PS10-R2 Loudspeaker Data Sheet
25736 - PS Data Sheets:Layout 05/01/2010 14:16 Page 3
Data Sheet
PS10-R2
Key Features
• High-power system (132dB Peak SPL@1m)
with 10in LF and 1in HF drivers.
• Rotatable asymmetrical horn and unique
cabinet architecture ensure versatility.
• User-adaptable for both PA and stage
monitoring applications.
• Two-way passive 8Ω design uses a single
amplifier channel for simpler installation and
lower cost.
• Sophisticated control electronics ensure
reliable, linear operation.
• Supported with a full range of mounting and
flying accessories.
System Applications
• Touring, installed PA for clubs, A/V, theatre,
broadcast, Houses of Worship, etc. High-quality
stage monitoring for cabarets A/V, theatre,
broadcast, etc.
• Fill-in system for use with larger NEXO
PS/Alpha systems, or any application needing
exceptional side, down and near-field
augmentation.
Loudspeaker
A high power system capable of producing 132 dB
Peak SPL, the new PS10-R2 Loudspeaker can be
safely driven with up to 1250 Watts of amplifier
power. Controlled by the new, dedicated PS10
TDController-R2, or the NXAMP Powered Controller,
the PS10-R2 achieves high SPLs and wide bandwidth
performance, despite being only half the weight and
volume of common trapezoidal loudspeaker systems.
Along with the flexible coverage patterns enabled by
NEXO’s proprietary constant directivity asymmetrical
dispersion horn, the architecture and weight balance
of the PS10-R2 are designed to provide both
uncompromised PA and stage monitor performance
from a single speaker. Left and Right versions of the
PS10-R2 have been developed to provide a true
stereo image – particularly important for wedge
applications. The 2-way passive 8Ω design uses a
single amplifier channel to deliver bi-amped
performance, reducing system cost, size and
complexity, while the new cabinet design incorporates
a pole mount and a new hardware adapter compatible
with a vast array of touring and fixed installation
accessories.
PS10-R2 horizontal coverage, +25°
PS10-R2 horizontal coverage, 0°
PS10-R2 horizontal coverage, -25°
PS10-R2 response
25736 - PS Data Sheets:Layout 05/01/2010 14:16 Page 4
Specifications
PS10-R2
Loudspeaker
PS10-R2 LOUDSPEAKER PRODUCT FEATURES
Components
Height x Width x Depth
Weight
Connectors
Construction
Fittings
Front finish
Flying Points
Stand fittings
1 x 10" (25cm) Shielded Neodymium 8Ω driver.
HF 1 x 1" throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.
515mm x 316mm x 277 mm (20.28" x 12.44" x 10.91").
14 kg (31 lbs).
2 x NL4MP Speakon 4 pole.
Baltic Birch Ply finished with textured black coating.
2 Metal recessed pockets.
Moulded Dark Grey Metal Grill.
One plate connecting with external accessories.
Built in Steel Stand Fitting, (35mm / 1 3/8").
SYSTEM SPECIFICATIONS PS10-R2 with PS10 TDController-R2
Frequency Response [a]
Usable Range @-6dB [a]
Sensitivity 1W @ 1m [b]
Nominal Peak SPL @ 1m [b]
HF Dispersion [c]
Directivity Q & DI [c]
Crossover Frequencies
Nominal Impedance
Recommended Amplifiers
65 Hz - 20 kHz ±3dB.
58 Hz - 21 kHz.
99 dB SPL Nominal – 97 dB SPL Wideband.
129 to 132 dB Peak.
50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions.
Q : 16 Nominal DI : 12 dB Nominal.
( f > 3 kHz )
2 kHz Passive.
8Ω
500 to 1250 W / 8 Ω.
SYSTEM OPERATIONS
Electronic Controller
NEXO is one of the world’s leading sound
reinforcement loudspeaker manufacturers.
Founded in 1979, the company is dedicated to
crafting practical solutions with solid engineering.
Each new design begins with a proprietary
sophisticated computer simulation process that
allows every parameter to be extensively modeled
and simulated, leading to breakthrough cost and
performance gains. NEXO’s comprehensive
product line includes loudspeakers, analogue and
digital control electronics and amplification; all
designed to deliver consistent sound quality and
long term reliability for a broad range of
applications.
NEXO S.A.
Parc d’Activité
du Pré de la Dame Jeanne
B.P. 5
60128 PLAILLY
Tel: +33 (0) 3 44 99 00 70
Fax: +33 (0) 3 44 99 00 30
e-mail: info@nexo.fr
NEXO LatAM
C.C. No 33. Suc 49
Caballito (1449)
Buenos Aires
Argentina
Tel: +54 114 432 1911
Fax: +54 114 431 1007
e-mail: info@nexo.fr
NEXO Asia
GPO Box 806
Hong Kong
SAR China
Tel: +852 9096 3472
Fax: +852 2104 3214
e-mail: info@nexo.fr
Dispersion configuration
Sub-bass
Speaker Cables
The PS10 TDController-R2 is precisely matched to the PS10-R2 & LS600 cabinets and includes sophisticated
protection systems. Using PS10-R2 & LS600 without a properly connected PS10 TDController-R2 will result in
poor sound quality and can damage the components.
After dismounting front grill from its fixings, the HF Horn can be rotated in 4 positions for dispersion configuration.
The PS10-R2 can be used without optional LS600 Sub-Bass. Active two-way operation with the LS600 is
included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2, additional LS600 may be used for
enhanced LF capability.
PS10-R2 are wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are present
on both. Single identical cables can thus be used to loop through combinations of up to 2 x PS10-R2 & 1 x
LS600 in no particular order.
SHIPPING & ORDERING SPECIFICATIONS
Packaging
Shipping Weight & Volume
Accessories
PS10-R2 is packaged as a single product.
17.3 kg (38 lbs) / 0.169 cubic metres (5.96 cubic feet).
A full selection of mounting Accessories is available, please contact your Nexo Agent for details.
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
[a] Response curves & data : Anechoic Far Field for the PS10-R2 + PS10TDController-R2. Half-Space Anechoic radiation for the LS600 + PS10 TDController-R2.
[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise.
Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB range. Data are for speaker + processor + recommended amplifier combinations.
Peak SPL is at clipping of recommended amplifier.
[c] Directivity curves & data : obtained by computer treatment on off axis response curves.
E&OE September 2009.
Architectural and Engineering Specifications
The 2-way loudspeaker system shall have one 10 inch shielded Neodymium 8Ω cone transducer and a 1inch compression driver on a low distortion constant
directivity asymmetrical dispersion horn. The system's horizontal coverage shall range from 50° to 100°, with vertical coverage of +25° and -30°. The user shall
be able to rotate the horn in 4 directions as required by the application. The system shall have a Q of 16 and a Directivity Index that is 12 at frequencies above
3kHz. Nominal Sensitivity shall be 99dB (97dB wideband). When driven by a NXAMP 4x1, NXAMP 4x4 a PS10 TDController-R2 or by a NX242 properly-connected
to amplification capable of delivering 500 to 1250 Watts into an 8Ω (nominal) load the system shall be capable of 129dB to 132dB peak SPL, with a frequency
response of 65Hz to 20kHz ±3dB (58Hz to 21Hz -6dB). The system shall include an internal passive crossover. Electrical connections shall be made via one of
the two 4-pole NL4MP SPEAKON connectors.
The system shall have a tuned ported multi-angle enclosure constructed of 18ply Baltic birch, finished in either black or white textured coating and having
exterior dimensions no greater than 515mm H x 316mm W x 277mm D (20.28 inches H x 12.4 inches W x 10.9 inches D): the system shall weigh 14 kg
(31lbs). Exterior hardware shall include 1 metal plate, 2 attachment points and 1-pole socket. Interior components shall be protected by a powder coated
perforated steel grille. The system shall be the PS10-R2 with either, a PS10 TDController-R2, NXAMP 4x1, NXAMP 4x4 or NX242.
LIMITED WARRANTY
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately packaged and
dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO warranty does not cover
cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents, modifications or any type of misuse.
All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising