Camera User Guide
The serial number of this product
is given on the bottom face of the
camera.
Basic Operations
If you are using the camera for the first time, read this section.
This section provides a basic overview of how to turn on the camera, take
pictures and play back pictures.
Advanced Operations
Read this section when you want to learn more about the different camera
functions.
This section provides more detailed information about the functions used to
take pictures and play back pictures, as well as information on how to customize
the camera settings, print pictures, and use the camera with a computer.
The rechargeable battery needs to be charged before use. The battery is not
charged at the time of purchase.
Preface
This manual provides information on how to use the shooting and playback
functions of this product, as well as warnings on its use.
To make the best use of this product’s functions, read this manual
thoroughly before use. Please keep this manual handy for ease of reference.
Ricoh Co., Ltd.
Safety Precautions
Read all safety precautions thoroughly to ensure safe use.
Test Shooting
Please be sure to do some test shooting to make sure it is recording properly
before normal use.
Copyright
Reproduction or alteration of copyrighted documents, magazines, music and
other materials, other than for personal, home or similarly limited purposes,
without the consent of the copyright holder is prohibited.
Exemption from Liability
Ricoh Co., Ltd. assumes no liability for failure to record or play back images caused
by malfunction of this product.
Warranty
This product is manufactured to local specifications and the warranty is valid
within the country of purchase. Should the product fail or malfunction while you
are abroad, the manufacturer assumes no responsibility for servicing the product
locally or bearing the expenditure incurred thereof.
Radio Interference
Operating this product in the vicinity of other electronic equipment may
adversely affect the performance of both devices. In particular, operating the
camera close to a radio or television may lead to interference. If interference
occurs, follow the procedures below.
• Move the camera as far away as possible from the TV, radio or other device.
• Reorient the TV or radio antenna.
• Plug the devices into separate electrical outlets.
© 2011 RICOH CO., LTD. All rights reserved. This publication may not be reproduced in whole or in part
without Ricoh’s express written permission. Ricoh reserves the right to change the contents of this
document at any time without prior notice.
Every effort has been made to ensure the accuracy of the information in this document. Should you
nevertheless notice any errors or omissions, we would be grateful if you would notify us at the address
listed on the back cover of this booklet.
Microsoft, Windows, Windows Vista®, Windows 7™, and Internet Explorer are registered trademarks of
Microsoft Corporation in the United States of America and other countries. Macintosh and Mac OS are
registered trademarks of Apple Inc. in the United States of America and other countries. Adobe, the Adobe
logo, and Adobe Reader are trademarks of Adobe Systems Incorporated in the United States and other
countries. MediaBrowser™ is a trademark of Pixela Corporation.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Eye-Fi, the Eye-Fi logo and Eye-Fi connected are trademarks of Eye-Fi, Inc.
PhotoSolid® is registered trademark of Morpho, Inc.
All other trade names mentioned in this document are the property of their respective owners.
1
Safety Precautions
Warning Symbols
Various symbols are used throughout this instruction manual and on the
product to prevent physical harm to you or other people and damage to
property. The symbols and their meanings are explained below.
Danger
Warning
Caution
This symbol indicates matters that may lead to imminent risk of death or
serious injury if ignored or incorrectly handled.
This symbol indicates matters that may lead to death or serious injury if
ignored or incorrectly handled.
This symbol indicates matters that may lead to injury or physical damage if
ignored or incorrectly handled.
Sample Warnings
The
symbol alerts you to actions that must be performed.
The symbol alerts you to prohibited actions.
The symbol may be combined with other symbols to indicate that a specific
action is prohibited.
● Examples
Do not touch
Do not disassemble
Observe the following precautions to ensure safe use of this equipment.
Danger
● Do not attempt to disassemble, repair or alter the equipment yourself. The high-
voltage circuitry in the equipment poses significant electrical hazard.
● Do not attempt to disassemble, alter or directly solder the battery.
● Do not put the battery in a fire, attempt to heat it, use it in a high temperature
environment such as next to a fire or inside a car, or abandon it. Do not put it into
water or the sea or allow it to get wet.
● Do not attempt to pierce, hit, compress, drop, or subject the battery to any other
severe impact or force.
● Do not use a battery that is significantly damaged or deformed.
2
Warning
● Turn off the power immediately in the event of abnormalities such as smoke
or unusual odors being emitted. Remove the battery as soon as possible,
being careful to avoid electric shocks or burns. If you are drawing power from a
household electrical outlet, be sure to unplug the power cord from the outlet to
avoid fire or electrical hazards. Discontinue use of the equipment immediately if it
is malfunctioning. Contact the nearest service center at your earliest convenience.
● Turn off the power immediately if any metallic object, water, liquid or other
foreign object gets into the camera. Remove the battery and memory card
as soon as possible, being careful to avoid electric shocks or burns. If you are
drawing power from a household electrical outlet, be sure to unplug the power
cord from the outlet to avoid fire or electrical hazards. Discontinue use of the
equipment immediately if it is malfunctioning. Contact the nearest service center
at your earliest convenience.
● Avoid any contact with the liquid crystal inside the picture display, should the
monitor be damaged. Follow the appropriate emergency measures below.
• SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the
affected area thoroughly with water, then wash well with soap.
• EYES: If it gets in your eyes, wash your eyes with clean water for at least 15
minutes and seek medical advice immediately.
• INGESTION: If any of the liquid crystal is ingested, rinse the mouth out thoroughly
with water. Have the person drink a large amount of water and induce vomiting.
Seek medical assistance immediately.
● Follow these precautions to prevent the battery from leaking, overheating,
igniting or exploding.
• Do not use a battery other than those specifically recommended for the
equipment.
• Do not carry or store together with metal objects such as ballpoint pens,
necklaces, coins, hairpins, etc.
• Do not put the battery into a microwave or high pressure container.
• If leakage of battery fluid or a strange odor, color change, etc. is noticed during
use or during charging, remove the battery from the camera or battery charger
immediately and keep it away from fire.
● Please observe the following in order to prevent fire, electrical shock or cracking
of the battery while charging.
• Use only the indicated power supply voltage. Also avoid the use of multi-socket
adapters and extension cords.
• Do not damage, bundle or alter power cords. Also, do not place heavy objects on,
stretch or bend power cords.
• Do not connect or disconnect the power plug with wet hands. Always grip the
plug section when disconnecting a power cord.
• Do not cover equipment while charging.
● Keep the battery and SD memory card used in this equipment out of the reach
of children to prevent accidental ingestion. Consumption is harmful to human
beings. If swallowed, seek medical assistance immediately.
3
● Keep the equipment out of the reach of children.
● Do not touch the internal components of the equipment if they become
exposed as a result of being dropped or damaged. The high-voltage circuitry in
the equipment could lead to an electric shock. Remove the battery as soon as
possible, being careful to avoid electric shocks or burns. Take the equipment to
your nearest dealer or service center if it is damaged.
● Do not use the equipment in wet areas as this could result in fire or electric
shock.
● Do not use the equipment near flammable gases, gasoline, benzene, thinner or
similar substances to avoid the risk of explosion, fire or burns.
● Do not use the equipment in locations where usage is restricted or prohibited as
this may lead to disasters or accidents.
● Wipe off any dust that accumulates on the electrical plug as this may lead to fire.
● Use only the specified AC adapter in household electrical outlets. Other adapters
pose the risk of fire, electric shock or injury.
● To avoid the risk of fire, electric shock or injury, do not use the battery charger or
AC adapter with commercially available electronic transformers when traveling
abroad.
Observe the following precautions to ensure safe use of this unit.
Caution
● Contact with fluid leaking from a battery can lead to burns. If part of your body
comes in contact with a damaged battery, rinse the area with water immediately.
(Do not use soap.)
If a battery starts to leak, remove it immediately from the equipment and wipe
the battery chamber thoroughly before replacing it with a new battery.
● Plug the power cords securely into the electrical outlets. Loose cords pose a fire
hazard.
● Do not allow the camera to get wet. In addition, do not operate it with wet
hands. Both pose the risk of electric shock.
● Do not fire the flash at drivers of vehicles, as this may cause the driver to lose
control and result in a traffic accident.
Safety Precautions
for Accessories
4
When using optional products, carefully read the instructions provided
with the product before using that product.
Using the Manuals
The following two manuals are included with your CX5.
“Camera User Guide” (This booklet)
This guide explains the usage and functions of the camera. It
also explains how to install the camera’s built-in software on
your computer.
“Software User Guide” (PDF file)
This guide explains how to download images from the
camera to your computer.
The “Software User Guide” is available in the [MANUAL] folder
in the internal memory of the camera.
Each language has its own
“Software User Guide”.
To copy the User Guide onto your computer, connect the
camera to the computer using the supplied USB cable. See
P.123 for more information.
“MediaBrowser” image viewing and editing software (for Windows only) is
also included in the internal memory of the camera. You can download the
information on how to use MediaBrowser from the displayed “Help”. For
more information on MediaBrowser, contact the Customer Support Center
below.
North America (U.S.)
Europe
UK, Germany, France and Spain:
Other Countries:
Asia
China
TEL: (Toll Free) +1-800-458-4029
TEL: (Toll Free) +800-1532-4865
TEL: +44-1489-564-764
TEL: +63-2-438-0090
TEL: +86-21-5385-3786
Business hours: 9:00 AM to 5:00 PM
5
Quick Q & A Index
5: See these pages for information on camera settings
: See these pages for explanations of camera features
First Steps
How do I set the clock?
Setting the clock 5 P.28, 109;
P.114
How do I format internal memory or
a memory card?
Formatting
How do I charge the battery?
Charging the battery
5 P.24, 109;
P.110
P.26
5 Taking Photographs
“Point-and-Shoot” Photography
Can the camera choose settings
automatically?
Can the camera automatically identify the
scene?
5
Auto shooting mode
P.30
5
Scene auto mode
P.38
Can the camera match settings to the scene?
Scene mode
5 P.62;
P.59
Preventing Blur
Can focus track moving subjects?
Subject tracking AF 5 P.78;
How do I prevent blur caused by camera shake?
P.80, 86
Can focus respond to subject movement?
Pre-AF
5 P.78;
Camera Shake Correction 5 P.78;
P.84
How do I prevent blur at slow shutter speeds?
5 P.78;
P.80
ISO setting
P.84, 92
P.34
Can I take shots that look like pictures of
miniatures?
Creative Photography
How do I shoot close-ups?
5
Macro mode
Miniaturize
Dynamic range double shot
5 P.69;
Can I take high-contrast photos in black
and white?
P.68, 70
High contrast B&W
How do I create a soft focus effect?
Soft focus
5 P.69;
P.68
Can I take shots that look like photos taken
with a toy camera?
6
5 P.69;
How do I shoot high-contrast scenes?
Toy camera
5 P.69;
P.68
P.68, 71
5 P.69;
P.68
How do I make creative use of color?
Cross process
5 P.69;
P.68
Advanced Settings
How do I take photos at different sizes?
5 P.78;
Picture quality/size
How do I adjust exposure?
P.79
Exposure compensation
5 P.78;
P.81
How do I compensate for colored light sources?
How do I take monochrome photos?
5 P.78;
Image settings
White balance
How do I reduce image noise?
5 P.78;
Noise reduction
P.82
Date imprint
5 P.78;
5 P.78;
P.84
5
P.73
P.84, 91
Can I take several photos in one burst?
Continuous mode
How do I stamp the date on photos?
P.84, 90
5 P.65;
P.64
5
P.74
3 Movies
How do I shoot movies?
How do I view movies?
Movie mode
Viewing movies
6 Playback
Can I create resized copies of photos?
Resize
5 P.93;
Can I protect images from accidental deletion?
P.94
How do I delete unwanted photos?
5 P.93, 104;
P.95
Can I view my pictures on a TV?
5
P.42
5 P.93;
P.95
Deleting files
Protect
Viewing pictures on TV
P.107
How do I view slide shows?
Slide shows
Miscellaneous
How do I keep the flash from firing?
Using the flash
5
Can I copy my pictures to a computer?
P.35
How do I keep the beep from sounding?
Volume settings
5 P.109;
P.111
Downloading images
P.123
Can I print images without a computer?
Direct printing
P.118
7
Contents
Safety Precautions ................................................................................................ 2
Using the Manuals ................................................................................................ 5
Quick Q & A Index .................................................................................................. 6
Contents ................................................................................................................... 8
Basic Operations
13
Packing List ...........................................................................................................14
Optional Accessories ................................................................................................................. 14
Dial and Button Operation ..............................................................................15
How to Use the Mode Dial .................................................................................................... 15
How to Use the ADJ./OK Button ........................................................................................ 16
Names of Parts .....................................................................................................17
Picture Display .....................................................................................................19
Getting Ready ......................................................................................................23
About the Battery ........................................................................................................................ 23
About the SD Memory Card (available in stores) .................................................... 24
Charging the Rechargeable Battery................................................................................. 26
Loading the Rechargeable Battery and SD Memory Card................................. 27
Turning the Power On/Off ..................................................................................................... 28
Setting the Language, Date and Time ........................................................................... 28
Basic Shooting .....................................................................................................30
Shooting in Auto Shooting Mode (Focus and Shoot) .......................................... 30
Using the Zoom Function ...................................................................................................... 33
Shooting Close-Ups (Macro Shooting) .......................................................................... 34
Using the Flash.............................................................................................................................. 35
Using the Self-timer ................................................................................................................... 37
Shooting in Scene Auto Mode............................................................................................ 38
Playing Back Images ..........................................................................................39
Viewing Your Images ................................................................................................................. 39
Thumbnail View............................................................................................................................ 39
Enlarging Images ......................................................................................................................... 41
Deleting Files ........................................................................................................42
Deleting a File or All Files ........................................................................................................ 42
Deleting Multiple Files.............................................................................................................. 43
Changing the Display with the DISP. Button .............................................45
About the Electronic Level .................................................................................................... 48
About the Histogram Display .............................................................................................. 50
8
Advanced Operations
1 ADJ. Button Functions
51
52
Selecting Shooting Menu Options Assigned to the ADJ./OK Button ......... 52
Shifting the AE and AF Targets ............................................................................................ 53
2 Using the Fn (Function) Button
55
Assigning a Role to the Fn Button ................................................................56
Shifting the AF Target for Macro Shooting .................................................................. 56
Locking the Exposure ............................................................................................................... 57
Choosing a Focus Setting ...................................................................................................... 58
3 Shooting Mode Types
59
Scene Mode (W) ..........................................................................................59
Selecting a Scene Mode ......................................................................................................... 62
Using Skew Correction Mode .............................................................................................. 63
Continuous Mode (R) .....................................................................................64
Taking Pictures in Continuous Mode .............................................................................. 65
M-Cont Plus (10M) ...................................................................................................................... 66
M-Cont Plus (2M) ......................................................................................................................... 67
Speed Cont (Low)/Speed Cont (High) ........................................................................... 67
Creative Shooting Mode (X) .........................................................................68
Taking Pictures in Creative Shooting Mode ................................................................ 69
Dynamic Range Double Shot .............................................................................................. 70
Shooting in Miniaturization Mode ................................................................................... 71
Plus Normal Shooting............................................................................................................... 72
Movie Mode (3) ................................................................................................73
Shooting Movies .......................................................................................................................... 73
4 Playback Functions
74
Playing Back Movies...........................................................................................74
Playing Back MP Files.........................................................................................74
Exporting MP Files ...................................................................................................................... 76
5 Shooting Menu
78
Using the Menu ...................................................................................................78
Shooting Menu Options ...................................................................................79
Dynamic Range Expansion.............................................................................................. 79
Soft Focus Options................................................................................................................ 79
Hue ................................................................................................................................................. 79
Vignetting ................................................................................................................................... 79
Toy Color ..................................................................................................................................... 79
Plus Normal Shooting ......................................................................................................... 79
Picture Quality/Size .............................................................................................................. 79
Movie Size .................................................................................................................................. 80
9
Density ......................................................................................................................................... 80
Size .................................................................................................................................................. 80
Focus.............................................................................................................................................. 80
Pre-AF ............................................................................................................................................ 80
Exposure Metering................................................................................................................ 81
Image Settings ........................................................................................................................ 81
Super Resolution .................................................................................................................... 82
Noise Reduction ..................................................................................................................... 82
Flash Exposure Compensation ...................................................................................... 82
Auto Bracket.............................................................................................................................. 82
Time Exposure ......................................................................................................................... 82
Custom Self-Timer ................................................................................................................. 83
Interval Shooting ................................................................................................................... 83
Camera Shake Correction ................................................................................................. 84
Slow Shutter Limit ................................................................................................................. 84
Date Imprint.............................................................................................................................. 84
Exposure Compensation................................................................................................... 84
White Balance .......................................................................................................................... 84
ISO Setting ................................................................................................................................. 84
Maximum ISO for ISO Auto.............................................................................................. 85
Restore Defaults...................................................................................................................... 85
Focus ................................................................................................................................................... 86
Subject Tracking AF .............................................................................................................. 86
Multi-Target AF ........................................................................................................................ 86
Manual Focus (MF)................................................................................................................ 87
Auto Bracketing ............................................................................................................................ 88
Auto Bracket.............................................................................................................................. 88
White Balance Bracketing (WB-BKT).......................................................................... 88
Color Bracketing (CL-BKT) ................................................................................................ 89
Focus Bracketing (FOCUS-BKT) ..................................................................................... 89
Exposure Compensation ........................................................................................................ 90
White Balance ................................................................................................................................ 91
Manual.......................................................................................................................................... 92
ISO Setting ....................................................................................................................................... 92
6 Playback Menu
93
Using the Menu ...................................................................................................93
Playback Menu Options....................................................................................94
10
Flag Function Setting .......................................................................................................... 94
Flag Function Display .......................................................................................................... 94
Export Still Images................................................................................................................. 94
Resize............................................................................................................................................. 94
Trim................................................................................................................................................. 94
Level Compensation ............................................................................................................ 94
White Balance Compensation ....................................................................................... 94
Skew Correction ..................................................................................................................... 94
Change Grid Point ................................................................................................................. 94
Protect .......................................................................................................................................... 95
Slide Show.................................................................................................................................. 95
Copy to Card from Internal Memory ......................................................................... 95
DPOF.............................................................................................................................................. 95
Recover File................................................................................................................................ 95
Flag Function Setting ................................................................................................................ 96
Setting/Canceling One File at a Time........................................................................ 96
Setting/Canceling Multiple Files at One Time ..................................................... 96
Trim ...................................................................................................................................................... 97
Level Compensation............................................................................................................... 100
Correcting Images Automatically ............................................................................. 100
Correcting Images Manually........................................................................................ 100
White Balance Compensation .......................................................................................... 102
Skew Correction ........................................................................................................................ 103
Protect ............................................................................................................................................. 104
DPOF ................................................................................................................................................ 106
Viewing Pictures on TV .................................................................................. 107
7 Setup Menu
109
Using the Menu ................................................................................................ 109
Setup Menu Options....................................................................................... 110
Format [Card]......................................................................................................................... 110
Format [Internal Memory] ............................................................................................. 110
LCD Brightness ..................................................................................................................... 110
Reg. My Settings .................................................................................................................. 110
Step Zoom .............................................................................................................................. 110
Set Fn Button ......................................................................................................................... 110
ADJ Button Setting 1–4 .................................................................................................. 111
AF Auxiliary Light ................................................................................................................ 111
Operation Sounds .............................................................................................................. 111
Volume Settings .................................................................................................................. 111
LCD Confirmation Time................................................................................................... 111
Auto Power Off ..................................................................................................................... 111
LCD Auto Dim ....................................................................................................................... 112
Digital Zoom Image .......................................................................................................... 112
Level Setting .......................................................................................................................... 112
Grid Guide Display Options .......................................................................................... 112
Function Guide .................................................................................................................... 112
Shooting Info. Display Frame ...................................................................................... 112
Minimum Distance ............................................................................................................ 113
Auto Rotate ............................................................................................................................ 113
White Saturation Display................................................................................................ 113
Card Sequence No. ............................................................................................................ 113
11
USB Connection Type ...................................................................................................... 113
Date Settings ......................................................................................................................... 114
Language/N*1 .............................................................................................................. 114
Video Out Mode*1.............................................................................................................. 114
HDMI Output ......................................................................................................................... 114
Sleep Mode ............................................................................................................................ 114
Confirm Firmware Version ............................................................................................. 114
Eye-Fi Connection Settings*2 ...................................................................................... 114
Eye-Fi Connection Display*2 ........................................................................................ 114
Reg. My Settings........................................................................................................................ 115
Digital Zoom Image ................................................................................................................ 117
8 Direct Printing
118
About the Direct Print Function ................................................................. 118
Connecting the Camera to a Printer ......................................................... 118
Printing Still Images ........................................................................................ 119
Printing One or All Still Images ........................................................................................ 119
Printing Several Still Images............................................................................................... 122
9 Downloading Images to Your Computer
123
For Windows ...................................................................................................... 123
System Requirements for Using the Built-in Software ...................................... 123
Installing Software ................................................................................................................... 124
Copying Pictures to Your Computer ............................................................................. 128
For Macintosh.................................................................................................... 130
System Requirements for Using the Built-in Software ...................................... 130
Copying Pictures to Your Computer ............................................................................. 131
Using the MP File Viewer ..................................................................................................... 132
Installing Software ................................................................................................................... 132
10 Appendices
134
Troubleshooting ............................................................................................... 134
Error Messages ........................................................................................................................... 134
Camera Troubleshooting ..................................................................................................... 135
12
Available Settings ............................................................................................ 140
Specifications .................................................................................................... 144
Number of Images That Can Be Stored .................................................... 147
Defaults Settings/Functions Whose Defaults Are Restored
When the Camera Is Turned Off ............................................................. 149
Using Your Camera Abroad .......................................................................... 151
Cautions on Use................................................................................................ 151
Care and Storage.............................................................................................. 153
Warranty and Servicing ................................................................................. 154
Index ..................................................................................................................... 156
Basic
Operations
If you are using the camera
for the first time, read this
section.
Packing List ..........................................14
Dial and Button Operation ..................15
Names of Parts .....................................17
Picture Display .....................................19
Getting Ready ......................................23
Basic Shooting .....................................30
Playing Back Images ............................39
Deleting Files .......................................42
Changing the Display with the DISP.
Button ............................................45
Packing List
Open the package and make sure all the items are included.
* The actual appearance of items included may differ.
If you are using the camera for the first time, read this section.
• CX5
• Rechargeable Battery
The serial number of the camera
is provided on the bottom face of
the camera.
• Battery Charger
• USB Cable
• AV Cable
• Handstrap
• Warranty
• Camera User Guide
Optional Accessories
• Soft Case (SC-90)
Used to store your camera.
• Rechargeable Battery
(DB-100)
• Battery Charger (BJ-10)
• HDMI Cable (HC-1)
Used to connect your camera to a
television compatible with HDMI.
• Neck Strap (ST-2)
A double-loop neck strap with
embroidered RICOH logo.
Note ------------------------------------------------------------------------------------Attaching the Handstrap/Neck Strap to the Camera
Thread the small end of the strap through
the strap eyelet on the camera and loop
the ends. Remove the end of the neck
strap from the buckle and attach it as
shown in the illustration.
• For the latest information on optional
accessories, see the Ricoh website (http://www.ricohpmmc.com/).
14
Dial and Button Operation
How to Use the Mode Dial
Mode Dial Symbols and Descriptions
Symbol
Function
Description
Auto Shooting Mode Automatically sets the optimal
aperture value and shutter speed
5
depending on the subject.
My Settings Mode
You can shoot using the settings
T, U
registered in [Reg. My Settings].
Movie Mode
Allows you to shoot movies.
3
R
X
W
Continuous Mode
Creative Shooting
Mode
Scene Mode
Scene Auto Mode
S
Refer to
P.30
P.115
P.73
You can shoot with various
continuous shooting functions.
Shoot with a variety of effects.
P.64
Allows you to shoot with settings
optimized for the shooting scene.
The camera automatically selects
the optimal scene mode for simple
point-and-shoot photography.
P.59
P.68
If you are using the camera for the first time, read this section.
Set the mode dial to the desired mode
before shooting still images or movies.
P.38
15
How to Use the ADJ./OK Button
• To select or enter the selection, use the ADJ./OK button !"NF.
• Instructions in this manual to “Push the ADJ./OK
If you are using the camera for the first time, read this section.
16
button !"NF” indicate that you should press
the ADJ./OK button in the up, down, left or
right direction.
• Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on
the button.
Example: Pushing the
ADJ./OK button !
Names of Parts
Camera
Front View
5
7
8
9
10
Item Name
1
Mode Dial
2
3
4
5
6
Shutter Release Button
Microphone
POWER Button
Lens Cover
Zoom Lever z (Telephoto)/Z (Wide-angle)
8 (Enlarged View)/9 (Thumbnail View)
Flash
AF Window
AF Auxiliary Light/Self-Timer Lamp
Lens
7
8
9
10
Refer to
P.15, 30, 38, 62, 65, 68,
69, 73
P.30
P.73
P.28
—
P.33, 39, 41
If you are using the camera for the first time, read this section.
1 2 34
6
P.35
—
P.37, 111
—
17
Rear View
7
2
1
If you are using the camera for the first time, read this section.
18
9
2
3 4
5
6
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
8
10
11
12
13
14
16 17
Item Name
Picture Display
Strap Eyelet
Terminal Cover
Speaker
Common Terminal for USB Port/AV Output
HDMI Micro Output Terminal (Type D)
N (Macro)
ADJ./OK Button
F (Flash)
6 (Playback) Button
MENU Button
Fn (Function) Button
t (Self-timer)/D (Delete) Button
DISP. Button
Power (DC input) Cable Cover
Battery/Card Cover
Tripod Screw Hole
Refer to
P.19
P.14
P.107, 114, 128, 131
P.74
P.107, 114, 128, 131
P.107
P.34
P.52
P.35
P.39
P.62, 65, 69, 78, 93, 109
P.55
P.37, 42
P.41, 45, 48
—
P.27
P.146
Picture Display
Example of Picture Display when Shooting Pictures
Still Image Mode
1
22
23
24
25
26
2
34 5
+0.3
Interval
SR DZ
4:3
4: F
4
21
28
1cm-
6 7 8 9 10
1 Sec
X103
35
27
34
F3.5 1/1000
29
30
EV +0.7
31
Item Name
1 Flash Mode
2 Flash Exposure Compensation
3 Plus Normal Shooting/
Multi-Target AF Focus Mark
4 Scene Mode/Continuous
Mode/Creative Shooting Mode
5 Shooting Mode Types
6 Remaining Number of Still
Images
7 Recording Destination
8 AE Lock
9 Image Size
10 Picture Quality
11 Focus Mode
12 White Balance
13 Exposure Metering
ISO 100
11
12
13
14
15
37
38
16
17
18
19
20
32 33
Refer to
Item Name
P.35
14 Image Settings
P.82
15 Auto Bracket
P.72, 86 16 Histogram
17 Noise Reduction
P.59,
18 Date Imprint
64, 68 19 Camera Shake Correction
P.15
20 Battery Symbol
P.148
21 Time Exposure
22 Self-timer
P.24
23 Macro Shooting
P.57
24 Minimum Shooting
Distance
P.79
P.79
25 Super Resolution Zoom/
Digital Zoom
P.80
P.91
26 Zoom Magnification/Auto
Resize Zoom
P.81
Refer to
P.81
P.88
P.50
P.82
P.84
P.84
P.22
P.82
P.37
P.34
P.113
If you are using the camera for the first time, read this section.
36
P.33, 34
P.35,
117
19
If you are using the camera for the first time, read this section.
20
27
28
29
30
31
32
Item Name
Zoom Bar
Interval Shooting
Aperture
Shutter Speed
Exposure Compensation
ISO Setting
Refer to
P.33
P.83
P.144
P.84
P.90
P.92
33
34
35
36
37
38
Item Name
Eye-Fi Connection
Level Indicator
AF Frame
S-AUTO
Exposure Warning Indicator
Camera Shake Warning Symbol
Refer to
P.114
P.49
P.30
P.38
P.90
P.32, 84
Movie Mode
39
40
00:00 /00:02
41
REC
640
Shutter button: Start
Item Name
Refer to
Item Name
39 Recording Time
P.148
41 Movie Recording Indicator
40 Remaining Recording Time P.148
Refer to
P.73
Note ------------------------------------------------------------------------------------When the number of remaining shots is 10,000 or more, “9999” is displayed.
Example of Picture Display During Playback
Still Image Mode
1
2 3
Movie Mode
4 5 6 7 8 9
10 11
05 :12
05:12
Start
2011/01/01 00:00
ijıIJIJİıIJİıIJġııĻıı
12
13
14
15 16
Item Name
File Number
Number of Playback Files
Total Number of Files
Eye-Fi Transferred Images
Mode Types
Flag Function Setting
Protect
DPOF
Playback Data Source
Image Size
Refer to
—
—
—
P.114
—
P.96
P.104
P.106
P.24
P.79
Item Name
Picture Quality
Date at Shooting
Aperture
Shutter Speed
Eye-Fi Connection
Battery Symbol
Recording Time or Lapsed
Time
18 Indicator
11
12
13
14
15
16
17
Refer to
P.79
P.29
P.144
P.84
P.114
P.22
—
—
Note ------------------------------------------------------------------------------------• The picture display may display messages to inform you of operational
instructions or the camera’s status while in use.
• Additional information can be viewed by pressing the DISP. button. (GP.45)
1
4
7
2
3
5
6
100-0273 10/20
AUTO
F 3.5 1/60 ISO 100
8 10
EV +0.7
9
11
13
15
28 mm
Blue
If you are using the camera for the first time, read this section.
17
18
1
2
3
4
5
6
7
8
9
10
640
RMOV0001 10/20
ĵĻ Ň
ĵĻĴ
12
14
C:+0,S:+0,D:+0
ĵĻ Ň
ĵĻĴ
AUTO
F 3.5 1/60 ISO 100
EV +0.7
28 mm
Blue
C:+0,S:+0,D:+0
2011/01/01 00:00
MAX
16
• When you change the color for [Cooking] option in scene mode, the color
information (“R:X” or “B:X”) is displayed on the right of the [White Balance] icon
(shown as “9” on the above).
21
Item Name
1 Shooting Mode
2 Plus Normal Shooting
3 Dynamic Range Expansion/
Soft Focus Options/Hue/
Vignetting/Toy Color
If you are using the camera for the first time, read this section.
4
5
6
7
Aperture
Shutter Speed
ISO Setting
Exposure Compensation
Refer to
Item Name
—
8 Exposure Metering
P.72
9 White Balance
P.70, 79 10 Flash Mode
11 Focal Length of the Zoom
12 Macro Shooting
P.144
13 Focus Mode
P.84
14 Auto Bracket
P.92
15 Image Settings
P.90
16 Noise Reduction
Refer to
P.81
P.91
P.35
P.33
P.34
P.80
P.88
P.81
P.81
• When using Eye-Fi cards (GP.24), connection status will be displayed on the
picture display during shooting or playback.
Symbol
Status
Not connected
Connecting
Waiting for data transfer
Transferring
Connection stopped
Transferred images
Eye-Fi card information acquisition error
• Turn the camera back on. If the issues still persist, there may be
something wrong with the card.
Battery Level Indication
A battery symbol appears at the lower right of the picture display to
indicate the battery level. Recharge the battery before it is depleted.
Battery Symbol
22
Green
Description
Battery is sufficiently charged.
Green
Battery partially discharged. Recharging is recommended.
Orange
Battery level is low. Recharge the battery.
Getting Ready
Turn the power on and get ready to shoot.
Note -------------------------------------------------------------------------------------
About the Battery
This camera uses the rechargeable battery DB-100, a dedicated
lithium-ion battery supplied with the camera. The rechargeable
battery needs to be charged before use. The battery is not charged at
the time of purchase.
Number of shots you can take ---------------------------------------------------Approximate number of shots you can take on a single charge: Approx. 280
• Based on CIPA standard. (Temperature: 23 degrees Celsius, picture display on,
30 seconds between shots, changing the zoom setting from telephoto to wideangle or wide-angle to telephoto for each shot, 50% flash usage, turning the
power off after each 10 shots)
• Set the camera to synchro-monitor mode (GP.45) or sleep mode (GP.114)
to increase the number of shots you can take.
• The number of shots is for reference only. If the camera is used for long periods
of time for setting and playback, the shooting time (the number of shots)
will decrease. If you intend to use the camera for a long period of time, we
recommend carrying a spare battery.
Caution ---------------------------------------------------------------------------------
If you are using the camera for the first time, read this section.
• Be sure the camera is off before removing the battery.
• For information on how to turn the camera off, see P.28.
• The battery may become very hot immediately after operation. Turn the camera
off and leave it to cool down sufficiently before removing the battery.
• Please remove the battery if you are not going to use the camera for a long
period of time.
• When using a lithium-ion battery, use only the specified rechargeable lithiumion battery (DB-100). Do not use any other battery.
• Batteries should be disposed of under rules appointed by the government or
the local authorities.
23
About the SD Memory Card (available in stores)
Pictures can be stored in the camera’s 40 MB internal memory or on
SD or SDHC memory cards (hereafter referred to as “memory cards”)
available separately from third-party suppliers.
About Formatting -------------------------------------------------------------------
If you are using the camera for the first time, read this section.
24
Before using a memory card for the first time or after using a memory card
in other devices, be sure to format it with this camera. Memory cards can
be formatted using the [Format [Card]] item (GP.110) in the setup menu
(GP.109).
Where images are recorded ------------------------------------------------------When no SD memory card is loaded, the camera records images to the internal
memory (t); when an SD memory card is loaded, it records images to the SD
memory card (u).
Where images are played back from -------------------------------------------When no SD memory card is loaded, the camera plays back from the internal
memory (t). When an SD memory card is loaded, it plays back from the SD
memory card (u).
SDXC Memory Cards----------------------------------------------------------------SDXC memory cards can not be used.
Eye-Fi Cards --------------------------------------------------------------------------Eye-Fi X2 series cards (SD memory cards with built-in wireless LAN function) can
be used. For more information on Eye-Fi cards, access the Web page of Eye-Fi
(http://www.eye.fi/).
Caution ---------------------------------------------------------------------------------
Write-protecting your images ---------------------------------------------------Move the write-protection switch on the SD memory card
to LOCK to prevent your still images from being accidentally
erased or the card from being formatted.
Note that you cannot shoot images on a locked card because
no data can be recorded to the card. Unlock the card before
shooting.
Note ------------------------------------------------------------------------------------• The [Copy to Card from Internal Memory] item (GP.95) in the playback menu
(GP.93) can be used to copy the pictures in internal memory to a memory
card.
• A Speed Class 6 memory card is recommended when recording movies with
[x1280] selected for [Movie Size].
If you are using the camera for the first time, read this section.
• If an SD memory card is loaded, the camera does not record to the internal
memory, even if the card is full.
• Take care not to get the contacts of the card dirty.
• This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with the
card manufacturer. Also, Eye-Fi cards can only be used in the country in which
the cards were purchased. If it is unclear whether the card has been approved
for use in the area, please check with the card manufacturer.
25
Charging the Rechargeable Battery
The rechargeable battery needs to be charged before use.
1
Insert the battery into the battery charger, making sure that
the r and s markings on the battery match those on the
battery charger.
If you are using the camera for the first time, read this section.
• The battery label should face up.
Caution --------------------------------------------------------------------------------Be careful not to reverse the r and s sides.
2
Plug the battery charger into an
outlet.
• Use the battery charger (BJ-10)
to recharge the battery. With the
charger other than BJ-10, the
charging cannot be performed.
• Charging starts. Charging status
is indicated by the charger lamp
as shown in the table below. Once
charging has finished, unplug the
battery charger from the power
outlet.
Charger Lamp
Lit
Off
Flashing
Description
Charging
Charging complete
The battery charger terminal may be soiled or the battery
charger/battery may be faulty. Unplug the battery charger
from the power outlet, and remove the battery.
• The estimated battery charging time is shown below. Depending on
the battery level, the charging time differs.
Rechargeable Battery Charging Time
DB-100
Approx. 180 min. (25 °C)
26
Loading the Rechargeable Battery and SD Memory Card
After recharging the rechargeable battery, load the battery and the SD
memory card. Be sure the camera is off before removing the battery or
the SD memory card.
Open the battery/card cover.
2
Insert the rechargeable battery and SD memory card.
• Make sure the SD memory card is facing the right way and then push
the card all the way in until it clicks.
• When the rechargeable battery is loaded in place, it is locked with
the hook shown in the figure.
Logo side
• If the battery is not inserted in the correct orientation, the camera
will not turn on. Reinsert the battery in the correct orientation.
3
Close the battery/card cover and
slide it back into place.
If you are using the camera for the first time, read this section.
1
Removing the Rechargeable Battery
Open the battery/card cover. Release the hook that locks the
rechargeable battery. The battery is ejected. Pull the battery out of the
camera. Be careful not to drop the battery when removing it from the
camera.
Removing the SD Memory Card
Open the battery/card cover. Push in the SD memory card and gently
release to eject it. Pull the card out of the camera.
27
Turning the Power On/Off
Press the POWER button to turn the camera on
or off.
When the camera is turned on, a start-up sound
plays and the picture display turns on.
If you are using the camera for the first time, read this section.
If the POWER button is pressed when the
camera is on, the number of files recorded
on that day is displayed, and then the
camera turns off.
Note ------------------------------------------------------------------------------------• If you adjust the clock before turning the camera off, the camera will display the
number of shots taken since the clock was set.
• A zero is displayed if the clock is not set.
Using the Camera in Playback Mode
Pressing and holding the 6 (Playback)
button turns on the camera in playback
mode, allowing you to start playback at once.
When the camera has been turned on with
the 6 button, pressing the 6 button again
turns the camera off.
Sleep Mode and Auto Power Off -------------------------------------------------• If the camera goes unused for a set period of time, it automatically dims (Sleep
Mode) or turns itself off (Auto Power Off ) to save power.
• The sleep mode setting (GP.114) and the auto power off setting (GP.111)
can be changed.
Setting the Language, Date and Time
28
When the power is turned on for the first time, the language setting
screen appears (for the picture display language). After setting the
language, go on to the date/time setting (for printing the date and
time on your photos).
Setting the Language
1
Push the ADJ./OK button !"NF
to select a language.
2
Press the ADJ./OK button.
• The display language is set, and the date/time setting screen
appears.
Setting the Date and Time
1
Push the ADJ./OK button !"NF to set the year, month,
date, time and format.
• Change the setting with !" and
move the item with NF.
• You can cancel the setting by pressing
the DISP. button.
• For information on how to use the
ADJ./OK Button, see P.16.
2
Check the information on the screen and then press the
ADJ./OK button.
• The confirmation screen appears.
3
Press the ADJ./OK button.
If you are using the camera for the first time, read this section.
• When the DISP. button is pressed, the
language setting is canceled and the
date/time setting screen appears.
• The date and time are set.
• The language, date, and time can be changed at any time using the
[Language/N] and [Date Settings] items (GP.114) in the setup
menu (GP.109).
Note ------------------------------------------------------------------------------------• The [Date Imprint] item (GP.84) in the shooting menu (GP.78) can be used
to stamp photographs with the date and time of recording.
• To retain the date and time settings, load a battery with adequate remaining
power for more than two hours.
• If the battery is removed for more than one week, the date and time settings
will be lost. These settings must be made again.
29
Basic Shooting
Now you are ready.
Shooting in Auto Shooting Mode (Focus and Shoot)
If you are using the camera for the first time, read this section.
Turn the mode dial to 5 to shoot with auto
shooting mode.
The shutter release button works in two steps.
When you press the shutter release button halfway
(Half-press), the auto-focus function is triggered to
determine the focal distance. Next, press it all the way down (Fullpress) to shoot.
When your subject is not in the center of your composition, compose
your photo after focusing (Focus Lock).
1
Hold the camera with both hands and
lightly press both elbows against your
body.
2
Put your finger on the shutter release
button.
3
Frame the picture with your subject in the AF frame in the
center of the screen and press the shutter release button
halfway.
ĵĻ Ň
ĵĻĴ
• The camera focuses on the subject and the exposure and white
balance are fixed.
• The focal distance is measured at a maximum of nine points. Green
frames appear to indicate the positions that are in focus.
30
4
To take a picture with the subject in the foreground in focus
against a background, half-press the shutter release button to
focus on the subject, and then compose your shot.
Subject to be focused
5
Gently press the shutter release button all the way.
• The still image you have taken appears momentarily on the picture
display and is recorded to the internal memory or the SD memory card.
Caution --------------------------------------------------------------------------------• When you are shooting, be careful not to obstruct
the lens, flash, or AF window with your fingers, hair,
or the strap.
• Do not hold the lens unit. Zoom and focusing will
not be performed properly.
If you are using the camera for the first time, read this section.
Shooting range
31
About Focusing ----------------------------------------------------------------------• The color of the frame in the center of the picture display indicates whether the
subject is in or out of focus.
If you are using the camera for the first time, read this section.
32
Focus Status
Before focusing
Subject in focus
Subject not in focus
Frame Color
White
Green
Red (Flashing)
• It may be impossible to bring the following subjects into focus, or they may not
be in focus even when the frame color is green.
• Objects that lack contrast, such as the sky, a wall that is only one color, or the
hood of a car.
• Flat two-dimensional objects with only horizontal lines and no significant
protrusions.
• Quickly moving objects.
• Things in poorly lit places.
• Areas with strong backlighting, or reflections.
• Things that flicker, such as fluorescent lights.
• Point light sources, such as light bulbs, spotlights, or LEDs.
When you want to shoot subjects like this, first focus on an object the same
distance as your subject and then shoot.
Preventing Camera Shake --------------------------------------------------------• Press the shutter release button gently to prevent camera shake.
• If you move the camera when pressing the shutter release button, the still
image might not come out clearly due to camera shake.
Camera shake tends to occur in the following cases:
- When shooting in a dark place without using the flash
- When using the zoom function
- When [Time Exposure] (GP.82) is selected in the shooting menu (GP.78)
• When the J symbol appears on the picture display, this indicates that
camera shake may occur. To prevent camera shake, try any of the following.
- Selecting [On] for [Camera Shake Correction] (GP.84) in the shooting menu
(GP.78)
- Setting the flash to [Auto] or [Flash On] (GP.35)
- Raising the ISO setting (GP.92)
- Using the self-timer (GP.37)
Using the Zoom Function
ĵĻ Ň
ĵĻĴ
ĵĻ Ň
ĵĻĴ
řIJıįĸ
Wide-angle Telephoto
Zoom bar
ŤŮĮ
The white part of the zoom bar
SR
˴ijIJįĵ
ijIJįĵ
indicates the optical zoom (up to
10.7×); the green part of the zoom bar Super resolution
zoom
indicates the super resolution zoom
Optical zoom
(up to 2.0×).
When using the super resolution
zoom, the symbol appears on the
picture display and the zoom ratio is
displayed in green.
The super resolution zoom allows you to enlarge the subject with less
image deterioration.
If you are using the camera for the first time, read this section.
Turning the zoom lever toward z
(Telephoto) allows you to take a close-up
picture of the subject. Turning the zoom
lever toward Z (Wide-angle) allows you
to take a wide-angle picture. The amount
of zoom is shown by the zoom bar and the
zoom ratio in the picture display.
Note ------------------------------------------------------------------------------------• The [On] option (GP.110) selected for [Step Zoom] in the setup menu
(GP.109) allows optical zoom to be adjusted in eight discrete steps, and
super resolution zoom to be adjusted in two discrete steps.
• The super resolution zoom is enabled when the [Normal] option is selected for
[Digital Zoom Image] (GP.112) in the setup menu (GP.109).
• The super resolution zoom function cannot be used in movie mode, continuous
mode, or creative shooting mode.
33
Using the Digital Zoom -------------------------------------------------------------
If you are using the camera for the first time, read this section.
34
While you can use the super resolution zoom to enlarge the subject, the digital
zoom allows you to enlarge the subject still further (up to another 4.8 × for still
images, 2.8 × for movies with a frame size of 1280, or 4.0 × for movies with a
frame size of 640 or 320).
ŤŮĮ
To use the digital zoom, turn and hold the zoom lever
SR DZ
toward z until the maximum magnification is reached
˴IJıĴ
IJıĴ
on the zoom bar, then momentarily release the zoom
lever, and then turn the zoom lever again toward z.
When using the digital zoom, the symbol appears
on the picture display and the zoom ratio is displayed in
yellow. If [Picture Quality/Size] is set to j 4 : 3 F or j
4 : 3 N, you can also set [Digital Zoom Image] to [Auto
Resize] (GP.117).
Depending on the shooting mode or the settings in the shooting menu, the
digital zoom cannot be used (GP.140).
Shooting Close-Ups (Macro Shooting)
The macro shooting function lets you take
shots of subjects that are very close to the
camera. To shoot close-ups, push the ADJ./
OK button toward N (Macro). Pushing the
ADJ./OK button toward N (Macro) again
cancels macro mode.
Note ------------------------------------------------------------------------------------• During macro shooting, the minimum shooting distance changes depending
on the zoom position. To display the minimum shooting distance on the screen,
set [Minimum Distance] to [Show] (GP.113).
• [Focus] (GP.84) is set to [Spot AF].
• Macro mode is not available in some shooting modes (GP.140).
• To take a further close-up picture during macro shooting, use [Zoom Macro]
(GP.60) in scene mode.
• The minimum shooting distance and shooting range when using the zoom are
shown below.
Zoom
position
Focal
Length*
Using the Flash
You can select the flash mode that best suits your shot. At the time of
purchase, the camera is set to [Auto].
1
Push the ADJ./OK button toward F
(flash).
• The list of the flash modes symbol is
displayed on the picture display.
Flash Off
The flash will not fire.
Auto
The flash fires automatically when the subject is
poorly lit or backlit.
Reduces the red-eye phenomenon, in which people’s
eyes appear red in pictures.
The flash fires regardless of the lighting conditions.
Anti Red-eye
Flash On
Flash Synchro.
If you are using the camera for the first time, read this section.
Minimum Shooting Shooting Range
Distance (from the
front of the lens)
Wide-angle 31 mm
Approx. 1 cm
Approx. 28 mm × 21 mm
300 mm Approx. 28 cm
Approx. 45 mm × 34 mm
(when super resolution zoom/
digital zoom is not used)
600 mm Approx. 28 cm
Approx. 22 mm × 17 mm
(when 2.0 × super resolution
Telephoto
zoom/digital zoom is not used)
2880 mm Approx. 28 cm
Approx. 5 mm × 4 mm
(when 2.0 × super resolution
zoom/4.8 × digital zoom is used)
* Equivalent to that on a 35 mm camera
The flash fires with the shutter speed slowed. This is
useful when taking portrait pictures in a nightscape.
Camera shake may occur, so the use of a tripod is
recommended.
35
2
If you are using the camera for the first time, read this section.
36
Push the ADJ./OK button !" to select the flash mode.
• The flash mode symbol is displayed at the upper left of the picture
display.
• The flash mode symbol blinks at the upper left of the picture display
when the flash is charging. Once the flash is charged, the symbol
stops blinking and lights steadily and the camera is ready to shoot.
Caution --------------------------------------------------------------------------------• You cannot shoot when the flash is charging (approx. 5 seconds).
• After the camera is turned on, it may take longer for the camera to become
ready for shooting when using the flash.
Note ------------------------------------------------------------------------------------• The flash mode setting is retained until you push the ADJ./OK button toward F
(Flash) again.
• The flash does not fire when the following mode, option, or function is selected.
• Movie mode
• Continuous mode
• [Dynamic range double shot] option in creative shooting mode
• [Landscape], [Discreet Mode], [Pets], [Night Landscape Multi-shot],
[Fireworks], or [Golf Swing Continuous Mode] option in scene mode
• Multi-target AF
• Bracket shooting
• Flash level can be adjusted using the [Flash Exposure Compensation] item
(GP.82) in the shooting menu (GP.78).
• The auxiliary flash fires to increase the AE accuracy.
• The flash can not be used in some shooting modes or with some shooting
menu options (GP.140).
Using the Self-timer
You can set the self-timer to shoot after either two or ten seconds, or
you can select [Custom Self-Timer] (GP.83) to customize the selftimer setting.
1
• A list of self-timer mode settings appears on the picture display.
2
Push the ADJ./OK button !" to
select the mode.
ĵĻ Ň
ĵĻĴ
• The self-timer symbol and the
number of seconds are displayed at
the upper left of the picture display.
3
Press the shutter release button.
• When set to [10], the self-timer lamp lights for 8 seconds when the
self-timer starts and then blinks for the final 2 seconds before the
picture is taken.
• When set to [Custom Self-Timer], the self-timer lamp blinks for 2
seconds before each picture is taken, and pictures are taken at the
set shooting interval. The focus position is set for the first shot.
• When set to [Custom Self-Timer], press the MENU button to cancel
the self-timer during shooting.
Note ------------------------------------------------------------------------------------• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the t button and change the self-timer setting to [Self-Timer Off].
• When the self-timer is set to 2 seconds, the self-timer lamp does not light or blink.
• When the self-timer is set, the [Interval Shooting] setting is disabled.
If you are using the camera for the first time, read this section.
With the camera ready to shoot, press the t (Self-timer)
button.
37
Shooting in Scene Auto Mode
In scene auto mode, the camera selects the optimal
scene mode (GP.59) automatically.
The following scene modes can be selected.
If you are using the camera for the first time, read this section.
Scene Mode
Portrait
Refer to
P.59
Scene Mode
Landscape
Night. Port.
P.59
Nightscape
—
Sports
P.60
Macro Mode
P.34
N
Refer to
P.59
The icon of the selected scene mode is
shown in the display. If macro mode is
selected, an icon will be displayed on the
picture display.
ĵĻ Ň
ĵĻĴ
Nightscape Mode -------------------------------------------------------------------This scene is available only in scene auto mode. The flash will fire only if all the
following conditions are met:
• The flash is set to [Auto].
• The flash is determined to be necessary because it is dark.
• There is a figure or another object nearby.
Note ------------------------------------------------------------------------------------• For information on the options available in the shooting menu when scene
auto mode is selected, see P.140.
• If the camera is unable to select a scene, focus, exposure, and white balance will
respectively be set to multi AF, multi AE, and multi-pattern auto.
38
Playing Back Images
Viewing Your Images
Push the ADJ./OK button NF to display
the previous file or the next file. Push the
button !" to display the file 10 frames forward or backward.
To switch the camera from playback mode to shooting mode, press
the 6 button again.
The images played back in playback mode -----------------------------------For information on how to play back files with
S symbol, see P.74.
ĵĻ ŏ
ĵĻĴ
2011/01/01 00:00
Thumbnail View
20 Frames
If you are using the camera for the first time, read this section.
To select playback mode, press the 6
(Playback) button. When the camera is off,
pressing and holding the 6 (Playback)
button longer than 1 second turns the
camera on in playback mode.
If the zoom lever is turned toward 9 (Thumbnail View), the screen is
divided into 20 frames and thumbnails are displayed.
100-0009 Last File
2011/01
2011
2011/01/01
01/01
01 000:00
0:00
00
4:33 F
F
F3.5
3.5 1/30
30
Press the DISP. button to change between the thumbnail list and page
list. In the page list, push the ADJ./OK button !"NF to select the page.
39
To view an image full frame, select it in the thumbnail list and press the
ADJ./OK button or turn the zoom lever once toward 8 (Enlarged View).
81 Frames
If you are using the camera for the first time, read this section.
If the zoom lever is turned toward 9
when 20 frames are displayed, the screen
is divided into 81 frames and thumbnails
are displayed.
Press the DISP. button to change between
the thumbnail list and page list. In the
Thumbnail list
page list, push the ADJ./OK button
!"NF to select the page.
To switch to Single-Picture Display, select
the file in the thumbnail list and press the
ADJ./OK button or turn the zoom lever
twice toward 8 (Enlarged View).
Page list
Date of Recording
If the zoom lever is turned toward 9
again when 81 frames are displayed, the
thumbnails are listed by date of recording.
Press the DISP. button to change between
the thumbnail list and date list. In the date
list, push the ADJ./OK button NF to select
the date, or push the ADJ./OK button !" Thumbnail list
to select the page.
To switch to Single-Picture Display, select
the file in the thumbnail list and press the
ADJ./OK button or turn the zoom lever 3
times toward 8 (Enlarged View).
Date list
40
Enlarging Images
Turn the zoom lever toward 8 (Enlarged View) to zoom in on the
selected still image. The magnification varies depending on the image
size.
Image Size
z 4 : 3F
a 4 : 3F
Image sizes other than those above
Pressing the DISP. button at this point changes the display as follows.
101-0084 Last File
DISP. button
Pushing the ADJ./OK button
!"NF at this point moves
the area displayed.
Pushing the ADJ./OK button
!"NF at this point moves
the area displayed.
101-0084 Last File
Pressing and
holding the
DISP. Button
Pressing and
holding the
DISP. Button
Pushing the ADJ./OK button NF at this point
displays the previous or next image enlarged.
When an MP file or a movie is displayed, the
display returns to the normal size.
If you are using the camera for the first time, read this section.
Enlarged View
(maximum magnification)
3.4 ×
6.7 ×
16 ×
Turn the zoom lever toward 9 (Thumbnail View) to return to the
original size.
Note ------------------------------------------------------------------------------------• Movies cannot be enlarged.
• For information on how to enlarge MP files, see P.74–75.
• Cropped copies (GP.97) can not be zoomed in to the magnifications stated
above.
41
Deleting Files
You can delete files from the SD memory card or internal memory.
Note -------------------------------------------------------------------------------------
If you are using the camera for the first time, read this section.
The [Recover File] item (GP.95) in the playback menu (GP.93) can be used to
recover files that have been deleted accidentally. Note, however, that files cannot
be recovered if, for example, the camera has been turned off or shooting mode
has been selected since the files were deleted.
Deleting a File or All Files
1
Press the 6 (Playback) button.
2
Push the ADJ./OK button !"NF to display the file you
want to delete.
• To delete multiple files, you can also turn the zoom lever toward 9
(Thumbnail View) to display thumbnail view, and then go to Step 3.
3
4
Press the D (Delete) button.
Push the ADJ./OK button !" to
select [Delete One] or [Delete All].
• You can change the image for
deletion with the ADJ./OK button NF.
5
42
• The last file recorded is displayed.
Press the ADJ./OK button.
• If [Delete All] is selected, push the ADJ./OK button NF to select [Yes]
and then press the ADJ./OK button.
Deleting Multiple Files
You can select multiple files for simultaneous deletion either
individually or by selecting one or more ranges consisting of two
images and all photographs between them. To delete multiple files,
press the D (Delete) button in playback mode and follow the steps
below (to exit at any time without deleting images, press DISP.).
1
Push the ADJ./OK button !" to select [Delete Multi] and
then press the ADJ./OK button.
• Omit this step if the camera is already in multi-frame view.
2
Push the ADJ./OK button !" to select [Sel. Indiv.] and then
press the ADJ./OK button.
3
Push the ADJ./OK button !"NF
to select the file you want to
delete and press the ADJ./OK
button.
Delete
Last File
4:33 F
• The trash symbol is displayed in the
upper left corner of the file.
Delete
Sel/Cancel
• Press the MENU button to switch to
the display for specifying a range of files. See Step 3 and beyond on
P.44.
4
Repeat Step 3 to select all the files you want to delete.
5
6
Press the D (Delete) button.
• If you selected a file by mistake, you can deselect it by selecting the
file and pressing the ADJ./OK button.
• Press DISP. to cancel and return to Step 2.
If you are using the camera for the first time, read this section.
Specifying Multiple Files Separately
Push the ADJ./OK button NF to select [Yes] and then press
the ADJ./OK button.
43
Specifying a Range of Multiple Files
1
Push the ADJ./OK button !" to select [Delete Multi] and
then press the ADJ./OK button.
• Omit this step if the camera is already in multi-frame view.
If you are using the camera for the first time, read this section.
44
2
Push the ADJ./OK button !" to select [Sel. Range] and
then press the ADJ./OK button.
3
Push the ADJ./OK button !"NF
to select the starting point of the
range of files you want to delete
and press the ADJ./OK button.
67
67/89
89
Delete
4:33 F
• If you make a mistake when selecting
the starting point for the range of
Cancel
End
files, press the DISP. button to return
to the screen for selecting the starting point.
• Press the MENU button to switch to the display for specifying files
separately. See Step 3 and beyond on P.43.
4
Push the ADJ./OK button !"NF
to select the ending point of the
range of files you want to delete
and press the ADJ./OK button.
• The trash symbol is displayed in the
upper left corner of the specified files.
• Press DISP. to cancel and return to
Step 2.
70
70/89
89
Delete
Start
4:33 F
Delete
5
Repeat Steps 3 and 4 to specify all the ranges of files you
want to delete.
6
7
Press the D (Delete) button.
Push the ADJ./OK button NF to select [Yes] and then press
the ADJ./OK button.
Changing the Display with
the DISP. Button
During Shooting Mode
Normal Symbol Display
Picture Display Off
(Synchro-Monitor Mode)
Histogram Display
Grid Guide Display
No Display
Grid Guide Display------------------------------------------------------------------• This displays auxiliary lines on the picture display to help you compose your
picture. These lines are not recorded with images.
• Use [Grid Guide Display Options] on the setup menu to select the grid.
(GP.112)
If you are using the camera for the first time, read this section.
Pressing the DISP. button allows you to change the screen display
mode and toggle the information displayed on the picture display.
Synchro-Monitor Mode ------------------------------------------------------------This turns the picture display off except when the camera is operated. This is
effective for saving power consumption. In this mode, pressing the shutter release
button halfway turns the picture display on. Subsequently, pressing the shutter
release button fully displays the shot image on the picture display and then turns
the picture display off. (This setting is different from [LCD Auto Dim] in the setup
menu.)
45
Note -------------------------------------------------------------------------------------
If you are using the camera for the first time, read this section.
46
• When [Shooting Info. Display Frame] is set to [On] in the setup menu, the
shooting information display frame can be displayed for normal symbol display
and histogram display (GP.112).
• Histograms are not displayed in movie mode. A blinking [O] icon, the
recording time, and the time available are displayed during recording even
when indicators are hidden or the grid guide is displayed.
• When [Level Setting] is set to [Display] or [Display+Sound] (GP.48), the level
indicator is displayed during normal symbol display and histogram display
(GP.49).
• If any of the following operations is performed, the picture display turns on
even when it is turned off.
- When the ADJ./OK button, MENU button, DISP. button, or 6 (Playback)
button is pressed.
- When the zoom lever is turned.
• Changing the display with the DISP. button is not available when scene auto
mode is selected.
During Playback Mode
Normal
Symbol
Display
Histogram
and Detailed
Information Display
2011/01/01 00:00
2011/01/01 00:00
White Saturation Display
2011/01/01 00:00
White Saturation
Highlights Display
(only if [ White
Saturation Display]
is set to [On])
White Saturation Highlights Display-------------------------------------------• If [White Saturation Display] is set to [On] in the setup menu (GP.113),
pressing the DISP. button while the histogram and detailed information are
displayed switches to the highlight display.
• The white saturation areas of the image flash in black. White saturation is the loss
of tone that indicates the color shading in an image in which very bright areas of
the subject are rendered in white. An image with a loss of image tone cannot be
edited later. It is recommended that you shoot another image by changing the
composition or by setting the exposure level lower (–) (GP.90).
• The white saturation highlights display is for reference only.
If you are using the camera for the first time, read this section.
No
Display
47
About the Electronic Level
When [Level Setting] is turned on in the setup menu or by pressing
and holding the DISP. button, the camera uses a level indicator
and level sound to let you know whether the image is level during
shooting. The level indicator is displayed during normal symbol display
and histogram display.
If you are using the camera for the first time, read this section.
48
This is useful for keeping the image level when taking pictures of
scenery or buildings. This is also very useful for taking pictures with the
horizon visible.
Available Settings
Description
Off
The level indicator will not display. The level sound will not emit.
Display
The level indicator will display. The level sound will not emit.
Display + Sound
The level indicator appears on the screen and a level sound is
emitted when the image is level.
Sound
The level indicator will not display. A level sound is emitted
when the image is level.
1
Select [Level Setting] in the setup
menu (GP.109) and push the
ADJ./OK button F.
• You can also press and hold the DISP.
button in shooting mode to display
the setting menu.
2
Push the ADJ./OK button !" to select the setting and then
press the ADJ./OK button.
Level indicator display
When level:
The level indicator becomes green,
indicating that the scale is in the middle.
Green
When the camera is tilted too far to the
right or left:
Half of the level indicator on the opposite
side of the direction in which the camera
is tilted becomes red. The mark on the
level indicator is not displayed.
When the camera is tilted too far forward
or backward, or it cannot be determined
whether the camera is level:
The top and bottom of the level indicator
become red. The mark on the level
indicator is not displayed.
Orange
Red
Red
When the camera is held vertically:
When shooting with the camera positioned vertically, the level function
can be used to determine whether the image is vertically level (the level
indicator appears in a different place).
Caution --------------------------------------------------------------------------------• During grid guide display, no display, or when the picture display is turned off
(GP.45), the level sound is emitted, but the level indicator is not displayed.
When [Level Setting] is set to [Display+Sound], only the level sound is emitted.
• The level function is not available if the camera is held upside down, when
recording movies, and during interval shooting.
• The level function becomes less accurate when the camera is moving or when
shooting in an environment subject to moving, such as on a amusement ride.
• No level sound is emitted when [Level Setting] is set to [Display+Sound] or
[Sound] and [Volume Settings] is set to [………] (Mute) (GP.111).
• Use this function as a reference to see if images are level when shooting
images. The accuracy of the level when using the camera as a level cannot be
guaranteed.
If you are using the camera for the first time, read this section.
When tilted to the right or left:
The mark on the level indicator becomes
orange, indicating the opposite side of the
direction in which the camera is tilted.
49
About the Histogram Display
If you are using the camera for the first time, read this section.
When Histogram is on, a histogram
appears in the lower right corner on the
picture display. A histogram is a graph
indicating the number of pixels on the
vertical axis and the brightness on the
horizontal axis (from left to right, shadows
(dark areas), midtones, and highlights
(bright areas)).
By using the histogram, you can determine the brightness of an image
without being affected by the brightness around the picture display.
This also helps you correct for areas that are overly bright or dark.
If the histogram has only peaks on the
right side, this picture is overexposed
with too many pixels only for highlight
sections.
If the histogram has only peaks on the left
side without anything else, this picture
is underexposed with too many pixels
only for shadow sections. Refer to this
histogram when correcting the exposure.
Note ------------------------------------------------------------------------------------• The histogram displayed on the picture display is for reference only.
• After taking a picture, you can correct its brightness and contrast by making
adjustments to the histogram (GP.100).
• Depending on the shooting conditions (use of the flash, dark surrounding light,
etc.), the exposure level indicated in the histogram may not correspond to the
brightness of the shot image.
• Exposure compensation has its limitation. It does not necessarily achieve the
best possible result.
• A histogram with peaks in the center may not necessarily provide the best result
to suit your particular requirements. For example, an adjustment is required if
you want to underexpose or overexpose the image.
• For information on how to correct the exposure compensation, see P.90.
50
Advanced
Operations
1
Read this section when
you want to learn more
about the different camera
functions.
1 ADJ. Button Functions ...................52
2 Using the Fn (Function) Button
........................................................55
3 Shooting Mode Types.....................59
4 Playback Functions ........................74
5 Shooting Menu ...............................78
6 Playback Menu ...............................93
7 Setup Menu ..................................109
8 Direct Printing ..............................118
9 Downloading Images to Your
Computer .....................................123
10 Appendices ...................................134
2
3
4
5
6
7
8
9
10
1 ADJ. Button Functions
The ADJ./OK button has the following functions. For the operating
procedure of each function, see the corresponding reference page.
1 Assigning four functions from the shooting menu
2 Shifting the AE and AF targets
1
ADJ. Button Functions
Selecting Shooting Menu Options Assigned
to the ADJ./OK Button
You can assign four functions from the shooting menu to the ADJ./OK
button. The fifth function is fixed to AE/AF target shift (GP.53) and
cannot be changed.
By using the ADJ./OK button, you can make settings with fewer
button operations and without displaying the shooting menu. This is
convenient for frequently used functions.
1
Set the functions you want to assign to the ADJ./OK button
with [ADJ Button Setting 1/2/3/4] on the setup menu.
• At the time of purchase, four of the functions are assigned. You can
change the assigned functions.
2
Press the ADJ./OK button in
shooting mode.
• The ADJ. mode screen appears.
AE/AF
AF
AE
Off
Move Slctn
3
4
Finish
Push the ADJ./OK button NF to select the desired item.
Push the ADJ./OK button !" to select the setting and then
press the ADJ./OK button to confirm the setting.
Note ------------------------------------------------------------------------------------• For functions that can be assigned to the ADJ./OK button, see P.142.
• Press the MENU button in the ADJ. mode to display the shooting menu.
52
Shifting the AE and AF Targets
You can shift the target for automatic exposure (AE) and/or auto focus
(AF).
Available Setting
AE/AF
AF
1
Turn the mode dial to 5/X/R and then press the ADJ./OK
button.
2
Push the ADJ./OK button NF to
select P.
3
Push the ADJ./OK button !" to
select the setting and then press
the ADJ./OK button.
• The target shift screen appears.
4
AE/AF
AF
AE
Off
Move Slctn
Finish
Select
Ok
Push the ADJ./OK button !"NF
to position the target over the
subject that will be used to set
focus or exposure.
• Pressing the DISP. button returns the
display to the screen in Step 2.
5
6
1
ADJ. Button Functions
AE
Description
AE and AF are set to Spot AE and Spot AF respectively and the
target can be moved for both simultaneously. (The targets for
Spot AE and Spot AF occupy the same position.)
The AF is set to Spot AF and the target can be moved. The
exposure metering is set to the mode selected in [Exposure
Metering] in the shooting menu (GP.81).
The AE is set to Spot AE and the target can be moved. The focus
is set to the mode selected in [Focus] in the shooting menu
(GP.80).
Press the ADJ./OK button.
Press the shutter release button halfway and then gently
press it the rest of the way down.
53
Note -------------------------------------------------------------------------------------
1
ADJ. Button Functions
54
• With the [Cooking]/[Zoom Macro] option in scene mode, or choosing macro
mode by pushing the ADJ./OK button N (macro) while in movie mode, or in
the [High Sens], [Skew Correct Mode], or [Text Mode] option in scene mode,
the target icon (P) changes to U.
• The macro target shift function is not available when the [Miniaturize] or [Toy
Camera] option is selected in creative shooting mode.
• If the macro target shift function is activated using the Fn button (GP.55) and
not canceled, P will not be displayed.
• This function is available when [Focus] (GP.80) is set to [Multi AF], [Spot AF],
[Snap], or [∞ (Infinity)].
2 Using the Fn (Function) Button
Simply press the Fn button to quickly access the function assigned to it
using the [Set Fn Button] option in the setup menu (GP.56).
The function assigned to the Fn button can be selected from the
options below.
Available Setting
Macro Target
Refer to
P.56
P.57
P.58
P.58
P.58
P.58
P.58
P.111
P.88
*1 [Multi AF], [Spot AF] or [Subj. Tracking]
*2 [Multi AF], [Spot AF] or [Face Pr. Multi]
*3 [Multi AF], [Spot AF], [Face Pr. Multi] or [Subj. Tracking]
2
Using the Fn (Function) Button
Description
Moves the AF target without moving the camera to
shoot close-ups.
AE Lock
Locks the exposure.
AF/Face Pr.
Switches between autofocus*1 and face-priority
multi AF.
Switch between autofocus*2 and subject tracking AF.
AF/Subj.Trckng
AF/Multi Trgt
Switches between auto focus*3 and multi-target AF.
AF/MF
Switches between auto focus*3 and manual focus.
AF/Snap
Switches between auto focus*3 and snap mode.
Step Zoom, AT-BKT, Switches between on and off for each function.
WB-BKT, CL-BKT,
FOCUS-BKT
Note ------------------------------------------------------------------------------------• For information on the items that can be assigned in each shooting mode, see
P.140.
• The Fn button can not be used to access the listed function when [Miniaturize]
(GP.71) is selected in creative shooting mode.
• Pressing the Fn button in playback mode displays the image assigned with
[Flag Function Setting]. For the operating procedure, see P.96.
• Selecting [Trim], [Level Compensation] (when [Manual] is selected), or [White
Balance Compensation] on the playback menu, and pressing the Fn button
displays the screen that describes the operating procedure (GP.97, 100, 102).
55
Assigning a Role to the Fn Button
To assign functions to the Fn button, follow the steps below.
1
Select [Set Fn Button] in the setup
menu (GP.109) and push the
ADJ./OK button F.
2
Select the setting and then press
the ADJ./OK button.
2
Using the Fn (Function) Button
Shifting the AF Target for Macro Shooting
You can select the focus target for close-ups.
1
2
Set [Set Fn Button] to [Macro Target] on the setup menu.
With the camera ready to shoot,
press the Fn button.
• The macro target shift screen appears.
Cancel
Ok
3
Push the ADJ./OK button !"NF to move the cross-mark to
the desired target position.
4
Press the ADJ./OK button.
5
Press the shutter release button halfway and then gently
press it the rest of the way down.
• Pressing the DISP. button cancels the macro target shift function.
• The camera focuses on the area at the position of the cross-mark.
• Pushing the ADJ./OK button toward N (Macro) cancels the macro
target shift function.
Note ------------------------------------------------------------------------------------If the AE/AF target shift function is activated using the ADJ./OK button (GP.53)
and not canceled, the macro target shift function cannot be used by pressing the
Fn button.
56
Locking the Exposure
Assigning [AE Lock] to the Fn button (GP.56) and then pressing the
Fn button during shooting allows you to lock or cancel the exposure.
1
Set [Set Fn Button] to [AE Lock] on the setup menu.
2
With the camera ready to shoot, position subject in the
center of the picture display and press the Fn button.
• For the operating procedure, see P.56.
Note ------------------------------------------------------------------------------------• The AE lock function cannot be used in movie mode.
• The AE lock function can only be used when [Time Exposure] is set to [Off ].
2
Using the Fn (Function) Button
• The exposure is locked and the AEL
mark, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn button again cancels
the AE lock.
57
Choosing a Focus Setting
If any of the following functions is assigned to the Fn button (GP.56),
you can change the focus setting during shooting by pressing the Fn
button.
Available Setting
AF/Face Pr.
AF/Subj.Trckng
2
AF/Multi Trgt
Using the Fn (Function) Button
AF/MF
58
AF/Snap
Description
Switch between multi, spot, or subject tracking AF and facepriority multi AF (GP.80).
Switch between multi, spot, or face-priority multi AF and
subject tracking AF.
Switch between multi, spot, face-priority multi, or subject
tracking AF and multi-target AF.
Switch between multi, spot, face-priority multi, or subject
tracking AF and manual focus.
Switch between multi, spot, face-priority multi, or subject
tracking AF and snap focus.
Caution --------------------------------------------------------------------------------The Fn button only be used to switch between the listed modes. If another focus
mode is selected, pressing the Fn button has no effect.
3 Shooting Mode Types
Scene Mode (W)
In scene mode, you can choose from one of the following 14 subject
types. Camera settings are automatically optimized for the selected
subject type.
Scene Modes
Portrait
3
Shooting Mode Types
Use for portraits. The camera
automatically detects up to eight
faces, and adjusts focus, exposure,
and white balance. The faces
detected by the camera are shown
ŇĴįĶ IJİIJııı
ŊŔŐġIJıı
by square borders.
The camera may not be able to recognize faces in the following
cases:
• When the face is side-view, tilted, or moving
• When the camera is tilted or upside down (the shutter release
button is facing down)
• When the face is partially hidden or at the edge of the frame
• When the face is not clearly visible because of dark
surroundings
• When the subject is too far away (Make sure that the face
appearing in the picture display is vertically longer than one
block marked by the grid guide. GP.45).
Use when taking scenery pictures with abundant greenery or blue
sky.
Landscape
Use where lights and sounds emitted by the camera may be
unwelcome. The flash (GP.35), AF auxiliary light (GP.111), and
Discreet Mode speaker (GP.111) turn off and flash, AF auxiliary light, and sound
settings can not be adjusted.
Use when taking portrait pictures against a nightscape. The flash
fires automatically. The shutter speed slows down, so be careful of
camera shake.
Night. Port.
59
Night
Landscape
Multi-shot
Fireworks
Cooking
3
Shooting Mode Types
Sports
Pets
Golf Swing
Continuous
Mode
Zoom Macro
High Sens
60
Use for night scenes. Blur caused by camera shake is reduced even
in handheld shots. Four shots are taken in succession and combined
to create a single image, increasing the time needed to record
photographs in comparison to other modes. The J icon is
always displayed when the shutter-release button is pressed halfway.
Use for fireworks scenes. Focus, ISO sensitivity, and white balance
are locked to ∞ (Infinity), ISO 100, and AUTO respectively. Pressing
the Fn button allows you to toggle the exposure time from [2
seconds], [4 seconds] (the default option), and [8 seconds]. Hold
the camera steady by using a tripod when shooting.
Use when taking cooking pictures. Macro mode is selected
automatically. Pressing the Fn button displays the screen for
cooking picture settings. Push the ADJ./OK button !" to adjust
the brightness; push the button NF to adjust the color.
Use when taking pictures of moving objects.
Use to photograph cats and other pets. The flash (GP.35), AF
auxiliary light (GP.111), and speaker (GP.111) turn off and
flash, AF auxiliary light, and sound settings can not be adjusted.
Use when checking golf swings, etc. The camera shoots in M-Cont
Plus (2M) (GP.67). The grid line is displayed when shooting and
for playback. Pressing the Fn button displays the screen for grid
line settings. Push the ADJ./OK button !"NF to change the
grid point; press the D (Delete) button to change the grid type (If
the grid point is changed with the [Change Grid Point] option in
the playback menu (GP.93), the grid type cannot be changed
with the D (Delete) button).
The camera automatically zooms to the optimal zoom position
to shoot at a higher magnification than in normal macro
shooting. Optical zoom can not be used. Macro mode is selected
automatically.
Use when taking pictures in dimly lit places. The picture display
also becomes brighter.
Skew Correct
Mode
Text Mode
Reduce the effects of perspective when photographing
rectangular objects, such as message boards or business cards. For
detailed operations, see P.63.
Image size can be set to [a 4 : 3 F] or [z 4 : 3 F] using the
[Picture Quality/Size] option (GP.79) in the shooting menu
(GP.78).
Use when capturing text images, for example notes written on a
whiteboard at a meeting. Images are captured in black and white.
Image size can be set to [j 4 : 3] or [c 4 : 3] using the [Size]
option (GP.80) in the shooting menu (GP.78).
• In [Discreet Mode] or [Pets]:
- The beep does not sound.
- Pushing the ADJ./OK button to F (flash) does not change the flash mode
(GP.31).
- The self-timer lamp will not blink and a beep will not sound in self-timer
mode (GP.32).
Note -------------------------------------------------------------------------------------
3
Shooting Mode Types
Caution ---------------------------------------------------------------------------------
• When using [Zoom Macro], you can shoot close-ups within the following
distances:
Focal
Length*
Minimum Shooting Shooting Range
Distance (from the
front of the lens)
70 mm
Approx. 1 cm
Approx. 19 mm × 14 mm
(when super resolution zoom/digital
zoom is not used)
140 mm
Approx. 1 cm
Approx. 9 mm × 7 mm
(when 2.0 × super resolution zoom/
digital zoom is not used)
672 mm
Approx. 1 cm
Approx. 2 mm × 1 mm
(when 2.0 × super resolution zoom/4.8 ×
digital zoom is used)
* Equivalent to that on a 35 mm camera
• The image stabilization technology utilized in the Night landscape multi-shot is
PhotoSolid®, a product of Morpho, Inc.
61
Selecting a Scene Mode
1
Turn the mode dial to W.
• The camera is ready to shoot and the
selected scene mode is displayed at
the top of the picture display.
ĵĻ Ň
ĵĻĴ
3
Shooting Mode Types
2
Press the MENU button to change
the scene mode.
• The scene mode selection screen
appears.
3
Select a scene mode.
4
Press the ADJ./OK or Fn button.
5
Press the shutter release button to shoot the picture.
• Pressing ADJ./OK button returns the camera to shooting mode with
the selected option shown at the top of the picture display.
• Pressing Fn button selects the highlighted option and displays the
shooting menu (GP.78).
Changing the shooting menu or setup menu setting in scene mode ---After pressing the MENU button in shooting mode to display the menus, push
the ADJ./OK button N to select the [MODE] tab. You can then push " once to
display the shooting menu or twice to display the setup menu.
62
Using Skew Correction Mode
1
Select [Skew Correct Mode] in the scene mode menu and
press the ADJ./OK button.
2
Press the shutter release button to shoot the picture.
Press the ADJ./OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The original image remains unchanged.
Note ------------------------------------------------------------------------------------You can also correct the skew of a previously shot still image (GP.103).
Caution ---------------------------------------------------------------------------------
3
Shooting Mode Types
3
• The display indicates that the image is being processed, and then
the area recognized as the correction range is displayed with an
orange frame. Up to five areas can be recognized.
• If the target area cannot be detected, an error message appears. The
original image remains unchanged.
• To select another correction area, move the orange frame to the
target area by pushing the ADJ./OK button F.
• To cancel skew correction, push the ADJ./OK button !. Even if you
cancel skew correction, the original image remains unchanged.
When [Skew Correct Mode] is selected, note the following:
• To shoot the subject as large as possible, position it so that the entire portion
of the subject is visible on the picture display.
• The camera may fail to recognize the subject in the following cases:
- When the image is out of focus
- When four edges of the subject are not clearly visible
- When it is hard to distinguish between the subject and background
- When the background is complicated
• Two images, one before correction and the other after correction, are
recorded. If the number of remaining shots is less than two, you cannot shoot
the subject.
• The correction area may not be detected properly if the [Date Imprint]
function is activated.
63
Continuous Mode (R)
Turn the mode dial to R to use the various continuous shooting
functions. Continuous mode can be selected from the continuous
mode selection dialog displayed when the MENU button is pressed.
Continuous Modes
3
Shooting Mode Types
This is the normal continuous mode. Pictures continue to be taken
for as long as you hold down the shutter release button. Images are
Continuous recorded one at a time, just as in normal shooting. The number of
images that can be shot in continuous mode depends on the image
Mode
size setting (GP.79).
The camera shoots while the shutter-release button is pressed, but
only the last 15 frames (about the last three seconds of shooting) are
M-Cont Plus recorded to create a single multi-picture (MP) file (GP.66).
(10M)
The camera shoots while the shutter-release button is pressed, but
only the last 26 frames (about the last 0.9 seconds of shooting) are
M-Cont Plus recorded to create a single multi-picture (MP) file (GP.67).
(2M)
While the shutter-release button is pressed, the camera shoots up to
120 frames at about 60 frames per second and groups them together
Speed Cont in a single MP file. About 2 s are required to shoot the entire sequence
(GP.67).
(Low)
While the shutter-release button is pressed, the camera shoots up
to 120 frames at about 120 frames per second and groups them
Speed Cont together in a single MP file. About 1 s is required to shoot the entire
sequence (GP.67).
(High)
MP file ---------------------------------------------------------------------------------MP is a file format for recording a set of still images.
Caution --------------------------------------------------------------------------------Recording times may increase when internal memory is used.
64
Taking Pictures in Continuous Mode
1
Turn the mode dial to R.
• The camera enters shooting mode
with the current continuous mode
shown at the top of the picture
display.
ĵĻ Ň
ĵĻĴ
3
3
Select the desired option.
4
Press the ADJ./OK or Fn button.
5
Press the shutter release button to shoot the picture.
• To choose a different continuous mode, press the MENU button to
display continuous mode options.
Shooting Mode Types
2
Press the MENU button.
• Pressing ADJ./OK button returns the camera to shooting mode with
the selected option shown at the top of the picture display. Pressing
Fn button selects the highlighted option and displays the shooting
menu (GP.78).
Accessing the Shooting and Setup Menus-------------------------------------After pressing the MENU button in shooting mode to display the menus, push
the ADJ./OK button N to select the [MODE] tab. You can then push the " button
once to display the shooting menu or twice to display the setup menu.
65
Note ------------------------------------------------------------------------------------• Focus, exposure value, and white balance are locked.
• ISO sensitivity is raised.
• Flickering may be recorded as horizontal bands when pictures are taken under
fluorescent lights.
• When [Card Sequence No.] is set to [On] (GP.113) and the last four digits of
the file number exceed “9999” during continuous shooting, a separate folder
is created in the SD memory card and successive pictures taken in continuous
mode are stored in this folder.
M-Cont Plus (10M)
3
The camera shoots while the shutter release button is pressed all the
way down, but only the last 15 frames (about the last three seconds of
shooting) are recorded, creating a single multi-picture (MP) file.
Shooting Mode Types
When you remove your finger
from the shutter release button...
…the camera records the 15 frames taken
in the last 3 s of shooting.
Caution --------------------------------------------------------------------------------The time needed to record 15 frames may increase if lighting is poor.
Note ------------------------------------------------------------------------------------• The image size is fixed at j 4 : 3 N.
• The time for each shot in the sequence is recorded separately.
66
M-Cont Plus (2M)
The camera shoots while the shutter release button is pressed all the
way down, but only the last 26 frames (about the last 0.9 seconds of
shooting) are recorded, creating a single multi-picture (MP) file.
When you remove your finger
from the shutter release button...
…the camera records the 26 frames taken
in the last 0.9 seconds of shooting.
Note ------------------------------------------------------------------------------------• The image size is fixed at b 4 : 3 N.
• The time at which you remove your finger from the shutter release button is
recorded as the time of shooting for all photographs in the sequence.
Shooting Mode Types
Caution --------------------------------------------------------------------------------When shooting a fast-moving subject, the subject may be distorted in the
recorded image.
3
Speed Cont (Low)/Speed Cont (High)
120 consecutive images are recorded in one second (Speed Cont
(High)) or two seconds (Speed Cont (Low)).
Caution --------------------------------------------------------------------------------When shooting a fast-moving subject, the subject may be distorted in the
recorded image.
Note ------------------------------------------------------------------------------------• The image size is fixed at z 4 : 3 N.
• The time at which you remove your finger from the shutter release button is
recorded as the time of shooting for all photographs in the sequence.
67
Creative Shooting Mode (X)
Choose from six creative photographic effects.
Creative Shooting Mode Options
Create images with natural contrast, reducing loss of detail in
shadows and highlights. For detailed operations, see P.70.
3
Shooting Mode Types
68
Dynamic
Range
Use to create pictures that appear to be photos of dioramas. For
detailed operations, see P.71.
Miniaturize
Use to create black-and-white images with higher contrast than
those normally produced using black and white (GP.81).
High Contrast Produces grainy images similar to those taken with highly sensitive
film or high gain film processing.
B&W
Choose for soft focus effects similar to those created by soft focus
lenses. The amount of softening can be selected using the [Soft
Focus Options] item in the shooting menu (GP.79).
Soft Focus
Take photographs with colors that differ markedly from those of the
actual subject. The colors can be selected using the [Hue] option in
Cross Process the shooting menu (GP.79).
Take photographs with the high contrast, saturated colors,
distortion, and vignetting associated with toy cameras. Use the
Toy Camera [Vignetting] option in the shooting menu (GP.79) to choose the
amount of vignetting, the [Toy Color] option (GP.79) to choose
the amount of saturation.
Taking Pictures in Creative Shooting Mode
1
Turn the mode dial to X.
• The camera enters shooting mode
with the current creative shooting
mode option shown at the top of the
picture display.
ĵĻ Ň
ĵĻĴ
3
3
Select the desired mode.
4
Press the ADJ./OK or Fn button.
5
Press the shutter release button to shoot the picture.
• To choose a different creative shooting mode, press the MENU
button to display creative shooting mode options.
Shooting Mode Types
2
Press the MENU button.
• Pressing ADJ./OK button returns the camera to shooting mode with
the selected option shown at the top of the picture display.
• Pressing Fn button selects the highlighted option and displays the
shooting menu (GP.78).
Accessing the Shooting and Setup Menus-------------------------------------After pressing the MENU button in shooting mode to display the menus, push
the ADJ./OK button N to select the [MODE] tab. You can then push the " button
once to display the shooting menu or twice to display the setup menu.
69
Dynamic Range Double Shot
“Dynamic range” refers to the range of brightnesses (tone levels) that
can be expressed by the camera. Dynamic range double shot creates a
smooth transition from highlights to shadows for natural contrast.
Note ------------------------------------------------------------------------------------With dynamic range double shot, two consecutive pictures are taken with
different exposures and then the areas with the appropriate exposure are
combined together. This mode uses a longer shooting time than other modes,
so be careful of camera shake when taking pictures. The J symbol is always
displayed.
3
Shooting Mode Types
Two consecutive shots
Combined and saved
Caution --------------------------------------------------------------------------------• Dynamic range double shot may not be effective if the shooting location is
overly bright or dark.
• We recommend that you select [Multi] for [Exposure Metering] (GP.70) in the
shooting menu (GP.78) when using dynamic range double shot.
• When shooting a fast-moving subject, the subject may be distorted in the
recorded image.
• Flicker from fluorescent lights may appear as horizontal bands. Fluorescent
lighting may also affect colors and brightness.
Dynamic Range Expansion Effect
The [Dynamic Range Expansion] option
in the shooting menu offers five levels
of dynamic range expansion: [AUTO],
[Very Weak], [Weak], [Medium], and
[Strong]. The stronger the expansion
effect, the wider the range of brightnesses
processed by the camera.
70
The effect can be chosen using the [Dynamic Range Expansion] option
when [Dynamic Range] is selected in creative shooting mode.
If an option other than [AUTO] is
highlighted when you push the ADJ./OK
button F, the menu shown at right will be
displayed. Choose the tone range given
priority for expanded dynamic range from
[Highlights], [Shadows], and [Off ].
Shooting in Miniaturization Mode
This mode creates pictures that appear to be photos of dioramas. It is
most effective when pictures are taken from a high vantage point.
Select [Miniaturize] in the creative shooting mode menu
and press the ADJ./OK button.
2
Press the Fn button.
• The miniaturization setting screen
appears.
• The areas that will not be in focus in
the final photograph are shown in
gray.
• Press the DISP. button to cancel the
setting.
3
Shooting Mode Types
1
Note ------------------------------------------------------------------------------------When the camera is held vertically, the area
that will be in focus is shown in horizontal
orientation. Press the D button to re-orient
the area that will be in focus.
71
3
Push the ADJ./OK button !" to
reposition the area that will be in
focus.
• For help, press the Fn button. Press
the Fn button again to clear help from
the display.
3
Shooting Mode Types
4
Push the ADJ./OK button NF to
choose the width of the area that
will be in focus.
5
Press the ADJ./OK button.
6
Frame a picture and press the shutter release button
halfway to focus, then press the shutter release button the
rest of the way down to take the picture.
Caution --------------------------------------------------------------------------------The focus of the final image differs slightly from that in the image displayed
immediately after shooting.
Plus Normal Shooting
When [On] is selected for [Plus Normal Shooting] in the shooting
menu, the camera will record two copies of each photo taken in
creative shooting mode: one processed according to options selected
for creative shooting mode and a second, unprocessed copy. The
two copies are shown in the picture display after shooting, with the
unprocessed image on the right and the modified copy on the left.
To turn this option on or off, turn the mode dial to X and then select
an option for [Plus Normal Shooting] in the shooting menu.
Note ------------------------------------------------------------------------------------In the case of photographs taken with dynamic range double shot, histograms
are included for both images when the pictures are displayed after shooting.
When [LCD Confirmation Time] is set to [Hold] (GP.111), the confirmation
screen remains displayed so you can confirm the histograms and easily compare
the images.
72
Movie Mode (3)
Shooting Movies
Rotate the mode dial to 3 to record movies with
sound. Frame size can be selected using the [Movie
Size] item (GP.80) in the shooting menu. Each
movie you shoot is recorded as an AVI file.
Press the shutter release button halfway to focus
and the rest of the way down to start recording. The [O] icon
blinks while recording is in progress and the recording time and time
available are shown in the picture display. Press the shutter release
button halfway or all the way down to end recording.
• While shooting movies, operation sounds may be recorded.
• Movies may be up to 4 GB in size. The maximum length is 12 minutes for
movies recorded at a [Movie Size] of [x 1280] and 29 minutes for movies
recorded at [z 640] or [y 320]. Depending on the type of memory card used,
shooting may end before this length is reached. The maximum total length of
all movie files that can be stored depends on the capacity of the memory card
(GP.148).
• When shooting a fast-moving subject, the subject may be distorted in the
recorded image.
• Flickering may be recorded as a horizontal band when shooting under
fluorescent lights.
3
Shooting Mode Types
Caution ---------------------------------------------------------------------------------
Note ------------------------------------------------------------------------------------•
•
•
•
During recording, the zoom lever can be used for digital zoom (GP.34).
Subject tracking AF can not be used.
The camera shoots movies at 30 frames per second.
The remaining recording time may not change uniformly because it is
recalculated from the remaining memory capacity during movie recording.
• Depending on the remaining battery level, the battery may become depleted
during movie shooting. Use of a battery with adequate remaining power is
recommended.
• A Speed Class 6 memory card is recommended when recording movies with
[x 1280] selected for [Movie Size].
73
4 Playback Functions
Playing Back Movies
To play back movies, follow the steps below.
1
Select the movie you want to play
back in playback mode.
2
Press the ADJ./OK button.
• Playback begins. The elapsed
playback indicator or the elapsed time
is displayed on the screen.
Fast Forward
Rewind
Pause/Playback
Slow Playback
Slow Rewind
Next Frame
Previous Frame
Volume Adjustment
4
640
RMOV0001 0001/9999
10 :05
10:05
Start
2011/01/01 00:00
Playback Functions
Turn the zoom lever toward z during playback.
Turn the zoom lever toward Z during playback.
Press the ADJ./OK button.
Turn and hold the zoom lever toward z during pause.
Turn and hold the zoom lever toward Z during pause.
Turn the zoom lever toward z during pause.
Turn the zoom lever toward Z during pause.
Push the ADJ./OK button !" during playback.
Playing Back MP Files
When you shoot one still image with M-Cont Plus, Speed Cont, or
Multi-trgt AF, the image is recorded as one MP file. Use the following
method to play back MP files.
Note ------------------------------------------------------------------------------------• Images shot in normal continuous mode can be played back in the same way
as normal still images.
• The focus position is displayed for multi-target AF shooting.
• The grid line is displayed when shooting with the [Golf Swing Continuous
Mode] option in scene mode.
1
Display the MP file you want to
play back in playback mode.
ĵĻ ŏ
ĵĻĴ
• The MP file is displayed with the S
symbol.
74
2011/01/01 00:00
2
The display changes as follows.
Display for Step 1
• Press the DISP. button to change between “Normal” and
“No Display”.
• The images cannot be enlarged even if the zoom lever
is turned toward 8 (Enlarged View). The images are
displayed in thumbnail view.
• The other operations are the same as those for normal
still images.
Thumbnail view
• The MP file images are displayed in thumbnail view.
• Push the ADJ./OK button !"NF to select a frame.
• The DISP. button is disabled.
ĵĻ ŏ
ĵĻĴ
2011/01/01 00:00
8
ADJ./OK
9
ĵĻ ŏ
ĵĻĴ
2011/01/01 00:00
8
ADJ./OK
9
2011/01/01 00:00
ADJ./OK
4: N
4:3
Stop
2011/01/01 00:00
Displaying Slide Shows
• Images are displayed automatically in the order they
were consecutively shot, starting with the displayed
frame.
4
Playback Functions
Single frame view
• This displays the frame selected on the thumbnail view.
• Turn the zoom lever toward 8 (Enlarged View) to
display enlarged view.
ĵĻ ŏ
ĵĻĴ
• The operations during slide show are shown below.
Pause/Playback
Fast Forward
Rewind
Slow Playback
Slow Rewind
Next Frame
Previous Frame
First Frame
Last Frame
3
Press the ADJ./OK button.
Turn and hold the zoom lever toward z during playback.
Turn and hold the zoom lever toward Z during playback.
Turn and hold the zoom lever toward z during pause.
Turn and hold the zoom lever toward Z during pause.
Turn the zoom lever toward z during pause.
Turn the zoom lever toward Z during pause.
Push the ADJ./OK button N.
Push the ADJ./OK button F.
To play back files other than MP files, return to Step 1 and
push the ADJ./OK button !"NF.
75
Caution --------------------------------------------------------------------------------• The [DPOF], [Trim], [Resize], [Skew Correction] (playback mode), [Level Compensation],
and [White Balance Compensation] functions are not available for MP files.
• [Flag Function Setting] and [Protect] cannot be set for individual frames in an MP file. If
[Flag Function Setting] or [Protect] is set when the thumbnail view or single image view
is displayed, the setting will be applied to the MP file instead of an individual frame.
• The individual images in a MP file can not be deleted separately.
MP file ---------------------------------------------------------------------------------MP is a file format for recording a set of still images.
Exporting MP Files
You can extract selected frames from an MP file and save each frame as
an individual still image.
Note -------------------------------------------------------------------------------------
4
Playback Functions
•
•
•
•
The MP file is displayed with the S symbol.
The images are saved in the same sizes used for shooting.
The original files will be retained after extraction.
The focus positions for images shot using multi-target AF or the grid line using
the [Golf Swing Continuous Mode] option in scene mode will not be displayed
on extracted images.
To export MP files, display the MP file which you want to export in
playback mode, and then press the MENU button to display the
playback menu and select [Export Still Images].
If [1 Frame] is selected, you can select a
frame for export by pushing the ADJ./OK
button NF.
Select [All Frames] to export all frames in
the selected MP file.
76
Selecting Multiple Frames
If [Sel. Multiple] is selected, select multiple
individual frames or a range of frames.
To select multiple individual frames:
1
2
Select a frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a
range of frames.
• If you selected a frame by mistake, you can deselect it by selecting
the frame and pressing the ADJ./OK button.
• Select all the frames which you want to export.
Press the Fn button, select [Yes] and press the ADJ./OK
button.
To select two frames and all frames between them:
1
2
Select [Sel. Range] and press the ADJ./OK button.
3
Select the last frame and press
the ADJ./OK button.
4
Playback Functions
3
Select [Sel. Indiv.] and press the ADJ./OK button.
Select the first frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying frames
separately.
Export Still Images
6/15
15
4:3 N
• Repeat Steps 2 and 3 to select
multiple ranges.
Start
4
Execute
Press the Fn button, select [Yes] and press the ADJ./OK
button.
Note ------------------------------------------------------------------------------------[Sel. Indiv.] and [Sel. Range] can be selected directly if [Export Still Images] is
chosen in thumbnail view.
77
5 Shooting Menu
The shooting menu is used to adjust camera settings when taking
pictures. To display the shooting menu, press the MENU button when
the camera is in shooting mode.
Using the Menu
1
Press the MENU button in
shooting mode.
• The shooting menu is displayed.
• To display the shooting menu
in scene, continuous, or creative
shooting mode, push the ADJ./OK
button N to select the [MODE] tab
and then push the button " once.
2
5
Shooting Menu
78
Indicates the range of displayed
screens.
Push the ADJ./OK button !" to
select the desired menu item.
• If the DISP. button is pressed at
this point, the cursor moves to the
shooting menu tab.
• Push the ADJ./OK button " at the
bottom item to display the next
screen.
3
Push the ADJ./OK button F.
4
Push the ADJ./OK button !" to
select the setting.
5
Press the ADJ./OK button.
• The menu item settings are displayed.
• The setting is confirmed, the shooting menu disappears and the
camera is ready to shoot.
• To select the highlighted option and return to the menu shown in
Step 2, push the ADJ./OK button N.
Shooting Menu Options
Dynamic Range Expansion
GP.70
Select the dynamic range expansion effects.
Soft Focus Options
GP.68
Choose the amount of softening produced by the [Soft Focus] option in creative
shooting mode. Select from [Weak] and [Strong].
Hue
GP.68
Choose the hue of photographs created using the [Cross Process] option in creative
shooting mode. Select from [Basic], [Magenta], or [Yellow].
Caution ------------------------------------------------------------------------------
5
Shooting Menu
Depending on exposure and the option selected for white balance, [Magenta]
and [Yellow] may not produce the desired results.
Vignetting
GP.68
Choose the amount of vignetting produced by the [Toy Camera] option in creative
shooting mode. Select from [Weak], [Strong], and [Off ].
Toy Color
GP.68
Select [On] to increase saturation in photographs taken using the [Toy Camera]
option in creative shooting mode.
Plus Normal Shooting
GP.72
Record unprocessed copies of photographs taken in creative shooting mode.
Picture Quality/Size
Adjust picture quality and size when taking pictures.
j 4 : 3 F/ j 4 : 3 N 3648 × 2736
i 3 : 2 F 3648 × 2432
g 1 : 1F
2736 × 2736
g 16 : 9 F 3648 × 2048
e 4 : 3F
2592 × 1944
c 4 : 3 F 2048 × 1536
a 4 : 3F
1280 × 960
z 4 : 3 F 640 × 480
Note ---------------------------------------------------------------------------------Lower compression ratio and less image deterioration are available with F (Fine),
but the file size is larger than with N (Normal).
Shooting menu options -----------------------------------------------------------The options in the shooting menu vary with the selected shooting mode. In
scene and creative shooting modes, the options available vary with the scene or
creative shooting mode option selected. See P.140 for more information.
79
Movie Size
GP.148
Choose the movie frame size.
Density
Adjust contrast when using the [Text Mode] option in scene mode.
Size
GP.148
Choose the size of pictures taken using the [Text Mode] option in scene mode.
Focus
GP.86
Choose a focusing mode.
—
—
5
Shooting Menu
Multi AF
Measures the distances from nine AF areas and focuses to the nearest AF
area. Choose to prevent out-of-focus photos.
Face Pr. Multi
The camera automatically detects and focuses on faces. If no faces are
detected, the camera focuses using multi AF.
Subj. Tracking
The camera focuses when the shutter release button is pressed halfway and
tracks the selected subject until a picture is taken or you remove your finger
from the shutter release button (GP.86).
Spot AF
Selects one AF area at the center of the picture display to allow the camera
to focus on this area automatically.
Multi-trgt AF
Takes five consecutive pictures while shifting the focus to multiple positions.
(GP.86)
MF
Enables you to adjust the focus manually (GP.87).
Snap
Fixes the shooting distance to a short distance (approx. 2.5 m (8.2 ft.)).
∞ (Infinity)
Fixes the shooting distance to infinity. It is useful for shooting distant scenes.
Pre-AF
If [On] is selected when [Multi AF], [Face Pr. Multi], [Subj. Tracking], [Spot AF], or
[Multi-trgt AF] is selected for [Focus], the camera will continue to focus even when
the shutter-release button is not pressed halfway. This may decrease the time
needed to focus when a picture is taken, potentially improving shutter response.
80
Exposure Metering
You can change the metering method (the range to use for metering) used to
determine the exposure value.
—
Multi
The entire shooting range is divided into 256 partitions, and each is metered
to determine the overall exposure value.
Center
The entire image is metered, with emphasis on the center, to determine
the exposure value. Use this when the brightness of the center and
surroundings are different.
Spot
Only the center of the image is metered to determine the exposure value.
Use this setting when you want to use the brightness at the center. This is
useful if there is a marked difference in contrast or backlighting.
Image Settings
You can change the picture quality of an image, including the contrast, sharpness,
color and vividness.
—
5
Shooting Menu
Vivid
Take strong, vivid photos with higher contrast and sharpness and maximum
vividness.
Standard
Creates an image with normal picture quality.
Cust. Settings
You can select from five [Contrast],
[Sharpness], and [Vividness] levels.
Black & White
Creates a black and white picture.
Sepia
Creates a sepia-toned picture.
81
Super Resolution
The super resolution process applies to still images to enhance picture resolution.
Select the level from [Off ], [Weak], and [Strong] for this process. The processing
time vary depending on the selected level.
Note ---------------------------------------------------------------------------------With super resolution, the camera uses the [Auto] option for noise reduction, and
the default setting value for sharpness.
Noise Reduction
Perform noise reduction when taking photographs. Choose from [Off ], [Auto],
[Weak], [Strong], or [MAX]. The time required to record images varies with the
option selected.
Note ---------------------------------------------------------------------------------When selecting super resolution, the noise reduction option is fixed to [Auto].
Flash Exposure Compensation
You can adjust the light intensity of the flash. You can set the light intensity from
–2.0 EV to +2.0 EV in increments of 1/3 EV.
Caution ------------------------------------------------------------------------------
5
Shooting Menu
Flash exposure compensation may not work outside the flash range (GP.144).
Auto Bracket
GP.88
Vary exposure, white balance, color, or focus over a series of pictures.
Time Exposure
Use time exposures to capture fireworks as they rise into the air and explode,
to create trails of light behind cars and other moving objects, or to shoot night
scenery. Choose the exposure time from [Off ], [1 second], [2 seconds], [4 seconds],
and [8 seconds].
Note ---------------------------------------------------------------------------------• The shutter speed may slow down and images may be blurred. Hold the
camera steady by using a tripod when shooting.
• The picture display turns off while shooting.
• Long time-exposures are processed to reduce noise. The time required for
processing is roughly equivalent to the exposure time.
• ISO sensitivity is restricted to values between ISO 100 and ISO 400. If the value
currently selected by the user is between ISO 800 and ISO 3200, the camera will
automatically set ISO sensitivity to ISO 400 (GP.92).
82
Custom Self-Timer
Set the shooting interval and the number of pictures when you want to shoot
several pictures with the self-timer (GP.37).
Available Settings Description
Pictures
Set this between one and ten pictures. The default setting is
[2 Pics].
Interval
Set this between five and ten seconds. The default setting is
[5 Sec.].
Note ---------------------------------------------------------------------------------• The camera takes pictures at the specified interval; the self-timer lamp blinks for
two seconds before each shot. Focus is locked at the setting for the first shot in
the sequence.
• Press the MENU button to cancel self-timer shooting.
Interval Shooting
You can set the camera to automatically take
pictures at fixed intervals. You can set the
shooting interval from five seconds to one hour in
increments of five seconds.
5
Caution -----------------------------------------------------------------------------• The interval shooting setting is cleared when the camera is turned off.
• The time until the next picture can be taken according to the shooting menu
setting may be longer than the time set for interval shooting. If this is the case,
the shooting interval becomes longer than the set time.
Shooting Menu
Hours Minutes Seconds
Note ---------------------------------------------------------------------------------• Depending on the remaining battery level, the battery may become depleted
during interval shooting. Use of a battery with adequate remaining power is
recommended.
• If you press the shutter release button during interval shooting, the camera
shoots as usual.
• A high speed memory card or a SD memory card with sufficient memory is
recommended.
83
Camera Shake Correction
Select [On] to reduce the effects of camera shake.
Caution -----------------------------------------------------------------------------• The camera shake correction function cannot prevent movement of the
shooting subject (caused by wind, etc.).
• Results vary with shooting conditions.
Note ----------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur (GP.19).
Slow Shutter Limit
The maximum shutter speed can be limited to the following: 1/8 second,
1/4 second, and 1/2 second. When this function is set to [Off ], the maximum
shutter speed varies depending on the ISO setting.
Note ----------------------------------------------------------------------------------
5
Shooting Menu
• When time exposure is set, priority is given to time exposure.
• When scene mode is set to [Night. Port.] or [Night Landscape Multi-shot], the
maximum shutter speed for [Night. Port.] or [Night Landscape Multi-shot] is
given priority.
• When the flash is set to [Flash Synchro.], the longest shutter speed is one
second.
• When using the slow shutter limit, the light quantity may be insufficient
depending on the brightness of the subject, resulting in a dark image. In this
case, try the following:
- Selecting a greater slow shutter limit.
- Raising the ISO setting (GP.92).
- Using the flash (GP.35).
Date Imprint
You can insert the date (YY/MM/DD) or the date and time (YY/MM/DD hh:mm) at
the lower right of a still image. Select [Off ] to turn date imprint off.
Note ---------------------------------------------------------------------------------• Make the date and time settings in advance (GP.29).
• [Date Imprint] cannot be used with movies.
• The date imprinted in an image cannot be deleted.
Exposure Compensation
Choose exposure compensation.
White Balance
Adjust the white balance.
ISO Setting
Adjust ISO sensitivity.
84
GP.90
GP.91
GP.92
Maximum ISO for ISO Auto
Select the maximum value chosen by the camera when [Auto] is selected for [ISO
Setting]. Use to prevent ISO sensitivity from being raised too high.
Restore Defaults
Select [Yes] and press the ADJ./OK button to restore shooting menu settings to
their default values.
5
Shooting Menu
85
Focus
Subject Tracking AF
When you press the shutter-release button halfway, the camera will
focus on the subject in the focus frame at the center of the monitor and
a green target icon will be displayed (the target icon will be displayed in
red if the camera is unable to locate a subject to track). The camera will
track the subject while the shutter-release button is pressed halfway (if
the subject leaves the frame, the target icon will blink red and tracking
will end). Tracking ends automatically when you remove your finger
from the shutter-release button or a picture is taken.
Caution --------------------------------------------------------------------------------The camera may be unable to track subjects that are fast moving or poorly lit.
5
Multi-Target AF
Shooting Menu
When you half-press the shutter release button, the camera
automatically determines multiple focus positions. When you then
press the shutter release button all the way down, the camera shifts
among the different focus positions, taking five consecutive pictures.
The five still images are grouped together as a set and are recorded as
an MP file. This function is especially useful for telephoto shooting and
shooting with macro mode.
A V icon will be displayed if the camera
is able to focus. If the camera is unable
to focus, the V icon will blink. The focus
positions selected by the camera are only
displayed during playback (GP.74).
86
( +51
MP file ---------------------------------------------------------------------------------MP is a file format for recording a set of still images.
Caution --------------------------------------------------------------------------------• The flash cannot be used.
• The [Time Exposure] setting is disabled (GP.82).
• The camera shake correction function cannot be used. If [Multi-trgt AF] is set
while the camera shake correction function is turned on, E changes to F.
Note ------------------------------------------------------------------------------------• If this function is turned on when using the digital zoom, the digital zoom is
disabled and shooting is performed at the maximum magnification for the
optical zoom (10.7 ×).
• [White Balance] functions according to the [Auto] setting even if it is set to
[Multi-P AUTO].
Manual Focus (MF)
Manual focus (MF) can be used to focus
at a selected distance when the camera is
unable to focus using autofocus. A focus
bar is displayed in the picture display.
9999
4: F
4:3
5
1
Press and hold the ADJ./OK button as required.
2
3
Adjust the zoom position with the zoom lever as required.
4
Press the shutter release button to shoot the picture.
• Pressing and holding the ADJ./OK button increases the
magnification only at the center of the screen.
• Pressing and holding the ADJ./OK button again returns from
enlarged view to normal view.
Shooting Menu
Hold:
Push the ADJ./OK button !" to adjust the focus.
• Pushing the ADJ./OK button ! adjusts the focus to farther objects
and pushing the ADJ./OK button " adjusts the focus to closer
objects.
Note ------------------------------------------------------------------------------------You can also use manual focus to focus on objects within the macro shooting
range.
87
Auto Bracketing
Choose the type of bracketing performed.
Note ------------------------------------------------------------------------------------Assigning [AT-BKT], [WB-BKT], [CL-BKT], or [FOCUS-BKT] to the Fn (Function)
button with [Set Fn Button] allows you to switch between on and off by pressing
the Fn button (GP.55).
Auto Bracket
If [On] is selected, the camera will
take three photos each time the
shutter-release button is pressed: one
underexposed by 0.5 EV, a second at
current exposure settings, and a third
overexposed by 0.5 EV.
Recording
An icon is displayed when [On] is selected.
Note -------------------------------------------------------------------------------------
5
Shooting Menu
• The exposure compensation can be changed using the shooting menu
(GP.90).
• [White Balance] functions according to the [Auto] setting even if it is set to
[Multi-P AUTO].
White Balance Bracketing (WB-BKT)
The white balance bracket function
automatically records three images—a
reddish image, a bluish image, and an
image of the current white balance.
Recording
Red
Blue
An icon is displayed when [WB-BKT] is
selected.
Note ------------------------------------------------------------------------------------• The white balance can be changed using the shooting menu (GP.91).
• If [Image Settings] is set to [Black & White] or [Sepia], the white balance bracket
function can be set but it does not operate.
88
Color Bracketing (CL-BKT)
With color bracketing, three images, a
black-and-white, a color, and a sepia
image, are recorded.
An icon is displayed when [CL-BKT] is
selected.
Recording
Sepia
B&W
Contrast, Sharpness and Vividness During Color Bracket Shooting ----During color bracket shooting, the contrast, sharpness, and vividness values set
in [Image Settings] are applied. However, the values for [Standard] in [Image
Settings] are applied when [Image Settings] is set to [Black & White] or [Sepia].
Focus Bracketing (FOCUS-BKT)
Choose this option to automatically vary focus by a selected amount
over a series of five photographs.
1
2
Select [FOCUS-BKT] and push the ADJ./OK button F.
• The symbol appears on the screen.
3
Half-press the shutter release button.
4
Press the shutter release button
all the way down.
• The camera focuses according to the [Focus] setting.
5
Shooting Menu
Push the ADJ./OK button NF to choose the focus interval
and then press the ADJ./OK button twice.
Recording
• The camera takes five consecutive
pictures based on the focus position
in Step 3.
FAR
NEAR
89
Note ------------------------------------------------------------------------------------• When [Focus] is set to [MF], the first picture is taken at the set focus position
without being measured.
• [White Balance] functions according to the [Auto] setting even if it is set to
[Multi-P AUTO].
• Photographs are taken and recorded in the following order:
Fore
5
5
➝
Focus position
Shooting order
Recording order
4
4
Center*
1
3
➝
3
2
Back
2
1
* Focus set using the option currently selected for [Focus] (GP.80).
Exposure Compensation
Use exposure compensation to vary exposure from the value selected
by the camera. Choose from values between –2 and +2; negative
values produce darker pictures, positive values brighter pictures.
Exposure compensation may be required in the following situations:
For backlighting
5
When the background is particularly bright, the subject will appear
dark (underexposed). In this case, set the exposure level higher (+).
Shooting Menu
When your subject is whitish
The entire picture will turn out dark (underexposed). Set the exposure
level higher (+).
When your subject is darkish
The entire picture will turn out bright (overexposed). Set the exposure
level lower (–). The same happens when you take a photo of a subject
in a spotlight.
Push the ADJ./OK button !" to choose
a exposure value and press the ADJ./OK
button. The selected value is displayed in
the picture display.
ĵĻ Ň
ĵĻĴ
Note -------------------------------------------------------------------------------------
90
[Q] is displayed if the subject is too bright or too dark for exposure
compensation.
White Balance
Adjust the white balance so that a white subject will appear white. At
purchase, the white balance mode is set to [Multi-P AUTO]. Change
the setting in situations where the white balance is difficult to adjust
effectively, such as when shooting an object of a single color or when
shooting under multiple light sources.
5
Shooting Menu
AUTO Auto
Adjusts the white balance automatically.
Multi-P AUTO
The camera automatically selects the optimal white balance according to the
conditions of sun and shade or the flash illumination range.
Outdoors
Select this when shooting outdoors (sunny) and white balance fails to adjust
properly.
Cloudy
Select this when shooting in cloudy weather or shade and the white balance
fails to adjust properly.
Incandescent 1
Select this when shooting under incandescent light and white balance fails to
adjust properly.
Incandescent 2
Select this when shooting under incandescent light (more reddish, compared
with [Incandescent 1]).
Fluorescent
Select this when shooting under fluorescent light and white balance fails to
adjust properly.
Manual
Adjust the white balance manually.
Note ------------------------------------------------------------------------------------• The white balance may not be adjusted correctly for a subject that is mostly
dark. In this case, add something white to the subject.
• When shooting with the flash, the white balance may not be adjusted correctly
if [Auto] is not selected. In this case, switch to [Auto] to shoot with the flash.
91
Manual
1
2
Select [Manual].
Frame a piece of paper or other white object under the lighting
that will be used in the final photograph and press DISP.
• The white balance is set.
3
Press the ADJ./OK button.
• The symbol appears on the screen.
• The effect of the selected white balance setting can be previewed in
the picture display. Repeat the above steps until the desired effect is
achieved.
Note ------------------------------------------------------------------------------------To cancel [Manual], select a setting other than [Manual].
ISO Setting
5
Shooting Menu
ISO sensitivity indicates how sensitive film is to light. A greater value
means higher sensitivity. High sensitivity is suitable for shooting an
object in a dark place or a fast-moving object while minimizing
blurring. When ISO setting is set to [Auto], the camera automatically
changes the sensitivity according to the distance, brightness, zoom,
macro settings, and picture quality/size. Choose settings other than
[Auto] to fix ISO sensitivity at the selected value.
The upper limit for auto ISO sensitivity can
be selected using the [Maximum ISO for
ISO Auto] in the shooting menu (GP.85).
If ISO sensitivity is assigned to the ADJ./OK
button (GP.52), the upper limit for auto
ISO sensitivity can be chosen by pressing
the DISP. Button when [Auto] is selected.
Note -------------------------------------------------------------------------------------
92
• When [Auto] is selected for ISO sensitivity, the camera will select an ISO
sensitivity between 100 and the value selected for [Maximum ISO for ISO Auto].
• If the flash is set to [Auto], the flash will fire if optimal exposure can not be
achieved at the sensitivity selected for [Maximum ISO for ISO Auto].
• Images shot with a higher sensitivity may appear grainy.
• When [Auto] is selected for ISO sensitivity, the ISO value displayed when the
shutter release button is pressed halfway may in some instances (for example,
when the flash is used) differ from the value selected when the shutter is released.
6 Playback Menu
The options in the playback menu can be used to perform a variety of
operations on existing pictures. To display the playback menu, select
playback mode and press the MENU button.
Using the Menu
1
2
Press the 6 (Playback) button to select the playback mode.
3
Press the MENU button.
Push the ADJ./OK button !"NF to display the desired file.
• For [Flag Function Display] (GP.94), [Slide Show] (GP.95), [Copy
to Card from Internal Memory] (GP.95), or [Recover File] (GP.95),
skip this step.
• The playback menu appears.
Indicates the range of displayed
screens.
Push the ADJ./OK button !" to
select the desired item.
• If the DISP. button is pressed at
this point, the cursor moves to the
playback menu tab.
• Push the ADJ./OK button " at the
bottom item to display the next
screen.
5
6
Playback Menu
4
Push the ADJ./OK button F.
• The screen for the selected menu item appears.
93
Playback Menu Options
Flag Function Setting
GP.96
Flag up to 20 files for quick access.
Flag Function Display
Displays images flagged with [Flag Function Setting]. Fn button can be used for the
same purpose.
Note ---------------------------------------------------------------------------------The file set to [Flag Function Setting] with the smallest file number is displayed.
Export Still Images
GP.76
Export selected images from a MP file.
Resize
Create resized copies of photos or other still images produced with the camera.
Original
j 4 : 3 F/ j 4 : 3 N/ i 3 : 2 F/ g 1 : 1 F/ g 16 : 9 F/
e 4 : 3 F/ c 4 : 3 F/ b 4 : 3 F/ b 4 : 3 N
a 4 : 3F
Resized
a 4 : 3 F/z 4 : 3 F
z 4 : 3F
Caution -----------------------------------------------------------------------------Movies or MP files cannot be resized.
6
Playback Menu
94
Trim
GP.97
This function allows you to trim a still image you have shot and then save it as a
separate file.
Level Compensation
GP.100
Create copies of photographs with modified brightness and contrast.
White Balance Compensation
GP.102
Create copies of photographs with modified white balance.
Skew Correction
GP.103
Create copies that have been processed to reduce the effects of perspective on
rectangular objects.
Change Grid Point
GP.60
Change grid settings for [Golf Swing Continuous Mode] in scene mode.
Protect
GP.104
Protect images from accidental deletion.
Slide Show
You can display the recorded still images and movie files sequentially on the screen.
Note ---------------------------------------------------------------------------------• Each still image is displayed for three seconds.
• For movies and MP files, all the images you shot are played back.
Copy to Card from Internal Memory
Copy all data from internal memory to a memory card in a single operation.
Note ---------------------------------------------------------------------------------• If there is not enough space available on the destination memory card, a
warning will be displayed. Select [Yes] to copy only those files for which there is
sufficient space.
• It is not possible to copy the contents of an SD memory card to the internal
memory.
• When the contents of the internal memory are copied to an SD memory card,
the files saved to [Flag Function Setting] in the internal memory are canceled.
DPOF
GP.106
Select pictures for printing.
Recover File
Restore deleted files.
Caution ------------------------------------------------------------------------------
6
Playback Menu
Deleted files cannot be restored after performing any of the following operations.
• Turning the camera off
• Switching from playback mode to shooting mode
• Using DPOF, Resize, Copy to Card from Internal Memory, Skew Correction,
Level Compensation, White Balance Compensation or Trim
• Files with DPOF settings are deleted
• Internal memory or SD memory card is initialized
• Setting or canceling files for [Flag Function Setting]
• Changing the magnification ratio or magnified area of files for [Flag Function
Setting]
• Exporting MP files using [Export Still Images]
95
Flag Function Setting
Flag images for quick access during playback. Flagged images can be
displayed by pressing the Fn button.
Setting/Canceling One File at a Time
To flag or remove flag marking from the current image, select [Flag
Function Setting] in single-image playback. Flagged files are indicated
by an icon.
Note ------------------------------------------------------------------------------------If an enlarged still image is set, the magnification ratio and magnified area are
saved and the enlarged image can be displayed as is.
Setting/Canceling Multiple Files at One Time
To flag or remove flag marking from
multiple selected images, select [Flag
Function Setting] in thumbnail view,
highlight images, and press the ADJ./OK
button to add or remove flag marking.
Press DISP. when the operation is
complete.
6
Playback Menu
96
Flag Func. Set.
Finish
9/12
12
4:3 F
Sel/Cancel
Caution --------------------------------------------------------------------------------• If the name of the file set to [Flag Function Setting] is changed using a
computer, the file is canceled from [Flag Function Setting].
• Copying images from internal memory to a memory card removes flag marking
from the images in internal memory.
• When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO]
folder and CLIP.CLI file are created on the SD memory card. If these are deleted,
the corresponding file is canceled from [Flag Function Setting].
• If the name of an image file is changed using a computer, the file may not be
able to be set to [Flag Function Setting].
• Only images taken using this camera can be set to [Flag Function Setting].
Trim
Create a cropped copy of the current photograph.
Turn the zoom lever toward 8 or 9 to
adjust the crop size and push the ADJ./OK
button !"NF to position the crop.
Press the ADJ./OK button to save the cropped image to a separate file.
Caution --------------------------------------------------------------------------------• You can only trim still images shot using this camera.
• You cannot trim movies or MP files.
• While you can trim an image repeatedly, the image is recompressed each time
and there will be some decline in image quality.
Note -------------------------------------------------------------------------------------
6
Playback Menu
• To cancel, press the DISP. button.
• To view help, press the Fn button while the crop display is shown in the picture
display. Press the Fn button again to exit help.
• To choose the aspect ratio, press the D button in the crop display. Choose from
aspect ratios of 4 : 3 and 1 : 1. Aspect ratios of 3 : 2 and 16 : 9 are not supported.
• If an image is trimmed, the compression ratio changes to Fine.
• The available settings for the trimming frame size differ depending on the
original image size.
97
• The size of the image after cropping depends on the size of the original and
the size of the crop (the first crop shown in the trimming display is the second
largest crop; to display the largest crop, select 9 with the zoom lever).
Aspect ratio 4 : 3
Original image size
j 4 : 3 F/ j 4 : 3 N
(3648 × 2736)
i 3 : 2F
(3648 × 2432)
g 1 : 1F
(2736 × 2736)
6
g 16 : 9 F
(3648 × 2048)
Playback Menu
e 4 : 3F
(2592 × 1944)
c 4 : 3F
(2048 × 1536)
b 4 : 3 F/ b 4 : 3 N
(1728 × 1296)
a 4 : 3F
(1280 × 960)
z 4 : 3 F/ z 4 : 3 N
(640 × 480)
98
Trimming level
1
2, 3
4 to 6
7 to 9
10 to 13
1
2, 3
4 to 6
7 to 9
10 to 13
1, 2
3 to 5
6 to 8
9 to 12
1, 2
3 to 5
6 to 8
9 to 12
1
2, 3
4 to 7
8 to 12
1, 2
3 to 6
7 to 10
1
2 to 5
6 to 9
1 to 3
4 to 8
Trimmed image size
3072 × 2304
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
3072 × 2304
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2048 × 1536
1280 × 960
640 × 480
1728 × 1296
1280 × 960
640 × 480
1280 × 960
640 × 480
1 to 4
640 × 480
Aspect ratio 1 : 1
Original image size
j 4 : 3 F/ j 4 : 3 N
(3648 × 2736)
i 3 : 2F
(3648 × 2432)
g 1 : 1F
(2736 × 2736)
g 16 : 9 F
(3648 × 2048)
e 4 : 3F
(2592 × 1944)
c 4 : 3F
(2048 × 1536)
Trimmed image size
2304 × 2304
1536 × 1536
960 × 960
480 × 480
2304 × 2304
1536 × 1536
960 × 960
480 × 480
2304 × 2304
1536 × 1536
960 × 960
480 × 480
1536 × 1536
960 × 960
480 × 480
1536 × 1536
960 × 960
480 × 480
1536 × 1536
960 × 960
480 × 480
960 × 960
480 × 480
960 × 960
480 × 480
1 to 4
480 × 480
6
Playback Menu
b 4 : 3 F/ b 4 : 3 N
(1728 × 1296)
a 4 : 3F
(1280 × 960)
z 4 : 3 F/ z 4 : 3 N
(640 × 480)
Trimming level
1 to 3
4 to 6
7 to 9
10 to 13
1, 2
3 to 5
6 to 9
10 to 13
1 to 3
4 to 6
7 to 9
10 to 13
1 to 3
4 to 7
8 to 11
1 to 3
4 to 7
8 to 11
1, 2
3 to 6
7 to 10
1 to 4
5 to 8
1 to 3
4 to 8
99
Level Compensation
Create copies that have been processed to adjust brightness and
contrast.
Correcting Images Automatically
Select [Auto] and push the ADJ./OK
button F. A preview will be displayed
with the original image at upper left and
the corrected copy on the right.
Level Compensation [Auto]
Press the ADJ./OK button to copy the
image.
Ok
Cancel
Correcting Images Manually
Select [Manual] and push the ADJ./OK
button F. A preview will be displayed
with the original image at upper left, a
histogram and black-, mid-, and whitepoint controls at lower left, and the
corrected copy on the right.
Help
MENU:
MEN
Chng. Points
Ok
Cancel
Control points
6
Playback Menu
Press MENU to cycle through the control points
and push the ADJ./OK button NF to position
the selected point for enhanced brightness and
contrast as described below.
Point
Black
point
Midpoint
White
point
100
Level Compensation [Manual]
Effect
If the image is overexposed, move the black
point to the right until it lines up with the
darkest pixel in the histogram.
To make the image brighter, move the midpoint to the right. Moving the mid-point to
the left makes the image darker.
If the image is underexposed, move the
white point to the left until it lines up with
the brightest pixel.
Black
point
White
point
Mid-point
• To increase contrast, align the black point and white point with the
darkest and brightest pixels.
• For help, press the Fn button; press the button again to return to the
preview display.
Press the ADJ./OK button to create the corrected copy.
Caution --------------------------------------------------------------------------------• If the camera can not create a corrected copy, an error message will be
displayed and the camera will exit to the playback menu.
• To cancel level compensation, press the DISP. button.
• You can only use level compensation for still images shot using this camera.
• You cannot use level compensation for movies or MP files.
• This function may not have any effect for images shot using [Text Mode] in scene
mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia].
• While you can use level compensation repeatedly, the image is recompressed
each time and there will be some decline in image quality.
6
Playback Menu
101
White Balance Compensation
Create copies with modified white
balance.
White Balance Compensation
A preview will be displayed with the
original image at upper left, white
balance controls at lower left, and the
corrected copy on the right. Push the
ADJ./OK button !"NF to adjust white
balance on the Green-Magenta and BlueAmber axes.
Press the ADJ./OK button in to record the
modified copy.
Cancel
Help
Ok
Green
Amber
Magenta
Blue
Caution ---------------------------------------------------------------------------------
6
• You can only use white balance compensation for still images shot using this
camera.
• You cannot correct the white balance for movies or MP files.
• This function may not have any effect for images shot using [Text Mode] in scene
mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia].
• While you can use white balance compensation repeatedly, the image is
recompressed each time and there will be some decline in image quality.
Playback Menu
• To cancel, press the DISP. button.
• Press the D button to reset white balance.
• For help, press the Fn button; press the button again to return to the preview
display.
102
Note -------------------------------------------------------------------------------------
Skew Correction
Create copies that have been processed to reduce the effects of
perspective on rectangular objects, such as message boards or
business cards.
Caution --------------------------------------------------------------------------------• You can only use skew correction for still images shot with this camera.
• You cannot use skew correction for movies or MP files.
Note -------------------------------------------------------------------------------------
Image Size
j 4 : 3F
j 4 : 3N
i 3 : 2F
g 1 : 1F
g 16 : 9 F
Correction time
Approx. 23 seconds
Approx. 22 seconds
Approx. 17 seconds
Approx. 13 seconds
Approx. 13 seconds
Image Size
e 4 : 3F
c 4 : 3F
a 4 : 3F
z 4 : 3F
Correction time
Approx. 12 seconds
Approx. 8 seconds
Approx. 3 seconds
Approx. 1 seconds
6
Playback Menu
• If the camera is able to detect an object that can be used to correct perspective,
a message will be displayed with the object shown by an orange frame. The
camera can detect up to five objects.
• If the target area cannot be detected, an error message appears. The original
image remains unchanged.
• To select another correction area, move the orange frame to the target area by
pushing the ADJ./OK button F.
• To cancel skew correction, push the ADJ./OK button !. Even if you cancel skew
correction, the original image remains unchanged.
• The image size does not change for skew corrected images.
• The time for skew correction increases with image size. To reduce the time
required, perform skew correction on small copies created with the [Resize]
option (GP.94).
• The following table shows the approximate time required for skew correction.
• When scene mode is set to [Skew Correct Mode], you can shoot an image and
then immediately correct any skew in the image (GP.63).
103
Protect
[Protect] allows you to protect files from
being accidentally deleted.
If [1 File] is selected, you can protect or
unprotect the file selected by pushing the
ADJ./OK button NF.
If [Select All] or [Cancel All] is selected, you
can protect or unprotect all files.
Selecting Multiple Files
Select [Sel. Multiple] to change the protect status of multiple
individual files or of all files in a selected range.
To select multiple individual frames:
1
2
Select [Sel. Indiv.] and press the ADJ./OK button.
3
Press the Fn button.
6
Playback Menu
104
Select a frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a
range of files.
• If you selected a file by mistake, you can deselect it by selecting the
file and pressing the ADJ./OK button.
• Select all files you want to protect.
To select two frames and all frames between them:
1
2
Select [Sel. Range] and press the ADJ./OK button.
Select the first frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying files
separately.
• If you make a mistake when selecting the starting point for the range
of files, press the DISP. button to return to the screen for selecting
the starting point.
3
Select the last frame and press
the ADJ./OK button.
Protect
Last File
4:33 F
• Repeat Steps 2 and 3 to select
multiple ranges.
4
Press the Fn button.
Start
Execute
Note ------------------------------------------------------------------------------------[Sel. Indiv.] and [Sel. Range] can be selected directly if [Protect] is chosen in
thumbnail view.
Caution --------------------------------------------------------------------------------Note that formatting deletes all files, including protected files.
6
Playback Menu
105
DPOF
To request professional prints of the
photographs on a memory card, first use
this option to create a digital “print order”
listing the photos you wish to print and
the number of prints, and then take the
memory card to a digital print service
center that supports the DPOF standard.
To add a photo to or remove it from the print order, select [1 File] and
push the ADJ./OK button NF to display the desired file.
Select [Select All] to add all photos to the print order, or [Cancel All] to
remove all files from the print order.
Selecting Multiple Files
6
Playback Menu
106
To change the print status of multiple individual files, select [DPOF] in
thumbnail view.
Select photos and push the ADJ./OK button !" to choose the
number of prints; push the ADJ./OK button ! to increase the number
of copies, or push the ADJ./OK button " to decrease the number of
copies.
Press the ADJ./OK button to exit when settings are complete.
Note ------------------------------------------------------------------------------------To remove the DPOF settings for multiple still images, follow the same steps
described above to set the number of copies to print to [0] for each image, and
then press the ADJ./OK button.
Viewing Pictures on TV
To view pictures on a TV, connect the camera using the supplied AV
cable.
1
Securely connect the AV cable to the Video Input Terminal (yellow)
Video In terminal on the television.
• Connect the white plug of the AV cable
to the audio input terminal (white) of the
TV unit and the yellow plug to the video
input terminal (yellow).
2
Turn the camera off and securely
Audio Input Terminal (white)
connect the cable to the common
terminal for USB port/AV output (gray) of the camera.
3
Set the television to Video mode (Set the input to Video).
4
Press the POWER button, or press and hold the 6
(Playback) button to turn the camera on.
• For details, see the documentation that came with the television.
Caution ---------------------------------------------------------------------------------
6
Playback Menu
• Always connect the dedicated cable to the common terminal for USB port/AV
output and the HDMI micro output terminal respectively. Using other cables
to connect or connecting to the terminal other than specified can result in
malfunction.
• When the AV cable is connected to the camera, the picture display and the
speaker output turn off.
• Do not force the AV cable into the terminal.
• Do not apply excessive force with the AV cable connected.
• When using the AV cable, do not move the camera with the AV cable.
107
Note ------------------------------------------------------------------------------------• You can connect the AV cable to the Video In terminal on your video recorder
and record what you have shot to a video recorder.
• The camera supports the following video standards: NTSC and PAL. Where
possible, the camera is set to the standard used in your country or region before
shipment; before connecting the camera to a device that uses a different video
standard, choose the appropriate video mode (GP.114).
• The camera body can be connected to TVs that support HDMI using an HDMI
cable (optional). See the documentation provided with TVs for details.
• If connecting or disconnecting the HDMI cable in multi-frame views of the
playback mode, the display switches to single frame view. When the menu
is displayed, it will not switch to single-frame view even if connecting or
disconnecting the HDMI cable.
• When connecting the camera body to a TV using a HDMI cable, the operational
sounds turn off.
• The resolution for HDMI output is set to [AUTO]. If the video resolution actually
shown on the display is low, change the [HDMI Output] settings in the setup
menu (GP.114).
6
Playback Menu
108
7 Setup Menu
You can change the camera settings by displaying the setup menu
from the shooting menu (GP.78) or playback menu (GP.93).
Using the Menu
1
Press the MENU button.
2
3
Push the ADJ./OK button N.
4
Push the ADJ./OK button F.
5
Push the ADJ./OK button !" to
select the desired item.
• The shooting menu (or the playback menu) appears.
Push the ADJ./OK button ".
• The setup menu appears.
• In scene, continuous, or creative
shooting mode, push the button
" twice.
6
Push the ADJ./OK button F.
7
Push the ADJ./OK button !" to
select the setting.
• The menu item settings are displayed.
7
Setup Menu
• If the DISP. button is pressed at this
point, the display returns to the
screen shown in Step 3.
• Push the ADJ./OK button " at the
bottom item to display the next
screen.
Indicates the range of displayed
screens.
109
8
Press the ADJ./OK button.
• The setup menu disappears and the camera is ready for shooting or
playback.
• The setup menu may appear depending on the setting. In this
case, press the MENU button or the ADJ./OK button to return to the
shooting or playback screen.
• Pushing the ADJ./OK button N in Step 8 confirms the setting and
the display returns to the screen shown in Step 5.
Note ------------------------------------------------------------------------------------For some functions, the setting selection method may differ from what is
explained here. For detailed operation, see the explanation of each function.
Setup Menu Options
Format [Card]
Select [Yes] and press the Fn button to format the memory card.
Caution ------------------------------------------------------------------------------
7
Setup Menu
110
When using Eye-Fi cards, install the software in the Eye-Fi card to your computer
and then format the card.
Format [Internal Memory]
Select [Yes] and press the Fn button to format internal memory. If you have images
in the internal memory that you do not want to delete, copy the images to the SD
memory card before formatting the internal memory (GP.95).
LCD Brightness
Push the ADJ./OK button !" to adjust the brightness of the picture display.
Reg. My Settings
GP.115
Save current camera settings.
Step Zoom
Select [On] to allow optical zoom to be adjusted in eight discrete steps that on a 35mm camera would be equivalent to focal lengths of 28 mm, 35 mm, 50 mm, 85 mm,
105 mm, 135 mm, 200 mm, and 300 mm; select [On] to allow super resolution zoom
to be adjusted in two discrete steps that on a 35-mm camera would be equivalent
to focal lengths of 450 mm, and 600 mm. In macro mode, the step zoom focal
lengths are roughly equivalent to 31, 35, 50, 85, 105, 135, 200 and 300 mm on a
35-mm camera.
Set Fn Button
GP.56
Choose the role performed by the Fn button.
ADJ Button Setting 1–4
Choose the role performed by the ADJ./OK button.
AF Auxiliary Light
If [On] is selected, the AF auxiliary light will light to assist autofocus.
Operation Sounds
Choose the sounds made by the camera.
Available Settings
All
Level Sound
Shutter Sounds
GP.52
Description
All sounds on.
Only the level sound is emitted.
Only the shutter sound and level sound are emitted.
Note ---------------------------------------------------------------------------------• If you try to perform an operation that cannot be performed, the beep sound is
emitted regardless of the [Operation Sounds] setting.
• Regardless of the option selected, no sound is emitted when [Discreet Mode]
or [Pets] is selected in scene mode.
Volume Settings
The operation sound volume can be changed.
Note ----------------------------------------------------------------------------------
7
Setup Menu
• When [Volume Settings] is set to [………] (Mute), the level sound is not
emitted even when [Level Setting] is set to [Display+Sound] or [Sound].
• Regardless of the option selected, no sound is emitted when [Discreet Mode]
or [Pets] is selected in scene mode.
LCD Confirmation Time
Choose how long photos are displayed after shooting. Choose [Hold] to display
photos until the shutter release button is pressed halfway. Photos displayed after
shooting can be viewed using zoom (GP.41) or deleted (GP.42). Depending
on the option selected for [Noise Reduction] (GP.82), photos may be displayed
longer than the time selected.
Auto Power Off
Choose how long the camera remains on when no operations are performed.
The camera will not turn off automatically if [Off ] is selected, during interval timer
photography (GP.83), or when the camera is connected to a computer or printer,
or while transferring images using Eye-Fi cards.
111
LCD Auto Dim
If [On] is selected, the picture display will automatically dim to save power if no
operations are performed for about five seconds. This feature is not available in
synchro-monitor mode (GP.45) or sleep mode (GP.114).
Digital Zoom Image
GP.117
Choose [Auto Resize] to record pictures taken with digital zoom at actual size,
[Normal] to enlarge image data from the center of the frame using both the digital
zoom and the super resolution zoom.
Level Setting
GP.48
Adjust level indicator and level sound settings.
Grid Guide Display Options
GP.45
Choose the type of framing grid available in shooting mode.
Available Settings Description
A three-by-three grid for “rule of thirds” composition.
A four-by-four grid with diagonal lines running from corner
to corner makes it easy to find the center of the subject. Use
for architectural photography or photographing products for
display.
A two-by-two grid with the center of the frame left clear to
make it easier to view the subject. Use if your subject is in
motion.
7
Setup Menu
112
Function Guide
If [On] is selected, help will be displayed when you turn the mode dial or use
controls such as the F (flash), N (macro), and t (self-timer) buttons.
Shooting Info. Display Frame
Select [On] to display shooting icons in a frame
surrounding the view through the lens (GP.45).
Shooting information display frame cannot be used
in movie mode.
ĵĻ Ň
ĵĻĴ
Minimum Distance
Select [Show] to display the minimum focus distance for the current zoom position.
The minimum focus distance is not displayed in scene auto mode.
Auto Rotate
Select [On] to automatically display pictures in the correct orientation during
playback.
White Saturation Display
GP.47
If [On] is selected, highlights can be viewed in playback mode by pressing the DISP.
button.
Card Sequence No.
When you switch SD memory cards, you can set your camera to continue
consecutive numbering from the previously loaded card.
Available Settings Description
On (Continue
Files names consist of “R” followed by a seven-digit number (e.g.,
numbering)
“R0010001.jpg”), assigned in ascending order from 0010001 to
9999999. When a new memory card is inserted, file numbering
continues from the last number used.
Off (Do not
File numbering is assigned, from RIMG0001.jpg to RIMG9999.
continue
jpg, for each SD memory card. When the file name reaches
numbering)
RIMG9999, no more data can be recorded to that card.
Note ---------------------------------------------------------------------------------• This option applies only to memory cards. The names of photos in internal
memory consist of “RIMG” and a four-digit number.
• When images are transferred to a computer using DL-10 (GP.128), the file
being transferred is renamed and saved.
Caution ------------------------------------------------------------------------------
Setup Menu
When the file name reaches RIMG9999 or R9999999, no more files can be saved.
In this case, move image data from the SD memory card to the memory of the
computer or a storage medium, and then format the SD memory card.
USB Connection Type
Choose a connection type ([Mass Storage] or [PTP]) before connecting the camera
to other devices via USB.
7
113
Date Settings
Set the camera clock.
GP.29
Note ---------------------------------------------------------------------------------• If the battery is removed for more than one week, the date and time settings
will be lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining
power for more than two hours.
Language/N*1
GP.29
You can change the language displayed on the screen.
Video Out Mode*1
You can view your still images and movies on a television screen by connecting
your camera to a television with the AV cable that came with your camera. Select
from NTSC (used in North America, the Caribbean, parts of Latin America, and some
East Asian countries) and PAL (used in the United Kingdom and much of Europe,
Australia, New Zealand, and parts of Asia and Africa). SECAM is not supported.
HDMI Output
You can select the resolution from [AUTO], [1080i], [720p], and [480p] for video
output using the optional HDMI cable, For normal use, choose the [AUTO] option.
If the video resolution actually shown on the display is low with the [AUTO] option,
choose [1080i] or [720p] to achieve the better possible quality.
Sleep Mode
Choose how long the picture display remains lighted before it will automatically
dim to save power. This feature is not available during the connection using AV
cable or HDMI cable.
Note ----------------------------------------------------------------------------------
7
Setup Menu
With Sleep Mode set, [LCD Auto Dim] option is not available.
Confirm Firmware Version
Display the firmware version of the camera. When the SD memory card contains the
file for updating the firmware, the camera rewrites the program.
Eye-Fi Connection Settings*2
When using the SD memory card with wireless LAN function built-in (i.e., Eye-Fi
card), the [On] option turns wireless LAN function on; the [Off ] option turns
wireless LAN function off and the SD memory card can be used without wireless
LAN function. For more information on wireless LAN settings or Eye-Fi cards, please
check the user manual, etc. for the devices using Eye-Fi cards.
Eye-Fi Connection Display*2
When the Eye-Fi card is in use, display the destination SSID.
*1 The default setting varies depending on where you purchased the camera.
*2 These settings are only displayed when using Eye-Fi card.
114
Reg. My Settings
Save current camera settings in [MY1] or [MY2]. Settings saved in [MY1]
are recalled when the mode dial is rotated to T , those saved in
[MY2] when the mode dial is rotated to U.
1
2
Set the camera to the desired settings.
Select [Reg. My Settings] in the setup menu (GP.109) and
push the ADJ./OK button F.
• A confirmation message appears.
3
Select [MY1] or [MY2] and press the ADJ./OK button.
• The current camera settings are registered and the display returns to
the setup menu.
• If you do not want to register them, press the DISP. button.
Settings Saved in [Reg. My Settings]
Time Exposure
Custom Self-Timer
Camera Shake Correction
Slow Shutter Limit
Date Imprint
Exposure Compensation
White Balance
ISO Setting
Step Zoom
Digital Zoom Image
Level Setting
Grid Guide Display Options
Function Guide
Shooting Info. Display Frame
Minimum Distance
USB Connection Type
Zoom position
Macro
Flash Mode
Self-Timer
DISP. mode
7
Setup Menu
Shooting mode (scene auto mode excluded)
Focus position for manual focus
Dynamic Range Expansion
Soft Focus Options
Hue
Vignetting
Toy Color
Plus Normal Shooting
Picture Quality/Size
Density
Pre-AF
Focus
Exposure Metering
Image Settings
Super Resolution
Noise Reduction
Flash Exposure Compensation
Auto Bracket
WB-BKT
CL-BKT
FOCUS-BKT
115
Exposure Time ([Fireworks] in scene
mode)
Brightness/Color ([Cooking] in scene
mode)
7
Setup Menu
116
Grid Settings Value ([Golf Swing
Continuous Mode] in scene mode)
Digital Zoom Image
If [Normal] (the default option) is selected for [Digital Zoom Image] ,
digital zoom will enlarge image data from the center of the frame to
create a picture at the current image size, creating a slightly grainy
image. To record pictures taken with digital zoom at actual size, select
[Auto Resize]. The size at which the image will be recorded varies with
the zoom ratio.
To use auto resize zoom, hold the zoom
lever at z (Telephoto) until the camera is
zoomed all the way in, then briefly release
the zoom lever and turn it to z again.
ĵĻ Ň
ĵĻĴ
Image size changes each time the zoom
lever is turned to z. The current size is
displayed above the zoom bar.
The auto resize zoom is enabled when j 4 : 3 F or j 4 : 3 N is selected
for [Picture Quality/Size] (GP.79), and the digital zoom is enabled in
other cases.
Zoom Magnification and Recorded Image Size
Zoom Magnification
1.0 ×
1.4 ×
1.8 ×
2.9 ×
5.7 ×
Focal Length*
300 mm
420 mm
530 mm
850 mm
1710 mm
* Equivalent to that on a 35 mm camera
Caution ---------------------------------------------------------------------------------
7
Setup Menu
Picture Quality/Size
j 4 : 3 F/ j 4 : 3 N
e 4 : 3F
c 4 : 3F
a 4 : 3F
z 4 : 3F
• [Auto Resize] has no effect when [Skew Correct Mode] is selected in scene
mode or [Toy Camera] is selected in creative shooting mode.
• Fine picture quality is used for all photographs recorded using [Auto Resize],
regardless of the option currently selected for [Picture Quality/Size].
117
8 Direct Printing
About the Direct Print Function
The Direct Print standard enables direct printing from a camera to a
printer by connecting them via a USB cable. Photos can be printed
quickly and easily from your digital camera without using a computer.
Caution --------------------------------------------------------------------------------You cannot print AVI files (movies) or MP files with this function.
Note ------------------------------------------------------------------------------------• This camera uses PictBridge, an industry standard for Direct Printing.
• Your printer must be compatible with PictBridge to use the Direct Print
function. For support information, see the documentation that came with the
printer.
Connecting the Camera to a Printer
Connect your camera to a printer using the USB cable provided.
Direct Printing
8
1
2
Make sure that the camera power is off.
Connect the common terminal
for USB port/AV output of your
camera (gray) to a printer using
the USB cable provided.
• Turn on the printer if it is not
already on.
• Your camera turns on
automatically.
Caution --------------------------------------------------------------------------------• Do not force the USB cable into the terminal, or apply excessive force with the
USB cable connected. Also, when using the USB cable, do not move the camera
with the USB cable.
• Do not disconnect the USB cable with the camera power on.
• Do not connect other cable other than the USB cable provided.
118
Printing Still Images
You can print still images from the camera with a PictBridgecompatible printer. If a memory card is inserted, the pictures will be
printed from the memory card; otherwise pictures will be printed from
internal memory.
Caution --------------------------------------------------------------------------------After making sure that the printing completes and the camera turns off,
disconnect the USB cable to end the connection between the camera and the
printer.
Note ------------------------------------------------------------------------------------• If a [Printer error.] message appears during image transfer, check the printer
status and take the appropriate action.
• If a computer connection message appears even though the camera is
connected to the printer, reconnect the camera and press the ADJ./OK button
within two seconds.
• Before connecting to some printers, you may need to select [PTP] for [USB
Connection Type] (GP.113) in the setup menu (GP.109).
Printing One or All Still Images
1
2
Direct Printing
Before printing, connect the camera to
the printer. The message [Connecting...]
shown at right will be displayed if the
printer is ready; press ADJ./OK to view the
Direct Print playback display.
8
Select an image for printing and press the ADJ./OK button.
Select [1 File] or [All Files] and press the ADJ./OK button.
• The Direct Print menu appears.
119
3
Select an item and push the ADJ./OK button F to view the
options available.
• When [Connecting…] is displayed, the connection to the
printer is not yet established. When a connection is established,
[Connecting…] disappears and [Direct Print] appears. Proceed with
this step after the connection is established.
• The following items can be selected. Each item is available only
when supported by the printer connected to the camera.
Item Name
Paper Size
Paper Type
Layout
Direct Printing
8
Description
Sets the paper size.
Sets the paper type.
Sets the number of images printed on a sheet of paper.
The number of images that can be laid out on a sheet of
paper varies depending on the connected printer.
Date Print
Selects whether to print the date (shooting date). The
date format can be set using the date/time option in the
setup menu. If the picture was taken using [Date Imprint]
(GP.84), only the imprinted date will be printed.
File Name Print
Selects whether to print the file name.
Optimize Image Selects whether to optimize the image data (still image)
prior to printing on the printer.
Print Size
Sets the print image size.
Print Quality
Sets the print quality.
Report Print*
Prints on forms.
Printing Quantity Sets the print quantity.
Toner Saving*
Selects whether to conserve toner by using less ink
during printing.
1-Side/2-Sides*
Selects whether to print on both sides of the paper.
During duplex printing, one copy is printed for each still
image. Only one copy is printed even if you selected
more than one copy to print in Step 3 on P.122.
* Each item is available only when supported by the Ricoh printer connected
to the camera.
120
Note ------------------------------------------------------------------------------------• To specify the settings as the default settings
next time the camera is connected to the
printer, press the MENU button when the
screen in Step 3 is displayed. Select [Yes] in
the display at right and press the ADJ./OK
button.
• To use the settings last set the next time the
camera is connected to the printer, select [No].
4
Select an option and press the ADJ./OK button.
5
Press the ADJ./OK button.
• The display returns to the Direct Print menu.
• Repeat Steps 3 and 4 to change other settings as required.
• The selected still images are sent to the printer and the [Sending…]
screen appears.
• Pressing the DISP. button cancels the operation.
• When the images have been sent to the printer, the display returns
to the Direct Print playback mode screen and printing starts.
Direct Printing
8
121
Printing Several Still Images
1
Turn the zoom lever toward 9 (Thumbnail View) to display
the thumbnail view.
2
3
Select an image and press the ADJ./OK button.
Push the ADJ./OK button !" to
set the number of copies to print.
• Push the ADJ./OK button ! to
increase the number of copies,
or push the ADJ./OK button " to
decrease the number of copies.
• Repeat Steps 2 and 3 to select
additional images.
Prnt Fil
Last File
4:33 F
1
Forward
4
Press the ADJ./OK button.
5
Select an item and push the ADJ./OK button F to view the
options available.
• The Direct Print menu appears.
• See Steps 3 and following on P.120.
Direct Printing
8
122
Note ------------------------------------------------------------------------------------• Only images with a printer symbol ( p ) are printed. If you cancel printing and
then try to print again, make sure that the printer symbol is on the images you
want to print.
• The same still image can also be printed several times on a single sheet.
• The available items vary depending on the functions of the printer.
• To print images using the printer’s default settings, select [Printer Select] on the
detailed options screen.
9 Downloading Images to Your Computer
The screen images shown here may differ from the images displayed
on your computer depending on your computer OS.
For Windows
You can copy pictures to your computer with or without DL-10
software, which is available in the internal memory of the camera.
The following software are installed with the DL-10 installation.
Software
DL-10
MediaBrowser
Description
Downloads images collectively to your computer.
Display, manage, and edit existing images.
Caution ---------------------------------------------------------------------------------
System Requirements for Using the Built-in Software
The following environments are necessary for using the built-in
software. Please check your computer, or the computer's user manual.
Operating Systems
Supported
CPU
Memory
Windows XP Home Edition Service Pack 3/Professional Service Pack 3
Windows Vista Service Pack 2
Windows 7 (32- and 64-bit)
Pentium® IV: 1.6 GHz or faster
Pentium® M: 1.4 GHz or faster
Core™ 2 Duo: 1.5 GHz or faster
Windows XP: 512 MB or more
Windows Vista/Windows 7: 1 GB or more
300 MB or more
Hard drive space
required for installation
Display Resolution
1024 × 768 pixels or greater
Display Colors
65,000 colors or greater
USB Port
A USB port compatible with the above-mentioned computer
Downloading Images to Your Computer
• Administrator privileges are required for installation.
• DL-10 is not network-compatible. Use as a stand-alone application.
9
123
Caution --------------------------------------------------------------------------------• Windows XP 64-bit and Windows Vista 64-bit are not supported.
• If your computer has an upgraded OS, the USB function may not work normally,
so it will not be supported.
• The provided software may not operate properly if changes are made to the
operating system, such as with patches and service package releases.
• The camera does not support connection to a USB port added by using an
extension function (PCI bus or other).
• If used in conjunction with a hub or other USB devices, the software may not
work properly.
• When dealing with movies and other large files, a larger memory environment
is recommended.
Installing Software
Install the supplied software to your computer.
Downloading Images to Your Computer
9
124
Caution --------------------------------------------------------------------------------• Before proceeding, confirm that [Mass Storage] is selected for [USB Connection
Type] (GP.113) in the setup menu (GP.109).
• If you install the DC Software 2 with the DC Software having been already
installed, DL-10 for the DC Software 2 is added to the Start-up folder.
1
Turn the camera power off, and pull the SD memory card
out of the camera.
• With SD memory card in the camera, the software cannot be
installed.
2
3
Connect the supplied USB cable to the computer.
Connect the USB cable to the
common terminal for USB port/
AV output of the camera (gray).
• The camera turns on automatically
when a connection is established.
• [RICOHDCI(E:)] screen is displayed
(E indicates the drive name).
4
Click [Start the digital camera
software installer], and then click the
[OK] button.
• [Digital camera software installer] screen
appears.
Windows 7
• Click [Open folder to view files] and
double-click [AUTORUN.EXE] from the
displayed files.
Use this button to install software
required for batch downloading
and editing of images.
Click this to display the Website
for user registration.
Click [Installing the software].
6
Select a language and follow the on-screen instructions to
complete installation.
Windows XP
• After a while, the [Choose Setup Language] screen appears.
Windows Vista/Windows 7
• If a [User Account Control] dialog is displayed, select [Yes]
(Windows 7) or [Allow] (Windows Vista). If an icon appears on the
task bar, click the icon to display the dialog. After a short pause, the
[Choose Setup Language] dialog will be displayed.
• The MediaBrowser installer will start. To install MediaBrowser, accept
the license agreement and follow the on-screen instructions.
7
Click [Unblock] for DL-10.
Downloading Images to Your Computer
5
9
• For Windows 7, click [Allow access].
125
8
When a message appears asking you to restart your
computer, select [Yes, I want to restart my computer now.]
and then click [Finish].
• Your computer will restart automatically.
• After your computer restarts, a Windows security warning message
appears.
Caution --------------------------------------------------------------------------------• Do not force the USB cable into the terminal, or apply excessive force with the
USB cable connected. Also, when using the USB cable, do not move the camera
with the USB cable.
• Do not disconnect the USB cable with the camera power on.
• Do not connect other cable other than the USB cable provided.
Uninstalling the Software ---------------------------------------------------------
Downloading Images to Your Computer
9
126
• DC Software 2 and MediaBrowser can be uninstalled from [Control Panel] >
[Programs and Features] (Windows 7 and Windows Vista; in category or home
view, select [Control Panel] > [Programs] > [Uninstall a program]), or [Add or
Remove Programs] (Windows XP).
• Administrator privileges are required.
• Quit any other programs that may be running before uninstalling the software.
• If you uninstall the DC Software 2 with the DC Software and the DC Software 2
have been already installed, DL-10 added to the Start-up folder can be deleted.
Viewing Software Manual
In the internal memory of the camera, “Software User Guide” (PDF file)
is available. This guide explains how to download images from the
camera to your computer. To view the guide, copy the guide onto your
computer.
1
Open [My computer] with the camera connected to the
computer.
• The internal memory of the camera appears as the drive.
2
Open [MANUAL] folder.
3
Copy the PDF file for your language directly to your hard
disk.
• Each language has its own “Software User Guide” (PDF file).
Note -------------------------------------------------------------------------------------
Downloading Images to Your Computer
• Adobe Reader is required to display the operation manual (PDF file). Acrobat
Reader or Adobe Reader need to be installed from the Adobe website if not
installed on your computer.
• When the DL-10 Software has already been installed from the camera, select
[Start] > [DC Software 2] > [Adobe Reader Download] to display the website for
downloading.
• For details about Adobe Reader, see Help for Adobe Reader.
9
127
Copying Pictures to Your Computer
Follow the steps below to copy pictures to your computer.
Caution --------------------------------------------------------------------------------To copy pictures stored in the SD memory card, insert the card first and then
connect the camera to the computer.
1
Connect the common terminal
for USB port/AV output of the
camera (gray) to the computer
using the supplied USB cable.
• Turn the camera off before
connecting the USB cable.
• The camera turns on automatically when a connection is established.
2
Downloading Images to Your Computer
9
128
Copy photos to the computer.
If DL-10 is installed:
• DL-10 starts and image transfer begins automatically.
• Pictures are copied to the [Digital Camera] folder in [My Documents],
where they are sorted into separate folders by date of recording. See
the “Software User Guide” (PDF file) for more information.
If DL-10 is not installed:
• Copy files from the camera to the
desired location.
• When an SD memory card is
loaded, its files are displayed.
Otherwise, files in the internal
memory are displayed.
• When [Digital camera software
installer] screen appears, click [×].
Example of the display
in Windows XP
3
Disconnect the USB cable when transfer is complete.
• Click the [Safely Remove Hardware] or
[Unplug or Eject Hardware] icon in the
taskbar (the illustration above shows the icon for Windows XP) and
select [Safely Remove USB Mass Storage Device] or [Stop USB Mass
Storage Device] from the menu that appears. You can then
disconnect the USB cable.
• If the remove hardware icon is not displayed
in Windows 7, click the button in the
taskbar.
Caution --------------------------------------------------------------------------------Do not turn off the camera or disconnect the USB cable during image transfer.
Note -------------------------------------------------------------------------------------
Downloading Images to Your Computer
• “MediaBrowser” image viewing and editing software (for Windows only) is
also included in the internal memory of the camera. You can download the
information on how to use MediaBrowser from the displayed “Help”.
• For the latest information about MediaBrowser, access the Web page of Pixela
Co., Ltd. (http://www.pixela.co.jp/oem/mediabrowser/e/).
9
129
For Macintosh
This camera supports the following Macintosh operating systems.
• Mac OS X 10.1.2 to 10.6.4
Caution --------------------------------------------------------------------------------• VM-1 software and the “Software User Guide” (PDF file) can be used on
Macintosh computers.
• In the internal memory of the camera, “Software User Guide” (PDF file) is
available. To view the guide, copy the guide onto your computer. See P.127 for
more information.
System Requirements for Using the Built-in Software
The following environments are necessary for using the built-in
software. Please check your computer, or the computer’s user manual.
Downloading Images to Your Computer
9
130
Operating Systems Supported Mac OS X 10.4 to 10.6.4
Macintosh computer
Apple Inc. Macintosh Series
Internal Memory
Mac OS X 10.4 256 MB or more
Mac OS X 10.5 512 MB or more
Mac OS X 10.6 1GB or more
Hard Disk Available Memory 5 MB or more
Note ------------------------------------------------------------------------------------VM-1 supports Japanese, English, French and Chinese (Simplified).
Copying Pictures to Your Computer
Follow the steps below to copy pictures to your computer.
Caution --------------------------------------------------------------------------------To copy pictures stored in the SD memory card, insert the card first and then
connect the camera to the computer.
1
Connect the common terminal
for USB port/AV output of the
camera (gray) to the computer
using the supplied USB cable.
• Turn the camera off before
connecting the USB cable.
• The camera turns on automatically when a connection is established.
Copy photos to the computer.
3
Disconnect the USB cable when transfer is complete.
• Copy files from the camera to the
desired location.
• When an SD memory card is
loaded, its files are displayed.
Otherwise, files in the internal
memory are displayed.
• Drag the camera volume into the Trash and then disconnect the USB
cable.
Downloading Images to Your Computer
2
9
131
Caution --------------------------------------------------------------------------------• Do not turn off the camera or disconnect the USB cable during image transfer.
• You can also click [Eject] on the [File] menu to cancel the connection.
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed. Be sure to stop the connection
before removing the USB cable.
• When you connect your camera to a Macintosh computer, a file called “FINDER.
DAT” or “.DS_Store” may be created in your SD memory card, which will appear
as [Unmatched File] on your camera. You can delete this file from the SD
memory card if you wish.
Using the MP File Viewer
When you shoot one still image with M-Cont Plus, Speed Cont, or
Multi-trgt AF, the image is recorded as one MP file.
Downloading Images to Your Computer
9
132
By using the VM-1 MP file viewer, you can play back MP files on your
Macintosh computer and export still images.
This section explains how to install and uninstall the VM-1 software.
For details on how to play back MP files on your computer or export
still images from MP files using the MP file viewer, see the “Software
User Guide” (PDF file).
Installing Software
Caution --------------------------------------------------------------------------------Before proceeding, confirm that [Mass Storage] is selected for [USB Connection
Type] (GP.113) in the setup menu (GP.109).
1
Turn the camera power off, and pull the SD memory card
out of the camera.
• With SD memory card in the camera, the software cannot be
installed.
2
Connect the common terminal
for USB port/AV output of the
camera (gray) to the computer
using the supplied USB cable.
• When a connection is established,
the camera turns on automatically
and the internal memory of the
camera appears as the [RICOHDCI] drive.
3
Double-click [RICOHDCI], [MAC], [MAC_DATA.DMG], and
[VM1 installer.pkg].
• The [Install VM-1] window is displayed.
4
Follow the on-screen instructions to complete installation.
Deleting (Uninstalling) VM-1 -----------------------------------------------------
Downloading Images to Your Computer
• Double-click [Applications], [Utilities], [VM-1 Utility], and [VM-1 Uninstaller] and
follow the on-screen instructions.
• If you have any other software applications running or data that has not been
saved, quit the other software applications and save the data before uninstalling
the software.
• If an error occurs during the uninstallation process, update your Mac OS to the
latest version.
9
133
10 Appendices
Troubleshooting
Error Messages
If an error message is displayed on the screen, check the information
on the reference page and take the corresponding action.
Error Message
Insert card.
Set date.
The file number limit has been
exceeded.
Unmatched File
Insufficient memory. Continue?
Protected
Card Is Write-Protected.
Print settings cannot be applied
to this file.
Insufficient Memory
Format internal memory.
Format card.
Card Error
Appendices
10
Writing Data
No File
Out of memory. cannot record.
No files to restore.
Can not —. *
Cause and Solution
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Use another card.
Refer to
P.27
P.114
P.114
This file cannot be displayed on the camera. Check the file
contents on your computer, and then delete the file.
All the files cannot be copied because there is insufficient
memory on the card. Use another card.
The file selected for deletion is protected.
The card is locked (write-protected). Unlock the card.
This file (movie or other file) cannot be selected for
printing.
Files cannot be stored. Make sure there is sufficient
memory or delete unwanted files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
The internal memory requires formatting.
The card is not formatted. Format the card with this
camera.
SDXC cards can not be used. If the card is not an SDXC card,
format the card; if the message persists, the card may be
faulty and should not be used.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The number of remaining shots is 0. Switch to another card
or the internal memory.
There are no files to restore.
Selected option can not be applied to image more than
once, or image was created with different make of camera.
If image was created with different make of camera,
process image using original make of camera.
—
* “—“ indicates the name of the process that can not be applied.
134
—
P.104
P.25
—
P.42,
P.110
P.122
P.110
P.110
P.110
—
—
P.25
P.95
—
Camera Troubleshooting
Power Supply
Problem
The camera does not
turn on.
Cause
The battery is exhausted or not
inserted.
An unacceptable battery is used.
The camera is automatically
turned off by auto power off.
The battery is loaded in wrong
direction.
Because the camera overheated,
the power was automatically
turned off.
The camera turns off
during use.
Camera malfunction
A (manganese dry cell or other)
unacceptable battery is used.
Battery has reached the end of its
useful life.
It is being used at extreme high or
low temperatures.
Many shots are being taken in
dark places or other location
requiring extensive use of flash.
Refer to
P.27,
P.26
P.23
Load correctly.
P.27
P.28
Wait until the temperature of
—
the camera returns to normal. Do
not attempt to cool the camera
suddenly.
Turn the camera back on.
P.28
Charge the rechargeable battery.
Use the dedicated rechargeable
battery. Never use any other
battery.
Remove the battery and load
it again.
Use the dedicated rechargeable
battery. Never use any other
battery.
P.26
P.23
P.27
P.23
Replace with a new rechargeable P.27
battery.
—
—
—
—
Appendices
The camera does not
turn off.
The battery has been
fully charged, but:
• The battery symbol is
displayed, indicating
a low battery level.
• The camera turns off.
Cannot charge the
battery.
Battery runs out
quickly.
The camera was left unattended
and unused, so auto power off
turned it off.
Battery is exhausted.
An unacceptable battery is used.
Solution
Load the rechargeable battery
correctly, or charge the battery.
Use the dedicated rechargeable
battery. Never use any other
battery.
Turn the camera back on.
10
135
Shooting
Problem
The camera does not
shoot even if you press
the shutter release
button.
Appendices
10
136
Cause
Battery is exhausted.
The camera is not on.
Solution
Charge the rechargeable battery.
Press the POWER button to turn
the camera on.
The camera is in playback mode. Press the 6 (Playback) button
to select the shooting mode.
The shutter release button is not Press the shutter release button
pressed all the way.
all the way.
The SD memory card is not formatted. Format the card.
The SD memory card is full.
Load a new card, or delete
unwanted files.
The SD memory card has reached Load a new SD memory card.
the end of its useful life.
The flash is charging.
Wait until the flash mode symbol
stops blinking.
The SD memory card is locked.
Unlock the card.
The contact surface of the SD
Wipe with a soft, dry cloth.
memory card is dirty.
Unable to view the shot The image confirmation time is
Lengthen the image
image.
too short.
confirmation time.
Images do not appear The camera is not on, or the
Turn the camera on, or adjust the
on the picture display. picture display is dark.
brightness of the picture display.
The VIDEO/AV cable is connected. Disconnect the VIDEO/AV cable.
The screen display is in synchroPress the DISP. button to change
monitor mode.
the display.
Although the camera
The lens is dirty.
Wipe clean with a soft, dry cloth.
is set to auto focus, it is The subject is not in the center of Shoot with focus lock.
unable to focus.
the shooting range.
It is a hard-to-focus subject.
Shoot with focus lock or manual
focus.
Although the camera is The camera incorrectly focused
Shoot with macro mode, or move
not in focus, the green because the distance to the
away from the subject.
frame appears in the
subject is too close.
center of the picture
display.
The picture is blurred. You moved the camera when
Hold camera in both hands with
(The J symbol
pressing the shutter release
your elbows pressed lightly
appears.)
button.
against your torso.
Use a tripod.
Use the camera shake correction
function.
When shooting in a dark place
Use the flash.
(such as indoors), the shutter
Raise the ISO setting.
speed slows down and pictures
Use the camera shake correction
become easily blurred.
function.
Refer to
P.26
P.28
P.28
P.30
P.110
P.27,
P.42
P.27
P.35
P.25
—
P.111
P.28,
P.110
—
P.45
—
P.30
P.30,
P.87
P.34
P.30
P.84
P.35
P.92
P.84
Problem
The flash does not fire.
Or, the flash cannot
charge.
Cause
The flash cannot be used in the
following cases:
• In bracket shooting
• In continuous mode
• In movie mode
• In discreet mode
• In pets mode
In some scene modes, the flash is
disabled by default.
The flash is set to flash off.
Battery is exhausted.
The distance to the subject
exceeds the flash range.
Solution
To shoot with the flash, change
the settings or mode.
P.35
P.26
P.92
P.90
P.82
P.35,
P.82
P.90
P.82
P.110
P.35
P.90
P.82
P.110
P.91
P.45
Appendices
Cancel Flash Off.
Charge the rechargeable battery.
Get closer to your subject and
Even though the flash
fired, the picture
shoot. Change the flash mode or
is dark.
the ISO setting.
The subject is dark.
Correct the exposure. (Exposure
compensation also changes the
light intensity of the flash.)
The light intensity of the flash is
Adjust the light intensity of
not appropriate.
the flash.
The image is too bright. The light intensity of the flash is
Adjust the light intensity of
not appropriate.
the flash. Alternatively, move
a little away from the subject
or illuminate the subject with
another light source instead of
using the flash.
Subject is overexposed. (The [!AE] Correct the exposure.
symbol appears.)
Cancel exposure time.
The brightness of the picture
Adjust the brightness of the
display is not appropriate.
picture display.
The image is too dark. The shot was taken in a dark place Cancel Flash Off.
while set to flash off.
The subject is underexposed. (The Correct the exposure.
[!AE] symbol appears.)
Set the long exposure time.
The brightness of the picture
Adjust the brightness of the
display is not appropriate.
picture display.
The image lacks natural The picture was shot in conditions Add a white object to the
color.
that made it difficult for auto
composition, or use a white
white balance to adjust the white balance setting other than auto.
balance.
The date or recording
The screen display function is set Press the DISP. button to change
information does not
to no display.
the display.
appear on the screen.
The brightness of the
Ambient lighting is poor or differs This is normal.
picture display changes from that used for autofocus..
during AF.
Refer to
P.59,
P.140
10
—
137
Problem
The level indicator is
not displayed.
Cause
[Level Setting] is set to [Off] or
[Sound].
The display is set to a setting other
than normal symbol display or
histogram.
The camera is upside down (The
shutter release button is on the
bottom).
The image is tilted even You shot the image while moving,
though it was shot with such as on a amusement ride.
the level indicator in
The subject is not level.
the middle or while
the level sound was
sounding.
Self timer lamp does
[Discreet Mode] or [Pets] is
not light.
selected in scene mode.
Solution
Set [Level Setting] to [Display] or
[Display+Sound].
Press the DISP. button to change
the display to normal symbol
display or histogram.
Hold the camera correctly.
Refer to
P.48
Shoot in an environment that is
not moving.
Check the subject.
—
Choose another mode.
P.59,
P.60
P.45
—
—
Playback/Deleting
Problem
Cannot play back, or the
playback screen does
not appear.
The contents of the SD
memory card cannot
be played back, or the
playback screen does
not appear.
Appendices
Cause
The camera is not in playback
mode.
The HDMI/AV cable is not
connected properly.
The [Video Out Mode] setting is
incorrect.
No SD memory card is loaded, or
an SD memory card with no stored
images is loaded.
You played back an SD memory
card that was not formatted with
this device.
You played back an SD memory
card that was not recorded
normally.
The contact surface of the SD
memory card is dirty.
There is something wrong with
the SD memory card.
10
The picture display
turned off.
138
Battery is exhausted.
The camera was left unattended
and unused, so auto power off
turned it off.
Solution
Refer to
Press the 6 (Playback) button. P.37
Connect properly.
P.107
Set it to the correct format.
P.114
Load a card with stored images.
—
Load a card that was formatted
and recorded with this device.
P.27,
P.110
Load a normally recorded card.
P.27
Wipe with a soft, dry cloth.
—
Play back images from another —
card and if there is nothing
wrong with the card, the camera
is okay. There may be something
wrong with the card, so do
not use it.
Charge the rechargeable battery. P.26
Turn the camera back on.
P.28
Problem
Part of the screen
flashes in black.
A file cannot be
deleted.
Cannot format the SD
memory card.
Cause
Solution
The screen is highlighted due to an It is recommended that you shoot
overly bright area.
another image while avoiding
direct sunlight and setting the
exposure level lower (–).
The file is protected.
Unprotect the file.
The SD memory card is locked.
Unlock the card.
The SD memory card is locked.
Unlock the card.
Refer to
P.47,
P.90
P.104
P.25
P.25
Other Problems
Problem
Cannot load the SD
memory card.
The camera does not
operate even when the
buttons are pressed.
Cause
The card is facing the wrong way.
Solution
Load correctly.
Refer to
P.27
Battery is exhausted.
Camera malfunction
Charge the rechargeable battery.
Press the POWER button to turn
the camera off, and then press
the POWER button to turn the
camera on again.
Remove the battery and load
it again.
Set the correct date/time.
If the battery is removed for
more than one week, the date
setting will be lost. Make the
settings again.
Set the time for auto power off.
P.26
P.28
The date is incorrect.
The set date
disappeared.
The correct date/time are not set.
The battery was removed.
Auto power off does
not work.
The operation sound
cannot be heard.
Auto power off is set to [Off].
The [Video Out Mode] setting is
incorrect.
The AV cable is not connected.
The TV is not correctly set to
VIDEO IN.
Choose another mode.
Use [Volume Settings] to set
the volume to a setting other
than mute.
Set it to the correct format.
Connect the AV cable properly.
Check that the TV is correctly set
to VIDEO IN.
P.114
P.114
P.111
P.59,
P.60
P.111
P.114
P.107
—
Appendices
Images do not appear
on the TV.
[Discreet Mode] or [Pets] is
selected in scene mode.
The operation sound volume is
turned off.
P.27
10
139
Available Settings
The following table lists the settings available in each shooting mode.
R
5 3
Shooting Menu
N (Macro) *1
F (Flash)
t (Self-timer) *5
Digital Zoom
Dynamic Range Expansion
Soft Focus Options
Vignetting
Toy Color
Hue
Plus Normal Shooting
Picture Quality/Size
Movie Size
Density
Size
Focus
Multi AF *8
Face Pr. Multi *10
Subj. Tracking
Spot AF
Multi-trgt AF *11
AF
MF
Snap
∞
Pre-AF *12
Exposure Metering
Image Settings
Noise Reduction
Super Resolution
Flash Exposure Compensation
Auto Bracket *14
Time Exposure *15
Appendices
10
140
*1
*2
*3
*4
*5
*6
*7
*8
*9
✓
✓
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
✓ *7
—
—
—
—
—
—
—
✓
—
—
✓
✓
—
✓
—
—
—
—
✓
✓
—
—
—
—
—
—
—
✓
—
—
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
—
—
—
—
—
✓
—
—
✓
—
—
—
—
—
—
—
—
—
—
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
—
—
—
—
—
✓
—
—
✓
—
—
—
—
—
—
—
—
—
—
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
—
—
—
—
—
X
✓
—
—
✓
—
—
—
—
—
—
—
—
—
—
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
—
—
—
—
—
✓
—
—
✓
—
—
—
—
—
—
—
—
—
—
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
—
—
—
—
—
✓ ✓
— ✓
✓ ✓
— ✓
✓ —
— —
— —
— —
— —
✓ ✓
✓ ✓
— —
— —
— —
✓ ✓
— —
— —
✓ ✓
— —
— —
✓ —
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ *13 ✓ *13
✓ —
✓ —
— ✓
— —
— —
[Focus] is set to [Spot AF]. Disabled when [MF] is selected for [Focus].
Only [Anti Red-eye] or [Flash Synchro.] can be selected.
[Anti Red-eye] is not available.
Only [Flash Off ] or [Auto] can be selected.
Self-timer disabled when [Interval Shooting] is in effect. [Custom Self-Timer] is not available
when [Focus] is set to [Multi-trgt AF] or [Subj. Tracking].
Only digital zoom (1280: up to 2.8 ×; 640 or 320: up to 4.0 ×) can be used.
Only [ a 4 : 3 F] or [ z 4 : 3 F] is available.
[Spot AF] used when digital zoom is in effect.
Available, but menu is not displayed and setting can not be changed.
✓
✓
✓
✓
—
—
—
—
—
✓
✓
—
—
—
✓
—
—
✓
—
—
—
✓
✓
✓
✓
—
—
—
✓
—
—
4
X
✓
✓
✓
✓
—
—
—
—
✓
✓
✓
—
—
—
✓
—
—
✓
—
—
—
✓
✓
✓
✓
—
—
—
✓
—
—
✓
✓
✓
✓
—
—
✓
✓
—
✓
✓
—
—
—
✓
—
—
✓
—
—
—
✓
✓
✓
✓
✓ *13
—
—
✓
—
—
—
✓
✓
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
—
—
✓
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
✓ *9
—
—
—
✓
—
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓ *2
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
—
✓
—
—
—
✓
✓
✓
—
—
✓
—
—
—
—
—
—
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓
—
—
✓
—
—
—
✓
✓
✓
—
—
✓ *9
—
—
—
—
—
—
✓
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓ *9
✓ *3
✓
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
✓
—
—
✓
✓
—
—
—
—
—
—
—
✓
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
—
✓
—
—
—
✓
✓
✓
—
—
—
—
✓
—
—
—
—
✓
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
✓
—
—
—
—
—
—
—
—
—
—
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
—
—
—
—
—
✓
✓
✓
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
✓
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
—
✓
—
—
—
✓
✓
✓
—
—
✓
—
✓
—
—
✓
✓
✓
✓
—
—
—
—
—
—
✓ *8
—
—
—
✓
—
—
✓
—
—
—
—
—
✓
✓
✓
—
—
✓
—
—
✓
✓
✓
✓
—
—
—
—
—
—
—
—
✓
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓ *4
✓
✓
—
—
—
—
—
—
✓
—
—
—
✓ *9
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
*10 Camera selects optimal white balance; no icon is displayed. Equivalent to multi-pattern auto if
no face is detected.
*11 The flash cannot be used. The custom self-timer is not available. Digital zoom, [Time Exposure],
[Custom Self-Timer], [Interval Shooting], and [Camera Shake Correction] are disabled. [Auto] is
used for [White Balance].
*12 Not available when [MF], [Snap],or [∞] is selected for [Focus].
*13 Only [Color], [Black & White] or [Sepia] can be selected.
*14 The flash turns off automatically and [Time Exposure] and [Subj. Tracking] are disabled. Not
available when [Focus] is set to [Multi-trgt AF].
*15 [Camera Shake Correction] is disabled.
Appendices
✓
✓
✓
✓
—
✓
—
—
—
✓
✓
—
—
—
✓
✓
—
✓
—
—
—
✓
✓
✓
✓
✓ *13
—
—
✓
—
—
SAUTO
10
141
5 3
Shooting Menu
Setup Menu
Appendices
10
142
Custom Self-Timer
Interval Shooting *16
Camera Shake Correction *17
Slow Shutter Limit
Date Imprint
Exposure Compensation
White Balance *18 Multi-P AUTO
Other than those above
ISO Setting
Maximum ISO for ISO Auto
Restore Defaults
Step Zoom
Set Fn Button *19 Macro Target *20
Step Zoom
AE Lock
AF/Face Pr.
AF/Subj.Trckng
AF/Multi Trgt
AF/MF
AF/Snap
AT-BKT
WB-BKT
CL-BKT
FOCUS-BKT
ADJ Button Setting Off
1–4
Exposure Comp.
White Balance
ISO
Quality
Focus
Image
Expo. Metering
Auto Bracket
Flash Comp.
Density
Digital Zoom Image
Grid Guide Display Options
Minimum Distance
White Saturation Display
Other than those above
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
✓
R
X
— — — — — — ✓ ✓ ✓
— — — — — — ✓ ✓ ✓
— — — — — — ✓ ✓ ✓
— ✓ — — — — — ✓ ✓
— ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— — — — — — ✓ ✓ —
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ —
— ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— — — — — — — — —
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21 ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21 ✓
— *21 ✓ ✓ ✓ ✓ ✓ ✓ — *21 ✓
✓ ✓ ✓ ✓ ✓ ✓ — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 ✓ ✓ ✓ ✓ ✓ ✓ — *21 — *21
— *21 ✓ ✓ ✓ ✓ ✓ ✓ — *21 ✓
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— *21 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21
— *21 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ — *21 — *21 — *21 — *21 ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— *21 ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21
— *21 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
— *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ ✓
— — — — — — — — —
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
*16 When the self-timer is set, [Interval Shooting] and [Subj. Tracking] are disabled. Not available
when [Focus] is set to [Multi-trgt AF].
*17 Not available if [Focus] is set to [Multi-trgt AF] or when using [Time Exposure].
*18 Not available when [Image Settings] is set to [Black & White] or [Sepia].
X
4
—
—
✓ *9
—
✓
—
✓ *9
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
✓
—
—
—
✓
*19 The Fn button can not be used to perform the selected function when [Miniaturize] is selected
in creative shooting mode, or when [Fireworks], [Cooking], or [Golf Swing Continuous Mode] is
selected in scene mode.
*20 Not available when [Subj. Tracking] or [Face Pr. Multi] is selected for [Focus].
*21 Can be assigned but can not be used.
*22 [Auto Resize] has no effect.
Appendices
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — ✓ ✓ — ✓
✓ ✓ ✓ — — ✓ — — — — — — — — — — —
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ *9 — ✓ ✓ ✓ — ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ — — ✓ ✓ ✓ — ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — — ✓ ✓ ✓ ✓ ✓ ✓ —
✓ ✓ ✓ — ✓ ✓ ✓ ✓ — — ✓ ✓ — ✓ ✓ ✓ —
✓ ✓ ✓ — ✓ ✓ ✓ ✓ — — ✓ ✓ ✓ ✓ ✓ ✓ —
✓ ✓ ✓ ✓ — ✓ — — — ✓ — ✓ ✓ ✓ — ✓ —
✓ ✓ ✓ ✓ — ✓ — — — ✓ — ✓ ✓ ✓ — ✓ —
— — — — — ✓ — — — — — — — — — — —
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21 — *21 ✓ ✓ — *21 ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21 — *21 ✓ ✓ — *21 ✓ ✓ ✓ ✓
✓ — *21 — *21 — *21 — *21 ✓ ✓ — *21 — *21 — *21 ✓ — *21 — *21 — *21 ✓ — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21
✓ ✓ ✓ — *21 — *21 ✓ ✓ ✓ — *21 — *21 ✓ — *21 — *21 — *21 ✓ — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21 — *21 ✓ ✓ ✓ ✓ ✓ ✓ — *21
✓ ✓ ✓ — *21 ✓ ✓ ✓ ✓ — *21 — *21 ✓ ✓ ✓ ✓ ✓ ✓ — *21
✓ ✓ ✓ ✓ — *21 ✓ — *21 — *21 — *21 ✓ — *21 ✓ ✓ ✓ — *21 ✓ — *21
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ — *21 ✓ ✓ ✓ — *21
✓ ✓ ✓ — *21 — *21 ✓ ✓ ✓ — *21 ✓ ✓ — *21 ✓ ✓ ✓ ✓ — *21
✓ — *21 ✓ — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 ✓ ✓ — *21 ✓ — *21
✓ ✓ ✓ — *21 — *21 ✓ — *21 — *21 — *21 ✓ — *21 — *21 ✓ ✓ — *21 ✓ — *21
— *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21 — *21 — *21 — *21 — *21 ✓ — *21 — *21 — *21
✓ ✓ ✓ ✓ — *21 ✓ — *21 — *21 — *21 — *21 ✓ — *21 — *21 ✓ ✓ ✓ — *21
— — — — — — — — — — — — — — — — ✓
✓ ✓ ✓ *22 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
SAUTO
10
143
Specifications
No. of effective pixels (camera)
Image Sensor
Lens
Focal Length
F-aperture
Shooting Distance
Appendices
10
144
Approx. 10.00 million effective pixels
1/2.3˝ CMOS (Approx. 10.60 total million pixels)
4.9 mm to 52.5 mm (equivalent to 28 mm to 300 mm on a 35-mm camera)
F3.5 to F5.6
Normal shooting: Approx. 30 cm to ∞ (Wide-angle) or 1.5 m to ∞
(Telephoto) (from the front of the lens)
Macro shooting: Approx. 1 cm to ∞ (Wide-angle), 28 cm to ∞ (Telephoto)
or 1 cm to ∞ (Zoom macro mode) (from the front of the lens)
Lens Construction 10 elements in 7 groups (4 aspherical lens elements with 5 surfaces)
Zoom Magnification
Optical zoom at 10.7 ×, Super resolution zoom at 2.0 ×, Digital zoom at
4.8 ×, Auto resize zoom at approx. 5.7 × (VGA image)
Focus Modes
Multi AF (Contrast AF method)/Spot AF (Contrast AF method)/Face-Priority
Multi AF/Subject tracking AF/Multi-target AF/MF/Snap/∞ (with AF Auxiliary
Light)
Blur Reduction
Image Sensor Shift Image Stabilizer
Shutter
Still Image
8, 4, 2, 1 to 1/2000 seconds (The upper and lower limits differ for each
Speed
shooting mode and flash mode.)
Movie
1/30 to 1/2000 seconds
Exposure Exposure
Multi Light Metering (256 segments)/Center-weighted Light Metering/
Control
Metering Mode Spot Metering
Exposure Mode Program AE
Exposure
Manual exposure compensation (+2.0 to –2.0 EV in 1/3 EV Steps), Auto
Compensation
bracket function (–0.5 EV, ±0, +0.5 EV)
Exposure Range Wide angle: 3.2 – 16.2 EV
(auto mode,
Telephoto: 4.6 – 18.4 EV
center-weighted (Exposure range for auto ISO calculated using values for ISO 100.)
metering)
Note: At 6.0 EV or lower, each drop of 1.0 EV is associated with a 0.5 EV drop
in brightness. Brightness drops by no more than –1.0 EV.
ISO Sensitivity (Standard
Auto/ISO 100/ISO 200/ISO 400/ISO 800/ISO 1600/ISO 3200
Output Sensitivity)
White Balance Mode
Auto/Multi-pattern Auto/Outdoors/Cloudy/Incandescent 1/Incandescent 2/
Fluorescent/Manual, White balance bracket function
Flash
Flash Mode
Auto flash (fires automatically in low-light conditions and when the subject
is backlit)/Anti Red-eye/Flash On/Flash Synchro./Flash Off
Built-in flash
Approx. 20 cm – 4.0 m (Wide-angle) or 28 cm – 3.0 m (Telephoto) (auto ISO
Range
with a maximum of ISO 1600, measured from the front of the lens)
Flash
±2.0 EV (1/3 EV Steps)
Compensation
Charging Time
Approx. 5 seconds
Picture Display
3.0˝ Transmissive LCD, approx. 920,000 dots
Shooting Mode
Picture Quality Mode *1
Number of Still Image
Recorded Multi-Picture
Pixels
Movie
Text
Recording Media
Auto shooting mode/My settings mode/Movie mode/Continuous mode/
Creative Shooting Mode (Dynamic Range/Miniaturize/High Contrast B&W/Soft
Focus/Cross Process/Toy Camera)/Scene mode (Portrait/Landscape/Discreet
Mode/Night. Port./Night Landscape Multi-shot/Fireworks/Cooking/Sports/
Pets/Golf Swing Continuous Mode/Zoom Macro/High Sens/Skew Correct
Mode/Text Mode)/Scene auto mode
F (Fine), N (Normal)
3648 × 2736, 3648 × 2432, 2736 × 2736, 3648 × 2048, 2592 × 1944,
2048 × 1536, 1728 × 1296 (Multi-Picture only), 1280 × 960, 640 × 480
1280 × 720, 640 × 480, 320 × 240
3648 × 2736, 2048 × 1536
SD memory card, SDHC memory card (up to 32 GB), Internal Memory
(approx. 40 MB)
N: approx. 2173 KB/Screen, F: approx. 3708 KB/Screen
F: approx. 3298 KB/Screen
F: approx. 2788 KB/Screen
F: approx. 2783 KB/Screen
F: approx. 2291 KB/Screen
F: approx. 1477 KB/Screen
N: approx. 607 KB/Screen
F: approx. 816 KB/Screen
F: approx. 200 KB/Screen
JPEG (Exif Ver. 2.3)*2
Compliant with CIPA DC-007-2009 Multi Picture Format
AVI (Open DML Motion JPEG Format Compliant)
JPEG Baseline Format Compliant (Still image, movie)
Appendices
Recording 3648 × 2736
Data
3648 × 2432
Capacity 2736 × 2736
3648 × 2048
2592 × 1944
2048 × 1536
1728 × 1296
1280 × 960
640 × 480
Recording Still Image
File Format Multi-Picture
Movie
Compression
Format
Other Major Shooting Functions Continuous mode, Self-timer (operation time: approx. 10 seconds, approx.
2 seconds, Custom), Interval shooting (shooting interval: 5 seconds to 1
hour, in increments of 5 seconds)*3, Color bracket, Focus bracket, AE/AF
target shift, Histogram display, Grid guide display, Electronic level
Other Major Playback Functions Thumbnail view, Enlarged view (maximum ×16), Resize, Level
Compensation, White Balance Compensation, Skew Correction, Trim, Flag
Function, Slide show, DPOF
Interface
USB2.0 (High-Speed USB) Mini-B, Mass storage-compatible *4, AV output
1.0 Vp-p (75 Ω), HDMI Micro Output Terminal (Type D)
Video Signal Format
NTSC, PAL
Power Supply
Rechargeable Battery (DB-100): 3.7 V
Battery Consumption *5
Usage time of DB-100: approx. 280 pictures (When [Sleep Mode] is set to
[Off] *6)
Dimensions (W × H × D)
101.5 mm × 58.6 mm × 29.4 mm (excluding projections; measured
according to CIPA guidelines)
Weight
Approx. 197 g (including memory card and supplied battery)
Approx. 176 g (camera only)
10
145
Tripod Hole Shape
Date Maintain Time
Operating Temperature
Operating Humidity
Storage Temperature
1/4-20UNC
Approx. 1 week
0 °C to 40 °C
90% or less
–20 °C to 60 °C
*1 The picture quality mode that can be set varies depending on the image size.
*2 Compatible with DCF and DPOF. DCF is the abbreviation for “Design rule for Camera File system,”
a JEITA standard. (Full compatibility with other devices is not guaranteed.)
*3 When the flash is set to [Flash Off ].
*4 Mass storage mode is supported by Windows XP, Windows Vista, Windows 7 and Mac OS X
10.1.2–10.6.4.
*5 The number of remaining shots is based on the CIPA standard and may vary depending on
usage conditions. This is for reference only.
*6 You can take approximately 300 shots when [Sleep Mode] is set to [10 seconds].
Appendices
10
146
Number of Images That Can Be Stored
The following table shows the approximate number of images that can
be recorded in the internal memory and onto an SD memory card at
various image size and picture quality settings.
Mode
5
W (other
than Golf Swing
Continuous
Mode, Text
Mode)
S
R (Continuous
Mode)
X
5 (When
[Focus] is set to
[Multi-trgt AF])
3
Image Size
j4:3F
j4:3N
i3:2F
g1:1F
g 16 : 9 F
e4:3F
c4:3F
a4:3F
z4:3F
j4:3F
j4:3N
i3:2F
g1:1F
g 16 : 9 F
e4:3F
c4:3F
a4:3F
z4:3F
x 1280
Internal
Memory
10
17
11
13
13
15
24
43
169
10
17
11
13
13
15
23
41
149
4GB
8GB
16GB
32GB
965
1631
1077
1284
1284
1471
2277
4160
15082
957
1609
1068
1270
1270
1454
2235
4022
13407
12 min.
14 s
35 min.
38 s
86 min.
28 s
1631
1973
3333
2202
2624
2624
3008
4654
8505
30828
1957
3289
2183
2596
2596
2972
4568
8221
27404
25 min.
1s
72 min.
50 s
176 min.
44 s
3333
3953
6678
4412
5257
5257
6026
9324
17039
61759
3922
6589
4373
5202
5202
5954
9151
16471
54898
50 min.
7s
145 min.
54 s
354 min.
3s
6678
7930
13396
8851
10546
10546
12089
18704
34181
123888
7867
13217
8772
10435
10435
11943
18357
33042
110125
100 min.
33 s
292 min.
41 s
710 min.
13 s
13396
2792
5484
11211
22460
45056
54 s
17
b4:3N
58
1404
22 s
y 320
Appendices
2GB
491
830
548
653
653
749
1159
2118
7681
487
819
543
647
647
740
1138
2047
6827
6 min.
14 s
18 min.
8s
44 min.
2s
830
j4:3N
7s
z 640
R (M-Cont
Plus (10M))
R (M-Cont
Plus (2M))
W
(Golf Swing
Coutinuous
Mode)
R (Speed
Cont)
W (Text
Mode)
1GB
241
411
271
321
321
370
575
1041
4028
239
405
268
318
318
366
564
1006
3554
3 min.
3s
8 min.
55 s
21 min.
39 s
411
10
z4:3N
283
6714
12288
24129
49319
98801
198192
j4:3
c4:3
17
43
411
1059
830
2118
1631
4160
3333
8505
6678
17039
13396
34181
147
Note ------------------------------------------------------------------------------------• The maximum recording time is the estimated total recording time. Movies may
be up to 4 GB in size. The maximum length is 12 minutes for movies recorded at
a [Movie Size] of [ x 1280] and 29 minutes for movies recorded at [ z 640] or
[ y 320].
• A Speed Class 6 memory card is recommended when recording movies with
[ x 1280] selected for [Movie Size].
• The maximum number of consecutive shots that can be taken using continuous
mode is 999. When the number of remaining shots is 1000 or more, “999” is
displayed on the picture display.
• The maximum numbers of shots for M-Cont Plus (2M)/M-Cont Plus (10M) and
Speed Cont are the estimated total numbers of shots that can be recorded. The
maximum number of shots that can be taken consecutively at one time is 26 for
M-Cont Plus (2M) and 15 for M-Cont Plus (10M) and 120 for Speed Cont.
• The maximum number of shots for Multi-trgt AF is the estimated total number
of shots that can be recorded. The number of shots that can be recorded at
one time is five. When the number of remaining shots is 9999 or more, “9999” is
displayed on the picture display.
• The number of remaining shots displayed on the picture display may differ from
the actual number of shots, depending on the subject.
• Movie recording time and the maximum number of still pictures may vary
depending on the capacity of the recording destination (internal memory or SD
memory card), shooting conditions, and the type and manufacturer of the SD
memory card.
• Choose image size according to how the picture will be used:
Appendices
10
148
Image Size
j 4 : 3 F/ j 4 : 3 N/
i 3 : 2 F/ g 1 : 1 F/
g 16 : 9 F
e 4 : 3 F/ c 4 : 3 F
a 4 : 3F
z 4 : 3F
Description
• For creating large prints.
• For downloading to a computer for trimming and
other processes.
• For creating prints.
• For shooting a large number of pictures.
• For shooting a large number of pictures.
• For attaching to e-mail.
• For posting on a website.
Defaults Settings/Functions Whose
Defaults Are Restored When the Camera Is
Turned Off
Turning the camera off may reset some function settings to their
defaults. The table below indicates whether or not the function is reset
to its default when the camera is turned off.
Shooting
Appendices
{: setting is saved ×: setting is reset
Function
Default Settings
Dynamic Range Expansion
{ AUTO
Soft Focus Options
{ Strong
Vignetting
{ Weak
Toy Color
{ On
Hue
{ Basic
Plus Normal Shooting
{ Off
Picture Quality/Size
{ j 4 : 3N
Density
{ Normal
Size (Text Mode)
{ j4:3
Movie Size
{ x 1280
Focus
{ Multi AF
Pre-AF
{ Off
Exposure Metering
{ Multi
Image Settings
{ Standard
Super Resolution
{ Off
Noise Reduction
{ Auto
Flash Exposure Compensation
{ 0.0
Auto Bracket
{ Off
Time Exposure
{ Off
Custom Self-Timer
{ Pictures: 2 Pics,
Interval: 5 Sec.
Interval Shooting
× 0 Sec.
Camera Shake Correction
{ On
Slow Shutter Limit
{ Off
Date Imprint
{ Off
Exposure Compensation
{ 0.0
White Balance
{ Multi-P AUTO
ISO Setting
{ Auto
Maximum ISO for ISO Auto
{ AUTO 1600
Macro
{ Macro Off
10
149
Appendices
10
150
{: setting is saved ×: setting is reset
Function
Default Settings
Shooting
Flash
{ Auto
Self-Timer
× Self-Timer Off
Playback
Volume Adjustment
{ —
Setup
LCD Brightness
{ —
Reg. My Settings
{ —
Step Zoom
{ Off
Set Fn Button
{ AF/Subj.Trckng
ADJ Button Setting 1
{ Exposure Comp.
ADJ Button Setting 2
{ White Balance
ADJ Button Setting 3
{ ISO
ADJ Button Setting 4
{ Quality
AF Auxiliary Light
{ On
Operation Sounds
{ All
Volume Settings
{ „„… (Medium)
LCD Confirmation Time
{ 0.5 seconds
Auto Power Off
{ 5 minutes
LCD Auto Dim
{ On
Digital Zoom Image
{ Normal
Level Setting
{ Display
Grid Guide Display Options
{
Function Guide
{ On
Shooting Info. Display Frame
{ Off
Minimum Distance
{ Show
Auto Rotate
{ On
White Saturation Display
{ Off
Card Sequence No.
{ Off
USB Connection Type
{ Mass Storage
Date Settings
{ —
Language/N
{ *1
Video Out Mode
{ *1
HDMI Output
{ AUTO
Sleep Mode
{ Off
Confirm Firmware Version
— —
Eye-Fi Connection Settings
{ On
Eye-Fi Connection Display
— —
*1 The default setting varies depending on where you purchased the camera.
Using Your Camera Abroad
Battery Charger (Model BJ-10)
The battery charger can be used in regions with a current of 100-240 V, 50 Hz/60 Hz.
If you are going to travel to a country that uses a different shaped wall outlet/plug,
please consult your travel agent on a plug adapter suitable for wall outlets in your
country of destination.
Do not use electrical transformers. It may damage the camera.
Warranty
This product was manufactured for use in the country in which it was purchased.
The warranty is only valid in the country in which the camera was purchased.
Should the product fail or malfunction while you are abroad, the manufacturer
assumes no responsibility for servicing the product locally or bearing the
expenditure incurred therefore.
Playback on Television in Other Regions
Playback is possible on televisions (or monitors) equipped with a video input
terminal. Please use the AV cable provided.
This camera is compatible with both NTSC and PAL television formats. Set the video
format on the camera to match that of the television you are using.
When you go abroad, set your camera to the local video format.
Cautions on Use
Cautions on Use
Appendices
• This product was manufactured for use in the country in which it was
purchased. The warranty is only valid in the country in which the camera was
purchased.
• Should the product fail or malfunction while you are abroad, the
manufacturer assumes no responsibility for servicing the product locally or
bearing the expenditure incurred therefore.
• Be sure not to drop or apply any sudden force to the camera.
• While you are carrying the camera, be careful not to hit it against other
objects. Take special care to not hit the lens and picture display.
• Firing the flash consecutively may heat the firing unit. Do not fire it
consecutively more than necessary.
• Do not touch the flash and keep foreign objects away from the firing unit.
Doing so can cause burns and fires.
• Do not fire the flash near eyes. It could cause visual impairment (particularly
for infants).
• Do not fire the flash near the driver of a vehicle to avoid causing accidents.
10
151
• The battery may become hot after extended use. Touching the battery
immediately after use could result in burns to your fingers.
• If the picture display or panel is exposed to sunlight, they may become
washed out and images may become hard to view.
• The picture display and panel may contain some pixels that do not remain
lit up continually in part or at all. Also, the brightness may become uneven
because of the characteristics of LCDs. These are not failures.
• Do not forcefully press the surface of the picture display.
• In an environment where the temperature changes suddenly, condensation
may occur in the camera, resulting in troubles such as fogging of the glass
surface or malfunctions of the camera. If this occurs, place the camera in a
bag to slow the temperature change as much as possible. Take it out of the
bag after the temperature difference from the atmosphere has decreased
to a fairly small amount. If condensation occurs, remove the battery and
memory card, and wait until the moisture has dried before using the camera.
• To avoid damaging the connectors, do not put any objects into the camera’s
microphone or speaker holes.
• Do not get the camera wet. Do not operate the camera with wet hands. This
can result in malfunction or an electrical shock.
• Before taking any important pictures (such as at weddings, on trips abroad,
etc.), test the camera to check operation and ensure proper functioning. We
recommend that you keep this manual and spare battery on hand.
Conditions in which condensation may easily occur: ----------------------• When the camera is moved to an environment where the temperature differs greatly.
• In humid places.
• In a room immediately after being heated, or when the camera is exposed
directly to cooled air from an air-conditioner or another similar appliance.
Appendices
10
152
Care and Storage
Care
• Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will
suffer.
• When dust or dirt does get on the lens, do not touch it directly with your
fingers, and either use a blower (available in stores) to blow it off, or a soft
cloth to gently dust it off. Special care should be taken for the lens barrel.
• After use at the beach or around chemicals, wipe it off particularly carefully.
• In the unlikely event that your camera fails to work properly, please consult
your Ricoh Repair Center.
• There are high voltage circuits in this camera. As this is dangerous, do not
dismantle this camera under any circumstances.
• Do not get volatile substances, such as thinner, benzene, or pesticides on
your camera. This may cause a change in quality, paint to peel, etc.
• As the surface of the picture display is easily scratched, do not rub hard
objects against it.
• Clean the surface of the picture display by wiping gently with a soft cloth
containing a small amount of display cleaner (that does not contain organic
solvents) sold in stores.
Use and Storage
Appendices
• Please avoid using or storing your camera in the following kinds of places, as
this may damage the camera.
- In high heat and humidity, or where there is severe change in temperature
or humidity.
- Places with a lot of dust, dirt or sand.
- Places with severe vibration.
- Places where it is in direct contact with vinyl or rubber products or chemicals,
including mothballs or other insect repellent, for long periods of time.
- Places with strong magnetic fields (near a monitor, transformer, magnet, etc.).
• Store your camera in a dust-free camera bag, etc. to prevent dust or dirt from
getting on the camera. Also, avoid carrying the camera without a case (in
your pocket, etc.) to help to keep free from dust or fiber particles.
• Remove the battery if you are not going to use the camera for a long period
of time.
10
Precautions regarding care of your camera
1. Be sure to turn the power off.
2. Remove the batteries before caring for your camera.
153
Warranty and Servicing
Appendices
10
154
1. This product is backed by a limited warranty. During the warranty period mentioned
in the Warranty supplied with your camera, any defective parts will be repaired free
of charge. In the event of a camera malfunction, contact the dealer from which you
purchased the camera or your nearest Ricoh Repair Center. Please note that you will not
be reimbursed for the cost of bringing the camera to the Ricoh Repair Center.
2. This warranty does not cover any damage resulting from:
1 failure to follow the instructions in the instruction manual;
2 repair, modification or overhaul not conducted by an authorized service center listed
in the instruction manual;
3 fire, natural disaster, act of God, lightning, abnormal voltage, etc.;
4 improper storage (noted in the “Camera User Guide”), mold, or otherwise insufficient
care of the camera.
5 submergence in water (flooding), exposure to alcohol or other beverages, infiltration
of sand or mud, physical shock, dropping of the camera, or pressure on the camera,
and other unnatural causes.
3. After the warranty period has passed, you will be liable for all repair fees, including those
incurred at an authorized service center.
4. You will be liable for all repair fees, even within the warranty period, if the warranty card is
not attached or if the distributor's name or the purchase date have been changed or are
not indicated on the card.
5. Expenses for overhaul and thorough inspection by special request of the customer will be
charged to the customer, whether or not they are incurred during the warranty period.
6. This warranty only applies to the camera and not to the accessories, such as the case and
strap, nor does it apply to the battery and other consumables provided.
7. Any consequential damages arising from failure of the camera, such as expenses incurred
in taking pictures or loss of expected profit, will not be reimbursed whether they occur
during the warranty period or not.
8. The warranty is only valid in the country in which the camera was purchased.
* The above provisions refer to repairs offered free of charge, and do not limit your legal
rights.
* The intention of the above provisions is also described in the warranty card provided
with this camera.
9. Parts essential to the servicing of the camera (that is, components required to maintain
the functions and quality of the camera) will be available for a period of five years after
the camera is discontinued.
10. Please note that if the camera is seriously damaged by flooding, submergence, infiltration
of sand or mud, violent shocks or dropping, it may not be repairable, and restoration to
its original condition may be impossible.
Note ------------------------------------------------------------------------------------• Before sending the camera in for repair, check the battery and read the
instruction manual again to ensure proper operation.
• Some repairs require a significant amount of time to be completed.
• When sending the camera to a service center, please include a note which
describes the defective part and the problem as precisely as possible.
• Remove all accessories not related to the problem before sending the camera
to the service center.
• This warranty does not apply to data stored on an SD memory card or in
internal memory.
INFORMATION TO THE USER
USA FCC Part 15 Class B
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. (FCC 15.21)
Properly shielded and grounded cables and connectors must be used for connections to
host computer in order to comply with FCC emission limits. (FCC 15.27)
An AC adapter with a ferrite core must be used for RF interference suppression.
COMPLIANCE INFORMATION STATEMENT
Product Name: DIGITAL CAMERA
Model Number: CX5
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note to Users in Canada
Note: This Class B digital apparatus complies with Canadian ICES-003
Appendices
RICOH AMERICAS CORPORATION
5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899
Remarque Concernant les Utilisateurs au Canada
Avertissement : Cet appareil numerique de la classe B est conforme a la norme NMB-003
du Canada
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
10
155
Index
A
E
ADJ./OK Button .................................. 16, 18, 52
ADJ Button Setting ............................... 52, 111
Adobe Reader ..................................................127
AE/AF Target Shift.............................................53
AE Lock ....................................................................57
AF Auxiliary Light ................................... 17, 111
AF Window ...........................................................17
Auto Bracket ................................................82, 88
Auto Power Off........................................ 28, 111
Auto Rotate .......................................................113
Auto Shooting Mode .............................15, 30
AV Cable ..............................................................107
Enlarged View .....................................................41
Error Messages ................................................134
Export Still Images ...................................76, 94
Exposure Compensation .....................84, 90
Exposure Metering ..........................................81
Eye-Fi .....................................................................114
Eye-Fi Cards ..........................................................24
B
Battery .............................................................26, 27
Battery/Card Cover ..................................18, 27
Battery Charger ..........................................14, 26
C
Camera Shake .....................................................32
Camera Shake Correction............................84
Card Sequence No. .......................................113
Change Grid Point............................................94
Color Bracket (CL-BKT)...................................89
Common Terminal for USB Port/AV
Output..................... 18, 107, 118, 124, 131
Confirm Firmware Version........................114
Continuous Mode ....................................15, 64
Cooking ..................................................................60
Copy to Card from Internal Memory ....95
Creative Shooting Mode ......................15, 68
Cross Process .......................................................68
Custom Self-Timer............................................83
D
156
DPOF ............................................................. 95, 106
Dynamic Range Double Shot ...........68, 70
Dynamic Range Expansion ................70, 79
Date Imprint ........................................................84
Date Settings ............................................ 28, 114
Delete.......................................................................42
Delete Button..............................................18, 42
Density ....................................................................80
Digital Zoom............................................. 34, 117
Digital Zoom Image ...................34, 112, 117
Direct Print .........................................................118
Discreet Mode ....................................................59
DISP. Button ..................................................18, 45
DL-10 .....................................................................123
F
Fireworks ................................................................60
Flag Function Display.....................................94
Flag Function Setting .............................94, 96
Flash .......................................................... 17, 18, 35
Flash Exposure Compensation.................82
Fn (Function) Button...............................18, 55
Focus ................................................................80, 86
Focus Bracket (FOCUS-BKT) .......................89
Format [Card] ...................................................110
Format [Internal Memory]........................110
Function Guide ...............................................112
G
Golf Swing Continuous Mode ..................60
Grid Guide Display ...........................................45
Grid Guide Display Options.....................112
H
Hand strap ............................................................14
HDMI Micro Output Terminal
(Type D) .............................................................18
HDMI Output....................................................114
High Contrast B&W..........................................68
High Sens...............................................................60
Histogram Display ............................................50
Hue ............................................................................79
I
Image Settings ...................................................81
Internal Memory ............................................147
Interval Shooting ..............................................83
ISO Setting ....................................................84, 92
L
Landscape .............................................................59
Language/N .............................................114
LCD Auto Dim ..................................................112
LCD Brightness ................................................110
LCD Confirmation Time .............................111
Lens ...........................................................................17
Lens Cover.............................................................17
Level Compensation............................ 94, 100
Level Indicator ....................................................48
Level Setting ............................................. 48, 112
R
M
S
M-Cont Plus (10M) ...................................64, 66
M-Cont Plus (2M) ......................................64, 67
Macro ...............................................................18, 34
Macro Target ........................................................56
Manual Focus (MF)...........................................87
Maximum ISO for ISO Auto ........................85
MediaBrowser ..................................................123
MENU Button ........................... 18, 78, 93, 109
Microphone .........................................................17
Miniaturize ....................................................68, 71
Minimum Distance .......................................113
Mode Dial ......................................................15, 17
Movie Mode.................................................15, 73
Movie Size .............................................................80
MP File .....................................................................74
Multi-Target AF ...................................................86
My Settings Mode (MY) ..................... 15, 115
Scene Auto Mode (S-AUTO)...............15, 38
Scene Mode (SCENE)..............................15, 59
SD Memory Card............................ 24, 27, 147
Self-timer .......................................................18, 37
Self-Timer Lamp.................................................17
Set Fn Button............................................ 55, 110
Setup Menu ......................................................109
Shooting Info. Display Frame .................112
Shooting Menu ..................................................78
Shutter Release Button .........................17, 30
Size.............................................................................80
Skew Correction ..................................... 94, 103
Skew Correct Mode.................................61, 63
Sleep Mode .......................................................114
Slide Show ............................................................95
Slow Shutter Limit............................................84
Soft Focus ..............................................................68
Soft Focus Options ..........................................79
Speaker ...................................................................18
Speed Cont (High) ...................................64, 67
Speed Cont (Low).....................................64, 67
Sports .......................................................................60
Step Zoom .........................................................110
Subject Tracking AF.........................................86
Super Resolution...............................................82
Super Resolution Zoom................................33
Synchro-Monitor Mode ................................45
N
Night. Port. ............................................................59
Night Landscape Multi-shot ......................60
Nightscape ...........................................................38
Noise Reduction ................................................82
O
Operation Sounds .........................................111
P
Pets ............................................................................60
PictBridge ...........................................................118
Picture Display ............................................18, 19
Picture Quality/Size .........................................79
Playback Button ......................... 18, 28, 39, 93
Playback Menu ...................................................93
Playback Mode ...........................................28, 39
Plus Normal Shooting ............................72, 79
Portrait .....................................................................59
Power .......................................................................28
POWER Button............................................17, 28
Pre-AF.......................................................................80
Protect .......................................................... 95, 104
Rechargeable Battery .............................26, 27
Recover File ..........................................................95
Reg. My Settings.................................. 110, 115
Resize .......................................................................94
Restore Defaults ................................................85
T
Text Mode .............................................................61
Thumbnail View.................................................39
Time Exposure ....................................................82
Toy Camera ...........................................................68
Toy Color ................................................................79
Trim ...................................................................94, 97
Tripod Screw Hole ............................................18
U
USB cable .......................................118, 124, 131
USB Connection Type .................................113
157
V
Video Out Mode .............................................114
Vignetting..............................................................79
VM-1.......................................................................132
Volume Settings .............................................111
W
White Balance .............................................84, 91
White Balance Bracket (WB-BKT) ............88
White Balance Compensation ....... 94, 102
White Saturation Display .................. 47, 113
White Saturation Highlights Display.....47
Z
Zoom........................................................................33
Zoom Lever ..................................................17, 33
Zoom Macro ........................................................60
158
Telephone Support Numbers in Europe
UK
(from within the UK)
(from outside the UK)
0203 239 6327
+44 203 239 6327
Deutschland
(innerhalb Deutschlands)
(außerhalb Deutschlands)
06331 268 438
+49 6331 268 438
France
(à partir de la France)
(en dehors de la France)
0800 88 18 70
+33 1 60 60 19 94
Italia
(dall'Italia)
(dall'estero)
02 4004 7319
+39 02 4004 7319
España
(desde España)
(desde fuera de España)
900984912
+49 6331 268 440
http://www.service.ricohpmmc.com/
From environmental friendliness to environmental conservation and
to environmental management
Ricoh is aggressively promoting environmentfriendly activities and also environment
conservation activities to solve the great subject
of management as one of the citizens on our
precious earth.
To reduce the environmental loads of digital cameras, Ricoh is also trying to solve the great subjects
of “Saving energy by reducing power consumption” and “Reducing environment-affecting chemical
substances contained in products”.
If a problem arises
First of all, see “Troubleshooting” (GP.134) in this manual. If the issues still persist, please contact a
Ricoh office.
Ricoh Offices
RICOH COMPANY, LTD.
3-2-3, Shin-Yokohama Kouhoku-ku, Yokohama City, Kanagawa 222-8530, JAPAN
http://www.ricoh.com/r_dc/
RICOH AMERICAS
5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A.
CORPORATION
1-800-22RICOH
http://www.ricoh-usa.com/
RICOH INTERNATIONAL B.V.
Oberrather Straße 6, D-40472 Düsseldorf, GERMANY
(EPMMC)
(innerhalb Deutschlands)
06331 268 438
(außerhalb Deutschlands) +49 6331 268 438
http://www.ricoh.com/r_dc/
RICOH ASIA PACIFIC
21/F, One Kowloon, 1 Wang Yuen Street, Kowloon Bay, Hong Kong
OPERATIONS LIMITED
About MediaBrowser
North America (U.S.)
(Toll Free) +1-800-458-4029
Europe
UK, Germany, France and Spain: (Toll Free) +800-1532-4865
Other Countries: +44-1489-564-764
Asia
+63-2-438-0090
China
+86-21-5385-3786
Business hours: 9:00 AM to 5:00 PM
Ricoh Company, Ltd.
Ricoh Building, 8-13-1, Ginza, Chuo-ku, Tokyo
104-8222, Japan
2011 February
EN USA GB GB AE AE
Printed in China
*L761 2971*