Baumatic | B260.1SS | User manual | Baumatic B260.1SS User manual

B260.1SS-A
60cm Multifunction
built in oven.
1
User Manual for your Baumatic
B260.1SS-A
60 cm Multifunction built in oven
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future refe rence; for
you or any person not familiar with the operation of the appliance.
DD 30/10/06
2
Contents
Environmental note
4
Important safety information
5–7
Specifications
Product and aperture dimensions
Product specifications
Standard accessories
Optional extras
Electrical details
Control panel
Oven programmer/timer display
8
8
8
8
8
9
9
10
Setting and using the oven programmer/timer
Selecting manual operation mode
Setting the time of day
Setting the minute minder function
Setting the duration function
Setting the end cook function
Setting the start and end time function
10
10
10
11
11-12
12-13
13-14
Selecting a cooking function and temperature
Selecting manual operation mode
Selecting an oven function
Thermostat control knob
Oven operating light
14
14
14-15
16
16
Cooking guidelines
Warnings
16-17
17
Cleaning and maintenance
Removable oven roof liner
Replacing the oven bulb
18
19
19
Installation
Electrical connection
Reversing the door of your appliance
Installing the oven into the kitchen cabinet
20
20
21-24
25
My appliance isn’t working correctly
26-27
Baumatic Ltd. conditions of guarantee
28
Contact details
29
3
Environmental note
o The packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
o Please discard all packaging material with due regard for the
environment.
4
IMPORTANT SAFETY INFORMATION
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Technical
Department.
General Information
o This appliance is designed for domestic household use and can
be built into a standard kitchen cabinet or housing unit.
o IMPORTANT: The adjacent furniture or housing and all
materials used in the installation must be able to withstand a
minimum temperature of 85°C above the ambient temperature
of the room it is located in, whilst in use.
o Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
o Any damage caused by the appliance being installed in
contravention of this temperature limit, or by placing adjacent
cabinet materials closer than 4mm to the appliance, will be the
liability of the owner.
o For use in leisure accommodation vehicles, please refer to
the appropriate information given in the installation instructions
for this appliance.
o The use of this appliance for any other purpose or in any other
environment without the express agreement of Baumatic Ltd.
will invalidate any warranty or liability claim.
o Your new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of Guarantee. The foregoing does not
affect your statutory rights.
o Repairs may only be carried out by Baumatic Service
Engineers or their authorised service agent.
5
Warning and safety instructions
o This appliance complies with all current European safety
legislation. Baumatic do wish to emphasise that this compliance
does not remove the fact that the appliance surfaces will
become hot during use and retain heat after operation.
Child Safety
o Baumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the appliance at any time.
o If it is necessary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
General Safety
o Do not place heavy objects on the oven door or lean on the
oven door when it is open, as this can cause damage to the oven
door hinges.
o Do not leave heated oil or fat unattended, as this is a fire risk.
o Do not place pans or baking trays directly on the base of the
oven cavity, or line it with aluminium foil.
o Do not allow electrical fittings or cables to come into contact
with areas on the appliance that get hot.
o Do not use the appliance to heat the room it is located in or to
dry clothing.
o Do not install the appliance next to curtains or soft furnishings.
o Do not attempt to lift or move cooking appliances by using the
oven door or handle, as this may cause damage to the appliance
or result in injury to the person lifting the appliance.
Cleaning
o Cleaning of the oven should be carried out on a regular basis.
o Great care should be taken whilst using this appliance and when
following the cleaning procedure.
o IMPORTANT: The appliance must be disconnected from the
mains before following the cleaning procedure.
6
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions.
o Baumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a result of improper
use or installation of this appliance.
o Heat, steam and moisture will be created during use of the
appliance, take care to avoid injury and ensure that the room is
adequately ventilated. If the appliance is going to be used for
prolonged periods of time, then additional ventilation may be
required.
o Please consult with your qualified installer if you are in any doubt
about the amount of ventilation that you will require.
Declaration of conformity
o In the parts destined to come into contact with foodstuffs, this
appliance is in accordance with the requirements of the EC
directive 89/109 transposed in the Italian Legislative Decree No.
108 of 25/01/92.
o CE: Appliance conforming to the European directives
89/336/EEC, 93/68/EEC, 73/23/EEC and subsequent revisions
and “RoHS” directive 2002/95/CE.*
o The manufacturer declares that the oven is built using certified
materials and requires the appliance to be installed in
accordance with the standards currently in force. This appliance
must be used by a trained person for domestic purposes only.
* The RoHS directive stands for “the restriction of the use of
certain hazardous substances in electrical and electronic
equipment”. This directive bans the placing on the EU market of
new electrical and electronic equipment containing more than
the agreed levels of lead, cadmium, mercury, hexavalent
chromium, polybrominated biphenyl (PBB) and polybrominated
diphenyl ether (PBDE) flame retardants.
7
Specifications
Product Dimensions
Height:
Width:
Depth:
596 mm
596 mm
545 mm
Aperture Dimensions
Height:
Width:
Depth:
585 mm
560 mm
560 mm
Product specifications
o
o
o
o
o
o
o
o
o
o
o
9 functions
Energy efficiency class: A
Mark resistant coating
Oven capacity: 65 litres
Side opening reversible door
LED full programmer
Cooling fan
Thermostatically controlled grill
Wipeclean enamel cavity
Flush mounted installation
Double-glazed removable door
Standard accessories:
o
o
o
o
o
Removable roof liner
Removable side racks
2 x safety shelves
Wipeclean enameled drip tray with handle
Trivet
Optional extras:
o BPS1 Pizza stone
o TEL4KIT Telescopic runners kit
Cooling fan
o A tangential cooking fan is fitted inside of this appliance, to make
the internal temperature of the oven stable and the external
surface temperature lower.
8
Electrical details
Rated Voltage:
Supply Connection:
Max Rated Inputs:
Mains Supply Lead:
Oven Light Bulb:
230 Vac 50 Hz
16 A (double pole switched fused
outlet with 3mm contact gap
3.6 kW
3 x 1.5mm²
25 W/300°C screw type pigmy
For future reference please record the following information which can
be found on the Rating Plate and the date of purchase which can be
found on your sales invoice. The rating plate for your oven can be
located by opening the oven door and looking on the right hand side of
the oven chassis.
Model Number
……………………………….
Serial Number
……………………………….
Date of Purchase
……………………………….
Control Panel
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
Oven function selector knob
Power indicator light
Oven programmer/timer
Timer “minute minder” button
Timer “duration” button
Timer “end cook” button
Timer “manual operation” button
Timer “minus” button
Timer “plus” button
Oven operating light
Thermostat control knob
9
Oven programmer/timer display
12)
13)
14)
“Auto” function symbol
“Minute minder” symbol
“Manual operation” symbol.
Setting and using the oven programmer/timer
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
must set the appliance into “manual operation” mode.
o To select manual operation mode, press the “manual operation”
button (7) on the control panel.
Setting the time of day
After setting your oven for manual operation, you should also
set the time of day.
o Use the “minus” button (8) and “plus” button (9) to adjust the
time that appears in the display. After getting the display to the
correct time, release the “minus” and “plus” buttons. After a few
seconds the time will fix in the display and you will be able to
use your oven.
10
Setting the minute minder function
You are able to set the minute minder at any time, regardless
of whether an oven function has been selected. You can set a
period of time using the minute minder function and an alarm
will sound when this period of time has elapsed.
o Press the “minute minder” button (4), the display will show a
value of 00:00. Set the period of time that you wish the minute
minder to countdown for, by using the “minus” (8) and “plus”
(9) buttons.
o Once the display has got to your desired countdown time, let go
of the “minus” and “plus” buttons. The minute minder symbol
(13) will appear on the timer display.
o Once a countdown time has been set, it is possible to shorten or
lengthen the time by using the “minus” or “plus” buttons.
o An alarm will sound when the countdown time has elapsed. The
alarm can be silenced by pressing the “minute minder” button.
o Important: The oven will continue to heat once the alarm has
been silenced. If you have finished cooking, then you should turn
the oven function selector and thermostat control knob to 0.
Setting the duration function
This function will allow you to set a countdown time similar to
the minute minder function. However the oven will no longer
continue to heat, once the countdown period has elapsed.
o Use the thermostat control knob (11) to set the temperature
that you require. The manual operation symbol (14) will appear
on the display.
o Use the oven function selector knob (1) to select the mode of
cooking that you require.
o It is then possible to set the duration of the cooking time that
you require.
o Press the “duration” button (5) and the display will show a value
of 00:00. Set the period of time that you wish the duration
function to countdown for, by using the “minus” (8) and “plus”
(9) buttons.
11
o Once the display has got to your desired countdown time, let go
of the “minus” and “plus” buttons. The countdown will start
immediately and the word AUTO will appear on the timer display.
o Once a countdown time has been set, it is possible to shorten or
lengthen the time by using the “minus” or “plus” buttons.
o An alarm will sound when the countdown time has elapsed and
the oven will switch off. The word AUTO will flash and the
heating symbol will disappear. The alarm can be silenced by
pressing the “duration” button.
o You will need to return the oven to manual operation mode, once
the duration function has been used. To do this you should press
the “manual operation” button, the word AUTO will disappear
from the display and the manual operation symbol will appear
instead.
o Important: If you do not turn the thermostat control knob and
oven function selector knob to 0. Then the appliance will
continue to operate as soon as you press the “manual operation”
button.
Setting the end cook function
This function is similar to the duration function, however
instead of selecting a period of time that you wish the oven to
switch off after. You select the time of day that you wish the
oven to switch off at.
o Use the thermostat control knob (11) to set the temperature
that you require. The manual operation symbol (14) will appear
on the display.
o Use the oven function selector knob (1) to select the mode of
cooking that you require.
o Press the “end cook” button (6) and the display will show a
value of 00:00. Set the time of day that you wish the oven to
stop cooking at by using the “minus” and “plus” buttons. The
timer will calculate how long the cooking time will be, based on
the time of day that you have selected and show it on the
display.
o Once the display has got to the time of day that you want the
oven to stop cooking at, let go of the “minus” and “plus”
buttons. The countdown will start immediately and the word
AUTO symbol will appear on the timer display.
12
o When the time is set, it can be modified by pressing the “minus”
and “plus” buttons.
o When the time of day reaches the end of cooking time that you
set, the oven will switch off and an alarm will sound. The word
AUTO will flash and the heating symbol will disappear. The
alarm can be silenced by pressing the “end cook” button.
o You will need to return the oven to manual operation mode, onc e
the end cook function has been used. To do this you should
press the “manual operation” button, the word AUTO will
disappear from the display and the manual operation symbol will
appear instead.
o Important: If you do not turn the thermostat control knob and
oven function selector knob to 0. Then the appliance will
continue to operate as soon as you press the “manual operation”
button.
Setting the start and end time function
This function will allow you to set a time in the future that the
oven switches on at and a time that the oven will switch off at.
o Use the thermostat control knob (11) to set the temperature
that you require. The manual operation symbol (14) will appear
on the display.
o Use the oven function selector knob (1) to select the mode of
cooking that you require.
o Press the “duration” button (5) and the display will show a value
of 00:00. Set the period of time that you wish to cook for, by
using the “minus” (8) and “plus” (9) buttons. The word AUTO
will appear on the timer display.
o Immediately press the “end cook” button (6) and the timer
display will show the value 00:00. Set the time of day that you
want the oven to switch off at, using the “minus” and “plus”
buttons.
o The oven will calculate what time it needs to switch on at, so
that your food will cook for the length of time that you selected.
It will automatically switch itself on, once it reaches the time of
day that it has calculated.
13
o When the time of day reaches the end of cooking time that you
set, the oven will switch off and an alarm will sound. The word
AUTO will flash and the heating symbol will disappear. The alarm
can be silenced by pressing the “end cook” or “duration” button.
o You will need to return the oven to manual operation mode, once
the start and end time function has been used. To do this you
should press the “manual operation” button, the word AUTO will
disappear from the display and the manual operation symbol will
appear instead.
o Important: If you do not turn the thermostat control knob and
oven function selector knob to 0. Then the appliance will
continue to operate as soon as you press the “manual operation”
button.
Selecting a cooking function and temperature
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
must set the appliance into “manual operation” mode.
o To select manual operation mode, press the “manual operation”
button (7) on the control panel.
Selecting an oven function
The oven function selector knob should be
used to select the particular mode of cooking
that you require. The appliance will utilise
different elements within the oven cavity,
depending on the oven function that you
select. When a function is selected, the
power indicator light will come on.
14
There are nine cooking functions available on your appliance:
OVEN LIGHT: Separate light control which allows the light to be
switched on, even when the oven is switched off.
DEFROST MODE: The fan runs without heat to reduce the
defrosting time of frozen foods. The time required to defrost the
food will depend on the room temperature, the quantity and type
of food. Always check food packaging for the defrosting
instructions.
CONVENTIONAL OVEN (top and lower element): This
method of cooking provides traditional cooking, with heat from
the top and lower elements. This function is suitable for roasting
and baking on one shelf only.
FAN OVEN: This method of cooking uses the circular element
while the heat is distributed by the fan. This results in a faster
and more economical cooking process. The fan oven allows food
to be cooked simultaneously on different shelves, preventing the
transmission of smells and tastes from one dish onto another.
CONVENTIONAL OVEN & FAN: This method of cooking
provides traditional cooking with heat from the top and bottom
element. It also switches on the circulation fan which helps to
ensure fast, even distribution of the heat. This function is
suitable for light and delicate baking such as pastries. You can
cook on different shelf levels, as long as the food being cooked
requires the same cooking temperature.
TOP ELEMENT ONLY: This method of cooking uses the outer
part of the top element to direct heat downwards onto the food.
For gentle cooking, browning or keeping cooked dishes warm.
GRILL MODE: This method of cooking utilises the inner and
outer sections of the top element, which directs heat
downwards onto the food. This function is suitable for grilling
medium or large portions of sausages, bacon, steaks, fish etc.
FAN AND GRILL: This method of cooking utilises the top
element in conjunction with the fan, which helps to provide a
quick circulation of heat. This function is suitable where quick
browning is required and “sealing” the juices in, such as steaks,
hamburgers, some vegetables etc.
FAN AND LOWER ELEMENT: This method of cooking utilises
the bottom element in conjunction with the fan, which helps to
circulate the heat. This function is suitable for sterilizing and
preserving jars.
15
Thermostat control knob
The oven thermostat control knob sets the required
temperature of the oven. It is possible to regulate
the temperature within a range of 50 - 250°C.
Turn the control knob clockwise.
Oven operating light
This light will come on to indicate that the oven’s heating elements are
in operation. The light will turn off when the temperature set on the
thermostat control knob has been reached. It will cycle on and off
throughout the cooking time.
You should not place food inside the cavity, until the correct
cooking temperature has been reached.
Cooking guidelines
o Please refer to the information given on food packaging for
guidance on cooking temperatures and times. Once familiar with
the performance of your appliance, temperatures and times can
be varied to suit personal preference.
o If you are using the fan oven function, then you should follow
the information given on the food packaging for this particular
mode of cooking.
o Make sure that frozen foods are thoroughly thawed before
cooking, unless the instructions on the food packaging advise
that you can “cook from frozen”.
o You should pre-heat the oven and not place food inside of it until
the oven operating light has gone off. You can choose not to preheat when using the fan oven mode; however you should extend
the cooking time given on the food packaging by approximately
ten minutes.
o Before cooking, check that any unused accessories are removed
from the oven.
16
o Place cooking trays in the centre of the oven and leave gaps
between the trays to allow air to circulate.
o Try to open the door as little as possible to view the dishes.
o The oven light will remain on during cooking.
Warnings
o Keep the oven door closed when using either of the grill
functions.
o Do not use aluminium foil to cover the grill pan or heat items
wrapped in aluminium foil under the grill. The high reflectivity of
the foil could potentially damage the grill element.
o You should also never line the base of your oven with aluminium
foil.
o During cooking, never place pans or cookware directly onto the
bottom of your oven. They should always be placed on the
shelves provided.
o The grill heating element becomes extremely hot during
operation, avoid touching it inadvertently when handling the
food which you are grilling.
o Important: Be careful when opening the door, to avoid contact
with hot parts and steam.
o The drip tray handle should only be used to reposition the drip
tray and NOT for removing it from the oven cavity. When
removing the drip tray, you should ALWAYS use an oven glove.
o The drip tray handle should not be left in position when the
appliance is switched on.
17
Cleaning and maintenance
Cleaning operations must only be carried out
when the oven is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
process.
o The oven should be thoroughly cleaned before it is operated for
the first time and after each use. This will avoid residual food
stuffs becoming baked on the oven cavity. After residues have
been baked on several times, they are far more difficult to
remove.
o Never clean the oven surfaces by steam cleaning.
o The oven cavity should only be cleaned with warm soapy water,
using either a sponge or soft cloth. No abrasive cleaners should
be used.
o Any stains that may appear on the bottom of the oven will have
originated from food splashes or spilt food, these splashes occur
during the cooking process. These could possibly be a result of
the food being cooked at an excessively high temperature or
being placed in cookware that is too small.
o You should make sure that the cooking temperature that is
selected is appropriate for the food that you are cooking. You
should also ensure that the food is placed in an adequately sized
dish and you the drip tray where appropriate.
o Outer parts of the oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.
18
Removable oven roof liner
o Your appliance is supplied with a roof liner, which should be slid
over the top of the grill element.
o Once you have finished cooking, the liner should be removed
and thoroughly cleaned after each use of the appliance.
o Do not allow fat and grease to build up on the oven liner, as this
could cause a fire hazard.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves, the drip tray and the side rack that is
on the same side as the oven light.
o Using a screwdriver, remove the lamp cover.
o Unscrew the bulb clockwise and remove it from its holder.
o Replace the bulb with a 25 W/300°C, screw type pigmy.
o Do not use any other type of bulb.
o Place the lamp cover back into position. There is a curve on one
side of the cover; this should be on the right hand side as the
cover goes back into place.
19
INSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European Norm
Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
Before connecting the appliance, make sure that the supply voltage
marked on the Rating Plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be wired into a 13 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in
its housing.
o To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o If you have to change the oven power cord, the earthing
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
o Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement which can be obtained from the
Baumatic Spares Department.
20
Reversing the door of your appliance
IMPORTANT: This operation must be only carried out
by a suitably qualified person. Baumatic Ltd. do not
recommend that a customer completes this operation.
o It is necessary to disconnect the oven from the mains
before executing the operations described in the present
manual.
o Please read this text thoroughly before starting with the
work.
o Once that the operations are completed, ensure that the
oven is re-assembled properly and check the electric
connection.
o In order to reverse the door it is necessary to remove the covers
of the Oven. Therefore if the appliance is already installed,
loosen the screws which fixed the oven to the cabinet and
extract it from the unit.
1) Loosen the screws and remove the
upper cover of the oven
2) Loosen the screws that fix the
control panel. These can be found
o On the stainless steel sides
of the oven.
o On the base of the control
panel (where the ventilation
slots are cut out).
21
3) IMPORTANT: Support the oven door from the underneath
whilst attempting the next stage.
o Rotate the control panel as shown whilst supporting the
underneath of the oven door.
o Pull the door away from the oven cavity and gently lean it on
some padded material, to ensure that no damage is caused to
the oven door or door glass.
4) Loosen the screws of the
rear cover, but before
removing the cover, you
should disconnect the
wiring going into the switch
box.
5) Loosen the screws that are shown
in the diagram opposite, on both sides
of the appliance.
No other screws should be
removed.
22
6) Remove the side covers from
both sides of the appliance.
7) To gain access to the rear part of the door frame, the following
stages need to be followed;
o The door has two pivots, which slot into the lock assemblies that
are located behind the door frame.
o On the other side of the door frame, there are two covering
plates.
o Loosen the screws that fix the lock assemblies and covering
plates into place. Then place the lock assemblies and covering
plates onto the other side of the door frame from where they
were originally placed.
o IMPORTANT: Whilst completing this section, it is
important to avoid causing damage to the oven insulation.
23
8) Change the position of the pivot and cylindrical insert that sit in the
base of the oven frame.
9) Unscrew the door handle and place it on the other side of the oven
door.
o You should also reverse the position of the locking pivots.
IMPORTANT: When the above steps have been followed, it is
necessary to reassemble all of the components.
o You should pay particular attention to the wiring, it is important
to make sure that no wiring has been damaged during the door
reversal operation.
o You should ensure that all the electrical components and the
oven programmer work correctly before reassembling the covers
of the oven.
24
Installing the oven into the kitchen cabinet
Ventilation
cut out.
Ventilation
cut out.
Fixing the oven into a cabinet.
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
o Ensure that the rear panel of the furniture housing unit has been
removed.
o This oven may be installed without any additional ventilation cut
outs being made in the housing unit. However the ventilation cut
out indicated by the arrow in figure 1 MUST be present,
otherwise the oven may overheat. This applies to a built in or
built under installation.
o Ensure that the oven has
been securely fixed into
the housing unit. The
fixing of the oven into
the housing is made by
using four screws. These
should be screwed
through the oven cabinet
and into the housing
unit.
25
My appliance isn’t working correctly
o The oven isn’t coming on.
* Check that the oven is in manual operation mode.
* Check that you have selected a cooking function and a cooking
temperature.
o There appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
* Check that the operating instructions for setting the time of day
and putting the appliance into manual operation mode have been
followed.
o The grill function works but the main oven does not.
* Check that you have selected the correct cooking function.
o The grill and top oven element is not working, or cuts out
for long periods of time during use.
* Allow the oven to cool for approximately 2 hours. Once cool,
check whether the appliance is again working properly.
o My food is not cooking properly
* Ensure that you are selecting the correct temperature and the
correct cooking function for the food that you are cooking. It
may be appropriate to adjust your cooking temperature by plus
or minus 10°C, to achieve the best cooking results.
o My food is not cooking evenly
* Check that the oven has been installed correctly and is level.
* Check that the correct temperatures and shelf positions are
being used.
26
o The oven light is not working
* Refer to page 19 and follow the “Replacing the oven bulb”
section.
o I am getting condensation in my oven
* Steam and condensation is a natural by product of cooking any
food with high water content, such as frozen food, chicken etc.
* You may get condensation in the oven cavity and forming
between the oven door glasses. This is not necessarily a sign
that the oven is not working correctly.
* Do not leave food in the oven to cool after it has been cooked
and the oven has been switched off.
* Use a covered container, where practical, when cooking to
reduce the amount of condensation that forms.
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact the
Baumatic Service Department on telephone
number (0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee document on page 28 of
this instruction manual for clarification of this.
27
Baumatic Ltd. Conditions of Guarantee
Dear Customer,
Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and
labour costs resulting from defective materials or workmanship.
Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12
months at no extra cost, giving an initial guarantee period of 24 months. The extended guarantee period
applies to England, Scotland, Wales and Northern Ireland only.
To qualify for your full 24 months guarantee you must register your appliance within 28 days of purchase
to be covered under this guarantee. This can be done online via: www.baumatic.co.uk or through returning
the guarantee card which can be found in each new Baumatic appliance.
* In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of
charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any
defect that arises due to faulty materials or workmanship within a period of 5 years from the original
purchase date.
* An additional 1 to 3 year insurance scheme for labour is available should you wi sh to extend the
warranty period.
Should any person other than an authorised representative of Baumatic Ltd interfere with the appliance, the
policy is negated and Baumatic Ltd will be under no further liability.
The guarantee covers the appliance for normal domestic use only, unless otherwise stated.
Any claims made under the terms of the guarantee must be supported by the original invoice/bill of sale
issued at the time of purchase.
This guarantee is transferable only with the written consent of Baumatic Ltd.
If the appliance fails and is considered either not repairable or uneconomical to repair during the
manufacturer warranty period, a free of charge replacement will not be offered.
The guarantee for any replacement will only be for the remainder of the guarantee on the original product
purchased.
The guarantee does not cover:
- Sinks and taps
- Failure to comply with the manufacturers instructions for use.
- The replacement of cosmetic components of accessories
- Accidental damage or wilful abuse.
- Subsequent loss or damage owing to the failure of the appliance or electrical supply
- Incorrect installation
- Losses caused by Acts of God, civil war, failure to obtain spare parts, strikes or lockouts
- Filters, fuses, light bulbs, external hoses, damage to bodywork, paintwork, plastic items, covers,
baskets, trays, shelves, burner bases, burner caps, decals, corrosion, rubber seals.
In the course of the work carried out it may be necessary to remove the appliance from it operating
position. Whilst all reasonable care will be taken, Baumatic Ltd cannot accept responsibility for damage
sustained to any property whatsoever in this process.
This guarantee is in addition to and does not diminish your statutory or legal rights.
Contacting Baumatic Ltd
Sales
Service
Spares
TEL: 0118 933 6900
TEL: 0118 933 6911
TEL: 0118 933 6922
FAX: 0118 931 0035
FAX: 0118 986 9124
FAX: 0118 933 6942
For ROI (Republic of Ireland), please contact one of the numbers below:
TEL: 01 – 6266798
FAX: 01 - 6266634
Technical/Advice
0118 933 6933
0118 933 6942
Thanks you for buying Baumatic.
* Applies to UK, Scotland, Wales & Northern Ireland only (Republic of Ireland has 1 year labour & 1 year parts warranty only)
28
Baumatic Ltd
You will be mine
Headquarters
Baumatic Ltd.
Baumatic Buildings,
6 Bennet Road,
Reading,
Berkshire
RG2 0QX, United Kingdom
Sales Telephone
+44 118 933 6900
Sales Fax
+44 118 931 0035
Service Telephone
+44 118 933 6911
Service Fax
+44 118 986 9124
Spares Telephone
+44 118 933 6922
Technical / Advice Telephone
+44 118 933 6933
E-mail:
sales@baumatic.co.uk
technical@baumatic.co.uk
Http (Internet site):
www.baumatic.com
29
30
Download PDF

advertising