Unpacking

Unpacking
Color Image Scanner
Warnings, Cautions, and Notes
w
Setup
injury.
c
Cautions must be observed to avoid damage to your
4025681-00
XXX
4. The following dialog box appears allowing you to save your scanned
images. First, click the Browse button and specify a folder in which to
save your images. Then select a file format from the File Format list. Click
the Save button to save your images.
To scan using the ] Start button and EPSON Smart Panel, follow these
steps.
Unpacking
1. Make sure the following items are included and not damaged. If any
items are missing or damaged, contact your EPSON dealer
immediately.
1. Open the integrated TPU and place your
document face down on the document
table. Then close the integrated TPU.
2. Remove the packing tape from your scanner, but leave the yellow
sticker in place until instructed to remove it.
Instructions for using the
Smart Panel application.
Specify the path to the
folder in which your images
will be saved.
2. Press the ] Start button on the scanner. After
EPSON Smart Panel automatically opens,
click the
Scan to File icon.
Important!
Leave the yellow sticker
in place until you are
instructed to remove it.
or
Notes contain important information and useful tips on the operation
of your scanner.
equipment.
Your First Scan
English
scanner
(Perfection 1660 Photo)
Warnings must be followed carefully to avoid bodily
Specify a file format.
Note:
If the Scan to File icon does not appear in the
dialog box, you must first click the down arrow
to make the icon appear.
After you specify a file
path and a file format,
click Save to save your
images.
If you choose JPEG as the
file format, you can specify
quality.
The image files are saved in the designated folder. You can now use
the software of your choice to view, edit, or print the images.
scanner
(Perfection 2400 Photo)
Note:
Start button
For help with EPSON Smart Panel, click the question mark in the lower
right corner of the screen.
USB cable
scanner
software CD
Using the Scanner Buttons
power cord
AC adapter
The contents may vary in certain locations.
m
A progress meter appears on the screen and
your photo is automatically scanned.
Installing the Software
3. After your photo is scanned, the Scan to File
dialog box opens. If you want to scan
another photo, place it on the document
table, close the integrated TPU, then click
Scan More. Otherwise, click Finish.
The scanner software CD-ROM contains the EPSON TWAIN driver, software, and electronic manuals.
You must install the software BEFORE connecting the scanner to your computer.
1. Insert the scanner software CD-ROM into the CD-ROM or DVD drive.
Macintosh users:
After inserting the CD-ROM, the EPSON
folder appears on the desktop. (If the
EPSON folder does not appear,
double-click the EPSON icon on the
desktop.) Double-click the EPSON icon
inside the folder.
2. The EPSON Installation Program dialog box
appears. Select Install Software and click
.
Scanned images
appear here. Click
a file name if you
want to change it.
3. Follow the on-screen instructions until all of the software is installed.
When a message appears informing you that installation is complete,
click OK.
4. Restart your computer if a message appears instructing you to do so.
If the EPSON Installation Program dialog
box does not appear, double-click the My
The appearance of dialog boxes
Computer icon. Click the CD-ROM icon,
on this sheet may differ slightly
then select Open from the File menu.
from those on your screen.
Double-click Setup. exe.
For Perfection 2400 Photo users
Click Finish when you are
finished scanning.
To install Adobe ® Photoshop® Elements, insert the Photoshop CD into the
CD-ROM or DVD drive, then follow the on-screen instructions.
Macintosh users:
After inserting the CD-ROM, double-click the Adobe® Photoshop® Elements
icon that appears on the desktop. Then double-click the folder of your
preferred language. and double-click the Adobe® Photoshop® Elements
folder. To begin installation, double-click the installer icon . Then follow
the on-screen instructions.
Scan to E-mail
Scan to Web
Note for Mac OS X users:
You can use the scanner buttons only when in the Classic mode.
3. To view the Reference Guide, click View
Reference Guide. To copy the Reference
Guide to your computer, click Install
Reference Guide.
Viewing the Reference Guide
To learn more about your scanner, see the EPSON Perfection
1260/1660/2400 Reference Guide.
1. Insert the scanner software CD-ROM into the CD-ROM or DVD drive. If
the CD has not been removed since installing the software, remove it
and then insert it again.
Macintosh users:
After inserting the CD-ROM, the EPSON
folder appears on the desktop. (If the
EPSON folder does not appear,
double-click the EPSON icon on the
desktop.) Double-click the EPSON icon
inside the folder.
2. The EPSON Installation Program dialog
box appears. Select User Guides and
click
.
❏ Whenever you unplug the scanner, wait at least 10 seconds
before plugging it back in. Rapidly plugging and unplugging
the scanner can damage it.
Note:
This scanner does not have a power button. It turns on when you
connect the AC adapter and then plug in the power cord.
The scanner turns on and begins to warm
up. The ] Start button blinks green until
the scanner finishes warming up, then
stops blinking and stays green. This
indicates that the scanner is ready for use.
2. Connect the integrated TPU
connector to the scanner's option
connector.
3. Slide the transportation lock all the
way to the right.
Copy
Instructions for using the
Smart Panel application
appear here.
The software will be installed for use in the Classic mode.
Setting Up the Scanner
1. Remove the yellow sticker from the back
of the scanner.
Start
To scan another photo,
place it on the scanner and
then click Scan More.
Note for Mac OS X users:
Note for Windows users:
The Scanner buttons work with EPSON Smart Panel to provide shortcuts to
common scanning functions. You can use them to automatically scan and
print a photo, to attach a photo to e-mail, or to scan and upload photos
to an EPSON photo sharing site on the Web. For more information, see the
Reference Guide included on the scanner software CD-ROM, and the
electronic EPSON Smart Panel Help.
Click this arrow if the Scan to File
icon does not appear.
film holder
Storing the Film Holder
When not using the film holder, you can store it
inside the integrated TPU.
Open the integrated
TPU and remove the
document mat.
Slide the film holder
into the integrated
TPU.
Replace the
document mat.
Note for Windows users:
If the EPSON Installation Program dialog
box does not appear, double-click the My
Computer icon. Click the CD-ROM icon,
then select Open from the File menu. Then,
double-click Setup. exe.
Note:
integrated TPU
connector
transportation lock
option connector
The ] Start button light turns off if you do not use the scanner for 15
minutes.
7. Connect the square connector on the USB cable to the USB port on the
back of the scanner. Then connect the other end of the USB cable to
any available USB port on your computer.
4. Connect the power cord and AC
adapter, as shown.
5. Connect the AC adapter to the DC
inlet on the back of the scanner.
6. Plug the other end of the power
cord into an electrical outlet.
c
Plug this end of the USB
cable into your computer.
Caution:
❏ It is not possible to change
the AC adapter's input or
output voltage. If the label
on the AC adapter does
not show the correct
voltage, contact your
dealer. Do not plug in the
power cord.
USB port
DC inlet
power cord
Note:
AC adapter
❏ Do not connect the scanner through any hubs.
❏ To turn off the scanner, unplug the power cord from the electrical
outlet.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON
CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners. Neither SEIKO EPSON CORPORATION nor its affiliates shall be
liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product,
or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON
CORPORATION. SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as EPSON Approved Products by SEIKO
EPSON CORPORATION. EPSON is a registered trademark of SEIKO EPSON CORPORATION. Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Safety Instructions
Read all these instructions and save them for later reference. Follow all warnings and instructions
marked on the scanner.
c
Caution:
Be sure AC power cord meets the relevant local safety standards.
❏ Place the scanner close enough to the computer for the interface cable to reach it easily. Do not
place or store the scanner or the AC adapter outdoors, near excessive dirt or dust, water, heat
sources, or in locations subject to shocks, vibrations, high temperature or humidity, direct sunlight,
strong light sources, or rapid changes in temperature or humidity. Do not use with wet hands.
❏ Place the scanner and the AC adapter near an electrical outlet where the power cord can be
easily unplugged.
❏ Power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do
not place objects on top of power-supply cords and do not allow the AC adapter, or allow
power-supply cords to be stepped on or run over. Be particularly careful to keep all power-supply
cords straight at the ends and the points where they enter and leave the transformer.
❏ Use only the AC adapter model A171B/E that comes with your scanner. Using any other adapter
could cause fire, electrical shock, or injury.
❏ The AC adapter is designed for use with the scanner with which it was included. Do not attempt
to use it with other electronic devices unless specified.
❏ Use only the type of power source indicated on the AC adapter's label, and always supply power
directly from a standard domestic electrical outlet with the AC power cord that meets the relevant
local safety standards.
❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch
on and off.
❏ If you use an extension cord with the scanner, make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the
total ampere rating of all devices plugged into the electrical outlet does not exceed the electrical
outlet's ampere rating. Do not place multiple loads on the electrical outlet.
❏ Never disassemble, modify, or attempt to repair the AC adapter, power cord, scanner, and option
by yourself except as specifically explained in the scanner's guides.
❏ Do not insert objects into any openings as they may touch dangerous voltage points or short out
parts. Beware of electrical shock hazards.
❏ Unplug the scanner and the AC adapter, and refer servicing to qualified service personnel under
the following conditions:
The power cord or plug is damaged; liquid has entered the scanner or the AC adapter; the scanner
or the AC adapter has been dropped or the case damaged; the scanner or the AC adapter does
not operate normally or exhibits a distinct change in performance. (Do not adjust controls that
are not covered by the operating instructions.)
❏ Unplug the scanner and the AC adapter before cleaning. Clean with a damp cloth only. Do not
use liquid or aerosol cleaners.
❏ If you are not going to use the scanner for a long period, be sure to unplug the AC adapter from
the electrical outlet.
For United Kingdom, Singapore, and Hong Kong users:
Replace fuses only with fuses of the correct size and rating.
For United Kingdom users:
The following safety information applies to the AC adapter.
w
Warning:
Refer to the rating plate for the voltage and check that the appliance voltage corresponds to the supply
voltage.
Important: The wires in the mains lead fitted to this appliance are coloured in accordance with the
following code:
Blue - Neutral
Brown - Live
If you have to fit a plug:
As the colours of the mains lead of this appliance may not match the coloured markings used to
identify the terminals in a plug, please observe the following:
❏ The blue wire must be connected to the terminal in the plug marked with the letter N.
❏ The brown wire must be connected to the terminal in the plug marked with the letter L.
❏ If damage occurs to the plug, replace the cord set or consult a qualified electrician.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement