Multimedia Projector
LV-S4
Owner’s Manual
E
English
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector
utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
◆
Compact Design
◆
This projector is designed compact in size and weight. It is
easy to carry and work anywhere you wish to use.
◆
Multi-Language Menu Display
Operation menu is available in 12 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean, or Japanese.
(See page 38.)
Compatibility
The projector widely accepts various video and computer
input signals including; Computers, 6 Color systems (PAL,
SECAM, NTSC, NTSC4.43, PAL-M, PAL-N), Component
Video, S-video and RGB scart.
◆
Keystone Adjustment
The keystone correction function is provided to correct
distortion of the projected image allowing you to use the
projector without locational constraints.
(See page 22 and 38.)
◆
Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly. (See page 25.)
◆
Auto PC Adjustment
◆
The Power management function reduces power
consumption and maintains the lamp life. (See page 41.)
◆
Incoming computer signals are recognized and the best
adjustment is automatically set by the Auto PC Adjustment.
No complicated setup is necessary and the projection is
always precise. ( See page 26. )
◆
Blackboard Function
A blackboards✳ can be used as a projection screen.
✳The board color is limited to Green.
(See page 29 and 34)
◆
Digital Zoom (for Computer)
Film Function
The Film function reproduces pictures faithful to the original
film quality from 3-2 pull-down video contents.
(See page 36.)
2
User's Logo
A projected image can be captured and used for the
starting display of the projector with the Capture function.
You can also display the captured image in an interval
during your presentation instead of blackout the image with
the No show function. (See page 22 and 40.)
◆
Selectable Lamp Mode
Brightness of the projection lamp can be selected in the
Setting menu. (See page 41.)
◆
The Digital zoom function expands (to approx. 16 times of
screen size) or compresses the image size, allowing you to
focus on crucial information at a presentation.
(See page 31.)
◆
Power Management Function
Key Lock Function
Provided to lock the operation of the projector. This
function protects the projector from being tampered with
by third persons. (See page 42)
◆
PIN Code Lock Function
The PIN code lock function prevents others except users
from using the projector. (See page 17 and 43.)
Table of Contents
Features and Design . . . . . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . . . . . .3
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . . . . . . .5
Computer Input
. . . . . . . . . . . . . . . . . . . . .24
Input Source Selection
24
Computer System Selection
25
Auto PC Adjustment
26
6
Manual PC Adjustment
27
Installing the Projector in Proper Position
6
Image Level Selection
29
Moving the Projector
6
Image Level Adjustment
30
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions . . . . . . . . . . . . . .8
Screen Size Adjustment
31
Air Circulation
Front
8
Back
8
Bottom
8
Rear Terminal
9
Top Control
10
Remote Control Unit
11
Operating Range
11
Remote Control Unit Battery Installation
12
Installation . . . . . . . . . . . . . . . . . . . . . . . . . .13
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .32
Input Source Selection
32
Video System Selection
33
Image Level Selection
34
Image Level Adjustment
35
Screen Size Adjustment
37
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Setting
38
Maintenance and Cleaning . . . . . . . . . . . . .45
Warning Indicator
45
13
Cleaning the Air Filters
46
Adjustable Feet
13
Cleaning the Projection Lens
47
Connecting the AC Power Cord
14
Cleaning the Projector Cabinet
47
Connecting to a Computer
15
Attaching the Lens Cover
47
16
Lamp Replacement
48
Lamp Replace Counter
49
Positioning the Projector
Connecting to Video Equipment
Basic Operation . . . . . . . . . . . . . . . . . . . . . .17
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Turning On the Projector
17
Turning Off the Projector
18
Troubleshooting
50
Zoom and Focus Adjustment
19
Menu Tree
52
How to Operate the On-Screen Menu
20
Indicators and Projector Condition
54
Menu Bar
21
Compatible Computer Specifications
55
Keystone Adjustment
22
Technical Specifications
56
Picture Freeze Function
22
Optional Parts
57
No Show Function
22
Configurations of Terminals
58
P-Timer Function
23
PIN code label
59
Sound Adjustment
23
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
3
To the Owner
Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section in the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
CAUTION
Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection
of Electronic Computer/Data Processing Equipment
4
Safety Precaution
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens. Do not stare directly into the lens as possible. Eye
damage could result. Be especially careful that children do
not stare directly into the beam.
– Install the projector in a proper position. If not, it may
result in a fire hazard.
– Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. Minimum clearance must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat buildup can reduce the service life of your projector, and can
also be dangerous.
SIDE and TOP
REAR
3'(1m)
3'(1m)
3'(1m)
3'(1m)
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the ventilation holes.
– If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY
AND MUST BE RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.
5
Safety Instructions
Air Circulation
Installing the Projector in Proper Position
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
Install the projector properly. Improper Installation may reduce
the lamp life and cause a fire hazard.
20˚
Do not tilt the projector more than 20
degrees above and below.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will become
hot while the projector is being used.
– Do not put anything on the projector. The materials put on
the cabinet will not only get damaged but also cause fire
hazard by heat.
Cooling fans are provided to cool down the projector. This
projector monitors internal temperature and control the
running speed of the cooling fans.
20˚
Do not point the projector up to
project an image.
Do not point the projector down to
project an image.
Do not put the projector on either
side to project an image.
Moving the Projector
When moving the projector, replace the Lens Cover and
retract Adjustable Feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period, put it
into the supplied case (carrying bag) with lens side up.
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
CAUTION
Carrying Bag (supplied) is intended for protection from dust
and scratches on the surface of a cabinet, and it is not
designed to protect an appliance from external forces. Do not
transport the projector through a courier or transport services
with this bag, otherwise the projector can be damaged. When
handling the projector, do not drop, bump, subject it to strong
forces or put other things on the cabinet.
USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
– Do not drop or bump the projector, otherwise damages or
malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to the projector. To transport a projector through a
courier or transport service, consult your dealer for their
information.
6
Compliance
Federal Communication Commission Notice
Multimedia Projector, Model : LV-S4E and LV-S4U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
Réglementation canadienne sur les intérferences radio
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into
the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the
outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
7
Part Names and Functions
q Focus Ring
w Infrared Remote Receiver
e Projection Lens
r Zoom Lever
t Lens Cover
y Air Intake Vent
u Exhaust Vent
Front
q
w
i
e
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
r
t
CAUTION
u
i Speaker
y
Back
t
q Air Intake Vent
w Terminals and Connectors
e Power Cord Connector
r Exhaust Vent
t Top Controls and Indicators
CAUTION
q
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
w
e
Bottom
r
e
w
q
8
q Air Filters
w Air Intake Vents
e Adjustable Feet
CAUTION
Hot air is exhausted from the exhaust vents.
When using or installing the projector, the
following precautions should be taken.
– Do not put any flammable objects near these
vents.
– Keep front grills at least 3’(1m) away from any
objects, especially heat-sensitive objects.
– Do not touch this area, especially screws and
metallic part. This area will become hot while
the projector is being used.
This projector detects internal temperature and
will automatically adjust the running speed of the
cooling fans.
Part Names and Functions
RESET
q
w
VIDEO
AUDIO IN
COMPUTER/ S-VIDEO/
COMPONENT IN
y
q VIDEO
Connect the composite video output from video
equipment to VIDEO jack. (p16)
w AUDIO IN (Stereo)
Connect the audio output from computer or video
equipment connected to q or y to this jack. (p15, 16)
e AUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack.
(p15, 16)
This terminal outputs sound from AUDIO IN terminal.
e
Part Names and Functions
Rear Terminal
r
AUDIO OUT SERVICE PORT
(VARIABLE)
MONITOR OUT
t
t MONITOR OUT
This terminal outputs the signal coming from
COMPUTER / S-VIDEO / COMPONENT IN terminal.
(This terminal cannot output RGB(Scart) signal from
COMPUTER / S-VIDEO / COMPONENT IN terminal.)
(p15)
y COMPUTER / S-VIDEO / COMPONENT IN
Connect S-video output, RGB Scart 21-pin video output,
component video output or computer output to this
connector. (p15,16)
r SERVICE PORT
This jack is used to service this projector.
✽
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the RESET
button with a pen, which will shut down and restart the unit. Do not use the
RESET function excessively.
✔Note:
• Audio out and Monitor out terminal works only when the projector is under operation and do not work when the projector is in stand-by state or Power
management mode (p41).
9
Part Names and Functions
Top Control
POWER
VOL
+
VOL
-
MENU
INPUT
WARNING
LAMP REPLACE
q
w e
r
q POWER button
Turn the projector on or off. (p17, 18)
POWER indicator
Flash red until the projector gets ready to be turned
on. It turns red when the projector is in the stand-by
mode. It remains green while the projector is under
operation. (p17, 18, 54)
w LAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws
to an end. (p48, 54)
e WARNING indicator
Emit red light when the projector is in the abnormal
condition. This indicator also flashes red when the
internal projector temperature goes up over the
operating range. (p45, 54)
10
t
y
r OK button
Execute the item selected. It is also used to expand/
compress the image in Digital zoom +/– mode. (p31)
Point ed7 8 ( VOL + / – ) button
Select an item or adjust the value in the On-Screen
Menu. These are also used to pan the image in the
Digital zoom + mode. (p31)
Point 7 8 button are also used as VOL +/– button. (p23)
t MENU button
Open or close the On-Screen Menu. (p20)
y INPUT button
Select the input source. (p24, 32)
Part Names and Functions
Part Names and Functions
Remote Control Unit
q POWER button
Turn the projector on or off. (p17, 18)
w VIDEO button
Select the VIDEO input. (p32)
e
w
e COMPUTER button
Select the COMPUTER input source. (p24, 32)
q
r MENU button
Open or close the On-Screen Menu. (p20)
t KEYSTONE button
Correct the keystone distortion. (p22, 38)
y D.ZOOM ed buttons
Select the Digital zoom +/– mode and resize the image.
(p31)
POWER
INPUT
COMPUTER
OMPUTER VIDEO
!4
MENU
VOL+
VOL-
r
!3
t
KEYSTONE IMAGE NO SHOW
y
u FREEZE button
Freeze the picture. (p22)
i AUTO PC button
Automatically adjust the computer image to its
optimum setting. (p26)
!2
o MUTE button
Mute the sound. (p23)
!1
!0 P-TIMER button
Operate the P-timer function. (p23)
!0
!1 NO SHOW button
Temporarily turn off the image on the screen. (p22)
D.ZOOM FREEZE AUTO PC P - TIMER
MUTE
!2 IMAGE button
Select the image level. (p29, 34)
!3 OK button
Execute the selected item, or to expand or compress
the image in Digital zoom +/– mode. (p31)
u
i
o
!4 Point ed 7 8 ( VOL + / – ) buttons
Select an item or adjust the value in the On-Screen Menu.
These are also used to pan the image in the Digital zoom +
mode. (p31)
Point 7 8 buttons are also used as VOL +/– mode.
(p23)
✔Note:
• See p42 for changing the remote control unit code.
16.4’
(5 m)
Operating Range
Point the remote control unit toward the projector (Infrared
Remote Receiver) whenever pressing any button. Maximum
operating range for the remote control unit is about 16.4’
(5m) and 60° in front of the projector.
30°
30°
11
Part Names and Functions
Remote Control Unit Battery Installation
1
Remove the battery
compartment lid.
2
Slide the batteries into
the compartment.
3
Replace the compartment
lid.
Two AAA size batteries
For correct polarity (+ and
–), be sure battery terminals
are in contact with pins in
the compartment.
To insure safe operation, please observe the following precautions :
● Use (2) AAA, SUM-4 or LR03 type alkaline batteries.
● Replace two batteries at the same time.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control unit to moisture or heat.
● Do not drop the remote control unit.
● If the battery has leaked on the remote control unit, carefully wipe the case clean and install new batteries.
● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
12
Installation
Positioning the Projector
This projector is designed to project on a flat projection surface and can be focused from 4.3’(1.3m) - 21.3’(6.5m). Refer to
the figure and the table below for the screen size and the distance between the projector and the screen.
A:B = 9:1
21.3' (6.5m)
16.1' (4.9m)
(Inch Diagonal)
200”
Max. Zoom
10.6' (3.2m)
150”
Min. Zoom
Installation
4.3' (1.3m)
169”
100”
127”
A
83”
40”
B
34”
Screen Size
(W x H) mm
4 : 3 aspect ratio
34”
40”
100”
150”
200”
691 x 518
813 x 610
2032 x 1524
3048 x 2286
4064 x 3048
Zoom (min)
4.3' (1.3m)
4.9' (1.5m)
12.5' (3.8m)
19.0' (5.8m)
––-––
Zoom (max)
––-––
4.3' (1.3m)
10.6' (3.2m)
16.1' (4.9m)
21.3' (6.5m)
(Center)
✔Note:
• The brightness in the room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
• The values shown above are approximate and may vary from the actual size.
Adjustable Feet
Projection angle can be adjusted up to 8.0 degrees with the
adjustable feet.
1
Lift the front of the projector and pull upward the feet lock
latches on both sides of the projector.
2
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.
3
To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by the Menu operation. (p22, 38)
Feet Lock Latches
Adjustable Feet
13
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce risk of electrical
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power being supplied.
Connect the projector with all peripheral equipment before turning
the projector on. (See page 15, 16 for connection.)
CAUTION
For safety, unplug the AC power cord when the projector is not
in use. When this projector is connected to an outlet with the
AC power cord, it is in Stand-by mode and consumes a little
electric power.
Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment and
must be easily accessible.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
Ground
To the power cord connector
on your projector.
14
To the AC outlet.
(120 V AC)
To the AC outlet.
(200 - 240 V AC)
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (HDB 15 pin) (Only one cable is supplied)
• Audio Cable (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
Installation
External Audio Equipment
Monitor output
Audio output
(Stereo)
Monitor input
Audio Cable
(Stereo) ✽
VGA cable
Audio output
VGA cable
AUDIO IN
Audio Cable
(Stereo) ✽
VIDEO
AUDIO IN
AUDIO OUT SERVICE PORT
(VARIABLE)
AUDIO OUT
(VARIABLE)
RESET
COMPUTER/ S-VIDEO/
COMPONENT IN
MONITOR OUT
COMPUTER /
S-VIDEO /
COMPONENT IN
MONITOR OUT
✔Note:
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
• Audio out and Monitor out terminal works only when the projector is under
operation and do not work when the projector is in the stand-by state or the Power
management mode (p41).
• See p57 for ordering optional parts.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
15
Installation
Connecting to Video Equipment
Cables used for connection
• Scart-VGA Cable (Separately supplied as LV-CA31) ✽
• S-VIDEO-VGA Cable (Separately supplied as LV-CA33) ✽
• S-VIDEO Cable ✽
• Component-VGA Cable (Separately supplied as LV-CA32) ✽
• Component Cable ✽
• Video Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
External Audio Equipment
RGB Scart
21-pin
Output
S-Video
Output
S-Video
cable✽
Component
Video Output
(Y, Pb/Cb, Pr/Cr)
Component
cable✽
Video
Output
Video
cable ✽
Scart-VGA
cable ✽
S-VideoVGA cable✽
ComponentVGA cable ✽
Audio
Output (Stereo)
Audio
cable ✽
(stereo)
VIDEO
VIDEO
RESET
AUDIO IN
AUDIO IN
COMPUTER/ S-VIDEO/
COMPONENT IN
COMPUTER /
S-VIDEO /
COMPONENT IN
✔Note:
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
• Audio out and Monitor out terminal works only when the projector is under
operation and do not work when the projector is in the stand-by state or the Power
management mode (p41).
• See p57 for ordering optional parts.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
16
Audio Input
Audio cable ✽
(stereo)
AUDIO OUT SERVICE PORT
(VARIABLE)
MONITOR OUT
AUDIO OUT
(VARIABLE)
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
2
Connect the projector's AC power cord into the AC outlet.
The POWER indicator blinks red in a moment and emits red
light.
3
Press the POWER button on the top control or on the
remote control unit. The POWER indicator turns green
lighting and the cooling fans start to operate. The
preparation display appears on the screen and the count
down starts.
16
4
After the count-down, the image level that was selected last
and the Lamp mode status icon (see page 41) appear on the
screen.
The preparation display disappears after 30 seconds.
Selected Image Level and Lamp Mode
Image Level
Lamp mode
(See page 41 for Lamp mode.)
✔Note:
• If the projector is locked with a PIN code, the PIN code Input Dialog Box will
appear. Enter the PIN code as instructed below.
• When the On start function is on, this projector is turned on automatically by
connecting the AC power cord to an AC outlet. (See page 41 for the On start
function.)
Enter a PIN code
Pointer
Basic Operation
Select a number by pressing the Point 7 8 buttons and fix the number
with the OK button. The number will change to "✳". If you fixed an
incorrect number, move the pointer to "Set" or "Clear" once by pressing the
Point d button, then return to "PIN code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
PIN code Input Dialog Box
When the four-digit number is fixed, the pointer will automatically move to
"Set". Press the OK button so that you can start to operate the projector.
If you entered an incorrect PIN code, "PIN code" and the number (✳✳✳✳)
will turn red and disappear. Enter a correct PIN code all over again.
After the OK icon
disappears, you can
operate the projector.
What is PIN code?
PIN code is a security code using Personal Identification Number that
allows the person who knows it to operate the projector. Setting the PIN
code prevents others except the specific users from operating the
projector.
A PIN code consists of a four-digit number. Refer to the PIN code lock
function in Setting on page 43 for locking operation of the projector with
your PIN code.
17
Basic Operation
Turning Off the Projector
1
Press the POWER button on the top control or on the
remote control unit, and a message "Power off?" appears on
the screen.
2
Press the POWER button again to turn off the projector. The
POWER indicator starts to blink red, and it continues while
the cooling fans are operating for about 90 seconds. (About
120 seconds when the fan mode is L2. See page 44.)
The message disappears after 4 seconds.
3
When the projector has cooled down enough to be turned on
again, the POWER indicator emits red light. Then you can
disconnect the AC power cord.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES
BEFORE TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
POWER INDICATOR EMITS RED LIGHT. OTHERWISE
IT WILL RESULT IN SHORTENING THE LAMP LIFE.
✔Note:
• The projector cannot be turned on during the cooling period with the POWER
indicator blinking red. You can turn it on again after the POWER indicator emits red
light.
• Do not operate the projector continuously without rest. Continuous use may result
in shortening the lamp life. Turn off the projector and give it a rest about an hour in
every 24 hours.
• This projector monitors internal temperature and automatically controls the
running speed of the cooling fans.
• If the WARNING indicator blinks or emits red light, see “Warning Indicator” on page
45.
18
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Lever
Focus Ring
Basic Operation
19
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
Menu icon
On-Screen Menu
1
Press the MENU button to display the On-Screen Menu.
2
Press the Point 7 8 buttons to select a Menu icon to adjust.
Press the Point ed buttons to select an item to adjust.
Pointer (red frame)
Press the Point d button to
move the pointer.
3
Press the OK button to show the item data. Press the Point
7 8 buttons to adjust the data. Refer to the following pages
for respective adjustment.
Item
Menu bar
Pointer
(red frame)
OK
button
✔Note:
• The selected item is not active until the OK button is pressed.
Item data
Press the Point 7 8 buttons
to adjust the value.
Quit
Exit this menu.
POWER
INPUT
Remote Control Unit
COMPUTER
OMPUTER VIDEO
Point buttons
MENU
VOL+
VOL-
MENU button
KEYSTONE
IMAGE NO SHOW
OK button
AUTO PC P - TIMER
D.ZOOM
TopFREEZE
Control
Point button
MUTE
VOL
-
VOL
+
MENU
INP
Used to move the
Pointer up/ down /
right / left.
G
E
MENU button
OK button
Used to select the item.
20
Basic Operation
Menu Bar
For computer source
Guide Window
Show the selected
Menu of the OnScreen Menu.
PC System Menu
Used to select
computer system.
(p25)
Image Select Menu
Screen Menu
Setting Menu
Used to select an image
level among Standard,
High contrast,
Blackboard(Green), and
Custom. (p29)
Used to adjust size
of image. [Normal
/ True / Wide /
Digital zoom +/–]
(p31)
Used to change
settings of the
projector or reset lamp
replace counter.
(p38-44)
PC Adjust Menu
Image Adjust Menu
Sound Menu
Used to select
input source
either Computer
or Video. (p24)
Used to adjust
parameters to
match with input
signal format.
(p26-28)
Used to adjust computer image.
[Contrast / Brightness / Color
temp. / White balance (R/G/B) /
Gamma] (p30)
Used to adjust
volume or mute
sound. (p23)
Basic Operation
Input Menu
For video source
Same function as
menu for computer
source.
Input Menu
Image Select Menu
Screen Menu
Used to select
input source
either Video or
Computer.
(p32)
Used to select an image
level among Standard,
Cinema, Blackboard(Green)
and Custom. (p34)
Used to set size
of image to
Normal or Wide.
(p37)
AV System Menu
Image Adjust Menu
Used to select
system of selected
video source.
(p33)
Used to adjust picture image.
[Contrast / Brightness / Color / Tint /
Color temp. / White balance (R/G/B) /
Sharpness / Gamma / Progressive /
Film] (p35-36)
Same function as menu
for computer source.
21
Basic Operation
Keystone Adjustment
If a projected picture has keystone distortion, correct the image with the keystone adjustment.
1
Press KEYSTONE button on the remote control unit or select
Keystone on the Setting menu (p38) to display the Keystone
dialog box.
2
Correct keystone distortion by pressing Point ed buttons.
Press Point e button to reduce the upper part of image, and
press Point d button to reduce the lower part.
Reduce the upper width with Point e button.
– Arrows are blue in no correction.
– The arrow of direction being corrected turns
light blue.
– The arrow disappears at the maximum
correction.
– If you press the KEYSTONE on the remote
control unit once more while the keystone
dialog box is being displayed, the adjustment
will be canceled.
Reduce the lower width with Point d button.
INPUT
POWER
COMPUTER VIDEO
MENU
Picture Freeze Function
Press the FREEZE button on the remote control unit to freeze the
picture on the screen. To cancel freezing, press the FREEZE
button again.
VOL-
VOL+
Remote Control Unit
KEYSTONE IMAGE NO SHOW
D.ZOOM FREEZE AUTO PC P - TIMER
MUTE
KEY STONE
button
NO SHOW
button
FREEZE
button
No Show Function
Press the NO SHOW button on the remote control unit to black
out the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as “User” in the Logo item in the Setting Menu
(p40), the screen changes each time you press the NO SHOW
button as follows.
black out ➜ the captured image ➜ normal ➜ • • • • •
22
The message disappears after 4 seconds.
Basic Operation
INPUT
P-Timer Function
Press the P-TIMER button on the remote control unit. The timer
display “00 : 00” appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press the PTIMER button again to cancel the P-Timer function.
POWER
COMPUTER VIDEO
MENU
VOL-
VOL+
Remote Control Unit
KEYSTONE IMAGE NO SHOW
D.ZOOM FREEZE AUTO PC P - TIMER
MUTE
P-TIMER
button
Sound Adjustment
Direct Operation
indicate approximate
level of volume.
Volume
Press the VOL +/– buttons on the top control or on the remote
control unit to adjust volume. The volume dialog box appears on
the screen for a few seconds.
+ button to turn up the volume and – button to turn down the
volume.
Press the MUTE button to set
the Mute function On or Off.
Basic Operation
Mute
Press the MUTE button on the remote control unit to cut off the
sound. To restore sound to its previous level, press the MUTE
button again or press the VOL +/– buttons.
The display
after 4 seconds.
INPUT disappears
POWER
COMPUTER VIDEO
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Sound Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to select, and then press the OK
button.
Remote Control Unit
VOL - button
MENU
VOL-
VOL+
VOL + button
KEYSTONE IMAGE NO SHOW
D.ZOOM FREEZE AUTO PC P - TIMER
Volume
MUTE
MUTE button
Press the Point 8 button to turn up the volume, and press the
Point 7 button to turn down the volume.
Sound Menu
Mute
Press the Point 7 8 buttons to cut off the sound. Dialog box
display is changed to “On” and the sound is cut off. To restore
the sound to its previous level, press the Point 7 8 buttons again.
Sound Menu icon
indicate approximate
level of volume.
close the Sound Menu.
23
Computer Input
Input Source Selection
Direct Operation
Select Computer by pressing the INPUT button on the top control
or press the COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Top Control
VOL
+
MENU
INPUT
INPUT button
Computer
Video
Remote Control Unit
COMPUTER
button
INPUT
POWER
COMPUTER
OMPUTER VIDEO
MENU
VOL-
Input Menu icon
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Input Menu icon.
2
Press the Point ed button to move the red arrow pointer to
Computer and then press the OK button.
3
After the Source Select Menu appears for Computer, move
the pointer to RGB and then press the OK button.
VOL+
KEYSTONE IMAGE
Input Menu
NO SHOW
D.ZOOM FREEZE AUTO PC P - TIMER
MUTE
Move
the pointer (red
arrow) to Computer
and press the OK
button.
Computer
Source Select Menu
Move the pointer to RGB and
press the OK button.
24
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan
system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal
format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector is
shown on page 55 )
✔Note:
• The projector may display one of the following messages.
Auto
When the projector cannot recognize connected
signal conforming to PC Systems provided in this
projector, the Auto PC Adj. function works to display
proper images and the message “Auto” is displayed
on the PC System Menu icon. When the image is not
projected properly, manual adjustment is required.
(p27, 28)
-----
There is no signal input from computer. Check the
connection of your computer and the projector. (See
"Troubleshooting" p50)
Mode 1
User preset system manually adjusted in PC
Adjustment menu. Adjusted data can be stored in
Mode 1 - 5. (p27, 28)
SVGA 1
PC system provided in the projector. The projector
selects a proper system and displays it.
PC System Menu
The Auto PC Adj. function
operates to adjust the
projector.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC System Menu
PC system can also be selected manually.
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the PC System Menu icon.
2
Press the Point d button to move the red arrow pointer to
the system that you want to set, and then press the OK
button.
The PC System Menu icon
displays the system being
selected.
Computer Input
1
Systems on this dialog box
can be selected.
Custom Mode (1~5) set in the
PC Adjustment Menu.
(p27, 28)
25
Computer Input
Auto PC Adjustment
INPUT
POWER
COMPUTER VIDEO
The Auto PC Adj. function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer. The Auto PC Adj. function can be operated as follows.
MENU
Direct Operation
The Auto PC adjustment function can be operated directly by pressing
the AUTO PC button on the remote control unit.
VOL-
VOL+
Remote Control Unit
KEYSTONE IMAGE NO SHOW
D.ZOOM FREEZE AUTO PC P - TIMER
AUTO PC button
MUTE
Menu Operation
PC Adjust Menu
Auto PC Adj.
1
Press the MENU button to display the On-Screen Menu.
Press the Point 7 8 buttons to move the red frame pointer
to PC Adjustment Menu icon.
2
Press the Point d button to move the red frame pointer to
Auto PC Adj. icon and then press the OK button twice.
To store adjustment parameters
Adjustment parameters from Auto PC Adj. can be memorized in
this projector. Once parameters are memorized, the setting can
be done just by selecting Mode in the Computer System Menu
(p25). See “Store” on page 28.
✔Note:
• Fine sync, Total dots and Picture Position of some computers can not be fully
adjusted with this Auto PC Adj. function. When the image is not provided properly
with this operation, manual adjustments are required. (p27, 28)
• The Auto PC Adj. cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i,
or 1080i is selected in the Computer System Selection. (p25)
26
PC Adjust Menu icon
Move the red frame pointer to
the Auto PC Adj. icon and
press the OK button.
"Wait a moment!" message
appears while Auto PC
adjustment is in process.
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5
independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a
specific computer.
PC Adjust Menu icon
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the PC Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to adjust and then press the OK
button. An adjustment dialog box will appear. Press the
Point 7 8 buttons to adjust the value.
PC Adjust Menu
Move the red frame pointer to
an item and press the OK
button.
Fine sync
Eliminate flicker from the displayed image. Press the Point 7 8
buttons to adjust value. (From 0 to 31)
Total dots
Adjust the number of total dots in one horizontal period. Press the
Point 7 8 buttons and adjust number to match your PC image.
Selected Mode
Show status (Stored
/ Free) of the
selected Mode.
Horizontal
Adjust horizontal picture position. Press the Point 7 8 buttons to
adjust the position.
Press the Point 7 8 buttons to
adjust the value.
Vertical
Adjust vertical picture position. Press the Point 7 8 buttons to
adjust the position.
Press the OK button at this
icon to adjust the other items.
Current mode
Press the OK button to show H-Freq. and V-Freq. of the connected
computer.
Adjust clamp level. When the image has dark bars, try this
adjustment.
Computer Input
Clamp
Current mode
Press the OK button at the
Current mode icon to show
the information of the
connected computer.
27
Computer Input
Display area
Press the OK button to display the Display area dialog box. Select
the resolution at the Display area dialog box.
Press the OK button at the
Display area icon and the
Display area dialog box
appears.
Display area H
Adjust the horizontal area displayed by this projector. Press the
Point 7 8 buttons to decrease/increase the value and then press
the OK button.
Display area
Display area V
Adjust the vertical area displayed by this projector. Press the Point
7 8 buttons to decrease/increase the value and then press the OK
button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
To reset the adjusted data, select Reset and press the OK button.
The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
To store adjusted data
This Mode has parameters being stored.
Mode free
To clear adjusted data previously set, move the red frame pointer
to the Mode free icon and then press the OK button. Move the
red arrow pointer to the Mode that you want to clear and then
press the OK button.
Store
Vacant Mode
To store adjusted data, move the red frame pointer to the Store
icon and then press the OK button. Move the red arrow pointer to
any of Mode 1 to 5 in which you want to store and then press the
OK button.
Show values of “Total
dots,” “Horizontal,”
“Vertical,” “Display area
H,” and “Display area V.”
Quit
Exit the PC Adjustment Menu.
To clear adjusted data
Close this dialog box.
✔Note:
• Auto PC Adj., Display area, Display area (H/V), and Full screen cannot be selected
when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or “1080i” is selected in
the Computer System Menu (p25).
28
Computer Input
INPUT
Image Level Selection
Direct Operation
POWER
COMPUTER VIDEO
MENU
VOL-
VOL+
Remote Control Unit
Select an image level among Standard, High contrast,
Blackboard(Green), Custom by pressing the IMAGE button on the
remote control unit.
KEYSTONE IMAGE NO
O SHOW
IMAGE button
Standard
Normal picture level preset on this projector.
High Contrast
Picture adjustment improved in reproduction of the halftones.
This adjustment is suitable for providing a better image in a
brighter place.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Custom
User preset image in the Image Level Adjustment (p30).
D.ZOOM FREEZE AUTO PC P - TIMER
MUTE
IMAGE button
Standard
High Contrast
Blackboard(Green)
Custom
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Image Select Menu icon.
2
Press the Point d button to move the red frame pointer to
the level that you want to set and then press the OK button.
Image Select Menu icon
Image Select Menu
Computer Input
Standard
Normal picture level preset on this projector.
High contrast
Picture adjustment improved in reproduction of the halftones.
This adjustment is suitable for providing a better image in a
brighter place.
Blackboard(Green)
Move the red frame pointer to
the level and press the OK
button.
The level being selected.
Picture level suitable for the image projected on a blackboard.
See above for further description.
Custom
User preset image in the Image Level Adjustment (p30).
29
Computer Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Image Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to adjust, and then press the OK
button. The level of each item is displayed. Adjust each
level by pressing the Point 7 8 buttons.
Contrast
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the OK button.
Press the Point 7 button to decrease contrast and the Point 8
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust image darker and the Point 8
button to adjust image brighter. (From 0 to 63.)
Color temp.
Press the Point 7 button or the Point 8 button for Color temp.
level that you want to select. (XLow, Low, Mid, or High)
Selected Image Level
White balance (Red)
Press the Point 7 button to lighten red tone and the Point 8
button to deepen red tone. (From 0 to 63.)
Press the Point 7 8 buttons to
adjust value.
White balance (Green)
Press the Point 7 button to lighten green tone and the Point 8
button to deepen green tone. (From 0 to 63.)
Store icon
Press the OK button at this
icon to store the adjustment.
White balance (Blue)
Press the Point 7 button to lighten blue tone and the Point 8
button to deepen blue tone. (From 0 to 63.)
Gamma
Press the Point 7 8 buttons to obtain better balance of contrast.
(From 0 to 15.)
Reset
To reset the adjusted data, select Reset and press the OK button.
The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the OK button. The message
“OK?” will appear. Select [Yes] to store manual adjustment.
To set this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p29).
If you change the Image level (p29) without storing the adjusted
data, the figures will go back to the factory default settings.
Quit
Close the Image Level Adjustment.
✔Note:
•After adjusting any of the White balance Red, Green or Blue, the Color temp.
will change to "Adj.".
30
“OK?” message
Move the pointer to [Yes] and
then press the OK button.
Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which allows you to customize the image size.
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Screen Menu icon.
2
Press the Point d button and move the red frame pointer to
the function that you want to select and then press the OK
button.
Screen Menu
Screen Menu icon
Move the red frame to the
function and press the OK
button.
Normal
Provide image to fit screen size.
True
Provide image in its original size. When the original image size is
larger than the screen size (800 x 600), this projector enters
“Digital zoom +” mode automatically.
Wide
Provide image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
INPUT
Digital Zoom +
When the Digital Zoom + is selected, the On-Screen Menu
disappears and the message “D. Zoom +” is displayed. Press the
OK button to expand the image size. And press the Point ed7 8
buttons to pan the image. The Panning function can work only
when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM
▲ button on the remote control unit.
Digital Zoom –
Remote
Control Unit
COMPUTER VIDEO
POINT buttons
MENU
VOL-
VOL+
OK button
KEYSTONE IMAGE NO SHOW
D.ZOOM FREEZE AUTO PC P - TIMER
D.ZOOM e button
D.ZOOM d button
MUTE
Computer Input
When the Digital Zoom – is selected, the On-Screen Menu
disappears and the message “D. Zoom –” is displayed. Press the
OK button to compress the image size.
A projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control unit.
POWER
To exit the Digital Zoom +/– mode, press any button except the
D.ZOOM ▲▼, OK, and Point button.
To return to the previous screen before adjusting the screen size,
select Screen size from the Screen Size Adjustment or Input
source from the Input Source Selection (p24) again, or adjust the
screen size with the D.ZOOM or the OK button.
✔Note:
• This Screen Menu cannot be operated when “720p(HDTV)”, “1035i (HDTV)”, or
“1080i (HDTV)” is selected in the Computer System Menu (p25).
• The True and Digital Zoom +/– cannot be selected when “480i”, “575i”, “480p”,
or “575p” is selected in the Computer System Menu (p25).
• This projector cannot display any resolution higher than 1280 x 1024. If your
computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the
lower before connecting to the projector.
• The image data in other than SVGA (800 x 600) is modified to fit the screen size in
initial mode.
• The panning function may not operate properly if the computer system prepared in
the PC Adjustment Menu is used.
31
Video Input
Input Source Selection
Direct Operation
Select either Video or Computer by pressing the INPUT button on
the top control or VIDEO or COMPUTER button on the remote
control unit.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Top Control
VOL
+
MENU
INPUT
INPUT button
Computer
Video
Remote Control Unit
COMPUTER
button
INPUT
POWER
COMPUTER
OMPUTER VIDEO
MENU
VOL-
VIDEO
button
VOL+
Input Menu icon
KEYSTONE IMAGE NO SHOW
Menu Operation
Input Menu
D.ZOOM FREEZE AUTO PC P - TIMER
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Input Menu icon.
2
Press the Point d button to move the red arrow pointer to
Video or Computer and then press the OK button. The
Source Select Menu will appear. When you select Video,
video input is selected. When you select Computer, move
the pointer to the correct input source and then press the OK
button.
MUTE
Move
the pointer (red arrow)
to Computer and press the
OK button.
Computer
Source Select Menu
Move the pointer to S-Video,
Component or RGB (Scart)
and press the OK button.
S-Video
When the input source is connected to the
COMPUTER / S-VIDEO / COMPONENT IN with
a S-Video-VGA Cable, select S-Video.
Component
When the input source is coming from video
equipment connected to the COMPUTER / SVIDEO / COMPONENT IN with a ComponentVGA Cable, select Component.
RGB (Scart)
When the input source is coming from video
equipment connected to the COMPUTER / SVIDEO / COMPONENT IN with a Scart-VGA
Cable, select RGB (Scart).
✔Note:
• S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionally
supplied. See page 57 for order.
32
Video Input
Video System Selection
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the AV System Menu icon.
2
Press the Point d button to move the red arrow pointer to
the system that you want to select and then press the OK
button.
Video or S-Video
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format
among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.
AV System Menu (Video or S-Video)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the OK button.
AV System Menu (Component)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the OK button.
Video Input
33
Video Input
INPUT
Image Level Selection
POWER
COMPUTER VIDEO
Direct Operation
MENU
Select a desired image level among Standard, Cinema, Blackboard
(Green), Custom by pressing the IMAGE button on the remote
control unit.
VOL-
VOL+
Remote Control Unit
KEYSTONE IMAGE NO SHOW
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Custom
User preset image in the Image Level Adjustment (p35, 36).
IMAGE button
D.ZOOM FREEZE AUTO PC P - TIMER
MUTE
IMAGE button
Standard
Cinema
Blackboard(Green)
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Image Select Menu icon.
2
Press the Point d button to move the red frame pointer to
the level that you want to set and then press the OK button.
Custom
Standard
Normal picture level preset on this projector.
Cinema
Image Select
Menu icon
Image Select Menu
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Move the red frame pointer to a level
and press the OK button.
Picture level suitable for the image projected on a blackboard. See
above for further description.
Custom
User preset image in the Image Level Adjustment (p35, 36).
34
The level being selected.
Video Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Image Adjust Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to adjust and then press the OK
button. The level of each item is displayed. Adjust each
level by pressing the Point 7 8 buttons.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the OK button.
Contrast
Press the Point 7 button to decrease contrast and the Point 8
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust image darker and the Point 8
button to adjust image brighter. (From 0 to 63.)
Color
Press the Point 7 button to lighten color and the Point 8 button to
deepen color. (From 0 to 63.)
Tint
Press the Point 7 8 buttons to obtain proper color. (From 0 to 63.)
Color temp.
Press the Point 7 8 buttons for Color temp. level that you want to
select. (XLow, Low, Mid, or High)
Press the Point 7 8 buttons to
adjust value.
Press the OK button at this
icon to display other items.
White balance (Red)
Press the Point 7 button to lighten red tone and the Point 8
button to deepen red tone. (From 0 to 63.)
Press the OK button at this
icon to display previous items.
White balance (Green)
Press the Point 7 button to lighten green tone and the Point 8
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten blue tone and the Point 8
button to deepen blue tone. (From 0 to 63.)
Sharpness
Press the Point 7 button to soften the image and the Point 8
button to sharpen the image. (From 0 to 15.)
Gamma
Video Input
Press the Point 7 8 buttons to obtain better balance of contrast.
(From 0 to 15.)
✔Note:
• The Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or
PAL-N.
• After adjusting any of the White balance Red, Green or Blue, the Color temp.
will change to "Adj.".
35
Video Input
Progressive
Interlaced video signal can be displayed in a progressive picture.
Off . . . .Not activated.
L1 . . . . .Select “L1” for an active picture.
L2 . . . . .Select “L2” for a still picture.
Film
This function is effective on 3-2 pulldown video sources. With this
function on, the projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the OK button.
The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the OK button. The message
“OK?” will appear. Select [Yes] to store the manual adjustment.
To set this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p34).
If you change the Image level (p34) without storing the adjusted
data, the figures will go back to the factory default settings.
Quit
Close the Image Level Adjustment.
✔Note:
• Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is
selected. (p33)
• Film can only be activated when selecting NTSC for Video System and L1/ L2 for
Progressive and in any state shown below.
1. When selecting NTSC, NTSC4.43 PAL-M or 480i in the Video System Selection
(p33).
2. When selecting Auto and signal is NTSC, NTSC4.43, PAL-M(Composite) or
480i(Component) in the Video System Selection (p33).
• 3-2 Pulldown or Telecine transfer is the process of changing images from film mode
to video mode. While film runs at 24 frames per second (fps), NTSC television
signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded
up to 30fps and transferred using a proper field pattern to get the best film-like
images.
36
Store icon
“OK?” message
Move the pointer to [Yes]
and then press the OK
button.
Video Input
Screen Size Adjustment
This projector has a picture screen resize function, which allows you to customize the image size.
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point 7 8 buttons to move the red frame
pointer to the Screen Menu icon.
2
Press the Point d button and move the red frame pointer to
the function that you want to select and then press the OK
button.
Screen Menu
Screen Menu icon
Move the red frame to a function and
press the OK button.
Normal
Provide image at a normal video aspect ratio of 4 : 3.
Wide
Provide image at a wide screen ratio of 16 : 9.
✔Note:
• Screen Menu cannot be operated when “720p”, “1035i”, or “1080i” is selected in
the Video System Selection (p33).
Video Input
37
Setting
Setting
Setting menu allows you to set up the other various functions
described as follows;
1
Press the MENU button to display the On-Screen Menu.
Press the Point 7 8 buttons to move the red frame pointer
to the Setting Menu icon.
2
Press the Point d button to move the red frame pointer to
the item that you want to set and then press the OK button.
The Setting dialog box appears.
Setting Menu (Language)
Set the red frame
pointer to the item
and press the OK
button.
Setting Menu icon
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
When pressing the OK
button at Language, the
Language Menu appears.
Keystone
This function corrects distortion of the projected image. Select
either Store or Reset with the Point 7 8 buttons, and then press
the OK button. The keystone dialog box appears. Adjust keystone
with the Point ed buttons.
Store . . . . stores the keystone adjustment even after the AC
power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power
cord is disconnected.
Blue back
When this function is "On", the projector produces a blue image
while input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On . . . . . . . shows all the On-Screen Displays.
Off . . . . . . . does not show On-Screen Displays except;
●
●
●
●
●
38
On-Screen Menu
“Power off?” message
P-Timer
“No signal” message
”Wait a moment!” message
Setting
Logo PIN code lock
Logo PIN code lock
Setting
This function prevents an unauthorized person from changing the
Logo setting.
Off
. . . . .the Logo setting can be changed freely from the
Logo menu. (p40)
On . . . . . .the Logo setting cannot be changed without the
Logo PIN code.
If you want to change the Logo PIN code lock setting, enter a
Logo PIN code along the following steps. The initial Logo PIN code
is set "4321" at the factory.
Enter a Logo PIN code
Select a number by pressing the Point 7 8 buttons and fix the
number with the OK button. The number will change to "✳". If
you fixed an incorrect number, move the pointer to "Set" or "Clear"
once by pressing the Point d button, then return to "Logo PIN
code". Enter the correct number again.
Logo PIN code lock Dialog Box
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will automatically
move to "Set". Press the OK button so that you can change the
Logo PIN code lock setting.
If you entered an incorrect Logo PIN code, "Logo PIN code" and
the number (✳✳✳✳) will turn red and disappear. Enter a correct
Logo PIN code all over again.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit number.
Select "Logo PIN code change" with the Point d button and press
the OK button. Set a new Logo PIN code.
After a correct Logo PIN code is entered, the
following dialog box will appear.
Pointer
Select On/Off by pressing the Point 7 8 buttons or
change the Logo PIN code.
Be sure to note the new Logo PIN code and keep it at hand.
✔Note:
• If you forget your Logo PIN code and unable to change it, the Logo PIN code can be
reset to the factory default setting (4321) according to the following procedures.
When you reset the Logo PIN code, the PIN code and Key lock will be reset, as well.
1. Disconnect the AC Power Cord from the AC outlet.
2. As pressing the OK button on the projector, connect the AC Power Cord into an
AC outlet again. Keep pressing the OK button until the POWER indicator emits.
The Logo PIN code will be returned to the factory default setting while the Logo
PIN code lock state will remain the same as previous set state.
39
Setting
Logo
This function decides what to be displayed on the starting-up
display as follows:
User . . . . . .the image you captured
Default . . . .the factory-set logo
Off . . . . . . .count-down only
Capture
Capture
This function enables you to capture the image being projected
and use it for a starting-up display or interval of presentations.
After capturing the projected image, go to the Logo function and
set it to “User”. Then the captured image can be displayed when
turning on the projector next time or pressing the NO SHOW
button. (p22)
To capture the image, select [Yes]. To cancel the Capture
function, select [No].
Select [Yes] to capture
the projected image.
✔Note:
• Before capturing an image, select Standard in the Image Select Menu to capture a
proper image. (See page 29, 34.)
• A signal from a computer can be captured up to XGA(1024 x 768). A signal from
video equipment can be captured except for 720p, 1035i, and 1080i.
• When capturing the image that has been adjusted by the Keystone function, the
adjusted data is automatically reset and the projector captures an image without
keystone adjustment.
• When the Logo PIN code lock function is On, the Logo and Capture menu cannot
be selected.
• When starting to capture the new image, the previously stored image is cleared
even if you cancel capturing.
Select [Yes] to
stop capturing.
Ceiling
Ceiling
When this function is “On”, the picture is top/bottom and left/right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Rear
When this function is "On”, the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
40
Rear
Setting
Power management
Setting
For reducing power consumption as well as maintaining the lamp
life, the Power management function turns off the projection lamp
when the input signal is interrupted and no button is pressed for a
certain period.
Power management
Time left until Lamp off
If the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message "No signal"
appears on the screen. The count-down of the set time will get
started. The count-down time can be set between 1 and 30
minutes. Set the count-down time with Point 7 8 buttons.
When the count-down time has been elapsed, the lamp will be
turned off to cool itself down. The POWER indicator is blinking red
during this cooling-off period. The next operation depends on the
setting as follows :
Ready . . . . . .When the lamp has been fully cooled down, the
POWER indicator changes to green blinking. In
this condition, the projection lamp will be turned
on if the input signal is reconnected or any
button on the top control or remote control unit
is pressed.
Shutdown . . .When the lamp has been fully cooled down, the
power will be turned off.
Off . . . . . . . . .The Power management function is canceled.
Press the OK button at Power
management and this box
appears. Select one of three
settings with the Point 7 8
buttons, and go to the timer
with the Point ed buttons
and set time with the Point 7
8 buttons.
On start
When this function is “On”, the projector is automatically turned
on just by connecting the AC power cord to a wall outlet.
Press the Point 7 8 button to switch On / Off.
✔Note:
• Be sure to turn the projector off properly (see “Turning Off the Projector” on page
18). If the projector is turned off in the incorrect sequence, such as disconnecting
the AC power cord before completing the cool down etc., the On start function does
not operate properly.
Lamp mode
This function allows you to change the brightness of the screen.
Normal.........normal brightness
Auto.............brightness according with the input signal
Silent ..........lower brightness reduces the lamp power
consumption and extends the lamp life.
The sound is quiet.
41
Setting
INPUT
Remote control
This projector has two different remote control unit codes; the
factory-set normal code (Code 1) and the secondary code (Code 2).
This switching function prevents remote control unit interference
when operating several projectors or video equipment at the same
time.
When operating the projector in “Code 2”, both the projector and
remote control unit must be switched to “Code 2”.
Remote
Control
COMPUTER
VIDEO Unit
MENU
To change the code of the projector :
VOL-
VOL+
Press and hold
MENU and IMAGE
buttons for 10 seconds
or more.
KEYSTONE IMAGE NO SHOW
Set the remote control unit in the Setting menu to “Code 2.”
To change the code of the remote control unit :
POWER
D.ZOOM FREEZE AUTO PC P - TIMER
Press and hold both MENU and IMAGE buttons on the remote
control unit together for 10 seconds or more. After changing the
code, make sure the remote control unit operates properly.
To return to the normal code (Code 1), operate both the projector
and remote control unit in the ways above again.
MUTE
✔Note :
• When battery of the remote control unit is replaced, the remote
control unit code automatically returns to the normal code (Code 1).
Key lock
Key lock
This function locks operation of the top control and remote control
unit.
It is useful to prevent operation by an unauthorized person.
···· not locked.
···· lock operation of the top control. To unlock, use the
remote control unit.
···· lock operation of the remote control unit. To unlock,
use the top control.
If the top control accidentally becomes locked and you do not have
the remote control unit nearby, disconnect the AC power cord
from the AC outlet, and then with pressing the OK button, reinsert
the AC power cord. This will cancel the top control lock.
Logo PIN code and PIN code will also be canceled.
42
Chose Key lock and
this box appears.
Select one of these
with the Point ed
buttons and select
[Yes] to activate it.
Setting
PIN code lock
PIN code lock
Setting
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
Off ...............the projector is not locked with the PIN code.
On1 .............require to enter the PIN code every time turning on
the projector.
..........require
to enter the PIN code to operate the
On2
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
When the projector is
locked with the PIN
code, the PIN code
lock mark appears on
the menu bar.
Whenever to change the PIN code lock setting or the PIN code
(the four-digit number), you are required to enter the PIN code.
"1234" is set as the initial PIN code at the factory.
Enter a PIN code
Select a number by pressing the Point 7 8 buttons and fix the
number with the OK button. The number will change to "✳". If
you fixed an incorrect number, move the pointer to "Set" or
"Clear" once by pressing the Point d button, then return to "PIN
code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
Enter a PIN code
Pointer
Quit
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the OK button so that you
can change the following PIN code lock settings.
The input numbers
change to “✳” for
security.
If you entered an incorrect PIN code, "PIN code" and the
number (✳✳✳✳) will turn red and disappear. Enter a correct
PIN code all over again.
When the pointer
automatically move
to "Set", press the
OK button.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point 7 8 buttons and then
"Quit" with the Point d button and press the OK button to close
the dialog box.
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point d button, and press
the OK button. The New PIN code input dialog box will appear.
Select a number with the Point 7 8 buttons and fix the number
with the OK button. Repeat it to complete entering a four-digit
number. When the four-digit number is fixed, the pointer will
automatically move to "Set". Then press the OK button.
Be sure to note the new PIN code and keep it at hand.
Change the PIN code lock setting
Select a desired
setting with the
Point 7 8 buttons.
Change the PIN code
Select PIN code
change and press
the OK button. The
New PIN code input
dialog box will
appear.
✔Note:
• If you forget your PIN code and unable to change it, the PIN code can be reset to
the factory default setting (1234) according to the following procedures.
When you reset the PIN code, the Logo PIN code and Key lock will be reset, as well.
1. Disconnect the AC Power Cord from the AC outlet.
2. As pressing the OK button on the projector, connect the AC Power Cord into an
AC outlet again. Keep pressing the OK button until the POWER indicator emits.
The PIN code will be returned to the factory default setting while the PIN code lock
state will remain the same as previous set state.
The input numbers
are being displayed
for confirmation.
43
Setting
Fan
Fan
This function provides you the following alternatives in the cooling
fans' operation after turning off the projector. (p18)
L1 . . . . . . . .normal operation. Cooling the projector for 90
seconds after turning off the projector.
L2 . . . . . .slower operation than the normal (L1) , but takes
longer to cool down the projector. Cooling the
projector for 120 seconds after turning off the
projector.
Lamp counter reset
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. See page 49 for operation.
Factory default
Factory default
This function returns all setting values except for the user logo,
PIN code lock, Logo PIN code lock and the lamp counter to the
factory default settings.
Select
Factory
default and this box
appears.
Select
[Yes] , and the next
box appears.
Select [Yes] to
activate it.
44
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is blinking red.
TOP CONTROL
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect
the inside of the projector. The POWER indicator is blinking and
the projector is being cooled down. When the temperature inside
the projector returns to normal, the POWER indicator emits red
light and the projector can be turned on.
POWER
VOL
WARNING
WARNING
blink red
LAMP REPLACE
Maintenance & Cleaning
✔Note:
• After the temperature inside the projector returns to normal, the WARNING
indicator still continues to blink. When the projector is turned on again, the
WARNING indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation
slots are not blocked.
– Is the projector not installed near the ventilation duct of airconditioning equipment which may be hot? Install the
projector away from the ventilation duct of air-conditioning
equipment.
– Are the air filters clean? Clean the air filters periodically. (p46)
The projector is shut down and the WARNING indicator emits red light.
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside and the WARNING
indicator emits red light. In this case, disconnect the AC power
cord and reconnect it, and then turn the projector on once again
for check. If the projector is still turned off and the WARNING
indicator emits red light, disconnect the AC power cord and
contact the service station for check and repair.
TOP CONTROL
POWER
VOL
WARNING
LAMP REPLACE
WARNING
emit red light
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC
POWER CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
45
Maintenance and Cleaning
Cleaning the Air Filters
Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and
adversely affect the life of the projector. Clean the air filters following the steps below.
1
Turn off the projector, and disconnect the AC power cord
from the AC outlet.
2
Turn the projector upside down and remove the air filters by
pulling the latches upward.
3
4
Clean the air filters with a brush or rinse them softly.
When cleaning the air filters by rinsing, dry them well.
Replace the air filters properly. Make sure that the air filters
are fully inserted.
CAUTION
Do not operate the projector with the air filters removed.
Dust may accumulate on the LCD panel and the
projection mirror degrading picture quality.
Do not put small parts into the air intake vents. It may
result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector. Use of the projector in these
environments may cause poor image quality.
When using the projector under dusty or smoky conditions, dust
may accumulate on a lens, LCD panels, or optical elements inside
the projector. This condition may degrade the quality of a
projected image.
When the symptoms above are noticed, contact your authorized
dealer or service station for proper cleaning.
46
Air Filter
Pull up and remove.
Maintenance and Cleaning
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
Disconnect the AC power cord before cleaning.
2
Softly wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use lens cleaning paper or a commercially
available air blower to clean the lens. Avoid using an
excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface.
3
When the projector is not in use, replace the lens cover.
Maintenance & Cleaning
1
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
1
Disconnect the AC power cord before cleaning.
2
Gently wipe the projector body with a soft, dry cleaning
cloth. When it is heavily soiled, use a small amount of mild
detergent and finish with a soft, dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface.
3
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
Attaching the Lens Cover
When moving this projector or while not using it over an extended
period of time, replace the lens cover.
1
Thread the string through the hole on the lens cover and
then tie a knot in the string to secure it in place.
2
Thread the other end of the string through the hole at the
bottom of the projector. Then pass the lens cover through
the resulting loop of the string. Tie a knot in the string to
secure it in place.
1
2
47
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector draws to an
end, the LAMP REPLACE indicator emits yellow light. If this
indicator emits yellow light, replace the lamp with a new one
promptly.
Top Control
POWER
VOL
WARNING
This indicator emits yellow
light when the life of the
projection lamp draws to an
end.
CAUTION
LAMP REPLACE
CAUTION
Allow a projector to cool, for at least 45 minutes before
you open the Lamp cover. The inside of the projector
can become very hot.
For continued safety, replace with a lamp of the same
type. Do not drop a lamp or touch a glass bulb! The
glass can shatter and may cause injury.
Lamp Cover
Screw
Follow these steps to replace the lamp.
1
Turn off the projector and disconnect the AC plug. Allow the
projector to cool for at least 45 minutes.
2
Loosen the screw with a screwdriver, and remove the lamp
cover.
3
Loosen 2 screws of the lamp with a screwdriver and pull out
the lamp by grasping the handle.
4
Replace the lamp with a new one and tighten the 2 screws
back into position. Make sure that the lamp is set properly.
Replace the lamp cover and tighten the screw.
Screw
Lamp
Handle
5
Connect the AC power cord to the projector and turn on the
projector.
6
Reset the Lamp replace counter.
See “Lamp Replace Counter” on the next page .
Screw
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
●
Model No. of your projector
● Replacement Lamp Type No.
:
:
LV-S4
LV-LP23
( 610 317 7038 )
48
Maintenance and Cleaning
Lamp Replace Counter
Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP
REPLACE indicator stops emitting yellow light.
Turn the projector on, press the MENU button and the OnScreen Menu will appear. Press the Point 7 8 buttons to
move the red frame pointer to the Setting Menu icon.
2
Press the Point d button to move the red frame pointer to
the Lamp counter reset item and then press the OK button.
The message "Lamp replace counter reset?" is displayed.
Move the pointer to [Yes] and then press the OK button.
3
Another confirmation dialog box appears and select [Yes] to
reset the Lamp replace counter.
✔Note:
• Do not reset the Lamp replace counter without implementation of lamp
replacement. Be sure to reset the Lamp replace counter only after replacing the
lamp.
Maintenance & Cleaning
1
Move the pointer to Lamp
counter reset and then press the
OK button. The message
“Lamp replace counter reset?”
is displayed.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter
period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use
of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
49
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer"
and “Connecting to Video Equipment” on page15,16.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the computer.
50
Problem:
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator emits red light.
– Wait 90-120 seconds after the projector is turned off when turning the
projector back on. The projector can be turned on after the POWER
indicator turns red. (See “Turning Off the Projector” on page 18.)
– Check the WARNING indicator. If the WARNING indicator emits red light,
the projector cannot be turned on. (See "Warning Indicator" on page 45.)
– Check the projection lamp. (See page 48.)
– Unlock Key lock for the projector in the Setting Menu. (See page 42.)
Image is out of focus.
– Adjust focus of the projector. (See page 19.)
– Provide proper distance between the projector and the projection
screen. (See page 13.)
– Check the projection lens to see if it needs cleaning. (See page 47.)
– Moving the projector from a cool to a warm place may result in moisture
condensation on the projection lens. In such cases, leave the projector
off and wait until condensation evaporates.
No image
– Check the connection between your computer or video equipment
and the projector. (See page 15, 16)
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output when
connecting to a projector. See your computer’s instruction manual for the
setting.
– It takes about 30 seconds to display an image after turning on the projector.
– See if the selected system is corresponding with your computer or video
equipment. (See page 25 and 33)
– Select correct input source once again through menu operation.
(See page 24, 32)
– Make sure the temperature is not out of the specified Operating
Temperature (41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)).
Image is Left/Right reversed.
Image is Top/Bottom reversed.
– Check the Ceiling / Rear item. (See “Setting” on page 40.)
– Check the Ceiling item. (See “Setting” on page 40.)
No sound
–
–
–
–
Check audio cable connection from audio input source.
Adjust the audio source.
Press the Vol + button. (See page 23.)
Press the Mute button. (See page 23.)
Appendix
Some displays are not seen
during the operation.
– Check the Display item. (See “Setting” on page 38.)
PIN code dialog box appears at start-up. – PIN code lock is being set. Input a PIN code (1234 or numbers you have
set). (See “PIN code lock” on page 17 and 43.)
The Remote Control Unit does not work. – Check the batteries.
– Make sure no obstruction is between the projector and remote control unit.
– Make sure you are not too far from the projector when using the remote
control. Maximum operating range is 16.4’ (5m).
– Make sure the code of the remote control unit is conformed to the projector.
(See page 42.)
– Unlock Key lock for the remote control unit in the Setting Menu.
(See page 42.)
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the
service center. Give the model number and explain about the problem. We will advise you how to obtain service.
Appendix
The CE Mark is a Directive conformity
mark of the European Community (EC).
This symbol on the nameplate means the product is
Listed by Underwriters Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
51
Appendix
Menu Tree
Computer Input / Video Input
Input
Computer
RGB
Go to System (1)
S-Video
Go to System (3)
Component
Go to System (2)
RGB( Scart )
N/A
Quit
Go to System (3)
Video
✽N/A - - - not applicable
Sound
Sound
Volume
Mute
Quit
0 - 63
On / Off
Computer Input
System (1)
MODE 1
MODE 2
SVGA 1
----
Image Select
Standard
High contrast
Blackboard(Green)
Custom
Image Adjust
Contrast
Brightness
Color temp.
0 - 63
0 - 63
High
Mid
Low
XLow
Adj.
Red
Green
Blue
Gamma
Reset
Store
0 - 63
0 - 63
0 - 63
0 - 15
Yes / No
Yes
✽Systems displayed in the System Menu vary
depending on an input signal.
PC Adjust
Auto PC Adj.
Fine sync.
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area
Display area H
Display area V
Full screen
Reset
Mode free
Store
Quit
52
0 - 31
H-Sync freq.
V-Sync freq.
Quit
640 x 480
720 x 400
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1400 x 1050
Quit
On / Off
Yes / No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
No
Quit
Quit
Screen
Normal
True
Wide
Digital zoom +
Digital zoom –
Appendix
Setting
Video Input
System (2)
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Image Select
Red
Green
Blue
Sharpness
Gamma
Progressive
Film
Reset
Store
Quit
Screen
Capture
Ceiling
Rear
English
German
French
Italian
Spanish
Portuguese
Dutch
Swedish
Russian
Chinese
Korean
Japanese
Quit
Store / Reset
On / Off
On / Off
Logo PIN code entry
Off
On
PIN code change
Quit
Off
Default
User
Yes/No
On / Off
On / Off
Power management
Off
Keystone
Blue back
Display
Logo PIN code lock
Standard
Cinema
Blackboard(Green)
Custom
Contrast
Brightness
Color
Tint
Color temp.
Language
Logo
0 - 63
0 - 63
0 - 63
0 - 63
High
Mid
Low
XLow
Adj.
0 - 63
0 - 63
0 - 63
0 - 15
0 - 15
Off
L1
L2
On/ Off
Yes / No
Yes
No
Quit
Appendix
Image Adjust
Setting
Ready
Shut down
Timer(1-30 Min)
Quit
On start
Lamp mode
On / Off
Normal
Auto
Silent
Remote control
Code 1
Code 2
Key lock
Off
Projector
Remote Control Unit
Quit
PIN code lock entry
PIN code lock
Off
On1
On2
PIN code change
Quit
Fan
L1 / L2
Lamp counter reset
Factory default
Yes / No
Yes / No
Quit
Normal
Wide
53
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
POWER
WARNING
LAMP
REPLACE
red/green
red
yellow
Projector Condition
The projector is OFF. (The AC power cord is unplugged.)
• • • emit green light
✽ When
✽
The projector is preparing for stand-by or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed.
✽
The projector is ready to be turned on with the POWER button.
✽
The projector is operating normally.
✽
The projector is in the Power management mode.
✽
The temperature inside the projector is abnormally high. The projector
cannot be turned on. When the projector is cooled down enough and the
temperature returns to normal, the POWER indicator emits red light and
the projector can be turned on. (The WARNING indicator keeps blinking.)
Check and clean the air filters.
✽
The projector has been cooled down enough and the temperature returns
to normal. When turning on the projector, the WARNING indicator stops
blinking. Check and clean the air filters.
✽
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup. Do not leave the
projector on. It may cause electric shock or a fire hazard.
• • • blink green
• • • emit red light
• • • blink red
• • • off
the life of the projection lamp draws to an end, the LAMP REPLACE indicator emits yellow light. When this indicator emits
yellow light, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp.
See page 48 and 49.
54
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than
100 MHz of Dot Clock.
ON-SCREEN
DISPLAY
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
––––––––
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
H-Freq.
(kHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
V-Freq.
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
60
(Interlace)
50
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
ON-SCREEN
DISPLAY
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
MAC 21
SXGA 1
SXGA 11
SXGA 13
SXGA 14
SXGA 17
SXGA 18
720p (HDTV)
1035i (HDTV)
1080i (HDTV)
1080i (HDTV)
RESOLUTION
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1152 x 900
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
––––––––
––––––––
––––––––
––––––––
H-Freq.
(kHz)
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
68.68
64.20
61.20
50.00
50.00
61.85
46.43
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
75.08
75.06
70.40
65.20
Appendix
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
RESOLUTION
86.00
(Interlace)
94.00
(Interlace)
66.00
86.70
(Interlace)
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
55
Appendix
Technical Specifications
Mechanical Information
Projector Type
Multi-media Projector
Dimensions (W x H x D)
10.63" x 3.27" x 7.76" (270mm x 83.1mm x 197.2mm) (not including Adjustable Feet)
Net Weight 5.1lbs (2.3 kg)
Feet Adjustment
0˚ to 8.0˚
Panel Resolution
LCD Panel System
0.5" TFT Active Matrix type, 3 panels
Panel Resolution
800 x 600 dots
Number of Pixels
1,440,000 (800 x 600 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz
Optical Information
Projection Image Size (Diagonal)
Adjustable from 34" to 200"
Projection Lens
F 1.6 ~ 1.8 lens with f 18.3 mm ~ 21.9 mm with manual zoom and focus
Throw Distance
4.3' ~ 21.3' (1.3m ~ 6.5m)
Projection Lamp
160W UHP Lamp
Interface
Video Input Jack
Audio Input Jack
Monitor Out Terminal
Computer / S-Video / Component Input Terminal
Service Port Connector
Audio Output Jack
RCA Type x 1
Mini Jack (Stereo) x 1
(VGA) HDB15 Terminal X 1
(VGA) HDB15 Terminal X 1
Mini DIN 8 pin x 1
Mini Jack (stereo) x 1 (Variable)
Audio
Internal Audio Amp
Built-in Speaker
0.8 W RMS
1 speaker, ø1.3" (32mm)
Power
Voltage and Power Consumption
AC 100 ~ 120 V (3.6 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.8 A Max. Ampere), 50 / 60 Hz (Continental Europe)
Operating Environment
Operating Temperature
Storage Temperature
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10˚C ~ 60 ˚C)
Remote Control Unit
Battery
56
AAA, SUM-04 or LR03 type x 2
Operating Range
16.4’ (5m) / ±30˚
Dimensions
2.0”(W) x 0.91”(H) x 4.8”(D) (51.5mm x 23.2mm x 123mm)
Net Weight
2.11 oz (60 g) (including batteries)
Appendix
Accessories
Owner's Manual
AC Power Cord
Remote Control Unit and Batteries
VGA Cable
Lens Cover with String
Soft Carrying Bag
PIN Code Label
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of
the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
● The On-Screen Menu and figures in this manual may differ slightly from the product.
Appendix
Optional Parts
The parts listed below are optionally available. When ordering those parts, give the item name and Model No. to the sales
dealer.
Model No.
COMPONENT-VGA Cable
: LV-CA32
SCART-VGA Cable
: LV-CA31
S-Video-VGA Cable
: LV-CA33
Ceiling Hanger
: LV-CL09
Presentation Remote Control Kit
: LV-RC02
57
Appendix
Configurations of Terminals
COMPUTER INPUT/S-VIDEO INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : HDB15-PIN
4
5
10
15
14
2
3
9
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red (R/Cr) Input / Output
Green (G/Y) Input / Output
Blue (B/Cb) Input / Output
----Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
8
5
7 6
4 3
2 1
58
1
2
3
4
5
6
7
8
Serial
RXD
--------GND
RTS / CTS
TXD
GND
GND
9
10
11
12
13
14
15
----Ground (Vert.sync.)
Ground / --------Horiz. sync. Input/Output (Composite H/V sync.)
Vert. sync.
-----
Appendix
PIN code label
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
Appendix
59
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA, INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.
CANON MEXICANA, S.DE R.L.DE C.V.
Blvd. M. A. Camacho No.138, Piso PB 15, 16 y 17, Col. Lomas de Chapultepec,
C.P. 11000 México, D.F. México
CANON EUROPA N.V.
P.O.Box 2262, 1180 EG Amstelveen, The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.
102, Avenue du General de Gaulle, 92250 La Garenne Colombes, France
CANON (UK) LTD.
Woodhatch, Reigate, Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A 10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, I-20097 San Donato Milanese (MI), Italy
CANON (Schweiz) A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
CANON BELGIUM N.V./S.A
Bessenveldstraat 7, 1831 Diegem, Belgium
CANON GmbH
Zetschegasse 11, A-1232 Wien, Austria
CANON ESPANA S.A.
C/Joaquin Costa 41, 28002 Madrid, Spain
CANON SVENSKA AB
Stensätravägen 13, S-127 88 Skarholmen 2, Sweden
CANON NORGE A/S
Hallagerbakken 110, P. O. Box 2-33, Holmlia 1201 Oslo 12, Norway
CANON OY
Huopalahdentie 24, P.O. Box 1, FIN-00351 Helsinki, Finland
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kln., H. K.
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01, Keppel Bay Tower Singapore 098632
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W.2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON DENMARK A/S
Knud Hoejgaards Vej, DK-2860 Soeborg, Denmark
1AA6P1P4793-- (MR7P)
©CANON INC. 2005
YT1-1353-000
PRINTED IN CHINA