BLM7G1822S-20PB; BLM7G1822S-20PBG 1. Product profile LDMOS 2-stage power MMIC

BLM7G1822S-20PB; BLM7G1822S-20PBG 1.  Product profile LDMOS 2-stage power MMIC
BLM7G1822S-20PB;
BLM7G1822S-20PBG
LDMOS 2-stage power MMIC
Rev. 4 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
The BLM7G1822S-20PB(G) is a dual section, 2-stage power MMIC using Ampleon’s state
of the art GEN7 LDMOS technology. This multiband device is perfectly suited as general
purpose driver or small cell final in the frequency range from 1805 MHz to 2170 MHz.
Available in gull wing or straight lead outline.
Table 1.
Performance
Typical RF performance at Tcase = 25 C; IDq1 = 27 mA; IDq2 = 76 mA.
Test signal: 3GPP test model 1; 64 DPCH; PAR = 9.9 dB at 0.01% probability on CCDF; per section
unless otherwise specified in a class-AB production circuit.
Test signal
single carrier W-CDMA
f
VDS
PL(AV)
Gp
D
ACPR5M
(MHz)
(V)
(W)
(dB)
(%)
(dBc)
2167.5
28
2
32.3
23
41
1.2 Features and benefits









Designed for broadband operation (frequency 1805 MHz to 2170 MHz)
High section-to-section isolation enabling multiple combinations
Integrated temperature compensated bias
Biasing of individual stages is externally accessible
Integrated ESD protection
Excellent thermal stability
High power gain
On-chip matching for ease of use
Compliant to Directive 2002/95/EC, regarding restriction of hazardous substances
(RoHS)
1.3 Applications
 RF power MMIC for multi-carrier and multi-standard GSM, W-CDMA and LTE base
stations in the 1805 MHz to 2170 MHz frequency range. Possible circuit topologies are
the following as also depicted in Section 8.1:
 Dual section or single ended
 Doherty
 Quadrature combined
 Push-pull
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
2. Pinning information
2.1 Pinning
pin 1 index
VDS(A1)
VGS(A2)
VGS(A1)
RF_IN_A
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
RF_IN_B
VGS(B1)
VGS(B2)
VDS(B1)
1
2
3
4
5
6
7
16
RF_OUT_A / VDS(A2)
8
9
10
11
12
13
14
15
RF_OUT_B / VDS(B2)
aaa-009322
Transparent top view
The exposed backside of the package is the ground terminal of the device.
Fig 1.
Pin configuration
2.2 Pin description
Table 2.
Pin description
Symbol
Pin
Description
VDS(A1)
1
drain-source voltage of driver stage A1
VGS(A2)
2
gate-source voltage of final stage A2
VGS(A1)
3
gate-source voltage of driver stage A1
RF_IN_A
4
RF input section A
n.c.
5
not connected
n.c.
6
not connected
n.c.
7
not connected
n.c.
8
not connected
n.c.
9
not connected
n.c.
10
not connected
RF_IN_B
11
RF input section B
VGS(B1)
12
gate-source voltage of driver stage B1
VGS(B2)
13
gate-source voltage of final stage B2
VDS(B1)
14
drain-source voltage of driver stage B1
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
Table 2.
Pin description …continued
Symbol
Pin
Description
RF_OUT_B/VDS(B2)
15
RF output section B / drain-source voltage of final stage B2
RF_OUT_A/VDS(A2)
16
RF output section A / drain-source voltage of final stage A2
GND
flange
RF ground
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
BLM7G1822S-20PB
HSOP16F
plastic, heatsink small outline package; 16 leads(flat)
SOT1211-2
BLM7G1822S-20PBG
HSOP16
plastic, heatsink small outline package; 16 leads
SOT1212-2
4. Block diagram
VDS(A1)
RF_IN_A
RF_OUT_A / VDS(A2)
VGS(A1)
VGS(A2)
TEMPERATURE
COMPENSATED BIAS
VGS(B1)
VGS(B2)
TEMPERATURE
COMPENSATED BIAS
RF_IN_B
RF_OUT_B / VDS(B2)
VDS(B1)
aaa-009323
Fig 2.
Block diagram
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDS
Min
Max
Unit
drain-source voltage
-
65
V
VGS
gate-source voltage
0.5
+13
V
Tstg
storage temperature
65
+150
C
-
225
C
-
150
C
Tj
junction temperature
Tcase
case temperature
[1]
Conditions
[1]
Continuous use at maximum temperature will affect the reliability. For details refer to the online MTF
calculator.
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
6. Thermal characteristics
Table 5.
Thermal characteristics
Measured for total device.
Symbol
Rth(j-c)
[1]
Parameter
Conditions
Value
Unit
final stage; Tcase = 90 C; PL = 3.56 W
[1]
thermal resistance from junction to case
1.9
K/W
driver stage; Tcase = 90 C; PL = 3.56 W
[1]
6.2
K/W
When operated with a CW signal.
7. Characteristics
Table 6.
DC characteristics
Tcase = 25 C; per section unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
V(BR)DSS
drain-source breakdown voltage
VGS = 0 V; ID = 150.8 A
65
-
-
V
VGSq
gate-source quiescent voltage
VDS = 28 V; ID = 76 mA
1.5
2
2.5
V
Final stage
VDS = 28 V; ID = 76 mA
[1]
1.7
2.65
3.6
V
[1]
-
1
-
%
IDq/T
quiescent drain current variation with
temperature
40 C  Tcase  +85 C
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
1.4
A
IDSX
drain cut-off current
VGS = 5.55 V; VDS = 10 V
-
2.8
-
A
IGSS
gate leakage current
VGS = 1.0 V; VDS = 0 V
-
-
140
nA
65
-
-
V
Driver stage
V(BR)DSS
drain-source breakdown voltage
VGS = 0 V; ID = 30.16 A
VGSq
gate-source quiescent voltage
VDS = 28 V; ID = 27 mA
1.6
2.1
2.6
V
VDS = 28 V; ID = 27 mA
[2]
1.9
2.85
3.8
V
[2]
-
1
-
%
IDq/T
quiescent drain current variation with
temperature
40 C  Tcase  +85 C
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
1.4
A
IDSX
drain cut-off current
VGS = 5.55 V; VDS = 10 V
-
0.55
-
A
IGSS
gate leakage current
VGS = 1.0 V; VDS = 0 V
-
-
140
nA
[1]
In production circuit with 1105  gate feed resistor.
[2]
In production circuit with 765  gate feed resistor.
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
Table 7.
RF Characteristics
Typical RF performance at Tcase = 25 C; VDS = 28 V; IDq1 = 27 mA; IDq2 = 76 mA; PL(AV) = 2 W. Per section unless otherwise
specified, measured in an Ampleon wideband f = 1807.5 MHz to 2167.5 MHz straight lead production circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
-
34
-
dB
Test signal: single carrier W-CDMA [1]
Gp
power gain
f = 1807.5 MHz
f = 2167.5 MHz
30.8
32.3
33.8
dB
D
drain efficiency
f = 1807.5 MHz
-
22
-
%
f = 2167.5 MHz
20
23
-
%
19
10
dB
RLin
input return loss
f = 2167.5 MHz
-
ACPR5M
adjacent channel power ratio (5 MHz)
f = 1807.5 MHz
-
41
-
dBc
f = 2167.5 MHz
-
41
37
dBc
f = 1807.5 MHz
-
8.4
-
dB
f = 2167.5 MHz
7.2
8.4
-
dB
final stage IDq;
gate feed resistor = 1105 
-
1
-
%
driver stage IDq;
gate feed resistor = 765 
-
1
-
%
PARO
IDq/T
output peak-to-average ratio
quiescent drain current variation with
temperature
T = 40 C to +85 C
Test signal: CW [2]
s21
s21
2
phase response difference
between sections
10
-
+10
deg
insertion power gain difference
between sections
0.5
-
+0.5
dB
[1]
3GPP test model 1; 64 DPCH; PAR = 9.9 dB at 0.01% probability on CCDF.
[2]
f = 2170 MHz.
8. Application information
Table 8.
Typical performance
Test signal: 1-tone CW; RF performance at Tcase = 25 C; VDS = 28 V; IDq1 = 45 mA (both sections); IDq2 = 140 mA (both
sections) unless otherwise specified, measured in an Ampleon f = 2110 MHz to 2170 MHz straight lead class AB application
circuit (see Figure 3 for the component layout and Figure 4 for the electrical schematic).
Symbol
Parameter
Conditions
Min Typ
PL(1dB)
output power at 1 dB gain compression
f = 2140 MHz
-
43.5 -
W
PL(3dB)
output power at 3 dB gain compression
f = 2140 MHz
-
44.1 -
W
D
drain efficiency
at PL(1dB); f = 2140 MHz
-
47.6 -
%
Gp
power gain
PL(AV) = 1.585 W; f = 2140 MHz
-
31.5 -
dB
Bvideo
video bandwidth
2-tone CW; PL(AV) = 1.585 W;
f = 2140 MHz
-
170
-
MHz
Gflat
gain flatness
over a frequency range of 60 MHz;
PL(AV) = 1.585 W
-
0.4
-
dB
G/T
gain variation with temperature
f = 2140 MHz
-
0.03 -
dB/C
s122
isolation
between sections A and B;
PL(AV) = 1.585 W; f = 2140 MHz
-
28.5 -
dB
K
Rollett stability factor
T = 40 C; f = 0.1 GHz to 3 GHz
-
>1
[1]
[1]
Max Unit
-
Measured on dual section evaluation board IDq1 = 40 mA (both sections); IDq2 = 150 mA (both sections).
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
VGGA
2×
6.8 pF
LM7341
6.2 pF
-3 dB
2× 0.2 pF
2×
-3 dB
6.2 pF
LM7341
6.8 pF
VGGB
2×
aaa-013369
Printed-Circuit Board (PCB): Rogers 4350; thickness = 0.508 mm.
Fig 3.
Component layout
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 18
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
BLM7G1822S-20PB_S-20PBG#4
Product data sheet
VDS
28 V
1.3 k
10 F
50 V
VDS
28 V
Section A
BLM7G1822S-20PB
VDS(A1) 1
1 F
50 V
VGS(A2) 2
22 k
DAC drive
LM7341
1.1 k
10 F
6.3 V
5
750
15
VGS(A1) 3
~2.5 V
~2.5 V
n.c.
10 F
6.3 V
n.m.
n.c.
Driver
clamped
RF sense FET
10 F
50 V
Final
clamped
RF sense FET
5
6
16 RF_OUT_A/VDS(A2)
6.2 pF
ATC600F
RF in
n.c.
2.2 k
10 F
50 V
7
Driver
RFpower FET
Final
RFpower FET
0.2 pF
ATC600F
X3C21P1-03S
X3C21P1-03S
n.c.
1 F
50 V
22 k
n.c.
50
DAC drive
LM7341
750
10 F
6.3 V
15
n.c.
Driver
RF power FET
1.1 k
5
Final
RF power FET
8
15 RF_OUT_B/VDS(B2)
10
RF_IN_B 11
Driver
clamped
RF sense FET
Final
clamped
RF sense FET
6.8 pF
ATC600F
VGS(B2) 13
10 F
50 V
10 F
50 V
VDS
28 V
VDS(B1) 14
Section B
2.2 k
VDS
28 V
Fig 4.
Electrical schematic
10 F
50 V
BLM7G1822S-20PB
aaa-013370
LDMOS 2-stage power MMIC
7 of 18
© Ampleon The Netherlands B.V. 2015. All rights reserved.
nm
Quad AB out
VGS(B1) 12
~2.5 V
10 F
6.3 V
6.2 pF
ATC600F
9
~2.5 V
1k
0.2 pF
ATC600F
BLM7G1822S-20PB(G)
Rev. 4 — 1 September 2015
All information provided in this document is subject to legal disclaimers.
RF_IN_A 4
1k
VDS
28 V
6.8 pF
ATC600F
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
8.1 Possible circuit topologies
-3 dB / Φ-0°
In A
Out A
In
Out
-3 dB / Φ-0°
In B
Out B
aaa-009324
Fig 5.
Dual section or single ended
Splitter
Combiner
In
-3 dB / Φ-0°
λ/4
λ/4
-3 dB / Φ-90°
Out
aaa-009325
Fig 6.
Doherty
3 dB Coupler
In
3 dB Coupler
-3 dB / Φ-0°
-3 dB / Φ-90°
Out
aaa-009326
Fig 7.
Quadrature combined
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
Combiner
Splitter
In
-3 dB / Φ-0°
λ/2
λ/2
-3 dB / Φ-180°
Out
aaa-009327
Fig 8.
Push-pull
8.2 Ruggedness in class-AB operation
The BLM7G1822S-20PB and BLM7G1822S-20PBG are capable of withstanding a load
mismatch corresponding to VSWR = 10 : 1 through all phases under the following
conditions: VDS = 32 V; IDq1 = 20 mA (per section); IDq2 = 75 mA (per section);
Pi = 16 dBm (CW and corresponding to PL(3dB) under ZS = 50  load); f = 2140 MHz.
8.3 Impedance information
Table 9.
Typical impedance at 3 dB compression point
Measured load-pull data per section; test signal: pulsed CW; Tcase = 25 C; VDS = 28 V; IDq1 = 20 mA; IDq2 = 65 mA;
tp = 100 s;  = 10 %; ZS = 50 . Typical values unless otherwise specified.
tuned for maximum output power
tuned for maximum efficiency
f
ZL
Gp(max) PL
add
AM-PM
ZL
conversion
Gp(max) PL
add
AM-PM
conversion
(MHz)
()
(dB)
(W)
(%)
(deg)
()
(dB)
(W)
(%)
(deg)
BLM7G1822S-20PB
1700
15.3  j14.5
33.2
42.7
50.6
8.3
28.5  j20.2
34.6
41.6
56.5
9.2
1800
16.3  j11.7
32.9
42.7
50.8
6.3
31.3  j8.60
34.1
41.6
57.1
7.0
1900
16.1  j9.70
32.1
42.8
50.8
6.1
26.5  j0.01
33.3
41.7
57.3
6.9
2000
15.5  j8.10
31.5
42.8
50.1
6.1
21.0 + j2.20
32.6
42.0
56.4
7.3
2100
14.4  j6.90
31.5
42.9
50.0
6.9
15.6 + j2.00
32.9
42.1
55.8
8.6
2200
13.7  j6.60
31.7
42.7
49.8
8.5
12.3 + j1.20
33.0
41.6
54.3
9.6
2300
12.8  j6.80
31.4
42.5
49.1
10.6
10.0 + j0.10
32.5
41.3
53.6
10.3
BLM7G1822S-20PBG
1700
15.8  j16.1
33.5
42.5
52.9
9.2
28.9  j21.8
35.1
41.6
57.9
11.1
1800
16.5  j13.8
32.9
42.5
51.2
7.7
30.6  j11.6
34.2
41.6
56.8
8.4
1900
16.7  j12.4
32.2
42.5
50.2
7.2
27.9  j4.64
33.5
41.7
55.9
7.8
2000
16.3  j9.74
31.7
42.5
51.2
7.3
20.4 + j0.45
32.7
41.7
55.6
9.0
2100
15.6  j8.61
31.5
42.6
52.0
9.5
15.9 + j0.68
32.6
41.7
56.5
11.8
2200
14.6  j8.87
31.3
42.5
49.7
10.3
12.7  j0.44
32.4
41.6
53.8
12.1
2300
13.4  j9.32
30.5
42.4
48.2
12.8
10.7  j1.98
31.7
41.6
53.7
13.2
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
8.4 Graphs
aaa-013192
36
Gp
(dB)
0
Gp
(dB)
RLin
(dB)
(1)
30
-6
24
-12
18
-18
12
RLin
(dB)
31
-10
29
-20
(2)
-24
27
6
0
(1)
(2)
-30
-30
0
1000
1400
1800
2200
2600
f (MHz)
-36
3000
25
-40
2080 2095 2110 2125 2140 2155 2170 2185 2200
f (MHz)
Tcase = 25 C; VDS = 28 V; IDq1 = 22 mA; IDq2 = 70 mA;
PL = 1.585 W. Per section.
Tcase = 25 C; VDS = 28 V; IDq1 = 22 mA; IDq2 = 70 mA;
PL = 1.585 W. Per section.
(1) magnitude of Gp
(1) magnitude of Gp
(2) magnitude of RLin
Fig 9.
aaa-013193
33
(2) magnitude of RLin
Wideband power gain and input return loss as
function of frequency; typical values
aaa-013194
33
Gp
(dB)
60
ηD .
(%)
Gp
32
Fig 10. In-band power gain and input return loss as
function of frequency; typical values
(.
aaa-013195
6
φs21/φs21(norm)
(deg)
50
2
31
40
(1)
(1)
(2)
(2)
(3)
(3)
30
30
29
20
(3)
(2)
(1)
-2
-6
ηD
28
10
27
0
20
25
30
35
40
PL (dBm)
45
Tcase = 25 C; VDS = 28 V; IDq1 = 22 mA; IDq2 = 70 mA.
Per section.
-10
20
25
35
40
PL (dBm)
45
Normalized at PL = 22 dBm; Tcase = 25 C; VDS = 28 V;
IDq1 = 22 mA; IDq2 = 70 mA. Per section.
(1) f = 2110 MHz
(1) f = 2110 MHz
(2) f = 2140 MHz
(2) f = 2140 MHz
(3) f = 2170 MHz
30
(3) f = 2170 MHz
Fig 11. Power gain and drain efficiency as function of
output power; typical values
Fig 12. Normalized phase response as a function of
output power; typical values
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
aaa-013197
-30
IMD
(dBc)
(1)
(2)
IMD3
-45
IMD5
-60
(1)
(2)
IMD7
(1)
(2)
-75
-90
1
102
10
tone spacing (MHz)
103
Tcase = 25 C; VDS = 28 V; IDq1 = 22 mA; IDq2 = 70 mA; f = 2140 MHz; 2-tone CW; PL(AV) = 0.25 W. Per section.
(1) IMD low
(2) IMD high
Fig 13. Intermodulation distortion as a function of tone spacing; typical values
aaa-013199
-25
ACPR
(dBc)
45
ηD
(%)
-35
-45
aaa-013200
50
|s12|2
(dB)
35
40
25
30
15
20
5
10
ACPR5M
-55
ηD
-65
ACPR10M
-75
-5
26
28
30
32
34
36
38
PL (dBm)
40
Tcase = 25 C; VDS = 28 V; IDq1 = 22 mA; IDq2 = 70 mA;
f = 2140 MHz; 1-carrier W-CDMA; test model 1;
PAR = 7.2 dB at 0.01 % probability on CCDF. Per
section.
Fig 14. Adjacent channel power ratio and drain
efficiency as function of output power;
typical values
0
2025
2070
2115
2160
2205
f (MHz)
2250
Tcase = 25 C; VDS = 28 V; IDq1 = 20 mA; IDq2 = 75 mA.
Per section. Measured on evaluation board.
Fig 15. Isolation as a function of frequency;
typical values
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
9. Package outline
HSOP16F: plastic, heatsink small outline package; 16 leads(flat)
SOT1211-2
D
E
X
c
D3
E3
B
y
A
HE
v
A
D1
D2
e1
b1(2x)
w
16
B
15
(8x) METAL
PROTRUSIONS (SOURCE)
e6
(2x)
F(16x)
e5
(2x)
E2
A
E1
A2
Q1
pin 1
index
A1
detail X
1
14
b(14x)
e2
w
B
e (12x)
e3 (2x)
HE
e4 (2x)
0
Q1
v
w
y
16.16 1.62
0.1
15.96 1.57 0.25 0.25
15.76 1.52
10 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
max
nom
min
A
3.9
A1
A2
b
b1
c
D(1)
D1
D2
D3
E(1)
E1
E2
E3
e
e1
e2
0.2 3.65 0.40 5.55 0.27 20.62 19.00 16.05 20.44 10.01 8.18 5.89 9.83
0.1 3.60 0.35 5.50 0.22 20.57 18.95 16.00 20.39 9.96 8.13 5.84 9.78 1.0 7.45 1.5
0 3.55 0.30 5.45 0.17 20.52 18.90 15.95 20.34 9.91 8.08 5.79 9.73
e3
e4
References
IEC
JEDEC
JEITA
e6
F
8.45 9.55 2.97 4.07 0.2
Note
1. Package body dimensions “D and “E do not include mold and metal protrusions. Allowable protrusion is 0.25 mm per side.
2. Lead width dimensions “b and “ b1 do not include dambar protrusions. Allowable dambar protrusion is 0.25 mm in total per lead.
Outline
version
e5
European
projection
sot1211-2_po
Issue date
15-01-12
15-06-09
SOT1211-2
Fig 16. Package outline SOT1211-2 (HSOP16F)
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
12 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
HSOP16: plastic, heatsink small outline package; 16 leads
SOT1212-2
E
X
E3
A
D
c
B
D3
y
v
HE
A
D1
D2
e1
b1(2x)
w
16
B
(8x) METAL
PROTRUSIONS (SOURCE)
15
e6
e5
(2x)
(2x)
Q
E2
E1
A
A2
(A3)
A1 A4
pin 1 index
θ
1
H
14
Lp
detail X
e2
e
(12x)
b
(14x)
w
B
e3 (2x)
e4 (2x)
HE
0
Unit
mm
max
nom
min
A
3.9
A1
A2
A3
A4
b
b1
c
D(1)
10 mm
D1
D2
D3
E(1)
Q
v
w
E1
E2
E3
e
e1
e2
e3
e4
e5
θ
7°
3°
0°
e6
0.2 3.65
0.06 0.40 5.55 0.27 20.62 19.00 16.05 20.44 10.01 8.18 5.89 9.83
0.1 3.60 0.35 0 0.35 5.50 0.22 20.57 18.95 16.00 20.39 9.96 8.13 5.84 9.78 1.0 7.45 1.5 8.45 9.55 2.97 4.07
0 3.55
-0.02 0.30 5.45 0.17 20.52 18.90 15.95 20.34 9.91 8.08 5.79 9.73
Note
1. Package body dimensions “D'' and `'E'' do not include mold and metal protrusions. Allowable protrusion is 0.25 mm per side.
2. Lead width dimensions `'b'' and `'b1'' do not include dambar protrusions. Allowable dambar protrusion is 0.25 mm in total per lead.
3. Dimension A4 is measured with respect to bottom of the heatsink DATUM H. Positive value means that the bottom of the heatsink is
higher than the bottom of the lead.
Outline
version
y
13.5 1.10 2.07
0.1
13.2 0.95 2.02 0.25 0.25
12.9 0.80 1.97
scale
Dimensions (mm are the original dimensions)
Lp
References
IEC
JEDEC
JEITA
European
projection
sot1212-2_po
Issue date
15-01-14
15-06-09
SOT1212-2
Fig 17. Package outline SOT1212-2 (HSOP16)
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
13 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
10. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
11. Abbreviations
Table 10.
Abbreviations
Acronym
Description
AM
Amplitude Modulation
3GPP
3rd Generation Partnership Project
CCDF
Complementary Cumulative Distribution Function
CW
Continuous Wave
DPCH
Dedicated Physical CHannel
ESD
ElectroStatic Discharge
GEN7
Seventh Generation
GSM
Global System for Mobile Communications
LDMOS
Laterally Diffused Metal Oxide Semiconductor
LTE
Long Term Evolution
MMIC
Monolithic Microwave Integrated Circuit
MTF
Median Time to Failure
PAR
Peak-to-Average Ratio
PM
Phase Modulation
VSWR
Voltage Standing-Wave Ratio
W-CDMA
Wideband Code Division Multiple Access
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
14 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
12. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
BLM7G1822S-20PB_S-20PBG#4
20150901
Product data sheet
Modifications:
Change notice
Supersedes
BLM7G1822S-20PB_S
-20PBG v.3
•
The format of this document has been redesigned to comply with the new
identity guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLM7G1822S-20PB_S-20PBG v.3
20150701
Product data sheet
-
BLM7G1822S-20PB_
S-20PBG v.2
BLM7G1822S-20PB_S-20PBG v.2
20140626
Objective data sheet
-
BLM7G1822S-20PB_
S-20PBG v.1
BLM7G1822S-20PB_S-20PBG v.1
20131219
Objective data sheet
-
-
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
15 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
16 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
14. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLM7G1822S-20PB_S-20PBG#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
17 of 18
BLM7G1822S-20PB(G)
LDMOS 2-stage power MMIC
15. Contents
1
1.1
1.2
1.3
2
2.1
2.2
3
4
5
6
7
8
8.1
8.2
8.3
8.4
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 3
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Application information. . . . . . . . . . . . . . . . . . . 5
Possible circuit topologies . . . . . . . . . . . . . . . . 8
Ruggedness in class-AB operation . . . . . . . . . 9
Impedance information . . . . . . . . . . . . . . . . . . . 9
Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 12
Handling information. . . . . . . . . . . . . . . . . . . . 14
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15
Legal information. . . . . . . . . . . . . . . . . . . . . . . 16
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Contact information. . . . . . . . . . . . . . . . . . . . . 17
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLM7G1822S-20PB_S-20PBG#4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement