3/8
25
3/8
100
1/2
2
5/16 & 3/8
1/1
Size
1/4
Qty/pkg
2
1/4
25
5/16
2
5/16
25
3/8
2
3/8
25
1/2
2
5/16 & 3/8
1/1
Size
1/4
Qty/pkg
2
1/4
25
5/16
2
5/16
25
5/16
100
3/8
2
3/8
25
3/8
100
1/2
2
5/16 & 38
/
AW
ANC252294
ANC242294
ANC252295
ANC242295
ANC244295
ANC252296
ANC242296
ANC244296
ANC252297
ANC242297
ANC252291
/
AW
ANC252716
ANC242716
ANC252717
/
AW
ANC252725
ANC242725
ANC252726
ANC242726
ANC252727
HEAVY DUTY BUTT CONNECTORS
Size
1/4
Qty/pkg
2
1/4
25
5/16
2
5/16
25
5/16
100
3/8
2
3/8
25
3/8
100
1/2
2
1/2
10
5/16 & 3/8
1/1
Size
3/8
Qty/pkg
2
3/8
10
1/2
2
Size
5/16
Qty/pkg
2
5/16
10
3/8
2
3/8
10
1/2
2
ANCOR Marine Grade lugs are manufactured from heavy duty annealed tinned copper,
for maximum current flow. 100 tin plated copper resists corrosion from salt and moisture.
Seamless barrel design allows for maximum strength when crimped.
ANC252130
ANC242130
ANC252140
ANC242140
ANC252150
ANC242150
ANC252160
ANC242160
ANC252170
ANC252180
ANC242180
ANC252190
AWG
Qty/pkg
8
2
8
25
6
2
6
25
4
2
4
25
2
2
2
25
1
2
1/0
2
1/0
25
2/0
2
235
236
Electrical
BUTT CONNECTORS
Nylon insulators are easy to crimp and will not split
Barrels are designed to tightly grip the wire with little effort
Tinned copper gives the least electrical resistance but the
most corrosion protection
Highest grade electrolytic copper
NYLON INSULATED SEAMLESS
Single crimp
ANC230100
ANC210100
ANC220100
ANC230110
ANC210110
ANC220110
ANC230120
ANC210120
ANC220120
AWG
Qty/pkg
22-18
7
22-18
25
22-18
100
16-14
7
16-14
25
16-14
100
12-10
5
12-10
25
12-10
100
Male
AWG
Qty/pkg
ANC231408
ANC211408
ANC221408
ANC231418
ANC211418
ANC221418
ANC231428
ANC211428
ANC221428
ANC231409
ANC211409
ANC221409
ANC231419
ANC211419
ANC221419
ANC231429
ANC211429
ANC221429
22-18
4
25
16-14
100
12-10
2
Female
12-10
25
12-10
100
ANC230301
ANC210301
ANC230302
ANC210302
ANC220302
ANC230303
ANC210303
ANC220303
ANC230311
ANC210311
ANC230312
ANC210312
ANC220312
ANC230313
ANC210313
ANC220313
ANC230321
ANC210321
ANC230322
ANC210322
ANC220322
ANC230323
ANC210323
ANC220323
Qty/pkg
12-10
4
12-10
25
12-10
100
Nylon insulated with insulation grip funnel entry
STEP-DOWN BUTT
CONNECTORS
Vinyl insulated
AWG
100
FLANGED SPADES
Qty/pkg
25
25
12-10
100
16-14
4
12-10
16-14
3
1
3
5
100
4
100
12-10
25
16-14
1
16-14
16-14
25
25
25
16-14
22-18
6
4
16-14
ANC230819
ANC210819
ANC220819
ANC230829
ANC210829
ANC220829
22-18
2
16-14
ANC230818
ANC210818
ANC220818
ANC230828
ANC210828
ANC220828
3
8
100
AWG
22-18
8
25
22-18
Male
Qty/pkg
AWG
22-18
Female
AWG
VINYL INSULATED
ANC230164
ANC210164
ANC230165
ANC210165
ANC230166
ANC210166
Female
Nylon insulated with insulation grip funnel entry
Double crimp, funnel entry
ANC230130
ANC210130
ANC230140
ANC230150
ANC210150
Nylon insulated with insulation grip funnel entry
DISCONNECTS
NYLON INSULATED
WITH INSULATION GRIP
ANC230161
ANC210161
ANC220161
ANC230162
ANC210162
ANC220162
ANC230163
ANC210163
ANC220163
FULLY INSULATED
DISCONNECTS
Qty/pkg
16-14 to 22-18
3
16-14 to 22-18
25
12-10 to 16-14
3
12-10 to 16-14
25
8 to 12-10
3
8 to 12-10
25
Screw Size
AWG
6
22-18
Qty/pkg
6
6
22-18
25
8
22-18
6
8
22-18
25
8
22-18
100
10
22-18
6
10
22-18
25
10
22-18
100
6
16-14
6
6
16-14
25
8
16-14
6
8
16-14
25
8
16-14
100
10
16-14
6
10
16-14
25
10
16-14
100
6
12-10
5
6
12-10
25
8
12-10
5
8
12-10
25
8
12-10
100
10
12-10
5
10
12-10
25
10
12-10
100
Electrical
PIN TERMINALS
Nylon insulated with insulation grip
ANC220618
AWG
Qty/pkg
16-14
100
RING TERMINALS
Nylon insulated with insulation grip, funnel entry
MULTI-STACK CONNECTOR
ANC230612
ANC210612
AWG
Qty/pkg
16-14
3
16-14
25
DOUBLE MALE-FEMALE
CONNECTOR
1/4 tab
ANC230613
ANC210613
AWG
Qty/pkg
16-14
5
16-14
25
SPLICE CONNECTOR
ANC230615
ANC210615
ANC220615
AWG
Qty/pkg
16-14
4
16-14
25
16-14
100
SNAP PLUGS
Female
Male
AWG
ANC230708
ANC210708
ANC230718
ANC210718
ANC230709
ANC210709
ANC230719
ANC210719
22-18
4
22-18
25
16-14
4
16-14
25
SPLASH PROOF
SNAP PLUGS WITH INSERTS
Male/Female
ANC231480
ANC231490
AWG
Qty/pkg
22-18
4
16-14
4
3-WAY CONNECTORS
Nylon, insulated with insulation grip.
Double crimp, funnel entry.
ANC230510
ANC210510
ANC230520
ANC210520
AWG
Qty/pkg
16-14
1
16-14
25
12-10
1
12-10
25
Qty/pkg
ANC230201
ANC230202
ANC210202
ANC220202
ANC230203
ANC210203
ANC220203
ANC210204
ANC230205
ANC210205
ANC230206
ANC230211
ANC210211
ANC220211
ANC230212
ANC210212
ANC220212
ANC230213
ANC210213
ANC220213
ANC230214
ANC210214
ANC220214
ANC230215
ANC210215
ANC220215
ANC230216
ANC210216
ANC220216
ANC230221
ANC210221
ANC220221
ANC230222
ANC210222
ANC220222
ANC230223
ANC210223
ANC220223
ANC230224
ANC210224
ANC220224
ANC230225
ANC210225
ANC220225
ANC230226
ANC210226
ANC220226
ANC230227
ANC210227
Screw
AWG
Qty/pkg
6
22-18
6
8
22-18
6
8
22-18
25
8
22-18
100
10
22-18
6
10
22-18
25
10
22-18
100
25
1/4
22-18
5/16
22-18
5
5/16
22-18
25
3/8
22-18
5
6
16-14
6
6
16-14
25
6
16-14
100
8
16-14
6
8
16-14
25
8
16-14
100
10
16-14
6
10
16-14
25
10
16-14
100
1/4
16-14
5
1/4
16-14
25
1/4
16-14
100
5/16
16-14
5
5/16
16-14
25
5/16
16-14
100
3/8
16-14
5
3/8
16-14
25
3/8
16-14
100
6
12-10
5
6
12-10
25
6
12-10
100
8
12-10
5
8
12-10
25
8
12-10
100
10
12-10
5
10
12-10
25
10
12-10
100
1/4
12-10
4
1/4
12-10
25
1/4
12-10
100
5/16
12-10
4
5/16
12-10
25
5/16
12-10
100
3/8
12-10
4
3/8
12-10
25
3/8
12-10
100
1/2
12-10
3
1/2
12-10
25
237
238
Electrical
RING TERMINALS
Nylon insulated with insulation grip, funnel entry
ANC230233
ANC210233
ANC222233
ANC230234
ANC210234
ANC230235
ANC210235
ANC230236
ANC210236
ANC230237
ANC230243
ANC210243
ANC230244
ANC230245
ANC230246
ANC230247
ANC230253
ANC230254
ANC230255
ANC230256
ANC230257
Screw
AWG
Qty/pkg
10
8
2
10
8
25
10
8
100
1/4
8
2
1/4
8
25
5/16
8
2
5/16
8
25
3/8
8
2
3/8
8
25
1/2
8
2
10
6
1
10
6
25
1/4
6
1
5/16
6
1
3/8
6
1
1/2
6
1
10
4
1
1/4
4
1
ADHESIVE LINED
HEATSHRINK DISCONNECTS
ANC316803
ANC316825
ANC316899
ANC316903
ANC316925
ANC317803
ANC317825
ANC317899
ANC317903
ANC317925
ANC317999
AWG
Gender
Qty/pkg
22-18
Female
3
22-18
Female
25
22-18
Female
100
22-18
Male
3
22-18
Male
25
16-14
Female
3
16-14
Female
25
16-14
Female
100
16-14
Male
3
16-14
Male
25
16-14
Male
100
5/16
4
1
ADHESIVE LINED HEAT SHRINK
FLANGED SPADE TERMINALS
3/8
4
1
Female
1/2
4
1
ADHESIVE LINED HEAT SHRINK
TERMINALS & CONNECTORS
Heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to a watertight seal for the ultimate vibration & strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
Nylon insulator, for Marine Grade resistance to sunlight, water, oil,
chemicals, vibration and cut-through damage
UL listed and CSA recognized
ANC313203
ANC313225
ANC314203
ANC314225
ANC314299
ANC314303
ANC314325
ANC314399
ANC315203
ANC315225
ANC315303
ANC315399
Screw Size
AWG
8
22-18
3
8
22-18
25
8
16-14
3
8
16-14
25
8
16-14
100
10
16-14
3
10
16-14
25
10
16-14
100
8
12-10
3
8
12-10
25
10
12-10
3
10
12-10
100
ADHESIVE LINED
HEAT SHRINK BUTT CONNECTORS
ANC309003
ANC309025
ANC309099
ANC309103
ANC309125
ANC309199
ANC309102
ANC309203
ANC309225
ANC309299
ANC309202
ANC300000
AWG
Qty/pkg
22-18
3
22-18
25
22-18
100
16-14
3
16-14
25
16-14
100
16-14
500
12-10
3
12-10
25
12-10
100
12-10
500
22-10
10pc kit
ADHESIVE LINED
HEAT SHRINK SNAP PLUGS
ANC318825
ANC318903
ANC318925
ANC319803
ANC319825
ANC319903
ANC319925
Qty/pkg
AWG
Gender
22-18
Female
25
Qty/pkg
22-18
Male
3
22-18
Male
25
16-14
Female
3
16-14
Female
25
16-14
Male
3
16-14
Male
25
Electrical
ADHESIVE LINED HEAT SHRINK
RING TERMINALS
Female
ANC310203
ANC310225
ANC310299
ANC310303
ANC310325
ANC310399
ANC310403
ANC310425
ANC310499
ANC310525
ANC310603
ANC310625
ANC310699
ANC311203
ANC311225
ANC311299
ANC311303
ANC311325
ANC311399
ANC311403
ANC311425
ANC311499
ANC311503
ANC311525
ANC311599
ANC311603
ANC311625
ANC311699
ANC312203
ANC312225
ANC312299
ANC312303
ANC312325
ANC312399
ANC312403
ANC312425
ANC312499
ANC312503
ANC312525
ANC312599
ANC312603
ANC312625
ANC312699
Screw
AWG
Qty/pkg
8
22-18
3
8
22-18
25
8
22-18
100
10
22-18
3
10
22-18
25
10
22-18
100
1/4
22-18
3
1/4
22-18
25
1/4
22-18
100
5/16
22-18
25
3/8
22-18
3
3/8
22-18
25
3/8
22-18
100
8
16-14
3
8
16-14
25
100
8
16-14
10
16-14
3
10
16-14
25
10
16-14
100
1/4
16-14
3
1/4
16-14
25
1/4
16-14
100
5/16
16-14
3
5/16
16-14
25
5/16
16-14
10
3/8
16-14
3
3/8
16-14
25
3/8
16-14
100
8
12-10
3
8
12-10
25
8
12-10
100
10
12-10
3
10
12-10
25
10
12-10
100
1/4
12-10
3
1/4
12-10
25
1/4
12-10
100
5/16
12-10
3
5/16
12-10
25
5/16
12-10
100
3/8
12-10
3
3/8
12-10
25
3/8
12-10
100
239
ADHESIVE LINED HEAVY WALL
BATTERY CABLE TUBING
3/4 shrinks to 1/4 wire AWG range 8 - 2/0
1 shrinks to 3/8 wire AWG range 2 - 4/0
ANC326103
ANC326106
ANC326148
ANC326603
ANC326648
ANC326202
ANC327103
ANC327106
ANC327124
ANC327148
ANC327202
ANC327603
ANC327606
ANC327624
ANC327648
Colour
Dia.
Length
Qty/pkg
Black
3/4
3
3
Black
3/4
6
3
Black
3/4
48
1
Red
3/4
3
3
Red
3/4
48
1
Red/black
3/4
3
1/1
Black
1
3
3
Black
1
6
2
Black
1
12
2
Black
1
48
1
Black/red
1
3
1/1
Red
1
3
3
Red
1
6
2
Red
1
12
2
Red
1
48
1
SHRINK TUBE
ADHESIVE LINED - DUAL WALL 3 TO 1
Adhesive lined polyolefin, heat shrinkable tubing. Tubing is designed
for environmental sealing of electrical components including wire
splices, harness breakouts and cable ends from fluids, moisture
and corrosion. The adhesive inner lining bonds to a wide variety of
substrates.
Size
08329E
083295E
08330E
083305E
08331E
083315E
08332E
083325E
08333E
083335E
08334E
083345E
08335E
083355E
1/8
Colour Length
black
48
1/8
red
48
3/16
black
48
3/16
red
48
1/4
black
48
1/4
red
48
3/8
black
48
3/8
red
48
1/2
black
48
1/2
red
48
3/4
black
48
3/4
red
48
1
black
48
1
red
48
240
Electrical
1/2 Dia.
HEAT SHRINK PRODUCTS
Cross linked polyolefin tubing is much stronger than PVC tubing and will
not burn like PVC. Heat activated adhesive lining provides impervious
seal to salt water, oil, acids and sunlight as well as providing strain relief.
Highest shrink ratio - shrinks to 1/3 original size
Size DIA. Shrinks to Wire Range AWG
1/8”
1/32”
18
3/16”
1/16”
20 - 12
1/4”
5/64”
16 - 10
3/8”
1/8”
12 - 8
1/2”
5/32”
8-4
3/4”
1/4”
6 - 2/0
1”
5/16”
2 - 4/0
ANC305103
ANC305106
ANC305124
ANC305148
ANC305602
ANC305603
ANC305606
ANC305624
ANC305648
ANC305903
ANC305948
3/4 Dia.
1/8 Dia.
ANC301103
ANC301106
ANC301124
ANC301148
3/16 Dia.
ANC302103
ANC302106
ANC302124
ANC302148
1/4 Dia.
ANC303103
ANC303106
ANC303124
ANC303148
ANC303602
ANC303606
ANC303624
ANC303648
ANC303903
ANC303906
ANC303948
3/8 Dia.
ANC304103
ANC304106
ANC304124
ANC304148
ANC304403
ANC304448
ANC304602
ANC304603
ANC304606
ANC304624
ANC304648
ANC304703
ANC304706
ANC304748
ANC304803
ANC304848
ANC304903
ANC304948
Colour
Length
Qty/pkg
Black
3
3
Black
6
10
Black
12
10
Black
48
1
Colour
Length
Qty/pkg
Black
3
3
Black
6
10
Black
12
10
Black
48
1
Colour
Length
Qty/pkg
Black
3
3
Black
6
10
Black
12
10
Black
48
1
Black/red
3
1/1
Red
6
5
Red
12
5
Red
48
1
Yellow
3
3
Yellow
6
10
Yellow
48
1
Colour
Length
Qty/pkg
Black
3
3
Black
6
5
Black
12
5
Black
48
1
Blue
3
3
Blue
48
1
Black/red
3
1/1
Red
3
3
Red
6
5
Red
12
5
Red
48
1
Green
3
3
Green
6
3
Green
48
1
White
3
3
White
48
1
Yellow
3
3
Yellow
48
1
ANC306103
ANC306106
ANC306124
ANC306148
ANC306403
ANC306602
ANC306603
ANC306606
ANC306624
ANC306648
ANC306748
ANC306848
ANC306904
ANC306903
ANC306906
ANC306924
ANC306948
1 Dia.
ANC307103
ANC307106
ANC307148
ANC307603
ANC307606
ANC307648
ANC307903
ANC307948
Colour
Length
Qty/pkg
Black
3
3
Black
6
5
Black
12
5
Black
48
1
Black/red
3
1/1
Red
3
3
Red
6
5
Red
12
5
Red
48
1
Yellow
3
3
Yellow
48
1
Colour
Length
Qty/pkg
Black
3
3
Black
6
4
Black
12
4
Black
48
1
Blue
3
3
Black/red
3
1/1
Red
3
3
Red
6
4
Red
12
4
Red
48
1
Green
48
1
White
48
1
Yel/red
3
1/1
Yellow
3
3
Yellow
6
4
Yellow
12
4
Yellow
48
1
Colour
Length
Qty/pkg
Black
3
3
Black
6
3
Black
48
1
Red
3
3
Red
6
3
Red
48
1
Yellow
3
3
Yellow
48
1
HEAT SHRINK TUBING KITS
ANC301503
ANC301506
ANC304503
ANC304506
ANC306503
ANC306506
Colour
Dia
Length
Qty/pkg
Black
3/16-3/4
3
8
Black
3/16-3/4
6
8
Assorted
3/8
3
5
Assorted
3/8
6
5
Assorted
3/4
3
4
Assorted
3/4
6
4
Electrical
FLAME RETARDANT
CONVOLUTED TUBING
Flexible black with blue stripe flame retardant
polypropylene tubing holds groups of wires in
position. Slit for easy insertion of wires.
05150-26
05151-26
05152-26
05153-26
1/4 x 100
3/8 x 100
1/2 x 100
3/4 x 100
CONVOLUTED TUBING
Flexible black polyethylene tubing holds groups of wires in
position and gives the wire excellent protection against abrasion
and crushing. Slit for easy insertion of wires.
05140B
05140C
05141B
05141C
05142B
05142C
05139C
1/4 x 50
1/4 x 100
3/8 x 50
3/8 x 100
05143B
05143C
05144B
05144C
3/4 x 50
3/4 x 100
1 x 50
1 x 100
1/2 x 50
1/2 x 100
5/8 x 100
STAINLESS STEEL CUSHION CLAMPS
Meets ABYC specifications. Temperature rating of -40 F to 300 F
EPDM insulator is temperature, water, fuel, oil and acid resistant.
10 per package
Nominal
Diameter
ANC403182
ANC403252
ANC403312
ANC403372
ANC403432
ANC403502
ANC403562
ANC403622
ANC403752
ANC403872
ANC403892
ANC403902
ANC404152
ANC404172
ANC404202
ANC404252
ANC404302
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
SPLIT CONDUIT
Corrugated Polypropylene Conduit Hose. Safe and easy to install
for multi-wire harness, cable & hose routing. Sold per foot
TRI128-012 1/2
Black
TRI128-034 3/4
Black
TRI128-100 1
Black
TRI128-114 1-1/4 Black
TRI128-112 1-1/2 Black
TRI128-200 2
Black
SCW2
2
White
SPIRAL WRAP
Black, 10 long
ANC452251
ANC452381
ANC452501
ANC452751
ANC452900
1/4 dia.
3/8 dia.
1/2 dia.
3/4 dia.
1 dia.
SPIRAL WRAP
Black
05121OC
05122OC
3/8 dia. x 100
1/2 dia. x 100
EXPANDABLE LOOM 100 SPOOLS
A versatile bundling & protection solution. Easy to install,
light weight, flexible UV resistant, cuts easily, high
abrasion resistance & chemically and organically inert.
08404-0-26
08405-0-26
08406-0-26
08407-0-26
1/4 to 7/16
3/8 to 5/8
1/2 to 3/4
3/4 to 1-1/4
HEAVY-DUTY
NYLON CABLE CLAMPS
Cable clamps provide one-piece bundling and mounting. Easy to read
maximum bundle diameters are molded in. Smooth, rounded internal
edges protect wire insulation. 1/2 strap width.
25 PACK
100 PACK
07118HNPK
07119HNPK
07119HNOPK
07120HNPK
07120HNOPK
07121HNPK
07122HNPK
07122HNOPK
07123HNPK
07124HNPK
07124HNOPK
07125HNPK
07126HNPK
07128HNPK
07129HNPK
07130HNPK
07131HNPK
07132HNPK
07133HNPK
07135HNPK
07118HNC
07119HNC
07119HNOC
07120HNC
07120HNOC
07121HNC
07122HNC
07122HNOC
07123HNC
07124HNC
07124HNOC
07125HNC
07126HNC
07128HNC
07129HNC
07130HNC
07131HNC
07132HNC
07133HNC
07135HNC
Nominal
Clamping Dia.
Colour
1/8
Natural
3/16
Natural
3/16
Black
1/4
Natural
1/4
Black
5/16
Natural
3/8
Natural
3/8
Black
7/16
Natural
1/2
Natural
1/2
Black
9/16
Natural
5/8
Natural
3/4
Natural
7/8
Natural
1
Natural
1-1/8
Natural
1-3/16
Natural
1-1/4
Natural
1-1/2
Natural
241
242
Electrical
ABYC Recommends Conductors shall be supported throughout their length or shall be secured at least every 18 inches 455mm by one
of the following methods By means of non-metallic clamps sized to hold the conductors firmly in place...the material shall be resistant to oil,
gasoline, and water and shall not break or crack within a temperature range of 34 30 F to 121 C 250
NYLON CABLE CLAMPS
Made from nylon for maximum strength
Resistant to solvents, oils, acids and moisture
Unique screw hole alignment feature to speed installation
Available in natural or UV resistant black for outdoor use
ANC401121
ANC401122
ANC402122
ANC401181
ANC401182
ANC401251
ANC401252
ANC401255
ANC402252
ANC401312
ANC402312
ANC401372
ANC401375
ANC402372
ANC401502
ANC402502
ANC402505
ANC401431
ANC401432
ANC402431
ANC402432
ANC402435
ANC401622
ANC402622
ANC402625
ANC401751
ANC401752
ANC402751
ANC402752
ANC401872
ANC402871
ANC402872
ANC401892
ANC402892
ANC401911
ANC401912
ANC402911
ANC401931
ANC401932
Nominal
Dia. in
Colour
Qty/ pkg
1/8
natural
7
1/8
natural
25
1/8
UV black
25
3/16
natural
7
3/16
natural
25
1/4
natural
6
1/4
natural
25
1/4
natural
100
1/4
UV black
25
5/16
natural
25
5/16
UV black
25
3/8
natural
25
3/8
natural
100
3/8
UV black
25
1/2
natural
25
1/2
UV black
25
1/2
UV black
100
7/16
natural
6
7/16
natural
25
7/16
UV black
5
7/16
UV black
25
7/16
UV black
100
5/8
natural
25
5/8
UV black
25
5/8
UV black
100
3/4
natural
3
3/4
natural
25
3/4
UV black
3
3/4
UV black
25
7/8
natural
25
7/8
UV black
3
7/8
UV black
25
1
natural
25
1
UV black
25
1-1/4
natural
2
1-1/4
natural
25
1-1/4
UV black
2
1-1/2
natural
2
1-1/2
natural
25
NYLON STANDARD CABLE TIES
Manufactured from the toughest of materials, pure virgin nylon 6/6.
insoluble in common solvents, alkalis, dilute mineral acids, most organic acids
and most petrochemicals. Black ties are UV resistant.
MAR199200
MAR199201
MAR199202
MAR199203
MAR199246
MAR199247
MAR199248
MAR199249
MAR199204
MAR199205
MAR199206
MAR199207
MAR199208
MAR199209
MAR199210
MAR199211
MAR199212
MAR199213
MAR199214
MAR199215
MAR199259
MAR199260
MAR199261
MAR199224
Length
Max.
Bundle
Dia.
Tensile
strength
lbs.
Colour
Qty/
pkg
4”
13/16”
18
natural
25
4”
13/16”
18
natural
100
4”
13/16”
18
UV black
25
4”
13/16”
18
UV black
100
6”
1-3/8”
45
natural
25
6”
1-3/8”
45
natural
100
6”
1-3/8”
45
UV black
25
6”
1-3/8”
45
UV black
100
8”
2-3/16”
75
natural
25
8”
2-3/16”
75
natural
100
8”
2-3/16
75
UV black
25
8”
2-3/16
75
UV black
100
11”
3”
75
natural
25
100
11”
3”
75
natural
11
3”
75
UV black
25
11
3”
75
UV black
100
14
4”
75
natural
25
14
4”
75
natural
100
14
4”
75
UV black
25
14
4”
75
UV black
100
15
4”
120
UV black
25
15
4”
120
UV black
100
Assorted lengths 4 thru 8 , UVblack/natural
25
Assorted 8 blue, green, yellow, red, UV black,
white
25
STAINLESS STEEL CABLE TIES
T304 stainless steel for corrosion resistance
Heavy duty locking mechanism
ANC403110
ANC403114
10-1/2 5-Pack
14 5-Pack
Electrical
243
NYLON TIE WRAPS
One piece self-locking tie wraps. No metal barbs. Wrap tie wrap around cable, slip tail through
the head and pull tight. Tie locks in place automatically. Snip off excess. General purpose nylon,
suitable for use in most practical applications at a continuous temperature up to 150 F. UV
stabilized cable ties only available in black.
25 PACK
100 PACK
07063PK
07063OPK
07065PK
07065OPK
07066PK
07066OPK
07066N3PK
07066N4PK
07066N7PK
07066HDPK
07066HDOPK
07067PK
07067OPK
07067PK
07067OPK
07068PK
07068OPK
07063C
07063OC
07065C
07065OC
07066C
07066OC
07066HDC
07066HDOC
07067C
07067OC
07067C
07067OC
07068C
07068OC
07068HDC
07068HDOC
07069C
07069OC
07070C
07070OC
07068HDOPK
Length
Max
Bundle Dia.
Tensile S
trength lbs.
Colour
4”
7/8”
18
Natural
4”
7/8”
18
Black
6”
1-3/8”
40
Natural
6”
1-3/8”
40
Black
7-1/2”
1-7/8”
40
Natural
7-1/2”
1-7/8”
40
Black
7-1/2”
1-7/8”
40
Green
7-1/2”
1-7/8”
40
Orange
7-1/2”
1-7/8”
40
Yellow
8-3/4”
2”
120
Natural
8-3/4”
2”
120
Black
11-1/2”
3”
50
Natural
11-1/2”
3”
50
Black
11-1/2”
3”
50
Natural
11-1/2”
3”
50
Black
14-1/2”
4-1/8”
50
Natural
14-1/2”
4-1/8”
50
Black
15”
4”
120
Natural
15”
4”
120
Black
25-1/4”
7-1/8”
175
Natural
25-1/4”
7-1/8”
175
Black
28-1/2”
8”
120
Natural
28-1/2”
8”
120
Black
MOUNTING NYLON TIE WRAPS
NYLON MOUNTING CABLE TIES
Manufactured from the toughest of materials, pure virgin nylon 6/6.
insoluble in common solvents, alkalis, dilute mineral acids, most
organic acids and most petrochemicals. Black ties are UV resistant.
MAR199244
MAR199245
MAR199250
MAR199251
MAR199252
MAR199253
MAR199226
MAR199227
MAR199228
MAR199229
MAR199230
MAR199257
MAR199258
Length
Max.
Bundle
Dia.
Tensile
Strength
lbs.
Colour
Qty/
pkg
4”
3/4”
18
natural
25
4”
3/4”
18
UV black
25
6”
1-3/8”
30
natural
25
6”
1-3/8”
30
natural
100
6”
1-3/8”
30
UV black
25
6”
1-3/8”
30
UV black
100
8”
2”
50
natural
25
8”
2”
50
natural
100
8”
2“
50
UV black
25
8”
2“
50
UV black
100
14”
4”
50
natural
25
14”
4“
50
UV black
25
14”
4“
50
UV black
100
One piece self-locking tie wraps. No metal barbs. Wrap tie wrap
around cable, slip tail through the head and pull tight. Tie locks in place
automatically. Snip off excess. General purpose nylon, suitable for use in
most practical applications at a continuous temperature up to 150 F. UV
stabilized cable ties only available in black.
25 PACK
100 PACK
Length
Max
Bundle
Dia.
07071PK
07071OPK
07072PK
07072OPK
07075PK
07075OPK
07076PK
07076OPK
07077PK
07077OPK
07078PK
07078OPK
07071C
07071OC
07072C
07072OC
07075C
07075OC
07076C
07076OC
07077C
07077OC
6”
1-1/4”
30
6”
1-1/4”
30
Black
8”
1-3/4”
50
Natural
07070OC
Tensile
Strength
lbs.
Colour
Natural
8”
1-3/4”
50
Black
11-3/4”
3”
50
Natural
11-3/4”
3”
50
Black
14-1/2”
4”
50
Natural
14-1/2”
4”
50
Black
15-3/4”
4”
120
Natural
15-3/4”
4”
120
Black
22”
6”
120
Natural
22”
6”
120
Black
28-1/2”
8”
120
Black
244
Electrical
CABLE WRAPTOR
T handle feature allows for easy carrying of ropes, cordsets and extension cords
Large hole for hanging
Stainless steel hinge and spring to prevent rusting
Large teeth design for secure locking
Easy release trigger
Spring-loaded hinge helps close tail
CW-T2R2
Medium 2-pack
CW-T3R2
Large 2-pack
CW-T2T3R2 1 Large & 1 Medium 2-pack
CW-T4RR20 1 X-Large 1-pack
CW-T2RR25 Medium P.O.P display 25-units
CW-T3RR25 Large P.O.P display 25-units
CW-T4M20 X-Large P.O.P display 20-units
TIE WRAP MOUNT
Screw Tie mount will fit Pico cable ties 07063 through 07079.
Will mount cable bundles in a stable and rigid manner. Mount
with 1/4 screw.
07183-6-34
07183-6-36
07183-0-34
07183-0-36
07081C
07081-O-36
White, 25/pk
White, 100/pk
UVR Black, 25/pk
UVR Black, 100/pk
White, adhesive back,100/pk
Holds up to
L
Holds up to
lbs
lbs
L
Holds up to
lbs
ELECTRICAL TAPE
3M COLOURFLEX tape is an economically
priced coloured electrical tape. 3/4 x 66 .
49656
66110
66113
66114
66111
66115
Black
Blue
Red
White
Green
Yellow
UV Black, adhesive back,100/pk
LIQUID ELECTRIC TAPE
Waterproofs & protects electrical connections
Prevents corrosion on wires and terminals
Fast drying
Forms a protective UV resistant
dielectric coating
CABLE TIE MOUNTS
ANC374501
MAR199231
MAR199232
MAR199262
MAR199263
ANC375001
MAR199234
MAR199236
8 screw, pkg of 3
8 screw, pkg of 25
8 screw, pkg of 100
S84104
S84105
S84106
S84107
S84108
Black, 4 fl oz
Red, 4 fl oz
Green, 4 fl oz
White, 4 fl oz
Clear, 4 fl oz
10 screw, pkg of 25
10 screw, pkg of 100
Adhesive, pkg of 2
Adhesive, pkg of 25
Adhesive, pkg of 25 black
DIELECTRIC
SILICONE COMPOUND
Fights oxidation to improve conductivity
Penetrates aluminum oxide to maintain current paths
Temperature range 40 -500 F
ANC700115
VELCRO
CABLE TIES
Reusable Velcro strip for fastening cable and wire
Quick, secure grip, perfect for marine use
Convenient for frequent access
ANC353115
MAR199239
11 yellow 5-pack
11 black 5-pack
1/3 oz tube
WHITE WRITE-ON
IDENTIFICATION TUBING
Feeds through most typewriters and printers for custom labeling
applications. Once activated with any heat tool, printing is permanent
and will not wash off or erode when exposed to oils, moisture, air or
most solvents. Does not have adhesive lining and should not replace
regular shrink wrap for terminal ends
ANC300145
1/4” dia. 3”length 10/pkg
Electrical
245
HEAVY-DUTY
VOLTAGE & CONTINUITY TESTER
MINI CLAMP MULTIMETER
Clamp allows measurement of AC and DC current in wires
without disturbing the circuits or contacting live terminals
Auto range simplifies operation 0.01-400 Amps, 0.001-600 Volts
True RMS - required for accurate measurement of inverter
output
Large digital display makes reading measurements easy
“HOLD” button during measurement to lock reading value
Test leads included with meter
Tests voltage from 80-480 VAC/DC 4-range indication
Snap-in leads are spaced to fit standard outlet for
hands-free operation
Sta-Flex 36 cold weather leads
4 Hi-Vis indicators
Integrated probe storage
Operates from 2 LR44 batteries
ET6207
BSS8110
WIRE TACKER
Multi-purpose wire tracer for identifying wires such as coax,
CAT 5, speaker, phone, or any non-energized non-live wires
Adapter plugs include RJ-45, RJ-11, coax, automotive fuse
blade, and insulated clamps
Adjustable sensitivity positively identifies a single wire when
multiple wires are routed in close proximity
Audible and visual indication
Operates from 2 AAA batteries and 4 LR44 batteries
receiver
ET64220
HANDHELD DIGITAL MULTIMETER
Large backlit LCD display. Built-in EZ stand, continuity tone alert.
Test leads included. Low battery indicator. Measures AC and
DC voltage, DC current resistance and continuity. 6V battery not
included. 143mm x 75mm x 32mm.
87730
7 FUNCTION DIGITAL MULTIMETER
Auto ranging capability allows the meter to automatically determine
the resolution based on the application
AC/DC voltage capable with temperature measurement functionality
Protective rubber overmold
Operates from 2 AAA batteries
DM6250
9 FUNCTION DIGITAL MULTIMETER
Test Lead Input Icons for correct lead placement
Industry leading LCD display size
Relative Delta displays change in readings
Low Impedance Function to trace ghost voltage
Impact resistant housing with protective rubber boot
Operates from one 9 volt battery
Measures DC voltage, AC Voltage, DC Amps, AC Amps, Frequency,
Capacitance, Resistance, Diode Test, Continuity.
DM6450
BATTERY
INDICATOR GAUGE
Eliminate the guess work
Instantly determine condition of your 12-volt battery system.
Expanded scale allows for easy to read battery level.
Rear backlit scale.
042218
246
Electrical
WIRE AND CABLE CUTTER
Precision ground and sharpened blades, high strength steel
Contoured cushion grip
Capacity 22AWG to 2/0 AWG copper wire & cable not for steel
ANC702005
DOUBLE CRIMP RATCHET TOOL
Ratcheting action insures positive crimps, includes release lever
Two nests in crimp cavity simultaneously crimps conductor and
insulation for maximum strain and fatigue relief
Compound lever handle for operator ease
Capacity crimps 22-10 AWG terminals and connectors in three
colour-coded cavities
ANC702017
AUTOMATIC WIRE STRIPPER
Made of reinforced polyamide - auto adjusts to different wire sizes
Strips without damage or marking of conductors, slim jaw for easy
access, steel side cutter
Capacity strips and cuts wire from 24 AWG to 12 AWG
Wire stop adjusts length of strip from 3/8” to 1/2”
DELUXE TERMINAL
CRIMPER TOOL
Powder coated steel.
Crimps 22-10 gauge terminals.
429910
ANC702030
WIRE STRIP / CRIMP TOOL
Strips 26 to 10 AWG stranded wire
Automatic jaw-load wire stripper self-adjusts to strip wire
Crimps 22-10 AWG insulated terminals
ANC702033
DOUBLE CRIMP RATCHET TOOL
Double ratchet crimper-combines the frame 701020 and double
crimp die 701023
Ratchet mechanism crimps stranding and insulation grip portion
of connectors all in one motion for superior strain relief
Tool has adjustment feature to allow for wear and a release lever
in event of incorrectly placed terminal
Crimps 22-10 AWG insulated terminals in three cavities
ANC701030
WIRE STRIPPER
CRIMPER TOOL
Powder coated steel.
Crimps 22-10 gauge terminals.
429900
STAINLESS CUT /STRIP /CRIMP TOOL
Crimp 10-22 AWG insulated and non-insulated terminals and coaxial
connectors
Cut and strip 8-22 AWG solid and 10-24 AWG stranded wire
Cut and rethread 4-40, 5-40, 6-32, 8-32, 10-24, 10-32 screws
Stainless steel blade resists corrosion and nicking
Dual GRIP is easier on wrists
Molded ergonomic handles make tool easier to grip for stronger
crimping
Laser etched permanent markings
Precision ground plier nose
HEAVY DUTY
LUG/TERMINAL CRIMPER
Calibrated adjustment screw
Compound lever action prevents operator
fatigue
Capacity crimps 8-4/0 AWG lugs and terminals
ANC702040
ANC701009
HEAVY DUTY LUG CRIMPER
BATTERY CABLE STRIPPER
Made of fiberglass reinforced polyimide, swivel blade
for circular and longitudinal cuts.
ANC702065
Spring loaded pivot bar, designed for use with a hammer or vise
Makes UL approved crimps
Made from steel with a hardened pivot pin
Capacity crimps 6-4/0 lugs and 6-3/0 AWG terminals
ANC701010
Electrical
247
TURBO LITE TORCH
Child resistant Piezo electronic ignition system
Butane powered
Flame temperature up to 1300 C/2500 F
Windproof and weatherproof flame
Flame may be locked in “on” position
Very small and easy to carry ideal for quick jobs
ANC702064
ULTRA THERM HEAT TOOL
Cordless, simple, safe to operate under any conditions
Ready to use 15 seconds after ignition
Tank contains 120 minutes of operation and is refillable by butane
Includes interchangeable soldering tip, hot blower/deflector and hot
knife
Butane not included
ANC702061
MINI POCKET BUTANE TORCH
Electronic ignition system with safety locking switch
Flame temperature up to 1300 C
Windproof flame and waterproof ignition make torch
ideal for offshore use
Compact size allows unit to fit easily into any toolbox
Refillable butane cartridge
Butane not included
ANC702024
PRO TORCH
MICRO THERM HEAT GUN
Features Piezo electronic ignition system, providing flameless heat,
safe for use around chemicals or by wire bundles when using deflector
Powered by refillable cell
Flame temperature up to 650 C / 1300 F
Ideal for work in the bilge where open flame should not be used
ANC702027
ELECTRICAL REPAIR KIT
With strip/crimp tool. 225 pieces.
ANC220020
State of the art Piezo electronic ignition system
Up to 120 minutes use on each filling
Heavy duty ribbed aluminum body with comfort grip
Easily refilled with any brand of butane gas
High output flame for large jobs
Hands-free design
ANC702060
248
Electrical
er Motors
edium windows Marine Wipers
2VBMJUZ.BSJOF&RVJQNFOU
WINDSHIELD WIPER MOTORS
Exalto s quality sets the standard for heavy duty windshield wipers
250BS & 280BS
and accessories. With a wide selection of
motors
arms,
Exalto
These
strongand
wiper
motors
are the
can supply your needs. Listed below arepremier
some systems
of the motors
offered.
for windows
larger than
250BS
All motors listed share the following features
1100 mm (43”) in height. They can easily
drive robust wiper arms and blades and
Designed for bulkhead mounting
endure the rough weather conditions at sea.
Self parking
Adjustable pantograph arms and wiping arcs
Two speeds
give customized coverage.
Marine Wipers
Stainless235KG
steel shafts, bolts, nuts and washers
TYPE
250BS
Designed for pantographic arms
The 250BS can power arms up to 1000 mm
Steplessly adjustable wiping arc from 40 to 90 . Standard available
Available in 12VDC or 24VDC
with 1200 mm blades. His big brother, the
for bulkhead thicknesses of 35 and 65mm. Double brass bearings.
280BS, is the strongest of all Exalto H.D.
Insulated ground return
wipers. It can power arms up to 1500 mm in Designed for pantograph arms up to 1000mm. Designed for blades
length in combination with blades of 1200 mmup to 1200mm. Power consumption 30w, torque 50Nm.
2VBMJUZ.BSJOF&RVJQNFOU
maximum. This means that windows up to
2100 mm in height are cleared without any
trouble!
Both motors have stainless steel 316 shafts,
bolts and nuts. The two driven shafts run in self235KG / 233BD.
These
motorsLike
haveall
theExalto
same H.D.
lubricating
bronze
bearings.
dimensions.
wipers
they feature two speeds and are selfparking as standard fitting.
232BD
4
233BD
Marine Wipers
2VBMJUZ.BSJOF&RVJQNFOU
TYPE
233BD233BD
EX2151.35
750 mm
800 mm
EX2198.50
20, 35, 55, 75, 100, 125 mm
Wiper motor, 55mm
Cover
Yes
Yes
280BS
Voltage
12 and 24
24
Torque
50 Nm
80 Nm
Power Consumption
30W
95W
50 mm
Exalto has designed special pan
for these two motors. The P10 a
motor 250BS. They are available
for blades from 300 to 800 mm
from 900 to 1200 mm. The arms
in length, with a minimum leng
and a maximum length of 1000
Optional
Yes
25The
mm pantograph arms are available in three
adjustable
lengths. Please, note that the
1500
mm
HEAVY-DUTY 2 SPEED YACHT MOTOR
20 mm
blades up to 28 - 40
27 mm
24V
12V
The PU arms have one or two adjustable springs
60 mm
60 mm
and a black coating for durable finish. The ONG30011
Driven Shaft(s)
Dual
Dual
PU arms are also available in high polished
Compatible arms
P10
P12
ONG30021
stainless steel.
8 mm
P10 and P12 Arms
The P10 arms are available with
glass
1200
mmmounted 235KG can drive arms with
adjustable springs. A black coat
spring
pressure
on
the
window.
The
arms
can
a
maximum
length
of
450
mm,
where
the
Two speeds thickness Yes
Yes
on the arms to prevent reflectio
bulkhead
be
placed
in
fixed
position
away
from
the
bulkhead
mounted
232BD
and
233BD
can
drive
Self-parking
Yes
DrawsYes
7 Amps for 12Volt & 4 Amps for 24Volt, Adj sweep 40 towith fixed springs can be folded
windshield.
This
makes
it
easier
to
mount
the
arms
with
a
maximum
length
of
750
mm.
Wiping Arc 40°-90°
Stepless
in high polished s
100 inStepless
1 intervals. Motor pulls 25ft.pd 38nm arms up to 24 - also
35 available
,
arms, replace the blades20ormm
clean the window.
Drive Shaft Sleeve
27 mm
Centre Distance
20 mm
ONG30031
Single
For the 280BS, the P12 arms are
can be supplied in any required
with a maximum of 1500 mm. T
coated arms have two adjustab
Fold Back Feature
Shaft
ONG30012
ONG30022
ONG30032
1.5”
2.5”
3.5”
8
7
HEAVY-DUTY ARMS
Stainless steel
Marine Wipers
TYPE 223BS
2VBMJUZ.BSJOF&RVJQNFOU
Steplessly adjustable wiping arc from 40 to 90 . Standard available
for bulkhead thicknesses of 20, 35 and 55mm. Brass bearings.
Designed for pantograph arms up to 750mm. Designed for blades up
to 800mm. Power consumption 36W, 12V, torque 23Nm.
EX2167.35
Wiper motor, 55mm bulkhead thickness
ONG37835
ONG38835
Arm 24” - 35” Electro Polished
Arm 24” - 35” Black Powder Coated
HEAVY-DUTY BLADES
ONG30828
ONG30830
ONG30832
ONG30833
ONG30834
ONG30835
ONG30838
ONG30840
Blade 28”
Blade 30”
Blade 32”
Blade 33”
Blade 34”
Blade 35”
Blade 38”
Blade 40”
Marine Wipers
TYPE 223BD
2VBMJUZ.BSJOF&RVJQNFOU
Adjustable wiping arc from 40 to 90 in 5 increments. Standard
available for bulkhead thicknesses of 20, 35, 55 and 75mm. Brass
bearings. Designed for pantograph arms up to 750mm. Designed for
blades up to 800mm. Power consumption 36W, torque 23Nm.
EX2165.35
EX2166.35
250BS
Wiper motor, 65mm bulkhead thickness, 24V
232BD
250BS
Idler spindle / sleeve
5° increments
Wiper motor, 65mm bulkhead thickness, 12V
280BS
Technical specs
Insulated Earth Return
Yes
Adjustable
12 and 24wiping arc from 40 to 90 in 5 increments. Standard
Negative
Earth
No
PU Arms
available
23 Nmfor bulkhead thicknesses of 20, 35, 55, 75, 100 and 125mm.
Standard
Bulkhead
Thicknessthese
35,wiper
65 mm motors also
Like the
223-series,
Brass 36W
bearings. Designed for pantographMax.
arms
upExalto
to 750mm.
Designed
need
PU arms.
With
Armthe
Length
1000
mmthese stainless
Yes
for blades up to 800mm. Power consumption
75W,
12V,
torque
25Nm.
steel
316
arms,
you
can 1200
easily
adjust the
Max.
Blade
Length
mm
5, 75, 100, 125 mm
ments
EX2175.35
EX2176.35
Wiper motor, 55mm bulkhead thickness, 12V
Wiper motor, 55mm bulkhead thickness, 24V
WINDSHIELD
WASHER KIT
Complete with integral pump, nozzels,
mounting bracket and 1.5L bottle.
ONG31130
12V
ONG31131
24V
Electrical
249
Marine Wipers
PANTOGRAPH ARMS
2VBMJUZ.BSJOF&RVJQNFOU
Pantograph arms manufactured from stainless
steel, with brass heads. To prevent reflection,
a black coating is applied on all parts. The
position of the blade in relation with the
window configuration can be adjusted by the
swivelling blade clip. Centre distance 50mm.
Pantograph arms to suit the wipers type
235KG, 235KK, 215BD, 215BS, 223BD,
223BS, 225BD and 225BS. Adjustable in
length. Standard supplied with one spring with
fixed spring pressure.
EX2133
EX2136
Adjustable 270-450mm
Adjustable 450-600mm
Marine Wipers
ELECTRONIC
CONTROL PANELS
2VBMJUZ.BSJOF&RVJQNFOU
Electronic control of up to three or up to 5 Exalto wipers. Wipers
can be switched individually or in any combination. Offers
two continuous speeds, three step intermittent wipe and wipe/
wash feature. Please contact our Sales Department for more
information.
EX210312
EX210324
EX210512
EX210524
For up to 3 wipers, 12V
For up to 3 wipers, 24V
For up to 5 wipers, 12V
For up to 5 wipers, 24V
Marine Wipers
WIPER BLADES
2VBMJUZ.BSJOF&RVJQNFOU
Curved wiper blades have a stainless steel main
bridge, plastic bridges, stainless steel rivets and
natural rubber inserts. They have a low profile
to reduce lift and are screen friendly because of
the plastic bridges. In case of damaged rubber,
the plastic bridge will not damage the screen. To
prevent reflection, a black coating is applied on all
metal parts. All blades are supplied with a fixed
length. Blades of 610-800mm suit pantograph
arms with a narrow blade clip. Blades with a length
of 900mm or more suit pantograph arms with a
wide blade clip EX2142.B and EX2144.B .
EX2175
EX2177
EX2179
EX2196
EX216124
EX216130
500mm in length
600mm in length
Marine Wipers
ACCESSORIES
2VBMJUZ.BSJOF&RVJQNFOU
A variety of washing jets, reservoirs with pumps, solenoid valves,
couplings and tubing are available. Washing jets may be fitted to the
arms to enable proper window cleaning. This water can be supplied
from either a reservoir with built-in pump, a separate pump or the
fresh water pressure system on board, using a solenoid valve. When
using one of the Exalto switches, all the above mentioned options can
be controlled by the switch.
700mm in length
800mm in length
H.D.800 mm in length
H.D.1200mm in length
WIPER CONTROL BOX
1-3 motors 12-24V, max 5A/motor. Fits Ongaro motors. Rocker
switch included. With two motors connected it runs
Helm seat motor or both motors
Synchronized sweep
Interval, slow speed, fast speed
Washing system
ONG32003
%QNG*GTUGG%Q
%QNG*GTUGG%Q
/
WIPER SWITCHES
Marine Wipers
2VBMJUZ.BSJOF&RVJQNFOU
75228-03
EX2135
75600-04
EX2159
EX2159.01
Two speed switch for one wiper, 12/24V
Two speed switch for two wipers, 12/24V
Combination switch for one wiper, 12V
Combination switch for one wiper, 24V
Panel for combination switch
Switch is equipped with a two speed and self parking control
with a connection for a pump or solenoid
These switches incorporate an adjustable intermittent wipe,
two speed and self parking control, and have a connection
for a pump or solenoid
%QNG*GTUGG%Q
%QNG*GTUGG%Q
MICROPROCESSOR CONTROLLED
ELECTRONIC WIPER SWITCHES
For 12 VDC electrical systems. 4 positions Off/Park - Intermittent
Range - Low - High. Push knob to actuate washer pump circuit. For
negative ground permanent magnet wiper motors with or without
dynamic parking.
75600-04
75600-01
One motor
Two motors
250
Electrical
WIPER MOTOR SWITCH
3 position Contura rocker switch, controls 2 speed
motors. Fits in a standard rocker switch panel.
12/24VDC
ONG40400
The dual arm set-up of a pantographic arm allows a
flatter sweep pattern 304 stainless steel black powder
coated. Heavy duty spring. Easy to install. Replaces most
competitive arms.
ONG39152
ONG39153
ONG39154
ONG39155
STANDARD WIPER MOTOR
Black powder coated aluminum cover. 304 stainless steel mounting
plate, shaft and mounting hardware. Adjustable sweep 90 or 110 .
Adjustable park position right or left. Capable of handling up to a 14
arm and blade. Guaranteed three years. 12 volt, 3 amp.
ONG31011
ONG31001
ONG30100
ONG30511
ADJUSTABLE PARALLEL ARMS
18
22
304 stainless steel blue powder coated. Heavy duty stainless steel
spring. Will replace all competitive arms on HD motors.
Motor kit with 10-1/2-14 arm and 11 blade
Motor only, 2-1/2 shaft
10-1/2 -14 arm for 31001 motor
Replacement 11 blade
HEAVY DUTY TWO SPEED WIPER MOTOR
Black powder coated aluminum cover. 304 stainless steel mounting
plate, bracket and mounting hardware. 316 stainless steel shaft.
Chrome plated brass shaft housing. Adjustable sweep 45 , 60 , 80
and 110 . Adjustable park position right or left. Two speed motor.
20 stronger than competitive models. Capable of handling up to a 24
arm and 22 blade. Guaranteed three years.
DELUXE ULTRA HD
ADJUSTABLE ARMS
Adjustable 12 -18
Adjustable 19 -24
DELUXE ULTRA ADJUSTABLE
ARMS WITH ADJUSTABLE TIP
ONG39718
ONG39724
Adjustable 14 -19
Adjustable 19 -24
Motor only, 2-1/2 shaft, 12 volt, 5 amp
Motor only, 1-1/2 shaft, 12 volt, 5 amp
Motor only, 3-1/2 shaft, 12 volt, 5 amp
Motor only, 2-1/2 shaft, 24 volt, 2.5 amp
Rocker switch for heavy duty motor
Motor only, 1-1/2 shaft 24v 2.5amp
HEAVY DUTY W12
2 SPEED WATERPROOF WIPER MOTOR
Non-corrosive white poly waterproof housing
Chrome plated brass shaft housing
316 stainless steel shaft
Sweep adjustable at any angle from 45 to 110 deg.
Park position adjustable without removing the cover
Adjustable left or right
Will power up to a 24 arm & 22 blade
Guaranteed 3 years
ONG33511
ONG33512
ONG33521
ONG33522
ONG33531
ONG33532
14
DELUXE ULTRA HD ADJUSTABLE ARMS
ONG39617
ONG39624
ONG30991
ONG31991
ONG32991
ONG30992
ONG40400
ONG31992
11
1-1/2” shaft 12V
1-1/2” shaft 24V
2-1/2” shaft 12V
2-1/2” shaft 24V
3-1/2” shaft 12V
3-1/2” shaft 24V
DELUXE ULTRA ADJUSTABLE
PARALLEL ARMS
The dual arm set-up of a pantographic arm
allows a flatter sweep pattern.
ONG39818
ONG39824
Adjustable 14 -19
Adjustable 19 -24
DELUXE ULTRA BLADES
Powder coated. Natural rubber.
ONG30511
ONG30512
ONG30514
ONG30516
ONG30518
ONG30520
ONG30522
11
12
14
16
18
20
22
Electrical
251
HEAVY DUTY WIPER MOTOR
Fully sealed powder coated aluminum waterproof base and housing
Powers a 22 arm and blade combination
Factory pre-set sweep angles of 80 or 110 , adjustable to 45 or 60
Two speed motor
Adjustable right or left self parking
5/8 diameter shaft
3 year warranty
71011A
71012A
71081A
71082A
1-1/2 shaft with 110 sweep
2-1/2 shaft with 110 sweep
1-1/2 shaft with 80 sweep
2-1/2 shaft with 80 sweep
AFI-500 STANDARD WIPER KITS
The AFI self-parking AFI-500 waterproof wiper motor is totally sealed
and 100 waterproof. The motor housing is made of UV stabilized
high-temperature, high-impact thermoplastic. The 12V heavy duty
motor has a maximum draw of 2 amps. The 1/2 Dia. x 2-1/2 long
motor shaft is designed to be mounted on normal windshield frames.
Kit includes 11-1/2 deluxe curved blade 33004 and adjustable
6-3/4 to 10-1/2 stainless steel arm 33006
30004
30005
Kit 80 sweep
Kit 110 sweep
AFI-1000 HEAVY DUTY
WATERPROOF WIPER MOTOR
Powers 16 x 16 arm/blade combinations
Adjustable to 50 , 65 , 80 or 110
5/8 diameter shaft
Fully sealed waterproof housing made of UV stabilized, high
temperature, high-impact thermoplastic
Knurled drive shaft and solid brass arm drive nut
Adjustable right or left self parking
3 year warranty
36110
36180
37110
37180
1-1/2 shaft with 110 sweep
1-1/2 shaft with 80 sweep
2-1/2 shaft with 110 sweep
2-1/2 shaft with 80 sweep
WINDSHIELD WASHER KIT
Includes water tank, 12V pump motor, two thru-deck nozzles, tee fitting,
two spray nozzles, 16 of below deck clear plastic tubing and 6 of above
deck black tubing. Also includes 4 clips to attach tubing to the extension
portion of wiper arm and 4 clips to attach tubing to the main portion of
the arm. Each spray head has four adjustable nozzles. Spray nozzles
snap onto the end of the wiper arm providing complete spray coverage.
Water tank capacity 3 litres.
Water tank dimensions 9-1/4 H x 7 W x 4-1/2 D.
33505
STANDARD WIPER KITS
The AFI self-parking Standard wiper motor is only recomended for
installation in protected areas. The 12V heavy duty motor has a
maximum draw of 2 amps. The 3/8 Dia. x 2-1/2 long motor shaft is
designed to be mounted on normal windshield frames. Corrosionproof aluminium alloy case with black crackle finish
Kit includes 11-1/2 deluxe curved blade 33004 and adjustable
6-3/4 to 10-1/2 stainless steel arm 33006
32000
32002
32001
Kit 80 sweep
Kit 110 sweep
Kit 80 sweep, deck mount 3-1/2 Shaft
WMW STANDARD WIPER KITS
The AFI self-parking WMW is a water resistant wiper motor.
The motor housing is chrome plated brass. The 12V heavy duty
motor has a maximum draw of 2 amps. The 3/8 Dia. x 2-1/2
long motor shaft is designed to be mounted on normal windshield
frames.
Kit includes 11-1/2 deluxe curved blade 33004 and adjustable
6-3/4 to 10-1/2 stainless steel arm 33006
30000
30002
Kit 80 Sweep
Kit 110 Sweep
252
Electrical
STANDARD ADJUSTABLE ARM
For use with motors with 1/4 smooth drive shaft.
All stainless steel construction
33020
10 to 14
DELUXE ADJUSTABLE ARM
Stainless steel. Motor shaft mounting has additional set screw clamping
For motors with spline drive shafts.
33006
33007
33010
33012
33014
6-3/4 to 10-1 /2 with adaptor for 1/4 smooth shafts
10 to 14
14 to 20
10 to 14 black
14 to 20 black
DELUXE ADJUSTABLE PANTOGRAPHIC ARM
The dual arm set-up of a pantographic arm allows a flatter sweep pattern
Stainless steel, black.For motors with spline drive shafts.
33032A 12
33037 17
to 17
to 22
PREMIER STAINLESS STEEL
ADJUSTABLE ARMS
Motor shaft mount with setscrew provides for secure installation and
operation. Heavy duty construction provides the strength to drive larger
wiper blades. Riveted tip for extra strength. For motors with spline drive
shafts.
33082
33084
33086
33084W
33086W
10 to 15
15 to 20
20 to 25
Stainless steel. Works well on curved or flat windshields.
33004
33005
33015
33016A
33017A
11 Blade
14 Blade
16 Blade
18 Blade
20 Blade
POLYMER WIPER BLADE
Silver or black poly, glass-impregnated
construction. Marine-grade rubber squeegee.
Black
Silver
31012B
N/A
31014B
N/A
31016B 31016S
31018B 31018S
31020B 31020S
31022B
N/A
31024B
N/A
Length
12 Blade
14 Blade
16 Blade
18 Blade
20 Blade
22 Blade
24 Blade
SLIP ON HINGE STYLE BLADES & ARMS
Stamped 304 Stainless/Lexan Blades.
Blades & arms also fits AFI standard arms & motors.
411151 11 Blade
411154 14 Blade
410051 8 -12 Arm
410054 9-1/4 - 13-1/4
Arm
15 to 20 with spray nozzle
20 to 25 with spray nozzle
PREMIER STAINLESS STEEL
PANTOGRAPHIC ADJUSTABLE ARMS
High quality stainless steel construction, with chrome-plated solid brass
motor shaft mount. The dual arm set-up of a pantographic arm allows a
flatter sweep pattern, which provides greater coverage in a side-to-side
pattern. Adjustable length is secured with stainless steel screws. Riveted
tip for extra strength. For motors with spline drive shafts.
33090
33092
33094
33096
33090W
33092W
33094W
33096W
DELUXE CURVED BLADE
12 to 17
17 to 22
22 to 26
26 to 30
12 to 17 with spray nozzle
17 to 22 with spray nozzle
22 to 26 with spray nozzle
26 to 30 with spray nozzle
SELF-PARKING
WINDSHIELD WIPER KITS
Stamped 304 Stainless Cover . 12VDC.
Matte black crackle non-reflective finish
410710 Motor only, black
410711 Motor w/ 11 blade & 8-1/2
S/S arm
Polished stainless steel cover
410810 Motor only, SS
410811 Motor w/ 11 blade & 8-1/2
S/S arm
REMOVABLE MANUAL
WINDSHIELD WIPER
Injected molded nylon/formed 304 stainless.
Removable in seconds. Includes 11 blade.
412605
CLASSIC STRAIGHT BLADE
Stainless steel
Hook and catch” style as opposed to the slide and lock”
33901
33919
11 Blade, hook & catch
14 Blade, hook & catch
HAND WINDSHIELD WIPER
Chrome plated brass with a Stainless steel
arm. Comes with blade and arm.
412601
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement