Panasonic FP-7718 7718, FP-7722 7722, FP-7728 7728, FP-7735 7735 Plain Paper Copier Operating Guide

 i
\
ft
fi
(FP-7722*/7728/7735) 7 — 7
* except FP-7722
Before operating this copier, please read The FP-7718/7722/7728/7735
these instructions completely and keep with options (See page 4)
this operating guide for future reference.
Table of Contents
ra
|
©
А ==
O)
—
O
—
©
de
Q
©.
O
Before operating
Making Copies
Options
:-< |[[|<
e
Troubleshooting
Operation Chart
Full Size Copying
E When copying the same size as the original (1:1)
Copy size and copy density are automatically selected
r
O
O
O
o
2 3
Number of copies
Load paper*
Original size Up to 999
(FP-7718/7722) -
Turn Power 7 ME
Switch On Position original Exposure Control
(See page 3) Press Print
+ The FP-7718 has only 1 paper drawer/tray 7
E Position of the original
e Face Down on platen and in ADF (FA-A505)
Face Up in -ADF (FA-A888)
® li the onginal 1s not positioned properly, a
portion of the original may not be copied
® For onginals smaller than invoice size, align with
center of left original guide and select invoice
(FP-7728/7735)
e For originals smaller than invoice size, use
Invoice key (FP-7718/7722)
Original Guide
MM Energy Saver mode
The FP-7718/7722/7728/7735 has functions for power saving while the copier 1s not in use
If you wish to use this feature, consult your key operator or service technician
Power Consumption Warm Up Time
Energy saver mode
FP-7718/7722 Approximately 85 Wh 30 Seconds
FP-7728 Approximately 105 Wh 30 Seconds
FP-7735 Approximately 130 Wh 30 Seconds
Auto off mode
FP-7718 Approximately 5 Wh 40 Seconds
FP-7722 Approximately 5 Wh 50 Seconds
FP-7728/7735 © Approximately 5 Wh 70 Seconds
Ш When manually selecting exposure control or original size:
( N
al
| 95
Las
Lo
(O
cs
o
pe
C
QO
с.
O
Select exposure control
РНОТОАСТО (1) Press the Light key to copy colored background
PHOTO or Dark key for hght image original etc ,
(2) Press the Photo/Auto Select key to copy photos
DARK me and halftones
AUTO — —Q =
|__|]
LIGHT ma
/
x
J
| Select original size
I Press Manual key
m The indicator lights up (Manual! mode)
indicator El MANUAL (E \
a (2) Select original size with Original Size key
PHOTO/AUTO A
Al E]
N J
® Benefits of Quantum™ Technology:
The FP-7718/7722/7728/7735 features Quantum™ Technology which utilizes an advanced form
of artificial intelligence to ensure optimal copy quality and performance under varying
environmental conditions, from a wide range of originals
HB Paper Drawer/Tray
(1 The paper drawer/tray Is designed to accommodate invoice, letter, letter R, legal and ledger
size paper To change the paper size, consult your service technician for proper instructions
(See page 22)
(2) The FP-7718 has only 1 paper drawer/tray
( NOTE > ® Remove stacked copies from the exit tray every 250 sheets
e When copying onto special paper, use the sheet bypass
(Letterhead, mailing labels, transparencies, etc ,) (See page 16)
Options
Components
I-ADF, Inverting Automatic
Document Feeder (FA-A888)
® To feed originals automatically
® For multi-size feeding
e For duplex copying
e For 2 in 1 copying
ADF, Automatic Document
Feeder (FA-A505)
e Tofeed originals automatically
(See page 30)
4 10/20 Bin Sorter
Hs > (FA-S280/S575/5615/S680)
(See page 31)
® To sort, group or stack copies
= = ZA ® To staple copies
FA-S615/5
LIT J (FA-S615/5680)
Iu Automatic Duplex Unit
SSN (See page 26)
J (FA-MADM6)
e For duplex copying
N > 7 3000 Sheet Large Capacity
Cassette (FA-MA301)
e 3000 sheets
HUT
у / 7
;
JF
M System Console (FA-DS72)
E Commonality of optional accessories ® To increase paper feed sources
(The FP-7728/7735 with options) and capacity
Storage Drawer X 1
® To Increase the number of
FP-7718|FP-7722|FP-7728|FP-7735 paper drawers, an optional
FA-A505 O O O O accessory 1s needed Consult
FA-A888 O O O O your service technician
Upper/middie stage Paper
FA-5280 A O O x drawer (FA-MA055)
FA-S575 x O O O Lower stage Paper drawer and
FA-S615 A O O X mounting kit
FA-S680 X O O O 7
FA-MADM6 X О O О The paper drawer/tray 15
designed to accommodate
FA-MA301 X X O O Invoice, letter, letter R, legal
FA-DS72 A O O O and ledger size paper To
change the paper size,
O YES XxX NO consult your service
A Combination use possible with mounting kit, technician for proper
consult your service technician Instructions (See page 22)
—
Table of Contents
Before operating
Precautions 6
Components B Control Panel 9
B Special Effects Panel/Communications Monitor 10
Making Copies
Common Features Ш Reduction or Enlargement Copying 12
Ш Zoom Copying 13
H Creative Features (Margin Shift Edge Book 2-Page Copy Mode) 14
№ Using the Sheet Bypass 16
Creative Features № OHP Interleaving 17
H Copy Access Program 18
№ Programming Copy Jobs 19
User Preset № User Preset 1 20
Bl Changing Paper Size, Skyshot Mode 22
№ User Preset 2 24
B ADU, Automatic Duplex Unit 26
E -ADF/ADF 28
Ш Sorter 31
Maintenance
Handling E Adding Paper _ 36
WM Adding Toner 38
HE Removing a Paper Misfeed 40
Checking BB Troubleshooting 48
Specifications
FP-7718/7722/7728/7735, FA-A505/A888 50
FA-S280/5575/S615/5680 51
FA-DS72, FA-MA301/MADM6 52
Le]
ral
с
QD
pue
ue
O
e
ju
O
К
Lo
La
|
Precautions
Æ Do not look directly at exposure lamp when
copying
E Do not turn the power switch off or open the front
panel during copying
e Do not drop paper clips or other metal objects into
the copier
№ Store toner, developer and paper in cool areas
with low humidity
e High quality paper of 16 Ibs - 24 Ibs (15 — 30 Ibs
via sheet bypass) may be used
© For optimum performance, It is recommended that
only Panasonic Brand supphes be used in the
copier
Ventilation
B The copier should be installed in a well-ventilated
area, to minimize the ozone density ип the air
M The FP-7718/7722/7728/7735 power consumption
1s 15 kW A properly wired (with ground),
dedicated, 15 A, 120 V AC outlet 1s required Do
not use an extension cord
Installation
H The copier should not be installed in areas with the
following conditions
® Extremely high or low temperature and humidity
Ambient conditions
Temperature 50°F — 86°F
Relative humidity 30% — 80%
e Area where temperature and humidity can change
rapidiy
Direct exposure to sunhght
Directly in air conditioning flow
In areas of high dust concentration
In areas with chemical fume concentration
e
e
o
© In areas of poor ventilation
e
e In areas with extreme vibration
e
With unstable or uneven conditions (floors, etc )
For U.S.A.
This equipment has been tested and found to comply with the lmits for a Class A digital device,
pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses, and can radiate radio frequency energy and, If
not installed and used in accordance with the instruction manual, may cause harmful
Interference to radio communications Operation of this equipment In a residential area 1s likely
to cause harmful interference in which case the user will be required to correct the mterference
at his/her own expense
Any unauthorized changes or modifications to this equipment would void the users authority to
operate this device
о
=
o
=
=
©
О
©
| =
a
Energy Star
( D
The FP-7718, 7722, 7728, & 7735 copiers comply with Tier 2 of the Environmental Protection
Agency's Energy Star Program This voluntary program specifies certain energy consumption
and usage standards for copiers The FP-7718, 7722, 7728, & 7735 will automatically “power
down” after a specified period of non-use The use of these Energy Star comphant copiers will
reduce energy consumption and ultimately benefit the environment
The default functions can be adjusted depending on your office requirements Please see
your authorized Panasonic copier dealer for more detalls
Control Panel
WE си сни Fa ны Ar 1
OEE;
INVOICE e 1 М
DOO \y-
эн = wf.
| Recall Key
Original Size Communications To recall the number of
Keys Monitor copies selected during
(See page 11) a copy run
Special Effects Copy Size Keys Quantity Keys Print Key
Panel (See page 12)
(See page 10)
No Contents Function
Energy Saver Key e Press to select the energy saver mode while the copier 1s not in
D use
® Press Energy Saver key again, to cancel and make copies
interrupt Key
3) ® Press interrupt key, then indicator will hght
Make other copy job
® Press Interrupt key again to continue origina! job
(3) | Reset Key
Press to reset all features to initial power-on state
@ | Clear/Stop Key
Press to stop copy run or clear copy count in display
Control Panel
10
Components
Specialenecio pane!
—
® (2) €) a)
MULTIFFEED CEGIN - ACCESS PHÉSET
о |9 | | @ | ZN
2PAGE
©
COPY o E COPIED ©
в
NON | =
o Ma A COPIED
Vi
| 1SIDED
а (0 “Se 700M > gil —®
2SIDED
| (В) MEMORY IN
7)
COPY MARGIN BOOK © `
= 9
(7) (M1) (M2
) р
an do
No Keys Referto || No Keys Refer to
Multi-Size Feeding Edge Mode P.14
D | eUsing i-ADF Р.29
@ | Book Mode P.15
Original Count do | Memory In/Job programs P.19
@ | (FP-7722/7728/7735) P 6 —
=| ® Using i-ADF and ADU Duplexing mode selection
2 in 1 mode (1) | (FP-7722/7728/7735) P.26
— ® Using ADU
(3) | Access P.18
User Preset P.20 _ .
> 2 Uso -ADF 50
(6) | OHP interleaving mode P.17 9
Zoom P.13 _ -
© в | Page copy/2 in 1 mode P.15, 30
@ | Margin Shift Mode P.14 selection
Communications Monitor
@ 3 DO 6 E 7
FP-7718/7722
A © i
AE CEL
FP-7728/7735
f
e Y / =
567 LIA
ol ° lo —
I (| =e _
m ето STAPLE ! I = a my Li MANUAL a — 0
w 3 SORT | | = . CE] PHOTO/AUTO
= 2 GROUP || [= . TI. = @ LEDGER Gl (@——#
© “377 paper TRAY ° ree] [een a
PAPER SIZE us сео STAPLE = e LETTER) DARK we
= 3 SORT = . nia 7 - 19)
oo = ZW GROUP = @-
FP-7718 FT | fapeR TRAY = i
Ф | PAPER SIZE LIGHT =
— T
12! (18 m do 7 @ 8)
No Indicator Referto || No Indicator Refer to
Adding P 36 Message Display
Р (FP-7728/7735)
(1) Toner P 38 (7) | Indicates procedures —
Staple (FP-7718/7722) P33,34 || | Р |
unctions, maintenance, etc ,
Replacing
Waste Toner Bottle P 39
(2) | Reduction Р 12 (8) | Exposure Indicator P3
(3) | Enlargement P 12 (9) | Paper Size Indicator ——
Service Call añ Paper Drawer/Tray Indicator
@ | Lights up when it's time for — — (7)
routine maintenance M | Paper misfeed location (e) P 40
(8) | Paper Misfeed P 40-47 Mode Select Indicator
Copy Count Display 12: e Sort P 32
6 | Indicates number of copies, — ar
zoom ratio and error code roup
No Keys Refer to No Keys Refer to
13 | Manual Key P3 de | Exposure Control (LIGHT) P3
de | PHOTO/AUTO P3 17 | Paper Drawer/Tray
145 | Exposure Control (DARK) РЗ d& | Mode Select Key P 32
11
Г.
с
J
a
М,
[Pal]
Le
©
ho
UT]
ss
LO,
e
QQ.
NH
Зы
O
bs
с
o
=
A
с
o
pe
C
ко
с
=
E
=
о
O
Reduction or Enlargement Copying
Winen copying Wilh Preset reos
NM There are 5 preset reduction and 4 preset enlargement modes.
ос 000
© OOOO
99 > 09006
TT.
1 2 3 Paper Tray Key A 5
Position Original size Select the copy size Number of Press Print
original (FP-7718/7722) (Landscape for letter size) copies
Example: Reduction
Original size Copy size
O
Orea ( LEDGER |—|LETTER
Oren CS
N The correct ratio is automatically selected.
(куске O
— Original size (%)
Original Copy size
size Ledger | Legal Letter | Invoice
Ledger 100 77 65 50
Legal 121 100 79 61
Letter 129 100 100 65
Invoice 200 155 129 100
— | D
ATTENTION ® Part of the image may be deleted if the direction of the original and copy paper do not
correspond.
e If a different paper size is desired, press the Paper Drawer/Tray Select key.
When Copy Size key is pressed, the ratio will return to preset position.
( NOTE ) ® To reset reduction or enlargement copying, press Reset key.
12
Zoom Copying
When copying with variable zoom ratios
HB A zoom ratio can be selected from 50% to 200% in 1% increments.
о © OOO
1 88 9000
о © QO0Q ©)
y y 5 0000
TTT
1 2 (374) 5 6
€
=
Position Select Original size Select desired Number of Press Print =)
original zoom ratio (FP-7718/7722) paper size copies Г
U o
un |!
ss
y! a
Fes
3 >
a
a Zoom Ratio 50% — 200% A 288
Press and hold the Zoom Down or Zoom Up
key
(Increase in 1% increments )
== DOWN
ZOOM
" ©
A
~
UP For enlargement
DOWN For reduction
IC
e Zoom ratio indication (See page 11)
FP-7718/7722 Copy count display
FP-7728/7735 Message display
ATTENTION e |f a different paper size is desired, press the Paper Drawer/Tray Select key
When Copy Size key Is pressed, the ratio will return to preset position
( NOTE > ® To reset zoom copying, press Reset key
13
Creative Features
Margin/Edge
(ID) Margin Shift Mode Edge Mode
Shifts image to right Creates a blank edge
2A
| =»
WS
The margin 1s initrally set at 10 mm The edge width 1s initrally set at 5 0 mm
Range can be set from 2 5 mm to 97 5 mm Range can be set from 5 0 mm to 95 mm
In 2 5 mm increments In 5 0 mm increments
O O О О ©
3 3 0000
О 0/0/0/0 @
Y ODOO
1 2 (3 4 5
Position Press Margin Orginal size Copy size Press Print
original or Edge key (FP-7718/7722) Number of copies
LL | Adjusting the width of void area
7 ;
Margin ( Press >
Hl Platen Ш -ADF
| |
Margın Key UP
In 25 mm
Increments
Edge Key + DOWN
ES
NLL | nme: OF
C NOTE ) ® [f Margin shift mode cuts off right side of image, use Margin reduction mode (95%,
93% or 91%) to create a margin (See page 21)
=
14
Book/2-Page Copy
Book Mode 2-Page Copy Mode
Eliminates dark inner binding shadows
Book mode 15 initially set at 20 mm Range can Copying two facing pages
be set from 2 5 mm to 97 5mm in 2 5 mm of a ledger size original on
Increments two separate letter size sheets
>
AN O O O O O =
ооо = 8 OOOO 3
ty 2° 0999 :
© y OOOO =
E 0
1 2 (3 4 5 6 ;
Position Press 2 (3) 4) Number of Press Print
original re Page size (Reduction or Enlargement) copies
Co py key (FP-7718/7722)
- Adjusting the width of void area (Book)
Ledger size original М Press
Center book | й
by length @
Center LI. and width
! according to Ke a)
| center marks y +
In 2 5 mm DOWN
= i= Increments
4
Original Guide Book K Y)
\ Ong $ таг ALU 7
C NOTE ) e Margin, edge and book modes
When adjusting the width of void area, press and hold the Margin, Edge or
Book key then press the Zoom Up or Zoom Down key
® То reset each mode, press the Edge, Margin, Book key again or Reset key
15
16
Using the Sheet Bypass
When copying on special paper, etc.
M For 2-sided copying or to copy on letterhead, mailing labels,
transparencies and odd-size paper, etc., or to use bypass as an
additional paper source.
Position original
Select original size (FP-7718/7722)
Open sheet bypass
eee
- Sheet Bypass
Puil out bypass tray until it stops
@ Place approximately 50 sheets of
Г рарег
Г «—Do not fill above
JJ Insert the paper unti! it stops
First copy side up
(2) Adjust the side guides
Incorrect adjustment may cause
paper to wrinkle, misfeed or skew
2
3
4
|
Side Guides
Press Print
( NOTE ) e The bypass has priority over the paper drawers/trays The copier automatically
selects the sheet bypass when paper 1s placed in the empty bypass tray
e Some types of mailing labels and transparency film may damage your machine
Please contact your service provider for advice regarding non-standard paper types
OHP interleaving
~
Inserting paper between Non Copied (Blank) Paper | Copied Paper
OHP film
1 1
ОНР OHP[®
oe |
Non copied (blank) paper (2)
6 copied paper ) OHP
\ | J
0
JC] _ A
O O О О O а
©
QQ 0000 НЕ
о o ООО os
© O O e +
OOO = E
|=) КО
a С а.
TT CE
| ue
Select OHP Place OHP Position Original size Press Print
interleaving (Sheet Bypass) — original (FP-7718/7722)
mode
A Press OHP interleaving key N
|| || — Non
cha) copiep OF |
= Non Copied Paper
Ja, NON
PEPE COPIED D
y — Copied Paper
17
Copy Access Program
MM This feature allows the monitoring of up to 100 (50: FP-7718/7722)
individual departments, etc., when activated UO will appear in the copy
count display.
| [Ua]
OO G——1—Reset Key
fa em ue ew my
| — Input the ID number
| ; (3 digit)
1
Message Display Copy Count Display
(FP-7728/7735)
(ID number will indicate )
Ce
O O
O O
O O
O O
Access Key
7
Making a copy.
Nu
Check total copy usage of
ali departments.
Check total copy usage of
a specific department.
(D Input the ID number
(2 Make copy
(3) Press Reset key to return to U0
(1) Press Access key
(2 Check display
Example 5,678 copies
FP-7718/7722 518.
4
FP-7728/7735 |Total count all dept
$$$$$ = 5678
(3) Press Reset key to return to UO
M Input the ID number
(2) Press Access key
Example Department code=1
1,234 copies
FP-7718/7722 [FA : == om
FP-7728/7735 | Copy count by dept
01 = 1234
(3) Press Reset key to return to UO
( NOTE ) ® The copy access program must be set-up by the service technician
18
Programming Copy Jobs
HB Two copy jobs can be programmed in memory (M1 or M2) for recall at a
later time.
о 0 — [À 000
ООО
O Massage Display ОО
O (ER-7728/7735) OO O
OL Keys Copy Count Display
(FP-7718/7722) -
(9) Memory In Key
( SN
To store a job in memory (1) Set up the copy job to be stored In
memory
(2) E Memory In Key
FP-7718/7722 The copy count display will flash
wh
=
+
i Bm
oa
© ©
ELO)
Co
=
Е
|
pau
—
er)
o
oa?
oa
FP-7728/7735 | Ready to program
select Mem #
9 (1) o >
To recall a job stored in M (мт) ог С
тетогу
The job stored in each memory location can be
changed If necessary
(2) Press Print
N и
C NOTE ) e When using the skyshot mode (M1 and M2 are turned ON), job memory
cannot be used
e Job memory mode will not be deleted even if power switch 1s turned off
® When storing a new job, the previously stored job will automatically be
deleted and the current job stored in its place
19
User Preset 1
B User Preset modes can change the initial copy mode, if necessary.
1. Operation
Copy Count Display (FP-7718/7722)
с SF | UPoi | 22
y y O O Message Display
7 O Ol (FP-7728/7735)
ен
|
UpeDown keys
e
Press User Select user preset — Change mitral Press Print
Preset key mode code number setting number*
2 Contents
Code Item Function Initial setting
UPOO | Paper size (0) Letter R (1) Legal й oper ole
or e Sets the paper size of each (2) Letter (3) Ledger y
c00 aper drawer (4) Invoice Consult service
pap technician
Paper size prionty (0) Letter (1) Letter R
UPO1 | @ Specifies the paper size of most | (2) Legal (3) Ledger 0
frequent usage (4) Invoice
ОРО2 Margin value default (0) 5 mm (1) 10 mm 1
® Selects the margin shift value (2) 15 mm (3) 20 mm
ОРОЗ Edge value default (0) 5 mm (1) 10 mm 0
® Selects the edge width (2) 15 mm (3) 20 mm
ОРО4 Book value default (0) 15 mm (1) 20 mm 1
® Selects the book void width (2) 25 mm (3) 30 mm
C NOTE D * To change initial setting number, zoom (Up*Down) keys are also available
e Check selected code number with message display (FP-7728/7735) or copy count
display (FP-7718/7722)
e Each code number 1s indicated as c00, c01, c02 , onthe FP-7718/7722 copy count
display
20
Code Item Function Imtral setting
Margin reduction ratio o o
UPOS | e Selects the reduction ratio in (0) Non (100%) (1) 95% 0
margin mode (2) 93% (3) 91%
Sorter mode default
UPOG | ® Determines the most frequent (0) Nonsort (1) Sort 0
usage mode (2) Staple sort (3) Group
Duplex mode default
0) No (1) 1] > (2]
UPO7 | e Determines the most frequent (
usage mode 3 (2) 12] =» (3) Book + )
2 in 1 copy ratio
UPOS | ® Selects whether to copy full size | (0) Fullsize (1) Reduction 1
or reduction in the 2 in 1 mode
Auto edge mode default
UPO9 | e Selecis whether or not to disable | (0) OFF (1) ON 1
Auto Edge Deletion
Skyshot mode default
0) OFF (1) M1, ON
UP10 | ® Enables or disables the use of ( 0
skyshot mode (2) M2, ON (3) M1, M2 ON
Manual add toner Toner rapid added after
UP11 | ® Allows the addition of toner as ICY © —
entering the number (1) and
determined by the operator
pressing Print key
UP12
to 18 (Reserved)
UP19 Set key operator code
e Input key operator ID number
( NOTE В % Auto Edge Deletion
To copy from the platen with the original cover or I-ADF open Normally, this
makes a copy with a solid (black) area around the original if the original is
smaller than the copy paper This mode eliminates the solid area
automatically
e Skyshot mode (UP10 or c10) disables the use of the other job run memory
21
aj
v
"e
Ф
ds
Q
ъ
QD
Nn
ие
User Preset 1
Example: Changing Paper Size
Æ The paper drawer/trays are designed to accommodate invoice, letter,
letter R, legal and ledger size paper. To change the paper size, consult
your service technician for proper instructions.
Perform following steps as shown below after any locking screws have been removed
FP-7728/7735 FP-7718/7722
oo | | |
— O O оО О
9 NM Q 9 pit 0000
О © 0000
——— Cee"
|
Press User Input the desired Select the desired
Preset key paper size paper drawer/tray *
(See page 20)
Paper Guide (9) Pull out the desired paper
drawer/tray
= Me = (1) Adjust paper guide @ to paper tength
>< © | (2) Adjust paper guide (® to paper width
Squeeze the stopper to move the
paper guide ® to the desired paper
SD Paper size
Stopper Guide b
Change the paper size indicator
У Take out and re-insert the indicator so
; the correct paper size 1s shown
- ÓN (Invoice size 1s on the back side)
> Neza"
Size indicator
C NOTE D + |f the paper drawer 1s not installed or 1s not inserted completely, the paper size
~ indication will not appear
SNA Lee
Ш By setting the check size (or other original smaller than letter size) in the
user preset mode, copying from small originals is possible without dark
areas around the image.
Setting of Skyshot mode by key operator
(1) Code No UP10 Input Function number 1, 2 or 3 (See page 21)
(2) Code No UP19 Input key operator ID number (See page 21)
(3 Code No UP32 Input a size (M1) (See page 25)
@ Code No UP33 Input another size (M2) if necessary (See page 25)
MM Operation
f Platen N
8 o O OO
—e|4 |+— Check O00
Center 8 ec It It SQ =
_ оо ODO i
N 7 Л
| T | >
[a
7
1 2 34 E
Position original Select M1 or M2 Number of Press Print
Letter size keys copies
will hght
С МОТЕ В ® If changing the sizes in memory, perform above steps (2) to (9)
e Toreset Skyshot mode, press Reset key
23
User Preset 2
For Key Operator
№ The UP20 - UP34 initial settings can be changed after entering the Key
Operator ID Number.
1 Operation
Copy Count Display (FP-7718/7722)
JL
© © O O Message Display © OG
O Ol (FP-7728/7735) ©
— |
| | | |
Press User Select code Enter key Select code Change initial Press Print
Preset key number 19 operator ID number setting
number (see contents)
2 Contents
Code Item Function Initial setting
UP20 Auto reset time (0) Non (1) 45 seconds 2
® Selects the reset time (2) 1 minute (3) 2 minutes
(0) 15 minutes (1) 30 minutes
UP21 Energy saver time (2) 60 minutes (3) 1 5 hours 0
® Selects the energy saver time | (4) 2 hours (5) 3 hours
(6) 4 hours
0) No (1) 30 minutes
Auto off time 2
UP22 (2) 60minutes (3) 1 5 hours _
e Selects the Auto off time (4) 3 hours (5) 4 hours 1 (FP-7718)
Exposure default
UP23 | e Determines whether to use 0) on (1) Auto 2
Auto Exposure
( NOTE ) *
24
Check selected code number, key operator ID number and initial setting with
message display (FP-7728/7735) or copy count display (FP-7718/7722)
Code Item Function Initial setting
(0) Japanese (1) English
Language default (2) German (3) French
® Selects the message
UP24 (4) Italian (5) Spanish 1
language of the display
(For FP-7728/7735) (6) Swedish (7) Finnish
(8) Dutch (9) Portugal
(0) Non
(1) Copier upper stage
Special paper tray 1 (2) Copier lower stage
UP25 | ® Sets the paper drawer for (3) System console upper stage 0
special (color) paper (4) System console middle stage
(5) System console lower stage
(6) LCC (7) Sheet bypass
UP26 | Special paper tray 2 same as UP25 О
UP27
to 30 (Reserved)
Maximum copy setting (0) Non (n) Sets
UP31 | & Determines whether to hmit Input limit number of copies О
number of copies (1 to 99) and press Print
M1, size Step 1
UP32 e Input a size in memory 1 for Input size Y and press Print 160 X 70
frequent usage size Step 2 (Y) (X)
(X Width Y Length) mm Input size X and press Print
M2, size
UP33 | e Input another size in memory | same as UP32 220 X 95
(Y}) (X)
2 for frequent usage
Department counter mode Select a function number
® Checks or changes all or (1,2 or 3) and press Print then Consult your
UP34 specified departments for change initial setting service
copy usage, copy limit and (1) Copy Count (2) Copy mit | technician
ID number* (3) Code number
* FP-7718/7722 = 50 1D numbers
FP-7728/7735 = 100 ID numbers
C NOTE ) e Direction of check
<= | Check
X width
Y length
25
Ll
et
e
и
-
Q.
=
D
A
и
Automatic Duplex Unit
FA-MADMS (FP-7722/7728/7735)
MM (1) > [2] Copy № [2] =} [2] Сору
From Copier Platen € 1-ADF From 2-sided originals to 2-sided copies
(From Copier Platen & -ADF/ADF) (Using 1-ADF)
Hair
Hi Ith
=
1
OOOO
OOOO
Da —— ;—
Position Select Press Original Count key Number of copies Press
orl Duplexing mode {{1] =» [2] copy/using ADF) Up to 50 Print
ginals
or fl} Return originals to ADF
( N
1-ADF В e [1| > [2] copy from Platen
When making 2 sided copies from odd
number orginals, the last copy remains
in the ADU Press Reset to feed last
copy out of the ADU
ADF/Piaten
After copies are made, position the next
original Press Print
A
C NOTE ) e Automatic margin shift mode
If the margin shift mode Is selected, copies of the back side of each original are
automatically shifted to the right (See page 14)
+ If you are using the FA-888 to make 2-sided copies from 1-sided originals, place
onginals face-up in the original feed tray and press the Original Count key Then,
reload onginals and press Print
26
HB Book = [2] Copy
From book originals to 2-sided copies
Ledger size originals only
(Facing Pages)
OOOO
OOOO
Position Select Select 2-Page Copy mode
original Duplexing mode E=E:
JL (m) (Book Format only)
7
Ledger size original
\
| Center book
by length
Center— | and width
| according to
\ center marks
VL ==
4
Book K
\_ ook mar »
e Make copies from last page in Facing pages
and Book Format mode
Number of copies
(Up to 50)
Press Print
( МОТЕ ) ® Press the reset key to feed out last copy existing in the ADU (Automatic
Duplex Unit)
27
=
=
=
x
2
o
=
©
O
2
T
=
O
nj
5
<T
28
Automatic Document Feeder
i-ADF (FA-A888)/ADF (FA-A505)
1 Features
M Automatic onginal feeding
e The -ADF/ADF tray can hold up to 50 onginals of 20 Ibs paper (30 onginals/legal, ledger)
it can accommodate onginals from invoice to ledger size
e Automatic original size detection
(2) Duplexing (FA-A888)
The 1-ADF allows you to perform two different types of duplexing automatically
(3) Multi-size feeding (FA-A888)
Different size originals to be copied full size (1 1) or same size (See page 29)
Copies
Originals
Full size Reduction Enlargement
Legal Legal Letter R/Invoice Ledger
Letter R Letter R Letter R/invoice Ledger
Ledger Ledger Letter R
Letter Letter Letter
@ 2 1 Copy (FA-A888)
® 2-sided original to 1-sided copies (See page 30)
(5) 2 in 1 copy (FA-A888)
_ To make a 1-sided copy (full size or reduction), from two 1-sided originals side-by-side
(See page 30)
2 Components
FA-A505
Face-Down
FA-A888
Face-Up
Sy
N=
Original Guides
Original Feed Tray
Adjust to width of original
Original Feed Tray
Original Size indicator
Original Guides
Adjust to width of original
«1 cc | | ]
OOO
="
1 (2)(3)(4) 56
Position Multi-Size Selectcopy Copy size Numberof Press Print
original Feeding mode copies
(FA-Ag88) —* Duplexing, etc,
(See page 30)
y a
( ÓN
Inappropriate originals M Press the Multi-Size Feed key
o Paper with a smooth surface such as art Different SIZE originals to be copied full
and coated papers Size (1 1) Or Same Size
e Transparencies
e Paste-ups
e Originals with a lead edge that 1s
“creased”, “folded”, “punched” or “glued”
e Pressure sensitive or carbon backed
papers
e Paper with excessive curl
e Stapled originals
ra
sc
v
=
=
©
O
-
o
pur
a
=
©
=
<
qu
LETTER
\ Xx р
« NOTE ) ® If you use the multi-size feed function on the 1-ADF, make sure that the
correct size paper is loaded in the copier before placing originals into the
-ADF
29
Automatic Document Feeder
i-ADF (FA-A888)
4 Creative Features 3 Original Count (2 in 1 copy)
1 6
1 2 4 56
Position original Select 2 1 copy or Copy size” Numberof Press Print
2 in 1 copy copies
2:1 Copy 21n 1 copy
7
From 2-sided originals to 1-sided copies From two (four) 1-sided originals side by
side to 1-sided (2-sided) copies
B
Ш
e
я Cn o
ey
=
2PAGE COPY
2mi E
In 211
copy = »ES
1SIDED COPY 1SIDED COPY
2 а (В)
Ш 2SIDED COPY
2SIDED COPY, В al
g —
\ (| + ARS
When making one 2-sided copy from four
1-sided originals, Select [1] + [2] copy mode
and press Original Count key
и
C NOTE ) * 21n 1 copy
For reduction or enlargement copy only
Sorter
10 Bin Sorter (FA-S280/S615), 20 Bin Sorter (FA-S575/S680)
1 Components
FA-S280 FA-S575
(For FP-7718/7722/7728) (For FP-7722/7728/7735)
|
\
1
FA-S680
(For FP-7722/7728/7735)
Add Staple Indicator Manual Staple Key
Manual Staple Key Flashes when staples Lights up
run out Р |
(See page 34) ress to staple
~~ copies in each bin
Nonsort Tray | =
= a FA-S615
- A (For FP-7718/7722/7728) | ;
S = E +. —]
INN — NN NDA
Bins De
г
|
Y
o
Stapler Section
Stapler Section
C NOTE ) When the overflow indicator appears on the copy count
O F display, remove excess copies from the bins, then press Mode
Select key to reset
31
Sorter
10 CASHES), (FASSTE
2. Usage
4
Position
original
OOOO
OOOO
000 O
300 Y
ООО ©
2
Select operating modes
(Press Mode Select key)
Original —
Guides
wm mm
—— Staple
Position
N
_
3)
— ООО
3 4
Number of Press Print
copies
—| Nonsort | bin (Nonsort tray/FA-S680).
| Sorted copies are stapled.
Staple Sort | (FA-S680/S615 and i-ADF/ADF)
1 copy of each orginal is
Sort placed into a separate bin.
| Multiple copies of each
| Group original are placed into
separate bins.
N
All copies are placed in the op
( NOTE ) *
32
To manually staple copies (FA-S5615/5680)
@ When using platen, the copies will not be stapled automatically, press Manual
Staple key after copying is complete. (See page 31)
(2) Size: Invoice to Ledger.
Number of copies: Up to 50 sheets, 20 Ibs. (20 sheets: FA-S615)
3 When adding staples
FP-7718/7722
- 4
A=
//
When the staple cartridge 1s
empty,
(M The indicator will ight
(FP-7718/7722)
(2) The message will appear
(FP-7728/7735)
Add staples
FA-S680
Pull sorter towards the left slowly
until it stops
Staple Cartridge
(1 Take out empty staple cartridge
(2) Install the new cartridge
Do not touch or move the staples
(3) Re-insert sorter
(2)
Staple Position
Check operations
Place some letter size paper into
stack tray
(2) Press the Manual Staple key and
check staple operation
( NOTE ) e Order staple cartndges through your servicing dealer
ATTENTION ® When staples are jammed, call service
33
Sorter
3 When adding staples
|
" + ~~
AEN Flashes
(1) Open stapler cover
(2) Push the stapler unit
(3) Pull the stapler unit until it stops
Take out empty staple cartndge
Prepare new staple cartridge
(Consumable)
Remove black staple cover
@ Insert staple cartridge until it clicks
(2) Push the stapler unit until it stops
(3) Close the stapler cover
VS
Check operations
(1) Place some letter size paper into the
top bin
(2) Press the Manual Staple key and
check staple operation
an + © N
C NOTE В * Order staple cartridges through your servicing dealer
For FA-S615
e Two spare cartridges can be stocked inside of stapler cover
r
5 When staples are jammed
@ Open stapler cover
(2) Push the stapler unit
(3) Pull the stapler unit until it stops
Check stapling section and follow
next steps.
Lift up stapler unit
D Press the plastic stopper
(2) Pull the metal tab
(3) Push the metal tab
@ Take out jammed staples
(5) Push the metal tab until it clicks
(6) Swing down the stapler unit to its
original position
a SS D N
(7) Push the stapler unit until it stops
(8) Close the stapler cover
35
36
Adding Paper
=] (FP-7718/7722)/Add paper (FP-7728/7735)
Ш 550 Sheet Paper Tray
Pull paper drawer/tray out of
copier
e The FP-7718 has only 1 paper
drawer/tray
Place paper into paper
drawer/tray
For better feeding, remove any wrinkled
or torn sheets
To change paper size of the paper
drawer/tray, see page 22
Make sure paper 1s not loaded
above overfill indicator located in
the paper drawer/tray
SS Overfill Indicator
@
> y a y + 1-sided copy
\ ¿| +
/
2-sided copy
Push paper drawer/tray back into
copier
ATTENTION # When making 2-sided copies without an automatic duplex unit, place the copies
face-up in the paper drawer/tray to the 2-sided overfill indicator
e When the staple sorter is used
Some papers may not be suitable for stapling Please consult your service technician
if you are unsure about the type of paper you are using
Ш 3000 Sheet Large Capacity Cassette (LCC)
(M Open the door
(2) The paper feed tray will go down
Do not touch the tray while ıt ıs
moving
Place paper into paper
drawer/tray
After tray stops, place paper neatly on to
tray
Letter size only (portrait)
Do not fill above red line
Up to 3000 sheets, 20 Ibs
Close the door
37
38
Adding Toner (5./[U13
I
ZA ¡dea
Tonér-Hopper Assembly
ce
Open front panel
Turn toner hopper assembly
® Turn empty toner bottle until it stops
(2) Slide empty toner bottle towards you
and remove
New Toner
Bottle
Shake well before using
10-15 times until the toner inside 1s
evenly distributed
Remove the cap from the bottle
Do not turn the shutter
BO Noa
| .. New Toner Bottle
(1) Insert new toner bottle to the hopper
assembly
(2) Turn the bottle until it stops, and
arrows are aligned
D @
\ “TA | =»
yo
У
Close front panel
ATTENTION
possible after unsealing
e For optimum copy quality use the recommended Panasonic toner Store
toner in a cool dark place Do not unseal toner before use Use it as fast as
Replacing the Waste Toner Bottle ("://U14])
TS ES Open waste toner bottle cover
Li 1 JO}
/
Slowly pull waste toner bottle
straight out
NQ ch
SAW
Do not squeeze the bottle
Close bottle wıth cap
Install new bottle
Do not insert the bottle from the top
> o
Close waste toner bottle cover
O1
ATTENTION ® Do not use toner in waste toner bottle
39
Removing a paper misteed
(CE77160)77222move (ER=7772 8/747:3 5)
Æ When a paper misfeed has occurred, the misfeed indicator and misfeed
position(s) will indicate on the communications monitor.
Оооо
| OOOO
FP-7728/7735 JL FP-7718/7722
Remove misfed paper or on,
[He
J ol B® e
в А С
ЕР-7718 ye De
JG
| _
—_ «—— e
— e >
y G ~~
® Paper Misfeed Positions
7
A: Paper Exit Area (See page 41)
B: Paper Transport Area (See page 42)
Copier C: Paper Entry Area (See page 42)
or LCC, Large Capacity Cassette (See page 44)
System Console D: Automatic Duplex Unit (See page 43)
For FP-7722/7728/7735
E: System Console (See page 44)
ADF _
-ADF F: ADF/i-ADF (See page 45, 46)
Sorter G: 10/20 Bin Sorter {See page 47)
40
Æ Paper Exit Area
mem]
ШИ
=
45
(1) Open front panel
(2) Move the sorter to the left if installed
(See page 47)
(3) Open exit cover
(1) Turn left paper clearing knob
(2) Remove misfed paper
Caution this fuser area may be hot
(Y Open the fuser guide
(2) Check that no misfed paper 1s
remaining
(3) Close the fuser guide
E E FA LP ELL TES ETA E LE LN E a]; A EE
(1) Close exit cover
(2) Close front panel
Slide the sorter against the copier
ATTENTION e The fusing area may be hot, so use caution when removing misfed paper
e The front panel must be opened prior to opening the exit cover
41
42
Removing a paper misfeed
8A, (FP-7718/7722)/Remove misfed paper (FP-7728/7735)
H Paper Transport Area/Paper Entry Area
Г 1]
[HTT
Open front panel
1) Lower lever a)
(2) Turn nght paper clearing knob
(3) Remove misfed paper
@ Close front panel
(D Open entry cover
(2> Remove misfed paper
(3) Close entry cover
ATTENTION ® Do not touch or scratch the surface of the drum
H Automatic Duplex Unit/except FP-7718
LE
pl
ro
or
De
ШИ
Pull out automatic duplex unit
(1) Open paper guide plate
(2) Remove misfed paper
(3) Close paper guide plate
ГО
Paper Guide
Plate
If misfeed 1s too far into the automatic
Pa duplex unit
| DA
A | 7 (M) Open paper transport section, until it
@ stops
A (2) Remove misfed paper
DINA 3) Close paper transport section
re
#2
~~ per Transport Area
Push automatic duplex unit back
N
ATTENTION ® When the misfeed indicators light at A, C and D, remove misfed paper from
A and C first then remove 1t in the ADU (D)
43
44
Removing a paper misfeed
8A, (FP-7718/7722)/Remove misfed paper (FP-7728/7735)
H System Console/Large Capacity Cassette
Г 1]
~J |
—_ Large Capacity
J Cassette
—
Sy
J System Console
вы 8
—
fa
System Console
(1 Open the paper feed cover
(2) Remove misfed paper
(3) Close the paper feed cover
d Cover
Large Capacity Cassette
(MD Hold the latch and slide the large
capacity cassette to the right
(2) Remove misfed paper
M Open the door
(2) Remove misfed paper
(3) Close the door
@ Return the large capacity cassette to
Original position
Ш i-ADF
[+ |]
FP-7728/7735
Remove misted ong
in ADF
Entry Area
(1) Open entry cover
(2) Remove misfed paper
(3 Close entry cover
M Open the 1-ADF
(2) Open entry cover
(3) Remove misfed paper
(9) Close the 1-ADF
Exit Area
(1) Open the 1-ADF
(2) Remove misfed paper
If paper 1s remaining on the platen
glass, remove |
If paper can not be removed
(3 Close the I-ADF
@ Open exit cover
(55 Remove misfed paper
(6) Close exit cover
ATTENTION e Check that the paper misfeed indicator disappears
45
Removing a paper misfeed
8A, (FP-7718/7722)
BM ADF
[=]
FP-7728/7735
Remove misfed ong
in ADF
[HTT
Open the ADF
Entry Area Platen Area Exit Area
Platen Area
NN _ (M Remove misfed paper
@ (2) Close the ADF
/ \
EN
Entry Area
3 Release Key
(» Push the Release key and remove
misfed paper
(2) Close the ADF
Exit Area
(M) Remove misfed paper
(2) Close the ADF
ATTENTION e Check that the paper misfeed indicator disappears
Bl Sorter
[LTT]
PE]
FP-7728/7735
Remove misfed paper
Pull sorter towards you slowly
until it stops
For FA-S575/S615
(1) Open transport cover (FA-S575)
(2) Remove misfed paper
(3) Close transport cover (FA-S575)
For FA-S680
Remove misfed paper
ver
For FA-S680
(1) Open transport cover
(2) Check that paper 1s removed
completely
(3) Close transport cover
Slide the sorter against the copier
ATTENTION e Check that the paper misfeed indicator disappears
47
Troubleshooting
Before you call service
| Check ) | Action )
Unit does not operate x
Check if the Power Switch 1s turned on and
Does the display light? mm) If the power plug 1s Inserted into the outlet
(See page 9) or
Press any key on contro! panel
Does the Energy saver key flash (or light)
and displays are turned OFF?
= Press Energy saver key on contro! panel
(See page 9)
(See page 9)
E Insert key counter or input access code
number (See page 4, 18)
и Close front panel
Do any of these codes
appear in the copy count
display? (See page 11)
E Insert sorter into copier (See page 47)
E Push automatic duplex unit back
Close entry or exit cover of copier
E (See page 41, 42)
E Close the paper feed cover
(See page 44)
Close the -ADF/ADF
E Close entry or exit cover of 1-ADF
(See page 45, 46)
E Remove copies from sorter
Close the stapler cover of the sorter
E (FA-S615) (See page 34, 35)
E Add toner (See page 38)
Replace the waste toner bottle
E (See page 39)
(to be continued) J
Comex)
( Action )
Unit does not operate
Do any of these codes
appear ın the copy count
dısplay? (See page 11}
Does display indicate and [E__| and
[| alternately? (See page 11)
Does paper misfeed indicator light? (84)
(FP-7718/7722)
Is message “Remove misfed paper” or
“Remove misfed ong in ADF” on the
e (FP-7728/7735)
017] mm»
[U18] mu
=» and press the Sorter Mode Select key
E
Close the transport cover of sorter
(FA-S680) (See page 47)
+
Department copy usage ıs limited, consult
key operator
Remove copies from the sorter bin(s),
(See page 32)
Turn copier off, then on If error code
does not go off, call service
E2-01 to E2-07 Select another cassette
to continue copy job
Remove misfed paper
(See page 40 — 47)
/
Copies are light ON
« Touch the “dark” key or touch the “Auto”
ney
Does the exposure indicator say “light key to choose the auto mode
Does U13 appear in the copy count |) Add toner (See page 38)
display?
7
©
Copies are marked
Is the copier platen glass or platen cover
dirty?
mm) Clean it
If the measures outlined above do not solve the problem, call Service
©
с
=
о
O
L
7
©
0
|
о
| =
pe
50
Specifications
E FP-7718/7722/7728/7735
Type
Desktop
Process
UltraMagnefine™ Toner
Multi Copy Speed
Letter size copies per minute
18 (FP-7718), 22 (FP-7722), 28 (FP-7728), 35 (FP-7735)
Maximum Copy Size
11” x 17” (Ledger size)
Void Ârea max 5 0 mm
Copy Size
Invoice, Letter, Letter R, Legal, Ledger via paper drawer/tray
4” х 6” — 11” x 17” via sheet bypass
Reduction Ratios
Preset 50%, 61%, 65%, 77%, 79%
Variable from 99% to 50% in 1% increments
Enlargement Ratios
Preset 121%, 129%, 155%, 200%
Variable from 101% to 200% in 1% increments
Paper Feed 550 sheet paper drawer plus 50 sheet Bypass
Automatic Switching
Paper Selection Automatic
Paper Weight 16 — 24 Ibs (15 — 30 Ibs via sheet bypass)
Quantity Selector
1-999 (99 FP-7718), Automatic Repeat, Automatic Reset to 1
Exposure Control
Automatic/Manuai plus Photo Mode
Toner Supply Automatic
Dimensions 23 9” (W) x 26 0” (D)x 22 9” (18 9” FP-7718) (H)
Weight 138 Ibs (FP-7718), 153 Ibs (FP-7722), 150 Ibs (FP-7728/7735)
Electrical Requirement
AC 120V, 60Hz, 12A
HE i-ADF (FA-A888), ADF (FA-A505)
Original Capacity
30 sheets/legal, ledger 50 sheets/invoice, letter
Paper Size
Invoice, Letter, Letter R, Legal, Ledger
Paper Weight
14 - 28 №5
Electrical Requirement
Supplied from copier
Dimensions 22 8” (W) x 18 9” (D) x 3 7” (H) without Tray (FA-A505)
23 6” (W) x 20 2” (D) x 4 7” (H) without Tray (FA-A888)
Weight 22 0 lbs (FA-A505)
(
26 4 Ibs (FA-A888)
Specifications are subject to change without notice
Hl 20 Bin Sorter (FA-S575/S680)
FA-S575 FA-S680 (Staple)
Paper Size Invoice/Letter/Letter R/Legal/Ledger | Invoice/Letter/Letter R/Legal/Ledger
Paper Weight 16 — 24 Ibs 16 — 24 Ibs
Number of Bins 20 20 Plus Nonsort tray
Bin Capacity
Non sort Top bin 150 sheets Nonsort tray 100 sheets
(90 Sheets/ADU) Bins 1-20 30 sheets
Bins 2-20 50 sheets (25 Sheets/Letter R, Legal, Ledger)
Staple sort 50 sheets (30 Sheets/Ledger)
(Except Invoice size)
Sort 50 sheets
0 sheets (30 Sheets/Ledger)
Group Top bin 150 sheets 50 sheets
Bins 2-20 50 sheets (30 Sheets/Ledger)
Electrical Requirements
Supplied from copier
Supplied from copier
Dimenstons 14 2” (W) x 19 2” (D) x 38 4” (H) 22 3" (W) x 20 9” (D) x 38 3” (H)
Weight 726 ibs 99 0 Ibs
E 10 Bin Sorter (FA-S280/5615)
FA-5280 FA-S615
Paper Size Letter/Letter R/Legal/Ledger Letter/Letter R/Legal/Ledger
Paper Weight 16 — 24 1bs 16 — 20 165
Number of Bins 10 10
Bin Capacity
Non sort Top bin 100 sheets Top bin 100 sheets
Staple sort 20 sheets/Letter,
— 15 sheets/Letter R or Legal,
10 sheets/Ledger
Son 30 sheets (20 sheets/Legal, Letter) 25 sheotoogal. 10 rote B. dger
Group 20 sheets (15 sheets/Legal, Letter) 20 sheets (10 sheets/Ledger)
Electrical Requirements
Supphed from copier
Supplied from copier
Dimensions
17 6” (W) x 17 8” (D) x 8 8” (H)
13 17 (W) x 22 0” (D) x 14 1” (H)
Mass (Weight)
17 6 Ibs
22 O lbs
Specifications are subject to change without notice
о
=
o
po
©
Q
. E
D
O.
a
Specifications
H System Console (FA-DS72)
"oa
a EA
Combination Storage Drawer x 1
Paper Size . invoice, Letter, Letter R, Legal, Ledger
Paper Weight 16 — 24 Ibs
Electrical Requirements Supplied from copier
Dimensions | 23 9” (W) x 25 0” (D) x 16 4” (H)
Weight 47 7 Ibs
BM Large Capacity Cassette (FA-MA301)/Automatic Duplex Unit (FA-MADM6)
FA-MA301 FA-MADM6
Paper Size Letter Invoice, Letter, Letter R, Legal, Ledger
Paper Weight 16 — 24 165 16 — 24 Ibs
Paper Capacity Maximum 3000 sheets, 20 Ibs Maximum 50 sheets, 20 Ibs
Electrical Requirements Supplied from system console Supplied from copier
Dimensions 11 4” (W) x 17 5” (D) x 20 4” (H) —
Weight 30 8 Ibs —
Specifications are subject to change without notice
U.S.A. only
4 N
WARRANTY
“PANASONIC OFFICE PRODUCTS COMPANY MAKES NO WARRANTIES, GUARANTEES OR
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS
PANASONIC COPIER, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
PANASONIC OFFICE PRODUCTS COMPANY ASSUMES NO RISK AND SHALL NOT BE
SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS
SUSTAINED BY THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS
PANASONIC COPIER SEE YOUR DEALER FOR DETAILS OF DEALER'S WARRANTY ”
N | _
For Service Call
Panasonic Office Products Company
A unit of Matsushita Electric Corporation of America
Plain Paper Copier Division
Two Panasonic Way, Secaucus, NJ 07094
Matsushita Electric of Canada Limited
5770 Ambler Drive, Mississauga,
Ontario Law 2T3
FFPTD0757 Printed in Japan
September 1996
50996-0