U-Line | U-ADA15IMB-00A | Product manual | U-Line U-ADA15IMB-00A Product manual

QUICK START GUIDE
Ice Makers
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Refrigerator Drawers, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Integrated Panel
Instructions, Compliance Documentation and Product Warranty information are all available for reference and download at
u-line.com under Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: onlineservice@u-line.com
T: +1.414.354.0300
Parts Email: onlineparts@u-line.com
F: +1.414.354.7905
Email: sales@u-line.com
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
3
Safety and Warning
3
Environmental Requirements
4
Water Hookup
7
Door Swing
7
General Installation
8
First Use
8
Ice
9
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Crescent Ice Makers
U-BI1215S-00A
U-BI1215INT-00A
U-BI1215B-00A
U-BI1215W-00A
ADA Series
U-BI95B-00A
U-BI98B-00A
U-ADA15IMS-00A
U-BI95W-00A
U-BI98W-00A
U-ADA15IMB-00A
Outdoor Series
U-BI1215SOD-00A
1
QUICK START GUIDE
u-line.com
Marine Series
ULN-BI95FCB-03A
ULN-WH95FC-03A
ULN-SS1095FC-03A
ULN-BI95FCB-20A
ULN-WH95FC-20A
ULN-SS1095FC-20A
ULN-SS1095FD-03A
ULN-SS1095FD-20A
ULN-SS1095NF-03A
ULN-SS1095NF-20A
ULN-SP18FCS-03A
ULN-SP18FCS-20A
ULN-SP18FCB-03A
ULN-SP18FCB-20A
ULN-SP18FCW-03A
ULN-SP18FCW-20A
ULN-SS98NF-03A
ULN-SS98NF-20A
Visit http://www.u-line.com/product-literature/userguides or
scan this QR code to view all user guides online.
2
QUICK START GUIDE
u-line.com
Safety and Warning
Environmental Requirements
NOTICE
This unit is designed to operate between 50°F (10°C) and
100°F (38°C). Higher ambient temperatures may reduce
PLEASE READ all instructions before installing,
the unit’s ability to reach low temperatures and/or reduce
operating, or servicing the appliance.
ice production on applicable models.
Use this appliance for its intended purpose only and follow
For best performance, keep the unit out of direct sunlight
these general precautions with those listed throughout this
and away from heat generating equipment.
guide:
In climates where high humidity and dew points are
SAFETY ALERT DEFINITIONS
present, condensation may appear on outside surfaces.
Throughout this guide are safety items labeled with a
This is considered normal. The condensation will
Danger, Warning or Caution based on the risk type:
evaporate when the humidity drops.
! DANGER
! CAUTION
Danger means that failure to follow this safety
Damages caused by ambient temperatures of
statement will result in severe personal injury or
40°F (5°C) or below are not covered by the
death.
warranty.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
3
QUICK START GUIDE
u-line.com
Water Hookup
Do not use Teflon tape or joint compound on the
FRONT MOUNTED VALVE
adequate seal. Other materials could cause
PREPARE PLUMBING
blockage of the valve.
water fitting. The rubber washer provides an
Please use a braided stainless steel water supply line.
P/N (WATERHOOKUP).
Failure to follow recommendations and
instructions may result in damage and/or harm,
flooding or void the product warranty.
! CAUTION
! CAUTION
Plumbing installation must observe all state and
local codes. All water and drain connections
MUST BE made by a licensed/qualified plumbing
Turn off water supply and disconnect electrical
contractor. Failure to follow recommendations
supply to unit prior to installation.
and instructions may result in damage and/or
harm.
Use caution when handling back panel. The
edges could be sharp.
Water Supply Connection
When connecting the water supply, please note the
1. Turn off water supply and disconnect electrical supply
following:
to product prior to attempting installation.
• Before installing the unit and connecting to the cold
2. Remove the grille/access panel in the front and the
water supply, review the local plumbing codes.
back panel.
• The water pressure should be between 20 and 120 psi.
3. Locate water
valve in the front
of the unit and
• The water line MUST have a shut-off valve in the
thread water
supply line.
supply line
through.
• The water line should be looped into 2 coils. This will
allow the unit to be removed for cleaning and servicing.
However, make certain that the tubing is not pinched
NOTICE
or damaged during installation.
Route the water
supply line
through the unit
! CAUTION
so it does not come into contact with any
internal components other than the solenoid
Do not use any plastic water supply line. The line
valve. Normal operation creates some vibration.
is under pressure at all times. Plastic may crack
A water supply line contacting an internal
or rupture with age and cause damage to your
component or cabinet wall can cause excessive
home.
noise during operation or damage to the line.
4
QUICK START GUIDE
u-line.com
REAR MOUNTED VALVE
4. On the back panel,
break away filler feature
PREPARE PLUMBING
in bushing, with flat
Please use a braided stainless steel water supply line.
screwdriver.
P/N (WATERHOOKUP).
Remove
ZLWKɠDW
screwdriver
! CAUTION
5. Thread water line
Plumbing installation must observe all state and
through back panel hole
local codes. All water and drain connections
(with bushing).
MUST BE made by a licensed/qualified plumbing
contractor. Failure to follow recommendations
and instructions may result in damage and/or
harm.
Water Supply Connection
6. Turn on water supply and check for leaks.
When connecting the water supply, please note the
following:
7. Reinstall back panel and grille/front access panel.
• Before installing the unit and connecting to the cold
8. Install retaining clip.
water supply, review the local plumbing codes.
• The water pressure should be between 20 and 120 psi.
• The water line MUST have a shut-off valve in the
supply line.
• The water line should be looped into 2 coils. This will
allow the unit to be removed for cleaning and servicing.
However, make certain that the tubing is not pinched
or damaged during installation.
! CAUTION
Do not use any plastic water supply line. The line
is under pressure at all times. Plastic may crack
or rupture with age and cause damage to your
home.
5
QUICK START GUIDE
u-line.com
4. Break away filler feature
Do not use Teflon tape or joint compound on the
water fitting. The rubber washer provides an
in bushing, with flat
adequate seal. Other materials could cause
screwdriver.
blockage of the valve.
Failure to follow recommendations and
Remove
ZLWKɠDW
screwdriver
instructions may result in damage and/or harm,
flooding or void the product warranty.
5. Thread water line
through back panel hole
! CAUTION
(with bushing).
Turn off water supply and disconnect electrical
6. Locate water valve inlet
supply to unit prior to installation.
and connect to valve.
Use caution when handling back panel. The
7. Turn on water supply
edges could be sharp.
and check for leaks.
1. Turn off water supply and disconnect electrical supply
8. Reinstall back panel.
to product prior to attempting installation.
9. Install retaining clip.
2. Remove the back panel.
3. Locate water valve inlet.
6
QUICK START GUIDE
u-line.com
Door Swing
MARINE SERIES
1200 SERIES
Wall
Wall
Wall
1/4" Min.
(6 mm)
3/4" (19 mm) Min.
2-1/8" Min.
(54 mm)
90°
Door Swing
90°
Door Swing
90°
Door Swing
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 3/4"
(19 mm) to accommodate the handle if the unit is
Units have a zero clearance for the door to open 90°,
installed next to a wall or similar type of structure.
when installed adjacent to cabinets.
Stainless Steel and black and white models require 2-1/8"
General Installation
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
MARINE AND BI SERIES
LEVELING INFORMATION
Integrated models require 1/4" (6 mm) clearance if
NOTICE
installed next to a wall. Allow for additional space for any
It is extremely important that these units sit on
knobs or pulls installed on the integrated panel/frame.
a level surface, as they do not have feet levelers.
If they are not level, the ice mold will not fill
BI SERIES
evenly.
1/4" Min. (6 mm)
Use a level to confirm
the unit is level. Level
should be placed along
top edge and side edge
as shown.
90°
Door Swing
1
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 1/4"
(6 mm) to accommodate the handle if the unit is installed
next to a wall.
7
QUICK START GUIDE
u-line.com
3. Gently push the unit into position. Be careful not to
1200 SERIES
kink the water supply line or entangle the power cord.
LEVELING INFORMATION
1. Use a level to
4. Re-check the leveling, from front to back and side to
confirm the unit is
level. Level should
side. Make any necessary adjustments. The unit’s top
be placed along top
surface should be approximately 1/8" (3 mm) below
edge and side edge
the countertop.
as shown.
First Use
1
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
2. If the unit is not level, adjust the feet on the corners of
the unit as necessary.
U-Line recommends discarding the ice produced
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
from the water line.
Turn Foot to Adjust
ON
OFF
To turn the unit on or off:
3. Confirm the unit is level after each adjustment and
repeat the previous steps until the unit is level.
Press the rocker switch located inside the door on the
front panel, or behind the grille.
INSTALLATION TIP
If the room floor is higher than the floor in the cut-out
opening, adjust the rear feet to achieve a total unit rear
height of 1/8" (3 mm) less than the opening’s rear height.
Ice
Shorten the unit height in the front by adjusting the front
ICE MAKER OPERATION
feet. This allows the unit to be gently tipped into the
When the ice bucket is full, the ice making mechanism will
opening. Readjust the front feet to level the unit after it is
shut off. However, the refrigeration system will continue
correctly positioned in the opening.
to cool and maintain the ice supply.
INSTALLATION
NOTICE
1. Open the water supply valve in the main water source.
Do not place cans or bottles in the ice
compartment because they will freeze.
2. Plug in the power cord.
8
QUICK START GUIDE
u-line.com
Remove the ice bucket for emptying and cleaning. To
OFF
remove the ice bucket, raise the bin arm and remove the
bucket from the ice compartment. Use the ice bucket for
ice storage only.
ON
Warranty
U-LINE CORPORATION LIMITED WARRANTY
1. U-Line Corporation (“U-Line”) warrants each U-Line
To turn off ice production: Raise the bin arm into
product to be free from defects in materials and
an upright and locked position. The unit will preserve
workmanship for a period of one year (two years on
temperature for ice storage.
Modular 3000 Series) from the date of purchase.
U-Line further warrants the sealed system (consisting
of the compressor, condenser, evaporator, hot gas
NOTICE
bypass valve, dryer, and connecting tube) in each
If not intending to use the ice maker, turn the
U-Line product to be free from defects in materials and
water supply valve off. It is also important to
workmanship for a period of five years from the date of
raise the bin arm of the ice maker (see above).
purchase.
Failure to raise the bin arm may result in damage
to the water valve.
2. During the initial one year warranty period (two years
on Modular 3000 Series) for all U-Line products U-Line
Certain sounds are normal during the unit’s operation. You
shall: (1) repair any product or replace any part of a
may hear the compressor or fan motor, the water valve,
product; and (2) for all Marine, RV and Domestic
or ice dropping into the ice bucket.
U-Line products sold and serviced in the United States
(including Alaska and Hawaii) and Canada, U-Line
shall be responsible for the labor costs performed by a
! CAUTION
U-Line authorized service company, incurred in
connection with the replacement of any defective part.
NEVER use an ice pick, knife or other sharp
During years two through five of the warranty period
instrument to separate cubes. Shake the ice
for the sealed system, U-Line shall: (1) at U-Line’s
bucket instead.
option repair or replace any part of the sealed system;
and (2) for all Marine, RV and Domestic U-Line
products sold and serviced in the United States
During periods of limited use or high ambient
(including Alaska and Hawaii) and Canada, U-Line shall
temperatures, it is common for cubes to fuse together.
be responsible for the labor costs incurred in
Gently shake the bucket to break apart cubes. If not using
connection with the replacement of any defective part
the ice maker regularly, empty the ice bucket periodically
of the sealed system. All other charges, including
to ensure fresh cubes.
transportation charges for replacements under this
warranty and labor costs not specifically covered by
It is normal for cubes to appear cloudy. The cause is air
this warranty, shall be the responsibility of the
trapped in the water because of fast freezing. It is not
purchaser. This warranty extends only to the original
caused by the health, taste or chemical make up of the
purchaser of the U-Line product. The Product
water. It is the same air that is in every glass of water you
Registration Card included with the product should be
drink.
9
QUICK START GUIDE
u-line.com
promptly completed by you and mailed back to U-Line
A. Outdoor product may come into contact with rain by
or you can register on-line at www.u-lineservice.com.
virtue of outdoor use. Exposure to other sources of
water shall also cause this warranty to be void,
including flooding of the area in proximity of the unit
3. The warranty listed above does not apply to floor
greater than 1/8" deep in water, hurricanes, splashing
display models. The warranty for these models shall
of pool water, or directing a spray from a hose or
be 30 days from the date of retail purchase and only if
similar device into and around the unit.
U-Line’s Product Registration Card included with the
unit is completed and mailed back or electronically
7. If a product defect is discovered during the applicable
submitted to U-Line. This 30 day warranty does not
apply to cosmetic damages. A proof of purchase may
warranty period, you must promptly notify either
be required.
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin
53223 USA or at +1.800.779.2547 or the dealer from
whom you purchased the product. In no event shall
4. The following conditions are excluded from this limited
such notification be received later than 30 days after
warranty: use of cleaners other than the recommended
the expiration of the applicable warranty period. U-Line
stainless steel cleaners and U-Line Clear Ice Maker
may require that defective parts be returned, at your
cleaner; installation charges; damages caused by
expense, to U-Line’s factory in Milwaukee, Wisconsin,
disasters or acts of God, such as fire, floods, wind and
for inspection. Any action by you for breach of
lightning; damages incurred or resulting from shipping,
warranty must be commenced within one year after
improper installation, unauthorized modification, or
the applicable warranty period.
misuse/abuse of the product; customer education
calls; food loss and spoilage; door and water level
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
adjustments (except during the first 30 days from the
OTHER WARRANTIES, EXPRESS OR IMPLIED,
date of installation); defrosting the product; adjusting
INCLUDING ANY IMPLIED WARRANTY OF
the controls; door reversal; and cleaning the
MERCHANTABILITY OR IMPLIED WARRANTY OF
condenser.
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
ARE DISCLAIMED. U-Line’s sole liability and your
5. U-Line products are designed to operate in ambient
exclusive remedy under this warranty are set forth in
temperatures between 50°F and 100°F unless
the paragraphs above. U-Line shall have no liability
otherwise noted in the product manual. Exposure to
whatsoever for any incidental, consequential or special
temperatures outside this range may cause
damages arising from the sale, use or installation of the
degradation of performance and issues such as lower
product or from any other cause whatsoever, whether
ice production or spoiled contents that are not covered
based on warranty (express or implied) or otherwise
under the terms of this warranty as a result of that
based on contract, tort or any other theory of liability.
exposure. U-Line product may not be subjected to
temperatures below 40°F without following the
Some states do not allow limitations on how long an
winterization and vacation shutdown procedures in the
implied warranty lasts or the exclusion or limitation of
user guide.
incidental or consequential damages, so the above
limitations may not apply to you. This warranty gives you
6. U-Line’s Outdoor Limited Warranty, set forth in this
specific legal rights, and you may also have other rights
Paragraph 6, shall apply to U-Line models deemed
which vary from state to state.
suitable for outdoor use by Underwriters Laboratory
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
Warranty 6/2014 Rev.G
website and/or on the serial tag located inside the
product.
Copyright © 2014 U-Line Corporation. All Rights Reserved.
Publication Number 30422 8/2014 Rev.A
10
Download PDF

advertising