DaySequerra | DownMix 5.1 | User manual | DaySequerra DownMix 5.1 User manual

5.1 Surround Encoder
User Manual
Welcome Thanks for purchasing the DaySequerra DownMix. Our DTS Neural Surround™ DownMix reduces 5.1
surround sound to a stereo mix that accurately represents the 5.1 original. We design and build all of
our DaySequerra products to be completely reliable and easy to use, so you can concentrate on
producing great sounding broadcasts, not struggling with complicated equipment or difficult to use
product manuals.
While the DownMix has been designed to be straightforward to use, we do suggest that you spend a
few minutes familiarizing yourself with the features and operational functions that are contained in this
DaySequerra has been building broadcast quality products since 1989. The technology
developed for the DownMix, and all of our products, has evolved through a process of user
feedback, extensive listening, field-testing and careful refinement.
In the event that you encounter any technical or operational difficulties with this or any DaySequerra
product, please feel free to contact us at 856-719-9900. Our office hours are from 9 to 5 ET, Monday
through Friday. Or you can email your questions to:
Also, please remember to visit our website for warranty registration and the
latest DaySequerra product information.
We have worked hard to ensure that your DaySequerra DownMix will reliably serve you for years to
come. With a modular design and upgradeable firmware, your new unit is easy to install and use right
out of the box.
We sincerely hope our products help you achieve a new level of excellence in your work!
David V. Day and the DaySequerra Team
DaySequerra | 154 Cooper Rd. #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | |
2 DownMix User Manual Table of Contents Important Safety Information
Service Information
DownMix Technical Specifications
Operational Diagram
Typical Applications
Unpacking and Installation
Front Panel
Rear Panel
Meter Display
Home Screen
Programming Menu
Menu Tree
System Menu Functions
Firmware Update Procedure
DownMix Key Features •
Brings the excitement of surround sound to your audience without replacing any
Active correction to fix issues such as comb filtering, spatial location and
The conveniences of a matrix surround encode/decode system with the
performance of modern day perceptual audio codecs.
Backward compatibility with matrix decoders (Dolby® ProLogic II, SRS Circle
Surround, etc.).
UpMix decoders featuring the DTS Neural UpMix Technology are now available in
over 70% of consumer AV receivers worldwide. The decoder will up-mix the signal
to the proper format for the user’s setup.
Two channel audio stream can be edited, stored, or transported just like any
standard stereo stream on your current equipment without virtually any loss in
All rights reserved DaySequerra Corp. Copyright 2010.
All logos and trademark used herein are the property of their respective owners.
Specifications subject to change.
DownMix User Manual Revision B for firmware 3.17.09.
DownMix User Manual 3 Important Safety Information •
Indoor use only. Not for use in wet or damp environments.
Maximum Relative Humidity: <80%
Class I Equipment (grounded type)
Electrical rating: 100-260V~50-60Hz 25W max
Internal circuit breaker for continuous short circuit protection.
AC Mains supply voltage fluctuations are not to exceed +10% of the nominal voltage
Operations temperature range -40°C to 70°C
Maximum altitude: 3000m (9843ft)
Equipment suitable for continuous operation
Weight: 3.6kg (8lbs) equipment only; 5.4kg (12.0lbs) shipping
Important Note: Please connect your DownMix to an uninterruptible power supply (UPS) to
provide other protection against power surges and low-voltage conditions.
If DownMix is subjected to a strong RFI field, such as those emitted from portable two way
radios, the display may “blank out”. To restore the display without rebooting the unit, turn the
rotary encoder to activate the main menu, and then press HOME. If the keylock is enabled, you
will have to deactivate it by pressing the ENTER key followed by BACK.
Service Information The DaySequerra DownMix contains no user serviceable components inside the unit. Please contact
DaySequerra for repair and upgrade information. In the event that your unit needs to be returned to the
factory, contact us for a return authorization number.
Please visit and
register your new DownMix so we can keep you informed of the latest hardware and software
The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltages” within the product’s enclosure that may be of a sufficient level
to cause harm.
The exclamation point within a triangle is intended to alert the user to the presence of important
operating and maintenance instructions within the
product literature.
Exposed portions of the power supply assembly are
electrically live. To reduce risk of electric shock, the
power cord must be disconnected when the power
supply assembly is removed. For continued
protection against electric shock, a correctly wired
and grounded (earthed) three-pin power outlet must
be used. Do not use a ground-lifting adapter and
never cut the ground pin on the three-prong plug.
The ground terminal of the power plug is connected
directly to the chassis of the unit.
4 DownMix User Manual Technical Specifications
Latency of the DTS Algorithm:
Power Consumption:
Sample Rate:
Dynamic Range:
<16ms at 48k sampling rate
25W Maximum
Rack Mount; 1 RU (1.75” x 19” x 10.75”)
32kHz-96kHz, 24-bit
140dB, DR any input to any output
DB-9 Female, 0-5V TTL opto-isolated
North America: Designed to comply with FCC Class
A part 15 requirements.
Europe: Designed to comply with LV Directive
73/23/EEC and EMC Directive 89/336/EEC; CE Mark
(EN 55022 Class A, EN55024); Designed for RoHS
and WEEE compliance.
FCC Part 15 Regulatory Statement This equipment has been tested and found to comply with the limits for Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction's manual, may cause interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference in which case the user will be required to
correct the interference at their own expense. The user is cautioned that changes and modifications
made to the equipment without approval of the manufacturer could void the user's authority to operate
this equipment. The user should use only shielded and/or grounded cables to combat sources of
Environmental Preservation Efforts This equipment has been designed and built by DaySequerra corporation to give many
years of trouble free service and is backed by our three year warranty and commitment
of providing the best customer support. When the time comes to retire your product
from service, it should be disposed of in accordance with local codes or ordinances. Do
not discard with household or commercial waste.
DaySequerra products are manufactured with the environment in mind. The
Directive on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (2002/95/EC) restricts the use of six specific hazardous
materials in the manufacture of various types of electronic and electrical equipment.
Following this directive prevents these toxic substances from entering our
environment after disposal.
DownMix User Manual 5 Introduction
The DaySequerra DownMix enables 5.1 surround sound to be transported through any stereo
infrastructure using the DTS Neural Audio process. Because DownMix renders sound independently of
the transport environment, it will compliment analog, digital, linear or compressed mediums. The
process is based upon the principle that both natural stereo and 5.1 content are two dimensional; both
contain width and depth spatial attributes. DownMix can represent six channels of discreet audio
sources into a stereo down mix by transforming the sources to pure intensity and coherence encoding.
By correcting overlaps of the signal sources in intensity, time, coherence, polarity, and phase before the
six channels are combined, DownMix accounts for the problems suffered in traditional matrix encode
systems (comb filtering, spatial location distortion, etc).
This proprietary DTS Neural Audio process, or “watermark process” guarantees that surround
information is faithfully reproduced when later rendered by the DaySequerra UpMix or any Lt/Rt
system. In brief, DownMix produces a stereo mix that accurately represents the original content
whether monitored in mono, stereo, matrix or DTS Neural 5.1 Surround Sound.
Operational Diagram The diagram below shows a DownMix taking a multi-channel audio source and creating two-channel
audio using the proprietary DTS Neural Audio process of embedding a watermark signal within the
stereo audio signal patch containing spatial and steering positioning information. The resulting stereo
audio signal is also known as Lt/Rt.
This approach to down mixing the audio into a two channel signal ensures that it can be transmitted
through any stereo-capable distribution system. Since the audio output is watermarked, it may be re-up
mixed again into the original format.
6 DownMix User Manual Typical Applications Here are some examples that describe some typical applications where you might use DownMix.
FM Radio Production Studio A typical application of DownMix is to create a watermarked stereo signal from multi-channel original
content originating from a computer with a multi-channel sound card, Stereo Automation or Storage
System, or direct from your Digital Production Console.
The audio can be transmitted through and stored on your standard two channel equipment, and will be
capable of conversion back to the original multi-channel content. Backwards compatibility is built in—
your listeners with stereo equipment will receive stereo audio, while those using decoders with DTS
Neural Technology will have the best sound experience.
Stereo Television Master Control Another application of DownMix is in a stereo television master control room setup. DownMix allows
encoding of original multi-channel content into a watermarked stereo audio signal that can be easily
transported throughout a complete infrastructure and later rendered to the original multi-channel
content if needed.
Streaming Media DownMix can be used to create a watermarked stereo signal for distribution over the internet in either a
streaming or video-on-demand format. Simply use DownMix before the media gets encoded for digital
transmission. The DTS Neural process will make sure that the best surround experience will be
reproduced at the lowest bandwidth cost.
DownMix User Manual 7 Installation
Immediately upon receiving your DownMix, please make a careful inspection for any shipping damage.
If damage is found or suspected, please notify the carrier at once and then contact your dealer.
DownMix is shipped in one carton, which contains: the DownMix unit, two AC power cables and this
Users Manual.
We strongly encourage you to save the shipping carton and shipping materials supplied with your
DownMix. They are specially designed to properly protect your DownMix, and in the event that you
need to return it for service, only these OEM shipping materials can ensure its safe return to our
We provide a limited 3-year warranty on all of our products; however, if you don’t register your unit, it is
impossible for us to contact you to notify you when important software upgrades become available.
Please take a few minutes to complete the warranty registration form on our website,
Rack Mount Installation The DownMix chassis has four rack mounting holes and has been designed to fit in a standards 1RU
space. Plastic ‘finishing’ washers are recommended to protect the painted surface around the mounting
holes. Locate the air vents on each side of the unit, and be sure to keep them clear so the unit may
have adequate ventilation.
Power Connection The AC power cable supplied with DownMix must be connected from the IEC320 power entry module
to an AC mains outlet with a functional earth ground connection. For protection against electric shock
and electro-magnetic interference, do not plug the power cable into a ground lifting adapter or remove
the cable’s grounding pin. If in doubt, please consult a qualified electrician.
DownMix is designed with redundancy in mind with two internal auto switching power supplies. Please
connect DownMix to an uninterruptible power supply (UPS) to protect against power surges and
low-voltage conditions. For maximum redundancy, connect each power supply to a separate UPS on
different power circuits. DownMix may be combined with other devices on the output of the UPS(es) as
long as the total load is within the UPS’ capacity. Consult your UPS manual for details.
DownMix will automatically power up when AC power is applied. If AC line power is lost or
momentarily interrupted, DownMix will revert to its previous state.
8 DownMix User Manual Front Panel
Bargraph Meters
INPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel of
the inbound audio stream.
OUTPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel
of the down mixed audio stream.
Status Indicators
AES LOCK - Green LED indicator illuminates when DownMix has acquired a
valid AES3 digital input signal.
AES ERROR - Red LED indicator illuminates when DownMix has lost or
receives an invalid AES3 digital input signal.
FAULT - Red LED indicator illuminates when DownMix has discovered a fault.
An error message will be displayed on the display, or fault status may be
viewed under the DIAGNOSTICS menu.
7.1 MODE - Blue LED indicator illuminates when DownMix is operating in 7.1
channel input mode (not supported at this time).
Display and Controls VACUUM FLUORESCENT DISPLAY - A Multi-function display that indicates current operating status
of the unit and programming menus.
ROTARY ENCODER - A stepping optical rotary encoder is used to select values while in the menu
system. To enter the menu, simply rotate the rotary encoder in any direction while DownMix is on the
HOME screen.
ENTER KEY - Used to enter a menu or confirm a selection. This key will also clear an error message
display from the home screen.
HOME KEY- A press of this button will return DownMix to its home screen, or enter home screen
selection mode.
BACK KEY – A press of this key will return to a previous menu, or if you are entering a value, exit the
field and return the value to the last programmed state.
DownMix User Manual 9 Rear Panel AES INPUTS - Four 75Ω BNC connectors will accept an AES3 digital audio stream.
AES OUTPUTS - Three 75Ω BNC connectors output the down mixed AES3 digital audio stream.
AES SYNC - Two 75Ω BNC connectors that allow DownMix to receive an AES REF or DARS
clock signal from an external source and pass it on to other devices.
The AES-3id-1995/SMPTE 276M standard dictates a 75Ω unbalanced connection and requires
proper termination. The termination should occur at the destination of the signal (that is, on the
inputs to DownMix). If the loop-through BNC connectors are not feeding additional equipment,
terminate each of these with a standard 75Ω terminator. Like other inputs, AES SYNC signal
should be terminated.
GPIO – A Female DB-9 connection that allows DownMix to be monitored or controlled externally.
Opto-isolated inputs will be triggered by a voltage of 5VDC.
Output Relay 1 N.O.
Relay 1 Common
Optical Input 0
Optical Input 1
Optical Input
Output Relay 2 N.O.
Relay 2 Common
Optical Input 2
Optical Input 3
DB-9 Female Port
on DownMix Rear Panel
Output 1: Relay 1 is Normally Open. Upon a hardware failure (i.e. Power Supply or Internal
Communications Failure), the relay will close. When the failure is remedied, the relay will open.
Output 2: Relay 2 is Normally Open. Upon an AES lock loss failure, this relay will close. When
the failure is remedied, the relay will open.
10 DownMix User Manual Input 1: Voltage detected on this input will cause DownMix to go into pass-though operating
Input 2: Voltage detected on this input will have DownMix take the input audio signal and downmix into Lt/Rt.
Input 3: Unused at this time.
Input 4: Unused at this time.
NETWORK - Used to update DownMix’s firmware. To connect directly to a PC without use of a network
switch or hub, a crossover cable is required. Firmware updating is accomplished via UDP Port 44600.
PSU 1 / PSU 2 - Two IEC320 ports to connect to AC Mains. The internal power supplies are auto
switching and will work on 120VAC-60Hz or 240VAC-50Hz electrical power systems with a maximum
total current draw of 25W (>.25A 120VAC or >.15A 240VAC).
Please connect DownMix to a properly grounded uninterruptible power supply (UPS) to protect
against power surges and low-voltage conditions. For maximum redundancy, connect each power
supply to a separate UPS on different power circuits. DownMix may be combined with other devices on
the output of the UPS(es) as long as the total load is within the UPS’ capacity. Consult your UPS
manual for details.
DownMix User Manual 11 Meter Display Figure 1. Metering display DownMix.
INPUT LEVELS – LED display shows current amplitude of input signal from
-60dB to 0dB across all active channels. Unused channels will not light the display.
L - Left (AES Input 1)
R - Right (AES Input 2)
C - Center (AES Input 3)
LFE- Low Frequency (AES Input 4)
Ls - Left Surround (AES Input 5)
Rs – Right Surround (AES Input 6)
OUTPUT LEVELS – LED display shows current amplitude of signal generated by DownMix across all
active channels. Unused channels will not light the display.
L - Left (AES Output 1)
R - Right (AES Output 2)
C - Center (AES Output 3)
LFE- Low Frequency (AES Output 4)
Ls - Left Surround (AES Output 5)
Rs – Right Surround (AES Output 6)
Items in italics are used when DownMix is configured to take a 7.1 audio stream and create a 5.1
audio stream (not supported in this code release).
12 DownMix User Manual Home Screen Figure 2. Home Screen on DownMix.
DownMix has been designed with ease of use in mind. Most of the common settings are available for
modification right on the home screen. While the unit is at this screen, press the HOME key to invoke
home screen selection mode; a selection box will appear. Turn the rotary encoder to move the box to
the desired field to be changed and press the ENTER key to modify the value. Rotating the encoder
again will cycle through the available options. Press ENTER again to confirm selection, or BACK to
revert the setting to the last saved value. Pressing the HOME or BACK keys exits home screen
selection mode.
1. Center Mode: Tells DownMix to use a discreet center channel (Hard Center) or mix the center
into the left and right channels (Phantom).
2. Sample Rate: Shows the sample rate DownMix has detected from the clock source. When field
6 is set to INTERNAL, this field may be modified to the desired rate. (1/2, 3/4, 5/6, INT or EXT
3. Input Mode: Defines what kind of signal DownMix is looking for. (Stereo, 5.1, Pass-through)
4. Stereo Output: Defines what physical BNC port DownMix will send the audio output stream to.
(1/2, 3/4, 5/6)
5. Clock Source: Will display the port that DownMix is using for AES Reference timing. This will
be represented as a port number, internal or external.
DownMix User Manual 13 Programming Menu If AC line power is lost or momentarily interrupted, DownMix will revert to its previous state.
To enter the programming menu, turn the rotary encoder in any direction while at the HOME screen.
The ENTER key will enter the currently selected sub menu or enter the value mode for the selected
option. A press of the BACK key will navigate to the previous menu level or revert the current value to
its last stored state.
Menu Tree Figure 3. Visual Map of DownMix Menu System.
14 DownMix User Manual Menu Functions and Descriptions While at the home screen, and not in home screen selection mode, rotate the encoder in any direction
to enter the menu. From this screen you may navigate to the rest of the menu by selecting SYSTEM
MENU. Also displayed are keylock controls and channel audio adjustments.
Selecting KEYLOCK from this menu will lock the front panel controls of the unit immediately. KEYLOCK
SETTINGS sub-menu contains a time-out setting that will enable automatic locking of the controls after
a user-specified time period has elapsed. To disable automatic keylock, select “OFF” from this menu.
Channel Audio Adjustment: Performs fine adjustment of the audio levels for the following audio
channels (0 to -12dB):
Output Lt/Rt Gain – Lt/Rt two channel stereo output level
Input L/R Gain - Left Front and Right Front input level
Input LFE Gain - Low Frequency Effects input level
Input C Gain - Center channel input level
Input Ls/Rs Gain – Left Surround and Right Surround input level
Input Lb/Rb Gain – Left Back and Right Back input level (not supported)
Systems Menu Navigating to SYSTEM MENU after entering the Main Menu will allow you to change all values to fine
tune the operation of your DownMix.
Settings Menu
LFE Function: Defines how DownMix will treat Low Frequency Effects. (Normal or Mute)
LFE Cutoff: Adjusts low-pass filter for Low Frequency Effects. (0-140Hz in 20Hz Increments)
Output Limiter: Allows DownMix to reduce the level of the output stream. (0dB to -20dB)
Output Mode: Sets the output mode of DownMix. (Stereo)
DownMix User Manual 15 Network Menu DownMix has several configurable network settings. All of the DownMix network settings are password
protected. The password to change the network settings is dnmix123. Please take note when entering
the password that the DownMix password is case sensitive. DownMix is configured to take a DHCP
address by default.
Device Name: Allows you to change DownMix’s name as reported to DNS. Press ENTER while the
cursor is over this field to go into data entry mode. Turn the rotary encoder to scroll through the
available choices of letters (A-Z, 0-9 and _ (underscore)) and press enter to move on to the next field.
Turning the rotary encoder again will start to scroll through the choices for the next letter, or pressing
ENTER accepts the name.
DHCP: Configures DownMix to look for a DHCP server for IP configuration. (Enabled or Disabled)
IP Address: If DHCP is set to disabled, allows you to enter the desired IP address manually. Press
ENTER while the cursor is over this field to go into data entry mode. Scroll through the available
numbers (0-255) and press ENTER to move to the next octet.
MAC Address: Displays DownMix’s MAC address if needed for firewalls or DHCP IP address
Diagnostics Menu Current Faults: Displays any error states that DownMix may be in.
DSP Utilization: Shows the current load on DownMix’s processor.
LED Test: Turns on all front-panel LED indicators to verify their functionality.
Meter Brightness: Allows adjustment of DownMix’s Input and Output meters.
Display Brightness: Allows adjustment of DownMix’s display output.
Restore Settings: Returns all settings to their factory default values and reboots the unit. Network
settings will not be lost.
Reboot Unit: Performs a warm boot. No settings are erased or restored to defaults.
GPIO Output: Allows for testing of the internal signaling circuit within DownMix. The two fields
displayed represent each output, 1 and 2, respectively.
GPIO Input: Shows the current state of the GPIO inputs. The four fields of the displayed status
represent each input, 1-4, respectively.
16 DownMix User Manual Alarms Menu All alarms are disabled by default at the factory. To take advantage of this function, the desired settings
need to be enabled. AES Lock: Allows the AES Lock alarm to be suppressed.
PSU Alarm: Allows the Power Supply alarm to be suppressed.
About Menu Model Number: Displays the model number of the unit.
Serial Number: Displays the serial number of this unit.
Hardware Rev: Displays the hardware revision level of this unit.
Firmware Rev: Displays the firmware revision level that is running on this unit.
DTS Algorithm: Displays the specific DTS algorithm running.
DTS Algorithm Rev: Version of the DTS algorithm running on this unit.
Although your DownMix will provide you with years of trouble free service, occasionally problems may
occur. Below is a listing of the most common fault conditions.
PSU-x Failed: One of the redundant power supplies has failed and your unit requires service. Please
contact DaySequerra to arrange for repair.
No Sync: AES sync has been lost. Please check the source equipment and all cable connections.
Ensure that DownMix is operating in the proper input mode for your application and is looking for the
source audio on the correct port.
CRC Error: DownMix has encountered a CRC error in the audio stream.
Validity Error: DownMix has encountered a validity error with the audio stream.
Bi-phase Error: DownMix has encountered a bi-phase error with the audio stream.
No Parity Error: DownMix has encountered a parity error with the audio stream.
DownMix User Manual 17 Firmware Update
Provided that you have completed warranty registration for your DownMix on our website, we will notify
you as new firmware updates become available. The notification will contain the announcement of new
firmware, issues corrected, and instructions on how to retrieve the update files.
Update packages will be available as a single .ZIP file for download. Compatible archive programs
include Winzip ( or WinRAR ( and may be downloaded from their
respective websites. The update package will contain four files; dsp2533.bin, firmdown.exe, readme.txt
and update.bat.
Firmware updating is accomplished via UDP Port 44600. At this time, updating is only supported by
using a cross-over cable directly connected to one PC. If your PC has multiple network interface
adapters, each additional adapter will need to be disabled before attempting to upgrade your unit. You
may also wish to disable your firewall during the upgrade process. For additional support with
networking, please contact your network administrator.
If the flash procedure is interrupted before it can complete, DownMix may be left in an un-usable state
and will need to be returned for factory service.
Please follow these steps to upgrade your unit:
1. Un-Zip the files using a compatible utility that can handle ZIP archive file format into a new
empty directory on your PC.
2. Disable any additional network interface adapters present on your PC. Go to Control Panel,
then Network Connections. Right click on the adapter to be disabled and select Disable.
3. Unplug your PC from the network it is currently connected to.
4. If your PC’s network interface is set up for DHCP, disable it and enter a static IP address. While
in Network Connections under Control Panel, right click on the network interface and select
Properties. Select “Internet Protocol (TCP/IP)” and press the Properties button. On the general
tab of the dialogue box, select “Use the following IP address”. Enter an IP address in the box “IP
Address” within the local network range. (Example: Click in the “Subnet mask” box
and it should auto populate with Select OK to close the dialog, and then OK to
close the properties box.
5. If DownMix is set up for DHCP, disable it and enter a static IP address within the local network
range. (Example: Details are available in the NETWORK section of this manual.
6. Connect the DownMix to the PC using a crossover Ethernet cable.
7. When Windows has acknowledged the Ethernet connection, you may start the update progress
by double clicking on upgrade.bat. DownMix should download the new firmware and reboot
within 30 seconds.
8. Disconnect the cross-over cable and return your PC and DownMix to their original
18 DownMix User Manual DaySequerra – Three Year Limited Warranty
DaySequerra warrants this product to be free from defects in materials and workmanship to its original owner for
three (3) years from the date of purchase. DaySequerra will repair or replace such product or part thereof that
upon inspection by DaySequerra, is found to be defective in materials or workmanship subject to conditions
contained herein.
DaySequerra products are sold worldwide, through a network of authorized DaySequerra dealers and distributors.
This Warranty is for the sole benefit of the original purchaser of a DaySequerra product, purchased directly from
an authorized DaySequerra dealer or distributor, is restricted to such original purchaser, and shall not be
transferred to a subsequent purchaser of the product. Proof of purchase in the form of a bill of sale or receipted
invoice substantiating that the product was purchased directly from an authorized DaySequerra dealer or
distributor and is within the warranty period must be presented to obtain warranty service. Removal or alteration
of the original DaySequerra serial number from a product automatically renders that product warranty null and
A Return Authorization Number must be obtained from DaySequerra in advance of return. Parts or product for
which replacement is made shall become the property of DaySequerra. The customer shall be responsible for all
costs of transportation and insurance to and from the DaySequerra factory, and all such costs will be prepaid.
DaySequerra shall use reasonable efforts to repair or replace any product covered by this limited warranty within
thirty days of receipt. In the event repair or replacement shall require more than thirty days, DaySequerra shall
notify the customer accordingly. DaySequerra reserves the right to replace any product that has been
discontinued from its product line with a new product of comparable value and function.
This warranty shall be void in the event a covered product has been damaged, or failure is caused by or
attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions,
improper installation or maintenance, alteration, or lightning, power fluctuations and other incidental or
environmental conditions. Further, product malfunction or deterioration due to normal wear is not covered by this
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how
long an implied warranty lasts, so the above limitations and exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from state to state. DaySequerra reserves
the right to modify or discontinue, without prior notice to you, any model or style product. If warranty problems
arise, or if you need assistance in using your product contact:
154 Cooper Road, Building 902
West Berlin, NJ 08091
For more information, please call 856-719-9900, visit or email us at
DaySequerra | 154 Cooper Rd. #902 | W. Berlin, NJ 08091 | Voice 856-719-9900 | Facsimile 856-719-9903 |
Manufactured under license from DTS Licensing Limited. DTS is a registered trademark & the DTS
Logos and Symbol are trademarks of DTS, Inc. © 2008-2009 DTS, Inc. All Rights Reserved.
20 DownMix User Manual 
Download PDF