I S e t A l e... f o r O n e ...

Set Alert
I for One Alert per Day
Lifesavingpillbox.com
HOU
R
/
Questions: (480) 648-4977
A
P
:
MIN
Setting Alert I
( D e f a u l t s
t o
s t a r t i n g
&
Press
p o i n t
a f t e r
t h r e e
down at the same time and release.
The HOUR will flash, using the
scroll to the chosen HOUR
__
The MINUTE will flash, using the
Press
( Alert
I Hour is Set )
scroll to the chosen
__
The A/P will flash, using the
Press
s e c o n d s )
( Alert
MINUTE
I Minute is Set )
scroll to AM or PM
__
( Alert
I A/P is Set )
Continue & Turn Off Alert II
Press
&
down at the same time and release.
The HOUR will flash, using the
scroll to OFF …release
( Alert
II is turned Off )
KE E P OU T OF R E AC H OF C H ILD R EN
The MED-Q is intended to serve as a back-up reminder system to help remind you to take your pills. It is not intended to be the sole
source for you to remember to take your pills. The MED-Q requires you to properly set and activate it. It is Battery powered and when the
battery runs out it will cease to function. Like any electronic device, it can cease to function for a variety of reasons, including but not
Limited to exposure to moisture or to excessive hot or cold temperatures. You agree that the limit of liability to you arising from any claim
involving the use or malfunction of a MED-Q shall be the purchase price that you paid for the MED-Q. By activating the MED-Q you agree
to these terms and conditions. If these Terms and conditions are not agreeable to you; you may return the MED-Q and your original
Receipt and receive a full refund of our purchase price
P a t e n t
P e n d i n g
D e s i g n
SETTING TIME & DAY
L i f e s a v i n g p i l l b o x . c o m
/
Q u e s t i o n s :
( 4 8 0 )
6 4 8 - 4 9 7 7
SUN MON TUE WED THU FRI
HOU
R
( D e f a u l t s
t o
A
P
:
MIN
s t a r t i n g
p o i n t
a f t e r
t h r e e
s e c o n d s )
SETTING TIME & DAY
Hold
down and press
The HOUR will flash, using the
3 Times and release.
scroll to the chosen HOUR
( Hour is Set )
The MINUTE will flash, using the
Chosen MINUTE …release
Press
scroll to the
( Minute is Set )
The A or P will flash, using the
Press
scroll to A or P
( AM/PM is Set )
Press
The
SUN MON TUE WED THU FRI SAT
will flash using the
scroll
to the chosen DAY…release
( DAY is Set )
I & II f o r T w o A l e r t s p e r D a y
Set Alert
Lifesavingpillbox.com
( D e f a u l t s
/
HOUR
:
Alert I
Alert II
t o
MIN
s t a r t i n g
Questions: (480) 648-4977
A
P
p o i n t
a f t e r
t h r e e
s e c o n d s )
Setting Alert I
Hold
&
down at the same time and release:
The HOUR will flash, using the
scroll to the chosen HOUR
( Alert
The MINUTE will flash, using the
Press
scroll to the chosen
The A/P will flash, using the
MINUTE
I Minute is Set )
( Alert
Press
I Hour is Set )
scroll to AM or PM
( Alert
I A/P is Set )
Continue for Setting Alert II
Hold
&
down at the same time and release:
The HOUR will flash, using the
scroll to the chosen HOUR
( Alert
Press
The MINUTE will flash, using the
scroll to the chosen MINUTE
( Alert
Press
The A/P will flash, using the
II Hour is Set )
II
Minute is Set )
scroll to A or P …release
( Alert
II A/P is Set )
O P E R AT I O N T I P S
LIFESAVINGPILLBOX.COM /
Questions: (480) 648-4977
Alarm will default in three seconds to original setting
Go To the Next Alert
When your Alarm is Beeping/Flashing here’s what you do:
Press the Next Alert Button on the left side of the control panel.
The Alarm will stop beeping immediately and your
Next Alert has been activated.
LED Light will continue to flash for an additional 10 seconds so you know which pills to take and then will stop
flashing until your next alert.
Repeat every time your alarms are sounding/flashing
Remove or Replace Daily Boxes
REMOVE:
Lift box from the back side and tilt up and then lift up to remove
REPLACE:
Angle front end of box into base unit and then push back side of box down into place.
___________________________________________________________________
Once a Day
Front row is for week 1 and back row is for week 2
Twice A Day
The row facing front is alarm “1”, for the first alert of the day.
The row facing back is alarm “2” and is for the second alert of the day
When Setting Times
The LCD Digits will continue to flash/set in 3-5 seconds after completing or not pressing any buttons. If no
buttons are pressed unit will go back to original default
Alarm Sounds as Follows:
5 MINUTE CYCLE THAT REPEATS EVERY 25 MINUTES
MINUTES 1 & 2
50% VOLUME
MINUTES 3 & 4
80% VOLUME
MINUTE
5
100% VOLUME
We recommend that you
Go To MEDQPILLBOX.com
And View Complete video
Set-up and Programming directions.
This makes initial set up a “Snap”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising