Uniden DS70 Specifications

Uniden DS70 Specifications
CONTENTS
Precautions
Installation Considerations.
2
. . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions.
. .. .... . .. .. .... . .. .3
Important Electrical Considerations.
. . . . . . . . . . . . . . . .4
Introduction
~
~
~
::s
V)
~
~
~
~
:::>
~
~
0
Welcome
5
Features
5
Included In Your Package
6
Introduction
Installation and Adjustment
DeskInstallation
Wall Installation
7
7
Installing the Handset Battery Pack.
............... 9
Charging the Battery Pack
Cleaning the Battery Contacts.
Installing and
Adjusting
9
. . . . . . . . . . . . . . . . . . . .10
Handset Ringer Volume and Tone. . . . . . . . . . . . . . . . . . 10
InstallingtheBe1tclip
11
HeadsetInstallation
Automatic Digital Code Security.
12
. . . . . . . . . . . . . . . .. 12
Using Your New Phone
MakingandReceivingCalls
13
Call Waiting
14
Page
14
TravellingOut-Of-Range
PABXConnection
14
14
Storing a Phone Number in Memory.
Dialling a NumberIn Memory.
Using Your
New Phone
. . . . . . . . . . . . . . .15
. . . . . . . . . . . . . . . . . . . 15
Changing a Stored Number from Memory.
PauseFunction
. . . . . . . . . . .15
15
3 Way Chat Function (Conferencing) . . . . . . . . . . . . . . . . 16
Chain Dialling
16
Troubleshooting
QuickReferenceChart
17
Specifications
18
Warranty
19
Controls And Functions
.20
Troubleshooting
Specifications
PRECAUTION
Beforeyoureadanythingelse,pleaseobservethefollowing:
Warning!
z0~
::q
~
~
::J
~
~
0
~
"'"
I~
~
UNIDEN DOES NOT represent this unit to be waterproof.
To reduce risk of fire, electrical shock or damageto the unit, DO NOT expose
this unit to rain or moisture.
Rechargeable
.
Nickel-Metal
Hydride
Battery
Warning
The rechargeable Ni-MH battery contained in this
equipment may explode if disposed of in fire.
. Do not charge the rechargeable Ni-MH battery in any other charger
than the one specified in this Owner's Manual.
~
A
~
This symbol indicates important operating and servicing
instructions.
~
INSTALLATION
CONSIDERATIONS
"""
~
... Selecting a Location
~
¥;
Before choosing a location for your new phone,
here are some important guidelines you should
consider:
.
.
'"
.
-
'"
.
-
The location should be close to both a phone jack and a power outlet.
Keep the base and handset away from sources of electrical noise such
as motors and fluorescent lighting.
Be sure there is sufficient space to rotate the base antenna fully vertical.
The base can be placed on a desk, tabletop or mounted on a standard
wallplate.
...
.
.,
.
2
connecting the phone line.
.
i'fi;
You should charge the battery in your handset for 15-20hours before
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a plastic connector which plugs into this type of jack. If
you do not have a modular phone jack, contact your local telephone
company for information about their installation.
IMPORTANTSAFETYINSTRUCTIONS
When using your telephone equipment, these basic safety precautions
should always be followed to reduced the risk of fire, electrical shock,
and injury:
1. Do not use this product near water; for example, near a bathtub, shower,
washbowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Do not overload wall outlets and extension cords, as this can result in the
risk of fire or electrical shock.
3. Never spill liquid of any kind on the product.
4. To reduce the risk of electric shock, do not disassemble this product.
5. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. If the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the operating
instructions (Adjust only those controls that are covered by the operating
instructions).
Improper adjustment of other controls may result in damage,
and will often require extensive repair work by a qualified technician).
E. If the product has been dropped, or the base unit has been damaged.
F. If the product exhibits a distinct change in performance.
6. Do not use the telephone to report a gas 1eakin the vicinity of the leak.
3
IMPORTANT
ELECTRICAL
. CONSIDERATIONS
,
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and damage
any device connected to it. This phone is no exception.
A
Please do not attempt to unplug any
appliance during an electrical storm.
Telephone
Line Problems
If you are having trouble with your telephone
your phone to determine
is the cause, you must leave it disconnected
A
...
service, you must first disconnect
if it is the cause of your problem. If you determine
that it
until the trouble has been corrected.
Under power failure, this telephone will not operate. Please
!msurethat a sepllJateph!)!le,!lot ~de!!!
o!!il!)e!lll"l!I¥~
is available during emergencies.
Radio Interference
Radio interference may occasionally cause buzzing and humming in your cordless
handset, or clickingnoises in the base. This interference is caused by external sources
such as cellular phone charger, TV,refrigerator, vacuum cleaner, fluorescent lighting
or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and
are too distracting, please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not be plugged into
a circuit that also powers a major appliance because of the potential for interference.
Be certain that the antenna on the Base Unit is fully extended and raised vertically.
More Than One Phone
Each telephone device that you connect draws power from the phone line. We refer
to the power drawn as the device's Ringer Equivalence
Number (REN). The REN is
shown at the bottom part of your telephone. If you are using more than one
phone or other device on the line, add up all the RENs. If the total is more than 3,
your phones may not ring.
4
.
WELCOME'
Congratulations
onyourpurchase
of theUnidenDS70
cordless
telephone.
This
phoneisdesigned
for reliability,longlife andoutstanding
performance
utilising
thelatestin 900MHz DigitalSpreadSpectrum
Technology.
~
Z
0
~
~
~
~
Z
P:::
~
~
0
~
FEATURES
.
.
.
.
.
.
.
.
.
15channels(Aust),7 channels(NZ)
900MHz Digital SpreadSpectrumTechnology
20 Memory Dials(16 digitsmaximumper memory)
32Digit Redial
Redial,Flashand PauseDialling
ToneDialling
CallWaitingCompatible
Page
.
14-DayStandbyBatteryTime
4-HourTalkTime
.
.
HandsetEarpieceand RingerVolumeControl
HearingAid Compatible
.
Auto talk
.
. Any key Answer
Auto Standby
DigitalSpreadSpectrumTechnologyutilises a digital transmission
and a "wider frequency band" compared to. a "single narrow band" 30/39 Standard
Analogue transmission. The result is a more secure conversation with the clarity of
digital sound, extended range, and minimal interference from other cordless phones.
Random Code TMdigitalsecurity automatically selects one of over 16million
codes for the handset and base. This feature prevents unauthorised
calls as a result
of your Iphone being activated by other equipment.
5
'.
.
INCLUDEDIN YOURPACKAGE.
GJ
..", "...
0--,
0,"0"
To get the most
phone,
owner's
please
manual
from your
read this
thoroughly.
Be sure to complete
the product
and mail
registration
form.
Handset
If any of these
missing
items
or damaged,
your place
are
contact
Base
~
Rechargeable Battery
AAD 900S
AC Adaptor
of purchase.
Telephone Cord
Adaptor
(Australia Only)
~
Belt Clip
6
~
Long Telephone
Cord/Plug
Desk Stand
. This Owner'sManual
. RegistrationCard
. and otherprintedmaterials
DESK
INSTALLATION'
Your DS70 can be fitted with a Desk Stand or mounted on the wall.
Beforeconnecting
your
phoneline,fully chargethe
Nickel-MetalHydridebattery
packfor 15-20hours.
.
Thread both the telephone line cord and the power cord through the semi-circle
hole in the back of the Desk Stand.
.
Insert the two tabs, located on the base of the Desk Stand, into the slots on the
bottom of the Base Unit.
.
Push down gently until the tab locks into the top of the Base Unit.
.
Now connect the telephone line cord and AC power cord into the Base Unit as
shown on page 8.
,
3, pushthedesk
stand down gently
untilthe tab locks
into the top of the
base unit
Placethepowercord so
that it doesnot createa trip
hazardor whereit could
becomechafedand createa
1.telephone line & power
cords threaded through
the desk stand,
fire or electricalhazard.
WALLINSTALLATION
Your DS70 can be wall mounted on a standard telephone wall plate.
.
Use only the Uniden AC
adaptor supplied with this
phone. Make sure it is
switched ON at all times.
.
.
.
Do not install the desk stand.
Now connect the telephone line cord and AC power cord into the Base Unit as
shown on page 8.
Position the Base so the mounting studs on the standard telephone wall plate fit
into the holes on the back of the Base Unit.
Slide the Base down on the mounting studs until it locks into place.
7
G
A
Before
D
you plug the other
end of the telephone
into the modular
cord
CHARGING
page
QEJ
jack on the
wall, charge the battery
PACK,
New Zealand
Phone socket
Australia
(See
THE BATTERY
IC) D
11).
I
Power point
1. Plugthe AC adaptor into a standard 240VAC walloutlet and switchON.
2. Chargethe battery (SeeCHARGING THE BATIERY PACK,
page 9).
3.
Plug the other end of the phone cord into the telephone jack on the wall.
4. Raise the antenna to a vertical position.
8
INSTALLING THE HANDSET BATTERY PACK
1. Press and slide the battery cover off.
Use only Uniden
Battery
2. Align the plastic connector of the
Nickel Metal Hydride battery with its socket
and plug it in.
supplied with your phone.
EJ
3. Place the battery pack inside.
4. Slide the battery cover back
until it snaps into place.
press and
slide to open
battery
compartment
0
!
CHARGINGTHEBATTERYPACK,
T Initial battery charging
Before connecting your phone for the first time, fully
charge the rechargeable battery pack for 15-20 hours
without interruption.
1. Place the handset on the base
2. Make sure that the Charging
LED lights. If the LED doesn't
light, check the AC adaptor is
plugged in and and switched
ON. Also check the handset has
good contact with the base
charging contacts.
9
T Low battery indicator
The low battery indicator shows when the
battery pack is very low and needs to be charged.
If the phone is not in use, the Low batt LED
flashes every four seconds. If the phone is in use,
the Low bait LED flashes every four seconds
and the handset beeps. Complete your
conversation as quickly as possible and return
the handset to the base for charging.
T Recharging
the battery pack
Replace the handset on the base if it's convenient. However recharging
the battery is only necessary when the Low batt LED is lit.
15 - 20 hours charging is required for a full charge - however it is safe to
leave the handset on the base for longer periods.
.
-
CLEANING'THE
BATTERY
CONTACTS
To maintain a good charge, clean all charging contacts on the handset and base
about once a month. Use a pencil eraser or other contact cleaner. DO NOT use
liquids or solvents; you may damage your phone.
HANDSETRINGERVOLUMEANDTONE
T Adjusting ringer volume
.
.
.
.
Ensure the handset is in standby mode.
Press the VolAor T key on the handset
to set the handset ringer volume.
The volume will remain on the same setting
when you hang up.
T Adjusting ringer tone
There are 4 ringer tones to choose from.
10
.
.
While in the standby mode, press the Recall
button.
Press a key (1, 2, 3 or 4) to select a ringer tone.
INSTALLING
THEBELTCLIP
T To attach the beltclip
.
Press the beltclip
handset
The handset
mounted
cannot
against
the rear of the
until it clicks into place.
be wall
with the beltc1ip
installed.
I
T To remove the beltclip
. to release.
Gently pull one side of the beltclip
11
12
~
HEADSET
INSTALLATION
A
Use only the Uniden
HS91O/HS900 headset.
Your phone may be used with an optional
headset, the Uniden HS91O/HS900.
To use this feature, simply plug the headset
into the headset jack. Your phone is
ready for hands-free conversations.
~
~
headset
jack
A
A
Keep the headset wire away
from handset and
base antennas.
AUTOMATIC
DIGITALCODESECURITY
Topreventotherpartiesfrommakingunauthorised
callsonyourphoneline,a
digitalcodewasaddedto theDS70.Yourphone'shandset
andbasesharethis
code.Thiscodeisrandomlyseteachtimeyouplacethehandset
in thebase.If
thephoneexperiences
apowerfailure,youmustresetthedigitalsecuritycodeby
placingthehandset
onthebase.
T
To reset the digital security code
1. Restore power to the base.
2. Place the handset on the base.
Talk/End (onthe handset)andIn use
(on the base) LEDs momentarily blink.
The digital security code is reset.
MAKING AND RECEIVING CALLS
A
... Basic phone operation
Referto the CONTROLS&
FUNCTIONS
diagramat the
back of this Owner's Manual.
When Handset On Base
When Handset Off Base
-
"""""""""",',;
.Q
To answer
a call
$
Press
anykey
Pick up handset.
....
mmi.
Ill-.
-...
a-a
I
To make
a call
1. Pick up the handset.
1.PressTalk/End.
2. PressTalk/End.
2. Listen
3. Listen for the dial tone.
3. Dial the number.
for the dial tone.
4. Dial the number.
~
Z
0
::r::
P-t
~
~
Z
~
:::>
To hang up
Press Talk/End
(AutoStandby).
on the handset, or return the handset to the base
1. Pick up the handset.
2. Press Talk/End.
2. Press Talk/End.
3. Listenfor the dial
3. Listen for the dial tone.
tone.
4.PressRedial
To redial '4. PressRedial Pause.
Pause.
~
Note:
If any key is pressedbeforepressing Redial
numberdialledwillnot redial.
Pause,
the last
13
CALL WAITING
T For Australian
AUSTRALIA
Version
Using the Call Wait feature
The Call Wait + 2 call waiting
procedure
toggles
incoming
and original
(and
between
the
call
visa versa).
The Call Wait
will drop
connection
incoming
+ 1 procedure
the current
call
and pick up the
If the Call Waiting tone sounds, press Call Wait then 2 to accept the
waiting call (Aust only).
-GRTo return to the original caller press Call Wait then 1 (Austonly).
call on hold.
T For New Zealand Version
U sing the Call Wait feature
If the Call Waiting tone sounds during a call, press Call Wait to
NEW
toggle between the incoming call and the original call.
ZEALAND
You need to subscibe
Te1ecom's
to
Call Waiting
Service before you can use this
PAGE
feature.
To locate the handset press Page
for about 15 seconds.
on the Base Unit The handset beeps
c:J
0"""
0"""
TRAVELLING OUT OF RANGE
\
/"
As you begin to move too far from the base, you will first hear a clicking
sound. As you travel further, the noise increases. If you travel
out of range, your call terminates.
PABX CONNECTION
The DS70 telephone may work with a 2-wire Analogue PABX network.
However,with the DS70hook-flashtimingfixed at lOOms(NZ 600ms),
14
some PABX equipment that uses a different hook flash timing may have its
special feature (i.e. placing a call on hold or transferring a call) inaccessible.
.
.-.
STORING
A PHONENUMBER
IN MEMORY
1.
Make surethe handset is in standbymode (In Use lightis OFF).
2.
Press the Memory
button on the handset.(the In Use light will
begin flashing
3.
Enter the phone number,up to 16digits
4.
Press Memory again
5.
Enter the two digitmemory locationnmber (0120) on the keypad(the In Use lightwill stopflashing
and you willhear twoconflfmationbeeps.
6.
Repeatthese stepsto storeadditionalphone numbers.
The pause button counts as
one digit. Pressing
Redial/Pause
~
....
lIIal"'l
a-a
I
PAUSE
FUNCTION
more
than once increases the
length of pause between
numbers.
.,.
-_.-...
In some cases, such as PABX or long distance service, a pause may be needed in the
dialling sequence. Pressing the Redial/Pause
button on the handset inserts a
2 second delaybetween dialled numbers. Pause(s)can be inserted into the programmed
dialling sequence in memory locations.
DIALLINGA
NUMBER
IN MEMORY
.
.
1.
Press Talk/End
2.
Press Memory
3.
Enter the two digit memory location number (01-20).The number
automatically dials.
CHANGING A STORED NUMBER FROM MEMORY
Follow the steps in the section Storing a Phone Number in Memory. The new
phone number will automatically replace the previous one.
15
3 WAY CHAT FUNCTION (CONFERENCING)
While on a call you can make another call to a third person and hold a 3 way
conversation.
T To establish a 3 way chat (conference)
while on a call:
1. Press the Recall button to put the current caller on hold.
2. Wait for dial tone.
3. Dial the third person's phone number.
4. When the third person answersthe call, press the 3-Way Chat button
to connectboth callersto yourself.
T To establish a 3 way chat (conference)
a second incoming call:
while on a call with
1. Press the Call Wait button to put the current caller on hold. This will
also connect the second caller.
2. While talking to the second caller,you can establish a 3 Way Chat by
pressingthe 3 Way Chat button.
T To split up the 3 Way Chat:
1. Press the Call Wait button to put the current caller on hold.
2. To switch between callers, press the Call Wait button.
A
3. To hang up on one caller and return to the caller on hold, press
Recall 1.
Check with your PABX
supplier if you are not sure
whether your PABX network
uses Analogue or Digital
interface.
CHAIN DIALLING
On certain occasions after dialling a number, you may be requested by the
party or service you are calling to enter a special access code, such as when
performing a banking transaction. To store this number, refer to "Storing
Memory Dial Numbers" on page 15.
For example, if your bank's telephone number is stored in handset memory
location 3, and your account number is stored in handset memory location 4:
1. Press Talk/End on the handset.
16
2.
Press Memory on the handset and 3 on the handset keypad.
3.
At the appropriatetime, press Memory and number 4 on the
handset keypad.
4.
Your handset dials the number and you may proceed with your
transaction.
~
Z
0
::q
~
~
~
Z
~
~
'"
If
i
'"'
..,
~
.
-
QUICK REFERENCE CHART
If your phone is not performing to your expectations,
first before calling Uniden customer service-
PROBLEM
..
No dial tone
please try these simple steps
SUGGESTION
Checkthat thephone linecordconnectorsat bothends
are pushed in until they click.
If you havehad a powerfailureor haveunpluggedthe
base unit, replacethe handset on the baseunit for two
,'"
to five seconds to reset the system.
§
Does not ring
Youmay haveexceededthe limitof the number of
phones that can be connectedto the same line, at the
one time.
The maximumis 3.
~
~
No power on the
handset
Checkthe battery pack connection insidethe battery
compartment of the handset.
The handsetrechargableNi-MH batterypackmay need
to be charged.
~
~,
§
o~
Does not charge
Make sure the chargingcontactson both the handset
and the base unit are in contactduring charging.
The chargingcontactsmay need to be cleanedwith an
alcohol-moistenedcloth.
The battery pack mayneed to be dischargedfirstbefore
a fullchargecan be accomplished.
Range is limited
Make sure the base antenna is vertical.
Move thebase unit so that it is centrallylocatedin your
residenceor officeand make sure that the base unit is
not located near appliances.
.11<
I
'!Jii
"
Calls received,
flutter or fade
t
Cannot store or
recall phone
numbers from
memory
The handset
rechargable
battery pack may need charging.
Youmaybe out of normal operatingrange. Movecloser
to the base unit.
When storingphonenumers,make surethat the handset
is in the standby
position.
When recallingstorednumbers,checkfirst fora dial
tone.
~
17
~
z
0
~
~
~
~
z
~
~
~
GENERAL
Australian Specification: The DS70 complies with TSOOl, TSO02, TSO04,
AS/NZS 3260 and FCC Part l5(as per ACA Radio Communications
Class Licensing Requirements).
New Zealand Specification: The DS70 complies with PTC200, RFS 29.
Frequency control: PLL
Modulation:
Direct Sequence Spread Spectrum; DBPSK
Operating temperature: 00 to +500 C
BASE (UNIT,
Frequency: 917.4 to 925.8 MHz (15 channels: Australia)
Frequency: 923.4 to 927.0 MHz (7 channels: New Zealand)
Power requirements:
9V 300mA (from AC adaptor)
Size: 152mm (W) x l83mm (H) x 53.5mm (D)
Weight: Approx. 307g
HANDSET
Frequency: 917.4 to 925.8 MHz (15 channels: Australia)
Frequency: 923.4 to 927.0 MHz (7 channels: New Zealand)
Power requirements:
Rechargeable NiMH battery pack
Size (without antenna): 50mm (W) x l54mm (H) x 27.5mm (D)
Weight: Approx. 136g (including battery)
Battery: Capacity
Talkmode
550mAH,3.6V
4 hours
Standbymode l4days
Specifications, features, and availability of optional accessories are all subject
to change without prior notice.
18
WARRANTY
One Year Limited
Warranty
Important:
Evidence of original purchase is required for warranty service.
Warrantor:
Uniden Australia Pty Limited ACN 001 865498
Uniden New Zealand Limited
ELEMENT
OF WARRANTY:
Uniden warrants to the originalretail owner for
the duration of this warranty,its DS70 (herein after referredto as the Product), to be
free from defectsin materials and craftsmanshipwith only the limitations or exclusions
set out below.
WARRANTY
DURATION:
This warranty to the original retail owner only,
shall terminate and be of no further effect 12 months after the date of original retail
sale. This warranty will be deemed invalid if the product is; (A) Damaged or not
maintained as reasonable and necessary, (B) Modified, altered or used as part of any
conversion kits, subassemblies, or any configurations not sold by Uniden, (C) Improperly
installed, (D) Repaired by someone other than an authorised Uniden Repair Agent for
a defect or malfunction covered by this warranty, (E) Used in conjunction with any
equipment or parts or as part of a system not manufactured by Uniden. (F) Only available
in the original country of sale.
PARTS COVERED:
This warranty covers for one (1) year, the Base/Charging Unit
and Handset only. All accessories (AC Adaptor, Wall mount bracket etc)are covered for
90 days only.
STATEMENT
OF REMEDY:
In the event that the product does not conform
to this warranty at any time while this warranty is in effect, the warrantor at its discretion,
will repair the defect or replace the product and return it to you without charge for parts
or service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY
WAY AFFECT YOUR RIGHTS UNDER THE CONSUMER GUARANTEE ACT.
WARRANTY
CARD: If a warranty card has been included with this product
then please fill it in and return to us within 14 days of purchase. Your name and the
Serial number of the product will then be registered in our database and this will help
us process your claim with greater speed and efficiency should you require warranty
PROCEDURE FOR OBTAINING PERFORMANCE
OR
WARRANTY:
In the event that the product does not conform to this warranty, the
Product should be shipped or delivered, freight pre-paid, with evidence of original
purchase (eg. a copy of the sales docket), to the warrantor at:
UNIDEN
AUSTRALIA
PTY LIMITED
UNIDEN
NEW ZEALAND
LIMITED
SERVICE DIVISION
SERVICE DIVISION
345 Princes Highway,
Rockda1e NSW 2216
East Tamaki, Auckland
Ph (02) 9599 3577 Fx (02) 9599 3278
Toll Free 1300 366 895
Ph (09) 273 8383 Fx (09) 274 4253
Toll Free 0800 4 UNIDEN
150 Harris Road,
(864336)
Customers in other States should ship or deliver the Product freight pre-paid to their nearest
Uniden Authorised Repair Centre (Contact Uniden for the nearest Warranty Agent to you)
19
CONTROLS&FUNCTIONS
0
]jJIJJ
23
1.
Headset Jack
2.
3.
4.
Battery Compartment
In Use LED
Talk/End button
5.
6.
7.
8.
Call Waiting button
3 Way Chat (conference) button
Redial/Pause button
Handset Aerial
9. Low battery/Out of range indicator
10. Volume Control buttons
11. Numeric Keypad
12. Recall Button
20
22
13.
14.
15.
16.
17.
Memory button
Charging Contacts
Handset retainer
Power Indicator LED
In Use LED
18.
19.
20.
21.
22.
23.
Paging LED
Charging LED
Page button
Base Unit Aerial
DC In 9V
Tel Line
8
1
3
9
4
5
6
10
11
2
7
12
13
14
15
21
16
17
18
19
20
21
@ 2001 Uniden Australia Pry Limited
Uniden New Zealand Limited
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement