Prestta Standard Octa-Band Cellular Embedded Antenna KEY BENEFITS

PRODUCT: Cellular LTE Antenna

Part No. 1002289

Prestta

TM

Standard Octa-Band

Cellular Embedded Antenna

700/750/850/900/1800/1900/2100/2700 MHz

KEY BENEFITS

DESIGN ADVANTAGES

Reduced Costs and Time-to-Market

 Standard antenna eliminates design fees and cycle time associated with a custom solution; getting products to market faster.

Ethertronics’ Prestta series of Isolated Magnetic

Dipole™ (IMD) embedded antennas address the challenges facing today’s product designers. IMD’s high performance and isolation characteristics offer better connectivity and minimal interference.

Prestta antennas can be used in a variety of applications including:

 M2M

 Automotive

 Automatic Meter Reading

 Healthcare

 Point of Sale

 Tracking...

Greater Flexibility with Unique Form Factors

 Ethertronics’ IMD technology helps you deliver more advanced ergonomic designs without adverse impact on product performance.

 FPC with adhesive backing enables faster and lower cost manufacturing.

RoHS Compliant

 Ethertronics’ antennas are fully compliant with the

European RoHS Directive 2002/95/EC.

END USER ADVANTAGES

Unique Form Factors Support Advanced

Industrial Designs

 Smaller, more efficient IMD embedded antennas break through restrictive design rules and provide new freedom in component placement.

TECHNOLOGY ADVANTAGES

Stays in Tune

IMD antenna technology provides superior RF field containment, resulting in less interaction with surrounding components.

Ethertronics IMD antennas

r e s i s t d e - t u n i n g ; providing a robust radio link regardless of the usage position.

Prestta antennas use patented IMD technology in a stamped metal configuration to provide high performance. IMD antennas requires a smaller design keep-out area, carry lower program development risk which yields a quicker time-to-market, without sacrificing RF performance.

Superior Range

 Better antenna function means longer range and greater sensitivity to critically precise signals— delivering greater customer satisfaction while building brand loyalty.

SERVICE AND SUPPORT

Extensive RF Experience

 Our Prestta antennas are supported by documentation, and when needed, by the expertise of RF engineers who have integrated hundreds of antenna designs into wireless devices.

Global Operations & Design Support

 Ethertronics’ global operations supports an integrated network of design centers that can take projects from concept to production.

ETHERTRONICS

5501 Oberlin Drive, Suite 100 | San Diego, CA. 92121, USA | www.ethertronics.com

Tel +(1) 858.550.3820 | fax +(1) 858.550.3821 | contact: [email protected]

PRODUCT: Cellular Antenna - P/N 1002289

Ethertronics’ Cellular Internal (Embedded) Antenna Specifications.

Below are the typical performances for a cellular application.

Electrical Specifications

Typical Characteristics.

Measurements taken with a

75 x 140 mm ground plane.

Antenna mounted directly on PC +

ABS housing material.

Wideband Cellular Antenna (MHz)

Average Efficiency (Long Edge)

Average Efficiency (Short Edge)

700-960

74%

67%

1710-2700

58%

63%

Feed Point Impedance

Radiation Pattern

50 ohms unbalanced

Omni-directional

Power Handling 2 Watt CW

Polarization Linear

Mechanical Specifications

Maximum Dimensions 53.6 x 25.1 x 1.25 mm (1.25mm high at cable solder connection)

Cable / Connector U.fl compatible connector, Cable diameter 1.13mm, 25mm Cable

Mounting Antenna backing using 3M468 Adhesive

Antenna Placement

Antenna Location 1 : Antenna located at the end of the long edge of the PCB.

Antenna Location 2 : Antenna located at the end of the short edge of the PCB.

140mm 75 mm

In this position, the antenna is located 3mm away from the PCB and 3mm above the PCB.

In this position, the antenna is located 2mm away from the PCB and 3mm above the PCB.

ETHERTRONICS

5501 Oberlin Drive, Suite 100 | San Diego, CA. 92121, USA | www.ethertronics.com

Tel +(1) 858.550.3820 | fax +(1) 858.550.3821 | contact: [email protected]

PRODUCT: Cellular Antenna - P/N 1002289

Return Loss in dB

Antenna mounted directly on PC + ABS housing material.

Antenna location 1

Antenna location 2

Typical Low Band Efficiency, 700-960MHz

Typical High Band Efficiency, 1700-2700MHz

Antenna location 1

Antenna location 2

ETHERTRONICS

5501 Oberlin Drive, Suite 100 | San Diego, CA. 92121, USA | www.ethertronics.com

Tel +(1) 858.550.3820 | fax +(1) 858.550.3821 | contact: [email protected]

PRODUCT: Cellular Antenna - P/N 1002289

Configuration test set-up

Antenna Location 1 : Antenna located at the end of the long edge of the PCB.

Antenna Location 2 : Antenna located at the end of the short edge of the PCB.

ETHERTRONICS

5501 Oberlin Drive, Suite 100 | San Diego, CA. 92121, USA | www.ethertronics.com

Tel +(1) 858.550.3820 | fax +(1) 858.550.3821 | contact: [email protected]

PRODUCT: Cellular Antenna - P/N 1002289

Typical Radiation Patterns - Antenna Location 1

ETHERTRONICS

5501 Oberlin Drive, Suite 100 | San Diego, CA. 92121, USA | www.ethertronics.com

Tel +(1) 858.550.3820 | fax +(1) 858.550.3821 | contact: [email protected]

PRODUCT: Cellular Antenna - P/N 1002289

Typical Radiation Patterns - Antenna Location 2

ETHERTRONICS

5501 Oberlin Drive, Suite 100 | San Diego, CA. 92121, USA | www.ethertronics.com

Tel +(1) 858.550.3820 | fax +(1) 858.550.3821 | contact: [email protected]

PRODUCT: Cellular Antenna - P/N 1002289

Mechanical Dimensions

© 2015 Ethertronics. All rights reserved. Ethertronics, the Ethertronics logo, shaping antenna technology, Prestta, Isolated Magnetic Dipole and the iMD logo are trademarks of Ethertronics. All other trademarks are the property of their respective owners.

Specifications subject to change and are dependent upon actual implementation. Cell 20150213