BLF578 1. Product profile Power LDMOS transistor 1.1 General description

BLF578 1. Product profile Power LDMOS transistor 1.1 General description
BLF578
Power LDMOS transistor
Rev. 3 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
A 1200 W LDMOS power transistor for broadcast applications and industrial applications
in the HF to 500 MHz band.
Table 1.
Application information
Mode of operation
f
VDS
PL
Gp
D
(MHz)
(V)
(W)
(dB)
(%)
CW
108
50
1000
26
75
pulsed RF
225
50
1200
24
71
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features
 Typical pulsed performance at frequency of 225 MHz, a supply voltage of 50 V and an
IDq of 40 mA, a tp of 100 s with  of 20 %:
 Output power = 1200 W
 Power gain = 24 dB
 Efficiency = 71 %
 Easy power control
 Integrated ESD protection
 Excellent ruggedness
 High efficiency
 Excellent thermal stability
 Designed for broadband operation (10 MHz to 500 MHz)
 Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 Industrial, scientific and medical applications
 Broadcast transmitter applications
BLF578
Power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
drain1
2
drain2
3
gate1
4
gate2
5
Simplified outline
1
Graphic symbol
2
1
5
3
3
4
5
4
[1]
source
2
sym117
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
BLF578
Package
Name
Description
Version
-
flanged balanced LDMOST ceramic package;
2 mounting holes; 4 leads
SOT539A
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
BLF578#3
Product data sheet
Symbol
Parameter
VDS
Conditions
Min
Max
Unit
drain-source voltage
-
110
V
VGS
gate-source voltage
0.5
+11
V
ID
drain current
-
88
A
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
225
C
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 14
BLF578
Power LDMOS transistor
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Rth(j-c)
Zth(j-c)
Parameter
Conditions
thermal resistance from junction to case
Tj = 150 C
transient thermal impedance from junction to case
Tj = 150 C; tp = 100 s;  = 20 %
[1]
Tj is the junction temperature.
[2]
Rth(j-c) is measured under RF conditions.
[3]
See Figure 1.
Typ
Unit
[1][2]
0.14
K/W
[3]
0.04
K/W
001aak924
0.18
Zth(j-c)
(K/W)
(7)
0.12
(6)
0.06
(5)
(3)
(4)
(2)
(1)
0
10−7
10−6
10−5
10−4
10−3
10−2
10−1
1
10
tp (s)
(1)  = 1 %
(2)  = 2 %
(3)  = 5 %
(4)  = 10 %
(5)  = 20 %
(6)  = 50 %
(7)  = 100 % (DC)
Fig 1.
Transient thermal impedance from junction to case as function of pulse duration
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C; per section unless otherwise specified.
BLF578#3
Product data sheet
Symbol Parameter
Conditions
Min
Typ
Max
Unit
V(BR)DSS drain-source breakdown
voltage
VGS = 0 V; ID = 2.5 mA
110
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 500 mA
1.25
1.7
2.25
V
VGSq
gate-source quiescent voltage
VDS = 50 V; ID = 20 mA
0.8
1.3
1.8
V
IDSS
drain leakage current
VGS = 0 V; VDS = 50 V
-
-
2.8
A
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 14
BLF578
Power LDMOS transistor
Table 6.
DC characteristics …continued
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
58
70
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
280
nA
RDS(on)
drain-source on-state
resistance
VGS = VGS(th) + 3.75 V;
ID = 16.66 A
-
0.07
-

Crs
feedback capacitance
VGS = 0 V; VDS = 50 V;
f = 1 MHz
-
3
-
pF
Ciss
input capacitance
VGS = 0 V; VDS = 50 V;
f = 1 MHz
-
403
-
pF
Coss
output capacitance
VGS = 0 V; VDS = 50 V;
f = 1 MHz
-
138
-
pF
Table 7.
RF characteristics
Mode of operation: pulsed RF; tp = 100 s;  = 20 %; f = 225 MHz; RF performance at VDS = 50 V;
IDq = 40 mA; Tcase = 25 C; unless otherwise specified; in a class-AB production test circuit.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL = 1200 W
23
24
25.4
dB
RLin
input return loss
PL = 1200 W
14
17.5
-
dB
D
drain efficiency
PL = 1200 W
68
71
-
%
001aaj113
900
Coss
(pF)
750
600
450
300
150
0
0
10
20
30
40
50
VDS (V)
VGS = 0 V; f = 1 MHz.
Fig 2.
Output capacitance as a function of drain-source voltage; typical values per
section
6.1 Ruggedness in class-AB operation
The BLF578 is capable of withstanding a load mismatch corresponding to VSWR = 13 : 1
through all phases under the following conditions: VDS = 50 V; IDq = 40 mA; PL = 1200 W
pulsed; f = 225 MHz.
BLF578#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 14
BLF578
Power LDMOS transistor
7. Application information
7.1 Reliability
001aaj114
105
Years
(1) (2) (3) (4) (5) (6)
104
103
102
(7) (8) (9) (10) (11)
10
1
0
4
8
12
16
20
Idc (A)
TTF (0.1 % failure fraction).
The reliability at pulsed conditions can be calculated as follows: TTF (0.1 %)  1/ .
(1) Tj = 100 C
(2) Tj = 110 C
(3) Tj = 120 C
(4) Tj = 130 C
(5) Tj = 140 C
(6) Tj = 150 C
(7) Tj = 160 C
(8) Tj = 170 C
(9) Tj = 180 C
(10) Tj = 190 C
(11) Tj = 200 C
Fig 3.
BLF578#3
Product data sheet
BLF578 electromigration (ID, total device)
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 14
BLF578
Power LDMOS transistor
8. Test information
8.1 Impedance information
Table 8.
Typical impedance
Simulated ZS and ZL test circuit impedances.
f
ZS
ZL
MHz


225
3.2 + j2.6
3.7  j0.2
drain
ZL
gate
ZS
001aaf059
Fig 4.
Definition of transistor impedance
8.2 RF performance
The following figures are measured in a class-AB production test circuit.
8.2.1 1-Tone CW pulsed
001aak926
26
Gp
(dB)
80
ηD
(%)
Gp
ideal PL
60
24
001aak927
65
PL
(dBm)
64
63
(2)
ηD
62
(1)
40
22
61
60
20
20
PL
59
18
100
400
700
1000
58
0
1300
1600
PL (W)
34
36
38
40
Ps (dBm)
VDS = 50 V; IDq = 40 mA; f = 225 MHz; tp = 100 s;
 = 20 %.
VDS = 50 V; IDq = 40 mA; f = 225 MHz; tp = 100 s;
 = 20 %.
(1) PL(1dB) = 61.0 dBm (1260 W)
(2) PL(3dB) = 61.4 dBm (1400 W)
Fig 5.
Power gain and drain efficiency as function of
load power; typical values
BLF578#3
Product data sheet
Fig 6.
Load Power as function of source power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 14
BLF578
Power LDMOS transistor
001aak928
26
001aak929
80
ηD
(%)
Gp
(dB)
24
60
(1)
(2)
(3)
(4)
(4)
(3)
(2)
(1)
22
40
20
20
18
100
400
700
1000
0
100
1300
1600
PL (W)
VDS = 50 V; f = 225 MHz; tp = 100 s;  = 20 %.
400
700
(1) IDq = 0 mA
(2) IDq = 40 mA
(2) IDq = 40 mA
(3) IDq = 80 mA
(3) IDq = 80 mA
(4) IDq = 160 mA
(4) IDq = 160 mA
Power gain as a function of load power;
typical values
001aak931
26
Fig 8.
Drain efficiency as a function of load power;
typical values
001aak933
80
(1)
ηD
(%)
Gp
(dB)
24
60
22
40
(4)
(3)
1300
1600
PL (W)
VDS = 50 V; f = 225 MHz; tp = 100 s;  = 20 %.
(1) IDq = 0 mA
Fig 7.
1000
(2)
(3)
(4)
(5)
(5)
(2)
20
20
(1)
18
100
400
700
1000
1300
1600
PL (W)
IDq = 40 mA; f = 225 MHz; tp = 100 s;  = 20 %.
0
100
400
(1) VDS = 30 V
(2) VDS = 35 V
(2) VDS = 35 V
(3) VDS = 40 V
(3) VDS = 40 V
(4) VDS = 45 V
(4) VDS = 45 V
(5) VDS = 50 V
(5) VDS = 50 V
Power gain as a function of load power;
typical values
BLF578#3
Product data sheet
1000
1300
1600
PL (W)
IDq = 40 mA; f = 225 MHz; tp = 100 s;  = 20 %.
(1) VDS = 30 V
Fig 9.
700
Fig 10. Drain efficiency as a function of load power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 14
BLF578
Power LDMOS transistor
8.3 Test circuit
VDD
VGG
C25
C1
C11
C28
C2
R3
R1
R5
T2
L1
C13
input
50 Ω
C7
C5
L3
C9
L4
L6
L8
L5
L7
L9
L10
C17 C19
L11
C16 C18 C20
output
50 Ω
C21
C24
L12
C14
C10
C8
C6
C22
C23
C15
T1
R2
R6
R4
L2
C27
C3
C12
C26
C4
VDD
VGG
001aaj123
See Table 9 for a list of components.
Fig 11. Class-AB common-source production test circuit
C25
C11
T2
C1
C2
R1
R3
C7
C5
C6
C17 C19
C23
C10
C8
R4
C15
R2
C3
C4
C21
C13
C14
C9
C28
L1
R5
T1
C24
C16 C18 C20
C22
R6
L2
C27
C12
C26
001aaj124
See Table 9 for a list of components.
Fig 12. Component layout for class-AB production test circuit
BLF578#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 14
BLF578
Power LDMOS transistor
Table 9.
List of components
For production test circuit, see Figure 11 and Figure 12.
Printed-Circuit Board (PCB): Rogers 5880; r = 2.2 F/m; height = 0.79 mm; Cu (top/bottom metallization);
thickness copper plating = 35 m.
Component
Description
Value
Remarks
C1, C2, C11, C12
multilayer ceramic chip capacitor
4.7 F
TDK4532X7R1E475Mt020U
C2, C3, C27, C28
multilayer ceramic chip capacitor
100 nF
C5, C7, C8, C21, C22
multilayer ceramic chip capacitor
1 nF
[1]
Murata X7R 250 V
C6
multilayer ceramic chip capacitor
30 pF
[1]
C9, C10, C13, C15
multilayer ceramic chip capacitor
62 pF
[1]
C14
multilayer ceramic chip capacitor
36 pF
[1]
C16, C17
multilayer ceramic chip capacitor
24 pF
[1]
C18
multilayer ceramic chip capacitor
30 pF
[1]
C19
multilayer ceramic chip capacitor
27 pF
[1]
C20
multilayer ceramic chip capacitor
9.1 pF
[1]
C23
multilayer ceramic chip capacitor
13 pF
[1]
C24
multilayer ceramic chip capacitor
16 pF
[1]
C25, C26
electrolytic capacitor
220 F; 63 V
L1, L2
3 turns 1 mm copper wire
D = 2 mm; length = 3 mm
L3, L12
stripline
-
(L  W) 15 mm  2.4 mm
L4, L5, L10, L11
stripline
-
(L  W) 47 mm  10 mm
L6, L7, L8, L9
stripline
-
(L  W) 8 mm  15 mm
R1, R2
metal film resistor
2 ; 0.6 W
R3, R4
metal film resistor
20 ; 0.6 W
R5, R6
metal film resistor
1 ; 0.6 W
T1, T2
semi rigid coax
50 ; 58 mm
[1]
EZ-141-AL-TP-M17
American Technical Ceramics type 100B or capacitor of same quality.
BLF578#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 14
BLF578
Power LDMOS transistor
9. Package outline
Flanged balanced ceramic package; 2 mounting holes; 4 leads
SOT539A
D
A
F
D1
U1
B
q
C
w2 M C M
H1
1
c
2
E1
p
H U2
5
L
3
A
E
w1 M A M B M
4
w3 M
b
Q
e
0
5
10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT
A
mm
4.7
4.2
inches
b
c
D
D1
e
E
E1
11.81 0.18 31.55 31.52
9.50
13.72
11.56 0.10 30.94 30.96
9.30
9.53
9.27
F
H
H1
L
1.75 17.12 25.53 3.48
1.50 16.10 25.27 2.97
p
Q
q
U1
3.30
3.05
2.26
2.01
35.56
U2
w1
41.28 10.29
0.25
41.02 10.03
w2
w3
0.51
0.25
0.374 0.375 0.069 0.674 1.005 0.137 0.130 0.089
0.185 0.465 0.007 1.242 1.241
1.625 0.405
1.400
0.010 0.020 0.010
0.540
0.366 0.365 0.059 0.634 0.995 0.117 0.120 0.079
0.165 0.455 0.004 1.218 1.219
1.615 0.395
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. recommended screw pitch dimension of 1.52 inch (38.6 mm) based on M3 screw.
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
EIAJ
EUROPEAN
PROJECTION
ISSUE DATE
10-02-02
12-05-02
SOT539A
Fig 13. Package outline SOT539A
BLF578#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 14
BLF578
Power LDMOS transistor
10. Abbreviations
Table 10.
Abbreviations
Acronym
Description
CW
Continuous Wave
EDGE
Enhanced Data rates for GSM Evolution
GSM
Global System for Mobile communications
HF
High Frequency
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
LDMOST
Laterally Diffused Metal-Oxide Semiconductor Transistor
RF
Radio Frequency
TTF
Time To Failure
VSWR
Voltage Standing-Wave Ratio
11. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLF578#3
20150901
Product data sheet
-
BLF578_2
Modifications:
•
The format of this document has been redesigned to comply with the new identity
guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLF578_2
20100204
Product data sheet
-
BLF578_1
BLF578_1
20081211
Objective data sheet
-
-
BLF578#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 14
BLF578
Power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLF578#3
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
12 of 14
BLF578
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.

Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
13. Contact information
For more information, please visit:
http://www.ampleon.com
BLF578#3
Product data sheet
For sales office addresses, please visit:
http://www.ampleon.com/sales
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
13 of 14
BLF578
Power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
6.1
7
7.1
8
8.1
8.2
8.2.1
8.3
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 4
Application information. . . . . . . . . . . . . . . . . . . 5
Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 6
Impedance information . . . . . . . . . . . . . . . . . . . 6
RF performance . . . . . . . . . . . . . . . . . . . . . . . . 6
1-Tone CW pulsed . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF578#3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement