MaxPower Corporation CoolCube 10 Specifications

Expertise and Excellence in Electrophoresis
Product Catalogue 2010/11
www.cleaverscientific.com
Since its establishment in
2004, Cleaver Scientific
Limited, a private familyowned company, has
grown into the UK’s
largest manufacturer of
electrophoresis gel tanks
and radiation safety
equipment.
By using the latest state-of-the-art injection
moulding manufacturing techniques, Cleaver
Scientific has developed a range of
electrophoresis products acclaimed for their
technical excellence in more than 80
countries worldwide. Each electrophoresis
gel tank incorporates the best and most
popular features identified within the market
by end-users, is CE-marked for safety and
manufactured using the highest grade
industrial materials noted for their durability
and chemical resistance. This is coupled
with the expertise and focus of a product
development team whose combined
experience exceeds four decades within the
use, manufacture, sales, support and
promotion of electrophoresis products.
new
product
focus
Battery Gel
– low-cost and completely
safe as no power supply is
required - the perfect
system for education
(page 11)
MULTISUB-4
– by allowing you to run 4
horizontal gels within a
single tank, this system is
ideal for high throughput
genotyping studies in
laboratories where bench
space is limited (page 13)
Vertical
External
Casters
– maximise your
electrophoretic throughput with our
external casting units that allow the
gel tank to remain constantly in use
(pages 22, 23, 24 and 32)
Gel Documentation
– introducing two new inexpensive, easy
to use, high resolution CCD gel
documentation systems with
recommended software (pages 40 and 41)
UV Crosslinkers
Cleaver Scientific is also an internationally
recognised brand name for many general
laboratory products, ranging from dry baths
to gel documentation systems. Our ongoing
commitment to the improvement of our
products and systems enabled us to acquire
ISO9001 accreditation in 2006, when the
Company also received the UK Government
Trade and Investment Award for Export.
– ideal for fast hybridisation of
nucleic acids to membranes
(page 42)
Horizontal and Vertical
Package Deals
– whether you are a distributor looking for a
package to compete with the market leader or an
end-user wanting a system for a specific
application, Cleaver Scientific will meet your needs
with its horizontal and vertical electrophoresis
Combination Packages (pages 16 and 32)
contents
multiSUB Horizontal Gel Systems
page 4
multiSUB Horizontal Gel Accessories
page 14
Horizontal Gel Systems - special applications
page 18
omniPAGE Vertical Slab Gel Systems
page 20
omniPAGE Vertical Slab - special applications
page 27
Electrophoresis Equipment and Accessories
page 30
Blotting
page 34
Power Supplies
page 38
Gel Documentation
page 40
General Lab Equipment
page 43
Radiation Safety
page 50
see pages
16/17 for
multSUB
package
deals
see pages
32/33 for
omniPAGE
package
deals
For full index please refer to back cover.
3
multiSUB....
■ Injection Moulded Construction - durable, leak-proof
environment for complete safety and long life
■ Cassette Type Electrodes – inexpensive, easy to replace.
Made of 99.99% corrosion resistant, pure platinum
■ Electrical Safety – lid can be located in one way only. On
removal, power is disconnected from buffer chamber
■ Multiple Gel Trays – eliminate the need for additional gel
tanks
■ Easy Click Lid Removal
“plug and go” gel casting
choic
Casting dams allow gels to
be rapidly cast externally
while the MultiSub unit is in
use for gel running
NEW-style Flexicasters allow
the casting of varying gel
lengths simply by locking the
moveable dam. Adjustable
feet and level bubble allow
gels of uniform thickness to
be poured.
Extensive range of combs
Trays are UV
transparent
White PVC platform
cover and red loading
guides can be
optionally applied to
enhance well visibility
Gel trays are free of indentations or casting gate channels
which can interfere with sample progression
UV transparent Gel Scoops,
available for each unit size, offer a
safe and easy way to transport
gels to a UV Transilluminator
4
All units are CE marked and are in conformity with the relevant CE Safety Directives:
73/23/EEC: LOW VOLTAGE DIRECTIVE: IEC 61010-1:2001. EN 61010-1:2001;
89/336/EEC EMC DIRECTIVE: EN55011 Emissions, EN50082-1 Immunity.
• four thicknesses, colour coded
black: 0.75mm for ultra resolved bands
white: 1mm supplied as standard
red:
1.5mm for maximising
sample volume
blue: 2mm for maximising
sample volume
• options for Sample Prep
• options for MULTI-CHANNEL
PIPETTE COMPATIBLE
The number of samples can be maximised using high tooth number combs
S E T T I N G A N E W S TA N D A R D I N HORIZONTAL ELECTROPHORESIS
Corrosion
resistant gold
plated lid
terminals
Retractable
connectors
compatible with
most major power
supplies
maxi
midi
mini
The multiSUB series of Horizontal Gel Units offers the most versatile
solution for DNA and RNA agarose gel electrophoresis currently available.
All five units offer an unsurpassed combination of economy of gel and buffer
volume, with gel size and sample number versatility. Gel size and sample number
requirements can be exactly matched in each unit, with the option of additional
gel tray sizes. This eliminates the need for multiple gel tanks and for changes in
gel size or application.
All units contain removable UV transparent trays. For optimum value and
versatility, systems are available with one, two or three tray options (dependent
on model). Easy to use, leak proof ‘plug and go’ gel casting dams are included as
standard to allow gels to be rapidly cast whilst the multiSUB unit is in use for gel
running. With no indentations or casting gate grooves in the tray to interfere with
sample progression, traditional tape casting can be used, should this be
preferred.
Although lid connectors are compatible with most major power supplies, adapters
are available to provide complete compatibility.
high efficiency horizontal gel cooling
Removable gel table allows a Coolpack to sit above the gel in
buffer offering enhanced gel resolution and faster run times
5
multiSUB mini
■ Available with 7 x 7cm, 7 x
Typical Applications
10cm or with both gel trays
■ Economic low gel and buffer
volumes
■ Small lab bench footprint
Designed for quick
checks of low to
medium numbers
of samples
Buffer saver blocks
physically reduce the
volume of a gel chamber
and so reduce buffer
requirements, saving cost.
The multiSUB Mini is the smallest unit in the range, designed for low to
medium numbers of samples. The small gel size maximises run economy
but does not compromise versatility as two tray options are available –
7 x 7cm and 7 x 10cm, and combs ranging from preparative up to 16
samples. Simply by altering the gel tray or comb, this compact unit is
capable of resolving up to 64 different samples, prepping 1ml of sample
or separating sample bands over a distance of 9cm.
TECHNICAL SPECIFICATIONS
Ordering Information
GEL DIMENSIONS,
(W X L)
7 X 7CM
7 X 10CM
MSMINI7
multiSUB Mini, 7 x 7cm UV Tray, 2 x 8 sample combs, loading guides and dams
MSMINI10
multiSUB Mini, 7 x 10cm UV Tray, 2 x 8 sample combs, loading guides and dams
UNIT DIMENSIONS
(W X L X H)
21 X 9 X 9CM
MSMINIDUO multiSUB Mini, 7 x 7cm & 7 x 10cm UV Tray, 2 x 8 sample combs, loading guides and dams
MS7-UV7
7 x 7cm UV Tray
MS7-LG
Adhesive Loading Guides
MAX. SAMPLE
7 X 7CM TRAY – 32 SAMPLES
7 X 10CM TRAY – 64 SAMPLES
MS7-UV10
7 x 10cm UV Tray
MS7-WP
Viewing Platform
Loading Guide
225ML
MS7-PE
Positive Electrode
MSMINICP
Cool-pack and Platform
x = comb well no.
MS7-NE
Negative Electrode
MSMINIBSB Buffer Saver Blocks, pk/2
CAPACITY
BUFFER VOLUME
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
Code
0.75mm
MS7-1-0.75
1, 2, 4, 8MC, 8, 10, 12MC, 16
0.75, 1, 1.5, 2MM
Description
MS7-UVDAM Casting Dams
MS7/10-FC
Sample Volume for
a 5mm thick gel
Comb Prep 1, Marker 1, 0.75mm thick
Comb Prep 2, Marker 2, 0.75mm thick
Comb Prep 4, Marker 2, 0.75mm thick
Comb 8 sample MC, 0.75mm thick
Comb 8 sample, 0.75mm thick
Comb 10 sample, 0.75mm thick
Comb 12 sample MC, 0.75mm thick
Comb 16 sample, 0.75mm thick
152µl
68µl
36µl
8µl
19µl
14µl
10µl
7µl
MS7-2-1
MS7-4-1
MS7-8MC-1
MS7-8-1
MS7-10-1
MS7-12MC-1
MS7-16-1
Comb Prep 1, Marker 1, 1mm thick
Comb Prep 2, Marker 2, 1mm thick
Comb Prep 4, Marker 2, 1mm thick
Comb 8 sample MC, 1mm thick
Comb 8 sample, 1mm thick
Comb 10 sample, 1mm thick
Comb 12 sample MC, 1mm thick
Comb 16 sample, 1mm thick
203µl
90µl
48µl
11µl
25µl
18µl
14µl
10µl
combs
MS7-x -yLG Combination Comb and
y = comb thickness
saves 100ml of buffer
MS7-UVS
7cm UV Gel Scoop
multiSUB Mini/Midi Flexi caster
MS7-2-0.75
MS7-4-0.75
MS7-8MC-0.75
MS7-8-0.75
MS7-10-0.75
MS7-12MC-0.75
MS7-16-0.75
1.0mm
MS7-1-1
6
components of multiSUB Mini Duo
Code
1.5mm
MS7-1-1.5
Sample Volume for
a 5mm thick gel
Description
MS7-2-1.5
MS7-4-1.5
MS7-8MC-1.5
MS7-8-1.5
MS7-10-1.5
MS7-12MC-1.5
MS7-16-1.5
Comb Prep 1, Marker 1, 1.5mm thick
Comb Prep 2, Marker 2, 1.5mm thick
Comb Prep 4, Marker 2, 1.5mm thick
Comb 8 sample MC, 1.5mm thick
Comb 8 sample, 1.5mm thick
Comb 10 sample, 1.5mm thick
Comb 12 sample MC, 1.5mm thick
Comb 16 sample, 1.5mm thick
304µl
135µl
72µl
17µl
37µl
27µl
20µl
15µl
MS7-2-2
MS7-4-2
MS7-8MC-2
MS7-8-2
MS7-10-2
MS7-12MC-2
MS7-16-2
Comb Prep 1, Marker 1, 2mm thick
Comb Prep 2, Marker 2, 2mm thick
Comb Prep 4, Marker 2, 2mm thick
Comb 8 sample MC, 2mm thick
Comb 8 sample, 2mm thick
Comb 10 sample, 2mm thick
Comb 12 sample MC, 2mm thick
Comb 16 sample, 2mm thick
405µl
180µl
96µl
23µl
50µl
36µl
27µl
20µl
2.0mm
MS7-1-2
MC = multichannel pipette compatible
multiSUB midi
■ Available with 10 x 7cm,
10 x 10cm or with both gel trays
■ Run up to 100 samples
■ Low buffer volumes
■ Ideal for rapid electrophoresis
Typical Applications
Ideal for quick
checks of samples
from PCR and
cloning
Loading guides allow
easy well identification
and sample loading
Scoops for safe
transfer of gels
for Power Supplies
and Product Selector
see page 24/25
With gel tray options of 10 x 7cm and 10 x 10cm, the multiSUB Midi has been designed for
routine horizontal gel electrophoresis. Extending only the width of this unit allows more
samples to be resolved per gel than the multiSUB Mini without a significant increase in buffer
or gel volumes.
A maximum of 100 samples per gel can be resolved making this unit ideal for those routinely
checking medium numbers of samples over short to medium gel run lengths.
Ordering Information
TECHNICAL SPECIFICATIONS
MSMIDI7
multiSUB Midi, 10 x 7cm UV Tray, 2 x 16 sample combs, loading guides and dams
MSMIDI10
multiSUB Midi, 10 x 10cm UV Tray, 2 x 16 sample combs, loading guides and dams
GEL DIMENSIONS,
(W X L)
10 X 7CM
10 X 10CM
UNIT DIMENSIONS
(W X L X H)
22 X 12.5 X 9CM
MAX. SAMPLE
CAPACITY
10 X 7CM TRAY – 50 SAMPLES
10 X 10CM TRAY – 100 SAMPLES
BUFFER VOLUME
300ML
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
1, 2, 4, 8, 10MC, 12, 16, 20MC, 25
0.75, 1, 1.5, 2MM
MSMIDIDUO multiSUB Midi, 10 x 7cm & 10 x 10cm UV Tray, 2 x 16 sample combs, loading guides and dams
MS10-UV7
10 x 7cm UV Tray
MS10-LG
Adhesive Loading Guides
MS10-UV10 10 x 10cm UV Tray
MS10-WP
Viewing Platform
Loading Guide
MS10-PE
Positive Electrode
MSMIDICP
Cool-Pack and Platform
x = comb well number,
MS10-NE
Negative Electrode
MSMIDIBSB Buffer Saver Blocks, pk/2
MS10-UVDAMCasting Dams
MS7/10-FC
MS10-x -yLG Combination Comb and
y = comb thickness
saves 100ml of buffer
MS10-UVS
10cm UV Gel Scoop
multiSUB Mini/Midi Flexicaster
Code
0.75mm
MS10-1-0.75
Description
Sample Volume for
a 5mm thick gel
MS10-2-0.75
MS10-4-0.75
MS10-8-0.75
MS10-10MC-0.75
MS10-12-0.75
MS10-16-0.75
MS10-20MC-0.75
MS10-25-0.75
Comb Prep 1, Marker 1, 0.75mm thick
Comb Prep 2, Marker 2, 0.75mm thick
Comb Prep 4, Marker 2, 0.75mm thick
Comb 8 sample, 0.75mm thick
Comb 10 sample MC, 0.75mm thick
Comb 12 sample, 0.75mm thick
Comb 16 sample, 0.75mm thick
Comb 20 sample MC, 0.75mm thick
Comb 25 sample, 0.75mm thick
270µl
118µl
57µl
30µl
20µl
17µl
12µl
10µl
7µl
MS10-2-1
MS10-4-1
MS10-8-1
MS10-10MC-1
MS10-12-1
MS10-16-1
MS10-20MC-1
MS10-25-1
Comb Prep 1, Marker 1, 1mm thick
Comb Prep 2, Marker 2, 1mm thick
Comb Prep 4, Marker 2, 1mm thick
Comb 8 sample, 1mm thick
Comb 10 sample MC, 1mm thick
Comb 12 sample, 1mm thick
Comb 16 sample, 1mm thick
Comb 20 sample MC, 1mm thick
Comb 25 sample, 1mm thick
360µl
158µl
77µl
41µl
27µl
23µl
16µl
14µl
10µl
1.0mm
MS10-1-1
combs
Code
1.5mm
MS10-1-1.5
MS10-2-1.5
MS10-4-1.5
MS10-8-1.5
MS10-10MC-1.5
MS10-12-1.5
MS10-16-1.5
MS10-20MC-1.5
MS10-25-1.5
MS10-1-2
2.0mm
MS10-2-2
MS10-4-2
MS10-8-2
MS10-10MC-2
MS10-12-2
MS10-16-2
MS10-20MC-2
MS10-25-2
Sample Volume for
a 5mm thick gel
Description
Comb Prep 1, Marker 1, 1.5mm thick
Comb Prep 2, Marker 2, 1.5mm thick
Comb Prep 4, Marker 2, 1.5mm thick
Comb 8 sample, 1.5mm thick
Comb 10 sample MC, 1.5mm thick
Comb 12 sample, 1.5mm thick
Comb 16 sample, 1.5mm thick
Comb 20 sample MC, 1.5mm thick
Comb 25 sample, 1.5mm thick
Comb Prep 1, Marker 1, 2mm thick
Comb Prep 2, Marker 2, 2mm thick
Comb Prep 4, Marker 2, 2mm thick
Comb 8 sample, 2mm thick
Comb 10 sample MC, 2mm thick
Comb 12 sample, 2mm thick
Comb 16 sample, 2mm thick
Comb 20 sample MC, 2mm thick
Comb 25 sample, 2mm thick
540µl
236µl
115µl
61µl
41µl
34µl
24µl
20µl
15µl
720µl
315µl
153µl
81µl
54µl
45µl
32µl
27µl
20µl
MC = multichannel pipette compatible
7
multiSUB choice
■ Three tray options
■ Run up to 210 samples
■ Low buffer volumes
■ Multichannel pipette compatible
Typical Applications
combs for speed loading
Ideal for restriction
fragment analysis,
sample prep or checking
of high numbers of
samples
The multiSUB Choice offers a wide degree of versatility. Three tray options
are available – 15 x 7cm, 15 x 10cm and 15 x 15cm – allowing the
choice of one, two or all three gel length options at the time of purchase.
Further purchases of additional accessories are no longer required.
Maximising comb and tray options allow up to 210 samples to be resolved
per gel. The 15cm total run length allows restriction fragment or other
close MW sample bands to be easily separated and identified. Speed
loading is accomplished using 10, 14, 16, 18, 28 and 30 sample multichannel pipette compatible combs. Fabricated multiSUB CHOICE STRETCH
units are available with optional 15 x 20cm and 15 x 25cm gel trays and
four 28-sample combs for those researchers wanting to perform higher
resolution separation of more samples over a longer distance.
TECHNICAL SPECIFICATIONS
GEL DIMENSIONS,
(W X L)
UNIT DIMENSIONS
(W X L X H)
MAX. SAMPLE
BUFFER VOLUME
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
Code
0.75mm
MS15-1-0.75
8
multiSUB
Choice Stretch
Ordering Information
15 X 7CM
15 X 10CM
15 X 15CM
15 X 20CM
15 X 25CM
26.5 X 17.5 X 9CM
41 X 17.5 X 9CM (STRETCH MODELS ONLY)
15 X 7CM TRAY – 70 SAMPLES
15 X 10CM TRAY – 140 SAMPLES
15 X 15CM TRAY – 210 SAMPLES
15 X 15CM TRAY – 280 SAMPLES
15 X 15CM TRAY – 350 SAMPLES
CHOICE
500ML
CHOICE STRETCH
1000ML
MSCHOICE7 multiSUB Choice, 15 x 7cm UV Tray, 2 x 20 sample combs, loading guides and dams
MSCHOICE10 multiSUB Choice, 15 x 10cm UV Tray, 2 x 20 sample combs, loading guides and dams
MSCHOICE15 multiSUB Choice, 15 x 15cm UV Tray, 2 x 20 sample combs, loading guides and dams
MSCHOICETRIOmultiSUB Choice Trio, 15 x 7,10 & 15cm UV Tray, 2 x 20 sample combs, loading guides and dams
MSCHOICEST20 multiSUB Choice Stretch 20, 15 x 20cm UV tray, 4 x 28 sample combs, loading guides and dams
MSCHOICEST25 multiSUB Choice Stretch 25, 15 x 25cm UV tray, 4 x 28 sample combs, loading guides and dams
1, 2, 4, 10, 10MC, 12, 14MC,
16, 18MC, 20, 28MC, 30MC, 35
0.75, 1, 1.5, 2MM
Description
MS15-2-0.75
MS15-4-0.75
MS15-10-0.75
MS15-12-0.75
MS15-20-0.75
MS15-35-0.75
Comb Prep 1, Marker 1, 0.75mm thick
Comb Prep 2, Marker 2, 0.75mm thick
Comb Prep 4, Marker 2, 0.75mm thick
Comb 10 sample, 0.75mm thick
Comb 12 sample, 0.75mm thick
Comb 20 sample, 0.75mm thick
Comb 35 sample, 0.75mm thick
MS15-10MC-0.75
MS15-14MC-0.75
MS15-16MC-0.75
MS15-18MC-0.75
MS15-28MC-0.75
MS15-30MC-0.75
MS15-1-1
MS15-2-1
MS15-4-1
MS15-10-1
MS15-12-1
MS15-20-1
MS15-35-1
MS15-10MC-1
MS15-14MC-1
MS15-16MC-1
MS15-18MC-1
MS15-28MC-1
MS15-30MC-1
Comb 10 sample MC, 0.75mm thick
Comb 14 sample MC, 0.75mm thick
Comb 16 sample MC, 0.75mm thick
Comb 18 sample MC, 0.75mm thick
Comb 28 sample MC, 0.75mm thick
Comb 30 sample MC, 0.75mm thick
Comb Prep 1, Marker 1, 1mm thick
Comb Prep 2, Marker 2, 1mm thick
Comb Prep 4, Marker 2, 1mm thick
Comb 10 sample, 1mm thick
Comb 12 sample, 1mm thick
Comb 20 sample, 1mm thick
Comb 35 sample, 1mm thick
Comb 10 sample MC, 1mm thick
Comb 14 sample MC, 1mm thick
Comb 16 sample MC, 1mm thick
Comb 18 sample MC, 1mm thick
Comb 28 sample MC, 1mm thick
Comb 30 sample MC, 1mm thick
1.0mm
multiSUB Choice Trio
includes all 3 tray
sizes for optimum
versatility and value
MS15-UV7
15 x 7cm UV Tray
MS15-UVDAMCasting Dams
MS15-UVS
MS15-UV10 15 x 10cm UV Tray
MS15-PE
Positive Electrode
MSCHOICECP Cool-Pack and Platform
15cm UV Gel Scoop
MS15-UV15 15 x 15cm UV Tray
MS15-NE
Negative Electrode
MSCHOICEBSB Buffer Saver Blocks pk/2,
MS15-UVST20 15 x 20 cm UV Tray
MS15-LG
Adhesive Loading Guides
MS15-UVST25 15 x 25 cm UV Tray
MS15-WP
Viewing Platform
saves 190ml of buffer
MS15-x -yLG Combi Comb/Loading Guide
MS15/20-FC multiSUB Choice/Maxi Flexi caster
Sample Volume for
a 5mm thick gel
371µl
169µl
91µl
34µl
30µl
16µl
7µl
combs
22µl
22µl
20µl
8µl
8µl
9µl
495µl
225µl
122µl
45µl
41µl
21µl
10µl
29µl
29µl
27µl
11µl
11µl
13µl
Code
1.5mm
MS15-1-1.5
MS15-2-1.5
MS15-4-1.5
MS15-10-1.5
MS15-12-1.5
MS15-20-1.5
MS15-35-1.5
MS15-10MC-1.5
MS15-14MC-1.5
MS15-16MC-1.5
MS15-18MC-1.5
MS15-28MC-1.5
MS15-30MC-1.5
MS15-1-2
MS15-2-2
MS15-4-2
MS15-10-2
MS15-12-2
MS15-20-2
MS15-35-2
MS15-10MC-2
MS15-14MC-2
MS15-16MC-2
MS15-18MC-2
MS15-28MC-2
MS15-30MC-2
2.0mm
Description
Comb Prep 1, Marker 1, 1.5mm thick
Comb Prep 2, Marker 2, 1.5mm thick
Comb Prep 4, Marker 2, 1.5mm thick
Comb 10 sample, 1.5mm thick
Comb 12 sample, 1.5mm thick
Comb 20 sample, 1.5mm thick
Comb 35 sample, 1.5mm thick
Comb 10 sample MC, 1.5mm thick
Comb 14 sample MC, 1.5mm thick
Comb 16 sample MC, 1.5mm thick
Comb 18 sample MC, 1.5mm thick
Comb 28 sample MC, 1.5mm thick
Comb 30 sample MC, 1.5mm thick
Comb Prep 1, Marker 1, 2mm thick
Comb Prep 2, Marker 2, 2mm thick
Comb Prep 4, Marker 2, 2mm thick
Comb 10 sample, 2mm thick
Comb 12 sample, 2mm thick
Comb 20 sample, 2mm thick
Comb 35 sample, 2mm thick
Comb 10 sample MC, 2mm thick
Comb 14 sample MC, 2mm thick
Comb 16 sample MC, 2mm thick
Comb 18 sample MC, 2mm thick
Comb 28 sample MC, 2mm thick
Comb 30 sample MC, 2mm thick
Sample Volume for
a 5mm thick gel
743µl
338µl
182µl
68µl
61µl
32µl
15µl
44µl
44µl
41µl
17µl
17µl
19µl
990µl
450µl
243µl
90µl
81µl
43µl
20µl
59µl
59µl
54µl
23µl
23µl
25µl
MC = multichannel pipette compatible
multiSUB maxi
■ Now available with 20 x 25cm,
20 x 20cm, 20 x 15cm or
20 x 10cm gel trays
■ Run up to 550 samples
■ Low buffer volumes
■ Ideal for extended separations
Typical Applications
Primarily designed
for separating high
numbers of samples
from PCR or cloning
The multiSUB Maxi is primarily designed for resolution of high numbers of samples
such as from Cloning or PCR. The multiSUB Maxi allows ultra high-resolution
separations over extended runs. Tray sizes correspond to standard blotter sizes. It also
allows easy sample transfer onto a membrane for further analysis.
Casting dams allow gels to
be rapidly cast externally
while the MultiSub™ unit is
in use for gel running
Four gel tray sizes are available – 20 x 10cm, 20 x 15cm, 20 x 20cm and 20 x 25cm.
Multichannel pipette compatible combs up to 40 sample facilitate speed loading of up
to 440 samples per gel. 50 sample combs allow maximum sample capacity of 550
samples per gel.
Ordering Information
TECHNICAL SPECIFICATIONS
MSMAXI10 multiSUB Maxi, 20 x 10cm UV Tray, 2 x 20 sample, 1mm thick combs, casting dams, loading guides
GEL DIMENSIONS,
(W X L)
20 X 10CM
20 X 20CM
UNIT DIMENSIONS
(W X L X H)
39.5 X 23 X 9CM
MAX. SAMPLE
CAPACITY
20 X 10CM TRAY – 200 SAMPLES
20 X 20CM TRAY – 450 SAMPLES
20 X 25CM TRAY – 550 SAMPLES
BUFFER VOLUME
1200ML
MSMAXI15 multiSUB Maxi, 20 x 15cm UV Tray, 2 x 20 sample, 1mm thick combs, casting dams, loading guides
MSMAXI20 multiSUB Maxi, 20 x 20cm UV Tray, 2 x 20 sample, 1mm thick combs, casting dams, loading guides
MSMAXIDUO multiSUB Maxi, 20 x 10 & 20 x 20cm UV Tray, 2 x 20 sample, 1mm thick combs, casting dams, loading guides
MSMAXI25 multiSUB Maxi, 20 x 25cm UV Tray, 2 x 20 sample, 1mm thick combs, casting dams, loading guides
MS20-UV10 20 x 10cm UV Tray
MS20-UV15 20 x 15cm UV Tray
MS20-UV20 20 x 20cm UV Tray
MS20-UV25 20 x 25cm UV Tray
MS20-UVDAMCasting Dams
MS20-LG
MS20-WP
MS20-PE
MS20-NE
MS20-UVS
Adhesive Loading Guides
Viewing Platform
Positive Electrode
Negative Electrode
20cm UV Gel Scoop
MS15/20-FC multiSUB Choice/Maxi Flexi caster
Code
0.75mm
MS20-1-0.75
Description
MS20-2-0.75
MS20-4-0.75
MS20-10-0.75
MS20-16-0.75
MS20-20MC-0.75
MS20-25-0.75
MS20-30-0.75
MS20-36-0.75
MS20-40MC-0.75
MS20-50-0.75
Comb Prep 1, Marker 1, 0.75mm thick
Comb Prep 2, Marker 2, 0.75mm thick
Comb Prep 4, Marker 2, 0.75mm thick
Comb 10 sample, 0.75mm thick
Comb 16 sample, 0.75mm thick
Comb 20 sample MC, 0.75mm thick
Comb 25 sample, 0.75mm thick
Comb 30 sample, 0.75mm thick
Comb 36 sample, 0.75mm thick
Comb 40 sample MC, 0.75mm thick
Comb 50 sample, 0.75mm thick
MS20-2-1
MS20-4-1
MS20-10-1
MS20-16-1
MS20-20MC-1
MS20-25-1
MS20-30-1
MS20-36-1
MS20-40MC-1
MS20-50-1
Comb Prep 1, Marker 1, 1mm thick
Comb Prep 2, Marker 2, 1mm thick
Comb Prep 4, Marker 2, 1mm thick
Comb 10 sample, 1mm thick
Comb 16 sample, 1mm thick
Comb 20 sample MC, 1mm thick
Comb 25 sample, 1mm thick
Comb 30 sample, 1mm thick
Comb 36 sample, 1mm thick
Comb 40 sample MC, 1mm thick
Comb 50 sample, 1mm thick
1.0mm
MS20-1-1
MSMAXICP Cool-Pack and Platform
MSMAXIBSB Buffer Saver Blocks pk/2,
saves 450ml of buffer
MS20-x -yLG Combi Comb and
Loading Guide;
x = comb well no., y = comb thickness
Sample Volume for
a 5mm thick gel
506µl
236µl
115µl
54µl
30µl
20µl
16µl
13µl
11µl
8µl
8µl
675µl
315µl
153µl
72µl
41µl
27µl
21µl
17µl
14µl
11µl
10µl
combs
Code
1.5mm
MS20-1-1.5
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
Description
MS20-2-1.5
MS20-4-1.5
MS20-10-1.5
MS20-16-1.5
MS20-20MC-1.5
MS20-25-1.5
MS20-30-1.5
MS20-36-1.5
MS20-40MC-1.5
MS20-50-1.5
Comb Prep 1, Marker 1, 1.5mm thick
Comb Prep 2, Marker 2, 1.5mm thick
Comb Prep 4, Marker 2, 1.5mm thick
Comb 10 sample, 1.5mm thick
Comb 16 sample, 1.5mm thick
Comb 20 sample MC, 1.5mm thick
Comb 25 sample, 1.5mm thick
Comb 30 sample, 1.5mm thick
Comb 36 sample, 1.5mm thick
Comb 40 sample MC, 1.5mm thick
Comb 50 sample, 1.5mm thick
MS20-2-2
MS20-4-2
MS20-10-2
MS20-16-2
MS20-20MC-2
MS20-25-2
MS20-30-2
MS20-36-2
MS20-40MC-2
MS20-50-2
Comb Prep 1, Marker 1, 2mm thick
Comb Prep 2, Marker 2, 2mm thick
Comb Prep 4, Marker 2, 2mm thick
Comb 10 sample, 2mm thick
Comb 16 sample, 2mm thick
Comb 20 sample MC, 2mm thick
Comb 25 sample, 2mm thick
Comb 30 sample, 2mm thick
Comb 36 sample, 2mm thick
Comb 40 sample MC, 2mm thick
Comb 50 sample, 2mm thick
2.0mm
MS20-1-2
1, 2, 4, 10, 16, 20MC, 25, 30,
36, 40MC, 50
0.75, 1, 1.5, 2MM
Sample Volume for
a 5mm thick gel
1013µl
473µl
230µl
108µl
61µl
41µl
32µl
26µl
22µl
17µl
16µl
1350µl
630µl
306µl
144µl
81µl
54µl
42µl
34µl
29µl
23µl
21µl
MC = multichannel pipette compatible
9
multiSUB screen
■ Available with 26 x 16, 26 x 24 and 26
Typical Applications
x 32cm or all three gel trays
■ Run up to 672 samples
■ Low buffer volumes
■ Multichannel pipette compatible
combs for speed loading
Ideal for checking very
large numbers of
samples or extended
high resolution
separations
Designed for rapid screening of very large numbers of Clonal or PCR samples, the multiSUB
Screen horizontal gel unit has a 672 maximum sample capacity per gel. This allows loading
and analysis of exactly seven 96 well format micro titre plates.
The large gel run length of 32cm also allows resolution of samples over a long distance for
separation of complex sample bands such as in restriction fragment analysis.
for Power Supplies
and Product Selector
see pages 38-39
The unit is available with a full length tray or with other tray length options of 16 or 24cm so
that the user’s exact requirements can be matched. In addition to options for single length gel
trays, multiSUB Screen is available with all three gel tray lengths to provide the maximum in
flexibility, versatility and value.
Buffer recirculation ports are included as standard to allow enhanced resolution over extended
runs while loading guides enhance well visibility for easy sample loading.
all multiSUB Screen
combs are multichannel
pipette compatible
TECHNICAL SPECIFICATIONS
Ordering Information
GEL DIMENSIONS
(W X L)
26 X 32CM
26 X 24CM
26 X 16CM
UNIT DIMENSIONS
50 X 28 X 9CM (L X W X H)
MAX SAMPLE
CAPACITY
26 X 32CM TRAY – 672 SAMPLES
26 X 24CM TRAY – 504 SAMPLES
26 X 16CM TRAY – 336 SAMPLES
BUFFER VOLUME
1400ML
COMBS AVAILABLE
NO. OF SAMPLES
THICKNESSES
28MC, 56MC
0.75, 1, 1.5, 2MM
MSSCREEN32 multiSUB Screen, 26 x 32cm UV Tray, 6 x 28 sample combs, loading guides
MSSCREEN24 multiSUB Screen, 26 x 24cm UV Tray, 6 x 28 sample combs, loading guides
MSSCREEN16 multiSUB Screen, 26 x 16cm UV Tray, 6 x 28 sample combs, loading guides
MSSCREENTRIO multiSUB Screen, 26 x 16cm, 26 x 24cm, 26 x 32cm UV Trays, 6 x 28 sample combs, loading guides
MS26-UV32 26 x 32cm UV Tray
MS26-PE
Positive Electrode
MS26-x -yLG CombiComb and Loading
MS26-UV24 26 x 24cm UV Tray
MS26-NE
Negative Electrode
Guide; x = comb well no.,
MS26-UV16 26 x 16cm UV Tray
MS26-WP
Viewing Platform
y = comb thickness
MS26-LG
Adhesive Loading Guides
MSSCRNBSB Buffer Saver Blocks, pk/2
MSSCRNCP Cool-Pack and
MS26-UVS
26cm UV Gel Scoop
saves 625ml of buffer
Platform
MS26-FC
Flexicaster for gels up to 32cm. Casts 7, 10, 15, 16, 20, 24 and 32cm long gels
Code
Sample Volume for
combs
0.75mm
MS26-28MC-0.75
MS26-56MC-0.75
1.0mm
MS26-28MC-1
MS26-56MC-1
10
Description
a 5mm thick gel
Comb 28 sample MC, 0.75mm thick
Comb 56 sample MC, 0.75mm thick
Comb 28 sample MC, 1mm thick
Comb 56 sample MC, 1mm thick
25µl
10µl
34µl
14µl
Code
1.5mm
MS26-28MC-1.5
MS26-56MC-1.5
2.0mm
MS26-28MC-2
MS26-56MC-2
Description
a 5mm thick gel
Sample Volume for
Comb 28 sample MC, 1.5mm thick
Comb 56 sample MC, 1.5mm thick
Comb 28 sample MC, 2mm thick
Comb 56 sample MC, 2mm thick
51µl
20µl
68µl
27µl
MC = multichannel pipette compatible
miniRapide
■ A convenient self contained solution
for routine agarose gel
electrophoresis
■ Ultra compact
■ Low buffer volumes
■ Multichannel pipette compatible
combs for speed loading
The miniRapide is a completely self contained system designed for quick checks of samples. Gel
casting, running and analysis are all performed in the same ultra compact unit. Buffer and gel volumes
have been kept to a minimum and the parallel electrode arrangement allows ultra efficient current
transfer, enabling resolution to be completed within 30 minutes. The UV transparent base allows direct
viewing on a UV Transilluminator with no need for time consuming transfer and potential gel damage.
Dual comb slots allow the loading of up to 40 samples per gel while multichannel pipette compatible
combs further enhance the speed and convenience.
Ordering Information
FMMS10
miniRapide, 10 x 8cm, 2 x 8 sample combs 1.5mm and casting dams
FMMS-DAM miniRapide Casting dams, pk/2
RPW0.2
Replacement Platinum Wire 0.2mm – 50cm
Code
Sample Volume for
a 5mm thick gel
330µl
90µl
40µl
25µl
15µl
10µl
Description
1.0mm
FMMS-1-1
Comb 1 sample , 1 dye , 1mm thick
Comb 4 sample, 1mm thick
Comb 8 sample, 1mm thick
Comb 12 sample, 1mm thick
Comb 16 sample, 1mm thick
Comb 20 sample MC, 1mm thick
combs
FMMS-4-1
FMMS-8-1
FMMS-12-1
FMMS-16-1
FMMS-20MC-1
Code
1.5mm
FMMS-1-1.5
FMMS-4-1.5
FMMS-8-1.5
FMMS-12-1.5
FMMS-16-1.5
TECHNICAL SPECIFICATIONS
GEL DIMENSIONS,
(W X L)
10 X 8CM
UNIT DIMENSIONS
(W X L X H)
15 X 15 X 4CM
MAX. SAMPLE
CAPACITY
40 SAMPLES
BUFFER VOLUME
50ML
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
1, 4, 8, 12, 16, 20
1, 1.5MM
Description
Comb 1 sample , 1 dye , 1.5mm thick
Comb 4 sample, 1.5mm thick
Comb 8 sample, 1.5mm thick
Comb 12 sample, 1.5mm thick
Comb 16 sample, 1.5mm thick
FMMS-20MC-1.5Comb 20 sample MC, 1.5mm thick
batteryGel
Typical Applications
For routine, rapid
checking of samples
Sample Volume for
a 5mm thick gel
495µl
135µl
60µl
38µl
23µl
15µl
MC = multichannel pipette compatible
■ Low voltage makes the MSBGEL
■
The MSBGEL battery mini-gel is designed specifically
with safety and cost in mind: as no power supply is
necessary. Results are obtainable within 1.5 hours
if used with our completely safe educational
electrophoresis kit, which is free of ethidium bromide.
It includes non-toxic electrophoretic dyes, spotting
pipettes, agarose, buffer and classroom protocols.
■
■
■
ideal for use in schools and colleges
where safety is paramount
Integrated safety lid makes the gel
inaccessible during use
UV-transparent acrylic for direct
visualisation of the gel within the
tank
Small size minimises the buffer and
gel consumption
Cost-effective – no need for
expensive power supplies, or
transilluminators if supplied with
optional kit
TECHNICAL SPECIFICATIONS
Ordering Information
MSBGEL
MSBGEL-KIT
MSBGEL-CG
MSBGEL-BAT
MSBG-1-4
Battery operated horizontal gel 6 x 7.5cm, 2 x 8 sample combs, casting gates
Educational electrophoresis kit with 1x100ml TBE buffer, 1x 5g agarose, 4x electrophoretic
dyes, spotting pipette and classroom protocols
Casting gates Pk/2 for MSBGEL
PP3 batteries for MSBGEL Pk/2
Comb 4 sample, 1mm thick
MSBG-1-8
MSBG-1-12
MSBG-1-16
Comb 8 sample, 1mm thick
Comb 12 sample, 1mm thick
Comb 16 sample, 1mm thick
UNIT DIMENSIONS (W X L X H)
11 X 17 X 3.5CM
GEL DIMENSIONS (W X L)
6 X 7.5CM
MINIMUM BUFFER VOLUME
50ML
MAXIMUM SAMPLE CAPACITY
32
COMBS:
COMB THICKNESS
NUMBER OF SAMPLES
1MM
4, 8, 12 AND 16
11
multiSUB midi-96
■ Designed for loading of DNA
■
■
■
Typical Applications
■
samples from multi-well plates
Ideal for high throughput
electrophoresis
Average run-time is just 15 to 30
minutes
Direct microplate format for easy
lane identification
Multichannel pipette compatible
combs for speed loading
Ideal for analysis of up to 96
PCR-fragment length
polymorphisms loaded from
96-well microplates or
thermal cycler blocks
The multiSUB Midi 96 Gel System is ideal for
high throughput electrophoresis of PCR products
or samples containing a small number of DNA
bands.
Its 10x12cm (WxL) gel dimensions and 96-well
comb block format correspond to the standard
microplate configuration, with additional lanes
for markers. Two different types of comb are
available: one which has 8 wells and one
additional lane for DNA markers and one which
has 8 wells and 2 additional lanes for markers.
The offset layout of the wells allows a maximum
run length of 1.8cm per well, resulting in
improved separation.
multiSUB Midi 96 can accommodate samples
from a 96-well plate – samples can be loaded
directly using 8-channel pipettes. As with all
multiSUB units, leak-proof casting is simplified
using the supplied casting dams while their
ultra-compact size minimises buffer usage and
bench space requirements.
MSMIDI96 Stretch Systems are also available for
those users requiring an extended run length per
well of up to 3.6cm.
TECHNICAL SPECIFICATIONS
12
GEL DIMENsions,
(W X L)
MSMIDI96:
UNIT DIMENSIONS:
(W X D X H)
MSMIDI96:
BUFFER VOLUME:
(W X L)
MSMIDI96:
MAX. SAMPLE
CAPACITY
96 SAMPLES PLUS
1 OR 2 MARKER LANES
COMBS AVAILABLE:
NO. OF SAMPLES
THICKNESSES
8 + 1X MARKER, 8 + 2X MARKERS
1, 1.5MM
MSMIDI96ST:
MSMIDI96ST:
MSMIDI96ST:
10 X 12CM
10 X 24CM
22 X 12.5 X 9CM
46.5 X 12.5 X 8CM
300ML
700ML
After pouring gel, the 96
well comb is inserted and
the gel is allowed to set
Samples are loaded using a After removing dams,
multichannel pipette
running tray is transferred
to the gel chamber and the
lid positioned ready for
electrophoresis
Ordering Information
MSMIDI96
MSMIDI961.5
Multi Sub Midi96, UV tray, Comb block with 12 x 8 sample, 1mm thick combs, casting dams
Multi Sub Midi96, UV tray, Comb block with 12 x 8 sample, 1.5mm thick combs, casting dams
Combs have one marker lane
MSMIDI96/2M
Multi Sub Midi96, UV tray, Comb block with 12 x 8 sample, 1mm thick combs, casting dams
Combs have two marker lanes
MSMIDI96/1.5/2M Multi Sub Midi96, UV tray, Comb block with 12 x 8 sample, 1.5mm thick combs, casting dams
Combs have two marker lanes
MSMIDI96ST
Multi Sub Midi96 STRETCH, UV tray, Comb block with 12 x 8 sample, 1mm thick combs, casting dams
MSMIDI96ST1.5
Multi Sub Midi96 STRETCH, UV tray , Comb block with 12 x 8 sample, 1.5mm thick combs,
casting dams. Combs have one marker lane
MSMIDI96ST/2M Multi Sub Midi96 STRETCH, UV tray , Comb block with 12 x 8 sample, 1mm thick combs,
casting dams. Combs have two marker lanes
MSMIDI96ST/1.5/2M Multi Sub Midi96 STRETCH, UV tray , Comb block with 12 x 8 sample, 1.5mm thick combs,
casting dams. Combs have two marker lanes
MSMIDI96-8-1-CB MSMIDI 96 Comb 8 sample MC + 1 Marker, 1mm thick COMB BLOCK
MSMIDI96-8-1.5-CB MSMIDI 96 Comb 8 sample MC + 1 Marker, 1.5mm thick COMB BLOCK
MSMIDI96-8-1/2M-CB MSMIDI 96 Comb 8 sample MC + 2 Marker, 1mm thick COMB BLOCK
MSMIDI96-8-1.5/2M-CB MSMIDI 96 Comb 8 sample MC + 2 Marker, 1.5mm thick COMB BLOCK
MSMIDI96ST-8-1-CB MSMIDI 96 STRETCH Comb 8 sample MC + 1 Marker, 1mm thick COMB BLOCK
MSMIDI96ST-8-1.5-CB MSMIDI 96 STRETCH Comb 8 sample MC + 1 Marker, 1.5mm thick COMB BLOCK
MSMIDI96ST-8-1/2M-CB MSMIDI 96 STRETCH Comb 8 sample MC + 2 Marker, 1mm thick COMB BLOCK
MSMIDI96ST-8-1.5/2M-CB MSMIDI 96 STRETCH Comb 8 sample MC + 2 Marker, 1.5mm thick COMB BLOCK
MSMIDI96-8-1
MSMIDI 96 Comb 8 sample MC, 1mm thick. one marker lane.
MSMIDI96-8-1.5
MSMIDI 96 Comb 8 sample MC, 1.5mm thick. one marker lane.
MSMIDI96-8-1/2M MSMIDI 96 Comb 8 sample MC, 1mm thick. two marker lanes.
MSMIDI96-8-1.5/2M MSMIDI 96 Comb 8 sample MC, 1.5mm thick. two marker lanes.
MS10-UV96
Multi Sub Midi, 96 Well Tray
MS10-UV96ST
Multi Sub Midi STRETCH, 96 Well Tray
multiSUB-4
■ Separates a maximum 1200
■
■
■
■
samples in as little as 15
minutes in 4 stacked horizontal
gel trays
Multichannel-compatible
combs and gel plate
configurations compatible with
microplates and thermal cycler
blocks ensure rapid loading of
DNA minipreps and PCR
products by 8-channel pipette
Double-sided 1.5-mm-thick
combs allow more sample
volume to be loaded into each
well
Three gel tray options available
in 8x6, 8x12 and 8x18cm (WxL)
sizes for maximum flexibility
Small footprint area reduces
uptake of bench space within
the laboratory
External Caster for
multiSUB-4
Each multiSUB-4 is supplied with 4 gel trays and 8 combs as standard, while additional trays and
combs may be purchased as required. Two double-sided comb and three tray length formats are also
available.
An optional flexicaster, either supplied separately or as a package with the multiSUB-4, is also available
that allows up to four 8x6, 8x12 and 8x18cm multisUB-4 gel trays to be cast simultaneously outside
the tank.
Technical Specifications
GEL DIMENSIONS,
(W X L)
8 X 6CM, 8 X 12CM, 8 X 18CM
Ordering Information
UNIT DIMENSIONS
35 X 11 X 16CM (W X D X H)
CSL-MULTISUB4
MAX. SAMPLE
PER 18CM TRAY
WITH 1CM RUN LENGTH:
WITH 2CM RUN LENGTH:
WITH 3CM RUN LENGTH:
Multisub4, Multi-Level Gel Chamber, Includes 4x 18cm UV Trays, 8x 18/8 Sample 1.5mm
Combs (Tape UV Trays To Seal)
CSL-MULTISUB4EXCAS Multisub4, As Above But With External Caster For 4 Gels
MSUB4UV6
MSUB4UV12
MSUB4UV18
MSUB4EXCASTER
MSUB4-12/1-1
multiSUB4 tray 8 x 6cm
multiSUB4 tray 8 x 12cm
multiSUB4 tray 8 x 18cm
External Caster For Msub4 (4 Trays)
12/1 Sample 1mm Combs for multiSUB4
MSUB4-18/8-1
MSUB4-12/1-1.5
MSUB4-18/8-1.5
CSL-CAB
18/8 Sample 1mm Combs for multiSUB4
12/1 SAMPLE 1.5mm Combs for multiSUB4
18/8 SAMPLE 1.5mm Combs for multiSUB4
Electrophoresis cable (Black & Red)
Typical Applications
Ideal for rapid
checking of large
numbers of
samples from PCR
and cloning
The multiSUB-4 is a compact system capable of running a maximum 1200 samples simultaneously by
stacking up to 4 horizontal gels. This achieves high sample throughput while maintaining the time- and
space-saving advantages of a small, compact unit.
CAPACITY
BUFFER VOLUME
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
306
144
72
200, 400, 600 OR 800ML
(FOR 1, 2, 3 OR 4 GEL TRAYS RESP.)
1, 8, 12, 18 DUOCOMBS
1, 1.5MM
casting systems
Two horizontal flexicasters are now available for use with the multiSUB Mini and Midi and multiSUB
Midi and Maxi gel trays. Each flexicaster is entirely versatile and includes an adjustable barrier that
may be locked into position to ensure efficient leak free casting. No further casting accessories are
needed other than the gel tray, while adjustable levelling feet and a spirit bubble facilitate even
gel-pouring.
■ Adjustable barrier with ultra-
soft silicone gasket ensures
leak-proof casting
■ Mini flexicaster
accommodates 7x7, 7x10,
10x7 and 10x10cm gel trays
■ Maxi flexicaster
accommodates 15x7, 15x10
and 15x15 and 20x10, 20x15,
20x20 and 20x25cm gel trays
Ordering Information
MS7/10-FC
Multi Sub Mini/Midi Flexi caster
MS15/20-FC Multi Sub Choice/Maxi Flexi caster
13
accessories
gel levelling table
buffer saver blocks
The Gel Levelling Table provides a useful way of pouring gels
of uniform thickness. The table features a
large 32 x 26cm platform with large
thumb-wheel levelling feet at each
corner. A levelling bubble is supplied.
Buffer saver blocks
physically reduce the
volume in positive and
negative compartments of
a gel chamber and so
reduces buffer
requirements, saving cost.
Blocks are available for all
multiSUB Horizontal Gel
Units.
combi-comb/loading guides
■ Colour coded for
gel rulers
thickness
■ Comb and guide in one
piece for convenience
■ Adjustable height
These guides combine the
convenience of a regular comb
with the appropriate guide (same
teeth number and width) for
loading samples, simply flip over.
■ Sharp, clear, easily visible
markings
■ For use with ethidium
bromide gels
■ Ideal for gel presentation
high efficiency horizontal gel cooling
■ Effective cooling
■ Cools without external
chilling systems
■ Improves gel resolution
and reduces run times
Comprising a removable Gel Platform and CoolPack this
unique system will cool the buffer chamber of multiSUB
horizontal gel units without any external chilling. Simply place
the platform over the running tray and place a pre-chilled
CoolPack on top. This allows the CoolPack to sit above the gel
in buffer directly removing any heat generated.
Ordering Information
14
High Efficiency Horizontal Gel Cooling Systems
MSMINICP
Cool-Pack and Platform for MSMINI
MSMIDICP
Cool-Pack and Platform for MSMIDI
MSCHOICECP Cool-Pack and Platform for MSCHOICE
MSMAXICP
Cool-Pack and Platform for MSMAXI
MSSCREENCP Cool-Pack and Platform for MSSCREEN
Horizontal Buffer Saver Blocks
MSMINIBSB
Buffer Saver Blocks for MSMINI, pk/2 saves 100ml of buffer
MSMIDIBSB
Buffer Saver Blocks for MSMIDI, pk/2 saves 100ml of buffer
MSCHOICEBSB Buffer Saver Blocks for MSCHOICE, pk/2 saves 190ml of buffer
MSMAXIBSB Buffer Saver Blocks for MSMAXI, pk/2 saves 450ml of buffer
MSSCREENBSB Buffer Saver Blocks for MSSCREEN, pk/2 saves 625ml of buffer
Horizontal Systems Combi Comb / Loading Guides
(x = comb well number, y = comb thickness)
MS7-x -yLG
Combination Comb and Loading Guide for MSMINI
MS10-x -yLG Combination Comb and Loading Guide for MSMIDI
MS15-x -yLG Combination Comb and Loading Guide for MSCHOICE
MS20-x -yLG Combination Comb and Loading Guide for MSMAXI
MS26-x -yLG Combination Comb and Loading Guide for MSSCREEN
Gel Levelling Table
CSL-GLT
Gel Levelling Table
UV Fluorescent Ruler
CSL-RULER
UV Fluorescent Ruler
buffers, agarose, markers
buffers for nucleic acid electrophoresis
Available in powder sachets to maintain shelf life, Cleaver Scientific TBE is
available for nucleic acid gel electrophoresis techniques. Each buffer sachet,
which is available in packs of 10, may be reconstituted to make 1 litre of
working solution. Buffers may also be supplied in 1 litre and 5 litre volumes
as ready-made 50x TAE and 10x TBE solutions.
high grade agarose for nucleic
acid electrophoresis
AG agaroses are suitable for
routine analysis of nucleic
acids. They combine tensile
strength with low electroendosmotic effects to achieve
high resolving power for a
wide size range of nucleic acid
fragments.
GelX disposable gel excision tips
Widely acclaimed as a great new tool for gene cloning and now available
from Cleaver Scientific, GelX disposable gel excision tips offer a unique
and convenient way to excise bands from gels. GelX tips allow completely
safe and contamination free removal of the gel band of interest without
the need to handle potentially dangerous scalpels. The gel band is neatly
extracted and contained in the tip, when it is then dispensed into a tube
for further analysis. Once used, the tip is ejected for disposal.
■ Eliminates scalpel damage to transilluminator or
■
■
■
■
■
■
■
gel tray
Designed for removing bands from agarose and
protein gels
One handed operation
Push button gel and tip release mechanism
Fits standard 1000 µl pipettors
Autoclavable
DNase and RNase free
Sterile versions are also available
RNase-Free Water
DEPC-treated to eliminate enzyme activity and
then autoclaved, this sterile highly purified water
product is perfect for use in PCR and Northern
blotting techniques. Available either in a single
250ml bottle or as one hundred 5ml aliquots to
prevent cross-contamination.
ready-to-use DNA markers
Pre-made and containing bromophenol blue for immediate use,
Cleaver Scientific markers are specially formulated to run accurately
and produce sharp, well defined DNA ladders. Available in five
molecular weight ranges, each marker may be stored at room
temperature. DNA loading dye, containing 10x bromophenol blue, is
also available in 1ml volumes for easy sample loading and migration.
Ordering Information
High Grade Agarose for Nucleic Acid Electrophoresis
CSL-AG100
Agarose 100g (1 x 100g Bottles)
CSL-AG500
Agarose 500g (1 x 500g Bottles)
Buffers for Nucleic Acid Electrophoresis
CSL-TBEP
Powdered Tris-Borate-EDTA Running buffer - 10 Pouches (10 litres/pk)
TAE50X1L
Cleaver Buffer Tris-Acetate-EDTA Running Buffer 50X 1L
TAE50X5L
Cleaver Buffer Tris-Acetate-EDTA Running Buffer 50X 5L
RNase-Free Water
RFW250
RNase-Free Water 250 ml
Ready-to-Use DNA Markers
CSL-MDNA-100bp 100 bp DNA Ladder (can be stored at Room temperature)
CSL-MDNA-1kb
1 kb DNA Ladder (can be stored at room temperature)
CSL-MDNA-BR
Broad Range DNA Ladder, 250bp-8,000bp (can be stored at room temperature)
GelX disposable gel excision tips
CSL- gelX4
4mm x 1mm 250/ bag
CSL- gelX4RACK 4mm x 1mm 5 racks of 48
CSL-AG1000
CSL-AG2000
Agarose 1000g (2 x 500g Bottles)
Agarose 1000g (4 x 500g Bottles)
TBE10X1L
TBE10X5L
Cleaver Buffer Tris-Borate-EDTA Running Buffer 10X 1 litre
Cleaver Buffer Tris-Borate-EDTA Running Buffer 10X 5 litres
RFW50X5
RNase-Free Water 50x 5ml
CSL-MDNA-HR
CSL-MDNA-LR
CSL-LOADDYE
High Range DNA Ladder, 1000bp-10,000bp (can be stored at room temperature)
Low Range DNA Ladder, 125bp-3,000bp (can be stored at room temperature)
10x Bromophenol Blue Loading Dye, 1ml
CSL- gelX 6.5
6.5mm x 1mm 250/ bag
CSL- gelX6.5RACK 6.5mm x 1mm 5 racks of 48
15
package deals horizontals
Cleaver Scientific now offers a comprehensive range of Combination Packages to address any budget or horizontal electrophoresis application.
Mini Horizontal with Power Supply
Ordering Information
MSMINIDUO-MINI150
Mini Horizontal Electrophoresis Package, includes: • MSMINIDUO - horizontal unit with 7x7cm and 7x10cm gel trays and combs (Page 6)
• MINI150V - 150V, 600mA, 60W mini power supply (Page 39)
MSMINIDUO-MINI150KIT
Mini Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSMINIDUO-MINI150
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
Midi Horizontal with Power Supply
Ordering Information
MSMIDIDUO-MINI300
Midi Horizontal Electrophoresis Package, includes: • MSMIDIDUO - horizontal unit with 10x7cm and 10x10cm gel trays and combs (Page 7)
• MINI300V - 300V, 400mA, 60W mini power supply (Page 39)
MSMIDIDUO-MINI300KIT
Mini Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSMIDIDUO-MINI300
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
Choice Horizontal with Power Supply
Ordering Information
MSCHOICETRIO-CS300
Choice Horizontal Electrophoresis Package, includes: • MSCHOICETRIO - horizontal unit with 15x7cm, 15x10cm and 15x15cm gel trays and combs (Page 8)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
MSCHOICETRIO-CS300KIT Choice Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSCHOICETRIO-CS300
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
Maxi Horizontal with Power Supply
Ordering Information
MSMAXIDUO-CS300
Maxi Horizontal Electrophoresis Package: • MSMAXIDUO - horizontal unit with 20x10cm and 20x20cm gel trays and combs (Page 9)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
16
package deals horizontals
Combs and gel tray options may be changed at order.
Maxi Horizontal with Power Supply
Ordering Information
MSMAXIDUO-CS300KIT
Maxi Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSMAXIDUO-CS300
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
Screen Horizontal with Power Supply
Ordering Information
MSSCREENTRIO-CS500
Screen Horizontal Electrophoresis Package, includes: • MSSCREENTRIO - horizontal unit with 26x16cm, 26x24cm and 26x32cm gel trays and combs (Page 10)
• CS-500V - 500V, 800mA, 300W maxi power supply (Page 39)
MSSCREENTRIO-CS500KIT Screen Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSSCREENTRIO-CS500
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
Midi96 Horizontal with Power Supply
Ordering Information
MSMIDI96-CS300
Midi96 Horizontal Electrophoresis Package, includes: • MSMIDI96 - horizontal unit with UV tray and 12x8-sample 1mm comb block (Page 12)
• CS-300V - 300V, 700mA, 150W mini power supply (Page 39)
MSMIDI96-CS300KIT
Midi96 Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSMIDI96-CS300
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
MultiSUB-4 Horizontal with Power Supply
Ordering Information
MSUB4-CS300
MultiSUB-4 Horizontal Electrophoresis, includes: • MULTISUB-4 - horizontal unit with four 8x12cm gel trays and combs (Page 13)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
MSUB4-CS300KIT
MultiSUB-4 Horizontal Electrophoresis Package with electrophoresis starter kit, includes: • MSUB4-CS300
• CSL-LOADDYE – 10x Bromophenol Blue Loading Dye, 1ml (Page 15)
• CSL-MDNA-1kb – 1kb DNA ladder (Page 15)
• CSL-AG100 – 100g agarose (Page 15)
• CSL-TBEP – Powdered Tris-Borate-EDTA Running Buffer – 10 pouches (Page 15)
17
comet assay tanks
■ For Single Cell Gel Electrophoresis
■ Minimise exposure to light and reduce
background DNA damage
■ High efficiency cooling for enhanced
resolution
Cleaver Scientific COMET assay tanks are available in four slide formats to study single cell gel
electrophoresis (SCGE), a technique made popular by drug toxicology and carcinogenesis studies for the
detection and quantitation of DNA damage in cells. Each tank’s robust construction from ebony acrylic
ensures that cells remain free of exposure to background light and DNA damage during electrophoresis,
while a cooled central platform provides a convenient surface for slide preparation and control of slide
temperature during the assay. Following electrophoresis DNA damage may be measured using the
highly recommended Comet Assay IV Software from Perceptive Instruments.
F250 Chiller
With PID control ensuring temperature stability within ±0.5°C, the F250 is the perfect recirculating
chiller for active slide temperature control. This chiller also benefits from a maximum flow rate of 15
litres per minute and 0.35 bar pressure, while a small footprint and frontal vents allow multiple units to
be aligned side-by-side if required. A versatile working temperature range of +5°C to +40°C makes the
chiller suitable for use in other applications such as flat-bed isoelectric focusing.
The Comet Assay
Background: First introduced in 1981 to quantify double-stranded DNA breakages in single cells
exposed to γ-irradiation, the Comet Assay (or SCGE) has since been adapted to analyse specific DNA
lesions and repair processes.
Overview: Following genotoxic insult, such as ionizing radiation, the resultant strand breakage of
supercoiled duplex DNA reduces the size of the large genomic DNA from which these strands are
separated or drawn out by electrophoresis. The genomic DNA then takes on the appearance of a
‘comet’ as its negatively charged broken ends and fragments migrate towards the anode during
electrophoresis.
Method: After exposure to a genotoxic insult cells are suspended within low melting point agarose and
embedded within a thin layer of agarose on a microscope slide. Cellular protein is then removed by lysis
in detergent, when DNA is allowed to unwind in alkaline conditions before electrophoresis. The DNA is
electrophoresed, stained and then analysed using software such as Perceptive Instruments Comet
Assay IV.
Full Screen Shot of a Comet Profile within the Comet Assay
IV Software.
A. The Comet ‘Head’ comprising largely intact genomic DNA.
B. The Comet ‘Tail’ of mobile damaged or fragmented DNA.
Results: Microscopy imaging is used to measure DNA fluorescence upon staining. In DNA damaged
cells the resultant image resembles a ‘comet’ with the cellular DNA separated into a head and tail. The
head is mainly composed of intact genomic DNA, whereas any fragmented or damaged DNA is
concentrated within and towards the tail.
Cleaver Scientific recommends Comet Assay IV scoring software from Perceptive Instruments. Please
enquire by emailing sales@cleaverscientific.com.
Ordering Information
18
CSL-COM10
Comet Assay Tank for 10 Slides
CSL-CHILLER
CSL-COM20
Comet Assay Tank for 20 Slides
Comet Assay IV DNA damage and repair software scoring system
Chiller unit for active slide temperature control
CSL-COM40
Comet Assay Tank for 40 Slides
CSL-COM80
Comet Assay Tank for 80 Slides
(contact sales@cleaverscientific.com)
F250
Julabo Chiller
clinical electrophoresis
■ Compact High Resolution Systems for
Clinical Electrophoresis
■ Can accommodate cellulose acetate
strips up to 24 x 20cm
■ Complete range of cellulose acetate gels
and kits
■ Range includes Densitometer, Scanner
and Software
Cellulose acetate electrophoresis is an important technique in clinical diagnostics.
This new range of cellulose acetate products offers a complete system solution for
Research and Clinical Cellulose acetate electrophoresis procedures.
The Cellulose Acetate system is the ideal tank for both standard and wet
cellulose acetate electrophoresis. This unit is designed for both routine and
research requirements and is built to our high quality standard. The unit
includes an adjustable support which enables easy and fast adjustment for
different lengths of cellulose acetate strip.
To compliment this electrophoresis system, a range of cellulose acetate strips,
kits and accessories is available.
CELLULOSE ACETATE GELS – a new complete range of wet cellulose acetate gels
is available. These have the advantage that they can be used for a wide variety of
clinical electrophoresis applications including haemoglobin, serum proteins for
monoclonal gammapathies, urine proteins, isoenzymes, lipo and glycoproteins.
CellasGEL cellulose acetate gels are available in a variety of sizes and
applications:- 2.5 x 14cm, 2.5 x 17cm, 5.7 x 14cm, 5.7 x 17cm, 5 x 24cm,
17 x 17cm, 6 x 7.6cm Helena, 5.7 x 10.2 arched.
KITS are available for multiple tests on serum proteins, haemoglobin, urine
proteins and for immunofixation.
APPLICATORS – variety of rapid sample applicators are available for a selection
of applications:• Two specimen applicator for semi micro samples on strips 2.5cm wide.
• Four specimen applicator for semi micro samples on strips 5.7cm wide.
• Four specimen applicator for Haemoglobin samples on strips 5.7cm wide.
• Six specimen applicator for samples on strips 5.7cm wide.
BRIDGES are available in a variety of formats
for cellulose acetate sheets of dimensions and
for arched and horizontal Helena types of gels.
DENSITOMETER – to complete the range, a
universal densitometer scanner and software
able to read 144 tests per minute is offered.
Specimen applicator
Ordering Information
TECHNICAL SPECIFICATIONS
CSLCELLAS
Horizontal Unit for Cellulose Acetate Electrophoresis
STRIP DIMENSIONS
24 X 20CM (W X L) MAX.
CSLDENS
TurboScan Software Densitometer (computer and scanner not included)
UNIT DIMENSIONS
30 X 30CM
CSLSCAN
Flatbed Scanner for TurboScan software.
Code
CSLGEL2.514250
CSLGEL2.514200
CSLGEL2.517200
CSLGEL5.714250
CSLGEL5.714200
CSLGEL5.714250P
CSLGEL5.714200P
CSLGEL524190R
CSLGEL1717200
CSLGEL67.6H
CSLGEL5.710.2A
CSLKITCU
CSLKITI2432
CSLKITSP100200
CSLKITSP150200
Description
2.5x14 CellasGEL 250 micron, pack of 25
2.5x14 CellasGEL 200 micron, pack of 100
2.5x17 CellasGEL 200 micron, pack of 25
5.7x14 CellasGEL 250 micron, pack of 25
5.7x14 CellasGEL 200 micron, pack of 25
5.7x14 CellasGEL 250 micron Pratiga perforate, pack of 25
5.7x14 CellasGEL 200 micron Pratiga perforate, pack of 25
5x24 CellasGEL RS 190 micron Rectangular H.R., pack of 100
17x17 CellasGEL 200 micron, pack of 10
CellasGEL /Myl (Helena size) 6x7.6, pack of 10
CellasGEL /Myl for arched position electrophoresis 5.7x10.2, pack of 10
CellasKIT IFE Serum + Concentrated Urine (5+5 tests for 5 patients) on CellasGEL
CSLKITI2432 CellasKIT Immunofixation (24 semimicro or 32 micro tests) on CellasGEL
CellasKIT Serum Proteins (100 semimicro or 200 micro tests) on CellasGEL
CellasKIT High Resolution Of Serum Proteins (150 semimicro or 200 micro
tests) on CellasGEL
CellasKIT Hemoglobins (100 semimicro tests) on CellasGEL
kits
CSLKITHG100
Other products are available in this range, please enquire.
Typical Applications
Clinical Electrophoresis Tests:Haemoglobin, Serum Proteins
for Monoclonal Gammapathies,
Urine Proteins, Isoenzymes,
Lipo and Glycoproteins and
For Immunofixation
Code
CSLAPPS22
CSLAPPS4
CSLAPPM8
CSLAPPM8M
CSLAPPS18
SLAPPS18M
CSLKITIFE1
CSLKITSP480
CSLBDG8.5L
CSLBDG11L
CSLBDG8.5S
CSLBDG14RS
CSLBDG11S
CSLBDGA
CSLBDGH
CSL-CAB
Description
Applicator Semimicro 2+2 for CellasGEL 2.5x14 cm and Kit code CSLKITCU
Applicator Semimicro 4 for 1.2 _l/9mm – First type
Applicator Micro 8 for CellasGEL
Applicator Micro 8 for CellasGEL/Myl
Applicator Semimicro 18 for CellasGEL sheets 18.3 x14cm and 18.3 x17cm
Applicator Semimicro 18 for CellasGEL/Myl sheets 19.85 x 7.6 cm
CellasKIT IFE 1 Patient (10 semimicro tests) 10.2x12 cm for CellasClear
CellasKIT Serum Proteins (480 micro tests) on CellasClear
CSLBDG8.5L Bridge 8.5 cm for CellasGEL sheets 18.3x14cm
CSLBDG11L Bridge 11 cm for CellasGEL sheets 17x17cm
CSLBDG8.5S Bridge 8.5 cm (standard size for CellasGEL kits) for CellasGEL
strips 5.7x14 or 2.5x14cm
CSLBDG14RS Bridge 14 cm for CellasGEL RS Wedge 5x18.5 cm
CSLBDG11S Bridge 11 cm for CellasGEL strips 5.7x17 cm
CSLBDGA Bridge for in arched position electrophoresis
CSLBDGH Bridge for horizontal position electrophoresis Helena type
Electrophoresis cable (Black & Red)
19
omniPAGE....
■ Injection Moulded Mini Unit – durable, leak-proof
environment for complete safety and long life
■ Compatible with all major brands of precast gels
■ Rapid Gel Casting and Loading ensures trouble free
gel set-up
■ Versatile – interchangeable modules for slab gel and
2-D electrophoresis as well as electroblotting using a
single universal buffer tank
electroblotting
module
SIMPLE, RAPID, LEAK-PROOF GEL CASTING....
1
2
3
4
Insert glass plates
and slide gates to
create efficient seal
Transfer to casting
base and tighten
cams
Insert gel solution
and comb and
allow to polymerise
Transfer to tank, fill
with buffer and run
mini
PRESSURE CLAMPING FRAME
A unique single piece pressure frame offers the option
of rapid single screw per side or new screw free set up.
Even pressure and buffer contact across the plates
results in even sample migration and efficient heat
removal from the gel. Glass plates are 2mm thick to
reduce breakage.
RUN UP TO 4 GELS AT A TIME
While most vertical gel units can run only one or two
gels, the omniPAGE Mini units can run one, two or up
to four gels at any time using a triple glass plate
sandwich.
EXTENSIVE RANGE OF COMBS & SPACERS
• four thicknesses, colour coded
black: 0.75mm for ultra resolved bands
white: 1mm supplied as standard
red:
1.5mm for maximising
sample volume
blue: 2mm for maximising
sample volume
• options for Sample Prep
• options for MULTI-CHANNEL
PIPETTE COMPATIBLE
The number of samples can be maximised using
high tooth number combs
EFFECTIVE BUFFER COOLING
A simple to use cooling pack system ensures
enhanced resolution without costly and time
consuming additional equipment. No chiller, tap or
obstructing connecting leads are required. The cooling
pack is simply pre-chilled in a freezer and placed in
the gel tank. Additionally, the use of cooling packs
reduces buffer volume.
20
ELONGATED THUMB LOCATORS,
colour-coded to prevent polarity
reversal and facilitate 'easy-off'
lid removal.
SETTING A NEW STANDARD IN EVERTICAL ELECTROPHORESIS
Corrosion resistant,
99.99% pure
platinum electrodes
and gold plated
terminals - easily
replaced, ensuring
minimum repair
times
omniPAGE maxi,
20x20cm
omniPAGE
mini,
10x10cm
2-D module
casting base
2-D module
electroblotting
module
casting base
OMNI - om-ni- all, everything
The omniPAGE range of Vertical Gel Units combines ease of use with high
resolution separations. Three sizes, Mini 10 x 10cm, Mini Wide 20 x 10cm and
Maxi 20 x 20cm, share a host of common features including a guaranteed leak
proof seal required for trouble free, rapid and uncomplicated gel casting. Utilising
a built in gel running module eliminates time consuming transfer of glass plates
during casting, a process which can cause gel damage and misalignment. Glass
plates with permanently bonded spacers guarantee perfect spacer alignment. The
glass plate sandwich is then simply inserted between pressure bars and the new
zero screw slide clamps clicked into position. This ensures fast set up times while
even pressure bars and ultra soft seals guarantee leak proof casting. Once the gel
has polymerised, the gel running module is just inserted into the gel tank for
electrophoresis.
Injection
moulded
spacers
consistent with
comb thickness
for 'clean' well
formation
INTERCHANGEABLE MODULES
Increased capacity minivertical blotting module
allows simultaneous
transfer of 4 gels
All units are CE marked and are in conformity with the relevant CE Safety Directives:
73/23/EEC: LOW VOLTAGE DIRECTIVE: IEC 61010-1:2001. EN 61010-1:2001;
89/336/EEC EMC DIRECTIVE: EN55011 Emissions, EN50082-1 Immunity.
Retractable connectors
compatible with most
major power supplies
21
omniPAGE mini
■ Injection moulded construction
■ Compatible with all 8 x 10 and
10 x 10cm precast gels (WxH)
■ Rapid gel casting and loading
■ Low buffer volumes
■ Rapid set up cooling
Typical Applications
■ Run up to four gels
Mini SDS PAGE, Native
PAGE, Gradient, Second
dimension and Nucleic acid
separations
internal running module,
clamp version
Technical Specifications
PLATE DIMENSIONS,
GEL DIMENSIONS,
(W X L)
10 X 10CM
7.5 X 8CM
UNIT DIMENSIONS
19 X 13 X 15CM (W X D X H)
MAX. SAMPLE
CAPACITY
80 SAMPLES,
20 SAMPLES PER GEL
BUFFER VOLUME
MIN 250ML; MAX 1200ML
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
1, 5, 8MC, 9, 10, 12, 16MC, 20
0.75, 1, 1.5, 2MM
gel loading guides
omniPAGE Mini and optional accessories
The preferred unit for routine mini protein electrophoresis, the omniPAGE mini is constructed using the
latest injection moulding manufacturing techniques. This gives a high quality, low cost product with
unsurpassed finish, durability and strength.
The unit incorporates a sealing system which is compatible with all major types of 8 x 10cm and
10 x 10cm precast gel.
Gel casting and running utilise the same insert, no transfer of glass plates during gel casting is
necessary. The insert contains the option of sliding clamps or just one screw per clamping bar side
allowing very rapid set up of both hand cast and precast gels. Ultra soft silicone seals and pressure bars
which surround the glass plates guarantee leak proof gel casting. 2mm thick glass plates prevent
breakage and have bonded spacers for convenience.
Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.
Ordering Information
CVS10D
CVS10DSYS
CVS10PRE
CVS10DSYS-CU
omniPAGE Mini, 10 x 10cm Dual, 2 sets of Glass Plates, 1mm thick bonded Spacers, 2 x 12 sample, 1mm thick combs. CLAMP VERSION
omniPAGE Mini, 10 x 10cm Dual, 2 sets of Glass Plates, 1mm thick bonded Spacers, 2 x 12 sample, 1mm thick combs including caster. CLAMP VERSION
omniPAGE Mini, 10 x 10cm Dual. No accessories. CLAMP VERSION
omniPAGE Mini, 10 x 10cm Dual, 2 sets of Glass Plates, 1mm thick bonded Spacers, 2 x 12 sample, 1mm thick combs including caster. CLAMP VERSION, External casting upstand
CVS10EXCASTER
CVS10EXCASTERSYS
VS10DCAST
VS10DCASTM
CVS10DIRM
VS10ICB
VS10-X-LG
VS10NG
VS10PG
VS10NGS0.75
VS10PGS0.75
VS10NGS1
External Casting Stand - No Casting Base
External Casting System - Upstand+ Base
10 x 10cm Casting Base
Replacement Silicone Mat for 10 x 10cm Casting Base
Inner Running Module
Mini Cooling Pack
Loading Guides x = sample number
10 x 10cm Notched Glass Plates 2mm thick (pk/2)
10 x 10cm Plain Glass Plates 2mm thick (pk/2)
10 x 10cm Notched Glass Plates with 0.75mm Bonded Spacers (pk/2)
10 x 10cm Plain Glass Plates with 0.75mm Bonded Spacers (pk/2)
10 x 10cm Notched Glass Plates with 1mm Bonded Spacers (pk/2)
Code
0.75mm
VS10-1-0.75
Sample Volume
per well
VS10-5-0.75
VS10-8MC-0.75
VS10-9-0.75
VS10-10-0.75
VS10-12-0.75
VS10-16MC-0.75
VS10-20-0.75
Comb 1 Prep, 1 Marker, 0.75mm thick
Comb 5 sample, 0.75mm thick
Comb 8 sample MC, 0.75mm thick
Comb 9 sample, 0.75mm thick
Comb 10 sample, 0.75mm thick
Comb 12 sample, 0.75mm thick
Comb 16 sample MC, 0.75mm thick
Comb 20 sample, 0.75mm thick
500µl
70µl
40µl
35µl
30µl
25µl
20µl
15µl
VS10-5-1
VS10-8MC-1
VS10-9-1
VS10-10-1
VS10-12-1
VS10-16MC-1
VS10-20-1
Comb 1 Prep, 1 Marker, 1mm thick
Comb 5 sample, 1mm thick
Comb 8 sample MC, 1mm thick
Comb 9 sample, 1mm thick
Comb 10 sample, 1mm thick
Comb 12 sample, 1mm thick
Comb 16 sample MC, 1mm thick
Comb 20 sample, 1mm thick
650µl
100µl
60µl
50µl
40µl
35µl
25µl
20µl
1.0mm
VS10-1-1
22
Description
combs
VS10PGS1
VS10NGS1.5
VS10PGS1.5
VS10NGS2
VS10PGS2
VS10DP
VS10S0.75
VS10S1
VS10S1.5
VS10S2
RPW-0.2
Code
1.5mm
VS10-1-1.5
10 x 10cm Plain Glass Plates with 1mm Bonded Spacers (pk/2)
10 x 10cm Notched Glass Plates with 1.5mm Bonded Spacers (pk/2)
10 x 10cm Plain Glass Plates with 1.5mm Bonded Spacers (pk/2)
10 x 10cm Notched Glass Plates with 2mm Bonded Spacers (pk/2)
10 x 10cm Plain Glass Plates with 2mm Bonded Spacers (pk/2)
Dummy Plate, 10 x 10cm
10cm Spacers - 0.75mm (pk/2)
10cm Spacers - 1mm thick (pk/2)
10cm Spacers - 1.5mm thick (pk/2)
10cm Spacers - 2mm thick (pk/2)
Replacement Platinum Wire - 0.2mm, 50cm
Description
Sample Volume
per well
VS10-5-1.5
VS10-8MC-1.5
VS10-9-1.5
VS10-10-1.5
VS10-12-1.5
VS10-16MC-1.5
VS10-20-1.5
Comb 1 Prep, 1 Marker, 1.5mm thick
Comb 5 sample, 1.5mm thick
Comb 8 sample MC, 1.5mm thick
Comb 9 sample, 1.5mm thick
Comb 10 sample, 1.5mm thick
Comb 12 sample, 1.5mm thick
Comb 16 sample MC, 1.5mm thick
Comb 20 sample, 1.5mm thick
1000µl
140µl
80µl
70µl
30µl
50µl
40µl
30µl
VS10-5-2
VS10-8MC-2
VS10-9-2
VS10-10-2
VS10-12-2
VS10-16MC-2
VS10-20-2
Comb 1 Prep, 1 Marker, 2mm thick
Comb 5 sample, 2mm thick
Comb 8 sample MC, 2mm thick
Comb 9 sample, 2mm thick
Comb 10 sample, 2mm thick
Comb 12 sample, 2mm thick
Comb 16 sample MC, 2mm thick
Comb 20 sample, 2mm thick
1300µl
200µl
120µl
100µl
80µl
70µl
50µl
40µl
2.0mm
VS10-1-2
MC = multichannel pipette compatible
Combs, spacers and accessories also available in 0.5mm
omniPAGE mini wide
■ Offers the capacity of two mini gels on a single gel
■ Rapid gel casting and loading
■ Optional low or high buffer volumes
■ Rapid set up cooling
uses same combs as
VS20 systems
For combs,
see page 24
The omniPAGE mini wide vertical gel unit with a gel width of 20cm effectively allows double the number of
samples to be resolved as the omniPAGE mini unit. This allows consistency of sample comparison on a
single gel and is designed for those with greater than 20 samples to compare and resolve.
Typical Applications
Mini SDS PAGE, Native
PAGE, Gradient, Second
dimension and Nucleic
acid separations
Technical Specifications
Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting.
Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel
running. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume
without affecting run quality.
4mm thick glass plates reduce breakage and have bonded spacers for added convenience. A wide range
of accessories is available allowing many techniques to be performed using the same unit. Prep combs
can be used to maximise sample loading and recovery. Accessory electroblotting and tube gel modules are
available which use the same outer tank and lid.
PLATE DIMENSIONS,
GEL DIMENSIONS,
(W X L)
20 X 10CM
18 X 8CM
UNIT DIMENSIONS
26 X 16 X 16CM (W X D X H)
MAX. SAMPLE
CAPACITY
192 SAMPLES,
48 SAMPLES PER GEL
BUFFER VOLUME
MIN 600ML; MAX 2800ML
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
1, 5, 10, 18MC, 24, 30, 36MC, 48
0.75, 1, 1.5, 2MM
Ordering Information
VS10WD
omniPAGE Mini Wide, 20 x 10cm Dual, 2 sets of Glass Plates with 1mm thick bonded Spacers, 2 x 24 sample, 1mm thick combs, cooling pack
VS10WDSYS
omniPAGE Mini Wide, 20 x 10cm Dual, 2 sets of Glass Plates with 1mm thick bonded Spacers, 2 x 24 sample, 1mm thick combs, cooling pack including caster
VS10WDSYS-CU omniPAGE Mini Wide, 20 x 10cm Dual, 2 sets of Glass Plates, 1mm thick bonded Spacers, 2 x 24 sample, 1mm thick combs including caster, External casting upstand
VS10WEXCASTER VS10W External Casting Stand - No Casting Base
VS10WPGSO.75
VS20CAST
20 x 10cm Casting Base
VS10WNGS1
20 x 10cm Plain Glass Plates with 0.75mm Bonded Spacers (pk/2)
20 x 10cm Notched Glass Plates with 1mm Bonded Spacers (pk/2)
VS20DCASTM
Replacement Silicone Mat for 20 x 10cm Casting Base
VS10WPGS1
20 x 10cm Plain Glass Plates with 1mm Bonded Spacers (pk/2)
VS10WDIRM
Inner Running Module
VS10WPGS1.5
20 x 10cm Plain Glass Plates with 1.5mm Bonded Spacers (pk/2)
VS20-x -LG
Loading guides for omniPAGE mini combs, x = comb well number
VS10WPGS2
20 x 10cm Plain Glass Plates with 2mm Bonded Spacers (pk/2)
VS10WNG
20 x 10cm Notched Glass Plates 4mm thick (pk/2)
VS10WDP
Dummy Plate, 20 x 10cm
VS10WPG
20 x 10cm Plain Glass Plates 4mm thick (pk/2)
RPW-0.2
Replacement Platinum Wire - 0.2mm, 50cm
VS10WNGS0.75
20 x 10cm Notched Glass Plates with 0.75mm Bonded Spacers (pk/2)
VS20ICB
Maxi Cooling Pack
multiple minigel casting
gradient mixers
■ Integral levelling feet and level bubble
■ Standard and gradient gels can be poured
■ Choice of 6, 12 or 24 gel casting models
Advance casting of multiple mini gels can help to achieve consistent
results between runs. These multiple gel casting systems are tailored
for use with omniPAGE mini vertical electrophoresis units; with three
models of 6, 12 and 24 gel capacities. Fewer gels can be poured if
required using the acrylic saver blocks supplied with each system.
The fixed hinged clamps allows the gel sandwich to be adjusted to the
correct pressure irrespective of the number or the thickness of gels
being poured. Separation sheets allow the easy separation of the glass
plates after pouring.
Ordering Information
CSL-6CAST
6 gel caster for 8 x 10cm or 10 x 10cm gels
CSL-GM15 15ml Gradient Mixer
CSL-GM100 100ml Gradient Mixer
CSL-12CAST
12 gel caster for 8 x 10cm or 10 x 10cm gels
CSL-GM25 25ml Gradient Mixer
CSL-GM500 500ml Gradient Mixer
CSL-24CAST
24 gel caster for 8 x 10cm or 10 x 10cm gels
CSL-GM50 50ml Gradient Mixer
Ideal for Caesium, Sucrose and Gel gradients
these Gradient Mixers comprise two
chambers – a reservoir and a mixing
chamber with an
interconnecting
valve. A second
valve regulates the
output flow from the
mixing chamber. All
mixers have a flat
base which allows them to be placed on a
magnetic stirrer. A magnetic stirring bar
can be placed directly in the mixing
chamber to ensure a constant gradient.
The support rod allows the mixer to be
fixed to a retort stand for extra stability.
23
omniPAGE maxi
■ Ideal for high resolution separations
■ Rapid gel casting and loading
■ Optional low or high buffer volumes
Typical Applications
■ Rapid set up cooling
Maxi SDS PAGE, Native
PAGE, Gradient, Second
dimension and Nucleic acid
separations
Technical Specifications
PLATE DIMENSIONS,
GEL DIMENSIONS,
(W X L)
20 X 20CM
16 X 17.5CM
UNIT DIMENSIONS
26 X 16 X 28CM (W X D X H)
MAX. SAMPLE
CAPACITY
192 SAMPLES,
48 SAMPLES PER GEL
BUFFER VOLUME
MIN 1200ML; MAX 5600ML
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
1, 5, 10, 18MC, 24, 30, 36MC, 48
0.75, 1, 1.5, 2MM
The preferred unit for maxi protein electrophoresis, the omniPAGE maxi unit combines convenient ease
of use features with high resolution separations. Simple set up using ultra soft silicone seals guarantees
trouble free glass plate loading and gel casting.
Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel
running. Rapid set up cooling retains resolution in extended separations and also saves on buffer
volume without affecting run quality.
Glass plates reduce breakage and have bonded spacers for added convenience. A wide range of
accessories is available allowing many techniques to be performed using the same unit. Prep combs
can be used to maximize sample loading and recovery. Accessory electroblotting and tube gel modules
are available which use the same outer tank and lid.
Ordering Information
VS20D
omniPAGE Maxi, 20 x 20cm Dual with Glass Plates with bonded 1mm thick spacers, 2x 24 sample combs, cooling pack, dummy plate
VS20DSYS
omniPAGE Maxi, 20 x 20cm Dual with Glass Plates with bonded 1mm thick spacers, 2x 24 sample combs, cooling pack, dummy plate and Casting Base
VS20DSYS-CU
omniPAGE Maxi, 20 x 20cm Dual, 2 sets of Glass Plates, 1mm thick bonded Spacers, 2 x 24 sample, 1mm thick combs including caster, External casting upstand
VS20WEXCASTER
VS20DCAST
VS20DCASTM
VS20DIRM
VS20ICB
VS20-x -LG
VS20NG
VS20PG
VS20NGS0.75
VS20PGS0.75
VS20 External Casting Stand - No Casting Base
20 x 20cm Dual Casting Base
Replacement Silicone Mat for 20 x 20cm Casting Base
Inner Running Module
Maxi Cooling Pack
Loading guides for omniPAGE maxi combs, x = comb well number
20 x 20cm Notched Glass Plates 4mm thick (pk/2)
20 x 20cm Plain Glass Plates 4mm thick (pk/2)
20 x 20cm Notched Glass Plates with 0.75mm Bonded Spacers (pk/2)
20 x 20cm Plain Glass Plates with 0.75mm Bonded Spacers (pk/2)
Code
0.75mm
VS20-1-0.75
Sample Volume
per well
VS20-5-0.75
VS20-10-0.75
VS20-18MC-0.75
VS20-24-0.75
VS20-30-0.75
VS20-36MC-0.75
VS20-48-0.75
Comb 1 Prep, 1 Marker, 0.75mm thick
Comb 5 sample, 0.75mm thick
Comb 10 sample, 0.75mm thick
Comb 18 sample MC, 0.75mm thick
Comb 24 sample, 0.75mm thick
Comb 30 sample, 0.75mm thick
Comb 36 sample MC, 0.75mm thick
Comb 48 sample, 0.75mm thick
1100µl
160µl
80µl
40µl
30µl
25µl
20µl
15µl
VS20-5-1
VS20-10-1
VS20-18MC-1
VS20-24-1
VS20-30-1
VS20-36MC-1
VS20-48-1
Comb 1 Prep, 1 Marker, 1mm thick
Comb 5 sample, 1mm thick
Comb 10 sample, 1mm thick
Comb 18 sample MC, 1mm thick
Comb 24 sample, 1mm thick
Comb 30 sample, 1mm thick
Comb 36 sample MC, 1mm thick
Comb 48 sample, 1mm thick
1500µl
200µl
100µl
50µl
40µl
35µl
25µl
20µl
1.0mm
VS20-1-1
24
Description
combs
VS20NGS1
VS20PGS1
VS20PGS1.5
VS20PGS2
VS20DP
VS20S0.75
VS20S1
VS20S1.5
VS20S2
RPW-0.2100
Code
1.5mm
VS20-1-1.5
20 x 20cm Notched Glass Plates with 1mm Bonded Spacers (pk/2)
20 x 20cm Plain Glass Plates with 1mm Bonded Spacers (pk/2)
20 x 20cm Plain Glass Plates with 1.5mm Bonded Spacers (pk/2)
20 x 20cm Plain Glass Plates with 2mm Bonded Spacers (pk/2)
Dummy Plate, 20 x 20cm
20cm Spacers - 0.75mm (pk/2)
20cm Spacers - 1mm thick (pk/2)
20cm Spacers - 1.5mm thick (pk/2)
20cm Spacers - 2mm thick (pk/2)
Replacement Platinum Wire - 0.2mm, 100cm
Description
Sample Volume
per well
VS20-5-1.5
VS20-10-1.5
VS20-18MC-1.5
VS20-24-1.5
VS20-30-1.5
VS20-36MC-1.5
VS20-48-1.5
Comb 1 Prep, 1 Marker, 1.5mm thick
Comb 5 sample, 1.5mm thick
Comb 10 sample, 1.5mm thick
Comb 18 sample MC, 1.5mm thick
Comb 24 sample, 1.5mm thick
Comb 30 sample, 1.5mm thick
Comb 36 sample MC, 1.5mm thick
Comb 48 sample, 1.5mm thick
2200µl
320µl
160µl
80µl
60µl
50µl
40µl
30µl
VS20-5-2
VS20-10-2
VS20-18MC-2
VS20-24-2
VS20-30-2
VS20-36MC-2
VS20-48-2
Comb 1 Prep, 1 Marker, 2mm thick
Comb 5 sample, 2mm thick
Comb 10 sample, 2mm thick
Comb 18 sample MC, 2mm thick
Comb 24 sample, 2mm thick
Comb 30 sample, 2mm thick
Comb 36 sample MC, 2mm thick
Comb 48 sample, 2mm thick
3000µl
400µl
200µl
100µl
80µl
70µl
50µl
40µl
2.0mm
VS20-1-2
MC = multichannel pipette compatible
modular systems
■ Economy of bench space and
cost
■ Enhanced reproducibility
■ Simple to use casting
■ Rapid set up cooling
components and accessories of omniPAGE Mini, CVS10CES
MINI, MINI WIDE
AND
The omniPAGE range of Modular Vertical Gel
Systems allow multiple electrophoresis
techniques to be performed in the same unit.
Using the same main tank and lid, three
different inserts are interchangeable for slab
gel, tube gel and electroblotting techniques.
These systems are available in three size
options, Mini 10 x 10cm, Mini Wide 20 x 10cm
and Maxi 20 x 20cm and are available as
individual, combination or complete modular
systems. Combination and modular systems
offer maximum value and space and have the
added benefit of increased consistency which
results from using the same universal base
and lid.
MAXI COMPLETE MODULAR SYSTEMS
These systems include all modules and accessories required for Slab Gel Electrophoresis, 2-D
Electrophoresis and Electroblotting. The central component is the omniPAGE Mini Vertical unit, Mini Wide
Vertical Unit or omniPAGE Maxi Vertical unit. These include a rapid and intuitive casting system,
enhanced and easy to set up cooling system and have increased capacity – can run up to four gels per
run. In addition, the omniPAGE Tube gel module is capable of resolving up to 10 first dimension gels and
the Electroblotting module has a three blot capacity. The package includes all the necessary
accessories for Slab Gel, First Dimension and Electroblotting. Each of these techniques benefits from
rapid set up cooling packs which provide enhanced resolution even during high intensity 2-D
electrophoresis and Electroblotting.
modules included in
omniPAGE Mini, CVS10CES
Ordering Information
Technical Specifications
CVS10CES
UNIT DIMENSIONS
(W X D X H)
MINI 19 X 13 X 15CM
MINI WIDE 26 X 16 X 16CM
MAXI 26 X 16 X 28CM
MAX. SAMPLE, MINI
CAPACITY
SLAB 80 SAMPLES, 20 SAMPLES /GEL
TUBE - 10 TUBES; BLOT - 3 BLOTS
MAX. SAMPLE, MINI WIDE
CAPACITY
SLAB 192 SAMPLES, 48 SAMPLES /GEL
TUBE - 10 TUBES; BLOT - 3 BLOTS
MAX. SAMPLE, MAXI
CAPACITY
SLAB 192 SAMPLES, 48 SAMPLES /GEL
TUBE - 10 TUBES; BLOT - 3 BLOTS
BUFFER VOLUME
MINI: MIN 250ML; MAX 1200ML
MINI WIDE: MIN 600ML; MAX 2800ML
MAXI: MIN 1200ML; MAX 5600ML
Complete system for Mini Vertical Electrophoresis comprising:
1x omniPAGE Mini Vertical Unit which includes: 2x2mm thick notched glass plates, 2x2mm thick plain glass plates with
1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 12 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Capillary Electrophoresis Module which includes: internal running module for tube gels, capillary tubes,
blanking plugs, 2-D combs and spacers
plus: 1x Electroblotting Module comprising: internal electroblotting module, 3x compression cassettes for gel sizes
up to 10x10cm and 16x fibre pads.
VS10WCES
Complete Mini Wide (20x10cm) Vertical Electrophoresis Modular System, comprising:
1x omniPAGE Mini Wide Vertical Unit which includes: 2x4mm thick notched glass plates, 2x4mm thick plain glass plates with
1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick, 24 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Capillary Electrophoresis Module which includes: internal running module for tube gels, capillary tubes,
blanking plugs, 2-D combs and spacers
plus: 1x Electroblotting Module comprising: internal electroblotting module, 4x compression cassettes for gel sizes
up to 20x10cm and 12x fibre pads.
VS20CES
Complete system for Maxi Vertical Electrophoresis comprising:
1x omniPAGE Maxi Vertical Unit which includes: 2x4mm thick notched glass plates, 2x4mm thick plain glass plates with
1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 24 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Capillary Electrophoresis Module which includes: internal running module for tube gels, capillary tubes,
blanking plugs, 2-D combs and spacers.
plus: 1x Electroblotting Module comprising: internal electroblotting module, 3x compression cassettes for gel sizes
up to 20x20cm and 12x fibre pads.
modules included in
omniPAGE Maxi, VS20CES
25
omniPAGE 2D systems
MINI, MINI WIDE
MAXI COMPLETE 2-D SYSTEMS
AND
■ Rapid set-up electrofocusing
■ Extended accessory range
■ 10 tube capacity
■ Enhanced cooling features
The omniPAGE 2-D Systems include both modules required for Slab Gel and First Dimension Electrophoresis
and accessories, to provide a complete Mini, Mini Wide or Maxi 2-D system. The Tube Gel Module includes a
rapid release gasket for easy tube extraction.
Focusing can be accomplished in as little as
three hours in the Mini Unit. Disposable capillary
modules included in
tubes are included for added convenience, plus
omniPAGE Mini 2-D
System, CVS10C2DS
2-D combs and spacers which are colour coded
according to thickness for easy identification.
modules included in
omniPAGE Mini
Wide 2-D System,
VS10WC2DS
Ordering Information
CVS10C2DS Complete Mini 2-D System comprising:
1x omniPAGE Mini Vertical Unit which includes: 2x2mm thick notched glass plates, 2x2mm thick plain glass plates with 1mm
thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 12 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Capillary electrophoresis module which includes: internal running module for tube gels, capillary tubes,
blanking plugs, 2-D combs and spacers.
modules included in
omniPAGE Maxi 2-D
System, VS20C2DS
VS10WC2DS Complete Mini Wide 2-D System comprising:
1x omniPAGE Mini Wide Vertical Unit which includes: 2x4mm thick notched glass plates, 2x4mm thick plain glass plates with
1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 24 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Capillary electrophoresis module which includes: internal running module for tube gels, capillary tubes,
blanking plugs, 2-D combs and spacers.
VS20C2DS
Complete Maxi 2-D System comprising:
1x omniPAGE Maxi Vertical Unit which includes: 2x4mm thick notched glass plates, 2x4mm thick plain glass plates with 1mm
thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 24 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Capillary Electrophoresis Module which includes: internal running module for tube gels, capillary tubes,
blanking plugs, 2-D combs and spacers
TUBE GEL UNITS,
INSERTS AND ACCESSORIES
These stand-alone, complete units for first dimension capillary/tube gel electrophoresis,
Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include
omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units
are interchangeable with omniPAGE slab gel and electroblotting inserts.
Ordering Information
VS10DC
omniPAGE Mini Tube Gel Unit, 10x10cm with tank and lid, glass capillary tubes, blanking ports and cooling pack.
VS10DCI omniPAGE Mini Tube Gel Insert - includes glass tubes and blanking ports.
VS10WDC omniPAGE Mini Tube Wide Gel Unit, 20x10cm with tank and lid, glass capillary tubes, blanking ports and cooling pack
VS10WDCI omniPAGE Mini Tube Wide Gel Insert - includes glass tubes and blanking ports.
MCT10
Mini Capillary Tubes, pk/100
VS20DC
omniPAGE Maxi Tube Gel Unit, 20x20cm with tank and lid, glass capillary tubes, blanking ports and cooling pack
MCT101.5
Mini Capillary Tubes, 1.5mm, pk/100
VS20DCI omniPAGE Maxi Tube Gel Insert - includes glass tubes and blanking ports.
26
MCT20
Maxi Capillary Tubes, pk/100
MCBP
Mini and Maxi Capillary Blanking ports
MCT201.5
Maxi Capillary Tubes, 1.5mm, pk/100
isoelectric focusing system
■ For IPG strip and IEF gel applications
■ Large cooling platform area
■ Pick and place easy to position electrodes
■ Grid for accurate electrode alignment
■ Rehydration tray also available
The CSL-IEF system has been designed to perform all flat bed IEF
techniques, including wick-based electrophoresis with horizontal
and hand-cast IEF gels, and focusing with IPG strips. The unit
includes a large cooling platform which offers increased strip
capacity and active gel area. Uniform cooling of the platform is
achieved using a large ceramic plate that may be connected to
any standard chiller via quick-fit connecters for enhanced gel or
strip cooling. An optional rehydration tray is also available for
overnight rehydration of up to twelve IPG strips before use.
Low cost, high specification
Chiller available for use
with CSL IEF flatbed unit.
Ordering Information
CSL-IEF
Technical Specifications
Flatbed IEF system for IEF strips and gels
CSL-CHILLER Chiller for Electrophoresis systems
F250
CSL-IEFPOS Replacement positive electrode
CSL-IEFFRME Replacement electrode frame
CSL-IEFNEG Replacement negative electrode
CSL-RHYDTRY
CSL-IEFPLT
Rehydration Tray
Replacement Glass platform
Julabo Chiller
MAX STRIP LENGTH
26CM
MAX GEL DIMENSIONS
26 X 26CM
UNIT DIMENSIONS (W X D X H)
55 X 35 X 10CM
For 110 V AC version Chiller, please add ‘-$’ as a suffix to the appropriate code
second stage 2-D
■ Ideal for second dimension
electrophoresis
■ Accepts strips up to 26cm in
length
■ Rapid set up coolpacks for
enhanced resolution
The omniPAGE VS30 unit has been designed to provide a
convenient unit for the second stage of 2-D electrophoresis.
The 26cm active gel width provides a large gel area to resolve
large IEF strips. In combination with the IEF system above, this
offers a complete package for 2-D electrophoresis. The unit
utilises the omniPAGE advanced design features to provide
convenient ease of use with high resolution separations.
Technical Specifications
Rapid set up cooling retains resolution in extended separations
and also saves on buffer volume without affecting run quality.
Four gels can be resolved per run. A wide range of accessories
is available to allow easy transition between 2-D and standard
vertical electrophoresis techniques. In particular different types
of 2-D comb allow a wide degree of versatility in sample
selection and gel set-up.
UNIT DIMENSIONS
36 X 33 X 18CM (W X H X D)
PLATE DIMENSIONS
30 X 22CM (W X L)
GEL DIMENSIONS
28 X 20CM (W X L)
MAX SAMPLE
300 SAMPLES PER RUN; 75 SAMPLES PER GEL
BUFFER VOLUME
MIN 1800ML, MAX 8400ML
COMBS AVAILABLE
NO. OF TEETH
THICKNESSES
1, 2, 4, 28MC, 56MC, 75
0.25, 0.35, 0.5, 1, 1.5, 2.0MM
Ordering Information
VS30D
omniPAGE Maxi Plus, 30 x 22cm Dual with Glass Plates with bonded 1.5mm spacers, 2 x 28 sample combs, 2 x 2-D combs, cooling pack, dummy plate
VS30DSYS VS30D with Casting Base
VS30BI
omniPAGE VS30 Blot Maxi Insert - includes 3 cassettes and 6 fibre pads.
VS30DCAST 30 x 22cm Dual Casting Base
VS30DCASTM Replacement Silicone Mat for 30 x 22cm Casting Base
VS30DIRM Inner Running Module
VS30ICB
Maxi Cooling Pack
VS30-x -LG Loading guides for omniPAGE maxi combs, x = comb well number
VS30NG
30 x 22cm Notched Glass Plates 4mm thick (pk/2)
VS30PG
30 x 22cm Plain Glass Plates 4mm thick (pk/2)
VS30NGS0.75 30 x 22cm Notched Glass Plates with 0.75mm Bonded Spacers (pk/2)
VS30PGS0.75 30 x 22cm Plain Glass Plates with 0.75mm Bonded Spacers (pk/2)
Code
Description
Sample Volume
per well
2250µl
1125µl
550µl
80µl
40µl
25µl
combs
1.0mm
VS30-1-1
VS30-2-1
VS30-4-1
VS30-28MC-1
VS30-56MC-1
VS30-75-1
Comb 1 Prep, 1 Marker, 1mm thick
Comb 2 sample, 1mm thick
Comb 4 sample, 1mm thick
Comb 28 sample, 1mm thick MC compatible
Comb 56 sample, 1mm thick MC compatible
Comb 75 sample, 1mm thick MC compatible
Combs also available in other thicknesses and sample number, please enquire
VS30NGS1
VS30PGS1
VS30PGS1.5
VS30PGS2
VS30DP
VS30S0.75
VS30S1
VS30S1.5
VS30S2
RPW-0.2100
30 x 22cm Notched Glass Plates with 1mm Bonded Spacers (pk/2)
30 x 22cm Plain Glass Plates with 1mm Bonded Spacers (pk/2)
30 x 22cm Plain Glass Plates with 1.5mm Bonded Spacers (pk/2)
30 x 22cm Plain Glass Plates with 2mm Bonded Spacers (pk/2)
Dummy Plate, 30 x 22cm
22cm Spacers - 0.75mm (pk/2)
22cm Spacers - 1mm thick (pk/2)
22cm Spacers - 1.5mm thick (pk/2)
22cm Spacers - 2mm thick (pk/2)
Replacement Platinum Wire - 0.2mm, 100cm
Code
1.5mm
VS30-1-1.5
VS30-2-1.5
VS30-4-1.5
VS30-28MC-1.5
VS30-56MC-1.5
VS30-75-1.5
Description
Comb 1 Prep, 1 Marker, 1.5mm thick
Comb 2 sample, 1.5mm thick
Comb 4 sample, 1.5mm thick
Comb 28 sample, 1.5mm thick MC compatible
Comb 56 sample, 1.5mm thick MC compatible
Comb 75 sample, 1.5mm thick MC compatible
Sample Volume
per well
3375µl
1680µl
825µl
120µl
60µl
37µl
27
DGGE page with gradient mixer and caster
■ Maximum 96-sample
Typical Applications
throughput
■ Large format – 20 x 20cm
glass plates
■ Use with 100ml gradient mixer
to make two 1mm parallel
denaturing gradient gels
■ Compatible with microplates
and thermal cycler blocks
Detection of single base
changes and polymorphisms
in genomic cloned and
amplified DNA fragments
The omniPAGE-DGGE denaturing gradient gel electrophoresis unit can run two 20 x 20cm
polyacrylamide gels for the detection of single base changes and polymorphisms in cloned or amplified
DNA fragments. It is ideal for the study of mutations and DNA polymorphisms critical in disease. This
system is primarily for parallel denaturing gradient electrophoresis.
Technical Specifications
PLATE DIMENSIONS,
GEL DIMENSIONS,
(W X L)
20 X 20CM
16 X 17.5CM
UNIT DIMENSIONS
26 X 16 X 28CM (W X D X H)
MAX. SAMPLE
CAPACITY
192 SAMPLES,
48 SAMPLES PER GEL
BUFFER VOLUME
MIN 1200ML; MAX 5600ML
COMBS AVAILABLE :
NO. OF SAMPLES
THICKNESSES
1, 5, 10, 18MC, 24, 30, 36MC, 48
0.75, 1, 1.5, 2MM
The full range of "DGGE" analysis can be performed in this unit. During Denaturing Gradient Gel Electrophoresis, "DGGE", the buffer in the unit is heated using a 400-watt heater and the temperature controlled by
an external temperature control connected to an internal sensor. This allows the gel temperature to be set to
the melting temperature (Tm) of the amplified DNA polymorphism mutation of interest.
The temperature can be adjusted in 1°C increments up to a maximum temperature of 70°C, so the full
range of DGGE analysis can be performed in this unit. The unit contains all the features of the
successful omniPAGE series and uses the same user-friendly gel casting system. OmniPAGE-DGGE uses
all combs and accessories of omniPAGE Maxi, shown on page 24.
Ordering Information
VS20-DGGE
Denaturing Gradient Electrophoresis system, 20 x 20cm, including temperature controller, caster
and gradient mixer
VS20-DGGETC New DGGE Temperature Controller
peristaltic pumps
Available in single, dual and tetrad formats these versatile peristaltic pumps are an ideal accessory
for gradient gel formation with the VS20-DGGE. The ‘easy load’ head of the MU-D01 single peristaltic
pump accommodates multiple tubes of different diameters offering the user enhanced flexibility in
flow rate selection, while the MU-D02 single pump has the added benefit of a more powerful pump
motor. The MFU-01 and MFU-02 dual and tetrad pumps are equipped with microprocessor
technology for more accurate rpm control, and comprise
2 and 4 peristaltic pumps respectively that may be
controlled individually. All 4 pumps are reversible and
have a small footprint, occupying minimum space within
the laboratory. Other applications include: filtration,
sampling, chemical spraying, dispensing, transferring,
feeding and filling.
Technical Specifications
MU-D01 MU-D02 MFU-01 MFU-02
No. of Heads 1
1
2
4
Max. RPM: 300
600
100
100
Flow Rate, : 1.2-1140 0.3-2280 0.6-380 0.6-380
ml/min
Dimensions: 20x34x13 20x34x1326.5x34x18 26.5x34x18
(HxLxW)
Weight, kg:
5.7
5.7
5.7
5.7
28
Ordering Information
MU-D01
Single Peristaltic Pump
MFU-01
Dual Peristaltic Pump
MU-D02
Single Peristaltic Pump
MFU-02
Tetrad Peristaltic Pump
MU-S13
Silicon tube I.D. 1/32”, 25 ft
MU-S18
Silicon tube I.D. 3/8”, 25 ft
MU-S14
Silicon tube I.D. 1/16”, 25 ft
MU-S25
Silicon tube I.D. 3/16”, 25 ft
MU-S16
Silicon tube I.D. 1/8”, 25 ft
MU-S17
Silicon tube I.D. 1/4”, 25 ft
large format vertical
Ideal for a variety of large format vertical gel applications, these units offer advanced features for
enhancing gel resolution and ease of use, essential when handling gels of this size. Each unit contains
ultra soft silicone seals for easy plate sealing and trouble free runs, even over extended run times.
Resolution is enhanced by using an aluminium heat sink plate, essential for even sample migration.
Added convenience is provided by a removable lower buffer tank and upper buffer drainage tap.
Special buffer chambers allow either low buffer volumes to be used for economy or high buffer volumes
to be used for extended runs.
A wide range of interchangeable comb and spacer options allows a large number of techniques to be
easily accomplished including; DNA Sequencing, 2-D analysis, Micro-satellite analysis, DNA
fingerprinting, Gel shift assays, Single-Strand Conformation Polymorphism (SSCP), Heteroduplex and
Oligonucleotide analysis.
easily replaced
buffer seals
■ Run up to 96 samples
■ Enhanced gel heat homogenisation
■ Variable low or high buffer volumes
■ 20 x 50cm or 33 x 45cm formats
removable lower
buffer tray for
easy cleaning
PLATE RACKS
These sturdy racks are designed
for safe drying and storage of
glass plates. The small rack can
hold up to 20x 2mm thick plates
while the larger rack can
accommodate up to 10x 5mm
thick glass plates.
fan heater sensor kit
Ordering Information
Technical Specifications
CSQ20
Large Format Vertical, 20cm wide, glass plates, 0.35mm spacers, 48 sample comb
CSQ20-NG
Glass plates, pk/2 Notched
CSQ20-S0.35 Spacer set 0.35mm
CSQ20-PG
Glass plates, pk/2 Plain
CSQ20-S1
CSQ20-S0.25 Spacer set 0.25mm
Spacer set 1mm
CSQ20-S1.5 Spacer set 1.5mm
PLATE DIMENSIONS
(W X L)
CSQ20 20 X 50CM
CSQ33 33 X 45CM
MAX SAMPLE
CSQ20 48 SAMPLES
CSQ33 96 SAMPLES
CAPACITY
CSQ33
Large Format Vertical, 33cm wide, glass plates, 0.35mm spacers, 48 sample comb
BUFFER VOLUME
CSQ33-NG
CSQ33-PG
CSQ33-S0.25
CSL-FHS*
Glass plates, pk/2 Notched
Glass plates, pk/2 Plain
Spacer set 0.25mm
Fan heater sensor kit for large format
vertical units CSQ20 and CSQ33
COMBS AVAILABLE
NO. OF TEETH
THICKNESSES
Code
Typical Applications
DNA Sequencing, 2-D analysis,
Micro-satellite analysis, DNA
fingerprinting, Gel shift assays,
Single-Strand Conformation
Polymorphism (SSCP), Heteroduplex
and Oligonucleotide analysis
CSQ33-S0.35
CSQ33-S1
CSQ33-S1.5
CSL-MGR
CSL-LGR
Description
0.25mm
CSQ20-0.25-24 Comb 24 sample, 0.25mm thick, Sharks tooth
CSQ20-0.25-48 Comb 48 sample, 0.25mm thick, Sharks tooth
CSQ33-0.25-48 Comb 48 sample, 0.25mm thick, Sharks tooth
CSQ33-0.25-96 Comb 96 sample, 0.25mm thick, Sharks tooth
combs
0.35mm
CSQ20-0.35-24 Comb 24 sample, 0.35mm thick, Sharks tooth
CSQ20-0.35-48 Comb 48 sample, 0.35mm thick, Sharks tooth
CSQ33-0.35-48 Comb 48 sample, 0.35mm thick, Sharks tooth
CSQ33-0.35-96 Comb 96 sample, 0.35mm thick, Sharks tooth
Spacer set 0.35mm
Spacer set 1mm
Spacer set 1.5mm
Mini Glass Plate Rack for 20x 2mm Plates
Large Glass Plate Rack for 10x 5mm Plates
Sample Volume
per well
7µl
3µl
7µl
3µl
9µl
5µl
9µl
5µl
Code
1.0mm
CSQ20-1-24
CSQ20-1-48
CSQ33-1-48
CSQ33-1-80
1.5mm
CSQ20-1.5-24
CSQ20 MIN 500ML, MAX 1000ML
CSQ33 MIN 800ML, MAX 2000ML
24, 48, 80, 96
0.25, 0.35, 1, 1.5MM
Sample Volume
per well
Description
Comb 24 sample, 1mm thick, Square tooth
Comb 48 sample, 1mm thick, Square tooth
Comb 48 sample, 1mm thick, Square tooth
Comb 80 sample, 1mm thick, Square tooth
Comb 24 sample, 1.5mm thick, Square tooth
CSQ20-1.5-48 Comb 48 sample, 1.5mm thick, Square tooth
CSQ33-1.5-48 Comb 48 sample, 1.5mm thick, Square tooth
CSQ33-1.5-80 Comb 80 sample, 1.5mm thick, Square tooth
The list above includes the most popular combs for these units. Many more comb options are available, please enquire.
40µl
20µl
35µl
20µl
60µl
30µl
50µl
30µl
* For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
29
gel dryers
With a drying area of 21 x 31 cm, the Midi gel
dryer can dry six 10 x 10cm gels or a single
larger gel. The Maxi Gel Dryer with a 35 x 45cm
drying area can dry twelve 10 x 10cm mini gels
simultaneously. The unit’s microprocessor
controls temperature and time, each parameter
being displayed on its own LED display. The gels
are heated from the base plate while the vacuum
removes the moisture from below to dry the gel
homogeneously. These dryers feature optimal
sealing using a silicone rubber cover and
supporting mask. When applying the vacuum, a
groove that frames the drying surface provides
an optimal tight seal during drying.
■ Maxi dries up to twelve 10 x
10cm gels at a time
■ Microprocessor control
temperature and timer
■ Optimal tight seal during the
drying process
Technical Specifications
TEMPERATURE INCREMENT
0.1°C
TEMPERATURE CALIBRATION YES
TEMP UNIFORMITY
± 0.2°C
Ordering Information
TIMER 1-999 MINS
DRYING AREA
MIDI
MAXI
21 X 31CM
35 X 45CM
OPERATING TEMP. RANGE
AMBIENT TO 90°C
DIMENSION WXLXH
MIDI
MAXI
30 X 36 X 8CM
44 X 50 X 8CM
CSL-GDVH
Midi Gel Dryer 220V, 21 x 31 cm
CSL-GDVH35 Maxi Gel Dryer 220V, 35 x 45 cm
CSL-S2131
Replacement Silicon Rubber, Midi
CSL-S3545
Replacement Silicon Rubber, Maxi
CSL-M2131
Replacement Supporting Mask, Midi
CSL-M3545
Replacement Supporting Mask, Maxi
CSL-FLUSH
Replacement flushing fluid for Gelmaster
CSL-PUMP
Gelmaster Vacuum Pump
CSL-TRAP
Replacement Trapping fluid for Gelmaster
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
vacuum pumps
The Vacuubrand® MZ 2C + 2 AK is a quiet, low maintenance oil
free vacuum pump, which generates the lowest pressure
measurable reproducibly at room temperature for almost 100%
efficient solvent recovery. Two round bottomed flasks collect and
condense noxious gases released during gel drying, whereas inlet
and outlet separators act in tandem with the diaphragm pump to
facilitate controlled collection of vapours without risk of
condensate entering and contaminating the pump. The pump also
benefits from a compact design and construction from speciallyselected chemically resistant materials, long-life easy-to-change
diaphragms and valves, and gas ballast function.
Technical Specifications
MZ 2C + 2 AK
UNIT DIMENSIONS (W X L X H)
VACUUM PUMP
MZ 2C
NUMBER OF STAGES
PUMPING SPEED 50/60 HZ
ULTIMATE VACUUM (TOTAL)
ULTIMATE VACUUM WITH GAS BALLAST
INLET CONNECTION (IN)
OUTLET CONNECTION (EX)
WEIGHT
PUMP FLOW RATE
24.1 X 34.5 X 32.6CM
CHEMISTRY DIAPHRAGM PUMP
2
1.9M3/H / 2.1 M3/H // 1.2CFM
9 MBAR // 6.8 TORR
15 MBAR // 11 TORR
HOSE NOZZLE NW 10MM
HOSE NOZZLE NW 10MM
11.9KG
35 L/MIN
CSL-GD Pump
Cleaver Scientific’s new CSL-PUMP range is the
ideal cost-effective alternative to the Vacuubrand
gel pump. Each pump within the range is portable,
low-noise and environmentally friendly. Also
available is an optional vacuum regulator and filter
cartridge. All CSL-PUMP models are recommended
for use with the
optional CSLPUMPTRAP kit for
vapour collection,
and the vacuum
regulator with
filter cartridge
insert that
prevents pump
contamination.
30
Technical Specifications
CSL-PUMP300
Voltage Frequency
110-120V
60Hz
CSL-PUMP400
220-240V
50Hz
110-120V
60Hz
CSL-PUMP410
220-240V
50Hz
110-120V
60Hz
220-240V
50Hz
Max. Power (W)
70
60
90
95
90
95
Max. Flow Rate
25 L/min
22 L/min
38 L/min
34 L/min
28 L/min
25 L/min
Max. Vacuum
600mmHg = 79kPa
Max. Pressure
25PSI
Net Weight
Dimensions (LxWxH, mm)
25PSI
600mmHg = 79kPa
30PSI
30PSI
740mmHg = 97kPa
40PSI
40PSI
5.0kg
7.0kg
7.0kg
210x112x220
280x112x210
270x144x190
Ordering Information
CSL-GDPUMP
Geldryer Pump – 732502 MZ 2C NT +2AK
MU-VC-VR
Vacuum Regulator / Moisture Trap
CSL-PUMP300
CSL 300 chemically resistant vacuum pump
MU-VC-FC
Filter Cartridge
CSL-PUMP400
CSL 400 chemically resistant vacuum pump
CSL-PUMPTRAP 500ml glass bottle with 2 ports, plus S.S.
CSL-PUMP410
CSL 410 chemically resistant vacuum pump
connecting set and rubber tubing clamp
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
buffers, stains, markers
Fluorescent Protein Stains
Cleaver Scientific is pleased to launch 3 new fluorescent stains for protein detection that are both
reversible and more sensitive than many of the protein stains currently on the market. Available in blue,
green and red colours as CSLblue, CSLgreen and CSLred, these protein stains can detect a minimum
1-3ng of protein per square millimetre of gel. Staining and destaining times are comparable to those
required for standard Coomassie and SYPRO Ruby, while each gel may be visualised using a UV
transilluminator and visible light filter. Each stain’s metal chelate composition guarantees stability
without loss of sensitivity for at least 1 year if stored within the refrigerator.
Technical Specifications
Code
CSLblue
CSLgreen
CSLred
Blue colorimetric protein stain, 1L
Green fluorescent protein stain, 1L
Red fluorescent protein stain, 1L
312nm UV with white light filter
365nm UV with 530nm filter
312nm UV with 590nm filter
Sensitivity
3-5ng/mm2
1-3ng/mm2
1-3ng/mm2
Application
Protein gels
Protein gels and blots
Protein gels
Description
Documentation
Colorimetric Protein Stains
DyeHard is a new Coomassie Blue polymer stain whose sensitivity is comparable to silver stain. Its high
protein-binding affinity and specificity allows detection of as little as 3ng protein with minimal
background. Staining with DyeHard is faster and more convenient than standard Coomassie, since no
destain is required. DyeHard is also cost-effective, odourless and easy to dispose within the laboratory.
PAGE buffers
Five buffers are available in powder sachets for a range of native and denaturing protein gel
electrophoresis techniques. Each powder sachet, which is supplied as a 10-pack, may be reconstituted
to make 1 litre of working solution. Running buffers are also supplied in 1 litre and 5 litre volumes as
ready made 10x Tris-Glycine and 10x Tris-Glycine-SDS solutions.
Protein Markers
Stable for 2 years if kept at -20°C, Cleaver Scientific PINK Plus prestained protein ladder includes three
conspicuous blue reference bands, 10, 40 and 90 kDa in size, for easy identification. Ranging from 10
to 175 kDa, these markers are premixed with loading dye for direct loading on gels. Cleaver Scientific
BLUE Wide Range Protein Ladders are also available for the separation of proteins greater than 175kDa
in size. Sharp green and red reference bands, 25 and 75kDa in size, enable easy identification of protein
bands within the gel up to a maximum size of 245kDa. These markers are supplied in gel loading buffer,
ready for immediate use.
Ordering Information
Fluorescent Protein Stain
CSL-GREEN
Green Protein Stain, 1 litre
CSL-RED
Red Protein Stain, 1 litre
CSL-BLUE
Blue Protein Stain, 1 litre
DyeHard Protein Staining solution - 500ml
300-692-1000
DyeHard Protein Staining solution - 1000ml
CSL Pink Plus Prestained Protein Ladder (10-175 kDa)
CSL-BBL
Blue Wide Range Protein Ladder, (10-245 kDa)
Protein Staining Solution
300-692-500
Protein Markers
CSL-PPL
Powdered Buffers
CSL-TGSDSP
Powdered Tris-Glycine-SDS Running buffer - 10 Pouches (10 litres/pk)
CSL-MSDSP
Powdered MOPS-SDS buffer Running buffer - 10 Pouches (10 litres/pk)
CSL-TGP
Powdered Tris-Glycine Running buffer - 10 Pouches (10 litres/pk)
CSL-MESDSP
Powdered MES-SDS buffer Running buffer - 10 Pouches (10 litres/pk)
CSL-TTSDSP
Powdered Tris-TRICINE-SDS Running buffer - 10 Pouches (10 litres/pk)
Buffers for Protein Electrophoresis
TG10X1L Cleaver Buffer Tris-Glycine 10x 1 litre
TG-SDS10X1L Cleaver Buffer Tris-Glycine SDS 10x 1 litre
TG10X5L Cleaver Buffer Tris-Glycine 10x 5 litre
TG-SDS10X5L Cleaver Buffer Tris-Glycine SDS 10x 5 litre
31
4-gel vertical electrophoresis packages
Whether you require a package to match the market leader or one to address any budget or vertical electrophoresis
technique, Cleaver Scientific now offers the ultimate range of Combination Packages that will meet your needs.
Run 4 gels in the tank while casting another 4 externally
Ordering Information
CVS10TETRAD1
OmniPAGE TETRAD Mini-Protein Electrophoresis Package for 1mm self-cast gels , Includes: • CVS10DSYS-CU – 10x10cm mini-vertical unit with casting base and external casting stand, plus 2x
1mm 12-sample combs, 2x plain glass plates with 1mm spacer and 2x notched plates (Page 22 )
• VS10-12-1 – 2 additional 1mm 12-sample combs
• VS10PGS1 – 1 pack of 2x plain glass plates with 1mm spacer
• VS10NG - 1 pack of 2x notched glass plates
• VS10NGS1 - 2 packs of 2x notched glass plates with 1mm spacer
For 0.75, 1.5 and 2mm versions use CVS10TETRAD0.75, CVS10TETRAD1.5 and CVS10TETRAD2 respectively
With interchangeable 4-blot module
Ordering Information
CVS10TETRAD1CBS
OmniPAGE TETRAD with interchangeable 4-blot module, includes: • CVS10TETRAD1 - OmniPAGE TETRAD Mini-Protein Electrophoresis Package for 1mm self-cast gels
• VS10BI – 4-blot insert with 4 blotting cassettes and 8 fibre pads (Page 34)
For 0.75, 1.5 and 2mm versions use CVS10TETRAD0.75CBS, CVS10TETRAD1.5CBS and CVS10TETRAD2CBS respectively
With standard Midi power supply option
Ordering Information
CVS10TETRAD1-CS300 OmniPAGE TETRAD with standard Midi power supply option, includes: • CVS10TETRAD1 - OmniPAGE TETRAD Mini-Protein Electrophoresis Package for 1mm self-cast gels
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
For 0.75, 1.5 and 2mm versions use CVS10TETRAD0.75-CS300, CVS10TETRAD1.5-CS300 and CVS10TETRAD2-CS300 respectively
With standard Midi power supply option and
interchangeable 4-blot module
Ordering Information
CVS10TETRAD1CBS-CS300 OmniPAGE TETRAD with Midi power supply and interchangeable 4-blot module, includes: • CVS10TETRAD1CBS - OmniPAGE TETRAD Mini-Protein Electrophoresis Package for 1mm self-cast
gels with blotting module
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
For 0.75, 1.5 and 2mm versions use CVS10TETRAD0.75CBS-CS300, CVS10TETRAD1.5CBS-CS300 and CVS10TETRAD2CBS-CS300 respectively
With high current Maxi power supply option
Ordering Information
CVS10TETRAD1-CS3AMP OmniPAGE TETRAD with high current Maxi power supply option, includes: • CVS10TETRAD1 - OmniPAGE TETRAD Mini-Protein Electrophoresis Package for 1mm self-cast gels
• CS-3AMP - 300V, 3000mA, 300W maxi power supply (Page 39)
For 0.75, 1.5 and 2mm versions use CVS10TETRAD0.75-CS3AMP, CVS10TETRAD1.5-CS3AMP and CVS10TETRAD2-CS3AMP respectively
With high current Maxi power supply option
and interchangeable 4-blot module
Ordering Information
CVS10TETRAD1CBS-CS3AMP OmniPAGE TETRAD with Maxi power supply and interchangeable 4-blot module, includes: • CVS10TETRAD1CBS - OmniPAGE TETRAD Mini-Protein Electrophoresis Package for 1mm self-cast
gels with blotting module
• CS-3AMP - 300V, 3000mA, 300W maxi power supply (Page 39)
32
For 0.75, 1.5 and 2mm versions please to remember to use the correct number. E.g. - CVS10TETRAD0.75CBS-CS3AMP for a
0.75mm version
standard vertical package deals
*Other Combination Packages are available; please enquire.
Pre cast gel mini vertical package
Ordering Information
CVS10PRE-CS300
Pre-cast gel mini-vertical electrophoresis package
includes: -
• CVS10PRE - omniPAGE Mini-Protein system (Page 22)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
Self cast and pre cast mini vertical package
Ordering Information
CVS10DSYS-CS300
Pre-cast and hand cast gel mini-vertical electrophoresis package
includes: -
• CVS10DSYS - omniPAGE Mini-Protein system with casting base (Page 22)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
Mini vertical, power supply and blotting package
Ordering Information
CVS10CBS-CS300
includes: -
• CVS10CBS - omniPAGE Mini-Protein system with casting base and blotting insert (Page 34)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
For packages with high current power supply, use codes CVS10PRE-CS3AMP, CVS10DSYS-CS3AMP, CVS10CBS-CS3AMP; combs and
glass plates with bonded spacers may be changed at order
Wide mini vertical self cast package
Ordering Information
VS10WDSYS-CS300
Self-cast gel mini-wide vertical electrophoresis package
includes: -
• VS10WDSYS - omniPAGE Mini Wide Protein system with casting base (Page 23)
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
Wide mini vertical power supply and blotting package
Ordering Information
VS10WCBS-CS300
includes: -
• VS10WDSYS - omniPAGE Mini Wide Protein system with casting base and blotting insert
• CS-300V - 300V, 700mA, 150W midi power supply (Page 39)
For packages with high current power supply, use codes VS10WDSYS-CS3AMP, VS10WCBS-CS3AMP; combs and glass plates with
bonded spacers may be changed at order
Self cast maxi vertical and power supply package
Ordering Information
VS20DSYS-CS500
Self-cast gel maxi vertical electrophoresis package
includes: -
• VS20DSYS - omniPAGE Maxi Protein system with casting base (Page 34)
• CS-500V - 500V, 800mA, 300W maxi programmable power supply (Page 39)
Self cast maxi vertical, power supply
and blotting package
Ordering Information
VS20CBS-CS500
includes: -
• VS20CBS - omniPAGE Maxi Protein system with casting base and blotting insert (Page 34)
• CS-500V - 500V, 800mA, 300W maxi programmable power supply (Page 39)
For packages with high current power supply, use codes VS20DSYS-CS3AMP, VS20CBS-CS3AMP; combs and glass plates with
bonded spacers may be changed at order
33
omniPAGE electroblotting
MINI, MINI WIDE
MAXI COMPLETE ELECTROBLOTTING SYSTEMS
AND
■ Hinged cassettes
■ High intensity electrodes
■ Up to 4 blot capacity
■ Rapid set-up cooling
The omniPAGE Electroblotting Systems include both modules
required for Slab Gel Electrophoresis and Electroblotting and
accessories, to provide a complete Mini, Mini Wide or Maxi gel
casting, running and electroblotting system. The electroblotting module
includes 3 inter-locking cassettes and 12 fibre pads in the Mini Wide
and Maxi systems and 4 cassettes and 16 fibre pads for the Mini system.
A high intensity current is generated by coiled platinum
electrodes. These in conjunction with the advanced
cooling features allow rapid electroblotting in as
little as one hour.
Double hinged cassettes
for added convenience
modules included in
omniPAGE Mini
Electroblotting
System, CVS10CBS
Ordering Information
modules included in
omniPAGE Maxi
Electroblotting System,
VS20CBS
modules included in
omniPAGE Mini Wide
Electroblotting System,
VS10WCBS
CVS10CBS* Complete system for Mini Vertical (10 x 10cm) Electrophoresis & Blotting comprising:
1x omniPAGE Mini Vertical Unit which includes: 2x2mm thick notched glass plates, 2x2mm thick plain glass plates with 1mm
thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 12 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Electroblotting Module which includes: internal electroblotting module, 4x compression cassettes for gel
sizes up to 10x10cm and 16x fibre pads.
VS10WCBS Complete system for Mini Wide Vertical (20 x 10cm) Vertical Electrophoresis & Blotting comprising:
1x omniPAGE Mini Wide Vertical Unit which includes: 2x4mm thick notched glass plates, 2x4mm thick plain glass plates with
1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick, 24 samples), 1x casting base, silicone mat, cooling pack
plus: 1x Wide Electroblotting Module (20x10cm) which includes: internal electroblotting module, 3x compression
cassettes for gel sizes up to 20x10cm and 12x fibre pads.
VS20CBS
Complete system for Maxi Vertical (20 x 20cm) Electrophoresis & Blotting comprising:
1x omniPAGE Maxi Vertical Unit which includes: 2x4mm thick notched glass plates, 2x4mm thick plain glass plates with 1mm
thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 24 samples), 1x casting base, silicone mat, cooling pack.
plus: 1x Electroblotting Module comprising: internal electroblotting module, 3x compression cassettes for gel sizes up
to 20x20cm and 12x fibre pads.
* sliding clamps
BLOTTING UNITS,
INSERTS AND ACCESSORIES
These stand-alone, complete units for electroblotting, Mini, Mini
Wide and Maxi formats, include omniPAGE tank and lid,
electroblotting insert, cassettes and fibre pads. Units are
interchangeable with omniPAGE slab and tube gel inserts. Hinged
rigid cassettes allow rapid set up and
convenience and ensure even contact
between the gel and membrane is
maintained.
■
■
Ideal for Western
blotting of proteins
Open design, rigid
cassettes for maximum
current transfer
Ordering Information
SB10 omniPAGE Blot Mini, 10 x 10cm
System including tank and lid,
4 cassettes, 16 fibre pads, cooling pack
VS10BI omniPAGE Blot Mini Insert - includes
4 cassettes and 16 fibre pads
SB10C omniPAGE Blot Mini Cassette
SB10F Fibre pads - pk/8
34
SB10W omniPAGE Blot Mini Wide Unit, 20 x 10cm
System including tank and lid,
3 cassettes, 12 fibre pads, cooling pack
VS10WBIomniPAGE Blot Mini Wide Insert includes 3 cassettes and 12 fibre pads
SB10WC omniPAGE Blot Mini Wide Cassette
SB10WF Fibre pads - pk/6
SB20 omniPAGE Blot Maxi, 20 x 20cm
System including tank and lid, 3
cassettes, 12 fibre pads, cooling pack
VS20BI omniPAGE Blot Maxi Insert - includes
3 cassettes and 12 fibre pads
SB20C omniPAGE Blot Maxi Cassette
SB20F Fibre pads - pk/6
tank sub electroblotters
■
■
Ideal for wet electroblotting of
proteins - Western blotting
Up to five gel blot cassettes
utilised at any one time
■
■
Hinged cassettes for added
convenience
Accommodates gel thicknesses
from 0.25 up to 3mm
Designed primarily for wet electroblotting of proteins, TankSub Electroblotters offer a combination of
increased capacity with economy saving features. Both units, Mini 10 x 10cm and Maxi 20 x 20cm,
have increased capacity over standard systems with up to five gel blot cassettes utilised at any one
time. This is especially useful in high throughput laboratories.
A uniform electric field is provided by a high intensity coiled electrode and ensures uniform transfer
across the blot surface. The cassette’s open architecture ensures the maximum blot area allows direct
transfer of current. Its rigid construction ensures contact between the gel and membrane is retained
throughout the blot and an even pressure is maintained. These units are compatible with magnetic
stirrers to aid heat dispersal and prevent pH drifts in the buffer due to incomplete buffer mixing. Each
system includes a cooling pack to further enhance transfer efficiency by removing excess heat. This
also saves on buffer for added economy.
Double hinged
cassettes for added
convenience
Ordering Information
Technical Specifications
EBM10
UNIT DIMENSIONS
(W X D X H)
MINI
MAXI
19 X 13 X 19CM
24 X 16 X 26CM
MAX. SAMPLE,
CAPACITY
MINI
MAXI
5 BLOTS, 10 X 10CM
5 BLOTS, 20 X 20CM
20 BLOTS, 10 X 10CM
BUFFER VOLUME
MINI:
MAXI:
MIN 1000ML; MAX 1500ML
MIN 4300ML; MAX 6000ML
Electro Blot Mini, 10 x 10cm System for five cassettes, with tank and lid,
5x cassettes, 12x fibre pads and cooling pack
SB10C
Tank Blot Mini Cassette
EBM20
Electro Blot Maxi, 20 x 20cm System for five cassettes, with tank and lid,
SB10F
Fibre pads - pk/6
SB20C
Tank Blot Maxi Cassette
5x cassettes, 12x fibre pads and cooling pack
SB20F
Fibre pads - pk/6
semi dry blotters
These Semi Dry Blotters offer rapid transfer times for DNA, RNA and
protein blotting – typically 15 to 30 minutes. All units can be
used for all types of blotting: western, southern and northern
via uncomplicated buffer and set up procedures and are
compatible with gel thicknesses from 0.25 up to
10mm without the need for additional equipment.
Each unit is compatible with their respective
omniPAGE vertical gel system.
■
Semi Dry Blotting has the added benefit of
economic transfers due to very low buffer
volumes – typically only a few millilitres of buffer are
required per transfer. These Semi-Dry Blotters utilise a screw down
lid, which secures the blot sandwich and allows complete control
of pressure ensuring even transfer. The electrodes, comprising platinum
coated anode and stainless steel cathode, will exhibit practically no
corrosion and so provide many years of trouble free use.
■
Uniform heat dispersion across the blot sandwich ensures stable transfer
times and no heat induced sample loss or transfer distortions. Being
translucent, it allows viewing of the blot sandwich to ensure correct positioning and transfer is
occurring correctly. Electrode plates are fully separated to prevent arching or damage.
■
■
■
■
Rapid transfer times
Western, Southern and
Northern Blots
Economic Transfers due to very
low buffer volumes
Screw down lid – gels from 0.25
up to 10mm thick can be
blotted
Uniform heat dispersion
Long life electrodes
Technical Specifications
UNIT DIMENSIONS
(W X L X H)
MINI
MAXI
MAXI PLUS
MAXI LONG
16 X 16 X 7CM
26 X 26 X 7CM
33 X 45 X 7CM
26 X 56 X 7CM
MAX. SAMPLE,
CAPACITY
MINI
MAXI
MAXI PLUS
MAXI LONG
1 BLOT, 10 X 10CM
1 BLOT, 20 X 20CM
4 BLOTS, 10 X 10CM
1 BLOT, 35 X 45CM
1 BLOT, 20 X 50CM
MINI
MAXI
MAXI PLUS
MAXI LONG
5ML
20ML
75ML
50ML
BUFFER VOLUME
Ordering Information
SD10
Semi Dry Mini, 10 x 10cm System
SD20
Semi Dry Midi, 20 x 20cm System
SD33
Semi Dry Maxi Plus, 33 x 45cm System
SD50
Semi Dry Maxi Long, 20 x 50cm System
35
blotting
CAPILLARY BLOTTERS
■
■
■
Permanent wick with optimised
capillary action
Efficient transfer of high and low
M.Wt. fragments
Fast, easy set-up
■
■
DNA transfer in 2 hours or less;
RNA transfer in 3 hours or less
Floating lid ensures even
pressure without gel
compression
These Capillary Blotting systems offer a contained unit for southern and northern blotting. These units
incorporate optimised permanent wicks which eliminate the requirement for overlapping wicks, offering
greater consistency.
Technical Specifications
UNIT DIMENSIONS
W X D X H)
MINI
MAXI
30 X 30 X 10CM
42 X 30 X 10CM
The porous polyethylene platform draws up transfer buffer faster than traditional systems allowing for
faster transfer times.
Side by side transfer of multiple gels can be performed in a single set up.
Available in 15 x 26cm and 28 x 26cm formats.
floating lid
absorbent
towelling
• filter paper
• membrane
• gel stack
buffer
reservoir
permanent
wick
porous
support
Principle:
Through capillary action, the buffer travels
from the reservoir to the absorbent
towelling via the porous supports,
permanent wick, gel and membrane. This
action optimises the transfer of low and
high Molecular Weight DNA/RNA from gel
to membrane without mechanical damage
to even the thinnest of gels.
Ordering Information
CSL-CAPL
Capillary Blotting Unit (28cm x 26cm)
CSL-CAPS
Capillary Blotting Unit (15cm x 26cm)
DOT
■
■
■
■
■
AND
SLOT BLOTTERS
Low cost
Simple construction
Easy assembly
Four sample configurations
Alpha-numeric sample
identification
Four different sample number size and style of
Hybridisation Manifold are offered:- two types of
dot blotter and two types of slot blotter.
Model shown CSL-D48
Typical applications include clone screening with
DNA / RNA probes in Southern/Northern blots and
immunological screening with antibodies in
western blots.
The units incorporate precision lapped surfaces
to ensure uniform blotting membrane contact and
a leak proof gasket. These prevent lateral transfer
of samples – smudging – by ensuring that a
complete vacuum is formed. Six thumbscrews
ensure even and tight sealing for fast sample
suck down.
Dot blotters are available in 48 and 96 well
versions and slot blotters in 24 and 48 well.
36
36
CSL-D48
CSL-D96
CSL-S24
CONFIGURATION
MODEL
3 X 16
8 X 12
2 X 12
CSL-S48
3 X 16
SIZE OF WELL
12MM DEEP
6MM DIAMETER
12MM DEEP
6MM DIAMETER
12MM DEEP
6 X 0.5MM
12MM DEEP
6 X 0.5MM
VACUUM REQUIRED
----- 600MG HG 0.8 BAR WITH COLD TRAP -----
UNIT DIMENSIONS
60 X 95 X 100CM 60 X 105 X 140CM 60 X 74 X 83CM 60 X 95 X 100CM
MEMBRANES SIZE REQUIRED 12.1 X 4.4CM
11 X 7.4CM
12.1 X 4.4CM
12.1 X 4.4CM
Ordering Information
CSL-D48
48-well Dot Blot Manifold, 3 x 16 array
CSL-S24
24-well Slot Blot Manifold, 2 x 12 array
CSL-D96
96-well Dot Blot Manifold, 8 x 12 array
CSL-S48
48-well Slot Blot Manifold, 3 x 16 array
membranes, buffers, stains
Cleaver Scientific now offers a range of membranes, buffers and stains for protein and nucleic acid
blotting applications.
Available in powder sachet form, Towbin buffer Tris/Glycine base may be reconstituted to form 1 litre of
1x working solution for wet and semi-dry transfer techniques. Simply mix 800ml of 1x working solution
with 200ml methanol for complete 1x Towbin buffer.
Cleaver Scientific western transfer buffer is available as a 25x concentrate. Mix with 1200ml distilled
water to make 1x working solution.
Ordering Information
CSL-TTGP
Powdered Towbin Buffer, Tris-Glycine base - 10 pouches/pk (10 litres/pk)
CSL-WTB
Western 25x Transfer Buffer (50 ml)
Available as 1 litre ready to use solutions, Cleaver Scientific semi-dry blotting solutions facilitate
efficient transfer of proteins to nitrocellulose and PVDF membranes.
Ordering Information
CSL-SDWB
Semi-dry Western blot buffer (1000ml)
CSL-SDWBPVDF
Semi-dry Western blot buffer for PVDF (1000ml)
Ponceau S staining solution is reusable and available in a convenient 500ml volume for membrane
staining and early protein detection following transfer before western blotting. Ponceau S may also be
supplied in 10 powder sachets for long-term storage.
Ordering Information
CSL-PSS
Ponceau S staining solution (500ml)
CSL-PSB
Ponceau S staining solution powder – 10 pouches/pk (5 litres/pk)
Three different types of membrane are available for protein and nucleic acid transfer techniques.
Supplied either as 0.3x30m (WxL) roll or in precut sizes of 8x6cm and 8x8cm, these membranes are the
ideal size for the transfer of proteins and nucleic acids from polyacrylamide and agarose gels.
Ordering Information
CSL-PCMN88 10 x Pre-cut membranes, Nitrocellulose 8 x 8cm
CSL-PCMP88 10 x Pre-cut membranes, PVDF 8 x 8cm
CSL-PCMN86 10 x Pre-cut membranes, Nitrocellulose 8 x 6cm
CSL-PCMP86 10 x Pre-cut membranes, PVDF 8 x 6cm
CSL-PRMNY88
CSL-RNC45
10 x Pre-cut membranes, Nylon 8 x 8cm
CSL-RNC2
Nitrocellulose roll, pore size 0.20µm
CSL-PCMNY86
CSL-RNY45
Nylon roll, pore size 0.45µm
10 x Pre-cut membranes, Nylon 8 x 6cm
CSL-RNY2
Nylon roll, pore size 0.20µm
Nitrocellulose roll, pore size 0.45µm
Consort pH meters
Ideally suited to the measurement of electrophoresis buffer pH, Consort pH meters may also be used to
measure conductivity, total dissolved salt, salinity and temperature. Each meter may be supplied on its
own, with or without the electrode, calibration buffers and standards. All meters comprise a BNC
connection for connection to most electrodes commonly available on the market.
Ordering Information
C860
Meter only (without electrodes) + mains adaptor
C860P
Meter kit for pH: C860 + pH/ATC electrode SP10T + 2x50 ml buffers (pH 4 and 7) + 50 ml electrolyte (3M KCl)
C860T
Meter kit complete: C860 + pH electrode SP10B + epoxy conductivity electrode SK10B + ATC probe ST10N +
2x50 ml buffers (pH 4 and 7) + 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01M KCl)
SH300
Flexible electrode holder (optional)
C561
Meter only (without electrodes) + 4 NiMH batteries + mains adaptor
C561P
Meter kit for pH: C561 + pH/ATC electrode SP10T + 2x50 ml buffers (pH 4 and 7) + 50 ml electrolyte (3M KCl)
+ carrying case
C561T
Meter kit complete: C561 + pH electrode SP10B + conductivity electrode SK10B + ATC probe ST10N + 2x50 ml
buffers (pH 4 and 7) + 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01M KCl) + carrying case
A4049
Car adaptor, 12 V (optional)
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
37
Consort power supplies
■ Constant voltage, current or
All Consort Maxi Series (EV200) power
supplies have four output terminals for up to
four simultaneous runs. Powerful
microprocessor control allows complex
programming, while manual mode permits the
setting of voltage, current, power and time for
routine electrophoretic runs. The parameters
may also be changed temporarily without
interrupting the run.
power
■ Automatic crossover
■ Overload Protection
■ Short Circuit Protection
EV243
Mini
series
Programming – up to 9 different programs,
each with 9 steps, can be stored in the nonvolatile memory for future recall.
Timer – can be set to automatically terminate
the run and sound an alarm when the
allocated time or volt hours has elapsed.
Automatic cross-over – each model has constant
voltage, constant current and constant power
capabilities with automatic cross-over while
showing which parameter is kept constant.
Technical Specifications
0 - 99.59 HOURS
PROGRAMS
9 OF 9 SETS EACH
OUTPUTS
4 IN PARALLEL, 4MM SOCKETS
RESOLUTION
1V, 1MA, 1W
DIMENSIONS
31 X 26 X 15CM (W X L X H)
WEIGHT
10KG MAX.
maxi
TIMER
Technical Specifications
0 - 99.59 HOURS
PROGRAMS
EV222: 1 SET;
EV243: 9 OF 9 SETS
OUTPUTS
3 IN PARALLEL, 4MM SOCKETS
RESOLUTION
1V, 1MA, 1W
DIMENSIONS
24 X 20 X 13CM (W X L X H)
WEIGHT
3KG MAX.
mini
TIMER
Automatic recovery after mains failure – after
restoration of power, the instrument will
automatically continue the run for the remaining
time.
Data Transfer – optional data acquisition/control
software for PC is available to visualise and
examine the stored run details, store and program
the methods, add notes to the run, identify the unit,
copy or delete programs in the unit's memory.
Safety precautions – the AC line is automatically
disconnected from the high voltage transformer
when a ground leakage path is detected protecting
the user from potential shock. Other safety features
include protection against any overload including
accidental short circuit of the output and voltage
increases smoothly.
EV200 Maxi series
CONSORT MINI EV222
AND EV243
The Consort Mini EV222 and EV243 power
supplies are ideally suited for use with small
electrophoresis units. Both power supplies,
which occupy little space within the
laboratory, are portable and have several
other features:Manual Set-up – voltage, current and power
settings can be adjusted during the run.
Voltage ramp – this allows a linear voltage
gradient for any step to be programmed at
any step.
Automatic recovery after power failure.
3 output terminals.
The EV243 also benefits from 9 different
programs, each with 9 steps; data-logging
and data transfer to a PC, and PC remote
control.
Ordering Information
EV222
Consort Power Supply
200 V
200 mA
20 watts
EV261
Consort Power Supply
600 V
1000 mA
300 watts
EV243
Consort Power Supply
400 V
300 mA
50 watts
EV215
Consort Power Supply
1200 V
500 mA
300 watts
EV231
Consort Power Supply
300 V
1000 mA
150 watts
EV232
Consort Power Supply
3000 V
150 mA
150 watts
EV202
Consort Power Supply
300 V
2000 mA
300 watts
EV233
Consort Power Supply
3000 V
300 mA
300 watts
EV265
Consort Power Supply
600 V
500 mA
150 watts
EV262
Consort Power Supply
6000 V
150 mA
300 watts
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
Product
Selector
Application
38
HORIZONTAL
CSL Units
Power Supply
MINIRAPIDE, MULTISUB MINI, MULTISUB MIDI, MULTISUB CHOICE,
CS-250V; CS-300V; EV243
COMET ASSAY, MULTISUB MAXI, MULTISUB SCREEN, CELLULOSE ACETATE SYSTEM
VERTICAL AND MODULAR
BLOTTERS
LARGE FORMAT VERTICALS
OMNIPAGE MINI VERTICAL
CS-250V; CS-300V; EV243
OMNIPAGE MAXI AND VS30 VERTICAL AND MAXI AND VS30 MODULAR BLOTTERS
EV261; EV215
OMNIPAGE MINI AND MAXI 2-D AND COMPLETE MODULAR SYSTEMS
EV215
MINI TANKBLOT, MODULAR BLOT AND MINI SEMI DRY BLOT
CS-250V; CS-300V; EV202
MAXI TANKBLOT, MODULAR BLOT AND MAXI SEMI DRY BLOT
CS-3AMP; EV202; EV261
20CM AND 35CM WIDE LARGE FORMAT VERTICALS, IEF FLATBED SYSTEM
EV232; EV233; EV262
omniPAC power supplies
omniPAC
MAXIeasy to
■ High performance,
omniPAC MAXI Programmable Power Supplies are
high performance, easy to operate instruments, which
can handle virtually any application from medium
voltage electrophoresis to high current blotting.
Offering both graphic and text displays, omniPAC
MAXis are completely programmable with self
prompting menus and multiple operation modes.
Versatile: two models are available offering maximum
output capability up to 500V and from 400mA to 3A
and 300 watts. These units are suitable for running
multiple SDS gels, blotting and large submarine gels.
Fully Programmable: system parameter entry is via
the membrane keypad and the start key. They can be
programmed to recall and run constant or multi-step
electrophoresis in a variety of operational modes :
1. Constant operation with timer – program constant
voltage, current or wattage with timer to eliminate
the possibility of over running samples in gels.
2. Memory mode – Store 30 files to recall and re-run
favourite multi step programmes.
■
■
■
■
Display: omniPAC MAXI power supplies have large dot
matrix display screens allowing both graphic and text
visualisation.
Set parameters will be displayed continuously
compared with actual run conditions. This can be
viewed by touching ‘select display’ key.
Safety: omniPAC MAXI models meet all relevant safety
standards to protect both the operator and the
instrument. The alarm will sound in event of ground
leakage, no load or overload.
■
operate
Graphic and text displays
Completely programmable
Programme constant voltage
and current
Memory mode – Stores 16
files to recall and re-run
Safety – Comply to all relevant
safety standards
Technical Specifications
MAXI
CS-500V
CS-3AMP
MAX. VOLTAGE
MAX. CURRENT
MAX. WATT
500V
800MA
300W
300V
3A
300W
OUTPUT TYPE
PROGRAM STORAGE
PROGRAM MULTI-STEP
omniPAC
MIDI
• R
UN IN CONSTANT VOLTAGE AND CURRENT
• ALARM CAN BE SET AT THE
• AUTO CUT-OFF FUNCTION
• CURRENT UP TO 700MA
Midi CS-250V and CS-300V
DISPLAY
-- 28 X 64 DOT MATRIX DISPLAY SCREEN --
SAFETY
NO LOAD ; LEAKAGE AND
---- OVERLOAD DETECTION ----
DIMENSIONS
PLUG AND SOCKET;
NO LOAD DETECTION
• CONSTANT VOLTAGE
• LOW COST AND ECONOMICAL
omniPAC MINI power supplies have been
developed specifically for horizontal gel
electrophoresis systems. These ultra compact
power units with dual outlets, are recognised as
amongst the most compact and inexpensive power
supplies currently available and are designed and
constructed to the most rigorous safety standards.
Mini150V and Mini300V
110 / 220V
Technical Specifications
MIDI
CS-250V
CS-300V
MAX. VOLTAGE
MAX. CURRENT
MAX. WATT
250V
700MA
150W
300V
700MA
150W
OUTPUT TYPE
CONSTANT VOLTAGE OR CURRENT
1-999 MINS
1-999 MINS
19 (W) X 30.5 (L) X 9.5 (H) CM
OPERATION VOLTAGES
IZE
• SAFETY DESIGN : SHROUDED
19 (W) X 30.5 (L) X 9.5 (H) CM
OPERATION VOLTAGES
DIMENSION
OMPACT
---- UP TO 6 STEPS ------- 1-999 MINS IN PROGRAMMABLE MODE; ------- 1-9999 MINS CONSTANT MODE ----
TIMER
omniPAC
MINI
• C
S
---- 30 PROGRAMMED FILES ----
TIMER
END OF PROGRAM
These inexpensive, compact omniPAC MIDi power
supplies are ideal for routine horizontal and mini
vertical electrophoresis. Microprocessor control allows
setting in constant voltage and constant current. Four
gel chambers can be connected at any one time. An
optional timer can be set to end the run and sound an
alarm. Safety features include shrouded plugs and
sockets, no load detection and ground leakage
detection.
CONSTANT VOLTAGES ;
CONSTANT CURRENT ; OR CONSTANT WATT
110 / 220V
Technical Specifications
MINI
MINI150V
MINI300V
MAX. VOLTAGE
MAX. CURRENT
MAX. WATT
150V
600MA
60W
300V
400MA
60W
OUTPUT TYPE
25; 50; 75; 100
125 & 150V
50; 100; 150
200; 250 & 300V
SAFETY
---- NO LOAD DETECTION ----
DIMENSION
11.5 (W) X 15 (L) X 8 (H) CM
OPERATION VOLTAGE
110 / 220V
Ordering Information
Mini150V
omniPAC Power Supply
150V
600mA
60W
CSL-CAB
Replacement Cables, pk/2
Mini300V
omniPAC Power Supply
300V
400mA
60W
CSL-CAB2
Replacement CSQ unit cables, pk/2
CS-250V
omniPAC Power Supply
250V
700mA
150W
CSL-4-4
Power supply adapters, 4mm to 4mm
CS-300V
omniPAC Power Supply
300V
700mA
150W
CSL-4-2
Power supply adapters, 4mm to 2mm
CS-500V
omniPAC Power Supply
500V
800mA
300W
CSL-2-4
Power supply adapters, 2mm to 4mm
CS-3AMP
omniPAC Power Supply
300V
3000mA
300W
39
gel documentation
Technical Specifications
Type
Effective Pixels
CCD
Maximum Aperture
Shutter Speed
Filters
5x optical / 4x digital zoom camera14.7 megapixels
1/1.7” high-density CCD
f/2.8 (W) ~ f/4.5 (T)
15 ~ 1/4000s
+3 Close up and EtBr;
optional SYBR green
Storage Media
Computer Interface
Video Out
2MB memory card
USB 2.0 Hi Speed (mini-B jack)
NTSC/PAL
Darkroom:
Multi-power Source
Capture
Inner White Light
Safety Device
Weight & Dimensions
Voltage Rating
MicroDoc
■ 14.7 Megapixel digital CCD camera
■ Image visualised within a large 8” TFT
Camera:
For camera, inner white LED,
Manual-save in BMP format
2x3W LED
Safety door switch
6.1kg; 290x220x320mm
110~220V
■
■
■
■
■
Screen:
Type
Resolution
Brightness
Constant Ratio
Display Mode
8” TFT
600x800 Pixels
350 cd/mm2
300 : 1
NTSC / PAL / SECAM mode
auto switching
colour monitor
Light weight compact hood with easy
access door and built-in inner lights
Safety switches disconnect the UV
source when the easy access door is
opened
Computer-free operation
Available on its own with camera
and darkroom, or as a complete gel
documentation system with
transilluminator, either with or
without software
Transilluminators supplied in single
and dual wavelength formats – see
page 42
Recently upgraded with a new 14.7 megapixel digital CCD
camera to guarantee superb resolution, the microDOC is
the researcher’s choice for a simple ultra-compact gel documentation system that meets constraints in
both budget and space within the laboratory. A large 8” TFT screen enables images, including agarose
and fluorescent gels, colorimetric gels, autoradiography film and blotting membrane, to be captured in
colour, clearly and easily. The system is computer-free and supplied with a 2MB storage card and
58mm ethidium bromide filter as standard, while an optional SYBR filter is also available. Files are
saved onto the 2MB storage card in RAW, TIFF-RGB and JPEG formats and may be transferred to
computer for analysis with the highly recommended TotalLab™ 1D software.
Printer
The Mitsubishi P93 is a high speed, high resolution thermal printer that is perfectly suited to printing
images directly from the microDOC. Connected to the microDOC by a BNC cable, the Mitsubishi P93
prints 325dpi images, up to 133 x 99mm in size. Thermal printer paper is also available.
microDOC BASIC
The microDOC BASIC is a simple low-cost system comprising a lift-off dark room hood and 14.7
megapixel digital camera, through which the gel is viewed directly. This system can be supplied with
optional TotalLab 1D Analysis Software and any one of the 21x21cm transilluminators listed on page 42.
TotalLab™ 1D software
TotalLab™ 1D software is supplied only as part of a complete package with each of the microDOC and
transilluminator options. Its main functions include: lane creation, background subtraction, band
detection, profile deconvolution, and molecular size, pI and quantity calibration. More sophisticated
TotalLab™ Quant and Phoretix standalone software options are available for 1D applications that
require band matching, array, colony counting and image ToolBox functionalities.
Ordering Information
Gel Documentation Systems
System only
Including TotalLab 1D Analysis Software
Compact Gel documentation system
CSL-MICRODOC
CSL-MICRODOC1D
microDOC System with UV Transilluminator (UVT312)
CSL-MDOCUV312
CSL-MDOCUV3121D
microDOC System with UV Transilluminator (UVT254)
CSL-MDOCUV254
CSL-MDOCUV2541D
microDOC System with UV Transilluminator (UVT365)
CSL-MDOCUV365
CSL-MDOCUV3651D
microDOC System with UV Transilluminator (UVT254/312)
CSL-MDOCUV254/312
CSL-MDOCUV254/3121D
microDOC System with UV Transilluminator (UVT254/365)
CSL-MDOCUV254/365
CSL-MDOCUV254/3651D
microDOC Basic System with lift-off dark room hood and camera only
CSL-MDOCBASIC
CSL-MDOCBASIC1D
Software
Base package*: 1D image analysis plus colony counting and array analysis
TotalLab Quant
Base package*: 1D image analysis with band pattern matching, plus colony counting and array analysis
Phoretix 1D
The Phoretix 1D Pro software is used to perform sophisticated 1D gel analysis.
Phoretix 1D Pro
Accessories
40
Mitsubishi Thermal Printer for use with Microdoc - 110 - 240V
CSL-PRINT
Replacement printer paper
CSL-PRTPAP
Microdoc ethidium bromide filter
CSL-MDOCEB
UV to white light conversion screen for transilluminator
CSL-UVSCRN
Microdoc SYBR filter
CSL-MDOCSBRG
White light box for Micro doc
CSL-MDOCWLB
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
gel documentation
UVIdoc HD2
■ Simple touch button control via front LCD panel
■ Ideal for routine gel documentation and critical quantitative applications
■ Extreme sensitivity even for the faintest fluorescent gels
■ Saturation monitoring of live images to ensure they remain fully
quantifiable
■ Complimentary image capture and analysis software
The UVIdoc HD2 is a standalone gel documentation system. A 1.4 megapixel camera, with 12-bit pixel
depth for increased dynamic range, produces high quality images for publication and quantification.
An easy-share network connection allows images generated within the laboratory to be downloaded
remotely within the office with minimal risk of spreading ethidium bromide contamination, although
four USB ports are available for the simultaneous connection of a USB flash drive, printer and mouse if
required. Standard features include saturation monitoring to ensure images remain fully quantifiable;
an 8.4 inch TFT LCD panel; an epoxy-painted stainless steel cabinet with built-in roll-out 8W
transilluminator; plus a 3-position filter wheel and white light epi-illumination. Also included as
standard is UVIdoc 1D software with its comprehensive gel imaging, analysis and annotation tools.
UVIPURE Technology
Each UVIdoc HD2 may be supplied either with a standard 312nm transilluminator or a transilluminator
with cutting-edge UVIPURE technology. UVIPURE transilluminators contain special filter glass that
eliminates background visible light wavelengths to maximise contrast and signal-to-noise for even the
faintest of fluorescent signals, allowing them to be seen by the naked eye. This allows broad
transmission camera filters to be used within the UVIdoc system, ensuring that maximum transmission
of the fluorescent signal is always achieved.
UVIband
Available separately, UVIband 1D software is designed for powerful and accurate analysis of 1D gels to
produce molecular weight and quantitative data. The software is user-friendly and benefits from a host
of features that include: automatic lane detection; the ability to add new standards and create standard
libraries; background subtraction; 2D and 3D area/lane profiling; free form optical density calibration;
automatic calculation of band and array concentrations. UVIband software is ideal for the following applications: • Gels
• Western Blots
• Dot & Slot Blots
• Arrays
• Microplates
• Colony Counting
UVIBANDMAP
UVIbandmap analysis and database software offers all of the 1D analysis functions of UVIband, but also
benefits from the key features of UVImap software function, which include: database management; band
data pattern matching and dendrogram generation; plus lane identification and multiprobe analysis.
Technical Specifications
Camera
Darkroom
Transilluminator
Type:
Sony Chip CCD Camera with variable shutter speed
Type:
HD2 darkroom
Configuration:
CCD:
ICX205 Sony CCD camera sensor
Construction:
Stainless steel; epoxy coated
• 8W standard or 8W UVI-PURE;
• Built-in roll-out;
Effective Pixels:
1.4 megapixel; 1360 (H) x 1024 (V)
Filters:
3-position filter wheel; EtBr filter
• Single or dual wavelength;
Bit Depth:
12-bit imaging (4096 grey levels)
Display:
8” TFT LCD; 800x600 pixel resolution
• 20x20cm filter
Software
Dynamic range:
4OD; 6x optical zoom
Other features:
Cooling:
Camera passive aluminum cooling enhancer
• Auto-exposure and saturation control;
Configuration:
• Image enhancement
Free multi-license Functions:
Sensitivity:
To within 0.1ng in a DNA stained gel
• Built-in internal memory - stores up to 50 images
• MW calculation
• 4x USB ports; LAN connection
• Band quantification
• Inner white light LED - white light indicator
• Distance calculation (Rf)
• Smart control panel with UV security switch
• Colony counting
Ordering Information
1641 1102 1
1641 1103 1
UVIdoc-HD2 /20M, 230V EU. Includes Software & USB Control unit, Camera,
1440 1001 1
UVIband Software
Manual Zoom, Ethidium Filter, UVIdoc-HD2 Darkroom with 8” TFT LCD screen,
1440 4001 1
UVIbandmap Software
and 8W/312nm Transilluminator with 20x20cm filter
CSL-PRINTUSB
Mitsubishi Thermal Printer for USB input - 110 - 240V
UVIdoc-HD2 /20MX, 230V EU. Includes Software & USB Control unit, Camera,
CSL-PRTPAP
Replacement printer paper
Manual Zoom, Ethidium Filter, UVIdoc-HD2 Darkroom with 8” TFT LCD screen,
CSL-UVSCRN
UV to white light conversion screen for transilluminator
and 8W/312nm UVI-PURE 20MX Transilluminator with 20x20cm filter
Other systems available including computer-based and systems for chemiluminescence and fluorescence
41
uv transilluminators
■ Three wavelength options:
■
■
■
■
254/312/365 nm – two Dual
wavelength models
Long life filter
High efficiency reflector
Hi/Lo intensity switch
Fast start up
Technical Specifications
FILTER SIZE
20 X 20 CM
LIGHT SOURCE:
8W X 6 TUBES
UV RESISTANT PLASTIC COVER:
33 X 25CM (WXD)
UNIT DIMENSIONS WXLXH
34 X 29.5 X 10CM
Available in single and dual wavelength formats, our
transilluminators are supplied either as standalone units
or with the microDOC, as part of a fully integrated gel
documentation system. With a large surface area, each
transilluminator serves as the perfect workstation for
viewing and working with fluorescently-stained protein
and nucleic acid gels.
Standard features include a high/low intensity safety
switch and an efficient starter that allows each of the
six 8-Watt UV tubes to energise quickly without
flickering, while special filter glass minimises unwanted
background light. All of these features maximise
contrast and sensitivity, allowing even the faintest
fluorescent gels to be viewed. Two dual wavelength
models offer added flexibility and convenience.
Ordering Information
CSLUVTS254
UV Transilluminator, small, 21 x 21 cm, 254 nm
CSLUVTL254
UV Transilluminator, large, 21 x 26 cm, 254 nm
Replacement Parts and Accessories
CSLUVTS312
UV Transilluminator, small, 21 x 21 cm, 312 nm
CSLUVTL312
UV Transilluminator, large, 21 x 26 cm, 312 nm
CSL-Txxx
8W UV bulb (xxx = 254nm, 312nm or 365nm)
CSLUVTS365
UV Transilluminator, small, 21 x 21 cm, 365 nm
CSLUVTL365
UV Transilluminator, large, 21 x 26 cm, 365 nm
CSL-ST4/20
Starter for 4/20W UV Tubes
CSLUVTSDUO
UV Transilluminator, small, 21 x 21 cm, 254/365 nm
CSLUVTLDUO
UV Transilluminator, small, 21 x 26 cm, 254/365 nm
CSL-UVPS22
UV Transparent Cutting Platform 22 x22cm
CSLUVTLDUO312 UV Transilluminator, small, 21 x 26 cm, 254/312 nm
CSL-UVPS27
UV Transparent Cutting Platform 22 x27cm
CSLUVTSDUO312 UV Transilluminator, small, 21 x 21 cm, 254/312 nm
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
Safecloner
■ Safe, UV-free illumination of gels
■ Increased sensitivity and
contrast of DNA bands
■ Enhanced cloning efficiency of
DNA viewed with SafeCloner
compared to DNA eluted from
UV-irradiated gels
SafeCloner is a new tool for safe UV-free visualisation of DNA gels stained with ethidium bromide, SYBR
Safe and SYBR green. SafeCloner’s special filter glasses and blue epi-LED illuminator allow the operator to
view DNA gels at greater contrast and sensitivity than is possible with standard long wavelength UV
transilluminators. Blue epi-LED illumination of gels is entirely harmless to DNA and operator alike, ensuring
that the DNA within the gel remains free of UV-induced damage. Consequently, DNA fragments isolated
from gels viewed using SafeCloner have dramatically improved cloning efficiency compared to DNA
fragments eluted from UV-illuminated gels.
Ordering Information
CSL-ETBRCLONER
Complete unit for safe viewing of ethidium bromide stained gels
CSL-ET/SYBRCLONER Complete unit for safe and DNA damage free viewing of ethidium bromide, SYBR green and SYBR gold stained gels
Each SafeCloner unit includes LED illuminator for gels up to 15x15cm, filter glasses and a mains plug-in power supply.
CSL-GLASSES1
Filter glasses for CSL-ETBRCLONER, 1 pair
CSL-GLASSES
Filter glasses for CSL-ET/SYBRBR, 1 pair
uv crosslinker
■ Programmable microprocessor
control
■ Automatic monitoring of UV energy
■ Small footprint with large interior
■ Conspicuous front panel LED, with
non-UV transmissible front door
connected to safety interlock
switches
The UVIlink UV crosslinker is especially designed for
binding nucleic acids to membranes. A membrane keypad
facilitates manual or preset control of the desired UV
dosage and exposure time, while a highly accurate
microprocessor-controlled photo-feedback system
maintains uniform output from each of the crosslinker’s five
8-Watt UV bulbs. Other features comprise safety interlock
switches to prevent accidental UV leakage during operation,
a clearly visible LED, plus a large interior chamber and
small footprint area. The crosslinker may be used in a
variety of applications, such as colony or plaque lifts, UV
sterilisation and gene mapping or DNA damage studies.
Technical Specifications
UV SOURCE
5X8W UV BULBS, 254, 302 OR 365NM
EXPOSURE TIME
0 – 999.9 MINUTES
ENERGY RANGES
0 – 99.99 J OR 0 – 9.999 J
INTERNAL DIMENSIONS
26X33X14.5CM (WXDXH)
FOOTPRINT
35X36CM
Ordering Information
CL-508.G
42
Shortwave crosslinker, 254nm
CL-508.M
Midrange crosslinker, 302nm
CL-508.BL
Longwave crosslinker, 365nm
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
heaters and stirrers
■ Large work surface, 19 x 19 cm
■ Space saving design, 20 x 23
cm Footprint
■ Chemical resistant white
ceramic top plate
■ Safety LEDs indicate when
heating or stirring
■ Quick and easy adjustment of
heating/mixing
Cleaver Scientific hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, chemically
resistant, white ceramic work surface. Their space-efficient design (20 x 23 cm footprint), makes them
ideal for use on crowded bench tops and inside cabinets.
Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and
maintenance of speed and temperature. A safety indicator LED on each front panel indicates when the
heating and stirring functions have been activated. With a square 19 x 19 cm work surface, all three
models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles
and other vessels.
The hotplate/magnetic stirrer model (CSL Hotplate) comes complete with a support rod for mounting
thermometers and temperature probes.
Ordering Information
Technical Specifications
SPEED RANGE:
60-1500 RPM (STIRRING UNITS ONLY)
TEMP. RANGE:
(HEATING UNITS ONLY)
AMBIENT +5° TO 380°C
PLATFORM:
19 X 19CM
CSL Hotplate, 19 x 19 cm
CONTROL:
QUICK ADJUSTMENT KNOBS
CSL-HOTSTIR
CSL Hotplate Magnetic Stirrer 19 x 19 cm
DIMENSIONS:
20(W) X 23(D) X 11.5(H) CM
CSL-STIR
CSL Magnetic Stirrer, 19 x 19 cm
ELECTRICAL DATA:
120V, 60 HZ / 230V, 50/60 HZ
CSL-HOTPLATE
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
quickspin
The Quickspin ‘Purple’ is perfect for
microfiltration and rapid spin-down
of sample from the walls and
caps of microcentrifuge tubes.
By occupying less than 6 inches
square of bench space, the
Quickspin ‘Purple’ has a very
small footprint, making it easy to use
in the lab. Rotors and adaptors,
which may be easily interchanged,
are supplied as standard to
accommodate 1.5 ml, 0.5 ml and 0.4
ml tubes, as well as 0.2 ml strips and
individual tubes.
A highly durable stainless steel hinge pin facilitates easy
opening of the translucent lid, while an on/off switch is located on the side of the centrifuge to start and
stop operation. Alternatively, with the switch in the ‘on’ position, the centrifuge can be started and
stopped by closing and opening the lid.
Ordering Information
CSLQSPIN
Spectrafuge Mini complete with 1.5/2.0 ml rotor, strip tube rotor, 0.5 and 0.4 ml adapters, Purple lid
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
■ Supplied with both standard
microtube and strip tube rotors
■ Ideal for quick spin-downs and
microfiltration
■ Starts and stops in seconds
■ Compact design
Technical Specifications
MAXIMUM SPEED
6000RPM
MAXIMUM G FORCE
2,000 X G
CAPACITY
6 X 1.5/2.0 ML
2 X 0.2ML STRIPS
DIMENSIONS (W X D X H)
15 X 15 X 11.7 CM
WEIGHT
0.45 KG
43
vortex
■ Powerful, reliable motor with
optimised counter balance
■ Circular orbit for effective vortexing
at any speed
■ CombiCup head accepts a variety of
tube sizes
■ Versatile head attachment
accessories for microplates and
different tube sizes
Technical Specifications
SPEED RANGE
115V
230V
0 - 3400 RPM
0 - 2850 RPM
OPERATING MODES
TOUCH OR CONTINUOUS
AMBIENT OPERATING RANGE 4 - 65°C
DIMENSIONS (WXDXH)
14CM X 16CM X 13CM
WEIGHT
2.2KG
ELECTRICAL
115V OR 230V, 50/60HZ
Cleaver Scientific’s new variable speed Vortex Mixer combines fast, efficient mixing with minimal
vibration. Unlike other vortex mixers using elliptical orbits, the
CSLVORTEX true circular orbit facilitates uniform sample-vortexing
even at low speed. The CombiCup™ head, which is supplied as
standard, accepts many different tube sizes, while the
unique overmoulding technology used in its
manufacture provides a sturdy plastic core with
non-slip TPE that fits optional heads for
microplates, microtubes, PCR strip tubes, 15ml
and 50ml tubes and blood vials.
CSLVORTEX may be used in ‘touch’ or
continuous mode: ‘touch’ mode being
activated by simply depressing the sample
head and then stopped by releasing the
pressure. An optimised counter balance
system within the CSLVORTEX minimises
vibration and movement of the unit during operation, whereas its
lightweight construction and small footprint allows it to be readily transported and used in areas where
space is restricted. The CSLVORTEX is also safe for use in temperature controlled environments, and
may be used within a cold room.
Ordering Information
CSLVORTEX
Cleaver Vortex Mixer with general purpose head
S0200-23
Optional Head Attachment for 8 x 15ml and 8 x 12/13mm Diameter Tubes
S0200-21
Optional Head Attachment for 24 x 1.5/2.0ml Tubes, 24 x 0.5ml Tubes and
S0200-24
Optional Head Attachment for 6 x 50ml Tubes
32 X 0.2ml Tubes (or 4 Tube Strips)
SO200-25
Optional Head Attachment for 12 x 1.5/2.0ml Tubes, Held Horizontally
Optional Head Attachment for 1 Microplate or 64 x 0.2ml Tubes or 8 x 0.2ml
S0200-26
Optional Head Attachment for 4 x 15ml Tubes, Held Horizontally
Tube Strips
S0200-27
Optional Head Attachment for 2 x 50ml Tubes, Held Horizontally
S0200-22
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
MiniMix 3D shaker
■ The perfect speed and tilt for
blotting and gel staining
The Cleaver Scientific MiniMix combines the motions of orbital shaking and rocking to produce a gentle,
but thorough, 3-D action that is perfect for antibody incubation of western blots and staining gels.
■ Three-dimensional motion
The pitch and speed of the Cleaver Scientific MiniMix are optimised to generate a tilt angle that is large
enough to ensure uniform distribution of solutions, yet small
enough to prevent the centre of the blot from drying out.
This has the added benefit of allowing users to work
with minimal volumes, thus conserving valuable
probes and antibodies.
■ Designed for use with Blot Boxes
A non-slip rubber mat keeps the boxes in place on
the agitating platform, which, along with the housing, is
very easy to clean and decontaminate after use. The
MiniMix’s compact and light weight design allows it to
be moved around the lab where needed. It is also safe for
use in an incubator or cold room for temperature controlled reactions.
Blot Boxes
Technical Specifications
44
SPEED
18RPM (115V) / 20 RPM (230V)
MOTION
3-D, NUTATING
TILT ANGLE
5°
These gel staining/blotting boxes are available in 4 sizes and are the ideal accessory for incubating
blots or staining gels. The two smaller sized boxes are available in packs of ten. The smallest box has
dimensions of 9.1 x 6.6cm and a capacity for 3-5ml of solution.
This is ideal for incubating cut blot strips. The next box in the range holds 6-10ml of solution and is
appropriate for mini gels and blots up to 11.7 x 8.9cm. Two larger boxes, available in single packs, can
be used for staining gels or incubating blots up to 12 x 12cm or 20 x 16.5cm respectively.
PLATFORM SIZE (WXD)
20X16.5CM
AMBIENT OPERATING RANGE
4-65°
Ordering Information
DIMENSION (WXDXH)
20.3X17.8X10.5CM
CSL3DSHAKER
MiniMix 3D Shaker with 20x16.5cm tray and non-slip rubber mat, 230V
WEIGHT
0.88KG
CSL-BB9X6
Gel/Blot box, 9.1 x 6.6cm, 3-5ml capacity, 10/pack
CSL-BB12X12
Gel/Blot box, 12 x 12cm, 1/pack
ELECTRICAL
115/230V 50/60HZ
CSL-BB11X8
Gel/Blot box, 11.7 x 8.9cm, 6-10ml capacity, 10/pack
CSL-BB20X16.5
Gel/Blot box, 20 x 16.5cm, 1/pack
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
cube dry baths
Cleaver Scientific’s Cube digital dry baths are available in single and dual block models, and comprise a
comprehensive range of interchangeable blocks. Each digital dry bath is compact, easy-to-use and
excellent value for money.
■ Microprocessor control with
Interchangeable quick-change blocks have fast heat-up times and reproducible temperature uniformity
and accuracy, and may be used in a variety of applications, which include: restriction digestion, BUN,
melting agar, coagulation studies, hybridisation, Hot Start PCR® reactions and DNA denaturation.
Because of an impermeable moulded aluminium alloy block construction, each Cube dry bath may also
be adapted as a mini water bath incubator if desired.
■
Both dry baths incorporate a digital microprocessor controller for accurate temperature control in 0.1°C
increments from ambient +5°C to 150°C. Rapid and easy programming is facilitated by the easy to use
arrow keys on the sloped front panel, while both the temperature and running time are shown
simultaneously on the conspicuous dual digital LCD display. Two software options are available for data
logging to a PC and computer control (please enquire).
■
■
■
■
digital performance for precise,
accurate control
Wide temperature control range
with excellent uniformity
Rapid temperature increase rate
LCD screen showing timer and
temperature simultaneously
User temperature calibration
Data logging and function
control software available
Ordering Information
SINGLE BLOCK
TCDB-01
DUAL BLOCK
TCDB-02
Accessories
MD-MP01-S
MD-MP02-S
MD-MP01-D
MD-MP02-D
MD-B0.5/1.5
The Cube Dry Bath Incubator (one block unit); without block 220V
The Cube Dry Bath Incubator (dual block unit); without block 220V
Block for Microplate; Titerplate Plain Block for Single Block Unit Only
Block for 96 wells deep Microplate or PCR plate for Single Block Unit Only
Block for Microplate; Titerplate Plain Block for Dual Block Unit Only
Block for 96 wells deep Microplate or PCR plate for Dual Block Unit Only
Double side block: one side for 1.5 or 2.0 ml tube, 20 wells; Opposite side for
0.5 ml tube, 30 wells
MD-B0.5PLUS1.5 Combination block : for 0.5 ml tube, 12 wells and for 1.5 or 2.0 ml tube,
12 wells (on the same side)
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
MD-B0.2
MD-B0.5
MD-B1.5
MD-B13
MD-B17
MD-B20
MD-B25
MD-B29
MD-RS232
MD-DLSW
Block for 0.2 ml tube, 64 wells or for 0.2 ml PCR strip tubes for 8 wells x 8
Block for 0.5 ml tube, 20 wells
Block for 1.5 ml tube, 20 wells
Block well size 13 mm, 20 wells
Block for 15 ml centrifuge tube, 12 wells
Block well size 20 mm, 12 wells
Block well size 25 mm, 6 wells
Block for 50 ml centrifuge tube, 4 wells
RS232 Cable
Single License Software Package for Datalogging
MD-PCSW
Single License Software Package for Datalogging and Computer-controlled
Temperature Setting
Custom made blocks also available
rockers and shakers
Technical Specifications
Cat. No.
MS-NOR
MS-NRC
MS-NRK
MW-23
Motion
Orbital
Reciprocal
Rocking
3-D Combi
20mm
20mm
12°
Orbital: 0.1 ~ 10.0
circular; 0.1
circular increment
Reciprocal:1~10
for 2.0 ~ 20 mm;
1 scale increment
Stroke Length
Operation Mode
20mm
Orbital and
Rocking combined
Speed
0~200 rpm
5~100 rpm
5~100 rpm
5~100 rpm
Timer
0~9999m, ins,
1 min increment
0~9999m, ins,
1 min increment
0~9999m, ins,
1 min increment
0~9999m, ins,
1 min increment
Digital microprocessor
controller
Digital microprocessor
controller
Digital microprocessor
controller
Digital microprocessor
controller
4 digital red LED
4 digital red LED
4 digital red LED
4 digital red LED
4~40°C
4~40°C
4~40°C
0~50°C
15 kg
15 kg
15 kg
15 kg
Yes
Yes
Yes
Controller
Display
Operating Temperature
Carry Capacity
Adjustable Platform
Special Functions
2 way direction
Platform Dimension
Operating Power
Weight 8 kg
Cleaver Scientific rockers and shakers are
available in four different models, each model
offering benefits that include: outstanding uniform
motion and low noise; microprocessor based
keypads with digital control and display of preset
time, continuous time, action scale and speed; and
high quality stainless steel platforms with pop-on/
pop-off installation holes to secure samples. All
models are lightweight and portable for easy
transportation from the bench to incubator and
cold room alike, while additional platforms may be
added for increased capacity.
Models are available as per Ordering Information
below.
Yes
Angle 0-25°
W260 x L260mm
W260 x L260mm
W260 x L260mm
W330 x L330mm
110 / 220V
110 / 220V
110 / 220V
110 / 220V
8 kg
8 kg
8 kg
10 kg
Ordering Information
MS-NOR
Orbital shaker with 26 x 26cm platform and non slip rubber mat.
MS-NRC
Reciprocal shaker with 26 x 26cm platform and flat non slip rubber mat.
MS-NRK
Rocking Shaker with 26 x 26cm platform and flat non slip rubber mat.
MW-23
Combination 3-D shaker with 3-D shaking and rocking for maximal fluid movement; includes 26 x 26cm
platform and flat non slip rubber mat
MW-WB
MW-23 3-D Combishaker
Hybridisation Water Bath (ambient to 95°C) for use with MW-23
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
45
extreme temperature dry baths
Cleaver Scientific’s Extreme Temperature dry baths have a working temperature range of -10°C to
100°C, making them broadly suited to techniques that use the extremities of temperature, such as DNA
ligation (12°C) and denaturation (96°C). Each dry bath comprises a large conspicuous 2.6” LCD screen,
and has operation modes for constant temperature and time, annealing and 1 to 4 programmable steps,
each with a maximum of 9 cycles. The Extreme Temperature dry baths also benefit from microprocessor control and specially designed aluminium block inserts with superior cooling and heating
properties. The Superior Extreme Temperature dry bath has a shallower block insert with enhanced
thermal transfer properties. Optional function control software is available.
Ordering Information
Dry Baths
MC-01N
Extreme Temperature Dry Bath Incubator; without block 110/220V
MC-B0.5+1.5
MC-01S
Superior Temperature Dry Bath Incubator; without block 110/220V
(On the same side)
MC-B0.2+0.5+1.5
Accessories
MC-MP01
For Microplate; Titerplate (Plane bottom)
Combination: 1.5 or 2.0 ml tube, 15 well and 0.5 ml tube, 15 wells
Combination: 0.2 ml tube (or Strip tube for 8 wells), 24 wells, 1.5 or 2.0 ml
tube, 10 well and 0.5 ml tube, 10 wells
MC-MP02
For 96 wells Deep Microplate; PCR Plate or 0.2 ml PCR Strip Tube
MC-B0.2H
(1/2) Half Block for 0.2 tube or PCR Strip tube for 8 wells, 40 wells
MC-B0.5
For 0.5 ml tube, 30 wells
MC-B0.5H
(1/2) Half Block for 0.5 ml tube, 15 wells
MC-B1.5
Well size: 10 mm, For 1.5 or 2.0 ml tube, 30 wells
MC-B1.5H
(1/2) Half Block for 1.5 or 2.0 ml tube, 15 wells
Other blocks also available
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
stirring water baths
A powerful magnetic stirring mechanism combined with high wattage heating allows each Cleaver
Scientific stirring water bath to maintain temperatures to a maximum 99°C. Available in 10 and 20 litre
bath capacities, these water baths comprise as many as 3 stirrers for a maximum stirring speed of
1800rpm. Each bath includes a conspicuous front-panel LCD, reproducible microprocessor control of
temperature within 0.1°C increments, a corrosion resistant stainless steel interior and automatic alarm
and safety shutdown mechanism. Optional data logging and PC control software is also available.
Ordering Information
SWB-10L-1
Stirring Water Bath 10L with 1 built-in stirrer
ACCESSORIES
SWB-10L-2
Stirring Water Bath 10L with 2 built-in stirrers
SWB-LID10
Transparent lid for 10L stirring water bath
SWB-20L-1
Stirring Water Bath 20L with 1 built-in stirrer
SWB-LID20
Transparent lid for 20L stirring water bath
SWB-20L-3
Stirring Water Bath 20L with 3 built-in stirrers
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
glove boxes
Available in 4 sizes, Cleaver Scientific glove boxes are an ideal cost-effective solution for those
scientists performing functions where containment is paramount. A robust construction from nonreactive polycarbonate allows each glove box to be used with inert gases such as helium, nitrogen and
argon, making them well suited to functions requiring the exclusion of atmospheric oxygen and
moisture. Each box, which includes hermetically-sealed gauntlets and a side panel as standard,
provides a safe barrier between the worker and any potential contaminant. These boxes may also be
supplied with airlocks and pressure-relieving valves at little extra cost.
Ordering Information
46
CSL-GB24
Standard 2 port 60 x 60 x 60cm
For additional accessories, please add the suffixes as follows (e.g. CSL-GB24A)
CSL-GB36
Standard 2 port 90 x 60 x 60cm
A
Air Lock only
CSL-GB48
Standard 2 port 120 x 60 x 60cm
V
Valves only
CSL-GB60
Standard 2 port 150 x 60 x 60cm
AV
Air Lock and Valves
hybridisation/incubators
With 21 models available, Cleaver Scientific incubators offer the utmost in choice and flexibility to the
laboratory scientist. Each incubator model comprises microprocessor control of temperature in precise 0.1°C
increments as well as continuous and programmable timer function, which are easily viewed within a 2.6” LCD
screen. Advanced ventilation design technology maintains temperature uniformity and accuracy within ±0.2°C.
The standard incubator model is supplied with stainless steel mesh shelves, while other more sophisticated
models are available with specialist vortex, orbital, rocking and reciprocal shaking platforms. All of the
incubators, except the basic model, may be supplied with hybridisation rotisseries for enhanced function.
HYBRIDBASIC
HYBRIDORB-R-8,-16 & -24
Entry model, HYBRIDBASIC provides a uniform
temperature environment, controlled by a digital
microprocessor. The internal air circulation system
ensures that the temperature is homogenous while
the user friendly, intuitive interface and digital display
allow easy operation and control.
The HYBRIDORB-R incubator has all the benefits of
the HYBRIDORB but has the added versatility of the
rotisserie system for holding the full variety of
hybridization tubes available.
■
HYBRID-R-8, -16 & 24
■
The HYBRID-R incubator has all the features of the
HYBBASIC with the added benefit of a Rotisserie
system. The rotisserie system allows for up to 24
hybridization tube samples to be incubated at a time.
Three different rotisserie options are available for 8 x
35mm tubes, 16 x 50ml tubes or 24 x 15ml tubes.
■
HYBRIDVX
HYBRIDVX features the same digitally controlled
environment with the added benefit of a vortex platform for
4 microplates. Vortex action can vibrate from 5-1500rpm.
HYBRIDROK
HYBRIDVX-R-8, -16 & 24
The HYBRIDROK incubator includes a rocking shaker
platform which allows the mixing of different sized
containers simultaneously in a uniform temperature
environment. The platform is 270mm x 200mm,
allows stacking of an additional platform and is
controllable from 5-100rpm.
The HYBRIDVX-R incubator has all the benefits of the
HYBRIDVX but has the added versatility of the
rotisserie system for holding the full variety of
hybridization tubes available.
HYBRIDROK-R-8, -16 & 24
HYBRIDREC
The HYBRIDROK-R incubator has all the benefit of the
HYBRIDROK but has the added versatility of the
rotisserie system for holding the full variety of
hybridization tubes available.
The HYBRIDREC incubator has a reciprocating
platform enabling the user to place samples on a flat
surface when only side to side motion is required on
a 270mm x 200mm stackable surface. The
reciprocating action can be controlled from 5-100rpm.
HYBRIDREC-R-8, -16 & 24
The HYBRIDREC-R incubator has all the benefits of
the HYBRIDREC but has the added versatility of the
rotisserie system for holding the full variety of
hybridization tubes available. The system allows
stacking of an additional platform.
HYBRIDORB
The HYBRIDORB is equipped with an orbital shaker
which can rotate from 0 - 200rpm. The platform has
fittings which allow different sized samples to be
processed at one time. An additional platform can be
stacked, increasing capacity.
HybridREC-R-8, -16, -24
HybridORB-R-8, -16, -24
HybridBASIC
HybridVX-R-8, -16, -24
HybridROK-R-8, -16, -24
■
■
■
Digital Microprocessor Control
128 x 64 Dot Matrix Display
Chamber Temperature: Ambient
to 85°C
Temperature Increase: 0.1°C
Temperature Uniformity
Chamber Temperature
Accuracy at 37°C ± 0.2°C
Technical Specifications
CHAMBER TEMPERATURE
AMBIENT TO 85°C
TEMPERATURE INCREASE
0.1°C
TEMPERATURE UNIFORMITY IN
WORKING AREA AT 37°C
± 0.2°C
CHAMBER TEMPERATURE
ACCURACY AT 37°C
± 0.2°C
ROTISSERIE SPEED (ALL MODELS)
5-100 RPM
VORTEX PLATFORM SPEED
5-1500 RPM
ORBITAL PLATFORM SPEED
0-200 RPM
ROCKING PLATFORM SPEED
5-100 RPM
RECIPROCAL PLATFORM SPEED
5-100 RPM
CHAMBER DIMENSIONS
340X260X250 MM
OVERALL DIMENSIONS
360X440X430 MM
WEIGHT
25 KG (APPROX)
Hybrid-R-8, -16, -24
HybridORB
Ordering Information
Incubator System
CSL-HYBRIDBASIC
CSL-HYBRIDVX
CSL-HYBRIDROK
CSL-HYBRIDREC
CSL-HYBRIDORB
n/a
Accessories
CSL-HYB-SSMP
CSL-HYB-SH
CSL-HYB-8RT
CSL-HYB-16RT
CSL-HYB-24RT
CSL-HYB-P2720
Incubator only with 2 stainless steel shelves
Vortex Incubator with 200x300mm platform for 4 microplates
Rocking Incubator with 270x200mm platform
Reciprocal Incubator with 270x200mm platform
Orbital Incubator with 270x200mm platform
Hybridisation Incubator
8x 40mm Tube Rotisserie
n/a
CSL-HYBRIDVX-R8
CSL-HYBRIDROK-R8
CSL-HYBRIDREC-R8
CSL-HYBRIDORB-R8
CSL-HYBRID-R8
Stainless Steel Mesh Plate 32.5 x 34.5 cm for MO-01
CSL-HYBFH-250
Supporting Holders for Stainless Steel Mesh Plate, pack of 4
CSL-HYBFH-500
35 mm tube Rotisserie for 8 tubes
CSL-HYBBT40X150
50 ml conical tube Rotisserie for 16 tubes
CSL-HYBBT40X200
15 ml conical tube Rotisserie for 24 tubes
CSL-HYBBT40X300
27 x 20 cm Platform for Rocking Shaker, Reciprocal Shaker, Orbital Shaker and Vortex Shaker
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
Including Hybridisation Rotisserie
16x 40ml conical tube rotisserie
n/a
CSL-HYBRIDVX-R16
CSL-HYBRIDROK-R16
CSL-HYBRIDREC-R16
CSL-HYBRIDORB-R16
CSL-HYBRID-R16
24x 15ml tube rotisserie
n/a
CSL-HYBRIDVX-R24
CSL-HYBRIDROK-R24
CSL-HYBRIDREC-R24
CSL-HYBRIDORB-R24
CSL-HYBRID-R24
250 ml Flask Holder
500 ml Flask Holder
Glass Bottle 40 x 150 mm
Glass Bottle 40 x 200 mm
Glass Bottle 40 x 300 mm
Please enquire about the lead times of these products before ordering.
47
UV sterilisation cabinets
■ Inactivates nucleic acids in
■
■
■
■
5 to 30 minutes
Doors fitted with safety switches
Complete with four powerful, timer
controlled UV bulbs
Efficient decontamination of the
complete work surface
Suitable for work with 32P
These UV Sterilisation Cabinets provide a convenient
area for setting up PCR reactions in a nucleic acid free
environment thus limiting PCR reaction contamination.
Acting effectively as a low cost alternative to a clean
room, the powerful UV lights on the cabinets denature
nucleic acids in 5 to 30 minutes making them
unsuitable for amplification. The cabinet incorporates
safety features to prevent user exposure to UV light.
The UV lights themselves are timer controlled and there are
safety switches on the cabinets doors which turn off the UV
lights when opened.
The cabinets also act as an efficient shield of beta radioactive
emissions and can therefore be safely used with isotopes
such as 32P.
White light provides excellent visibility when working
within the cabinets.
For use with trays of size 68 x 54cm,
CSR-TW4/TY4/TL4.
With the benefits comparable to those offered by the
CSL-UVCAB, the new Mini UV Cabinet is the perfect
solution for laboratories constrained by space and
budget. A reduced height and footprint allows the Mini
UV Cabinet to fit snugly and conveniently into those
small areas within the laboratory that would otherwise
remain unused.
Technical Specifications
CSL-UVCABMINI
Ordering Information
UV LIGHTS
MAXI 4 X 15 WATT MINI
4 X 15 WATT
CSL-UVCAB
UV sterilisation cabinet with timer, four UV lights and white light, no Tray
WHITE LIGHT
MAXI 15 WATT
15 WATT
CSL-UVCABMINI
Mini UV sterilisation cabinet with timer, UV light and white light, no Tray
DIMENSIONS
MAXI 770 (H) X 560 (W) X 420MM (D)
MINI 510 (H) X 560 (W) X 350MM (D)
CSL-UVTUBE
Replacement UV tube for cabinets
CSL-WHITETUBE
Replacement White Light tube for cabinets
MAXI 19 KG
CSR-TW4
General Purpose Tray White - 68 x 54cm
WEIGHT
MINI
MINI
12 KG
CSR-TY4
Radiation Hazard Tray Yellow - 68 x 54cm
CSR-TL4
Liners - 68 x 54cm, Pk/25 (for cabinet)
For 110 V AC, please add ‘-$’ as a suffix to the appropriate code
other products
Also on offer through Cleaver Scientific are: 1. Custom combs and gel trays
2. Pipettes
3. Thermal Cyclers
4. Fermentation Systems
5. Transfection Systems
6. Balances
For flyers and pricing, please contact sales@cleaverscientic.com or phone +44 (0)1788 565300.
48
coolcube
■ Maintains 0°C for four hours
Technical Specifications
■ Holds both microtubes and a PCR plate
TEMPERATURE:
0°C FOR UP TO 4 HOURS
■ Can be used as a PCR workstation
CAPACITY:
36 X 1.5ML
96 X 0.2ML
12 X 0.2ML PCR STRIPS
1 X 96 WELL PCR PLATE
The CoolCube is designed to store samples
safely on the lab bench without sample
degradation caused by temperature increase
or fluctuation. The CoolCube maintains
temperature at approximately 0°C for up to four
hours. Simply place the CoolCube in a freezer
overnight and it will be ready to use.
DIMENSIONS:
142 X 142 X 63.5MM
WEIGHT:
900G
MATERIAL:
DURASTAR POLYMER
0°C CoolCube
Sample Temperature vs. Time
One side of the CoolCube can be used as a
convenient PCR workstation for 12 standard
1.5/2.0ml microtubes with one 96 well PCR plate, or with 12x 0.2ml
strips or 96x0.2ml tubes. The other side may be used to hold up to 36
standard 1.5/2.0ml microtubes.
5
T
E
M
P
E
R
A
T
U
R
E
ice buckets
0
-5
(°C)
-10
0
1
2
3
4
5
6
Time (hours)
■ Durable plastic construction
■ Easily cleaned
■ Excellent long term thermal storage
Cleaver Scientific Ice Buckets are constructed of durable plastic and offer both robustness and long life.
They will also withstand reasonable use with dry ice. Lids are available for the the large bucket.
Ordering Information
CSLIB
Large Ice Bucket - White
CSMIB
CSLIBLID
Lid For Large Ice Bucket - White
CSL-COOLCUBE Coolcube Storage Rack
Mini Ice Bucket - White
tube racks
Available in four different colours – red, blue, green and yellow – for easy identification, Cleaver
Scientific tube racks are ideal for scientists performing techniques requiring multiple 0.5, 1.5 and 2 ml
tubes. All tube racks are made from either standard 3mm acrylic for ordinary use or autoclavable PVC
that is suitable for work in containment areas, such as tissue culture rooms, where sterilisation of
equipment is necessary after use.
MicroRacks
Microracks are ideal for routine use with 60x 0.5ml or 50x or 100x 1.5ml microcentrifuge tubes. With a
small footprint of 80x80mm these racks are perfect for areas where space is limited. Because these
racks have an open base, samples may be placed in direct contact with ice or water for sample incubation.
Combi-Racks
Configured in 6 rows of 12 holes, with Row 1 accommodating 12x 1.5/2ml tubes, and Rows 2-6 for a
maximum 48x 0.2ml tubes, Cleaver Scientific Combi-Racks are well-suited to thermal cyclers or dry
baths with blocks for up to sixty 0.2/1.5ml tubes.
Ordering Information
CSR-TR1B
60 X 0.5 ml Tube Rack - Blue
CSR-TR2B
50 x 1.5 ml Tube Rack - Blue
CSR-TR3BPVC 100 X 1.5 ml Tube Rack - Blue PVC - Autoclavable
CSR-TR1BPVC 60 X 0.5 ml Tube Rack - Blue PVC - Autoclavable
CSR-TR2BPVC 50 x 1.5 ml Tube Rack - Blue PVC - Autoclavable
CSR-TR3G
CSR-TR1G
CSR-TR2G
CSR-TR3GPVC 100 X 1.5 ml Tube Rack - Green PVC - Autoclavable
60 X 0.5 ml Tube Rack - Green
50 x 1.5 ml Tube Rack - Green
100 X 1.5 ml Tube Rack - Green
CSR-TR1GPVC 60 X 0.5 ml Tube Rack - Green PVC - Autoclavable
CSR-TR2GPVC 50 x 1.5 ml Tube Rack - Green PVC - Autoclavable
CSR-TR3R
100 X 1.5 ml Tube Rack - Red
CSR-TR1R
60 X 0.5 ml Tube Rack - Red
CSR-TR2R
50 x 1.5 ml Tube Rack - Red
CSR-TR3Y
100 X 1.5 ml Tube Rack - Yellow
CSR-TR1RPVC 60 X 0.5 ml Tube Rack - Red PVC - Autoclavable
CSR-TR2Y
50 x 1.5 ml Tube Rack - Yellow
CSR-TR3YPVC 100 X 1.5 ml Tube Rack - Yellow PVC - Autoclavable
CSR-TR1Y
CSR-TR2YPVC 50 x 1.5 ml Tube Rack - Yellow PVC - Autoclavable
60 X 0.5 ml Tube Rack - Yellow
CSR-TR1YPVC 60 X 0.5 ml Tube Rack - Yellow PVC - Autoclavable
CSR-TR3B
100 X 1.5 ml Tube Rack - Blue
49
radiation safety
Available in standard 10mm beta-protecting acrylic,
12mm gamma-attenuating lead acrylic and also as duo
shielding for protection against both types of emission,
Cleaver Scientific’s comprehensive range of Radiation
Safety Products comprises a large selection of shields,
boxes, waste bins, trays, plus assorted accessories and
cabinets.
Shields
Supplied in small, medium and large sizes and with
curved base 15cm-deep for use with safety trays or flat
30x30cm base for under-the-bench protection. A range
of angles offers increased manoeuvrability, while clear
optical acrylic aids visualisation.
Ordering Information
BETA
GAMMA
CSR-S1
CSR-S1G
Small Fixed 15° Angle - Flat Base 30 x 45cm, Base 30 x 30cm
BETA
CSR-S3
GAMMA
CSR-S3G
3-Sided Front 46 x 50cm, Sides 30 x 50cm
CSR-S1T
CSR-S1TG
Small Fixed 15° Angle - Curved Base 30 x 45cm
CSR-S4
CSR-S4G
Hourglass Shield - Flat Base 30 x 45cm, Base 30 x 30cm
CSR-S4TG
Hourglass Shield - Curved Base 30 x 45cm
CSR-S2
CSR-S2G
Large Fixed 15° Angle - Flat Base 35 x 53cm, Base 35 x 30cm
CSR-S4T
CSR-S2T
CSR-S2TG
Large Fixed 15° Angle - Curved Base 35 x 53cm
CSR-SFLEXI CSR-SFLEXIG
CSR-S1O
CSR-S1OG
Small Fixed 45° Angle - Flat Base 30 x 45cm, Base 30 x 30cm
CSR-SF
CSR-SFG
Base Plate 45 x 41cm
CSR-S1OT
CSR-S1OTG
Small Fixed 45° Angle - Curved Base 30 x 45cm
-
CSR-SDUO
DuoShield - Curved Base, Beta/Gamma 30 x 45cm
-
CSR-SFLEXITG Shield - Adjustable, 35 x 54 or 54 x 35cm, 35mm thick
CSR-S2O
CSR-S2OG
Large Fixed 45° Angle - Flat Base 35 x 60cm, Base 30 x 30cm
CSR-S2OT
CSR-S2OTG
Large Fixed 45° Angle - Curved Base 35 x 60cm
Shield - Adjustable 35 x 54 or 54 x 35cm
Trays and Liners
Available in general purpose, biohazard and radiation safety formats, spilltrays provide a re-usable work
area with the added benefit of safe containment of spillages and lab bench protection. All trays supplied
with one free liner when purchased. Additional environmentally friendly APET liners provided in packs
of 25.
Ordering Information
Tray Size
Radiation Hazard Tray, Yellow
BioHazard Tray, White
General Purpose Tray, White
APET liners, pk 25
46x26cm
CSR-TY1
CSR-TO1
CSR-TW1
CSL-TL1
54x34cm
CSR-TY2
CSR-TO2
CSR-TW2
CSL-TL2
57x54cm
CSR-TY3
CSR-TO3
CSR-TW3
CSL-TL3
68x54cm
CSR-TY4
CSR-TO4
CSR-TW4
CSL-TL4
70x46cm
CSR-TY5
CSR-TO5
CSR-TW5
CSL-TL5
113x54cm
CSR-TY6
CSR-TO6
CSR-TW6
CSL-TL6
Cabinets
Cleaver Scientific cabinets provide a convenient area to carry out work with beta and gamma emitting
isotopes with complete all round protection. Each cabinet’s 49 x 55 x 37cm dimensions offer a large
working area without impeding vision, either in a standing or seated position.
Ordering Information
50
BETA
GAMMA
CSR-CAB
CSR-CABG
Beta Work Cabinet, 49 x 55 x 37cm
radiation safety
Storage Boxes, Waste Bins and Cabinet
Cleaver Scientific storage boxes are manufactured with hinged lids and accommodate interchangeable
inserts that hold microtubes, centrifuge tubes, scintillation vials, universals, cryotubes and falcon tubes.
Also supplied is our range of floor-standing and benchtop bins with anti-slip feet and hinged lids. These
serve as an ideal solution for short-term storage of radioactive waste or radioisotopes. Both the Beta
and Gamma storage bins are available in five sizes, while the two largest bin models have wheels for
easy transportation. Optional heavy duty drawstring bags may also be purchased.
Boxes
Ordering Information
BETA
GAMMA
Box Size
BETA
GAMMA
Box Size
CSR-B0.4
CSR-B0.4G
Mini 5.5 x 8.5 x 8.5cm
CSR-BDUO
CSR-BDUOG
Duo Box 7 x 10 x6cm
CSR-B0.8
CSR-B0.8G
Midi 6 x 16.5 x 8.5cm
CSR-BLOCK CSR-BLOCKG
CSR-B6.5
CSR-B6.5G
Maxi 14 x 28 x 16.5cm
CSR-BLOCKL CSR-BLOCKLG Cover for B4 1 x 3.5 x 14cm
CSR-B3.5
CSR-B3.5G
Box for four way racks 14 x 17.5 x 15cm
CSR-STORE CSR-STOREG
CSR-B8
CSR-B8G
Transport Box 7.5 x 29.5 x 38cm
CSR-COV
Mini Box Insert - 16 x 1.5ml tubes
CSR-R20
CSR-R50
Maxi Box Insert - 8 x 50ml Centrifuge tubes
CSR-RDUO
Midi Box Insert - 16 x 1.5 and 16 x 0.5ml tubes
CSR-R0.5
Mini Box Insert - 20 x 0.5ml tubes
CSR-R5
Maxi Box Insert - 15 x 5ml Scintillation vials
CSR-R3F
Maxi Box Insert - 3 x Falcon tubes, 8 x 1.5ml tubes
CSR-R2
Midi Box Insert - 32 x 2ml Cryotubes
CSR-R1.5L
Midi Box Insert - 32 x 1.5ml Eppendorf tubes
CSR-RU
Maxi Box Insert - 8 x Universals
CSR-R2F
Maxi Box Insert - 2 x Falcon tubes, 8 x 1.5ml tubes
CSR-R15
Maxi Box Insert - 15 x 15ml Centrifuge tubes
CSR-R0.5L
Midi Box Insert - 40 x 0.5ml Eppendorf tubes
Inserts
CSR-R1.5
CSR-COVG
Block for 4 x 1.5ml Eppendorf tubes 5 x 3.5 x 14cm
Beta-Storage/Transport Block 7 x 15 x 12cm
Carboy Cover 59 x 38 x 38cm
Maxi Box Insert - 8 x 20ml Scintillation vials
Bags
Bins
Ordering Information
BETA
GAMMA
Bin Size
BETA
GAMMA
Bin Size
CSR-B1
CSR-B1G
1L, use with bag CSR-BAG1 13 x 10 x 8cm
CSR-B5TIP
-
Large 5L, use with bag CSR-BAG2 33 x 13 x 13cm
CSR-B2TIP
CSR-B2TIPG
2L, use with bag CSR-BAG1 13 x 13x 13cm
CSR-B20
CSR-B20G
20L, use with bag CSR-BAG5 38 x 21.5 x 23.5cm
CSR-B2MCTIPCSR-B2MCTIPG 2L, use with bag CSR-BAG1 13 x 13x 13cm
CSR-B53
CSR-B53G
53L, use with bag CSR-BAG5 40 x 49 x 27cm
CSR-B3
CSR-B3G
3.3L, use with bag CSR-BAG1 15 x 15 x 15cm
CSR-B47
-
47L with Wheels, use with bag CSR-BAG6 58 x 28.5 x 27cm
CSR-B10
CSR-B10G
10L, use with bag CSR-BAG2 25 x 20 x 20cm
CSR-B122
-
122L with Wheels, use with bag CSR-BAG6 74 x 41 x 41cm
CSR-B15
CSR-B15G
15L, use with bag CSR-BAG2 29.5 x 21.5 x 23.5cm
CSR-BAG1
Drawstring Radiation Bags, pk/25 15 x 15 x 15cm
CSR-BAG5
Drawstring Radiation Bags, pk/25 40 x 49 x 27cm
CSR-BAG2
Drawstring Radiation Bags, pk/25 25 x 20 x 20cm
CSR-BAG6
Drawstring Radiation Bags, pk/25 61 x 28 x 28cm
Accessories
Other accessories available include pipette
guards, radiation tape and warning signs and
labels.
Ordering Information
BETA
GAMMA
CSR-PB2
CSR-PB2G
Pipette Shield - Biohit PS1000 Beta
CSR-LABS
Radiation Labels, pk/25 25x25mm
CSR-PB1
CSR-PB1G
Pipette Shield - Biohit PS200 Beta
CSL-LABL
Radiation Labels, pk/25 50x50mm
CSR-PB3
CSR-PB3G
Pipette Shield - Biohit PS5000 Beta
CSR-RADTAPE
Radiation Tape, pk/25 25mm x 66m
CSR-PG3
CSR-PG3G
Pipette Shield - Gilson P1000 Beta
CSR-PG1
CSR-PG1G
Pipette Shield - Gilson P20/100 Beta
CSR-PG2
CSR-PG2G
Pipette Shield - Gilson P200 Beta
51
Index
Horizontal Electrophoresis
multiSUB mini
multiSUB midi
multiSUB choice
multiSUB maxi
multiSUB screen
miniRapide & batteryGel
multiSUB midi-96
multiSUB-4
horizontal accessories
buffers, agarose, markers
package deals horizontals
comet assay tanks
clinical electrophoresis
page 6
page 7
page 8
page 9
page 10
page 11
page 12
page 13
page 14
page 15
page 16
page 18
page 19
ISO9001:2000 approved company
Vertical Electrophoresis
omniPAGE mini
omniPAGE mini wide
omniPAGE maxi
modular systems
omniPAGE 2D systems
Isoelectric focussing
DGGE page & peristaltic pumps
large format vertical
gel dryers & vacuum pumps
buffers, stains, markers
4-gel vertical electrophoresis
packages
standard vertical package deals
page 22
page 23
page 24
page 25
page 26
page 27
page 28
page 29
page 30
page 31
page 32
page 33
Blotting
omniPAGE electroblotting
tank sub electroblotters
& semi dry blotters
capillary & dot and slot blotters
membranes, buffers, stains
& pH meters
Power Supplies
Consort power supplies
omniPAC power supplies
page 34
page 35
page 36
page 37
page 38
page 39
Gel Documentation Systems
MicroDoc
page 40
UviDoc HD2
page 41
UV transilluminators, SafeCloner page 42
& UV crosslinker
General Laboratory
heaters and stirrers
& quickspin
vortex & 3D Shaker
cube dry baths
& rockers and shakers
water baths & glove boxes
hybridisation/incubators
UV sterilisation cabinets
ice buckets, coolcube
& tube racks
Protection
radiation safety
page 43
page 44
page 45
page 46
page 47
page 48
page 49
page 50
www.cleaverscientific.com
Cleaver Scientific Ltd
Rugby,
Warwickshire
United Kingdom
t | +44 (0)1788 565300
f | +44 (0)1788 552822
e | info@cleaverscientific.com
e | sales@cleaverscientific.com
w | www.cleaverscientific.com
VER01