QuickSpecs Serial ATA Hard Drives for HP Desktop PCs Overview Models 40-GB SATA 1.5-Gb/s 7200 rpm Hard Drive 80-GB SATA 1.5-Gb/s 7200 rpm Hard Drive 160-GB SATA 1.5-Gb/s 7200 rpm Hard Drive PB371A DE705A DE706A Introduction Serial ATA Hard Drives maximize the performance of HP Business PCs by providing the technologies to meet your increasing storage demands. These high-capacity drives offer superior reliability and performance. Serial ATA is the next generation ATA interface. It provides faster data transfer speeds, enhanced system cooling airflow, more bandwidth, more headroom for speed increases in future generations and better data integrity helping to improve productivity. A next-generation technology, Serial Advanced Technology Attachment (SATA) interface connects hard drives to the PC platform. SATA point-to-point topology provides a direct path between the hard drive and the PC enabling easy aggregation of multiple hard drives into a single PC. This offers you the additional benefits of dedicated bandwidth, the ability to more easily identify device failures and scalability. Serial ATA Hard Drives offer data transfer rates of up to 1.5 Gb per second. SMART III technology Self Monitoring Analysis and Reporting Technology (SMART) hard drive technology is designed to allow hard drives to monitor their own health and to raise flags if imminent failures are predicted. If the drive determines that a failure is imminent, the SMART hard drive technology enables the intelligent manageability or management software to generate a fault alert. The latest SMART III hard drive technology uses "off-line data collection" to monitor the entire hard drive during periods of inactivity. This SMART III technology offers greater data integrity over SMART II because the entire hard drive is monitored for bad sectors whereas with SMART II only monitors hard drive activity for data that is retrieved by the operating system. An alert is sent over the network to the system administrator and Insight Manager. These alert messages give the user or administrator time to back up the hard drive and replace it prior to experiencing possible downtime or loss of data. NOTE: GB = 1 billion bytes. Actual available capacity is less. Performance Serial ATA Hard Drives offer data transfer rates of up to 1.5 Gb per second. Benefits Serial ATA hard drives brings these powerful benefits for storage solution Improved protocol for better data integrity Performance increase to 1.5 Gb/s maximum external (burst) data transfer rate Thinner and smaller serial cables and connectors for easy routing and improved system cooling Maximum cable length increased from 1.5 feet to 1 meter (3.28 feet) for increased design and layout flexibility in a system Features SMART and Drive Self Test hard drive technology Compatibility Serial ATA 1.5-Gb/s Hard Drives are compatible with HP Compaq d330, d530, dx5150, dx6100, dc5000 and dc7100 Business Desktops. NOTE: Not all hard drive models are available in all regions. DA - 11957 North America — Version 4 — May 13, 2005 Page 1 QuickSpecs Serial ATA Hard Drives for HP Desktop PCs Overview Service and Support Your Option Limited Warranty is a one (1) year (HP Option Limited Warranty Period) parts replacement warranty on any HP-branded or Compaq-branded options (HP Options). If your HP Option is installed in an HP Hardware Product, HP may provide warranty service either for the HP Option Limited Warranty Period or the remaining Limited Warranty Period of the HP Hardware Product in which the HP Option is being installed, whichever period is the longer but not to exceed three (3) years from the date you purchased the HP Option. DA - 11957 North America — Version 4 — May 13, 2005 Page 2 QuickSpecs Serial ATA Hard Drives for HP Desktop PCs Technical Specifications Hard Drives 160 GB Capacity Height Width Interface Synchronous Transfer Rate (Maximum) Cache Seek Time (typical reads, includes controller overhead, including settling) Rotational Speed Logical Blocks Operating Temperature 80 GB Capacity Height Width Interface Synchronous Transfer Rate (Maximum) Cache Seek Time (typical reads, includes controller overhead, including settling) Rotational Speed Logical Blocks Operating Temperature DA - 11957 171,798,691,840 bytes 1 in (2.54 cm) Media diameter: 3.5 in (8.89 cm) Physical size: 4 in (10.2 cm) Serial ATA Up to 1.5 Gb/s 8 MB Single Track 0.9 ms Average 9.3 ms Full-Stroke 18 ms 7,200 rpm 312,581,808 41° to 131° F (5° to 55° C) 85,899,345,920 bytes 1 in (2.54 cm) Media diameter: 3.5 in (8.89 cm) Physical size: 4 in (10.2 cm) Serial ATA Up to 1.5 GB/s 8 MB Single Track 0.9 ms Average 9.3 ms Full-Stroke 18 ms 7,200 rpm 153,301,488 41° to 131° F (5° to 55° C) North America — Version 4 — May 13, 2005 Page 3 QuickSpecs Serial ATA Hard Drives for HP Desktop PCs Technical Specifications 40 GB Capacity Height Width Interface Synchronous Transfer Rate (Maximum) Cache Seek Time (typical reads, includes controller overhead, including settling) Rotational Speed Logical Blocks Operating Temperature 40,020,000,000 bytes 1 in (2.54 cm) or less Media diameter: 3.5 in (8.89 cm) Physical size: 4 in (10.2 cm) Serial ATA Up to 1.5 Gb/s 2 MB Single Track 1.0 ms Average 8.5 ms Full-Stroke 18.0 ms 7,200 rpm 78,165,360 41° to 131° F (5° to 55° C) © Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA - 11957 North America — Version 4 — May 13, 2005 Page 4
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement