Software Product Description ~D~DDmD PDP-11 COBOL,
~D~DDmD Software Product Description PRODUCT NAME: PDP-11 COBOL, Version 4.1 DESCRIPTION: COBOL is a precise, well-defined language for business data processing. The PDP-11 COBOL compiler is based on the specifications published by the American National Standards Institute (ANSI) in the document "American National Standard COBOL," X3.23-1974. PDP-11 COBOL operates under the control of the RSX-11 M, RSX-11 M-PLUS, RSTS/E, CTS-500, or lAS operating system. PDP-11 COBOL is properly defined as a subset of full ANS COBOL and meets the ANS-74 low-level specifications with the following additions (+)and omissions (- ): + Full Level 2 Nucleus Module + Full Level 2 Table Handling Module + Full Level 2 Sequential I/O Module + Full Level 2 Relative I/O Module + Full Level 2 Indexed I/O Module + Full Level 2 Segmentation Module + Full Level 1 Library Module, with partial Level 2 REPLACING facility + Full Level 1 Interprogram Communication Module + Cross Reference Compilation Listjng + DISPLAY with NO ADVANCING - RERUN option in I/O-CONTROL paragraph not implemented The PDP-11 COBOL language processor is composed of a compiler and an Object Time System/Library. The PDP-11 COBOL compiler produces an object module from a source program. The compiler checks each program line for syntax errors and returns an appropriate message if an error is found. The user can then correct the program (if necessary) and compile it. Program compilations result in an object module that can be linked and executed at the operating system command level. PDP-11 COBOL allows the user to write subprograms in both COBOL or in MACRO-11 assembly language. These subprograms are accessed with the CALL statement. June 1980 SPD 12.40.13 PDP-11 COBOL file I/O operations are controlled through the RMS data management software. This method of Record I/O supports sequential, relative, and indexed file organizations. Note that the indexed file support may require, depending on the operating system, the optional RMS-11 K software. PDP-11 COBOL also includes: • An interactive debugger that allows a user to set and remove breakpoints and examine and change program variables • Support for the Commercial Instruction Set (CIS) • CBLMRG, that merges Overlay Descriptor Language ~ (OOLT-files generated by COBOL compilations into a Single ODL file • RFRMT, that converts PDP-11 terminal format COBOL programs into conventional ANS COBOL program format MINIMUM HARDWARE REQUIRED: One of the following operating system configurations: • An lAS operating system configuration • An RSX-11 M or RSX-11 M-PLUS operating system configuration that includes the extended instruction set. If the system device is an RK05 disk, one additional RK05 disk drive beyond the system minimum configuration is required. This is a total of three RK05 disk drives on an RK05-only configuration. • A RSTS/E or CTS-500 operating system configuration that includes the following: At least 248K bytes of memory At least 10 million bytes of on-line disk storage Any configuration must include the following: • A user area of at least 56K bytes of memory • At least 3000 free blocks of on-line disk storage on the public disk structure OPTIONAL HARDWARE: Supports any mass storage, unit record or terminal device supported by the prerequisite software except TU56 DECtape and TU58 DECtape II. AE-3417M-TC SPO 12.40.13 PDP-11 COBOL, Version 4.1 -2- PREREQUISITE SOFTWARE: One of the following operating systems that includes RMS-11: • RSTS/E, Version 7.0 or, CTS-500, Version 5.0 (includes RMS-11 K, Version 1.B multikey ISAM support) ORSX-11 M, Version 3.2 • RSX-11 M-PLUS, Version 1.0 (includes RMS-11 K, Version 1.8 multikey ISAM support) • lAS, Version 3.0 The following key (0, E, H, M, Q, T, V, Z) represents the distribution media for the product and must be specified at the end of the order number, e.g., QP011-AD = binaries on 9-track BOO BPI Magtape (NAZI). D 9-track BOO BPI Magtape (NRZI) E = RK05 Disk Cartridge H = RL02 Disk Cartridge M = 9-track 1600 BPI Magtape (PE) Q RL01 Disk Cartridge T RK06 Disk Cartridge V RK07 Disk Cartridge Z No hardware dependency OPTIONAL SOFTWARE: • RMS-11 K, Version 1.B for multikey ISAM support (RSX-11 M or lAS systems only) For RSTSIE and CTS-500 Systems QP011 -A- Single-use license, binaries, documentation, support services (media; 0, E, H, M, Q, T, V) QP011 -C- Single-use license, binaries, documentation, no support services (media: 0, E, H, M, Q, T, V) QP011 -D- Single-use license only,·no binaries, no documentation, no support services (media: Z) • SORT-11, Version 2.0 (RSX-11 M, RSX-11 M-PLUS, or lAS systems only) TRAINING CREDITS: None SUPPORT CATEGORY: DIGITAL SUPPORTED PDP-11 COBOL is a DIGITAL Supported Software Product. SOFTWARE INSTALLATION: DIGITAL INSTALLED DIGITAL installation is required for Software Product Support. There is no charge for installation if performed at the time of system installation. DIGITAL installed software products, except for operating systems, are subject to an add-on installation fee when purchased subsequent to system installation. For RSX-11M and RSX-11M-PLUS Systems QP012 -A- Single-use license, binaries, documentation, support services (media: 0, E, H, M, Q, T, V) QP012 -C- Single-use license, binaries, documentation, no support services (media: 0, E, H, M, Q, T, V) QP012 -0- Single-use license only, no binaries, no documentation, no support services (media: Z) SOFTWARE PRODUCT SUPPORT PDP-11 COBOL includes standard warranty services as defined in the Software Support Categories Addendum of this SPD. For lAS Systems QP013 -A- Single-use license, binaries, documentation, support services (media: 0, E, M, Q, QP013 -C- Single-use license, binaries, documentation, no support services, (media: 0, E, M, Q, T) QP013 -0- Single-use license only, no binaries, no documentation, no support services (media: Z) ORDERING INFORMATION: All binary licensed software, including any subsequent updates, is furnished under the licensing provisions of DIGITAL's Standard Terms and Conditions of Sale, wh ich provide in part that the software and any part thereof may be used on only the single CPU on which the software is first installed, and may be copied, in whole or in part (with the proper inclusion of the DIGITAL copyright notice and any DIGITAL proprietary notices on the software) only for use on such CPU. All source licensed software is furnished only under the terms and conditions of a separate Software Program Sources License Agreement between Purchaser and DIGITAl. Options with no support services are only available after the purchase of one supported license. A single-use license only option is a licenseto copy the software previously obtained under license. T) Update Options Users of PDP-11 COBOL whose specified Support Category warranty has expired can order under license the following software update at the then current charge for such update. The update is distributed in binary form on the appropriate medium and includes no installation or other services unless specifically stated. SPD 12.40.13 PDP-11 COBOL, Version 4.1 -3For RSTS/E and CTS-500 Systems Miscellaneous Options QP011 -H- Binaries, documentation (media; D, E, H, M,Q, T, V) For RS TS/ E and C TS-500 Systems QP011 -H- Right to copy for single-use (under existing license), no binaries, no documentation (media; Z) QP011 -G- Documentation only kit (media: Z) For RSX-11M and RSX-11M-PLUS Systems QP012 -G- Documentation only kit (media: Z) For RSX-11M and RSX-11M-PLUS Systems For lAS Systems QP012 -H- Binaries, documentation (media: D, E, H, M, Q, T, V) QP013 QP012 -H- Right to copy for single-use (under existing license), no binaries, no documentation (media: Z) For lAS Systems QP013 -H- Binaries, documentation (media: D, E, M, Q, T) QP013 -H- Rightto copy for single-use (under existing license), no binaries, no documentation (media: Z) -G- Documentation only kit (media: Z) ADDITIONAL SERVICES: Post-warranty Software Product Services for this software product are available with the prerequisite being the purchase of the RSTS/E, RSX-11 M, RSX-11 MPLUS, or lAS Self-Maintenance Service for Software. Customers should contact their local DIGITAL office for additional information.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project