Rotary Evaporator RC 900 Technical data Data Sheet E 400

Rotary Evaporator RC 900 Technical data Data Sheet E 400
Data Sheet E 400
Rotary Evaporator
RC 900
Technical features
■ Central remote control for all functions
■ Fast and easy change of the flask
■ Automatic lift up of the flask in case of
power outage
■ Operating display of heating bath
Technical data
Material for parts contacting the media
Heating bath
Glass parts
Borosilicate glass
Heating bath temperature [°C]
Vapor tube seal
PTFE compound
Coolant supply parameters (chilled condenser)
Refilling valve‘s fitting
PP
Permissible pressure [bar]
3
Fitting seal
Silicone
Permissible temperature
-15 °C to +20 °C
Plugs seal
PTFE-coated
Coolant-coated surface [cm²]
1230
Coolant line material
20 – 180
Parameters of evaporation flask
Fittings on condenser
PP
Size of evaporation flask
50 – 3000 ml
Fitting seal
Silicone
25 – 250
Connections on tower
brass/galvanized
Rotational speed of evaporation
flask [1/min]
Internal connections
Norprene®, PA, stainless steel
Length of stroke (mm)
150
Lifting speed [mm/s]
38
Tubing
Norprene®
Other data
Vacuum line material
Fitting on condenser
PP
Connections on tower
PVDF, stainless steel
Inner connections
PTFE, PVDF, stainless steel
Tubing
Norprene®
Electrical parameters
Nominal voltage [V]
100 – 127
200 – 240
Frequency [Hz]
50 – 60
Heating output [W]
1300
Max. watt consumption [W]
Total weight [kg]
9.1
Dimensions W x D x H [mm]:
- without glass (footprint)
- with glass
431 x 447 x 464
487 x 447 x 823
Vacuum, coolant, and refill connections GL14
Maximum altitude of installation
[m above sea level]
2000
Remote control unit
Wireless range
approx. 50 m without
obstacles
1500
Power supply
Maximum operating current [A]
100 – 127 V
200 – 240 V
Through integrated batteries
or included power supply
13
6.5
Batteries
4 x AA 1.2 V 2300 mAh;
quick-charge
Protection class
IP20
Battery service life
Up to 12 hours
Charging time
About 7 hours
KNF reserves the right to make technical changes without notice.
KNF 09/2014 Produced in Germany
Data Sheet E 400
Dimensions
Accessories
Description
ID
Protective cover for heating bath
127204
Refill valve
300639
Coolant valve
300853
Protective cover for heating bath
Description
Collection flask (implosion protected)
Evaporation flask NS29/32
Evaporation flask NS24/40
Powder flask NS29/32
Refill valve
Coolant valve
ID
100 ml
300557
500 ml
300591
250 ml
300558
1000 ml
300592
500 ml
128158
2000 ml
300593
1000 ml
113939
Foam brake NS29/32
301114
2000 ml
113938
Foam brake NS24/40
301115
Vacuum seal
113046
50 ml
113079
100 ml
113080
250 ml
113081
500 ml
113082
1000 ml
128159
2000 ml
113083
3000 ml
113084
50 ml
300561
100 ml
300562
250 ml
300563
500 ml
300564
1000 ml
128893
2000 ml
300565
3000 ml
300566
500 ml
300588
1000 ml
300589
2000 ml
300590
Powder flask NS24/40
Combination possibilities
Vacuum pump system SC 920 and chiller C 900
KNF Neuberger GmbH | Alter Weg 3 | D-79112 Freiburg | Tel. +49 (0) 7664 5909 -0 | www.knflab.de | [email protected]
KNF reserves the right to make technical changes without notice.
KNF 09/2014 Produced in Germany
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement