EarthQuake RCS-800 User`s manual

Add to my manuals
12 Pages

advertisement

EarthQuake RCS-800 User`s manual | Manualzz
Reference Ceiling Speakers
Model:
RCS-650
RCS-800
User’s Manual
RCS-650
RCS-800
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
Introduction
Congratulations on your choice of RCS Series In-Ceiling Speaker systems, one
of Earthquake’s most valued in-ceiling speaker lines. With the proper installation
and operation RCS speakers will provide a life a time of durability and high-end
performance.
It is important that you follow all installation and mounting instructions and
recommendations in this manual closely and carefully to insure optimal performance
operation and longevity.
Features
• 1 inch silk dome swivel NEO tweeter
• Bumped back basket and T-yoke for high speaker excursion
• Wider surround for deeper bass and higher speaker excursion
• 12dB/octave filter network crossover
• Thermal tweeter protection
• Custom compact spring loaded terminals
• Easy to use Turn ‘N’ Lock installation mechanism
• 20% smaller footprint than competitors
• Tight, small lip for better aesthetic
• Paintable rust-resistant grille
The Sound That Will Move You.
Earthquake Sound Corporation
2727 McCone Avenue
Hayward, CA 94545
Tel: 510-732-1000
Fax: 510-732-1095
Customer Support
[email protected]
Tel: 800-576-7944
Fax: 510-732-1095
© 2011 Earthquake Sound Corporation. All rights reserved.
This document should not be construed as a commitment on the part of Earthquake
Sound Corporation. The information is subject to change without notice. Earthquake
Sound Corporation assumes no responsibility for errors that may appear within
this document.
RCS In-Ceiling Manual
Earthquake Sound Corp. | www.earthquakesound.com
Safety Instructions
1) Read these instructions in their entirety.
2) Store this manual and packaging in a safe place.
3) Heed all warnings.
4) Follow instructions (do not take short cuts).
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatuses that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plus has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the pint where they exit from the
apparatus.
11) Only use attachments & accessories specified by the manufacturer.
12) Use only compatible rack or cart for final resting position.
13) Unplug this apparatus during lightening storm or when unused for a long
period of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in anyway, such as: powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
Specifications are subject to change without notice
RCS In-Ceiling Manual
Unpacking System Components
• Keep the original carton and packing materials for future shipment or
storage.
• Check for any visual signs of damage. If you encounter any concealed
damage, consult your Earthquake Sound dealer before proceeding with unit
installation.
• Retain the sales receipt as it establishes the duration of the limited warranty
and provides information for insurance purposes.
System Installation Considerations
There are several factors to consider before installing Earthquake Sound’s
RCS In-Ceiling Speakers.
• What are the intended listening zones?
• What system options and accessories might be required for features such
as local sources, etc.?
• From where in each zone will the listener prefer to control the system? Where
will the remote gains be located? Where will the speakers be located?
• Where will the source equipment be located?
Connection Tips
• Keep all power cords away from all signal cables to prevent humming from
induced noise.
• Choose reliable signal cable cords (Earthquake Sound also specializes in
high-performance RCA cables and patches).
• All speaker wires that are ran through the walls should be twisted to reduce
potential hum noise pick up.
• Label both ends of all wires with the corresponding room location.
• It is best to use a grounded electrical outlet to power the amplifier. Lack of
input ground reference could be unsafe. Consult your electrical contractor
about proper grounding.
RCS In-Ceiling Manual
Earthquake Sound Corp. | www.earthquakesound.com
Painting Guidelines
RCS in-ceiling speakers are paintable and can accept virtually any type of
paint. Spray and roller paint applications typically provide the best results.
When you are ready to begin painting remember to shield the driver and
tweeter from the paint. Be sure to remove the inner grille cloth before painting.
Replace it once the paint has completely dried.
Speaker Placement
RCS in-ceiling speakers are designed to be flush mounted in walls or ceilings.
To optimize their acoustics you should follow these simple guidelines:
For best stereo reproduction the speakers should be placed an equal distance
from your listening position and separated so that the angle between them is
between 40 and sixty degrees. The units should be placed with the tweeters
angled toward the ear level of the seated listener.
Specifications are subject to change without notice
RCS In-Ceiling Manual
Easy Installation
1
Cut the hole using
the provided cut out
template
2
Wire the speaker
using the nonobtrusive springloaded terminals
3
Mount the speaker
by utilizing the TurnN-Lock installation
mechanisms
RCS In-Ceiling Manual
Earthquake Sound Corp. | www.earthquakesound.com
RCS-650 Specifications
Woofer Size:
6-1/2” (165mm)
Woofer Material:
Polypropylene
Tweeter Size:
1” (25mm)
Tweeter Material:
silk dome/NEO magnet
Power Handling RMS:
5 - 80W
Power Handling Max:
160W
Frequency Response:
45Hz - 20kHz
Sensitivity:
92dB
Impedance:
8-ohm
Crossover:
12dB/octave filter network with polyswitch
Finish:
White/Paintable
Weight:
2.48 lbs (1.12kg)
8” (203.8mm)
6-3/4” (172mm)
3” (77mm)
3-1/8” (80mm)
7” (177mm)
Frame Diameter:
8” (203.8mm)
Grille Diameter:
6-3/4” (172mm)
Cut-out Hole Diameter:
7” (177mm)
Mounting Depth:
3” (77mm)
Magnet Diameter:
3-1/8” (80mm)
Specifications are subject to change without notice
RCS In-Ceiling Manual
RCS-800 Specifications
Woofer Size:
8” (203mm)
Woofer Material:
Polypropylene
Tweeter Size:
1” (25mm)
Tweeter Material:
silk dome/NEO magnet
Power Handling RMS:
10 - 100W
Power Handling Max:
200W
Frequency Response:
45Hz - 20kHz
Sensitivity:
92dB
Impedance:
8-ohm
Crossover:
12dB/octave filter network with polyswitch
Finish:
White/Paintable
Weight:
3.04 lbs (1.38kg)
9-5/8” (245mm)
8-3/8” (213mm)
3-7/8”
(98mm)
3-5/16” (85mm)
8-9/16” (217mm)
Frame Diameter:
9-5/8” (245mm)
Grille Diameter:
8-3/8” (213mm)
Cut-out Hole Diameter:
8-9/16” (217mm)
Mounting Depth:
3-7/8” (98mm)
Magnet Diameter:
3-5/16” (85mm)
RCS In-Ceiling Manual
Earthquake Sound Corp. | www.earthquakesound.com
Matching Products
For more involved projects requiring multiple pairs of Earthquake In-Ceiling
Speakers, use the Cinénova IR16. This 16 channel, 8 zone amplifier is the
best multi-room amplifier on the market. It can output 100 watt RMS with a
bridged 8-ohm set up and 150 watt RMS with a 4-ohm configuration.
Cinénova IR16 also comes with 8 IR remote controls, 8 keypads, and 4 remote
eyes for ultimate multi-room control.
Recommended Configuration
50W RMS per channel (8-ohm stereo with all channels driven)
Specifications are subject to change without notice
RCS In-Ceiling Manual
10 Year Limited Warranty
RCS In-Ceiling (10) year limited warranty:
Earthquake warrants the original purchaser that the speaker or amplifier
(product) is free from defects in material and workmanship, under normal
and proper use, for a period of ten (10) years from the date of purchase (as
shown on the original bill of sale with serial number affixed/written on it). The
ten (10) year warranty period is valid only if the product is properly installed
by an Earthquake authorized party, and the warranty registration card is
properly filled out and sent to Earthquake Sound Corporation. If the product
is installed by a non-authorized dealer, a thirty (30) day warranty period
applies.
(A) Ten (10) year limited warranty guidelines: (If installed by an authorized
Earthquake dealer)
First year: Earthquake pays for labor, parts, and ground freight
(only in US mainland) back to customer.
Second to Tenth year: Earthquake pays only for labor. Customer
must pay for parts and freight both ways.
(B) Warning:
• Products (sent for repair) that are tested by Earthquake
technicians and deemed to have no problem, will not be covered
by the limited warranty. Customer will be charged a minimum of
one (1) hour of labor (ongoing rates) plus shipping charges back
to customer.
• Each product sent for repair must be packaged in its original
packaging. Otherwise, there will be repackaging charge in
addition to labor, parts and shipping charges.
(C) Earthquake agrees to repair or replace - at our option - all such defective
products/parts subject to the following provisions:
• Defective products/parts have not been altered or repaired by
other than an Earthquake factory approved technician.
• Products/parts are not subjected to negligence, misuse, improper
use, or accident, damaged by improper line voltage, used with
incompatible products, or have its serial number or any part of it
altered, defaced or removed, or have been used in any way that is
contrary to Earthquake’s written instructions.
(D) Warranty Limitations:
Earthquake warranty does not cover products that have been modified or
abused. Including but not limited to the following:
• Damages to speaker cabinet and cabinet finish due to misuse,
abuse, or use of improper use of cleaning materials/methods.
• Bent speaker frame, broken speaker connectors, holes in speaker
cone, surround & dust cap, burnt speaker voice coil.
10
RCS In-Ceiling Manual
Earthquake Sound Corp. | www.earthquakesound.com
10 Year Limited Warranty (cont.)
• Fading, deterioration of speaker components & finish due to
improper exposure to elements.
• Bent amplifier casing, damaged finish on the casing due to abuse,
misuse, or improper use of cleaning material.
• Burnt tracers on PCB.
• Product/part damaged due to poor packaging or abusive shipping
conditions.
• Subsequent damage to other products.
A warranty claim will not be valid if the warranty registration card is not
properly filled & returned to Earthquake with a copy of the purchase receipt.
(E) Service Request:
To receive product(s) service, contact Earthquake service department
at (510) 732-1000 and request an RMA number (Return Material
Authorization), items shipped without a valid RMA number will be refused.
Make sure you provide us with your complete/correct shipping address,
a valid phone number, and a brief description of the problem you are
experiencing with the product. In most cases, our technicians might be able
to resolve the problem over the phone, thus eliminating the need to ship the
product.
(F) Shipping Instructions:
Product(s) must be packaged in its original protective box(es) to minimize
transport damage and avoid repackaging charges. Shipper claims regarding
items damaged in transit must be presented to carrier. Earthquake Sound
Corporation reserves the right to refuse products that are improperly
packaged. A copy of the purchase receipt must accompany product returned
for service. We encourage you to include with the package a written
description of the problem. Ship product to:
Earthquake Sound Corp.
2727 McCone Avenue
Hayward, CA 94545
Ph (510) 732-1000
You are responsible for the cost of shipping the product to Earthquake
Sound Corporation.
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting
from the one (1) year limited warranty policy must be resolved according to
the laws & regulations of the county of Alameda, California.
Specifications are subject to change without notice
RCS In-Ceiling Manual
11
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the
specifications without notice.
© Copyright Earthquake Sound Corporation
Earthquake Sound Corporation
2727 McCone Avenue, Hayward CA, 94545
Phone: (510) 732-1000 Fax: (510) 732-1095

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement