CORBERO LV 6031 Instruction manual

MANUAL DE INSTRUCCIONES
INSTRUCTION BOOKLET
LAVAVAJILLAS
DISHWASHER
LV 6031
Attention
The appliance which you have just bought is supplied not only with this instruction manual, but also with a
Warranty Card Certificate, on the back of which are written the relative conditions.
Please fill in the necessary details on the Card Certificate and send it to the Corberó Centre relative to the
area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Corberó
network centres).
We congratulate you on your choice. Carefully read this instruction manual and follow attentively the
recommendations it provides, and thus benefit from years of excellent service.
The appliance which you have just purchased has been very accurately controlled throughout the entire
manufacturing process. Nevertheless, should any problem arise during usage, whether it be during the
warranty period, or when such period has expired, please directly contact your nearest Corberó Service
Centre.
The address and telephone number of said Centre can be easily found in the enclosed List or by looking in the
telephone directory, under Corberó.
Our Corberó Service Network is at your complete disposal, to serve you with maximum speed and efficiency,
all you have to do is call.
The products
In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers.
To ensure that your dishwasher functions perfectly, Corberó recommends using Calgonit System, a unique and
complete product, tested by millions of householders.
Calgonit System includes Calgonit detergent, rinse aid, salt, machine detergent and Citro-Fresh.
It is able to fulfil the main requirements for clearing both the crockery and the machine itself.
23
GAR01en
Contents
For the user
For the installer
Important safety information
25
Description of the appliance
26
The control panel
26
Before use
Setting the water softener
Rinse aid
27
27
29
Using your appliance
Loading your appliance
Use of detergent
30
30
32
Hints and tips
33
Washing programmes
34
Operating sequence
35
Maintenance and cleaning
Internal cleaning
Cleaning the central filter
Cleaning the large filter
External cleaning
Prolonged periods of non-operation
Frost precautions
Moving the machine
36
36
36
36
37
37
37
37
Something not working
Service and spare parts
38
39
Hints for test centres
Technical specifications
40
40
Installation instructions
Water supply connections
Water outlet connection
Electrical connection
41
41
42
42
Adjusting the worktop
Fitting under a counter
Levelling
Fitting a decor panel on the door
43
43
43
43
Guide to use the instruction book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
1. 2. 3.
Step by step
Hints and tips
Environmental information
24
IND08en
Important safety information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before
installing or using the appliance.
Installation
●
This appliance is heavy. Care should be taken when
moving it.
●
It is dangerous to alter the specifications or attempt
to modify this product in any way.
●
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
●
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
●
Do not sit or stand on the open door.
●
Isolate the appliance from the power supply and
turn off the water supply after use.
●
Care should be taken when cleaning the bottom
door seal and hinge area as any exposed metal
edges may cut if care is not taken.
●
This product should be serviced by an
authorised Service engineer, and only genuine
spare parts should be used.
●
Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre. Always insist on genuine
spare parts.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Child Safety
●
●
Conservation
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
●
Keep all packaging well away from children.
●
Keep all detergents in a safe place out of children's
reach.
In the interest of the environment:
●
Materials marked with the symbol
recyclable.
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
●
When the appliance is to be scrapped, cut off
the power supply cable and make the door
closing device unusable to prevent young
children from being trapped inside.
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
During Use
●
Items that are contaminated by petrol, paint, steel
or iron debris, corrosive, acidic or alkaline
chemicals must not be washed in this dishwasher.
●
Under no circumstances should you open the door
whilst the appliance is in operation. Always turn off
the appliance before opening the door.
●
Only use detergent specifically designed for use in
dishwashers.
●
Long blades knives stored in an upright position are
a potential hazard.
●
Long and/or sharp items of cutlery such as carving
knives must be positioned horizontally in the upper
basket.
●
When finishing loading or unloading close the
door, as an open door can be a hazard.
25
are
AVV01en
Description of the appliance
1.
Water hardness adjustment
2.
Levelling spacers
3.
Upper basket stop
14
1
4.
Salt container
2
5.
Large filter
3
6.
Detergent dispenser
7.
Control panel
8.
Rating plate
9.
Rinse aid dispenser
13
12
11
4
10
5
10. Central filter
11. Lower spray arm
6
9
12. Upper spray arm
13. Upper basket
8
14. Worktop
7
IN68
The control panel
1
2
3
4
1. On/Off indicator light
5
6
7
7. Programme sequence indicator
As the programme progresses, the programme
selector dial turns, to show the phase in the
wash programme the appliance has reached.
2. On/Off pushbutton
3. Programme guide
Prewash /Rinse and hold
4. Door handle
Wash
5. Programme marker
Cold rinse
6. Programme selector dial
Hot rinse
Drying
26
APP12en
Before use
Before using your dishwasher for the first time:
1. ensure that the electrical and water connections
comply with the installation instructions
2. remove all packaging from inside the appliance
3. set the water softener
4. pour 1 litre of water inside the salt container and
then fill with salt
5. fill the rinse aid dispenser.
Water hardness
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the water
supply, which would have a detrimental or adverse
effect on the operation of the appliance.
The higher the content of these salts, the harder your
water is.
Water hardness is measured in equivalent scales,
German, French degrees and PPM (parts per Million).
The softener should be adjusted according to the
hardness of the water in your area. Your local Water
Authority can advise you on the hardness of the water
in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener
should be adjusted.
German
degrees
(°dH)
French
degrees
(°TH)
PPM
(Parts per
Million)
Level
Use of
salt
0-4
0-7
0 - 80
0
NO
5 - 11
8 - 25
81 - 200
1
YES
12 - 22
26 - 40
201 - 400
2
YES
23 - 34
41 - 60
401 - 600
3
YES
35 - 50
61 - 90
601 - 900
4
YES
51 - 67
91 - 120
901 - 1200
5
YES
If your water is level 0 it is already soft
and therefore there is no need to use salt.
In this case adjust the water softener on
level 1 without using salt.
To adjust the water softener
3
4
With a screwdriver turn the selector on the upper front
corner of the machine until the level required
corresponds with the marker.
5
2
2
1
AA05
27
PDU06en
Filling with salt
Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in dishwasher, especially
table salt, will damage the water softener.
Only fill with salt just before starting one of
the complete washing programmes (not the
Rinse and Hold programme). This will
prevent any grains of salt or salty water,
which may have been spilled, remaining on
the bottom of the machine for any period of
time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
LE
SA LT
SA LZ
SA L
SE
2. Pour 1 litre of water inside the container (this is
necessary only before filling with salt for the
first time).
3. Then using the funnel provided, pour in the salt
until the container is full.
Do not worry if water over flows from the unit when
filling with salt, this is quite normal.
4. Replace the cap making sure that there is no trace
of salt on the screw thread or on the gasket.
SR06
5. Screw on the cap tightly.
The salt container will require topping up periodically.
The salt cap has a refill indicator window in the centre.
A green float is clearly visible when there is salt inside
the container, and almost disappears when the salt
has finished reminding you to add salt.
SR11
28
SAL02en
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door,
holds about 110 ml of rinse aid, which is sufficient for
16 - 40 dishwashing programmes, depending upon the
dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is completely
full. The indicator (B) will be completely dark.
A
3. Top up the rinse aid when the indicator (B)
because clear.
BR01
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid department.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the
next wash.
x 6 5 4 3
2 1
m
a
B
Adjusting the dose
BR03
C
x
6 5 4 3
2 1
m
a
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage).
Start from position 3.
Gradually increase the dose if there are drops of water
or lime spots on the dishes after washing. Reduce it if
there are sticky whitish streaks on the dishes.
BR02
29
BRI01en
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.
Do not load very small items which can fall
through the baskets.
The lower basket
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the upper
spray arm can turn freely.
UI05
The cutlery basket
UI19
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
UI04
30
CES08en
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses.
Arrange items on and underneath the fold-down cup
racks so that water can reach all surfaces.
Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.
Before closing the door, ensure that the
spray arms can rotate freely.
US33
After loading your machine always close
the door, as an open door can be a hazard.
31
CES09en
Use of detergent
Only use detergents specifically designed
for use in dishwashers.
If using powder detergents proceed as follows:
Min = 15 g
Max = 30 g D
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the
recommendations in the programme chart. As all
detergents are not the same, you should also
consult the instructions on the packet.
3. Always close the lid.
4. If the programme has a prewash add the required
detergent over the lid of the dispenser.
M
M IN
AX
DE17
If using detergent in tablets proceed as follows:
1. For all programmes; place 1 tablet inside the
detergent dispenser.
2. Always close the lid.
3. For all programmes with prewash; place a portion
of a further tablet on the lid of the detergent
dispenser.
DE02
Insufficient quantities of detergent will
produce poor washing results, whereas an
excessive amount of detergent will not
improve washing results and is also
wasteful.
Using no more than the correct amount also
contributes to reducing pollution.
Compact detergents with enzymes
In these low-alkaline compact powders the
environment unfriendly components have been
replaced by natural enzymes and other more
biodegradable substances.
These new compact powders are generally
phosphate-free.
As phosphates have water softening properties, we
suggest you add salt to the salt container even if the
hardness of your water is as low as 4°dH (7°TH).
This will avoid lime deposits on crockery and the inner
tub.
32
DET03en
Hints and tips
To save energy
Items not suitable for
dishwashers
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart) so that any food scraps
do not become caked on the dishes while you are
waiting to run the complete wash programme.
Do not prewash dishes under running water.
Select a quick programme when dishes are not very
soiled, following the instructions given in the "Washing
programmes" chart.
The following items should not be washed in
the dishwasher (unless they are sold as
dishwasher proof):
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
- crystal ware
- leaded glass
- plastic items
- antique or fine decorated china
For best washing and drying results
Before loading remove all scraps of food and soak
very heavily soiled pots and pans.
Arrange saucepans, cups and glasses etc. upsidedown.
Tilt items with convex or concave surfaces so that the
water drains off easily.
Avoid contact between the dishes as far as possible.
Wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be
improved.
Empty the lower basket first and then the upper one;
this will avoid water dripping from the upper basket
onto the dishes in the lower one.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes as
soon as the programme finishes.
Certain types of decoration can discolour when
washed in a dishwasher.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
A chemical reaction can occur between silver
cutlery and stainless steel cutlery. As a precaution,
do not wash together.
Iron and cast iron objects can rust and stain other
items.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of
the item.
When buying new dishes, ensure that
they are dishwasher proof.
33
CON04en
Washing programmes
Programme
Degree of soil
and
type of load
Normal 65°C
Normal soil.
with
Crockery and cutlery
prewash
* Quick wash
65°C
Rinse and
Hold
Light soil.
Crockery and
party crockery
Any.
Partial load (to be
completed later in the
day).
Starting position
of the programme
selector
Required
pushbuttons
Recommended quantity
of detergent
in the
on the
dispenser dispenser
lid
Cycle
description
A
On/Off
25 g
5g
Cold prewash
Main wash up to 65°C
2 cold rinses
1 hot rinse
B
On/Off
25 g
/
Main wash up to 65°C
1 cold rinse
1 hot rinse
On/Off
/
/
C
1 cold rinse, (to avoid
food scraps from sticking
together).
* This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery
(except pots) so that you may re-use them promptly.
34
PRO08en
Operating sequence
1.
Check the filters
9.
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
2.
At the end of the washing
programme
At the end of the programme the
dishwasher will automatically stop.
The On/Off indicator light remains on until
the On/Off pushbutton is depressed.
Check that there is rinse aid
and salt
10. Switch off the dishwasher
3.
Load the dishes
Switch off the dishwasher by pressing the
On/Off pushbutton and open the door.
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the
plates, saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
4.
Ensure that the spray arms can
rotate freely.
5.
Measure out detergent
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
In general it is not advisable to open the
door while the machine is working;if the
door is opened however, a safety device
ensures that the machine stops.
Add the required amount of detergent into the
dispenser according to the "Washing
programmes" chart.
Close the detergent dispenser lid.
6.
Close the dishwasher door
7.
Set the programme
Caution
Do not open the door during the hot
phase: this may cause hot water escape.
Care must be taken if the door is opened
during the hot phase or immediately
after a programme has finished, as
steam may escape.
Turn the programme selector dial clockwise until
the letter of the programme you wish to select
corresponds with the programme marker on the
control panel.
8.
Start the programme
Depress the On/Off pushbutton.
The On/Off indicator light will come on and
the machine will start.
35
SEQ09en
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with a
damp cloth.
We recommend every 3 months to run a 65°C wash
programme without dishes using detergen.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To remove the drain filter
- simply pull it out by the handle.
A
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
MA04
Cleaning the large filter
(Every month)
If necessary clean the large filter (B) on both sides
under running water, using a brush.
To remove the large filter
1. Remove the spray arm by pulling it upwards on one
side.
2. Turn the column (C) anticlockwise by 90° and then
slide out the filter.
3. Once cleaned refit it following the above instructions
in reverse order.
4. Ensure the filter is in its original position, the handle
of the drain filter should be pointing towards the
front of the appliance.
90°
B
C
MA05
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.
36
MAN01en
External cleaning
Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary use
only neutral detergents. Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).
Prolonged periods of non-operation
If you are not using the machine for any period of
time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transport.
37
MAN03en
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer.
Before contacting your local Service Force Centre, please carry out the checks listed below.
Symptom
The machine will not start
Solution
●
●
●
The machine does not fill
with water
●
●
●
●
The door has not been properly closed.
The plug is not properly inserted in the power socket.
There is no current at the socket.
Ensure the water tap is open.
Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent. Reposition the hose.
The inlet hose may be blocked. Switch off the water supply
and clean the filter.
The filters are blocked
●
Clean the filters (refer to "Maintenance and cleaning").
The spray arms are not rotating
●
Ensure the crockery is loaded correctly.
The dishwasher will not drain
●
The drain hose may be squashed or bent.
Reposition the hose.
The sink may be blocked. Clear any blockages.
The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
There is no vent in the end of the drain hose.
●
●
●
The machine is noisy
●
●
Dishes are rattling against each other, refer to “Loading
your machine”.
The spray arms are knocking against the dishes. Refer to
"Loading your machine".
The door is difficult to close
●
The dishwasher is not level, or not properly built-in.
Visible lime deposits or white
film on the dishes
●
●
Check that there is salt and that the salt cap is tight.
Check that the right level of the water softener is setted.
The dishes are not quite dry
●
The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
●
The baskets are too full.
The dishes have not been arranged properly.
The spray arms do not rotate
The spray arms are clogged.
The filters are clogged.
Then filters are not in position.
Not enough detergent has been used or it is unsuitable.
The detergent is old or has gone hard.
The salt container cap is not properly closed.
The washing programme selected is too gentle.
●
●
●
●
●
●
●
●
●
38
RIM05en
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model
and serial number. This information can be found on
the rating plate located on the right hand side of the
dishwasher door (see picture).
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
Service and spare parts
This product should be serviced by an
authorised Service engineer, and only
genuine spare parts should be used.
Under no circumstances should you attempt
to repair the machine yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Contact your local Service
Force Centre.
Always insist on genuine spare parts.
39
RIM12en
Hints for test centres
before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse
aid dispenser.
Test standard
EN 50242
Reference programme:
Normal 65°C with prewash
Load:
12 standard place settings
Rinse aid selector:
position 5
Detergent dosage :
25 g in the dispenser
5 g on the dispenser lid
US52
UI49
Arrangement
lower basket
Arrangement
upper basket
Technical specifications
DIMENSIONS
Width
Height with worktop
Height without worktop
Max depth
Max depth with open door
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
WATER SUPPLY PRESSURE
Minimum
Maximum
CAPACITY
60 cm
85 cm
82 cm
60 cm
115.2 cm
220/230 V - 50 Hz
200 W
2100 W
2300 W
50 kPa (0.5 bar)
800 kPa (8 bar)
12 place settings
40
IST07en
Installation instructions
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Remove all packaging before positioning the
machine.
If possible, position the machine next to a water tap
and a drain.
Water supply connections
This dishwasher may be fed with either hot (max.
60°C) or cold water.
Nevertheless we advise you a cold water supply.
A hot water supply is not always efficient with very
soiled crockery as it shortens the washing
programmes.
Feeding the appliance with a hot water supply (max.
60°C) will allow you to obtain considerably shorter
programmes.
The water pressure must be within the limits given in
the technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.
The locknut must be correctly fitted to avoid water
leaks.
Avoid bends or kinks in the hose which could prevent
or slow down the water supply.
If the machine is connected to new pipes or pipes
which have not been used for a long time, you should
run the water for a few minutes before connecting the
inlet hose. This will prevent deposits of sand or rust
clogging the inlet hose filter.
CA17
For making the connection itself, the coupling nut fitted
to the machine’s supply hose is designed to screw
onto either a 3/4" inch gas thread spout, or to a
purpose made quick-coupling tap such as the Pressblock.
41
COL04en
Water outlet hose connection
1
2
3
Ø
Ø
18
21
1. To the sink outlet siphon, securing it if necessary
with a clip.
min 4 cm
The end of the drain hose can be connected in the
following ways:
3. To a stand pipe provided with vent-hole, minimum
internal diameter 4 cm.
min 30 cm
max 100 cm
max 100 cm
2. Hooked over the edge of the sink using the special
curved plastic guide provided.
CS09
The waste connection must be at a height of between
30 cm (minimum) and 100 cm (maximum) from the
bottom of the dishwasher.
The drain hose can face either to the right or left of the
dishwasher
Likewise the internal diameter of the couplings used
for connections to the waste outlet must be no smaller
than the diameter of the hose provided.
+ 2 m max
min 30 cm
max 100 cm
If you use a drain hose extension it must be no longer
than 2 metres and its internal diameter must be no
smaller than the diameter of the hose provided.
max 100 cm
Ø 18
Ø 21
Ensure the hose is not bent or squashed as this could
prevent or slow down the discharge of water.
CS10
The sink plug must not be in place when the
machine is draining as this could cause the water
to siphon back into the machine.
Electrical connection
Before plugging the appliance into the wall socket,
make sure that:
1. The mains voltage corresponds to the voltage given
in the "Technical specifications".
2. The meter, fuses, mains power supply and wall
socket can all take the maximum load required.
Make sure that the socket and plug are compatible
without having to use any type of adaptor. If
necessary, have the domestic wiring system socket
replaced.
Safety standards require the appliance to be
earthed.
The manufacture accepts no liability for
failure to observe the above safety
precautions.
This appliance complies with the following E.E.C. Directives:
- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
42
COL03en
Adjusting the worktop
You can move the worktop forward or backward by 25
mm in order to align the machine with other kitchen
units.
Simply unscrew the two rear retaining screws, move
the top to the required position and then retighten the
screws.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it
under a close fitting sink unit or a pre-existing top,
providing the dimensions of the recess correspond to
those shown in the picture.
Proceed as follows:
- Remove the machine’s worktop by unscrewing the
two rear retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.
IN26
570÷
820
600
Insert the machine after adjusting height and levelling
with the adjustable feet. When inserting the machine,
ensure that the water inlet and drain hoses are not
kinked or squashed.
600
IN05
Levelling
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door will
not catch on the levelling spacers, either side of the
cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly level.
Fitting a decor panel on the door
The door of this machine has frames for fitting a
plastic laminate decor panel in the colour required to
match the dishwasher with the rest of the kitchen
furniture.
If you wish to do this you must provide the panel
yourself, that must have the following dimensions:
Width:
588 mm
Height:
586 mm
Max thickness:
4 mm
To fit the panel
AP01
- Take the door frame off after removing the retaining
screws around the edge.
- Position the panel, refit the frame and tighten the
retaining screws around the edge.
Note:
The panel should be fitted before
positioning the machine.
43
INS08en
Total Chlorine free
152988 65/0
es
en
0/0599