JVC HR-S S2110T, S6700KR, S7800U, S7800U(C) Video Cassette Recorder Service Manual
HR-S2110T/S6700KR/S7800U/U(C) are video cassette recorders that offer various features. You can record and play back VHS and S-VHS tapes, with a maximum recording time of 630 minutes in EP mode. The VCR also has an integrated tuner, which allows you to record TV programs directly to the tape.
Advertisement
Advertisement
SERVICE MANUAL
VIDEO CASSETTE RECORDER
HR-S2110T/S6700KR/S7800U/U(C)
TV
CABLE/
DBS
MBR SET
A/B
POWER
TV/VCR A. MONITOR DISPLAY
1
4
DBS
7
C.RESET
CANCEL
2
5
DAILY(M-F)
8
AUX
0
3
6
WEEKLY
9
2
TIMER 4
START STOP DATE CH
1 PROG
EXPRESS PROGRAMMING
PROG
CHECK
SP/EP SKIP SEARCH
PLAY
REW
FF
REC
STOP PAUSE
MENU
TV CH +
3 OK
V
O
L
–
SHUTTLE
PLUS
TV CH –
TV
V
O
MULTI BRAND
REMOTE CONTROL UNIT
POWER
S-VIDEO VIDEO (MONO)L—AUDIO—R
DIGITAL TBC/NR
S-VHS ET
SP EP
VCR
MENU
REW
PLAY
FF
CH
OK
REC STOP/EJECT PAUSE
Regarding service information other than these sections, refer to the HR-S4800U service manual (No. 82792).
Also, be sure to note important safety precautions provided in the service manual.
SPECIFICATIONS
(The specifications shown pertain specifically to the model HR-S7800U)
GENERAL
Power requirement
Power consumption
Power on
Power off
: AC 120 V` , 60 Hz
: 20 W
: 2.5 W
Temperature
Operating
Storage
Operating position
: 5°C to 40°C (41°F to 104°F)
: –20°C to 60°C (–4°F to140°F)
: Horizontal only
Dimensions (W x H x D) : 400 mm x 94 mm x 281 mm
Weight
Format
Maximum recording time
(15-3/4" x 3-3/4" x 11-1/8")
: 3.5 kg (7.7 lbs)
: S-VHS/VHS NTSC standard
SP
EP
: 210 min. with ST-210 video cassette
: 630 min. with ST-210 video cassette
TUNER
Tuning system
Channel coverage
VHF
UHF
CATV
RF output
TIMER
Clock reference
Program capacity
Memory backup time
: Frequency-synthesized tuner
: Channels 2–13
: Channels 14–69
: 113 Channels
: Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75
Ω, unbalanced
: Quartz
: 1-year programmable timer/
8 programs
: Approx. 3 min.
VIDEO/AUDIO
Signal system
Recording/
Playback system
: NTSC-type color signal and EIA monochrome signal, 525 lines/60 fields
: DA-4 (Double Azimuth) head helical scan system
: 45 dB
ACCESSORIES
Provided accessories : Infrared remote control unit,
“AA” battery x 2,
Audio/video cable,
RF cable (F-type),
S-video cable (4-pin),
S-VHS ET labels,
Controller
Signal-to-noise ratio
Horizontal resolution
VHS
S-VHS
Frequency range
Normal audio
Hi-Fi audio
Input/Output
: 230 lines
: 400 lines
: 70 Hz to 10,000 Hz
: 20 Hz to 20,000 Hz
: RCA connectors (IN x 2, OUT x 1)
S-video connectors (IN x 2, OUT x 1)
Specifications shown are for SP mode unless specified otherwise.
E. & O.E. Design and specifications subject to change without notice.
This service manual is made from all recycled paper.
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.
No. 82806
May 2000
TABLE OF CONTENTS
DIFFERENT TABLE .................................................................................................................................................................................... 1 to 5
3. ELECTRICAL ADJUSTMENT (3-1 to 3-7)
3.1
PRECAUTION ........................................................................................................................................................................................ 3-1
3.2
SERVO CIRCUIT ................................................................................................................................................................................... 3-2
3.3
VIDEO CIRCUIT .................................................................................................................................................................................... 3-2
3.4
AUDIO CIRCUIT .................................................................................................................................................................................... 3-4
3.5 DEMODULATOR CIRCUIT .................................................................................................................................................................... 3-5
3.6
SYSCON CIRCUIT ................................................................................................................................................................................ 3-7
4. CHARTS AND DIAGRAM (4-1 to 4-12)
4.1
BOARD INTERCONNECTIONS ............................................................................................................................................................ 4-1
4.2
3D DIGITAL/2M SCHEMATIC DIAGRAM .............................................................................................................................................. 4-3
4.3
DEMODULATOR SCHEMATIC DIAGRAM [HR-S6700KR] ................................................................................................................... 4-5
4.4
MAIN,A/C HEAD, S JACK, R.PAUSE, C.BOX AND LOADING MOTOR CIRCUIT BOARDS ............................................................... 4-7
4.5
3D DIGITAL/2M CIRCUIT BOARD ...................................................................................................................................................... 4-10
4.6
DEMODULATOR CIRCUIT BOARD [HR-S6700KR] ........................................................................................................................... 4-11
4.7
REMOTE CONTROL SCHEMATIC DIAGRAM [HR-S2110T/S6700KR] ............................................................................................. 4-12
5. PARTS LIST (5-1 to 5-4)
5.1
CABINET AND CHASSIS ASSEMBLY <M2> ........................................................................................................................................ 5-1
5.2
ELECTRICAL PARTS LIST .................................................................................................................................................................... 5-3
The following table indicate main different points between models HR-S4800U, HR-S7800U, HR-S7800U(C), HR-S6700KR and HR-S2110T.
MODEL
ITEM
JOG/SHUTTLE DIAL ON DECK
POWER VOLTAGE (RATING)
POWER PLUG
POWER SAVE
FRONT PANEL COLOR
HEAD CLEANER
RECORDING & PLAYBACK SPEED
DIGITAL 3R
TBC
3D-MEMORY
STEREO DECODER
RF OUT CH
SUMMER TIME ADJ.
CHILD LOCK
VCR PLUS+
AUTO CLOCK
JUST CLOCK
CABLE & DBS BOX CONTROL
HR-S4800U
SH/PLAY
120V,60Hz
UL,CSA
USED
BLACK
NOT USED
REC: SP/EP,
PLAY: SP/LP/EP
NOT USED
NOT USED
NOT USED
MTS
[3CH],4CH
USED
USED
VCR+C3
USED
USED
USED
HR-S7800U
USED
USED
USED
HR-S7800U(C) HR-S6700KR
J/S
110`220V(60Hz)
KOREAN
NOT USED
CHMP
USED
SP/EP
A2(KOREAN)
NOT USED
NOT USED
G-CODE
NOT USED
NOT USED
NOT USED
HR-S2110T
SASO
MTS
13CH
Notes : Mark is same as left.
Mark — is not used.
1
The following table indicate different parts number between models HR-S4800U, HR-S7800U, HR-S7800U(C), HR-S6700KR and HR-S2110T.
PACKING AND ACCESSORY ASSEMBLY <M1>
REF.
NO.
301
306
306A
!310
!310
!310
!310
313
314
315
316
317
319
320
323
ITEM
MODEL
HR-S4800U
PACKING CASE LP30658-013A
REMOTE CONTROLLER LP20303-015A
COVER(BATTERY) LP40225-002A
INST.BOOK(EN)
INST.BOOK(FR)
INST.BOOK(KO)
INST.BOOK(EN.CH)
A/V CABLE
S CABLE
CONTROLLER
LPT0348-001A
—
—
—
PEAC0359-120
QAM0004-002
QAL0095-005
WARRANTY CARD
Q.S.SHEET
REGIST.CARD
SER.NET CARD
CONNECTION SHEET
—
LPT0348-002A
BT-51020-2
—
—
HR-S7800U
LP30658-022A
LPT0349-001A
—
—
—
—
LPT0349-002A
—
—
HR-S7800U(C)
—
LPT0349-003A
—
—
BT-52004-1
—
BT-20071B
PU36560
HR-S6700KR
LP30658-026A
LP20878-004B
LP40610-002A
—
—
LPT0430-001A
—
—
QAM0246-002
—
BT-56009-2M
—
—
—
—
HR-S2110T
LP30658-029A
—
—
—
LPT0429-001A
—
—
—
—
—
—
—
CABINET AND CHASSIS ASSEMBLY <M2>
REF.
NO.
ITEM
MODEL
HR-S4800U
!501
501A
527
528
529
530
533
FRONT PANEL ASSY
CASSETTE DOOR
501C DISPLAY WINDOW
!502
TOP COVER
TAP SCREW 503
!511
!517
518
518A
BOTTOM CHASSIS
POWER CORD
CLEANER ASSY
CLEANER ROLLER
518B CLEANER
518C CLEANER ARM
WASHER,DRUM
SPACER,DRUM
KNOB(JOG)
KNOB(SHUTTLE)
LP10289-019B
LP20868-005A
LP20869-023A
LP10013-021D
QYTDSF3010M
LP10108-012B
QMPD190-170-K
—
—
—
—
QYWW267505Z
LP30017-21A
LP30653-001A
LP30652-001A
SPACER, SHIELD FRAME
*LP30002-088A
HR-S7800U
LP10289-020C
LP20869-024A
—
—
—
—
HR-S7800U(C)
—
—
—
—
HR-S6700KR
LP10289-039B
LP20868-017A
LP20869-052A
LP10013-031C
QYTDSF3010R
LP10108-016A
PQ21730N
LP40369-001D
PQ46418-1-2
PQ46419-1-2
LP30407-001D
—
—
LP30651-004A
LP30652-002A
HR-S2110T
LP10289-042B
LP20869-060A
QMP73J0-170
—
—
Notes : Mark is same as left.
Mark — is not used.
Mark * HR-S4800U was also changed.
2
MAIN BOARD ASSEMBLY <03>
REF.
NO.
ITEM
MODEL
PW1 MAIN BOARD ASSY
IC3001 IC
IC3004 IC
IC5101 IC
Q6030 TRANSISTOR
Q6551 TRANSISTOR
Q7201 TRANSISTOR
D6551 Z DIODE
D7005 SI DIODE
D7010 LED
R31 MG RESISTOR
R46
R75
MG RESISTOR
MG RESISTOR
R111 MG RESISTOR
R3029 MG RESISTOR
R3032 MG RESISTOR
R3045 MG RESISTOR
R3093 MG RESISTOR
R5001 RESISTOR
R5102 RESISTOR
R5104 OMF RESISTOR
R5306 MG RESISTOR
R6030 MG RESISTOR
R6032 MG RESISTOR
R6053 MG RESISTOR
R6508 MG RESISTOR
R6509 MG RESISTOR
R6510 MG RESISTOR
R6511 MG RESISTOR
R6551 MG RESISTOR
R6552 MG RESISTOR
R7041 MG RESISTOR
R7202 RESISTOR
R7203 MG RESISTOR
R7204 RESISTOR
C18 E CAPACITOR
C63 CAPACITOR
C128 MG RESISTOR
C561 E CAPACITOR
C3018 TRIM CAPACITOR
C3019 CAPACITOR
C5004 CAPACITOR
C5006 E CAPACITOR
C5102 E CAPACITOR
C5103 CAPACITOR
C5304 MF CAPACITOR
C5310 M CAPACITOR
C6519 CAPACITOR
C6520 CAPACITOR
C7206 E CAPACITOR
L7201 P COIL
X3002 CRYSTAL
S6050 SLIDE SWITCH
!PC5101 IC(PHOTO COUPLER)
TU6001 TUNER
!TB1
TERMINAL BOARD
FW3002 PARA RIBON WIRE
J7101 PIN JACK
!SG5001 SURGE ABSORBER
!VA5001 VARISTOR
!VA5002 VARISTOR
!VA5003 VARISTOR
!F5001
FUSE
HR-S4800U
LPA10089-01B1
MN101D02HJP
M24C04-BN6
STR-G6532
—
2SC1740S/QRS/-T
2SA720/RS/-T
MTZJ10B-T2
—
—
NRSA02J-152X
NRSA02J-471X
—
NRSA02J-222X
—
—
—
—
QRZ9046-475Z
QRE141J-300Y
QRG02GJ-683
NRSA02J-563X
—
NRSA02J-123X
NRSA02J-102X
NRSA02J-0R0X
—
NRSA02J-0R0X
—
NRSA02J-271X
NRSA02J-101X
—
QRE141J-471Y
NRSA02J-222X
QRE123J-100X
QEKJ1HM-105
NCB21EK-104X
NRSA02J-0R0X
—
—
NDC21HJ-180X
QCZ9094-472
QETM2DM-157
QEMT1VM-276
QCZ0302-470Z
QFVF1HJ-124Z
QFLC1HJ-183Z
—
—
QEKJ0JM-227Z
QQL29BJ-101Z
—
QSW0460-001
PS2501-1
QAU0163-001
LP20887-002B
QUM022-30A4A4
QNN0288-001
QAF0046-242Z
QAF0023-431Z
QAF0023-431Z
—
QMF51N2-1R25J1
HR-S7800U
LPA10089-06B1
MN101D02HAA
M24C08-BN6
—
1SS133-T2
SLR-325MC-T
NRSA02J-122X
NRSA02J-271X
NRSA02J-225X
—
NRSA02J-0R0X
NRSA02J-0R0X
NRSA02J-102X
NRSA02J-0R0X
—
—
—
NRSA02J-331X
—
NCB21EK-473X
—
QERF1HM-105Z
—
—
—
—
—
HR-S7800U(C) HR-S6700KR
LPA10089-08B1
HR-S2110T
LPA10089-13A1
—
STR-G6551
2SB1218A/QR/-X
—
—
—
STR-G6532
—
2SC1740S/QRS/-T
—
MTZJ10B-T2
—
—
—
—
—
—
—
—
—
—
—
— —
—
QRE141J-100Y
QRG02GJ-473
NRSA02J-823X
NRSA02J-332X
—
NRSA02J-682X
NRSA02J-682X
NRSA02J-682X
NRSA02J-682X
—
—
—
—
—
—
—
—
QRE141J-300Y
QRG02GJ-683
NRSA02J-563X
—
NRSA02J-123X
—
NRSA02J-0R0X
—
NRSA02J-0R0X
—
NRSA02J-271X
NRSA02J-101X
—
—
—
—
NRSA02J-0R0X
QAT3725-300Z
NDC21HJ-100X
QCZ9071-222
QEZ0374-826 QETM2DM-157
QEMU1VM-276Z QEMT1VM-276
QCZ0302-330Z
QFVF1HJ-224Z
QCZ0302-470Z
QFVF1HJ-124Z
—
NCB21EK-223X
NCB21EK-223X
—
—
QAX0445-001
QFLC1HJ-183Z
—
—
—
—
—
PS2561L1-1/WL/
QAU0125-001
LP20887-006A
—
QNN0288-002
—
QAU0177-001
LP20887-007A
—
—
—
QAF0026-621
QMF51E2-2R0
—
—
—
—
Notes : Mark is same as left.
Mark — is not used.
3
2D DIGITAL BOARD ASSEMBLY <05>
REF.
NO.
PW1
MODEL
ITEM
2D DIGITAL BOARD ASSY
HR-S4800U
LPA10090-01B
HR-S7800U
—
HR-S7800U(C)
—
HR-S6700KR
—
HR-S2110T
—
3D DIGITAL/2M BOARD ASSEMBLY <05>
REF.
NO.
PW1
MODEL
ITEM
3D DIGITAL/2M BOARD ASSY
HR-S4800U
—
HR-S7800U
LPA10105-02A
HR-S7800U(C) HR-S6700KR HR-S2110T
R.PAUSE BOARD ASSEMBLY <06>
REF.
NO.
PW2
MODEL
ITEM
HR-S4800U
R.PAUSE BOARD ASSY LPA10089-01B2
HR-S7800U
LPA10089-01C2
HR-S7800U(C) HR-S6700KR HR-S2110T
DEMOD BOARD ASSEMBLY <14>
REF.
NO.
ITEM
MODEL
PW1 DEMOD BOARD ASSY
IC1501 IC
Q1501 TRANSISTOR
Q1502 DIGI TRANSISTOR
R1501 MG RESISTOR
R1502 MG RESISTOR
R1503 MG RESISTOR
R1504 MG RESISTOR
R1505 MG RESISTOR
R1506 MG RESISTOR
R1507 MG RESISTOR
R1508 MG RESISTOR
R1509 MG RESISTOR
R1510 MG RESISTOR
R1511 MG RESISTOR
R1512 MG RESISTOR
R1513 MG RESISTOR
R1514 MG RESISTOR
R1515 MG RESISTOR
R1516 MG RESISTOR
R1517 MG RESISTOR
R1518 MG RESISTOR
R1520 MG RESISTOR
R1521 MG RESISTOR
VR1501 V RESISTOR
VR1502 TRIM RESISTOR
C1501 CAPACITOR
C1502 E CAPACITOR
C1503 CAPACITOR
C1504 E CAPACITOR
C1505 CAPACITOR
C1506 CAPACITOR
C1507 CAPACITOR
C1508 MF CAPACITOR
C1509 CAPACITOR
C1510 CAPACITOR
C1511 E CAPACITOR
C1512 CAPACITOR
C1513 E CAPACITOR
C1514 E CAPACITOR
C1515 M CAPACITOR
C1516 CAPACITOR
C1517 E CAPACITOR
C1518 E CAPACITOR
HR-S4800U
—
—
—
—
QETC1CM-226Z
QETC1HM-104Z
QETC1HM-105Z
QETC1HM-475Z
QETC1HM-225Z
QETC1HM-104Z
QFV11HJ-473Z
QETC1HM-474Z
QETC1HM-104Z
QETC1HM-105Z
QETC1HM-105Z
QETC1HM-105Z
QETN1HM-335Z
QETN1HM-106Z
QETC1HM-105Z
QETC1HM-106Z
QETC1HM-106Z
QETC1HM-105Z
PB11076A
UPC1852AGT
—
—
QRE141J-102Y
QRE141J-334Y
QRE141J-124Y
QRE141J-302Y
QRE141J-512Y
QRE141J-333Y
QRE141J-333Y
QRE141J-392Y
QRE141J-122Y
QRE141J-392Y
QRE141J-122Y
—
—
—
—
—
QRE141J-123Y
—
Notes : Mark is same as left.
Mark — is not used.
—
—
—
—
—
—
—
—
—
—
HR-S7800U
—
—
HR-S7800U(C)
—
—
—
—
—
—
—
—
—
—
—
—
HR-S6700KR
NRSA02J-102X
NRSA02J-471X
QVPA606-103Z
QVP0039-683Z
NCB21EK-473X
QEKC1CM-106Z
NCB21HK-471X
—
NDC21HJ-470X
NDC21HJ-470X
NCB21EK-104X
QFV11HJ-124Z
NCB21EK-104X
NCB21EK-473X
—
NCB21EK-683X
QEKC1EM-475Z
QEKC1EM-475Z
QFLC1HJ-683Z
NCB21EK-473X
QETC1CM-227Z
QETC1CM-106Z
PB11091A
KA2268
2SC1740S/QRS/-T
DTC144WSA
NRSA02J-471X
NRSA02J-102X
NRSA02J-822X
NRSA02J-103X
NRSA02J-473X
NRSA02J-101X
NRSA02J-102X
NRSA02J-273X
NRSA02J-103X
NRSA02J-563X
NRSA02J-562X
NRSA02J-332X
NRSA02J-123X
NRSA02J-123X
NRSA02J-562X
NRSA02J-273X
NRSA02J-103X
NRSA02J-102X
HR-S2110T
—
—
—
—
QETC1CM-226Z
QETC1HM-104Z
QETC1HM-105Z
QETC1HM-475Z
QETC1HM-225Z
QETC1HM-104Z
QFV11HJ-473Z
QETC1HM-474Z
QETC1HM-104Z
QETC1HM-105Z
QETC1HM-105Z
QETC1HM-105Z
QETN1HM-335Z
QETN1HM-106Z
QETC1HM-105Z
QETC1HM-106Z
QETC1HM-106Z
QETC1HM-105Z
PB11076A
UPC1852AGT
—
—
QRE141J-102Y
QRE141J-334Y
QRE141J-124Y
QRE141J-302Y
QRE141J-512Y
QRE141J-333Y
QRE141J-333Y
QRE141J-392Y
QRE141J-122Y
QRE141J-392Y
QRE141J-122Y
—
—
—
—
—
QRE141J-123Y
—
4
REF.
NO.
ITEM
C1519 E CAPACITOR
C1520 E CAPACITOR
C1521 E CAPACITOR
C1522 E CAPACITOR
C1523 CAPACITOR
C1524 E CAPACITOR
C1526 CAPACITOR
C1527 CAPACITOR
C1528 E CAPACITOR
C1530 CAPACITOR
L1501 P COIL
MODEL
HR-S4800U
—
—
QETC1HM-106Z
—
—
—
—
—
—
—
—
HR-S7800U
—
—
—
—
—
—
—
—
—
—
HR-S7800U(C)
—
—
—
—
—
—
—
—
—
—
HR-S6700KR
QETC1CM-106Z
QETC1CM-106Z
—
QEKC1CM-106Z
NCB21HK-332X
QETC1CM-227Z
NDC21HJ-470X
NDC21HJ-470X
QEKC1CM-106Z
NCB21EK-473X
QQL01BJ-680Z
HR-S2110T
—
—
QETC1HM-106Z
—
—
—
—
—
—
—
—
SUTTLE BOARD ASSEMBLY <85>
REF.
NO.
ITEM
MODEL
HR-S4800U
PW1 SUTTLE BOARD ASSY LPA20006-02A
UN7001 JOG SHUTTLE SW PESW0679
HR-S7800U HR-S7800U(C) HR-S6700KR
LPA20006-01A
QSW0845-001
HR-S2110T
C.BOX BOARD ASSEMBLY <92>
REF.
NO.
PW3
MODEL
ITEM
C.BOX BOARD ASSY
HR-S4800U
LPA10089-01B3
HR-S7800U
LPA10089-01C3
HR-S7800U(C) HR-S6700KR
—
HR-S2110T
—
5
SECTION 3
ELECTRICAL ADJUSTMENT
3.1 PRECAUTION
The following adjustment procedures are not only necessary after replacement of consumable mechanical parts or board assemblies, but are also provided as references to be referred to when servicing the electrical circuitry.
In case of trouble with the electrical circuitry, always begin a service by identifying the defective points by using the measuring instruments as described in the following electrical adjustment procedures. After this, proceed to the repair, replacement and/or adjustment. If the required measuring instruments are not available in the field, do not change the adjustment parts (variable resistor, etc.) carelessly.
3.1.1 Required test equipments
• Color (colour) television or monitor
• Oscilloscope: wide-band, dual-trace, triggered delayed sweep
• Frequency counter
• Audio level meter
• Signal generator: RF / IF sweep / marker
• Signal generator: stairstep, color (colour) bar [NTSC]
• Recording tape
• Digit-key remote controller(provided)
3.1.2 Required adjustment tools
Jig RCU
PTU94023B
Alignment tape
(SP, stairstep, NTSC)
MHP
Jig RCU
LPF
PTU93006
Alignment tape
(S-VHS SP/EP, color (colour) bar)
MH-1H
3.1.3 Color (colour) bar signal,Color (colour) bar pattern
s Color bar signal [NTSC]
White(100%) s Color bar pattern [NTSC]
(75%)
White(75%)
Burst
100 IRE
1V
40 IRE
Horizontal sync
Q I
40 IRE
Q
White
100%
I Black
3.1.4
Switch settings and standard precautions
The SW settings of the VCR and the standard precautions for the electrical adjustments are as follows.
• When using the Jig RCU, set its custom code to match the custom code of the VCR.
[Data transmitting method]
Depress the “ ” ( 3 ) button after the data code is set.
INITIAL MODE
DATA CODE
CUSTOM CODE
43: A CODE
53: B CODE
Fig. 3-1-4a Jig RCU
• Set the switches as shown below unless otherwise specified on the relevant adjustment chart. The switches that are not listed below can be set as desired.
If the VCR is not equipped with the functions detailed below, setup is not required.
AUTO PICTURE/VIDEO CALIBRATION/ OFF
B.E.S.T./D.S.P.C.
PICTURE CONTROL/SMART PICTURE NORMAL/NATURAL
VIDEO STABILIZER OFF
TBC ON
Digital 3R ON
• Unless otherwise specified, all measuring points and adjustment parts are located on the Main board.
• In the Signal column of the adjustment chart, “Ext. Sinput” means the Y/C separated video signal and “Ext.
input” means the composite video signal input.
3.1.5 EVR Adjustment
Some of the electrical adjustments require the adjustment performed by the EVR system. The Main board assembly have EEPROMs for storing the EVR adjustment data and user setups.
Notes:
•
In the EVR adjustment mode, the value is varied with the channel buttons (+, –). The adjusted data is stored when the setting mode changes (from PB to STOP, when the tape speed is changed, etc.). Take care to identify the current mode of each adjustment item when making an adjustment.
•
When changing the address setting in the EVR adjustment mode, use the Jig RCU or the remote controller having numeric keypad with which a numeric code can be directly input.
The remote control code of the Jig RCU corresponds to each of the digit keys on the remote controller as follows.
Digit-key 0 1 2 3 4 5
Code 20 21 22 23 24 25
6
26
7 8 9
27 28 29
• As the counter indication and remaining tape indication are not displayed FDP during the EVR adjustment mode, check them on the TV monitor screen.
• When performing the EVR adjustment, confirm that the
FDP indication is changed to the EVR mode, as shown below.
3-1
FDP
Fig. 3-1-5a EVR mode
3.2 SERVO CIRCUIT
3.2.1
Switching point
Signal
Mode
(A1) • Stairstep signal
(A2) • Alignment tape [MHP]
(B) • PB
• TBC: OFF
Equipment (C) • Oscilloscope
Measuring point (D1) • VIDEO OUT terminal (75Ø terminated)
(D2) • TP106 (PB. FM)
External trigger (E)
Adjustment part (F)
• TP111 (D.FF)
• Jig RCU: Code “5A”
Specified value (G)
Adjustment tool (H)
• 7.5 ± 0.5H [MHP]
• Jig RCU [PTU94023B]
(1) Play back the signal (A1) of the alignment tape (A2).
(2) Apply the external trigger signal to D.FF (E) to observe the VIDEO OUT waveform and V.PB FM waveform at the measuring points (D1) and (D2).
(3) Press the channel buttons (+, –) simultaneously to enter the manual tracking mode. This also brings tracking to the center (centre).
(4) Adjust tracking by pressing the channel buttons (+, –) so that the V.PB FM waveform becomes maximum.
(5) Set the VCR to the Auto adjust mode by transmitting the code (F) from the Jig RCU. When the VCR enters the stop mode, the adjustment is completed.
(6) If the VCR enters the eject mode, repeat steps (1) to (5) again.
(7) Play back the alignment tape (A2) again, confirm that the switching point is the specified value (G).
Trigger point
V.sync
Switching point
(1) Record the signal (A2) in the mode (B1), and play back the recorded signal.
(2) Press the channel buttons (+, –) simultaneously to enter the manual tracking mode. This also brings tracking to the center (centre).
(3) Set the VCR to the FWD slow mode.
(4) Transmit the code (F) from the Jig RCU to adjust so that the noise bar becomes the specified value (G) on the TV monitor in the slow mode.
(5) Set the VCR to the Stop mode.
(6) Confirm that the noise bar is (G) on the TV monitor in the slow mode.
(7) Repeat steps (3) to (6) in the REV slow mode.
(8) Repeat steps (1) to (7) in the mode (B2).
Note:
• For FWD slow playback, transmit the code “08” from the Jig RCU to enter the slow playback mode, and transmit the code “D0” for REV slow mode.
3.3 VIDEO CIRCUIT
3.3.1 D/A level
Signal
Mode
Equipment
(A1) • Ext. S-input / Ext. input
(A2) • Color (colour) bar signal [NTSC]
(A3) • S-VHS tape
(B)
(C)
Measuring point (D)
• S-VHS
• EE
• Oscilloscope
• VIDEO OUT terminal (75Ø terminated)
Adjustment part (F)
Specified value (G)
(Note)
• VR1401 (DA Y LEVEL ADJ) [3D board]
• 1.00 ± 0.015 Vp-p (reference value)
(1) Insert the cassette tape (A3) to enter the mode (B).
(2) Observe the VIDEO OUT waveform at the measuring point (D).
(3) Check the Y level value when the External S-input (Y/C separated video signal).
(4) Switch the input signal to the External input (composite video signal), and adjust the adjustment part (F) so that the Y level becomes the same value observed in step
(3).
Note:
•
The specified value (G) is just a reference value to be obtained when the External S-Video (Y/C separated video) signal is input. In actual adjustment, set it to the value observed in step (3).
V. rate
Fig. 3-2-1a Switching point
3.2.2
Slow tracking preset
Signal
Mode
Measuring point (D)
Adjustment part (F)
Specified value (G)
Adjustment tool (H)
(A1) • Ext. input
(A2) • Color (colour) bar signal [NTSC]
(B1) • S-VHS SP
(B2) • S-VHS EP
• TV-Monitor
• Jig RCU: Code “71“ or “72”
• Minimum noise
• Jig RCU [PTU94023B]
H. rate
Fig. 3-3-1a D/A level
Y level
3-2
3.3.2
EE Y level
Signal
Mode
Equipment
(A1) • Ext. input
(A2) • Color (colour) bar signal [NTSC]
(B) • EE
(C) • Oscilloscope
Measuring point (D)
EVR mode
EVR address
(F1)
(F2)
• Y OUT terminal (75Ø terminated)
• Jig RCU: Code “57”
• A:11 (Press remote controller “1” key twice)
Specified value (G)
Adjustment tool (H)
• 1.00 ± 0.03 Vp-p
• Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Observe the Y OUT waveform at the measuring point (D).
(2) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(3) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(4) Adjust with the channel buttons (+, –) on the VCR (or on the remote controller) so that the Y level of the Y OUT waveform becomes the specified value (G).
(5) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
Y level
H. rate
Fig. 3-3-2a EE Y level
3.3.3 PB Y level (S-VHS / VHS)
Signal
Mode
(A1) • Ext. input
(A2) • Color (colour) bar signal [NTSC]
(B1) • S-VHS SP
(B2) • VHS SP
(C) • Oscilloscope Equipment
Measuring point (D)
EVR mode
EVR address
(F1)
(F2)
• Y OUT terminal (75Ø terminated)
• Jig RCU: Code “57”
• A:11 (Press remote controller “1” key twice)
Specified value (G)
Adjustment tool (H)
• 1.00 ± 0.03 Vp-p
• Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Observe the Y OUT waveform at the measuring point (D).
(2) Record the signal (A2) in the mode (B1), and play back the recorded signal.
(3) Press the channel buttons (+, –) simultaneously to enter the manual tracking mode. This also brings tracking to the center (centre).
(4) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(5) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(6) Adjust with the channel buttons (+, –) on the VCR (or on the remote controller) so that the Y level of the Y OUT waveform becomes the specified value (G).
(7) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
(8) Repeat steps (2) to (7) in the mode (B2).
Y level
H. rate
Fig. 3-3-3a PB Y level
3.3.4
REC color (colour) level
Signal (A1) • Alignment tape [MH-1H]
(A2) • Ext. input
(A3) • Color (colour) bar signal [NTSC]
Mode (B1) • S-VHS SP
(B2) • S-VHS EP
(C) • Oscilloscope Equipment
Measuring point (D1) • TP106 (PB. FM)
(D2) • PB color (colour) output of the LPF
External trigger (E) • TP111 (D.FF)
EVR mode
EVR address
(F1) • Jig RCU: Code “57”
(F2) • A:02 (Press remote controller
“0” and “2” keys)
Specified value (G) • SP: “B” x 125 ± 5%
• EP: “B” x 125 ± 5%
Adjustment tool (H1) • Jig RCU [PTU94023B]
(H2) • Digit-key remote controller
(H3) • LPF [PTU93006] (See Fig. 3-3-4a.)
1 kØ 39
µH
180
µH
PB. FM 629 [kHz]
PB COLOR
(PB COLOUR)
120 pF 180 pF
Fig. 3-3-4a LPF
(1) Connect the adjustment tool (H3) to the measuring point (D1).
(2) Apply the external trigger signal to D.FF (E) to observe the
PB color (colour) waveform at the measuring point (D2).
(3) Play back the signal (A3) in the mode (B1) of the alignment tape (A1).
(4) Press the channel buttons (+, –) simultaneously to enter the manual tracking mode. This also brings tracking to the center (centre).
(5) Adjust tracking by pressing the channel buttons (+, –) so that the PB color (colour) waveform becomes maximum.
Make a note of the higher PB color (colour) level as “B” at this time.
(6) Record the signal (A3) in the mode (B1), and play back the recorded signal.
(7) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(8) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(9) Adjust with the channel buttons (+, –) on the VCR (or on the remote controller) so that the higher level channel becomes the specified value (G) of the note "B" level as shown in Fig. 3-3-4b. (Adjust before recording, then confirm it by playing back.)
(10) After adjustment, record the signal (A3) then playing it back again. At this time, confirm that there is no inverting phenomenon or noise appearing on the playback screen.
(11) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
(12) Repeat steps (3) to (11) in the mode (B2).
3-3
Note:
•
After adjusting, always perform the confirmation and re-adjustment of the item 3.4.1.
Specified value (G)
3.3.6 AUTO PICTURE initial setting
Signal (A1) • Ext. input
(A2) • Video: Optional
(A3) • VHS tape
Mode (B)
Adjustment part (F)
• EE ¥ Auto adjust (SP/EP REC ¥ PB)
• Jig RCU : Code “58”
Specified value (G)
Adjustment tool (H)
• STOP mode
• Jig RCU [PTU94023B]
(1) Insert the cassette tape (A3).
(2) Set the VCR to the Auto adjust mode by transmitting the code (F) from the Jig RCU. When the VCR enters the stop mode, the adjustment is completed. When the VCR enters the eject mode, repeat steps (1) to (2) again.
V. rate
Fig. 3-3-4b REC color (colour) level
3.3.5
Video EQ (Frequency response)
Signal (A1) • Ext. S-input
(A2) • Video sweep signal
Mode (B1) • S-VHS SP
(B2) • S-VHS EP
(B3) • Picture Control / Smart Picture
REC : Normal / Natural
PB : Edit / Distinct
(C) • Oscilloscope Equipment
Measuring point (D1) • Y OUT terminal (75Ø terminated)
Frequency marker (D2) • 3.58 [MHz]
External trigger (E) • TP111 (D.FF)
EVR mode
EVR address
(F1) • Jig RCU: Code “57”
(F2) • A:03 (Press remote controller
“0” and “3” keys)
Specified value (G)
Adjustment tool (H)
• SP: 3.2 ± 0.2 div. (-2 ± 0.5 dB)
• EP: 2.8 ± 0.2 div. (-3 ± 0.5 dB)
• Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Apply the external trigger signal to D.FF (E) to observe the Y OUT waveform at the measuring point (D1).
(2) Record the signal (A2) in the mode (B1), and play back the recorded signal.
(3) Press the channel buttons (+, –) simultaneously to enter the manual tracking mode. This also brings tracking to the center (centre).
(4) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(5) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(6) Set the slope of the oscilloscope to the channel having higher (D2) marker level of the Y OUT waveform [signal
(A2)]. Then set the 100 kHz marker level to the “4” scale on the oscilloscope. In this condition, adjust with the channel buttons (+, –) on the VCR (or on the remote controller) so that the (D2) marker level reaches the specified value (G).
(7) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
(8) Repeat steps (2) to (7) in the mode (B2).
Scale 4
(4 div.)
Four scale
100 kHz
1 MHz 2 MHz
Frequency marker (D2)
5 MHz
Specified value (G)
V. rate
Fig. 3-3-5a Video EQ (Frequency Response)
3-4
3.4 AUDIO CIRCUIT
Notes:
•
This adjustment should be done after the “REC color
(colour) level adjustment” for the video circuit has been completed.
• GND (Ground) should be taken from the Tuner shield case.
3.4.1 Audio REC FM
Signal (A1) • Ext. input
(A2) • Audio: No signal
(A3) • Video: Color (colour) bar signal [NTSC]
(B) • S-VHS EP Mode
Equipment
Measuring point (D)
External trigger (E)
EVR mode
EVR address
(C) • Oscilloscope
• TP2253 (A. PB. FM)
• TP111 (D.FF)
(F1) • Jig RCU: Code “57”
(F2) • A: 30 (Press remote controller “3” and “0” keys.)
Specified value (G1) • 500 ± 100 mVp-p
(G2) • More than 350 mVp-p
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Apply the external trigger signal to D.FF (E) to observe the Audio PB FM waveform at the measuring point (D).
(2) Record the signal (A3) with no audio signal input in the mode (B), and play back the recorded signal.
(3) Press the channel buttons (+, –) simultaneously to enter the manual tracking mode. This also brings tracking to the center (centre).
(4) If the A.PB FM level is not within the specified value (G1), perform the adjustment in a following procedure.
(5) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(6) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(7) Adjust with the channel buttons (+, –) on the VCR (or on the remote controller) so that the A.PB FM level of the higher channel level becomes the specified value (G1).
(Adjust before recording, then confirm it by playing back.)
(8) If the specified value (G1) is not obtained, adjust with the channel buttons (+, –) so that the waveform level of the lower channel level becomes the specified value (G2).
(Adjust before recording, then confirm it by playing back.)
(9) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
Specified value (G2)
Specified value (G1)
V. rate
Fig. 3-4-1a Audio REC FM
3.5 DEMODULATOR CIRCUIT
Notes:
•
Unless otherwise specified in this demod circuit adjustments, all measuring points and adjustment parts are located on the Demod board.
•
Unless otherwise specified,set an audio multiplex TV signal generator as follows;
[HR-S2110T, S7800U/U(C)]
RF signal : 70 dBµ / 75Ø, color bar 87.5% modulation.
[HR-S6700KR]
RF signal : 70 dBµ / 75Ø, color bar 87.5% modulation.
(P/S1 = 13 dB, P/S2 = 20 dB)
3.5.1
Input level [HR-S2110T, S7800U/U(C)]
Signal
Mode
(A) • RF signal (Audio: mono 300 Hz)
(B) • Tuner
• EE
Equipment (C) • Audio level meter
Measuring point (D) • IC1501 pin 26
EVR mode
EVR address
(F1) • Jig RCU : Code “57”
(F2) • A : 20 (Press remote controller “2” and “0” keys.)
Specified value (G) • 500 ± 10 mVrms
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Set an audio signal mode of the RF signal generator to mono 300 Hz.
(2) Connect the equipment (C) to the measuring point (D).
(3) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(4) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(5) Adjust with the channel buttons (+,–) on the VCR (or on the remote controller) so that the level of the measuring point (D) becomes the specified value (G).
(6) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
3.5.2 Stereo VCO [HR-S2100T, S7800U/U(C)]
Signal
Mode
(A) • No signal
(B) • Tuner
• EE
Equipment (C) • Frequency counter
Measuring point (D1) • IC1501 pin 26
Short point (D2) • C1505(–) terminal
EVR mode
EVR address
(F1) • Jig RCU : Code “57”
(F2) • A : 21 (Press remote controller “2” and “1” keys.)
Specified value (G) • 15.73 ± 0.1 kHz
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Connect the short wire between the short point (D2) and the GND (Ground).
(2) Connect the equipment (C) to the measuring point (D1).
(3) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(4) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(5) Adjust with the channel buttons (+,–) on the VCR (or on the remote controller) so that the frequency of the measuring point (D1) becomes the specified value (G).
(6) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
(7) Disconnect the short wire between the short point (D2) and the GND (Ground).
3.5.3 Stereo filter [HR-S2110T, S7800U/U(C)]
Signal
Mode
(A) • RF signal (Audio: No signal)
(B) • Tuner
• EE
(C) • Oscilloscope Equipment
Measuring point (D) • IC1501 pin 26
EVR mode
EVR address
(F1)
(F2)
• Jig RCU : Code “57”
• A : 22 (Press remote controller “2” key twice.)
Specified value (G) • Minimum level
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Set an audio signal mode of the RF signal generator to no signal.
(2) Connect the equipment (C) to the measuring point (D).
(3) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(4) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(5) Adjust with the channel buttons (+,–) on the VCR (or on the remote controller) so that the level of the measuring point (D) becomes the specified value (G).
(6) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
3-5
3.5.4
Separation - 1 [HR-S2110T, S7800U/U(C)]
Signal
Mode
(A) • RF signal
(Audio: L-ch 300 Hz 14% modulated)
(B) • Tuner
• EE
(C) • Audio level meter Equipment
Measuring point (D) • IC1501 pin 26
EVR mode
EVR address
(F1)
(F2)
• Jig RCU : Code “57”
• A : 23 (Press remote controller “2” and “3” keys.)
Specified value (G) • Minimum level
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Set an audio signal mode of the RF signal generator to alternate L-ch 300 Hz 14% modulated.
(2) Connect the equipment (C) to the measuring point (D).
(3) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(4) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(5) Adjust with the channel buttons (+,–) on the VCR (or on the remote controller) so that the level of the measuring point (D) becomes the specified value (G).
(6) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
3.5.5
Separation - 2 [HR-S2110T, S7800U/U(C)]
Signal
Mode
(A) • RF signal
(Audio: L-ch 5 kHz 14% modulated)
(B) • Tuner
• EE
Equipment (C) • Audio level meter
Measuring point (D) • IC1501 pin 26
EVR mode
EVR address
(F1) • Jig RCU : Code “57”
(F2) • A : 24 (Press remote controller “2” and “4” keys.)
Specified value (G) • Minimum level
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Set an audio signal mode of the RF signal generator to alternate L-ch 5 kHz 14% modulated.
(2) Connect the equipment (C) to the measuring point (D).
(3) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(4) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(5) Adjust with the channel buttons (+,–) on the VCR (or on the remote controller) so that the level of the measuring point(D) becomes the specified value (G).
(6) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
3.5.6
SAP VCO [HR-S2110T, S7800U/U(C)]
Signal
Mode
(A) • No. signal
(B) • Tuner
• EE
Equipment (C) • Frequency counter
Measuring point (D1) • IC1501 pin 26
Short point (D2) • C1505 (–) terminal
EVR mode
EVR address
(F1) • Jig RCU : Code “57”
(F2) • A : 25 (Press remote controller “2” and “5” keys.)
Specified value (G) • 78.67 ± 0.5 kHz
Adjustment tool (H) • Jig RCU [PTU94023B]
• Digit-key remote controller
(1) Connect the short wire between the short point (D2) and the GND (Ground).
(2) Connect the equipment (C) to the measuring point (D1).
(3) Set the VCR to the EVR mode by transmitting the code
(F1) from the Jig RCU.
(4) Set the EVR address to (F2) by pressing the button of the digit-key remote controller.
(5) Adjust with the channel buttons (+,–) on the VCR (or on the remote controller) so that the frequency of the measuring point (D1) becomes the specified value (G).
(6) Release the EVR mode of the VCR by transmitting the code (F1) from the Jig RCU again. (When the EVR mode is released, the adjusted data is memorized.)
(7) Disconnect the short wire between the short point (D2) and the GND (Ground).
3.5.7 Main DET [HR-S6700KR]
Signal
Mode
(A)
(B)
Equipment (C)
Measuring point (D)
Adjustment part (F)
Specified value (G)
Adjustment tool (H)
• RF signal (sound carrier: S1)
• Tuner
• EE
• Audio level meter
• IC1501 pin 26
• T1502 (MAIN DET)
• Minimum distortion
• LPF (30 kHz), HPF (400 Hz)
(1) Set the sound carrier of the RF signal generator to S1.
(2) Connect the adjustment tool (H) to the measuring point
(D). Then connect the equipment (C) to the adjustment tool (H).
(3) Adjust the Adjustment part (F) so that the distortion level of the measuring point (D) becomes the specified value
(G).
3-6
3.5.8
Sub DET [HR-S6700KR]
Signal
Mode
(A)
(B)
Equipment (C)
Measuring point (D)
Adjustment part (F)
Specified value (G)
Adjustment tool (H)
• RF signal (sound carrier: S2)
• Tuner
• EE
• Audio level meter
• IC1501 pin 26
• T1501 (SUB DET)
• Minimum distortion
• LPF (30 kHz), HPF (400 Hz)
(1) Set the sound carrier of the RF signal generator to S2.
(2) Connect the adjustment tool (H) to the measuring point
(D). Then connect the equipment (C) to the adjustment tool (H).
(3) Adjust the Adjustment part (F) so that the distortion level of the measuring point (D) becomes the specified value
(G).
3.5.9
Pilot VCO [HR-S6700KR]
Signal
Mode
Equipment
(A)
(B)
(C)
• No signal
• Tuner
• EE
• Frequency counter
Measuring point (D1) • IC1501 pin 11
Short point (D2) • C1510 (+) terminal
(D3) • C1510 (–) terminal
Adjustment part (F) • VR1502 (PILOT VCO)
Specified value (G) • 210 ± 5 Hz
(1) Connect the short wire between the short points (D2) and (D3).
(2) Connect the equipment (C) to the measuring point (D1).
(3) Adjust the Adjustment part (F) so that the frequency of the measuring point (D1) becomes the specified value (G).
(4) Disconnect the short wire between the short points (D2) and (D3).
3.5.10 Separation [HR-S6700KR]
Signal
Mode
(A)
(B)
Equipment (C)
Measuring point (D)
Adjustment part (F)
Specified value (G)
Adjustment tool (H)
• Sweep generator output (90 dB, 1 kHz)
• EE
• Oscilloscope
• IC1501 pin 19
• VR1501 (SEPARATION)
• Minimum level
• Sweeper probe (See Fig. 3-5-10a.)
Shorter than 8 cm
Shield
C : 1000 P
R : 75
Ω
Out
Earth
Shorter than 5 cm
Fig. 3-5-10a Sweeper probe
(1) Use the adjustment tool (H), supply 1 kHz R-only modulated IF signal to IF terminal of U/V tuner (front end).
(2) Connect the equipment (C) to the measuring point (D).
(3) Adjust the Adjustment part (F) so that the output level of the measuring point (D) becomes the specified value
(G).
3.6 SYSCON CIRCUIT
Note:
• When perform this adjustment, remove the Mechanism assembly.
3.6.1
Timer clock
Signal
Mode
Equipment
(A)
(B)
(C)
• No signal
• EE
• Frequency counter
Measuring point (D1) • IC3001 pin61
Short point (D2) • IC3001 pin24
(D3) • C3026 + and –
Adjustment part (F) • C3025 (TIMER CLOCK)
Specified value (G) • 1024.008 ± 0.001 Hz
(976.5549 ± 0.0010 µsec)
(1) Connect the frequency counter to the measuring point
(D1).
(2) Connect the short wire between the short point (D2) and
Vcc (5V).
(3) Short the leads of capacitor (D3) once in order to reset the microprocessor of the SYSCON.
(4) Disconnect the short wire between the short point (D2) and Vcc then connect it again.
(5) Adjust the Adjustment part (F) so that the output frequency becomes the specified value (G).
3-7
5
4.1
SECTION 4
CHARTS AND DIAGRAM
BOARD INTERCONNECTIONS
OPEN
S IN
S OUT
OPEN
R.PAUSE/
AV COMPU
-LINK
0 6
(Page 4-16)
4
ONLY USED
FOR
HR-S7800U/U(C)
(Page 4-16)
(Page 4-14)
8 5
(Page 4-14)
3
CABLE BOX CTL
LED RETURN
OPEN
CABLE BOX CTL
LED RETURN
(VIDEO/AUDIO
(SYSCON
(SW.REG
(TUNER
(DISPLAY
Page 4-5)
Page 4-7)
Page 4-9)
Page 4-11)
Page 4-13)
(TERMINAL
Page 4-15)
(BS CONNECTION
Page 4-16)
(S-SUB
Page 4-17)
OPEN
0 8
CN511
EMP IN
(Page 4-18)
EMP OUT
( SW5V
( H
ANT OUT ANT IN
2
OPEN
9 2
8 5
5 5
3 6
1 4
1 2
0 8
0 6
0 5
0 3
C.BOX
SHUTTLE
LOADING MOTOR
S JACK
DEMOD
A/C HEAD
SUB EMPHA
R.PAUSE
3D DIGITAL
MAIN
1
4-1
A B C
LP/EP LP/EP
D
NOTE : How to find the page showing the continuative schematic diagram
Example)
TO SYSCON (Page 4-
):
TO SYSCON (Page 4-
):
Refer to the HR-S4800U service manual (NO.82792)
Refer to this sevice manual
OPEN
AC120V
60Hz
ANT OUT ANT IN
CN1401(3D)
OPEN
2D DIGITAL
3D DIGITAL
(Page 4-3)
C TO DIGI
V/Y TO DIGI
Y FROM DIGI
C FROM DIGI
KILLER DET
I2C CLK
I2C DATA
CNR(H)/VPCTL
V.REF
D.FF
FH625(L)/TRICK(H)
3.58NTSC(L)/SLOW PULSE
(Page 4-5)
ONLY USED
FOR
HR-S7800U/U(C),
S2110T
ONLY USED
FOR
HR-S6700KR
BS VIDEO
BS AUDIO(L)
BS AUDIO(R)
BS P.CTL(L)
I2C DATA
I2C CLK
BIT IN(H)
ANT CTL(H)
BS ANT
TU VIDEO
GR ON(H)
GR VIDEO
BS VIDEO
BS AUDIO(L)
BS AUDIO(R)
BS P.CTL(L)
I2C DATA
I2C CLK
BIT IN(H)
ANT CTL(H)
BS ANT
( L
E F G H
4-2
4.2
3D DIGITAL/2M SCHEMATIC DIAGRAM
5
4
TO S-SUB
CN501
3
I2C DATA A/V
I2C CLK A/V
C
Y
Y
C
OPEN
OPEN
47p
DTC124TUA
OPEN
DTC144WUA
OPEN
OPEN
OPEN
C
2SA1576A
/QR
OPEN
OPEN
2SA1576A
/QR
OPEN
OPEN
Y
OPEN
2SA1576A
/QR
OPEN
2SA1576A
/QR
Y
2SC4081
/QRS
OPEN
2SA1576A
/QR
R1461
120
OPEN
Y
2
C
2SC4081
/QRS
330
OPEN
2SC4081
/QRS
OPEN
OPEN
OPEN
OPEN
1
4-3
A B C D
NOTE : When ordering parts, be sure to order according to the Part Number indicated in the Parts List.
2SA1576A
/QR
OPEN 240
OPEN
2SA1576A
/QR
C
Y
OPEN
OPEN
Y
2SC4081
/QRS
OPEN
2SC4081
/QRS
OPEN
2SA1576A
/QR
E F
3D DIGITAL/2M
G H
4-4
5
4.3
DEMODULATOR SCHEMATIC DIAGRAM [HR-S6700KR]
4
TO MAIN(TUNER)
CN6701
MODE SEL
DEMOD (R)
DEMOD (L)
SIF
3
2
1
4-5
A B C D
0.0033
DTC144WSA
68
Q1501
2SC1740S/QRS
E F G H
4-6
4.4
MAIN, A/C HEAD, S JACK, R.PAUSE, C.BOX AND LOADING MOTOR CIRCUIT BOARDS
DANGEROUS VOLTAGE
03 MAIN
LPB10089-001C
4-7
36 S JACK
LPB20009-001B
06 R.PAUSE
LPB10089-001C
92 C.BOX
LPB10089-001C
[HR-S7800U/U(C)]
12 A/C HEAD
LPB10010-001A
55 LOADING MOTOR
LPB10010-001A
4-8
COMPONENT PARTS LOCATION GUIDE <MAIN>
REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION
CAPACITOR
CN3004
CN3005
CN3007
CN5001
CN6701
CN7001
CN7101
CN7102
CN7103
A
A
A
A
A
A
A
A
A
DIODE
D
D
D
D
D
D
D
D
D
9F
3D
8P
1O
21J
2C
21B
20L
20G
L502
L503
L901
L2001
L2251
L5201
L5202
L5301
L6001
L6003
L6032
L6050
L7201
A
A
A
A
A
A
A
A
A
A
A
A
A
D
D
D
D
D
D
D
D
D
D
D
D
D
19F
19E
20M
16N
16M
3G
1F
3D
21N
21O
22K
21N
18L
CN1
CONNECTOR
CN501
CN502
CN503
CN504
CN2001
CN2002
CN3001
CN3002
CN3003
A
A
A
A
A
A
A
A
A
A
D
D
D
D
D
D
D
D
D
D
14O
22I
21E
19M
20H
9O
19L
7L
7P
7N
D1
D2
D3
D2201
D2202
D3001
D3002
D3004
D3005
D3006
D3007
D3008
D3010
D3013
D3015
D3016
D4003
D5001
D5101
D5102
D5103
D5104
D5201
D5202
D5203
D5204
D5205
D5206
D5208
D5209
D5210
D5211
D5213
D5301
D5302
D5303
D5304
D5305
D5308
D5309
D5310
D5311
D5312
D5315
D6002
D6551
D6650
D7002
D7003
D7004
D7005
D7006
D7009
D7010
IC1
IC2
IC501
IC3001
IC3002
IC3003
IC3004
IC5101
IC5301
IC6650
IC7001
IC7002
J1
J2
J3
J4
J5
J7101
L1
L2
L3
L4
L5
L11
L13
L15
L16
L17
L18
L19
L20
L24
L28
L201
L203
L401
L402
L501
A
A
A
A
B
A
B
B
B
B
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
B
A
A
A
B
A
A
A
A
A
A
A
IC
B
B
B
B
A
B
A
A
A
B
B
A
JACK
A
A
A
A
A
A
COIL
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
D
D
D
C
D
C
C
C
C
D
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
C
D
D
D
C
D
D
D
C
D
D
D
D
D
D
D
C
C
C
C
D
C
D
D
D
C
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
5D
5C
5C
6C
16C
4E
13E
10P
17B
17C
14H
3N
1L
2L
2K
18P
17P
7F
17L
16L
12H
3N
1I
3H
3I
3I
3I
2H
3H
3H
4H
1H
4J
2H
1E
1E
1F
3F
3F
4D
3F
4D
4E
3F
21M
20J
21F
7A
8B
17A
17A
9B
16A
16A
13M
8M
19F
11E
6N
13E
16C
2L
2E
22E
12B
8A
20Q
21Q
11Q
12Q
13Q
20A
16N
12N
10M
10L
12J
11L
11M
10O
7M
6M
7L
7K
12N
11N
11N
11G
12G
16O
17O
20E
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
Q9
Q10
Q11
Q12
Q13
Q16
Q17
Q18
Q21
Q22
Q23
Q25
Q26
Q27
Q28
Q29
Q33
Q38
Q45
Q201
Q401
Q402
Q403
Q404
Q405
Q501
Q901
Q902
Q903
Q904
Q2001
Q2002
Q2003
Q2051
Q2052
Q2053
Q2054
Q2055
Q2061
Q2062
Q2063
Q2251
Q3001
Q3002
Q3003
Q3004
Q3005
Q4001
Q4002
Q4003
Q4004
Q5101
Q5102
Q5103
Q5301
Q5302
Q5306
Q5307
Q5308
Q5310
Q5311
Q5312
Q5318
Q6030
Q6031
Q6501
Q6502
Q6551
Q7201
R1
R2
R3
R5
R6
R7
R8
R9
R12
R21
R22
R23
R24
R25
TRANSISTOR
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
B
B
B
B
B
B
B
A
B
B
A
B
A
B
B
B
B
A
B
B
B
B
B
A
A
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
C
C
C
C
C
C
C
D
C
C
D
C
D
C
C
C
C
D
C
C
C
C
C
D
D
RESISTOR
B
B
B
B
B
B
B
B
A
B
B
B
B
B
C
C
C
C
C
C
C
C
D
C
C
C
C
C
15N
15N
14O
14N
9N
7M
8K
7K
7J
10K
11K
11K
11K
11N
11O
9M
10M
10L
10K
11L
10L
10K
9I
9K
7M
11N
8J
10G
15O
16O
17O
16N
16O
19H
20N
20N
18N
18N
12O
12O
11O
7O
9P
9P
9P
9P
6K
6K
7J
17M
4I
19I
5M
6C
17E
7D
5B
9E
7D
3L
3L
3M
3G
3F
3F
2E
3E
4E
3F
1C
2D
22J
22J
20K
20K
20K
19L
12N
12N
12N
10L
11L
11L
12K
12K
10P
17N
17N
10O
8L
8K
2N
2P
2N
21N
19L
20L
16N
16N
16N
2L
1M
3O
16F
8G
4L
4M
3P
22K
21I
3F
4D
4F
12A
7O
6K
1K
22P
1P
4P
2P
12K
14L
12L
12L
13F
13G
18C
6F
18P
22B
18B
7B
6B
5B
4B
4B
3B
2B
2B
1B
17B
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
S3001
S3002
S6050
S7001
S7002
S7004
S7006
S7008
S7010
S7011
S7012
S7013
S7014
S7015
S7016
TEST POINT
TP106
TP111
TP2253
TP4001
TP7001
TPGND
A
A
A
A
A
A
D
D
D
D
D
D
6P
5P
6P
6P
3A
4A
11B
11B
15A
4B
5B
5B
2C
2C
15A
8B
8A
10B
15A
17B
15A
6B
5B
5B
15B
6B
5B
2B
1B
2B
2B
3B
16A
15A
18L
18L
19L
21E
21D
21F
21D
21D
22F
21E
10B
10B
22F
22F
22E
22E
21E
9F
14C
7G
8G
8G
8G
6B
7G
7H
3P
3N
2K
2L
1L
2L
3L
3M
3M
2L
3L
7A
4G
4G
1F
4J
3D
1I
3G
3F
2F
2F
1C
4D
2E
4D
3F
4F
4G
4D
1D
2C
21B
21N
21N
3D
2E
3E
4L
21N
21M
15D
22N
21J
22L
20K
21J
21N
21P
20K
20K
20K
21K
20J
19J
9H
7E
16C
17F
16F
7G
8H
5E
6D
7E
9E
14E
13E
12F
12F
12F
17B
11D
5M
5M
5M
5M
7G
8F
8F
8E
17B
7C
6D
5C
8P
15C
13I
13I
10C
10C
13G
7H
8F
14E
14B
10E
10F
C
C
C
C
C
C
C
C
C
D
D
D
C
D
D
D
D
D
D
C
D
C
C
D
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
C
C
C
C
D
D
D
C
C
C
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
C
D
C
D
D
C
C
D
C
C
C
C
C
C
B
B
B
B
B
B
B
B
B
A
A
A
B
A
A
A
A
A
A
B
A
B
B
A
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
B
B
B
B
A
A
A
B
B
B
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
B
A
B
A
A
B
B
A
B
B
B
B
B
B
R4012
R4013
R4018
R4019
R4020
R4021
R4022
R4024
R4025
R5001
R5101
R5102
R5103
R5104
R5105
R5106
R5107
R5108
R5109
R5110
R5301
R5302
R5303
R5304
R5305
R5306
R5307
R5308
R5309
R5310
R5311
R5313
R5314
R5315
R5316
R5317
R5318
R5323
R5324
R5325
R5326
R5327
R5328
R5351
R5352
R5353
R6020
R6021
R6022
R6023
R6025
R6026
R6030
R6031
R6032
R6034
R6050
R6053
R6508
R6509
R6510
R6511
R6551
R6552
R3209
R3210
R3211
R3212
R3213
R3214
R3215
R3216
R3217
R3218
R3219
R3220
R3222
R3223
R3224
R3225
R3226
R3100
R3201
R3202
R3203
R3204
R3205
R3206
R3207
R3208
R3227
R3232
R3233
R3234
R3235
R3236
R3237
R3238
R3240
R3241
R4001
R4002
R4003
R4004
R4006
R4010
R4011
11D
12D
12D
12D
12D
15C
13D
13D
13D
13D
14D
14C
15D
15D
13D
13E
13E
15D
15D
14D
14E
14F
13F
13F
13F
13F
13F
14F
13H
12G
12G
12G
12G
10G
9G
9G
9G
9G
9G
9G
9G
9G
9E
9E
9E
9E
8D
9D
9D
9D
9D
9D
9D
10D
8D
8D
8C
10D
8C
10D
10D
10D
10D
11D
6K
6K
6L
7K
17M
14K
14K
15K
15K
14J
14J
16K
16K
16K
16K
16L
16L
7O
7P
7O
8P
9P
9P
9P
9P
6K
16L
16L
16L
15K
16L
16L
16L
16L
15K
17L
17M
17M
20A
19B
20P
11P
11D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
D
C
D
C
C
C
C
C
D
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
C
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
A
B
A
B
B
B
B
B
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A
B
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
R3002
R3003
R3004
R3005
R3006
R3007
R3008
R3009
R3010
R3011
R3012
R3013
R3014
R3015
R3016
R3017
R3018
R3019
R3020
R3021
R3022
R3026
R3027
R3028
R3029
R3030
R3031
R3032
R3035
R3043
R3044
R3045
R3046
R3056
R3057
R3058
R3059
R3060
R3061
R3062
R3063
R3064
R3078
R3079
R3080
R3081
R3082
R3083
R3084
R3085
R3086
R3087
R3088
R3089
R3090
R3091
R3092
R3093
R3094
R3095
R3096
R3097
R3098
R3099
R2062
R2063
R2064
R2065
R2201
R2202
R2203
R2204
R2205
R2206
R2207
R2212
R2213
R2214
R2215
R2216
R2217
R2053
R2054
R2055
R2056
R2057
R2058
R2059
R2060
R2061
R2218
R2219
R2220
R2221
R2222
R2223
R2224
R2225
R2230
R2231
R2232
R2251
R2601
R2602
R2603
R2604
R3001
11G
11G
10G
10G
11G
11G
10G
15O
16O
16O
16O
16O
16O
16N
16O
21G
21G
19F
20G
20H
19G
18G
21H
21G
21P
21P
19M
20N
20M
20P
21B
10P
12P
12P
18N
18N
18N
18N
18N
18N
18N
21H
21H
12P
11P
13K
13J
14K
14K
16K
16K
16K
16K
16K
16K
16M
17M
13N
13N
13O
13O
13O
12O
12O
7O
8O
12N
12K
10K
11K
10K
10K
11K
10K
11K
11M
10L
10K
10L
10N
9L
9L
7M
8K
7K
8K
7K
7K
7J
7K
12O
11N
10M
16L
11M
8E
10P
12K
12K
11M
11N
11N
11N
11N
8I
11M
12N
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
D
D
C
C
C
C
C
C
C
C
D
D
D
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
A
A
B
B
B
B
B
B
B
B
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
B
B
B
B
B
B
B
B
B
R201
R202
R203
R204
R205
R206
R207
R401
R402
R403
R404
R405
R406
R407
R408
R501
R502
R503
R521
R522
R523
R524
R525
R526
R901
R902
R903
R904
R905
R911
R912
R913
R914
R915
R916
R917
R918
R919
R920
R921
R922
R924
R925
R926
R927
R2001
R2002
R2003
R2004
R2005
R2006
R2007
R2008
R2009
R2010
R2011
R2012
R2013
R2014
R2015
R2016
R2017
R2018
R2019
R2051
R2052
R35
R36
R38
R39
R41
R42
R43
R44
R45
R46
R48
R49
R50
R54
R62
R67
R68
R26
R27
R28
R29
R30
R31
R32
R33
R34
R69
R71
R75
R76
R77
R78
R79
R90
R92
R93
R103
R104
R110
R111
R112
10F
8F
9E
7E
2P
4P
1J
2M
1N
3K
2K
2L
3M
3L
1K
1H
3G
2G
3G
2H
4G
2F
1E
3G
10P
2E
2E
3E
4E
1C
3E
21M
22M
21M
22M
21O
22O
22N
22N
22N
22M
22J
22O
22P
20K
21K
20J
20J
20I
21I
21D
22E
22E
21E
19D
21J
11B
9B
13B
13A
13B
13B
7B
9B
18B
17A
19L
2D
6B
7B
12F
13G
10G
10G
13E
13E
13E
9I
10E
14F
11G
16A
7M
8G
8F
8F
10E
7F
9F
8F
7E
8F
8G
8F
6B
6B
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
C
D
D
C
D
C
D
C
C
C
C
C
C
C
C
C
C
D
C
D
C
C
C
C
C
D
D
D
D
D
C
C
C
D
C
C
C
D
D
C
D
C
D
C
C
D
D
C
C
C
C
C
D
C
D
D
C
C
D
C
D
C
C
C
C
D
C
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
B
A
B
A
B
B
B
B
B
B
B
B
B
B
A
B
A
B
B
B
B
B
A
A
A
A
A
B
B
B
A
B
B
B
A
A
B
A
B
A
B
B
A
A
B
B
B
B
B
A
B
A
A
B
B
A
B
A
B
B
B
B
A
B
C4019
C4022
C4024
C4025
C5001
C5003
C5004
C5006
C5101
C5102
C5103
C5104
C5105
C5106
C5107
C5201
C5202
C5203
C5204
C5205
C5206
C5207
C5208
C5209
C5211
C5301
C5302
C5303
C5304
C5305
C5310
C6005
C6006
C6007
C6008
C6012
C6013
C6020
C6021
C6022
C6023
C6033
C6052
C6053
C6519
C6520
C6551
C6552
C6553
C6554
C6650
C6651
C6652
C6653
C6654
C6655
C7001
C7002
C7007
C7008
C7009
C7010
C7011
C7012
C7013
C7014
C7206
C3028
C3029
C3030
C3035
C3036
C3041
C3042
C3043
C3045
C3048
C3049
C3050
C3051
C3052
C3053
C4001
C4002
C4004
C4006
C4007
C4008
C4009
C4010
C4011
C4012
C4014
C4015
C4016
C4017
B C
A D
B C
B C
A D
A D
B C
B C
A
A
A
A
A
A
A
A
A
A D 6K
B C 11J
B C 13K
A D 13K
A
A
A
B C 11J
A D
D
D
D
13K
13J
14K
D
D
D
D
D
D
D
D
D
14K
14K
15K
15K
15K
15L
15L
15L
16L
8N
8O
7P
7O
8O
6J
6K
6K
B C 18N
A D 18N
B C 21H
B C 12P
A D 14K
A D 14L
A D 15M
B C 15M
A D 14O
B C 13N
A D 13O
A D 13O
B C 13O
B C 13N
A D 13O
A D 13N
16M
16M
16M
16M
16M
16M
15M
15M
11J
17J
18L
15N
15M
16N
15N
7N
5M
5M
4I
20I
14E
13E
13F
13F
13G
12F
12F
13E
16B
4D
3D
2D
6B
D
C
D
D
C
D
D
C
C
C
C
D
C
C
C
C
C
D
C
C
D
C
C
C
D
C
C
C
C
D
C
D
D
A
B
A
A
B
A
A
B
B
B
B
A
B
B
B
B
B
A
B
B
A
B
B
B
A
B
B
B
B
A
B
A
A
B C 19H
A D 19G
B C 19G
B C 19G
A D 18G
B C 18G
B C 18G
A D 18G
A D 17G
B C 19F
B C 20F
B C 21G
A D 20O
B C 20N
A D 20N
B C 20N
B C 12P
A D 20E
A D 20F
B C 20F
B C 21F
A D 20F
B C 20G
B C 21H
B C 21G
B C 20H
B C 20G
A D 20G
A D 20I
B C 20E
A D 19G
B C 19H
C2064
C2201
C2202
C2203
C2204
C2205
C2206
C2207
C2208
C2209
C2210
C2211
C2212
C2215
C2216
C2217
C2218
C2219
C2051
C2052
C2053
C2054
C2055
C2061
C2062
C2063
C912
C913
C914
C915
C2001
C2002
C2003
C2004
C2005
C2006
C2007
C2008
C2009
C2010
C2011
C2012
C2220
C2221
C2222
C2223
C2224
C2225
C2226
C2227
C2231
C2232
C2233
C2251
C2252
C2253
C2254
C3001
C3002
C3003
C3007
C3008
C3013
C3015
C3016
C3017
C3018
C3019
C3020
C3022
C3023
C3024
C3025
C3026
C3027
C560
C561
C563
C565
C567
C901
C902
C903
C904
C911
C553
C554
C555
C556
C557
C558
C559
C516
C517
C518
C519
C520
C535
C551
C552
C509
C510
C511
C512
C513
C514
C515
C71
C72
C73
C74
C75
C76
C77
C80
C57
C58
C59
C60
C61
C63
C64
C69
C70
C41
C42
C52
C53
C54
C55
C56
C33
C34
C35
C36
C37
C38
C39
C40
C24
C25
C26
C27
C28
C29
C30
C31
C32
C17
C18
C19
C20
C21
C22
C23
C9
C10
C11
C12
C13
C14
C15
C16
C5
C6
C7
C8
C1
C2
C3
C4
C220
C401
C402
C403
C404
C405
C406
C202
C203
C205
C207
C208
C209
C210
C211
C407
C408
C409
C501
C502
C503
C504
C505
C506
C507
C508
C93
C96
C103
C106
C109
C110
C111
C128
C201
C82
C83
C84
C87
C88
C89
C90
B C 6M
B C 7M
B C 10N
A D 10N
B C 8N
B C 10N
B C 11M
B C 17N
B C 16N
B C
B C
B C
8L
8K
7K
B C 7K
B C 7M
B C 8L
B C 8M
B C 12M
A D 11L
B C 11K
B C 11K
A D 12L
A D 12K
A D 12K
B C 12K
A D 12K
B C 12K
B C 11K
A D 9M
B C 10K
B C 11K
B C 11L
B C 11L
A D 9M
A D 9M
A D 9M
A D 9M
B C 11M
A D 10M
B C 12M
B C 12M
B C 11L
B C 11L
B C 11L
A D 11L
B C 11L
A D 10L
A D 11L
B C 12L
B C 15N
B C 15N
B C 14N
B C 14N
A D 16N
B C 14N
B C 4H
B C 17N
B C 9M
B C 12N
B C 10O
B C 12N
B C 10N
B C 10N
B C 11N
B C 12M
B C 11G
A D 11G
B C 11G
B C 11G
B C 10G
B C 10G
B C 10G
B C 10G
B C 13G
B C 15O
B C 15O
B C 15O
B C 16O
B C 16O
B C 16O
B C
B C
9L
9K
B C 12N
B C 15N
B C 15N
B C 14N
B C 14N
B C 6M
B C 8E
B C 8L
B C 10N
B C 11N
B C 10N
B C 11M
B C 11M
A D 11G
B C 16O
B C 17O
A D 17O
A D 18G
A D 17F
A D 17F
B C 19E
A D 20E
B C 19G
A D 18G
A D 20E
C
C
C
C
C
C
C
C
C
C
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
C
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
SWITCH
B
B
B
B
B
B
B
B
B
B
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
B
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
R7003
R7004
R7005
R7006
R7007
R7008
R7009
R7010
R7013
R7014
R7015
R7017
R7020
R7021
R7022
R7023
R7024
R7025
R7030
R7031
R7032
R7033
R7034
R7035
R7036
R7037
R7040
R7041
R7202
R7203
R7204
R6650
R6651
R6652
R6653
R6654
R6655
R6656
R6657
R6658
R6659
R6660
R6661
R7001
R7002
OTHER
D
D
D
D
D
D
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
A
A
A
A
A
A
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
CF6031
CP501
CP4001
CP5301
CP5302
DI7001
F5001
FC5001
FC5002
FW3001
FW3002
FW3003
K2251
K2252
K2253
K5101
K5102
LF5002
PC3001
PC3002
PC5101
PC5102
SG5001
T2051
T2052
T5001
TU6001
VA5001
VA5002
VA5003
WR1
WR2
X1
X2
X3001
X3002
4-9
4.5
3D DIGITAL/2M CIRCUIT BOARD
05 3D DIGITAL/2M
LPB10105-001B
COMPONENT PARTS LOCATION GUIDE 3D DIGITAL/2M
REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION REF.NO.
LOCATION
CAPACITOR
C1411
C1412
C1413
C1414
C1415
C1416
C1417
C1420
C1421
C1422
C1401
C1402
C1403
C1404
C1405
C1406
C1407
C1408
C1409
C1410
C1423
C1424
C1425
C1426
C1427
C1428
A
B
A
B
B
B
B
B
B
A
B
B
B
B
B
A
B
B
B
B
B
B
B
D
C
D
C
C
C
C
C
C
D
C
C
C
C
C
D
C
C
C
C
C
C
C
6A
5A
5B
1C
1D
3B
1C
1C
2C
3B
3B
2B
2B
2B
1B
4A
4B
5B
5C
5B
6B
2D
2D
B C 2C
B C 2C
B C 2C
C1429
C1430
C1432
C1433
C1434
C1435
C1436
C1437
C1438
C1439
C1440
C1441
C1442
C1443
C1444
C1445
C1446
C1447
C1448
C1449
C1450
C1451
C1452
C1453
C1454
C1455
C1459
C1460
A D 3C
B C 4E
B C 3D
B C 3D
B C 3D
B C 3D
B C 3C
B C 3C
B C 3C
B C 3C
B C 3C
B C 3B
B C 3B
B C 4B
B C 3B
B C 4C
A D 5C
B C 5C
A D 5C
B C 4C
B
A
B
B
B
C
D
C
C
C
4C
5D
5C
5D
5D
B C 4E
B C 1B
B C 2B
C1461
C1462
C1463
C1464
C1465
C1466
C1467
C1468
C1469
C1470
C1471
C1472
C1473
CONNECTOR
CN1401
D1401
D1402
D1403
D1404
IC1401
L1401
L1402
L1403
B C 2B
B C 2A
A D 2B
B C 3B
B C 3B
B C 3A
B C 3B
B C 4A
B C 4A
B C 5A
B
B
B
A
DIODE
A
A
B
B
IC
B
COIL
A
A
A
C
C
C
D
D
D
C
C
C
D
D
D
2D
3C
3C
5A
5A
6C
3B
2E
4D
5B
2C
2B
L1404
L1405
L1406
L1407
L1409
Q1401
Q1402
Q1403
Q1404
Q1406
Q1407
Q1408
Q1410
Q1412
Q1413
Q1414
Q1417
Q1418
Q1419
Q1420
Q1421
Q1422
R1401
R1402
R1404
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
TRANSISTOR
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
RESISTOR
C
C
C
5C
4B
2C
A D 5B
A D 5A
5B
1C
2D
1D
2B
1C
4B
5C
2C
2C
3B
5B
4B
2A
4B
5B
4E
5A
5A
2C
R1405
R1406
R1407
R1408
R1410
R1411
R1412
R1413
R1414
R1415
R1416
R1417
R1418
R1421
R1425
R1426
R1427
R1428
R1429
R1430
R1431
R1432
R1433
R1434
R1435
R1436
R1437
R1438
B
B
B
B C 2D
B C 2D
B C 2B
B C 2B
B C 1B
B C 1B
B C 3D
B C 3B
B C 4B
B C 3B
B
B C 5C
B C 5C
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
2C
2D
1D
5B
2D
2D
2C
2C
2C
2C
2C
3D
2E
1E
4B
4C
R1439
R1440
R1441
R1442
R1446
R1447
R1448
R1449
R1450
R1451
R1452
R1453
R1454
R1455
R1458
R1459
B
B
B
B C 4A
B C 4B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
4B
5C
4A
1A
2A
2A
2A
3A
3A
3A
4A
5A
B C 5B
B C 4B
R1460
R1461
R1462
R1463
B
B
B
B
C
C
C
C
2A
5B
5B
4B
VR1401 A D 1E
LC1401
OTHER
A D 4A
LC1402 A D 2A
4-10
4.6
DEMODULATOR CIRCUIT BOARD [HR-S6700KR]
B
14 DEMOD
PB11091
A
1 2 3
COMPONENT PARTS LOCATION GUIDE DEMODULATOR
REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION
CAPACITOR
C1501
C1502
C1503
C1504
C1505
C1506
C1507
C1508
C1509
C1510
C1512
C1513
C1514
B
A
B
B
B
B C 2A
B C 2A
A D 1A
B C 2A
B
B
A
A
C
D
C
C
C
C
C
D
D
2A
2A
2A
2A
2A
1A
1A
1A
1A
C1515
C1516
C1517
C1518
C1519
C1520
C1521
C1522
C1523
C1524
C1525
C1526
C1527
C1528
C1529
A
B C 1A
A D 1B
A
A D 1B
A D 1B
B C 1B
A D 2B
B C 1B
A D 2B
B
D
D
C
1A
1B
2B
B C 2B
B C 2B
A D 2B
B C 2B
C1530
CONNECTOR
CN1501
IC1501
L1501
TRANSISTOR
Q1501
Q1502
RESISTOR
R1501
B
A
IC
A
COIL
A
A
A
B
C
D
D
D
D
D
C
2B
3B
2A
1A
2A
1B
3A
R1502
R1503
R1504
R1505
R1506
R1507
R1508
R1509
R1510
R1511
R1512
R1513
R1514
R1515
R1516
B C 2A
B C 2A
B C 2A
B C 2A
B C 2A
B C 2A
B C 2A
B C 1A
B C 1A
B C 1B
B C 1B
B C 1B
B C 1B
B C 1B
B C 2B
R1517
R1518
R1520
R1521
B C 2B
B C 2B
B
VR1501 A D 2B
VR1502 A D 1A
OTHER
CF1501
B
A
A
C
C
D
D
2B
3B
2A
CF1502 A D 2A
CF1503 A D 2B
T1501
T1502
A D 2A
2B
4-11
3
2
5
4.7
REMOTE CONTROL SCHEMATIC DIAGRAM [HR-S2110T/S6700KR]
) +
( CH
) -
( CH
4
1
A B C D
4-12
SECTION 5
PARTS LIST
SAFETY PRECAUTION
Parts identified by the
!
symbol are critical for safety. Replace only with specified part numbers.
504
5.1
CABINET AND CHASSIS ASSEMBLY
<
M2
>
503
BEWARE OF BOGUS PARTS
Parts that do not meet specifications may cause trouble in regard to safety and performance. We recommend that genuine JVC parts be used.
518B
509
518
(HR-S6700KR
HR-S2110T)
502
508
WR1
518A
518C
507
505
505F
505E
507
A
506
521
520
505D
505B
520A
DEMOD BOARD
ASSY <14>
K
SUB EMP BOARD
ASSY <08>
533
3D DIGITAL/2M BOARD
ASSY <05>
C
527
528
510
505A
505C
505G
P
526
MAIN BOARD
ASSY <03>
512
522
G
524
522
503
(Incl <03>)
OT1
B
A
C.BOX BOARD
R.PAUSE
BOARD
ASSY<06>
ASSY<92>
[HR-S7800U/U(C)]
517
510
E
525
519
505H
B
WR2
516
523
P
D
SPEC OF
BARCODE
K
515
516
MECHANISM
ASSY <M4>
514
501
G
WR4
D
501A
501B
532
S JACK BOARD
ASSY <36>
E
WR3
531
513
C
511
SHUTTLE BOARD
ASSY <85>
501C
529
530
5-1
524
525
526
527
528
529
518B
518C
519
520
520A
521
522
523
505F
505G
505H
506
507
! 508
509
510
! 511
!
512
513
514
515
516
! 517
!
!
518
518A
504
505
505A
505B
505C
505D
505E
# REF No. PART No.
PART NAME, DESCRIPTION # REF No. PART No.
PART NAME, DESCRIPTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽
531 QYTDSF2608Z SCREW,X2 SHUTTLE
532 QYTDSF2608Z SCREW,X2 S JACK
CABINET AND CHASSIS ASSEMBLY
<
M2
>
533 LP30002-088B SPACER,SHIELD FRAME
WR1 QUQ212-0518CG FFC WIRE,DRUM CN3002
! 501
!
!
501A
LP10289-020C
LP10289-039B
LP10289-042B
LP20868-005A
FRONT PANEL ASSY,S7800U/U(C)
FRONT PANEL ASSY,S6700KR
FRONT PANEL ASSY,S2110T
CASSETTE DOOR,S7800U/U(C)
WR2
WR3
WR4
WJT0005-002A
QUQ112-0914CG FFC WIRE,FRONT CN7001
WJT0026-001A
E-CARD WIRE,A/C HEAD CN2001
E-CARD WIRE S JACK C7103
501B
501C
! 502
!
503
530
LP20868-017A
PQ46448
LP20869-024A
LP20869-052A
LP20869-060A
LP10013-021D
LP10013-031C
QYTDSF3010M
QYTDSF3010R
QYTDSF3010M
LP20617-008A
LP20030-015A
PDM4439
PDM4444-19-2
LP40572-001A
LP40323-001A
CASSETTE DOOR,S6700KR/S2110T
TORSION SPRING
DISPLAY WINDOW,S7800U/U(C)
DISPLAY WINDOW,S6700KR
DISPLAY WINDOW,S2110T
TOP COVER,S7800U/U(C)
TOP COVER,S6700KR/S2110T
SCREW,X2 TOP COVER(SIDE),S7800U/U(C)
SCREW,TOP COVER(SIDE),S6700KR/S2110T
SCREW,TOP COVER(REAR)
DRUM SUB ASSY
UPPER DRUM ASSY
CAP
WASHER
COLLAR ASSY
CONTACT
LP30004-014A
LP40174-001B
LP20615-007A
PDZ0179-1-4
QYSPSP3006Z
QAR0119-001
QYSPSPH2606Z
QYTDST2610Z
COMPRESSION SPRING
FPC PLATE
LOWER DRUM ASSY
ROTOR ASSY
SCREW,X2
STATOR ASSY
SCREW,X2
SCREW,X3 DRUM
LP10108-012B
LP10108-016A
QYTDSF3010Z
LP30312-001B
BOTTOM CHASSIS,S7800U/U(C)
BOTTOM CHASSIS,S6700KR/S2110T
SCREW,MAIN
BRACKET(CHASSIS)
QYTDSF3010Z
QYTDSF4012Z
SCREW,X2
SCREW,MECHA
QYTDSF3010Z SCREW,X2 MECHA
QMPD190-170-K POWER CORD,S7800U/U(C)
PQ21730N
QMP73J0-170
LP40369-001D
PQ46418-1-2
PQ46419-1-2
LP30407-001D
LP40407-001A
LP40370-001E
POWER CORD,S6700KR
POWER CORD,S2110T
CLEANER ASSY,S6700KR/S2110T
CLEANER ROLLER,S6700KR/S2110T
CLEANER, S6700KR/S2110T
CLEANER ARM,S6700KR/S2110T
KNOB ASSY
ROLLER ARM ASSY
PDM4311A-1
PQ44230
LP40226-001A
PQ40413
ROLLER ASSY
INERTIA PLATE
PC SUPPORT,X2
SPECIAL SCREW,MECHA
LP40253-001B
LP30356-002C
STOPPER
DRUM SHIELD
QYTDST2606Z SCREW,X2
QYWWS267505Z WASHER,DRUM,S2110T/S7800U/U(C)
LP30017-021A
LP30653-001A
LP30651-004A
LP30652-001A
LP30652-002A
SPACER,DRUM,S2110T/S7800U/U(C)
KNOB(JOG),S7800U/U(C)
KNOB(JOG), S6700KR/S2110T
KNOB(SHUTTLE),S7800U/U(C)
KNOB(SHUTTLE),S6700KR/S2110T
5-2
5.2
ELECTRICAL PARTS LIST
# REF No. PART No.
PART NAME, DESCRIPTION # REF No. PART No.
PART NAME, DESCRIPTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽
R1436 NRSA02J-682X MG RESISTOR 6.8kØ,1/10W
R1437 NRSA02J-392X MG RESISTOR 3.9kØ,1/10W
3D DIGITAL/2M BOARD ASSEMBLY
<
05
>
R1438 NRSA02J-473X MG RESISTOR 47kØ,1/10W
R1439 NRSA02J-273X MG RESISTOR 27kØ,1/10W
PW1 LPA10105-02A 3D DIGITAL/2M BOARD ASSY R1440 NRSA02J-473X MG RESISTOR 47kØ,1/10W
IC1401 JCP8026
Q1401 2SC1317/RS/-T
IC
TRANSISTOR
Q1402 2SA1576A/QR/-X TRANSISTOR or 2PA1576/R/-X TRANSISTOR
Q1403 2SA1576A/QR/-X TRANSISTOR or 2PA1576/R/-X TRANSISTOR
Q1406 2SA1576A/QR/-X TRANSISTOR or 2PA1576/R/-X TRANSISTOR
Q1407 2SA1576A/QR/-X TRANSISTOR or 2PA1576/R/-X TRANSISTOR
Q1408 2SC4081/S/-X TRANSISTOR
Q1410 2SC4081/QRS/-X TRANSISTOR or 2PC4081/R/-X TRANSISTOR
Q1412 2SC4081/QRS/-X TRANSISTOR or 2PC4081/R/-X TRANSISTOR
Q1413 2SA1576A/QR/-X TRANSISTOR or 2PA1576/R/-X
Q1414 DTC144WU or RN1309 or UN521E
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
Q1417 2SC4081/QRS/-X TRANSISTOR or 2PC4081/R/-X TRANSISTOR
Q1418 2SA1576A/QR/-X TRANSISTOR or 2PA1576/R/-X TRANSISTOR
Q1419 DTC124TUA TRANSISTOR
Q1420 2SC4081/QRS/-X TRANSISTOR or 2PC4081/R/-X
D1401 RD4.3ES/B2/-T2
TRANSISTOR
ZENER DIODE or MTZJ4.3B
D1402 1SS133 or 1N4148M
R1401 NRSA02J-181X
ZENER DIODE
DIODE
DIODE
MG RESISTOR
R1402 NRSA02J-101X
R1404 NRSA02J-182X
R1406 NRSA02J-471X
R1407 NRSA02J-272X
R1408 NRSA02J-122X
R1410 NRSA02J-241X
R1411 NRSA02J-152X
R1413 NRSA02J-471X
R1414 NRSA02J-821X
R1415 NRSA02J-221X
R1416 NRSA02J-104X
R1417 NRSA02J-101X
R1418 NRSA02J-471X
R1421 NRSA02J-331X
R1426 NRSA02J-561X
R1427 NRSA02J-333X
R1428 NRSA02J-393X
R1429 NRSA02J-152X
R1430 NRSA02J-222X
R1431 NRSA02J-821X
R1432 NRSA02J-182X
R1433 NRSA02J-510X
R1434 NRSA02J-153X
R1435 NRSA02J-223X
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
180Ø,1/10W
100Ø,1/10W
1.8kØ,1/10W
470Ø,1/10W
2.7kØ,1/10W
1.2kØ,1/10W
390Ø,1/10W
1.5kØ,1/10W
470Ø,1/10W
820Ø,1/10W
220Ø,1/10W
100kØ,1/10W
100Ø,1/10W
470Ø,1/10W
390Ø,1/10W
560Ø,1/10W
33kØ,1/10W
39kØ,1/10W
1.5kØ,1/10W
2.2kØ,1/10W
820Ø,1/10W
1.8kØ,1/10W
51Ø,1/10W
15kØ,1/10W
22kØ,1/10W
R1441 NRSA02J-682X
R1442 NRSA02J-682X
R1446 NRSA02J-102X
R1447 NRSA02J-102X
R1448 NRSA02J-102X
R1449 NRSA02J-102X
R1450 NRSA02J-102X
R1452 NRSA02J-471X
R1453 NRSA02J-102X
R1454 NRSA02J-102X
R1455 NRSA02J-681X
R1458 NRSA02J-681X
R1459 NRSA02J-681X
R1460 NRSA02J-273X
R1461 NRSA02J-121X
R1463 NRSA02J-101X
VR1401 QVZ3521-103Z
C1401 QEKJ1CM-336
C1402 NCB21HK-103X
C1403 QEKJ0JM-337
C1404 NCF21EZ-104X
C1405 NCF21EZ-104X
C1406 NCB21HK-103X
C1407 NDC21HJ-680X
C1408 NDC21HJ-330X
C1410 QEKJ1EM-475
C1411 NCF21EZ-104X
C1412 NDC21HJ-680X
C1413 NDC21HJ-330X
C1415 NCF21EZ-104X
C1416 QEKJ1CM-106
C1417 NCF21EZ-104X
C1421 NDC21HJ-330X
C1422 NDC21HJ-680X
C1423 NCF21EZ-104X
C1424 NCB21HK-103X
C1425 NCB21HK-103X
C1426 NDC21HJ-390X
C1428 NDC21HJ-220X
C1429 QEKJ0JM-337
C1430 NCF21EZ-104X
C1432 NCF21CZ-105X
C1433 NCF21EZ-104X
C1435 NCF21EZ-104X
C1436 NCF21EZ-104X
C1437 NCF21EZ-104X
C1438 NCF21EZ-104X
C1439 NCF21CZ-105X
C1440 NCF21EZ-104X
C1441 NCF21EZ-104X
C1442 NCF21CZ-105X
C1444 NCF21EZ-104X
C1445 NCF21EZ-104X
C1446 QEKJ0JM-107
C1447 NCF21EZ-104X
C1448 QEKJ0JM-337
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
E CAPACITOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
MG RESISTOR
V RESISTOR,D/A LEVEL ADJ
E CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
6.8kØ,1/10W
6.8kØ,1/10W
1kØ,1/10W
1kØ,1/10W
1kØ,1/10W
1kØ,1/10W
1kØ,1/10W
470Ø,1/10W
1kØ,1/10W
1kØ,1/10W
680Ø,1/10W
680Ø,1/10W
680Ø,1/10W
27kØ,1/10W
120Ø,1/10W
100Ø,1/10W
33µF,16V
0.01µF,50V
330µF,6.3V
0.1µF,25V
0.1µF,25V
0.01µF,50V
68pF,50V
33pF,50V
4.7µF,25V
0.1µF,25V
68pF,50V
33pF,50V
0.1µF,25V
10µF,16V
0.1µF,25V
33pF,50V
68pF,50V
0.1µF,25V
0.01µF,50V
0.01µF,50V
39pF,50V
22pF,50V
330µF,6.3V
0.1µF,25V
1µF,16V
0.1µF,25V
0.1µF,25V
0.1µF,25V
0.1µF,25V
0.1µF,25V
1µF,16V
0.1µF,25V
0.1µF,25V
1µF,16V
0.1µF,25V
0.1µF,25V
100µF,6.3V
0.1µF,25V
330µF,6.3V
5-3
# REF No. PART No.
PART NAME, DESCRIPTION # REF No. PART No.
PART NAME, DESCRIPTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C1449 NCF21EZ-104X
C1450 NCF21EZ-104X
C1451 QEKJ1EM-475
C1452 NCF21EZ-104X
C1453 NCF21EZ-104X
C1454 NCF21EZ-104X
C1455 NCF21EZ-104X
C1459 NDC21HJ-470X
C1460 NDC21HJ-470X
C1461 NDC21HJ-470X
C1462 NDC21HJ-470X
C1463 QEKJ0JM-336
C1465 NDC21HJ-470X
C1466 NDC21HJ-470X
C1467 NDC21HJ-470X
C1468 NDC21HJ-101X
C1471 NCF21EZ-104X
C1472 NCF21EZ-104X
C1473 NCF21EZ-104X
L1401 QQL29BJ-100Z
L1402
L1403
L1404
L1405
QQL071J-6R8Y
QQL071J-6R8Y
QQL071J-6R8Y
QQL29BJ-100Z
L1406
L1407
QQL071J-330Y
QQL29BJ-100Z
LC1401 QQR0657-013Z
LC1402 QQR0657-010Z
SD1
SD2
LP30706-001B
LP30684-001B
CN1401 QGG2502K1-17
CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
E CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
COIL
COIL
COIL
COIL
COIL
COIL
COIL
NOISE FILTER
NOISE FILTER
SHIELD FRAME(S-VHS)
SHIELD CASE(S-VHS)
HEADER PIN,(1-17)MAIN
0.1µF,25V
0.1µF,25V
4.7µF,25V
0.1µF,25V
0.1µF,25V
0.1µF,25V
0.1µF,25V
47pF,50V
47pF,50V
47pF,50V
47pF,50V
33µF,6.3V
47pF,50V
47pF,50V
47pF,50V
100pF,50V
0.1µF,25V
0.1µF,25V
0.1µF,25V
10µH
6.8µH
6.8µH
6.8µH
10µH
33µH
10µH
(Sanwa)-V13S25/S25K/S25T
5-4
JVC SERVICE & ENGINEERING COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
Head office
East Coast
Midwest
West Coast
Atlanta
Hawaii
:
:
:
:
:
:
1700 Valley Road Wayne, New Jersey 07470-9976
10 New Maple Avenue Pine Brook, New Jersey 07058-9641
705 Enterprise Street Aurora, Illinois 60504-8149
5665 Corporate Avenue Cypress, California 90630-0024
1500 Lakes Parkway Lawrenceville, Georgia 30043-5857
2969 Mapunapuna Place Honolulu, Hawaii 96819-2040
(973)315-5000
(973)396-1000
(630)851-7855
(714)229-8011
(770)339-2582
(808)833-5828
JVC CANADA INC.
Head office
Montreal
Vancouver
:
:
:
21 Finchdene Square Scarborough, Ontario M1X 1A7
16800 Rte Trans-Canadienne, Kirkland, Quebec H9H 5G7
13040 Worster Court Richmond, B.C. V6V 2B3
(416)293-1311
(514)871-1311
(604)270-1311
S40895-03
Printed in Japan

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- VHS & S-VHS recording/playback
- Maximum recording time: 630 min EP
- Stereo Hi-Fi audio recording and playback
- Integrated tuner
- Programmable timer
- Remote control
- S-Video input/output
- Digital TBC/NR
- 3D-Memory