VENDOR NET TRANSMISSION COVER LETTER

VENDOR NET TRANSMISSION COVER LETTER

VENDOR NET TRANSMISSION COVER LETTER

DATE:

March 22, 2011

When using Vendor Net, you may submit your bid through one of the following options: U.S. mail, handdelivery, fax or email. Refer to “

SUBMITTAL INSTRUCTIONS”.

Regardless of the option used, your bid must be received and time stamped in by Purchasing Services, 21 N Park St, Suite 6101, Madison, WI

53715-1218, prior to 2:00 PM on the bid due date to be considered on time. Bids not so stamped shall be considered late.

Late bids shall be rejected

.

If you have any questions concerning these instructions, please contact the University of Wisconsin-

Madison Purchasing Services (Bid Processing) at (608) 262-0059.

PURCHASING SERVICES

University of Wisconsin-Madison  21 N Park St, Suite 6101 Madison, WI 53715-1218

608/262-0059  (Fax) 608/262-4467  www.bussvc.wisc.edu  [email protected]

University of Wisconsin - Madison

REQUEST FOR BID

THIS IS NOT AN ORDER

OFFICIAL SEALED

CONTRACT NUMBER: 11-5348

ISSUE DATE: 3/22/11

DUE DATE: 4/5/11 2:00 PM CDT

If

NO BID

(check here) and return.

AGENT:

Vint Quamme

Questions regarding this bid

see Section 3.1

For Submittal of Bid Instructions

– see Section #1.

Bid prices and terms shall be firm for sixty (60) days from the date of bid opening, unless otherwise specified in this Request for Bid by the UW-Madison Purchasing

Services.

Unless otherwise noted, public openings will be on the date and time specified. Award(s), if any, will be made as soon thereafter as possible.

The bid abstract will be on file and is open to public inspection only after award determination has been made.

DESCRIPTION

Lathe and Milling Machines

for the period April 15, 2011 (or date of award) through April 14, 2012 or one year after date of award, and will be automatically renewed for 2 additional one-year terms.

In signing this bid, we have read and fully understand and agree to all terms, conditions and specifications and acknowledge that the UW-Madison Purchasing Services bid document on file shall be controlling. We certify that we have not, either directly or indirectly, entered into any contract or participated in any collusion or otherwise taken any action in restraint of free competition; that no attempt has been made to induce any other person or firm to submit or not to submit a bid; that this bid has been independently arrived at without collusion with any other bidder, competitor or potential competitor; that this bid has not been knowingly disclosed prior to the opening of bids to any other bidder or competitor; that the stated statement is accurate under penalty of perjury. I certify that the information I have provided in this bid is true and I understand that any false, misleading or missing information may disqualify the bid.

COMPANY NAME:

COMPANY STREET ADDRESS:

COMPANY CITY, STATE & ZIP:

SIGNATURE: DATE :

TYPE OR PRINT NAME:

TITLE:

TELEPHONE NUMBER: ( ) FAX NUMBER: ( )

EMAIL ADDRESS:

FEIN NUMBER: DUNS #:

UNIVERSITY OF WISCONSIN CONTRACT NO.: 11-5348

TABLE OF CONTENTS

PAGE

SECTION #1: SUBMITTAL INSTRUCTIONS

1-2

SECTION #2: GENERAL INFORMATION

3-5

2.1 Purpose

2.2 Definitions

2.3 Eligible Purchasers

2.4 Affirmative Action

2.5 Wisconsin Sales and Use Tax Registration

2.6 VendorNet

2.7 Orders

2.8 Campus Delivery Requirements

2.9 Parking

2.10 Smoke-Free Environment

2.11 Promotional Materials

2.12 Energy Star

2.13 Supplier Diversity

SECTION #3: RFB PROCESS INSTRUCTIONS

3.1 Clarifications and/or Revisions through Designated Contact

3.2 Contract Term

3.3 Conflict of Interest

3.4 Method of Bid

3.5 Method of Award

SECTION #4: BIDDER QUALIFICATIONS

4.1 Bidder Contact Information

4.2 Bidder Experience

4.3 Authorization

4.4 Client List/References

4.5 Fair Price Analysis

4.6 Minimum Order

4.7 Debarment

SECTION #5: PERFORMANCE AND CONTRACT REQUIREMENTS

5.1 Firm Prices

5.2 F.O.B. Destination, Freight Prepaid and Allowed

–AND-

5.2 F.O.B. Destination Freight Prepaid Included and Installed

-AND-

5.2 On Site Service

5.3 Timeliness of Delivery

5.4 Item Return Policy

5.5 Additional Items/Services

5.6 Acceptance and Testing (Post Award)

5.7 Invoicing Requirements

5.8 Shipments, Duplicates and Overshipments

5.9 Training

5.10 Insurance

5.11 Activity Reports

5.12 Contract Termination

SECTION #6: SPECIFICATIONS

6.2

6.3

Warranty

Subcontracting

6.4 Employee Identification

6.5 On-Site Demonstration

ATTACHMENT A BIDDER RESPONSE SHEET

ATTACHMENT B SPECIFICATIONS/ITEMIZED BID LIST

ATTACHMENT C CLIENT REFERENCE LIST

ATTACHMENT D BIDDER INFORMATION SHEET

ATTACHMENT E STANDARD TERMS AND CONDITIONS

ATTACHMENT F APPLICABLE FEDERAL RULES

6-7

8

9-12

13

14-17

18-20

21

22

23-27

28-30

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

INTRODUCTION

CONTRACT NO.: 11-5348

PAGE 1 OF 30

SECTION #1: SUBMITTAL INSTRUCTIONS

A completed and signed bid response

must

be received and date/time stamped in by UW-Madison Purchasing

Services prior to 2:00 p.m. CDT on the stated bid due date to be considered. Bids not so date/time stamped shall be considered late.

Late bids shall be rejected.

You have been supplied with a pre-addressed return label.

Please fill in your vendor name and address on the return label to help us identify this bid response. Please use one of the options below for return of your bid.

MAILING:

Original and

one (1)

copy of

mailed

bids must be received and date/time stamped at Purchasing Services, 21 N.

Park Street, Suite 6101, Madison, WI 53715-1218, prior to 2:00 p.m. CDT on the stated bid due date.

HAND DELIVERY:

Original and

one (1)

copy of

hand-delivered

bids may be delivered by vendor or third-party/courier service

in a sealed envelope or package. Call 608-262-1526 for assistance upon arrival

. Bids must be received and date/time stamped at Purchasing Services, 21 N. Park Street, Suite 6101, Madison, WI 53715-1218, prior to 2:00 p.m. CDT on the stated bid due date.

FAXING:

Faxed

bids: A complete copy of the

entire response must be completely transmitted and received

and date/time stamped

at Purchasing Services prior to 2:00 p.m.

CDT on the stated bid due date.

FAX: (608) 262-4467

(AVAILABLE 24 HOURS A DAY).

E-MAILING:

E-mailed

bids: A complete copy of the entire response must be received and be available for printing or processing

prior to

2:00 p.m. CDT on the stated bid due date via e-mail to:

[email protected]

.

Submitting a bid to any other e-mail address than

[email protected]

does not constitute receipt of a valid bid by

Purchasing Services. Proof of transmission doesn't constitute proof of receipt.

If the e-mail submission does not contain ACTUAL signatures and initials (not computer generated), then those pages that require signatures and/or initials should be signed and returned via fax (608-262-4467) and should be received prior to 2:00 p.m.

CDT

on the stated due date.

VENDOR NOTE: FOR THE PURPOSES OF THE RETURN ADDRESS LABEL, IF THE ADDRESS IS THE SAME AS YOU

LISTED ON THE REQUEST FOR BID FORM

– YOU DO NOT NEED TO FILL OUT THE RETURN ADDRESS LABEL.

RETURN ADDRESS LABEL:

OFFICIAL SEALED

NUMBER: 11-5348

DUE DATE: 4/5/11 TIME: 2:00 PM CDT

INSERT

VENDOR NAME HERE: ______________________________________

ADDRESS: ________________________________________________

________________________________________________

________________________________________________

UNIVERSITY OF WISCONSIN-MADISON

PURCHASING SERVICES

21 N PARK ST, SUITE 6101

MADISON, WI 53715-1218

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 2 OF 30

1.1 BID RESPONSE REQUIREMENTS:

In order for your bid to be considered, the following forms/information must be completed and submitted as part of your bid response. Failure to provide these forms/information with your bid submittal may disqualify your bid.

1.

2.

Request for Bid Form

(signed)

Bidder Response Sheet (including attachments as requested on Bidder Response Sheet) (Attachment

A)

Specifications/Itemized Bid List, descriptive brochure and detail for the item(s) bid (Section 6) 3.

(Attachment B)

4. Client Reference List (Attachment C)

5.

6.

Bidder Information Sheet (Attachment D)

Standard Terms and Conditions (Attachment E)

7. Applicable Federal Rules (Attachment F)

1.2 PLEASE SEND TWO (2) COMPLETE SETS OF YOUR BID

(If faxing or e-mailing your bid, one copy is sufficient

do not

submit twice).

RETAIN A COPY OF YOUR BID RESPONSE FOR YOUR FILES

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 3 OF 30

SECTION #2: GENERAL INFORMATION

2.1 Purpose:

The University of Wisconsin-Madison, hereinafter referred to as the "University", through its Purchasing

Services Department, hereinafter referred to as "Purchasing," requests bids for the purchase of a Lathe and

Milling Machines with Computer Controls.

Purchase of 2 (two) new-not used Vertical Knee Milling Machines and 1

(one) 17” x 60” Lathe meeting all of the

Specifications attached. The College of Engineering’s Machining Lab currently uses Trak EMX/2 axis controllers on all of its milling machines. These Controllers have been used as a standard for teaching in this laboratory. The COE staff have years of experience operating and maintaining these specific controllers and using them in the Educational Environment.

EMX Retrofit Kits will be installed on the two milling machines (EVS w/10” x 50” tables) will be installed on the machines before they are shipped to the UW or at the COE Machining Lab after delivery.

The University of Wisconsin- Madison College of Engineering intends to order two Milling Machines with

Computer Controls as a result of this contract bid. However, the University does not guarantee to purchase any specific quantity or dollar amount and the number ordered will be based on prices offered and the funding available. Additional machines may be ordered in the future as funding permits..

Conditions of bid which include the word “must” or “shall” describe a mandatory requirement. All specifications are defined as mandatory minimum requirements unless otherwise stated. If no bidder is able to comply with a given specification, condition of bid or provide a specific item/service on the Itemized Bid List, Purchasing reserves the right to delete that specification, condition of bid or item without having to complete the bid process again. FAILURE TO MEET A MANDATORY REQUIREMENT SHALL DISQUALIFY YOUR BID. This contract bid document and the awarded bidder’s (Contractor’s) response information shall become the Contract.

See SPECIFICATIONS and/or ITEMIZED BID LIST for the minimum acceptable specifications for items/services desired. If you are bidding an alternate item, please provide complete specifications, documents and materials showing performance features and details for the items/services you propose to furnish for the items being bid. For alternate items being bid, the Bidder must clearly identify by manufacturer’s name, catalog and model number.

See “Standard Terms and Conditions,” items 1, 2, 3, and 5.1.

Revisions to this bid may be made only by an official written amendment issued by Purchasing.

2.2 Definitions:

The following definitions are used throughout the Special Conditions of Bid:

Agent

means UW Madison Purchasing Agent responsible for this Request for Bid. Full contact information can be found in Section 3.1.

Bidder

means a firm submitting a bid in response to this Request for Bid.

CIC

means Committee on Institutional Cooperation, a consortium of the Big Ten universities plus the University of

Chicago.

COE

means UW Madison College of Engineering.

Contractor

means successful Bidder awarded the bid.

Department

DVB

MBE

means any UW-Madison Department.

means Disabled Veteran-Owned Business.

means Minority Business Enterprise.

P-Card

means Procurement Card (State credit card).

RFB

means Request for Bid.

State

means State of Wisconsin.

University

and

UW

both mean University of Wisconsin-Madison.

WBE

means Woman-Owned Business Enterprise.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 4 OF 30

2.3 Eligible Purchasers:

All University of Wisconsin-Madison campus locations must be eligible to purchase from this contract.

In addition, other U.W. System campuses, State of Wisconsin agencies, Wisconsin municipalities, other CIC member institutions, other Universities in the United States and Non-Profit Organizations specifically linked by their mission to the University of Wisconsin Madison, may desire to purchase from this contract. Bidders should state on the Bidder Response Sheet whether they agree to provide contract items/services to these other locations.

A Wisconsin municipality is defined by Wisconsin Statute 16.70(8) to include counties, cities, villages, towns, school boards, sewage, drainage, vocational, technical and adult education districts, and other bodies with the power to award public contracts.

This contract must not be construed as mandatory upon any University campus, State agency or municipality.

The University reserves the right to issue separate bids when deemed in the best interest of the University.

2.4 Affirmative Action:

As a State agency, the University requires Contractors issued any purchase order exceeding $25,000.00

to provide an Affirmative Action Plan. Failure to comply appropriately with these requirements

may lead to your company being banned from doing business with any agency of the State of Wisconsin

. Additionally, failure to comply with this requirement may result in termination of this contract and withholding of payment. On the Bidder Response Sheet please provide the requested information.

For additional information see Section 17.0 of the Standard Terms and Conditions

( http://www.bussvc.wisc.edu/purch/stdterms1.html

).

Some exceptions may apply. FAQ info is available at: http://www.bussvc.wisc.edu/purch/VendorInfo/AffAction/AffirActionInfo.html

. Instructions for completing a plan are available upon request.

2.5 Wisconsin Sales and Use Tax Registration:

No award can be made to a vendor who is not in compliance with Sec. 77.66 of the Wisconsin State Statutes

( vendornet.state.wi.us/vendornet/wocc/certtax.asp

) relating to sales and use tax certification.

If you have not established a certification for Collection of Sale and Use Tax status with the Wisconsin

Department of Revenue, the University and any other state agency can not issue any purchase orders to your firm. For additional information see http://www.dor.state.wi.us/html/vendlaw.html

2.6 VendorNet:

The State of Wisconsin has implemented a web-based registration system called “

VendorNet

” to enable registered vendors to receive notice of all Official Sealed Bids/Request for Proposals (over $25,000.00) as solicited by all state agencies.

To obtain inf ormation on the state’s bidder registration, please visit the

VendorNet

Web site at http://vendornet.state.wi.us

or call the VendorNet Information Center (1-800-482-7813). In the Madison area, please call 264-7898.

2.7 Orders:

Under this contract, Specific order(s), Contract blanket order(s), or Purchasing Card orders (defined below) may be issued to the Contractor(s). Bidder should identify method by which you will accept orders against this contract (e.g. e-mail, fax, internet, mail, phone, etc.).

2.7.1 Specific order(s): issued as one-time orders.

2.7.2 Contract blanket order(s): issued for a specified period of time, to allow departmental personnel to issue releases against the Contract blanket order(s) as needed.

2.7.3 Purchasing Card order(s): issued as one-time order(s).

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 5 OF 30

2.8 Campus Delivery Requirements:

2.8.1 Delivery of orders shall be made to University departments five days per week, Monday through Friday, during normal University business hours.

2.8.2 The University of Wisconsin-Madison no longer permits access to trucks over 30 ft. in length on several designated streets on this campus. The exceptions are trucks necessary for the delivery or pick up of perishable commodities, private construction vehicles, vehicles carrying radioactive materials, and campus service vehicles. For specific policy language, a campus map and restrictions, see the University

Transportation Services website at http://transportation.wisc.edu/resources/large_truck.aspx

.

2.9 Parking:

University parking is very limited. Each Contractor and/or Contractor employee(s) shall make their own arrangements for parking through UW Transportation Services at 610 N. Walnut Street, WARF Building Room

#120, Madison, WI 53726 (608) 263-6667. No additional Contractor costs will be allowed for parking fees or violations. Unauthorized vehicles parking in University lots or loading docks without permits will be ticketed and/or towed.

2.10 Smoke-Free Environment:

All University buildings are smoke-free buildings.

2.11 Promotional Materials/Endorsements:

Contractor agrees that they will not use any promotional or marketing material which states expressly or implies that the University

endorses

either the Contractor or any party related to the Contractor or this Contract.

2.12 Energy Star:

The State encourages the use of equipment which meets the Environmental Protection Agency (EPA) Energy

Star™ requirements. The Energy Star Program is a voluntary contract between an

Original Equipment

Manufacturer ( OEM) and the EPA. It is not mandatory that every device offered under this bid meet Energy

Star requirements but the bulk of the product line should be energy efficient. Bidder should identify those items which meet the Energy Star requirements on the Bidder Response Sheet.

2.13 Supplier Diversity

2.13.1 Minority Business Enterprise Program (MBE)

The State of Wisconsin is committed to the promotion of minority business in the state's purchasing program and a goal of placing 5% of its total purchasing dollars with certified minority businesses.

Authority for this program is found in ss. 15.107(2), 16.75(4), 16.75(5) and 560.036(2), Wisconsin

Statutes. The University of Wisconsin-Madison is committed to the promotion of minority business in the state's purchasing program.

The State of Wisconsin policy provides that minority-owned business enterprises certified by the

Wisconsin Department of Commerce, Bureau of Minority Business Development should have the maximum opportunity to participate in the performance of its contracts. The supplier/contractor is strongly urged to use due diligence to further this policy by awarding subcontracts to minority-owned business enterprises or by using such enterprises to provide goods and services incidental to this agreement, with a goal of awarding at least 5% of the contract price to such enterprises.

The supplier/contractor shall furnish appropriate information about its effort to achieve this goal, including the identities of such enterprises certified by the Wisconsin Department of Commerce and their contract amount.

A listing of certified minority businesses, as well as the services and commodities they provide, is available from the Department of Administration, Office of the Minority Business Program, 608/267-

7806. The listing is published on the Internet at: http://doa.wi.gov/mbe/minority_search.asp?locid=0

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 6 OF 30

SECTION #3: RFB PROCESS INSTRUCTIONS

3.1 Clarifications and/or Revisions through Designated Contact:

All communications and/or questions in regard to this request should be in writing and must reference the bid number. Bidders are encouraged to FAX or e-mail written questions to the Agent. Verbal questions, when permitted, must be directed to the Agent.

If a Bidder discovers any significant ambiguity, error, conflict, discrepancy, omission or other deficiency in this

RFB, they have

five (5)

business days after the bid issue date and time to notify, in writing, the Agent at the address shown below of such error and request modification or clarification of the RFB document. All written questions will be responded to in writing and provided to all bidders.

ADMINISTRATIVE:

Vint Quamme

UW Purchasing

21 N Park St, Suite 6101

Madison, WI 53715-1218

E-mail: [email protected]

PHONE 608/262-1147 -- FAX 608/262-4467

TECHNICAL: Larry Wheeler

E-mail: [email protected]

PHONE 608/261-1112

If a Bidder fails to notify the Purchasing Office of an error in the RFB document which is known to the Bidder, or which should have reasonably been known to the Bidder, then the Bidder shall submit a bid response at the

Bidder’s risk and if awarded a contract, shall not be entitled to additional compensation or delivery or installation time by reason of the error or its later correction.

In the event that it becomes necessary to provide additional clarifying data or information, or to revise any part of this RFB, amendments and revisions will be provided to all recipients of this initial RFB.

3.2 Contract Term:

The initial term of this contract shall be April 15, 2011

(CONTRACT START DATE)

or date of award, through

April 14, 2012

(CONTRACT END DATE)

or two years after date of award. This contract will be automatically renewed for two additional one-year terms, unless Purchasing is notified, in writing, by the Contractor; or notifies the Contractor, in writing, 30 calendar days prior to expiration of the initial and/or succeeding Contract term(s).

3.3 Conflict of Interest:

By submitting a bid, the bidder certifies that no relationship exists between the bidder and the University that interferes with fair competition or is a Conflict of Interest, and no relationship exists between such bidder and another person or firm that constitutes a Conflict of Interest.

3.4 Method of Bid:

Bidder must submit a

net unit price

and

extended net total

for each item and a total price by

lot

as designated. Prices listed should be in US dollars unless otherwise indicated. Bidders may offer additional

Manufacturer items or accessories at similarly discounted prices to those specifically listed. (See additional lines available on the Itemized Bid List.

-AND-

Custom charges/fees should not be included in the bid price. The University will be responsible for obtaining custom charges/fees and will determine the customs broker to be used for entry into the United States. Failure to eliminate these costs from your bid may result in disqualification of your bid. If these charges are identified in your bid, they will be deducted from your total bid price for award consideration. Custom charges will

not

be paid under any circumstances.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

3.4 Method of Award:

Award(s) shall be made on the basis of the lowest

net lot total

CONTRACT NO.: 11-5348

PAGE 7 OF 30

(s), whichever is judged to be in the best interest of the University. Additional non-listed items or accessories offered by the Bidders will not be considered in the award unless there are tied bids. However items, accessories and prices bid may be used for future purchases. Bids that state the University shall guarantee a specific quantity or dollar amount will be disqualified.

Supplier Diversity Preferences

State of Wisconsin agencies may make awards to certified Minority Business Enterprise (MBE), or Disabled

Veteran-Owned Business (DVB) firms submitting the lowest qualified bid when that qualified bid is not more than 5% higher than the apparent low bid or the proposal is no more than 5% lower than the apparent high point score. Authority for this program is found in ss. 16.75(3m)(b)2,3, 16.75(3m)(c)(4) and 560.0335(1)(b)(3),

15.107(2), 16.75(4), 16.75(5) and 560.036(2), Wisconsin Statutes.

The right is reserved, however, to make an award on the lowest

net unit price

per item for a line item award whichever is judged to be in the best interest of the University.

Award Criteria are as follows:

3.4.1 Volume discounts shall not be considered when determining award. However, they shall apply to orders issued on this contract.

3.4.2 It is intended that the entire award shall be to a single bidder for the manufacturers identified.

However, to insure item(s)/service(s) meet the University’s specifications and will be completed within the time required, the University may award a primary and secondary Contractor.

3.4.3 It is intended that one award per manufacturer shall be made on the specified manufacturer's item.

Alternate manufacturers items, if deemed equivalent by the University, may be awarded as additional product line(s).

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 8 OF 30

SECTION #4: BIDDER QUALIFICATIONS

To be eligible for a Contract award, you must be qualified and able to provide the following as required or your bid will be disqualified

(respond on "Bidder Response Sheet".)

4.1 Bidder Contact Information:

Bidder must designate a person(s) to provide information on: Contract Problems, Contract Renewal/

Cancellation, Invoice Information, Ordering/Expediting, Returns, Supplier Diversity, Affirmative Action and Sales

Representative. (See Attachment A

– Bidder Response Sheet)

4.2 Bidder Experience:

Bidder (company or its principals) must be in the business of providing Lathe and Milling Machine item/service and must have done so for the past 3 years.

4.3 Authorization:

Bidder must be an original manufacturer, authorized distributor, or dealer authorized by manufacturer with service and repair capabilities for the item. On Bidder Response Sheet identify account number with manufacturer, as applicable.

4.4 Client List/References:

Bidder must supply with their bid a client list of three (3) firms to which similar items/services have been provided during the past three (3) years to a comparable sized institution or company (see Attachment C). If contacted, information received from those clients will be used to determine whether bidder can reasonably meet contract requirements and specifications. Client references may be used in the award consideration.

4.5 Fair Price Analysis:

Purchases made under this contract may require further fair price analysis if only one bidder responds. Bidders should identify on the Bidder Response Sheet the type of documentation they will provide (i.e. published price list, list of previous buyers, etc.) to allow the University to complete this analysis. If necessary for the award of the Contract, the awarded Contractor will be required to provide this documentation prior to the order being issued.

4.6 Minimum Order:

Bids that require any minimum order quantity or dollar amount shall be disqualified.

4.7 Debarment

Federal Executive Order (E.O

.) 12549 “Debarment“ requires that all contractors receiving individual awards, using federal funds, and all subrecipients certify that the organization and its principals are not debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded by any Federal department or agency from doing business with the Federal Government. By signing this document you certify that your organization and its principals are not debarred. Failure to comply or attempts to edit this language may disqualify your proposal.

Information on debarment is available at the following websites: www.epls.gov

and https://www.acquisition.gov/far/ .

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 9 OF 30

SECTION #5: PERFORMANCE AND CONTRACT REQUIREMENTS

PRICE LISTS:

All price lists should be submitted via paper copy and CD ROM, Excel, Word or PDF Format.

Referencing your website for pricing information is not sufficient.

5.1 Firm Prices:

5.1.1 Prices must remain firm for the initial contract term. Prices established may be lowered due to changes in general market conditions or negotiations between the Contractor and the University.

5.1.2 Price increase requests proposed after the initial Contract term must be received by Purchasing in writing

30

calendar days prior to the effective date of proposed increase for acceptance or rejection.

Proposed price increases are limited to fully documented cost increases submitted with the request. If

Purchasing deems cost increases are not acceptable, it reserves the right to rebid the contract in whole or part or to negotiate price increase requests with the Contractor. Acceptance of the price increases shall be in the form of an amendment to the contract publication.

5.1.3 Price increases must be labeled with the contract number and should be submitted in the same format as the original Itemized Bid List. Any price increase requested that is not submitted in the proper format may be rejected.

5.2 F.O.B. Destination, Freight Prepaid and Allowed: (vendor responsible for freight costs with ownership changing at UW delivery location) :

For orders that are FOB delivered only: Delivery will be made by common carrier or Contractor’s truck, with unloading to be performed by the carrier/contractor and carton(s) transported to the interior/ground floor or inside dock at various locations. Bid prices must include all packing, freight, insurance charges and installation/operation manuals.

If bidding other than F.O.B. Destination, as stated, F.O.B. point and shipping charges must be identified on the

Itemized Bid List. This cost will be added to the bid total for determining the award.

Delivered Duty Unpaid (DDU). Bidders must include costs from bidders door to port of destination and local delivery charges. The University will be responsible for all United States duty fees, port of entry documentation fees, custom clearance, tax, etc., if applicable.

Please indicate on the Bidder Response Sheet the Country of Origin and Shipping Point.

NOTE:

As necessary, awarded Contractor must use the University's contracted customs broker, to be identified on the purchase order.

Custom duty costs and for ms (if applicable) will be handled by the University through the University’s contracted customs broker. (See Method of Award, Custom Duty Costs.)

Failure to bid FOB DESTINATION, FREIGHT PREPAID AND ALLOWED in bid price or discount may disqualify your bid.

-AND-

5.2 F.O.B. Destination Freight Prepaid Included and Installed:

Items may be required to be installed at various locations, F.O.B. DESTINATION FREIGHT PREPAID

INCLUDED AND INSTALLED. Bid prices must include all packing, freight, insurance, set-up, instruction and operation manual charges. Items must be set in place connected to utilities as applicable, installed in the area designated by University personnel, demonstrated to be in operating condition, and approved by University personnel. All debris must be removed from the University premises and properly disposed of by the

Contractor. Upon installation, all operating instructions and operating and maintenance manuals must be furnished to University personnel as identified.

The Contractor is required to maintain insurance in compliance with "Standard Terms and Conditions 22.0

Insurance" and Section 5.10 below.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 10 OF 30

Delivered Duty Unpaid (DDU). Bidders must include costs from bidders door to port of destination and local delivery charges. The University will be responsible for all United States duty fees, port of entry documentation fees, custom clearance, tax, etc., if applicable.

Please indicate on the Bidder Response Sheet the Country of Origin and Shipping Point.

NOTE:

As necessary, awarded Contractor must use the University's contracted customs broker, identified on the purchase order.

Failure to bid FOB Destination Freight Prepaid Included and Installed in price may disqualify your bid.

-AND/OR-

5.2 On Site Service:

In carrying out the scope of this Contract, the Contractor shall be required to perform services on University property. Bidders cost must include all transportation and insurance charges. The Contractor is required to maintain insurance in compliance with "Standard Terms and Conditions 22.0 Insurance" and Section 5.11 below.

5.3 Timeliness of Delivery:

Delivery is desired as soon as possible after receipt of an order. Please state on the Bidder Response Sheet when delivery can be made. Timeliness of delivery may be used in evaluation for bid award.

The Contractor is required to notify the ordering department of any back order, discontinuation of item(s) or other delays in shipping within 24 hours of receipt of order or release against existing order(s).

5.4 Item Return Policy:

Contractor should provide for return of items ordered in error for up to 30 calendar days from receipt with the

University paying only the return shipping costs. Bidder should indicate in detail on the Bidder Response Sheet their compan y’s return policy.

5.5 Additional Items/Services:

Similar items, equipment, accessories and related services may be added to this Contract provided it was mutually agreeable to both Purchasing Services and the Contractor. Scope of work and pricing (including discounts) must be consistent with the current contract items/services.

5.6

Contractor should promptly notify Purchasing of new or discontinued items.

Acceptance and Testing (Post Award)

Customers may choose to do Acceptance Testing. If so, acceptance testing will occur within 10 days after the equipment has been installed. Acceptance testing will be performed by the University and will consist of verification of the specifications and performance requirements.

If the equipment does not meet specification or performance requirements, the Contractor will have 7 days to meet requirements. If after this time period the equipment still does not meet specifications or performance requirements, the Contractor agrees to remove the equipment and return any payments that may have been made.

The Customers purchasing the equipment or accessories, or his/her designee, is the only authorized person who can sign an acceptance form. The warranty period will begin following the successful acceptance testing.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

5.7 Invoicing Requirements:

CONTRACT NO.: 11-5348

PAGE 11 OF 30

Invoices for Purchase Orders:

5.7.1

Contractor must agree that all invoices and purchasing card charges shall reflect the discounts and net prices established for the items/services on this contract for all orders placed even though the contract number and/or correct prices may not be referenced on each order or at time of purchasing card order.

The University must meet a statutory mandate to pay or reject invoices within 30 days of receipt of properly submitted invoices by University Accounts Payable. Before payment is made, Accounts

Payable must verify that all invoiced charges are correct per this Contract. Only properly submitted invoices will be officially processed for payment. The Prompt Payment Policy requires that your invoices be clear and complete and in conformity with the list below and

must be itemized

showing:

Contractor name

 remit to address

 purchase order number

 release number if given

 date of order/release

 item manufacturer’s name or abbreviation (if applicable)

 complete item description including catalog, model and/or stock number(s) identical to those stated in bid

 prices per the Contract

The original invoice must be sent to University Accounts Payable, 21 N Park St, Suite 5301, Madison,

WI 53715-1218 unless the customer identifies and establishes a different bill-to location.

Purchasing Card:

Order confirmation shall contain the same detail as listed in Section 5.7.1 and should be sent to the address given at the time of the order is placed.

5.7.2 In some cases and at the discretion of the University department customers, final payment may not be made until the item/service meets specifications and has been accepted by the University.

5.8 Shipments, Duplicates and Overshipments:

Upon notification by the University of a duplicated order or overshipment, the items identified must be removed at the Contractor's expense. If the duplicated or overshipment items are not removed within 30 days of written notification, the University reserves the right to dispose of them as its own property and shall not be held liable for any cost for the items.

5.9 Training:

If requested, Contractor must provide personnel with instructions on set-up and operation of the items at no charge to the customer. Training requirements will be negotiated with the Contractor if not specified in the bid specifications.

5.10 Insurance:

The Contractor shall maintain insurance levels as required in Standard Terms and Conditions, Section 22.0. A certificate of insurance must be provided upon request and provided on an annual basis throughout the term of the Contract.

The Contractor shall add:

“The Board of Regents of the University of Wisconsin System, its officers, employees and agents as an

‘additional insured’ under the commercial general, automobile liability policies.

5.11 Activity Reports:

Contractor must be able to report on an annual basis all items/services purchased against this Contract.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 12 OF 30

5.12 Contract Termination:

This Contract may be terminated by either party for the following conditions:

5.12.1 After the initial term of the Contract, the University may terminate the Contract at any time,

without cause

, by providing 15 days written notice to the Contractor. If the Contract is so terminated, the

University is liable only for payments for items/services provided or performed up to the date of the termination.

5.12.2 Shall either party

fail to perform

under the terms of this Contract; the aggrieved party may notify the other party in writing by mail of such failure and demand that the same be remedied within 15 calendar days. Should the defaulting party fail to remedy the same within said period, the other party shall then have the right to terminate this Contract immediately. Performance failure can be defined as but not limited to: improper substitution of products, continuing issues with product quality, continuing issues with proper invoicing, failure to return communication requests on a timely basis or failure to provide any of the Terms, Conditions, Specifications or Special Conditions of Bid.

5.12.3 If at any time the Contractor performance

threatens the health and/or safety

of the University, its staff, students or others who may be on campus, the University has the right to cancel and terminate the Contract without notice.

5.12.4

Failure to maintain the required Certificates of Insurance

, Permits and Licenses shall be cause for Contract termination. If the Contractor fails to maintain and keep in force the insurance as provided in the bid or under Section #22 of the University's Standard Terms and Conditions, the University has the right to cancel and terminate the Contract without notice.

5.12.5 If at any time a petition in

bankruptcy

shall be filed against the Contractor and such petition is not dismissed within 90 calendar days, or if a receiver or trustee of Contractor's property is appointed and such appointment is not vacated within 90 calendar days, the University has the right, in addition to any other rights of whatsoever nature that it may have at law or in equity, to terminate this Contract by giving 10 calendar days notice in writing of such termination.

5.12.6 All notices of performance failure must be submitted in writing to Purchasing, 21 N Park St, Suite

6101, Madison, WI 53715-1218. Purchasing shall be final authority for all performance failure determinations not resolved through the ordering department.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 13 OF 30

SECTION #6 SPECIFICATIONS

SPECIFICATIONS OF ITEMS TO BE PROVIDED: (see ATTACHMENT B)

See SPECIFICATIONS and/or ITEMIZED BID LIST for the minimum acceptable specifications for items/services desired.

Failure to provide product specifications and information for item(s) bid may disqualify your bid. The University will be the sole judge of equivalent acceptability between bidders responses.

UW Specifications may not be revised without an official written amendment issued by Purchasing.

6.1 Specific manufacturer(s) and/or catalog/model/stock numbers are provided to establish the design, type of construction, quality, functional capability and performance level desired. The bidder may offer an alternate item believed to be an equal. Any alternate item bid must be clearly identified by manufacturer, catalog, model or stock number. Adequate detailed specifications (including brochures, operating manuals, maintenance manuals or other written materials) of any alternate item offered must be included with your bid to establish equivalency.

-AND-

6.1

The manufacturer’s items shown on the ITEMIZED BID LIST are currently being used at UW-Madison. Bidder may offer an alternate manufacturer item believed to be an equal to those listed. Any alternate item(s) bid must be clearly identified by manufacturer and catalog, model or stock number. Adequate detailed specifications of the alternate item offered must be included with your bid to establish equivalency and to insure that the item being bid meets all specifications.

6.2 Warranty:

6.2.1 Contractor must honor, at a minimum, the manufacturer's standard warranty on items and/or parts purchased under this contract. Bidder must indicate warranty term on Bidder Response Sheet and should enclose standard warranty documents with your bid.

6.3 Subcontracting:

6.3.1 Any Contract resulting from this proposal shall not be, in whole or in part, subcontracted, assigned, or otherwise transferred to any Subcontractor without prior written approval by Purchasing. Upon request

Contractor must provide Subcontractor’s complete contact information including EIN# (TIN#, SS#) and signed W-9 form.

6.3.2 The Contractor shall be directly responsible for any subcontractor's performance and work quality when used by the Contractor to carry out the scope of the job. University reserves the right to assess

Contractor Liquidated Damages in excess of the contract amount for Subcontractor’s failure to perform or inability to complete required project milestones.

6.3.3 Subcontractors must abide by all terms and conditions under this Contract.

6.3.4 If Subcontractors are to be used, the Contractor must clearly explain their participation, deliverables, and project milestones prior to commencing work.

6.4 Employee Identification:

All C ontractor’s employees, while working on University property, must wear a clearly displayed photo identification badge or uniform showing name of employee and/or company represented. Any identification must be provided by the Contractor at the Contractor’s cost.

6.5 On-Site Demonstration:

An on-site demonstration of any product may be required for evaluation purposes. This demonstration is to be without expense or obligation to the University. The University will not be liable for any loss or damage. If requested, the demonstration must occur within 14 working days or as negotiated with the Contractor.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 14 OF 30

ATTACHMENT A: BIDDER RESPONSE SHEET

NOTE:

This form

must be returned

with your bid response. Numbers identified correspond to those Sections shown in the

SPECIAL CONDITIONS OF BID

. Bidder may attach additional relevant information to their bid response; identify sections to which information applies.

2.7

SUPPLIER DIVERSITY PARTICIPATION

:

Bidder understands that if they are awarded the contract, they agree to provide upon request, information related to their Supplier Diversity expenditures related to this contract?

YES NO

=======================================================================================

Terms and Conditions

A contract will be awarded based on the criteria established in this bid. The Specifications, Special and Standard

Terms and Conditions, Attachments to the bid document, Bidder response and any UW Madison Purchase Order will become the Contract between the University and the Contractor. Bidder must accept these Specifications, Special and Standard Terms and Conditions or submit detailed and defined exceptions along with proposed alternative or additional language for each exception.

Submitting a standard Bidder Contract as a complete substitute or alternative for the language in this solicitation will not be accept ed and may result in rejection of the vendor’s bid.

The University reserves the right to negotiate contractual terms and conditions or reject the Bidder’s response and proceed to the next qualified bidder.

=======================================================================================

1.1 Have you completed and returned all forms required?

1.2

2.3

Have you included

two (2)

complete sets of your bid?

(only one (1) copy required if faxing or e-mailing)

Do you agree to extending the contract to other:

University of Wisconsin System campuses?

State of Wisconsin Agencies?

Wisconsin Municipalities?

Other CIC member institutions?

Non-Profit Organizations specifically linked by their mission to the

University of Wisconsin Madison?

If

YES

, indicate whether other charges will be added and what those charges would be: ___________________________________________________

What order method will you accept orders against this contract:

E-mail

Fax

Internet

Mail

Phone

Other: ______________________________________________

2.12 Which of your products meet the Energy Star requirements?

_______________________________________________________

_______________________________________________________

_______________________________________________________

4.2

4.3

4.4

4.6

4.7

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

4.1

CONTRACT NO.: 11-5348

PAGE 15 OF 30

YES NO

Bidder must designate a person(s) to provide information on: Contract Problems, Contract

Renewal/Cancellation, Invoice Information, Ordering/Expediting, Returns, Supplier Diversity Reporting,

Affirmative Action, Questions on this RFB and Sales Representative.

Contract Problems

CONTACT NAME PHONE NUMBER FAX NUMBER

Contract Renewal/Cancellation

Invoice Information

Ordering/Expediting

Returns

SUPPLIER DIVERSITY

REPORTING:

Address:

E-mail:

CONTACT NAME PHONE NUMBER FAX NUMBER

AFFIRMATIVE ACTION:

Address:

E-mail:

CONTACT NAME PHONE NUMBER FAX NUMBER

QUESTIONS ON THIS RFB:

Corporate Address:

E-mail:

CONTACT NAME PHONE NUMBER FAX NUMBER

SALES REPRESENTATIVE:

E-mail:

Website:

CONTACT NAME PHONE NUMBER FAX NUMBER

Are you in the business of providing Milling Machine and Lathe items/services and has your company or its principals done so for the past 3 years

Account # ___________________________

Have you provided a client list?

?

Are you an original manufacturer, authorized distributor, or dealer authorized by

manufacturer with service and repair capabilities for the item?

(Identify account number with manufacturer, as applicable.)

Do you agree to no minimum order quantity or dollar amount?

Do you certify that neither your organization nor your principals are presently debarred,

suspended, proposed for debarment, declared ineligible, or voluntarily excluded from

participation in this transaction by any federal department or agency?

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

Firm Prices

5.1.1 Do you agree to firm prices as stated?

CONTRACT NO.: 11-5348

PAGE 16 OF 30

5.1.2 Do you agree with process and timeframe identified for accepting price increases?

5.2 Are you bidding all prices F.O.B. Destination, Freight Prepaid and Allowed?

(Be sure to read Section 5.2 carefully)

5.12

6.2

5.8

5.9

5.10

5.2

Country of Origin ___________________________________________

Shipping Point ____________________________________________

As necessary, are you bidding all prices F.O.B. Destination Freight Prepaid Included and

Installed. (Be sure to read Section 5.2 carefully)

Country of Origin ___________________________________________

Shipping Point ____________________________________________

5.2

Are you bidding all prices On Site Service? (Be sure to read Section 5.2 carefully)

5.3 Please state delivery time ____ days After Receipt of Order (ARO).

Will you notify ordering department of backorders, discontinuation or delays as stated?

5.4 Do you agree with return policy? If not, state your return policy in detail.

5.7 Will you agree that all invoices will reflect prices established for items on this Contract for all orders placed even though the Contract number and/or correct prices may not be referenced on each order?

Will you accept orders placed using a Purchasing Card?

If

YES

, orders placed using a Purchasing Card must reflect current contract pricing.

Any fees charged for use of the University’s Purchasing Card program are not allowed according to Visa Purchasing card rules.

Do you agree to terms regarding duplicates and overshipments?

Will you provide instructions on set-up and operation as required?

Will you provide insurance certificate(s) indicating coverage and agree to maintain coverage as required in 5.10 and will you add the following language to the insurance certificate?:

“The Board of Regents of the University of Wisconsin System, its officers, employees and agents are added as an ‘additional insured’ under the commercial general, automobile (and

Contractor’s) liability policies on any insurance certificate provided”.

Can you report on items purchased on this contract if requested?

Will you honor manufacturer standard warranty?

If

YES

, have you enclosed standard warranty documents?

Warranty term: __________________

YES NO

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

6.3

6.4

Do you agree to subcontracting terms and conditions?

CONTRACT NO.: 11-5348

PAGE 17 OF 30

Will you agree to have all employees wear appropriate identification?

YES NO

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 18 OF 30

ATTACHMENT B: SPECIFICATIONS/ITEMIZED BID LIST

FOR MILLING MACHINES AND LATHES

The University of Wisconsin, College of Engineering is requesting bids for the purchase of two (2) new, not-used

Vertical Knee Milling Machines and one

(1) 17” x 60” Lathe that meets or exceeds all of the specifications listed below.

Bidders should note in their response whether the manufacturer being bid meets or exceeds the specifications listed.

For all “NO” answers, the bidder must provide brochures, and product manuals or other materials that will show how the difference in specification will affect the performance and use of the machine being bid.

Delivery of the Milling Machines and Lathe to Reynolds Transfer, 725 E. Mifflin St., Madison, Wisconsin by

June 15, 2011

For more information contact Larry Wheeler at (608) 261-1112 [email protected]

.

Note: Eisen S

3A2 Vertical Knee Milling Machine w/10” x 50” Table is known to meet the Specifications listed.

ITEM DESCRIPTION

MEET

SPECIFICATIONS

YES NO

1 New Vertical Knee Milling Machine

EVS Milling Head - 0 - 4500 RPM Yaskawa Drive

Motor Type - Inverter-Type Variable Speed Drive w/ Digital Readout

Motor Power - 3 HP

Spindle Taper - R8

Quill Travel - 5 Inches - CHROMED QUILL

Quill Diameter - 3.375 Inches

Quill Power Feeds - 0.0016", 0.0032" & 0.0059" per Rev.

Power Requirements - 220Volt 3 Phase

Yaskawa Varialble Frequency Drive - Japanese Made

True Back Gear In Drive

Mill Spindle is Hardened, Precision Ground and Chromed

Spindle is supported by preloaded (ABEC-7) bearings

3 Bearing Support Head Design - This head design uses a 3rd Ball

Bearing to support the drive pulley at the end of the motor shaft.

High Precision - Spindle run out under 0.0002 inches

Meehanite Casting

10" x 50" Table

15.5" Cross Travel (Y) - SQUARE WAY

Vertical Travel Of Knee 16"

Precision hardened & ground table & ways

Hand Scraped saddle

Adjustable backlash

Turcite-B slide ways on X & Y axis

One Shot Lubrication system

Chip Cover

Tool box w/tools

Built-in coolant tank

Draw Bar

Additional Accessories:

Servo Made

– Power Feed 200 for Z axis (Installed)

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 19 OF 30

ATTACHMENT B: SPECIFICATIONS/ITEMIZED BID LIST (Continued)

ITEM DESCRIPTION

2

Lathe with 17” Swing x 60” between centers

7.5 HP EVS w/Yaskawa Inverter Drive

– 220 Volt 3 Phase

3” Spindle Bore (D1-8)

Steady Rest

Follow Rest

Face Plate

Chuck Cover

Full length splash guard

Halogen work light

Coolant System

Center spindle sleeve w/Dead center

Plastic Safety Drive Gear

– Spindle Drive Safety Device

10” Bison Set-Thru 6 Jaw chuck w/back plate (D1-8)

12” 4-Jaw chuck (D1-8)

Lever type 5C collet closer

– Installed

Micro Carriage Stop

Foot Brake

Back Plate (D1-8)

– for 8” chuck

MEET

SPECIFICATIONS

YES NO

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 20 OF 30

ATTACHMENT B: SPECIFICATIONS/ITEMIZED BID LIST (Continued)

Item #1 Vertical Knee Milling Machine:

Bidding Manufacturer: Model Number:

Unit Price: ___________________ x 2 = $____________________

Vendor Name: ________________________ Phone No. ________________________

Contact Person: _______________________ Fax No. ___________________________

Date: ______________________________

Item #2 Lathe with 17” Swing 60” between Centers:

Bidding Manufacturer:

Unit Price: ___________________

Model Number:

Vendor Name: ________________________ Phone No. ________________________

Contact Person: _______________________ Fax No. ___________________________

Date: ______________________________

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 21 OF 30

ATTACHMENT C - CLIENT REFERENCE LIST

Bidder Name:____________________________________________________________________________________

The Bidder must provide a minimum of three (3) business references.

1. Reference Name: _____________________________________________ Contact: ___________________________

Address: _____________________________________________________________________________________________

Phone #: ( ) ____________________ E-mail address_______________________________________________________

Fax/Internet address:____________________________________________________________________________________

Description and date(s) of commodities and services provided: __________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

2. Reference Name: _____________________________________________ Contact: ___________________________

Address: _____________________________________________________________________________________________

Phone #: ( ) ____________________ E-mail address_______________________________________________________

Fax/Internet address:____________________________________________________________________________________

Description and date(s) of commodities and services provided: __________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

3. Reference Name: _____________________________________________ Contact: ___________________________

Address: _____________________________________________________________________________________________

Phone #: ( ) ____________________ E-mail address_______________________________________________________

Fax/Internet address:____________________________________________________________________________________

Description and date(s) of commodities and services provided: __________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

References may be contacted to confirm the Bidder

’s abilities and qualifications as stated in the Bidder’s response. The University may perform due diligence by contacting any applicable business reference, including references from within the UW System. The University reserves the right to disqualify any Bidder whose referen ces don’t support their stated claim of qualifications in their response.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 22 OF 30

ATTACHMENT D: BIDDER INFORMATION SHEET

VENDOR NOTE: THIS SECTION MUST BE COMPLETED AND THIS FORM RETURNED WITH YOUR

BID RESPONSE

1. In accordance with

Wisconsin Statutes

560.035, 560.0335 and 560.036, please indicate below if you are a Wisconsin certified Minority Business Enterprise (MBE), Work Center (WC), Disabled Veteran-Owned

Business (DVB) or Woman-owned Business Enterprise (WBE) (see websites:

http://www.commerce.state.wi.us/bd/BD-MinorityandWomen.html

or

http://stateuseprogram.wi.gov/section.asp?linkid=1424&locid=65

).

____ Minority (MBE) ____ Work Center (WC) ____Disabled Veteran-Owned Business (DVB)

____ Woman Owned Business Enterprise (WBE) ___ Not applicable

(If no answer is indicated above, we will assume that you are none of the above when making the award.)

2.

Pursuant to Public Law 95-507

, indicate which of the following classifications apply to your organization. All vendors are considered Large Business unless otherwise indicated (see website:

www.sba.gov/

). (

Check √ all that apply

.)

____________ LARGE BUSINESS (LG)

____________ SMALL BUSINESS (SB)

____________ VETERAN OWNED SMALL BUSINESS (VOSB)

____________ SERVICE DISABLED VETERAN OWNED SMALL BUSINESS (SDVOSB)

____________ HISTORICALLY UNDER UTILIZED BUSINESS ZONE (HUBZONE)

____________ SMALL DISADVANTAGED BUSINESS (SDB)

____________ WOMAN-OWNED SMALL BUSINESS (WOSB)

3.

AMERICAN MADE: Wisconsin Statutes S. 16.754

, directs the state to purchase materials which are manufactured to the greatest extent in the United States when all other factors are substantially equal.

“Substantially equal” means when bids are tied or proposal scores are equal. Indicate whether the material covered in your bid/proposal were manufactured in whole or in substantial part within the

United States, or the majority of the component parts thereof were manufactured in whole or in substantial part in the United States.

____________ YES ____________ NO ____________ UNKNOWN

4.

RECYCLED PRODUCTS/PACKAGING/DISPOSAL TECHNIQUES:

The University is committed to promote environmentally sound procurement, usage and disposal methods which are in compliance with

State of Wisconsin County, and Municipal regulations. Currently the University has a recycling program for starch and Styrofoam packing peanuts. The University’s preference is to receive starch peanuts whenever possible. The Contractor shall not use INSTAPAK

(or similar) or mix starch and Styrofoam peanuts under any circumstances. Each product shall be separately pre-packed in accordance with commercially accepted methods. Small products may be packaged in protective envelopes (Mail-Lite or

Bubble-Jet packs).

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 23 OF 30

ATTACHMENT F: STANDARD TERMS AND CONDITIONS

1.0

SPECIFICATIONS:

The specifications in this request are the minimum acceptable. When specific manufacturer and model numbers are used, they are to establish a design, type of construction, quality, functional capability and/or performance level desired. When alternates are bid/proposed, they must be identified by manufacturer, stock number, and such other information necessary to establish equivalency.

The UW-Madison shall be the sole judge of equivalency. Bidders/proposers are cautioned to avoid bidding alternates which may result in rejection of their bid/proposal.

2.0

DEVIATIONS AND EXCEPTIONS:

Deviations and exceptions from original text, terms, conditions, or specifications shall be described fully, on the bidder's/proposer's letterhead, signed, and attached to the request. Each deviation and exception must be identified by the section, page and paragraph to which it applies. In the absence of such statement, the bid/proposal shall be accepted as in strict compliance with all terms, conditions, and specifications and the bidder/proposer shall be held liable.

3.0

QUALITY:

Unless otherwise indicated in the request, all material shall be first quality. Items which are used, demonstrators, obsolete, seconds, or which have been discontinued are unacceptable without prior written approval by the University.

4.0

QUANTITIES:

The quantities shown on this request are based on estimated needs. The University reserves the right to increase or decrease quantities to meet actual needs.

5.0

PRICING AND DISCOUNT:

The University qualifies for governmental discounts and its educational institutions also qualify for educational discounts. Unit prices shall reflect these discounts.

5.1 Unit prices shown on the bid/proposal or contract shall be the price per unit of sale (e.g., gal., cs., doz., ea.) as stated on the request or contract. For any given item, the quantity multiplied by the unit price shall establish the extended price, the unit price shall govern in the bid/proposal evaluation and contract administration.

5.2 Prices established in continuing agreements and term contracts may be lowered due to general market conditions, but prices shall not be subject to increase for ninety (90) calendar days from the date of award. Any increase proposed shall be submitted to the University thirty (30) calendar days before the proposed effective date of the price increase, and shall be limited to fully documented cost increases to the Contractor which are demonstrated to be industry-wide. The conditions under which price increases may be granted shall be expressed in bid/proposal documents and contracts or agreements.

5.3 In determination of award, discounts for early payment will only be considered when all other conditions are equal and when payment terms allow at least fifteen (15) days, providing the discount terms are deemed favorable. All payment terms must allow the option of net thirty (30).

6.0

UNFAIR SALES ACT:

Prices quoted to the University are not governed by the Wisconsin Unfair Sales

Act.

7.0

ACCEPTANCE-REJECTION:

The University reserves the right to accept or reject any or all bids/proposals, to waive any technicality in any bid/proposal submitted, and to accept any part of a bid/proposal as deemed to be in the best interest of the State of Wisconsin.

8.0

ORDERING:

Purchase orders or releases via purchasing cards shall be placed directly to the Contractor by University. No other purchase orders are authorized.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 24 OF 30

9.0

PAYMENT TERMS AND INVOICING:

The University normally will pay properly submitted vendor invoices within thirty (30) days of receipt providing goods and/or services have been delivered, installed (if required), and accepted as specified.

9.1 Invoices presented for payment must be submitted in accordance with instructions contained on the purchase order including reference to purchase order number and submittal to the correct address for processing. Invoice payment processing address is shown on the upper left corner of the purchase order. Send invoices to the Accounts Payable address on the purchase order. Do not send invoices to the ship to address.

9.2 Payment shall be considered timely if the payment is mailed, delivered, or transferred within thirty

(30) days after receipt of a properly completed invoice, unless the vendor is notified in writing by the agency of a dispute before payment is due.

9.3 Bidders/proposers shall include discounts for early payment (See 5.3) as a percent reduction of invoice. Invoice discounts shall be determined, where applicable, from the date of acceptance of goods and/or the receipt of invoice, whichever is later. Discounts for early payment terms stated on the bid/proposal must be shown plainly on the invoice; discounts for early payment not shown on the invoice will be taken.

9.4 Invoices submitted not in accordance with these instructions will be removed from the payment process and returned within ten (10) days.

9.5 Payment terms and invoicing for purchasing card will be made in accordance with the purchasing card contact.

10.0

TAXES:

The University, an agency of the State of Wisconsin, is exempt from payment of all federal tax and Wisconsin state and local taxes on its purchases except Wisconsin excise taxes as described below.

The Department of Revenue of the State of Wisconsin does not issue a tax exempt number; however,

University is exempt from State of Wisconsin sales or use tax under s.77.54(9a)(a). Registration No. 39-

73-1021-K, was issued by the Internal Revenue Service to authorize tax-free transactions under Chapter

32 of the Internal Revenue Code.

10.1 The University, an agency of the State of Wisconsin, is required to pay the Wisconsin excise or occupation tax on its purchase of beer, liquor, wine, cigarettes, tobacco products, motor vehicle fuel and general aviation fuel. However, it is exempt from payment of Wisconsin sales or use tax on its purchases. The University may be subject to other states' taxes on its purchases in that state depending on the laws of that state. Contractors performing construction activities are required to pay state use tax on the cost of materials.

11.0

GUARANTEED DELIVERY:

Failure of the Contractor to adhere to delivery schedules as specified or to promptly replace rejected materials shall render the Contractor liable for all costs in excess of the contract price when alternate procurement is necessary. Excess costs shall include the administrative costs.

12.0

ENTIRE AGREEMENT:

These Standard Terms and Conditions shall apply to any contract or order awarded as a result of this request except where special requirements are stated elsewhere in the request; in such cases, the special requirements shall apply. Further, the written contract and/or order with referenced parts and attachments shall constitute the entire agreement and no other terms and conditions in any document, acceptance, or acknowledgment shall be effective or binding unless expressly agreed to in writing by the University.

13.0

APPLICABLE LAW:

This Agreement shall be construed under the laws of the State of Wisconsin.

Jurisdiction and venue for any disputes under this Agreement shall be in Dane County, Wisconsin. The contractor shall at all times comply with and observe all federal and state laws, local laws, ordinances and regulations which are in effect during the period of this contract and which in any manner affect the work or its conduct .

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 25 OF 30

14.0

ANTITRUST ASSIGNMENT:

The Contractor and the University recognize that in actual economic practice, overcharges resulting from antitrust violations are in fact usually borne by the purchaser.

Therefore, the Contractor hereby assigns to the University any and all claims for such overcharges as to goods, materials or services purchased in connection with this contract.

15.0

ASSIGNMENT:

No right or duty in whole or in part of the Contractor under this contract may be assigned or delegated without the prior written consent of the University.

16.0

DISPUTES:

Disputes should be addressed to the University Purchasing Office, Director of Purchasing

Services, 21 N Park St, Suite 6101, Madison, WI 53715 1218.

17.0

NONDISCRIMINATION/ AFFIRMATIVE ACTION:

17.1 In connection with the performance of work under this contract, the Contractor agrees not to discriminate against any employe or applicant for employment because of age, race, religion, color, handicap, sex, physical condition, developmental disability as defined in s.51.01(5), Wisconsin

Statutes, sexual orientation as defined in s.111.32(13m) Wis. Stats., or national origin. This provision shall include, but not be limited to, the following: employment, upgrading, demotion or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. Except with respect to sexual orientation, the Contractor further agrees to take affirmative action to ensure equal employment opportunities.

17.2 Contracts estimated to be over twenty-five thousand dollars ($25,000) require the submission of a written affirmative action plan by the Contractor

.

An exemption occurs from this requirement if the

Contractor has a workforce of less than twenty-five (25) employes. Within fifteen (15) working days after the contract is awarded, the Contractor must submit the plan to the contracting state agency for approval

.

Instructions on preparing the plan and technical assistance regarding this clause are available from the contracting state agency.

17.3 The Contractor agrees to post in conspicuous places, available for employes and applicants for employment, a notice to be provided by the contracting state agency that sets forth the provisions of the State of Wisconsin nondiscrimination law.

17.4 Failure to comply with the conditions of this clause may result in the Contractor's becoming declared an "ineligible" Contractor, termination of the contract, or withholding of payment.

17.5 To the extent required by law, 41 CFR 60-1.4(a) and (b) are incorporated by reference in these

Standard Terms and Conditions. Additionally, the Contractor certifies compliance with 41 CFR 60-

1.8 and does not and will not maintain any facilities provided for employees in a segregated manner.

The Contractor further agrees to obtain identical certifications from any subcontractors prior to the award of a subcontract exceeding $25,000 which is not exempt and will retain such certification for audit purposes.

18.0

PATENT INFRINGEMENT:

The Contractor selling to the University the articles described herein guarantees the articles were manufactured or produced in accordance with applicable federal labor laws.

Further, that the sale or use of the articles described herein will not infringe any United States patent.

The Contractor covenants that it will at its own expense defend every suit which shall be brought against the University (provided that such Contractor is promptly notified of such suit, and all papers therein are delivered to it) for any alleged infringement of any patent by reason of the sale or use of such articles, and agrees that it will pay all costs, damages, and profits recoverable in any such suit.

19.0

SAFETY REQUIREMENTS:

All materials, equipment, and supplies provided to the University must comply fully with all safety requirements as set forth by the Wisconsin Administrative Code, Rules of the

Industrial Commission on Safety, and all applicable OSHA Standards.

20.0

MATERIAL SAFETY DATA SHEET:

If any item(s) on an order(s) resulting from this award(s) is a hazardous chemical, as defined under 29CFR 1910.1200, provide one (1) copy of a Material Safety Data

Sheet for each item with the shipped container(s) and one (1) copy to UW Safety Department, 30 East

Campus Mall, Madison WI 53715-2609.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 26 OF 30

21.0

WARRANTY:

Unless otherwise specifically stated by the bidder/proposer, equipment purchased as a result of this request shall be warranted against defects by the bidder/proposer for one (1) year from date of receipt. The equipment manufacturer's standard warranty shall apply as a minimum and must be honored by the Contractor.

22.0

INSURANCE RESPONSIBILITY:

The Contractor performing services to the University shall:

22.1

Maintain worker's compensation insurance as required by Wisconsin Statutes for all employees engaged in the work.

22.2 Maintain commercial liability, bodily injury and property damage insurance against any claim(s) which might occur in carrying out this agreement/contract. Minimum coverage shall be one million dollars ($1,000,000) liability for bodily injury and property damage including products liability and completed operations. Provide motor vehicle insurance for all owned, non-owned and hired vehicles that are used in carrying out this contract. Minimum coverage shall be one million dollars

($1,000,000) per occurrence combined single limit for automobile liability and property damage.

22.3 The state reserves the right to require higher or lower limits where warranted.

22.4 Upon request by the University, the Contractor is required to provide a Certificate of Insurance, from an insurance company licensed to do business in the State of Wisconsin, with a minimum AM Best rating of A-, and signed by an authorized agent. A minimum 60 day cancellation notice is desired.

23.0

CANCELLATION:

The University reserves the right to cancel any contract in whole or in part without penalty due to nonappropriation of funds or for failure of the Contractor to comply with terms, conditions, and specifications of this contract.

24.0

VENDOR TAX DELINQUENCY:

Vendors who have a delinquent Wisconsin tax liability may have their payments offset by the State of Wisconsin.

25.0

OMNIBUS RECONCILIATION ACT:

(Public Law 96-499) To the extent required by law, if this contract is for acquisition of services with a cost or value of $25,000 or more within any 12-month period, including contracts for both goods and services in which the services component is worth $25,000 or more within any 12-month period, the Contractor shall in accordance with 42 C.F.R., Part 420, Section 1861 of the

Omnibus Reconciliation Act of 1980 (P.L. 96499) and permit the comptroller general of the United States, the United States Department of Health and Human Services, and their duly authorized representatives, access to the Contractor's books, documents and records until the expiration date of four (4) years after the approval of procurement activities.

26.0

PUBLIC RECORDS ACCESS:

It is the intention of University to maintain an open and public process in the solicitation, submission, review, and approval of procurement activities. Bid/proposal openings are public unless otherwise specified. Records may not be available for public inspection prior to issuance of the notice of intent to award or the award of the contract.

27.0

PROPRIETARY INFORMATION:

Any restrictions on the use of data contained within a request must be clearly stated in the bid/proposal itself. Proprietary information submitted in response to a request will be handled in accordance with applicable State of Wisconsin procurement regulations and the Wisconsin public records law. Proprietary restrictions normally are not accepted. However, when accepted, it is the vendor's responsibility to defend the determination in the event of an appeal or litigation.

27.1 Data contained in a bid/proposal, all documentation provided therein, and innovations developed as a result of the contracted commodities or services cannot be copyrighted or patented. All data, documentation, and innovations become the property of the State of Wisconsin.

27.2 Any material submitted by the vendor in response to this request that the vendor considers confidential and proprietary information and which qualifies as a trade secret, as provided in s.

19.36(5), Wis. Stats., or material which can be kept confidential under the Wisconsin public records law, must be identified on a Designation of Confidential and Proprietary Information form (DOA-

3027). Bidders/proposers may request the form if it is not part of the Request for Bid/Request for

Proposal package. Bid/proposal prices cannot be held confidential.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 27 OF 30

28.0

DISCLOSURE:

If a state public official (s. 19.42, Wisconsin Statutes), a member of a state public official's immediate family, or any organization in which a state public official or a member of the official's immediate family owns or controls a ten percent (10%) interest, is a party to this agreement, and if this agreement involves payment of more than three thousand dollars ($3,000) within a twelve (12) month period, this contract is voidable by the state unless appropriate disclosure is made according to s.

19.45(6), Wis. Stats., before signing the contract. Disclosure must be made to the State of Wisconsin

Ethics Board, 44 E. Mifflin Street, Suite 601, Madison, Wisconsin 53703 (Telephone 608-266-8123).

State classified and former employes and certain University faculty/staff are subject to separate disclosure requirements, s. 16.417, Wis. Stats.

29.0

ANTI-KICKBACK ACT of 1986:

(41 USC 51 et. seq): To the extent required by law, the officer or employe responsible for submitting this bid shall certify, in accordance with 48 CFR 52.203-7, to the best of their knowledge, that they have no information concerning the violation of the Anti- Kickback Act in connection with the submitted bid

/

proposal. Signing the bid/proposal with a false statement shall void the submitted bid/proposal and any resulting contract(s).

30.0

RECYCLED MATERIALS:

The University is required to purchase products incorporating recycled materials whenever technically or economically feasible. Bidders/proposers are encouraged to bid/propose products with recycled content which meet specifications

.

31.0

HOLD HARMLESS: The Contractor will indemnify and save harmless the State of Wisconsin and all of its officers, agents and employees from all suits, actions, or claims of any character brought for or on account of any injuries or damages received by any persons or property resulting from the operations of the

Contractor, or of any of its Contractors, in prosecuting work under this agreement.

32.0

PROMOTIONAL ADVERTISING/NEWS RELEASES:

Reference to or use of the State of Wisconsin, any of its departments, agencies (University) or other subunits, or any state official or employee for commercial promotion is prohibited. News releases pertaining to this procurement shall not be made without prior approval of the University. Release of broadcast e-mails pertaining to this procurement shall not be made without prior written authorization of the contracting agency.

33.0

WORK CENTER CRITERIA:

A work center must be certified under s. 16.752, Wisconsin Statutes, and must ensure that when engaged in the production of materials, supplies or equipment or the performance of contractual services, not less than seventy-five percent (75%) of the total hours of direct labor are performed by severely handicapped individuals.

34.0

FOREIGN CORPORATION: A foreign corporation (any corporation other than a Wisconsin corporation) which becomes a party to this Agreement is required to conform to all the requirements of Chapter 180,

Wis. Stats., relating to a foreign corporation and must possess a certificate of authority from the

Wisconsin Department of Financial Institutions, unless the corporation is transacting business in interstate commerce or is otherwise exempt from the requirement of obtaining a certificate of authority. Any foreign corporation which desires to apply for a certificate of authority should contact the Department of Financial

Institutions, Division of Corporation, P.O. Box 7846, Madison, WI 53707-7846; telephone (608) 261-7577.

35.0

FORCE MAJEURE: Neither party shall be in default by reason of any failure in performance of this

Agreement in accordance with reasonable control and without fault or negligence on their part. Such causes may include, but are not restricted to, acts of nature or the public enemy, acts of the government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, freight embargoes and unusually severe weather, but in every case the failure to perform such must be beyond the reasonable control and without the fault or negligence of the party.

36.0 WORK CENTER PROGRAM: The successful bidder/proposer shall agree to implement processes that allow the State agencies, including the University of Wisconsin System, to satisfy the State's obligation to purchase goods and services produced by work centers certified under the State Use Law, s.16.752, Wis.

Stat. This shall result in requiring the successful bidder/proposer to include products provided by work centers in its catalog for State agencies and campuses or to block the sale of comparable items to State agencies and campuses.

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 28 OF 30

ATTACHMENT G - APPLICABLE FEDERAL RULES

COMPLIANCE WITH LAWS:

The preferred vendor shall warrant and certify that in the performance of the resultant agreement it has complied with or will comply with all applicable statutes, rules, regulations and orders of the United States, and any state or political subdivision thereof, including laws and regulations pertaining to labor, wages, hours and other conditions of employment. All materials, equipment, and supplies provided to the members must comply fully with all safety requirements, rules of the Industrial Commission on Safety, and all applicable OSHA Standards.

DEBARMENT:

Federal Executive Order (E.O.) 12549 “Debarment“ requires that all contractors receiving individual awards, using federal funds, and all subrecipients certify that the organization and its principals are not debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded by any Federal department or agency from doing business with the Federal Government. As a part of this bid document there is debarment language and a signature block for you to self certify your debarment status on the Bidder Response Sheet. Failure to supply this information may disqualify your bid.

Information on debarment is available at the following websites: www.epls.gov and www.arnet.gov/far/.

DEVELOPMENT OF DISADVANTAGED SUPPLIERS:

The University is committed to encouraging the development of minority, women-owned, and otherwise small and disadvantaged businesses. The selected preferred vendor shall make effort to subcontract with minority, womenowned and otherwise small and disadvantaged businesses. A quarterly report will be required indicating the extent of effort and members’ participation. The report will be in a format acceptable to University.

GENERAL PROVISIONS AND CERTIFICATIONS FOR GOVERNMENT CONTRACTS:

The following clauses are applicable and are hereby incorporated by reference into solicitations and any purchase orders with the same force and effect as if set forth in full text. To the extent that an earlier version of any such clause is included in the prime contract or subcontract under which solicitation or purchase order is issued, the date of the clause as it appears in such prime contract or subcontract shall be controlling and said version is incorporated herein.

Where necessary to make the context of the Federal Acquisition Regulations (FAR), Department of Defense Federal

Acquisition Regulation Supplement (DFARS), and Code of Federal Regulations (CFR) clauses set forth in these

General Provisions applicable to this solicitation or subcontract, the term

“Contractor” shall mean “Subcontractor”,

“Seller” or “Supplier”, the term “Contract” or “Subcontract” shall mean “Purchase Order”, the term “Government” shall mean “Buyer” or “University” and the term “Contracting Officer” shall mean “Buyer’s Purchasing Representative”. It is intended that the referenced clauses shall apply to Seller, the legal entity which contracts with the University under any solicitation or purchase order, in such manner as is necessary to reflect the position of Seller as a Supplier to the

University, Buyer and legal entity issuing a solicitation or purchase order; to insure Seller’s obligations to the University and the United States Government; and to enable the University to meet its obligations under its prime contract or subcontract.

The clauses incorporated by reference may be found in the Federal Acquisition Regulations (FAR), the DOD Federal

Acquisition Regulation Supplement (DFARS), or the Code of Federal Regulations (CFR). Copies may be purchased from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, or see the following websites for more information: http://farsite.hill.af.mil/VFFARA.HTM

(click “

FARSEARCH

” tab) http://www.gpoaccess.gov/cfr/index.html

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

FAR (52 Series) / DFARS (252 Series)

52.202-1

52.204-2

Definitions (Dec 2001)

Security Requirements (Aug 1996) (Alt. I)

52.215-16

52.215-17

52.227-10

52.232-8 Discount for Prompt Payment (May 1997)

Prompt Payment (Feb 2002)

CONTRACT NO.: 11-5348

PAGE 29 OF 30

Facilities Capital Cost of Money (Oct 1997)

Waiver of Facilities Capital Cost of Money (Oct 1997) (when cost of money is not proposed)

Filing of Patent Applications

– Classified Subject Matter (Apr 84)

52.232-25

52.233-3

52.243-1

52.245-2

52.245-18

52.249-1

Protest After Award (Aug 96) (Alt. I)

Changes

– Fixed Price – Alt. II (Apr 84)

Government Property (Fixed Price Contracts) (Dec 89)

Special Test Equipment (Feb 93)

Termination for Convenience of the Government (Fixed Price) (Short Form) (Apr 84)

52.249-8

52.251-1

52.253-1

252.225-7001

252.225-7002

252.225-7007

252.225-7009

252.225-7016

Default (Fixed-Price Supply and Service) (Apr 84)

Government Supply Sources (Apr 94)

Computer Generated Forms (Jan 91) March 27, 1997

Buy American Act and Balance of Payments Program (Mar 1998)

Qualifying Country Sources as Subcontractors (Dec 91)

Trade Agreements Act (Sep 2001)

Duty-Free Entry-Qualifying Country End Products and Supplies (Aug 2000)

Restriction on Acquisition of Ball and Roller Bearings (Dec 2000)

252.227-7013

252.227-7026

252.227-7027

252.227-7030

252.227-7037

252.227-7039

252.251-7000

Rights in Technical Data and Computer Software (Nov 1995)

Deferred Delivery of Technical Data or Computer Software (Apr 88)

Deferred Ordering of Technical Data or Computer Software (Apr 88)

Technical Data - Withholding of Payment (Mar 2000)

Validation of Restrictive Markings on Technical Data (Sep 1999)

Patents-Reporting of Subject Inventions (Apr 90)

Ordering from Government Supply Sources (May 1995)

CFR : 2 CFR 215 Uniform Administrative Requirements for Grants and Agreements With

Institutions of Higher Education, Hospitals, and Other Non-Profit Organizations (OMB Circular A-110)

Applicable when fixed price is greater than $2,500:

FAR (52 Series)

52.222-3

52.222-19

52.225-13

52.232-23

52.232-23

Convict Labor (Aug 1996)

Child Labor

– Cooperation with Authorities and Remedies (Dec 2001)

Restrictions on Certain Foreign Purchases (Jul 2000)

Assignment of Claims (Jan 86)

Assignment of Claims (Jan 1986)

Applicable when fixed price is greater than $10,000:

FAR (52 Series)

52.222-20

52.222-21

52.222-22

52.222-26

52.222-36

Walsh-Healy Public Contracts Act (Dec 96)

Prohibition of Segregated Facilities (Feb 1999)

Previous Contracts & Compliance Reports (Feb 1999)

Equal Opportunity (Apr 2002)

Affirmative Action for Workers with Disabilities (Jun 1998)

UNIVERSITY OF WISCONSIN

MADISON, WISCONSIN 53715-1218

CONTRACT NO.: 11-5348

PAGE 30 OF 30

Applicable when fixed price is greater than $25,000:

By submitting a signed proposal or quotation in respo nse to the University’s solicitation, the supplier is providing a negative assurance in accordance with FAR 52.209-5 Certification Regarding Debarment, Suspension, Proposed

Debarment, and Other Responsibility Matters. Certification in paragraph (a) of this clause is material representation of fact upon which reliance is placed when making any resulting award.

FAR (52 Series) / DFARS (252 Series)

52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred,

52.222-35

Suspended, or Proposed for Debarment (Jul 95)

Affirmative Action for Special Disabled and Vietnam Era Veterans (Dec 2001)

52.222-37

252.227-7036

252.231-7000

252.246-7000

Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era (Dec 2001)

Certification of Technical Data Conformity (May 87)

Supplemental Cost Principles (Dec 91)

Material Inspection and Receiving Report (Dec 91)

(Note: Not required for subcontracts for which the deliverable is a scientific or technical report.)

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement