HINKLEY LIGHTING Ceiling light Assembly Instructions

Below you will find brief information for Ceiling light. These instructions will help you to install your new ceiling light and will guide you through the process of connecting the fixture to the electrical system. The document also covers connecting the shade and lens, which are essential parts of the fixture. Make sure to follow all safety precautions and disconnect the power supply before beginning any installation work.

PDF Download
Document
HINKLEY LIGHTING Ceiling light Assembly Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Flush mount installation
  • Chain hung installation
  • Post mount installation
  • Wire connectors with silicone sealant
  • Three-wire electrical system
  • Decorative ring and knobs

Frequently asked questions

It is important to turn off the power supply to the fixture before beginning any installation work. Always read and follow the wiring and grounding instructions in the document. Consult a qualified electrician if any new wiring is required.

For positive grounding in a 3-wire electrical system, fasten the fixture ground wire (E) to the fixture mounting strap (M) with the ground screw (S). Refer to Drawing 1 for visual guidance.

Use twist-on wire connectors and ensure they are the appropriate size for your wires. Always cover the open end of the connectors with silicone sealant to make a water-tight seal.
Preparing document for printing…
0%