Neutrik BNC rearTWIST Large Assembly Instruction

Neutrik BNC rearTWIST Large Assembly Instruction

Below you will find brief information for BNC cable connector NBLC75BVZ17, BNC cable connector NBLC75BSX14. These connectors are used for connecting audio and video equipment. They are designed to be used with coaxial cable. These connectors are durable and reliable, and they can be used in a variety of applications.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

NEUTRIK BNC cable connector NBLC75BVZ17, NBLC75BSX14 Assembly Instruction | Manualzz

R

ASSEMBLY INSTRUCTION

Rear Twist BNC - “Large”

|

75 W

Crimp version

A

B

C

D

NBLC75BVZ17:

NBLC75BSX14:

Boot

X

Labeling

Crimp ferrule

A: 20 .787” ]

B: 9 .354” ]

A: 19 .748” ]

B: 9 .354” ]

C: 6 .236” ]

A Slide the boot onto the cable

- Position the labeling to the cabelend

B Slide the crimp ferrule onto the cable

C Prepare cable as shown

- Use an adjustable coaxial cable stripper

D Spread the braided shield

- slide the spacer onto the center conductor

E

F

G

Crimp the pin

- position the pin on the center conductor

- crimp the pin with the tool

(For best crimping-results it is recommended to use the original Neutrik crimp tool

- HXBNC with the corresponding insert or hexcrimp acc. to IEC 803-W (SW 1.75) or squarecrimp acc. to IEC 803-2 (SW 1.6)

- Pin can also be soldered (Optional)!

- Straighten the pin if misaligned.

Insert the cable into the connector body

Slide the crimp ferrule over the shield to the front and push the cable and leading ferrule to it`s end position until you hear a snap noise.

Don't damage the foil!

(if existing)

Spacer

E

CRIMP

OPERATION!

Pin flush to the spacer

F

H

H

G

X

I

Please note:

Position the connector body flush with the die face.

H Crimp the ferrule with the tool

(For best crimping-results it is recommended to use the

original Neutrik tool - HXBNC with the corresponding insert)

I Snap the boot onto the connector body

NEUTRIK AG

NEUTRIK USA Inc.

( )

LI

USA

UK

T: +423

T: +1

/

704

237

/

24 24

972 3050

F: +423

F: +1

/

704

232 53 93

/ 438 9202

T: +44 1983 / 811 441 F: +44 1983 / 811 439

NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830

NEUTRIK France

NEUTRIK Tokyo Ltd.

FR

JP

NEUTRIK Hong Kong Ltd. HK

I 18.06.2013

Data subject to change without prior notice. 2013 NEUTRIK . ALL RIGHTS RESERVED.

www.neutrik.com

T: +33 1 / 4131 6750

T: +81 3 / 3663 4733

T: +852 / 2687 6055

F: +33 1 / 4131 0511

F: +81 3 / 3663 4796

F: +852 / 2687 6052

R

advertisement

Key Features

  • Rear twist
  • Crimp version
  • 75Ω
  • Durable
  • Reliable
  • Coaxial cable
  • Audio and video equipment

Frequently Answers and Questions

What is the best way to crimp the pin?
It is recommended to use the original Neutrik crimp tool - HXBNC with the corresponding insert or hexcrimp acc. to IEC 803-W (SW 1.75) or squarecrimp acc. to IEC 803-2 (SW 1.6).
Can the pin be soldered?
Yes, the pin can also be soldered (Optional)!
What should I do if the pin is misaligned?
Straighten the pin if misaligned.

Related manuals

Download PDF

advertisement