Acer | F165 Series | User`s guide | Acer F165 Series User`s guide

Acer Projector
P7505/F155/PF-807/P7605/F165/PFWU07/H9505BD/E255D/HE-822J/
P7305W/F125/PF-W07 Series
User's Guide
Downloaded From projector-manual.com Acer Manuals
Copyright © 2013. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 11/2013
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: _________________________________
Serial number: __________________________________
Date of purchase: _______________________________
Place of purchase: ______________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product
names or trademarks are used herein for identification purposes only and belong to their respective
companies.
"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."
Downloaded From projector-manual.com Acer Manuals
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
Downloaded From projector-manual.com Acer Manuals
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (15 feet) maximum length.
Downloaded From projector-manual.com Acer Manuals
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
Turn on the projector first and then signal sources
Do not place the product in following environments:
•
•
•
•
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
Downloaded From projector-manual.com Acer Manuals
vi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to turn off
before turning main power off.
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Downloaded From projector-manual.com Acer Manuals
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/index.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
“Lamp(s) contain Mercury,
Dispose Properly.”
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
Downloaded From projector-manual.com Acer Manuals
viii
First things first
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the unit provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the Onscreen display "Management"
menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Downloaded From projector-manual.com Acer Manuals
First things first
iii
viii
Usage Notes
viii
Precautions
viii
Introduction
1
Product Features
1
Package Overview
3
Projector Overview
4
Projector Outlook
4
Control Panel
6
Remote Control Layout
7
Getting Started
Connecting the Projector
Turning the Projector On/Off
9
9
11
Turning on the Projector
11
Turning the projector off
12
Adjusting the Projected Image
13
Adjusting the Height of Projected Image
13
How to optimize image size and distance
14
How to get a preferred image size by adjusting
distance and zoom
17
How to get a preferred image position by
adjusting lens shift
20
User Controls
23
Installation menu
23
Onscreen Display (OSD) Menus
25
Color
26
Image
28
Setting
30
Management
33
Audio
34
3D
35
Language
36
Downloaded From projector-manual.com Acer Manuals
Contents
Information for your safety and comfort
Appendices
Troubleshooting
37
37
LED & Alarm Definition Listing
41
Cleaning and replacing the dust filters
42
Replacing the Lamp
43
Ceiling Mount Installation
44
Specifications
47
Compatibility modes
50
Regulations and safety notices
Downloaded From projector-manual.com Acer Manuals
54
1
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•
DLP® technology
•
P7305W/F125/PF-W07 series: True 1280x800 WXGA resolution
P7505/F155/PF-807/H9505BD/E255D/HE-822J series: True 1920x1080 1080p
resolution
P7605/F165/PF-WU07 series: True 1920x1200 WUXGA resolution
Full/4:3/16:9/L.Box aspect ratio supported
•
Acer ColorBoost technology delivers nature’s true colors for vivid, life-like
images
•
Acer ColorSafe II technology ensures consistent color rendition over time
•
Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D
supported and Nvidia 3DTV Play Ready
•
Enrichs 3D experience for 2D contents via 2D to 3D convert function
•
High brightness and contrast ratio
•
Versatile display modes (Bright, Presentation, Standard, Video, Movie,
Dark Cinema, Game, Sports, User) enable optimum performance in any
situation
•
NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•
Side-sliding lamp design allows easy lamp replacement
•
Lower power consumption and economy (ECO) mode extends lamp life
•
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Equipped with HDMI™ connection supporting HDCP
•
Advanced digital keystone correction optimizes presentations
•
Smart detection delivers quick, intelligent source detection
•
Multi-language on screen display (OSD) menus
•
Full-function remote control
•
Manual focus projection lens zooms up to 1.5x
•
2x digital zoom and pan move function
Downloaded From projector-manual.com Acer Manuals
English
Introduction
English
2
•
Microsoft® Windows® 2000, XP, Vista®, Windows® 7, Windows® 8, OS
compliant
•
Manual lens shift adjustment
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
3
M
ZOO
LAMP
BACK
SOUR
CE
MEN
U
TEMP
ENTER
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap
Power cord
VGA cable
Composite video cable
Security card
User’s guide
Remote control
(option)
Quick start guide
2 x Batteries
(option)
Carrying case
USB WiFi adapter
(option)
Dust filter
(option)
User's guide
(for multi-media and
wireless functions)
Quick start guide
(for multi-media and
wireless functions)
MEDIA
SETUP
3D
3D
HOME
MEDIA
SETUP
INFO
Downloaded From projector-manual.com Acer Manuals
English
Package Overview
English
4
Projector Overview
Projector Outlook
Front / upper side
8
5
MP
LA
CK
BA
SO
UR
CE
M
EN
U
MP
TE
EN
R
TE
9
3
5
10
M
O
ZO
4
1
7
2
6
#
Description
#
Description
1
Lens cap
6
Elevator feet
2
Zoom lever
7
Tilt adjusting wheels
3
Zoom Lens
8
Control panel
4
Focus ring
9
Power button
5
Remote control receivers
10 Lens shift control rings
Downloaded From projector-manual.com Acer Manuals
5
2
3 4 5
6
7
8
VGA IN 1
HDMI 3
HDMI 2
9
VGA OUT
11 12 13 14
Y
VIDEO
Pb/Cb
Pr/Cr
AUDIO IN 1
AUDIO OUT
HDMI 1
S-VIDEO
USB A2
USB A1
10
English
Rear side
DC
FOR WIRELESS ADAPTER
1
#
VGA IN 2
RS232
15
16
Description
#
17
AUDIO IN 2 WIRED REMOTE
18 19
20
Description
1
Power socket
11
2
LAN (RJ45 Port for 10/100M Ethernet)
12
3
Mini USB Ctrl connector (for firmware
13
upgrade and USB display)
Audio output connector
4
USB A1 connector
14
12V DC output connector
5
USB A2 connector (supports USB
wireless adapter)
15
PC analog input connector (VGA IN 2)
6
HDMI 3 connector
16
RS232 connector
7
HDMI 1/HDMI 2 connector (supports
2D to 3D feature)
17
YPbPr/YCbCr input connector
18
Audio input 2 connector (Component/
Composite/S-Video)
19
Wired IR remote input connector
20
Kensington™ lock port
8
9
PC analog signal/HDTV/SCART/component video input connector (VGA IN 1)
Monitor loop-through output connec-
tor (for VGA IN 1 only)
10 S-Video input connector
Composite video input connector
Audio input 1 connector (VGA IN 1/VGA
IN 2)
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
6
Control Panel
6
1
SOURCE
7
2
3
8
BACK
ENTER
9
2
10
4
# Icon
5
Function
Description
1
LAMP
Lamp Indicator LED
2
KEYSTONE
Adjusts the image to compensate for distortion
caused by tilting the projector.
3
Back/Stop
Press "Back/Stop" to stop playing media file or go
back to upper data folder.
4
MENU
•
•
Press "MENU" to launch the Onscreen display
(OSD) menu, back to the previous step for the
OSD menu operation or exit the OSD menu.
Confirm your selection of items.
5
POWER
See the contents in "Turning the Projector On/
Off" section.
6
SOURCE
Press "SOURCE" to choose RGB, Component, SVideo, Composite, SCART, HDTV and HDMI™
sources.
7
TEMP
Temp Indicator LED
8
Four directional select keys
Use to
select items or make
adjustments to your selection.
9
Enter/Play/Pause
Press "Enter/Play/Pause" to play/pause media file.
10
IR Recevier
Remote control receiver.
Downloaded From projector-manual.com Acer Manuals
7
1
English
Remote Control Layout
2
3
MEDIA
SETUP
5
3D
8
4
6
7
9
32
8
3D
33
7
11
10
12
13
14
15
16
34
18
17
19
20
HOME
MEDIA
SETUP
6
17
21
22
25
27
29
31
#
Icon
INFO
Function
23
24
26
28
30
23
Description
1
Infrared
transmitter
Sends signals to the projector.
2
3
Laser pointer
POWER
Aim the remote at the viewing screen.
Please see "Turning the Projector On/Off" section.
4
HIDE
Temporarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
5
FREEZE
MEDIA_SETUP
SOURCE
3D
ZOOM
Back
Laser button
6
7
8
9
10
11
12
13
14
Pause the screen image.
Press "MEDIA SETUP"/"SETUP" to enter media OSD setting.
Changes the active source.
Press "3D" to select 3D models.
Zooms the projector display in or out.
Press "BACK" to go back one menu step.
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
Enter
Press "ENTER" to play media file.
Four directional Use up, down, left, right buttons to select items or make
select keys
adjustments to your selection.
KEYSTONE
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
Downloaded From projector-manual.com Acer Manuals
English
8
#
Icon
Function
15
MENU
16
18
MOUSE_Left/
Right Click
MOUSE_Four
directional select
keys
MODE
19
20
VOLUME +/PAGE
21
Prev
Next
Play/Pause
Description
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
17
22
Stop
VGA
23
24
25
S-VIDEO
INFO
COMPONENT
26
27
VIDEO
SD/USB A
28
29
USB B
HDMI™/DVI
30
LAN/WiFi
31
32
33
KeyPad 0~9
ASPECT RATIO
RESYNC
34
MEDIA_HOME
Confirm your selection of items.
Left-/right-click buttons are on the left and right,
respectively; the center button works as a multidirectional
pointer stick. To enable this function, an USB cable must be
connected to projector from your PC.
Press "MODE" to select the display mode.
Increases/decreases the volume.
For computer mode only. Use this button to select the next
or previous page. This function is only available when
connected to a computer via a USB cable.
Press "Prev" to go to previous index or page in file list view.
Press "Next" to go to next index or page in file list view.
Press "Play/Pause" to play/pause media file.
Press "Stop" to stop playing media file.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
To change source to S-Video.
Press "INFO" to display media information.
Press "COMPONENT" to change source to Component
video. This connection supports YPbPr (480p/576p/720p/
1080i) and YCbCr (480i/576i).
To change source to COMPOSITE VIDEO.
Press "SD/USB A" to change source to USB A. (no SD
function)
Press "USB B" to change source to USB B.
Press "HDMI™/DVI" to change source to HDMI™ (no DVI
function).
Press "LAN/WiFi" to display the image which is wire or
wirelessly transmitted from the PC to the projector via the
"Acer LAN webpage management" utility. (Acer Projector
Multimedia CD)
Press "0~9" to input a password in the "Security".
Choose the desired aspect ratio.
Automatically synchronizes the projector to the input
source.
Press "HOME" to return to the home page of media mode.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
9
English
Getting Started
Connecting the Projector
Internet
USB
S-Video Output
8
D-Sub
DVD player
Video Output
HDMI
D-Sub
5
2
3
5
4
6
Y
9
7
R W
HDMI
USB
HDMI 2
HDMI 3
USB A1
D-Sub
D-Sub
VGA IN 1
VGA OUT
Y
Y
VIDEO
Pb/Cb
Pr/Cr
B
G
AUDIO IN 1
AUDIO OUT
HDMI 1
S-VIDEO
USB A2
DC
14
FOR WIRELESS ADAPTER
HDTV adapter
RS232
10
AUDIO IN 2 WIRED REMOTE
RS232
VGA IN 2
R
13
R B G
1
USB
12
11
11
9
3D
HOME
RS232
15
#
1
R B G
16
Description
SETUP
R W
R B G
RS232
MEDIA
#
DVD player,
Set-top Box,
HDTV receiver
Description
Power cord
9
Audio cable Jack/RCA
2
LAN cable
10
VGA to component/HDTV adapter
3
USB cable
11
3 RCA component cable
4
HDMI cable
12
RS232 cable
5
VGA cable
13
Audio cable jack for wired remote
6
S-Video cable
14
12V DC cable
7
Composite video cable
15
Mouse
8
Audio cable jack/jack
USB disk/stick
16(*) USB WiFi adapter ( for USB A2 only)
Downloaded From projector-manual.com Acer Manuals
English
10
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note: "*" USB drive limitation, do not support power
consumption over 500mA. Please have external power for USB
device.
Note: To enable wireless function, the USB wireless adapter must
be plugged into the USB A2 port.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
11
Turning on the Projector
1
Remove the lens cap.(Illustration #1)
2
Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
3
Turn on the projector by pressing "Power" button on the control panel,
and the Power indicator LED will turn blue.(Illustration #2)
4
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
If the screen displays "Lock" and "Source" icons, it means the
projector is locked onto a specific source type and there is no such
type of input signal detected.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
2
M
O
ZO
MP
LA
CK
BA
SO
UR
CE
M
EN
U
MP
TE
EN
TE
R
Power button
1
Lens cap
Downloaded From projector-manual.com Acer Manuals
English
Turning the Projector On/Off
English
12
Turning the projector off
1
To turn the projector off, press the power button. This message appears:
"Please press the power button again to complete the shutdown process."
Press the power button again.
2
The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 2 minutes to
ensure that the system cools properly. (only supported under "Instant
Resume" mode)
3
As long as the power cord remains plugged in, you can press the power
button to turn the projector immediately back on anytime during the 2minute shutdown process. (only supported under "Instant Resume" mode)
4
Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
5
It is now safe to unplug the power cord.
Warning indicators:
•
"Please press the power button again to complete the shutdown
process."
This onscreen message indicates that the projector has overheated.
The lamp with automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
•
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and the
LED lamp indicator turns solid red, contact your local reseller or
service center.
Downloaded From projector-manual.com Acer Manuals
13
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise/lower the image:
1
Raise the image to the desired height angle (Illustration #1), then pull out
the stand feet into position.
2
Use Tilt adjusting wheel (Illustration #2) to fine-tune the display angle.
3
Use Lens shift control rings to move the image to the ideal position. (refer
to page 20)
1 Elevator feet
2 Tilt adjusting wheels
Downloaded From projector-manual.com Acer Manuals
English
Adjusting the Projected Image
English
14
How to optimize image size and distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
•
WUXGA series
If the projector is 2.0 m from the screen, good image quality is possible for
image sizes between 41" and 62".
Note: Remind as below figure, the space of 100 cm height is
required when located at 2.0 m distance.
Ma
x sc
ree
n si
ze
Min
scre
en
si
ze
B
62"
41"
Height: 100 cm
from base to
Height: top of image
66 cm
C
A
2.0 m
Desired Distance
Screen size
Top
Screen size
Top
Desired
(Min zoom)
(Max zoom)
Distance
Diagonal
From base to top Diagonal
From base to top
(m)
W (cm) x H
W (cm) x H
(inch)
of image (cm)
(inch)
of image (cm)
<A>
(cm)
(cm)
<B>
<C>
<B>
<C>
1.5
31
66 x 41
49
47
100 x 63
75
2
41
88 x 55
66
62
134 x 84
100
2.5
51
110 x 69
82
78
167 x 105
126
3
61
132 x 82
99
93
201 x 126
151
3.5
71
154 x 96
115
109
234 x 146
176
4
81
176 x 110
132
124
268 x 167
201
4.5
92
197 x 123
148
140
301 x 188
226
5
102
219 x 137
165
155
335 x 209
251
6
122
263 x 165
197
186
402 x 251
301
7
143
307 x 192
230
218
469 x 293
351
8
163
351 x 219
263
249
535 x 335
402
9
183
395 x 247
296
280
602 x 377
452
10
204
439 x 274
329
311
669 x 418
502
11
224
483 x 302
362
342
736 x 460
552
12
244
527 x 329
395
373
803 x 502
602
Zoom Ratio: 1.5x
Downloaded From projector-manual.com Acer Manuals
15
1080p series
If the projector is 2.0 m from the screen, good image quality is possible for
image sizes between 40" and 60".
Note: Remind as below figure, the space of 98 cm height is
required when located at 2.0 m distance.
Ma
x sc
re e
n si
Mi n
scre
ze
en s
B
ize
60"
40 "
Height: 98 cm
from base to
Height: top of image
64 cm
C
A
2.0 m
Desired Distance
Screen size
Top
Screen size
Top
Desired
(Min zoom)
(Max zoom)
Distance
From base to Diagonal
From base to top
Diagonal
(m)
W (cm) x
W (cm) x
top of image
(inch)
(inch)
of image (cm)
<A>
H (cm)
H (cm)
<B>
<B>
(cm) <C>
<C>
1.5
30
66 x 37
48
45
110 x 56
73
2
40
88 x 49
64
60
134 x 75
98
2.5
50
110 x 62
80
76
167 x 94
122
3
59
132 x 74
96
91
201 x 113
147
3.5
69
154 x 86
112
106
234 x 132
171
4
79
176 x 99
128
121
268 x 151
196
4.5
89
197 x 111
144
136
301 x 169
220
5
99
219 x 123
160
151
335 x 188
245
6
119
263 x 148
193
181
402 x 226
294
7
139
307 x 173
225
212
469 x 264
343
8
159
351 x 197
257
242
535 x 301
392
9
178
395 x 222
289
272
602 x 339
441
10
198
439 x 247
321
302
669 x 377
489
11
218
483 x 272
353
333
736 x 414
538
12
238
527 x 296
385
363
803 x 452
587
Zoom Ratio: 1.5x
Downloaded From projector-manual.com Acer Manuals
English
•
English
16
•
WXGA series
If the projector is 2.0 m from the screen, good image quality is possible for
image sizes between 39" and 59".
Note: Remind as below figure, the space of 104 cm height is
required when located at 2.0 m distance.
Ma
x sc
ree
n
M in
sc re
size
en s
B
iz e
59"
39 "
Height: 104 cm
from base to
Height: top of image
68 cm
C
A
2.0 m
Desired Distance
Screen size
Top
Screen size
Top
Desired
(Min zoom)
(Max zoom)
Distance
From base to Diagonal
From base to top
Diagonal
(m)
W (cm) x
W (cm) x
top of image
(inch)
(inch)
of image (cm)
<A>
H (cm)
H (cm)
<B>
<B>
(cm) <C>
<C>
1.5
29
63 x 39
51
44
96 x 60
78
2
39
84 x 52
68
59
127 x 80
104
2.5
49
105 x 65
85
74
159 x 100
129
3
58
125 x 78
102
89
191 x 120
155
3.5
68
146 x 91
119
104
223 x 139
181
207
4
78
167 x 105
136
118
255 x 159
4.5
87
188 x 118
153
133
287 x 179
233
5
97
209 x 131
170
148
319 x 199
259
6
117
251 x 157
204
178
382 x 239
311
7
136
293 x 183
238
207
446 x 279
362
8
155
334 x 209
272
237
510 x 319
414
9
175
376 x 235
306
266
574 x 359
466
10
194
418 x 261
340
296
637 x 398
518
11
214
460 x 287
374
325
701 x 438
570
12
233
502 x 314
408
355
765 x 478
621
Zoom Ratio: 1.5x
Downloaded From projector-manual.com Acer Manuals
17
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
•
WUXGA series
To obtain an image size of 60" set the projector at a distance 1.9 m and 2.9 m
from the screen.
A
60"
Desired image size
D
Height: 97 cm
from base to top
of image
1.9 m
2.9 m
C
B
Desired Distance
Desired Image Size
Diagonal (inch)
<A>
30
40
50
60
70
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.5x
Distance (m)
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
65 x 40
86 x 54
108 x 67
129 x 81
151 x 94
172 x 108
194 x 121
215 x 135
258 x 162
323 x 202
388 x 242
431 x 269
538 x 337
646 x 404
1.0
1.3
1.6
1.9
2.3
2.6
2.9
3.2
3.9
4.8
5.8
6.4
8.0
9.7
1.5
2.0
2.5
2.9
3.4
3.9
4.4
4.9
5.9
7.4
8.8
9.8
12.3
Downloaded From projector-manual.com Acer Manuals
Top (cm)
From base to top of
image
<D>
48
65
81
97
113
129
145
162
194
242
291
323
404
485
English
How to get a preferred image size by adjusting
distance and zoom
English
18
•
1080p series
To obtain an image size of 60" set the projector at a distance 2.0 m and 3.0 m
from the screen.
A
60"
Desired image size
D
Height: 97 cm
from base to top
of image
2.0 m
3.0 m
C
Desired Image Size
B
Desired Distance
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
30
66 x 37
1.0
1.5
Top (cm)
From base to top of
image
<D>
49
40
89 x 50
1.3
2.0
65
50
111 x 62
1.7
2.5
81
60
133 x 75
2.0
3.0
97
70
155 x 87
2.3
3.5
113
80
177 x 100
2.6
4.0
130
90
199 x 112
3.0
4.5
146
100
221 x 125
3.3
5.0
162
120
266 x 149
4.0
6.1
194
150
332 x 187
5.0
7.6
243
180
398 x 224
6.0
9.1
291
200
443 x 249
6.6
10.1
324
250
553 x 311
8.3
12.6
405
300
664 x 374
9.9
***
486
Diagonal (inch)
<A>
Distance (m)
Zoom Ratio: 1.5x
Downloaded From projector-manual.com Acer Manuals
19
WXGA series
To obtain an image size of 60" set the projector at a distance 2.0 m and 3.1 m
from the screen.
A
60"
Desired image size
D
Height: 105 cm
from base to top of
image
2.0 m
3.1 m
C
B
Desired Distance
Desired Image Size
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
30
65 x 40
1.0
1.5
Top (cm)
From base to top of
image
<D>
53
40
86 x 54
1.4
2.1
70
50
108 x 67
1.7
2.6
88
60
129 x 81
2.0
3.1
105
70
151 x 94
2.4
3.6
123
80
172 x 108
2.7
4.1
140
90
194 x 121
3.0
4.6
158
100
215 x 135
3.4
5.2
175
120
258 x 162
4.1
6.2
210
150
323 x 202
5.1
7.7
263
180
388 x 242
6.1
9.3
315
200
431 x 269
6.8
10.3
350
250
538 x 337
8.4
12.9
438
300
646 x 404
10.1
***
525
Diagonal (inch)
<A>
Distance (m)
Zoom Ratio: 1.5x
Downloaded From projector-manual.com Acer Manuals
English
•
English
20
How to get a preferred image position by adjusting
lens shift
The projector is equipped with lens shift for adjusting the position of projected
image right and left or up and down without requiring you to physically move
the projector.
Vertical Lens
Shift ring
Horizontal
Lens Shift ring
Note: The figures shown in this section are for reference only not
approximate value. The figures between units can be different due to
assembly tolerance.
Downloaded From projector-manual.com Acer Manuals
21
•
WUXGA series
The vertical image height can be adjusted 20% of the image height.
With the lens in the centre position the horizontal image position can be
adjusted to the left or right by up to a maximum of 15% of the image width.
120%(V), 0%(H)
7.5%(H)
-7.5%(H)
110%(V)
-15%(H)
H x 15%
15%(H)
100%(V)
H x 15%
H
V x 20%
V
V
Offset max=
V x 25%
Offset min= V x 5%
SOURCE
BACK
Downloaded From projector-manual.com Acer Manuals
ENTER
English
Adjusting the horizontal or vertical image position
English
22
•
WXGA/1080p series
The vertical image height can be adjusted between 5% and 30% of the image
height. (The minimum vertical image offset is fixed at 5% of the image height
above the centre of the projector lens.)
With the lens in the centre position the horizontal image position can be
adjusted to the left or right by up to a maximum of 15% of the image width.
130%(V), 0%(H)
7.5%(H)
-7.5%(H)
120%(V)
-15%(H)
H x 15%
15%(H)
105%(V)
H x 15%
H
V x 25%
V
V
Offset max=
V x 25%
Offset min= V x 5%
SOURCE
BACK
Downloaded From projector-manual.com Acer Manuals
ENTER
23
Installation menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No signal
input" is displayed on the screen.
The menu options include settings and adjustments for screen size and distance,
focus, keystone correction and more .
1
Turn on the projector by pressing "Power" button on the control pad.
2
Press the "MENU" button on the control pad to launch the OSD for
projector installation and maintenance.
3
The background pattern acts as a guide to adjusting the calibration and
alignment settings, such as screen size and distance, focus and more .
4
The Installation menu includes the following options:
•Projection method
•Manual Keystone settings
•LAN/WiFi settings
•LAN IP/ Mask settings
•Language settings
•Reset to factory default function
Use the up and down arrow keys to select an option, the left and right
arrow keys to adjust selected option settings, and the right arrow key to
enter a submenu for feature setting. The new settings will be saved
automatically upon exiting the menu.
Downloaded From projector-manual.com Acer Manuals
English
User Controls
English
24
5
Push the menu button anytime to exit the menu and return to the Acer
welcome screen.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
25
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the remote control or control
panel.
•
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
submenu for feature setting.
•
Use the
using the
to enter
keys to select the desired item and adjust the settings by
keys.
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the remote control or control panel, the screen will
return to the main menu.
•
To exit OSD, press "MENU" on the remote control or control panel again.
The OSD menu will close and the projector will automatically save the new
settings.
Main menu
Setting
Sub menu
Note: Some of the following OSD settings may not be available.
Please refer to the actual OSD of your projector.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
Onscreen Display (OSD) Menus
English
26
Color
Display Mode
There are many factory presets optimized for various types of
images.
•
Bright: For brightness optimization.
•
Presentation: For meeting presentation.
•
Standard: For common environment.
•
Video: For playing video in a bright environment.
•
Movie: For brighter and general movie/video/photo playing.
•
Dark Cinema: For dark movie content.
•
Game: For game content.
•
Sports: For sport picture.
•
User: Memorize user's settings.
Wall color
Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Brightness
Adjust the brightness of the image.
Contrast
Saturation
Tint
Color
Temperature
•
Press
to darken the image.
•
Press
to lighten the image.
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
•
Press
to decrease the contrast.
•
Press
to increase the contrast.
Adjusts a video image from black and white to fully saturated
color.
•
Press
to decrease the amount of color in the image.
•
Press
to increase the amount of color in the image.
Adjusts the color balance of red and green.
•
Press
to increase the amount of green in the image.
•
Press
to increase the amount of red in the image.
Mode
Use this function to choose CT1, CT2 (Native), CT3, User mode.
R Gain
Adjusts the red gain for color temperature optimization.
G Gain
Adjusts the green gain for color temperature optimization.
B Gain
Adjusts the blue gain for color temperature optimization.
Dynamic Black
Choose "On" to automatically optimize the display of dark movie
scenes enabling them to be shown in incredible detail.
Gamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery looks brighter.
Downloaded From projector-manual.com Acer Manuals
27
Ind. Color Management
Adjusts the red, green, blue, cyan, yellow and magenta colors.
Ind. Hue
Adjusts the color balance of red and green.
Ind. Saturation
Adjusts the selected color to be less or more saturated color.
Ind. Gain
Adjusts the selected color's contrast.
Brilliant Color
Produces an expanded on-screen color spectrum that delivers
enhanced color saturation for bright, true-to-life images.
White Peaking
Increases the brightness of whites that are near 100%. (video
sources only)
Film Mode
Sets the image optimized to 24-frame True Film mode.
Noise Reduction
Adjusts signal noise reduction."0" means the noise reduction is off,
">0" increase noise reduction.
Black Extension
This ensures optimum black level for each analog source.
Note: "Saturation" and "Tint" functions are not supported under computer
or HDMI mode.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
Advanced
English
28
Image
Projection
•
Front-Desktop: The factory default setting.
•
Rear-Desktop: When you select this function, the projector
reverses the image so you can project from behind a translucent
screen.
•
Rear-Ceiling: When you select this function, the projector
reverses and inverts the image at same time. You can project from
behind a translucent screen with ceiling mounted projection.
•
Front-Ceiling: When you select this function, the projector
inverts the image for ceiling-mounted projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•
Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
•
L.Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Manual Keystone
Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
Sharpeness
H. Position
V. Position
Adjusts the sharpness of the image.
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
•
Press
to move the image left.
•
Press
to move the image right.
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
Downloaded From projector-manual.com Acer Manuals
29
HDMI Scan Info
Adjust the overscan ratio of the HDMI image on screen.
•
Auto: Automatically adjust by information from player.
•
Underscan: Always no overscan on HDMI image.
•
Overscan: Always keep overscan on HDMI image.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
HDMI Color Range Adjust the color range of the HDMI image data to correct color display
error.
•
Auto: Automatically adjust by information from player.
Limited Range: Prosess the input image as limited color range data.
•
•
Full Range: Prosess the input image as full color range data.
English
30
Setting
Startup Screen
Use this function to select your desired startup screen. If you
change the setting, the changes will take effect when you exit the
OSD menu.
•
Acer: The default startup screen of your Acer projector.
•
User: Use memorize picture from "Screen Capture" function.
Screen Capture
Use this function to customize the startup screen. To capture the
image that you want to use as the startup screen, follow the
instructions below.
Notice:
Before proceeding with the following steps, make sure that the
"Keystone" is set to the default value 0 and the aspect ratio is set
to 4:3. For details, refer to the "Image" section.
•
Change the "Startup Screen" from the default setting "Acer"
to "User".
•
Press "Screen Capture" to customize the startup screen.
•
A dialog box appears to confirm the action. Choose "Yes" to
use the current image as your customized startup screen. The
capture range is the red rectangular area. Choose "No" to
cancel the screen capture and exit the onscreen display (OSD).
•
A message appears, stating that the screen capture is in
progress.
•
When the screen capture is finished, the message disappears
and the original display is shown.
•
The customized startup screen, as shown below, takes effect
when there is a new input signal or when you restart the
projector.
Source Lock
When source lock is turned "off", the projector will search for
other signals if the current input signal is lost. When source lock is
turned "on", it will "lock" the current source channel unless you
press "Source" button on the remote control for the next channel.
Closed Caption
Selects a preferred closed captioning mode from CC1, CC2, CC3,
CC4, (CC1 displays captions in the primary language in your area).
Select "Off" to turn off the captioning feature. This function is only
available when a composite video or S-Video input signal is
selected and its system format is NTSC.
<Note> Set your screen aspect ratio to 4:3. This function is not
available when the aspect ratio is "16:9" or "Auto" .
Auto Screen
Default is "On", the down/up move of electronic screen will be
related with power on/off of Projector.
VGA OUT (Standby)
Default is "Off". Choose "On" to enable VGA OUT connection.
LAN/WiFi
LAN/WiFi
Default is "Off". Choose "On" to enable LAN connection.
<Note> If users want to do LAN control under standby mode,
change VGA OUT (Standby) from Off to On.
LAN IP/ Mask
Identify IP and Mask address.
LAN Reset
Reset LAN function.
Reset
•
Press the
button and choose "Yes" to return the
parameters on all menus to the factory default settings.
Downloaded From projector-manual.com Acer Manuals
31
Security
This projector provides a useful security function for the
administrator to manage usage of the projector .
Press
to change the "Security" setting. If the security function
is enabled, your must enter the "Administrator Password" first
before changing the security settings.
•
Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to the
"User Password" section for details.
•
If "Off" is selected, then the user can turn on the projector
without password.
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
•
Press
•
•
The range is from 10 minute to 990 minutes.
When the time is up, the projector will prompt the user to
enter the password again.
The factory default setting of "Timeout(Min.)" is "Off".
Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
•
•
or
to select the timeout interval.
User Password
•
Press
•
Press number keys to set your password on the remote control
and press "MENU" to confirm.
•
Press
•
Enter the password when you see "Confirm Password"
displayed.
The password should be between 4 and 8 characters long.
If you select "Request password only when plugging the
power cord in.", the projector will prompt the user to enter
the password every time the power cord is plugged.
If you select "Always request password while projector turns
on.", the user has to enter the password every time when the
projector is turned on.
•
•
•
to setup or change the "User Password".
to delete character.
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
Press
to change the "Administrator Password".
•
The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
•
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
•
If losing this security card and number, please contact with an
Acer service center.
Downloaded From projector-manual.com Acer Manuals
English
Security
English
32
Lock to user startup screen
Default Lock User Startup Screen is "Off". If lock user startup screen
is "On", users cannot change startup screen anymore and avoid
other users change that arbitrarily. Choose "Off" to unlock startup
screen.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
33
ECO Mode
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
High Altitude
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Turn Off Mode
Instant Off: Shuts down the projector without fan cooling.
Instant Resume: Resumes the system when the Power button is
pressed again within 2 minutes.
Timer
Start (or Stop)
Press to start (or stop) the timer.
Period
Press
or
to adjust the timer period.
Alarm
Select this function to adjust the notification volume when the
timer function is enabled and time is up.
Timer Display
Choose "On" or "Off" to which timer mode to display on the
screen.
Location
Choose the location of the timer on the screen.
Auto Shutdown
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 120 minutes)
Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Press the
button and choose "Yes" to turn the lamp hour
counter to 0 hours.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
Management
English
34
Audio
Volume
•
Press
to decrease the volume.
•
Press
to increase the volume.
Mute
•
•
Choose "On" to mute the volume.
Choose "Off" to restore the volume.
Power On/Off Volume
Select this function to adjust the notification volume when
turning the projector on/off.
Alarm Volume
Select this function to adjust the volume of any warning
notifications.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
35
3D
Choose "On" to enable DLP 3D function.
•
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
•
Off: Turn off 3D mode.
24P Boost
Choose "96Hz" or "144Hz" to compatible with 3D glasses.
2D to 3D
2D to 3D
Support most of the 2D contents.
Choose "On" to enable 2D to 3D function supported by DLP 3D
technology. Please use DLP 3D glasses to have correct
performance.
Mode
Choose mode of "Photo", "Movie", "Jump-Out" and "User" as
your prefered 3D setting.
Convergence
Choose convergrence effect of "Inward", "Middle" and
"Outword" as your preferred 3D setting in "User" mode.
Depth
Choose depth effect of "Low", "Middle" and "Strong" as your
prefered 3D setting in "User" mode.
3D Format
If the 3D content is not displayed correctly, you can select a 3D
format that suits the 3D content you are viewing and obtain the
best result.
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of
left/right image sequence to get the correct image (for DLP 3D).
3D Warning Message
Choose "On" to display the 3D warning message.
Note: It needs correct settings on graphic card 3D application program for
correct 3D display.
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media
Player can support 3D format files. You can download these three players
on web page below,
- Stereoscopic Player (Trial):
http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial):
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: "3D L/R Invert" is only available when 3D is enabled.
Note: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Note: It will takes much time and some garbage screen might happen while
switching between 2D mode, 3D mode and 2D to 3D mode.
Note: Functions vary depending on model definition.
Downloaded From projector-manual.com Acer Manuals
English
3D
English
36
Language
Language
Choose the multilingual OSD menu. Use the
select your preferred menu language.
•
Press
to confirm the selection.
Downloaded From projector-manual.com Acer Manuals
or
key to
37
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
1
2
Problem
No image appears
onscreen
Partial, scrolling or
incorrectly
displayed
image(For PC
(Windows 2000/XP/
Vista/Windows 7/
Windows 8))
Solution
•
Connected as described in the "Getting Started"
section.
•
Ensure none of the connector pins are bent or
broken.
•
Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
•
•
Press "RESYNC" on the remote control or control panel.
For an incorrectly displayed image:
•
Open "My Computer," open the "Control
Panel," and then double-click the "Display"
icon.
•
Select the "Settings" tab.
•
Verify that your display resolution setting is
lower than or equal to UXGA (1600 x 1200).
•
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to UXGA (1600 x 1200).
•
Click the "Change" button under the
"Monitor" tab.
•
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to UXGA
(1600 x 1200).
Downloaded From projector-manual.com Acer Manuals
English
38
3
4
5
6
7
Partial, scrolling or
incorrectly
displayed image
(for notebooks)
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
•
Press "RESYNC" on the remote control or control
panel.
•
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4],
NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
•
Adjust the "Tracking" to correct it. Refer to the
"Image" section for more information.
•
Change the display color depth settings on your
computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 4.9 to 33.3 feet (1.5 to 10.1
meters) (WXGA series) /4.9 to 32.6 feet (1.5 to 9.9
meters) (1080P series) / 4.9 to 31.7 feet (1.5 to 9.7
meters) (WUXGA series) from the projector. Refer to
the "How to Get a Preferred Image Size by Adjusting
Distance and Zoom" section for more information.
Downloaded From projector-manual.com Acer Manuals
39
9
10
11
Image is stretched
when displaying a
"widescreen" DVD
title
Image is too small
or too large
Image has slanted
sides
Image is reversed
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
•
If you play an Letterbox (LBX) format DVD title,
please change the format to Letterbox (LBX) in the
projector OSD.
•
•
Adjust the zoom ring on the top of the projector.
•
Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
•
If possible, reposition the projector so that it is
centered on the screen.
•
Press the "Keystone / " on the control panel or
on the remote control until the sides are vertical.
•
Press the "Keystone" on the OSD until the sides are
vertical.
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
Move the projector closer to or further from the
screen.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Downloaded From projector-manual.com Acer Manuals
English
8
English
40
OSD Messages
#
1
Condition
Message
Message Reminder
• Fan Fail - the system fan is not working.
• Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
Please also check the dust filters if they are installed. If the
dust filter is clogged with dust, please clean it. Please refer to
"Cleaning and replacing the dust filter" for details.
• Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Downloaded From projector-manual.com Acer Manuals
41
English
LED & Alarm Definition Listing
LED Messages
Lamp LED
Temp LED
Power LED
Red
Red
Red
Blue
Standby
(power cord plugged in)
--
--
V
--
Power button ON
--
--
--
V
Lamp retry
--
--
--
Quick
flashing
Turning off
(cooling state)
--
--
Quick
flashing
--
Turning off
(cooling completed)
--
--
V
--
Error (thermal failure)
--
V
--
V
Error (fan lock failure)
--
Quick
flashing
--
V
Error (lamp breakdown)
V
--
--
V
Error (color Wheel fail)
Quick
flashing
--
--
V
Message
Downloaded From projector-manual.com Acer Manuals
Cleaning and replacing the dust filters
Cleaning the dust filters
Clean the dust filters after every 1000 hours of use. If they are note cleaned
periodically, they can become clogged with dust, preventing proper ventilation.
This can cause overheating and damage the projector.
BAC
K
LAM
P
ME
NU
SOU
RCE
ENT
ER
TEM
P
English
42
2
1
Follow these steps:
1
2
3
4
5
6
Turn the projector off. Wait for the Power LED to stop flashing then
unplug the power cord.
Allow the projector at least 30 mins to cool down.
Unplug the corner (Illustration #1)
Pull out the dust filter (Illustration #2)
To clean the dust filters, use a small vacuum cleaner designed for
computers and other office equipment.
If the dirt is difficult to remove or the filter is broken, please contact your
local dealer or service center to obtain a new filter.
Downloaded From projector-manual.com Acer Manuals
43
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life. You will be shown a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooling down for at least 30
minutes before changing the lamp.
Warning: The lamp compartment is hot! Allow it to cool down
before changing the lamp.
P
LAM
BAC
K
SO
UR
CE
NU
ME
TEM
P
ENT
ER
1
4
3
2
To Change the Lamp
1
Turn off the projector by pressing the power button.
2
Allow the projector at least 30 mins to cool down.
3
Disconnect the power cord.
4
Find the "OPEN" button on side of the projector and push it to open the
cover. (Illustration #1)
5
Open the cover. (Illustration #2)
6
Remove the two screws that secure the lamp module.(Illustration #3)
7
Pull out the lamp module by force. (Illustration #4)
To replace the lamp module, reverse the previous step.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Downloaded From projector-manual.com Acer Manuals
English
Replacing the Lamp
English
44
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
2
m
13 m
m 0
m
1
.9
49mm
mm
8.4
130 mm
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of four-cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Short Rod
Long Rod
Extension Rod
Screw Type A
50 mm length / 8 mm diameter -
Long Cylinder Cap
Allen Key
- For tightening/loosening
Tightening Screw
Medium Rod
Downloaded From projector-manual.com Acer Manuals
45
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Smaller Washer
Large Washer
Projector Bracket
Supports projector and allowsfor adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Large cylinder cap
Allen Key
Screw Type A
50 mm length/ 8 mm diameter
Downloaded From projector-manual.com Acer Manuals
- For tightening/loosening
Tightening Screw
English
3
English
46
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 4 mm diameter screws are enclosed in
the screw pack.
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
Large
Small
4
25
V
V
82.52mm
SCREW SPEC. M4 x 25 mm
ʳ
140.00mm
Downloaded From projector-manual.com Acer Manuals
47
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
Projection system
DLP®
Resolution
•
P7305W/F125/PF-W07 series: True 1280x800 WXGA
resolution
•
P7505/F155/PF-807/H9505BD/E255D/HE-822J series:
True 1920x1080 1080p resolution
•
P7605/F165/PF-WU07 series: True 1920x1200
WUXGA resolution
Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p (1920x1080), WUXGA-RB (1920 x
1200)
Computer compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,
WXGA, WXGA+, WSXGA+
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i/p), EDTV (480p, 576p),
Aspect ratio
SDTV (480i, 576i)
Full, 4:3, 16:9, L.Box
Displayable colors
1.07 billion colors
Projection lens
F = 2.45 ~ 2.9, f = 22.18mm ~ 33.27mm, 1:1.5 Manual
Zoom and Manual Focus
Projection screen size (diagonal)
•
P7305W/F125/PF-W07 series: 29" (74 cm) ~ 300"
(762 cm)
•
P7505/F155/PF-807/H9505BD/E255D/HE-822J series:
30" (76cm) ~ 300" (762cm)
•
P7605/F165/PF-WU07: 31" (78cm) ~ 300" (762cm)
•
P7305W/F125/PF-W07 series: 4.9' (1.5 m) ~ 33.3'
(10.1 m)
•
P7505/F155/PF-807/H9505BD/E255D/HE-822J series:
4.9' (1.5 m) ~ 32.6' (9.9 m)
•
P7605/F165/PF-WU07 series: 4.9' (1.5m) ~ 31.7'
(9.7m)
•
P7305W/F125/PF-W07 series: 59"@2m (1.57 ~
2.39:1)
•
P7505/F155/PF-807/H9505BD/E255D/HE-822J series:
60"@2m (1.49 ~ 2.28:1)
•
P7605/F165/PF-WU07 series: 62"@2m (1.49 ~
2.28:1)
Projection distance
Throw ratio
Horizontal scan rate
15k ~ 100kHz
Vertical refresh scan rate
24 ~ 120 Hz
Downloaded From projector-manual.com Acer Manuals
English
Specifications
English
48
Lamp type
Keystone correction
•
P7505/F155/PF-807/P7605/F165/PF-WU07/P7305W/
F125/PF-W07 series:
370 W user-replaceable lamp
•
H9505BD/E255D/HE-822J series:
280 W user-replaceable lamp
+/- 40 degrees
Audio
Internal speaker with 3 W x 2 output
Weight
7.5 kg (16.5 Ibs.)
Dimensions (W x D x H)
398 mm x 310 mm x 140 mm (15.7" x 12.2" x 5.5")
Digital Zoom
2x
Power supply
AC input 100 - 240 V, 50 - 60 Hz
Power consumption
•
P7505/F155/PF-807/P7605/F165/PF-WU07/P7305W/
F125/PF-W07 series:
Normal mode: 460W ± 10% @ 110VAC
ECO mode: 350W ± 10% @ 110VAC
Standby mode < 0.5W
•
H9505BD/E255D/HE-822J series:
Normal mode: 337W ± 10% @ 110VAC
ECO mode: 290W ± 10% @ 110VAC
Standby mode < 0.5W
Operating temperature
0ºC to 40ºC / 32ºF to 104ºF
I/O connectors
•
•
•
•
•
•
•
Power socket x1
•
•
•
•
•
•
•
Mini USBx1: for firmware upgrade
•
•
RJ45 x1
VGA input x2
Composite input x1
S-Video x1
VGA output x1
HDMI x3
RS232 x1: 9-pin male connector for projector
remote control
USB A x2
3.5 mm audio jack input x2
3.5 mm audio jack output x1
SPDIF RCA jack output x1
3 RCA Component video x1
3.5 mm jack input x1: for wired IR remote
control
DC Jack x1
Downloaded From projector-manual.com Acer Manuals
49
•
•
•
•
•
•
•
AC power cord x1
•
•
Quick start guide x1
•
•
•
Security card x1
VGA cable x1
Composite video cable x1
Remote control x1
Battery x 2 (for remote control) (option)
User's Guide (CD-ROM) x1
User's guide (CD-ROM) x1 (for multi-media and
wireless functions)
Quick start guide x1 (for multi-media and
wireless functions)
Carrying case x1
Dust filter x1
Note: Design and specifications are subject to change without
notice.
Downloaded From projector-manual.com Acer Manuals
English
Standard package contents
English
50
Compatibility modes
A. VGA Analog
1
VGA Analog - PC Signal
Modes
VGA
SVGA
XGA
SXGA
QuadVGA
SXGA+
UXGA
Power Mac G4
i Mac DV (G3)
Resolution
640x480
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280X1024
1280X1024
1280X1024
1280X1024
1280x960
1280x960
1400x1050
1600x1200
640x480
640x480
800x600
1024x768
1152x870
1280x960
1024x768
V.Frequency [Hz]
60
72
75
85
120
56
60
72
75
85
120
60
70
75
85
120
70
75
85
60
72
75
85
60
75
60
60
60
66.6(67)
60
60
75
75
75
Downloaded From projector-manual.com Acer Manuals
H.Frequency [KHz]
31.5
37.9
37.5
43.3
61.9
35.1
37.9
48.1
46.9
53.7
77.4
48.4
56.5
60.0
68.7
99.0
63.8
67.5
77.1
64.0
77.0
80.0
91.1
60.0
75.2
65.3
75.0
31.4
34.9
37.9
48.4
68.7
75.0
60.0
51
VGA Analog - Extended Wide timing
Modes
WXGA
WSXGA+
3
Resolution
1280x768
1280x768
1280x768
1280x720
1280x720
1280x800
1440x900
1920x1200-RB
1680x1050
1920x1080-RB
(1080P)
1366x768
V.Frequency [Hz]
60
75
85
60
120
60
60
60
60
H.Frequency [KHz]
47.8
60.3
68.6
44.8
92.9
49.6
59.9
74.0
65.3
60
67.5
60
47.7
VGA Analog -Component Signal
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
480i
576i
480p
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
720x480(1440x480)
720x576(1440x576)
720x480
720x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
59.94 (29.97)
50(25)
59.94
50
60
50
60(30)
50(25)
23.97/24
60
50
15.7
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
V.Frequency [Hz]
60
72
75
85
120
56
H.Frequency [KHz]
31.5
37.9
37.5
43.3
61.9
35.1
B. HDMI Digital
1
HDMI - PC Signal
Modes
VGA
SVGA
Resolution
640x480
640x480
640x480
640x480
640x480
800x600
Downloaded From projector-manual.com Acer Manuals
English
2
English
52
XGA
SXGA
QuadVGA
SXGA+
UXGA
Power Mac G4
i Mac DV (G3)
2
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
1600x1200
640x480
640x480
800x600
1024x768
1152x870
1280x960
1024x768
60
72
75
85
120
60
70
75
85
120
70
75
85
60
72
75
85
60
75
60
60
60
66.6(67)
60
60
75
75
75
37.9
48.1
46.9
53.7
77.4
48.4
56.5
60.0
68.7
99.0
63.8
67.5
77.1
64.0
77.0
80.0
91.1
60.0
75.2
65.3
75.0
31.4
34.9
37.9
48.4
68.7
75.0
60.0
V.Frequency [Hz]
60
75
85
60
120
60
60
60
60
H.Frequency [KHz]
47.8
60.3
68.6
44.8
92.9
49.6
59.9
74.0
65.3
60
67.5
HDMI - Extended Wide timing
Modes
WXGA
WSXGA+
Resolution
1280x768
1280x768
1280x768
1280x720
1280x720
1280x800
1440x900
1920x1200-RB
1680x1050
1920x1080-RB
(1080P)
Downloaded From projector-manual.com Acer Manuals
53
3
47.7
V.Frequency [Hz]
59.94 (29.97)
50(25)
59.94
50
60
50
60(30)
50(25)
23.97/24
60
50
H.Frequency [KHz]
15.7
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
67.5
56.3
HDMI - Video Signal
Modes
480i
576i
480p
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
4
60
Resolution
720x480(1440x480)
720x576(1440x576)
720x480
720x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
HDMI - 1.4a 3D Timing
Modes
720p (Frame Packing)
720p (Frame Packing)
1080p (Frame Packing )
720p (Top and Bottom)
720p (Top and Bottom)
1080i (Top and Bottom)
1080i (Top and Bottom)
1080p (Top and Bottom)
1080p (Top and Bottom)
1080p (Top and Bottom)
720p (Side by Side (Half))
1080i (Side by Side (Half))
1080i (Side by Side (Half))
1080p (Side by Side (Half))
1080p (Side by Side (Half))
Graphic source monitor
range limits
Resolution
V.Frequency [Hz] H.Frequency [KHz]
1280 x 720
50
1280 x 720
60
1920 x1080
24
1280 x 720
50
1280 x 720
60
1920 x1080
50 (25)
1920 x1080
60 (30)
1920 x1080
24
1920 x1080
50
1920 x1080
60
1280 x 720
60
1920 x1080
50 (25)
1920 x1080
60 (30)
1920 x1080
50
1920 x1080
60
Horizontal scan rate:
Vertical scan rate:
Max. pixel rate:
Downloaded From projector-manual.com Acer Manuals
37.5
45.0
27.0
37.5
45.0
28.1
33.8
27.0
56.3
67.5
45.0
28.1
33.8
56.3
67.5
15k-100kHz
24-120 Hz
Analog:165MHz
Digital:165MHz
English
1366x768
English
54
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Downloaded From projector-manual.com Acer Manuals
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby declares that this projector series is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact the local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
Downloaded From projector-manual.com Acer Manuals
English
Remarque à l'intention des utilisateurs canadiens
English
55
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
Contact Person: Mr. RU Jan, e-mail: ru.jan@acer.com
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921 ,Fax: +39-02 9399-2913
www.acer.it
Declare under our own responsibility that the product:
Product:
Trade Name:
Model Number:
DLP Projector
Acer
M1P1336/DWU1335/D1P1334/ DWX1333
P7505/F155/PF-807/P7605/F165/PF-WU07/H9505BD/
E255D/HE-822J/P7305W/F125/PF-W07
To which this declaration refers conforms to the relevant standard or other standardizing documents:
x
x
x
x
x
x
EN55022:2010 Class B; EN 55024:2010
EN61000-3-2:2006+A1:2009+A2:2009, Class A
EN61000-3-3:2008
EN 60950-1:2006/A11:2009/A1:2010+A12:2011
Regulation (EC) No. 1275/ 2008; EN 62301:2005
EN50581:2012
We hereby declare above product is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive
2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Year to begin affixing CE marking 2013.
_______________________________
RU Jan / Sr. Manager
Regulation, Acer Inc.
Nov. 1, 2013
Date
Downloaded From projector-manual.com Acer Manuals
Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
M1P1336/DWU1335/D1P1334/ DWX1333
Machine Type:
P1183/M403/PE-S42/X1183A/D603P/EV-S62T/
P7505/F155/PF-807/P7605/F165/PF-WU07/
H9505BD/E255D/HE-822J/P7305W/F125/PF-W07
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
Downloaded From projector-manual.com Acer Manuals
Download PDF