Samsung DVD-E237 User manual

DVD PLAYER
DVD-E137A
DVD-1010
DVD-E137B
DVD-E237
DVD-E337K
DVD-E437K
DVD-E537K
AU
AK68-00141L
Precautions
Precautions
1. Setting up
1
Ensure that the mains supply in your house complies with that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not
covered. Do not stack other, or heavy devices on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player ensure the disc
tray is empty. This player is designed for continuous use.
Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In
order to separate the player completely from the mains,it has to be disconnected by unplugging the
main plug, especially when left unused for a long period of time.
2. For your safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other opening to look inside the player.
3. Caution
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess
heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...).
Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is
for personal use only. If your player or disc has been stored in a cold atmosphere for example
during transportation in the winter, wait for approximately 2 hours until they have reached room
temperature, before use.
2
3
4
5
4. Disc
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place
disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean
disc if necessary, wipe from the centre to the border. Always put disc back into their cases after
playing and store in vertical position. Always place the disc properly into the tray using the proper
guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent,
if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a
circular motion, since circular scratches are likely to occur and could cause noise during playback.
5. Environmental info
Batteries: The battery used in this product contains chemicals that are harmful to the environment.
Do not dispose of batteries in the general domestic waste. It is recommended that the replacement
of the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of
as domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
Before you start
Table of contents
SETUP
Setup
CONNECTIONS
General Features ........................................................................................................6
Disc Type and Characteristics ......................................................................................7
Description-Front Panel ................................................................................................8
Display Indicators ....................................................................................................10
Description-Rear Panel ..............................................................................................11
Tour of the Remote Control ........................................................................................14
Accessories
Connections
Choosing a Connection ..............................................................................................20
Easy Remote Control
(DVD-E237/DVD-E337K/
DVD-E437K/DVD-E537K only)
Batteries for
Remote Control (AA Size)
Basic Functions
Playing a Disc ............................................................................................................22
Using the Search & Skip Functions ..........................................................................24
Using the Display Function ........................................................................................25
Using the Disc and Title Menu ..................................................................................26
Using the Function Menu ..........................................................................................27
Repeat Play ................................................................................................................28
BASIC
FUNCTIONS
Remote Control
Advanced Functions
Install Batteries in the
Remote
3
Replace the battery cover.
• Check the polarity + - of the
batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked
by obstacles.
• Check if there is any fluorescent
lighting nearby.
Karaoke Functions
Beginning Karaoke Functions ..................................................................................43
Reserving a Song ......................................................................................................44
Vocal Function ..........................................................................................................45
CHANGING
SETUP MENU
aligned correctly.
If remote doesn’t operate
properly:
Adjusting the Aspect Ratio (EZ View) ........................................................................29
Slow Repeat play ........................................................................................................31
Selecting the Audio Language ....................................................................................32
Selecting the Subtitle Language ................................................................................33
Changing the Camera Angle ......................................................................................34
Using the Instant Replay/Skip Function ....................................................................35
Using the Bookmark Function ....................................................................................36
Using the Zoom & 3D Sound Functions..........................................................................37
MP3/WMA Play ..........................................................................................................38
Program Play & Random Play ....................................................................................40
Picture CD Playback ..................................................................................................41
KARAOKE
FUNCTIONS
the battery cover on the back
1 Open
of the remote.
two AA batteries. Make sure
2 Insert
that the polarities (+ and -) are
Video/Audio Cable
ADVANCED
FUNCTIONS
User’s Manual
Changing Setup menu
REFERENCE
Using the Setup Menu ................................................................................................46
Setting Up the Language Features ............................................................................47
Setting Up the Audio Options ....................................................................................49
Surround Sound Speaker Setup ..............................................................................50
Setting Up the Display Options ..................................................................................51
Setting Up the Parental Control..................................................................................53
Controlling a TV with the remote ..............................................................................54
Reference
Troubleshooting ..........................................................................................................55
Specifications ..............................................................................................................56
4
5
General Features
Screen
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
EZ VIEW
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
MP3/WMA
This unit can play discs created from
MP3/WMA files.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
DVD
12 Cm
Audio
+
Video
8 Cm
VIDEO-CD
12 Cm
Audio
+
Video
Easy Remocon (DVD-E237/DVD-E337K/
DVD-E437K/DVD-E537K only)
You can easily operate this player by combining
only the functions that are frequently used.
AUDIO-CD
NOTE
* Discs which cannot be played with this player.
• DVD-R, +R
• DVD+RW, -RW
Characteristics
Single-sided • DVD contains excellent
240 min.
sound and video due to
Double-sided
Dolby Digital and MPEG-2
480 min.
system.
Single-sided • Various screen and audio
functions can be easily
80 min.
Double-sided selected through the onscreen menu.
160 min.
74 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
* Ability to play back may depend on recording conditions.
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
Disc Markings
• CD-RW
~
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
6
Recording Disc Size
Max.
Playing Time
Types
Instant Replay
This function is used to replay the previous
10 seconds of the movie from the current
position.
Instant Skip
This function skips playback ahead 10 seconds.
SETUP
Excellent Sound
Dolby Digital, a technology developed by
Dolby Laboratories provides crystal clear
sound reproduction.
Disc Type and Characteristics
• Play
Region
Number
PAL
• PAL broadcast
system in U.K,
France,
Germany, etc.
STEREO
• Dolby
Digital disc
DIGITAL
SOUND
• Stereo disc • Digital
Audio disc
• DTS disc
• MP3 disc
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
7
Description-Front Panel
Description-Front Panel
7
6
1
SETUP
DVD-E437K/DVD-E537K
DVD-E137A/DVD-1010
8 9 10 11
12
1
2 3 4 5
6
7
8 910 11 12
13
DVD-E137B
Front Panel Controls
1. STANDBY/ON
• When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
2. MIC 1
• Connect microphone 1 for Karaoke functions.
7
6
1
8 9 10 11
12
DVD-E237
3. MIC 2
• Connect microphone 2 for Karaoke functions.
4. VOLUME
• Use to adjust microphone volume level.
5. DIGITAL ECHO
• Use to adjust echo delay.
6. DISC TRAY
• Load the disc here.
7. DISPLAY
• Operation indicators are displayed here.
6
1
7
8 9 10 11
12
DVD-E337K
8. OPEN/CLOSE
• Press to open and close the disc tray.
9. PLAY/PAUSE (
)
• Begin or pause disc play.
10. STOP (
)
• Stops disc play.
11. SKIP (
/
)
• Use to skip a scene or music.
12. EZ VIEW
• Easy View can convert Letter Box images to full screen viewing on your conventional TV.
1
8
2 3 4 5
6
7
8 9 10 11
12
13. SHUTTLE
• Use during DVD and CD play to fast forward or reverse.
9
Display Indicators
Description-Rear Panel
SETUP
DVD-E537K
1
2
3
1
Front Panel Display
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as
PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
2
3
4
5
6
7
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input jacks.
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
4. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The COMPONENT
must be selected in the VIDEO OUT SELECT.
7. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is
selected COMPONENT may not work.
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
10
11
Description-Rear Panel
Description-Rear Panel
SETUP
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
1
2
3
4
5
6
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher
quality picture. The S-Video must be selected in the VIDEO OUT SELECT.
5. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and
Y video. Along with S-Video, Component Video provides the best picture quality.
The COMPONENT must be selected in the VIDEO OUT SELECT.
DVD-E337K/DVD-E437K
1
2
3
4
6. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If COMPONENT is selected, S-Video may not work. If S-Video is
selected, COMPONENT may not work.
5
6
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
12
13
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237
1
DVD Function Buttons
1. DVD POWER Button
13
16. PLAY/PAUSE Button (
• Turns the power on or off.
2. NUMBER Buttons
2
17. SKIP Buttons (
3. STEP Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
9
14
5. EZ VIEW Button
15
6. SEARCH Buttons (
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
/
)
• Allows you to search forward/backward through a
disc.
16
17
18
7. STOP Button (
19
20
9. TITLE MENU Button
)
8. DISC MENU Button
• Brings up the Disc menu.
• Brings up the Title menu.
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
11. BOOKMARK Button
1
21
10
11
12
22
23
24
25
26
27
12. MENU Button
17
7
19
)
18. RETURN Button
• Returns to a previous menu.
4. I.REPLAY Button
8
/
• Use to skip the title, chapter, or track.
• Advances play one frame at a time.
3
4
5
6
7
)
• Begin/Pause disc play.
• Brings up the DVD player’s setup menu.
16
8
13. OPEN/CLOSE Button
20
15. I.SKIP Button
19. INFO Button
• Displays the current disc mode.
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions on
a disc.
25. REPEAT A-B Button
• Use to mark a segment to repeat between A and B.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
• This function skips playback ahead 10 seconds.
(Easy Remote Control)
DVD-E237 Only
14
15
Tour of the Remote Control
Tour of the Remote Control
DVD Function Buttons
1. DVD POWER Button
1
13
16. PLAY/PAUSE Button (
• Turns the power on or off.
17. SKIP Buttons (
• Advances play one frame at a time.
• This function is used to replay the previous 10
seconds of the movie from the current position.
8
9
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
6. SEARCH Buttons (
/
)
• Allows you to search forward/backward through a
disc.
16
17
18
7. STOP Button (
19
20
9. TITLE MENU Button
)
8. DISC MENU Button
• Brings up the Disc menu.
• Brings up the Title menu.
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
11. BOOKMARK Button
21
10
11
12
22
23
24
25
26
27
12. MENU Button
1
• Brings up the DVD player’s setup menu.
17
7
19
16
8
)
18. RETURN Button
• Returns to a previous menu.
4. I.REPLAY Button
15
/
• Use to skip the title, chapter, or track.
3. STEP Button
14
)
• Begin/Pause disc play.
2. NUMBER Buttons
2
3
4
5
6
7
SETUP
DVD-E337K/DVD-E437K
13. OPEN/CLOSE Button
19. INFO Button
• Displays the current disc mode.
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions on
a disc.
25. KARAOKE Button
• Use to begin Karaoke functions.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
15. I.SKIP Button
20
• This function skips playback ahead 10 seconds.
(Easy Remote Control)
16
17
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD-E537K
DVD Function Buttons
1
18
2
19
1. DVD POWER Button
• Turns the power on or off.
2. ZOOM Button
• Enlarges the DVD picture.
3
4. MENU Button
22. CHANNEL Buttons
21
22
23
24
10
25
26
24. PLAY/PAUSE Button (
6. TV/VIDEO Button
11
27
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
)
10. DISC MENU Button
• Brings up the Disc menu.
11. TITLE MENU Button
• Brings up the Title menu.
13
14
15
28
29
30
31
32
12. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT buttons)
1
• This button functions as a toggle switch.
25
9
27
24
10
12
16
17
25. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
26. RETURN Button
8. EZ VIEW Button
12
)
• Begin/Pause disc play.
• This function is used to replay the previous 10
seconds of the movie from the current position.
9. STOP Button (
23. I.SKIP Button
• This function skips playback ahead 10 seconds.
7. I.REPLAY Button
5
6
7
8
9
20. 3D Button
21. OPEN/CLOSE Button
• Brings up the DVD player’s setup menu.
20
19. SLOW Button
3. NUMBER Buttons
5. VOLUME Buttons
4
18. TV POWER Button
13. CLEAR Button
• Use to remove menus or status displays from the
screen.
• Returns to a previous menu.
27. INFO Button
• Displays the current disc mode.
28. ANGLE Button
• Use to access various camera angles on a DVD.
29. MODE Button
• Allows you to program a specific order.
30. SUBTITLE Button
31. AUDIO Button
• Use this button to access various audio functions on
a disc.
32. KARAOKE Button
• Use to begin Karaoke functions.
14. BOOKMARK Button
15. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
16. JOG DIAL
• Operates frame by frame play. In CD mode,
performs track search.
17. SHUTTLE DIAL
(Easy Remote Control)
18
• Performs fast motion play.
19
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Basic Audio
Method 2
Method 3
Good
picture
Better
picture
Best
picture
TV
Connection to an Audio System
Method 1
Method 1
Method 2
Method 3
S-Video
Cable
AV Cable
AUDIO
SYSTEM
OR
2ch Amplifier
Audio Input Jacks
CONNECTIONS
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
5.1ch Analog Amplifier
Audio Input Jacks
Video
Cables
OR
Dolby Digital Decoder
Digital Audio Input Jacks
R2
L2
R1
L1
DVD
PLAYER
1
e.g) DVD-E537K
Audio Output
Jacks
OR
DVD
PLAYER
Analog Audio Out
S-Video Jack
Method 1
DVD Player + TV with Video Input Jack
Method 2
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
Method 3
DVD Player + TV with Component Video Jacks
(If COMPONENT is selected in the VIDEO OUT SELECT.)
e.g) DVD-E537K
Mixed Audio Out
Video Output
Jack
Digital Audio Out
Component Video
Jacks
NOTE
• If COMPONENT is selected, S-Video will not work.
• If S-Video is selected, COMPONENT will not work.
20
21
Playing a Disc
Playing a Disc
7 Step Motion Play (Except CD)
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
1 Press the OPEN/CLOSE button.
a disc gently into the tray with the disc’s label
2 Place
facing up.
8 Slow Motion Play (Except CD)
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K : Press the
button on the
remote during PAUSE or STEP mode. By pressing the
button, you can select slow motion play for 1/8,
1/4 or 1/2 of normal speed.
DVD-E537K : Press and hold the
button to choose the play speed between 1/8X, 1/4X and 1/2X of
normal during PAUSE or STEP mode, or press the SLOW button you can play slow motion for 1/8 of
normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
) to resume normal play.
- When playing a DVD/VCD, reverse slow motion play will not work.
The STANDBY indicator light goes out and the tray opens.
the PLAY/PAUSE (
3 Press
button to close the disc tray.
4 Stopping Play
5 Removing Disc
6 Pausing Play
Press the STOP (
) button or OPEN/CLOSE
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
) again,
it will pick up where you left off. (unless the disc is removed, the STOP (
) button is pressed twice or the
player is unplugged.)
NOTE
) button during play.
Press the OPEN/CLOSE button.
Press the PLAY/PAUSE (
) or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
) button once again.
22
RESUME function
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function) (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237 only)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
)
button to resume normal play.
• This
icon indicates an invalid button press.
23
BASIC
FUNCTIONS
Play
SELECT MENU LANGUAGE
DVD-E537K : If turning Jog Dial, you can view one by one.
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K : Press the STEP button on the
remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
Using the Search & Skip Functions
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Searching through a Chapter or Track
1
DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K : Press the
or
button on the remote and press again to search at a faster speed on the DVD, VCD, CD.
DVD-E537K : Turn the shuttle dial of remote control during disc play.
When Playing a DVD/VCD/CD
1 During play, press the INFO button on the remote.
the UP/DOWN buttons to select the desired
2 Use
item.
DVD
Title
3
Use the LEFT/RIGHT buttons to make the desired
setup, then press ENTER.
01
Chapter 02
Time
Audio
0:00:13
ENG 5.1CH
Subtitle Off
3D Sound
Off
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
ENTER
VCD
DVD 2X, 4X, 8X, 16X, 32X, 128X
make the screen disappear, press the INFO
4 Tobutton
again.
VCD 4X, 8X
CD
DVD
BASIC
FUNCTIONS
DVD-E437K/DVD-E537K : Turn the shuttle dial on the front can a multiple-speed operation if
desiring to use the key on the front.
Using the Display Function
2X, 4X, 8X
VCD
Track 01
Time 0 : 0 0 : 4 8
To access the desired title when there is more than
Title one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Skipping Tracks
3D Sound
Off
ENTER
Most of DVD discs are recorded in chapters so that
Chapter you can quickly find a specific passage (similar to
1
During play, press the
or
button.
• When playing a DVD, if you press the
button, it moves to the next chapter.
If you press the
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you
press the
button, it moves to the next track. If you press the
button,
it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and you press the
button, it moves forward 5 minutes. If you press the
button, it moves
backward 5 minutes.
tracks on an audio CD).
Allows playback of the film from a desired time.
Time You must enter the starting time as a reference.
Refers to the language of the film soundtrack. In the
Audio example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
CD
CD
Track 01
Time 0 : 0 0 : 4 8
3D Sound
Off
ENTER
Refers to the subtitle languages available in the disc.
Subtitle You will be able to choose the subtitles language or, if
you prefer, turn them off from the screen. A DVD disc
can have up to 32 different subtitles.
A surround sound effect is generated using only two
3D Sound front speakers.
NOTE
* When in VCD 2.0 mode (MENU ON mode), this function
does not work. Using DISC MENU button in VCD 2.0, select
Menu On/Off.
24
25
Using the Disc and Title Menu
Using the Function Menu
Using the Disc Menu
the playback of a DVD disc, press the
1 During
MENU button on the remote.
Using the Function Menu
Disc Menu
2
Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
1 Press the MENU button during playback.
the UP/DOWN buttons to highlight Function,
2 Use
then press the RIGHT or ENTER button.
DVD
Press ENTER key
for Disc Menu
Title Menu
Info
Zoom
Title Menu
Function
Bookmark
Repeat
EZ View
ENTER
RETURN
MENU
3
Function selection screen appears, Info, Zoom,
Bookmark, Repeat and EZ View.
Setup
ENTER
RETURN
MENU
Info (See Page 25)
Zoom (See Page 37)
Bookmark (See Page 36)
Repeat (See Page 28)
EZ View (See Page 29~30)
BASIC
FUNCTIONS
-
the UP/DOWN button to highlight one of the 5
4 Use
functions. Then press the RIGHT or ENTER button
Using the Title Menu
1
Disc Menu
Function
Setup
During the playback of a DVD disc, Press the
MENU button on the remote.
DVD
to access the function.
DVD
Disc Menu
Press ENTER key
for Title Menu
Title Menu
Title Menu using the UP/DOWN buttons,
2 Select
then press the RIGHT or ENTER button.
Function
Setup
ENTER
RETURN
MENU
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
• In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.
26
NOTE
• You can also directly select these functions using thier respective buttons on the remote.
27
Repeat Play
Adjusting the Aspect Ratio (EZ View)
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
To play back using aspect ratio (DVD)
1 Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen
setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should set the
correct aspect ratio in the initial setup (See page 52).
When playing a DVD
DVD
1
Press the REPEAT button on the remote.
Repeat screen appears.
Off
Chapter Title A - B
ENTER
* REPEAT A-B
• Press the REPEAT button.
Select A-B on screen with the LEFT/RIGHT buttons or
press the REPEAT A-B (DVD-E137A/DVD-1010/
DVD-E137B/DVD-E237 only) button on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the CLEAR button or the
REPEAT A-B (DVD-E137A/DVD-1010/DVD-E137B/
DVD-E237 only) button again.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
BASIC
FUNCTIONS
Chapter, Title or A-B using the
2 Select
LEFT/RIGHT buttons.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
VCD/CD
Off
Track Disc A - B
ENTER
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the
screen will disappear. The picture will look vertically stretched.
(Depending on the type of disc, the black bars may not disappear
completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
For 4:3 aspect ratio discs
3 Press ENTER.
to normal play, press REPEAT again,
4 Tothenreturn
press the LEFT/RIGHT buttons to select Off.
Press ENTER, then press the PLAY/PAUSE
button.
NOTE
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture
will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at
the left and right of the screen in order to prevent the picture from
looking horizontally stretched.
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
28
29
Adjusting the Aspect Ratio (EZ View)
If you are using a 4:3 TV
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central
portion of the 16:9 screen.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
1 During play, press the PLAY/PAUSE ( ) button.
and hold the
button to choose the play speed between 1/8X, 1/4X and
2 Press
1/2X of normal. (DVD-E537K only)
Press the
button to choose the play speed between 1/8X, 1/4X and 1/2X of normal.
(DVD-E137A/DVD-1010/DVD-E137B/DVD-E237/DVD-E337K/DVD-E437K only)
the REPEAT or REPEAT A-B (DVD-E137A/DVD-1010/DVD-E137B/
3 Press
DVD-E237 only) button to select the point where the function starts. (A)
(See page 28)
the REPEAT or REPEAT A-B (DVD-E137A/DVD-1010/DVD-E137B/
4 Press
DVD-E237 only) button to select the point where the function ends. (B)
(See page 28)
NOTE
• This function may behave differently depending on the type of disc.
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the CLEAR button or the REPEAT or REPEAT A-B (DVD-E137A/DVD-1010/
DVD-E137B/DVD-E237 only) button again.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
30
31
BASIC
FUNCTIONS
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
When playing a DVD
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
Using the AUDIO button
DVD
1 Press the AUDIO button.
the LEFT/RIGHT buttons to select the
2 Use
desired language on a DVD.
On
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
ENG
Off
VCD/CD
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
ADVANCED
FUNCTIONS
3
ENG
the UP/DOWN buttons to determine
3 Use
whether or not the subtitle will be displayed.
- The audio languages are represented by abbreviations.
Use the LEFT/RIGHT buttons to select Stereo,
LEFT or RIGHT. (On VCD/CD)
1 Press the SUBTITLE button.
the LEFT/RIGHT buttons to select the
2 Use
desired subtitle language.
NOTE
• A DVD disc can contain up to 8 audio languages.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 48.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 48.
32
33
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the ANGLE button
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand
corner of the screen.
1
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
turn off the display, press the ANGLE
3 Tobutton
again.
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
you press the I.REPLAY button, the current
1 Ifscene
moves backward about 10 seconds,
and plays back.
- Depending on the disc, the Instant Replay
function may not work.
ADVANCED
FUNCTIONS
the LEFT/RIGHT buttons to select the
2 Use
desired screen angle.
Using the Instant Replay/Skip Function
Using the Instant Skip function (DVD)
Use this function to skip playback 10 seconds
ahead of the current scene.
1 Press the I.SKIP button.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this feature may not work.
34
35
Using the Bookmark Function
Using the Zoom & 3D Sound Functions
This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can
quickly find them at a later time.
Using the Zoom Function (DVD)
play or pause mode, press the ZOOM button
1 During
on the remote.
Using the Bookmark Function (DVD/VCD)
A zoom mark will be displayed on screen.
1
the LEFT/RIGHT buttons to move to the
2 Use
desired bookmark icon.
you reach the scene you want to mark,
3 When
press the ENTER button. The icon will change to
During play, press the BOOKMARK button on the
remote. The Bookmark icons will be displayed.
ENTER
the UP/DOWN or LEFT/RIGHT buttons to select
2 Use
the part of the screen you want to zoom in on.
3 Press the ENTER button.
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
- During VCD play, press ENTER to zoom in 2X/Normal in order.
a number (1, 2, or 3).
Using the 3D Sound Function
Recalling a Marked Scene
1
During play, press the BOOKMARK button
on the remote.
1 – –
CLEAR
the LEFT/RIGHT buttons to select a
2 Use
marked scene.
the PLAY/PAUSE (
3 Press
to the marked scene.
ADVANCED
FUNCTIONS
the BOOKMARK button to turn off the
4 Press
display.
) buttons to skip
Clearing a Bookmark
play, press the BOOKMARK button
1 During
on the remote.
the LEFT/RIGHT buttons to select the
2 Use
bookmark number you want to delete.
the CLEAR button to delete a
3 Press
bookmark number. Press the BOOKMARK
NOTE
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work.)
play, press the 3D button.
1 During
The 3D SOUND mark will be displayed on
screen.
• Up to three scenes may be marked
at a time.
• When in VCD 2.0 mode (MENU ON
mode), this function does not work.
• Depending on the disc, the
Bookmark function may not work.
the UP/DOWN buttons to turn the
2 Press
3D Sound feature On or Off.
Off
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
button to turn off the display.
36
37
MP3/WMA Play
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
• If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
• To change the currently playing media, press the STOP ( )
button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
ENTER
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
MP3/WMA Play Function
the first song file is playing, the music
1 When
folder menu will appear on the right side of the
ENTER
RETURN
MENU
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
Use the UP/DOWN buttons to select the
desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
Program/Random playback
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
Press the MODE button to switch between the
PROGRAM and RANDOM modes. See page 40
for more information on these modes.
PROGRAM
RANDOM
NOTE
ADVANCED
FUNCTIONS
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
2
CD-R MP3/WMA discs
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
• Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
38
39
Program Play & Random Play
Picture CD Playback
1 Open the disc tray.
2 Load the disc on the tray.
3 Close the tray.
Program Play (CD/MP3/WMA)
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
PROGRAM. Press the ENTER button.
- Load the disc with the labeled side up.
PROGRAM
RANDOM
- The tray closes and you should get a screen that looks like the
one to the right.
the UP/DOWN/LEFT/RIGHT buttons to
3 Use
select the first track to add to the program.
• Select JPEG in the menu to view a Photo CD.
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
button. (Press the PLAY/PAUSE (
) button if you want to play it
in the Slide Show mode.)
Press the ENTER button. The selection
numbers appear in the Program Order box.
