null  null
Product information
Pro-Ject Pre Box SE
Pre-amplifier with remote control
Good sound from sound technology
Metal case shields the electronics from vibrational and electromagnetic interference
Optimal channel separation through dual-mono circuitry
Special low-noise ICs used
Gold plated RCA connection sockets
Outboard power supply included
Remote controllable
Small size allows easy placement
Display dimmable
Four line level inputs
Record- and subwoofer output
Remote power switching for connected units via on/off switch (Trigger)
Technical specifications
Frequency response:
Noise floor:
Pre out:
Output voltage typically:
Record and subwoofer out:
Line-level inputs:
Input impedance:
Trigger output:
Outboard power supply:
Power consumption:
Replacement battery remote control:
Dimensions (W x H x D):
20Hz - 20kHz (±0,2 dB)
-94dB (A weighted)
1 pair RCA/Phono sockets
1V at 1kHz
RCA/Phono sockets
4 pairs RCA/Phono sockets
12V DC switching voltage
2-pole 2,5mm ∅ co-axial jack
16V/1.000mA AC, suitable for your country's mains supply
16V/200mA AC
1 x CR 2032 / 3V
103 x 72 x 150mm
1.200g without power supply
The manufacturer reserves the right to alter the technical specifications without notice.
Available in silver or black finish
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697 · © Heinz Lichtenegger · Revision 15.2.10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF