Pro-Ject Debut III record player User manual

Pro-Ject Debut III offers high-quality audio playback with its Ortofon OM 5E cartridge. Enjoy adjustable downforce and anti-skating mechanisms for precise cartridge alignment. Easily switch between 33, 45, and 78 RPM playback speeds to accommodate your record collection. Connect to your amplifier's phono input and experience the dynamic sounds of your favorite vinyl.

PDF Download
Document
Pro-Ject Debut III User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Belt-driven turntable
  • Ortofon OM 5E cartridge fitted
  • Low-resonance surface
  • Easy to set up
  • Comes with a lid, 2 motor transport screws, and a tonearm transport lock

Frequently asked questions

Adjust the downforce by carefully rotating the counterweight until the armtube balances out. Then, hold the counterweight without moving it, and gently revolve the downforce scale ring until the zero is in line with the anti-skating prong. Finally, rotate the counterweight counter clockwise to adjust the downforce according to the cartridge manufacturer's recommendations.

The anti-skating force must be adjusted corresponding to the downforce. For example, if the downforce is 15-19mN, then the anti-skating weight's thread should be slipped over the second groove of the stub.

To play records at 45 r.p.m. first remove the platter. Using the accessory tool provided, hook the belt over the larger diameter part of the motor pulley. Refit the platter. To revert to 33,33 r.p.m. repeat the proceedings using the smaller step on the pulley.
Preparing document for printing…
0%