ENTER
ALBUM
PHOTO: 1 /215
PROGRAM 01
4
Press the PLAY/PAUSE (
) button.
The disc will be played in programmed order.
Program Order
Track
01
05
09
13
02
06
10
14
03
07
11
15
------
04
08
12
16
RETURN
------
------
• To see the previous 6 pictures, press the
•
button.
button.
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to display the menu again.
ENTER
PHOTO: 1 /215
PHOTO: 1 /215
CLEAR
Random Play (CD/MP3/WMA)
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
RANDOM. Press the ENTER button.
• To see the next 6 pictures, press the
ADVANCED
FUNCTIONS
ENTER
------
ENTER RETURN
•
: Each time the ENTER button is pressed, the picture rotates
90 degrees clockwise.
•
: Each time the ENTER button is pressed, the picture is
enlarged up to 2X. (Normal ➝ 2X ➝ Normal)
PHOTO: 1 /215
•
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
PROGRAM
RANDOM
•
: When this icon is selected and ENTER is pressed, the pictures
change automatically with about an 6 second interval.
•
: The pictures change automatically with about an 12 second
interval.
The disc will be played in random order.
TIMER:
ENTER RETURN
•
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
40
• To change the currently playing media, press the STOP ( ) button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected item
will be played.
NOTE
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
41
Beginning Karaoke Functions
Picture CD Playback
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
(DVD-E337K/DVD-E437K/DVD-E537K only)
Operation Sequence
the Mixed Audio Out terminals with
1 Connect
the TV or AMP.
2 Connect Mic into Mic 1 or Mic 2 jack.
- When the MIC should be connected, karaoke function
can operate.
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
Key Control
1 Press the KARAOKE button.
the "Keycon" using the LEFT/RIGHT
2 Select
buttons.
KARAOKE
FUNCTIONS
of the LEFT/RIGHT buttons, change
3 Byto theusedesired
tone.
: To let 7 scales down by half scale.
: Original scale.
: To let 7 scales up by half scale.
NOTE
• If you hear strange noises(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers. Turning down the microphone volume or the speaker volume is also effective.
• The next music plays if performing SEARCH with SCORE displayed in the Score On MODE for CD or
VCD.
• When playing MP3 disc, MIC & Karaoke functions are not operate.
• When playing LPCM disc, karaoke functions are not operate.
• When the MIC is connected, Digital Out does not work.
42
43
Reserving a Song
Vocal Function
(DVD-E337K/DVD-E437K/DVD-E537K only)
(DVD-E337K/DVD-E437K/DVD-E537K only)
It is the function to reserve the desired song in advance by use of Karaoke function.
Sequence of reservation
the Karaoke Disc containing the
1 Playback
wanted songs.
2 Press the KARAOKE button.
the "Request" using the LEFT/RIGHT
3 Select
buttons.
the number (Track No.) of the desired
4 Input
song into the flickering part(--).
- You can reserve up to 10 songs.
5
the KARAOKE button twice displays the
1 Pressing
following:
Vocal Fader
– The function to make the music only sound by cancelling
vocal when playing a Karaoke disc.
VOCAL FADER
↓
Remark
V1
CH1. Vocal Cancel
↓
V2
CH2. Vocal Cancel
↓
1+2
CH1, CH2. Vocal Cancel
↓
OFF
Vocal Fader Off
– In VCD, CVD or CD, you can select only the On or Off.
When you want the next reserved song
during playing a song, press the SKIP
button.
Cancellation of reservation
Cancel by pressing the CLEAR button of the
remote.
- The last reserved song will be erased first.
pressing of the CLEAR button
2 Continuous
can cancel the next reserved song.
the reservation is required again, input the
3 Ifsong
number in the flickering part.
Guide Melody
– To guide melody through xylophone and piano help you sing
easily.
– This function works only on the DVD Karaoke disc on which
the guide melody is recorded.
Score Function
KARAOKE
FUNCTIONS
1
Sequence of reservation
Press KARAOKE button twice to turn the Score Mode On.
- Score will pop up whenever a song is completed.
CAUTIONS
- Make sure to disconnect MIC to play a movie disc or play in a general mode. If you play a movie disc
with the Score On, a score will show up every time when a chapter is over.
Types of Karaoke disc
• DVD Karaoke Disc
NOTE
• When using "SKIP" button, it can not work at the last song.
• When using Request function, the "DISPLAY" and “REPEAT” function does not work.
44
• CVD, VCD Karaoke Disc
Channel
Karaoke
-Channel
5CH. DVD
2CH. DVD
Channel
Karaoke
-Channel
1 CH
L
Left stereo music
Left stereo music + Vocal
1 CH
CH1 LEFT
1 CH
CH1 RIGHT Right stereo music + Vocal
CVD
Left stereo music + Vocal
2 CH
R
Right stereo music Right stereo music + Vocal
3 CH
M
Guide melody
-
4 CH
V1
Vocal track
-
2 CH
CH2 LEFT
5 CH
V2
Vocal track
-
2 CH
CH2 RIGHT Right stereo music
VCD, CD
Left stereo music
Right stereo music
+ Vocal
Left stereo music
-
45
Using the Setup Menu
Setting Up the Language Features
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop mode, press the MENU button
on the remote. Select Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
DVD
Disc Menu
Title Menu
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable movies
such as those with violence, adult subject
matter, etc.
the UP/DOWN buttons on the remote to access
2 Use
the different features.
3 Press the ENTER button to access the sub features.
NOTE
Setup
LANGUAGE SETUP
PLAYER MENU LANGUAGE
Player Menu
English
Français
Deutsch
Español
Italiano
Nederlands
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
Using the Disc Menu Language
This function changes the text language only on the disc
menu screens.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Disc Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
e.g) Setting up in English.
DISC MENU LANGUAGE
Disc Menu
CHANGING
SETUP MENU
To make the setup screen disappear after setting up, press the
MENU button again.
Function
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Player Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
e.g) Setting up in English.
Others
- Select “Others” if the language you want is not listed.
Depending on the disc, some Setup Menu selections may not work.
- English is selected and the screen returns to SETUP menu.
46
47
Setting Up the Language Features
Setting Up the Audio Options
Using the Audio Language
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
AUDIO LANGUAGE
Audio Setup using UP/DOWN buttons, then
3 Select
press the RIGHT or ENTER button.
Audio
Original
Others
4
5 Press the UP/DOWN buttons to select ‘English’ .
Select Audio using UP/DOWN buttons, then press
the RIGHT or ENTER button.
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
NOTE
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
6 Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
Automatic
MPEG-2 Digital Out
: PCM
DTS
: Off
Dynamic Compression
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
: On
: Digital
MPEG-2 Digital Out
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
SUBTITLE LANGUAGE
: PCM
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
Subtitle
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
PCM Down Sampling
Others
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
CHANGING
SETUP MENU
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
• Be sure to select the correct Digital Output
or no audio will be heard.
• When Multi Channel Output select Digital.
Dolby&MPEG-2 Digital Out works.
DTS
Using the Subtitle Language
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
Select Subtitle using UP/DOWN buttons, then press
4 the
RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
AUDIO SETUP
Dolby Digital Out
- Select “Others” if the language you want is not listed.
48
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
Dolby Digital Out
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
6
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Multi Channel Output (DVD-E537K only)
1. Digital : Select this when using the multichannel digital audio output.
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• How to make the SETUP menu
disappear or return to menu screen
during set up; Press RETURN or
LEFT button.
2. Analog : Select this when using the multichannel analog audio output.
Speaker Setup (DVD-E537K only)
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
49
Surround Sound Speaker Setup (DVD-E537K only)
1 With the unit in Stop mode, press the MENU button.
Select Setup using UP/DOWN buttons,
2 then
RIGHT or ENTER button.
Select Audio Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
Multi Channel Output using UP/DOWN
4 Select
buttons. Then select Analog pressing the RIGHT
or ENTER button.
Use the UP/DOWN buttons to select Speaker Setup.
Then press the RIGHT or ENTER button.
5
the UP/DOWN or LEFT/RIGHT buttons to select
6 Use
the desired item. Then press the ENTER button.
Setting up TEST
The test output signals come clockwise starting from the Front
Speaker(L). Adjust Channel Balance to match to the volume of test
signals memorized in the system.
FRONT(L)
CENTER
SURROUND(R)
50
SUBWOOFER
SURROUND(L)
FRONT(R)
: PCM
MPEG-2 Digital Out
: PCM
DTS
: Off
Dynamic Compression
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
: On
: Analog
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Display Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
DISPLAY SETUP
TV Aspect
: 4:3 L - Box
TV Aspect
Still Mode
: Auto
Screen Massages : On
Still Mode
Front Display
: Auto Dim
Black Level
: Off
NTSC Disc Output : PAL 60 Hz
Screen Messages
AUDIO SETUP
Dolby Digital Out
: PCM
MPEG-2 Digital Out
: PCM
DTS
Dynamic Compression
: Off
: On
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
: Analog
Front Display
TV ASPECT
4:3 Letter Box
Black Level
NTSC Disc Output
4:3 Pan Scan
16:9 Wide
CHANGING
SETUP MENU
The default settings : FRONT L , R(Large), CENTER(None),
SURROUND (None)
Select the size of the speakers to be connected.
• Front(FL , FR)
- Large: Normally select this.
- Small: When the sound cracks or the surround sound effects are
difficult to hear, select this. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the
speaker from the subwoofer.
• Center
- None: If you do not connect a center speaker, select this.
- Large: Normally select this.
- Small: When the sound cracks, select this. This activates the
Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the center speaker from other speakers.
• Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Normally select either of these according to
the rear speaker’s position.
- Small (Rear/Side): When the sound cracks or the surround
sound effects are difficult to hear, select either of these according
to the rear speaker’s position. This activates the Dolby Digital
bass redirection circuitry and outputs the bass frequencies of the
rear speaker from other speakers.
AUDIO SETUP
Dolby Digital Out
Setting Up the Display Options
NOTE
• How to make the SETUP menu
disappear or return to menu screen
during set up.
Press RETURN or LEFT button.
• The subwoofer test output signal is
lower than the other speakers.
• The MPEG Multichannel logo is a
trademark registered by PHILIPS
Corporation.
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
51
Setting Up the Parental Control
Setting Up the Display Options
TV Aspect
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of
the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display small text
clearer.
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
Screen Messages
Use to turn on-screen messages On or Off.
Black Level
Adjusts the brightness of the screen.(On/Off)
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Parental Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
RIGHT or ENTER to select Yes if you want to
4 Use
use a password. The Enter Password screen
PARENTAL SETUP
Use Password
: No
appears.
your password. The Re-enter Password
5 Enter
screen appears to confirm the password.
ENTER
Enter your password again.
The Parental Control screen appears.
About the Rating Level ;
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
Level. Press ENTER.
RETURN
MENU
CREATE PASSWORD
Enter Password
- - - -
0~9
- Use UP/DOWN to select the level (e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
Use Password.
RETURN
PARENTAL SETUP
About the Change Password ;
CHANGING
SETUP MENU
Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
e.g) Setting up in LEVEL6.
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance.
If this is not the case, you can choose to leave “ PAL 60Hz” as is.
52
RATING LEVEL
NOTE
• How to make the SETUP menu disappear or return to
menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
53
Controlling a TV with the Remote (DVD-E537K only)
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
BRAND
SAMSUNG_4
SAMSUNG_6, LG, LOEWE, PHILIPS,
FINLUX, YOKO, LOEWE OPTA,
MITSUBISHI, PHONOLA, RADIOLA,
SCHNEIDER
SAMSUNG_1
SAMSUNG_2
SAMSUNG_3
SAMSUNG_5
TOSHIBA
PANASONIC_4
GRUNDIG, BLAUPUNKT, SIEMENS
SHARP
HITACHI
SANYO, AKAI, FISHER
HITACHI, SABA, THOMSON, NORDMENDE
HITACHI, NORDMENDE, SABA,
TELEFUNKEN, THOMSON, BRANDT,
FERGUSON, PIONEER, TELEAVA
SONY
TOSHIBA, SANYO, SHARP, SONY,
MITSUBISHI
TOSHIBA, GRUNDIG, FINLUX
TOSHIBA
1
2 Point the DVD’s remote at the TV.
holding the TV POWER button
3 While
down, enter the code for your brand.
Turn on the TV.
While holding down the TV POWER button,
enter 0 and then 1.
54
23
24
25
26
27
28
29
30
31
32
33
34
4
BRAND
TOSHIBA
PHILIPS, PHONOLA, RADIOLA
TOSHIBA, GRUNDIG, CGE,
IMPERIAL, MIVAR
PHILIPS, SABA, BANG&OLUFSEN,
BRIONVEGA, FINLUX,
FORMENTI, LOEWE OPTA, METZ,
WEGA, PHONOLA, RADIOMARELLI,
SINGER, SINUDYNE
NOKIA, PANASONIC, SABA, PIONEER,
REZ, SELECO, SALORA
HITACHI, NORDMENDE, PANASONIC,
SABA,TELEFUNKEN, THOMSON,
CONTINENTAL, EDISON
PANASONIC_2
PANASONIC_3
PANASONIC_6
TELEFUNKEN
MIVAL
LG_2
SHARP_2
JVC
THOMSON ASIA
THOMSON ASIA
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
P4
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
P7
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P20
The
icon appears on
screen.
P23
• Check if the disc has a Menu.
P46~47
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P46~54
The screen ratio cannot
be changed.
• The Screen Ratio is fixed on your DVDs.
P51~52
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P49~50
Forgot password
• Press power on from a cold start with no disc in the unit. Press the
STOP ( ) and PLAY (
) buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
P53
To operate the TV, use the “TV Function
Buttons” described on page 19.
The remote may not be able to control every
model TV of the brands listed.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
P49~50
Disc Menu doesn’t appear.
If the TV turns off, setup is complete.
NOTE
Page
No operations can be
performed with remote.
Enter other codes of the same brand
if the first code does not work.
5
Action
If you experience other
problems.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
REFERENCE
e.g) For SAMSUNG 4 TVs
CODE
19
20
21
22
Before requesting service (troubleshooting), please check the following.
Problem
TV Codes
CODE
01
02
Troubleshooting
55
Specifications
General
Power Requirements
AC 110~240V, 50/60 Hz
Power Consumption
12 W
Weight
2.4 Kg
Dimensions
430mm (W) X 240mm (D) X 60mm (H)
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
DVD
Disc
MEMO
(DIGITAL VERSATILE DISC)
Reading Speed : 3.49 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
Video
Output
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
S-VIDEO
2 channel
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
Audio
Output
96 kHz Sampling : 4 Hz to 44 kHz
110 dB (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237)
*S/N Ratio
105 dB (Karaoke off Mode DVD-E337K/DVD-E437K/DVD-E537K)
100 dB (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237)
*Dynamic Range
96 dB (Karaoke off Mode DVD-E337K/DVD-E437K/DVD-E537K)
0.004 % (DVD-E137A/DVD-1010/DVD-E137B/DVD-E237)
*Total Harmonic Distortion
0.004 % (Karaoke off Mode DVD-E337K/DVD-E437K/DVD-E537K)
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
56