80PR-60 RTD Temper...

80PR-60 RTD Temper...
Accessories > Temperature >
80PR-60 RTD Temperature Probe
The 80PR 60 probe expands the utility of your RTD noncontact infrared thermometer by allowing you to take contact
temperature readings. You can make contact and noncontact readings at the same time because your RTD infrared
thermometer displays the results of both. Just plug the
temperature probe into the RTD jack, position the probe tip at
or below the surface of your target, and start reading
temperatures. (Refer to thermometer user manual for details.)
l Probe type: RTD (resistance temperature detector)
l Probe element: Platinum 1 KW
l Temperature range: -40 to 260 °C (-40 to 500 °F)
l Accuracy: ± 1 °C (± 2 °F)
l Jack: 3.5 mm phono type
l Probe diameter: 4.8 mm (.187 in)
l Probe length: 90 mm (3.5 in)
l Cable length (extended): 1000 mm (40 in)
© 1995 - 2005 Fluke Corporation
Privacy Statement
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF