Vacuum control unit VC 900

Vacuum control unit VC 900
Data Sheet E 320
Vacuum control unit
VC 900
Technical features
■
Control of the vacuum application
■
Separate control unit with pressure sensors and
two-step controlled valve to be placed independently
from the operating unit
■
Easy to use
Technical data
Housing materials
Plastic
Total weight [kg]
1.2
Power supply
Power cord, cable length 150 cm
+10 to +40 °C
Protection class
IP30
Permissible media and ambient
temperature
Mains voltage [V]
100 – 240
Installation
Frequency [Hz]
50 / 60
Operating current [A]
max. 1.0
Operating unit can be used as bench-top device providing
3 different display positions
Dimensions W x D x H [mm]
181 x 101 x 67
Operating unit can be mounted at the wall
Accuracy of measurement
± 1 mbar
Measuring limit
upper: 1100 mbar abs.
lower: 0 mbar abs.
Interface
Mini-USB
Control unit
Dimensions W x D x H [mm]
155 x 60 x 109
Hose connections:
- for gas in
- for gas out
- for venting
ID10, PVDF
ID10, PVDF
ID4, nickel-plated brass
KNF Neuberger GmbH | Alter Weg 3 | D-79112 Freiburg | Tel. +49 (0) 7664 5909-0 | www.knflab.de | [email protected]
KNF reserves the right to make chances without notice. KNF 06/2015 Produced in Germany
Other data
Operating unit
Data Sheet E 320
KNF Neuberger GmbH | Alter Weg 3 | D-79112 Freiburg | Tel. +49 (0) 7664 5909-0 | www.knflab.de | [email protected]
KNF reserves the right to make chances without notice. KNF 06/2015 Produced in Germany
Dimensions
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement