Craftsman | 973.112090 | Operator`s manual | Craftsman 973.112090 Operator`s manual

Operator's Manual
II:RRFTSMRN'I
2.4 VOLT CORDLESS SCREWDRIVER
Single Speed / Reversible
Model No.
973.112090
Save this manual
future reference
for
• Safety
• Features
CAUTION:
Read and follow all
Safety Rules and Operating Instructions
before first use of this product.
Customer
Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman
Visil the Craftsman web page: www.sears.com/craftsman
983000-004
2-02
• Operation
• Maintenance
• Parts List
Estates,
IL 60179
USA
•
Table Of Contents ..........................................................................................................................................................
2
•
Warranty .........................................................................................................................................................................
2
•
GeneralSafety
•
Features .........................................................................................................................................................................
•
Operation ....................................................................................................................................................................
•
Maintenance
•
Battery Removal ...........................................................................................................................................................
10
•
Accessodes ..................................................................................................................................................................
t0
•
Exploded View And Repair Parts List ..........................................................................................................................
11
•
Parts Ordering / Service ...............................................................................................................................................
12
Rules, Specific Safety Rules, And Symbols ......................................................................................
3-6
7
8-9
...................................................................................................................................................................
9:
WARRANTY
FULL ONE YEAR WARRANTY
ON CItRFTSMI_#
CORDLESS
SCREWDRIVER
If this CRRFTSMRN Screwdriver fails to give complete satisfaction within one year from the date of purchase, RETURN IT
TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will replace
it, free of charge.
If this I:RRFTSNR# Screwdriver is used for commercial or rental purposes, this warranty applies for only 90 days from the
date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA,
A
_i
Hoffman Estates, IL 60179
Look for this symbol to point out important safety precautions. It means attention!!! Your safety is
involved.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and a full face shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sear_
Retail Stores. Always wear eye protection which is marked to comply with ANSI Z87.1.
SAFETY AND INTERNATIONAL
SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.
MEANING
Do not expose to rain or use in.damp locations.
2.
A
Personal
WARNING: Read and understand all instructions.
Failureto followall instructionslistedbelow,may
resultin electdcshock,fire and/or seriouspersonal
injury.
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious
personal injury.
•
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
•
Avoid accidental starting. Be sure switch is in the
locked or off position before inserting battery
pack. Carrying tools with your finger on the switch or
inserting the battery pack into a tool with the switch on,
invites accidents.
•
Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached
to a rotating part of the toot may result in personal
injury.
•
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations. Do
not use on a ladder or unstable support.
•
Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
SAVE THESE INSTRUCTIONS
Work Area
•
Keep your work area clean and well lit. Cluttered
benchesand dark areas inviteaccidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
•
Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you
to lose control.
Electrical
•
•
•
Safety
Do not abuse the cord. Never use the cord to carry
the charger. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords
immediately. Damaged cords may create a fire.
A battery operated tool with integral batteries or a
separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a
risk of fire when used with another battery. Use battery
only with charger listed.
• ODEL
CHARGER
973.112090
7221801
Use battery operated tool only with specifically
designated battery pack. Use of any other batteries
may create a risk of fire. Use only with battery pack
listed.
3
Safety
Tool Use and Care
•
Ii
•
•
•
•
Use clamps or other practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and
may lead to loss of control.
Do not force tool. Use the correct tool for your
application. The correct tool wUldo the job better and
safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or off.
A tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect battery pack from tool or place the
switch in the locked or off position before making
any adjustments, changing accessories, or storing
the tool. Such preventive safety measures reduce risk
of starting the tool accidentally.
Store idle tools out of reach of children and other
untrained parsons. Tools are dangerous in the hands
of untrained users.
•
Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools, with sharp
cutting edges are less likely to bind and are easier to
control.
•
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool, may create a risk of injury
when used on another tool.
•
Service
Tool service must be performed only by qualified
repair personnel Service or maintenance performed
by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
dsk of shock or injury.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
sparks, burns, or a fire.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Additional
•
•
•
fire or heat. This will reduce the dsk of explosion and
possible injury.
For Safe Operation
Know your power tool. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to
this tool. Following this rule wilLreduce the risk of
electric shock, fire, or serious injury.
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. A wire gage size (A.W.G.) of at least 16 is
recommended for an extension cord 100 feet or less
in length. A cord exceeding 100 feet is not recommended. If in doubt, use the next heavier gage. The
smaller the gage number, the heavier the cord. An
undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
Important
•
Rules
Rules for Battery
Tools
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing accessories. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury.
Do not place battery tools or their batteries near
_1+ WARNING: Batteries vent hydrogen gas and can
explode in the presence of a source of ignition, such as
a pilot light To reduce the dsk of sedous injury, never
use any cordless product in the presence of open
flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
•
Do not charge battery tool in a damp or wet
location. Following this rule will reduce the risk ot
electric shock, fire, or serious personal injury.
•
For best results, your battery tool should be
charged in a location where the temperature is
more than 50°F but less than 100°F. Do not store
outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Following this rule will
reduce the risk of serious personal injury.
_k, WARNING:
A damaged battery is subject to
explosion. To avoid serious personal injury, properly
dispose of a damaged battery.
•
Do not operate charger with a damaged cord or
plug. If damaged, have replaced immediately by a
qualified serviceman. Following this rule will reduce the
risk of eloctdc shock, fire, or serious personal injury.
II
Save these instructions. This manual contains
important safety and operating instructions for
charger part number 7221801. Following this rule
will reduce the risk of electric shock, fire, or serious
personal injury.
•
II
Before using battery charger, read all instructions
and cautionary markings in this manual, on
battery charger, and product using battery
charger. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
•
Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman. Following
this rule will reduce the risk of electric shock, fire, or
serious personal injury.
Do not disassemble charger; take it to a qualified
serviceman when service or repair is required.
Incon_ct reassembly may result in a risk of electric
shock or fire. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
_IL CAUTION: To reduce risk of injury, charge only
nickel-cadmium and nickel metal hydride type
rechargeabie batteries. Other types of batteries
may burst causing personal injury and damage.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
Do not expose charger to rain or snow. Following
this ruJe will reduce the dsk of electric shock, fire, or
serious personal injury.
III Use of an attachment not recommended or sold
•
To reduce the risk of electric shock, unplug
charger from outlet before attempting any maintenance or cleaning. Turning off controls will not
reduce this risk. Following this rule will reduce the
risk of electric shock, fire, or sedous personal injury.
•
Do not use charger outdoors. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
Disconnect charger from power supply when not
in use. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
II
•
by the battery charger manufacturer may result in
a risk of fire, electric shock, or injury to persons.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
II
_k
Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected
to damage or stress. Following this rule will reduce
the risk of serious personal injury.
II
An extension cord should not be used unless
absolutely necessary. Use of improper extension
cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the
same number, size and shape as those of
plug on charger.
Cord Size (AWG)
16
Note: AWG -- American
100'
16
16
•
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them
these instructions also. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
_.
WARNING:
Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemicallytreated lumber.
c. That wire size is large enough for AC ampere
rating of charger as specified below:
50'
SHOCK. DO NOT
• lead from lead-based paints,
b. That extension cord is property wired and in
good electrical condition; and
Cord Length (Feet) 25'
RISK OF ELECTRIC
TERMINAL.
To reduce risk of damage to charger body and
cord, pull by charger plug rather than cord when
disconnecting charger. Following this rule will
reduce the risk of serious personal injury.
II
DANGER:
TOUCH UNINSULATED PORTION OF OUTPUT
CONNECTOR OR UNINSULATED BA'I-rERY
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Wire Gage
SAVE THESE INSTRUCTIONS
5
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
min
Minutes
Time
Alternating
Current
Type or a characteristic
of current
of current
--'=-
Direct Current
Type or a characteristic
no
No Load Speed
Rotational speed, at no load
.../rain
Revolutions or Reciprocation
Safety Alert Symbol
Per Minute
Revolutions, strokes,
surface speed, orbits etc. per minute
Indicates danger, warning or caution.
It means attention!!! Your safety is
involved.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and
the explanations with them, deserve your careful attention and understanding. The safety warnings do
not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for
proper accident prevention measures.
SYMBOL
MEANING
SAFETY ALERT SYMBOL:
Indicatesdanger, warning,or caution. May be used in conjunctionwithother symbols or pictographs.
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
WARNING:
Failure to obey a safety warning can result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
A
NOTE:
CAUTION:
Failure to obey a safety warning may result in property damage or personal injury to
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock
and personal injury.
Advises you of information or instructions vital to the operation or maintenance
of the equipment.
_NOWYOUR
See Figure
SCREWDRIVER
,_
1.
_efore attempting to use your screwdriver, familiarize
fourself with all operating features and safety
_equirements.
WARNING:
Do not allow familiarity with your screwdriver to make you careless. Remember that a careless
fraction of a second is sufficient to inflictsevere injury.
PRODUCT
SPECIFICATIONS"
SCREWDRIVER
I_
:
i
WARNING: Carefully read throughthis entire
operator'smanualbefore usingyournew screwdriver.
Pay close attention to the Rules For Safe Operation,
Wamings and Cautions. If you use your screwdriver
properly and only for what it is intended, you will enjoy
years of safe, reliable service.
973.112090
Collet
1/4 in.
Motor
2.4 Volt DC
Switch
No Load Speed
Single Speed / Reversible
150 RPM
30 in./Ibs
Maximum Torque
CHARGER
i_1 WARNING: If any parts are missing, do not operate
your screwdriver until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
Charger Rating
Part No. 7221801
120 Volts, 60 Hz, AC only
2.4 Volt
Charger Voltage
3 - 5 Hours
Charger Rate
SWITCH
Your screwdriver is equipped with a rocker type switch
which turns your screwddver ON and OFF. This switch
:lisa controls the forward and reverse feature. For driving
ycrews, depress right side of switch. For removing screws,
_epress left side of switch.
SWITCH(ON/ OFF)
(FORWARD/ REVERSE)
FORWARD
INPUT
JACK
TORQUE
ADJUSTMENTCAP
REVERSE
\
COLLET
Fig. 1
7
,_
WARNING:
Always wear safety goggles or safety
glasses with side shields when operating tools.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible sedous injury.
CHARGING
CHARGER
YOUR SCREWDRIVER
This tool has been shipped in a low charge condition to
prevent possible problems. Therefore, you should charge it
overnight prior to use.
CHARGERPLUG
Note: Batteries will not reach full charge the first time they
are charged. Allow several cycles (driving screws followed
by recharging) for them to become fully charged.
If the charger does not charge your screwdriver
under
normal circumstances,
return both the screwdriver and
charger to your nearest Sears Service Center for electrical
check.
INPUT JACK
TO CHARGE
•
Insert charger plug into input jack making sure they
are properly connected.
•
Charger can be used with normal household
voltage of 120 volts, 60 Hz, AC only,
•
Connect charger to power supply.
•
After normal usage, a minimum of 3-5 hours of charging time is required to fully recharge batteries.
Note: If batteries are fully discharged, 10 to 12 hours
of charging time is required to fully recharge them.
•
Do not place charger in an area of extreme heat or
cold. It will work best at normal room temperature.
COLLET
The collet on your screwdriver has been designed to accept
1/4 in. hex bits. See Figure 3
TO INSERT
BIT
See Figure 3
Insert bit into co]let as far as possible.
Note: One bit is packed with your screwdriver.
Fig. ,_
"ADJUSTABLE
TORQUE
CLUTCH
(Tightening Power of Your Screwdriver)
See Figure 4.
'When usingyour screwdriver for various driving applications,
_t becomes necessary to increase or decrease the power
and torque in order to help prevent the possibility of
damaging screwheads, threads, workpiece, etc. In general,
TO
INCREASETORQUE ARROW
power and torque should correspond to the difficulty of the
_erew to be driven. It torque is too high the screws may be
damaged or broken.
Note: Your screwdriver
has been shipped with the
adjustable torque clutch set at the lowest torque setting.
TORQUE
ADJUSTMENT
CAP
TO ADJUST TORQUE
_ee Figure4.
•
Locate arrow on front of housing.
II
Identify the twenty two torque indicator settings located
on torque adjustment cap.
II
Rotate adjustment cap to desired setting aligning number on adjustment cap with arrow on housing.
I
To increase or decrease torque, rotate torque adjustment cap in the direction of the arrows as shown in
Figure 4.
TO
DECREASE
TORQUE
Fig. 4
BATFERIES
your screwdriver iS equipped with 2 nickel-cadmium
if'echargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
•
stere and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery life.
"_he batteries in this tool have been designed to provide
(_aximum trouble free life. However, like all batteries, they
will eventually wear out. To remove batteries, follow
BATTERY REMOVAL instructions. Handling of these
Uatteries, especially when wearing rings and jewelry,
could result in a serious burn.
•
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
•
All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge. If
you store your tool for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery life.
-f'o obtain the longest possible battery life, we suggest the
_Collowing:
_k WARNING:
When servicing, use only identicat
Craftsman
replacement parts. Use of any other
part may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
_lastics are susceptible to damage from various types of
_ommercial solvents and may be damaged by their use.
(,Jseclean cloths to remove dirt, dust, oil, grease, etc.
:_k WARNING:
Do not at any time let brake fluids,
gasorine, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy
piastic.
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
Only the parts shown on parts list, page 11, are intended
to be repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
_k
WARNING:
Do not attempt to modify this tool or
create accessories not recommended for usa with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
Topreserve
natural
resources,
please
recycle
ordispose
of batteries
properly.
Thisproduct
contains
nickel-cadmium
COVER
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.
SCREW(S)
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BA'n'ERY
CLING
REMOVAL,
PREPARATION
FOR RECY-
See Figure 5.
BATTERIES
TO REMOVE:
•
•
Remove the four screws securing motor housing
cover, then remove cover.
TERMINAL
BATTERY
TERMINAL
Lift batteries from motor housing enough to expose
leads and battery terminals. Disconnect leads from
battery terminals. Note: Be careful not to break
battery terminals when disconnecting leads.
_1= WARNING:
Upon removal, cover the battery
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble batteries or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
The following recommended accessories
•
No. 2 Phillips / 8-10 Slotted, 2 Ea.
LEADS
MOTOR
HOUSING
are currently available at Sears Retail Stores.
•
7-Pc. Screwdriver Bit Set and Case
•
NO. 3 Phillips / 6-8 Slotted, 2 Ea.
•
13-Pc. Power Screwdriver/Nutdriver
Set and Case
•
5-Pc. Hex Shank Drill Bit Set
•
17-Pc. Power Screwdriver/Nutdriver
Set and Case
•
6-Pc. Extra Length Magnite Power Bit Set
•
30-Pc. Power Screwdriver/Nutdriver
Set and Case
,_
WARNING:
The use of attachments
or accessories
not listed might be hazardous.
10
CRAFTSMAN
!
2.4 VOLT CORDLESS SCREWDRIVER
MODEL NO. 973.112090
The model number will be found on a plate attached to the motor housing. Always mention the model number
in all correspondence regarding your CORDLESS SCREWDRIVER or when ordering repair parts.
SEE BACK PAGE FOR PARTS ORDERING
INSTRUCTIONS
PARTS LIST
Key
No.
PaN
Number
Description
1
7221801
Charger .............................................................................
983000-004
Operator's Manual
Quan.
11
1
I
For repair of major brand appliances in your own home...
no matter who made it, no matter who sold it!
1-800-4-MY-HOME
sMAnytime,
day or night
(1-800-469-4683)
www.sears.com
To bring in products such as vacuums, lawn equipment and electronics
for repair, call for the location of your nearest Sears Parts & Repair Center.
1-800-488-1222
Anytime, day or night
www.sears.com
For the replacement parts, accessories and owner's manuals
that you need to do-it-yourself, call Sears PartsDirectSM!
1-800-366-PART
(1-800-366-7278)
6 a.m.-
11 p.m. CST,
7 days a week
www.sears.com/partsdirect
To purchase or inquire about a Sears Service Agreement:
1-800-827-6655
7 a.m. - 5 p.m. CST, Mon. - Sat.
Para pedir servicio de reparaci6n a domicilio,
y para ordenar piezas con entrega a domicilio:
1-888-SU-HOGAR
s_
(1-888-784-6427)
Au Canada pour service en frangais:
1-877-LE-FOYER s"
(1-877-533-6937)
SEARS 1
H°meCentral_ J
® Registered
© Sears,
Roebuck
and Co.
® Marca
Trademark
Registrada
/
/ T_ Marca
Trademark
of Sears,
de F_lbrica de Sears;,
Roebuck
Roebuck
and Co.
and Co.
Download PDF

advertising