Welcome
Thank you for buying a Valor Multimedia overhead monitor with media
player. Please read this manual carefully before using the overhead LCD
Monitor with media player in order to get the most out of all the features
and functions. Keep this manual in a safe place, as it can be a valuable
tool in helping you to understand all the features and functions.
Contents
Safety information .............................................................................. 1
DVD player features........................................................................... 3
Setting up your DVD player .............................................................. 9
Using your DVD player...................................................................... 14
Basic Operation ................................................................................ 16
System setup ...................................................................................... 23
Troubleshooting .................................................................................. 27
Specifications ...................................................................................... 28
Maintaining.......................................................................................... 29
Safety information
§
§
§
§
Do not operate the unit in any way other than described within this
manual. Failure to follow the instructions within the manual will void your
warranty.
SAFETY FIRST! Do not install the display where it may (i) obstruct the
driver’s vision, (ii) impair the performance of any of the vehicle’
s
operating systems or safety features, including airbags, or (iii) impair the
driver’s ability to safely operate the vehicle.
When using the system, make sure you are firmly secured by your seat
belt to ensure you do not accidentally hit your head on the screen during
sudden braking or other incidents. If you are ever in an accident, injuries
can be more severe if the seat belt is not properly buckled.
Do not attempt to install or service your display by yourself. Installation
1
or servicing of the display by persons without training and experience in
electronic equipment and automotive accessories may be dangerous
and could expose you to the risk of electric shock or other hazards.
Be careful not to drain the car battery while using the unit with the car
engine stopped. To avoid draining the battery, it is suggested that the
vehicle engine always is running while using the unit.
Do not disassemble or alter the unit in any way. Failure to do so can
cause damage to the unit and invalid the warranty.
Never clean the surface of the screen with chemical solvent or corrosive
detergent, which may cause permanent damage to the TFT LCD
screen.
Avoid installing the unit wherever is under direct sunlight or near hot air
vent. Please note that the normal working temperature of the unit is
between -5℃ to +50℃. If the internal temperature of the vehicle is
extremely high, a short cooling down period is necessary before
operating the unit.
If the temperature inside the car is very low and the monitor is used
soon after switching on the heater, moisture may form on the panel of
the unit. Turn off the unit immediately! Failure to do so may cause the
internal components to short. Allow the unit to rest for about one hour to
allow the condensation to disappear before continue operation.
In extremely cold temperatures, the movement of the picture may be
slow and the picture may be dark. It is not a malfunction. The unit will
work normally once it reaches its operating temperature.
Do not drop or hit the LCD panel with a hard object, as it may cause
permanent damage to the LCD panel. Should LCD panel break, avoid
touching glass and fluid. If you come in contact with the fluid please
ask for medical attention immediately.
Due to different car specifications, please ensure that the display
monitor is properly located and not obstructing the air-conditioning vent.
Avoid inserting any foreign objects into the slot of the disc Player.
Failure to observe this may cause malfunction due to the precise
mechanism of this unit.
Protect your discs. When you leave the car, be sure to eject the disc
from this unit and store it separately away from direct sun light.
Heat and humidity may damage the disc and you may not be able to
play it again.
Use the supplied screws to fix the monitor metal mounting plate.
§
§
§
§
§
§
§
§
§
§
§
§
2
DVD player features
This player is a Roof Mount 9.2" TFT-LCD Color Display with DVD player
that can be used as a stand-alone display, o r can be integrated into a
mobile multimedia system. This player has the following features:
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
9.2" TFT-LCD color monitor (16:9)
Roof Mounting Application
Pixel(dots):800RGB(W)x480(H)
Wide Viewing angle(up/down/left/right):45/55/65/65
NTSC and PAL Compatible
Adjustable Color/Contrast/Brightness/Tint
Manual Viewing Angle Adjustment
Vertical Adjustable: up/down>150 0
White LED Dome Light
Automotive Startup Protection
Built-in IR Transmitter for IR Wireless Headphone
IR Remote Control
On Screen Display
2xAV Input
1xAV Output
Slot-in DVD mechanism
USB1.1 Host Mode
Memory card port for SD/ MMC/MS
Capability to read: DVD Format
/DVD±R/DVD±RW/CD-DA/CD-RW/MP3/VCD/SVCD
Note: Multi-session CDs and 320kbps WMA files can not be played on
this player.
FM Transmitter for listening the audio from your car audio system via
FM radio receiver (setting frequency: 88.1, 88.3, 88.5, 88.7, 88.9, 89.1,
89.3, 89.5, 89.7 MHz and 89.9 MHz)
DVD VIDEO FEATURES
This unit provides the following functions in addition to high image quality and
sound quality of DVD video:
Multi-sound Function
DVD audio can store up to 8 languages for one film. This allows for the selection
of language of ones preference.
3
Multi-angle Function
A DVD video that is filmed from multiple angle which allows you choosing to view
from different perspectives.
Subtitle Function
A DVD video can record subtitles for up to 32 languages to choose from.
DISC PLAYBACK
This DVD player can play the following formats.
About CD Extra discs
A CD Extra disc is a disc in which a total of two sessions have been recorded.
The first session is Audio session and the second session is the Data session.
Your personally-created CDs with more than 2 data sessions recorded cannot be
played on this DVD Video Player.
MP3 Playback
This unit can play back CD-R/CD-RW discs on which MP3 music data have been
recorded.
Region Numbers
The DVD Video System assigns a region number to DVD video player and DVD
disk by Sales area. The DVD video region number is marked on the disk Jacket
as shown below.
Ex.
4
DISPLAY
Item
1
2
3
4
5
6
7
8
9
10
Name
Dome Light
Reset button
Function or Control
Provides an interior light for the vehicle.
Press with a pencil or other narrow-tipped tool to
rest the player.
Power button
Press to turn on or turn off the player
Menu button
Press to open the TFT menu. Press again to select
a menu item.
SRC input source Press to select the video input mode (DVD-IN
button
/USB/ SD/ MMC/ MS, AV IN1, AV IN2,). (When the
units sets in DVD mode, press it can change
USB/SD/MMC/MS mode.)
Press to reduce a value in the menu (such as
▼(VOL-)button
decreasing the volume).
Press to increase a value in the menu (such as
▲(VOL+) button
increasing the volume).
Dome Light switch Move to the ON/OFF position, then press it to turn
the dome light on or off.
Panel open button Press to open the LCD panel.
(SKIP-) button
Press to skip the previous chapter on DVD or track
on CD; Press and hold it to fast reverse playback
at 2x, 4x, 8x, 16x and 32x speeds.
5
Item
11
12
13
14
15
16
17
18
Name
(SKIP+) button
Function or Control
Press to skip the next chapter on DVD or track on
CD; Press and hold it to fast forward playback at
2x, 4x, 8x, 16x and 32x speeds
Stop button
Press to stop playback, press [PLAY] or [ENTER]
button to start playing at the last position; Press
[STOP] button twice to fully stop playback, Press
[PLAY] or [ENTER] button to start playing at the
beginning of DVD.
Press to play or pause a disc.
Play or Pause
Eject button
Press to eject the disc.
IR window
Receives IR signals from the remote control and
sends IR signals to IR wireless headphone.
Fixing holes
Connect the player to the mounting plate with
screws inserted into these holes.
LCD screen shut off Press to turn off the LCD screen
switch
Disc slot
Insert the disc into this slot.
1. USB socket: connect USB storage to the player.
2. Memory card socket: connect the memory card (SD/MMC/MS) to the player.
6
REMOTE CONTROL
Item
1
2
Name
Power
Setup
3
4
5
Mute
Eject
0-9
6
7
8
Previous
Play or Pause
Audio
Function or control
Press to turn the player on or off.
Press to access the setup menu to modify the
DVD player settings.
Press to turn the sound on or off.
Press to eject the disc.
Press to enter numbers directly, such as for
settings or track numbers.
Press to go to the previous chapter on DVD or
track on CD.
Press to play or pause the CD or DVD.
DVD: press to change the audio language during
DVD playback.
VCD/CD: press to change the audio channel
(Left, Right and stereo) during VCD and CD
playback.
7
Item
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
8
Name
Function or control
Arrow and ENTER Press to navigate in a menu and change setting
buttons
values.
Press to fast reverse playback at 2x, 4x, 8x,16x
FR
and 32x speeds.
Random
Press to play chapters or tracks in random order.
A-B
Press to repeat playback from point A to point B.
SRC
Press to select the video input mode (DVD-IN
/USB/ SD/ MMC/ MS, AV IN1, AV IN2,). (When
the units sets in DVD mode, press it can change
USB/SD/MMC/MS mode.)
Return
Press to return the main menu, press again to
return the last position of playback.
Angle
Press to select a different filming angle. This
feature only works if the DVD is recorded with
multiple angles.
Zoom
Press to set the zoom for movie viewing.
Repeat
Press to repeats the track or the entire disc.
Title
Press to view the DVD disc’
s title menu.
Press to fast forward playback at 2x, 4x, 8x,16x
(FF)
and 32x speeds.
Subtitle
Press to select and turn on subtitles during
playback.
Menu
Press to view the DVD disc’
s main menu.
VOL - / VOL+
Press to decrease / increase the volume.
Press to go to the next chapter on DVD or track
Next
on CD.
Stop
Press to stop playback, press [PLAY] or
[ENTER] button to start playing at the last
position; Press [STOP] button twice to fully stop
playback, Press [PLAY] or [ENTER] button to
start playing at the beginning of DVD.
Display
Press to display the playback information (such
as title, chapter, track and time).
Goto
Press to start playback at a selected chapter,
track or time.
Setting up your DVD player
PACKAGE CONTENTS
Name of parts
Quantity
Player
1
IR remote control with battery
1
AV cable
1
ST4.2x16 screw
6
CM 4x8 screw
4
Metal mounting plate
1
User’s manual
1
Rubber gasket
1
Use only the contents of this package to install and use the DVD
player. Use of any accessories not provided with this player may
result in damage to the player.
9
Installing your DVD player
Note: Do not attempt to install or service your player by yourself. Installation or
servicing of the player by persons without training and experience in electronic
equipment and automotive accessories may be dangerous and could expose
you to the risk of electric shock or other hazards.
Wiring and connections
10
1. Battery + lead (Yellow)
To connect the positive terminal of the car battery.
2. ACC Power Lead (Red)
To ACC power lead powered when engine key position is ACC.
3. Ground Lead (Black)
Connect the lead to a good chassis ground on the car. Make sure the
connection is made to bare metal and is securely fastened .
4. Door wire
This lead is to be connected to the door pin of the vehicle. This allows the
dome light to be switched by opening or closing door.
5. FM Antenna
This antenna send the signal to FM receiver.
6. AUX A/V, Input 1
7. AUX A/V, Input 2
8. AUX A/V, Output
An auxiliary A/V output is provided to drive an external monitor. This signal
mirrors what’s being shown on this player. The volume function does not
affect the Auxiliary A/V Output.
9. Polarity switch
Please slide to “-”at the left position if your vehicle’s door trigger is negative;
Please slide to “+”at the right position if your vehicle’s door trigger is positive.
Notes: Please slide it to a side securely. Do you allow the switch to rest in the
middle of the selections.
11
To install the player
1. Make sure that what kind of power system your car is. Please slide to “-”at the
left position if your Vehicle’s power supply system is negative;
Please slide to “+”at the right position if your vehicle’s power supply system is
positive.
Notes: 1.Please slide it to a side fully.
2. Do not slide this switch after Place it at a position. Otherwise, it’ll be
damaged.
2. To prevent short circuits, remove the key from the ignition and disconnect he
terminal of battery.
3. Disconnect the original dome light.
4. Attach the metal mounting plate to the roof Using the ST4.2*16 screws.
Note: Do not to cover the original dome light opening.
Six Screw ST4.2*16
5. Pull out the original dome light Power wire and Signal/power Cable through
the original dome light opening.
6. Place the rubber on the player
7. Connect input and output cables.
8. Connect the wire harness in the following order: ground wire, battery wire,
ACC wire and door wire.
12
9. Attach the DVD player to the metal mounting plate using the CM 4x8 screws.
Four CM4*8 screws
10. Reconnect the terminal of the battery.
Notes:
§ Always connect the red wire to the ACC of the ignition switch. Or the battery
charge might be drained off prematurely.
§ If the fuse is blown, first make sure that the cables have not caused a short
circuit, and then replace the old fuse with a new one of the same ratings.
§ Do not have unconnected cables or terminals touch the metal on the car or
any other conducting material. Always isolate and insulate unused leads.
§ To prevent short circuits, do not remove the caps from unused terminals or
from the ends of the unconnected cables.
§ After the display unit is installed, check and make sure the brake lights,
blinkers, wiper, etc. on the vehicle are working properly.
§ Insulate unconnected wires with vinyl tape or other similar material.
13
Using your DVD player
Adjusting the DVD player
To open the DVD player
1. Press Open Button to unlock the LCD panel.
OPEN BUTTON
2. Swing the DVD player downward to the desired angle.
Caution
The LCD display opens to a maximum angle of 150°degrees. Do
not attempt to open it further.
150°
To close the DVD player
l Swing the LCD panel upward until you hear the lock click.
close
CAUTION
14
Make sure that cords and other items do not get caught in the panel
when you close it.
For your safety, be sure to close the LCD panel when not use it.
Using remote control
1. Pull out the battery holder.
Follow the arrow 1 slide it to the right toward the battery while at the same
time pull the battery holder away from the remote control.
2. Place the battery.
Place the new lithium battery with the (+) side up. (The type of battery:
Crd2025)
3. Push the holder back.
Using the finger to push in the holder back until the locking sound is heard.
4. Aim the IR Remote Control directly at the DVD player, then press any button.
Note
§
§
§
§
Use the remote control only inside the vehicle
Use the IR Remote Control no further than five feet (3 meter) from
the sensor.
Direct sunlight or very bright light reduces sensitivity to the remote
signal commands. Be sure the player is not located in direct
sunlight.
Any obstruction between the remote sensor and remote control
may disrupt reception.
15
Replacing the battery
If the remote control does not function, or if the operating range becomes
reduced, replace the old battery with new one.
Note
§
§
§
Dispose used battery properly.
Do not misuse battery by shorting the positive + and - negative
terminal or put into fire which may cause the battery to explode.
Battery and battery holder can be a choking hazard. Keep the
remote control away from young children.
Basic operation
Turning on the player
Press the [ ] button on the remote control or on the front panel to turn on the
player, and the input source and format are displayed on the screen:
Input source name
DVD-IN
The system of the input source
NTSC
detected automatically
Notes: 1.The default is DVD-IN.
2. If the message “NO DISC”is displayed on the screen, insert Disc Media
or press SRC button to change input source.
Selecting the input source
1. During Power ON, press SRC button to switch from one mode to another.
2. The operating modes changes in the following order.
DVD-IN > AV 1> AV2> DVD-IN
Note: DVD Disc cannot be inserted if product switched to AV mode.
16
Turning off the player
Press the
button again, the player will be turned off.
1. If there is a disc media in the player, it will continue playback from last
position the next time you turn the player on.
2. DVD Disc cannot be ejected if player is switched off.
Playing a disc
1. If the input source isn’t already set to DVD-IN, press SRC button to change
the input source to DVD-IN
2. Insert a disc to DVD into the disc slot on the right of the player. After several
seconds, the screen displays the message “loading”.
3. Press Play/Pause button or ENTER button.
To stop playback, press STOP button.
To play the previous track or chapter, press Previous button.
To play the next track or chapter, press Next button.
To pause or resume playback, press Play/Pause button.
4. Press Eject button to eject the disc from the player.
5. Press Power button to turn off the player.
Muting the sound
1. Press MUTE button to mute the sound during disc playback.
2. Press MUTE button again to enable sound.
Playing DVDs
Accessing the DVD root menu
Press MENU button during the playback to display the menu.
A DVD is divided into sections called titles and chapters. When you play a
DVD, a root menu of the disc appears on the screen of your Monitor. The
contents of the menu vary from disc to disc. Press MENU during playback to
display the menu again. Some DVDs only allow you to select disc playback
options using the DVD root menu.
Displaying playback information
During the playback, press DISPLAY button continuously to show the
followings:
17
Changing the audio language during Playback (Multi Audio)
1. Press AUDIO button to change audio track during DVD playback. The
current audio language number, the total number of available audio
channels (languages) and current language are displayed.
2. If there are multiple languages are available, press AUDIO button again to
cycle through the available languages. The audio display disappears
automatically if AUDIO button is not pressed again within 3 seconds.
Note
Some DVDs only allow access to this function through the DVD
menu.
Turning the subtitles and changing the subtitle Language on:
1. Press SUBTITLE button to change the subtitle language you want during
DVD Playback. The current language number, the total number of the subtitle
languages and current language are displayed.
2. If multiple languages are available, press SUBTITLE button again to cycle
through the available languages.
3. To turn subtitles off, Press SUBTITLE button until “subtitle off”appears on the
screen. The subtitle display disappears automatically if SUBTITLE button is not
pressed again within 3 seconds.
Note
Some DVDs only allow access to this function through the DVD menu.
Using Repeat Playback
To repeat a chapter, a title, or both:
During playback, press REPEAT repeatedly to cycle through the available
settings:
§ Chapter---Repeats the current chapter.
§ Title---Repeats the current title.
§ All---Repeats all chapters and titles.
§ Off---Resumes normal playback
18
To repeat a custom segment:
1. During playback, press A-B to set the starting point “A”.
2. Press A-B again to set the ending point “B”. The player plays the
segment between point A and point B repeatedly.
3. To cancel the repeat playback and resume normal playback, press A-B
again.
Changing Viewing Angle during Playback (Multi-Angle)
To change viewing angle:
1. Press ANGLE button to cycle through available viewing Angles during DVD
playback. The current angle number and the total number of angles available
appear on the screen.
2. Press ANGLE button again to select a different angle, then press it again to
exit and return to the normal viewing angle. The Angle display disappears
automatically if ANGLE button is not pressed again within 3 seconds.
Note: Viewing angles are available for a DVD if the back of the DVD jacket
contains a multiple angles icon.
Using zoom
During disc playback, press ZOOM to switch through the available zoom
settings. (2x,3x,4x,1/2x,1/3x,1/4x and normal)
While viewing JPG/JPEG images on a disc, press ZOOM, then press FF or
FR to switch the zoom settings.
Playing audio CDs
To display playing time and the current track:
During CD playback, press DISPLAY button to display, the disc type, current
time, current track number and total number of the tracks are displayed on the
screen.
To repeat a track or the entire CD:
During playback, press REPEAT repeatedly to cycle through the available
settings:
§ Track---Repeats the current track.
§ All---Repeats the entire CD.
§ Off--- Resume normal playback.
To repeat a custom segment:
1. During playback, press A-B to set the starting point “A”.
2. Press A-B again to set the ending point “B”. The player plays the
segment between point A and point B repeatedly.
2. To cancel the repeat playback and resume normal playback, press A-B
again.
19
Playing MP3 CDs
MP3 is a format for storing digital audio. An audio track is compressed into the
MP3 format with little loss of audio quality, while taking up much less disc space.
This player can play CD-R/RW disc that contain music MP3 files.
When a MP3 disc is inserted into the player, the menu screen appears
automatically. You can use the menu screen to select the folders and tracks
you want, or the player plays the tracks in the order they were burned onto the
disc.
To select the folders and tracks you want:
1. Press DISPLAY on the remote control. The list of files and folders opens.
2. Press the up or down button on the remote control to select a folder from the
list, then press ENTER. The screen displays the files in the folder you
selected.
20
3. Press the up or down button on the remote control to select a file, then press
ENTER to play the file.
4. Press the
to move to the next file.
to move to the previous file.
Or press the
5. Press the < button to go to the previous folder or to page up, or press the >
button to page down.
To repeat a file or folder of an MP3 disc:
During MP3 playback, press the REPEAT button to cycle through the available
settings:
§
§
§
Repeat single---Repeats the current file.
Repeat All---Repeats the contents of current folder.
Repeat off---Turns off repeat and resumes normal playback.
22
Note
This icon in front of an item indicates it’s a folder.
This icon in front of an item indicates it’s an MP3 file.
Using the USB storage and memory card
1. Follow arrow 1 to open the rubber cover when you want to use the USB
storage device or the memory card.
2. Follow arrow 2 to put the rubber cover back when you are done using the
USB storage device or memory card.
21
Connecting to the USB storage
1. Inserting the USB storage into the USB socket of the main unit.
2. When the unit sets is in DVD mode, pressing SRC on the remote control for
more than one second will change the mode from DVD to USB, then the
main unit will read the contents of USB storage automatically.
Note: 1.The USB terminal of the main unit only supports USB 1.1.
2. The USB player does not support all USB devices.
Connecting to the memory card (SD/MMC/MS)
1. Inserting the memory card into the memory socket of the main unit.
2. When the unit is in DVD mode, pressing SRC on the remote control for more
than one second will change the mode from DVD to memory card, then the
main unit will read the contents of memory card automatically.
Note: 1. Please insert the memory card in the correct direction. Do not force the
card.
2. Not all types of memory cards are supported by this player.
22
System setup
Changing the picture quality and setting the frequency of FM transmitter
Accessing the menu
To adjust the picture, use the menu button to select the features you would like
to adjust. Adjustment selections are as follows.
1. Press and hold MENU on the remote control for more than one second.
The Operation Menu opens.
2. Press MENU repeatedly to select one of the following settings, then press
the < and > button to change the value:
The features are:
Contrast: Adjust the contrast of the picture
Brightness: Adjust the brightness of the picture
Color: Adjust the color of the picture
Tint: Adjust the tint of the picture (it is only available in NTSC system)
Wide Screen: Selects display Mode: Wide (16:9)/ Normal (4:3)
Note: In Wide mode, normal images are stretched horizontally and are
displayed over the entire screen. In Normal mode, normal images are not
stretched, and displayed without distortion.
LAC Enable: Low angle compensation, if it is on, the picture looks like very
smooth
FMT Freq: you can select the frequency for FM transmitter: 88.1, 88.3, 88.5,
88.7, 88.9, 89.1, 9.3, 89.5, 89.7 MHz and 89.9 MHz regarding to the frequency
of your radio receiver or FM headphone,
RESET: Reset menu to default value
23
Using FM transmitter
To use the FM transmitter for audio:
1. Press and hold MENU on the remote control for more than one second. The
Operation MENU opens.
2. Press MENU repeatedly to select FMT Freq, then press the < and > buttons
to change the frequency.
3. Exit the menu.
4. Tune your FM radio to match the frequency to the frequency you set in step
2 .Audio from the player is received by the FM radio.
Using the OSD menu
Press SETUP on the remote control, the OSD menu opens.
Menu
General setup page
Speaker setup page
24
Description
TV DISPLAY: modifies the display if it doesn’
t match the width to
height ratio the DVD uses. You can select from the following:
・NORMAL/PS
・NORMAL/LB
・WIDE
ANGLE MARK: Selects a different angle if the back of the
DVD jacket contains a multiple angles icon. You can select ON
or OFF.
OSD LANG: Selects a language for DVD play menu. You can
select from following:
・ENGLISH ・FRENCH ・SPANISH・ITALIAN
CAPTIONS: Selects the caption for DVD play. You can select
ON or OFF.
SCREEN SAVER: Protects the screen if it paused about 5
minutes. You can select ON or OFF.
LOGO TYPE: Selects different start LOGO picture. You can
select Default and LOGO Captured.
DOWNMIX: Applies to Dolby digital sound. You can select
from following:
・LT/RT
・STEREO
DUAL MONO: Selects the different channels of sound. You
can select from following:
・STEREO ・L-MONO ・R-MONO ・MIX-MONO
DYNAMIC: Selects the different rating level of dB. You can
select from following:
・FULL ・3/4 ・1/2 ・1/4 ・OFF
Preference page
TV TYPE: Selects the TV system .You can select from
following:
・PAL
・AUTO
・NTSC
AUDIO: Selects the audio track language. You can select from
following:
・ENGLISH・FRENCH・SPANISH・GERMAN・CHINESE
・RUSSIAN・THAI
SUBTITLE: Selects the language of the subtitles displayed on
the screen. You can select from following:
・ENGLISH・FRENCH・SPANISH・GERMAN・CHINESE
・RUSSIAN・THAI ・OFF
DISC MENU: Selects the language of the current disc. You
can select from following:
・ENGLISH・FRENCH・SPANISH・GERMAN・CHINESE
・RUSSIAN・THAI
PARENTAL: Restricts the viewing of movies to children of
appropriate age levels only. You can select 1 to 8.
1=KID SAF (safe for children)
2=G (general audience)
3=PG (parental guidance suggested)
4=PG 13 (some material unsuitable for children under 13)
5=PGR (some material unsuitable for children under 17)
6=R (some material unsuitable for children under 17)
7=NC 17 (not recommended viewing for children under 17)
8=ADULT (default setting. Only for adults due to graphic
content. )
After you select the parental setting, press ENTER, then enter
the 4-digit password (default is 3308). Press ENTER again to
confirm.
PASSWORD: Lets you change the 4-digit password using the
number keys on the remote control. The default password is
3308, but no longer works after you change the password.
DEFAULT: Resets all settings to the factory defaults.
Note: After you input some pictures to the player as LOGO picture, select Captured in
LOGO TYPE menu, then you can use SUBTITLE key on the remote control to change the
start LOGO picture one by one. Select Default in LOGO TYPE menu to recover the default
start LOGO picture.
25
Customizing DVD settings
To set the general setup page:
1 Press SETUP button on the remote control. The DVD setup menu opens.
2 Press < or > to select General setup page, then the list opens.
3 Press the ∧ or ∨ to select the desired setting item. The items include TV
DISPLAY, ANGLE MARK, OSD LANG, CAPTIONS, SCREEN SAVER and
LOGO TYPE.
4 Press ENTER to open the list, then press ∧ or ∨ to choose the setting
values.
5 Press ENTER to confirm.
6 Press SETUP to exit the setup menu.
To set the speaker setup page:
1 Press SETUP button on the remote control. The DVD setup menu opens.
2 Press < or > to select speaker setup page, then the list opens.
3 Press ∧ or ∨ to select the desired setting item, The items include
DOWNMIX, DUAL MONO and DYNAMIC.
4 Press ENTER to open the list, then press ∧ or ∨ to choose the setting
values.
5 Press ENTER to confirm.
6 Press SETUP to exit the setup menu.
To set the preference page:
1 This setting is only available in stop mode or when no disc in the player.
2 Press SETUP button on the remote control. The DVD setup menu opens.
3 Press < or > to select preference page, then the list opens.
4 Press ∧ or ∨ to select the desired setting item. The items include TV
TYPE, AUDIO, SUBTITLE, DISC MENU, PARENTAL, PASSWORD and
DEFAULT .
5 Press ENTER to open the list, then press ∧ or ∨ to choose the setting
values.
6 Press ENTER to confirm.
7 Press SETUP to exit the setup menu.
26
Troubleshooting
If operation freezes, the screen goes black or the unit should otherwise not
function properly, try turning the unit on and off. If the unit does not respond,
press the reset switch on the Front Panel.
Problem
Cause
Disc inserted incorrectly
Player does not
Disc format is not
play disc
supported
Disc is dirty or scratched
The player
suddenly
stopped working Player error
or the screen
went black
Solution
Reinsert the disc with the
label side up (facing the
ceiling).
Check the disc format.
Clean or replace the disc.
Try turning the player off
and on. If the player still
doesn’
t respond, press the
reset button.
Insert the key into the
ignition and turn it to
Player doesn’t
ACC/Accessory.
turn on
Wait for about one hour or
Condensation in the player until condensation
evaporates.
Battery needs replacing
Replace the battery.
Clean the player’
s and the
Dirty IR window on the
Player operates
remote control’s IR
Player or remote control
erratically
windows.
Check and tighten all
Loose connections
connections.
Picture Skips
Disc is dirty or scratched
Clean or replace the disc .
Occasions
The car ignition (or
ACC/Accessory) is off
Blur picture on
the screen.
Interfered by
short-distanced strong
interference.
(E.g. high voltage wire,
transformation station or
aircraft etc… )
Move the vehicle away
from the interference.
27
Problem
Cause
Solution
1. This is the
characteristics of LCD
display in low
temperature, it will
restore to normal
brightness after starting
the display for few
minutes.
2.Adjust the brightness
setting.
The picture on
the screen is
dark.
1. The equipment locates
at a low temperature
area.
2. Brightness is set too
low.
No sound can
be heard from
the IR wireless
headphones.
1. Headphones are not
1.Turn on the headphones.
turn on.
2.Replace or recharge the
2. The battery in the
batteries.
headphone is low.
3. There is object blocking 3.Remove the blocking
object or move back to
the transmitting module
the receiving area.
or beyond the effective
receiving area.
Specifications
Design and specifications are subject to change without notice.
Power Source
Vehicle battery (DC +10V ~ +16V)
Operating Voltage
DC +14V
Mechanism
Manual Open / Close
Display Angle
Vertical Adjustable: Up/Down > 150°
Pixel
800RGB(W)x480(H)
Viewing angle(up/down/left/right) 45/55/65/65
Operating current
<2000mA(Typical VDD=14V)
Dome Light
<2W
Operation Temperature
-5℃ to +50℃
Storage Temperature
-20°C to +70°C
28
Maintaining
Handling discs
§ To keep a disc clean, do not touch the play side (non-label side) of the disc.
§ Do not attach paper or tape to the disc.
§
§
Keep the disc away from direct sunlight or heat source.
Store the disc in a disc case after playback.
Cleaning discs
§ Before playback, wipe the disc outwards from the center with clean cloth.
LCD Panel Maintenance
§
§
§
Wipe off any dust gently with a soft, dry cloth.
The surface is easily scratched; do not rub it with hard objects.
Do not use any chemical solvent, cleaning agent or corrosive detergent to
clean away dirt on the surface of the screen.
29