Overload Relays 3RB2 Solid-State Overload Relays ■

Overload Relays 3RB2 Solid-State Overload Relays ■
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
■ Overview
1
2
3
5
6
2
4
5
7
(1) Connection for mounting onto contactors:
Optimally adapted in electrical, mechanical and design terms to the
contactors and soft starters, these connecting pins can be used for direct mounting of the overload relays. Stand-alone installation is possible as an alternative (in some cases in conjunction with a stand-alone
installation module).
(2) Selector switch for manual/automatic RESET and RESET button:
With the slide switch you can choose between manual and automatic
RESET. A device set to manual RESET can be reset locally by pressing
the RESET button. On the 3RB21 a solid-state remote RESET is
integrated.
(3) Switch position indicator and TEST function of the wiring:
Indicates a trip and enables the wiring test.
(4) Solid-state test (device test):
Enables a test of all important device components and functions.
(5) Motor current setting:
Setting the device to the rated motor current is easy with the large rotary knob.
(6) Trip class setting/internal ground-fault detection (only 3RB21):
Using the rotary switch you can set the required trip class and activate
the internal ground-fault detection dependent on the start-up
conditions.
(7) Connecting terminals (removable joint block for auxiliary circuits):
The generously sized terminals permit connection of two conductors
with different cross-sections for the main and auxiliary circuits. The
auxiliary circuit can be connected with screw terminals and alternatively with spring-loaded terminals.
The 3RB20 and 3RB21 solid-state overload relays up to 630 A
with internal power supply have been designed for inverse-time
delayed protection of loads with normal and heavy starting (see
Technical Information LV 1 T, "Function") against excessive temperature rises due to overload, phase unbalance or phase failure. An overload, phase unbalance or phase failure result in an
increase of the motor current beyond the set rated motor current.
This current rise is detected by the current transformers integrated into the devices and evaluated by corresponding solidstate circuits which then output a pulse to the auxiliary contacts.
The auxiliary contacts then switch off the load by means of a
contactor. The break time depends on the ratio between the tripping current and current setting Ie and is stored in the form of a
long-term stable tripping characteristic (see Technical Information LV 1 T, "Characteristic Curves").
In addition to inverse-time delayed protection of loads against
excessive temperature rises due to overload, phase unbalance
and phase failure, the 3RB21 solid-state overload relays also allow internal ground-fault detection (not possible in conjunction
with contactor assemblies for wye-delta starting). This provides
protection of loads against high-resistance short-circuits due to
damage to the insulation material, moisture, condensed water
etc.
The "tripped" status is signaled by means of a switch position indicator. Resetting takes place either manually or automatically
after the recovery time has elapsed (see Technical Information
LV 1 T, "Function").
The devices are manufactured in accordance with environmental guidelines and contain environmentally friendly and reusable
materials. They comply with all important worldwide standards
and approvals.
"Increased safety" type of protection EEx e according to
ATEX directive 94/9/EC
The 3RB20/3RB21 solid-state overload relays are suitable for the
overload protection of explosion-proof motors with "increased
safety" type of protection EEx e. The relays meet the requirements of EN 60079-7 (Electrical apparatus for areas subject to
explosion hazards – Increased safety "e");
See Chapter 20 "Appendix" --> "Standards and approvals" -->
"Type overview of approved devices for potentially explosive areas (ATEX explosion protection)".
EC type test certificate for Group II, Category (2) G/D exists. It
has the number PTB 06 ATEX 3001.
■ Benefits
The most important features and benefits of the 3RB20/3RB21
solid-state overload relays are listed in the overview table
(see "Overload Relays" --> "General data"), page 5/39).
5/48
Siemens LV 1 · 2009
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
■ Application
■ Accessories
Industries
The 3RB20/3RB21 solid-state overload relays are suitable for
customers from all industries who want to guarantee optimum inverse-time delayed protection of their electrical loads (e. g. motors) under normal and heavy starting conditions (CLASS 5 to
CLASS 30), minimize project completion times, inventories and
power consumption, and optimize plant availability and maintenance management.
Application
The 3RB20/3RB21 solid-state overload relays have been designed for the protection of induction motors in sinusoidal
50/60 Hz voltage networks. The relays are not suitable for the
protection of single-phase AC or DC loads.
The following accessories are available for the 3RB20/3RB21
solid-state overload relays:
• One terminal bracket each for the overload relays size S00
and S0 (sizes S2 to S12 can be installed as stand-alone installation without a terminal bracket)
• One mechanical remote RESET module for all sizes
• One cable release for resetting devices which are difficult to
access (for all sizes)
• One sealable cover for all sizes
• Box terminal blocks for sizes S6 and S10/S12
• Terminal covers for sizes S2 to S10/S12
The 3RU11 thermal overload relay or the 3RB22/3RB23 solidstate overload relay can be used for single-phase AC loads. For
DC loads we recommend the 3RU11 thermal overload relay.
Ambient conditions
The devices are insensitive to external influences such as
shocks, corrosive environments, ageing and temperature
fluctuation.
5
For the temperature range from –25 °C to +60 °C, the
3RB20/3RB21 solid-state overload relays compensate the temperature according to IEC 60947-4-1.
For the 3RB20/3RB21 solid-state overload relays with the sizes
S6, S10 and S12, the upper set value of the setting range must
be reduced for ambient temperatures > 50 °C by a certain factor
(see tables below).
Type
Setting range
Derating factor for the upper set
value for stand-alone installation
at ambient temperature
+50 °C
+60 °C
3RB20 56, 3RB21 56
50 ... 200 A
100 %
100 %
3RB20 66, 3RB21 66
55 ... 250 A
100 %
100 %
3RB20 66, 3RB21 66
160 ... 630 A
100 %
90 %
Type
Setting range
Derating factor for the upper set
value for mounting onto
contactor
at ambient temperature
+50 °C
+60 °C
3RB20 56, 3RB21 56
50 ... 200 A
100 %
70 %
3RB20 66, 3RB21 66
55 ... 250 A
100 %
70 %
3RB20 66, 3RB21 66
160 ... 630 A
100 %
70 %
Siemens LV 1 · 2009
5/49
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
■ Selection and ordering data
3RB20 solid-state overload relays with screw terminals on auxiliary current side for direct mounting1)2) and stand-alone
installation2)3), CLASS 10
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• Internal power supply
• Auxiliary contacts 1 NO + 1 NC
Size
Rating
contactor4) for induction
motor
Rated value5)
kW
• Manual and automatic RESET
• Switch position indicators
• TEST function and self-monitoring
Current setting
of the inversetime delayed
overload release
Short-circuit DT Screw terminals
(on auxiliary
protection
current side)
with fuse,
type of coorOrder No.
dination 2,
gL/gG operational class6)
A
A
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
Size S001)
S00
0.04 … 0.09
0.1 … 0.4
1
}
3RB20 16-1RB0
1
1 unit
101
0.200
0.12 … 0.37
0.32 … 1.25
2
}
3RB20 16-1NB0
1
1 unit
101
0.200
0.55 … 1.5
1…4
10
}
3RB20 16-1PB0
1
1 unit
101
0.200
1.1 … 5.5
3 … 12
20
}
3RB20 16-1SB0
1
1 unit
101
0.200
3RB20 16-1RB0
Size S01)
5
S0
0.04 … 0.09
0.1 … 0.4
1
}
3RB20 26-1RB0
1
1 unit
101
0.220
0.12 … 0.37
0.32 … 1.25
2
}
3RB20 26-1NB0
1
1 unit
101
0.220
0.55 … 1.5
1…4
10
}
3RB20 26-1PB0
1
1 unit
101
0.220
1.1 … 5.5
3 … 12
20
}
3RB20 26-1SB0
1
1 unit
101
0.220
3 … 11
6 … 25
35
}
3RB20 26-1QB0
1
1 unit
101
0.220
3 … 11
6 … 25
63
}
3RB20 36-1QB0
1
1 unit
101
0.360
}
3RB20 36-1QW1
1
1 unit
101
0.230
}
3RB20 36-1UB0
1
1 unit
101
0.360
}
3RB20 36-1UW1
1
1 unit
101
0.230
3RB20 26-1QB0
Size S21)3)7)
S2
7.5 … 22
12.5 … 50
80
3RB20 36-1UB0
Size S31)3)7)
S3
7.5 … 22
12.5 … 50
160
}
3RB20 46-1UB0
1
1 unit
101
0.560
11 … 45
25 … 100
315
}
3RB20 46-1EB0
1
1 unit
101
0.560
}
3RB20 46-1EW1
1
1 unit
101
0.450
}
3RB20 56-1FC2
1
1 unit
101
1.030
}
3RB20 56-1FW2
1
1 unit
101
0.690
3RB20 46-1EB0
Size S62)7)
S6 with
busbar
connection
3RB20 56-1FW2
22 … 90
50 … 200
315
S6 with
box terminals
Size S10/S122)
S10/S12
and size
14
(3TF68/
3TF69)
22 … 110
55 … 250
400
}
3RB20 66-1GC2
1
1 unit
101
1.820
90 … 450
160 … 630
800
}
3RB20 66-1MC2
1
1 unit
101
1.820
3RB20 66-1MC2
1)
The relays with an Order No. ending with "0" are designed for direct
mounting. With the matching terminal brackets (see "Accessories",
page 5/60) the sizes S00 and S0 can also be installed as stand-alone
units.
2)
The relays with an Order No. ending with "2" are designed for direct
mounting and stand-alone installation. For 3TF68/3TF69 contactors, direct
mounting is not possible.
3)
The relays with an Order No. ending with "1" are designed for stand-alone
installation.
4)
Observe maximum rated operational current of the devices.
5)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
6)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors see Technical Information
LV 1 T "Technical specifications"--> "Short-circuit protection with fuses for
motor feeders".
7)
The relays with an Order No. with "W" in penultimate position are
equipped with a straight-through transformer.
* You can order this quantity or a multiple thereof.
5/50
Siemens LV 1 · 2009
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
3RB20 solid-state overload relays with spring-loaded terminals on auxiliary current side for direct mounting1)2) and
stand-alone installation2)3), CLASS 10
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• Internal power supply
• Auxiliary contacts 1 NO + 1 NC
Size
Rating
contactor4) for induction
motor
Rated value5)
kW
Current setting
of the inversetime delayed
overload release
A
• Manual and automatic RESET
• Switch position indicators
• TEST function and self-monitoring
Short-circuit DT Spring-type
protection
terminals
(on auxiliary
with fuse,
current side)
type of coordination 2,
Order No.
gL/gG operational class6)
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
A
Size S001)
S00
0.04 … 0.09
0.1 … 0.4
1
A
3RB20 16-1RD0
1
1 unit
101
0.200
0.12 … 0.37
0.32 … 1.25
2
A
3RB20 16-1ND0
1
1 unit
101
0.200
0.55 … 1.5
1…4
10
A
3RB20 16-1PD0
1
1 unit
101
0.200
1.1 … 5.5
3 … 12
20
A
3RB20 16-1SD0
1
1 unit
101
0.200
3RB20 16-1RD0
S0
0.04 ... 0.09
0.1 ... 0.4
1
A
3RB20 26-1RD0
1
1 unit
101
0.220
0.12 ... 0.37
0.32 ... 1.25
2
A
3RB20 26-1ND0
1
1 unit
101
0.220
0.55 ... 1.5
1 ... 4
10
A
3RB20 26-1PD0
1
1 unit
101
0.220
1.1 … 5.5
3 … 12
20
A
3RB20 26-1SD0
1
1 unit
101
0.220
3 … 11
6 … 25
35
A
3RB20 26-1QD0
1
1 unit
101
0.220
3 … 11
6 … 25
63
A
3RB20 36-1QD0
1
1 unit
101
0.360
A
3RB20 36-1QX1
1
1 unit
101
0.230
A
3RB20 36-1UD0
1
1 unit
101
0.360
A
3RB20 36-1UX1
1
1 unit
101
0.230
3RB20 26-1QD0
Size S21)3)7)
S2
7.5 … 22
12.5 … 50
80
3RB20 36-1UD0
Size S31)3)7)
S3
7.5 … 22
12.5 … 50
160
A
3RB20 46-1UD0
1
1 unit
101
0.560
11 … 45
25 … 100
315
A
3RB20 46-1ED0
1
1 unit
101
0.560
A
3RB20 46-1EX1
1
1 unit
101
0.450
A
3RB20 56-1FF2
1
1 unit
101
1.030
A
3RB20 56-1FX2
1
1 unit
101
0.690
3RB20 46-1ED0
Size S62)7)
S6 with
busbar
connection
3RB20 56-1FX2
22 … 90
50 … 200
315
S6 with
box terminals
Size S10/S122)
S10/S12
and size
14
(3TF68/
3TF69)
22 … 110
55 … 250
400
A
3RB20 66-1GF2
1
1 unit
101
1.820
90 … 450
160 … 630
800
A
3RB20 66-1MF2
1
1 unit
101
1.820
3RB20 66-1MF2
1)
The relays with an Order No. ending with "0" are designed for direct
mounting. With the matching terminal brackets (see "Accessories",
page 5/60) the sizes S00 and S0 can also be installed as stand-alone
units.
2)
The relays with an Order No. ending with "2" are designed for direct
mounting and stand-alone installation. For 3TF68/3TF69 contactors, direct
mounting is not possible.
3)
The relays with an Order No. ending with "1" are designed for stand-alone
installation.
4)
Observe maximum rated operational current of the devices.
5)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
6)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors see Technical Information
LV 1 T "Technical specifications" --> "Short-circuit protection with fuses for
motor feeders".
7)
The relays with an Order No. with "X" in penultimate position are equipped
with a straight-through transformer.
* You can order this quantity or a multiple thereof.
Siemens LV 1 · 2009
5/51
5
Size S01)
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
3RB20 solid-state overload relays with screw terminals on auxiliary current side for direct mounting1)2) and stand-alone
installation2)3), CLASS 20
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• Internal power supply
• Auxiliary contacts 1 NO + 1 NC
Size
Rating
contactor4) for induction
motor
Rated value5)
kW
• Manual and automatic RESET
• Switch position indicators
• TEST function and self-monitoring
Current setting
of the inversetime delayed
overload release
Short-circuit DT Screw terminals
(on auxiliary
protection
current side)
with fuse,
type of coorOrder No.
dination 2,
gL/gG operational class6)
A
A
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
Size S001)
S00
0.04 … 0.09
0.1 … 0.4
1
}
3RB20 16-2RB0
1
1 unit
101
0.200
0.12 … 0.37
0.32 … 1.25
2
}
3RB20 16-2NB0
1
1 unit
101
0.200
0.55 … 1.5
1…4
10
}
3RB20 16-2PB0
1
1 unit
101
0.200
1.1 … 5.5
3 … 12
20
}
3RB20 16-2SB0
1
1 unit
101
0.200
3RB20 16-2RB0
Size S01)
5
S0
0.04 ... 0.09
0.1 ... 0.4
1
}
3RB20 26-2RB0
1
1 unit
101
0.220
0.12 ... 0.37
0.32 ... 1.25
2
}
3RB20 26-2NB0
1
1 unit
101
0.220
0.55 ... 1.5
1 ... 4
10
}
3RB20 26-2PB0
1
1 unit
101
0.220
1.1 … 5.5
3 … 12
20
}
3RB20 26-2SB0
1
1 unit
101
0.220
3 … 11
6 … 25
35
}
3RB20 26-2QB0
1
1 unit
101
0.220
3 … 11
6 … 25
63
}
3RB20 36-2QB0
1
1 unit
101
0.360
}
3RB20 36-2QW1
1
1 unit
101
0.230
}
3RB20 36-2UB0
1
1 unit
101
0.360
}
3RB20 36-2UW1
1
1 unit
101
0.230
3RB20 26-2QB0
Size S21)3)7)
S2
7.5 … 22
12.5 … 50
80
3RB20 36-2UB0
Size S31)3)7)
S3
7.5 … 22
12.5 … 50
160
}
3RB20 46-2UB0
1
1 unit
101
0.560
11 … 45
25 … 100
315
}
3RB20 46-2EB0
1
1 unit
101
0.560
}
3RB20 46-2EW1
1
1 unit
101
0.450
}
3RB20 56-2FC2
1
1 unit
101
1.030
}
3RB20 56-2FW2
1
1 unit
101
0.690
3RB20 46-2EB0
Size S62)7)
S6 with
busbar
connection
3RB20 56-2FW2
22 … 90
50 … 200
315
S6 with
box terminals
Size S10/S122)
S10/S12
and size
14
(3TF68/
3TF69)
22 … 110
55 … 250
400
}
3RB20 66-2GC2
1
1 unit
101
1.820
90 … 450
160 … 630
800
}
3RB20 66-2MC2
1
1 unit
101
1.820
3RB20 66-2MC2
1)
The relays with an Order No. ending with "0" are designed for direct
mounting. With the matching terminal brackets (see "Accessories",
page 5/60) the sizes S00 and S0 can also be installed as stand-alone
units.
2)
The relays with an Order No. ending with "2" are designed for direct
mounting and stand-alone installation. For 3TF68/3TF69 contactors, direct
mounting is not possible.
3)
The relays with an Order No. ending with "1" are designed for stand-alone
installation.
4)
Observe maximum rated operational current of the devices.
5)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
6)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors see Technical Information
LV 1 T "Technical specifications" --> "Short-circuit protection with fuses for
motor feeders".
7)
The relays with an Order No. with "W" in penultimate position are
equipped with a straight-through transformer.
* You can order this quantity or a multiple thereof.
5/52
Siemens LV 1 · 2009
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
3RB20 solid-state overload relays with spring-loaded terminals on auxiliary current side for direct mounting1)2) and
stand-alone installation2)3), CLASS 20
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• Internal power supply
• Auxiliary contacts 1 NO + 1 NC
Size
Rating
contactor4) for induction
motor
Rated value5)
kW
Current setting
of the inversetime delayed
overload release
A
• Manual and automatic RESET
• Switch position indicators
• TEST function and self-monitoring
Short-circuit DT Spring-type
protection
terminals
(on auxiliary
with fuse,
current side)
type of coordination 2,
Order No.
gL/gG operational class6)
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
A
Size S001)
S00
0.04 … 0.09
0.1 … 0.4
1
A
3RB20 16-2RD0
1
1 unit
101
0.200
0.12 … 0.37
0.32 … 1.25
2
A
3RB20 16-2ND0
1
1 unit
101
0.200
0.55 … 1.5
1…4
10
A
3RB20 16-2PD0
1
1 unit
101
0.200
1.1 … 5.5
3 … 12
20
A
3RB20 16-2SD0
1
1 unit
101
0.200
3RB20 16-2RD0
S0
0.04 ... 0.09
0.1 ... 0.4
1
A
3RB20 26-2RD0
1
1 unit
101
0.220
0.12 ... 0.37
0.32 ... 1.25
2
A
3RB20 26-2ND0
1
1 unit
101
0.220
0.55 ... 1.5
1 ... 4
10
A
3RB20 26-2PD0
1
1 unit
101
0.220
1.1 … 5.5
3 … 12
20
A
3RB20 26-2SD0
1
1 unit
101
0.220
3 … 11
6 … 25
35
A
3RB20 26-2QD0
1
1 unit
101
0.220
3 … 11
6 … 25
63
A
3RB20 36-2QD0
1
1 unit
101
0.360
A
3RB20 36-2QX1
1
1 unit
101
0.230
A
3RB20 36-2UD0
1
1 unit
101
0.360
A
3RB20 36-2UX1
1
1 unit
101
0.230
3RB20 26-2QD0
Size S21)3)7)
S2
7.5 … 22
12.5 … 50
80
3RB20 36-2UD0
Size S31)3)7)
S3
7.5 … 22
12.5 … 50
160
A
3RB20 46-2UD0
1
1 unit
101
0.560
11 … 45
25 … 100
315
A
3RB20 46-2ED0
1
1 unit
101
0.560
A
3RB20 46-2EX1
1
1 unit
101
0.450
A
3RB20 56-2FF2
1
1 unit
101
1.030
A
3RB20 56-2FX2
1
1 unit
101
0.690
3RB20 46-2ED0
Size S62)7)
S6 with
busbar
connection
3RB20 56-2FX2
22 … 90
50 … 200
315
S6 with
box terminals
Size S10/S122)
S10/S12
and size
14
(3TF68/
3TF69)
22 … 110
55 … 250
400
A
3RB20 66-2GF2
1
1 unit
101
1.820
90 … 450
160 … 630
800
A
3RB20 66-2MF2
1
1 unit
101
1.820
3RB20 66-2MF2
1)
The relays with an Order No. ending with "0" are designed for direct
mounting. With the matching terminal brackets (see "Accessories",
page 5/60) the sizes S00 and S0 can also be installed as stand-alone
units.
2)
The relays with an Order No. ending with "2" are designed for direct
mounting and stand-alone installation. For 3TF68/3TF69 contactors, direct
mounting is not possible.
3)
The relays with an Order No. ending with "1" are designed for stand-alone
installation.
4)
Observe maximum rated operational current of the devices.
5)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
6)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors, see Technical Information
LV 1 T "Technical specifications" --> "Short-circuit protection with fuses for
motor feeders".
7)
The relays with an Order No. with "X" in penultimate position are equipped
with a straight-through transformer.
* You can order this quantity or a multiple thereof.
Siemens LV 1 · 2009
5/53
5
Size S01)
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
3RB21 solid-state overload relays with screw terminals on auxiliary current side for direct mounting1)2) and stand-alone
installation2)3), CLASS 5, 10, 20 and 30 adjustable
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• Internal ground-fault detection (activatable)
• Internal power supply
• Auxiliary contacts 1 NO + 1 NC
Size
Rating
contactor4) for induction
motor
Rated value5)
kW
•
•
•
•
Manual and automatic RESET
Electrical remote RESET integrated
Switch position indicators
TEST function and self-monitoring
Current setting
of the inversetime delayed
overload release
Short-circuit DT Screw terminals
(on auxiliary
protection
current side)
with fuse,
type of coorOrder No.
dination 2,
gL/gG operational class6)
A
A
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
Size S001)
S00
0.04 … 0.09
0.1 … 0.4
1
}
3RB21 13-4RB0
1
1 unit
101
0.200
0.12 … 0.37
0.32 … 1.25
2
}
3RB21 13-4NB0
1
1 unit
101
0.200
0.55 … 1.5
1…4
10
}
3RB21 13-4PB0
1
1 unit
101
0.200
1.1 … 5.5
3 … 12
20
}
3RB21 13-4SB0
1
1 unit
101
0.200
3RB21 13-4RB0
Size S01)
5
S0
0.04 … 0.09
0.1 … 0.4
1
}
3RB21 23-4RB0
1
1 unit
101
0.220
0.12 … 0.37
0.32 … 1.25
2
}
3RB21 23-4NB0
1
1 unit
101
0.220
0.55 ... 1.5
1 ... 4
10
}
3RB21 23-4PB0
1
1 unit
101
0.220
1.1 … 5.5
3 … 12
20
}
3RB21 23-4SB0
1
1 unit
101
0.220
3 … 11
6 … 25
35
}
3RB21 23-4QB0
1
1 unit
101
0.220
3 … 11
6 … 25
63
}
3RB21 33-4QB0
1
1 unit
101
0.360
}
3RB21 33-4QW1
1
1 unit
101
0.230
}
3RB21 33-4UB0
1
1 unit
101
0.360
}
3RB21 33-4UW1
1
1 unit
101
0.230
3RB21 23-4QB0
Size S21)3)7)
S2
7.5 … 22
12.5 … 50
80
3RB21 33-4UB0
Size S31)3)7)
S3
7.5 … 22
12.5 … 50
160
}
3RB21 43-4UB0
1
1 unit
101
0.560
11 … 45
25 … 100
315
}
3RB21 43-4EB0
1
1 unit
101
0.560
}
3RB21 43-4EW1
1
1 unit
101
0.450
}
3RB21 53-4FC2
1
1 unit
101
1.030
}
3RB21 53-4FW2
1
1 unit
101
0.690
3RB21 43-4EB0
Size S62)7)
S6 with
busbar
connection
3RB21 53-4FC2
22 … 90
50 … 200
315
S6 with
box terminals
Size S10/S122)
S10/S12
and size
14
(3TF68/
3TF69)
22 … 110
55 … 250
400
}
3RB21 63-4GC2
1
1 unit
101
1.820
90 … 450
160 … 630
800
}
3RB21 63-4MC2
1
1 unit
101
1.820
3RB21 63-4MC2
1)
The relays with an Order No. ending with "0" are designed for direct
mounting. With the matching terminal brackets (see "Accessories",
page 5/60) the sizes S00 and S0 can also be installed as stand-alone
units.
2)
The relays with an Order No. ending with "2" are designed for direct
mounting and stand-alone installation. For 3TF68/3TF69 contactors, direct
mounting is not possible.
3)
The relays with an Order No. ending with "1" are designed for stand-alone
installation.
4)
Observe maximum rated operational current of the devices.
5)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
6)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors, see Technical Information
LV 1 T "Technical specifications" --> "Short-circuit protection with fuses for
motor feeders".
7)
The relays with an Order No. with "W" in penultimate position are
equipped with a straight-through transformer.
* You can order this quantity or a multiple thereof.
5/54
Siemens LV 1 · 2009
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB20, 3RB21 for standard applications
3RB21 solid-state overload relays with spring-loaded terminals on auxiliary current side for direct mounting1)2) and
stand-alone installation1)3), CLASS 5, 10, 20 and 30 adjustable
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• Internal ground-fault detection (activatable)
• Internal power supply
• Auxiliary contacts 1 NO + 1 NC
Size
Rating
contactor4) for induction
motor
Rated value5)
kW
Current setting
of the inversetime delayed
overload release
A
•
•
•
•
Manual and automatic RESET
Electrical remote RESET integrated
Switch position indicators
TEST function and self-monitoring
Short-circuit DT Spring-type
protection
terminals
(on auxiliary
with fuse,
current side)
type of coordination 2,
Order No.
gL/gG operational class6)
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
A
Size S001)
S00
0.04 … 0.09
0.1 … 0.4
1
A
3RB21 13-4RD0
1
1 unit
101
0.200
0.12 … 0.37
0.32 … 1.25
2
A
3RB21 13-4ND0
1
1 unit
101
0.200
0.55 … 1.5
1…4
10
A
3RB21 13-4PD0
1
1 unit
101
0.200
1.1 … 5.5
3 … 12
20
A
3RB21 13-4SD0
1
1 unit
101
0.200
3RB21 13-4RD0
S0
0.04 … 0.09
0.1 … 0.4
1
}
3RB21 23-4RD0
1
1 unit
101
0.220
0.12 … 0.37
0.32 … 1.25
2
}
3RB21 23-4ND0
1
1 unit
101
0.220
0.55 ... 1.5
1 ... 4
10
}
3RB21 23-4PD0
1
1 unit
101
0.220
1.1 … 5.5
3 … 12
20
A
3RB21 23-4SD0
1
1 unit
101
0.220
3 … 11
6 … 25
35
A
3RB21 23-4QD0
1
1 unit
101
0.220
3 … 11
6 … 25
63
A
3RB21 33-4QD0
1
1 unit
101
0.360
A
3RB21 33-4QX1
1
1 unit
101
0.230
A
3RB21 33-4UD0
1
1 unit
101
0.360
A
3RB21 33-4UX1
1
1 unit
101
0.230
3RB21 23-4QD0
Size S21)3)7)
S2
7.5 … 22
12.5 … 50
80
3RB21 33-4UD0
Size S31)3)7)
S3
7.5 … 22
12.5 … 50
160
A
3RB21 43-4UD0
1
1 unit
101
0.560
11 … 45
25 … 100
315
A
3RB21 43-4ED0
1
1 unit
101
0.560
A
3RB21 43-4EX1
1
1 unit
101
0.450
A
3RB21 53-4FF2
1
1 unit
101
1.030
A
3RB21 53-4FX2
1
1 unit
101
0.690
3RB21 43-4ED0
Size S62)7)
S6 with
busbar
connection
3RB21 53-4FX2
22 … 90
50 … 200
315
S6 with
box terminals
Size S10/S122)
S10/S12
and size
14
(3TF68/
3TF69)
22 … 110
55 … 250
400
A
3RB21 63-4GF2
1
1 unit
101
1.820
90 … 450
160 … 630
800
A
3RB21 63-4MF2
1
1 unit
101
1.820
3RB21 63-4MF2
1)
The relays with an Order No. ending with "0" are designed for direct
mounting. With the matching terminal brackets (see "Accessories",
page 5/60) the sizes S00 and S0 can also be installed as stand-alone
units.
2)
The relays with an Order No. ending with "2" are designed for direct
mounting and stand-alone installation. For 3TF68/3TF69 contactors, direct
mounting is not possible.
3)
The relays with an Order No. ending with "1" are designed for stand-alone
installation.
4)
Observe maximum rated operational current of the devices.
5)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
6)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors, see Technical Information
LV 1 T "Technical specifications" --> "Short-circuit protection with fuses for
motor feeders".
7)
The relays with an Order No. with "X" in penultimate position are equipped
with a straight-through transformer.
* You can order this quantity or a multiple thereof.
Siemens LV 1 · 2009
5/55
5
Size S01)
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB22, 3RB23 for high-feature applications
■ Overview
1
2
9
3
5
4
6
5
7
5
8
3RB22/3RB23 evaluation module
(1) Green "READY" LED:
A continuous green light signals that the device is working correctly.
(2) Red "GND FAULT" LED
A continuous red light signals a ground-fault tripping.
(3) Red "THERMISTOR" LED:
A continuous red light signals an active thermistor trip.
(4) Red "OVERLOAD" LED:
A continuous red light signals an active overload trip; a flickering red
light signals an imminent trip (overload warning).
(5) Motor current and trip class adjustment:
Setting the device to the motor current and to the required trip class
dependent on the start-up conditions is easy with the two rotary
switches.
(6) Selector switch for manual/automatic RESET:
With this switch you can choose between manual and automatic
RESET.
(7) Test/RESET button:
Enables testing of all important device components and functions,
plus resetting of the device after a trip when manual RESET is
selected.
(8) Connecting terminals (removable joint block):
The generously sized terminals permit connection of two conductors
with different cross-sections for the auxiliary, control and sensor circuits. Connection is possible with screw connection and alternatively
with spring-type connection.
(9) 3RB29 85 function expansion module:
Enables more functions to be added, e. g. internal ground-fault detection and/or an analog output with corresponding signals.
3RB29 06 current measuring module
5/56
Siemens LV 1 · 2009
The modular, solid-state overload relays with external power
supply type 3RB22 (with monostable auxiliary contacts) and
type 3RB23 (with bistable auxiliary contacts) up to 630 A (up to
820 A possible with a series transformer) have been designed
for inverse-time delayed protection of loads with normal and
heavy starting (see Technical Information LV 1 T, "Function")
against excessive temperature rises due to overload, phase
unbalance or phase failure. An overload, phase unbalance or
phase failure result in an increase of the motor current beyond
the set rated motor current. This current rise is detected by
means of a current measuring module and electronically evaluated by a special evaluation module which is connected to it.
The evaluation electronics sends a signal to the auxiliary contacts. The auxiliary contacts then switch off the load by means of
a contactor. The break time depends on the ratio between the
tripping current and current setting Ie and is stored in the form of
a long-term stable tripping characteristic (see Technical
Information LV 1 T, "Characteristic Curves"). The "tripped" status
is signaled by means of a continuous red "OVERLOAD" LED.
The LED indicates imminent tripping of the relay due to overload,
phase unbalance or phase failure by flickering when the limit
current has been violated. This warning can also be issued as a
signal through auxiliary contacts.
In addition to the described inverse-time delayed protection of
loads against excessive temperature rises, the 3RB22/3RB23
solid-state overload relays also allow direct temperature monitoring of the motor windings (full motor protection) by connection
with broken-wire interlock of a PTC sensor circuit. With this temperature-dependent protection, the loads can be protected
against overheating caused indirectly by reduced coolant flow,
for example, which cannot be detected by means of the current
alone. In the event of overheating, the devices switch off the contactor, and thus the load, by means of the auxiliary contacts. The
"tripped" status is signaled by means of a continuously illuminated "THERMISTOR" LED.
To also protect the loads against high-resistance short-circuits
due to damage to the insulation, humidity, condensed water,
etc., the 3RB22/3RB23 solid-state overload relays offer the possibility of internal ground-fault detection in conjunction with a
function expansion module (for details see "Selection and ordering data", not possible in conjunction with contactor assembly
for Wye-Delta starting). In the event of a ground fault the
3RB22/3RB23 relays trip instantaneously. The "tripped" status is
signaled by means of a continuous red "Ground Fault" LED. Signaling through auxiliary contacts is also possible.
After tripping due to overload, phase unbalance, phase failure,
thermistor or ground-fault tripping, the relay is reset manually or
automatically after the recovery time has elapsed (see
Technical Information LV 1 T, "Function").
In conjunction with a function expansion module the motor current measured by the microprocessor can be output in the form
of an analog signal 4 ... 20 mA DC for operating rotary coil instruments or for feeding into analog inputs of programmable
logic controllers. With an additional AS-Interface analog module
the current values can also be transferred over the AS-i bus
system.
The devices are manufactured in accordance with environmental guidelines and contain environmentally friendly and reusable
materials.
They comply with all important worldwide standards and
approvals.
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB22, 3RB23 for high-feature applications
The 3RB22 (monostable) solid-state overload relays are suitable
for the overload protection of explosion-proof motors with "increased safety" type of protection EEx e. The relays meet the requirements of EN 60079-7 (Electrical apparatus for areas subject to explosion hazards – Increased safety "e");
see Chapter 20 "Appendix" --> "Standards and approvals" -->
"Type overview of approved devices for potentially explosive areas (ATEX explosion protection)".
EC type test certificate for Group II, Category (2) G/D exists. It
has the number PTB 05 ATEX 3022.
■ Benefits
The most important features and benefits of the 3RB22/3RB23
solid-state overload relays are listed in the overview table (see
"Overload Relays" --> "General data").
■ Application
Industries
The 3RB22/3RB23 solid-state overload relays are suitable for
customers from all industries who want to guarantee optimum inverse-time delayed and temperature-dependent protection of
their electrical loads (e. g. motors) under normal and heavy
starting conditions (CLASS 5 to CLASS 30), minimize project
completion times, inventories and power consumption, and optimize plant availability and maintenance management.
Application
The 3RB22/3RB23 solid-state overload relays have been designed for the protection of three-phase asynchronous and single-phase AC motors.
If single-phase AC motors are to be protected by the
3RB22/3RB23 solid-state overload relays, the main current
paths of the current measuring modules must be series-connected (see Technical Information LV 1 T, "Schematics").
Ambient conditions
The devices are insensitive to external influences such as
shocks, corrosive environments, ageing and temperature
fluctuation.
For the temperature range from –25 °C to +60 °C, the
3RB22/3RB23 solid-state overload relays compensate the temperature according to IEC 60947-4-1.
Configuration notes for use of the devices below –25 °C or above
+60 °C on request.
■ Accessories
The following accessories are available for the 3RB22/3RB23
solid-state overload relays:
• A sealable cover for the evaluation module
• Box terminal blocks for the current measuring modules size S6
and S10/S12
• Terminal covers for the current measuring modules size S6
and S10/S12
• Push-in lugs for screw fixing the sizes S00 to S3 current measuring modules
Siemens LV 1 · 2009
5/57
5
"Increased safety" type of protection EEx e according to
ATEX directive 94/9/EC
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB22, 3RB23 for high-feature applications
■ Selection and ordering data
3RB22/3RB23 solid-state overload relays for full motor protection with screw terminals or spring-loaded terminals
for stand-alone installation, CLASS 5, 10, 20 and 30 adjustable
Features and technical specifications:
• Overload protection, phase failure protection and unbalance
protection
• External power supply 24 ... 240 V AC/DC
• Auxiliary contacts 2 NO + 2 NC
• Manual and automatic RESET
• Electrical remote RESET integrated
• 4 LEDs for operating and status displays
Size of
contactor
• TEST function and self-monitoring
• Internal ground-fault detection with function expansion
module
• Screw terminals or spring-loaded terminals for auxiliary,
control and sensor circuits
• Input for PTC sensor circuit
• Analog output with function expansion module
Version
DT Screw terminals
Order No.
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
Evaluation modules
S00 ... S12
Monostable
}
3RB22 83-4AA1
1
1 unit
101
0.300
Bistable
}
3RB23 83-4AA1
1
1 unit
101
0.300
Version
DT Spring-type
terminals
5
3RB2. 83-4AA1
Size of
contactor
PU
(UNIT,
SET, M)
Order No.
PS*
PG
Weight
per PU
approx.
Price
per PU
kg
Evaluation modules
S00 ... S12
Monostable
A
3RB22 83-4AC1
1
1 unit
101
0.300
Bistable
A
3RB23 83-4AC1
1
1 unit
101
0.300
Version
DT Order No.
3RB2. 83-4AC1
Size of
contactor
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Function expansion modules
For plugging into evaluation module (1 unit)
S00 ... S12
Analog Basic 1 modules1)
Analog output 4 ... 20 mA DC,
with overload warning
}
3RB29 85-2AA0
1
1 unit
101
0.030
Analog Basic 1 GF modules1)2)
Analog output 4 ... 20 mA DC,
with internal ground-fault detection and
overload warning
}
3RB29 85-2AA1
1
1 unit
101
0.030
Analog Basic 2 GF modules1)2)
Analog output 4 ... 20 mA DC,
with internal ground-fault detection and
ground-fault signaling
}
3RB29 85-2AB1
1
1 unit
101
0.030
Basic 1 GF modules2)
with internal ground-fault detection and
overload warning
}
3RB29 85-2CA1
1
1 unit
101
0.030
Basic 2 GF modules2)
with internal ground-fault detection and
ground-fault signaling
}
3RB29 85-2CB1
1
1 unit
101
0.030
Note: Analog input modules, e. g. SM 331, must be configured
for 4-wire measuring transducers. In this case the analog input
module must not supply current to the analog output of the
3RB22/ 3RB23 relay.
1)
The analog signal 4 ... 20 mA DC can be used for operating rotary coil
instruments or for feeding into analog inputs of programmable logic
controllers.
2)
The following information on ground-fault protection refers to sinusoidal
residual currents at 50/60 Hz:
- With a motor current of between 0.3 and 2 times the current setting Ie the
unit will trip at a ground-fault current equal to 30 % of the set current.
- With a motor current of between 2 and 8 times the current setting Ie the
unit will trip at a ground-fault current equal to 15 % of the set current.
- The response delay amounts to between 0.5 and 1 second.
* You can order this quantity or a multiple thereof.
5/58
Siemens LV 1 · 2009
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
3RB22, 3RB23 for high-feature applications
Current measuring modules for direct mounting
Size of
Rating
contactor3) for induction
motor
rated value4)
1)
and stand-alone installation1)2)
Current setting of
the inverse-time
delayed overload release
Short-circuit DT Order No.
protection
with fuse,
type of coordination 2,
gL/gG operational class5)
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
kW
A
0.09 … 1.1
0.3 … 3
20
}
3RB29 06-2BG1
1
1 unit
101
0.100
1.1 … 11
2.4 … 25
63
}
3RB29 06-2DG1
1
1 unit
101
0.150
5.5 … 45
10 … 100
315
}
3RB29 06-2JG1
1
1 unit
101
0.350
S6 with
11 … 90
busbar
connection
20 … 200
315
}
3RB29 56-2TH2
1
1 unit
101
1.000
}
3RB29 56-2TG2
1
1 unit
101
0.600
}
3RB29 66-2WH2
1
1 unit
101
1.750
Size S00/S02)6)
S00/S0
3RB29 06-2.G1
Size S2/S32)6)
S2/S3
3RB29 06-2JG1
3RB29 56-2TG2
S6 with
box terminals
Size S10/S121)
S10/S12
37 … 450
and size
14 (3TF68/
3TF69)
63 … 630
800
3RB29 66-2WH2
Note:
The connecting cable between the current measuring module
and the evaluation module is not included in the scope of supply; please order separately.
1)
The current measuring modules with an Order No. ending with "2" are
designed for direct mounting and stand-alone installation. For
3TF68/3TF69 contactors, direct mounting is not possible.
2)
The current measuring modules with an Order No. ending with "1" are
designed for stand-alone installation.
3)
Observe maximum rated operational current of the devices.
4)
Guide value for 4-pole standard motors at 50 Hz 400 V AC. The actual
starting and rated data of the motor to be protected must be considered
when selecting the units.
5)
Maximum protection by fuse for overload relay, type of coordination 2.
For fuse values in conjunction with contactors, see Technical Inforamtion
LV 1 T "Technical specifications" --> "Short-circuit protection with fuses for
motor feeders".
6)
The modules with an Order No. with "G" in penultimate position are
■ Accessories
Size of
contactor
Version
DT Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Connecting cables (essential accessory)
For connection between evaluation module and
current measuring module
S00 ...S3
• Length 0.1 m
(only for mounting of the evaluation module
directly onto the current measuring module)
S00 ... S12 • Length 0.5 m
}
3RB29 87-2B
1
1 unit
101
0.010
}
3RB29 87-2D
1
1 unit
101
0.020
3RB29 87-2.
For more accessories, see page 5/60.
* You can order this quantity or a multiple thereof.
Siemens LV 1 · 2009
5/59
5
Size S61)6)
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
Accessories
■ Overview
Overload relays for standard applications
Overload relays for high-feature applications
The following optional accessories are available for the
3RB20/3RB21 solid-state overload relays:
• One terminal bracket each for the overload relays size S00
and S0 (sizes S2 to S12 can be installed as stand-alone installation without a terminal bracket)
• One mechanical remote RESET module for all sizes
• One cable release for resetting devices which are difficult to
access (for all sizes)
• One sealable cover for all sizes
• Box terminal blocks for sizes S6 and S10/S12
• Terminal covers for sizes S2 to S10/S12
The following optional accessories are available for the
3RB22/3RB23 solid-state overload relays:
• A sealable cover for the evaluation module
• Box terminal blocks for the current measuring modules size S6
and S10/S12
• Terminal covers for the current measuring modules size S6
and S10/S12
• Push-in lugs for screw fixing the sizes S00 to S3 current measuring modules
■ Selection and ordering data
Version
Size
DT Order No.
Price
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Terminal brackets for stand-alone installation1)
S00
}
3RB29 13-0AA1
1
1 unit
101
0.060
S0
}
3RB29 23-0AA1
1
1 unit
101
0.080
Resetting plungers, holders and formers S00 ...
S10/S12
}
3RU19 00-1A
1
1 unit
101
0.038
Pushbuttons with extended stroke
(12 mm), IP65, Ø 22 mm
B
3SB30 00-0EA11
1
1 unit
102
0.020
Extension plungers
For compensation of the distance between
a pushbutton and the unlatching button of
the relay
A
3SX1 335
1
1 unit
102
0.004
• Length 400 mm
}
3RU19 00-1B
1
1 unit
101
0.063
• Length 600 mm
}
3RU19 00-1C
1
1 unit
101
0.073
5
For separate mounting of the overload
relays; screw and snap-on mounting onto
TH 35 standard mounting rail
3RB29 .3-0AA1
Mechanical RESET2)
3RU19 00-1A
with pushbutton and
extension plunger
Cable releases with holder for RESET2)
For Ø 6.5 mm holes
in the control panel;
max. control panel thickness 8 mm
S00 ...
S10/S12
3RU19 00-1.
1)
Only for 3RB20/3RB21.
2)
Only for 3RB20/3RB21. The accessories are identical to those of the
3RU11 thermal overload relays.
* You can order this quantity or a multiple thereof.
5/60
Siemens LV 1 · 2009
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
Accessories
Version
Size
DT Order No.
Price
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Sealable covers
For covering the setting knobs
• For 3RB20/3RB21
S00 ...
S10/S12
}
3RB29 84-0
1 10 units
101
0.020
• For 3RB22/3RB23
--
}
3RB29 84-2
1 10 units
101
0.050
Terminal covers
Covers for cable lugs and busbar
connections
3RT19 36-4EA2
The figures show mounting on the contactor
S3
}
3RT19 46-4EA1
1
1 unit
101
0.040
S6
}
3RT19 56-4EA1
1
1 unit
101
0.070
• Length 120 mm
S10/S12
}
3RT19 66-4EA1
1
1 unit
101
0.130
• Length 20.6 mm1)
S2
}
3RT19 36-4EA2
1
1 unit
101
0.020
• Length 20.8 mm1)
S3
}
3RT19 46-4EA2
1
1 unit
101
0.025
• Length 25 mm
S6
}
3RT19 56-4EA2
1
1 unit
101
0.030
• Length 30 mm
S10/S12
}
3RT19 66-4EA2
1
1 unit
101
0.040
Covers for screw terminals
Between contactor and overload relay,
without box terminals
(1 unit required per combination)
S6
}
3RT19 56-4EA3
1
1 unit
101
0.020
S10/S12
}
3RT19 66-4EA3
1
1 unit
101
0.060
• Up to 70 mm2
S62)
}
3RT19 55-4G
1
1 unit
101
0.230
• Up to 120 mm2
S6
}
3RT19 56-4G
1
1 unit
101
0.260
• Up to 240 mm2
S10/S12
}
3RT19 66-4G
1
1 unit
101
0.676
For screw fixing of 3RB22/3RB23
overload relays
--
}
3RP19 03
1 10 units
101
0.002
For screw fixing of 3RB29 06 current
measuring modules
(2 units are required per module)
S00 ...S3
A
3RB19 00-0B
100 10 units
101
0.100
044
0.032
Covers for box terminals
Box terminal blocks
For round and ribbon cables
For conductor cross-sections
see Technical Information LV 1 T,
"Technical specifications".
3RT19 5.-4G
Push-in lugs
3RP19 03
3RB19 00-0B
Tools for opening spring-loaded terminals by hand
Screwdrivers,
2.5 mm x 0.4 mm,
length approx. 160 mm; green,
suitable for a max. conductor crosssection of 1.5 mm2
Can be
C
used for
auxiliary circuit connections
1)
Only for 3RB20/3RB21. The accessories are identical to those of the
3RU11 thermal overload relays.
2)
In the scope of supply for 3RT10 54-1 contactors (55 kW).
8WH9 200-0AA00
1
10 units
* You can order this quantity or a multiple thereof.
Siemens LV 1 · 2009
5/61
5
3RT19 46-4EA1
• Length 55 mm1)
• Length 100 mm
© Siemens AG 2009
Overload Relays
3RB2 Solid-State Overload Relays
Accessories
Version
Size/
Color
Use
DT Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
Tools for opening Cage Clamp terminals
Screwdrivers
3.5 mm x 0.5 mm,
suitable for a max.
conductor cross-section of 2.5 mm2
8WA2 803
Length approx.
175 mm;
green, partially
insulated
Main and
C
auxiliary circuit connections
8WA2 880
1
1 unit
041
0.034
Length approx.
175 mm;
green
C
8WA2 803
1
1 unit
041
0.024
10 mm x 7 mm, 3RB2,
pastel turquoise 3RU11
D
3RT19 00-1SB10
100
816 units
101
24.000
20 mm x 7 mm,
pastel turquoise
C
3RT19 00-1SB20
100
340 units
101
0.200
19 mm x 6 mm, 3RB2,
pastel turquoise 3RU11
D
3RT19 00-1SB60
100
3060 units
101
15.000
19 mm x 6 mm
zinc yellow
C
3RT19 00-1SD60
100
3060 units
101
12.000
Blank labels
Unit labeling plates
For SIRIUS devices
Inscription labels for
sticking
For SIRIUS devices
3RT19 00-1SB10
Computer labeling systems
For individual inscription of unit labeling
plates
Obtainable from:
murrplastik Systemtechnik GmbH
5
http://www.murrplastik.com
* You can order this quantity or a multiple thereof.
5/62
Siemens LV 1 · 2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement