Quadruple Operational Amplifiers LM124, LM224K, FEATURES

Quadruple Operational Amplifiers LM124, LM224K, FEATURES
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
Quadruple Operational Amplifiers
Check for
Samples: LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K,
LM2902KV, LM2902KAV
FEATURES
DESCRIPTION
•
These devices consist of four independent high-gain
frequency-compensated operational amplifiers that
are designed specifically to operate from a single
supply over a wide range of voltages. Operation from
split supplies also is possible if the difference
between the two supplies is 3 V to 32 V (3 V to 26 V
for the LM2902 device), and VCC is at least 1.5 V
more positive than the input common-mode voltage.
The low supply-current drain is independent of the
magnitude of the supply voltage.
1
•
•
•
•
•
•
•
•
2-kV ESD Protection for:
– LM224K, LM224KA
– LM324K, LM324KA
– LM2902K, LM2902KV, LM2902KAV
Wide Supply Ranges
– Single Supply: 3 V to 32 V (26 V for
LM2902)
– Dual Supplies: ±1.5 V to ±16 V (±13 V for
LM2902)
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typ
Common-Mode Input Voltage Range Includes
Ground, Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters
– Input Offset Voltage: 3 mV Typ
MM A Versions: 2 mV Typ
– Input Offset Current: 2 nA Typ
– Input Bias Curren: 20 nA Typ
MMA Versions: 15 nA Typ
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage:
32 V (26 V for LM2902)
Open-Loop Differential Voltage Amplification:
100 V/mV Typ
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include
Testing of All Parameters.
Applications include transducer amplifiers, dc
amplification blocks, and all the conventional
operational-amplifier circuits that now can be more
easily implemented in single-supply-voltage systems.
For example, the LM124 device can be operated
directly from the standard 5-V supply that is used in
digital systems and provides the required interface
electronics, without requiring additional ±15-V
supplies.
LM124 . . . D, J, OR W PACKAGE
LM124A . . . J OR W PACKAGE
LM224, LM224A, LM224K, LM224KA . . . D OR N PACKAGE
LM324, LM324K . . . D, N, NS, OR PW PACKAGE
LM324A . . . D, DB, N, NS, OR PW PACKAGE
LM324KA . . . D, N, NS, OR PW PACKAGE
LM2902 . . . D, N, NS, OR PW PACKAGE
LM2902K . . . D, DB, N, NS, OR PW PACKAGE
LM2902KV, LM2902KAV . . . D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN−
1IN+
VCC
2IN+
2IN−
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1975–2014, Texas Instruments Incorporated
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Symbol (Each Amplifier)
1IN−
1OUT
NC
4OUT
4IN−
IN−
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4IN+
NC
GND
NC
3IN+
2IN−
2OUT
NC
3OUT
3IN−
4
OUT
IN+
+
1IN+
NC
VCC
NC
2IN+
−
LM124, LM124A . . . FK PACKAGE
(TOP VIEW)
NC − No internal connection
Schematic (Each Amplifier)
VCC
≈6-µA
Current
Regulator
≈6-µA
Current
Regulator
≈100-µA
Current
Regulator
OUT
IN−
†
≈50-µA
Current
Regulator
IN+
†
GND
To Other
Amplifiers
COMPONENT COUNT
(total device)
Epi-FET
Transistors
Diodes
Resistors
Capacitors
†
2
1
95
4
11
4
ESD protection cells - available on LM324K and LM324KA only
Submit Documentation Feedback
Copyright © 1975–2014, Texas Instruments Incorporated
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
Supply voltage, VCC (2)
Differential input voltage, VID
(3)
Input voltage, VI (either input)
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C, VCC ≤ 15 V
Package thermal impedance, θJA
(4) (5)
Package thermal impedance, θJC
(6) (7)
(4)
±16 or 32
V
±26
±32
V
–0.3 to 26
–0.3 to 32
V
Unlimited
86
DB package
96
96
N package
80
80
NS package
76
76
PW package
113
5.61
J package
15.05
W package
14.65
150
J or W package
Storage temperature range, Tstg
°C/W
113
FK package
FK package
(7)
±13 or 26
86
Lead temperature 1,6 mm (1/16 inch) from case for 60
seconds
(6)
UNIT
Unlimited
Case temperature for 60 seconds
(2)
(3)
(4)
(5)
ALL OTHER
DEVICES
D package
Operating virtual junction temperature, TJ
(1)
LM2902
°C/W
150
°C
260
°C
300
300
°C
–65 to 150
–65 to 150
°C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
Differential voltages are at IN+, with respect to IN−.
Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
Maximum power dissipation is a function of TJ(max), θJA, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with MIL-STD-883
ESD Protection
TEST CONDITIONS
Human-Body Model
TYP
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
Copyright © 1975–2014, Texas Instruments Incorporated
UNIT
±2
Submit Documentation Feedback
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
kV
3
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
www.ti.com
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS (1)
PARAMETER
VIO
Input offset voltage
IIO
Input offset current
IIB
Input bias current
VCC = 5 V to MAX, VIC = VICRmin,
VO = 1.4 V
TA (2)
LM124, LM224
MIN
25°C
2
High-level output voltage
VO = 1.4 V
RL = 2 kΩ
25°C
RL = 10 kΩ
25°C
VIC = VICRmin
kSVR
Supply-voltage rejection ratio
(ΔVCC /ΔVIO)
VO1/ VO2
Crosstalk attenuation
4
–20
–250
–500
0 to
VCC – 2
VCC – 1.5
VCC – 1.5
26
27
Common-mode rejection ratio
(2)
(3)
–150
0 to
VCC – 2
Full range
CMRR
(1)
50
150
0 to
VCC – 1.5
RL ≥ 10 kΩ
AVD
Supply current (four amplifiers)
2
V
V
VCC = 15 V, VO = 1 V to 11 V,
RL ≥ 2 kΩ
ICC
30
0 to
VCC – 1.5
26
Large-signal differential voltage
amplification
Short-circuit output current
9
–300
Full range
RL ≤ 10 kΩ
IOS
–20
RL = 2 kΩ
Low-level output voltage
Output current
7
nA
VOL
IO
3
100
Full range
VCC = 5 V to MAX
VCC = MAX
MAX
nA
Full range
Full range
VOH
5
UNIT
TYP (3)
mV
25°C
Common-mode input voltage range
3
MIN
7
25°C
VICR
MAX
Full range
25°C
VO = 1.4 V
LM324, LM324K
TYP (3)
Full range
28
5
27
28
25
100
20
100
5
20
50
Full range
25
25°C
70
80
65
80
dB
25°C
65
100
65
100
dB
V/mV
15
f = 1 kHz to 20 kHz
25°C
VCC = 15 V,
VID = 1 V,
VO = 0
25°C
–20
Full range
–10
25°C
10
Full range
5
VID = –1 V, VO = 200 mV
25°C
12
VCC at 5 V, VO = 0,
GND at –5 V
25°C
±40
±60
±40
±60
VO = 2.5 V, No load
Full range
0.7
1.2
0.7
1.2
VCC = MAX, VO = 0.5 VCC,
No load
Full range
1.4
3
1.4
3
VCC = 15 V,
VID = –1 V,
VO = 15 V
mV
25°C
120
–30
120
–60
–20
–30
dB
–60
Source
–10
mA
20
10
20
Sink
5
30
12
μA
30
mA
mA
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2902 and 30 V for the others.
Full range is –55°C to 125°C for LM124, –25°C to 85°C for LM224, and 0°C to 70°C for LM324.
All typical values are at TA = 25°C
Submit Documentation Feedback
Copyright © 1975–2014, Texas Instruments Incorporated
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
ΔVIO/ΔT
Input offset voltage temperature drift
TEST CONDITIONS (1)
VCC = 5 V to MAX,
VIC = VICRmin,
VO = 1.4 V
Non-A-suffix
devices
TA (2)
LM2902
MIN
25°C
3
Full range
Input offset current
ΔIIO/ΔT
Input offset voltage temperature drift
Input bias current
Common-mode input voltage range
RS = 0 Ω
VO = 1.4 V
1
4
2
AVD
Large-signal differential voltage
amplification
CMRR
Common-mode rejection ratio
VIC = VICRmin
kSVR
Supply-voltage rejection ratio
(ΔVCC /ΔVIO)
VO1/ VO2
Crosstalk attenuation
IO
Output current
IOS
Short-circuit output current
ICC
Supply current (four amplifiers)
(1)
(2)
(3)
50
2
300
150
–250
–20
pA/°C
–250
nA
–500
–500
0 to
VCC – 1.5
0 to
VCC – 1.5
0 to
VCC – 2
0 to
VCC – 2
V
25°C
VCC – 1.5
VCC – 1.5
RL = 2 kΩ
Full range
25°C
22
26
RL ≥ 10 kΩ
Full range
23
Full range
24
5
V
27
20
100
5
25
20
mV
25°C
25
Full range
15
100
25°C
50
80
60
80
dB
25°C
50
100
60
100
dB
V/mV
f = 1 kHz to 20 kHz
25°C
VCC = 15 V,
VID = 1 V,
VO = 0
25°C
–20
Full range
–10
25°C
10
Full range
5
VCC = 15 V,
VID = –1 V,
VO = 15 V
μV/°C
50
10
–20
Full range
RL = 10 kΩ
VCC = 15 V,
VO = 1 V to 11 V,
RL ≥ 2 kΩ
2
nA
VCC = 5 V to MAX
RL ≤ 10 kΩ
7
7
Full range
VO = 1.4 V
Low-level output voltage
UNIT
MAX
10
Ful range
VCC = MAX
VOL
3
Ful range
RL = 2 kΩ
High-level output voltage
TYP (3)
Full range
Full range
VOH
7
25°C
25°C
VICR
MIN
mV
A-suffix
devices
25°C
IIB
MAX
10
25°C
IIO
LM2902V
TYP (3)
15
120
–30
120
–60
–20
–30
dB
–60
Source
–10
mA
20
10
12
20
Sink
5
μA
VID = –1 V, VO = 200 mV
25°C
30
VCC at 5 V, VO = 0, GND at –5 V
25°C
±40
±60
±40
40
±60
VO = 2.5 V, No load
Full range
0.7
1.2
0.7
1.2
VCC = MAX, VO = 0.5 VCC,
No load
Full range
1.4
3
1.4
3
mA
mA
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2902 and 32 V for LM2902V.
Full range is –40°C to 125°C for LM2902.
All typical values are at TA = 25°C.
Copyright © 1975–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
5
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
www.ti.com
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS (1)
VIO
Input offset
voltage
VCC = 5 V to 30 V,
VIC = VICRmin,
VO = 1.4 V
IIO
Input offset
current
VO = 1.4 V
IIB
Input bias
current
VO = 1.4 V
VICR
Common-mode
input voltage
range
25°C
–50
Full range
–100
–15
UNIT
TYP (3)
MAX
2
3
5
15
2
30
75
–80
–15
–100
–100
0 to
VCC – 1.5
0 to
VCC – 1.5
0 to
VCC − 2
0 to
VCC – 2
0 to
VCC – 2
VCC – 1.5
26
RL≥10kΩ
Full range
27
27
VIC = VICRmin
kSVR
Supply-voltage
rejection ratio
(ΔVCC /ΔVIO)
VO1/ VO2
Crosstalk
attenuation
Full range
f = 1 kHz to 20 kHz
–200
0 to
VCC − 1.5
VCC – 1.5
Common-mode
rejection ratio
6
3
MIN
30
26
CMRR
(1)
(2)
(3)
2
2
VCC − 1.5
VCC = 15 V,
VO = 1 V to 11 V,
RL ≥ 2 kΩ
Supply current
(four amplifiers)
30
25°C
Large-signal
differential
voltage
amplification
ICC
10
MAX
mV
Full range
AVD
Short-circuit
output current
25°C
Full range
LM324A, LM324KA
TYP (3)
4
RL=2kΩ
RL ≤ 10 kΩ
IOS
4
Full range
Low-level output
voltage
Output current
Full range
MIN
nA
VOL
IO
LM224A
MAX
2
VCC = 30 V
VCC = 15 V,
VID = 1 V,
VO = 0
TYP (3)
25°C
25°C
VCC = 30 V
LM124A
MIN
nA
RL = 2 kΩ
High-level
output voltage
VOH
TA (2)
20
100
26
28
5
50
V
27
20
100
V
28
5
25
20
25°C
50
100
Full range
25
25
25°C
70
70
80
65
80
dB
25°C
65
65
100
65
100
dB
120
dB
V/mV
25°C
120
15
120
25°C
–20
–20
Full range
–10
–10
25°C
10
10
Full range
5
5
VID = −1 V, VO = 200 mV
25°C
12
VCC at 5 V, GND at –5 V,
VO = 0
25°C
±40
±60
±40
±60
±40
±60
VO = 2.5 V, No load
Full range
0.7
1.2
0.7
1.2
0.7
1.2
VCC = 30 V, VO = 15 V,
No load
Full range
1.4
3.
1.4
3
1.4
3
VCC = 15 V,
VID = –1 V,
VO = 15 V
mV
–30
–60
–20
–30
–60
Source
–10
mA
20
1
20
Sink
12
5
30
12
μA
30
mA
mA
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.
Full range is –55°C to 125°C for LM124A, –25°C to 85°C for LM224A, and 0°C to 70°C for LM324A.
All typical values are at TA = 25°C.
Submit Documentation Feedback
Copyright © 1975–2014, Texas Instruments Incorporated
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
Operating Conditions
VCC = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
TYP
UNIT
SR
Slew rate at unity gain
RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 1)
0.5
V/μs
B1
Unity-gain bandwidth
RL = 1 MΩ, CL = 20 pF (see Figure 1)
1.2
MHz
Vn
Equivalent input noise voltage
RS = 100 Ω, VI = 0 V, f = 1 kHz (see Figure 2)
35
nV/√Hz
900 Ω
VCC+
VCC+
−
VI
VO
+
100 Ω
−
VI = 0 V
RS
VCC−
CL
RL
VO
+
VCC−
Figure 1. Unity-Gain Amplifier
Copyright © 1975–2014, Texas Instruments Incorporated
Figure 2. Noise-Test Circuit
Submit Documentation Feedback
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
7
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
www.ti.com
REVISION HISTORY
Changes from Revision U (August 2010) to Revision V
Page
•
Updated document to new TI data sheet format - no specification changes. ...................................................................... 1
•
Updated Features. ................................................................................................................................................................ 1
•
Added ESD warning. ............................................................................................................................................................ 2
•
Removed Ordering Information table. ................................................................................................................................... 2
8
Submit Documentation Feedback
Copyright © 1975–2014, Texas Instruments Incorporated
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
5962-7704301VCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-7704301VC
A
LM124JQMLV
5962-9950403V9B
ACTIVE
XCEPT
KGD
0
100
TBD
Call TI
N / A for Pkg Type
-55 to 125
5962-9950403VCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-9950403VC
A
LM124AJQMLV
77043012A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
77043012A
LM124FKB
7704301CA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704301CA
LM124JB
7704301DA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704301DA
LM124WB
77043022A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
77043022A
LM124AFKB
7704302CA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704302CA
LM124AJB
7704302DA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704302DA
LM124AWB
JM38510/11005BCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510
/11005BCA
LM124ADR
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-55 to 125
LM124AFKB
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
77043022A
LM124AFKB
LM124AJ
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
LM124AJ
LM124AJB
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704302CA
LM124AJB
LM124AWB
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704302DA
LM124AWB
LM124D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-55 to 125
LM124
LM124DG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-55 to 125
LM124
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM124DR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-55 to 125
LM124
LM124DRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-55 to 125
LM124
LM124FKB
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
77043012A
LM124FKB
LM124J
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
LM124J
LM124JB
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704301CA
LM124JB
LM124N
OBSOLETE
PDIP
N
14
TBD
Call TI
Call TI
-55 to 125
LM124W
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
LM124W
LM124WB
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
7704301DA
LM124WB
LM224AD
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224A
LM224ADE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-25 to 85
LM224ADG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224A
LM224ADR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-25 to 85
LM224A
LM224ADRE4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224A
LM224ADRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224A
LM224AN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224AN
LM224ANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224AN
LM224D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224
LM224DE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-25 to 85
LM224DG4
ACTIVE
SOIC
D
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
50
Addendum-Page 2
LM224
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
2500
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-25 to 85
TBD
Call TI
Call TI
-25 to 85
Device Marking
(4/5)
LM224DR
ACTIVE
SOIC
D
14
LM224DRE4
ACTIVE
SOIC
D
14
LM224DRG3
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-25 to 85
LM224
LM224DRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224
LM224KAD
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224KA
LM224KADE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-25 to 85
LM224KADG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224KA
LM224KADR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224KA
LM224KADRE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-25 to 85
LM224KADRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224KA
LM224KAN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224KAN
LM224KANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224KAN
LM224KDR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224K
LM224KDRE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-25 to 85
LM224KDRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-25 to 85
LM224K
LM224KN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224KN
LM224KNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224KN
LM224N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224N
Addendum-Page 3
LM224
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM224NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-25 to 85
LM224N
LM2902D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902DE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LM2902DG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902DR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902DRE4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902DRG3
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902DRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902KAVQDR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KA
LM2902KAVQDRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KA
LM2902KAVQPWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KA
LM2902KAVQPWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KA
LM2902KD
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902K
LM2902KDB
ACTIVE
SSOP
DB
14
80
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902K
LM2902KDBE4
ACTIVE
SSOP
DB
14
80
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902K
LM2902KDBG4
ACTIVE
SSOP
DB
14
TBD
Call TI
Call TI
-40 to 125
LM2902KDE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LM2902KDG4
ACTIVE
SOIC
D
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
50
Addendum-Page 4
LM2902K
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
2500
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
Device Marking
(4/5)
LM2902KDR
ACTIVE
SOIC
D
14
LM2902KDRE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LM2902KDRG4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LM2902KN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 125
LM2902KN
LM2902KNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 125
LM2902KN
LM2902KNSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902K
LM2902KNSRE4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
-40 to 125
LM2902KNSRG4
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902K
LM2902KPW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902K
LM2902KPWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902K
LM2902KPWG4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LM2902KPWR
ACTIVE
TSSOP
PW
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902KPWRE4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LM2902KPWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902K
LM2902KVQDR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KV
LM2902KVQDRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KV
LM2902KVQPWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KV
LM2902KVQPWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902KV
LM2902N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 125
LM2902N
2000
Addendum-Page 5
LM2902K
L2902K
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM2902NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 125
LM2902N
LM2902NSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902
LM2902NSRG4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
-40 to 125
LM2902PW
ACTIVE
TSSOP
PW
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM2902PWE4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LM2902PWG4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LM2902PWLE
OBSOLETE
TSSOP
PW
14
LM2902PWR
ACTIVE
TSSOP
PW
14
LM2902PWRE4
ACTIVE
TSSOP
PW
14
LM2902PWRG3
ACTIVE
TSSOP
PW
14
LM2902PWRG4
ACTIVE
TSSOP
PW
14
LM2902QN
OBSOLETE
PDIP
N
14
LM324AD
ACTIVE
SOIC
D
14
LM324ADBLE
OBSOLETE
SSOP
DB
14
LM324ADBR
ACTIVE
SSOP
DB
14
LM324ADBRE4
ACTIVE
SSOP
DB
14
LM324ADBRG4
ACTIVE
SSOP
DB
14
LM324ADE4
ACTIVE
SOIC
D
14
LM324ADG4
ACTIVE
SOIC
D
14
LM324ADR
ACTIVE
SOIC
D
14
90
L2902
TBD
Call TI
Call TI
-40 to 125
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 125
L2902
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902
2000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L2902
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2902
TBD
Call TI
Call TI
-40 to 125
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
TBD
Call TI
Call TI
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
TBD
Call TI
Call TI
0 to 70
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
TBD
Call TI
Call TI
0 to 70
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 70
2000
50
2500
Addendum-Page 6
LM324A
LM324A
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM324ADRE4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
LM324ADRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
LM324AN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
LM324AN
LM324ANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
LM324AN
LM324ANSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
LM324ANSRE4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
0 to 70
LM324ANSRG4
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324A
LM324APW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324A
LM324APWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324A
LM324APWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324A
LM324APWLE
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
LM324APWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 70
L324A
LM324APWRE4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324A
LM324APWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324A
LM324D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324DE4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324DG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324DR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 70
LM324
Addendum-Page 7
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM324DRE4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324DRG3
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
0 to 70
LM324
LM324DRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324KAD
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KA
LM324KADE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KADG4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KADR
ACTIVE
SOIC
D
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KADRE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KADRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KA
LM324KAN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
LM324KAN
LM324KANE4
ACTIVE
PDIP
N
14
TBD
Call TI
Call TI
0 to 70
LM324KANSR
ACTIVE
SO
NS
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KANSRE4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
0 to 70
LM324KANSRG4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
0 to 70
LM324KAPW
ACTIVE
TSSOP
PW
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KAPWE4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
LM324KAPWG4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
LM324KAPWR
ACTIVE
TSSOP
PW
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KAPWRE4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
2500
2000
90
2000
Addendum-Page 8
LM324KA
LM324KA
L324KA
L324KA
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM324KAPWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324KA
LM324KD
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324K
LM324KDE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KDG4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KDR
ACTIVE
SOIC
D
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KDRE4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KDRG4
ACTIVE
SOIC
D
14
TBD
Call TI
Call TI
0 to 70
LM324KN
ACTIVE
PDIP
N
14
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
LM324KNE4
ACTIVE
PDIP
N
14
TBD
Call TI
Call TI
0 to 70
LM324KNSR
ACTIVE
SO
NS
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KNSRE4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
0 to 70
LM324KNSRG4
ACTIVE
SO
NS
14
TBD
Call TI
Call TI
0 to 70
LM324KPW
ACTIVE
TSSOP
PW
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324KPWE4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
LM324KPWG4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
LM324KPWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324K
LM324KPWRE4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324K
LM324KPWRG4
ACTIVE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
LM324N
ACTIVE
PDIP
N
14
Pb-Free
(RoHS)
CU NIPDAU | CU SN
N / A for Pkg Type
0 to 70
2500
25
2000
90
25
Addendum-Page 9
LM324K
LM324KN
LM324K
L324K
LM324N
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LM324NE3
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
LM324N
LM324NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
LM324N
LM324NSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324NSRE4
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324NSRG4
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
LM324
LM324PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324
LM324PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324
LM324PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324
LM324PWLE
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
0 to 70
LM324PWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 70
L324
LM324PWRE4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324
LM324PWRG3
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
0 to 70
L324
LM324PWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
L324
LM324Y
OBSOLETE
DIESALE
Y
0
TBD
Call TI
Call TI
M38510/11005BCA
ACTIVE
CDIP
J
14
TBD
A42
N / A for Pkg Type
1
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 10
-55 to 125
JM38510
/11005BCA
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM124, LM124-SP, LM124M, LM2902 :
• Catalog: LM124, LM124
• Automotive: LM2902-Q1
• Enhanced Product: LM2902-EP
• Military: LM124M, LM124M
• Space: LM124-SP, LM124-SP
Addendum-Page 11
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
• Enhanced Product - Supports Defense, Aerospace and Medical Applications
• Military - QML certified for Military and Defense Applications
• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 12
PACKAGE MATERIALS INFORMATION
www.ti.com
29-Apr-2014
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LM124DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM224ADR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM224ADR
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM224ADRG4
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM224ADRG4
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM224DR
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM224DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM224DRG3
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM224KADR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM224KDR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM2902DR
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM2902DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM2902DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM2902DRG3
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM2902DRG4
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM2902KAVQPWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902KAVQPWRG4
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902KDR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
29-Apr-2014
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LM2902KNSR
SO
NS
14
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
LM2902KPWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902KVQPWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902KVQPWRG4
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902NSR
SO
NS
14
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
LM2902PWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902PWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902PWRG3
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM2902PWRG4
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324ADBR
SSOP
DB
14
2000
330.0
16.4
8.2
6.6
2.5
12.0
16.0
Q1
LM324ADR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM324ADR
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM324ADRG4
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM324ANSR
SO
NS
14
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
LM324APWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324APWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324APWRG4
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324DR
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM324DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM324DRG3
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
LM324DRG4
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM324KADR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM324KANSR
SO
NS
14
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
LM324KAPWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324KDR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
LM324KNSR
SO
NS
14
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
LM324KPWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324PWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324PWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324PWRG3
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
LM324PWRG4
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
29-Apr-2014
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM124DR
SOIC
D
14
2500
367.0
367.0
38.0
LM224ADR
SOIC
D
14
2500
333.2
345.9
28.6
LM224ADR
SOIC
D
14
2500
364.0
364.0
27.0
LM224ADRG4
SOIC
D
14
2500
367.0
367.0
38.0
LM224ADRG4
SOIC
D
14
2500
333.2
345.9
28.6
LM224DR
SOIC
D
14
2500
364.0
364.0
27.0
LM224DR
SOIC
D
14
2500
367.0
367.0
38.0
LM224DRG3
SOIC
D
14
2500
364.0
364.0
27.0
LM224KADR
SOIC
D
14
2500
367.0
367.0
38.0
LM224KDR
SOIC
D
14
2500
367.0
367.0
38.0
LM2902DR
SOIC
D
14
2500
364.0
364.0
27.0
LM2902DR
SOIC
D
14
2500
367.0
367.0
38.0
LM2902DR
SOIC
D
14
2500
333.2
345.9
28.6
LM2902DRG3
SOIC
D
14
2500
364.0
364.0
27.0
LM2902DRG4
SOIC
D
14
2500
333.2
345.9
28.6
LM2902KAVQPWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM2902KAVQPWRG4
TSSOP
PW
14
2000
367.0
367.0
35.0
LM2902KDR
SOIC
D
14
2500
367.0
367.0
38.0
LM2902KNSR
SO
NS
14
2000
367.0
367.0
38.0
LM2902KPWR
TSSOP
PW
14
2000
367.0
367.0
35.0
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
29-Apr-2014
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM2902KVQPWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM2902KVQPWRG4
TSSOP
PW
14
2000
367.0
367.0
35.0
LM2902NSR
SO
NS
14
2000
367.0
367.0
38.0
LM2902PWR
TSSOP
PW
14
2000
364.0
364.0
27.0
LM2902PWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM2902PWRG3
TSSOP
PW
14
2000
364.0
364.0
27.0
LM2902PWRG4
TSSOP
PW
14
2000
367.0
367.0
35.0
LM324ADBR
SSOP
DB
14
2000
367.0
367.0
38.0
LM324ADR
SOIC
D
14
2500
367.0
367.0
38.0
LM324ADR
SOIC
D
14
2500
364.0
364.0
27.0
LM324ADRG4
SOIC
D
14
2500
367.0
367.0
38.0
LM324ANSR
SO
NS
14
2000
367.0
367.0
38.0
LM324APWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM324APWR
TSSOP
PW
14
2000
364.0
364.0
27.0
LM324APWRG4
TSSOP
PW
14
2000
367.0
367.0
35.0
LM324DR
SOIC
D
14
2500
364.0
364.0
27.0
LM324DR
SOIC
D
14
2500
333.2
345.9
28.6
LM324DRG3
SOIC
D
14
2500
364.0
364.0
27.0
LM324DRG4
SOIC
D
14
2500
333.2
345.9
28.6
LM324KADR
SOIC
D
14
2500
367.0
367.0
38.0
LM324KANSR
SO
NS
14
2000
367.0
367.0
38.0
LM324KAPWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM324KDR
SOIC
D
14
2500
367.0
367.0
38.0
LM324KNSR
SO
NS
14
2000
367.0
367.0
38.0
LM324KPWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM324PWR
TSSOP
PW
14
2000
364.0
364.0
27.0
LM324PWR
TSSOP
PW
14
2000
367.0
367.0
35.0
LM324PWRG3
TSSOP
PW
14
2000
364.0
364.0
27.0
LM324PWRG4
TSSOP
PW
14
2000
367.0
367.0
35.0
Pack Materials-Page 4
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement