SDI DA VSE-3901 DESCRIPTION FEATURES

SDI DA VSE-3901 DESCRIPTION FEATURES
SDI DA
VSE-3901
DESCRIPTION
FEATURES
USER CONTROL VARIABLES / CARD EDGE INDICATORS
Setup
Status
Lock Rate
Alarms
Signal
143, 177, 270, 360, 540 Mb/s, Pass
High, Low
Locked, Not Locked, Pass, No data
Input signal types: SMPTE 259M, 344M, DVB-ASI
Differential input, transformer coupled inputs and outputs
8 re-clocked and auto-equalized outputs
Automatic or manual set of the reclock rate at 143 / 277/
270 / 360 /_540 Mb/s
Automatic bypass if unable to lock at the above rates
Forced bypass capability available
ASI compliant
Command Control System (CCS) Enabled
Provides real-time information on the following
– Signal presence, reclock rate, bypass, regulator output
DejaView intelligent settings recovery system
OUT1
SPECIFICATIONS
Power Consumption
Temperature
SERIAL VIDEO INPUT
Standards
Number of inputs
Input connector
Input impedance
Input coupling
Maximum input level
Return loss
Equalization
Delay
<4W
0° C to 50° C (32° F to 122° F)
SMPTE 259M, SMPTE 344M, DVB-ASI
1
BNC per IEC 169-8
75 W
AC
800mV
>18 dB from 5 MHz to 360 Mhz
>15 dB to 540 MHz
Automatic cable equalization
< 15 nS
For more information visit www.leitch.com
Serial Distribution Amplifier, Equalizing / Auto Reclocking - 143,
177, 270, 540 Mb/s
See the CCS (Command Control System™) section of this catalog for detailed explanations of
applications and remote control panels applicable to the NEO product line. Leitch's CCS offers
applications such as Pilot™ that provide the tools you need to configure, control, monitor,
diagnose, and provide secure access to the equipment on your network regardless of your
network topology.
NEO
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
INPUT
Specifications and designs are subject to change without notice.
ORDERING INFORMATION
VSE-3901
OUT2
VSE-3901
The VSE-3901 offers a digital distribution amplifier supporting a variety of compressed and
uncompressed serial digital signals. Standards supported are SMPTE 259M, SMPTE 344M,
DVB-ASI at clock rates of 143, 177, 270, 360 and 540 Mb/s. SMPTE 310M 19.39 Mb/s can
pass through this distribution amplifier in bypass mode. It provides 8 re-clocked and
equalized outputs. This module, as is the case with all modules in the NEO family, can be
controlled locally via a front-edge display or by remote communications allowing for remote
control, monitoring and diagnostics using hardware control panels and/or a GUI.
SERIAL VIDEO OUTPUT
Standards
Number of outputs
Output connector
Output impedance
Output return loss
Signal level
DC offset
Rise and fall times
Overshoot
Jitter
SMPTE 259M, SMPTE 344M, DVB-ASI serial ouput over coax cable
8
BNC per IEC 169-8
75 W
>18 dB over a frequency range of 5 MHz to 560 MHz
800 mV (±10%)
0 V (+ 0.5 V)
600 - 700 ps
< 10%
< 300 ps peak-to-peak
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement